This commit was manufactured by cvs2svn to create tag 'prefifo'.prefifo

Sprout from master 2009-07-24 14:13:44 UTC Corinna Vinschen <corinna@vinschen.de> ' * syscalls.cc (unlink_nt): Ignore sharing violation on NFS. Align' Cherrypick from master 2009-07-24 18:24:57 UTC Corinna Vinschen <corinna@vinschen.de> ' * syscalls.cc (internal_setlocale): Fix typo in GBK codepage.': winsup/cygwin/ChangeLog Delete: COPYING COPYING.LIB COPYING.LIBGLOSS COPYING.NEWLIB COPYING3 COPYING3.LIB ChangeLog MAINTAINERS Makefile.def Makefile.in Makefile.tpl README README-maintainer-mode compile config-ml.in config.guess config.rpath config.sub config/ChangeLog config/acinclude.m4 config/acx.m4 config/bootstrap-O1.mk config/bootstrap-O3.mk config/bootstrap-debug.mk config/codeset.m4 config/depstand.m4 config/enable.m4 config/extensions.m4 config/futex.m4 config/gettext-sister.m4 config/gettext.m4 config/glibc21.m4 config/gxx-include-dir.m4 config/iconv.m4 config/intdiv0.m4 config/inttypes-pri.m4 config/inttypes.m4 config/inttypes_h.m4 config/lcmessage.m4 config/ld-symbolic.m4 config/lead-dot.m4 config/lib-ld.m4 config/lib-link.m4 config/lib-prefix.m4 config/mh-cxux config/mh-cygwin config/mh-decstation config/mh-dgux386 config/mh-djgpp config/mh-interix config/mh-lynxrs6k config/mh-mingw config/mh-ncr3000 config/mh-necv4 config/mh-pa config/mh-pa-hpux10 config/mh-ppc-aix config/mh-ppc-darwin config/mh-sco config/mh-solaris config/mh-sysv4 config/mh-sysv5 config/mh-x86omitfp config/mt-alphaieee config/mt-d30v config/mt-gnu config/mt-mep config/mt-mips-elfoabi config/mt-mips-gnu config/mt-mips16-compat config/mt-netware config/mt-ospace config/mt-sde config/mt-spu config/mt-v810 config/mt-wince config/multi.m4 config/nls.m4 config/no-executables.m4 config/override.m4 config/plugins.m4 config/po.m4 config/proginstall.m4 config/progtest.m4 config/stdint.m4 config/stdint_h.m4 config/tcl.m4 config/tls.m4 config/uintmax_t.m4 config/ulonglong.m4 config/unwind_ipinfo.m4 config/warnings.m4 configure configure.ac depcomp djunpack.bat etc/ChangeLog etc/Makefile.in etc/add-log.el etc/add-log.vi etc/configbuild.ein etc/configbuild.fig etc/configbuild.jin etc/configbuild.tin etc/configdev.ein etc/configdev.fig etc/configdev.jin etc/configdev.tin etc/configure etc/configure.in etc/configure.texi etc/fdl.texi etc/make-stds.texi etc/standards.texi etc/texi2pod.pl include/COPYING include/COPYING3 include/ChangeLog include/ChangeLog-9103 include/MAINTAINERS include/alloca-conf.h include/ansidecl.h include/aout/ChangeLog include/aout/adobe.h include/aout/aout64.h include/aout/ar.h include/aout/dynix3.h include/aout/encap.h include/aout/host.h include/aout/hp.h include/aout/hp300hpux.h include/aout/hppa.h include/aout/ranlib.h include/aout/reloc.h include/aout/stab.def include/aout/stab_gnu.h include/aout/sun4.h include/bfdlink.h include/binary-io.h include/bout.h include/coff/ChangeLog include/coff/ChangeLog-9103 include/coff/alpha.h include/coff/apollo.h include/coff/arm.h include/coff/aux-coff.h include/coff/ecoff.h include/coff/external.h include/coff/go32exe.h include/coff/h8300.h include/coff/h8500.h include/coff/i386.h include/coff/i860.h include/coff/i960.h include/coff/ia64.h include/coff/internal.h include/coff/m68k.h include/coff/m88k.h include/coff/maxq.h include/coff/mcore.h include/coff/mips.h include/coff/mipspe.h include/coff/or32.h include/coff/pe.h include/coff/powerpc.h include/coff/rs6000.h include/coff/rs6k64.h include/coff/sh.h include/coff/sparc.h include/coff/sym.h include/coff/symconst.h include/coff/ti.h include/coff/tic30.h include/coff/tic4x.h include/coff/tic54x.h include/coff/tic80.h include/coff/w65.h include/coff/we32k.h include/coff/x86_64.h include/coff/xcoff.h include/coff/z80.h include/coff/z8k.h include/demangle.h include/dis-asm.h include/dwarf2.h include/dyn-string.h include/elf/ChangeLog include/elf/ChangeLog-9103 include/elf/alpha.h include/elf/arc.h include/elf/arm.h include/elf/avr.h include/elf/bfin.h include/elf/common.h include/elf/cr16.h include/elf/cr16c.h include/elf/cris.h include/elf/crx.h include/elf/d10v.h include/elf/d30v.h include/elf/dlx.h include/elf/dwarf.h include/elf/external.h include/elf/fr30.h include/elf/frv.h include/elf/h8.h include/elf/hppa.h include/elf/i370.h include/elf/i386.h include/elf/i860.h include/elf/i960.h include/elf/ia64.h include/elf/internal.h include/elf/ip2k.h include/elf/iq2000.h include/elf/lm32.h include/elf/m32c.h include/elf/m32r.h include/elf/m68hc11.h include/elf/m68k.h include/elf/mcore.h include/elf/mep.h include/elf/mips.h include/elf/mmix.h include/elf/mn10200.h include/elf/mn10300.h include/elf/moxie.h include/elf/msp430.h include/elf/mt.h include/elf/openrisc.h include/elf/or32.h include/elf/pj.h include/elf/ppc.h include/elf/ppc64.h include/elf/reloc-macros.h include/elf/s390.h include/elf/score.h include/elf/sh.h include/elf/sparc.h include/elf/spu.h include/elf/v850.h include/elf/vax.h include/elf/vxworks.h include/elf/x86-64.h include/elf/xc16x.h include/elf/xstormy16.h include/elf/xtensa.h include/fibheap.h include/filenames.h include/floatformat.h include/fnmatch.h include/fopen-bin.h include/fopen-same.h include/fopen-vms.h include/gdb/ChangeLog include/gdb/callback.h include/gdb/fileio.h include/gdb/remote-sim.h include/gdb/signals.h include/gdb/sim-arm.h include/gdb/sim-cr16.h include/gdb/sim-d10v.h include/gdb/sim-frv.h include/gdb/sim-h8300.h include/gdb/sim-lm32.h include/gdb/sim-m32c.h include/gdb/sim-ppc.h include/gdb/sim-sh.h include/gdbm.h include/getopt.h include/hashtab.h include/hp-symtab.h include/ieee.h include/libiberty.h include/md5.h include/nlm/ChangeLog include/nlm/alpha-ext.h include/nlm/common.h include/nlm/external.h include/nlm/i386-ext.h include/nlm/internal.h include/nlm/ppc-ext.h include/nlm/sparc32-ext.h include/oasys.h include/objalloc.h include/obstack.h include/opcode/ChangeLog include/opcode/ChangeLog-9103 include/opcode/alpha.h include/opcode/arc.h include/opcode/arm.h include/opcode/avr.h include/opcode/bfin.h include/opcode/cgen-bitset.h include/opcode/cgen.h include/opcode/convex.h include/opcode/cr16.h include/opcode/cris.h include/opcode/crx.h include/opcode/d10v.h include/opcode/d30v.h include/opcode/dlx.h include/opcode/h8300.h include/opcode/hppa.h include/opcode/i370.h include/opcode/i386.h include/opcode/i860.h include/opcode/i960.h include/opcode/ia64.h include/opcode/m68hc11.h include/opcode/m68k.h include/opcode/m88k.h include/opcode/maxq.h include/opcode/mips.h include/opcode/mmix.h include/opcode/mn10200.h include/opcode/mn10300.h include/opcode/moxie.h include/opcode/msp430.h include/opcode/np1.h include/opcode/ns32k.h include/opcode/or32.h include/opcode/pdp11.h include/opcode/pj.h include/opcode/pn.h include/opcode/ppc.h include/opcode/pyr.h include/opcode/s390.h include/opcode/score-datadep.h include/opcode/score-inst.h include/opcode/sparc.h include/opcode/spu-insns.h include/opcode/spu.h include/opcode/tahoe.h include/opcode/tic30.h include/opcode/tic4x.h include/opcode/tic54x.h include/opcode/tic80.h include/opcode/v850.h include/opcode/vax.h include/os9k.h include/partition.h include/plugin-api.h include/progress.h include/safe-ctype.h include/sha1.h include/sort.h include/splay-tree.h include/symcat.h include/xregex.h include/xregex2.h include/xtensa-config.h include/xtensa-isa-internal.h include/xtensa-isa.h install-sh libgloss/ChangeLog libgloss/Makefile.in libgloss/README libgloss/acinclude.m4 libgloss/aclocal.m4 libgloss/arm/Makefile.in libgloss/arm/_exit.c libgloss/arm/_kill.c libgloss/arm/aclocal.m4 libgloss/arm/coff-iq80310.specs libgloss/arm/coff-pid.specs libgloss/arm/coff-rdimon.specs libgloss/arm/coff-rdpmon.specs libgloss/arm/coff-redboot.ld libgloss/arm/coff-redboot.specs libgloss/arm/configure libgloss/arm/configure.in libgloss/arm/crt0.S libgloss/arm/elf-iq80310.specs libgloss/arm/elf-linux.specs libgloss/arm/elf-pid.specs libgloss/arm/elf-rdimon.specs libgloss/arm/elf-rdpmon.specs libgloss/arm/elf-redboot.ld libgloss/arm/elf-redboot.specs libgloss/arm/libcfunc.c libgloss/arm/linux-crt0.c libgloss/arm/linux-syscall.h libgloss/arm/linux-syscalls0.S libgloss/arm/linux-syscalls1.c libgloss/arm/redboot-crt0.S libgloss/arm/redboot-syscalls.c libgloss/arm/swi.h libgloss/arm/syscall.h libgloss/arm/syscalls.c libgloss/arm/trap.S libgloss/bfin/Makefile.in libgloss/bfin/aclocal.m4 libgloss/bfin/basiccrt.S libgloss/bfin/bf522.ld libgloss/bfin/bf523.ld libgloss/bfin/bf524.ld libgloss/bfin/bf525.ld libgloss/bfin/bf526.ld libgloss/bfin/bf527.ld libgloss/bfin/bf531.ld libgloss/bfin/bf532.ld libgloss/bfin/bf533.ld libgloss/bfin/bf534.ld libgloss/bfin/bf536.ld libgloss/bfin/bf537.ld libgloss/bfin/bf538.ld libgloss/bfin/bf539.ld libgloss/bfin/bf542.ld libgloss/bfin/bf544.ld libgloss/bfin/bf547.ld libgloss/bfin/bf548.ld libgloss/bfin/bf549.ld libgloss/bfin/bf561.ld libgloss/bfin/bf561a.ld libgloss/bfin/bf561b.ld libgloss/bfin/bf561m.ld libgloss/bfin/bfin-common-mc.ld libgloss/bfin/bfin-common-sc.ld libgloss/bfin/configure libgloss/bfin/configure.in libgloss/bfin/crt0.S libgloss/bfin/include/blackfin.h libgloss/bfin/include/cdefBF522.h libgloss/bfin/include/cdefBF525.h libgloss/bfin/include/cdefBF527.h libgloss/bfin/include/cdefBF52x_base.h libgloss/bfin/include/cdefBF531.h libgloss/bfin/include/cdefBF532.h libgloss/bfin/include/cdefBF533.h libgloss/bfin/include/cdefBF534.h libgloss/bfin/include/cdefBF535.h libgloss/bfin/include/cdefBF536.h libgloss/bfin/include/cdefBF537.h libgloss/bfin/include/cdefBF538.h libgloss/bfin/include/cdefBF539.h libgloss/bfin/include/cdefBF53x.h libgloss/bfin/include/cdefBF541.h libgloss/bfin/include/cdefBF542.h libgloss/bfin/include/cdefBF544.h libgloss/bfin/include/cdefBF547.h libgloss/bfin/include/cdefBF548.h libgloss/bfin/include/cdefBF549.h libgloss/bfin/include/cdefBF54x_base.h libgloss/bfin/include/cdefBF561.h libgloss/bfin/include/cdef_LPBlackfin.h libgloss/bfin/include/cdefblackfin.h libgloss/bfin/include/cplb.h libgloss/bfin/include/cplbtab.h libgloss/bfin/include/defBF522.h libgloss/bfin/include/defBF525.h libgloss/bfin/include/defBF527.h libgloss/bfin/include/defBF52x_base.h libgloss/bfin/include/defBF531.h libgloss/bfin/include/defBF532.h libgloss/bfin/include/defBF533.h libgloss/bfin/include/defBF534.h libgloss/bfin/include/defBF535.h libgloss/bfin/include/defBF536.h libgloss/bfin/include/defBF537.h libgloss/bfin/include/defBF538.h libgloss/bfin/include/defBF539.h libgloss/bfin/include/defBF541.h libgloss/bfin/include/defBF542.h libgloss/bfin/include/defBF544.h libgloss/bfin/include/defBF547.h libgloss/bfin/include/defBF548.h libgloss/bfin/include/defBF549.h libgloss/bfin/include/defBF54x_base.h libgloss/bfin/include/defBF561.h libgloss/bfin/include/def_LPBlackfin.h libgloss/bfin/include/defblackfin.h libgloss/bfin/include/sys/_adi_platform.h libgloss/bfin/include/sys/anomaly_macros_rtl.h libgloss/bfin/include/sys/excause.h libgloss/bfin/include/sys/exception.h libgloss/bfin/include/sys/mc_typedef.h libgloss/bfin/include/sys/platform.h libgloss/bfin/include/sys/pll.h libgloss/bfin/include/sysreg.h libgloss/bfin/syscalls.c libgloss/close.c libgloss/config/default.mh libgloss/config/default.mt libgloss/config/dos.mh libgloss/config/mips.mt libgloss/config/mn10200.mt libgloss/config/mn10300.mt libgloss/config/ppc.mh libgloss/configure libgloss/configure.in libgloss/cris/Makefile.in libgloss/cris/aclocal.m4 libgloss/cris/configure libgloss/cris/configure.in libgloss/cris/crt0.S libgloss/cris/crti.c libgloss/cris/crtn.c libgloss/cris/gensyscalls libgloss/cris/irqtable.S libgloss/cris/lcrt0.c libgloss/cris/linunistd.h libgloss/cris/outbyte.c libgloss/cris/setup.S libgloss/crx/Makefile.in libgloss/crx/_exit.c libgloss/crx/_getenv.c libgloss/crx/_rename.c libgloss/crx/aclocal.m4 libgloss/crx/close.c libgloss/crx/configure libgloss/crx/configure.in libgloss/crx/crt0.S libgloss/crx/crti.S libgloss/crx/crtn.S libgloss/crx/dvz_hndl.c libgloss/crx/flg_hndl.c libgloss/crx/fstat.c libgloss/crx/getpid.c libgloss/crx/iad_hndl.c libgloss/crx/intable.c libgloss/crx/isatty.c libgloss/crx/kill.c libgloss/crx/lseek.c libgloss/crx/open.c libgloss/crx/putnum.c libgloss/crx/read.c libgloss/crx/sbrk.c libgloss/crx/sim.ld libgloss/crx/stat.c libgloss/crx/svc_hndl.c libgloss/crx/time.c libgloss/crx/und_hndl.c libgloss/crx/unlink.c libgloss/crx/write.c libgloss/d30v/Makefile.in libgloss/d30v/aclocal.m4 libgloss/d30v/configure libgloss/d30v/configure.in libgloss/d30v/crt0.S libgloss/d30v/inbyte.c libgloss/d30v/outbyte.c libgloss/d30v/syscalls.c libgloss/debug.c libgloss/debug.h libgloss/doc/Makefile.in libgloss/doc/configure libgloss/doc/configure.in libgloss/doc/porting.texi libgloss/fr30/Makefile.in libgloss/fr30/aclocal.m4 libgloss/fr30/configure libgloss/fr30/configure.in libgloss/fr30/crt0.s libgloss/fr30/syscalls.c libgloss/frv/Makefile.in libgloss/frv/aclocal.m4 libgloss/frv/configure libgloss/frv/configure.in libgloss/frv/crt0.S libgloss/frv/fstat.c libgloss/frv/getpid.c libgloss/frv/isatty.c libgloss/frv/kill.c libgloss/frv/print.c libgloss/frv/putnum.c libgloss/frv/sbrk.c libgloss/frv/sim-close.S libgloss/frv/sim-exit.S libgloss/frv/sim-inbyte.c libgloss/frv/sim-lseek.S libgloss/frv/sim-open.S libgloss/frv/sim-read.S libgloss/frv/sim-time.c libgloss/frv/sim-unlink.S libgloss/frv/sim-write.S libgloss/frv/stat.c libgloss/fstat.c libgloss/getpid.c libgloss/glue.h libgloss/hp74x/Makefile.in libgloss/hp74x/README libgloss/hp74x/aclocal.m4 libgloss/hp74x/checksum.c libgloss/hp74x/configure libgloss/hp74x/configure.in libgloss/hp74x/crt0.s libgloss/hp74x/debugger.h libgloss/hp74x/debugger.s libgloss/hp74x/diagnose.h libgloss/hp74x/hppa-defs.h libgloss/hp74x/hppa.ld libgloss/hp74x/io.c libgloss/hp74x/iva_table.h libgloss/hp74x/iva_table.s libgloss/hp74x/pa_stub.c libgloss/hp74x/test.c libgloss/i386/Makefile.in libgloss/i386/aclocal.m4 libgloss/i386/configure libgloss/i386/configure.in libgloss/i386/cygmon-crt0.S libgloss/i386/cygmon-gmon.c libgloss/i386/cygmon-gmon.h libgloss/i386/cygmon-salib.c libgloss/i386/cygmon-syscall.h libgloss/i386/cygmon.ld libgloss/i960/Makefile.in libgloss/i960/aclocal.m4 libgloss/i960/asm.h libgloss/i960/configure libgloss/i960/configure.in libgloss/i960/crt0.c libgloss/i960/mon-read.c libgloss/i960/mon-syscalls.S libgloss/i960/mon-write.c libgloss/i960/mon960.c libgloss/i960/mon960.ld libgloss/i960/syscall.h libgloss/iq2000/Makefile.in libgloss/iq2000/_exit.c libgloss/iq2000/access.c libgloss/iq2000/aclocal.m4 libgloss/iq2000/chmod.c libgloss/iq2000/chown.c libgloss/iq2000/close.c libgloss/iq2000/configure libgloss/iq2000/configure.in libgloss/iq2000/creat.c libgloss/iq2000/crt0.S libgloss/iq2000/crt1.c libgloss/iq2000/execv.c libgloss/iq2000/execve.c libgloss/iq2000/fork.c libgloss/iq2000/fstat.c libgloss/iq2000/getpid.c libgloss/iq2000/gettime.c libgloss/iq2000/isatty.c libgloss/iq2000/kill.c libgloss/iq2000/lseek.c libgloss/iq2000/open.c libgloss/iq2000/pipe.c libgloss/iq2000/read.c libgloss/iq2000/sbrk.c libgloss/iq2000/sim.ld libgloss/iq2000/stat.c libgloss/iq2000/test.c libgloss/iq2000/time.c libgloss/iq2000/times.c libgloss/iq2000/trap.c libgloss/iq2000/trap.h libgloss/iq2000/unlink.c libgloss/iq2000/utime.c libgloss/iq2000/wait.c libgloss/iq2000/write.c libgloss/isatty.c libgloss/kill.c libgloss/libnosys/Makefile.in libgloss/libnosys/_exit.c libgloss/libnosys/acconfig.h libgloss/libnosys/aclocal.m4 libgloss/libnosys/chown.c libgloss/libnosys/close.c libgloss/libnosys/config.h.in libgloss/libnosys/configure libgloss/libnosys/configure.in libgloss/libnosys/environ.c libgloss/libnosys/errno.c libgloss/libnosys/execve.c libgloss/libnosys/fork.c libgloss/libnosys/fstat.c libgloss/libnosys/getpid.c libgloss/libnosys/gettod.c libgloss/libnosys/isatty.c libgloss/libnosys/kill.c libgloss/libnosys/link.c libgloss/libnosys/lseek.c libgloss/libnosys/open.c libgloss/libnosys/read.c libgloss/libnosys/readlink.c libgloss/libnosys/sbrk.c libgloss/libnosys/stat.c libgloss/libnosys/symlink.c libgloss/libnosys/times.c libgloss/libnosys/unlink.c libgloss/libnosys/wait.c libgloss/libnosys/warning.h libgloss/libnosys/write.c libgloss/lm32/Makefile.in libgloss/lm32/aclocal.m4 libgloss/lm32/configure libgloss/lm32/configure.in libgloss/lm32/crt0.S libgloss/lm32/isatty.c libgloss/lm32/scall.S libgloss/lm32/sim.ld libgloss/lseek.c libgloss/m32c/Makefile.in libgloss/m32c/abort.S libgloss/m32c/aclocal.m4 libgloss/m32c/argv.S libgloss/m32c/argvlen.S libgloss/m32c/chdir.S libgloss/m32c/chmod.S libgloss/m32c/close.S libgloss/m32c/configure libgloss/m32c/configure.in libgloss/m32c/crt0.S libgloss/m32c/crtn.S libgloss/m32c/exit.S libgloss/m32c/fstat.S libgloss/m32c/genscript libgloss/m32c/getpid.S libgloss/m32c/gettimeofday.S libgloss/m32c/heaptop.S libgloss/m32c/isatty.S libgloss/m32c/kill.S libgloss/m32c/link.S libgloss/m32c/lseek.S libgloss/m32c/m32c.tmpl libgloss/m32c/m32csys.h libgloss/m32c/open.S libgloss/m32c/read.S libgloss/m32c/sample.c libgloss/m32c/sbrk.c libgloss/m32c/stat.S libgloss/m32c/time.S libgloss/m32c/times.S libgloss/m32c/unlink.S libgloss/m32c/utime.S libgloss/m32c/varvects.S libgloss/m32c/varvects.h libgloss/m32c/write.S libgloss/m32r/Makefile.in libgloss/m32r/aclocal.m4 libgloss/m32r/chmod.c libgloss/m32r/close.c libgloss/m32r/configure libgloss/m32r/configure.in libgloss/m32r/crt0.S libgloss/m32r/eit.h libgloss/m32r/eva-stub.ld libgloss/m32r/eva.ld libgloss/m32r/exit.c libgloss/m32r/fstat.c libgloss/m32r/getpid.c libgloss/m32r/isatty.c libgloss/m32r/kill.c libgloss/m32r/lseek.c libgloss/m32r/m32r-lib.c libgloss/m32r/m32r-stub.c libgloss/m32r/mon.specs libgloss/m32r/open.c libgloss/m32r/raise.c libgloss/m32r/read.c libgloss/m32r/sbrk.c libgloss/m32r/stat.c libgloss/m32r/trap0.S libgloss/m32r/trapmon0.c libgloss/m32r/unlink.c libgloss/m32r/utime.c libgloss/m32r/write.c libgloss/m68hc11/Makefile.in libgloss/m68hc11/aclocal.m4 libgloss/m68hc11/configure libgloss/m68hc11/configure.in libgloss/m68hc11/crt0.S libgloss/m68hc11/sci-inout.S libgloss/m68hc11/sim-valid-m68hc11.ld libgloss/m68hc11/sim-valid-m68hc12.ld libgloss/m68hc11/syscalls.c libgloss/m68k/Makefile.in libgloss/m68k/README libgloss/m68k/aclocal.m4 libgloss/m68k/asm.h libgloss/m68k/bcc.ld libgloss/m68k/cf-crt0.S libgloss/m68k/cf-crt1.c libgloss/m68k/cf-exit.c libgloss/m68k/cf-hosted.S libgloss/m68k/cf-isrs.c libgloss/m68k/cf-isv.S libgloss/m68k/cf-sbrk.c libgloss/m68k/cf.sc libgloss/m68k/configure libgloss/m68k/configure.in libgloss/m68k/cpu32bug.S libgloss/m68k/cpu32bug.h libgloss/m68k/crt0.S libgloss/m68k/dtor.C libgloss/m68k/fido-_exit.c libgloss/m68k/fido-crt0.S libgloss/m68k/fido-handler.c libgloss/m68k/fido-hosted.S libgloss/m68k/fido-sbrk.c libgloss/m68k/fido.h libgloss/m68k/fido.sc libgloss/m68k/fido_profiling.h libgloss/m68k/idp-inbyte.c libgloss/m68k/idp-outbyte.c libgloss/m68k/idp.ld libgloss/m68k/idpgdb.ld libgloss/m68k/io-close.c libgloss/m68k/io-exit.c libgloss/m68k/io-fstat.c libgloss/m68k/io-gdb.c libgloss/m68k/io-gettimeofday.c libgloss/m68k/io-isatty.c libgloss/m68k/io-lseek.c libgloss/m68k/io-open.c libgloss/m68k/io-read.c libgloss/m68k/io-rename.c libgloss/m68k/io-stat.c libgloss/m68k/io-system.c libgloss/m68k/io-time.c libgloss/m68k/io-unlink.c libgloss/m68k/io-write.c libgloss/m68k/io.h libgloss/m68k/leds.c libgloss/m68k/leds.h libgloss/m68k/mc68681reg.h libgloss/m68k/mc68ec.c libgloss/m68k/mvme-stub.c libgloss/m68k/mvme.S libgloss/m68k/mvme135-asm.S libgloss/m68k/mvme135.ld libgloss/m68k/mvme162.ld libgloss/m68k/mvme162lx-asm.S libgloss/m68k/sbc5204.ld libgloss/m68k/sbc5206.ld libgloss/m68k/sim-abort.c libgloss/m68k/sim-crt0.S libgloss/m68k/sim-errno.c libgloss/m68k/sim-funcs.c libgloss/m68k/sim-inbyte.c libgloss/m68k/sim-print.c libgloss/m68k/sim-sbrk.c libgloss/m68k/sim.ld libgloss/m68k/simulator.S libgloss/m68k/test.c libgloss/mcore/Makefile.in libgloss/mcore/aclocal.m4 libgloss/mcore/close.c libgloss/mcore/cmb-exit.c libgloss/mcore/cmb-inbyte.c libgloss/mcore/cmb-outbyte.c libgloss/mcore/configure libgloss/mcore/configure.in libgloss/mcore/crt0.S libgloss/mcore/elf-cmb.ld libgloss/mcore/elf-cmb.specs libgloss/mcore/fstat.c libgloss/mcore/getpid.c libgloss/mcore/kill.c libgloss/mcore/lseek.c libgloss/mcore/open.c libgloss/mcore/pe-cmb.ld libgloss/mcore/pe-cmb.specs libgloss/mcore/print.c libgloss/mcore/putnum.c libgloss/mcore/raise.c libgloss/mcore/read.c libgloss/mcore/sbrk.c libgloss/mcore/stat.c libgloss/mcore/syscalls.S libgloss/mcore/unlink.c libgloss/mcore/write.c libgloss/mep/Makefile.in libgloss/mep/aclocal.m4 libgloss/mep/configure libgloss/mep/configure.in libgloss/mep/crt0.S libgloss/mep/crtn.S libgloss/mep/default.ld libgloss/mep/fmax.ld libgloss/mep/gcov-io.h libgloss/mep/gmap_default.ld libgloss/mep/h_reset.c libgloss/mep/handlers.c libgloss/mep/isatty.c libgloss/mep/mep-bb.c libgloss/mep/mep-gmon.c libgloss/mep/min.ld libgloss/mep/read.c libgloss/mep/sbrk.c libgloss/mep/sdram-crt0.S libgloss/mep/sim-crt0.S libgloss/mep/sim-crtn.S libgloss/mep/simnovec-crt0.S libgloss/mep/simple.ld libgloss/mep/simsdram-crt0.S libgloss/mep/syscalls.S libgloss/mep/write.c libgloss/mips/Makefile.in libgloss/mips/aclocal.m4 libgloss/mips/array-io.c libgloss/mips/array.ld libgloss/mips/cfe.c libgloss/mips/cfe.ld libgloss/mips/cfe_api.c libgloss/mips/cfe_api.h libgloss/mips/cfe_api_int.h libgloss/mips/cfe_error.h libgloss/mips/cfe_mem.c libgloss/mips/cma101.c libgloss/mips/configure libgloss/mips/configure.in libgloss/mips/crt0.S libgloss/mips/crt0_cfe.S libgloss/mips/crt0_cygmon.S libgloss/mips/cygmon.c libgloss/mips/ddb-kseg0.ld libgloss/mips/ddb.ld libgloss/mips/dtor.C libgloss/mips/dve.ld libgloss/mips/dvemon.c libgloss/mips/entry.S libgloss/mips/idt.ld libgloss/mips/idt32.ld libgloss/mips/idt64.ld libgloss/mips/idtecoff.ld libgloss/mips/idtmon.S libgloss/mips/jmr3904-io.c libgloss/mips/jmr3904app-java.ld libgloss/mips/jmr3904app.ld libgloss/mips/jmr3904dram-java.ld libgloss/mips/jmr3904dram.ld libgloss/mips/lsi.ld libgloss/mips/lsipmon.S libgloss/mips/nullmon.c libgloss/mips/nullmon.ld libgloss/mips/pmon.S libgloss/mips/pmon.ld libgloss/mips/regs.S libgloss/mips/syscalls.c libgloss/mips/test.c libgloss/mips/vr4300.S libgloss/mips/vr5xxx.S libgloss/mn10200/Makefile.in libgloss/mn10200/_exit.c libgloss/mn10200/access.c libgloss/mn10200/aclocal.m4 libgloss/mn10200/chmod.c libgloss/mn10200/chown.c libgloss/mn10200/close.c libgloss/mn10200/configure libgloss/mn10200/configure.in libgloss/mn10200/creat.c libgloss/mn10200/crt0.S libgloss/mn10200/crt1.c libgloss/mn10200/eval.ld libgloss/mn10200/execv.c libgloss/mn10200/execve.c libgloss/mn10200/fork.c libgloss/mn10200/fstat.c libgloss/mn10200/getpid.c libgloss/mn10200/gettime.c libgloss/mn10200/isatty.c libgloss/mn10200/kill.c libgloss/mn10200/lseek.c libgloss/mn10200/open.c libgloss/mn10200/pipe.c libgloss/mn10200/read.c libgloss/mn10200/sbrk.c libgloss/mn10200/sim.ld libgloss/mn10200/stat.c libgloss/mn10200/test.c libgloss/mn10200/time.c libgloss/mn10200/times.c libgloss/mn10200/trap.S libgloss/mn10200/trap.h libgloss/mn10200/unlink.c libgloss/mn10200/utime.c libgloss/mn10200/wait.c libgloss/mn10200/write.c libgloss/mn10300/Makefile.in libgloss/mn10300/_exit.c libgloss/mn10300/access.c libgloss/mn10300/aclocal.m4 libgloss/mn10300/asb2303.ld libgloss/mn10300/asb2305.ld libgloss/mn10300/chmod.c libgloss/mn10300/chown.c libgloss/mn10300/close.c libgloss/mn10300/configure libgloss/mn10300/configure.in libgloss/mn10300/creat.c libgloss/mn10300/crt0-eval.S libgloss/mn10300/crt0.S libgloss/mn10300/crt0_cygmon.S libgloss/mn10300/crt0_redboot.S libgloss/mn10300/crt1.c libgloss/mn10300/cygmon.c libgloss/mn10300/eval.ld libgloss/mn10300/execv.c libgloss/mn10300/execve.c libgloss/mn10300/fork.c libgloss/mn10300/fstat.c libgloss/mn10300/getpid.c libgloss/mn10300/gettime.c libgloss/mn10300/isatty.c libgloss/mn10300/kill.c libgloss/mn10300/lseek.c libgloss/mn10300/open.c libgloss/mn10300/pipe.c libgloss/mn10300/read.c libgloss/mn10300/sbrk.c libgloss/mn10300/sim.ld libgloss/mn10300/stat.c libgloss/mn10300/test.c libgloss/mn10300/time.c libgloss/mn10300/times.c libgloss/mn10300/trap.S libgloss/mn10300/trap.h libgloss/mn10300/unlink.c libgloss/mn10300/utime.c libgloss/mn10300/wait.c libgloss/mn10300/write.c libgloss/moxie/Makefile.in libgloss/moxie/aclocal.m4 libgloss/moxie/configure libgloss/moxie/configure.in libgloss/moxie/crt0.S libgloss/moxie/fstat.c libgloss/moxie/getpid.c libgloss/moxie/isatty.c libgloss/moxie/kill.c libgloss/moxie/moxie-elf-common.ld libgloss/moxie/print.c libgloss/moxie/putnum.c libgloss/moxie/qemu-time.c libgloss/moxie/qemu-write.c libgloss/moxie/qemu.ld libgloss/moxie/sbrk.c libgloss/moxie/sim-close.S libgloss/moxie/sim-exit.S libgloss/moxie/sim-inbyte.c libgloss/moxie/sim-lseek.S libgloss/moxie/sim-lseek.c libgloss/moxie/sim-open.S libgloss/moxie/sim-read.S libgloss/moxie/sim-time.c libgloss/moxie/sim-unlink.S libgloss/moxie/sim-write.S libgloss/moxie/sim.ld libgloss/moxie/stat.c libgloss/mt/16-002.ld libgloss/mt/16-003.ld libgloss/mt/64-001.ld libgloss/mt/Makefile.in libgloss/mt/access.c libgloss/mt/aclocal.m4 libgloss/mt/chmod.c libgloss/mt/close.c libgloss/mt/configure libgloss/mt/configure.in libgloss/mt/crt0-16-002.S libgloss/mt/crt0-16-003.S libgloss/mt/crt0-64-001.S libgloss/mt/crt0-ms2.S libgloss/mt/crt0.S libgloss/mt/exit-16-002.c libgloss/mt/exit-16-003.c libgloss/mt/exit-64-001.c libgloss/mt/exit-ms2.c libgloss/mt/exit.c libgloss/mt/fstat.c libgloss/mt/getpid.c libgloss/mt/gettime.c libgloss/mt/isatty.c libgloss/mt/kill.c libgloss/mt/lseek.c libgloss/mt/ms2.ld libgloss/mt/open.c libgloss/mt/read.c libgloss/mt/sbrk.c libgloss/mt/startup-16-002.S libgloss/mt/startup-16-003.S libgloss/mt/startup-64-001.S libgloss/mt/startup-ms2.S libgloss/mt/stat.c libgloss/mt/time.c libgloss/mt/times.c libgloss/mt/trap.S libgloss/mt/trap.h libgloss/mt/unlink.c libgloss/mt/utime.c libgloss/mt/write.c libgloss/open.c libgloss/pa/Makefile.in libgloss/pa/README libgloss/pa/aclocal.m4 libgloss/pa/configure libgloss/pa/configure.in libgloss/pa/crt0.S libgloss/pa/hp-milli.s libgloss/pa/op50n-io.S libgloss/pa/op50n.h libgloss/pa/op50n.ld libgloss/pa/op50nled.c libgloss/pa/setjmp.S libgloss/pa/test.c libgloss/pa/w89k-io.c libgloss/pa/w89k.h libgloss/pa/w89k.ld libgloss/print.c libgloss/putnum.c libgloss/read.c libgloss/rs6000/Makefile.in libgloss/rs6000/aclocal.m4 libgloss/rs6000/ads-exit.S libgloss/rs6000/ads-io.c libgloss/rs6000/ads.ld libgloss/rs6000/configure libgloss/rs6000/configure.in libgloss/rs6000/crt0.S libgloss/rs6000/mbx-exit.c libgloss/rs6000/mbx-inbyte.c libgloss/rs6000/mbx-outbyte.c libgloss/rs6000/mbx-print.c libgloss/rs6000/mbx.ld libgloss/rs6000/mbx.specs libgloss/rs6000/mcount.S libgloss/rs6000/mvme-errno.c libgloss/rs6000/mvme-exit.S libgloss/rs6000/mvme-inbyte.S libgloss/rs6000/mvme-outbyte.S libgloss/rs6000/mvme-print.c libgloss/rs6000/mvme-read.c libgloss/rs6000/sim-abort.c libgloss/rs6000/sim-crt0.S libgloss/rs6000/sim-errno.c libgloss/rs6000/sim-getrusage.S libgloss/rs6000/sim-inbyte.c libgloss/rs6000/sim-print.c libgloss/rs6000/sim-sbrk.c libgloss/rs6000/simulator.S libgloss/rs6000/sol-cfuncs.c libgloss/rs6000/sol-syscall.S libgloss/rs6000/test.c libgloss/rs6000/xil-crt0.S libgloss/rs6000/xilinx.ld libgloss/rs6000/xilinx440.ld libgloss/rs6000/yellowknife.ld libgloss/sbrk.c libgloss/sh/sh1lcevb.ld libgloss/sh/sh2lcevb.ld libgloss/sh/sh3bb.ld libgloss/sh/sh3lcevb.ld libgloss/sparc/Makefile.in libgloss/sparc/aclocal.m4 libgloss/sparc/asm.h libgloss/sparc/cache.c libgloss/sparc/configure libgloss/sparc/configure.in libgloss/sparc/crt0-701.S libgloss/sparc/crt0.S libgloss/sparc/cygmon-crt0.S libgloss/sparc/cygmon-salib.c libgloss/sparc/cygmon-sparc64-ld.src libgloss/sparc/cygmon.ld.src libgloss/sparc/dtor.C libgloss/sparc/elfsim.ld libgloss/sparc/erc32-crt0.S libgloss/sparc/erc32-io.c libgloss/sparc/erc32-stub.c libgloss/sparc/erc32.ld libgloss/sparc/ex930.ld libgloss/sparc/ex931.ld libgloss/sparc/ex934.ld libgloss/sparc/fixctors.c libgloss/sparc/libsys/Makefile.in libgloss/sparc/libsys/_exit.S libgloss/sparc/libsys/aclocal.m4 libgloss/sparc/libsys/cerror.S libgloss/sparc/libsys/configure libgloss/sparc/libsys/configure.in libgloss/sparc/libsys/isatty.c libgloss/sparc/libsys/libsys-crt0.S libgloss/sparc/libsys/sbrk.S libgloss/sparc/libsys/syscall.h libgloss/sparc/libsys/syscallasm.h libgloss/sparc/libsys/template.S libgloss/sparc/libsys/template_r.S libgloss/sparc/salib-701.c libgloss/sparc/salib.c libgloss/sparc/slite.h libgloss/sparc/sparc-stub.c libgloss/sparc/sparc86x.ld libgloss/sparc/sparcl-stub.c libgloss/sparc/sparclet-stub.c libgloss/sparc/sparclite.h libgloss/sparc/sysc-701.c libgloss/sparc/syscalls.c libgloss/sparc/test.c libgloss/sparc/traps.S libgloss/sparc/tsc701.ld libgloss/spu/Makefile.in libgloss/spu/access.c libgloss/spu/aclocal.m4 libgloss/spu/chdir.c libgloss/spu/chmod.c libgloss/spu/chown.c libgloss/spu/close.c libgloss/spu/configure libgloss/spu/configure.in libgloss/spu/conv_stat.c libgloss/spu/crt0.S libgloss/spu/crti.S libgloss/spu/crtn.S libgloss/spu/dirfuncs.c libgloss/spu/dup.c libgloss/spu/dup2.c libgloss/spu/exit.c libgloss/spu/fchdir.c libgloss/spu/fchmod.c libgloss/spu/fchown.c libgloss/spu/fdatasync.c libgloss/spu/fstat.c libgloss/spu/fsync.c libgloss/spu/ftruncate.c libgloss/spu/getcwd.c libgloss/spu/getitimer.c libgloss/spu/getpagesize.c libgloss/spu/getpid.c libgloss/spu/gettimeofday.c libgloss/spu/isatty.c libgloss/spu/jsre.h libgloss/spu/kill.c libgloss/spu/lchown.c libgloss/spu/link.c libgloss/spu/linux_getpid.c libgloss/spu/linux_gettid.c libgloss/spu/linux_syscalls.c libgloss/spu/lockf.c libgloss/spu/lseek.c libgloss/spu/lstat.c libgloss/spu/mkdir.c libgloss/spu/mknod.c libgloss/spu/mkstemp.c libgloss/spu/mktemp.c libgloss/spu/mmap_eaddr.c libgloss/spu/mremap_eaddr.c libgloss/spu/msync_eaddr.c libgloss/spu/munmap_eaddr.c libgloss/spu/nanosleep.c libgloss/spu/open.c libgloss/spu/pread.c libgloss/spu/pwrite.c libgloss/spu/read.c libgloss/spu/readlink.c libgloss/spu/readv.c libgloss/spu/rmdir.c libgloss/spu/sbrk.c libgloss/spu/sched_yield.c libgloss/spu/setitimer.c libgloss/spu/shm_open.c libgloss/spu/shm_unlink.c libgloss/spu/stat.c libgloss/spu/symlink.c libgloss/spu/sync.c libgloss/spu/syscalls.c libgloss/spu/times.c libgloss/spu/truncate.c libgloss/spu/umask.c libgloss/spu/unlink.c libgloss/spu/utime.c libgloss/spu/utimes.c libgloss/spu/write.c libgloss/spu/writev.c libgloss/stat.c libgloss/syscall.h libgloss/testsuite/Makefile.in libgloss/testsuite/config/hppa.mt libgloss/testsuite/config/m68k.mt libgloss/testsuite/config/mips.mt libgloss/testsuite/config/support.c libgloss/testsuite/configure.in libgloss/testsuite/lib/libgloss.exp libgloss/testsuite/libgloss.all/.gdbinit libgloss/testsuite/libgloss.all/Makefile.in libgloss/testsuite/libgloss.all/array.c libgloss/testsuite/libgloss.all/configure.in libgloss/testsuite/libgloss.all/div.c libgloss/testsuite/libgloss.all/double.c libgloss/testsuite/libgloss.all/float.c libgloss/testsuite/libgloss.all/func.c libgloss/testsuite/libgloss.all/io.c libgloss/testsuite/libgloss.all/math.c libgloss/testsuite/libgloss.all/memory.c libgloss/testsuite/libgloss.all/misc.c libgloss/testsuite/libgloss.all/printf.c libgloss/testsuite/libgloss.all/struct.c libgloss/testsuite/libgloss.all/varargs.c libgloss/testsuite/libgloss.all/varargs2.c libgloss/unlink.c libgloss/v850/sys/syscall.h libgloss/wince/Makefile.am libgloss/wince/Makefile.in libgloss/wince/aclocal.m4 libgloss/wince/configure libgloss/wince/configure.in libgloss/write.c libgloss/xstormy16/Makefile.in libgloss/xstormy16/aclocal.m4 libgloss/xstormy16/close.c libgloss/xstormy16/configure libgloss/xstormy16/configure.in libgloss/xstormy16/crt0.s libgloss/xstormy16/crt0_stub.s libgloss/xstormy16/crti.s libgloss/xstormy16/crtn.s libgloss/xstormy16/eva_app.c libgloss/xstormy16/eva_app.ld libgloss/xstormy16/eva_stub.ld libgloss/xstormy16/fstat.c libgloss/xstormy16/getpid.c libgloss/xstormy16/isatty.c libgloss/xstormy16/kill.c libgloss/xstormy16/lseek.c libgloss/xstormy16/open.c libgloss/xstormy16/sim_high.ld libgloss/xstormy16/sim_malloc_start.s libgloss/xstormy16/sim_rom.ld libgloss/xstormy16/stat.c libgloss/xstormy16/syscalls.S libgloss/xstormy16/syscalls.m4 libgloss/xstormy16/unlink.c libgloss/xstormy16/xstormy16_stub.c libtool.m4 ltgcc.m4 ltmain.sh ltoptions.m4 ltsugar.m4 ltversion.m4 lt~obsolete.m4 makefile.vms missing mkdep mkinstalldirs move-if-change newlib/ChangeLog newlib/HOWTO newlib/MAINTAINERS newlib/Makefile.am newlib/Makefile.in newlib/Makefile.shared newlib/NEWS newlib/README newlib/acconfig.h newlib/acinclude.m4 newlib/aclocal.m4 newlib/configure newlib/configure.host newlib/configure.in newlib/confsubdir.m4 newlib/doc/Makefile.am newlib/doc/Makefile.in newlib/doc/aclocal.m4 newlib/doc/ansidecl.h newlib/doc/configure newlib/doc/configure.in newlib/doc/doc.str newlib/doc/makedoc.c newlib/iconvdata/EUC-JP.irreversible newlib/iconvdata/Makefile.am newlib/iconvdata/Makefile.in newlib/iconvdata/SJIS.irreversible newlib/iconvdata/aclocal.m4 newlib/iconvdata/configure newlib/iconvdata/configure.in newlib/iconvdata/dummy.c newlib/iconvdata/euc-jp.c newlib/iconvdata/gconv-modules newlib/iconvdata/jis0201.c newlib/iconvdata/jis0201.h newlib/iconvdata/jis0208.c newlib/iconvdata/jis0208.h newlib/iconvdata/jis0212.c newlib/iconvdata/jis0212.h newlib/iconvdata/sjis.c newlib/libc/Makefile.am newlib/libc/Makefile.in newlib/libc/aclocal.m4 newlib/libc/argz/Makefile.am newlib/libc/argz/Makefile.in newlib/libc/argz/argz_add.c newlib/libc/argz/argz_add_sep.c newlib/libc/argz/argz_append.c newlib/libc/argz/argz_count.c newlib/libc/argz/argz_create.c newlib/libc/argz/argz_create_sep.c newlib/libc/argz/argz_delete.c newlib/libc/argz/argz_extract.c newlib/libc/argz/argz_insert.c newlib/libc/argz/argz_next.c newlib/libc/argz/argz_replace.c newlib/libc/argz/argz_stringify.c newlib/libc/argz/buf_findstr.c newlib/libc/argz/buf_findstr.h newlib/libc/argz/dummy.c newlib/libc/argz/envz_add.c newlib/libc/argz/envz_entry.c newlib/libc/argz/envz_get.c newlib/libc/argz/envz_merge.c newlib/libc/argz/envz_remove.c newlib/libc/argz/envz_strip.c newlib/libc/configure newlib/libc/configure.in newlib/libc/ctype/Makefile.am newlib/libc/ctype/Makefile.in newlib/libc/ctype/ctype.tex newlib/libc/ctype/ctype_.c newlib/libc/ctype/ctype_cp.h newlib/libc/ctype/ctype_iso.h newlib/libc/ctype/isalnum.c newlib/libc/ctype/isalpha.c newlib/libc/ctype/isascii.c newlib/libc/ctype/isblank.c newlib/libc/ctype/iscntrl.c newlib/libc/ctype/isdigit.c newlib/libc/ctype/islower.c newlib/libc/ctype/isprint.c newlib/libc/ctype/ispunct.c newlib/libc/ctype/isspace.c newlib/libc/ctype/isupper.c newlib/libc/ctype/iswalnum.c newlib/libc/ctype/iswalpha.c newlib/libc/ctype/iswblank.c newlib/libc/ctype/iswcntrl.c newlib/libc/ctype/iswctype.c newlib/libc/ctype/iswdigit.c newlib/libc/ctype/iswgraph.c newlib/libc/ctype/iswlower.c newlib/libc/ctype/iswprint.c newlib/libc/ctype/iswpunct.c newlib/libc/ctype/iswspace.c newlib/libc/ctype/iswupper.c newlib/libc/ctype/iswxdigit.c newlib/libc/ctype/isxdigit.c newlib/libc/ctype/jp2uc.c newlib/libc/ctype/jp2uc.h newlib/libc/ctype/local.h newlib/libc/ctype/toascii.c newlib/libc/ctype/tolower.c newlib/libc/ctype/toupper.c newlib/libc/ctype/towctrans.c newlib/libc/ctype/towlower.c newlib/libc/ctype/towupper.c newlib/libc/ctype/utf8alpha.h newlib/libc/ctype/utf8print.h newlib/libc/ctype/utf8punct.h newlib/libc/ctype/wctrans.c newlib/libc/ctype/wctype.c newlib/libc/errno/Makefile.am newlib/libc/errno/Makefile.in newlib/libc/errno/errno.c newlib/libc/iconv/Makefile.am newlib/libc/iconv/Makefile.in newlib/libc/iconv/ccs/Makefile.am newlib/libc/iconv/ccs/Makefile.in newlib/libc/iconv/ccs/big5.c newlib/libc/iconv/ccs/binary/Makefile.am newlib/libc/iconv/ccs/binary/Makefile.in newlib/libc/iconv/ccs/binary/big5.cct newlib/libc/iconv/ccs/binary/cns11643_plane1.cct newlib/libc/iconv/ccs/binary/cns11643_plane14.cct newlib/libc/iconv/ccs/binary/cns11643_plane2.cct newlib/libc/iconv/ccs/binary/cp775.cct newlib/libc/iconv/ccs/binary/cp850.cct newlib/libc/iconv/ccs/binary/cp852.cct newlib/libc/iconv/ccs/binary/cp855.cct newlib/libc/iconv/ccs/binary/cp866.cct newlib/libc/iconv/ccs/binary/iso_8859_1.cct newlib/libc/iconv/ccs/binary/iso_8859_10.cct newlib/libc/iconv/ccs/binary/iso_8859_11.cct newlib/libc/iconv/ccs/binary/iso_8859_13.cct newlib/libc/iconv/ccs/binary/iso_8859_14.cct newlib/libc/iconv/ccs/binary/iso_8859_15.cct newlib/libc/iconv/ccs/binary/iso_8859_2.cct newlib/libc/iconv/ccs/binary/iso_8859_3.cct newlib/libc/iconv/ccs/binary/iso_8859_4.cct newlib/libc/iconv/ccs/binary/iso_8859_5.cct newlib/libc/iconv/ccs/binary/iso_8859_6.cct newlib/libc/iconv/ccs/binary/iso_8859_7.cct newlib/libc/iconv/ccs/binary/iso_8859_8.cct newlib/libc/iconv/ccs/binary/iso_8859_9.cct newlib/libc/iconv/ccs/binary/iso_ir_111.cct newlib/libc/iconv/ccs/binary/jis_x0201_1976.cct newlib/libc/iconv/ccs/binary/jis_x0208_1990.cct newlib/libc/iconv/ccs/binary/jis_x0212_1990.cct newlib/libc/iconv/ccs/binary/koi8_r.cct newlib/libc/iconv/ccs/binary/koi8_ru.cct newlib/libc/iconv/ccs/binary/koi8_u.cct newlib/libc/iconv/ccs/binary/koi8_uni.cct newlib/libc/iconv/ccs/binary/ksx1001.cct newlib/libc/iconv/ccs/binary/win_1250.cct newlib/libc/iconv/ccs/binary/win_1251.cct newlib/libc/iconv/ccs/binary/win_1252.cct newlib/libc/iconv/ccs/binary/win_1253.cct newlib/libc/iconv/ccs/binary/win_1254.cct newlib/libc/iconv/ccs/binary/win_1255.cct newlib/libc/iconv/ccs/binary/win_1256.cct newlib/libc/iconv/ccs/binary/win_1257.cct newlib/libc/iconv/ccs/binary/win_1258.cct newlib/libc/iconv/ccs/ccs.h newlib/libc/iconv/ccs/ccsbi.c newlib/libc/iconv/ccs/ccsbi.h newlib/libc/iconv/ccs/ccsnames.h newlib/libc/iconv/ccs/cns11643_plane1.c newlib/libc/iconv/ccs/cns11643_plane14.c newlib/libc/iconv/ccs/cns11643_plane2.c newlib/libc/iconv/ccs/cp775.c newlib/libc/iconv/ccs/cp850.c newlib/libc/iconv/ccs/cp852.c newlib/libc/iconv/ccs/cp855.c newlib/libc/iconv/ccs/cp866.c newlib/libc/iconv/ccs/iso_8859_1.c newlib/libc/iconv/ccs/iso_8859_10.c newlib/libc/iconv/ccs/iso_8859_11.c newlib/libc/iconv/ccs/iso_8859_13.c newlib/libc/iconv/ccs/iso_8859_14.c newlib/libc/iconv/ccs/iso_8859_15.c newlib/libc/iconv/ccs/iso_8859_2.c newlib/libc/iconv/ccs/iso_8859_3.c newlib/libc/iconv/ccs/iso_8859_4.c newlib/libc/iconv/ccs/iso_8859_5.c newlib/libc/iconv/ccs/iso_8859_6.c newlib/libc/iconv/ccs/iso_8859_7.c newlib/libc/iconv/ccs/iso_8859_8.c newlib/libc/iconv/ccs/iso_8859_9.c newlib/libc/iconv/ccs/iso_ir_111.c newlib/libc/iconv/ccs/jis_x0201_1976.c newlib/libc/iconv/ccs/jis_x0208_1990.c newlib/libc/iconv/ccs/jis_x0212_1990.c newlib/libc/iconv/ccs/koi8_r.c newlib/libc/iconv/ccs/koi8_ru.c newlib/libc/iconv/ccs/koi8_u.c newlib/libc/iconv/ccs/koi8_uni.c newlib/libc/iconv/ccs/ksx1001.c newlib/libc/iconv/ccs/mktbl.pl newlib/libc/iconv/ccs/win_1250.c newlib/libc/iconv/ccs/win_1251.c newlib/libc/iconv/ccs/win_1252.c newlib/libc/iconv/ccs/win_1253.c newlib/libc/iconv/ccs/win_1254.c newlib/libc/iconv/ccs/win_1255.c newlib/libc/iconv/ccs/win_1256.c newlib/libc/iconv/ccs/win_1257.c newlib/libc/iconv/ccs/win_1258.c newlib/libc/iconv/ces/Makefile.am newlib/libc/iconv/ces/Makefile.in newlib/libc/iconv/ces/cesbi.c newlib/libc/iconv/ces/cesbi.h newlib/libc/iconv/ces/cesdeps.h newlib/libc/iconv/ces/euc.c newlib/libc/iconv/ces/mkdeps.pl newlib/libc/iconv/ces/table-pcs.c newlib/libc/iconv/ces/table.c newlib/libc/iconv/ces/ucs-2-internal.c newlib/libc/iconv/ces/ucs-2.c newlib/libc/iconv/ces/ucs-4-internal.c newlib/libc/iconv/ces/ucs-4.c newlib/libc/iconv/ces/us-ascii.c newlib/libc/iconv/ces/utf-16.c newlib/libc/iconv/ces/utf-8.c newlib/libc/iconv/encoding.aliases newlib/libc/iconv/iconv.tex newlib/libc/iconv/lib/Makefile.am newlib/libc/iconv/lib/Makefile.in newlib/libc/iconv/lib/aliasesbi.c newlib/libc/iconv/lib/aliasesi.c newlib/libc/iconv/lib/conv.h newlib/libc/iconv/lib/encnames.h newlib/libc/iconv/lib/encoding.deps newlib/libc/iconv/lib/endian.h newlib/libc/iconv/lib/iconv.c newlib/libc/iconv/lib/iconvnls.c newlib/libc/iconv/lib/iconvnls.h newlib/libc/iconv/lib/local.h newlib/libc/iconv/lib/nullconv.c newlib/libc/iconv/lib/ucsconv.c newlib/libc/iconv/lib/ucsconv.h newlib/libc/include/_ansi.h newlib/libc/include/_syslist.h newlib/libc/include/alloca.h newlib/libc/include/ar.h newlib/libc/include/argz.h newlib/libc/include/assert.h newlib/libc/include/ctype.h newlib/libc/include/dirent.h newlib/libc/include/envlock.h newlib/libc/include/envz.h newlib/libc/include/errno.h newlib/libc/include/fastmath.h newlib/libc/include/fcntl.h newlib/libc/include/fnmatch.h newlib/libc/include/getopt.h newlib/libc/include/glob.h newlib/libc/include/grp.h newlib/libc/include/iconv.h newlib/libc/include/ieeefp.h newlib/libc/include/inttypes.h newlib/libc/include/langinfo.h newlib/libc/include/libgen.h newlib/libc/include/limits.h newlib/libc/include/locale.h newlib/libc/include/machine/_default_types.h newlib/libc/include/machine/_types.h newlib/libc/include/machine/ansi.h newlib/libc/include/machine/endian.h newlib/libc/include/machine/fastmath.h newlib/libc/include/machine/ieeefp.h newlib/libc/include/machine/malloc.h newlib/libc/include/machine/param.h newlib/libc/include/machine/setjmp-dj.h newlib/libc/include/machine/setjmp.h newlib/libc/include/machine/stdlib.h newlib/libc/include/machine/termios.h newlib/libc/include/machine/time.h newlib/libc/include/machine/types.h newlib/libc/include/malloc.h newlib/libc/include/math.h newlib/libc/include/newlib.h newlib/libc/include/paths.h newlib/libc/include/process.h newlib/libc/include/pthread.h newlib/libc/include/pwd.h newlib/libc/include/reent.h newlib/libc/include/regdef.h newlib/libc/include/regex.h newlib/libc/include/sched.h newlib/libc/include/search.h newlib/libc/include/setjmp.h newlib/libc/include/signal.h newlib/libc/include/stdint.h newlib/libc/include/stdio.h newlib/libc/include/stdlib.h newlib/libc/include/string.h newlib/libc/include/sys/_default_fcntl.h newlib/libc/include/sys/_types.h newlib/libc/include/sys/cdefs.h newlib/libc/include/sys/config.h newlib/libc/include/sys/custom_file.h newlib/libc/include/sys/dirent.h newlib/libc/include/sys/errno.h newlib/libc/include/sys/fcntl.h newlib/libc/include/sys/features.h newlib/libc/include/sys/file.h newlib/libc/include/sys/iconvnls.h newlib/libc/include/sys/lock.h newlib/libc/include/sys/param.h newlib/libc/include/sys/queue.h newlib/libc/include/sys/reent.h newlib/libc/include/sys/resource.h newlib/libc/include/sys/sched.h newlib/libc/include/sys/signal.h newlib/libc/include/sys/stat.h newlib/libc/include/sys/stdio.h newlib/libc/include/sys/string.h newlib/libc/include/sys/syslimits.h newlib/libc/include/sys/time.h newlib/libc/include/sys/timeb.h newlib/libc/include/sys/times.h newlib/libc/include/sys/types.h newlib/libc/include/sys/unistd.h newlib/libc/include/sys/utime.h newlib/libc/include/sys/wait.h newlib/libc/include/tar.h newlib/libc/include/termios.h newlib/libc/include/time.h newlib/libc/include/unctrl.h newlib/libc/include/unistd.h newlib/libc/include/utime.h newlib/libc/include/utmp.h newlib/libc/include/wchar.h newlib/libc/include/wctype.h newlib/libc/include/wordexp.h newlib/libc/libc.texinfo newlib/libc/locale/Makefile.am newlib/libc/locale/Makefile.in newlib/libc/locale/fix_grouping.c newlib/libc/locale/ldpart.c newlib/libc/locale/ldpart.h newlib/libc/locale/lmessages.c newlib/libc/locale/lmessages.h newlib/libc/locale/lmonetary.c newlib/libc/locale/lmonetary.h newlib/libc/locale/lnumeric.c newlib/libc/locale/lnumeric.h newlib/libc/locale/locale.c newlib/libc/locale/locale.tex newlib/libc/locale/nl_langinfo.3 newlib/libc/locale/nl_langinfo.c newlib/libc/locale/setlocale.h newlib/libc/locale/timelocal.c newlib/libc/locale/timelocal.h newlib/libc/machine/Makefile.am newlib/libc/machine/Makefile.in newlib/libc/machine/a29k/Makefile.am newlib/libc/machine/a29k/Makefile.in newlib/libc/machine/a29k/aclocal.m4 newlib/libc/machine/a29k/configure newlib/libc/machine/a29k/configure.in newlib/libc/machine/aclocal.m4 newlib/libc/machine/arm/Makefile.am newlib/libc/machine/arm/Makefile.in newlib/libc/machine/arm/access.c newlib/libc/machine/arm/aclocal.m4 newlib/libc/machine/arm/arm_asm.h newlib/libc/machine/arm/configure newlib/libc/machine/arm/configure.in newlib/libc/machine/arm/machine/endian.h newlib/libc/machine/arm/machine/param.h newlib/libc/machine/arm/setjmp.S newlib/libc/machine/arm/strcmp.c newlib/libc/machine/arm/strcpy.c newlib/libc/machine/arm/strlen.c newlib/libc/machine/bfin/Makefile.am newlib/libc/machine/bfin/Makefile.in newlib/libc/machine/bfin/aclocal.m4 newlib/libc/machine/bfin/configure newlib/libc/machine/bfin/configure.in newlib/libc/machine/bfin/longjmp.S newlib/libc/machine/bfin/setjmp.S newlib/libc/machine/configure newlib/libc/machine/configure.in newlib/libc/machine/cris/Makefile.am newlib/libc/machine/cris/Makefile.in newlib/libc/machine/cris/aclocal.m4 newlib/libc/machine/cris/configure newlib/libc/machine/cris/configure.in newlib/libc/machine/cris/include/pthread.h newlib/libc/machine/cris/libcdtor.c newlib/libc/machine/cris/memcpy.c newlib/libc/machine/cris/memmove.c newlib/libc/machine/cris/memset.c newlib/libc/machine/cris/setjmp.c newlib/libc/machine/cris/sys/errno.h newlib/libc/machine/cris/sys/fcntl.h newlib/libc/machine/cris/sys/signal.h newlib/libc/machine/crx/Makefile.am newlib/libc/machine/crx/Makefile.in newlib/libc/machine/crx/aclocal.m4 newlib/libc/machine/crx/configure newlib/libc/machine/crx/configure.in newlib/libc/machine/crx/getenv.c newlib/libc/machine/crx/setjmp.S newlib/libc/machine/crx/sys/asm.h newlib/libc/machine/crx/sys/libh.h newlib/libc/machine/crx/sys/syscall.h newlib/libc/machine/d10v/Makefile.am newlib/libc/machine/d10v/Makefile.in newlib/libc/machine/d10v/aclocal.m4 newlib/libc/machine/d10v/configure newlib/libc/machine/d10v/configure.in newlib/libc/machine/d10v/setjmp.S newlib/libc/machine/d30v/Makefile.am newlib/libc/machine/d30v/Makefile.in newlib/libc/machine/d30v/aclocal.m4 newlib/libc/machine/d30v/configure newlib/libc/machine/d30v/configure.in newlib/libc/machine/d30v/setjmp.S newlib/libc/machine/fr30/Makefile.am newlib/libc/machine/fr30/Makefile.in newlib/libc/machine/fr30/aclocal.m4 newlib/libc/machine/fr30/configure newlib/libc/machine/fr30/configure.in newlib/libc/machine/fr30/setjmp.S newlib/libc/machine/frv/Makefile.am newlib/libc/machine/frv/Makefile.in newlib/libc/machine/frv/aclocal.m4 newlib/libc/machine/frv/configure newlib/libc/machine/frv/configure.in newlib/libc/machine/frv/setjmp.S newlib/libc/machine/h8300/Makefile.am newlib/libc/machine/h8300/Makefile.in newlib/libc/machine/h8300/aclocal.m4 newlib/libc/machine/h8300/configure newlib/libc/machine/h8300/configure.in newlib/libc/machine/h8300/defines.h newlib/libc/machine/h8300/h8sx_strcpy.S newlib/libc/machine/h8300/memcpy.S newlib/libc/machine/h8300/memset.S newlib/libc/machine/h8300/reg_memcpy.S newlib/libc/machine/h8300/reg_memset.S newlib/libc/machine/h8300/setarch.h newlib/libc/machine/h8300/setjmp.S newlib/libc/machine/h8300/strcmp.S newlib/libc/machine/h8500/Makefile.am newlib/libc/machine/h8500/Makefile.in newlib/libc/machine/h8500/aclocal.m4 newlib/libc/machine/h8500/cmpsi.c newlib/libc/machine/h8500/configure newlib/libc/machine/h8500/configure.in newlib/libc/machine/h8500/divhi3.S newlib/libc/machine/h8500/divsi3.c newlib/libc/machine/h8500/mulhi3.c newlib/libc/machine/h8500/mulsi3.c newlib/libc/machine/h8500/negsi2.c newlib/libc/machine/h8500/psi.S newlib/libc/machine/h8500/setjmp.S newlib/libc/machine/h8500/shifts.c newlib/libc/machine/hppa/DEFS.h newlib/libc/machine/hppa/Makefile.am newlib/libc/machine/hppa/Makefile.in newlib/libc/machine/hppa/aclocal.m4 newlib/libc/machine/hppa/configure newlib/libc/machine/hppa/configure.in newlib/libc/machine/hppa/memchr.S newlib/libc/machine/hppa/memcmp.S newlib/libc/machine/hppa/memcpy.S newlib/libc/machine/hppa/memset.S newlib/libc/machine/hppa/pcc_prefix.s newlib/libc/machine/hppa/setjmp.S newlib/libc/machine/hppa/strcat.S newlib/libc/machine/hppa/strcmp.S newlib/libc/machine/hppa/strcpy.S newlib/libc/machine/hppa/strlen.S newlib/libc/machine/hppa/strncat.S newlib/libc/machine/hppa/strncmp.S newlib/libc/machine/hppa/strncpy.S newlib/libc/machine/i386/Makefile.am newlib/libc/machine/i386/Makefile.in newlib/libc/machine/i386/aclocal.m4 newlib/libc/machine/i386/configure newlib/libc/machine/i386/configure.in newlib/libc/machine/i386/f_atan2.S newlib/libc/machine/i386/f_atan2f.S newlib/libc/machine/i386/f_exp.c newlib/libc/machine/i386/f_expf.c newlib/libc/machine/i386/f_frexp.S newlib/libc/machine/i386/f_frexpf.S newlib/libc/machine/i386/f_ldexp.S newlib/libc/machine/i386/f_ldexpf.S newlib/libc/machine/i386/f_log.S newlib/libc/machine/i386/f_log10.S newlib/libc/machine/i386/f_log10f.S newlib/libc/machine/i386/f_logf.S newlib/libc/machine/i386/f_math.h newlib/libc/machine/i386/f_pow.c newlib/libc/machine/i386/f_powf.c newlib/libc/machine/i386/f_tan.S newlib/libc/machine/i386/f_tanf.S newlib/libc/machine/i386/i386mach.h newlib/libc/machine/i386/machine/fastmath.h newlib/libc/machine/i386/memchr.S newlib/libc/machine/i386/memcmp.S newlib/libc/machine/i386/memcpy.S newlib/libc/machine/i386/memmove.S newlib/libc/machine/i386/memset.S newlib/libc/machine/i386/setjmp.S newlib/libc/machine/i386/strchr.S newlib/libc/machine/i386/strlen.S newlib/libc/machine/i960/Makefile.am newlib/libc/machine/i960/Makefile.in newlib/libc/machine/i960/aclocal.m4 newlib/libc/machine/i960/configure newlib/libc/machine/i960/configure.in newlib/libc/machine/i960/memccpy.S newlib/libc/machine/i960/memccpy_ca.S newlib/libc/machine/i960/memchr.S newlib/libc/machine/i960/memchr_ca.S newlib/libc/machine/i960/memcmp.S newlib/libc/machine/i960/memcmp_ca.S newlib/libc/machine/i960/memcpy.S newlib/libc/machine/i960/memcpy_ca.S newlib/libc/machine/i960/memset.S newlib/libc/machine/i960/setjmp.S newlib/libc/machine/i960/strchr.S newlib/libc/machine/i960/strchr_ca.S newlib/libc/machine/i960/strcmp.S newlib/libc/machine/i960/strcmp_ca.S newlib/libc/machine/i960/strcpy.S newlib/libc/machine/i960/strcpy_ca.S newlib/libc/machine/i960/strcspn.S newlib/libc/machine/i960/strdup.S newlib/libc/machine/i960/strlen.S newlib/libc/machine/i960/strlen_ca.S newlib/libc/machine/i960/strncat.S newlib/libc/machine/i960/strncat_ca.S newlib/libc/machine/i960/strncmp.S newlib/libc/machine/i960/strncmp_ca.S newlib/libc/machine/i960/strncpy.S newlib/libc/machine/i960/strncpy_ca.S newlib/libc/machine/i960/strpbrk.S newlib/libc/machine/i960/strrchr.S newlib/libc/machine/iq2000/Makefile.am newlib/libc/machine/iq2000/Makefile.in newlib/libc/machine/iq2000/aclocal.m4 newlib/libc/machine/iq2000/configure newlib/libc/machine/iq2000/configure.in newlib/libc/machine/iq2000/setjmp.S newlib/libc/machine/lm32/Makefile.am newlib/libc/machine/lm32/Makefile.in newlib/libc/machine/lm32/aclocal.m4 newlib/libc/machine/lm32/configure newlib/libc/machine/lm32/configure.in newlib/libc/machine/lm32/setjmp.S newlib/libc/machine/m32c/Makefile.am newlib/libc/machine/m32c/Makefile.in newlib/libc/machine/m32c/aclocal.m4 newlib/libc/machine/m32c/configure newlib/libc/machine/m32c/configure.in newlib/libc/machine/m32c/setjmp.S newlib/libc/machine/m32r/Makefile.am newlib/libc/machine/m32r/Makefile.in newlib/libc/machine/m32r/aclocal.m4 newlib/libc/machine/m32r/configure newlib/libc/machine/m32r/configure.in newlib/libc/machine/m32r/setjmp.S newlib/libc/machine/m68hc11/Makefile.am newlib/libc/machine/m68hc11/Makefile.in newlib/libc/machine/m68hc11/aclocal.m4 newlib/libc/machine/m68hc11/configure newlib/libc/machine/m68hc11/configure.in newlib/libc/machine/m68hc11/setjmp.S newlib/libc/machine/m68k/Makefile.am newlib/libc/machine/m68k/Makefile.in newlib/libc/machine/m68k/aclocal.m4 newlib/libc/machine/m68k/configure newlib/libc/machine/m68k/configure.in newlib/libc/machine/m68k/m68kasm.h newlib/libc/machine/m68k/memcpy.S newlib/libc/machine/m68k/memset.S newlib/libc/machine/m68k/setjmp.S newlib/libc/machine/m68k/strcpy.c newlib/libc/machine/m68k/strlen.c newlib/libc/machine/m88k/Makefile.am newlib/libc/machine/m88k/Makefile.in newlib/libc/machine/m88k/aclocal.m4 newlib/libc/machine/m88k/configure newlib/libc/machine/m88k/configure.in newlib/libc/machine/m88k/setjmp.S newlib/libc/machine/mep/Makefile.am newlib/libc/machine/mep/Makefile.in newlib/libc/machine/mep/aclocal.m4 newlib/libc/machine/mep/configure newlib/libc/machine/mep/configure.in newlib/libc/machine/mep/setjmp.S newlib/libc/machine/mips/Makefile.am newlib/libc/machine/mips/Makefile.in newlib/libc/machine/mips/aclocal.m4 newlib/libc/machine/mips/configure newlib/libc/machine/mips/configure.in newlib/libc/machine/mips/machine/regdef.h newlib/libc/machine/mips/memcpy.c newlib/libc/machine/mips/memset.c newlib/libc/machine/mips/setjmp.S newlib/libc/machine/mips/strcmp.c newlib/libc/machine/mips/strlen.c newlib/libc/machine/mips/strncpy.c newlib/libc/machine/mn10200/Makefile.am newlib/libc/machine/mn10200/Makefile.in newlib/libc/machine/mn10200/aclocal.m4 newlib/libc/machine/mn10200/configure newlib/libc/machine/mn10200/configure.in newlib/libc/machine/mn10200/setjmp.S newlib/libc/machine/mn10300/Makefile.am newlib/libc/machine/mn10300/Makefile.in newlib/libc/machine/mn10300/aclocal.m4 newlib/libc/machine/mn10300/configure newlib/libc/machine/mn10300/configure.in newlib/libc/machine/mn10300/memchr.S newlib/libc/machine/mn10300/memcmp.S newlib/libc/machine/mn10300/memcpy.S newlib/libc/machine/mn10300/memset.S newlib/libc/machine/mn10300/setjmp.S newlib/libc/machine/mn10300/strchr.S newlib/libc/machine/mn10300/strcmp.S newlib/libc/machine/mn10300/strcpy.S newlib/libc/machine/mn10300/strlen.S newlib/libc/machine/moxie/Makefile.am newlib/libc/machine/moxie/Makefile.in newlib/libc/machine/moxie/aclocal.m4 newlib/libc/machine/moxie/configure newlib/libc/machine/moxie/configure.in newlib/libc/machine/moxie/setjmp.S newlib/libc/machine/mt/Makefile.am newlib/libc/machine/mt/Makefile.in newlib/libc/machine/mt/aclocal.m4 newlib/libc/machine/mt/configure newlib/libc/machine/mt/configure.in newlib/libc/machine/mt/setjmp.S newlib/libc/machine/necv70/Makefile.am newlib/libc/machine/necv70/Makefile.in newlib/libc/machine/necv70/aclocal.m4 newlib/libc/machine/necv70/configure newlib/libc/machine/necv70/configure.in newlib/libc/machine/necv70/fastmath.S newlib/libc/machine/necv70/machine/registers.h newlib/libc/machine/necv70/necv70.tex newlib/libc/machine/necv70/setjmp.S newlib/libc/machine/powerpc/Makefile.am newlib/libc/machine/powerpc/Makefile.in newlib/libc/machine/powerpc/aclocal.m4 newlib/libc/machine/powerpc/atosfix16.c newlib/libc/machine/powerpc/atosfix32.c newlib/libc/machine/powerpc/atosfix64.c newlib/libc/machine/powerpc/atoufix16.c newlib/libc/machine/powerpc/atoufix32.c newlib/libc/machine/powerpc/atoufix64.c newlib/libc/machine/powerpc/configure newlib/libc/machine/powerpc/configure.in newlib/libc/machine/powerpc/fix64.h newlib/libc/machine/powerpc/machine/malloc.h newlib/libc/machine/powerpc/machine/stdlib.h newlib/libc/machine/powerpc/setjmp.S newlib/libc/machine/powerpc/simdldtoa.c newlib/libc/machine/powerpc/strtosfix16.c newlib/libc/machine/powerpc/strtosfix32.c newlib/libc/machine/powerpc/strtosfix64.c newlib/libc/machine/powerpc/strtoufix16.c newlib/libc/machine/powerpc/strtoufix32.c newlib/libc/machine/powerpc/strtoufix64.c newlib/libc/machine/powerpc/times.c newlib/libc/machine/powerpc/ufix64toa.c newlib/libc/machine/powerpc/vec_calloc.c newlib/libc/machine/powerpc/vec_free.c newlib/libc/machine/powerpc/vec_malloc.c newlib/libc/machine/powerpc/vec_mallocr.c newlib/libc/machine/powerpc/vec_realloc.c newlib/libc/machine/powerpc/vfprintf.c newlib/libc/machine/powerpc/vfscanf.c newlib/libc/machine/sh/Makefile.am newlib/libc/machine/sh/Makefile.in newlib/libc/machine/sh/aclocal.m4 newlib/libc/machine/sh/asm.h newlib/libc/machine/sh/configure newlib/libc/machine/sh/configure.in newlib/libc/machine/sh/memcpy.S newlib/libc/machine/sh/memset.S newlib/libc/machine/sh/setjmp.S newlib/libc/machine/sh/strcmp.S newlib/libc/machine/sh/strcpy.S newlib/libc/machine/sh/strlen.S newlib/libc/machine/sh/strncpy.S newlib/libc/machine/sparc/Makefile.am newlib/libc/machine/sparc/Makefile.in newlib/libc/machine/sparc/aclocal.m4 newlib/libc/machine/sparc/configure newlib/libc/machine/sparc/configure.in newlib/libc/machine/sparc/machine/sparclet.h newlib/libc/machine/sparc/scan.c newlib/libc/machine/sparc/setjmp.S newlib/libc/machine/sparc/shuffle.c newlib/libc/machine/spu/Makefile.am newlib/libc/machine/spu/Makefile.in newlib/libc/machine/spu/aclocal.m4 newlib/libc/machine/spu/assert.c newlib/libc/machine/spu/c99ppe.h newlib/libc/machine/spu/calloc_ea.c newlib/libc/machine/spu/clearerr.c newlib/libc/machine/spu/configure newlib/libc/machine/spu/configure.in newlib/libc/machine/spu/creat.c newlib/libc/machine/spu/ea_internal.h newlib/libc/machine/spu/fclose.c newlib/libc/machine/spu/fdopen.c newlib/libc/machine/spu/feof.c newlib/libc/machine/spu/ferror.c newlib/libc/machine/spu/fflush.c newlib/libc/machine/spu/fgetc.c newlib/libc/machine/spu/fgetpos.c newlib/libc/machine/spu/fgets.c newlib/libc/machine/spu/fileno.c newlib/libc/machine/spu/fiprintf.S newlib/libc/machine/spu/fiscanf.S newlib/libc/machine/spu/fopen.c newlib/libc/machine/spu/fprintf.S newlib/libc/machine/spu/fputc.c newlib/libc/machine/spu/fputs.c newlib/libc/machine/spu/fread.c newlib/libc/machine/spu/free_ea.c newlib/libc/machine/spu/freopen.c newlib/libc/machine/spu/fscanf.S newlib/libc/machine/spu/fseek.c newlib/libc/machine/spu/fsetpos.c newlib/libc/machine/spu/ftell.c newlib/libc/machine/spu/fwrite.c newlib/libc/machine/spu/getc.c newlib/libc/machine/spu/getchar.c newlib/libc/machine/spu/gets.c newlib/libc/machine/spu/impure.c newlib/libc/machine/spu/include/ea.h newlib/libc/machine/spu/include/fenv.h newlib/libc/machine/spu/include/spu_timer.h newlib/libc/machine/spu/iprintf.S newlib/libc/machine/spu/iscanf.S newlib/libc/machine/spu/machine/_types.h newlib/libc/machine/spu/malloc_ea.c newlib/libc/machine/spu/memchr_ea.c newlib/libc/machine/spu/memcmp.c newlib/libc/machine/spu/memcmp_ea.c newlib/libc/machine/spu/memcpy.c newlib/libc/machine/spu/memcpy_ea.c newlib/libc/machine/spu/memmove.c newlib/libc/machine/spu/memmove_ea.c newlib/libc/machine/spu/memset.c newlib/libc/machine/spu/memset_ea.c newlib/libc/machine/spu/mk_syscalls newlib/libc/machine/spu/mmap_ea.c newlib/libc/machine/spu/mremap_ea.c newlib/libc/machine/spu/msync_ea.c newlib/libc/machine/spu/munmap_ea.c newlib/libc/machine/spu/perror.c newlib/libc/machine/spu/posix_memalign_ea.c newlib/libc/machine/spu/pread_ea.c newlib/libc/machine/spu/printf.S newlib/libc/machine/spu/putc.c newlib/libc/machine/spu/putchar.c newlib/libc/machine/spu/puts.c newlib/libc/machine/spu/pwrite_ea.c newlib/libc/machine/spu/read_ea.c newlib/libc/machine/spu/readv_ea.c newlib/libc/machine/spu/realloc_ea.c newlib/libc/machine/spu/remove.c newlib/libc/machine/spu/rename.c newlib/libc/machine/spu/rewind.c newlib/libc/machine/spu/scanf.S newlib/libc/machine/spu/setbuf.c newlib/libc/machine/spu/setjmp.S newlib/libc/machine/spu/setvbuf.c newlib/libc/machine/spu/siprintf.S newlib/libc/machine/spu/siscanf.S newlib/libc/machine/spu/sleep.c newlib/libc/machine/spu/sniprintf.S newlib/libc/machine/spu/snprintf.S newlib/libc/machine/spu/sprintf.S newlib/libc/machine/spu/spu-gmon.c newlib/libc/machine/spu/spu-mcount.S newlib/libc/machine/spu/spu_clock_stop.c newlib/libc/machine/spu/spu_clock_svcs.c newlib/libc/machine/spu/spu_timebase.c newlib/libc/machine/spu/spu_timer_flih.S newlib/libc/machine/spu/spu_timer_free.c newlib/libc/machine/spu/spu_timer_internal.h newlib/libc/machine/spu/spu_timer_slih.c newlib/libc/machine/spu/spu_timer_slih_reg.c newlib/libc/machine/spu/spu_timer_stop.c newlib/libc/machine/spu/spu_timer_svcs.c newlib/libc/machine/spu/sscanf.S newlib/libc/machine/spu/stack_reg_va.S newlib/libc/machine/spu/stdio.c newlib/libc/machine/spu/straddr.h newlib/libc/machine/spu/strcat.c newlib/libc/machine/spu/strcat_ea.c newlib/libc/machine/spu/strchr.c newlib/libc/machine/spu/strchr_ea.c newlib/libc/machine/spu/strcmp.c newlib/libc/machine/spu/strcmp_ea.c newlib/libc/machine/spu/strcpy.c newlib/libc/machine/spu/strcpy.h newlib/libc/machine/spu/strcpy_ea.c newlib/libc/machine/spu/strcspn.c newlib/libc/machine/spu/strcspn_ea.c newlib/libc/machine/spu/strlen.c newlib/libc/machine/spu/strlen_ea.c newlib/libc/machine/spu/strncat.c newlib/libc/machine/spu/strncat_ea.c newlib/libc/machine/spu/strncmp.c newlib/libc/machine/spu/strncmp.h newlib/libc/machine/spu/strncmp_ea.c newlib/libc/machine/spu/strncpy.c newlib/libc/machine/spu/strncpy_ea.c newlib/libc/machine/spu/strpbrk.c newlib/libc/machine/spu/strpbrk_ea.c newlib/libc/machine/spu/strrchr.c newlib/libc/machine/spu/strrchr_ea.c newlib/libc/machine/spu/strspn.c newlib/libc/machine/spu/strspn_ea.c newlib/libc/machine/spu/strstr_ea.c newlib/libc/machine/spu/strxfrm.c newlib/libc/machine/spu/sys/custom_file.h newlib/libc/machine/spu/sys/dirent.h newlib/libc/machine/spu/sys/errno.h newlib/libc/machine/spu/sys/fenv.h newlib/libc/machine/spu/sys/linux_syscalls.h newlib/libc/machine/spu/sys/mman.h newlib/libc/machine/spu/sys/sched.h newlib/libc/machine/spu/sys/syscall.h newlib/libc/machine/spu/sys/uio.h newlib/libc/machine/spu/sys/utime.h newlib/libc/machine/spu/syscall.def newlib/libc/machine/spu/tmpfile.c newlib/libc/machine/spu/tmpnam.c newlib/libc/machine/spu/ungetc.c newlib/libc/machine/spu/usleep.c newlib/libc/machine/spu/vec_literal.h newlib/libc/machine/spu/vfiprintf.c newlib/libc/machine/spu/vfiscanf.c newlib/libc/machine/spu/vfprintf.c newlib/libc/machine/spu/vfscanf.c newlib/libc/machine/spu/viprintf.c newlib/libc/machine/spu/viscanf.c newlib/libc/machine/spu/vprintf.c newlib/libc/machine/spu/vscanf.c newlib/libc/machine/spu/vsiprintf.c newlib/libc/machine/spu/vsiscanf.c newlib/libc/machine/spu/vsniprintf.c newlib/libc/machine/spu/vsnprintf.c newlib/libc/machine/spu/vsprintf.c newlib/libc/machine/spu/vsscanf.c newlib/libc/machine/spu/write_ea.c newlib/libc/machine/spu/writev_ea.c newlib/libc/machine/tic4x/Makefile.am newlib/libc/machine/tic4x/Makefile.in newlib/libc/machine/tic4x/aclocal.m4 newlib/libc/machine/tic4x/configure newlib/libc/machine/tic4x/configure.in newlib/libc/machine/tic4x/setjmp.S newlib/libc/machine/tic80/Makefile.am newlib/libc/machine/tic80/Makefile.in newlib/libc/machine/tic80/aclocal.m4 newlib/libc/machine/tic80/configure newlib/libc/machine/tic80/configure.in newlib/libc/machine/tic80/setjmp.S newlib/libc/machine/v850/Makefile.am newlib/libc/machine/v850/Makefile.in newlib/libc/machine/v850/aclocal.m4 newlib/libc/machine/v850/configure newlib/libc/machine/v850/configure.in newlib/libc/machine/v850/setjmp.S newlib/libc/machine/w65/Makefile.am newlib/libc/machine/w65/Makefile.in newlib/libc/machine/w65/aclocal.m4 newlib/libc/machine/w65/cmpsi.c newlib/libc/machine/w65/configure newlib/libc/machine/w65/configure.in newlib/libc/machine/w65/divsi3.c newlib/libc/machine/w65/lshrhi.S newlib/libc/machine/w65/mulsi3.c newlib/libc/machine/w65/sdivhi3.S newlib/libc/machine/w65/smulhi3.S newlib/libc/machine/w65/udivhi3.S newlib/libc/machine/w65/umodhi3.S newlib/libc/machine/x86_64/Makefile.am newlib/libc/machine/x86_64/Makefile.in newlib/libc/machine/x86_64/aclocal.m4 newlib/libc/machine/x86_64/configure newlib/libc/machine/x86_64/configure.in newlib/libc/machine/x86_64/memcpy.S newlib/libc/machine/x86_64/memset.S newlib/libc/machine/x86_64/setjmp.S newlib/libc/machine/x86_64/x86_64mach.h newlib/libc/machine/xscale/Makefile.am newlib/libc/machine/xscale/Makefile.in newlib/libc/machine/xscale/aclocal.m4 newlib/libc/machine/xscale/configure newlib/libc/machine/xscale/configure.in newlib/libc/machine/xscale/machine/profile.h newlib/libc/machine/xscale/memchr.c newlib/libc/machine/xscale/memcmp.c newlib/libc/machine/xscale/memcpy.c newlib/libc/machine/xscale/memmove.c newlib/libc/machine/xscale/memset.c newlib/libc/machine/xscale/setjmp.S newlib/libc/machine/xscale/strchr.c newlib/libc/machine/xscale/strcmp.c newlib/libc/machine/xscale/strcpy.c newlib/libc/machine/xscale/strlen.c newlib/libc/machine/xscale/xscale.h newlib/libc/machine/xstormy16/Makefile.am newlib/libc/machine/xstormy16/Makefile.in newlib/libc/machine/xstormy16/aclocal.m4 newlib/libc/machine/xstormy16/configure newlib/libc/machine/xstormy16/configure.in newlib/libc/machine/xstormy16/mallocr.c newlib/libc/machine/xstormy16/setjmp.S newlib/libc/machine/xstormy16/tiny-malloc.c newlib/libc/machine/z8k/Makefile.am newlib/libc/machine/z8k/Makefile.in newlib/libc/machine/z8k/aclocal.m4 newlib/libc/machine/z8k/args.h newlib/libc/machine/z8k/configure newlib/libc/machine/z8k/configure.in newlib/libc/machine/z8k/memcmp.S newlib/libc/machine/z8k/memcpy.S newlib/libc/machine/z8k/memmove.S newlib/libc/machine/z8k/memset.S newlib/libc/machine/z8k/setjmp.S newlib/libc/misc/Makefile.am newlib/libc/misc/Makefile.in newlib/libc/misc/__dprintf.c newlib/libc/misc/ffs.c newlib/libc/misc/init.c newlib/libc/misc/misc.tex newlib/libc/misc/unctrl.c newlib/libc/posix/COPYRIGHT newlib/libc/posix/Makefile.am newlib/libc/posix/Makefile.in newlib/libc/posix/_isatty.c newlib/libc/posix/cclass.h newlib/libc/posix/closedir.c newlib/libc/posix/cname.h newlib/libc/posix/collate.c newlib/libc/posix/collate.h newlib/libc/posix/collcmp.c newlib/libc/posix/creat.c newlib/libc/posix/engine.c newlib/libc/posix/execl.c newlib/libc/posix/execle.c newlib/libc/posix/execlp.c newlib/libc/posix/execv.c newlib/libc/posix/execve.c newlib/libc/posix/execvp.c newlib/libc/posix/fnmatch.3 newlib/libc/posix/fnmatch.c newlib/libc/posix/glob.3 newlib/libc/posix/glob.c newlib/libc/posix/isatty.c newlib/libc/posix/namespace.h newlib/libc/posix/opendir.c newlib/libc/posix/popen.c newlib/libc/posix/readdir.c newlib/libc/posix/readdir_r.c newlib/libc/posix/regcomp.c newlib/libc/posix/regerror.c newlib/libc/posix/regex.3 newlib/libc/posix/regex2.h newlib/libc/posix/regexec.c newlib/libc/posix/regfree.c newlib/libc/posix/rewinddir.c newlib/libc/posix/rune.h newlib/libc/posix/runetype.h newlib/libc/posix/scandir.c newlib/libc/posix/seekdir.c newlib/libc/posix/sleep.c newlib/libc/posix/sysexits.h newlib/libc/posix/telldir.c newlib/libc/posix/un-namespace.h newlib/libc/posix/usleep.c newlib/libc/posix/utils.h newlib/libc/posix/wordexp.c newlib/libc/posix/wordfree.c newlib/libc/reent/Makefile.am newlib/libc/reent/Makefile.in newlib/libc/reent/closer.c newlib/libc/reent/execr.c newlib/libc/reent/fcntlr.c newlib/libc/reent/fstat64r.c newlib/libc/reent/fstatr.c newlib/libc/reent/getreent.c newlib/libc/reent/gettimeofdayr.c newlib/libc/reent/impure.c newlib/libc/reent/isattyr.c newlib/libc/reent/linkr.c newlib/libc/reent/lseek64r.c newlib/libc/reent/lseekr.c newlib/libc/reent/open64r.c newlib/libc/reent/openr.c newlib/libc/reent/readr.c newlib/libc/reent/reent.c newlib/libc/reent/reent.tex newlib/libc/reent/renamer.c newlib/libc/reent/sbrkr.c newlib/libc/reent/signalr.c newlib/libc/reent/signgam.c newlib/libc/reent/stat64r.c newlib/libc/reent/statr.c newlib/libc/reent/timesr.c newlib/libc/reent/unlinkr.c newlib/libc/reent/writer.c newlib/libc/saber newlib/libc/search/Makefile.am newlib/libc/search/Makefile.in newlib/libc/search/bsearch.c newlib/libc/search/db_local.h newlib/libc/search/extern.h newlib/libc/search/hash.c newlib/libc/search/hash.h newlib/libc/search/hash_bigkey.c newlib/libc/search/hash_buf.c newlib/libc/search/hash_func.c newlib/libc/search/hash_log2.c newlib/libc/search/hash_page.c newlib/libc/search/hcreate.3 newlib/libc/search/hcreate.c newlib/libc/search/hcreate_r.c newlib/libc/search/page.h newlib/libc/search/qsort.c newlib/libc/search/tdelete.c newlib/libc/search/tdestroy.c newlib/libc/search/tfind.c newlib/libc/search/tsearch.3 newlib/libc/search/tsearch.c newlib/libc/search/twalk.c newlib/libc/signal/Makefile.am newlib/libc/signal/Makefile.in newlib/libc/signal/raise.c newlib/libc/signal/signal.c newlib/libc/signal/signal.tex newlib/libc/stdio/Makefile.am newlib/libc/stdio/Makefile.in newlib/libc/stdio/asiprintf.c newlib/libc/stdio/asniprintf.c newlib/libc/stdio/asnprintf.c newlib/libc/stdio/asprintf.c newlib/libc/stdio/clearerr.c newlib/libc/stdio/diprintf.c newlib/libc/stdio/dprintf.c newlib/libc/stdio/fclose.c newlib/libc/stdio/fcloseall.c newlib/libc/stdio/fdopen.c newlib/libc/stdio/feof.c newlib/libc/stdio/ferror.c newlib/libc/stdio/fflush.c newlib/libc/stdio/fgetc.c newlib/libc/stdio/fgetpos.c newlib/libc/stdio/fgets.c newlib/libc/stdio/fgetwc.c newlib/libc/stdio/fgetws.c newlib/libc/stdio/fileno.c newlib/libc/stdio/findfp.c newlib/libc/stdio/fiprintf.c newlib/libc/stdio/fiscanf.c newlib/libc/stdio/flags.c newlib/libc/stdio/floatio.h newlib/libc/stdio/fmemopen.c newlib/libc/stdio/fopen.c newlib/libc/stdio/fopencookie.c newlib/libc/stdio/fprintf.c newlib/libc/stdio/fpurge.c newlib/libc/stdio/fputc.c newlib/libc/stdio/fputs.c newlib/libc/stdio/fputwc.c newlib/libc/stdio/fputws.c newlib/libc/stdio/fread.c newlib/libc/stdio/freopen.c newlib/libc/stdio/fscanf.c newlib/libc/stdio/fseek.c newlib/libc/stdio/fseeko.c newlib/libc/stdio/fsetpos.c newlib/libc/stdio/ftell.c newlib/libc/stdio/ftello.c newlib/libc/stdio/funopen.c newlib/libc/stdio/fvwrite.c newlib/libc/stdio/fvwrite.h newlib/libc/stdio/fwalk.c newlib/libc/stdio/fwide.c newlib/libc/stdio/fwprintf.c newlib/libc/stdio/fwrite.c newlib/libc/stdio/fwscanf.c newlib/libc/stdio/getc.c newlib/libc/stdio/getc_u.c newlib/libc/stdio/getchar.c newlib/libc/stdio/getchar_u.c newlib/libc/stdio/getdelim.c newlib/libc/stdio/getline.c newlib/libc/stdio/gets.c newlib/libc/stdio/getw.c newlib/libc/stdio/getwc.c newlib/libc/stdio/getwchar.c newlib/libc/stdio/iprintf.c newlib/libc/stdio/iscanf.c newlib/libc/stdio/local.h newlib/libc/stdio/makebuf.c newlib/libc/stdio/mktemp.c newlib/libc/stdio/open_memstream.c newlib/libc/stdio/perror.c newlib/libc/stdio/printf.c newlib/libc/stdio/putc.c newlib/libc/stdio/putc_u.c newlib/libc/stdio/putchar.c newlib/libc/stdio/putchar_u.c newlib/libc/stdio/puts.c newlib/libc/stdio/putw.c newlib/libc/stdio/putwc.c newlib/libc/stdio/putwchar.c newlib/libc/stdio/refill.c newlib/libc/stdio/remove.c newlib/libc/stdio/rename.c newlib/libc/stdio/rewind.c newlib/libc/stdio/rget.c newlib/libc/stdio/scanf.c newlib/libc/stdio/sccl.c newlib/libc/stdio/setbuf.c newlib/libc/stdio/setbuffer.c newlib/libc/stdio/setlinebuf.c newlib/libc/stdio/setvbuf.c newlib/libc/stdio/siprintf.c newlib/libc/stdio/siscanf.c newlib/libc/stdio/sniprintf.c newlib/libc/stdio/snprintf.c newlib/libc/stdio/sprintf.c newlib/libc/stdio/sscanf.c newlib/libc/stdio/stdio.c newlib/libc/stdio/stdio.tex newlib/libc/stdio/swprintf.c newlib/libc/stdio/swscanf.c newlib/libc/stdio/tmpfile.c newlib/libc/stdio/tmpnam.c newlib/libc/stdio/ungetc.c newlib/libc/stdio/ungetwc.c newlib/libc/stdio/vasiprintf.c newlib/libc/stdio/vasniprintf.c newlib/libc/stdio/vasnprintf.c newlib/libc/stdio/vasprintf.c newlib/libc/stdio/vdiprintf.c newlib/libc/stdio/vdprintf.c newlib/libc/stdio/vfieeefp.h newlib/libc/stdio/vfprintf.c newlib/libc/stdio/vfscanf.c newlib/libc/stdio/vfwprintf.c newlib/libc/stdio/vfwscanf.c newlib/libc/stdio/viprintf.c newlib/libc/stdio/viscanf.c newlib/libc/stdio/vprintf.c newlib/libc/stdio/vscanf.c newlib/libc/stdio/vsiprintf.c newlib/libc/stdio/vsiscanf.c newlib/libc/stdio/vsniprintf.c newlib/libc/stdio/vsnprintf.c newlib/libc/stdio/vsprintf.c newlib/libc/stdio/vsscanf.c newlib/libc/stdio/vswprintf.c newlib/libc/stdio/vswscanf.c newlib/libc/stdio/vwprintf.c newlib/libc/stdio/vwscanf.c newlib/libc/stdio/wbuf.c newlib/libc/stdio/wprintf.c newlib/libc/stdio/wscanf.c newlib/libc/stdio/wsetup.c newlib/libc/stdio64/Makefile.am newlib/libc/stdio64/Makefile.in newlib/libc/stdio64/dummy.c newlib/libc/stdio64/fdopen64.c newlib/libc/stdio64/fgetpos64.c newlib/libc/stdio64/fopen64.c newlib/libc/stdio64/freopen64.c newlib/libc/stdio64/fseeko64.c newlib/libc/stdio64/fsetpos64.c newlib/libc/stdio64/ftello64.c newlib/libc/stdio64/stdio64.c newlib/libc/stdio64/stdio64.tex newlib/libc/stdio64/tmpfile64.c newlib/libc/stdlib/Makefile.am newlib/libc/stdlib/Makefile.in newlib/libc/stdlib/_Exit.c newlib/libc/stdlib/__adjust.c newlib/libc/stdlib/__atexit.c newlib/libc/stdlib/__call_atexit.c newlib/libc/stdlib/__exp10.c newlib/libc/stdlib/__ten_mu.c newlib/libc/stdlib/a64l.c newlib/libc/stdlib/abort.c newlib/libc/stdlib/abs.c newlib/libc/stdlib/assert.c newlib/libc/stdlib/atexit.c newlib/libc/stdlib/atexit.h newlib/libc/stdlib/atof.c newlib/libc/stdlib/atoff.c newlib/libc/stdlib/atoi.c newlib/libc/stdlib/atol.c newlib/libc/stdlib/atoll.c newlib/libc/stdlib/btowc.c newlib/libc/stdlib/calloc.c newlib/libc/stdlib/cxa_atexit.c newlib/libc/stdlib/cxa_finalize.c newlib/libc/stdlib/div.c newlib/libc/stdlib/drand48.c newlib/libc/stdlib/dtoa.c newlib/libc/stdlib/dtoastub.c newlib/libc/stdlib/ecvtbuf.c newlib/libc/stdlib/efgcvt.c newlib/libc/stdlib/environ.c newlib/libc/stdlib/envlock.c newlib/libc/stdlib/eprintf.c newlib/libc/stdlib/erand48.c newlib/libc/stdlib/exit.c newlib/libc/stdlib/gd_qnan.h newlib/libc/stdlib/gdtoa-gethex.c newlib/libc/stdlib/gdtoa-hexnan.c newlib/libc/stdlib/gdtoa.h newlib/libc/stdlib/getenv.c newlib/libc/stdlib/getenv_r.c newlib/libc/stdlib/getopt.c newlib/libc/stdlib/getsubopt.3 newlib/libc/stdlib/getsubopt.c newlib/libc/stdlib/jrand48.c newlib/libc/stdlib/l64a.c newlib/libc/stdlib/labs.c newlib/libc/stdlib/lcong48.c newlib/libc/stdlib/ldiv.c newlib/libc/stdlib/ldtoa.c newlib/libc/stdlib/llabs.c newlib/libc/stdlib/lldiv.c newlib/libc/stdlib/local.h newlib/libc/stdlib/lrand48.c newlib/libc/stdlib/malign.c newlib/libc/stdlib/malloc.c newlib/libc/stdlib/mallocr.c newlib/libc/stdlib/mbctype.h newlib/libc/stdlib/mblen.c newlib/libc/stdlib/mblen_r.c newlib/libc/stdlib/mbrlen.c newlib/libc/stdlib/mbrtowc.c newlib/libc/stdlib/mbsinit.c newlib/libc/stdlib/mbsnrtowcs.c newlib/libc/stdlib/mbsrtowcs.c newlib/libc/stdlib/mbstowcs.c newlib/libc/stdlib/mbstowcs_r.c newlib/libc/stdlib/mbtowc.c newlib/libc/stdlib/mbtowc_r.c newlib/libc/stdlib/mlock.c newlib/libc/stdlib/mprec.c newlib/libc/stdlib/mprec.h newlib/libc/stdlib/mrand48.c newlib/libc/stdlib/msize.c newlib/libc/stdlib/mstats.c newlib/libc/stdlib/mtrim.c newlib/libc/stdlib/nrand48.c newlib/libc/stdlib/on_exit.c newlib/libc/stdlib/putenv.c newlib/libc/stdlib/putenv_r.c newlib/libc/stdlib/rand.c newlib/libc/stdlib/rand48.c newlib/libc/stdlib/rand48.h newlib/libc/stdlib/rand_r.c newlib/libc/stdlib/realloc.c newlib/libc/stdlib/reallocf.c newlib/libc/stdlib/sb_charsets.c newlib/libc/stdlib/seed48.c newlib/libc/stdlib/setenv.c newlib/libc/stdlib/setenv_r.c newlib/libc/stdlib/srand48.c newlib/libc/stdlib/std.h newlib/libc/stdlib/stdlib.tex newlib/libc/stdlib/strtod.c newlib/libc/stdlib/strtol.c newlib/libc/stdlib/strtold.c newlib/libc/stdlib/strtoll.c newlib/libc/stdlib/strtoll_r.c newlib/libc/stdlib/strtoul.c newlib/libc/stdlib/strtoull.c newlib/libc/stdlib/strtoull_r.c newlib/libc/stdlib/system.c newlib/libc/stdlib/valloc.c newlib/libc/stdlib/wcrtomb.c newlib/libc/stdlib/wcsnrtombs.c newlib/libc/stdlib/wcsrtombs.c newlib/libc/stdlib/wcstod.c newlib/libc/stdlib/wcstol.c newlib/libc/stdlib/wcstold.c newlib/libc/stdlib/wcstoll.c newlib/libc/stdlib/wcstoll_r.c newlib/libc/stdlib/wcstombs.c newlib/libc/stdlib/wcstombs_r.c newlib/libc/stdlib/wcstoul.c newlib/libc/stdlib/wcstoull.c newlib/libc/stdlib/wcstoull_r.c newlib/libc/stdlib/wctob.c newlib/libc/stdlib/wctomb.c newlib/libc/stdlib/wctomb_r.c newlib/libc/string/Makefile.am newlib/libc/string/Makefile.in newlib/libc/string/bcmp.c newlib/libc/string/bcopy.c newlib/libc/string/bzero.c newlib/libc/string/index.c newlib/libc/string/local.h newlib/libc/string/memccpy.c newlib/libc/string/memchr.c newlib/libc/string/memcmp.c newlib/libc/string/memcpy.c newlib/libc/string/memmem.c newlib/libc/string/memmove.c newlib/libc/string/mempcpy.c newlib/libc/string/memset.c newlib/libc/string/rindex.c newlib/libc/string/stpcpy.c newlib/libc/string/stpncpy.c newlib/libc/string/str-two-way.h newlib/libc/string/strcasecmp.c newlib/libc/string/strcasestr.c newlib/libc/string/strcat.c newlib/libc/string/strchr.c newlib/libc/string/strcmp.c newlib/libc/string/strcoll.c newlib/libc/string/strcpy.c newlib/libc/string/strcspn.c newlib/libc/string/strdup.c newlib/libc/string/strdup_r.c newlib/libc/string/strerror.c newlib/libc/string/strerror_r.c newlib/libc/string/strings.tex newlib/libc/string/strlcat.c newlib/libc/string/strlcpy.c newlib/libc/string/strlen.c newlib/libc/string/strlwr.c newlib/libc/string/strncasecmp.c newlib/libc/string/strncat.c newlib/libc/string/strncmp.c newlib/libc/string/strncpy.c newlib/libc/string/strndup.c newlib/libc/string/strndup_r.c newlib/libc/string/strnlen.c newlib/libc/string/strpbrk.c newlib/libc/string/strrchr.c newlib/libc/string/strsep.c newlib/libc/string/strspn.c newlib/libc/string/strstr.c newlib/libc/string/strtok.c newlib/libc/string/strtok_r.c newlib/libc/string/strupr.c newlib/libc/string/strxfrm.c newlib/libc/string/swab.c newlib/libc/string/u_strerr.c newlib/libc/string/wcpcpy.c newlib/libc/string/wcpncpy.c newlib/libc/string/wcscasecmp.c newlib/libc/string/wcscat.c newlib/libc/string/wcschr.c newlib/libc/string/wcscmp.c newlib/libc/string/wcscoll.c newlib/libc/string/wcscpy.c newlib/libc/string/wcscspn.c newlib/libc/string/wcsdup.c newlib/libc/string/wcslcat.c newlib/libc/string/wcslcpy.c newlib/libc/string/wcslen.c newlib/libc/string/wcsncasecmp.c newlib/libc/string/wcsncat.c newlib/libc/string/wcsncmp.c newlib/libc/string/wcsncpy.c newlib/libc/string/wcsnlen.c newlib/libc/string/wcspbrk.c newlib/libc/string/wcsrchr.c newlib/libc/string/wcsspn.c newlib/libc/string/wcsstr.c newlib/libc/string/wcstok.c newlib/libc/string/wcstrings.tex newlib/libc/string/wcswidth.c newlib/libc/string/wcsxfrm.c newlib/libc/string/wcwidth.c newlib/libc/string/wmemchr.c newlib/libc/string/wmemcmp.c newlib/libc/string/wmemcpy.c newlib/libc/string/wmemmove.c newlib/libc/string/wmemset.c newlib/libc/sys.tex newlib/libc/sys/Makefile.am newlib/libc/sys/Makefile.in newlib/libc/sys/a29khif/Makefile.am newlib/libc/sys/a29khif/Makefile.in newlib/libc/sys/a29khif/_alloc.S newlib/libc/sys/a29khif/_close.S newlib/libc/sys/a29khif/_cycles.S newlib/libc/sys/a29khif/_exit.S newlib/libc/sys/a29khif/_fstat.S newlib/libc/sys/a29khif/_getpsiz.S newlib/libc/sys/a29khif/_gettz.S newlib/libc/sys/a29khif/_ioctl.S newlib/libc/sys/a29khif/_iostat.S newlib/libc/sys/a29khif/_iowait.S newlib/libc/sys/a29khif/_isatty.S newlib/libc/sys/a29khif/_lseek.S newlib/libc/sys/a29khif/_open.S newlib/libc/sys/a29khif/_query.S newlib/libc/sys/a29khif/_read.S newlib/libc/sys/a29khif/_sbrk.S newlib/libc/sys/a29khif/_setim.S newlib/libc/sys/a29khif/_settrap.S newlib/libc/sys/a29khif/_setvec.S newlib/libc/sys/a29khif/_tmpnam.S newlib/libc/sys/a29khif/_write.S newlib/libc/sys/a29khif/aclocal.m4 newlib/libc/sys/a29khif/alloc.S newlib/libc/sys/a29khif/clock.S newlib/libc/sys/a29khif/configure newlib/libc/sys/a29khif/configure.in newlib/libc/sys/a29khif/crt0.S newlib/libc/sys/a29khif/getargs.S newlib/libc/sys/a29khif/getenv.S newlib/libc/sys/a29khif/getpid.c newlib/libc/sys/a29khif/kill.c newlib/libc/sys/a29khif/read.S newlib/libc/sys/a29khif/remove.S newlib/libc/sys/a29khif/rename.S newlib/libc/sys/a29khif/signal.S newlib/libc/sys/a29khif/stubs.S newlib/libc/sys/a29khif/sys/cpudef.h newlib/libc/sys/a29khif/sys/fpsymbol.h newlib/libc/sys/a29khif/sys/intrinsi.h newlib/libc/sys/a29khif/sys/macros.h newlib/libc/sys/a29khif/sys/proreg.h newlib/libc/sys/a29khif/sys/romdcl.h newlib/libc/sys/a29khif/sys/smartmac.h newlib/libc/sys/a29khif/sys/sysmac.h newlib/libc/sys/a29khif/systime.S newlib/libc/sys/a29khif/vec.S newlib/libc/sys/aclocal.m4 newlib/libc/sys/arc/Makefile.am newlib/libc/sys/arc/Makefile.in newlib/libc/sys/arc/aclocal.m4 newlib/libc/sys/arc/configure newlib/libc/sys/arc/configure.in newlib/libc/sys/arc/crt0.S newlib/libc/sys/arc/dummy.S newlib/libc/sys/arc/isatty.c newlib/libc/sys/arc/mem-layout.c newlib/libc/sys/arc/sbrk.c newlib/libc/sys/arc/sys/syscall.h newlib/libc/sys/arc/syscalls.c newlib/libc/sys/arm/Makefile.am newlib/libc/sys/arm/Makefile.in newlib/libc/sys/arm/aclocal.m4 newlib/libc/sys/arm/aeabi_atexit.c newlib/libc/sys/arm/configure newlib/libc/sys/arm/configure.in newlib/libc/sys/arm/crt0.S newlib/libc/sys/arm/libcfunc.c newlib/libc/sys/arm/swi.h newlib/libc/sys/arm/sys/fcntl.h newlib/libc/sys/arm/sys/param.h newlib/libc/sys/arm/syscalls.c newlib/libc/sys/arm/trap.S newlib/libc/sys/configure newlib/libc/sys/configure.in newlib/libc/sys/d10v/Makefile.am newlib/libc/sys/d10v/Makefile.in newlib/libc/sys/d10v/aclocal.m4 newlib/libc/sys/d10v/configure newlib/libc/sys/d10v/configure.in newlib/libc/sys/d10v/creat.c newlib/libc/sys/d10v/crt0.S newlib/libc/sys/d10v/sys/syscall.h newlib/libc/sys/d10v/syscalls.c newlib/libc/sys/d10v/trap.S newlib/libc/sys/decstation/Makefile.am newlib/libc/sys/decstation/Makefile.in newlib/libc/sys/decstation/_main.c newlib/libc/sys/decstation/aclocal.m4 newlib/libc/sys/decstation/configure newlib/libc/sys/decstation/configure.in newlib/libc/sys/decstation/sys/dirent.h newlib/libc/sys/h8300hms/Makefile.am newlib/libc/sys/h8300hms/Makefile.in newlib/libc/sys/h8300hms/_exit.S newlib/libc/sys/h8300hms/aclocal.m4 newlib/libc/sys/h8300hms/close.S newlib/libc/sys/h8300hms/configure newlib/libc/sys/h8300hms/configure.in newlib/libc/sys/h8300hms/crt0.S newlib/libc/sys/h8300hms/crt1.c newlib/libc/sys/h8300hms/fstat.S newlib/libc/sys/h8300hms/lseek.S newlib/libc/sys/h8300hms/misc.c newlib/libc/sys/h8300hms/open.S newlib/libc/sys/h8300hms/read.S newlib/libc/sys/h8300hms/sbrk.c newlib/libc/sys/h8300hms/setarch.h newlib/libc/sys/h8300hms/stat.S newlib/libc/sys/h8300hms/sys/file.h newlib/libc/sys/h8300hms/sys/syscall.h newlib/libc/sys/h8300hms/syscalls.c newlib/libc/sys/h8300hms/write.S newlib/libc/sys/h8500hms/Makefile.am newlib/libc/sys/h8500hms/Makefile.in newlib/libc/sys/h8500hms/aclocal.m4 newlib/libc/sys/h8500hms/configure newlib/libc/sys/h8500hms/configure.in newlib/libc/sys/h8500hms/crt0.c newlib/libc/sys/h8500hms/misc.c newlib/libc/sys/h8500hms/syscalls.c newlib/libc/sys/linux/Makefile.am newlib/libc/sys/linux/Makefile.in newlib/libc/sys/linux/aclocal.m4 newlib/libc/sys/linux/aio.c newlib/libc/sys/linux/aio64.c newlib/libc/sys/linux/argp/Makefile.am newlib/libc/sys/linux/argp/Makefile.in newlib/libc/sys/linux/argp/argp-ba.c newlib/libc/sys/linux/argp/argp-eexst.c newlib/libc/sys/linux/argp/argp-fmtstream.c newlib/libc/sys/linux/argp/argp-fmtstream.h newlib/libc/sys/linux/argp/argp-fs-xinl.c newlib/libc/sys/linux/argp/argp-help.c newlib/libc/sys/linux/argp/argp-namefrob.h newlib/libc/sys/linux/argp/argp-parse.c newlib/libc/sys/linux/argp/argp-pv.c newlib/libc/sys/linux/argp/argp-pvh.c newlib/libc/sys/linux/argp/argp-xinl.c newlib/libc/sys/linux/bits/dirent.h newlib/libc/sys/linux/bits/initspin.h newlib/libc/sys/linux/bits/libc-lock.h newlib/libc/sys/linux/bits/pthreadtypes.h newlib/libc/sys/linux/bits/typesizes.h newlib/libc/sys/linux/bp-checks.h newlib/libc/sys/linux/brk.c newlib/libc/sys/linux/calloc.c newlib/libc/sys/linux/callocr.c newlib/libc/sys/linux/cfreer.c newlib/libc/sys/linux/cfspeed.c newlib/libc/sys/linux/clock_getres.c newlib/libc/sys/linux/clock_gettime.c newlib/libc/sys/linux/clock_settime.c newlib/libc/sys/linux/cmath/Makefile.am newlib/libc/sys/linux/cmath/Makefile.in newlib/libc/sys/linux/cmath/math_private.h newlib/libc/sys/linux/cmath/s_cacos.c newlib/libc/sys/linux/cmath/s_cacosf.c newlib/libc/sys/linux/cmath/s_cacosh.c newlib/libc/sys/linux/cmath/s_cacoshf.c newlib/libc/sys/linux/cmath/s_cacoshl.c newlib/libc/sys/linux/cmath/s_cacosl.c newlib/libc/sys/linux/cmath/s_casin.c newlib/libc/sys/linux/cmath/s_casinf.c newlib/libc/sys/linux/cmath/s_casinh.c newlib/libc/sys/linux/cmath/s_casinhf.c newlib/libc/sys/linux/cmath/s_casinhl.c newlib/libc/sys/linux/cmath/s_casinl.c newlib/libc/sys/linux/cmath/s_catan.c newlib/libc/sys/linux/cmath/s_catanf.c newlib/libc/sys/linux/cmath/s_catanh.c newlib/libc/sys/linux/cmath/s_catanhf.c newlib/libc/sys/linux/cmath/s_catanhl.c newlib/libc/sys/linux/cmath/s_catanl.c newlib/libc/sys/linux/cmath/s_cbrtl.c newlib/libc/sys/linux/cmath/s_ccos.c newlib/libc/sys/linux/cmath/s_ccosf.c newlib/libc/sys/linux/cmath/s_ccosh.c newlib/libc/sys/linux/cmath/s_ccoshf.c newlib/libc/sys/linux/cmath/s_ccoshl.c newlib/libc/sys/linux/cmath/s_ccosl.c newlib/libc/sys/linux/cmath/s_cexp.c newlib/libc/sys/linux/cmath/s_cexpf.c newlib/libc/sys/linux/cmath/s_cexpl.c newlib/libc/sys/linux/cmath/s_clog.c newlib/libc/sys/linux/cmath/s_clog10.c newlib/libc/sys/linux/cmath/s_clog10f.c newlib/libc/sys/linux/cmath/s_clog10l.c newlib/libc/sys/linux/cmath/s_clogf.c newlib/libc/sys/linux/cmath/s_clogl.c newlib/libc/sys/linux/cmath/s_cpow.c newlib/libc/sys/linux/cmath/s_cpowf.c newlib/libc/sys/linux/cmath/s_cpowl.c newlib/libc/sys/linux/cmath/s_cproj.c newlib/libc/sys/linux/cmath/s_cprojf.c newlib/libc/sys/linux/cmath/s_cprojl.c newlib/libc/sys/linux/cmath/s_csin.c newlib/libc/sys/linux/cmath/s_csinf.c newlib/libc/sys/linux/cmath/s_csinh.c newlib/libc/sys/linux/cmath/s_csinhf.c newlib/libc/sys/linux/cmath/s_csinhl.c newlib/libc/sys/linux/cmath/s_csinl.c newlib/libc/sys/linux/cmath/s_csqrt.c newlib/libc/sys/linux/cmath/s_csqrtf.c newlib/libc/sys/linux/cmath/s_csqrtl.c newlib/libc/sys/linux/cmath/s_ctan.c newlib/libc/sys/linux/cmath/s_ctanf.c newlib/libc/sys/linux/cmath/s_ctanh.c newlib/libc/sys/linux/cmath/s_ctanhf.c newlib/libc/sys/linux/cmath/s_ctanhl.c newlib/libc/sys/linux/cmath/s_ctanl.c newlib/libc/sys/linux/config.h newlib/libc/sys/linux/configure newlib/libc/sys/linux/configure.in newlib/libc/sys/linux/confstr.c newlib/libc/sys/linux/confstr.h newlib/libc/sys/linux/crt1.c newlib/libc/sys/linux/ctermid.c newlib/libc/sys/linux/dl/Makefile.am newlib/libc/sys/linux/dl/Makefile.in newlib/libc/sys/linux/dl/abi-tag.h newlib/libc/sys/linux/dl/atomicity.h newlib/libc/sys/linux/dl/dl-addr.c newlib/libc/sys/linux/dl/dl-cache.c newlib/libc/sys/linux/dl/dl-cache.h newlib/libc/sys/linux/dl/dl-close.c newlib/libc/sys/linux/dl/dl-debug.c newlib/libc/sys/linux/dl/dl-deps.c newlib/libc/sys/linux/dl/dl-dst.h newlib/libc/sys/linux/dl/dl-error.c newlib/libc/sys/linux/dl/dl-fini.c newlib/libc/sys/linux/dl/dl-init.c newlib/libc/sys/linux/dl/dl-iteratephdr.c newlib/libc/sys/linux/dl/dl-libc.c newlib/libc/sys/linux/dl/dl-librecon.h newlib/libc/sys/linux/dl/dl-load.c newlib/libc/sys/linux/dl/dl-local.h newlib/libc/sys/linux/dl/dl-lookup.c newlib/libc/sys/linux/dl/dl-lookupcfg.h newlib/libc/sys/linux/dl/dl-minimal.c newlib/libc/sys/linux/dl/dl-misc.c newlib/libc/sys/linux/dl/dl-object.c newlib/libc/sys/linux/dl/dl-open.c newlib/libc/sys/linux/dl/dl-osinfo.h newlib/libc/sys/linux/dl/dl-profile.c newlib/libc/sys/linux/dl/dl-profstub.c newlib/libc/sys/linux/dl/dl-reloc.c newlib/libc/sys/linux/dl/dl-runtime.c newlib/libc/sys/linux/dl/dl-support.c newlib/libc/sys/linux/dl/dl-sym.c newlib/libc/sys/linux/dl/dl-version.c newlib/libc/sys/linux/dl/do-lookup.h newlib/libc/sys/linux/dl/do-rel.h newlib/libc/sys/linux/dl/dynamic-link.h newlib/libc/sys/linux/dl/kernel-features.h newlib/libc/sys/linux/dl/ldsodefs.h newlib/libc/sys/linux/dl/libintl.h newlib/libc/sys/linux/dl/trusted-dirs.h newlib/libc/sys/linux/dl/unsecvars.h newlib/libc/sys/linux/fclean.c newlib/libc/sys/linux/flockfile.c newlib/libc/sys/linux/fpathconf.c newlib/libc/sys/linux/free.c newlib/libc/sys/linux/freer.c newlib/libc/sys/linux/fstab.c newlib/libc/sys/linux/fstatvfs.c newlib/libc/sys/linux/fstatvfs64.c newlib/libc/sys/linux/ftok.c newlib/libc/sys/linux/ftw.c newlib/libc/sys/linux/ftw64.c newlib/libc/sys/linux/funlockfile.c newlib/libc/sys/linux/getdate.c newlib/libc/sys/linux/getdate_err.c newlib/libc/sys/linux/gethostid.c newlib/libc/sys/linux/gethostname.c newlib/libc/sys/linux/getlogin.c newlib/libc/sys/linux/getopt.c newlib/libc/sys/linux/getopt1.c newlib/libc/sys/linux/getpwent.c newlib/libc/sys/linux/getreent.c newlib/libc/sys/linux/getrlimit64.c newlib/libc/sys/linux/getwd.c newlib/libc/sys/linux/hp-timing.h newlib/libc/sys/linux/iconv/Makefile.am newlib/libc/sys/linux/iconv/Makefile.in newlib/libc/sys/linux/iconv/categories.def newlib/libc/sys/linux/iconv/dummy-repertoire.c newlib/libc/sys/linux/iconv/gconv.c newlib/libc/sys/linux/iconv/gconv_builtin.c newlib/libc/sys/linux/iconv/gconv_builtin.h newlib/libc/sys/linux/iconv/gconv_cache.c newlib/libc/sys/linux/iconv/gconv_charset.h newlib/libc/sys/linux/iconv/gconv_close.c newlib/libc/sys/linux/iconv/gconv_conf.c newlib/libc/sys/linux/iconv/gconv_db.c newlib/libc/sys/linux/iconv/gconv_dl.c newlib/libc/sys/linux/iconv/gconv_int.h newlib/libc/sys/linux/iconv/gconv_open.c newlib/libc/sys/linux/iconv/gconv_simple.c newlib/libc/sys/linux/iconv/gconv_trans.c newlib/libc/sys/linux/iconv/hash-string.h newlib/libc/sys/linux/iconv/iconv.c newlib/libc/sys/linux/iconv/iconv.h newlib/libc/sys/linux/iconv/iconv_charmap.c newlib/libc/sys/linux/iconv/iconv_close.c newlib/libc/sys/linux/iconv/iconv_open.c newlib/libc/sys/linux/iconv/iconvconfig.h newlib/libc/sys/linux/iconv/loadinfo.h newlib/libc/sys/linux/iconv/localeinfo.h newlib/libc/sys/linux/iconv/loop.c newlib/libc/sys/linux/iconv/skeleton.c newlib/libc/sys/linux/ids.c newlib/libc/sys/linux/include/argp.h newlib/libc/sys/linux/include/arpa/ftp.h newlib/libc/sys/linux/include/arpa/inet.h newlib/libc/sys/linux/include/arpa/nameser.h newlib/libc/sys/linux/include/arpa/nameser_compat.h newlib/libc/sys/linux/include/arpa/telnet.h newlib/libc/sys/linux/include/arpa/tftp.h newlib/libc/sys/linux/include/bp-sym.h newlib/libc/sys/linux/include/cmathcalls.h newlib/libc/sys/linux/include/complex.h newlib/libc/sys/linux/include/dl-hash.h newlib/libc/sys/linux/include/dlfcn.h newlib/libc/sys/linux/include/fnmatch.h newlib/libc/sys/linux/include/gconv.h newlib/libc/sys/linux/include/getopt.h newlib/libc/sys/linux/include/glob.h newlib/libc/sys/linux/include/hesiod.h newlib/libc/sys/linux/include/iconv.h newlib/libc/sys/linux/include/ifaddrs.h newlib/libc/sys/linux/include/limits.h newlib/libc/sys/linux/include/link.h newlib/libc/sys/linux/include/ltdl.h newlib/libc/sys/linux/include/malloc.h newlib/libc/sys/linux/include/mcheck.h newlib/libc/sys/linux/include/mqueue.h newlib/libc/sys/linux/include/namespace.h newlib/libc/sys/linux/include/net/bpf.h newlib/libc/sys/linux/include/net/bpf_compat.h newlib/libc/sys/linux/include/net/bpfdesc.h newlib/libc/sys/linux/include/net/bridge.h newlib/libc/sys/linux/include/net/ethernet.h newlib/libc/sys/linux/include/net/fddi.h newlib/libc/sys/linux/include/net/if.h newlib/libc/sys/linux/include/net/if_arc.h newlib/libc/sys/linux/include/net/if_arp.h newlib/libc/sys/linux/include/net/if_dl.h newlib/libc/sys/linux/include/net/if_gif.h newlib/libc/sys/linux/include/net/if_ieee80211.h newlib/libc/sys/linux/include/net/if_llc.h newlib/libc/sys/linux/include/net/if_mib.h newlib/libc/sys/linux/include/net/if_ppp.h newlib/libc/sys/linux/include/net/if_slvar.h newlib/libc/sys/linux/include/net/if_sppp.h newlib/libc/sys/linux/include/net/if_stf.h newlib/libc/sys/linux/include/net/if_tap.h newlib/libc/sys/linux/include/net/if_tapvar.h newlib/libc/sys/linux/include/net/if_tun.h newlib/libc/sys/linux/include/net/if_tunvar.h newlib/libc/sys/linux/include/net/if_types.h newlib/libc/sys/linux/include/net/if_var.h newlib/libc/sys/linux/include/net/if_vlan_var.h newlib/libc/sys/linux/include/net/intrq.h newlib/libc/sys/linux/include/net/iso88025.h newlib/libc/sys/linux/include/net/net_osdep.h newlib/libc/sys/linux/include/net/netisr.h newlib/libc/sys/linux/include/net/pfil.h newlib/libc/sys/linux/include/net/pfkeyv2.h newlib/libc/sys/linux/include/net/ppp_comp.h newlib/libc/sys/linux/include/net/ppp_defs.h newlib/libc/sys/linux/include/net/radix.h newlib/libc/sys/linux/include/net/raw_cb.h newlib/libc/sys/linux/include/net/route.h newlib/libc/sys/linux/include/net/slcompress.h newlib/libc/sys/linux/include/net/slip.h newlib/libc/sys/linux/include/net/zlib.h newlib/libc/sys/linux/include/netconfig.h newlib/libc/sys/linux/include/netdb.h newlib/libc/sys/linux/include/netinet/icmp6.h newlib/libc/sys/linux/include/netinet/icmp_var.h newlib/libc/sys/linux/include/netinet/if_ether.h newlib/libc/sys/linux/include/netinet/igmp.h newlib/libc/sys/linux/include/netinet/igmp_var.h newlib/libc/sys/linux/include/netinet/in.h newlib/libc/sys/linux/include/netinet/in_gif.h newlib/libc/sys/linux/include/netinet/in_pcb.h newlib/libc/sys/linux/include/netinet/in_systm.h newlib/libc/sys/linux/include/netinet/in_var.h newlib/libc/sys/linux/include/netinet/ip.h newlib/libc/sys/linux/include/netinet/ip6.h newlib/libc/sys/linux/include/netinet/ip_dummynet.h newlib/libc/sys/linux/include/netinet/ip_ecn.h newlib/libc/sys/linux/include/netinet/ip_encap.h newlib/libc/sys/linux/include/netinet/ip_fw.h newlib/libc/sys/linux/include/netinet/ip_icmp.h newlib/libc/sys/linux/include/netinet/ip_mroute.h newlib/libc/sys/linux/include/netinet/ip_var.h newlib/libc/sys/linux/include/netinet/ipprotosw.h newlib/libc/sys/linux/include/netinet/tcp.h newlib/libc/sys/linux/include/netinet/tcp_debug.h newlib/libc/sys/linux/include/netinet/tcp_fsm.h newlib/libc/sys/linux/include/netinet/tcp_seq.h newlib/libc/sys/linux/include/netinet/tcp_timer.h newlib/libc/sys/linux/include/netinet/tcp_var.h newlib/libc/sys/linux/include/netinet/tcpip.h newlib/libc/sys/linux/include/netinet/udp.h newlib/libc/sys/linux/include/netinet/udp_var.h newlib/libc/sys/linux/include/netinet6/ah.h newlib/libc/sys/linux/include/netinet6/ah6.h newlib/libc/sys/linux/include/netinet6/esp.h newlib/libc/sys/linux/include/netinet6/esp6.h newlib/libc/sys/linux/include/netinet6/esp_rijndael.h newlib/libc/sys/linux/include/netinet6/icmp6.h newlib/libc/sys/linux/include/netinet6/in6.h newlib/libc/sys/linux/include/netinet6/in6_gif.h newlib/libc/sys/linux/include/netinet6/in6_ifattach.h newlib/libc/sys/linux/include/netinet6/in6_pcb.h newlib/libc/sys/linux/include/netinet6/in6_prefix.h newlib/libc/sys/linux/include/netinet6/in6_var.h newlib/libc/sys/linux/include/netinet6/ip6.h newlib/libc/sys/linux/include/netinet6/ip6_ecn.h newlib/libc/sys/linux/include/netinet6/ip6_fw.h newlib/libc/sys/linux/include/netinet6/ip6_mroute.h newlib/libc/sys/linux/include/netinet6/ip6_var.h newlib/libc/sys/linux/include/netinet6/ip6protosw.h newlib/libc/sys/linux/include/netinet6/ipcomp.h newlib/libc/sys/linux/include/netinet6/ipcomp6.h newlib/libc/sys/linux/include/netinet6/ipsec.h newlib/libc/sys/linux/include/netinet6/ipsec6.h newlib/libc/sys/linux/include/netinet6/mld6_var.h newlib/libc/sys/linux/include/netinet6/nd6.h newlib/libc/sys/linux/include/netinet6/pim6.h newlib/libc/sys/linux/include/netinet6/pim6_var.h newlib/libc/sys/linux/include/netinet6/raw_ip6.h newlib/libc/sys/linux/include/netinet6/scope6_var.h newlib/libc/sys/linux/include/netinet6/tcp6_var.h newlib/libc/sys/linux/include/netinet6/udp6_var.h newlib/libc/sys/linux/include/netns/idp.h newlib/libc/sys/linux/include/netns/idp_var.h newlib/libc/sys/linux/include/netns/ns.h newlib/libc/sys/linux/include/netns/ns_error.h newlib/libc/sys/linux/include/netns/ns_if.h newlib/libc/sys/linux/include/netns/ns_pcb.h newlib/libc/sys/linux/include/netns/sp.h newlib/libc/sys/linux/include/netns/spidp.h newlib/libc/sys/linux/include/netns/spp_debug.h newlib/libc/sys/linux/include/netns/spp_timer.h newlib/libc/sys/linux/include/netns/spp_var.h newlib/libc/sys/linux/include/paths.h newlib/libc/sys/linux/include/pthread.h newlib/libc/sys/linux/include/regex.h newlib/libc/sys/linux/include/resolv.h newlib/libc/sys/linux/include/rpc/Makefile newlib/libc/sys/linux/include/rpc/auth.h newlib/libc/sys/linux/include/rpc/auth_des.h newlib/libc/sys/linux/include/rpc/auth_kerb.h newlib/libc/sys/linux/include/rpc/auth_unix.h newlib/libc/sys/linux/include/rpc/clnt.h newlib/libc/sys/linux/include/rpc/clnt_soc.h newlib/libc/sys/linux/include/rpc/clnt_stat.h newlib/libc/sys/linux/include/rpc/des.h newlib/libc/sys/linux/include/rpc/des_crypt.h newlib/libc/sys/linux/include/rpc/nettype.h newlib/libc/sys/linux/include/rpc/pmap_clnt.h newlib/libc/sys/linux/include/rpc/pmap_prot.h newlib/libc/sys/linux/include/rpc/pmap_rmt.h newlib/libc/sys/linux/include/rpc/raw.h newlib/libc/sys/linux/include/rpc/rpc.h newlib/libc/sys/linux/include/rpc/rpc_com.h newlib/libc/sys/linux/include/rpc/rpc_msg.h newlib/libc/sys/linux/include/rpc/rpcb_clnt.h newlib/libc/sys/linux/include/rpc/rpcb_prot.h newlib/libc/sys/linux/include/rpc/rpcb_prot.x newlib/libc/sys/linux/include/rpc/rpcent.h newlib/libc/sys/linux/include/rpc/svc.h newlib/libc/sys/linux/include/rpc/svc_auth.h newlib/libc/sys/linux/include/rpc/svc_dg.h newlib/libc/sys/linux/include/rpc/svc_soc.h newlib/libc/sys/linux/include/rpc/types.h newlib/libc/sys/linux/include/rpc/xdr.h newlib/libc/sys/linux/include/rune.h newlib/libc/sys/linux/include/runetype.h newlib/libc/sys/linux/include/sched.h newlib/libc/sys/linux/include/semaphore.h newlib/libc/sys/linux/include/setjmp.h newlib/libc/sys/linux/include/setlocale.h newlib/libc/sys/linux/include/stdint.h newlib/libc/sys/linux/include/time.h newlib/libc/sys/linux/include/un-namespace.h newlib/libc/sys/linux/include/unistd.h newlib/libc/sys/linux/include/wordexp.h newlib/libc/sys/linux/inode.c newlib/libc/sys/linux/internal_statvfs.c newlib/libc/sys/linux/intl/Makefile.am newlib/libc/sys/linux/intl/Makefile.in newlib/libc/sys/linux/intl/bindtextdom.c newlib/libc/sys/linux/intl/catgets.c newlib/libc/sys/linux/intl/catgetsinfo.h newlib/libc/sys/linux/intl/config.h newlib/libc/sys/linux/intl/dcgettext.c newlib/libc/sys/linux/intl/dcigettext.c newlib/libc/sys/linux/intl/dcngettext.c newlib/libc/sys/linux/intl/dgettext.c newlib/libc/sys/linux/intl/dngettext.c newlib/libc/sys/linux/intl/explodename.c newlib/libc/sys/linux/intl/finddomain.c newlib/libc/sys/linux/intl/gettext.c newlib/libc/sys/linux/intl/gettext.h newlib/libc/sys/linux/intl/gettextP.h newlib/libc/sys/linux/intl/hash-string.h newlib/libc/sys/linux/intl/l10nflist.c newlib/libc/sys/linux/intl/lcl_stpcpy.c newlib/libc/sys/linux/intl/loadinfo.h newlib/libc/sys/linux/intl/loadmsgcat.c newlib/libc/sys/linux/intl/localealias.c newlib/libc/sys/linux/intl/ngettext.c newlib/libc/sys/linux/intl/open_catalog.c newlib/libc/sys/linux/intl/plural.c newlib/libc/sys/linux/intl/plural.y newlib/libc/sys/linux/intl/textdomain.c newlib/libc/sys/linux/io.c newlib/libc/sys/linux/io64.c newlib/libc/sys/linux/ipc.c newlib/libc/sys/linux/isatty.c newlib/libc/sys/linux/kernel_sigaction.h newlib/libc/sys/linux/libc-internal.h newlib/libc/sys/linux/libc-symbols.h newlib/libc/sys/linux/libc-tsd.h newlib/libc/sys/linux/libintl.h newlib/libc/sys/linux/linux.c newlib/libc/sys/linux/linux_fsinfo.h newlib/libc/sys/linux/linuxthreads/LICENSE newlib/libc/sys/linux/linuxthreads/Makefile.am newlib/libc/sys/linux/linuxthreads/Makefile.in newlib/libc/sys/linux/linuxthreads/aclocal.m4 newlib/libc/sys/linux/linuxthreads/attr.c newlib/libc/sys/linux/linuxthreads/barrier.c newlib/libc/sys/linux/linuxthreads/bits/initspin.h newlib/libc/sys/linux/linuxthreads/bits/libc-lock.h newlib/libc/sys/linux/linuxthreads/bits/libc-tsd.h newlib/libc/sys/linux/linuxthreads/bits/local_lim.h newlib/libc/sys/linux/linuxthreads/bits/posix_opt.h newlib/libc/sys/linux/linuxthreads/bits/pthreadtypes.h newlib/libc/sys/linux/linuxthreads/bits/sigthread.h newlib/libc/sys/linux/linuxthreads/bp-sym.h newlib/libc/sys/linux/linuxthreads/cancel.c newlib/libc/sys/linux/linuxthreads/condvar.c newlib/libc/sys/linux/linuxthreads/config.h newlib/libc/sys/linux/linuxthreads/configure newlib/libc/sys/linux/linuxthreads/configure.in newlib/libc/sys/linux/linuxthreads/defs.awk newlib/libc/sys/linux/linuxthreads/ecmutex.c newlib/libc/sys/linux/linuxthreads/events.c newlib/libc/sys/linux/linuxthreads/getcpuclockid.c newlib/libc/sys/linux/linuxthreads/getreent.c newlib/libc/sys/linux/linuxthreads/internals.h newlib/libc/sys/linux/linuxthreads/join.c newlib/libc/sys/linux/linuxthreads/joinrace.c newlib/libc/sys/linux/linuxthreads/kernel-features.h newlib/libc/sys/linux/linuxthreads/libc-internal.h newlib/libc/sys/linux/linuxthreads/libc-symbols.h newlib/libc/sys/linux/linuxthreads/linuxthreads.texi newlib/libc/sys/linux/linuxthreads/lockfile.c newlib/libc/sys/linux/linuxthreads/machine/Makefile.am newlib/libc/sys/linux/linuxthreads/machine/Makefile.in newlib/libc/sys/linux/linuxthreads/machine/aclocal.m4 newlib/libc/sys/linux/linuxthreads/machine/configure newlib/libc/sys/linux/linuxthreads/machine/configure.in newlib/libc/sys/linux/linuxthreads/machine/generic/generic-sysdep.h newlib/libc/sys/linux/linuxthreads/machine/i386/Makefile.am newlib/libc/sys/linux/linuxthreads/machine/i386/Makefile.in newlib/libc/sys/linux/linuxthreads/machine/i386/aclocal.m4 newlib/libc/sys/linux/linuxthreads/machine/i386/bp-asm.h newlib/libc/sys/linux/linuxthreads/machine/i386/clone.S newlib/libc/sys/linux/linuxthreads/machine/i386/configure newlib/libc/sys/linux/linuxthreads/machine/i386/configure.in newlib/libc/sys/linux/linuxthreads/machine/i386/i386-sysdep.S newlib/libc/sys/linux/linuxthreads/machine/i386/i386-sysdep.h newlib/libc/sys/linux/linuxthreads/machine/i386/pspinlock.c newlib/libc/sys/linux/linuxthreads/machine/i386/pt-machine.h newlib/libc/sys/linux/linuxthreads/machine/i386/sigcontextinfo.h newlib/libc/sys/linux/linuxthreads/machine/i386/stackinfo.h newlib/libc/sys/linux/linuxthreads/machine/i386/sysdep.S newlib/libc/sys/linux/linuxthreads/machine/i386/sysdep.h newlib/libc/sys/linux/linuxthreads/machine/i386/useldt.h newlib/libc/sys/linux/linuxthreads/manager.c newlib/libc/sys/linux/linuxthreads/mq_notify.c newlib/libc/sys/linux/linuxthreads/mutex.c newlib/libc/sys/linux/linuxthreads/no-tsd.c newlib/libc/sys/linux/linuxthreads/oldsemaphore.c newlib/libc/sys/linux/linuxthreads/posix-timer.h newlib/libc/sys/linux/linuxthreads/prio.c newlib/libc/sys/linux/linuxthreads/proc_service.h newlib/libc/sys/linux/linuxthreads/pt-machine.c newlib/libc/sys/linux/linuxthreads/ptclock_gettime.c newlib/libc/sys/linux/linuxthreads/ptclock_settime.c newlib/libc/sys/linux/linuxthreads/ptfork.c newlib/libc/sys/linux/linuxthreads/pthread.c newlib/libc/sys/linux/linuxthreads/ptlongjmp.c newlib/libc/sys/linux/linuxthreads/queue.h newlib/libc/sys/linux/linuxthreads/reent.c newlib/libc/sys/linux/linuxthreads/reqsyscalls.c newlib/libc/sys/linux/linuxthreads/restart.h newlib/libc/sys/linux/linuxthreads/rwlock.c newlib/libc/sys/linux/linuxthreads/semaphore.c newlib/libc/sys/linux/linuxthreads/semaphore.h newlib/libc/sys/linux/linuxthreads/shlib-compat.h newlib/libc/sys/linux/linuxthreads/signals.c newlib/libc/sys/linux/linuxthreads/specific.c newlib/libc/sys/linux/linuxthreads/spinlock.c newlib/libc/sys/linux/linuxthreads/spinlock.h newlib/libc/sys/linux/linuxthreads/sysctl.c newlib/libc/sys/linux/linuxthreads/td_init.c newlib/libc/sys/linux/linuxthreads/td_log.c newlib/libc/sys/linux/linuxthreads/td_symbol_list.c newlib/libc/sys/linux/linuxthreads/td_ta_clear_event.c newlib/libc/sys/linux/linuxthreads/td_ta_delete.c newlib/libc/sys/linux/linuxthreads/td_ta_enable_stats.c newlib/libc/sys/linux/linuxthreads/td_ta_event_addr.c newlib/libc/sys/linux/linuxthreads/td_ta_event_getmsg.c newlib/libc/sys/linux/linuxthreads/td_ta_get_nthreads.c newlib/libc/sys/linux/linuxthreads/td_ta_get_ph.c newlib/libc/sys/linux/linuxthreads/td_ta_get_stats.c newlib/libc/sys/linux/linuxthreads/td_ta_map_id2thr.c newlib/libc/sys/linux/linuxthreads/td_ta_map_lwp2thr.c newlib/libc/sys/linux/linuxthreads/td_ta_new.c newlib/libc/sys/linux/linuxthreads/td_ta_reset_stats.c newlib/libc/sys/linux/linuxthreads/td_ta_set_event.c newlib/libc/sys/linux/linuxthreads/td_ta_setconcurrency.c newlib/libc/sys/linux/linuxthreads/td_ta_thr_iter.c newlib/libc/sys/linux/linuxthreads/td_ta_tsd_iter.c newlib/libc/sys/linux/linuxthreads/td_thr_clear_event.c newlib/libc/sys/linux/linuxthreads/td_thr_dbresume.c newlib/libc/sys/linux/linuxthreads/td_thr_dbsuspend.c newlib/libc/sys/linux/linuxthreads/td_thr_event_enable.c newlib/libc/sys/linux/linuxthreads/td_thr_event_getmsg.c newlib/libc/sys/linux/linuxthreads/td_thr_get_info.c newlib/libc/sys/linux/linuxthreads/td_thr_getfpregs.c newlib/libc/sys/linux/linuxthreads/td_thr_getgregs.c newlib/libc/sys/linux/linuxthreads/td_thr_getxregs.c newlib/libc/sys/linux/linuxthreads/td_thr_getxregsize.c newlib/libc/sys/linux/linuxthreads/td_thr_set_event.c newlib/libc/sys/linux/linuxthreads/td_thr_setfpregs.c newlib/libc/sys/linux/linuxthreads/td_thr_setgregs.c newlib/libc/sys/linux/linuxthreads/td_thr_setprio.c newlib/libc/sys/linux/linuxthreads/td_thr_setsigpending.c newlib/libc/sys/linux/linuxthreads/td_thr_setxregs.c newlib/libc/sys/linux/linuxthreads/td_thr_sigsetmask.c newlib/libc/sys/linux/linuxthreads/td_thr_tsd.c newlib/libc/sys/linux/linuxthreads/td_thr_validate.c newlib/libc/sys/linux/linuxthreads/testrtsig.h newlib/libc/sys/linux/linuxthreads/thread_db.h newlib/libc/sys/linux/linuxthreads/thread_dbP.h newlib/libc/sys/linux/linuxthreads/timer_create.c newlib/libc/sys/linux/linuxthreads/timer_delete.c newlib/libc/sys/linux/linuxthreads/timer_getoverr.c newlib/libc/sys/linux/linuxthreads/timer_gettime.c newlib/libc/sys/linux/linuxthreads/timer_routines.c newlib/libc/sys/linux/linuxthreads/timer_settime.c newlib/libc/sys/linux/linuxthreads/tst-cancel.c newlib/libc/sys/linux/linuxthreads/tst-context.c newlib/libc/sys/linux/linuxthreads/tststack.c newlib/libc/sys/linux/linuxthreads/unload.c newlib/libc/sys/linux/linuxthreads/weaks.c newlib/libc/sys/linux/linuxthreads/wrapsyscall.c newlib/libc/sys/linux/machine/Makefile.am newlib/libc/sys/linux/machine/Makefile.in newlib/libc/sys/linux/machine/aclocal.m4 newlib/libc/sys/linux/machine/configure newlib/libc/sys/linux/machine/configure.in newlib/libc/sys/linux/machine/hp-timing.h newlib/libc/sys/linux/machine/i386/Makefile.am newlib/libc/sys/linux/machine/i386/Makefile.in newlib/libc/sys/linux/machine/i386/aclocal.m4 newlib/libc/sys/linux/machine/i386/atomic.h newlib/libc/sys/linux/machine/i386/configure newlib/libc/sys/linux/machine/i386/configure.in newlib/libc/sys/linux/machine/i386/crt0.c newlib/libc/sys/linux/machine/i386/dl-machine.h newlib/libc/sys/linux/machine/i386/dl-procinfo.c newlib/libc/sys/linux/machine/i386/dl-procinfo.h newlib/libc/sys/linux/machine/i386/get_clockfreq.c newlib/libc/sys/linux/machine/i386/getpagesize.c newlib/libc/sys/linux/machine/i386/hp-timing.c newlib/libc/sys/linux/machine/i386/hp-timing.h newlib/libc/sys/linux/machine/i386/huge_val.h newlib/libc/sys/linux/machine/i386/i386mach.h newlib/libc/sys/linux/machine/i386/include/endian.h newlib/libc/sys/linux/machine/i386/include/param.h newlib/libc/sys/linux/machine/i386/include/setjmp.h newlib/libc/sys/linux/machine/i386/include/termios.h newlib/libc/sys/linux/machine/i386/setjmp.S newlib/libc/sys/linux/machine/i386/sigaction.c newlib/libc/sys/linux/machine/i386/sigstack.h newlib/libc/sys/linux/machine/i386/socketcall.h newlib/libc/sys/linux/machine/i386/syscall.h newlib/libc/sys/linux/machine/i386/sysdep.h newlib/libc/sys/linux/machine/i386/weakalias.h newlib/libc/sys/linux/malign.c newlib/libc/sys/linux/malignr.c newlib/libc/sys/linux/mallinfor.c newlib/libc/sys/linux/malloc.c newlib/libc/sys/linux/mallocr.c newlib/libc/sys/linux/malloptr.c newlib/libc/sys/linux/mallstatsr.c newlib/libc/sys/linux/mcheck.c newlib/libc/sys/linux/mhooks.h newlib/libc/sys/linux/mmap.c newlib/libc/sys/linux/mntent.c newlib/libc/sys/linux/mntent_r.c newlib/libc/sys/linux/mq_close.c newlib/libc/sys/linux/mq_getattr.c newlib/libc/sys/linux/mq_notify.c newlib/libc/sys/linux/mq_open.c newlib/libc/sys/linux/mq_receive.c newlib/libc/sys/linux/mq_send.c newlib/libc/sys/linux/mq_setattr.c newlib/libc/sys/linux/mq_unlink.c newlib/libc/sys/linux/mqlocal.h newlib/libc/sys/linux/msize.c newlib/libc/sys/linux/msizer.c newlib/libc/sys/linux/mstats.c newlib/libc/sys/linux/mtrim.c newlib/libc/sys/linux/mtrimr.c newlib/libc/sys/linux/net/Makefile.am newlib/libc/sys/linux/net/Makefile.in newlib/libc/sys/linux/net/XXX-lookup.c newlib/libc/sys/linux/net/addr2ascii.c newlib/libc/sys/linux/net/alias-lookup.c newlib/libc/sys/linux/net/aliases.h newlib/libc/sys/linux/net/ascii2addr.c newlib/libc/sys/linux/net/base64.c newlib/libc/sys/linux/net/check_pf.c newlib/libc/sys/linux/net/databases.def newlib/libc/sys/linux/net/digits_dots.c newlib/libc/sys/linux/net/ether_aton.c newlib/libc/sys/linux/net/ether_aton_r.c newlib/libc/sys/linux/net/ether_hton.c newlib/libc/sys/linux/net/ether_line.c newlib/libc/sys/linux/net/ether_ntoa.c newlib/libc/sys/linux/net/ether_ntoa_r.c newlib/libc/sys/linux/net/ether_ntoh.c newlib/libc/sys/linux/net/etherent.h newlib/libc/sys/linux/net/ethers-lookup.c newlib/libc/sys/linux/net/function.def newlib/libc/sys/linux/net/getXXbyYY.c newlib/libc/sys/linux/net/getXXbyYY_r.c newlib/libc/sys/linux/net/getXXent.c newlib/libc/sys/linux/net/getXXent_r.c newlib/libc/sys/linux/net/getaddrinfo.c newlib/libc/sys/linux/net/getaliasent.c newlib/libc/sys/linux/net/getaliasent_r.c newlib/libc/sys/linux/net/getaliasname.c newlib/libc/sys/linux/net/getaliasname_r.c newlib/libc/sys/linux/net/gethstbyad.c newlib/libc/sys/linux/net/gethstbyad_r.c newlib/libc/sys/linux/net/gethstbynm.c newlib/libc/sys/linux/net/gethstbynm2.c newlib/libc/sys/linux/net/gethstbynm2_r.c newlib/libc/sys/linux/net/gethstbynm_r.c newlib/libc/sys/linux/net/gethstent.c newlib/libc/sys/linux/net/gethstent_r.c newlib/libc/sys/linux/net/getnameinfo.c newlib/libc/sys/linux/net/getnetbyad.c newlib/libc/sys/linux/net/getnetbyad_r.c newlib/libc/sys/linux/net/getnetbynm.c newlib/libc/sys/linux/net/getnetbynm_r.c newlib/libc/sys/linux/net/getnetent.c newlib/libc/sys/linux/net/getnetent_r.c newlib/libc/sys/linux/net/getnetgrent.c newlib/libc/sys/linux/net/getnetgrent_r.c newlib/libc/sys/linux/net/getnssent.c newlib/libc/sys/linux/net/getnssent_r.c newlib/libc/sys/linux/net/getproto.c newlib/libc/sys/linux/net/getproto_r.c newlib/libc/sys/linux/net/getprtent.c newlib/libc/sys/linux/net/getprtent_r.c newlib/libc/sys/linux/net/getprtname.c newlib/libc/sys/linux/net/getprtname_r.c newlib/libc/sys/linux/net/getrpcbyname.c newlib/libc/sys/linux/net/getrpcbyname_r.c newlib/libc/sys/linux/net/getrpcbynumber.c newlib/libc/sys/linux/net/getrpcbynumber_r.c newlib/libc/sys/linux/net/getrpcent.c newlib/libc/sys/linux/net/getrpcent_r.c newlib/libc/sys/linux/net/getservent.c newlib/libc/sys/linux/net/getservent_r.c newlib/libc/sys/linux/net/getsrvbynm.c newlib/libc/sys/linux/net/getsrvbynm_r.c newlib/libc/sys/linux/net/getsrvbypt.c newlib/libc/sys/linux/net/getsrvbypt_r.c newlib/libc/sys/linux/net/grp-lookup.c newlib/libc/sys/linux/net/herrno.c newlib/libc/sys/linux/net/hosts-lookup.c newlib/libc/sys/linux/net/ifaddrs.h newlib/libc/sys/linux/net/ifname.c newlib/libc/sys/linux/net/ifreq.c newlib/libc/sys/linux/net/ifreq.h newlib/libc/sys/linux/net/in6_addr.c newlib/libc/sys/linux/net/inet6_option.c newlib/libc/sys/linux/net/inet_addr.c newlib/libc/sys/linux/net/inet_lnaof.c newlib/libc/sys/linux/net/inet_mkadr.c newlib/libc/sys/linux/net/inet_net.c newlib/libc/sys/linux/net/inet_net_ntop.c newlib/libc/sys/linux/net/inet_net_pton.c newlib/libc/sys/linux/net/inet_neta.c newlib/libc/sys/linux/net/inet_netof.c newlib/libc/sys/linux/net/inet_ntoa.c newlib/libc/sys/linux/net/inet_ntop.c newlib/libc/sys/linux/net/inet_pton.c newlib/libc/sys/linux/net/issetugid-stub.c newlib/libc/sys/linux/net/key-lookup.c newlib/libc/sys/linux/net/local.h newlib/libc/sys/linux/net/netgroup.h newlib/libc/sys/linux/net/netgrp-lookup.c newlib/libc/sys/linux/net/network-lookup.c newlib/libc/sys/linux/net/not-cancel.h newlib/libc/sys/linux/net/ns_name.c newlib/libc/sys/linux/net/ns_netint.c newlib/libc/sys/linux/net/ns_parse.c newlib/libc/sys/linux/net/ns_print.c newlib/libc/sys/linux/net/ns_samedomain.c newlib/libc/sys/linux/net/ns_ttl.c newlib/libc/sys/linux/net/nsap_addr.c newlib/libc/sys/linux/net/nscd-types.h newlib/libc/sys/linux/net/nscd/nscd-client.h newlib/libc/sys/linux/net/nscd/nscd_proto.h newlib/libc/sys/linux/net/nss.h newlib/libc/sys/linux/net/nsswitch.c newlib/libc/sys/linux/net/nsswitch.h newlib/libc/sys/linux/net/opensock.c newlib/libc/sys/linux/net/proto-lookup.c newlib/libc/sys/linux/net/pwd-lookup.c newlib/libc/sys/linux/net/rcmd.c newlib/libc/sys/linux/net/rcmdsh.c newlib/libc/sys/linux/net/recv.c newlib/libc/sys/linux/net/res_comp.c newlib/libc/sys/linux/net/res_data.c newlib/libc/sys/linux/net/res_debug.c newlib/libc/sys/linux/net/res_debug.h newlib/libc/sys/linux/net/res_hconf.c newlib/libc/sys/linux/net/res_hconf.h newlib/libc/sys/linux/net/res_init.c newlib/libc/sys/linux/net/res_libc.c newlib/libc/sys/linux/net/res_mkquery.c newlib/libc/sys/linux/net/res_query.c newlib/libc/sys/linux/net/res_send.c newlib/libc/sys/linux/net/rexec.c newlib/libc/sys/linux/net/rpc-lookup.c newlib/libc/sys/linux/net/ruserpass.c newlib/libc/sys/linux/net/send.c newlib/libc/sys/linux/net/service-lookup.c newlib/libc/sys/linux/net/spwd-lookup.c newlib/libc/sys/linux/net/un-namespace.h newlib/libc/sys/linux/ntp_gettime.c newlib/libc/sys/linux/pathconf.c newlib/libc/sys/linux/pread.c newlib/libc/sys/linux/pread64.c newlib/libc/sys/linux/process.c newlib/libc/sys/linux/prof-freq.c newlib/libc/sys/linux/profile.c newlib/libc/sys/linux/psignal.c newlib/libc/sys/linux/pvallocr.c newlib/libc/sys/linux/pwrite.c newlib/libc/sys/linux/pwrite64.c newlib/libc/sys/linux/raise.c newlib/libc/sys/linux/readdir64.c newlib/libc/sys/linux/realloc.c newlib/libc/sys/linux/reallocr.c newlib/libc/sys/linux/realpath.c newlib/libc/sys/linux/rename.c newlib/libc/sys/linux/resource.c newlib/libc/sys/linux/scandir64.c newlib/libc/sys/linux/sched.c newlib/libc/sys/linux/select.c newlib/libc/sys/linux/seteuid.c newlib/libc/sys/linux/sethostid.c newlib/libc/sys/linux/sethostname.c newlib/libc/sys/linux/setrlimit64.c newlib/libc/sys/linux/shared.ld newlib/libc/sys/linux/shlib-compat.h newlib/libc/sys/linux/shm_open.c newlib/libc/sys/linux/shm_unlink.c newlib/libc/sys/linux/sig.c newlib/libc/sys/linux/sigaction.c newlib/libc/sys/linux/siglongjmp.c newlib/libc/sys/linux/signal.c newlib/libc/sys/linux/sigqueue.c newlib/libc/sys/linux/sigset.c newlib/libc/sys/linux/sigwait.c newlib/libc/sys/linux/sleep.c newlib/libc/sys/linux/socket.c newlib/libc/sys/linux/sockops.h newlib/libc/sys/linux/stack.c newlib/libc/sys/linux/statvfs.c newlib/libc/sys/linux/statvfs64.c newlib/libc/sys/linux/strsignal.c newlib/libc/sys/linux/strverscmp.c newlib/libc/sys/linux/sys/_types.h newlib/libc/sys/linux/sys/cdefs.h newlib/libc/sys/linux/sys/dirent.h newlib/libc/sys/linux/sys/dlfcn.h newlib/libc/sys/linux/sys/elfclass.h newlib/libc/sys/linux/sys/errno.h newlib/libc/sys/linux/sys/event.h newlib/libc/sys/linux/sys/fcntl.h newlib/libc/sys/linux/sys/features.h newlib/libc/sys/linux/sys/file.h newlib/libc/sys/linux/sys/ioccom.h newlib/libc/sys/linux/sys/ioctl.h newlib/libc/sys/linux/sys/libc-lock.h newlib/libc/sys/linux/sys/libc-tsd.h newlib/libc/sys/linux/sys/link.h newlib/libc/sys/linux/sys/linux_time.h newlib/libc/sys/linux/sys/lock.h newlib/libc/sys/linux/sys/param.h newlib/libc/sys/linux/sys/resource.h newlib/libc/sys/linux/sys/select.h newlib/libc/sys/linux/sys/signal.h newlib/libc/sys/linux/sys/socket.h newlib/libc/sys/linux/sys/sockio.h newlib/libc/sys/linux/sys/stat.h newlib/libc/sys/linux/sys/stdint.h newlib/libc/sys/linux/sys/stdio.h newlib/libc/sys/linux/sys/string.h newlib/libc/sys/linux/sys/termios.h newlib/libc/sys/linux/sys/time.h newlib/libc/sys/linux/sys/types.h newlib/libc/sys/linux/sys/unistd.h newlib/libc/sys/linux/sys/utime.h newlib/libc/sys/linux/sys/utmp.h newlib/libc/sys/linux/sys/utsname.h newlib/libc/sys/linux/sys/wait.h newlib/libc/sys/linux/sysconf.c newlib/libc/sys/linux/sysctl.c newlib/libc/sys/linux/systat.c newlib/libc/sys/linux/system.c newlib/libc/sys/linux/tcdrain.c newlib/libc/sys/linux/tcsendbrk.c newlib/libc/sys/linux/termios.c newlib/libc/sys/linux/thread-m.h newlib/libc/sys/linux/time.c newlib/libc/sys/linux/ttyname_r.c newlib/libc/sys/linux/usleep.c newlib/libc/sys/linux/utimes.c newlib/libc/sys/linux/vallocr.c newlib/libc/sys/linux/versionsort.c newlib/libc/sys/linux/versionsort64.c newlib/libc/sys/linux/wait.c newlib/libc/sys/m88kbug/Makefile.am newlib/libc/sys/m88kbug/Makefile.in newlib/libc/sys/m88kbug/aclocal.m4 newlib/libc/sys/m88kbug/configure newlib/libc/sys/m88kbug/configure.in newlib/libc/sys/m88kbug/crt0.c newlib/libc/sys/m88kbug/sys/systraps.h newlib/libc/sys/m88kbug/syscalls.c newlib/libc/sys/mmixware/Makefile.am newlib/libc/sys/mmixware/Makefile.in newlib/libc/sys/mmixware/_exit.c newlib/libc/sys/mmixware/access.c newlib/libc/sys/mmixware/aclocal.m4 newlib/libc/sys/mmixware/chmod.c newlib/libc/sys/mmixware/chown.c newlib/libc/sys/mmixware/close.c newlib/libc/sys/mmixware/configure newlib/libc/sys/mmixware/configure.in newlib/libc/sys/mmixware/creat.c newlib/libc/sys/mmixware/crt0.c newlib/libc/sys/mmixware/execv.c newlib/libc/sys/mmixware/execve.c newlib/libc/sys/mmixware/fork.c newlib/libc/sys/mmixware/fstat.c newlib/libc/sys/mmixware/getpid.c newlib/libc/sys/mmixware/gettime.c newlib/libc/sys/mmixware/isatty.c newlib/libc/sys/mmixware/kill.c newlib/libc/sys/mmixware/link.c newlib/libc/sys/mmixware/lseek.c newlib/libc/sys/mmixware/open.c newlib/libc/sys/mmixware/pipe.c newlib/libc/sys/mmixware/read.c newlib/libc/sys/mmixware/sbrk.c newlib/libc/sys/mmixware/setjmp.S newlib/libc/sys/mmixware/stat.c newlib/libc/sys/mmixware/sys/syscall.h newlib/libc/sys/mmixware/time.c newlib/libc/sys/mmixware/times.c newlib/libc/sys/mmixware/unlink.c newlib/libc/sys/mmixware/utime.c newlib/libc/sys/mmixware/wait.c newlib/libc/sys/mmixware/write.c newlib/libc/sys/netware/Makefile.am newlib/libc/sys/netware/Makefile.in newlib/libc/sys/netware/aclocal.m4 newlib/libc/sys/netware/configure newlib/libc/sys/netware/configure.in newlib/libc/sys/netware/crt0.c newlib/libc/sys/netware/getpid.c newlib/libc/sys/netware/link.c newlib/libc/sys/rdos/Makefile.am newlib/libc/sys/rdos/Makefile.in newlib/libc/sys/rdos/aclocal.m4 newlib/libc/sys/rdos/chown.c newlib/libc/sys/rdos/close.c newlib/libc/sys/rdos/config.h newlib/libc/sys/rdos/configure newlib/libc/sys/rdos/configure.in newlib/libc/sys/rdos/crt0.S newlib/libc/sys/rdos/execve.c newlib/libc/sys/rdos/fork.c newlib/libc/sys/rdos/fstat.c newlib/libc/sys/rdos/getenv.c newlib/libc/sys/rdos/getpid.c newlib/libc/sys/rdos/gettod.c newlib/libc/sys/rdos/isatty.c newlib/libc/sys/rdos/kill.c newlib/libc/sys/rdos/link.c newlib/libc/sys/rdos/lseek.c newlib/libc/sys/rdos/open.c newlib/libc/sys/rdos/rdos.S newlib/libc/sys/rdos/rdos.h newlib/libc/sys/rdos/rdoshelp.c newlib/libc/sys/rdos/read.c newlib/libc/sys/rdos/readlink.c newlib/libc/sys/rdos/sbrk.c newlib/libc/sys/rdos/stat.c newlib/libc/sys/rdos/symlink.c newlib/libc/sys/rdos/times.c newlib/libc/sys/rdos/unlink.c newlib/libc/sys/rdos/user.def newlib/libc/sys/rdos/wait.c newlib/libc/sys/rdos/write.c newlib/libc/sys/rtems/Makefile.am newlib/libc/sys/rtems/Makefile.in newlib/libc/sys/rtems/aclocal.m4 newlib/libc/sys/rtems/configure newlib/libc/sys/rtems/configure.in newlib/libc/sys/rtems/crt0.c newlib/libc/sys/rtems/dummysys.c newlib/libc/sys/rtems/include/limits.h newlib/libc/sys/rtems/machine/limits.h newlib/libc/sys/rtems/machine/param.h newlib/libc/sys/rtems/sys/dirent.h newlib/libc/sys/rtems/sys/param.h newlib/libc/sys/rtems/sys/queue.h newlib/libc/sys/rtems/sys/syslimits.h newlib/libc/sys/rtems/sys/utime.h newlib/libc/sys/sh/Makefile.am newlib/libc/sys/sh/Makefile.in newlib/libc/sys/sh/aclocal.m4 newlib/libc/sys/sh/configure newlib/libc/sys/sh/configure.in newlib/libc/sys/sh/creat.c newlib/libc/sys/sh/crt0.S newlib/libc/sys/sh/ftruncate.c newlib/libc/sys/sh/sys/syscall.h newlib/libc/sys/sh/syscalls.c newlib/libc/sys/sh/trap.S newlib/libc/sys/sh/truncate.c newlib/libc/sys/sparc64/Makefile.am newlib/libc/sys/sparc64/Makefile.in newlib/libc/sys/sparc64/_exit.S newlib/libc/sys/sparc64/_main.c newlib/libc/sys/sparc64/aclocal.m4 newlib/libc/sys/sparc64/cerror.S newlib/libc/sys/sparc64/closedir.c newlib/libc/sys/sparc64/configure newlib/libc/sys/sparc64/configure.in newlib/libc/sys/sparc64/creat.c newlib/libc/sys/sparc64/crt0.S newlib/libc/sys/sparc64/dup2.S newlib/libc/sys/sparc64/execve.S newlib/libc/sys/sparc64/ieee.c newlib/libc/sys/sparc64/isatty.c newlib/libc/sys/sparc64/lstat.S newlib/libc/sys/sparc64/opendir.c newlib/libc/sys/sparc64/readdir.c newlib/libc/sys/sparc64/rewinddir.c newlib/libc/sys/sparc64/sbrk.S newlib/libc/sys/sparc64/scandir.c newlib/libc/sys/sparc64/seekdir.c newlib/libc/sys/sparc64/sigsetjmp.S newlib/libc/sys/sparc64/stat.S newlib/libc/sys/sparc64/sys/dirent.h newlib/libc/sys/sparc64/sys/fcntl.h newlib/libc/sys/sparc64/sys/file.h newlib/libc/sys/sparc64/sys/stat.h newlib/libc/sys/sparc64/sys/syscall.h newlib/libc/sys/sparc64/sys/syscallasm.h newlib/libc/sys/sparc64/sys/termios.h newlib/libc/sys/sparc64/sys/time.h newlib/libc/sys/sparc64/sys/utime.h newlib/libc/sys/sparc64/sys/utmp.h newlib/libc/sys/sparc64/sys/wait.h newlib/libc/sys/sparc64/telldir.c newlib/libc/sys/sparc64/template.S newlib/libc/sys/sparc64/template_r.S newlib/libc/sys/sparc64/utime.S newlib/libc/sys/sparc64/utime2.c newlib/libc/sys/sparc64/wait.S newlib/libc/sys/sun4/Makefile.am newlib/libc/sys/sun4/Makefile.in newlib/libc/sys/sun4/_main.c newlib/libc/sys/sun4/aclocal.m4 newlib/libc/sys/sun4/configure newlib/libc/sys/sun4/configure.in newlib/libc/sys/sun4/ieee.c newlib/libc/sys/sun4/sys/dirent.h newlib/libc/sys/sun4/sys/file.h newlib/libc/sys/sun4/sys/termios.h newlib/libc/sys/sun4/sys/utime.h newlib/libc/sys/sun4/sys/utmp.h newlib/libc/sys/sun4/sys/wait.h newlib/libc/sys/sysmec/Makefile.am newlib/libc/sys/sysmec/Makefile.in newlib/libc/sys/sysmec/_exit.c newlib/libc/sys/sysmec/access.c newlib/libc/sys/sysmec/aclocal.m4 newlib/libc/sys/sysmec/chmod.c newlib/libc/sys/sysmec/chown.c newlib/libc/sys/sysmec/close.c newlib/libc/sys/sysmec/configure newlib/libc/sys/sysmec/configure.in newlib/libc/sys/sysmec/creat.c newlib/libc/sys/sysmec/crt0.S newlib/libc/sys/sysmec/crt1.c newlib/libc/sys/sysmec/execv.c newlib/libc/sys/sysmec/execve.c newlib/libc/sys/sysmec/fork.c newlib/libc/sys/sysmec/fstat.c newlib/libc/sys/sysmec/getpid.c newlib/libc/sys/sysmec/gettime.c newlib/libc/sys/sysmec/isatty.c newlib/libc/sys/sysmec/kill.c newlib/libc/sys/sysmec/lseek.c newlib/libc/sys/sysmec/open.c newlib/libc/sys/sysmec/pipe.c newlib/libc/sys/sysmec/read.c newlib/libc/sys/sysmec/sbrk.c newlib/libc/sys/sysmec/stat.c newlib/libc/sys/sysmec/sys/syscall.h newlib/libc/sys/sysmec/time.c newlib/libc/sys/sysmec/times.c newlib/libc/sys/sysmec/trap.S newlib/libc/sys/sysmec/unlink.c newlib/libc/sys/sysmec/utime.c newlib/libc/sys/sysmec/wait.c newlib/libc/sys/sysmec/write.c newlib/libc/sys/sysnec810/Makefile.am newlib/libc/sys/sysnec810/Makefile.in newlib/libc/sys/sysnec810/aclocal.m4 newlib/libc/sys/sysnec810/configure newlib/libc/sys/sysnec810/configure.in newlib/libc/sys/sysnec810/crt0.S newlib/libc/sys/sysnec810/io.S newlib/libc/sys/sysnec810/misc.c newlib/libc/sys/sysnec810/sbrk.c newlib/libc/sys/sysnec810/write.c newlib/libc/sys/sysnecv850/Makefile.am newlib/libc/sys/sysnecv850/Makefile.in newlib/libc/sys/sysnecv850/_exit.c newlib/libc/sys/sysnecv850/access.c newlib/libc/sys/sysnecv850/aclocal.m4 newlib/libc/sys/sysnecv850/chmod.c newlib/libc/sys/sysnecv850/chown.c newlib/libc/sys/sysnecv850/close.c newlib/libc/sys/sysnecv850/configure newlib/libc/sys/sysnecv850/configure.in newlib/libc/sys/sysnecv850/creat.c newlib/libc/sys/sysnecv850/crt0.S newlib/libc/sys/sysnecv850/crt1.c newlib/libc/sys/sysnecv850/execv.c newlib/libc/sys/sysnecv850/execve.c newlib/libc/sys/sysnecv850/fork.c newlib/libc/sys/sysnecv850/fstat.c newlib/libc/sys/sysnecv850/getpid.c newlib/libc/sys/sysnecv850/gettime.c newlib/libc/sys/sysnecv850/isatty.c newlib/libc/sys/sysnecv850/kill.c newlib/libc/sys/sysnecv850/link.c newlib/libc/sys/sysnecv850/lseek.c newlib/libc/sys/sysnecv850/open.c newlib/libc/sys/sysnecv850/pipe.c newlib/libc/sys/sysnecv850/read.c newlib/libc/sys/sysnecv850/sbrk.c newlib/libc/sys/sysnecv850/stat.c newlib/libc/sys/sysnecv850/sys/syscall.h newlib/libc/sys/sysnecv850/time.c newlib/libc/sys/sysnecv850/times.c newlib/libc/sys/sysnecv850/trap.S newlib/libc/sys/sysnecv850/unlink.c newlib/libc/sys/sysnecv850/utime.c newlib/libc/sys/sysnecv850/wait.c newlib/libc/sys/sysnecv850/write.c newlib/libc/sys/sysvi386/Makefile.am newlib/libc/sys/sysvi386/Makefile.in newlib/libc/sys/sysvi386/_exit.S newlib/libc/sys/sysvi386/_longjmp.S newlib/libc/sys/sysvi386/_setjmp.S newlib/libc/sys/sysvi386/access.S newlib/libc/sys/sysvi386/aclocal.m4 newlib/libc/sys/sysvi386/alarm.S newlib/libc/sys/sysvi386/brk.S newlib/libc/sys/sysvi386/cerror.S newlib/libc/sys/sysvi386/chdir.S newlib/libc/sys/sysvi386/chmod.S newlib/libc/sys/sysvi386/close.S newlib/libc/sys/sysvi386/closedir.c newlib/libc/sys/sysvi386/configure newlib/libc/sys/sysvi386/configure.in newlib/libc/sys/sysvi386/crt0.c newlib/libc/sys/sysvi386/dup.c newlib/libc/sys/sysvi386/dup2.c newlib/libc/sys/sysvi386/exec.c newlib/libc/sys/sysvi386/execve.S newlib/libc/sys/sysvi386/fcntl.S newlib/libc/sys/sysvi386/fork.S newlib/libc/sys/sysvi386/fpathconf.S newlib/libc/sys/sysvi386/fps.S newlib/libc/sys/sysvi386/fpx.c newlib/libc/sys/sysvi386/fstat.S newlib/libc/sys/sysvi386/getdents.S newlib/libc/sys/sysvi386/getegid.S newlib/libc/sys/sysvi386/geteuid.S newlib/libc/sys/sysvi386/getgid.S newlib/libc/sys/sysvi386/getgroups.S newlib/libc/sys/sysvi386/getpid.S newlib/libc/sys/sysvi386/getuid.S newlib/libc/sys/sysvi386/ioctl.S newlib/libc/sys/sysvi386/isatty.c newlib/libc/sys/sysvi386/kill.S newlib/libc/sys/sysvi386/link.S newlib/libc/sys/sysvi386/lseek.S newlib/libc/sys/sysvi386/mkdir.S newlib/libc/sys/sysvi386/open.S newlib/libc/sys/sysvi386/opendir.c newlib/libc/sys/sysvi386/pathconf.S newlib/libc/sys/sysvi386/pause.S newlib/libc/sys/sysvi386/pipe.S newlib/libc/sys/sysvi386/read.S newlib/libc/sys/sysvi386/readdir.c newlib/libc/sys/sysvi386/rename.S newlib/libc/sys/sysvi386/rewinddir.c newlib/libc/sys/sysvi386/rmdir.S newlib/libc/sys/sysvi386/sbrk.c newlib/libc/sys/sysvi386/scandir.c newlib/libc/sys/sysvi386/seekdir.c newlib/libc/sys/sysvi386/setgid.S newlib/libc/sys/sysvi386/setuid.S newlib/libc/sys/sysvi386/sigaction.S newlib/libc/sys/sysvi386/signal.S newlib/libc/sys/sysvi386/sigprocmask.S newlib/libc/sys/sysvi386/sleep.c newlib/libc/sys/sysvi386/speed.c newlib/libc/sys/sysvi386/stat.S newlib/libc/sys/sysvi386/sys/dirent.h newlib/libc/sys/sysvi386/sys/setjmp.h newlib/libc/sys/sysvi386/sys/termio.h newlib/libc/sys/sysvi386/sys/termios.h newlib/libc/sys/sysvi386/sys/utime.h newlib/libc/sys/sysvi386/sys/utmp.h newlib/libc/sys/sysvi386/sys/wait.h newlib/libc/sys/sysvi386/sysconf.S newlib/libc/sys/sysvi386/tcgetattr.c newlib/libc/sys/sysvi386/tcline.c newlib/libc/sys/sysvi386/tcsetattr.c newlib/libc/sys/sysvi386/telldir.c newlib/libc/sys/sysvi386/time.S newlib/libc/sys/sysvi386/times.S newlib/libc/sys/sysvi386/unlink.S newlib/libc/sys/sysvi386/utime.S newlib/libc/sys/sysvi386/wait.S newlib/libc/sys/sysvi386/waitpid.S newlib/libc/sys/sysvi386/write.S newlib/libc/sys/sysvnecv70/Makefile.am newlib/libc/sys/sysvnecv70/Makefile.in newlib/libc/sys/sysvnecv70/aclocal.m4 newlib/libc/sys/sysvnecv70/cerror.S newlib/libc/sys/sysvnecv70/close.S newlib/libc/sys/sysvnecv70/configure newlib/libc/sys/sysvnecv70/configure.in newlib/libc/sys/sysvnecv70/crt0.S newlib/libc/sys/sysvnecv70/exit.S newlib/libc/sys/sysvnecv70/fps.S newlib/libc/sys/sysvnecv70/fpx.c newlib/libc/sys/sysvnecv70/fstat.S newlib/libc/sys/sysvnecv70/ioctl.S newlib/libc/sys/sysvnecv70/isatty.S newlib/libc/sys/sysvnecv70/lseek.S newlib/libc/sys/sysvnecv70/open.S newlib/libc/sys/sysvnecv70/read.S newlib/libc/sys/sysvnecv70/sbrk.S newlib/libc/sys/sysvnecv70/sysv60.S newlib/libc/sys/sysvnecv70/sysvnecv70.tex newlib/libc/sys/sysvnecv70/write.S newlib/libc/sys/tic80/Makefile.am newlib/libc/sys/tic80/Makefile.in newlib/libc/sys/tic80/aclocal.m4 newlib/libc/sys/tic80/configure newlib/libc/sys/tic80/configure.in newlib/libc/sys/tic80/crt0.c newlib/libc/sys/w65/Makefile.am newlib/libc/sys/w65/Makefile.in newlib/libc/sys/w65/aclocal.m4 newlib/libc/sys/w65/configure newlib/libc/sys/w65/configure.in newlib/libc/sys/w65/crt0.c newlib/libc/sys/w65/sys/syscall.h newlib/libc/sys/w65/syscalls.c newlib/libc/sys/w65/trap.c newlib/libc/sys/z8ksim/Makefile.am newlib/libc/sys/z8ksim/Makefile.in newlib/libc/sys/z8ksim/aclocal.m4 newlib/libc/sys/z8ksim/configure newlib/libc/sys/z8ksim/configure.in newlib/libc/sys/z8ksim/crt0.c newlib/libc/sys/z8ksim/glue.c newlib/libc/sys/z8ksim/sys/syscall.h newlib/libc/syscalls/Makefile.am newlib/libc/syscalls/Makefile.in newlib/libc/syscalls/sysclose.c newlib/libc/syscalls/sysexecve.c newlib/libc/syscalls/sysfcntl.c newlib/libc/syscalls/sysfork.c newlib/libc/syscalls/sysfstat.c newlib/libc/syscalls/sysgetpid.c newlib/libc/syscalls/sysgettod.c newlib/libc/syscalls/sysisatty.c newlib/libc/syscalls/syskill.c newlib/libc/syscalls/syslink.c newlib/libc/syscalls/syslseek.c newlib/libc/syscalls/sysopen.c newlib/libc/syscalls/sysread.c newlib/libc/syscalls/syssbrk.c newlib/libc/syscalls/sysstat.c newlib/libc/syscalls/systimes.c newlib/libc/syscalls/sysunlink.c newlib/libc/syscalls/syswait.c newlib/libc/syscalls/syswrite.c newlib/libc/time/Makefile.am newlib/libc/time/Makefile.in newlib/libc/time/asctime.c newlib/libc/time/asctime_r.c newlib/libc/time/clock.c newlib/libc/time/ctime.c newlib/libc/time/ctime_r.c newlib/libc/time/difftime.c newlib/libc/time/gettzinfo.c newlib/libc/time/gmtime.c newlib/libc/time/gmtime_r.c newlib/libc/time/lcltime.c newlib/libc/time/lcltime_r.c newlib/libc/time/local.h newlib/libc/time/mktime.c newlib/libc/time/mktm_r.c newlib/libc/time/strftime.c newlib/libc/time/strptime.c newlib/libc/time/time.c newlib/libc/time/time.tex newlib/libc/time/tzlock.c newlib/libc/time/tzset.c newlib/libc/time/tzset_r.c newlib/libc/time/tzvars.c newlib/libc/time/wcsftime.c newlib/libc/unix/Makefile.am newlib/libc/unix/Makefile.in newlib/libc/unix/basename.c newlib/libc/unix/dirname.c newlib/libc/unix/getcwd.c newlib/libc/unix/getlogin.c newlib/libc/unix/getpass.c newlib/libc/unix/getpwent.c newlib/libc/unix/getut.c newlib/libc/unix/pread.c newlib/libc/unix/pwrite.c newlib/libc/unix/sigset.c newlib/libc/unix/ttyname.c newlib/libc/unix/ttyname.h newlib/libc/unix/ttyname_r.c newlib/libm/Makefile.am newlib/libm/Makefile.in newlib/libm/aclocal.m4 newlib/libm/common/Makefile.am newlib/libm/common/Makefile.in newlib/libm/common/acoshl.c newlib/libm/common/acosl.c newlib/libm/common/asinhl.c newlib/libm/common/asinl.c newlib/libm/common/atan2l.c newlib/libm/common/atanhl.c newlib/libm/common/atanl.c newlib/libm/common/cbrtl.c newlib/libm/common/ceill.c newlib/libm/common/copysignl.c newlib/libm/common/coshl.c newlib/libm/common/cosl.c newlib/libm/common/erfcl.c newlib/libm/common/erfl.c newlib/libm/common/exp2l.c newlib/libm/common/expl.c newlib/libm/common/expm1l.c newlib/libm/common/fabsl.c newlib/libm/common/fdiml.c newlib/libm/common/fdlibm.h newlib/libm/common/floorl.c newlib/libm/common/fmal.c newlib/libm/common/fmaxl.c newlib/libm/common/fminl.c newlib/libm/common/fmodl.c newlib/libm/common/frexpl.c newlib/libm/common/hypotl.c newlib/libm/common/ilogbl.c newlib/libm/common/isgreater.c newlib/libm/common/ldexpl.c newlib/libm/common/lgammal.c newlib/libm/common/llrintl.c newlib/libm/common/llroundl.c newlib/libm/common/local.h newlib/libm/common/log10l.c newlib/libm/common/log1pl.c newlib/libm/common/logl.c newlib/libm/common/lrintl.c newlib/libm/common/lroundl.c newlib/libm/common/modfl.c newlib/libm/common/nanl.c newlib/libm/common/nearbyintl.c newlib/libm/common/nextafterl.c newlib/libm/common/powl.c newlib/libm/common/remainderl.c newlib/libm/common/remquol.c newlib/libm/common/rintl.c newlib/libm/common/roundl.c newlib/libm/common/s_cbrt.c newlib/libm/common/s_copysign.c newlib/libm/common/s_exp10.c newlib/libm/common/s_expm1.c newlib/libm/common/s_fdim.c newlib/libm/common/s_finite.c newlib/libm/common/s_fma.c newlib/libm/common/s_fmax.c newlib/libm/common/s_fmin.c newlib/libm/common/s_fpclassify.c newlib/libm/common/s_ilogb.c newlib/libm/common/s_infconst.c newlib/libm/common/s_infinity.c newlib/libm/common/s_isinf.c newlib/libm/common/s_isinfd.c newlib/libm/common/s_isnan.c newlib/libm/common/s_isnand.c newlib/libm/common/s_lib_ver.c newlib/libm/common/s_llrint.c newlib/libm/common/s_llround.c newlib/libm/common/s_log1p.c newlib/libm/common/s_log2.c newlib/libm/common/s_logb.c newlib/libm/common/s_lrint.c newlib/libm/common/s_lround.c newlib/libm/common/s_matherr.c newlib/libm/common/s_modf.c newlib/libm/common/s_nan.c newlib/libm/common/s_nearbyint.c newlib/libm/common/s_nextafter.c newlib/libm/common/s_pow10.c newlib/libm/common/s_remquo.c newlib/libm/common/s_rint.c newlib/libm/common/s_round.c newlib/libm/common/s_scalbln.c newlib/libm/common/s_scalbn.c newlib/libm/common/s_signbit.c newlib/libm/common/s_trunc.c newlib/libm/common/scalblnl.c newlib/libm/common/scalbnl.c newlib/libm/common/sf_cbrt.c newlib/libm/common/sf_copysign.c newlib/libm/common/sf_exp10.c newlib/libm/common/sf_expm1.c newlib/libm/common/sf_fdim.c newlib/libm/common/sf_finite.c newlib/libm/common/sf_fma.c newlib/libm/common/sf_fmax.c newlib/libm/common/sf_fmin.c newlib/libm/common/sf_fpclassify.c newlib/libm/common/sf_ilogb.c newlib/libm/common/sf_infinity.c newlib/libm/common/sf_isinf.c newlib/libm/common/sf_isinff.c newlib/libm/common/sf_isnan.c newlib/libm/common/sf_isnanf.c newlib/libm/common/sf_llrint.c newlib/libm/common/sf_llround.c newlib/libm/common/sf_log1p.c newlib/libm/common/sf_log2.c newlib/libm/common/sf_logb.c newlib/libm/common/sf_lrint.c newlib/libm/common/sf_lround.c newlib/libm/common/sf_modf.c newlib/libm/common/sf_nan.c newlib/libm/common/sf_nearbyint.c newlib/libm/common/sf_nextafter.c newlib/libm/common/sf_pow10.c newlib/libm/common/sf_remquo.c newlib/libm/common/sf_rint.c newlib/libm/common/sf_round.c newlib/libm/common/sf_scalbln.c newlib/libm/common/sf_scalbn.c newlib/libm/common/sf_trunc.c newlib/libm/common/sinhl.c newlib/libm/common/sinl.c newlib/libm/common/sqrtl.c newlib/libm/common/tanhl.c newlib/libm/common/tanl.c newlib/libm/common/tgammal.c newlib/libm/common/truncl.c newlib/libm/config.h.in newlib/libm/configure newlib/libm/configure.in newlib/libm/libm.texinfo newlib/libm/machine/Makefile.am newlib/libm/machine/Makefile.in newlib/libm/machine/aclocal.m4 newlib/libm/machine/configure newlib/libm/machine/configure.in newlib/libm/machine/i386/Makefile.am newlib/libm/machine/i386/Makefile.in newlib/libm/machine/i386/aclocal.m4 newlib/libm/machine/i386/configure newlib/libm/machine/i386/configure.in newlib/libm/machine/i386/f_atan2.S newlib/libm/machine/i386/f_atan2f.S newlib/libm/machine/i386/f_exp.c newlib/libm/machine/i386/f_expf.c newlib/libm/machine/i386/f_frexp.S newlib/libm/machine/i386/f_frexpf.S newlib/libm/machine/i386/f_ldexp.S newlib/libm/machine/i386/f_ldexpf.S newlib/libm/machine/i386/f_llrint.c newlib/libm/machine/i386/f_llrintf.c newlib/libm/machine/i386/f_llrintl.c newlib/libm/machine/i386/f_log.S newlib/libm/machine/i386/f_log10.S newlib/libm/machine/i386/f_log10f.S newlib/libm/machine/i386/f_logf.S newlib/libm/machine/i386/f_lrint.c newlib/libm/machine/i386/f_lrintf.c newlib/libm/machine/i386/f_lrintl.c newlib/libm/machine/i386/f_math.h newlib/libm/machine/i386/f_pow.c newlib/libm/machine/i386/f_powf.c newlib/libm/machine/i386/f_rint.c newlib/libm/machine/i386/f_rintf.c newlib/libm/machine/i386/f_rintl.c newlib/libm/machine/i386/f_tan.S newlib/libm/machine/i386/f_tanf.S newlib/libm/machine/i386/i386mach.h newlib/libm/machine/spu/Makefile.am newlib/libm/machine/spu/Makefile.in newlib/libm/machine/spu/aclocal.m4 newlib/libm/machine/spu/configure newlib/libm/machine/spu/configure.in newlib/libm/machine/spu/fe_dfl_env.c newlib/libm/machine/spu/feclearexcept.c newlib/libm/machine/spu/fegetenv.c newlib/libm/machine/spu/fegetexceptflag.c newlib/libm/machine/spu/fegetround.c newlib/libm/machine/spu/feholdexcept.c newlib/libm/machine/spu/feraiseexcept.c newlib/libm/machine/spu/fesetenv.c newlib/libm/machine/spu/fesetexceptflag.c newlib/libm/machine/spu/fesetround.c newlib/libm/machine/spu/fetestexcept.c newlib/libm/machine/spu/feupdateenv.c newlib/libm/machine/spu/headers/acos.h newlib/libm/machine/spu/headers/acosd2.h newlib/libm/machine/spu/headers/acosf.h newlib/libm/machine/spu/headers/acosf4.h newlib/libm/machine/spu/headers/acosh.h newlib/libm/machine/spu/headers/acoshd2.h newlib/libm/machine/spu/headers/acoshf.h newlib/libm/machine/spu/headers/acoshf4.h newlib/libm/machine/spu/headers/asin.h newlib/libm/machine/spu/headers/asind2.h newlib/libm/machine/spu/headers/asinf.h newlib/libm/machine/spu/headers/asinf4.h newlib/libm/machine/spu/headers/asinh.h newlib/libm/machine/spu/headers/asinhd2.h newlib/libm/machine/spu/headers/asinhf.h newlib/libm/machine/spu/headers/asinhf4.h newlib/libm/machine/spu/headers/atan.h newlib/libm/machine/spu/headers/atan2.h newlib/libm/machine/spu/headers/atan2d2.h newlib/libm/machine/spu/headers/atan2f.h newlib/libm/machine/spu/headers/atan2f4.h newlib/libm/machine/spu/headers/atand2.h newlib/libm/machine/spu/headers/atanf.h newlib/libm/machine/spu/headers/atanf4.h newlib/libm/machine/spu/headers/atanh.h newlib/libm/machine/spu/headers/atanhd2.h newlib/libm/machine/spu/headers/atanhf.h newlib/libm/machine/spu/headers/atanhf4.h newlib/libm/machine/spu/headers/cbrt.h newlib/libm/machine/spu/headers/cbrtf.h newlib/libm/machine/spu/headers/ceil.h newlib/libm/machine/spu/headers/ceilf.h newlib/libm/machine/spu/headers/copysign.h newlib/libm/machine/spu/headers/copysignf.h newlib/libm/machine/spu/headers/cos.h newlib/libm/machine/spu/headers/cos_sin.h newlib/libm/machine/spu/headers/cosd2.h newlib/libm/machine/spu/headers/cosf.h newlib/libm/machine/spu/headers/cosf4.h newlib/libm/machine/spu/headers/cosh.h newlib/libm/machine/spu/headers/coshd2.h newlib/libm/machine/spu/headers/coshf.h newlib/libm/machine/spu/headers/coshf4.h newlib/libm/machine/spu/headers/divd2.h newlib/libm/machine/spu/headers/divf4.h newlib/libm/machine/spu/headers/dom_chkd_less_than.h newlib/libm/machine/spu/headers/dom_chkd_negone_one.h newlib/libm/machine/spu/headers/dom_chkf_less_than.h newlib/libm/machine/spu/headers/dom_chkf_negone_one.h newlib/libm/machine/spu/headers/erf.h newlib/libm/machine/spu/headers/erf_utils.h newlib/libm/machine/spu/headers/erfc.h newlib/libm/machine/spu/headers/erfcd2.h newlib/libm/machine/spu/headers/erfcf.h newlib/libm/machine/spu/headers/erfcf4.h newlib/libm/machine/spu/headers/erfd2.h newlib/libm/machine/spu/headers/erff.h newlib/libm/machine/spu/headers/erff4.h newlib/libm/machine/spu/headers/exp.h newlib/libm/machine/spu/headers/exp2.h newlib/libm/machine/spu/headers/exp2d2.h newlib/libm/machine/spu/headers/exp2f.h newlib/libm/machine/spu/headers/exp2f4.h newlib/libm/machine/spu/headers/expd2.h newlib/libm/machine/spu/headers/expf.h newlib/libm/machine/spu/headers/expf4.h newlib/libm/machine/spu/headers/expm1.h newlib/libm/machine/spu/headers/expm1d2.h newlib/libm/machine/spu/headers/expm1f.h newlib/libm/machine/spu/headers/expm1f4.h newlib/libm/machine/spu/headers/fabs.h newlib/libm/machine/spu/headers/fabsf.h newlib/libm/machine/spu/headers/fdim.h newlib/libm/machine/spu/headers/fdimf.h newlib/libm/machine/spu/headers/feclearexcept.h newlib/libm/machine/spu/headers/fefpscr.h newlib/libm/machine/spu/headers/fegetenv.h newlib/libm/machine/spu/headers/fegetexceptflag.h newlib/libm/machine/spu/headers/fegetround.h newlib/libm/machine/spu/headers/feholdexcept.h newlib/libm/machine/spu/headers/feraiseexcept.h newlib/libm/machine/spu/headers/fesetenv.h newlib/libm/machine/spu/headers/fesetexceptflag.h newlib/libm/machine/spu/headers/fesetround.h newlib/libm/machine/spu/headers/fetestexcept.h newlib/libm/machine/spu/headers/feupdateenv.h newlib/libm/machine/spu/headers/floor.h newlib/libm/machine/spu/headers/floord2.h newlib/libm/machine/spu/headers/floorf.h newlib/libm/machine/spu/headers/floorf4.h newlib/libm/machine/spu/headers/fma.h newlib/libm/machine/spu/headers/fmaf.h newlib/libm/machine/spu/headers/fmax.h newlib/libm/machine/spu/headers/fmaxf.h newlib/libm/machine/spu/headers/fmin.h newlib/libm/machine/spu/headers/fminf.h newlib/libm/machine/spu/headers/fmod.h newlib/libm/machine/spu/headers/fmodf.h newlib/libm/machine/spu/headers/frexp.h newlib/libm/machine/spu/headers/frexpf.h newlib/libm/machine/spu/headers/hypot.h newlib/libm/machine/spu/headers/hypotd2.h newlib/libm/machine/spu/headers/hypotf.h newlib/libm/machine/spu/headers/hypotf4.h newlib/libm/machine/spu/headers/ilogb.h newlib/libm/machine/spu/headers/ilogbf.h newlib/libm/machine/spu/headers/isnan.h newlib/libm/machine/spu/headers/isnand2.h newlib/libm/machine/spu/headers/isnanf.h newlib/libm/machine/spu/headers/isnanf4.h newlib/libm/machine/spu/headers/ldexp.h newlib/libm/machine/spu/headers/ldexpd2.h newlib/libm/machine/spu/headers/ldexpf.h newlib/libm/machine/spu/headers/ldexpf4.h newlib/libm/machine/spu/headers/lgamma.h newlib/libm/machine/spu/headers/lgammad2.h newlib/libm/machine/spu/headers/lgammaf.h newlib/libm/machine/spu/headers/lgammaf4.h newlib/libm/machine/spu/headers/llrint.h newlib/libm/machine/spu/headers/llrintf.h newlib/libm/machine/spu/headers/llround.h newlib/libm/machine/spu/headers/llroundf.h newlib/libm/machine/spu/headers/log.h newlib/libm/machine/spu/headers/log10.h newlib/libm/machine/spu/headers/log10d2.h newlib/libm/machine/spu/headers/log10f.h newlib/libm/machine/spu/headers/log1p.h newlib/libm/machine/spu/headers/log1pd2.h newlib/libm/machine/spu/headers/log1pf.h newlib/libm/machine/spu/headers/log1pf4.h newlib/libm/machine/spu/headers/log2.h newlib/libm/machine/spu/headers/log2d2.h newlib/libm/machine/spu/headers/log2f.h newlib/libm/machine/spu/headers/log2f4.h newlib/libm/machine/spu/headers/logbf.h newlib/libm/machine/spu/headers/logbf4.h newlib/libm/machine/spu/headers/logd2.h newlib/libm/machine/spu/headers/logf.h newlib/libm/machine/spu/headers/logf4.h newlib/libm/machine/spu/headers/lrint.h newlib/libm/machine/spu/headers/lrintf.h newlib/libm/machine/spu/headers/lround.h newlib/libm/machine/spu/headers/lroundf.h newlib/libm/machine/spu/headers/nearbyint.h newlib/libm/machine/spu/headers/nearbyintf.h newlib/libm/machine/spu/headers/nearbyintf4.h newlib/libm/machine/spu/headers/nextafter.h newlib/libm/machine/spu/headers/nextafterd2.h newlib/libm/machine/spu/headers/nextafterf.h newlib/libm/machine/spu/headers/nextafterf4.h newlib/libm/machine/spu/headers/pow.h newlib/libm/machine/spu/headers/powd2.h newlib/libm/machine/spu/headers/powf.h newlib/libm/machine/spu/headers/powf4.h newlib/libm/machine/spu/headers/recipd2.h newlib/libm/machine/spu/headers/recipf4.h newlib/libm/machine/spu/headers/remainder.h newlib/libm/machine/spu/headers/remainderf.h newlib/libm/machine/spu/headers/remquo.h newlib/libm/machine/spu/headers/remquof.h newlib/libm/machine/spu/headers/rint.h newlib/libm/machine/spu/headers/rintf.h newlib/libm/machine/spu/headers/rintf4.h newlib/libm/machine/spu/headers/round.h newlib/libm/machine/spu/headers/roundf.h newlib/libm/machine/spu/headers/scalbn.h newlib/libm/machine/spu/headers/scalbnf.h newlib/libm/machine/spu/headers/scalbnf4.h newlib/libm/machine/spu/headers/signbit.h newlib/libm/machine/spu/headers/signbitd2.h newlib/libm/machine/spu/headers/simdmath.h newlib/libm/machine/spu/headers/sin.h newlib/libm/machine/spu/headers/sincos.h newlib/libm/machine/spu/headers/sincosd2.h newlib/libm/machine/spu/headers/sincosf.h newlib/libm/machine/spu/headers/sincosf4.h newlib/libm/machine/spu/headers/sind2.h newlib/libm/machine/spu/headers/sinf.h newlib/libm/machine/spu/headers/sinf4.h newlib/libm/machine/spu/headers/sinh.h newlib/libm/machine/spu/headers/sinhd2.h newlib/libm/machine/spu/headers/sinhf.h newlib/libm/machine/spu/headers/sinhf4.h newlib/libm/machine/spu/headers/sqrt.h newlib/libm/machine/spu/headers/sqrtd2.h newlib/libm/machine/spu/headers/sqrtf.h newlib/libm/machine/spu/headers/sqrtf4.h newlib/libm/machine/spu/headers/tan.h newlib/libm/machine/spu/headers/tand2.h newlib/libm/machine/spu/headers/tanf.h newlib/libm/machine/spu/headers/tanf4.h newlib/libm/machine/spu/headers/tanh.h newlib/libm/machine/spu/headers/tanhd2.h newlib/libm/machine/spu/headers/tanhf.h newlib/libm/machine/spu/headers/tanhf4.h newlib/libm/machine/spu/headers/tgamma.h newlib/libm/machine/spu/headers/tgammad2.h newlib/libm/machine/spu/headers/tgammaf.h newlib/libm/machine/spu/headers/tgammaf4.h newlib/libm/machine/spu/headers/trunc.h newlib/libm/machine/spu/headers/truncd2.h newlib/libm/machine/spu/headers/truncf.h newlib/libm/machine/spu/headers/truncf4.h newlib/libm/machine/spu/headers/vec_literal.h newlib/libm/machine/spu/llrint.c newlib/libm/machine/spu/llrintf.c newlib/libm/machine/spu/llround.c newlib/libm/machine/spu/llroundf.c newlib/libm/machine/spu/log2.c newlib/libm/machine/spu/log2f.c newlib/libm/machine/spu/s_asinh.c newlib/libm/machine/spu/s_atan.c newlib/libm/machine/spu/s_cbrt.c newlib/libm/machine/spu/s_ceil.c newlib/libm/machine/spu/s_copysign.c newlib/libm/machine/spu/s_cos.c newlib/libm/machine/spu/s_erf.c newlib/libm/machine/spu/s_expm1.c newlib/libm/machine/spu/s_fabs.c newlib/libm/machine/spu/s_fdim.c newlib/libm/machine/spu/s_floor.c newlib/libm/machine/spu/s_fma.c newlib/libm/machine/spu/s_fmax.c newlib/libm/machine/spu/s_fmin.c newlib/libm/machine/spu/s_frexp.c newlib/libm/machine/spu/s_ilogb.c newlib/libm/machine/spu/s_isnan.c newlib/libm/machine/spu/s_ldexp.c newlib/libm/machine/spu/s_log1p.c newlib/libm/machine/spu/s_lrint.c newlib/libm/machine/spu/s_lround.c newlib/libm/machine/spu/s_nearbyint.c newlib/libm/machine/spu/s_nextafter.c newlib/libm/machine/spu/s_remquo.c newlib/libm/machine/spu/s_rint.c newlib/libm/machine/spu/s_round.c newlib/libm/machine/spu/s_scalbn.c newlib/libm/machine/spu/s_sin.c newlib/libm/machine/spu/s_tan.c newlib/libm/machine/spu/s_tanh.c newlib/libm/machine/spu/s_trunc.c newlib/libm/machine/spu/sf_asinh.c newlib/libm/machine/spu/sf_atan.c newlib/libm/machine/spu/sf_cbrt.c newlib/libm/machine/spu/sf_ceil.c newlib/libm/machine/spu/sf_copysign.c newlib/libm/machine/spu/sf_cos.c newlib/libm/machine/spu/sf_erf.c newlib/libm/machine/spu/sf_expm1.c newlib/libm/machine/spu/sf_fabs.c newlib/libm/machine/spu/sf_fdim.c newlib/libm/machine/spu/sf_finite.c newlib/libm/machine/spu/sf_floor.c newlib/libm/machine/spu/sf_fma.c newlib/libm/machine/spu/sf_fmax.c newlib/libm/machine/spu/sf_fmin.c newlib/libm/machine/spu/sf_fpclassify.c newlib/libm/machine/spu/sf_frexp.c newlib/libm/machine/spu/sf_ilogb.c newlib/libm/machine/spu/sf_isinf.c newlib/libm/machine/spu/sf_isinff.c newlib/libm/machine/spu/sf_isnan.c newlib/libm/machine/spu/sf_isnanf.c newlib/libm/machine/spu/sf_ldexp.c newlib/libm/machine/spu/sf_log1p.c newlib/libm/machine/spu/sf_logb.c newlib/libm/machine/spu/sf_lrint.c newlib/libm/machine/spu/sf_lround.c newlib/libm/machine/spu/sf_nan.c newlib/libm/machine/spu/sf_nearbyint.c newlib/libm/machine/spu/sf_nextafter.c newlib/libm/machine/spu/sf_remquo.c newlib/libm/machine/spu/sf_rint.c newlib/libm/machine/spu/sf_round.c newlib/libm/machine/spu/sf_scalbn.c newlib/libm/machine/spu/sf_sin.c newlib/libm/machine/spu/sf_tan.c newlib/libm/machine/spu/sf_tanh.c newlib/libm/machine/spu/sf_trunc.c newlib/libm/machine/spu/w_acos.c newlib/libm/machine/spu/w_acosh.c newlib/libm/machine/spu/w_asin.c newlib/libm/machine/spu/w_atan2.c newlib/libm/machine/spu/w_atanh.c newlib/libm/machine/spu/w_cosh.c newlib/libm/machine/spu/w_exp.c newlib/libm/machine/spu/w_exp2.c newlib/libm/machine/spu/w_fmod.c newlib/libm/machine/spu/w_hypot.c newlib/libm/machine/spu/w_lgamma.c newlib/libm/machine/spu/w_log.c newlib/libm/machine/spu/w_log10.c newlib/libm/machine/spu/w_pow.c newlib/libm/machine/spu/w_remainder.c newlib/libm/machine/spu/w_sincos.c newlib/libm/machine/spu/w_sinh.c newlib/libm/machine/spu/w_sqrt.c newlib/libm/machine/spu/w_tgamma.c newlib/libm/machine/spu/wf_acos.c newlib/libm/machine/spu/wf_acosh.c newlib/libm/machine/spu/wf_asin.c newlib/libm/machine/spu/wf_atan2.c newlib/libm/machine/spu/wf_atanh.c newlib/libm/machine/spu/wf_cosh.c newlib/libm/machine/spu/wf_exp.c newlib/libm/machine/spu/wf_exp2.c newlib/libm/machine/spu/wf_fmod.c newlib/libm/machine/spu/wf_hypot.c newlib/libm/machine/spu/wf_lgamma.c newlib/libm/machine/spu/wf_log.c newlib/libm/machine/spu/wf_log10.c newlib/libm/machine/spu/wf_pow.c newlib/libm/machine/spu/wf_remainder.c newlib/libm/machine/spu/wf_sincos.c newlib/libm/machine/spu/wf_sinh.c newlib/libm/machine/spu/wf_sqrt.c newlib/libm/machine/spu/wf_tgamma.c newlib/libm/math/Makefile.am newlib/libm/math/Makefile.in newlib/libm/math/e_acos.c newlib/libm/math/e_acosh.c newlib/libm/math/e_asin.c newlib/libm/math/e_atan2.c newlib/libm/math/e_atanh.c newlib/libm/math/e_cosh.c newlib/libm/math/e_exp.c newlib/libm/math/e_fmod.c newlib/libm/math/e_hypot.c newlib/libm/math/e_j0.c newlib/libm/math/e_j1.c newlib/libm/math/e_jn.c newlib/libm/math/e_log.c newlib/libm/math/e_log10.c newlib/libm/math/e_pow.c newlib/libm/math/e_rem_pio2.c newlib/libm/math/e_remainder.c newlib/libm/math/e_scalb.c newlib/libm/math/e_sinh.c newlib/libm/math/e_sqrt.c newlib/libm/math/ef_acos.c newlib/libm/math/ef_acosh.c newlib/libm/math/ef_asin.c newlib/libm/math/ef_atan2.c newlib/libm/math/ef_atanh.c newlib/libm/math/ef_cosh.c newlib/libm/math/ef_exp.c newlib/libm/math/ef_fmod.c newlib/libm/math/ef_hypot.c newlib/libm/math/ef_j0.c newlib/libm/math/ef_j1.c newlib/libm/math/ef_jn.c newlib/libm/math/ef_log.c newlib/libm/math/ef_log10.c newlib/libm/math/ef_pow.c newlib/libm/math/ef_rem_pio2.c newlib/libm/math/ef_remainder.c newlib/libm/math/ef_scalb.c newlib/libm/math/ef_sinh.c newlib/libm/math/ef_sqrt.c newlib/libm/math/er_gamma.c newlib/libm/math/er_lgamma.c newlib/libm/math/erf_gamma.c newlib/libm/math/erf_lgamma.c newlib/libm/math/k_cos.c newlib/libm/math/k_rem_pio2.c newlib/libm/math/k_sin.c newlib/libm/math/k_standard.c newlib/libm/math/k_tan.c newlib/libm/math/kf_cos.c newlib/libm/math/kf_rem_pio2.c newlib/libm/math/kf_sin.c newlib/libm/math/kf_tan.c newlib/libm/math/math.tex newlib/libm/math/s_asinh.c newlib/libm/math/s_atan.c newlib/libm/math/s_ceil.c newlib/libm/math/s_cos.c newlib/libm/math/s_erf.c newlib/libm/math/s_fabs.c newlib/libm/math/s_floor.c newlib/libm/math/s_frexp.c newlib/libm/math/s_ldexp.c newlib/libm/math/s_signif.c newlib/libm/math/s_sin.c newlib/libm/math/s_tan.c newlib/libm/math/s_tanh.c newlib/libm/math/sf_asinh.c newlib/libm/math/sf_atan.c newlib/libm/math/sf_ceil.c newlib/libm/math/sf_cos.c newlib/libm/math/sf_erf.c newlib/libm/math/sf_fabs.c newlib/libm/math/sf_floor.c newlib/libm/math/sf_frexp.c newlib/libm/math/sf_ldexp.c newlib/libm/math/sf_signif.c newlib/libm/math/sf_sin.c newlib/libm/math/sf_tan.c newlib/libm/math/sf_tanh.c newlib/libm/math/w_acos.c newlib/libm/math/w_acosh.c newlib/libm/math/w_asin.c newlib/libm/math/w_atan2.c newlib/libm/math/w_atanh.c newlib/libm/math/w_cabs.c newlib/libm/math/w_cosh.c newlib/libm/math/w_drem.c newlib/libm/math/w_exp.c newlib/libm/math/w_exp2.c newlib/libm/math/w_fmod.c newlib/libm/math/w_gamma.c newlib/libm/math/w_hypot.c newlib/libm/math/w_j0.c newlib/libm/math/w_j1.c newlib/libm/math/w_jn.c newlib/libm/math/w_lgamma.c newlib/libm/math/w_log.c newlib/libm/math/w_log10.c newlib/libm/math/w_pow.c newlib/libm/math/w_remainder.c newlib/libm/math/w_scalb.c newlib/libm/math/w_sincos.c newlib/libm/math/w_sinh.c newlib/libm/math/w_sqrt.c newlib/libm/math/w_tgamma.c newlib/libm/math/wf_acos.c newlib/libm/math/wf_acosh.c newlib/libm/math/wf_asin.c newlib/libm/math/wf_atan2.c newlib/libm/math/wf_atanh.c newlib/libm/math/wf_cabs.c newlib/libm/math/wf_cosh.c newlib/libm/math/wf_drem.c newlib/libm/math/wf_exp.c newlib/libm/math/wf_exp2.c newlib/libm/math/wf_fmod.c newlib/libm/math/wf_gamma.c newlib/libm/math/wf_hypot.c newlib/libm/math/wf_j0.c newlib/libm/math/wf_j1.c newlib/libm/math/wf_jn.c newlib/libm/math/wf_lgamma.c newlib/libm/math/wf_log.c newlib/libm/math/wf_log10.c newlib/libm/math/wf_pow.c newlib/libm/math/wf_remainder.c newlib/libm/math/wf_scalb.c newlib/libm/math/wf_sincos.c newlib/libm/math/wf_sinh.c newlib/libm/math/wf_sqrt.c newlib/libm/math/wf_tgamma.c newlib/libm/math/wr_gamma.c newlib/libm/math/wr_lgamma.c newlib/libm/math/wrf_gamma.c newlib/libm/math/wrf_lgamma.c newlib/libm/mathfp/Makefile.am newlib/libm/mathfp/Makefile.in newlib/libm/mathfp/e_acosh.c newlib/libm/mathfp/e_atanh.c newlib/libm/mathfp/e_hypot.c newlib/libm/mathfp/e_j0.c newlib/libm/mathfp/e_j1.c newlib/libm/mathfp/e_remainder.c newlib/libm/mathfp/e_scalb.c newlib/libm/mathfp/ef_acosh.c newlib/libm/mathfp/ef_atanh.c newlib/libm/mathfp/ef_hypot.c newlib/libm/mathfp/ef_j0.c newlib/libm/mathfp/ef_j1.c newlib/libm/mathfp/ef_remainder.c newlib/libm/mathfp/ef_scalb.c newlib/libm/mathfp/er_gamma.c newlib/libm/mathfp/er_lgamma.c newlib/libm/mathfp/erf_gamma.c newlib/libm/mathfp/erf_lgamma.c newlib/libm/mathfp/mathfp.tex newlib/libm/mathfp/s_acos.c newlib/libm/mathfp/s_asin.c newlib/libm/mathfp/s_asine.c newlib/libm/mathfp/s_asinh.c newlib/libm/mathfp/s_atan.c newlib/libm/mathfp/s_atan2.c newlib/libm/mathfp/s_atangent.c newlib/libm/mathfp/s_ceil.c newlib/libm/mathfp/s_cos.c newlib/libm/mathfp/s_cosh.c newlib/libm/mathfp/s_erf.c newlib/libm/mathfp/s_exp.c newlib/libm/mathfp/s_exp2.c newlib/libm/mathfp/s_fabs.c newlib/libm/mathfp/s_floor.c newlib/libm/mathfp/s_fmod.c newlib/libm/mathfp/s_frexp.c newlib/libm/mathfp/s_ispos.c newlib/libm/mathfp/s_ldexp.c newlib/libm/mathfp/s_log.c newlib/libm/mathfp/s_log10.c newlib/libm/mathfp/s_logarithm.c newlib/libm/mathfp/s_mathcnst.c newlib/libm/mathfp/s_numtest.c newlib/libm/mathfp/s_pow.c newlib/libm/mathfp/s_signif.c newlib/libm/mathfp/s_sin.c newlib/libm/mathfp/s_sincos.c newlib/libm/mathfp/s_sine.c newlib/libm/mathfp/s_sineh.c newlib/libm/mathfp/s_sinf.c newlib/libm/mathfp/s_sinh.c newlib/libm/mathfp/s_sqrt.c newlib/libm/mathfp/s_tan.c newlib/libm/mathfp/s_tanh.c newlib/libm/mathfp/s_tgamma.c newlib/libm/mathfp/sf_acos.c newlib/libm/mathfp/sf_asin.c newlib/libm/mathfp/sf_asine.c newlib/libm/mathfp/sf_asinh.c newlib/libm/mathfp/sf_atan.c newlib/libm/mathfp/sf_atan2.c newlib/libm/mathfp/sf_atangent.c newlib/libm/mathfp/sf_ceil.c newlib/libm/mathfp/sf_cos.c newlib/libm/mathfp/sf_cosh.c newlib/libm/mathfp/sf_erf.c newlib/libm/mathfp/sf_exp.c newlib/libm/mathfp/sf_exp2.c newlib/libm/mathfp/sf_fabs.c newlib/libm/mathfp/sf_floor.c newlib/libm/mathfp/sf_fmod.c newlib/libm/mathfp/sf_frexp.c newlib/libm/mathfp/sf_ispos.c newlib/libm/mathfp/sf_ldexp.c newlib/libm/mathfp/sf_log.c newlib/libm/mathfp/sf_log10.c newlib/libm/mathfp/sf_logarithm.c newlib/libm/mathfp/sf_numtest.c newlib/libm/mathfp/sf_pow.c newlib/libm/mathfp/sf_signif.c newlib/libm/mathfp/sf_sin.c newlib/libm/mathfp/sf_sincos.c newlib/libm/mathfp/sf_sine.c newlib/libm/mathfp/sf_sineh.c newlib/libm/mathfp/sf_sinh.c newlib/libm/mathfp/sf_sqrt.c newlib/libm/mathfp/sf_tan.c newlib/libm/mathfp/sf_tanh.c newlib/libm/mathfp/sf_tgamma.c newlib/libm/mathfp/w_cabs.c newlib/libm/mathfp/w_drem.c newlib/libm/mathfp/w_jn.c newlib/libm/mathfp/wf_cabs.c newlib/libm/mathfp/wf_drem.c newlib/libm/mathfp/wf_jn.c newlib/libm/mathfp/zmath.h newlib/libm/test/Makefile.in newlib/libm/test/acos_vec.c newlib/libm/test/acosf_vec.c newlib/libm/test/acosh_vec.c newlib/libm/test/acoshf_vec.c newlib/libm/test/asin_vec.c newlib/libm/test/asinf_vec.c newlib/libm/test/asinh_vec.c newlib/libm/test/asinhf_vec.c newlib/libm/test/atan2_vec.c newlib/libm/test/atan2f_vec.c newlib/libm/test/atan_vec.c newlib/libm/test/atanf_vec.c newlib/libm/test/atanh_vec.c newlib/libm/test/atanhf_vec.c newlib/libm/test/ceil_vec.c newlib/libm/test/ceilf_vec.c newlib/libm/test/conv_vec.c newlib/libm/test/convert.c newlib/libm/test/cos_vec.c newlib/libm/test/cosf_vec.c newlib/libm/test/cosh_vec.c newlib/libm/test/coshf_vec.c newlib/libm/test/dcvt.c newlib/libm/test/dvec.c newlib/libm/test/erf_vec.c newlib/libm/test/erfc_vec.c newlib/libm/test/erfcf_vec.c newlib/libm/test/erff_vec.c newlib/libm/test/exp_vec.c newlib/libm/test/expf_vec.c newlib/libm/test/fabs_vec.c newlib/libm/test/fabsf_vec.c newlib/libm/test/floor_vec.c newlib/libm/test/floorf_vec.c newlib/libm/test/fmod_vec.c newlib/libm/test/fmodf_vec.c newlib/libm/test/gamma_vec.c newlib/libm/test/gammaf_vec.c newlib/libm/test/hypot_vec.c newlib/libm/test/hypotf_vec.c newlib/libm/test/iconv_vec.c newlib/libm/test/j0_vec.c newlib/libm/test/j0f_vec.c newlib/libm/test/j1_vec.c newlib/libm/test/j1f_vec.c newlib/libm/test/jn_vec.c newlib/libm/test/jnf_vec.c newlib/libm/test/log10_vec.c newlib/libm/test/log10f_vec.c newlib/libm/test/log1p_vec.c newlib/libm/test/log1pf_vec.c newlib/libm/test/log2_vec.c newlib/libm/test/log2f_vec.c newlib/libm/test/log_vec.c newlib/libm/test/logf_vec.c newlib/libm/test/math.c newlib/libm/test/math2.c newlib/libm/test/sin_vec.c newlib/libm/test/sinf_vec.c newlib/libm/test/sinh_vec.c newlib/libm/test/sinhf_vec.c newlib/libm/test/sprint_ivec.c newlib/libm/test/sprint_vec.c newlib/libm/test/sqrt_vec.c newlib/libm/test/sqrtf_vec.c newlib/libm/test/string.c newlib/libm/test/tan_vec.c newlib/libm/test/tanf_vec.c newlib/libm/test/tanh_vec.c newlib/libm/test/tanhf_vec.c newlib/libm/test/test.c newlib/libm/test/test.h newlib/libm/test/test_ieee.c newlib/libm/test/test_is.c newlib/libm/test/y0_vec.c newlib/libm/test/y0f_vec.c newlib/libm/test/y1_vec.c newlib/libm/test/y1f_vec.c newlib/libm/test/yn_vec.c newlib/libm/test/ynf_vec.c newlib/newlib.hin newlib/stamp-h.in newlib/testsuite/config/default.exp newlib/testsuite/include/check.h newlib/testsuite/lib/checkoutput.exp newlib/testsuite/lib/flags.exp newlib/testsuite/lib/newlib.exp newlib/testsuite/lib/passfail.exp newlib/testsuite/newlib.elix/elix.exp newlib/testsuite/newlib.elix/tmmap.c newlib/testsuite/newlib.iconv/iconv.exp newlib/testsuite/newlib.iconv/iconvjp.c newlib/testsuite/newlib.iconv/iconvnm.c newlib/testsuite/newlib.iconv/iconvru.c newlib/testsuite/newlib.locale/UTF-8.c newlib/testsuite/newlib.locale/UTF-8.exp newlib/testsuite/newlib.locale/locale.exp newlib/testsuite/newlib.search/hsearchtest.c newlib/testsuite/newlib.search/hsearchtest.exp newlib/testsuite/newlib.stdlib/atexit.c newlib/testsuite/newlib.stdlib/atexit.exp newlib/testsuite/newlib.stdlib/size_max.c newlib/testsuite/newlib.stdlib/stdlib.exp newlib/testsuite/newlib.string/memmove1.c newlib/testsuite/newlib.string/string.exp newlib/testsuite/newlib.string/tstring.c newlib/testsuite/newlib.wctype/tiswctype.c newlib/testsuite/newlib.wctype/twctrans.c newlib/testsuite/newlib.wctype/twctype.c newlib/testsuite/newlib.wctype/wctype.exp setup.com src-release symlink-tree texinfo/texinfo.tex winsup/COPYING winsup/CYGWIN_LICENSE winsup/ChangeLog winsup/Makefile.common winsup/Makefile.in winsup/README winsup/acinclude.m4 winsup/aclocal.m4 winsup/configure winsup/configure.in winsup/cygserver/ChangeLog winsup/cygserver/Makefile.in winsup/cygserver/README winsup/cygserver/aclocal.m4 winsup/cygserver/bsd_helper.cc winsup/cygserver/bsd_helper.h winsup/cygserver/bsd_log.cc winsup/cygserver/bsd_log.h winsup/cygserver/bsd_mutex.cc winsup/cygserver/bsd_mutex.h winsup/cygserver/client.cc winsup/cygserver/configure winsup/cygserver/configure.in winsup/cygserver/cygserver-config winsup/cygserver/cygserver.cc winsup/cygserver/cygserver.conf winsup/cygserver/msg.cc winsup/cygserver/process.cc winsup/cygserver/process.h winsup/cygserver/sem.cc winsup/cygserver/setpwd.cc winsup/cygserver/shm.cc winsup/cygserver/sysv_msg.cc winsup/cygserver/sysv_sem.cc winsup/cygserver/sysv_shm.cc winsup/cygserver/threaded_queue.cc winsup/cygserver/threaded_queue.h winsup/cygserver/transport.cc winsup/cygserver/transport.h winsup/cygserver/transport_pipes.cc winsup/cygserver/transport_pipes.h winsup/cygserver/woutsup.h winsup/doc/ChangeLog winsup/doc/Makefile.in winsup/doc/README winsup/doc/aclocal.m4 winsup/doc/configure winsup/doc/configure.in winsup/doc/cygserver.sgml winsup/doc/cygwin-api.in.sgml winsup/doc/cygwin-ug-net.in.sgml winsup/doc/cygwin-ug.in.sgml winsup/doc/cygwin.dsl winsup/doc/cygwinenv.sgml winsup/doc/dll.sgml winsup/doc/doctool.c winsup/doc/doctool.txt winsup/doc/effectively.sgml winsup/doc/faq-api.xml winsup/doc/faq-programming.xml winsup/doc/faq-resources.xml winsup/doc/faq-sections.xml winsup/doc/faq-setup.xml winsup/doc/faq-using.xml winsup/doc/faq-what.xml winsup/doc/faq.xml winsup/doc/fhandler-tut.txt winsup/doc/filemodes.sgml winsup/doc/gcc.sgml winsup/doc/gdb.sgml winsup/doc/legal.sgml winsup/doc/new-features.sgml winsup/doc/ntsec.sgml winsup/doc/overview.sgml winsup/doc/overview2.sgml winsup/doc/pathnames.sgml winsup/doc/programming.sgml winsup/doc/setup-net.sgml winsup/doc/setup.sgml winsup/doc/setup2.sgml winsup/doc/textbinary.sgml winsup/doc/using.sgml winsup/doc/windres.sgml winsup/lsaauth/ChangeLog winsup/lsaauth/Makefile.in winsup/lsaauth/aclocal.m4 winsup/lsaauth/configure winsup/lsaauth/configure.in winsup/lsaauth/cyglsa-config winsup/lsaauth/cyglsa.c winsup/lsaauth/cyglsa.din winsup/lsaauth/cyglsa64.dll winsup/lsaauth/make-64bit-version-with-visual-c.bat winsup/lsaauth/mslsa.def winsup/mingw/CONTRIBUTORS winsup/mingw/CRT_fp10.c winsup/mingw/CRT_fp8.c winsup/mingw/CRT_noglob.c winsup/mingw/CRTfmode.c winsup/mingw/CRTglob.c winsup/mingw/CRTinit.c winsup/mingw/ChangeLog winsup/mingw/DISCLAIMER winsup/mingw/Makefile.in winsup/mingw/README winsup/mingw/TODO winsup/mingw/aclocal.m4 winsup/mingw/binmode.c winsup/mingw/config.guess winsup/mingw/config.sub winsup/mingw/configure winsup/mingw/configure.in winsup/mingw/cpu_features.c winsup/mingw/cpu_features.h winsup/mingw/crt1.c winsup/mingw/crtdll.def winsup/mingw/crtmt.c winsup/mingw/crtst.c winsup/mingw/dllcrt1.c winsup/mingw/dllmain.c winsup/mingw/gccmain.c winsup/mingw/include/_mingw.h winsup/mingw/include/assert.h winsup/mingw/include/complex.h winsup/mingw/include/conio.h winsup/mingw/include/ctype.h winsup/mingw/include/dir.h winsup/mingw/include/direct.h winsup/mingw/include/dirent.h winsup/mingw/include/dos.h winsup/mingw/include/errno.h winsup/mingw/include/excpt.h winsup/mingw/include/fcntl.h winsup/mingw/include/fenv.h winsup/mingw/include/float.h winsup/mingw/include/getopt.h winsup/mingw/include/inttypes.h winsup/mingw/include/io.h winsup/mingw/include/libgen.h winsup/mingw/include/limits.h winsup/mingw/include/locale.h winsup/mingw/include/malloc.h winsup/mingw/include/math.h winsup/mingw/include/mbctype.h winsup/mingw/include/mbstring.h winsup/mingw/include/mem.h winsup/mingw/include/memory.h winsup/mingw/include/process.h winsup/mingw/include/search.h winsup/mingw/include/setjmp.h winsup/mingw/include/share.h winsup/mingw/include/signal.h winsup/mingw/include/stdint.h winsup/mingw/include/stdio.h winsup/mingw/include/stdlib.h winsup/mingw/include/string.h winsup/mingw/include/strings.h winsup/mingw/include/sys/fcntl.h winsup/mingw/include/sys/file.h winsup/mingw/include/sys/locking.h winsup/mingw/include/sys/param.h winsup/mingw/include/sys/stat.h winsup/mingw/include/sys/time.h winsup/mingw/include/sys/timeb.h winsup/mingw/include/sys/types.h winsup/mingw/include/sys/unistd.h winsup/mingw/include/sys/utime.h winsup/mingw/include/tchar.h winsup/mingw/include/time.h winsup/mingw/include/unistd.h winsup/mingw/include/utime.h winsup/mingw/include/values.h winsup/mingw/include/varargs.h winsup/mingw/include/wchar.h winsup/mingw/include/wctype.h winsup/mingw/init.c winsup/mingw/install-sh winsup/mingw/isascii.c winsup/mingw/iscsym.c winsup/mingw/iscsymf.c winsup/mingw/jamfile winsup/mingw/main.c winsup/mingw/man/dirname.man winsup/mingw/mingwex/Makefile.in winsup/mingw/mingwex/_Exit.c winsup/mingw/mingwex/aclocal.m4 winsup/mingw/mingwex/atoll.c winsup/mingw/mingwex/basename.c winsup/mingw/mingwex/btowc.c winsup/mingw/mingwex/complex/cabs.c winsup/mingw/mingwex/complex/cabsf.c winsup/mingw/mingwex/complex/cabsl.c winsup/mingw/mingwex/complex/cacos.c winsup/mingw/mingwex/complex/cacosf.c winsup/mingw/mingwex/complex/cacosh.c winsup/mingw/mingwex/complex/cacoshf.c winsup/mingw/mingwex/complex/cacoshl.c winsup/mingw/mingwex/complex/cacosl.c winsup/mingw/mingwex/complex/carg.c winsup/mingw/mingwex/complex/cargf.c winsup/mingw/mingwex/complex/cargl.c winsup/mingw/mingwex/complex/casin.c winsup/mingw/mingwex/complex/casinf.c winsup/mingw/mingwex/complex/casinh.c winsup/mingw/mingwex/complex/casinhf.c winsup/mingw/mingwex/complex/casinhl.c winsup/mingw/mingwex/complex/casinl.c winsup/mingw/mingwex/complex/catan.c winsup/mingw/mingwex/complex/catanf.c winsup/mingw/mingwex/complex/catanh.c winsup/mingw/mingwex/complex/catanhf.c winsup/mingw/mingwex/complex/catanhl.c winsup/mingw/mingwex/complex/catanl.c winsup/mingw/mingwex/complex/ccos.c winsup/mingw/mingwex/complex/ccosf.c winsup/mingw/mingwex/complex/ccosh.c winsup/mingw/mingwex/complex/ccoshf.c winsup/mingw/mingwex/complex/ccoshl.c winsup/mingw/mingwex/complex/ccosl.c winsup/mingw/mingwex/complex/cexp.c winsup/mingw/mingwex/complex/cexpf.c winsup/mingw/mingwex/complex/cexpl.c winsup/mingw/mingwex/complex/cimag.c winsup/mingw/mingwex/complex/cimagf.c winsup/mingw/mingwex/complex/cimagl.c winsup/mingw/mingwex/complex/clog.c winsup/mingw/mingwex/complex/clogf.c winsup/mingw/mingwex/complex/clogl.c winsup/mingw/mingwex/complex/cpow.c winsup/mingw/mingwex/complex/cpowf.c winsup/mingw/mingwex/complex/cpowl.c winsup/mingw/mingwex/complex/cproj.c winsup/mingw/mingwex/complex/cprojf.c winsup/mingw/mingwex/complex/cprojl.c winsup/mingw/mingwex/complex/creal.c winsup/mingw/mingwex/complex/crealf.c winsup/mingw/mingwex/complex/creall.c winsup/mingw/mingwex/complex/csin.c winsup/mingw/mingwex/complex/csinf.c winsup/mingw/mingwex/complex/csinh.c winsup/mingw/mingwex/complex/csinhf.c winsup/mingw/mingwex/complex/csinhl.c winsup/mingw/mingwex/complex/csinl.c winsup/mingw/mingwex/complex/csqrt.c winsup/mingw/mingwex/complex/csqrtf.c winsup/mingw/mingwex/complex/csqrtl.c winsup/mingw/mingwex/complex/ctan.c winsup/mingw/mingwex/complex/ctanf.c winsup/mingw/mingwex/complex/ctanh.c winsup/mingw/mingwex/complex/ctanhf.c winsup/mingw/mingwex/complex/ctanhl.c winsup/mingw/mingwex/complex/ctanl.c winsup/mingw/mingwex/configure winsup/mingw/mingwex/configure.in winsup/mingw/mingwex/dirent.c winsup/mingw/mingwex/dirname.c winsup/mingw/mingwex/feclearexcept.c winsup/mingw/mingwex/fegetenv.c winsup/mingw/mingwex/fegetexceptflag.c winsup/mingw/mingwex/fegetround.c winsup/mingw/mingwex/feholdexcept.c winsup/mingw/mingwex/feraiseexcept.c winsup/mingw/mingwex/fesetenv.c winsup/mingw/mingwex/fesetexceptflag.c winsup/mingw/mingwex/fesetround.c winsup/mingw/mingwex/fetestexcept.c winsup/mingw/mingwex/feupdateenv.c winsup/mingw/mingwex/ftruncate.c winsup/mingw/mingwex/fwide.c winsup/mingw/mingwex/gdtoa/README winsup/mingw/mingwex/gdtoa/README.mingw winsup/mingw/mingwex/gdtoa/arithchk.c winsup/mingw/mingwex/gdtoa/dmisc.c winsup/mingw/mingwex/gdtoa/dtoa.c winsup/mingw/mingwex/gdtoa/g__fmt.c winsup/mingw/mingwex/gdtoa/g_dfmt.c winsup/mingw/mingwex/gdtoa/g_ffmt.c winsup/mingw/mingwex/gdtoa/g_xfmt.c winsup/mingw/mingwex/gdtoa/gd_arith.h winsup/mingw/mingwex/gdtoa/gd_qnan.h winsup/mingw/mingwex/gdtoa/gdtoa.c winsup/mingw/mingwex/gdtoa/gdtoa.h winsup/mingw/mingwex/gdtoa/gdtoa_fltrnds.h winsup/mingw/mingwex/gdtoa/gdtoaimp.h winsup/mingw/mingwex/gdtoa/gethex.c winsup/mingw/mingwex/gdtoa/gmisc.c winsup/mingw/mingwex/gdtoa/hd_init.c winsup/mingw/mingwex/gdtoa/hexnan.c winsup/mingw/mingwex/gdtoa/misc.c winsup/mingw/mingwex/gdtoa/qnan.c winsup/mingw/mingwex/gdtoa/smisc.c winsup/mingw/mingwex/gdtoa/strtodg.c winsup/mingw/mingwex/gdtoa/strtodnrp.c winsup/mingw/mingwex/gdtoa/strtof.c winsup/mingw/mingwex/gdtoa/strtopx.c winsup/mingw/mingwex/gdtoa/sum.c winsup/mingw/mingwex/gdtoa/ulp.c winsup/mingw/mingwex/getopt.c winsup/mingw/mingwex/gettimeofday.c winsup/mingw/mingwex/imaxabs.c winsup/mingw/mingwex/imaxdiv.c winsup/mingw/mingwex/isblank.c winsup/mingw/mingwex/iswblank.c winsup/mingw/mingwex/lltoa.c winsup/mingw/mingwex/lltow.c winsup/mingw/mingwex/math/acosf.c winsup/mingw/mingwex/math/acosh.c winsup/mingw/mingwex/math/acoshf.c winsup/mingw/mingwex/math/acoshl.c winsup/mingw/mingwex/math/acosl.c winsup/mingw/mingwex/math/asinf.c winsup/mingw/mingwex/math/asinh.c winsup/mingw/mingwex/math/asinhf.c winsup/mingw/mingwex/math/asinhl.c winsup/mingw/mingwex/math/asinl.c winsup/mingw/mingwex/math/atan2f.c winsup/mingw/mingwex/math/atan2l.c winsup/mingw/mingwex/math/atanf.c winsup/mingw/mingwex/math/atanh.c winsup/mingw/mingwex/math/atanhf.c winsup/mingw/mingwex/math/atanhl.c winsup/mingw/mingwex/math/atanl.c winsup/mingw/mingwex/math/cbrt.c winsup/mingw/mingwex/math/cbrtf.c winsup/mingw/mingwex/math/cbrtl.c winsup/mingw/mingwex/math/ceilf.S winsup/mingw/mingwex/math/ceill.S winsup/mingw/mingwex/math/cephes_mconf.h winsup/mingw/mingwex/math/copysign.S winsup/mingw/mingwex/math/copysignf.S winsup/mingw/mingwex/math/copysignl.S winsup/mingw/mingwex/math/cosf.S winsup/mingw/mingwex/math/coshf.c winsup/mingw/mingwex/math/coshl.c winsup/mingw/mingwex/math/cosl.S winsup/mingw/mingwex/math/erfl.c winsup/mingw/mingwex/math/exp2.S winsup/mingw/mingwex/math/exp2f.S winsup/mingw/mingwex/math/exp2l.S winsup/mingw/mingwex/math/expf.c winsup/mingw/mingwex/math/expl.c winsup/mingw/mingwex/math/expm1.c winsup/mingw/mingwex/math/expm1f.c winsup/mingw/mingwex/math/expm1l.c winsup/mingw/mingwex/math/fabs.c winsup/mingw/mingwex/math/fabsf.c winsup/mingw/mingwex/math/fabsl.c winsup/mingw/mingwex/math/fastmath.h winsup/mingw/mingwex/math/fdim.c winsup/mingw/mingwex/math/fdimf.c winsup/mingw/mingwex/math/fdiml.c winsup/mingw/mingwex/math/floorf.S winsup/mingw/mingwex/math/floorl.S winsup/mingw/mingwex/math/fma.S winsup/mingw/mingwex/math/fmaf.S winsup/mingw/mingwex/math/fmal.c winsup/mingw/mingwex/math/fmax.c winsup/mingw/mingwex/math/fmaxf.c winsup/mingw/mingwex/math/fmaxl.c winsup/mingw/mingwex/math/fmin.c winsup/mingw/mingwex/math/fminf.c winsup/mingw/mingwex/math/fminl.c winsup/mingw/mingwex/math/fmodf.c winsup/mingw/mingwex/math/fmodl.c winsup/mingw/mingwex/math/fp_consts.c winsup/mingw/mingwex/math/fp_consts.h winsup/mingw/mingwex/math/fp_constsf.c winsup/mingw/mingwex/math/fp_constsl.c winsup/mingw/mingwex/math/fpclassify.c winsup/mingw/mingwex/math/fpclassifyf.c winsup/mingw/mingwex/math/fpclassifyl.c winsup/mingw/mingwex/math/frexpf.c winsup/mingw/mingwex/math/frexpl.S winsup/mingw/mingwex/math/fucom.c winsup/mingw/mingwex/math/hypotf.c winsup/mingw/mingwex/math/hypotl.c winsup/mingw/mingwex/math/ilogb.S winsup/mingw/mingwex/math/ilogbf.S winsup/mingw/mingwex/math/ilogbl.S winsup/mingw/mingwex/math/isnan.c winsup/mingw/mingwex/math/isnanf.c winsup/mingw/mingwex/math/isnanl.c winsup/mingw/mingwex/math/ldexpf.c winsup/mingw/mingwex/math/ldexpl.c winsup/mingw/mingwex/math/lgamma.c winsup/mingw/mingwex/math/lgammaf.c winsup/mingw/mingwex/math/lgammal.c winsup/mingw/mingwex/math/llrint.c winsup/mingw/mingwex/math/llrintf.c winsup/mingw/mingwex/math/llrintl.c winsup/mingw/mingwex/math/log10f.S winsup/mingw/mingwex/math/log10l.S winsup/mingw/mingwex/math/log1p.S winsup/mingw/mingwex/math/log1pf.S winsup/mingw/mingwex/math/log1pl.S winsup/mingw/mingwex/math/log2.S winsup/mingw/mingwex/math/log2f.S winsup/mingw/mingwex/math/log2l.S winsup/mingw/mingwex/math/logb.c winsup/mingw/mingwex/math/logbf.c winsup/mingw/mingwex/math/logbl.c winsup/mingw/mingwex/math/logf.S winsup/mingw/mingwex/math/logl.S winsup/mingw/mingwex/math/lrint.c winsup/mingw/mingwex/math/lrintf.c winsup/mingw/mingwex/math/lrintl.c winsup/mingw/mingwex/math/lround_generic.c winsup/mingw/mingwex/math/modff.c winsup/mingw/mingwex/math/modfl.c winsup/mingw/mingwex/math/nearbyint.S winsup/mingw/mingwex/math/nearbyintf.S winsup/mingw/mingwex/math/nearbyintl.S winsup/mingw/mingwex/math/nextafterf.c winsup/mingw/mingwex/math/nextafterl.c winsup/mingw/mingwex/math/nexttoward.c winsup/mingw/mingwex/math/nexttowardf.c winsup/mingw/mingwex/math/pow.c winsup/mingw/mingwex/math/powf.c winsup/mingw/mingwex/math/powi.c winsup/mingw/mingwex/math/powif.c winsup/mingw/mingwex/math/powil.c winsup/mingw/mingwex/math/powl.c winsup/mingw/mingwex/math/remainder.S winsup/mingw/mingwex/math/remainderf.S winsup/mingw/mingwex/math/remainderl.S winsup/mingw/mingwex/math/remquo.S winsup/mingw/mingwex/math/remquof.S winsup/mingw/mingwex/math/remquol.S winsup/mingw/mingwex/math/rint.c winsup/mingw/mingwex/math/rintf.c winsup/mingw/mingwex/math/rintl.c winsup/mingw/mingwex/math/round_generic.c winsup/mingw/mingwex/math/round_internal.h winsup/mingw/mingwex/math/s_erf.c winsup/mingw/mingwex/math/scalbn.S winsup/mingw/mingwex/math/scalbnf.S winsup/mingw/mingwex/math/scalbnl.S winsup/mingw/mingwex/math/sf_erf.c winsup/mingw/mingwex/math/signbit.c winsup/mingw/mingwex/math/signbitf.c winsup/mingw/mingwex/math/signbitl.c winsup/mingw/mingwex/math/sinf.S winsup/mingw/mingwex/math/sinhf.c winsup/mingw/mingwex/math/sinhl.c winsup/mingw/mingwex/math/sinl.S winsup/mingw/mingwex/math/sqrtf.c winsup/mingw/mingwex/math/sqrtl.c winsup/mingw/mingwex/math/tanf.S winsup/mingw/mingwex/math/tanhf.c winsup/mingw/mingwex/math/tanhl.c winsup/mingw/mingwex/math/tanl.S winsup/mingw/mingwex/math/tgamma.c winsup/mingw/mingwex/math/tgammaf.c winsup/mingw/mingwex/math/tgammal.c winsup/mingw/mingwex/math/trunc.c winsup/mingw/mingwex/math/truncf.c winsup/mingw/mingwex/math/truncl.c winsup/mingw/mingwex/mb_wc_common.h winsup/mingw/mingwex/mbrtowc.c winsup/mingw/mingwex/mbsinit.c winsup/mingw/mingwex/mingw-aligned-malloc.c winsup/mingw/mingwex/mingw-fseek.c winsup/mingw/mingwex/sitest.c winsup/mingw/mingwex/stdio/fopen64.c winsup/mingw/mingwex/stdio/fprintf.c winsup/mingw/mingwex/stdio/fseeko64.c winsup/mingw/mingwex/stdio/ftello64.c winsup/mingw/mingwex/stdio/lseek64.c winsup/mingw/mingwex/stdio/pformat.c winsup/mingw/mingwex/stdio/pformat.h winsup/mingw/mingwex/stdio/printf.c winsup/mingw/mingwex/stdio/snprintf.c winsup/mingw/mingwex/stdio/snwprintf.c winsup/mingw/mingwex/stdio/sprintf.c winsup/mingw/mingwex/stdio/vfprintf.c winsup/mingw/mingwex/stdio/vfscanf.c winsup/mingw/mingwex/stdio/vfwscanf.c winsup/mingw/mingwex/stdio/vprintf.c winsup/mingw/mingwex/stdio/vscanf.c winsup/mingw/mingwex/stdio/vsnprintf.c winsup/mingw/mingwex/stdio/vsnwprintf.c winsup/mingw/mingwex/stdio/vsprintf.c winsup/mingw/mingwex/stdio/vsscanf.c winsup/mingw/mingwex/stdio/vswscanf.c winsup/mingw/mingwex/stdio/vwscanf.c winsup/mingw/mingwex/strtoimax.c winsup/mingw/mingwex/strtoumax.c winsup/mingw/mingwex/tdelete.c winsup/mingw/mingwex/testwmem.c winsup/mingw/mingwex/tfind.c winsup/mingw/mingwex/tsearch.c winsup/mingw/mingwex/tst-aligned-malloc.c winsup/mingw/mingwex/twalk.c winsup/mingw/mingwex/ulltoa.c winsup/mingw/mingwex/ulltow.c winsup/mingw/mingwex/usleep.c winsup/mingw/mingwex/wcrtomb.c winsup/mingw/mingwex/wcstof.c winsup/mingw/mingwex/wcstoimax.c winsup/mingw/mingwex/wcstold.c winsup/mingw/mingwex/wcstoumax.c winsup/mingw/mingwex/wctob.c winsup/mingw/mingwex/wctrans.c winsup/mingw/mingwex/wctype.c winsup/mingw/mingwex/wdirent.c winsup/mingw/mingwex/wmemchr.c winsup/mingw/mingwex/wmemcmp.c winsup/mingw/mingwex/wmemcpy.c winsup/mingw/mingwex/wmemmove.c winsup/mingw/mingwex/wmemset.c winsup/mingw/mingwex/wtoll.c winsup/mingw/mkinstalldirs winsup/mingw/moldname.def.in winsup/mingw/msvcrt.def.in winsup/mingw/mthr.c winsup/mingw/mthr_init.c winsup/mingw/mthr_stub.c winsup/mingw/ofmt_stub.s winsup/mingw/profile/COPYING winsup/mingw/profile/CYGWIN_LICENSE winsup/mingw/profile/Makefile.in winsup/mingw/profile/aclocal.m4 winsup/mingw/profile/configure winsup/mingw/profile/configure.in winsup/mingw/profile/gcrt0.c winsup/mingw/profile/gmon.c winsup/mingw/profile/gmon.h winsup/mingw/profile/mcount.c winsup/mingw/profile/profil.c winsup/mingw/profile/profil.h winsup/mingw/profile/profile.h winsup/mingw/pseudo-reloc-list.c winsup/mingw/pseudo-reloc.c winsup/mingw/readme.txt winsup/mingw/samples/dirent/jamfile winsup/mingw/samples/dirent/test.c winsup/mingw/samples/dirent/wtest.c winsup/mingw/samples/dlltest/dll.c winsup/mingw/samples/dlltest/dll.def winsup/mingw/samples/dlltest/dll.h winsup/mingw/samples/dlltest/exe.c winsup/mingw/samples/dlltest/exe.exp winsup/mingw/samples/dlltest/expexe.c winsup/mingw/samples/dlltest/expexe.def winsup/mingw/samples/dlltest/jamfile winsup/mingw/samples/dlltest/loaddll.c winsup/mingw/samples/dlltest/loadexe.c winsup/mingw/samples/dlltest/readme.txt winsup/mingw/samples/dlltest/silly.cpp winsup/mingw/samples/dlltest/silly.def winsup/mingw/samples/dlltest/silly.exp winsup/mingw/samples/dlltest/silly.h winsup/mingw/samples/dlltest/sillydll.cpp winsup/mingw/samples/filehand/filehand.c winsup/mingw/samples/filehand/jamfile winsup/mingw/samples/filehand/junk.txt winsup/mingw/samples/fixargv/fixargv.c winsup/mingw/samples/fixargv/fixargv.h winsup/mingw/samples/fixargv/readme.txt winsup/mingw/samples/fmode/all.c winsup/mingw/samples/fmode/jamfile winsup/mingw/samples/fmode/readme.txt winsup/mingw/samples/fmode/test.c winsup/mingw/samples/fmode/test2.c winsup/mingw/samples/globbing/glob.c winsup/mingw/samples/globbing/jamfile winsup/mingw/samples/globbing/noglob.c winsup/mingw/samples/globbing/readme.txt winsup/mingw/samples/print/jamfile winsup/mingw/samples/print/prntest.c winsup/mingw/samples/seh/eh3.c winsup/mingw/samples/seh/exutil.c winsup/mingw/samples/seh/exutil.def winsup/mingw/samples/seh/exutil.h winsup/mingw/samples/seh/jamfile winsup/mingw/samples/seh/sehfix.c winsup/mingw/samples/seh/sehsub.c winsup/mingw/samples/seh/sehtest.c winsup/mingw/samples/simpledll/dll.c winsup/mingw/samples/simpledll/dll.cpp winsup/mingw/samples/simpledll/dll.def winsup/mingw/samples/simpledll/exe.c winsup/mingw/samples/simpledll/jamfile winsup/mingw/samples/simpledll/makedll.bat winsup/mingw/samples/test/jamfile winsup/mingw/samples/test/test.c winsup/mingw/samples/wintest/jamfile winsup/mingw/samples/wintest/test.c winsup/mingw/strcasecmp.c winsup/mingw/strncasecmp.c winsup/mingw/test_headers.c winsup/mingw/toascii.c winsup/mingw/txtmode.c winsup/mingw/wcscmpi.c winsup/testsuite/ChangeLog winsup/testsuite/Makefile.in winsup/testsuite/README winsup/testsuite/aclocal.m4 winsup/testsuite/config/default.exp winsup/testsuite/configure winsup/testsuite/configure.in winsup/testsuite/cygrun.c winsup/testsuite/libltp/include/dataascii.h winsup/testsuite/libltp/include/databin.h winsup/testsuite/libltp/include/file_lock.h winsup/testsuite/libltp/include/forker.h winsup/testsuite/libltp/include/open_flags.h winsup/testsuite/libltp/include/pattern.h winsup/testsuite/libltp/include/random_range.h winsup/testsuite/libltp/include/rmobj.h winsup/testsuite/libltp/include/search_path.h winsup/testsuite/libltp/include/str_to_bytes.h winsup/testsuite/libltp/include/string_to_tokens.h winsup/testsuite/libltp/include/test.h winsup/testsuite/libltp/include/tlibio.h winsup/testsuite/libltp/include/usctest.h winsup/testsuite/libltp/include/write_log.h winsup/testsuite/libltp/lib/dataascii.c winsup/testsuite/libltp/lib/databin.c winsup/testsuite/libltp/lib/datapid.c winsup/testsuite/libltp/lib/forker.c winsup/testsuite/libltp/lib/get_high_address.c winsup/testsuite/libltp/lib/libtestsuite.c winsup/testsuite/libltp/lib/open_flags.c winsup/testsuite/libltp/lib/parse_opts.c winsup/testsuite/libltp/lib/pattern.c winsup/testsuite/libltp/lib/rmobj.c winsup/testsuite/libltp/lib/search_path.c winsup/testsuite/libltp/lib/str_to_bytes.c winsup/testsuite/libltp/lib/string_to_tokens.c winsup/testsuite/libltp/lib/tst_res.c winsup/testsuite/libltp/lib/tst_sig.c winsup/testsuite/libltp/lib/tst_tmpdir.c winsup/testsuite/libltp/lib/write_log.c winsup/testsuite/winsup.api/checksignal.c winsup/testsuite/winsup.api/crlf.c winsup/testsuite/winsup.api/cygload.cc winsup/testsuite/winsup.api/cygload.exp winsup/testsuite/winsup.api/cygload.h winsup/testsuite/winsup.api/devdsp.c winsup/testsuite/winsup.api/devdsp_okay.h winsup/testsuite/winsup.api/devzero.c winsup/testsuite/winsup.api/iospeed.c winsup/testsuite/winsup.api/known_bugs.tcl winsup/testsuite/winsup.api/ltp/access01.c winsup/testsuite/winsup.api/ltp/access03.c winsup/testsuite/winsup.api/ltp/access04.c winsup/testsuite/winsup.api/ltp/access05.c winsup/testsuite/winsup.api/ltp/alarm01.c winsup/testsuite/winsup.api/ltp/alarm02.c winsup/testsuite/winsup.api/ltp/alarm03.c winsup/testsuite/winsup.api/ltp/alarm07.c winsup/testsuite/winsup.api/ltp/asyncio02.c winsup/testsuite/winsup.api/ltp/chdir02.c winsup/testsuite/winsup.api/ltp/chdir04.c winsup/testsuite/winsup.api/ltp/chmod01.c winsup/testsuite/winsup.api/ltp/chmod02.c winsup/testsuite/winsup.api/ltp/chown01.c winsup/testsuite/winsup.api/ltp/close01.c winsup/testsuite/winsup.api/ltp/close02.c winsup/testsuite/winsup.api/ltp/close08.c winsup/testsuite/winsup.api/ltp/creat01.c winsup/testsuite/winsup.api/ltp/creat03.c winsup/testsuite/winsup.api/ltp/creat09.c winsup/testsuite/winsup.api/ltp/dup01.c winsup/testsuite/winsup.api/ltp/dup02.c winsup/testsuite/winsup.api/ltp/dup03.c winsup/testsuite/winsup.api/ltp/dup04.c winsup/testsuite/winsup.api/ltp/dup05.c winsup/testsuite/winsup.api/ltp/execl01.c winsup/testsuite/winsup.api/ltp/execle01.c winsup/testsuite/winsup.api/ltp/execlp01.c winsup/testsuite/winsup.api/ltp/execv01.c winsup/testsuite/winsup.api/ltp/execve01.c winsup/testsuite/winsup.api/ltp/execvp01.c winsup/testsuite/winsup.api/ltp/exit01.c winsup/testsuite/winsup.api/ltp/exit02.c winsup/testsuite/winsup.api/ltp/fchdir01.c winsup/testsuite/winsup.api/ltp/fchdir02.c winsup/testsuite/winsup.api/ltp/fchmod01.c winsup/testsuite/winsup.api/ltp/fchown01.c winsup/testsuite/winsup.api/ltp/fcntl02.c winsup/testsuite/winsup.api/ltp/fcntl03.c winsup/testsuite/winsup.api/ltp/fcntl04.c winsup/testsuite/winsup.api/ltp/fcntl05.c winsup/testsuite/winsup.api/ltp/fcntl07.c winsup/testsuite/winsup.api/ltp/fcntl07B.c winsup/testsuite/winsup.api/ltp/fcntl08.c winsup/testsuite/winsup.api/ltp/fcntl09.c winsup/testsuite/winsup.api/ltp/fcntl10.c winsup/testsuite/winsup.api/ltp/fork01.c winsup/testsuite/winsup.api/ltp/fork02.c winsup/testsuite/winsup.api/ltp/fork03.c winsup/testsuite/winsup.api/ltp/fork04.c winsup/testsuite/winsup.api/ltp/fork06.c winsup/testsuite/winsup.api/ltp/fork07.c winsup/testsuite/winsup.api/ltp/fork09.c winsup/testsuite/winsup.api/ltp/fork10.c winsup/testsuite/winsup.api/ltp/fork11.c winsup/testsuite/winsup.api/ltp/fpathconf01.c winsup/testsuite/winsup.api/ltp/fstat01.c winsup/testsuite/winsup.api/ltp/fstat02.c winsup/testsuite/winsup.api/ltp/fstat03.c winsup/testsuite/winsup.api/ltp/fstat04.c winsup/testsuite/winsup.api/ltp/fsync01.c winsup/testsuite/winsup.api/ltp/ftruncate01.c winsup/testsuite/winsup.api/ltp/ftruncate02.c winsup/testsuite/winsup.api/ltp/ftruncate03.c winsup/testsuite/winsup.api/ltp/getegid01.c winsup/testsuite/winsup.api/ltp/geteuid01.c winsup/testsuite/winsup.api/ltp/getgid01.c winsup/testsuite/winsup.api/ltp/getgid02.c winsup/testsuite/winsup.api/ltp/getgid03.c winsup/testsuite/winsup.api/ltp/getgroups01.c winsup/testsuite/winsup.api/ltp/getgroups02.c winsup/testsuite/winsup.api/ltp/gethostid01.c winsup/testsuite/winsup.api/ltp/gethostname01.c winsup/testsuite/winsup.api/ltp/getpgid01.c winsup/testsuite/winsup.api/ltp/getpgid02.c winsup/testsuite/winsup.api/ltp/getpgrp01.c winsup/testsuite/winsup.api/ltp/getpid01.c winsup/testsuite/winsup.api/ltp/getpid02.c winsup/testsuite/winsup.api/ltp/getppid01.c winsup/testsuite/winsup.api/ltp/getppid02.c winsup/testsuite/winsup.api/ltp/getuid01.c winsup/testsuite/winsup.api/ltp/getuid02.c winsup/testsuite/winsup.api/ltp/getuid03.c winsup/testsuite/winsup.api/ltp/kill01.c winsup/testsuite/winsup.api/ltp/kill02.c winsup/testsuite/winsup.api/ltp/kill03.c winsup/testsuite/winsup.api/ltp/kill04.c winsup/testsuite/winsup.api/ltp/kill09.c winsup/testsuite/winsup.api/ltp/link02.c winsup/testsuite/winsup.api/ltp/link03.c winsup/testsuite/winsup.api/ltp/link04.c winsup/testsuite/winsup.api/ltp/link05.c winsup/testsuite/winsup.api/ltp/lseek01.c winsup/testsuite/winsup.api/ltp/lseek02.c winsup/testsuite/winsup.api/ltp/lseek03.c winsup/testsuite/winsup.api/ltp/lseek04.c winsup/testsuite/winsup.api/ltp/lseek05.c winsup/testsuite/winsup.api/ltp/lseek06.c winsup/testsuite/winsup.api/ltp/lseek07.c winsup/testsuite/winsup.api/ltp/lseek08.c winsup/testsuite/winsup.api/ltp/lseek09.c winsup/testsuite/winsup.api/ltp/lseek10.c winsup/testsuite/winsup.api/ltp/lstat02.c winsup/testsuite/winsup.api/ltp/mkdir01.c winsup/testsuite/winsup.api/ltp/mkdir08.c winsup/testsuite/winsup.api/ltp/mknod01.c winsup/testsuite/winsup.api/ltp/mmap001.c winsup/testsuite/winsup.api/ltp/mmap02.c winsup/testsuite/winsup.api/ltp/mmap03.c winsup/testsuite/winsup.api/ltp/mmap04.c winsup/testsuite/winsup.api/ltp/mmap05.c winsup/testsuite/winsup.api/ltp/mmap06.c winsup/testsuite/winsup.api/ltp/mmap07.c winsup/testsuite/winsup.api/ltp/mmap08.c winsup/testsuite/winsup.api/ltp/munmap01.c winsup/testsuite/winsup.api/ltp/munmap02.c winsup/testsuite/winsup.api/ltp/nice05.c winsup/testsuite/winsup.api/ltp/open02.c winsup/testsuite/winsup.api/ltp/open03.c winsup/testsuite/winsup.api/ltp/pathconf01.c winsup/testsuite/winsup.api/ltp/pause01.c winsup/testsuite/winsup.api/ltp/pipe01.c winsup/testsuite/winsup.api/ltp/pipe08.c winsup/testsuite/winsup.api/ltp/pipe09.c winsup/testsuite/winsup.api/ltp/pipe10.c winsup/testsuite/winsup.api/ltp/pipe11.c winsup/testsuite/winsup.api/ltp/poll01.c winsup/testsuite/winsup.api/ltp/read01.c winsup/testsuite/winsup.api/ltp/read04.c winsup/testsuite/winsup.api/ltp/readdir01.c winsup/testsuite/winsup.api/ltp/readlink01.c winsup/testsuite/winsup.api/ltp/readlink02.c winsup/testsuite/winsup.api/ltp/readlink03.c winsup/testsuite/winsup.api/ltp/rename01.c winsup/testsuite/winsup.api/ltp/rename02.c winsup/testsuite/winsup.api/ltp/rename08.c winsup/testsuite/winsup.api/ltp/rename10.c winsup/testsuite/winsup.api/ltp/rmdir01.c winsup/testsuite/winsup.api/ltp/rmdir04.c winsup/testsuite/winsup.api/ltp/rmdir05.c winsup/testsuite/winsup.api/ltp/sbrk01.c winsup/testsuite/winsup.api/ltp/select01.c winsup/testsuite/winsup.api/ltp/select02.c winsup/testsuite/winsup.api/ltp/select03.c winsup/testsuite/winsup.api/ltp/setgid01.c winsup/testsuite/winsup.api/ltp/setgroups01.c winsup/testsuite/winsup.api/ltp/setpgid01.c winsup/testsuite/winsup.api/ltp/setregid01.c winsup/testsuite/winsup.api/ltp/setreuid01.c winsup/testsuite/winsup.api/ltp/setuid01.c winsup/testsuite/winsup.api/ltp/setuid02.c winsup/testsuite/winsup.api/ltp/signal03.c winsup/testsuite/winsup.api/ltp/stat01.c winsup/testsuite/winsup.api/ltp/stat02.c winsup/testsuite/winsup.api/ltp/stat03.c winsup/testsuite/winsup.api/ltp/stat05.c winsup/testsuite/winsup.api/ltp/stat06.c winsup/testsuite/winsup.api/ltp/symlink01.c winsup/testsuite/winsup.api/ltp/symlink02.c winsup/testsuite/winsup.api/ltp/symlink03.c winsup/testsuite/winsup.api/ltp/symlink04.c winsup/testsuite/winsup.api/ltp/symlink05.c winsup/testsuite/winsup.api/ltp/sync01.c winsup/testsuite/winsup.api/ltp/sync02.c winsup/testsuite/winsup.api/ltp/time01.c winsup/testsuite/winsup.api/ltp/time02.c winsup/testsuite/winsup.api/ltp/times01.c winsup/testsuite/winsup.api/ltp/times02.c winsup/testsuite/winsup.api/ltp/times03.c winsup/testsuite/winsup.api/ltp/truncate01.c winsup/testsuite/winsup.api/ltp/truncate02.c winsup/testsuite/winsup.api/ltp/ulimit01.c winsup/testsuite/winsup.api/ltp/umask01.c winsup/testsuite/winsup.api/ltp/umask02.c winsup/testsuite/winsup.api/ltp/umask03.c winsup/testsuite/winsup.api/ltp/uname01.c winsup/testsuite/winsup.api/ltp/unlink05.c winsup/testsuite/winsup.api/ltp/unlink06.c winsup/testsuite/winsup.api/ltp/unlink07.c winsup/testsuite/winsup.api/ltp/unlink08.c winsup/testsuite/winsup.api/ltp/vfork01.c winsup/testsuite/winsup.api/ltp/wait02.c winsup/testsuite/winsup.api/ltp/wait401.c winsup/testsuite/winsup.api/ltp/wait402.c winsup/testsuite/winsup.api/ltp/write01.c winsup/testsuite/winsup.api/ltp/write02.c winsup/testsuite/winsup.api/ltp/write03.c winsup/testsuite/winsup.api/mmaptest01.c winsup/testsuite/winsup.api/mmaptest02.c winsup/testsuite/winsup.api/mmaptest03.c winsup/testsuite/winsup.api/mmaptest04.c winsup/testsuite/winsup.api/msgtest.c winsup/testsuite/winsup.api/nullgetcwd.c winsup/testsuite/winsup.api/pthread/cancel1.c winsup/testsuite/winsup.api/pthread/cancel10.c winsup/testsuite/winsup.api/pthread/cancel11.c winsup/testsuite/winsup.api/pthread/cancel12.c winsup/testsuite/winsup.api/pthread/cancel2.c winsup/testsuite/winsup.api/pthread/cancel3.c winsup/testsuite/winsup.api/pthread/cancel4.c winsup/testsuite/winsup.api/pthread/cancel5.c winsup/testsuite/winsup.api/pthread/cancel6.c winsup/testsuite/winsup.api/pthread/cancel7.c winsup/testsuite/winsup.api/pthread/cancel8.c winsup/testsuite/winsup.api/pthread/cancel9.c winsup/testsuite/winsup.api/pthread/cleanup2.c winsup/testsuite/winsup.api/pthread/cleanup3.c winsup/testsuite/winsup.api/pthread/condvar1.c winsup/testsuite/winsup.api/pthread/condvar2.c winsup/testsuite/winsup.api/pthread/condvar2_1.c winsup/testsuite/winsup.api/pthread/condvar3.c winsup/testsuite/winsup.api/pthread/condvar3_1.c winsup/testsuite/winsup.api/pthread/condvar3_2.c winsup/testsuite/winsup.api/pthread/condvar3_3.c winsup/testsuite/winsup.api/pthread/condvar4.c winsup/testsuite/winsup.api/pthread/condvar5.c winsup/testsuite/winsup.api/pthread/condvar6.c winsup/testsuite/winsup.api/pthread/condvar7.c winsup/testsuite/winsup.api/pthread/condvar8.c winsup/testsuite/winsup.api/pthread/condvar9.c winsup/testsuite/winsup.api/pthread/count1.c winsup/testsuite/winsup.api/pthread/create1.c winsup/testsuite/winsup.api/pthread/create2.c winsup/testsuite/winsup.api/pthread/equal1.c winsup/testsuite/winsup.api/pthread/exit1.c winsup/testsuite/winsup.api/pthread/exit2.c winsup/testsuite/winsup.api/pthread/exit3.c winsup/testsuite/winsup.api/pthread/inherit1.c winsup/testsuite/winsup.api/pthread/join0.c winsup/testsuite/winsup.api/pthread/join1.c winsup/testsuite/winsup.api/pthread/join2.c winsup/testsuite/winsup.api/pthread/mainthreadexits.c winsup/testsuite/winsup.api/pthread/mutex1.c winsup/testsuite/winsup.api/pthread/mutex1d.c winsup/testsuite/winsup.api/pthread/mutex1e.c winsup/testsuite/winsup.api/pthread/mutex1n.c winsup/testsuite/winsup.api/pthread/mutex1r.c winsup/testsuite/winsup.api/pthread/mutex2.c winsup/testsuite/winsup.api/pthread/mutex3.c winsup/testsuite/winsup.api/pthread/mutex4.c winsup/testsuite/winsup.api/pthread/mutex5.c winsup/testsuite/winsup.api/pthread/mutex6d.c winsup/testsuite/winsup.api/pthread/mutex6e.c winsup/testsuite/winsup.api/pthread/mutex6n.c winsup/testsuite/winsup.api/pthread/mutex6r.c winsup/testsuite/winsup.api/pthread/mutex7.c winsup/testsuite/winsup.api/pthread/mutex7d.c winsup/testsuite/winsup.api/pthread/mutex7e.c winsup/testsuite/winsup.api/pthread/mutex7n.c winsup/testsuite/winsup.api/pthread/mutex7r.c winsup/testsuite/winsup.api/pthread/mutex8e.c winsup/testsuite/winsup.api/pthread/mutex8n.c winsup/testsuite/winsup.api/pthread/mutex8r.c winsup/testsuite/winsup.api/pthread/once1.c winsup/testsuite/winsup.api/pthread/priority1.c winsup/testsuite/winsup.api/pthread/priority2.c winsup/testsuite/winsup.api/pthread/rwlock1.c winsup/testsuite/winsup.api/pthread/rwlock2.c winsup/testsuite/winsup.api/pthread/rwlock3.c winsup/testsuite/winsup.api/pthread/rwlock4.c winsup/testsuite/winsup.api/pthread/rwlock5.c winsup/testsuite/winsup.api/pthread/rwlock6.c winsup/testsuite/winsup.api/pthread/rwlock7.c winsup/testsuite/winsup.api/pthread/self1.c winsup/testsuite/winsup.api/pthread/self2.c winsup/testsuite/winsup.api/pthread/test.h winsup/testsuite/winsup.api/pthread/threadidafterfork.c winsup/testsuite/winsup.api/pthread/tsd1.c winsup/testsuite/winsup.api/resethand.c winsup/testsuite/winsup.api/samples/sample-fail.c winsup/testsuite/winsup.api/samples/sample-miscompile.c winsup/testsuite/winsup.api/samples/sample-pass.c winsup/testsuite/winsup.api/semtest.c winsup/testsuite/winsup.api/shmtest.c winsup/testsuite/winsup.api/sigchld.c winsup/testsuite/winsup.api/signal-into-win32-api.c winsup/testsuite/winsup.api/systemcall.c winsup/testsuite/winsup.api/user_malloc.c winsup/testsuite/winsup.api/waitpid.c winsup/testsuite/winsup.api/winsup.exp winsup/utils/COPYING.dumper winsup/utils/ChangeLog winsup/utils/ChangeLog-2000 winsup/utils/Makefile.in winsup/utils/aclocal.m4 winsup/utils/bloda.cc winsup/utils/configure winsup/utils/configure.in winsup/utils/cygcheck.cc winsup/utils/cygpath.cc winsup/utils/cygwin-console-helper.cc winsup/utils/dump_setup.cc winsup/utils/dumper.cc winsup/utils/dumper.h winsup/utils/getfacl.c winsup/utils/kill.cc winsup/utils/ldd.cc winsup/utils/ldh.cc winsup/utils/mingw winsup/utils/mkgroup.c winsup/utils/mkpasswd.c winsup/utils/module_info.cc winsup/utils/mount.cc winsup/utils/parse_pe.cc winsup/utils/passwd.c winsup/utils/path.cc winsup/utils/path.h winsup/utils/ps.cc winsup/utils/regtool.cc winsup/utils/setfacl.c winsup/utils/setmetamode.c winsup/utils/ssp.c winsup/utils/ssp.txt winsup/utils/strace.cc winsup/utils/testsuite.cc winsup/utils/testsuite.h winsup/utils/umount.cc winsup/utils/utils.sgml winsup/utils/wide_path.h winsup/w32api/CONTRIBUTIONS winsup/w32api/ChangeLog winsup/w32api/Makefile.in winsup/w32api/README.w32api winsup/w32api/TODO winsup/w32api/aclocal.m4 winsup/w32api/config.guess winsup/w32api/config.sub winsup/w32api/configure winsup/w32api/configure.in winsup/w32api/include/GL/gl.h winsup/w32api/include/GL/glext.h winsup/w32api/include/GL/glu.h winsup/w32api/include/accctrl.h winsup/w32api/include/aclapi.h winsup/w32api/include/aclui.h winsup/w32api/include/adsprop.h winsup/w32api/include/afxres.h winsup/w32api/include/amaudio.h winsup/w32api/include/amvideo.h winsup/w32api/include/audevcod.h winsup/w32api/include/aviriff.h winsup/w32api/include/aygshell.h winsup/w32api/include/basetsd.h winsup/w32api/include/basetyps.h winsup/w32api/include/bdatypes.h winsup/w32api/include/cderr.h winsup/w32api/include/cguid.h winsup/w32api/include/cmnquery.h winsup/w32api/include/comcat.h winsup/w32api/include/commctrl.h winsup/w32api/include/commdlg.h winsup/w32api/include/control.h winsup/w32api/include/cpl.h winsup/w32api/include/cplext.h winsup/w32api/include/custcntl.h winsup/w32api/include/dbt.h winsup/w32api/include/dde.h winsup/w32api/include/ddeml.h winsup/w32api/include/ddk/atm.h winsup/w32api/include/ddk/batclass.h winsup/w32api/include/ddk/cfg.h winsup/w32api/include/ddk/cfgmgr32.h winsup/w32api/include/ddk/d4drvif.h winsup/w32api/include/ddk/d4iface.h winsup/w32api/include/ddk/ddkmapi.h winsup/w32api/include/ddk/hidclass.h winsup/w32api/include/ddk/hidpi.h winsup/w32api/include/ddk/hidsdi.h winsup/w32api/include/ddk/hidusage.h winsup/w32api/include/ddk/kbdmou.h winsup/w32api/include/ddk/mcd.h winsup/w32api/include/ddk/miniport.h winsup/w32api/include/ddk/minitape.h winsup/w32api/include/ddk/mountdev.h winsup/w32api/include/ddk/mountmgr.h winsup/w32api/include/ddk/ndis.h winsup/w32api/include/ddk/ndisguid.h winsup/w32api/include/ddk/ndistapi.h winsup/w32api/include/ddk/ndiswan.h winsup/w32api/include/ddk/netevent.h winsup/w32api/include/ddk/netpnp.h winsup/w32api/include/ddk/newdev.h winsup/w32api/include/ddk/ntapi.h winsup/w32api/include/ddk/ntdd8042.h winsup/w32api/include/ddk/ntddbeep.h winsup/w32api/include/ddk/ntddcdrm.h winsup/w32api/include/ddk/ntddcdvd.h winsup/w32api/include/ddk/ntddchgr.h winsup/w32api/include/ddk/ntdddisk.h winsup/w32api/include/ddk/ntddk.h winsup/w32api/include/ddk/ntddkbd.h winsup/w32api/include/ddk/ntddmou.h winsup/w32api/include/ddk/ntddndis.h winsup/w32api/include/ddk/ntddpar.h winsup/w32api/include/ddk/ntddpcm.h winsup/w32api/include/ddk/ntddscsi.h winsup/w32api/include/ddk/ntddser.h winsup/w32api/include/ddk/ntddstor.h winsup/w32api/include/ddk/ntddtape.h winsup/w32api/include/ddk/ntddtdi.h winsup/w32api/include/ddk/ntddvdeo.h winsup/w32api/include/ddk/ntddvol.h winsup/w32api/include/ddk/ntifs.h winsup/w32api/include/ddk/ntpoapi.h winsup/w32api/include/ddk/ntstatus.h winsup/w32api/include/ddk/parallel.h winsup/w32api/include/ddk/pfhook.h winsup/w32api/include/ddk/poclass.h winsup/w32api/include/ddk/scsi.h winsup/w32api/include/ddk/scsiscan.h winsup/w32api/include/ddk/scsiwmi.h winsup/w32api/include/ddk/smbus.h winsup/w32api/include/ddk/srb.h winsup/w32api/include/ddk/storport.h winsup/w32api/include/ddk/tdi.h winsup/w32api/include/ddk/tdiinfo.h winsup/w32api/include/ddk/tdikrnl.h winsup/w32api/include/ddk/tdistat.h winsup/w32api/include/ddk/tvout.h winsup/w32api/include/ddk/upssvc.h winsup/w32api/include/ddk/usb.h winsup/w32api/include/ddk/usb100.h winsup/w32api/include/ddk/usbcamdi.h winsup/w32api/include/ddk/usbdi.h winsup/w32api/include/ddk/usbioctl.h winsup/w32api/include/ddk/usbiodef.h winsup/w32api/include/ddk/usbscan.h winsup/w32api/include/ddk/usbuser.h winsup/w32api/include/ddk/video.h winsup/w32api/include/ddk/videoagp.h winsup/w32api/include/ddk/win2k.h winsup/w32api/include/ddk/winddi.h winsup/w32api/include/ddk/winddk.h winsup/w32api/include/ddk/winnt4.h winsup/w32api/include/ddk/winxp.h winsup/w32api/include/ddk/ws2san.h winsup/w32api/include/ddk/xfilter.h winsup/w32api/include/devguid.h winsup/w32api/include/dhcpcsdk.h winsup/w32api/include/directx/d3d9.h winsup/w32api/include/directx/d3d9caps.h winsup/w32api/include/directx/d3d9types.h winsup/w32api/include/directx/dxerr8.h winsup/w32api/include/directx/dxerr9.h winsup/w32api/include/dlgs.h winsup/w32api/include/docobj.h winsup/w32api/include/dsadmin.h winsup/w32api/include/dsclient.h winsup/w32api/include/dsgetdc.h winsup/w32api/include/dshow.h winsup/w32api/include/dsquery.h winsup/w32api/include/dsrole.h winsup/w32api/include/dvdevcod.h winsup/w32api/include/dvdmedia.h winsup/w32api/include/edevdefs.h winsup/w32api/include/errorrep.h winsup/w32api/include/errors.h winsup/w32api/include/evcode.h winsup/w32api/include/exdisp.h winsup/w32api/include/exdispid.h winsup/w32api/include/fltdefs.h winsup/w32api/include/httpext.h winsup/w32api/include/icm.h winsup/w32api/include/idispids.h winsup/w32api/include/il21dec.h winsup/w32api/include/imagehlp.h winsup/w32api/include/imm.h winsup/w32api/include/initguid.h winsup/w32api/include/intshcut.h winsup/w32api/include/ipexport.h winsup/w32api/include/iphlpapi.h winsup/w32api/include/ipifcons.h winsup/w32api/include/ipinfoid.h winsup/w32api/include/iprtrmib.h winsup/w32api/include/iptypes.h winsup/w32api/include/ipxconst.h winsup/w32api/include/ipxrtdef.h winsup/w32api/include/ipxtfflt.h winsup/w32api/include/isguids.h winsup/w32api/include/ks.h winsup/w32api/include/ksmedia.h winsup/w32api/include/largeint.h winsup/w32api/include/lm.h winsup/w32api/include/lmaccess.h winsup/w32api/include/lmalert.h winsup/w32api/include/lmapibuf.h winsup/w32api/include/lmat.h winsup/w32api/include/lmaudit.h winsup/w32api/include/lmbrowsr.h winsup/w32api/include/lmchdev.h winsup/w32api/include/lmconfig.h winsup/w32api/include/lmcons.h winsup/w32api/include/lmerr.h winsup/w32api/include/lmerrlog.h winsup/w32api/include/lmmsg.h winsup/w32api/include/lmremutl.h winsup/w32api/include/lmrepl.h winsup/w32api/include/lmserver.h winsup/w32api/include/lmshare.h winsup/w32api/include/lmsname.h winsup/w32api/include/lmstats.h winsup/w32api/include/lmsvc.h winsup/w32api/include/lmuse.h winsup/w32api/include/lmuseflg.h winsup/w32api/include/lmwksta.h winsup/w32api/include/lzexpand.h winsup/w32api/include/mapi.h winsup/w32api/include/mciavi.h winsup/w32api/include/mcx.h winsup/w32api/include/mgm.h winsup/w32api/include/mgmtapi.h winsup/w32api/include/mlang.h winsup/w32api/include/mmreg.h winsup/w32api/include/mmsystem.h winsup/w32api/include/mpegtype.h winsup/w32api/include/mprapi.h winsup/w32api/include/mq.h winsup/w32api/include/msacm.h winsup/w32api/include/mshtml.h winsup/w32api/include/mswsock.h winsup/w32api/include/nb30.h winsup/w32api/include/nddeapi.h winsup/w32api/include/nspapi.h winsup/w32api/include/ntdef.h winsup/w32api/include/ntdll.h winsup/w32api/include/ntdsapi.h winsup/w32api/include/ntdsbcli.h winsup/w32api/include/ntldap.h winsup/w32api/include/ntsecapi.h winsup/w32api/include/ntsecpkg.h winsup/w32api/include/oaidl.h winsup/w32api/include/objbase.h winsup/w32api/include/objfwd.h winsup/w32api/include/objidl.h winsup/w32api/include/objsafe.h winsup/w32api/include/objsel.h winsup/w32api/include/ocidl.h winsup/w32api/include/odbcinst.h winsup/w32api/include/ole.h winsup/w32api/include/ole2.h winsup/w32api/include/ole2ver.h winsup/w32api/include/oleacc.h winsup/w32api/include/oleauto.h winsup/w32api/include/olectl.h winsup/w32api/include/olectlid.h winsup/w32api/include/oledlg.h winsup/w32api/include/oleidl.h winsup/w32api/include/pbt.h winsup/w32api/include/poppack.h winsup/w32api/include/powrprof.h winsup/w32api/include/prsht.h winsup/w32api/include/psapi.h winsup/w32api/include/pshpack1.h winsup/w32api/include/pshpack2.h winsup/w32api/include/pshpack4.h winsup/w32api/include/pshpack8.h winsup/w32api/include/qedit.h winsup/w32api/include/rapi.h winsup/w32api/include/ras.h winsup/w32api/include/rasdlg.h winsup/w32api/include/raserror.h winsup/w32api/include/rassapi.h winsup/w32api/include/reason.h winsup/w32api/include/regstr.h winsup/w32api/include/richedit.h winsup/w32api/include/richole.h winsup/w32api/include/routprot.h winsup/w32api/include/rpc.h winsup/w32api/include/rpcdce.h winsup/w32api/include/rpcdce2.h winsup/w32api/include/rpcdcep.h winsup/w32api/include/rpcndr.h winsup/w32api/include/rpcnsi.h winsup/w32api/include/rpcnsip.h winsup/w32api/include/rpcnterr.h winsup/w32api/include/rpcproxy.h winsup/w32api/include/rtutils.h winsup/w32api/include/schannel.h winsup/w32api/include/schnlsp.h winsup/w32api/include/scrnsave.h winsup/w32api/include/sddl.h winsup/w32api/include/secext.h winsup/w32api/include/security.h winsup/w32api/include/servprov.h winsup/w32api/include/setupapi.h winsup/w32api/include/shellapi.h winsup/w32api/include/shldisp.h winsup/w32api/include/shlguid.h winsup/w32api/include/shlobj.h winsup/w32api/include/shlwapi.h winsup/w32api/include/snmp.h winsup/w32api/include/specstrings.h winsup/w32api/include/sql.h winsup/w32api/include/sqlext.h winsup/w32api/include/sqltypes.h winsup/w32api/include/sqlucode.h winsup/w32api/include/sspi.h winsup/w32api/include/stm.h winsup/w32api/include/strmif.h winsup/w32api/include/subauth.h winsup/w32api/include/svcguid.h winsup/w32api/include/tlhelp32.h winsup/w32api/include/tmschema.h winsup/w32api/include/unknwn.h winsup/w32api/include/userenv.h winsup/w32api/include/usp10.h winsup/w32api/include/uxtheme.h winsup/w32api/include/vfw.h winsup/w32api/include/vidcap.h winsup/w32api/include/vmr9.h winsup/w32api/include/vptype.h winsup/w32api/include/w32api.h winsup/w32api/include/winable.h winsup/w32api/include/winbase.h winsup/w32api/include/winber.h winsup/w32api/include/wincon.h winsup/w32api/include/wincrypt.h winsup/w32api/include/windef.h winsup/w32api/include/windns.h winsup/w32api/include/windows.h winsup/w32api/include/windowsx.h winsup/w32api/include/winerror.h winsup/w32api/include/wingdi.h winsup/w32api/include/wininet.h winsup/w32api/include/winioctl.h winsup/w32api/include/winldap.h winsup/w32api/include/winnetwk.h winsup/w32api/include/winnls.h winsup/w32api/include/winnt.h winsup/w32api/include/winperf.h winsup/w32api/include/winreg.h winsup/w32api/include/winresrc.h winsup/w32api/include/winsnmp.h winsup/w32api/include/winsock.h winsup/w32api/include/winsock2.h winsup/w32api/include/winspool.h winsup/w32api/include/winsvc.h winsup/w32api/include/winuser.h winsup/w32api/include/winver.h winsup/w32api/include/ws2spi.h winsup/w32api/include/ws2tcpip.h winsup/w32api/include/wsahelp.h winsup/w32api/include/wsipx.h winsup/w32api/include/wsnetbs.h winsup/w32api/include/wtsapi32.h winsup/w32api/include/wtypes.h winsup/w32api/include/xprtdefs.h winsup/w32api/include/zmouse.h winsup/w32api/install-sh winsup/w32api/lib/Makefile.in winsup/w32api/lib/aclui.def winsup/w32api/lib/advapi32.def winsup/w32api/lib/ativscp-uuid.c winsup/w32api/lib/avicap32.def winsup/w32api/lib/avifil32.def winsup/w32api/lib/bthprops.def winsup/w32api/lib/cap.def winsup/w32api/lib/cguid-uuid.c winsup/w32api/lib/comcat-uuid.c winsup/w32api/lib/comctl32.def winsup/w32api/lib/comdlg32.def winsup/w32api/lib/crypt32.def winsup/w32api/lib/ctl3d32.def winsup/w32api/lib/ddk/Makefile.in winsup/w32api/lib/ddk/apcups.def winsup/w32api/lib/ddk/cfgmgr32.def winsup/w32api/lib/ddk/dxapi.def winsup/w32api/lib/ddk/hal.def winsup/w32api/lib/ddk/hid.def winsup/w32api/lib/ddk/hidparse.def winsup/w32api/lib/ddk/mcd.def winsup/w32api/lib/ddk/ndis.def winsup/w32api/lib/ddk/newdev.def winsup/w32api/lib/ddk/ntoskrnl.def winsup/w32api/lib/ddk/scsiport.def winsup/w32api/lib/ddk/tdi.def winsup/w32api/lib/ddk/usbcamd.def winsup/w32api/lib/ddk/usbcamd2.def winsup/w32api/lib/ddk/videoprt.def winsup/w32api/lib/ddk/win32k.def winsup/w32api/lib/devguid.c winsup/w32api/lib/dhcpcsvc.def winsup/w32api/lib/directx/Makefile.in winsup/w32api/lib/directx/d3d8.def winsup/w32api/lib/directx/d3d9.def winsup/w32api/lib/directx/d3dim.def winsup/w32api/lib/directx/d3drm.def winsup/w32api/lib/directx/d3dx8d.def winsup/w32api/lib/directx/d3dx9d.def winsup/w32api/lib/directx/d3dxof.def winsup/w32api/lib/directx/ddraw.def winsup/w32api/lib/directx/dinput.def winsup/w32api/lib/directx/dinput8.def winsup/w32api/lib/directx/dinput_joy.c winsup/w32api/lib/directx/dinput_joy2.c winsup/w32api/lib/directx/dinput_kbd.c winsup/w32api/lib/directx/dinput_mouse.c winsup/w32api/lib/directx/dinput_mouse2.c winsup/w32api/lib/directx/dinput_private.h winsup/w32api/lib/directx/dmoguids.c winsup/w32api/lib/directx/dplayx.def winsup/w32api/lib/directx/dpnaddr.def winsup/w32api/lib/directx/dpnet.def winsup/w32api/lib/directx/dpnlobby.def winsup/w32api/lib/directx/dpvoice.def winsup/w32api/lib/directx/dsetup.def winsup/w32api/lib/directx/dsound.def winsup/w32api/lib/directx/dxerr.c winsup/w32api/lib/directx/dxerr8.c winsup/w32api/lib/directx/dxerr8w.c winsup/w32api/lib/directx/dxerr9.c winsup/w32api/lib/directx/dxerr9w.c winsup/w32api/lib/directx/dxguid.c winsup/w32api/lib/directx/ksproxy.def winsup/w32api/lib/directx/ksuser.c winsup/w32api/lib/directx/ksuser.def winsup/w32api/lib/directx/msdmo.def winsup/w32api/lib/directx/strmiids.c winsup/w32api/lib/directx/test.c winsup/w32api/lib/dlcapi.def winsup/w32api/lib/dnsapi.def winsup/w32api/lib/docobj-uuid.c winsup/w32api/lib/exdisp-uuid.c winsup/w32api/lib/extras-uuid.c winsup/w32api/lib/faultrep.def winsup/w32api/lib/gdi32.def winsup/w32api/lib/glaux.def winsup/w32api/lib/glu32.def winsup/w32api/lib/hlguids-uuid.c winsup/w32api/lib/hlink-uuid.c winsup/w32api/lib/icmui.def winsup/w32api/lib/igmpagnt.def winsup/w32api/lib/imagehlp.def winsup/w32api/lib/imm32.def winsup/w32api/lib/iphlpapi.def winsup/w32api/lib/kernel32.def winsup/w32api/lib/largeint.c winsup/w32api/lib/lz32.def winsup/w32api/lib/mapi32.def winsup/w32api/lib/mfcuia32.def winsup/w32api/lib/mgmtapi.def winsup/w32api/lib/mlang-uuid.c winsup/w32api/lib/mpr.def winsup/w32api/lib/mprapi.def winsup/w32api/lib/mqrt.def winsup/w32api/lib/msacm32.def winsup/w32api/lib/mscms.def winsup/w32api/lib/mshtml-uuid.c winsup/w32api/lib/msimg32.def winsup/w32api/lib/msvcp60.def winsup/w32api/lib/msvfw32.def winsup/w32api/lib/mswsock.def winsup/w32api/lib/msxml-uuid.c winsup/w32api/lib/nddeapi.def winsup/w32api/lib/netapi32.def winsup/w32api/lib/ntdll.def winsup/w32api/lib/oaidl-uuid.c winsup/w32api/lib/objidl-uuid.c winsup/w32api/lib/objsafe-uuid.c winsup/w32api/lib/ocidl-uuid.c winsup/w32api/lib/odbc32.def winsup/w32api/lib/odbccp32.def winsup/w32api/lib/ole32.def winsup/w32api/lib/oleacc-uuid.c winsup/w32api/lib/oleacc.def winsup/w32api/lib/oleaut32.def winsup/w32api/lib/olecli32.def winsup/w32api/lib/olectlid-uuid.c winsup/w32api/lib/oledlg.def winsup/w32api/lib/oleidl-uuid.c winsup/w32api/lib/olepro32.def winsup/w32api/lib/olesvr32.def winsup/w32api/lib/opengl32.def winsup/w32api/lib/penwin32.def winsup/w32api/lib/pkpd32.def winsup/w32api/lib/power-uuid.c winsup/w32api/lib/powrprof.def winsup/w32api/lib/psapi.def winsup/w32api/lib/quartz.def winsup/w32api/lib/rapi.def winsup/w32api/lib/rasapi32.def winsup/w32api/lib/rasdlg.def winsup/w32api/lib/res.rc winsup/w32api/lib/rpcdce4.def winsup/w32api/lib/rpcns4.def winsup/w32api/lib/rpcrt4.def winsup/w32api/lib/rtm.def winsup/w32api/lib/rtutils.def winsup/w32api/lib/scrnsave.c winsup/w32api/lib/secur32.def winsup/w32api/lib/servprov-uuid.c winsup/w32api/lib/setupapi.def winsup/w32api/lib/shell32.c winsup/w32api/lib/shell32.def winsup/w32api/lib/shfolder.def winsup/w32api/lib/shlwapi.def winsup/w32api/lib/snmpapi.def winsup/w32api/lib/svrapi.def winsup/w32api/lib/tapi32.def winsup/w32api/lib/test.c winsup/w32api/lib/th32.def winsup/w32api/lib/thunk32.def winsup/w32api/lib/unknwn-uuid.c winsup/w32api/lib/url.def winsup/w32api/lib/urlmon-uuid.c winsup/w32api/lib/user32.def winsup/w32api/lib/userenv.def winsup/w32api/lib/usp10.def winsup/w32api/lib/uxtheme.def winsup/w32api/lib/vdmdbg.def winsup/w32api/lib/version.def winsup/w32api/lib/vfw32.mri winsup/w32api/lib/win32spl.def winsup/w32api/lib/wininet.def winsup/w32api/lib/winmm.def winsup/w32api/lib/winspool.def winsup/w32api/lib/winstrm.def winsup/w32api/lib/wldap32.def winsup/w32api/lib/wow32.def winsup/w32api/lib/ws2_32.c winsup/w32api/lib/ws2_32.def winsup/w32api/lib/wsnmp32.def winsup/w32api/lib/wsock32.def winsup/w32api/lib/wst.def winsup/w32api/lib/wtsapi32.def ylwrap
author: cvs2svn <> 2009-07-24 22:24:58 +0400
committer: cvs2svn <> 2009-07-24 22:24:58 +0400
commit: efc9ccf899dfa512653b783087f5fd5d5b67e8b9 (patch)
tree: 816ff195801b14527cef77e2c99dde2bc293036a /etc
parent: 92d816d492376876a0afee9b1a7e35efd85a94ea (diff)
19 files changed, 0 insertions, 13072 deletions
diff --git a/etc/ChangeLog b/etc/ChangeLog
deleted file mode 100644
index ce6d0f7d4..000000000
--- a/etc/ChangeLog
+++ /dev/null
@@ -1,630 +0,0 @@
-2009-02-03  Carlos O'Donell  <carlos@codesourcery.com>
-
-	* configure.in: AC_SUBST pdfdir.
-	* configure: Regenerate.
-
-2007-08-13  Nick Clifton  <nickc@redhat.com>
-
-	* standards.texi: Import 22 July 2007 version.
-	* fdl.texi: Import version 1.2.
-	* make-stds.texi: Import 2006 version.
-
-2007-04-04  Eric Christopher  <echristo@apple.com>
-
-	Move from gcc:
-	2007-04-04  Zack Weinberg  <zack@mrtock.ucsd.edu>
-
-	        * texi2pod.pl: Correct handling of @itemize with no argument.
-
-	2007-02-16  Matthias Klose  <doko@debian.org>
-
-	        * texi2pod.pl: Handle @subsubsection, ignore @anchor.
-
-	2007-02-06  Richard Sandiford  <richard@codesourcery.com>
-
-	        * texi2pod.pl: Handle @multitable.
-
-2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>
-
-	* Makefile.in: Add support for "pdf" and "install-pdf" targets.
-
-2006-12-19  Paolo Bonzini  <bonzini@gnu.org>
-
-	* configure.texi: Fix botched commit.
-
-2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>
-
-	* texi2pod.pl: Correct handling of absolute @include.
-
-2006-05-02  Daniel Jacobowitz  <dan@codesourcery.com>
-
-	* texi2pod.pl: Handle -I.
-
-2006-04-06  Carlos O'Donell  <carlos@codesourcery.com>
-
-	* Makefile.in: Add install-html target. Add htmldir,
-	docdir and datarootdir.
-	* configure.texi: Document install-html target.
-	* configure.in: AC_SUBST datarootdir, docdir, htmldir.
-	* configure: Regenerate.
-
-2006-02-27  Carlos O'Donell  <carlos@codesourcery.com>
-
-	* Makefile.in: TEXI2HTML uses makeinfo. Define
-	HTMLFILES. Add html targets.
-	* configure.texi: Use ifnottex. Add alternative
-	image format specifier as jpg.
-	* standards.texi: Use ifnottex.
-
-2005-10-21  Mark Mitchell  <mark@codesourcery.com>
-
-	* texi2pod.pl: Substitue for @value even when part of @include.
-
-2005-10-21  Bob Wilson  <bob.wilson@acm.org>
-
-	* texi2pod.pl: Import latest version from GCC.
-
-2005-05-19  Zack Weinberg  <zack@codesourcery.com>
-
-	* Makefile.in: Have 'all' depend on 'info'.
-
-2003-05-16  Kelley Cook  <kelleycook@wideopenwest.com>
-
-	* configure.texi: Use "i[3-7]86" in example.
-
-2003-01-02  H.J. Lu <hjl@gnu.org>
-
-	* Makefile.in (DESTDIR): New.
-	(install-info): Use it.
-
-2002-06-11  Nick Clifton  <nickc@cambridge.redhat.com>
-
-	Import the following patches from the FSF GCC sources:
-	2002-03-25  Zack Weinberg  <zack@codesourcery.com>
-
-	* texi2pod.pl: Handle @end ftable and @end vtable.
-
-	2001-12-12  Matthias Klose  <doko@debian.org>
-
-	* texi2pod.pl: Merge changes from binutils' texi2pod.pl. Allows
-	generation of more than one man page from one source.
-	Add '-' to set of valid chars for an identifier.
-	Let -D option accept flags of the form <flag>=<value>.
-	Use \s+ for whitespace detection in '@c man' lines.
-	Handle @set and @clear independent of $output.
-	Substitute all @value{}'s in a line.
-
-	2001-11-14  Joseph S. Myers  <jsm28@cam.ac.uk>
-
-	* texi2pod.pl: Handle @ifnottex, @iftex and @display.  Handle @var
-	in verbatim blocks specially.  Handle @unnumbered, @unnumberedsec
-	and @center.  Allow [a-z] after @enumerate.  Handle 0 and numbers
-	greater than 9 in enumerations.
-
-	2001-07-03  Joseph S. Myers  <jsm28@cam.ac.uk>
-
-	* texi2pod.pl: Handle @r inside @item.
-
-2002-02-27  Andrew Cagney  <ac131313@redhat.com>
-
-	* fdl.texi: New file.
-
-2002-02-24  Andrew Cagney  <ac131313@redhat.com>
-
-	* standards.texi: Import February 14, 2002 version.
-	* make-stds.texi: Import 2001 version.
-
-2002-01-26  Hans-Peter Nilsson  <hp@bitrange.com>
-
-	* Makefile.in (install): Depend on install-info.
-
-2001-03-25  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
-
-	* texi2pod.pl: New file (from gcc/contrib).
-
-1999-04-01  Jim Blandy  <jimb@zwingli.cygnus.com>
-
-	* add-log.el, add-log.vi: New files.
-
-1999-01-20  Angela Marie Thomas (angela@cygnus.com)
-
-	* comp-tools-verify: Remove some checks that are no longer valid.
-
-1998-12-03  Nick Clifton  <nickc@cygnus.com>
-
-	* targetdoc/fr30.texi: New document.
-
-1998-10-01  Angela Marie Thomas (angela@cygnus.com)
-
-	* comp-tools-fix, cross-tools-fix: Replace /usr/include
-	with ${FIXINCDIR}.
-
-1998-08-11  Doug Evans  <devans@canuck.cygnus.com>
-
-	* make-rel-sym-tree (version): Update calculation.
-
-1998-06-12  Ian Lance Taylor  <ian@cygnus.com>
-
-	* configure.texi: Various additions.
-	* Makefile.in (TEXI2HTML, DVIPS): New variables.
-	(standards.ps): New target.
-	(configure.dvi): Copy .tin files in as well.
-	(configure.ps, configure.html): New targets.
-	(clean): Remove configdev.jpg and configbuild.jpg.
-	* configdev.fig: New file.
-	* configdev.ein: New file (EPS version of configdev.fig).
-	* configdev.jin: New file (JPEG version of configdev.fig).
-	* configbuild.fig: New file.
-	* configbuild.ein: New file (EPS version of configbuild.fig).
-	* configbuild.jin: New file (JPEG version of configbuild.fig).
-
-1998-06-10  Ian Lance Taylor  <ian@cygnus.com>
-
-	* configure.texi: New file.
-	* configdev.tin: New file.
-	* configbuild.tin: New file.
-	* Makefile.in (MAKEINFO): Use makeinfo from texinfo directory if
-	it exists.
-	(TEXI2DVI): Likewise for texi2dvi.
-	(INFOFILES): Add configure.info.
-	(DVIFILES): Add configure.dvi.
-	(info): Only build info files if the source files exist.
-	(install-info): Only install info files if they exist.
-	(dvi): Only build DVI files if the sources files exist.
-	(configure.info): New target.
-	(configure.dvi): New target.
-	(clean): Remove configdev and configbuild derived files.
-
-	Remove obsolete documentation.
-	* intro.texi: Remove.
-	* install.texi: Remove.
-	* config-names.texi: Remove.
-	* screen1.eps: Remove.
-	* screen1.obj: Remove.
-	* screen2.eps: Remove.
-	* screen2.obj: Remove.
-	* Makefile.in: Remove references to the above.
-
-Thu May 21 14:34:51 1998  Nick Clifton  <nickc@cygnus.com>
-
-	* targetdoc/arm-interwork.texi: Add note about ignoring linker
-	warning message when using --support-old-code.
-
-Mon May 18 14:27:37 1998  Angela Marie Thomas (angela@cygnus.com)
-
-	* Install.in, comp-tools-fix, comp-tools-verify, cross-tools-fix:
-	Use $GCCvn rather than substitute everywhere.
-
-Thu May 14 14:43:10 1998  Nick Clifton  <nickc@cygnus.com>
-
-	* targetdoc/arm-interwork.texi: Document dlltool support of
-	interworking.
-
-Thu May  7 16:49:38 1998  Jason Molenda  (crash@bugshack.cygnus.com)
-
-	* Install.in: Remove references to TCL_LIBRARY, TK_LIBRARY,
-	and GDBTK_FILENAME.
-
-Wed Apr  1 17:11:44 1998  Nick Clifton  <nickc@cygnus.com>
-
-	* targetdoc/arm-interwork.texi: Document ARM/thumb interworking.
-
-Tue Mar 31 15:28:20 1998  Ian Lance Taylor  <ian@cygnus.com>
-
-	* standards.texi, make-stds.texi: Update to current FSF versions.
-	* Makefile.in (standards.info): Depend upon make-std.texi.
-
-Tue Mar 24 16:13:26 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
-
-	* configure:  Regenerate with autoconf 2.12.1 to fix shell issues
-	for NT native builds.
-
-Mon Mar  9 16:41:04 1998  Doug Evans  <devans@canuck.cygnus.com>
-
-	* make-rel-sym-tree (binprogs): Add objcopy.
-
-Tue Feb 24 18:11:58 1998  Doug Evans  <devans@canuck.cygnus.com>
-
-	* make-rel-sym-tree: as.new -> as-new, ld.new -> ld-new
-	nm.new -> nm-new.  Make symlinks to crt*.o.
-
-Fri Nov 21 12:54:58 1997  Manfred Hollstein <manfred@s-direktnet.de>
-
-	* Makefile.in: Add --no-split argument to avoid creating files
-	with names longer than 14 characters.
-
-Thu Sep 25 13:13:11 1997  Jason Molenda  (crash@pern.cygnus.com)
-
-	* intro.texi: Add closing ifset.
-
-Mon Sep  1 10:31:32 1997  Angela Marie Thomas (angela@cygnus.com)
-
-	* Install.in: Move setting HOST and TARGET to the beginning
-	of the file for editing convenience.
-
-Mon Sep  1 10:28:37 1997  Angela Marie Thomas (angela@cygnus.com)
-
-	* Install.in.: More friendly options/messages when extracting
-	from a file instead of a tape device.
-
-Tue Jun 17 15:50:23 1997  Angela Marie Thomas (angela@cygnus.com)
-
-	* Install.in: Add /usr/bsd to PATH for Irix (home of compress)
-
-Thu Jun 12 13:47:00 1997  Angela Marie Thomas (angela@cygnus.com)
-
-	* Install.in (show_exec_prefix_msg): fix quoting
-
-Wed Jun  4 15:31:43 1997  Jason Molenda  (crash@godzilla.cygnus.co.jp)
-
-	* rebuilding.texi: Removed.
-
-Sat May 24 18:02:20 1997  Angela Marie Thomas (angela@cygnus.com)
-
-	* cross-tools-fix:  Remove host check since it doesn't matter
-	for this case.
-	* Install.in (guess_system): clean up more unused hosts.
-	* Install.in, cross-tools-fix, comp-tools-fix, comp-tools-verify:
-	Hack for host check to not warn the user for certain cases.
-
-Fri May 23 23:46:10 1997  Angela Marie Thomas (angela@cygnus.com)
-
-	* subst-strings: Remove a lot of unused code
-	* Install.in: Remove reference to TAPEdflt, use variables instead of
-	string substitution when able.
-
-Fri Apr 11 17:25:52 1997  Ian Lance Taylor  <ian@cygnus.com>
-
-	* configure.in: Change file named in AC_INIT to Makefile.in.
-	* configure: Rebuild.
-
-Fri Apr 11 18:12:42 1997  Jason Molenda  (crash@godzilla.cygnus.co.jp)
-
-	* Install.in (guess_system): Back out change to INSTALLHOST to
-	call all IRIX systems "mips-sgi-irix4"
-
-	* Makefile.in: Remove references to configure.texi and cfg-paper.texi.
-
-Thu Apr 10 23:26:45 1997  Jason Molenda  (crash@godzilla.cygnus.co.jp)
-
-	* srctree.texi, emacs-relnotes.texi, cfg-paper.texi: Remove.
-	* Install.in: Remove Ultrix-specific hacks.
-	Update Cygnus phone numbers.
-	(guess_system): Remove some old systems (Ultrix, OSF1 v1 & 2,
-	m68k-HPUX, m68k SunOS, etc.)
-	(show_gnu_root_msg): Remove.
-	Removed all the remove option code.
-
-Thu Apr 10 23:23:33 1997  Jason Molenda  (crash@godzilla.cygnus.co.jp)
-
-	* configure.man, configure.texi: Remote.
-
-Mon Apr  7 18:15:00 1997  Brendan Kehoe <brendan@cygnus.com>
-
-	* Fix the version string for OSF1 4.0 to recognize either
-	V4.* or X4.*
-
-Mon Apr  7 15:34:47 1997  Ian Lance Taylor  <ian@cygnus.com>
-
-	* standards.texi, make-stds.texi: Update to current FSF versions.
-
-Tue Nov 19 15:36:14 1996  Doug Evans  <dje@canuck.cygnus.com>
-
-	* make-rel-sym-tree: New file.
-
-Wed Oct 23 00:34:07 1996  Angela Marie Thomas (angela@cygnus.com)
-
-	* Lots of patches from progressive...
- 	* Install.in: restore DDOPTS for AIX 4.x
- 	* Install.in, subst-strings: add case for DG Aviion
- 	* subst-strings: fix typo in INSTALLdir var setting
- 	* comp-tools-verify: set SHLIB_PATH for shared libs
- 	* Install.in, subst-strings:  add case for solaris2.5
- 	* Install.in: fix regression for hppa1.1 check
- 	* comp-tools-fix: set LD_LIBRARY_PATH
- 	* comp-tools-fix: If fixincludes fixes /usr/include/limits.h,
- 	install it as syslimits.h.
-
-Wed Oct 16 19:20:42 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* Install.in (guess_system): Treat powerpc-ibm-aix4.1 the same as
-	rs6000-ibm-aix4.1, since the compiler now uses common mode by
-	default.
-
-Wed Oct  2 15:39:07 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
-
-	* configure.in (AC_PROG_INSTALL): Added.
-	* Makefile.in (distclean): Remove config.cache.
-
-Wed Oct  2 14:33:58 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
-
-	* configure.in: Switch to autoconf configure.in.
-	* configure: New.
-	* Makefile.in: Use autoconf-substituted values.
-
-Tue Jun 25 18:56:08 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
-
-	* Makefile.in (datadir): Changed to $(prefix)/share.
-
-Fri Mar 29 11:38:01 1996  J.T. Conklin  (jtc@lisa.cygnus.com)
-
-	* configure.man: Changed to be recognized by catman -w on Solaris.
-
-Wed Dec  6 15:40:28 1995  Doug Evans  <dje@canuck.cygnus.com>
-
-	* comp-tools-fix (fixincludes): Define FIXPROTO_DEFINES from
-	.../install-tools/fixproto-defines.
-
-Sun Nov 12 19:31:27 1995  Jason Molenda  (crash@phydeaux.cygnus.com)
-
-	* comp-tools-verify (verify_cxx_initializers): delete argv,
-	argc declarations, add -static to compile line.
-	(verify_cxx_hello_world): delete argv, argc declarations, add
-	-static to compile line.
-
-Wed Sep 20 13:21:52 1995  Ian Lance Taylor  <ian@cygnus.com>
-
-	* Makefile.in (maintainer-clean): New target, synonym for
-	realclean.
-
-Mon Aug 28 17:25:49 1995  Jason Molenda  (crash@phydeaux.cygnus.com)
-
-	* Install.in (PATH):  add /usr/ucb to $PATH (for SunOS 4.1.x).
-
-Tue Aug 15 21:51:58 1995  Jason Molenda  (crash@phydeaux.cygnus.com)
-
-	* Install.in (guess_system): Match OSF/1 v3.x as the same as
-	v2.x--v2.x binaries are upward compatible.
-
-Tue Aug 15 21:46:54 1995  Jason Molenda  (crash@phydeaux.cygnus.com)
-
-	* Install.in (guess_system): recognize HP 9000/800 systems as the
-	same as HP 9000/700 systems.
-
-Tue Aug  8 13:11:56 1995  Brendan Kehoe  <brendan@lisa.cygnus.com>
-
-	* Install.in: For emacs, run show_emacs_alternate_msg and exit.
-	(show_emacs_alternate_msg): New message saying how emacs can't be
-	installed in an alternate prefix.
-
-Thu Jun  8 00:42:56 1995  Angela Marie Thomas  <angela@cirdan.cygnus.com>
-
-	* subst-strings: change du commands to $BINDIR/. & $SRCDIR/. just
-	in case they are symlinks.
-
-Tue Apr 18 14:23:10 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* cdk-fix: Extracted table of targets that don't need their
-	  headers fixed from gcc's configure script.
-
-	* cdk-fix, cdk-verify: Use ${HOST} instead of ||HOSTstr||
-
-	* cdk-fix, cdk-verify: New files, install script fragments used
-	  for Cygnus Developer's Kit.
-
-	* Install.in (do_mkdir): New function.
-
-	* Install.in: Added support for --with and --without options.
-	  Changed so that tape commands are not run when extracting
-	  from a file.
-	  (do_mt): Changed to take only one argument.
-
-Wed Mar 29 11:16:38 1995  Jason Molenda (crash@phydeaux.cygnus.com)
-
-	* Install.in: catch UNAME==alpha-dec-osf2.x and correct entry for
-	alpha-dec-osf1.x
-
-Fri Jan 27 12:04:29 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* subst-strings (mips-sgi-irix5): New entry in table.
-
-Thu Jan 19 12:15:44 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* Install.in: Major rewrite, bundle dependent code (for example,
-	  fixincludes for comp-tools) will be inserted into the Install
-	  script when it is generated.
-
-Tue Jan 17 16:51:32 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
-
-	* Makefile.in (Makefile): Rebuild using $(SHELL).
-
-Thu Nov  3 19:30:33 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
-
-	* Makefile.in (install-info): Depend on info.
-
-Fri Aug 19 16:16:38 1994  Jason Molenda     (crash@phydeaux.cygnus.com)
-
-	* Install.in: set $FIX_HEADER so fixproto can find fix-header.
-
-Fri May  6 16:18:58 1994  Jason Molenda     (crash@sendai.cygnus.com)
-
-	* Makefile.in (install-info): add a semicolon in the if statement.
-
-Fri Apr 29 16:56:07 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
-
-	* cfg-paper.texi: Update some outdated information.
-
-	* Makefile.in (install-info): Pass file, not directory, as last
-	arg to INSTALL_DATA.
-	(uninstall): New target.
-
-Thu Apr 28 14:42:22 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
-
-	* configure.texi: Comment out @smallbook.
-
-	* Makefile.in: Define TEXI2DVI and TEXIDIR, and use the latter.
-	Remove info files in realclean, not clean, per coding standards.
-	Remove TeX output in clean.
-
-Tue Apr 26 17:18:03 1994  Jason Molenda (crash@sendai.cygnus.com)
-
-	* Install.in:  fixincludes output is actually put in fixincludes.log,
-	but echo'ed messages claim it is fixinc.log.  This is the same
-	messages as I logged in March 4 1994, but for some reason we found
-	the change hadn't been done.  I'll have to dig through the logs
-	and find out what I really did do that day. :)
-
-Mon Apr 25 20:28:19 1994  Jason Molenda   (crash@sendai.cygnus.com)
-
-	* Install.in:  use eval to call do_mt() for Ultrix brokenness.
-
-Mon Apr 25 20:00:00 1994  Jason Molenda   (crash@sendai.cygnus.com)
-
-	* Install.in(do_mt): exit with error status 1 if # of parameters
-	!= 3.
-
-Mon Apr 25 19:42:36 1994  Jason Molenda   (crash@sendai.cygnus.com)
-
-	* Install.in:  lose TAPE_FORWARD and TAPE_REWIND, add do_mt()
-	to do all tape movement operations.  Currently untested.  Addresses
-	PR # 4886 from bull.
-
-	* Install.in: add 1994 to the copyright thing.
-
-Fri Apr 22 19:05:13 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
-
-	* standards.texi: Update from FSF.
-
-Fri Apr 22 15:46:10 1994  Jason Molenda (crash@cygnus.com)
-
-	* Install.in: Add $DDOPTS, has ``bs=124b'' for all systems except
-	AIX (some versions of AIX don't understand bs=124b.  Silly OS).
-
-Mon Apr  4 22:55:05 1994  Jason Molenda (crash@sendai.cygnus.com)
-
-	* Install.in: null out $TOOLS before adding stuff to it
-	non-destructively.
-
-Wed Mar 30 21:45:35 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
-
-	* standards.texi: Fix typo.
-
-	* configure.texi, configure.man: Document --disable-.
-
-Mon Mar 28 13:22:15 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
-
-	* standards.texi: Update from FSF.
-
-Sat Mar 26 09:21:44 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
-
-	* standards.texi, make-stds.texi: Update from FSF.
-
-Fri Mar 25 22:59:45 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
-
-	* configure.texi, configure.man: Document --enable-* options.
-
-Wed Mar 23 23:38:24 1994  Jason Molenda  (crash@sendai.cygnus.com)
-
-	* Install.in: set CPP to be gcc -E for fixincludes.
-
-Wed Mar 23 13:42:48 1994  Jason Molenda  (crash@sendai.cygnus.com)
-
-	* Install.in: set PATH to $PATH:/bin:/usr/bin so we can pick
-	up native tools even if the user doesn't have them in his
-	path.
-
-	* Install.in: ``hppa-1.1-hp-hpux'' -> ``hppa1.1-hp-hpux''.
-
-Tue Mar 15 22:09:20 1994  Jason Molenda  (crash@sendai.cygnus.com)
-
-	* Install.in: TAPE_REWIND and TAPE_FORWARD variables for Unixunaware,
-	added switch statement to detect if system is Unixunaware.
-
-Fri Mar  4 12:10:30 1994  Jason Molenda (crash@sendai.cygnus.com)
-
-	* Install.in:  fixincludes output is actually put in fixincludes.log,
-	but echo'ed messages claim it is fixinc.log.
-
-Wed Nov  3 02:58:02 1993  Jeffrey Osier  (jeffrey@thepub.cygnus.com)
-
-	* subst-strings:  output TEXBUNDLE for more install notes matching
-	* install-texi.in:  PRMS info now exists
-
-Tue Oct 26 16:57:12 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
-
-	* subst-strings: match solaris*.  Also, add default case to catch
-	  and error out for unrecognized systems.
-
-Thu Aug 19 18:21:31 1993  david d `zoo' zuhn  (zoo@rtl.cygnus.com)
-
-	* Install.in: handle the new fixproto work
-
-Mon Jul 19 12:05:41 1993  david d `zoo' zuhn  (zoo@cirdan.cygnus.com)
-
-	* Install.in: remove "MT=tctl" for AIX (not needed, and barely
-	worked anyway)
-
-Mon Jun 14 19:09:22 1993  Jeffrey Osier  (jeffrey@cygnus.com)
-
-	* subst-strings: changed HOST to recognize Solaris for install notes
-
-Thu Jun 10 16:01:25 1993  Jeffrey Osier  (jeffrey@cygnus.com)
-
-	* dos-inst.texi:  new file.
-
-Wed Jun  9 19:23:59 1993  Jeffrey Osier  (jeffrey@rtl.cygnus.com)
-
-	* install-texi.in:	added conditionals (nearly complete)
-				  cleaned up
-				  added support for other releases (not done)
-
-Wed Jun  9 15:53:58 1993  Jim Kingdon  (kingdon@cygnus.com)
-
-	* Makefile.in (install-info): Use INSTALL_DATA.
-	({dist,real}clean): Also delete Makefile and config.status.
-
-Fri Jun  4 17:09:56 1993  Jeffrey Osier  (jeffrey@cygnus.com)
-
-	* subst-strings:  added data for OS_STRING
-
-	* subst-strings:  added support for OS_STRING
-
-Thu Jun  3 00:37:01 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
-
-	* Install.in: pull COPYING and COPYING.LIB off of the tape
-
-Tue Jun  1 16:52:08 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
-
-	* subst-strings: replace RELEASE_DIR too
-
-Mon Mar 22 23:55:27 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
-
-	* Makefile.in: add installcheck target
-
-Wed Mar 17 02:21:15 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
-
-	* Install.in: fix 'source only' extraction bug where it looked for
-	the src dir under H-<host>/src instead of src; also remove stray
-	reference to EMACSHIBIN
-
-Mon Mar 15 01:25:45 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
-
-	* make-stds.texi: added 'installcheck' to the standard targets
-
-Tue Mar  9 19:48:28 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
-
-	* standards.texi: added INFO-DIR-ENTRY, updated version from the FSF
-
-Tue Feb  9 12:40:23 1993  Ian Lance Taylor  (ian@cygnus.com)
-
-	* Makefile.in (standards.info): Added -I$(srcdir) to find
-	make-stds.texi.
-
-Mon Feb  1 16:32:56 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
-
-	* standards.texi: updated to latest FSF version, which includes:
-
-	* make-stds.texi: new file
-
-Mon Nov 30 01:31:40 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
-
-	* install-texi.in, relnotes.texi, intro.texi: changed Cygnus phone
-	numbers from the old Palo Alto ones to the new Mtn. View numbers
-
-Mon Nov 16 16:50:43 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
-
-	* Makefile.in: define $(RM) to "rm -f"
-
-Sun Oct 11 16:05:48 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
-
-	* intro.texi: added INFO-DIR-ENTRY
diff --git a/etc/Makefile.in b/etc/Makefile.in
deleted file mode 100644
index 9642e076c..000000000
--- a/etc/Makefile.in
+++ /dev/null
@@ -1,238 +0,0 @@
-# 
-# Makefile.in for etc
-#
-
-DESTDIR		=
-
-prefix 		= @prefix@
-exec_prefix 	= @exec_prefix@
-
-srcdir  = @srcdir@
-VPATH	= @srcdir@
-
-bindir  = @bindir@
-libdir  = @libdir@
-tooldir = $(libdir)
-datadir = @datadir@
-
-mandir  = @mandir@
-man1dir = $(mandir)/man1
-man2dir = $(mandir)/man2
-man3dir = $(mandir)/man3
-man4dir = $(mandir)/man4
-man5dir = $(mandir)/man5
-man6dir = $(mandir)/man6
-man7dir = $(mandir)/man7
-man8dir = $(mandir)/man8
-man9dir = $(mandir)/man9
-datarootdir = @datarootdir@
-docdir = @docdir@
-infodir = @infodir@
-pdfdir = @docdir@
-htmldir = @htmldir@
-
-SHELL = /bin/sh
-
-INSTALL 	= @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_DATA    = @INSTALL_DATA@
-
-MAKEINFO = `if [ -f ../texinfo/makeinfo/makeinfo ]; \
-	then echo ../texinfo/makeinfo/makeinfo; \
-	else echo makeinfo; fi`
-TEXI2DVI = `if [ -f ../texinfo/util/texi2dvi ]; \
-	then echo ../texinfo/util/texi2dvi; \
-	else echo texi2dvi; fi`
-TEXI2PDF = `if [ -f ../texinfo/util/texi2dvi ]; \
-	then echo "../texinfo/util/texi2dvi --pdf"; \
-	else echo "texi2dvi --pdf"; fi`
-TEXI2HTML = `if [ -f ../texinfo/makeinfo/makeinfo ]; \
-	then echo "../texinfo/makeinfo/makeinfo --html"; \
-	else echo "makeinfo --html"; fi`
-
-DVIPS = dvips
-
-# Where to find texinfo.tex to format documentation with TeX.
-TEXIDIR = $(srcdir)/../texinfo
-
-#### Host, target, and site specific Makefile fragments come in here.
-###
-
-INFOFILES = standards.info configure.info
-DVIFILES = standards.dvi configure.dvi
-PDFFILES = standards.pdf configure.pdf
-HTMLFILES = standards.html configure.html
-
-all: info
-install: install-info
-
-uninstall:
-
-info:
-	for f in $(INFOFILES); do \
-	  if test -f $(srcdir)/`echo $$f | sed -e 's/.info$$/.texi/'`; then \
-	    if $(MAKE) "MAKEINFO=$(MAKEINFO)" $$f; then \
-	      true; \
-	    else \
-	      exit 1; \
-	    fi; \
-	  fi; \
-	done
-
-install-info: info
-	$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(infodir)
-	if test ! -f standards.info; then cd $(srcdir); fi; \
-	if test -f standards.info; then \
-	  for i in standards.info*; do \
-	    $(INSTALL_DATA) $$i $(DESTDIR)$(infodir)/$$i; \
-	  done; \
-	fi
-	if test ! -f configure.info; then cd $(srcdir); fi; \
-	if test -f configure.info; then \
-	  for i in configure.info*; do \
-	    $(INSTALL_DATA) $$i $(DESTDIR)$(infodir)/$$i; \
-	  done; \
-	fi
-
-html:
-	for f in $(HTMLFILES); do \
-	  if test -f $(srcdir)/`echo $$f | sed -e 's/.html$$/.texi/'`; then \
-	    if $(MAKE) "TEXI2HTML=$(TEXI2HTML)" $$f; then \
-	      true; \
-	    else \
-	      exit 1; \
-	    fi; \
-	  fi; \
-	done
-
-install-html: html
-	$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(htmldir)
-	if test ! -f standards.html; then cd $(srcdir); fi; \
-	if test -f standards.html; then \
-	  for i in standards.html*; do \
-	    $(INSTALL_DATA) $$i $(DESTDIR)$(htmldir)/$$i; \
-	  done; \
-	fi
-	if test ! -f configure.html; then cd $(srcdir); fi; \
-	if test -f configure.html; then \
-	  for i in configure.html*; do \
-	    $(INSTALL_DATA) $$i $(DESTDIR)$(htmldir)/$$i; \
-	  done; \
-	fi
-
-dvi:
-	for f in $(DVIFILES); do \
-	  if test -f $(srcdir)/`echo $$f | sed -e 's/.dvi$$/.texi/'`; then \
-	    if $(MAKE) "TEXI2DVI=$(TEXI2DVI)" $$f; then \
-	      true; \
-	    else \
-	      exit 1; \
-	    fi; \
-	  fi; \
-	done
-
-pdf:
-	for f in $(PDFFILES); do \
-	  if test -f $(srcdir)/`echo $$f | sed -e 's/.pdf$$/.texi/'`; then \
-	    if $(MAKE) "TEXI2PDF=$(TEXI2PDF)" $$f; then \
-	      true; \
-	    else \
-	      exit 1; \
-	    fi; \
-	  fi; \
-	done
-
-install-pdf: pdf
-	$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(pdfdir)/etc
-	if test ! -f standards.pdf; then cd $(srcdir); fi; \
-	if test -f standards.pdf; then \
-	  for i in standards.pdf*; do \
-	    $(INSTALL_DATA) $$i $(DESTDIR)$(pdfdir)/etc/$$i; \
-	  done; \
-	fi
-	if test ! -f configure.pdf; then cd $(srcdir); fi; \
-	if test -f configure.pdf; then \
-	  for i in configure.pdf*; do \
-	    $(INSTALL_DATA) $$i $(DESTDIR)$(pdfdir)/etc/$$i; \
-	  done; \
-	fi
-
-standards.info: $(srcdir)/standards.texi $(srcdir)/make-stds.texi
-	$(MAKEINFO) --no-split -I$(srcdir) -o standards.info $(srcdir)/standards.texi
-
-standards.html: $(srcdir)/standards.texi $(srcdir)/make-stds.texi
-	$(TEXI2HTML) --no-split -I$(srcdir) -o standards.html $(srcdir)/standards.texi
-
-standards.dvi: $(srcdir)/standards.texi
-	TEXINPUTS=$(TEXIDIR):$$TEXINPUTS $(TEXI2DVI) $(srcdir)/standards.texi
-
-standards.ps: standards.dvi
-	$(DVIPS) standards.dvi -o standards.ps
-
-standards.pdf: $(srcdir)/standards.texi
-	TEXINPUTS=$(TEXIDIR):$$TEXINPUTS $(TEXI2PDF) $(srcdir)/standards.texi
-
-# makeinfo requires images to be in the current directory.
-configure.info: $(srcdir)/configure.texi $(srcdir)/configdev.tin $(srcdir)/configbuild.tin
-	rm -f configdev.txt configbuild.txt
-	cp $(srcdir)/configdev.tin configdev.txt
-	cp $(srcdir)/configbuild.tin configbuild.txt
-	$(MAKEINFO) -I$(srcdir) -o configure.info $(srcdir)/configure.texi
-	rm -f configdev.txt configbuild.txt
-
-# texi2dvi wants both the .txt and the .eps files.
-configure.dvi: $(srcdir)/configure.texi $(srcdir)/configdev.tin $(srcdir)/configbuild.tin $(srcdir)/configdev.ein $(srcdir)/configbuild.ein
-	rm -f configdev.txt configbuild.txt
-	cp $(srcdir)/configdev.tin configdev.txt
-	cp $(srcdir)/configbuild.tin configbuild.txt
-	rm -f configdev.eps configbuild.eps
-	cp $(srcdir)/configdev.ein configdev.eps
-	cp $(srcdir)/configbuild.ein configbuild.eps
-	TEXINPUTS=$(TEXIDIR):$$TEXINPUTS $(TEXI2DVI) $(srcdir)/configure.texi
-	rm -f configdev.txt configbuild.txt
-	rm -f configdev.eps configbuild.eps
-
-# dvips requires images to be in the current directory
-configure.ps: configure.dvi $(srcdir)/configdev.ein $(srcdir)/configbuild.ein
-	rm -f configdev.eps configbuild.eps
-	cp $(srcdir)/configdev.ein configdev.eps
-	cp $(srcdir)/configbuild.ein configbuild.eps
-	$(DVIPS) configure.dvi -o configure.ps
-	rm -f configdev.eps configbuild.eps
-
-configure.pdf: $(srcdir)/configure.texi $(srcdir)/configdev.tin $(srcdir)/configbuild.tin $(srcdir)/configdev.ein $(srcdir)/configbuild.ein
-	rm -f configdev.pdf configbuild.pdf
-	epstopdf $(srcdir)/configdev.ein -outfile=configdev.pdf
-	epstopdf $(srcdir)/configbuild.ein -outfile=configbuild.pdf
-	TEXINPUTS=$(TEXIDIR):$$TEXINPUTS $(TEXI2PDF) $(srcdir)/configure.texi
-	rm -f configdev.pdf configbuild.pdf
-
-configure.html: $(srcdir)/configure.texi
-	cp $(srcdir)/configdev.jin configdev.jpg
-	cp $(srcdir)/configbuild.jin configbuild.jpg
-	$(TEXI2HTML) --no-split -I$(srcdir) -o configure.html $(srcdir)/configure.texi
-
-clean:
-	rm -f *.aux *.cp *.cps *.dvi *.fn *.fns *.ky *.kys *.log
-	rm -f *.pg *.pgs *.toc *.tp *.tps *.vr *.vrs
-	rm -f configdev.txt configbuild.txt 
-	rm -f configdev.eps configbuild.eps
-	rm -f configdev.jpg configbuild.jpg
-
-mostlyclean: clean
-
-distclean:   clean
-	rm -f Makefile config.status config.cache
-
-maintainer-clean realclean:   distclean
-	rm -f *.html*
-	rm -f *.info*
-
-Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)
-	$(SHELL) ./config.status
-
-## these last targets are for standards.texi conformance
-dist:
-check:
-installcheck:
-TAGS:
diff --git a/etc/add-log.el b/etc/add-log.el
deleted file mode 100644
index 60c88e8c9..000000000
--- a/etc/add-log.el
+++ /dev/null
@@ -1,573 +0,0 @@
-;;; ============ NOTE WELL! =============
-;;;
-;;; You only need to use this file if you're using a version of Emacs
-;;; prior to 20.1 to work on GDB.  The only difference between this
-;;; and the standard add-log.el provided with 19.34 is that it
-;;; generates dates using the terser format used by Emacs 20.  This is
-;;; the format recommended for use in GDB ChangeLogs.
-;;;
-;;; To use this code, you should create a directory `~/elisp', save the code
-;;; below in `~/elisp/add-log.el', and then put something like this in
-;;; your `~/.emacs' file, to tell Emacs where to find it:
-;;; 
-;;; (setq load-path
-;;;       (cons (expand-file-name "~/elisp")
-;;;             load-path))
-;;; 
-;;; If you want, you can also byte-compile it --- it'll run a little
-;;; faster, and use a little less memory.  (Not that those matter much for
-;;; this file.)  To do that, after you've saved the text as
-;;; ~/elisp/add-log.el, bring it up in Emacs, and type
-;;; 
-;;;     C-u M-x byte-compile-file
-;;;
-;;; --- Jim Blandy
-
-;;; add-log.el --- change log maintenance commands for Emacs
-
-;; Copyright (C) 1985, 1986, 1988, 1993, 1994 Free Software Foundation, Inc.
-
-;; Keywords: maint
-
-;; This file is part of GNU Emacs.
-
-;; GNU Emacs is free software; you can redistribute it and/or modify
-;; it under the terms of the GNU General Public License as published by
-;; the Free Software Foundation; either version 2, or (at your option)
-;; any later version.
-
-;; GNU Emacs is distributed in the hope that it will be useful,
-;; but WITHOUT ANY WARRANTY; without even the implied warranty of
-;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-;; GNU General Public License for more details.
-
-;; You should have received a copy of the GNU General Public License
-;; along with GNU Emacs; see the file COPYING.  If not, write to the
-;; Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-;; Boston, MA 02111-1307, USA.
-
-;;; Commentary:
-
-;; This facility is documented in the Emacs Manual.
-
-;;; Code:
-
-(defvar change-log-default-name nil
-  "*Name of a change log file for \\[add-change-log-entry].")
-
-(defvar add-log-current-defun-function nil
-  "\
-*If non-nil, function to guess name of current function from surrounding text.
-\\[add-change-log-entry] calls this function (if nil, `add-log-current-defun'
-instead) with no arguments.  It returns a string or nil if it cannot guess.")
-
-;;;###autoload
-(defvar add-log-full-name nil
-  "*Full name of user, for inclusion in ChangeLog daily headers.
-This defaults to the value returned by the `user-full-name' function.")
-
-;;;###autoload
-(defvar add-log-mailing-address nil
-  "*Electronic mail address of user, for inclusion in ChangeLog daily headers.
-This defaults to the value of `user-mail-address'.")
-
-(defvar change-log-font-lock-keywords
-  '(("^[SMTWF].+" . font-lock-function-name-face)	; Date line.
-    ("^\t\\* \\([^ :\n]+\\)" 1 font-lock-comment-face)	; File name.
-    ("(\\([^)\n]+\\)):" 1 font-lock-keyword-face))	; Function name.
-  "Additional expressions to highlight in Change Log mode.")
-
-(defvar change-log-mode-map nil
-  "Keymap for Change Log major mode.")
-(if change-log-mode-map
-    nil
-  (setq change-log-mode-map (make-sparse-keymap))
-  (define-key change-log-mode-map "\M-q" 'change-log-fill-paragraph))
-
-(defun change-log-name ()
-  (or change-log-default-name
-      (if (eq system-type 'vax-vms) 
-	  "$CHANGE_LOG$.TXT" 
-	(if (or (eq system-type 'ms-dos) (eq system-type 'windows-nt))
-	    "changelo"
-	  "ChangeLog"))))
-
-;;;###autoload
-(defun prompt-for-change-log-name ()
-  "Prompt for a change log name."
-  (let* ((default (change-log-name))
-	 (name (expand-file-name
-		(read-file-name (format "Log file (default %s): " default)
-				nil default))))
-    ;; Handle something that is syntactically a directory name.
-    ;; Look for ChangeLog or whatever in that directory.
-    (if (string= (file-name-nondirectory name) "")
-	(expand-file-name (file-name-nondirectory default)
-			  name)
-      ;; Handle specifying a file that is a directory.
-      (if (file-directory-p name)
-	  (expand-file-name (file-name-nondirectory default)
-			    (file-name-as-directory name))
-	name))))
-
-;;;###autoload
-(defun find-change-log (&optional file-name)
-  "Find a change log file for \\[add-change-log-entry] and return the name.
-
-Optional arg FILE-NAME specifies the file to use.
-If FILE-NAME is nil, use the value of `change-log-default-name'.
-If 'change-log-default-name' is nil, behave as though it were 'ChangeLog'
-\(or whatever we use on this operating system).
-
-If 'change-log-default-name' contains a leading directory component, then
-simply find it in the current directory.  Otherwise, search in the current 
-directory and its successive parents for a file so named.
-
-Once a file is found, `change-log-default-name' is set locally in the
-current buffer to the complete file name."
-  ;; If user specified a file name or if this buffer knows which one to use,
-  ;; just use that.
-  (or file-name
-      (setq file-name (and change-log-default-name
-			   (file-name-directory change-log-default-name)
-			   change-log-default-name))
-      (progn
-	;; Chase links in the source file
-	;; and use the change log in the dir where it points.
-	(setq file-name (or (and buffer-file-name
-				 (file-name-directory
-				  (file-chase-links buffer-file-name)))
-			    default-directory))
-	(if (file-directory-p file-name)
-	    (setq file-name (expand-file-name (change-log-name) file-name)))
-	;; Chase links before visiting the file.
-	;; This makes it easier to use a single change log file
-	;; for several related directories.
-	(setq file-name (file-chase-links file-name))
-	(setq file-name (expand-file-name file-name))
-	;; Move up in the dir hierarchy till we find a change log file.
-	(let ((file1 file-name)
-	      parent-dir)
-	  (while (and (not (or (get-file-buffer file1) (file-exists-p file1)))
-		      (progn (setq parent-dir
-				   (file-name-directory
-				    (directory-file-name
-				     (file-name-directory file1))))
-			     ;; Give up if we are already at the root dir.
-			     (not (string= (file-name-directory file1)
-					   parent-dir))))
-	    ;; Move up to the parent dir and try again.
-	    (setq file1 (expand-file-name 
-			 (file-name-nondirectory (change-log-name))
-			 parent-dir)))
-	  ;; If we found a change log in a parent, use that.
-	  (if (or (get-file-buffer file1) (file-exists-p file1))
-	      (setq file-name file1)))))
-  ;; Make a local variable in this buffer so we needn't search again.
-  (set (make-local-variable 'change-log-default-name) file-name)
-  file-name)
-
-;;;###autoload
-(defun add-change-log-entry (&optional whoami file-name other-window new-entry)
-  "Find change log file and add an entry for today.
-Optional arg (interactive prefix) non-nil means prompt for user name and site.
-Second arg is file name of change log.  If nil, uses `change-log-default-name'.
-Third arg OTHER-WINDOW non-nil means visit in other window.
-Fourth arg NEW-ENTRY non-nil means always create a new entry at the front;
-never append to an existing entry."
-  (interactive (list current-prefix-arg
-		     (prompt-for-change-log-name)))
-  (or add-log-full-name
-      (setq add-log-full-name (user-full-name)))
-  (or add-log-mailing-address
-      (setq add-log-mailing-address user-mail-address))
-  (if whoami
-      (progn
-	(setq add-log-full-name (read-input "Full name: " add-log-full-name))
-	 ;; Note that some sites have room and phone number fields in
-	 ;; full name which look silly when inserted.  Rather than do
-	 ;; anything about that here, let user give prefix argument so that
-	 ;; s/he can edit the full name field in prompter if s/he wants.
-	(setq add-log-mailing-address
-	      (read-input "Mailing address: " add-log-mailing-address))))
-  (let ((defun (funcall (or add-log-current-defun-function
-			    'add-log-current-defun)))
-	paragraph-end entry)
-
-    (setq file-name (expand-file-name (find-change-log file-name)))
-
-    ;; Set ENTRY to the file name to use in the new entry.
-    (and buffer-file-name
-	 ;; Never want to add a change log entry for the ChangeLog file itself.
-	 (not (string= buffer-file-name file-name))
-	 (setq entry (if (string-match
-			  (concat "^" (regexp-quote (file-name-directory
-						     file-name)))
-			  buffer-file-name)
-			 (substring buffer-file-name (match-end 0))
-		       (file-name-nondirectory buffer-file-name))))
-
-    (if (and other-window (not (equal file-name buffer-file-name)))
-	(find-file-other-window file-name)
-      (find-file file-name))
-    (or (eq major-mode 'change-log-mode)
-	(change-log-mode))
-    (undo-boundary)
-    (goto-char (point-min))
-    (let ((heading (format "%s  %s  <%s>"
-			   (format-time-string "%Y-%m-%d")
-			   add-log-full-name
-			   add-log-mailing-address)))
-      (if (looking-at (regexp-quote heading))
-	  (forward-line 1)
-	(insert heading "\n\n")))
-
-    ;; Search only within the first paragraph.
-    (if (looking-at "\n*[^\n* \t]")
-	(skip-chars-forward "\n")
-      (forward-paragraph 1))
-    (setq paragraph-end (point))
-    (goto-char (point-min))
-
-    ;; Now insert the new line for this entry.
-    (cond ((re-search-forward "^\\s *\\*\\s *$" paragraph-end t)
-	   ;; Put this file name into the existing empty entry.
-	   (if entry
-	       (insert entry)))
-	  ((and (not new-entry)
-		(let (case-fold-search)
-		  (re-search-forward
-		   (concat (regexp-quote (concat "* " entry))
-			   ;; Don't accept `foo.bar' when
-			   ;; looking for `foo':
-			   "\\(\\s \\|[(),:]\\)")
-		   paragraph-end t)))
-	   ;; Add to the existing entry for the same file.
-	   (re-search-forward "^\\s *$\\|^\\s \\*")
-	   (goto-char (match-beginning 0))
-	   ;; Delete excess empty lines; make just 2.
-	   (while (and (not (eobp)) (looking-at "^\\s *$"))
-	     (delete-region (point) (save-excursion (forward-line 1) (point))))
-	   (insert "\n\n")
-	   (forward-line -2)
-	   (indent-relative-maybe))
-	  (t
-	   ;; Make a new entry.
-	   (forward-line 1)
-	   (while (looking-at "\\sW")
-	     (forward-line 1))
-	   (while (and (not (eobp)) (looking-at "^\\s *$"))
-	     (delete-region (point) (save-excursion (forward-line 1) (point))))
-	   (insert "\n\n\n")
-	   (forward-line -2)
-	   (indent-to left-margin)
-	   (insert "* " (or entry ""))))
-    ;; Now insert the function name, if we have one.
-    ;; Point is at the entry for this file,
-    ;; either at the end of the line or at the first blank line.
-    (if defun
-	(progn
-	  ;; Make it easy to get rid of the function name.
-	  (undo-boundary)
-	  (insert (if (save-excursion
-			(beginning-of-line 1)
-			(looking-at "\\s *$")) 
-		      ""
-		    " ")
-		  "(" defun "): "))
-      ;; No function name, so put in a colon unless we have just a star.
-      (if (not (save-excursion
-		 (beginning-of-line 1)
-		 (looking-at "\\s *\\(\\*\\s *\\)?$")))
-	  (insert ": ")))))
-
-;;;###autoload
-(defun add-change-log-entry-other-window (&optional whoami file-name)
-  "Find change log file in other window and add an entry for today.
-Optional arg (interactive prefix) non-nil means prompt for user name and site.
-Second arg is file name of change log.  \
-If nil, uses `change-log-default-name'."
-  (interactive (if current-prefix-arg
-		   (list current-prefix-arg
-			 (prompt-for-change-log-name))))
-  (add-change-log-entry whoami file-name t))
-;;;###autoload (define-key ctl-x-4-map "a" 'add-change-log-entry-other-window)
-
-;;;###autoload
-(defun change-log-mode ()
-  "Major mode for editing change logs; like Indented Text Mode.
-Prevents numeric backups and sets `left-margin' to 8 and `fill-column' to 74.
-New log entries are usually made with \\[add-change-log-entry] or \\[add-change-log-entry-other-window].
-Each entry behaves as a paragraph, and the entries for one day as a page.
-Runs `change-log-mode-hook'."
-  (interactive)
-  (kill-all-local-variables)
-  (indented-text-mode)
-  (setq major-mode 'change-log-mode
-	mode-name "Change Log"
-	left-margin 8
-	fill-column 74
-    indent-tabs-mode t
-    tab-width 8)
-  (use-local-map change-log-mode-map)
-  ;; Let each entry behave as one paragraph:
-  ;; We really do want "^" in paragraph-start below: it is only the lines that
-  ;; begin at column 0 (despite the left-margin of 8) that we are looking for.
-  (set (make-local-variable 'paragraph-start) "\\s *$\\|\f\\|^\\sw")
-  (set (make-local-variable 'paragraph-separate) "\\s *$\\|\f\\|^\\sw")
-  ;; Let all entries for one day behave as one page.
-  ;; Match null string on the date-line so that the date-line
-  ;; is grouped with what follows.
-  (set (make-local-variable 'page-delimiter) "^\\<\\|^\f")
-  (set (make-local-variable 'version-control) 'never)
-  (set (make-local-variable 'adaptive-fill-regexp) "\\s *")
-  (set (make-local-variable 'font-lock-defaults)
-       '(change-log-font-lock-keywords t))
-  (run-hooks 'change-log-mode-hook))
-
-;; It might be nice to have a general feature to replace this.  The idea I
-;; have is a variable giving a regexp matching text which should not be
-;; moved from bol by filling.  change-log-mode would set this to "^\\s *\\s(".
-;; But I don't feel up to implementing that today.
-(defun change-log-fill-paragraph (&optional justify)
-  "Fill the paragraph, but preserve open parentheses at beginning of lines.
-Prefix arg means justify as well."
-  (interactive "P")
-  (let ((end (save-excursion (forward-paragraph) (point)))
-	(beg (save-excursion (backward-paragraph)(point)))
-	(paragraph-start (concat paragraph-start "\\|\\s *\\s(")))
-    (fill-region beg end justify)))
-
-(defvar add-log-current-defun-header-regexp
-  "^\\([A-Z][A-Z_ ]*[A-Z_]\\|[-_a-zA-Z]+\\)[ \t]*[:=]"
-  "*Heuristic regexp used by `add-log-current-defun' for unknown major modes.")
-
-;;;###autoload
-(defun add-log-current-defun ()
-  "Return name of function definition point is in, or nil.
-
-Understands C, Lisp, LaTeX (\"functions\" are chapters, sections, ...),
-Texinfo (@node titles), Perl, and Fortran.
-
-Other modes are handled by a heuristic that looks in the 10K before
-point for uppercase headings starting in the first column or
-identifiers followed by `:' or `=', see variable
-`add-log-current-defun-header-regexp'.
-
-Has a preference of looking backwards."
-  (condition-case nil
-      (save-excursion
-	(let ((location (point)))
-	  (cond ((memq major-mode '(emacs-lisp-mode lisp-mode scheme-mode
-						    lisp-interaction-mode))
-		 ;; If we are now precisely at the beginning of a defun,
-		 ;; make sure beginning-of-defun finds that one
-		 ;; rather than the previous one.
-		 (or (eobp) (forward-char 1))
-		 (beginning-of-defun)
-		 ;; Make sure we are really inside the defun found, not after it.
-		 (if (and (looking-at "\\s(")
-			  (progn (end-of-defun)
-				 (< location (point)))
-			  (progn (forward-sexp -1)
-				 (>= location (point))))
-		     (progn
-		       (if (looking-at "\\s(")
-			   (forward-char 1))
-		       (forward-sexp 1)
-		       (skip-chars-forward " '")
-		       (buffer-substring (point)
-					 (progn (forward-sexp 1) (point))))))
-		((and (memq major-mode '(c-mode c++-mode c++-c-mode objc-mode))
-		      (save-excursion (beginning-of-line)
-				      ;; Use eq instead of = here to avoid
-				      ;; error when at bob and char-after
-				      ;; returns nil.
-				      (while (eq (char-after (- (point) 2)) ?\\)
-					(forward-line -1))
-				      (looking-at "[ \t]*#[ \t]*define[ \t]")))
-		 ;; Handle a C macro definition.
-		 (beginning-of-line)
-		 (while (eq (char-after (- (point) 2)) ?\\) ;not =; note above
-		   (forward-line -1))
-		 (search-forward "define")
-		 (skip-chars-forward " \t")
-		 (buffer-substring (point)
-				   (progn (forward-sexp 1) (point))))
-		((memq major-mode '(c-mode c++-mode c++-c-mode objc-mode))
-		 (beginning-of-line)
-		 ;; See if we are in the beginning part of a function,
-		 ;; before the open brace.  If so, advance forward.
-		 (while (not (looking-at "{\\|\\(\\s *$\\)"))
-		   (forward-line 1))
-		 (or (eobp)
-		     (forward-char 1))
-		 (beginning-of-defun)
-		 (if (progn (end-of-defun)
-			    (< location (point)))
-		     (progn
-		       (backward-sexp 1)
-		       (let (beg tem)
-
-			 (forward-line -1)
-			 ;; Skip back over typedefs of arglist.
-			 (while (and (not (bobp))
-				     (looking-at "[ \t\n]"))
-			   (forward-line -1))
-			 ;; See if this is using the DEFUN macro used in Emacs,
-			 ;; or the DEFUN macro used by the C library.
-			 (if (condition-case nil
-				 (and (save-excursion
-					(end-of-line)
-					(while (= (preceding-char) ?\\)
-					  (end-of-line 2))
-					(backward-sexp 1)
-					(beginning-of-line)
-					(setq tem (point))
-					(looking-at "DEFUN\\b"))
-				      (>= location tem))
-			       (error nil))
-			     (progn
-			       (goto-char tem)
-			       (down-list 1)
-			       (if (= (char-after (point)) ?\")
-				   (progn
-				     (forward-sexp 1)
-				     (skip-chars-forward " ,")))
-			       (buffer-substring (point)
-						 (progn (forward-sexp 1) (point))))
-                           (if (looking-at "^[+-]")
-                               (get-method-definition)
-                             ;; Ordinary C function syntax.
-                             (setq beg (point))
-                             (if (and (condition-case nil
-					  ;; Protect against "Unbalanced parens" error.
-					  (progn
-					    (down-list 1) ; into arglist
-					    (backward-up-list 1)
-					    (skip-chars-backward " \t")
-					    t)
-					(error nil))
-				      ;; Verify initial pos was after
-				      ;; real start of function.
-				      (save-excursion
-					(goto-char beg)
-					;; For this purpose, include the line
-					;; that has the decl keywords.  This
-					;; may also include some of the
-					;; comments before the function.
-					(while (and (not (bobp))
-						    (save-excursion
-						      (forward-line -1)
-						      (looking-at "[^\n\f]")))
-					  (forward-line -1))
-					(>= location (point)))
-                                          ;; Consistency check: going down and up
-                                          ;; shouldn't take us back before BEG.
-                                          (> (point) beg))
-				 (let (end middle)
-				   ;; Don't include any final newline
-				   ;; in the name we use.
-				   (if (= (preceding-char) ?\n)
-				       (forward-char -1))
-				   (setq end (point))
-				   (backward-sexp 1)
-				   ;; Now find the right beginning of the name.
-				   ;; Include certain keywords if they
-				   ;; precede the name.
-				   (setq middle (point))
-				   (forward-word -1)
-				   ;; Ignore these subparts of a class decl
-				   ;; and move back to the class name itself.
-				   (while (looking-at "public \\|private ")
-				     (skip-chars-backward " \t:")
-				     (setq end (point))
-				     (backward-sexp 1)
-				     (setq middle (point))
-				     (forward-word -1))
-				   (and (bolp)
-					(looking-at "struct \\|union \\|class ")
-					(setq middle (point)))
-				   (buffer-substring middle end)))))))))
-		((memq major-mode
-		       '(TeX-mode plain-TeX-mode LaTeX-mode;; tex-mode.el
-				  plain-tex-mode latex-mode;; cmutex.el
-				  ))
-		 (if (re-search-backward
-		      "\\\\\\(sub\\)*\\(section\\|paragraph\\|chapter\\)" nil t)
-		     (progn
-		       (goto-char (match-beginning 0))
-		       (buffer-substring (1+ (point));; without initial backslash
-					 (progn
-					   (end-of-line)
-					   (point))))))
-		((eq major-mode 'texinfo-mode)
-		 (if (re-search-backward "^@node[ \t]+\\([^,\n]+\\)" nil t)
-		     (buffer-substring (match-beginning 1)
-				       (match-end 1))))
-		((eq major-mode 'perl-mode)
-		 (if (re-search-backward "^sub[ \t]+\\([^ \t\n]+\\)" nil t)
-		     (buffer-substring (match-beginning 1)
-				       (match-end 1))))
-                ((eq major-mode 'fortran-mode)
-                 ;; must be inside function body for this to work
-                 (beginning-of-fortran-subprogram)
-                 (let ((case-fold-search t)) ; case-insensitive
-                   ;; search for fortran subprogram start
-                   (if (re-search-forward
-			 "^[ \t]*\\(program\\|subroutine\\|function\
-\\|[ \ta-z0-9*]*[ \t]+function\\)"
-			 nil t)
-                       (progn
-                         ;; move to EOL or before first left paren
-                         (if (re-search-forward "[(\n]" nil t)
-			     (progn (forward-char -1)
-				    (skip-chars-backward " \t"))
-			   (end-of-line))
-			 ;; Use the name preceding that.
-                         (buffer-substring (point)
-                                           (progn (forward-sexp -1)
-                                                  (point)))))))
-		(t
-		 ;; If all else fails, try heuristics
-		 (let (case-fold-search)
-		   (end-of-line)
-		   (if (re-search-backward add-log-current-defun-header-regexp
-					   (- (point) 10000)
-					   t)
-		       (buffer-substring (match-beginning 1)
-					 (match-end 1))))))))
-    (error nil)))
-
-(defvar get-method-definition-md)
-
-;; Subroutine used within get-method-definition.
-;; Add the last match in the buffer to the end of `md',
-;; followed by the string END; move to the end of that match.
-(defun get-method-definition-1 (end)
-  (setq get-method-definition-md
-	(concat get-method-definition-md 
-		(buffer-substring (match-beginning 1) (match-end 1))
-		end))
-  (goto-char (match-end 0)))
-
-;; For objective C, return the method name if we are in a method.
-(defun get-method-definition ()
-  (let ((get-method-definition-md "["))
-    (save-excursion
-      (if (re-search-backward "^@implementation\\s-*\\([A-Za-z_]*\\)" nil t)
-	  (get-method-definition-1 " ")))
-    (save-excursion
-      (cond
-       ((re-search-forward "^\\([-+]\\)[ \t\n\f\r]*\\(([^)]*)\\)?\\s-*" nil t)
-	(get-method-definition-1 "")
-	(while (not (looking-at "[{;]"))
-	  (looking-at
-	   "\\([A-Za-z_]*:?\\)\\s-*\\(([^)]*)\\)?[A-Za-z_]*[ \t\n\f\r]*")
-	  (get-method-definition-1 ""))
-	(concat get-method-definition-md "]"))))))
-
-
-(provide 'add-log)
-
-;;; add-log.el ends here
diff --git a/etc/add-log.vi b/etc/add-log.vi
deleted file mode 100644
index efb8c77aa..000000000
--- a/etc/add-log.vi
+++ /dev/null
@@ -1,11 +0,0 @@
-Here is a vi macro to create entries in the recommended format for
-GDB's ChangeLogs.
-
-map  1GO:r !date '+\%Y-\%m-\%d'2GA  Jason Molenda  (:r !whoamikJxA@:r !hostnameA)kJxkddjO
-	* 
-k$
-
-It contains control and escape sequences, so don't just cut and paste it.
-You'll need to change the "Jason Molenda" bit, of course. :-)  Put this
-in your $HOME/.exrc and when you type control-X in move-around-mode,
-you'll have a changelog template inserted.
-
---- Jason Molenda
diff --git a/etc/configbuild.ein b/etc/configbuild.ein
deleted file mode 100644
index 7a0e214f2..000000000
--- a/etc/configbuild.ein
+++ /dev/null
@@ -1,149 +0,0 @@
-%!PS-Adobe-2.0 EPSF-2.0
-%%Title: configbuild.fig
-%%Creator: fig2dev Version 3.1 Patchlevel 1
-%%CreationDate: Fri Jun 12 20:13:16 1998
-%%For: ian@tito.cygnus.com (Ian Lance Taylor)
-%%Orientation: Portrait
-%%BoundingBox: 0 0 322 173
-%%Pages: 0
-%%BeginSetup
-%%IncludeFeature: *PageSize Letter
-%%EndSetup
-%%EndComments
-/$F2psDict 200 dict def
-$F2psDict begin
-$F2psDict /mtrx matrix put
-/col-1 {} def
-/col0 {0.000 0.000 0.000 srgb} bind def
-/col1 {0.000 0.000 1.000 srgb} bind def
-/col2 {0.000 1.000 0.000 srgb} bind def
-/col3 {0.000 1.000 1.000 srgb} bind def
-/col4 {1.000 0.000 0.000 srgb} bind def
-/col5 {1.000 0.000 1.000 srgb} bind def
-/col6 {1.000 1.000 0.000 srgb} bind def
-/col7 {1.000 1.000 1.000 srgb} bind def
-/col8 {0.000 0.000 0.560 srgb} bind def
-/col9 {0.000 0.000 0.690 srgb} bind def
-/col10 {0.000 0.000 0.820 srgb} bind def
-/col11 {0.530 0.810 1.000 srgb} bind def
-/col12 {0.000 0.560 0.000 srgb} bind def
-/col13 {0.000 0.690 0.000 srgb} bind def
-/col14 {0.000 0.820 0.000 srgb} bind def
-/col15 {0.000 0.560 0.560 srgb} bind def
-/col16 {0.000 0.690 0.690 srgb} bind def
-/col17 {0.000 0.820 0.820 srgb} bind def
-/col18 {0.560 0.000 0.000 srgb} bind def
-/col19 {0.690 0.000 0.000 srgb} bind def
-/col20 {0.820 0.000 0.000 srgb} bind def
-/col21 {0.560 0.000 0.560 srgb} bind def
-/col22 {0.690 0.000 0.690 srgb} bind def
-/col23 {0.820 0.000 0.820 srgb} bind def
-/col24 {0.500 0.190 0.000 srgb} bind def
-/col25 {0.630 0.250 0.000 srgb} bind def
-/col26 {0.750 0.380 0.000 srgb} bind def
-/col27 {1.000 0.500 0.500 srgb} bind def
-/col28 {1.000 0.630 0.630 srgb} bind def
-/col29 {1.000 0.750 0.750 srgb} bind def
-/col30 {1.000 0.880 0.880 srgb} bind def
-/col31 {1.000 0.840 0.000 srgb} bind def
-
-end
-save
--62.0 226.0 translate
-1 -1 scale
-
-/clp {closepath} bind def
-/ef {eofill} bind def
-/gr {grestore} bind def
-/gs {gsave} bind def
-/l {lineto} bind def
-/m {moveto} bind def
-/n {newpath} bind def
-/s {stroke} bind def
-/slc {setlinecap} bind def
-/slj {setlinejoin} bind def
-/slw {setlinewidth} bind def
-/srgb {setrgbcolor} bind def
-/rot {rotate} bind def
-/sc {scale} bind def
-/tr {translate} bind def
-/tnt {dup dup currentrgbcolor
-  4 -2 roll dup 1 exch sub 3 -1 roll mul add
-  4 -2 roll dup 1 exch sub 3 -1 roll mul add
-  4 -2 roll dup 1 exch sub 3 -1 roll mul add srgb}
-  bind def
-/shd {dup dup currentrgbcolor 4 -2 roll mul 4 -2 roll mul
-  4 -2 roll mul srgb} bind def
-/$F2psBegin {$F2psDict begin /$F2psEnteredState save def} def
-/$F2psEnd {$F2psEnteredState restore end} def
-%%EndProlog
-
-$F2psBegin
-10 setmiterlimit
- 0.06000 0.06000 sc
-7.500 slw
-% Polyline
-n 1050 900 m 2100 900 l  2100 1425 l  1050 1425 l  clp  gs col-1 s gr 
-% Polyline
-n 1500 1425 m 1500 2100 l  gs col-1 s gr 
-n 1530.00 1980.00 m 1500.00 2100.00 l 1470.00 1980.00 l  1500.50 1980.50 l 1530.00 1980.00 l clp gs 0.00 setgray ef gr gs col-1 s gr
-% Polyline
-n 1500 2625 m 1500 3300 l  gs col-1 s gr 
-n 1530.00 3180.00 m 1500.00 3300.00 l 1470.00 3180.00 l  1500.50 3180.50 l 1530.00 3180.00 l clp gs 0.00 setgray ef gr gs col-1 s gr
-% Polyline
-n 2925 900 m 3825 900 l  3825 1425 l  2925 1425 l  clp  gs col-1 s gr 
-% Polyline
-n 1155 2100 m 1050 2100 1050 2520 105 arcto 4 {pop} repeat 1050 2625 2220 2625 105 arcto 4 {pop} repeat 2325 2625 2325 2205 105 arcto 4 {pop} repeat 2325 2100 1155 2100 105 arcto 4 {pop} repeat clp  gs col-1 s gr 
-% Polyline
-n 2850 2100 m 4125 2100 l  4125 2625 l  2850 2625 l  clp  gs col-1 s gr 
-% Polyline
-n 3375 1425 m 3375 2100 l  gs col-1 s gr 
-n 3405.00 1980.00 m 3375.00 2100.00 l 3345.00 1980.00 l  3375.50 1980.50 l 3405.00 1980.00 l clp gs 0.00 setgray ef gr gs col-1 s gr
-% Polyline
-n 5100 900 m 6300 900 l  6300 1350 l  5100 1350 l  clp  gs col-1 s gr 
-% Polyline
-n 5625 1350 m 5625 2100 l  gs col-1 s gr 
-n 5655.00 1980.00 m 5625.00 2100.00 l 5595.00 1980.00 l  5625.50 1980.50 l 5655.00 1980.00 l clp gs 0.00 setgray ef gr gs col-1 s gr
-% Polyline
-n 5205 2100 m 5100 2100 5100 2520 105 arcto 4 {pop} repeat 5100 2625 6270 2625 105 arcto 4 {pop} repeat 6375 2625 6375 2205 105 arcto 4 {pop} repeat 6375 2100 5205 2100 105 arcto 4 {pop} repeat clp  gs col-1 s gr 
-% Polyline
-n 5625 2625 m 5625 3300 l  gs col-1 s gr 
-n 5655.00 3180.00 m 5625.00 3300.00 l 5595.00 3180.00 l  5625.50 3180.50 l 5655.00 3180.00 l clp gs 0.00 setgray ef gr gs col-1 s gr
-% Polyline
-n 5100 3300 m 6225 3300 l  6225 3750 l  5100 3750 l  clp  gs col-1 s gr 
-% Polyline
-	[1 50.0] 50.000000 setdash
-n 2850 2400 m 2325 2400 l  gs col-1 s gr 	[] 0 setdash
-n 2445.00 2430.00 m 2325.00 2400.00 l 2445.00 2370.00 l  2445.50 2400.50 l 2445.00 2430.00 l clp gs 0.00 setgray ef gr gs col-1 s gr
-% Polyline
-	[1 50.0] 50.000000 setdash
-n 4125 2400 m 5100 2400 l  gs col-1 s gr 	[] 0 setdash
-n 4980.00 2370.00 m 5100.00 2400.00 l 4980.00 2430.00 l  4980.50 2400.50 l 4980.00 2370.00 l clp gs 0.00 setgray ef gr gs col-1 s gr
-% Polyline
-n 1050 3300 m 1950 3300 l  1950 3750 l  1050 3750 l  clp  gs col-1 s gr 
-/Times-Roman findfont 180.00 scalefont setfont
-1200 1200 m
-gs 1 -1 sc (config.in) col-1 show gr
-/Times-Roman findfont 180.00 scalefont setfont
-3000 1200 m
-gs 1 -1 sc (configure) col-1 show gr
-/Times-Roman findfont 180.00 scalefont setfont
-3000 2400 m
-gs 1 -1 sc (config.status) col-1 show gr
-/Times-Roman findfont 180.00 scalefont setfont
-1200 2400 m
-gs 1 -1 sc (config.status) col-1 show gr
-/Times-Roman findfont 180.00 scalefont setfont
-1200 3600 m
-gs 1 -1 sc (config.h) col-1 show gr
-/Times-Roman findfont 180.00 scalefont setfont
-5250 1200 m
-gs 1 -1 sc (Makefile.in) col-1 show gr
-/Times-Roman findfont 180.00 scalefont setfont
-5250 2400 m
-gs 1 -1 sc (config.status) col-1 show gr
-/Times-Roman findfont 180.00 scalefont setfont
-5250 3600 m
-gs 1 -1 sc (Makefile) col-1 show gr
-$F2psEnd
-restore
diff --git a/etc/configbuild.fig b/etc/configbuild.fig
deleted file mode 100644
index 747592d3d..000000000
--- a/etc/configbuild.fig
+++ /dev/null
@@ -1,50 +0,0 @@
-#FIG 3.1
-Portrait
-Center
-Inches
-1200 2
-2 2 0 1 -1 7 0 0 -1 0.000 0 0 0 0 0 5
-	 1050 900 2100 900 2100 1425 1050 1425 1050 900
-2 1 0 1 -1 7 0 0 -1 0.000 0 0 -1 1 0 2
-	1 1 1.00 60.00 120.00
-	 1500 1425 1500 2100
-2 1 0 1 -1 7 0 0 -1 0.000 0 0 -1 1 0 2
-	1 1 1.00 60.00 120.00
-	 1500 2625 1500 3300
-2 2 0 1 -1 7 0 0 -1 0.000 0 0 0 0 0 5
-	 2925 900 3825 900 3825 1425 2925 1425 2925 900
-2 4 0 1 -1 7 0 0 -1 0.000 0 0 7 0 0 5
-	 2325 2625 2325 2100 1050 2100 1050 2625 2325 2625
-2 2 0 1 -1 7 0 0 -1 0.000 0 0 0 0 0 5
-	 2850 2100 4125 2100 4125 2625 2850 2625 2850 2100
-2 1 0 1 -1 7 0 0 -1 0.000 0 0 -1 1 0 2
-	1 1 1.00 60.00 120.00
-	 3375 1425 3375 2100
-2 2 0 1 -1 7 0 0 -1 0.000 0 0 0 0 0 5
-	 5100 900 6300 900 6300 1350 5100 1350 5100 900
-2 1 0 1 -1 7 0 0 -1 0.000 0 0 -1 1 0 2
-	1 1 1.00 60.00 120.00
-	 5625 1350 5625 2100
-2 4 0 1 -1 7 0 0 -1 0.000 0 0 7 0 0 5
-	 6375 2625 6375 2100 5100 2100 5100 2625 6375 2625
-2 1 0 1 -1 7 0 0 -1 0.000 0 0 -1 1 0 2
-	1 1 1.00 60.00 120.00
-	 5625 2625 5625 3300
-2 2 0 1 -1 7 0 0 -1 0.000 0 0 0 0 0 5
-	 5100 3300 6225 3300 6225 3750 5100 3750 5100 3300
-2 1 2 1 -1 7 0 0 -1 3.000 0 0 -1 1 0 2
-	1 1 1.00 60.00 120.00
-	 2850 2400 2325 2400
-2 1 2 1 -1 7 0 0 -1 3.000 0 0 -1 1 0 2
-	1 1 1.00 60.00 120.00
-	 4125 2400 5100 2400
-2 2 0 1 -1 7 0 0 -1 0.000 0 0 0 0 0 5
-	 1050 3300 1950 3300 1950 3750 1050 3750 1050 3300
-4 0 -1 0 0 0 12 0.0000000 4 180 645 1200 1200 config.in\001
-4 0 -1 0 0 0 12 0.0000000 4 180 705 3000 1200 configure\001
-4 0 -1 0 0 0 12 0.0000000 4 180 990 3000 2400 config.status\001
-4 0 -1 0 0 0 12 0.0000000 4 180 990 1200 2400 config.status\001
-4 0 -1 0 0 0 12 0.0000000 4 180 600 1200 3600 config.h\001
-4 0 -1 0 0 0 12 0.0000000 4 135 855 5250 1200 Makefile.in\001
-4 0 -1 0 0 0 12 0.0000000 4 180 990 5250 2400 config.status\001
-4 0 -1 0 0 0 12 0.0000000 4 135 675 5250 3600 Makefile\001
diff --git a/etc/configbuild.jin b/etc/configbuild.jin
deleted file mode 100644
index 44cd9397a..000000000
--- a/etc/configbuild.jin
+++ /dev/null
diff --git a/etc/configbuild.tin b/etc/configbuild.tin
deleted file mode 100644
index cfdd6fe07..000000000
--- a/etc/configbuild.tin
+++ /dev/null
@@ -1,9 +0,0 @@
-   config.in        *configure*      Makefile.in
-      |                  |               |
-      |                  v               |
-      |             config.status        |
-      |                  |               |
-   *config.status*<======+==========>*config.status*
-      |                                  |
-      v                                  v
-   config.h                          Makefile
diff --git a/etc/configdev.ein b/etc/configdev.ein
deleted file mode 100644
index 7f837850d..000000000
--- a/etc/configdev.ein
+++ /dev/null
@@ -1,185 +0,0 @@
-%!PS-Adobe-2.0 EPSF-2.0
-%%Title: configdev.fig
-%%Creator: fig2dev Version 3.1 Patchlevel 1
-%%CreationDate: Mon Jun 15 17:35:19 1998
-%%For: ian@tito.cygnus.com (Ian Lance Taylor)
-%%Orientation: Portrait
-%%BoundingBox: 0 0 344 317
-%%Pages: 0
-%%BeginSetup
-%%IncludeFeature: *PageSize Letter
-%%EndSetup
-%%EndComments
-/$F2psDict 200 dict def
-$F2psDict begin
-$F2psDict /mtrx matrix put
-/col-1 {} def
-/col0 {0.000 0.000 0.000 srgb} bind def
-/col1 {0.000 0.000 1.000 srgb} bind def
-/col2 {0.000 1.000 0.000 srgb} bind def
-/col3 {0.000 1.000 1.000 srgb} bind def
-/col4 {1.000 0.000 0.000 srgb} bind def
-/col5 {1.000 0.000 1.000 srgb} bind def
-/col6 {1.000 1.000 0.000 srgb} bind def
-/col7 {1.000 1.000 1.000 srgb} bind def
-/col8 {0.000 0.000 0.560 srgb} bind def
-/col9 {0.000 0.000 0.690 srgb} bind def
-/col10 {0.000 0.000 0.820 srgb} bind def
-/col11 {0.530 0.810 1.000 srgb} bind def
-/col12 {0.000 0.560 0.000 srgb} bind def
-/col13 {0.000 0.690 0.000 srgb} bind def
-/col14 {0.000 0.820 0.000 srgb} bind def
-/col15 {0.000 0.560 0.560 srgb} bind def
-/col16 {0.000 0.690 0.690 srgb} bind def
-/col17 {0.000 0.820 0.820 srgb} bind def
-/col18 {0.560 0.000 0.000 srgb} bind def
-/col19 {0.690 0.000 0.000 srgb} bind def
-/col20 {0.820 0.000 0.000 srgb} bind def
-/col21 {0.560 0.000 0.560 srgb} bind def
-/col22 {0.690 0.000 0.690 srgb} bind def
-/col23 {0.820 0.000 0.820 srgb} bind def
-/col24 {0.500 0.190 0.000 srgb} bind def
-/col25 {0.630 0.250 0.000 srgb} bind def
-/col26 {0.750 0.380 0.000 srgb} bind def
-/col27 {1.000 0.500 0.500 srgb} bind def
-/col28 {1.000 0.630 0.630 srgb} bind def
-/col29 {1.000 0.750 0.750 srgb} bind def
-/col30 {1.000 0.880 0.880 srgb} bind def
-/col31 {1.000 0.840 0.000 srgb} bind def
-
-end
-save
--62.0 370.0 translate
-1 -1 scale
-
-/clp {closepath} bind def
-/ef {eofill} bind def
-/gr {grestore} bind def
-/gs {gsave} bind def
-/l {lineto} bind def
-/m {moveto} bind def
-/n {newpath} bind def
-/s {stroke} bind def
-/slc {setlinecap} bind def
-/slj {setlinejoin} bind def
-/slw {setlinewidth} bind def
-/srgb {setrgbcolor} bind def
-/rot {rotate} bind def
-/sc {scale} bind def
-/tr {translate} bind def
-/tnt {dup dup currentrgbcolor
-  4 -2 roll dup 1 exch sub 3 -1 roll mul add
-  4 -2 roll dup 1 exch sub 3 -1 roll mul add
-  4 -2 roll dup 1 exch sub 3 -1 roll mul add srgb}
-  bind def
-/shd {dup dup currentrgbcolor 4 -2 roll mul 4 -2 roll mul
-  4 -2 roll mul srgb} bind def
-/$F2psBegin {$F2psDict begin /$F2psEnteredState save def} def
-/$F2psEnd {$F2psEnteredState restore end} def
-%%EndProlog
-
-$F2psBegin
-10 setmiterlimit
- 0.06000 0.06000 sc
-7.500 slw
-% Polyline
-n 1050 900 m 2100 900 l  2100 1425 l  1050 1425 l  clp  gs col-1 s gr 
-% Polyline
-n 2925 900 m 3975 900 l  3975 1425 l  2925 1425 l  clp  gs col-1 s gr 
-% Polyline
-n 5550 900 m 6750 900 l  6750 1350 l  5550 1350 l  clp  gs col-1 s gr 
-% Polyline
-n 3750 1800 m 5025 1800 l  5025 2250 l  3750 2250 l  clp  gs col-1 s gr 
-% Polyline
-n 1155 2100 m 1050 2100 1050 2520 105 arcto 4 {pop} repeat 1050 2625 2070 2625 105 arcto 4 {pop} repeat 2175 2625 2175 2205 105 arcto 4 {pop} repeat 2175 2100 1155 2100 105 arcto 4 {pop} repeat clp  gs col-1 s gr 
-% Polyline
-n 5550 3300 m 6675 3300 l  6675 3750 l  5550 3750 l  clp  gs col-1 s gr 
-% Polyline
-n 5655 2100 m 5550 2100 5550 2520 105 arcto 4 {pop} repeat 5550 2625 6495 2625 105 arcto 4 {pop} repeat 6600 2625 6600 2205 105 arcto 4 {pop} repeat 6600 2100 5655 2100 105 arcto 4 {pop} repeat clp  gs col-1 s gr 
-% Polyline
-n 3750 3600 m 4875 3600 l  4875 4050 l  3750 4050 l  clp  gs col-1 s gr 
-% Polyline
-n 3855 2700 m 3750 2700 3750 3045 105 arcto 4 {pop} repeat 3750 3150 4545 3150 105 arcto 4 {pop} repeat 4650 3150 4650 2805 105 arcto 4 {pop} repeat 4650 2700 3855 2700 105 arcto 4 {pop} repeat clp  gs col-1 s gr 
-% Polyline
-n 2850 5700 m 3750 5700 l  3750 6150 l  2850 6150 l  clp  gs col-1 s gr 
-% Polyline
-n 3030 4800 m 2925 4800 2925 5145 105 arcto 4 {pop} repeat 2925 5250 3645 5250 105 arcto 4 {pop} repeat 3750 5250 3750 4905 105 arcto 4 {pop} repeat 3750 4800 3030 4800 105 arcto 4 {pop} repeat clp  gs col-1 s gr 
-% Polyline
-n 1500 1425 m 1500 2100 l  gs col-1 s gr 
-n 1530.00 1980.00 m 1500.00 2100.00 l 1470.00 1980.00 l  1500.50 1980.50 l 1530.00 1980.00 l clp gs 0.00 setgray ef gr gs col-1 s gr
-% Polyline
-n 3300 1425 m 3300 4800 l  gs col-1 s gr 
-n 3330.00 4680.00 m 3300.00 4800.00 l 3270.00 4680.00 l  3300.50 4680.50 l 3330.00 4680.00 l clp gs 0.00 setgray ef gr gs col-1 s gr
-% Polyline
-n 3300 1575 m 1875 1575 l  1875 2100 l  gs col-1 s gr 
-n 1905.00 1980.00 m 1875.00 2100.00 l 1845.00 1980.00 l  1875.50 1980.50 l 1905.00 1980.00 l clp gs 0.00 setgray ef gr gs col-1 s gr
-% Polyline
-n 3300 1575 m 5700 1575 l  5700 2100 l  gs col-1 s gr 
-n 5730.00 1980.00 m 5700.00 2100.00 l 5670.00 1980.00 l  5700.50 1980.50 l 5730.00 1980.00 l clp gs 0.00 setgray ef gr gs col-1 s gr
-% Polyline
-n 6225 1350 m 6225 2100 l  gs col-1 s gr 
-n 6255.00 1980.00 m 6225.00 2100.00 l 6195.00 1980.00 l  6225.50 1980.50 l 6255.00 1980.00 l clp gs 0.00 setgray ef gr gs col-1 s gr
-% Polyline
-n 6075 2625 m 6075 3300 l  gs col-1 s gr 
-n 6105.00 3180.00 m 6075.00 3300.00 l 6045.00 3180.00 l  6075.50 3180.50 l 6105.00 3180.00 l clp gs 0.00 setgray ef gr gs col-1 s gr
-% Polyline
-n 4200 2250 m 4200 2700 l  gs col-1 s gr 
-n 4230.00 2580.00 m 4200.00 2700.00 l 4170.00 2580.00 l  4200.50 2580.50 l 4230.00 2580.00 l clp gs 0.00 setgray ef gr gs col-1 s gr
-% Polyline
-n 4200 3150 m 4200 3600 l  gs col-1 s gr 
-n 4230.00 3480.00 m 4200.00 3600.00 l 4170.00 3480.00 l  4200.50 3480.50 l 4230.00 3480.00 l clp gs 0.00 setgray ef gr gs col-1 s gr
-% Polyline
-n 4200 4050 m 4200 4500 l  3675 4500 l  3675 4800 l  gs col-1 s gr 
-n 3705.00 4680.00 m 3675.00 4800.00 l 3645.00 4680.00 l  3675.50 4680.50 l 3705.00 4680.00 l clp gs 0.00 setgray ef gr gs col-1 s gr
-% Polyline
-n 3375 5250 m 3375 5700 l  gs col-1 s gr 
-n 3405.00 5580.00 m 3375.00 5700.00 l 3345.00 5580.00 l  3375.50 5580.50 l 3405.00 5580.00 l clp gs 0.00 setgray ef gr gs col-1 s gr
-% Polyline
-n 3300 2925 m 3750 2925 l  gs col-1 s gr 
-n 3630.00 2895.00 m 3750.00 2925.00 l 3630.00 2955.00 l  3630.50 2925.50 l 3630.00 2895.00 l clp gs 0.00 setgray ef gr gs col-1 s gr
-% Polyline
-n 1500 2625 m 1500 3300 l  gs col-1 s gr 
-n 1530.00 3180.00 m 1500.00 3300.00 l 1470.00 3180.00 l  1500.50 3180.50 l 1530.00 3180.00 l clp gs 0.00 setgray ef gr gs col-1 s gr
-% Polyline
-n 1050 3300 m 2100 3300 l  2100 3750 l  1050 3750 l  clp  gs col-1 s gr 
-% Polyline
-n 4875 3825 m 5250 3825 l  5250 2400 l  5550 2400 l  gs col-1 s gr 
-n 5430.00 2370.00 m 5550.00 2400.00 l 5430.00 2430.00 l  5430.50 2400.50 l 5430.00 2370.00 l clp gs 0.00 setgray ef gr gs col-1 s gr
-/Times-Roman findfont 180.00 scalefont setfont
-1200 1200 m
-gs 1 -1 sc (acconfig.h) col-1 show gr
-/Times-Roman findfont 180.00 scalefont setfont
-3000 1200 m
-gs 1 -1 sc (configure.in) col-1 show gr
-/Times-Roman findfont 180.00 scalefont setfont
-5700 1200 m
-gs 1 -1 sc (Makefile.am) col-1 show gr
-/Times-Roman findfont 180.00 scalefont setfont
-3900 2100 m
-gs 1 -1 sc (acinclude.m4) col-1 show gr
-/Times-Roman findfont 180.00 scalefont setfont
-1200 2400 m
-gs 1 -1 sc (autoheader) col-1 show gr
-/Times-Roman findfont 180.00 scalefont setfont
-1200 3600 m
-gs 1 -1 sc (config.in) col-1 show gr
-/Times-Roman findfont 180.00 scalefont setfont
-5700 3600 m
-gs 1 -1 sc (Makefile.in) col-1 show gr
-/Times-Roman findfont 180.00 scalefont setfont
-5700 2400 m
-gs 1 -1 sc (automake) col-1 show gr
-/Times-Roman findfont 180.00 scalefont setfont
-3900 3900 m
-gs 1 -1 sc (aclocal.m4) col-1 show gr
-/Times-Roman findfont 180.00 scalefont setfont
-3900 3000 m
-gs 1 -1 sc (aclocal) col-1 show gr
-/Times-Roman findfont 180.00 scalefont setfont
-3000 6000 m
-gs 1 -1 sc (configure) col-1 show gr
-/Times-Roman findfont 180.00 scalefont setfont
-3000 5100 m
-gs 1 -1 sc (autoconf) col-1 show gr
-$F2psEnd
-restore
diff --git a/etc/configdev.fig b/etc/configdev.fig
deleted file mode 100644
index 4d386ec4f..000000000
--- a/etc/configdev.fig
+++ /dev/null
@@ -1,80 +0,0 @@
-#FIG 3.1
-Portrait
-Center
-Inches
-1200 2
-2 2 0 1 -1 7 0 0 -1 0.000 0 0 0 0 0 5
-	 1050 900 2100 900 2100 1425 1050 1425 1050 900
-2 2 0 1 -1 7 0 0 -1 0.000 0 0 0 0 0 5
-	 2925 900 3975 900 3975 1425 2925 1425 2925 900
-2 2 0 1 -1 7 0 0 -1 0.000 0 0 0 0 0 5
-	 5550 900 6750 900 6750 1350 5550 1350 5550 900
-2 2 0 1 -1 7 0 0 -1 0.000 0 0 0 0 0 5
-	 3750 1800 5025 1800 5025 2250 3750 2250 3750 1800
-2 4 0 1 -1 7 0 0 -1 0.000 0 0 7 0 0 5
-	 2175 2625 2175 2100 1050 2100 1050 2625 2175 2625
-2 2 0 1 -1 7 0 0 -1 0.000 0 0 0 0 0 5
-	 5550 3300 6675 3300 6675 3750 5550 3750 5550 3300
-2 4 0 1 -1 7 0 0 -1 0.000 0 0 7 0 0 5
-	 6600 2625 6600 2100 5550 2100 5550 2625 6600 2625
-2 2 0 1 -1 7 0 0 -1 0.000 0 0 0 0 0 5
-	 3750 3600 4875 3600 4875 4050 3750 4050 3750 3600
-2 4 0 1 -1 7 0 0 -1 0.000 0 0 7 0 0 5
-	 4650 3150 4650 2700 3750 2700 3750 3150 4650 3150
-2 2 0 1 -1 7 0 0 -1 0.000 0 0 0 0 0 5
-	 2850 5700 3750 5700 3750 6150 2850 6150 2850 5700
-2 4 0 1 -1 7 0 0 -1 0.000 0 0 7 0 0 5
-	 3750 5250 3750 4800 2925 4800 2925 5250 3750 5250
-2 1 0 1 -1 7 0 0 -1 0.000 0 0 -1 1 0 2
-	1 1 1.00 60.00 120.00
-	 1500 1425 1500 2100
-2 1 0 1 -1 7 0 0 -1 0.000 0 0 -1 1 0 2
-	1 1 1.00 60.00 120.00
-	 3300 1425 3300 4800
-2 1 0 1 -1 7 0 0 -1 0.000 0 0 -1 1 0 3
-	1 1 1.00 60.00 120.00
-	 3300 1575 1875 1575 1875 2100
-2 1 0 1 -1 7 0 0 -1 0.000 0 0 -1 1 0 3
-	1 1 1.00 60.00 120.00
-	 3300 1575 5700 1575 5700 2100
-2 1 0 1 -1 7 0 0 -1 0.000 0 0 -1 1 0 2
-	1 1 1.00 60.00 120.00
-	 6225 1350 6225 2100
-2 1 0 1 -1 7 0 0 -1 0.000 0 0 -1 1 0 2
-	1 1 1.00 60.00 120.00
-	 6075 2625 6075 3300
-2 1 0 1 -1 7 0 0 -1 0.000 0 0 -1 1 0 2
-	1 1 1.00 60.00 120.00
-	 4200 2250 4200 2700
-2 1 0 1 -1 7 0 0 -1 0.000 0 0 -1 1 0 2
-	1 1 1.00 60.00 120.00
-	 4200 3150 4200 3600
-2 1 0 1 -1 7 0 0 -1 0.000 0 0 -1 1 0 4
-	1 1 1.00 60.00 120.00
-	 4200 4050 4200 4500 3675 4500 3675 4800
-2 1 0 1 -1 7 0 0 -1 0.000 0 0 -1 1 0 2
-	1 1 1.00 60.00 120.00
-	 3375 5250 3375 5700
-2 1 0 1 -1 7 0 0 -1 0.000 0 0 -1 1 0 2
-	1 1 1.00 60.00 120.00
-	 3300 2925 3750 2925
-2 1 0 1 -1 7 0 0 -1 0.000 0 0 -1 1 0 2
-	1 1 1.00 60.00 120.00
-	 1500 2625 1500 3300
-2 2 0 1 -1 7 0 0 -1 0.000 0 0 0 0 0 5
-	 1050 3300 2100 3300 2100 3750 1050 3750 1050 3300
-2 1 0 1 -1 7 0 0 -1 0.000 0 0 -1 1 0 4
-	1 1 1.00 60.00 120.00
-	 4875 3825 5250 3825 5250 2400 5550 2400
-4 0 -1 0 0 0 12 0.0000000 4 180 780 1200 1200 acconfig.h\001
-4 0 -1 0 0 0 12 0.0000000 4 180 885 3000 1200 configure.in\001
-4 0 -1 0 0 0 12 0.0000000 4 135 945 5700 1200 Makefile.am\001
-4 0 -1 0 0 0 12 0.0000000 4 135 990 3900 2100 acinclude.m4\001
-4 0 -1 0 0 0 12 0.0000000 4 135 840 1200 2400 autoheader\001
-4 0 -1 0 0 0 12 0.0000000 4 180 645 1200 3600 config.in\001
-4 0 -1 0 0 0 12 0.0000000 4 135 855 5700 3600 Makefile.in\001
-4 0 -1 0 0 0 12 0.0000000 4 135 735 5700 2400 automake\001
-4 0 -1 0 0 0 12 0.0000000 4 135 810 3900 3900 aclocal.m4\001
-4 0 -1 0 0 0 12 0.0000000 4 135 540 3900 3000 aclocal\001
-4 0 -1 0 0 0 12 0.0000000 4 180 705 3000 6000 configure\001
-4 0 -1 0 0 0 12 0.0000000 4 135 660 3000 5100 autoconf\001
diff --git a/etc/configdev.jin b/etc/configdev.jin
deleted file mode 100644
index 9b11a71ac..000000000
--- a/etc/configdev.jin
+++ /dev/null
diff --git a/etc/configdev.tin b/etc/configdev.tin
deleted file mode 100644
index c9b6f34f4..000000000
--- a/etc/configdev.tin
+++ /dev/null
@@ -1,17 +0,0 @@
-   acconfig.h       configure.in                 Makefile.am
-       |                |                           |
-       |  --------------+----------------------     |
-       |  |             |                     |     |
-       v  v             |    acinclude.m4     |     |
-   *autoheader*         |         |           v     v
-       |                |         v      --->*automake* 
-       v                |--->*aclocal*   |       |      
-   config.in            |         |      |       v      
-                        |         v      |   Makefile.in
-                        |    aclocal.m4---
-                        |     |
-                        v     v
-                       *autoconf*
-                           |
-                           v
-                       configure
diff --git a/etc/configure b/etc/configure
deleted file mode 100755
index 96104c549..000000000
--- a/etc/configure
+++ /dev/null
@@ -1,2241 +0,0 @@
-#! /bin/sh
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.59.
-#
-# Copyright (C) 2003 Free Software Foundation, Inc.
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-## --------------------- ##
-## M4sh Initialization.  ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-  set -o posix
-fi
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  as_unset=unset
-else
-  as_unset=false
-fi
-
-
-# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    $as_unset $as_var
-  fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)$' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\/\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-
-
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
-fi
-
-
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
-  # Find who we are.  Look in the path if we contain no path at all
-  # relative or not.
-  case $0 in
-    *[\\/]* ) as_myself=$0 ;;
-    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
-       ;;
-  esac
-  # We did not find ourselves, most probably we were run as `sh COMMAND'
-  # in which case we are not to be found in the path.
-  if test "x$as_myself" = x; then
-    as_myself=$0
-  fi
-  if test ! -f "$as_myself"; then
-    { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
-   { (exit 1); exit 1; }; }
-  fi
-  case $CONFIG_SHELL in
-  '')
-    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for as_base in sh bash ksh sh5; do
-	 case $as_dir in
-	 /*)
-	   if ("$as_dir/$as_base" -c '
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-	     CONFIG_SHELL=$as_dir/$as_base
-	     export CONFIG_SHELL
-	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-	   fi;;
-	 esac
-       done
-done
-;;
-  esac
-
-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-  # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line before each line; the second 'sed' does the real
-  # work.  The second script uses 'N' to pair each line-number line
-  # with the numbered line, and appends trailing '-' during
-  # substitution so that $LINENO is not a special case at line end.
-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
-  sed '=' <$as_myself |
-    sed '
-      N
-      s,$,-,
-      : loop
-      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-      t loop
-      s,-$,,
-      s,^['$as_cr_digits']*\n,,
-    ' >$as_me.lineno &&
-  chmod +x $as_me.lineno ||
-    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-   { (exit 1); exit 1; }; }
-
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensible to this).
-  . ./$as_me.lineno
-  # Exit status is that of the last command.
-  exit
-}
-
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-  *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T='	' ;;
-  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  # We could just check for DJGPP; but this test a) works b) is more generic
-  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-  if test -f conf$$.exe; then
-    # Don't use ln at all; we don't have any links
-    as_ln_s='cp -p'
-  else
-    as_ln_s='ln -s'
-  fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
-else
-  as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.file
-
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p=:
-else
-  test -d ./-p && rmdir ./-p
-  as_mkdir_p=false
-fi
-
-as_executable_p="test -f"
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" 	$as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
-
-# Name of the host.
-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-exec 6>&1
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-ac_config_libobj_dir=.
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-# Maximum number of lines to put in a shell here document.
-# This variable seems obsolete.  It should probably be removed, and
-# only ac_max_sed_lines should be used.
-: ${ac_max_here_lines=38}
-
-# Identity of this package.
-PACKAGE_NAME=
-PACKAGE_TARNAME=
-PACKAGE_VERSION=
-PACKAGE_STRING=
-PACKAGE_BUGREPORT=
-
-ac_unique_file="Makefile.in"
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA datarootdir docdir htmldir pdfdir LIBOBJS LTLIBOBJS'
-ac_subst_files=''
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-ac_prev=
-for ac_option
-do
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case $ac_option in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir=$ac_optarg ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build_alias ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build_alias=$ac_optarg ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file=$ac_optarg ;;
-
-  --config-cache | -C)
-    cache_file=config.cache ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir=$ac_optarg ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-   { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-    eval "enable_$ac_feature=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-   { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-    case $ac_option in
-      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_$ac_feature='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix=$ac_optarg ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he | -h)
-    ac_init_help=long ;;
-  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
-    ac_init_help=recursive ;;
-  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
-    ac_init_help=short ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host_alias ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host_alias=$ac_optarg ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir=$ac_optarg ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir=$ac_optarg ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir=$ac_optarg ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir=$ac_optarg ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir=$ac_optarg ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir=$ac_optarg ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c | -n)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir=$ac_optarg ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix=$ac_optarg ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix=$ac_optarg ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix=$ac_optarg ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name=$ac_optarg ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir=$ac_optarg ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir=$ac_optarg ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site=$ac_optarg ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir=$ac_optarg ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir=$ac_optarg ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target_alias ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target_alias=$ac_optarg ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers | -V)
-    ac_init_version=: ;;
-
-  -with-* | --with-*)
-    ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
-   { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case $ac_option in
-      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_$ac_package='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
-   { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package | sed 's/-/_/g'`
-    eval "with_$ac_package=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes=$ac_optarg ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries=$ac_optarg ;;
-
-  -*) { echo "$as_me: error: unrecognized option: $ac_option
-Try \`$0 --help' for more information." >&2
-   { (exit 1); exit 1; }; }
-    ;;
-
-  *=*)
-    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
-   { (exit 1); exit 1; }; }
-    ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
-    eval "$ac_envvar='$ac_optarg'"
-    export $ac_envvar ;;
-
-  *)
-    # FIXME: should be removed in autoconf 3.0.
-    echo "$as_me: WARNING: you should use --build, --host, --target" >&2
-    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      echo "$as_me: WARNING: invalid host type: $ac_option" >&2
-    : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  { echo "$as_me: error: missing argument to $ac_option" >&2
-   { (exit 1); exit 1; }; }
-fi
-
-# Be sure to have absolute paths.
-for ac_var in exec_prefix prefix
-do
-  eval ac_val=$`echo $ac_var`
-  case $ac_val in
-    [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
-    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; };;
-  esac
-done
-
-# Be sure to have absolute paths.
-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
-	      localstatedir libdir includedir oldincludedir infodir mandir
-do
-  eval ac_val=$`echo $ac_var`
-  case $ac_val in
-    [\\/$]* | ?:[\\/]* ) ;;
-    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; };;
-  esac
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
-  if test "x$build_alias" = x; then
-    cross_compiling=maybe
-    echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
-    If a cross compiler is detected then cross compile mode will be used." >&2
-  elif test "x$build_alias" != "x$host_alias"; then
-    cross_compiling=yes
-  fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_confdir=`(dirname "$0") 2>/dev/null ||
-$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$0" : 'X\(//\)[^/]' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$0" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
-   { (exit 1); exit 1; }; }
-  else
-    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
-   { (exit 1); exit 1; }; }
-  fi
-fi
-(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
-  { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
-   { (exit 1); exit 1; }; }
-srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
-ac_env_build_alias_set=${build_alias+set}
-ac_env_build_alias_value=$build_alias
-ac_cv_env_build_alias_set=${build_alias+set}
-ac_cv_env_build_alias_value=$build_alias
-ac_env_host_alias_set=${host_alias+set}
-ac_env_host_alias_value=$host_alias
-ac_cv_env_host_alias_set=${host_alias+set}
-ac_cv_env_host_alias_value=$host_alias
-ac_env_target_alias_set=${target_alias+set}
-ac_env_target_alias_value=$target_alias
-ac_cv_env_target_alias_set=${target_alias+set}
-ac_cv_env_target_alias_value=$target_alias
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
-  # Omit some internal or obsolete options to make the list less imposing.
-  # This message is too long to be a string in the A/UX 3.1 sh.
-  cat <<_ACEOF
-\`configure' configures this package to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE.  See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
-  -h, --help              display this help and exit
-      --help=short        display options specific to this package
-      --help=recursive    display the short help of all the included packages
-  -V, --version           display version information and exit
-  -q, --quiet, --silent   do not print \`checking...' messages
-      --cache-file=FILE   cache test results in FILE [disabled]
-  -C, --config-cache      alias for \`--cache-file=config.cache'
-  -n, --no-create         do not create output files
-      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
-
-_ACEOF
-
-  cat <<_ACEOF
-Installation directories:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-			  [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-			  [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
-  --bindir=DIR           user executables [EPREFIX/bin]
-  --sbindir=DIR          system admin executables [EPREFIX/sbin]
-  --libexecdir=DIR       program executables [EPREFIX/libexec]
-  --datadir=DIR          read-only architecture-independent data [PREFIX/share]
-  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
-  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
-  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
-  --libdir=DIR           object code libraries [EPREFIX/lib]
-  --includedir=DIR       C header files [PREFIX/include]
-  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
-  --infodir=DIR          info documentation [PREFIX/info]
-  --mandir=DIR           man documentation [PREFIX/man]
-_ACEOF
-
-  cat <<\_ACEOF
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
-
-  cat <<\_ACEOF
-
-_ACEOF
-fi
-
-if test "$ac_init_help" = "recursive"; then
-  # If there are subdirs, report their specific --help.
-  ac_popdir=`pwd`
-  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-    test -d $ac_dir || continue
-    ac_builddir=.
-
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
-    ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
-esac
-
-    cd $ac_dir
-    # Check for guested configure; otherwise get Cygnus style configure.
-    if test -f $ac_srcdir/configure.gnu; then
-      echo
-      $SHELL $ac_srcdir/configure.gnu  --help=recursive
-    elif test -f $ac_srcdir/configure; then
-      echo
-      $SHELL $ac_srcdir/configure  --help=recursive
-    elif test -f $ac_srcdir/configure.ac ||
-	   test -f $ac_srcdir/configure.in; then
-      echo
-      $ac_configure --help
-    else
-      echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-    fi
-    cd $ac_popdir
-  done
-fi
-
-test -n "$ac_init_help" && exit 0
-if $ac_init_version; then
-  cat <<\_ACEOF
-
-Copyright (C) 2003 Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
-  exit 0
-fi
-exec 5>config.log
-cat >&5 <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by $as_me, which was
-generated by GNU Autoconf 2.59.  Invocation command line was
-
-  $ $0 $@
-
-_ACEOF
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
-
-/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
-/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-hostinfo               = `(hostinfo) 2>/dev/null               || echo unknown`
-/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
-/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
-/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  echo "PATH: $as_dir"
-done
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_sep=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
-  for ac_arg
-  do
-    case $ac_arg in
-    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
-    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-    | -silent | --silent | --silen | --sile | --sil)
-      continue ;;
-    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-      ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-    esac
-    case $ac_pass in
-    1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
-    2)
-      ac_configure_args1="$ac_configure_args1 '$ac_arg'"
-      if test $ac_must_keep_next = true; then
-	ac_must_keep_next=false # Got value, back to normal.
-      else
-	case $ac_arg in
-	  *=* | --config-cache | -C | -disable-* | --disable-* \
-	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
-	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
-	  | -with-* | --with-* | -without-* | --without-* | --x)
-	    case "$ac_configure_args0 " in
-	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
-	    esac
-	    ;;
-	  -* ) ac_must_keep_next=true ;;
-	esac
-      fi
-      ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
-      # Get rid of the leading space.
-      ac_sep=" "
-      ;;
-    esac
-  done
-done
-$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
-$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log.  We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Be sure not to use single quotes in there, as some shells,
-# such as our DU 5.0 friend, will then `close' the trap.
-trap 'exit_status=$?
-  # Save into config.log some information that might help in debugging.
-  {
-    echo
-
-    cat <<\_ASBOX
-## ---------------- ##
-## Cache variables. ##
-## ---------------- ##
-_ASBOX
-    echo
-    # The following way of writing the cache mishandles newlines in values,
-{
-  (set) 2>&1 |
-    case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
-    *ac_space=\ *)
-      sed -n \
-	"s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
-	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
-      ;;
-    *)
-      sed -n \
-	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
-      ;;
-    esac;
-}
-    echo
-
-    cat <<\_ASBOX
-## ----------------- ##
-## Output variables. ##
-## ----------------- ##
-_ASBOX
-    echo
-    for ac_var in $ac_subst_vars
-    do
-      eval ac_val=$`echo $ac_var`
-      echo "$ac_var='"'"'$ac_val'"'"'"
-    done | sort
-    echo
-
-    if test -n "$ac_subst_files"; then
-      cat <<\_ASBOX
-## ------------- ##
-## Output files. ##
-## ------------- ##
-_ASBOX
-      echo
-      for ac_var in $ac_subst_files
-      do
-	eval ac_val=$`echo $ac_var`
-	echo "$ac_var='"'"'$ac_val'"'"'"
-      done | sort
-      echo
-    fi
-
-    if test -s confdefs.h; then
-      cat <<\_ASBOX
-## ----------- ##
-## confdefs.h. ##
-## ----------- ##
-_ASBOX
-      echo
-      sed "/^$/d" confdefs.h | sort
-      echo
-    fi
-    test "$ac_signal" != 0 &&
-      echo "$as_me: caught signal $ac_signal"
-    echo "$as_me: exit $exit_status"
-  } >&5
-  rm -f core *.core &&
-  rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
-    exit $exit_status
-     ' 0
-for ac_signal in 1 2 13 15; do
-  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo >confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
-  if test "x$prefix" != xNONE; then
-    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-  else
-    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-  fi
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-echo "$as_me: loading site script $ac_site_file" >&6;}
-    sed 's/^/| /' "$ac_site_file" >&5
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  # Some versions of bash will fail to source /dev/null (special
-  # files actually), so we avoid doing that.
-  if test -f "$cache_file"; then
-    { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-echo "$as_me: loading cache $cache_file" >&6;}
-    case $cache_file in
-      [\\/]* | ?:[\\/]* ) . $cache_file;;
-      *)                      . ./$cache_file;;
-    esac
-  fi
-else
-  { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-echo "$as_me: creating cache $cache_file" >&6;}
-  >$cache_file
-fi
-
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in `(set) 2>&1 |
-	       sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
-  eval ac_old_set=\$ac_cv_env_${ac_var}_set
-  eval ac_new_set=\$ac_env_${ac_var}_set
-  eval ac_old_val="\$ac_cv_env_${ac_var}_value"
-  eval ac_new_val="\$ac_env_${ac_var}_value"
-  case $ac_old_set,$ac_new_set in
-    set,)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,set)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,);;
-    *)
-      if test "x$ac_old_val" != "x$ac_new_val"; then
-	{ echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-	{ echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
-echo "$as_me:   former value:  $ac_old_val" >&2;}
-	{ echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
-echo "$as_me:   current value: $ac_new_val" >&2;}
-	ac_cache_corrupted=:
-      fi;;
-  esac
-  # Pass precious variables to config.status.
-  if test "$ac_new_set" = set; then
-    case $ac_new_val in
-    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-      ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
-    *) ac_arg=$ac_var=$ac_new_val ;;
-    esac
-    case " $ac_configure_args " in
-      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
-      *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-    esac
-  fi
-done
-if $ac_cache_corrupted; then
-  { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-ac_aux_dir=
-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  elif test -f $ac_dir/shtool; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/shtool install -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
-if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in
-  ./ | .// | /cC/* | \
-  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-  ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
-  /usr/ucb/* ) ;;
-  *)
-    # OSF1 and SCO ODT 3.0 have their own names for install.
-    # Don't use installbsd from OSF since it installs stuff as root
-    # by default.
-    for ac_prog in ginstall scoinst install; do
-      for ac_exec_ext in '' $ac_executable_extensions; do
-	if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
-	  if test $ac_prog = install &&
-	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  elif test $ac_prog = install &&
-	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-	    # program-specific install script used by HP pwplus--don't use.
-	    :
-	  else
-	    ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-	    break 3
-	  fi
-	fi
-      done
-    done
-    ;;
-esac
-done
-
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL=$ac_cv_path_install
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL=$ac_install_sh
-  fi
-fi
-echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-
-
-
-
-
-          ac_config_files="$ac_config_files Makefile"
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems.  If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-{
-  (set) 2>&1 |
-    case `(ac_space=' '; set | grep ac_space) 2>&1` in
-    *ac_space=\ *)
-      # `set' does not quote correctly, so add quotes (double-quote
-      # substitution turns \\\\ into \\, and sed turns \\ into \).
-      sed -n \
-	"s/'/'\\\\''/g;
-	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-      ;;
-    *)
-      # `set' quotes correctly as required by POSIX, so do not add quotes.
-      sed -n \
-	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
-      ;;
-    esac;
-} |
-  sed '
-     t clear
-     : clear
-     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
-     t end
-     /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-     : end' >>confcache
-if diff $cache_file confcache >/dev/null 2>&1; then :; else
-  if test -w $cache_file; then
-    test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
-    cat confcache >$cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
-s/:*\$(srcdir):*/:/;
-s/:*\${srcdir}:*/:/;
-s/:*@srcdir@:*/:/;
-s/^\([^=]*=[	 ]*\):*/\1/;
-s/:*$//;
-s/^[^=]*=[	 ]*$//;
-}'
-fi
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-#
-# If the first sed substitution is executed (which looks for macros that
-# take arguments), then we branch to the quote section.  Otherwise,
-# look for a macro that doesn't take arguments.
-cat >confdef2opt.sed <<\_ACEOF
-t clear
-: clear
-s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*([^)]*)\)[	 ]*\(.*\),-D\1=\2,g
-t quote
-s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\),-D\1=\2,g
-t quote
-d
-: quote
-s,[	 `~#$^&*(){}\\|;'"<>?],\\&,g
-s,\[,\\&,g
-s,\],\\&,g
-s,\$,$$,g
-p
-_ACEOF
-# We use echo to avoid assuming a particular line-breaking character.
-# The extra dot is to prevent the shell from consuming trailing
-# line-breaks from the sub-command output.  A line-break within
-# single-quotes doesn't work because, if this script is created in a
-# platform that uses two characters for line-breaks (e.g., DOS), tr
-# would break.
-ac_LF_and_DOT=`echo; echo .`
-DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
-rm -f confdef2opt.sed
-
-
-ac_libobjs=
-ac_ltlibobjs=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
-  # 1. Remove the extension, and $U if already installed.
-  ac_i=`echo "$ac_i" |
-	 sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
-  # 2. Add them.
-  ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
-  ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
-
-LTLIBOBJS=$ac_ltlibobjs
-
-
-
-: ${CONFIG_STATUS=./config.status}
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-## --------------------- ##
-## M4sh Initialization.  ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-  set -o posix
-fi
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  as_unset=unset
-else
-  as_unset=false
-fi
-
-
-# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    $as_unset $as_var
-  fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)$' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\/\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-
-
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
-fi
-
-
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
-  # Find who we are.  Look in the path if we contain no path at all
-  # relative or not.
-  case $0 in
-    *[\\/]* ) as_myself=$0 ;;
-    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
-       ;;
-  esac
-  # We did not find ourselves, most probably we were run as `sh COMMAND'
-  # in which case we are not to be found in the path.
-  if test "x$as_myself" = x; then
-    as_myself=$0
-  fi
-  if test ! -f "$as_myself"; then
-    { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
-   { (exit 1); exit 1; }; }
-  fi
-  case $CONFIG_SHELL in
-  '')
-    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for as_base in sh bash ksh sh5; do
-	 case $as_dir in
-	 /*)
-	   if ("$as_dir/$as_base" -c '
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-	     CONFIG_SHELL=$as_dir/$as_base
-	     export CONFIG_SHELL
-	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-	   fi;;
-	 esac
-       done
-done
-;;
-  esac
-
-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-  # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line before each line; the second 'sed' does the real
-  # work.  The second script uses 'N' to pair each line-number line
-  # with the numbered line, and appends trailing '-' during
-  # substitution so that $LINENO is not a special case at line end.
-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
-  sed '=' <$as_myself |
-    sed '
-      N
-      s,$,-,
-      : loop
-      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-      t loop
-      s,-$,,
-      s,^['$as_cr_digits']*\n,,
-    ' >$as_me.lineno &&
-  chmod +x $as_me.lineno ||
-    { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
-   { (exit 1); exit 1; }; }
-
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensible to this).
-  . ./$as_me.lineno
-  # Exit status is that of the last command.
-  exit
-}
-
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-  *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T='	' ;;
-  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  # We could just check for DJGPP; but this test a) works b) is more generic
-  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-  if test -f conf$$.exe; then
-    # Don't use ln at all; we don't have any links
-    as_ln_s='cp -p'
-  else
-    as_ln_s='ln -s'
-  fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
-else
-  as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.file
-
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p=:
-else
-  test -d ./-p && rmdir ./-p
-  as_mkdir_p=false
-fi
-
-as_executable_p="test -f"
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" 	$as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
-exec 6>&1
-
-# Open the log real soon, to keep \$[0] and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.  Logging --version etc. is OK.
-exec 5>>config.log
-{
-  echo
-  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-} >&5
-cat >&5 <<_CSEOF
-
-This file was extended by $as_me, which was
-generated by GNU Autoconf 2.59.  Invocation command line was
-
-  CONFIG_FILES    = $CONFIG_FILES
-  CONFIG_HEADERS  = $CONFIG_HEADERS
-  CONFIG_LINKS    = $CONFIG_LINKS
-  CONFIG_COMMANDS = $CONFIG_COMMANDS
-  $ $0 $@
-
-_CSEOF
-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
-echo >&5
-_ACEOF
-
-# Files that config.status was made for.
-if test -n "$ac_config_files"; then
-  echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_headers"; then
-  echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_links"; then
-  echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_commands"; then
-  echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
-
-Usage: $0 [OPTIONS] [FILE]...
-
-  -h, --help       print this help, then exit
-  -V, --version    print version number, then exit
-  -q, --quiet      do not print progress messages
-  -d, --debug      don't remove temporary files
-      --recheck    update $as_me by reconfiguring in the same conditions
-  --file=FILE[:TEMPLATE]
-		   instantiate the configuration file FILE
-
-Configuration files:
-$config_files
-
-Report bugs to <bug-autoconf@gnu.org>."
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-ac_cs_version="\\
-config.status
-configured by $0, generated by GNU Autoconf 2.59,
-  with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
-
-Copyright (C) 2003 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-srcdir=$srcdir
-INSTALL="$INSTALL"
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If no file are specified by the user, then we need to provide default
-# value.  By we need to know if files were specified by the user.
-ac_need_defaults=:
-while test $# != 0
-do
-  case $1 in
-  --*=*)
-    ac_option=`expr "x$1" : 'x\([^=]*\)='`
-    ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
-    ac_shift=:
-    ;;
-  -*)
-    ac_option=$1
-    ac_optarg=$2
-    ac_shift=shift
-    ;;
-  *) # This is not an option, so the user has probably given explicit
-     # arguments.
-     ac_option=$1
-     ac_need_defaults=false;;
-  esac
-
-  case $ac_option in
-  # Handling of the options.
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    ac_cs_recheck=: ;;
-  --version | --vers* | -V )
-    echo "$ac_cs_version"; exit 0 ;;
-  --he | --h)
-    # Conflict between --help and --header
-    { { echo "$as_me:$LINENO: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2;}
-   { (exit 1); exit 1; }; };;
-  --help | --hel | -h )
-    echo "$ac_cs_usage"; exit 0 ;;
-  --debug | --d* | -d )
-    debug=: ;;
-  --file | --fil | --fi | --f )
-    $ac_shift
-    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
-    ac_need_defaults=false;;
-  --header | --heade | --head | --hea )
-    $ac_shift
-    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
-    ac_need_defaults=false;;
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil | --si | --s)
-    ac_cs_silent=: ;;
-
-  # This is an error.
-  -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2;}
-   { (exit 1); exit 1; }; } ;;
-
-  *) ac_config_targets="$ac_config_targets $1" ;;
-
-  esac
-  shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
-  exec 6>/dev/null
-  ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-if \$ac_cs_recheck; then
-  echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-  exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-fi
-
-_ACEOF
-
-
-
-
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-for ac_config_target in $ac_config_targets
-do
-  case "$ac_config_target" in
-  # Handling of arguments.
-  "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
-   { (exit 1); exit 1; }; };;
-  esac
-done
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used.  Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
-  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-fi
-
-# Have a temporary directory for convenience.  Make it in the build tree
-# simply because there is no reason to put it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Create a temporary directory, and hook for its removal unless debugging.
-$debug ||
-{
-  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
-  trap '{ (exit 1); exit 1; }' 1 2 13 15
-}
-
-# Create a (secure) tmp directory for tmp files.
-
-{
-  tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
-  test -n "$tmp" && test -d "$tmp"
-}  ||
-{
-  tmp=./confstat$$-$RANDOM
-  (umask 077 && mkdir $tmp)
-} ||
-{
-   echo "$me: cannot create a temporary directory in ." >&2
-   { (exit 1); exit 1; }
-}
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-
-#
-# CONFIG_FILES section.
-#
-
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
-if test -n "\$CONFIG_FILES"; then
-  # Protect against being on the right side of a sed subst in config.status.
-  sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
-   s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
-s,@SHELL@,$SHELL,;t t
-s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
-s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
-s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
-s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
-s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
-s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
-s,@exec_prefix@,$exec_prefix,;t t
-s,@prefix@,$prefix,;t t
-s,@program_transform_name@,$program_transform_name,;t t
-s,@bindir@,$bindir,;t t
-s,@sbindir@,$sbindir,;t t
-s,@libexecdir@,$libexecdir,;t t
-s,@datadir@,$datadir,;t t
-s,@sysconfdir@,$sysconfdir,;t t
-s,@sharedstatedir@,$sharedstatedir,;t t
-s,@localstatedir@,$localstatedir,;t t
-s,@libdir@,$libdir,;t t
-s,@includedir@,$includedir,;t t
-s,@oldincludedir@,$oldincludedir,;t t
-s,@infodir@,$infodir,;t t
-s,@mandir@,$mandir,;t t
-s,@build_alias@,$build_alias,;t t
-s,@host_alias@,$host_alias,;t t
-s,@target_alias@,$target_alias,;t t
-s,@DEFS@,$DEFS,;t t
-s,@ECHO_C@,$ECHO_C,;t t
-s,@ECHO_N@,$ECHO_N,;t t
-s,@ECHO_T@,$ECHO_T,;t t
-s,@LIBS@,$LIBS,;t t
-s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
-s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
-s,@INSTALL_DATA@,$INSTALL_DATA,;t t
-s,@datarootdir@,$datarootdir,;t t
-s,@docdir@,$docdir,;t t
-s,@htmldir@,$htmldir,;t t
-s,@pdfdir@,$pdfdir,;t t
-s,@LIBOBJS@,$LIBOBJS,;t t
-s,@LTLIBOBJS@,$LTLIBOBJS,;t t
-CEOF
-
-_ACEOF
-
-  cat >>$CONFIG_STATUS <<\_ACEOF
-  # Split the substitutions into bite-sized pieces for seds with
-  # small command number limits, like on Digital OSF/1 and HP-UX.
-  ac_max_sed_lines=48
-  ac_sed_frag=1 # Number of current file.
-  ac_beg=1 # First line for current file.
-  ac_end=$ac_max_sed_lines # Line after last line for current file.
-  ac_more_lines=:
-  ac_sed_cmds=
-  while $ac_more_lines; do
-    if test $ac_beg -gt 1; then
-      sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    else
-      sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    fi
-    if test ! -s $tmp/subs.frag; then
-      ac_more_lines=false
-    else
-      # The purpose of the label and of the branching condition is to
-      # speed up the sed processing (if there are no `@' at all, there
-      # is no need to browse any of the substitutions).
-      # These are the two extra sed commands mentioned above.
-      (echo ':t
-  /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
-      if test -z "$ac_sed_cmds"; then
-	ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
-      else
-	ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
-      fi
-      ac_sed_frag=`expr $ac_sed_frag + 1`
-      ac_beg=$ac_end
-      ac_end=`expr $ac_end + $ac_max_sed_lines`
-    fi
-  done
-  if test -z "$ac_sed_cmds"; then
-    ac_sed_cmds=cat
-  fi
-fi # test -n "$CONFIG_FILES"
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case $ac_file in
-  - | *:- | *:-:* ) # input from stdin
-	cat >$tmp/stdin
-	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  * )   ac_file_in=$ac_file.in ;;
-  esac
-
-  # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
-  ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$ac_file" : 'X\(//\)[^/]' \| \
-	 X"$ac_file" : 'X\(//\)$' \| \
-	 X"$ac_file" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-  { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
-
-  ac_builddir=.
-
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
-    ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
-esac
-
-
-  case $INSTALL in
-  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-  *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
-  esac
-
-  if test x"$ac_file" != x-; then
-    { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-    rm -f "$ac_file"
-  fi
-  # Let's still pretend it is `configure' which instantiates (i.e., don't
-  # use $as_me), people would be surprised to read:
-  #    /* config.h.  Generated by config.status.  */
-  if test x"$ac_file" = x-; then
-    configure_input=
-  else
-    configure_input="$ac_file.  "
-  fi
-  configure_input=$configure_input"Generated from `echo $ac_file_in |
-				     sed 's,.*/,,'` by configure."
-
-  # First look for the input files in the build tree, otherwise in the
-  # src tree.
-  ac_file_inputs=`IFS=:
-    for f in $ac_file_in; do
-      case $f in
-      -) echo $tmp/stdin ;;
-      [\\/$]*)
-	 # Absolute (can't be DOS-style, as IFS=:)
-	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 echo "$f";;
-      *) # Relative
-	 if test -f "$f"; then
-	   # Build tree
-	   echo "$f"
-	 elif test -f "$srcdir/$f"; then
-	   # Source tree
-	   echo "$srcdir/$f"
-	 else
-	   # /dev/null tree
-	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 fi;;
-      esac
-    done` || { (exit 1); exit 1; }
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-  sed "$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s,@configure_input@,$configure_input,;t t
-s,@srcdir@,$ac_srcdir,;t t
-s,@abs_srcdir@,$ac_abs_srcdir,;t t
-s,@top_srcdir@,$ac_top_srcdir,;t t
-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
-s,@builddir@,$ac_builddir,;t t
-s,@abs_builddir@,$ac_abs_builddir,;t t
-s,@top_builddir@,$ac_top_builddir,;t t
-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
-s,@INSTALL@,$ac_INSTALL,;t t
-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
-  rm -f $tmp/stdin
-  if test x"$ac_file" != x-; then
-    mv $tmp/out $ac_file
-  else
-    cat $tmp/out
-    rm -f $tmp/out
-  fi
-
-done
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-{ (exit 0); exit 0; }
-_ACEOF
-chmod +x $CONFIG_STATUS
-ac_clean_files=$ac_clean_files_save
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded.  So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status.  When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
-  ac_cs_success=:
-  ac_config_status_args=
-  test "$silent" = yes &&
-    ac_config_status_args="$ac_config_status_args --quiet"
-  exec 5>/dev/null
-  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
-  exec 5>>config.log
-  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
-  # would make configure fail if this is the last instruction.
-  $ac_cs_success || { (exit 1); exit 1; }
-fi
-
diff --git a/etc/configure.in b/etc/configure.in
deleted file mode 100644
index 7285d372e..000000000
--- a/etc/configure.in
+++ /dev/null
@@ -1,12 +0,0 @@
-dnl Process this file with autoconf to produce a configure script.
-AC_PREREQ(2.5)
-AC_INIT(Makefile.in)
-
-AC_PROG_INSTALL
-
-AC_SUBST(datarootdir)
-AC_SUBST(docdir)
-AC_SUBST(htmldir)
-AC_SUBST(pdfdir)
-
-AC_OUTPUT(Makefile)
diff --git a/etc/configure.texi b/etc/configure.texi
deleted file mode 100644
index 58c528548..000000000
--- a/etc/configure.texi
+++ /dev/null
@@ -1,2646 +0,0 @@
-\input texinfo
-@c %**start of header
-@setfilename configure.info
-@settitle The GNU configure and build system
-@setchapternewpage off
-@c %**end of header
-
-@dircategory GNU admin
-@direntry
-* configure: (configure).	The GNU configure and build system
-@end direntry
-
-@ifnottex
-This file documents the GNU configure and build system.
-
-Copyright (C) 1998 Cygnus Solutions.
-
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-
-@ignore
-Permission is granted to process this file through TeX and print the
-results, provided the printed document carries copying permission
-notice identical to this one except for the removal of this paragraph
-
-
-@end ignore
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided that the entire
-resulting derived work is distributed under the terms of a permission
-notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions,
-except that this permission notice may be stated in a translation approved
-by the Foundation.
-@end ifnottex
-
-@titlepage
-@title The GNU configure and build system
-@author Ian Lance Taylor
-
-@page
-@vskip 0pt plus 1filll
-Copyright @copyright{} 1998 Cygnus Solutions
-
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided that the entire
-resulting derived work is distributed under the terms of a permission
-notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions,
-except that this permission notice may be stated in a translation
-approved by the Free Software Foundation.
-@end titlepage
-
-@ifnottex
-@node Top
-@top GNU configure and build system
-
-The GNU configure and build system.
-
-@menu
-* Introduction::		Introduction.
-* Getting Started::		Getting Started.
-* Files::			Files.
-* Configuration Names::		Configuration Names.
-* Cross Compilation Tools::	Cross Compilation Tools.
-* Canadian Cross::		Canadian Cross.
-* Cygnus Configure::		Cygnus Configure.
-* Multilibs::			Multilibs.
-* FAQ::				Frequently Asked Questions.
-* Index::			Index.
-@end menu
-
-@end ifnottex
-
-@node Introduction
-@chapter Introduction
-
-This document describes the GNU configure and build systems.  It
-describes how autoconf, automake, libtool, and make fit together.  It
-also includes a discussion of the older Cygnus configure system.
-
-This document does not describe in detail how to use each of the tools;
-see the respective manuals for that.  Instead, it describes which files
-the developer must write, which files are machine generated and how they
-are generated, and where certain common problems should be addressed.
-
-@ifnothtml
-This document draws on several sources, including the autoconf manual by
-David MacKenzie (@pxref{Top, , autoconf overview, autoconf, Autoconf}),
-the automake manual by David MacKenzie and Tom Tromey (@pxref{Top, ,
-automake overview, automake, GNU Automake}), the libtool manual by
-Gordon Matzigkeit (@pxref{Top, , libtool overview, libtool, GNU
-libtool}), and the Cygnus configure manual by K. Richard Pixley.
-@end ifnothtml
-@ifhtml
-This document draws on several sources, including
-@uref{http://www.delorie.com/gnu/docs/autoconf/autoconf_toc.html, the
-autoconf manual} by David MacKenzie,
-@uref{http://www.delorie.com/gnu/docs/automake/automake_toc.html, the
-automake manual} by David MacKenzie and Tom Tromey,
-@uref{http://www.delorie.com/gnu/docs/libtool/libtool_toc.html, the
-libtool manual} by Gordon Matzigkeit, and the Cygnus configure manual by
-K. Richard Pixley.
-@end ifhtml
-
-@menu
-* Goals::			Goals.
-* Tools::			The tools.
-* History::			History.
-* Building::			Building.
-@end menu
-
-@node Goals
-@section Goals
-@cindex goals
-
-The GNU configure and build system has two main goals.
-
-The first is to simplify the development of portable programs.  The
-system permits the developer to concentrate on writing the program,
-simplifying many details of portability across Unix and even Windows
-systems, and permitting the developer to describe how to build the
-program using simple rules rather than complex Makefiles.
-
-The second is to simplify the building of programs distributed as source
-code.  All programs are built using a simple, standardized, two step
-process.  The program builder need not install any special tools in
-order to build the program.
-
-@node Tools
-@section Tools
-
-The GNU configure and build system is comprised of several different
-tools.  Program developers must build and install all of these tools.
-
-People who just want to build programs from distributed sources normally
-do not need any special tools beyond a Unix shell, a make program, and a
-C compiler.
-
-@table @asis
-@item autoconf
-provides a general portability framework, based on testing the features
-of the host system at build time.
-@item automake
-a system for describing how to build a program, permitting the developer
-to write a simplified @file{Makefile}.
-@item libtool
-a standardized approach to building shared libraries.
-@item gettext
-provides a framework for translation of text messages into other
-languages; not really discussed in this document.
-@item m4
-autoconf requires the GNU version of m4; the standard Unix m4 does not
-suffice.
-@item perl
-automake requires perl.
-@end table
-
-@node History
-@section History
-@cindex history
-
-This is a very brief and probably inaccurate history.
-
-As the number of Unix variants increased during the 1980s, it became
-harder to write programs which could run on all variants.  While it was
-often possible to use @code{#ifdef} to identify particular systems,
-developers frequently did not have access to every system, and the
-characteristics of some systems changed from version to version.
-
-By 1992, at least three different approaches had been developed:
-@itemize @bullet
-@item
-The Metaconfig program, by Larry Wall, Harlan Stenn, and Raphael
-Manfredi.
-@item
-The Cygnus configure script, by K. Richard Pixley, and the gcc configure
-script, by Richard Stallman.  These use essentially the same approach,
-and the developers communicated regularly.
-@item
-The autoconf program, by David MacKenzie.
-@end itemize
-
-The Metaconfig program is still used for Perl and a few other programs.
-It is part of the Dist package.  I do not know if it is being developed.
-
-In 1994, David MacKenzie and others modified autoconf to incorporate all
-the features of Cygnus configure.  Since then, there has been a slow but
-steady conversion of GNU programs from Cygnus configure to autoconf. gcc
-has been converted, eliminating the gcc configure script.
-
-GNU autoconf was regularly maintained until late 1996.  As of this
-writing in June, 1998, it has no public maintainer.
-
-Most programs are built using the make program, which requires the
-developer to write Makefiles describing how to build the programs.
-Since most programs are built in pretty much the same way, this led to a
-lot of duplication.
-
-The X Window system is built using the imake tool, which uses a database
-of rules to eliminate the duplication.  However, building a tool which
-was developed using imake requires that the builder have imake
-installed, violating one of the goals of the GNU system.
-
-The new BSD make provides a standard library of Makefile fragments,
-which permits developers to write very simple Makefiles.  However, this
-requires that the builder install the new BSD make program.
-
-In 1994, David MacKenzie wrote the first version of automake, which
-permitted writing a simple build description which was converted into a
-Makefile which could be used by the standard make program.  In 1995, Tom
-Tromey completely rewrote automake in Perl, and he continues to enhance
-it.
-
-Various free packages built libraries, and by around 1995 several
-included support to build shared libraries on various platforms.
-However, there was no consistent approach.  In early 1996, Gordon
-Matzigkeit began working on libtool, which provided a standardized
-approach to building shared libraries.  This was integrated into
-automake from the start.
-
-The development of automake and libtool was driven by the GNITS project,
-a group of GNU maintainers who designed standardized tools to help meet
-the GNU coding standards.
-
-@node Building
-@section Building
-
-Most readers of this document should already know how to build a tool by
-running @samp{configure} and @samp{make}.  This section may serve as a
-quick introduction or reminder.
-
-Building a tool is normally as simple as running @samp{configure}
-followed by @samp{make}.  You should normally run @samp{configure} from
-an empty directory, using some path to refer to the @samp{configure}
-script in the source directory.  The directory in which you run
-@samp{configure} is called the @dfn{object directory}.
-
-In order to use a object directory which is different from the source
-directory, you must be using the GNU version of @samp{make}, which has
-the required @samp{VPATH} support.  Despite this restriction, using a
-different object directory is highly recommended:
-@itemize @bullet
-@item
-It keeps the files generated during the build from cluttering up your
-sources.
-@item 
-It permits you to remove the built files by simply removing the entire
-build directory.
-@item
-It permits you to build from the same sources with several sets of
-configure options simultaneously.
-@end itemize
-
-If you don't have GNU @samp{make}, you will have to run @samp{configure}
-in the source directory.  All GNU packages should support this; in
-particular, GNU packages should not assume the presence of GNU
-@samp{make}.
-
-After running @samp{configure}, you can build the tools by running
-@samp{make}.
-
-To install the tools, run @samp{make install}.  Installing the tools
-will copy the programs and any required support files to the
-@dfn{installation directory}.  The location of the installation
-directory is controlled by @samp{configure} options, as described below.
-
-In the Cygnus tree at present, the info files are built and installed as
-a separate step.  To build them, run @samp{make info}.  To install them,
-run @samp{make install-info}. The equivalent html files are also built
-and installed in a separate step. To build the html files, run
-@samp{make html}. To install the html files run @samp{make install-html}.
-
-All @samp{configure} scripts support a wide variety of options.  The
-most interesting ones are @samp{--with} and @samp{--enable} options
-which are generally specific to particular tools.  You can usually use
-the @samp{--help} option to get a list of interesting options for a
-particular configure script.
-
-The only generic options you are likely to use are the @samp{--prefix}
-and @samp{--exec-prefix} options.  These options are used to specify the
-installation directory.
-
-The directory named by the @samp{--prefix} option will hold machine
-independent files such as info files.
-
-The directory named by the @samp{--exec-prefix} option, which is
-normally a subdirectory of the @samp{--prefix} directory, will hold
-machine dependent files such as executables.
-
-The default for @samp{--prefix} is @file{/usr/local}.  The default for
-@samp{--exec-prefix} is the value used for @samp{--prefix}.
-
-The convention used in Cygnus releases is to use a @samp{--prefix}
-option of @file{/usr/cygnus/@var{release}}, where @var{release} is the
-name of the release, and to use a @samp{--exec-prefix} option of
-@file{/usr/cygnus/@var{release}/H-@var{host}}, where @var{host} is the
-configuration name of the host system (@pxref{Configuration Names}).
-
-Do not use either the source or the object directory as the installation
-directory.  That will just lead to confusion.
-
-@node Getting Started
-@chapter Getting Started
-
-To start using the GNU configure and build system with your software
-package, you must write three files, and you must run some tools to
-manually generate additional files.
-
-@menu
-* Write configure.in::		Write configure.in.
-* Write Makefile.am::		Write Makefile.am.
-* Write acconfig.h::		Write acconfig.h.
-* Generate files::		Generate files.
-* Getting Started Example::	Example.
-@end menu
-
-@node Write configure.in
-@section Write configure.in
-@cindex @file{configure.in}, writing
-
-You must first write the file @file{configure.in}.  This is an autoconf
-input file, and the autoconf manual describes in detail what this file
-should look like.
-
-You will write tests in your @file{configure.in} file to check for
-conditions that may change from one system to another, such as the
-presence of particular header files or functions.
-
-For example, not all systems support the @samp{gettimeofday} function.
-If you want to use the @samp{gettimeofday} function when it is
-available, and to use some other function when it is not, you would
-check for this by putting @samp{AC_CHECK_FUNCS(gettimeofday)} in
-@file{configure.in}.
-
-When the configure script is run at build time, this will arrange to
-define the preprocessor macro @samp{HAVE_GETTIMEOFDAY} to the value 1 if
-the @samp{gettimeofday} function is available, and to not define the
-macro at all if the function is not available.  Your code can then use
-@samp{#ifdef} to test whether it is safe to call @samp{gettimeofday}.
-
-If you have an existing body of code, the @samp{autoscan} program may
-help identify potential portability problems, and hence configure tests
-that you will want to use.
-@ifnothtml
-@xref{Invoking autoscan, , , autoconf, the autoconf manual}.
-@end ifnothtml
-@ifhtml
-See @uref{http://www.delorie.com/gnu/docs/autoconf/autoconf_4.html, the
-autoscan documentation}.
-@end ifhtml
-
-Another handy tool for an existing body of code is @samp{ifnames}.  This
-will show you all the preprocessor conditionals that the code already
-uses.
-@ifnothtml
-@xref{Invoking ifnames, , , autoconf, the autoconf manual}.
-@end ifnothtml
-@ifhtml
-See @uref{http://www.delorie.com/gnu/docs/autoconf/autoconf_5.html, the
-ifnames documentation}.
-@end ifhtml
-
-Besides the portability tests which are specific to your particular
-package, every @file{configure.in} file should contain the following
-macros.
-
-@table @samp
-@item AC_INIT
-@cindex @samp{AC_INIT}
-This macro takes a single argument, which is the name of a file in your
-package.  For example, @samp{AC_INIT(foo.c)}.
-
-@item AC_PREREQ(@var{VERSION})
-@cindex @samp{AC_PREREQ}
-This macro is optional.  It may be used to indicate the version of
-@samp{autoconf} that you are using.  This will prevent users from
-running an earlier version of @samp{autoconf} and perhaps getting an
-invalid @file{configure} script.  For example, @samp{AC_PREREQ(2.12)}.
-
-@item AM_INIT_AUTOMAKE
-@cindex @samp{AM_INIT_AUTOMAKE}
-This macro takes two arguments: the name of the package, and a version
-number.  For example, @samp{AM_INIT_AUTOMAKE(foo, 1.0)}.  (This macro is
-not needed if you are not using automake).
-
-@item AM_CONFIG_HEADER
-@cindex @samp{AM_CONFIG_HEADER}
-This macro names the header file which will hold the preprocessor macro
-definitions at run time.  Normally this should be @file{config.h}.  Your
-sources would then use @samp{#include "config.h"} to include it.
-
-This macro may optionally name the input file for that header file; by
-default, this is @file{config.h.in}, but that file name works poorly on
-DOS filesystems.  Therefore, it is often better to name it explicitly as
-@file{config.in}.
-
-This is what you should normally put in @file{configure.in}:
-@example
-AM_CONFIG_HEADER(config.h:config.in)
-@end example
-
-@cindex @samp{AC_CONFIG_HEADER}
-(If you are not using automake, use @samp{AC_CONFIG_HEADER} rather than
-@samp{AM_CONFIG_HEADER}).
-
-@item AM_MAINTAINER_MODE
-@cindex @samp{AM_MAINTAINER_MODE}
-This macro always appears in Cygnus configure scripts.  Other programs
-may or may not use it.
-
-If this macro is used, the @samp{--enable-maintainer-mode} option is
-required to enable automatic rebuilding of generated files used by the
-configure system.  This of course requires that developers be aware of,
-and use, that option.
-
-If this macro is not used, then the generated files will always be
-rebuilt automatically.  This will cause problems if the wrong versions
-of autoconf, automake, or others are in the builder's @samp{PATH}.
-
-(If you are not using automake, you do not need to use this macro).
-
-@item AC_EXEEXT
-@cindex @samp{AC_EXEEXT}
-@cindex @samp{AM_EXEEXT}
-Either this macro or @samp{AM_EXEEXT} always appears in Cygnus configure
-files.  Other programs may or may not use one of them.
-
-This macro looks for the executable suffix used on the host system.  On
-Unix systems, this is the empty string.  On Windows systems, this is
-@samp{.exe}.  This macro directs automake to use the executable suffix
-as appropriate when creating programs.  This macro does not take any
-arguments.
-
-The @samp{AC_EXEEXT} form is new, and is part of a Cygnus patch to
-autoconf to support compiling with Visual C++.  Older programs use
-@samp{AM_EXEEXT} instead.
-
-(Programs which do not use automake use neither @samp{AC_EXEEXT} nor
-@samp{AM_EXEEXT}).
-
-@item AC_PROG_CC
-@cindex @samp{AC_PROG_CC}
-If you are writing C code, you will normally want to use this macro.  It
-locates the C compiler to use.  It does not take any arguments.
-
-However, if this @file{configure.in} file is for a library which is to
-be compiled by a cross compiler which may not fully work, then you will
-not want to use @samp{AC_PROG_CC}.  Instead, you will want to use a
-variant which does not call the macro @samp{AC_PROG_CC_WORKS}.  Examples
-can be found in various @file{configure.in} files for libraries that are
-compiled with cross compilers, such as libiberty or libgloss.  This is
-essentially a bug in autoconf, and there will probably be a better
-workaround at some point.
-
-@item AC_PROG_CXX
-@cindex @samp{AC_PROG_CXX}
-If you are writing C++ code, you will want to use this macro.  It
-locates the C++ compiler to use.  It does not take any arguments.  The
-same cross compiler comments apply as for @samp{AC_PROG_CC}.
-
-@item AM_PROG_LIBTOOL
-@cindex @samp{AM_PROG_LIBTOOL}
-If you want to build libraries, and you want to permit them to be
-shared, or you want to link against libraries which were built using
-libtool, then you will need this macro.  This macro is required in order
-to use libtool.
-
-@cindex @samp{AM_DISABLE_SHARED}
-By default, this will cause all libraries to be built as shared
-libraries.  To prevent this--to change the default--use
-@samp{AM_DISABLE_SHARED} before @samp{AM_PROG_LIBTOOL}.  The configure
-options @samp{--enable-shared} and @samp{--disable-shared} may be used
-to override the default at build time.
-
-@item AC_DEFINE(_GNU_SOURCE)
-@cindex @samp{_GNU_SOURCE}
-GNU packages should normally include this line before any other feature
-tests.  This defines the macro @samp{_GNU_SOURCE} when compiling, which
-directs the libc header files to provide the standard GNU system
-interfaces including all GNU extensions.  If this macro is not defined,
-certain GNU extensions may not be available.
-
-@item AC_OUTPUT
-@cindex @samp{AC_OUTPUT}
-This macro takes a list of file names which the configure process should
-produce.  This is normally a list of one or more @file{Makefile} files
-in different directories.  If your package lives entirely in a single
-directory, you would use simply @samp{AC_OUTPUT(Makefile)}.  If you also
-have, for example, a @file{lib} subdirectory, you would use
-@samp{AC_OUTPUT(Makefile lib/Makefile)}.
-@end table
-
-If you want to use locally defined macros in your @file{configure.in}
-file, then you will need to write a @file{acinclude.m4} file which
-defines them (if not using automake, this file is called
-@file{aclocal.m4}).  Alternatively, you can put separate macros in an
-@file{m4} subdirectory, and put @samp{ACLOCAL_AMFLAGS = -I m4} in your
-@file{Makefile.am} file so that the @samp{aclocal} program will be able
-to find them.
-
-The different macro prefixes indicate which tool defines the macro.
-Macros which start with @samp{AC_} are part of autoconf.  Macros which
-start with @samp{AM_} are provided by automake or libtool.
-
-@node Write Makefile.am
-@section Write Makefile.am
-@cindex @file{Makefile.am}, writing
-
-You must write the file @file{Makefile.am}.  This is an automake input
-file, and the automake manual describes in detail what this file should
-look like.
-
-The automake commands in @file{Makefile.am} mostly look like variable
-assignments in a @file{Makefile}.  automake recognizes special variable
-names, and automatically add make rules to the output as needed.
-
-There will be one @file{Makefile.am} file for each directory in your
-package.  For each directory with subdirectories, the @file{Makefile.am}
-file should contain the line
-@smallexample
-SUBDIRS = @var{dir} @var{dir} @dots{}
-@end smallexample
-@noindent
-where each @var{dir} is the name of a subdirectory.
-
-For each @file{Makefile.am}, there should be a corresponding
-@file{Makefile} in the @samp{AC_OUTPUT} macro in @file{configure.in}.
-
-Every @file{Makefile.am} written at Cygnus should contain the line
-@smallexample
-AUTOMAKE_OPTIONS = cygnus
-@end smallexample
-@noindent
-This puts automake into Cygnus mode.  See the automake manual for
-details.
-
-You may to include the version number of @samp{automake} that you are
-using on the @samp{AUTOMAKE_OPTIONS} line.  For example,
-@smallexample
-AUTOMAKE_OPTIONS = cygnus 1.3
-@end smallexample
-@noindent
-This will prevent users from running an earlier version of
-@samp{automake} and perhaps getting an invalid @file{Makefile.in}.
-
-If your package builds a program, then in the directory where that
-program is built you will normally want a line like
-@smallexample
-bin_PROGRAMS = @var{program}
-@end smallexample
-@noindent
-where @var{program} is the name of the program.  You will then want a
-line like
-@smallexample
-@var{program}_SOURCES = @var{file} @var{file} @dots{}
-@end smallexample
-@noindent
-where each @var{file} is the name of a source file to link into the
-program (e.g., @samp{foo.c}).
-
-If your package builds a library, and you do not want the library to
-ever be built as a shared library, then in the directory where that
-library is built you will normally want a line like
-@smallexample
-lib_LIBRARIES = lib@var{name}.a
-@end smallexample
-@noindent
-where @samp{lib@var{name}.a} is the name of the library.  You will then
-want a line like
-@smallexample
-lib@var{name}_a_SOURCES = @var{file} @var{file} @dots{}
-@end smallexample
-@noindent
-where each @var{file} is the name of a source file to add to the
-library.
-
-If your package builds a library, and you want to permit building the
-library as a shared library, then in the directory where that library is
-built you will normally want a line like
-@smallexample
-lib_LTLIBRARIES = lib@var{name}.la
-@end smallexample
-The use of @samp{LTLIBRARIES}, and the @samp{.la} extension, indicate a
-library to be built using libtool.  As usual, you will then want a line
-like
-@smallexample
-lib@var{name}_la_SOURCES = @var{file} @var{file} @dots{}
-@end smallexample
-
-The strings @samp{bin} and @samp{lib} that appear above in
-@samp{bin_PROGRAMS} and @samp{lib_LIBRARIES} are not arbitrary.  They
-refer to particular directories, which may be set by the @samp{--bindir}
-and @samp{--libdir} options to @file{configure}.  If those options are
-not used, the default values are based on the @samp{--prefix} or
-@samp{--exec-prefix} options to @file{configure}.  It is possible to use
-other names if the program or library should be installed in some other
-directory.
-
-The @file{Makefile.am} file may also contain almost anything that may
-appear in a normal @file{Makefile}.  automake also supports many other
-special variables, as well as conditionals.
-
-See the automake manual for more information.
-
-@node Write acconfig.h
-@section Write acconfig.h
-@cindex @file{acconfig.h}, writing
-
-If you are generating a portability header file, (i.e., you are using
-@samp{AM_CONFIG_HEADER} in @file{configure.in}), then you will have to
-write a @file{acconfig.h} file.  It will have to contain the following
-lines.
-
-@smallexample
-/* Name of package.  */
-#undef PACKAGE
-
-/* Version of package.  */
-#undef VERSION
-@end smallexample
-
-This requirement is really a bug in the system, and the requirement may
-be eliminated at some later date.
-
-The @file{acconfig.h} file will also similar comment and @samp{#undef}
-lines for any unusual macros in the @file{configure.in} file, including
-any macro which appears in a @samp{AC_DEFINE} macro.
-
-In particular, if you are writing a GNU package and therefore include
-@samp{AC_DEFINE(_GNU_SOURCE)} in @file{configure.in} as suggested above,
-you will need lines like this in @file{acconfig.h}:
-@smallexample
-/* Enable GNU extensions.  */
-#undef _GNU_SOURCE
-@end smallexample
-
-Normally the @samp{autoheader} program will inform you of any such
-requirements by printing an error message when it is run.  However, if
-you do anything particular odd in your @file{configure.in} file, you
-will have to make sure that the right entries appear in
-@file{acconfig.h}, since otherwise the results of the tests may not be
-available in the @file{config.h} file which your code will use.
-
-(Thee @samp{PACKAGE} and @samp{VERSION} lines are not required if you
-are not using automake, and in that case you may not need a
-@file{acconfig.h} file at all).
-
-@node Generate files
-@section Generate files
-
-Once you have written @file{configure.in}, @file{Makefile.am},
-@file{acconfig.h}, and possibly @file{acinclude.m4}, you must use
-autoconf and automake programs to produce the first versions of the
-generated files.  This is done by executing the following sequence of
-commands.
-
-@smallexample
-aclocal
-autoconf
-autoheader
-automake
-@end smallexample
-
-The @samp{aclocal} and @samp{automake} commands are part of the automake
-package, and the @samp{autoconf} and @samp{autoheader} commands are part
-of the autoconf package.
-
-If you are using a @file{m4} subdirectory for your macros, you will need
-to use the @samp{-I m4} option when you run @samp{aclocal}.
-
-If you are not using the Cygnus tree, use the @samp{-a} option when
-running @samp{automake} command in order to copy the required support
-files into your source directory.
-
-If you are using libtool, you must build and install the libtool package
-with the same @samp{--prefix} and @samp{--exec-prefix} options as you
-used with the autoconf and automake packages.  You must do this before
-running any of the above commands.  If you are not using the Cygnus
-tree, you will need to run the @samp{libtoolize} program to copy the
-libtool support files into your directory.
-
-Once you have managed to run these commands without getting any errors,
-you should create a new empty directory, and run the @samp{configure}
-script which will have been created by @samp{autoconf} with the
-@samp{--enable-maintainer-mode} option.  This will give you a set of
-Makefiles which will include rules to automatically rebuild all the
-generated files.
-
-After doing that, whenever you have changed some of the input files and
-want to regenerated the other files, go to your object directory and run
-@samp{make}.  Doing this is more reliable than trying to rebuild the
-files manually, because there are complex order dependencies and it is
-easy to forget something.
-
-@node Getting Started Example
-@section Example
-
-Let's consider a trivial example.
-
-Suppose we want to write a simple version of @samp{touch}.  Our program,
-which we will call @samp{poke}, will take a single file name argument,
-and use the @samp{utime} system call to set the modification and access
-times of the file to the current time.  We want this program to be
-highly portable.
-
-We'll first see what this looks like without using autoconf and
-automake, and then see what it looks like with them.
-
-@menu
-* Getting Started Example 1::		First Try.
-* Getting Started Example 2::		Second Try.
-* Getting Started Example 3::		Third Try.
-* Generate Files in Example::		Generate Files.
-@end menu
-
-@node Getting Started Example 1
-@subsection First Try
-
-Here is our first try at @samp{poke.c}.  Note that we've written it
-without ANSI/ISO C prototypes, since we want it to be highly portable.
-
-@example
-#include <stdio.h>
-#include <stdlib.h>
-#include <sys/types.h>
-#include <utime.h>
-
-int
-main (argc, argv)
-     int argc;
-     char **argv;
-@{
-  if (argc != 2)
-    @{
-      fprintf (stderr, "Usage: poke file\n");
-      exit (1);
-    @}
-
-  if (utime (argv[1], NULL) < 0)
-    @{
-      perror ("utime");
-      exit (1);
-    @}
-
-  exit (0);
-@}
-@end example
-
-We also write a simple @file{Makefile}.
-
-@example
-CC = gcc
-CFLAGS = -g -O2
-
-all: poke
-
-poke: poke.o
-	$(CC) -o poke $(CFLAGS) $(LDFLAGS) poke.o
-@end example
-
-So far, so good.
-
-Unfortunately, there are a few problems.
-
-On older Unix systems derived from BSD 4.3, the @samp{utime} system call
-does not accept a second argument of @samp{NULL}.  On those systems, we
-need to pass a pointer to @samp{struct utimbuf} structure.
-Unfortunately, even older systems don't define that structure; on those
-systems, we need to pass an array of two @samp{long} values.
-
-The header file @file{stdlib.h} was invented by ANSI C, and older
-systems don't have a copy.  We included it above to get a declaration of
-@samp{exit}.
-
-We can find some of these portability problems by running
-@samp{autoscan}, which will create a @file{configure.scan} file which we
-can use as a prototype for our @file{configure.in} file.  I won't show
-the output, but it will notice the potential problems with @samp{utime}
-and @file{stdlib.h}.
-
-In our @file{Makefile}, we don't provide any way to install the program.
-This doesn't matter much for such a simple example, but a real program
-will need an @samp{install} target.  For that matter, we will also want
-a @samp{clean} target.
-
-@node Getting Started Example 2
-@subsection Second Try
-
-Here is our second try at this program.
-
-We modify @file{poke.c} to use preprocessor macros to control what
-features are available.  (I've cheated a bit by using the same macro
-names which autoconf will use).
-
-@example
-#include <stdio.h>
-
-#ifdef STDC_HEADERS
-#include <stdlib.h>
-#endif
-
-#include <sys/types.h>
-
-#ifdef HAVE_UTIME_H
-#include <utime.h>
-#endif
-
-#ifndef HAVE_UTIME_NULL
-
-#include <time.h>
-
-#ifndef HAVE_STRUCT_UTIMBUF
-
-struct utimbuf
-@{
-  long actime;
-  long modtime;
-@};
-
-#endif
-
-static int
-utime_now (file)
-     char *file;
-@{
-  struct utimbuf now;
-
-  now.actime = now.modtime = time (NULL);
-  return utime (file, &now);
-@}
-
-#define utime(f, p) utime_now (f)
-
-#endif /* HAVE_UTIME_NULL  */
-
-int
-main (argc, argv)
-     int argc;
-     char **argv;
-@{
-  if (argc != 2)
-    @{
-      fprintf (stderr, "Usage: poke file\n");
-      exit (1);
-    @}
-
-  if (utime (argv[1], NULL) < 0)
-    @{
-      perror ("utime");
-      exit (1);
-    @}
-
-  exit (0);
-@}
-@end example
-
-Here is the associated @file{Makefile}.  We've added support for the
-preprocessor flags we use.  We've also added @samp{install} and
-@samp{clean} targets.
-
-@example
-# Set this to your installation directory.
-bindir = /usr/local/bin
-
-# Uncomment this if you have the standard ANSI/ISO C header files.
-# STDC_HDRS = -DSTDC_HEADERS
-
-# Uncomment this if you have utime.h.
-# UTIME_H = -DHAVE_UTIME_H
-
-# Uncomment this if utime (FILE, NULL) works on your system.
-# UTIME_NULL = -DHAVE_UTIME_NULL
-
-# Uncomment this if struct utimbuf is defined in utime.h.
-# UTIMBUF = -DHAVE_STRUCT_UTIMBUF
-
-CC = gcc
-CFLAGS = -g -O2
-
-ALL_CFLAGS = $(STDC_HDRS) $(UTIME_H) $(UTIME_NULL) $(UTIMBUF) $(CFLAGS)
-
-all: poke
-
-poke: poke.o
-	$(CC) -o poke $(ALL_CFLAGS) $(LDFLAGS) poke.o
-
-.c.o:
-	$(CC) -c $(ALL_CFLAGS) poke.c
-
-install: poke
-	cp poke $(bindir)/poke
-
-clean:
-	rm poke poke.o
-@end example
-
-Some problems with this approach should be clear.
-
-Users who want to compile poke will have to know how @samp{utime} works
-on their systems, so that they can uncomment the @file{Makefile}
-correctly.
-
-The installation is done using @samp{cp}, but many systems have an
-@samp{install} program which may be used, and which supports optional
-features such as stripping debugging information out of the installed
-binary.
-
-The use of @file{Makefile} variables like @samp{CC}, @samp{CFLAGS} and
-@samp{LDFLAGS} follows the requirements of the GNU standards.  This is
-convenient for all packages, since it reduces surprises for users.
-However, it is easy to get the details wrong, and wind up with a
-slightly nonstandard distribution.
-
-@node Getting Started Example 3
-@subsection Third Try
-
-For our third try at this program, we will write a @file{configure.in}
-script to discover the configuration features on the host system, rather
-than requiring the user to edit the @file{Makefile}.  We will also write
-a @file{Makefile.am} rather than a @file{Makefile}.
-
-The only change to @file{poke.c} is to add a line at the start of the
-file:
-@smallexample
-#include "config.h"
-@end smallexample
-
-The new @file{configure.in} file is as follows.
-
-@example
-AC_INIT(poke.c)
-AM_INIT_AUTOMAKE(poke, 1.0)
-AM_CONFIG_HEADER(config.h:config.in)
-AC_PROG_CC
-AC_HEADER_STDC
-AC_CHECK_HEADERS(utime.h)
-AC_EGREP_HEADER(utimbuf, utime.h, AC_DEFINE(HAVE_STRUCT_UTIMBUF))
-AC_FUNC_UTIME_NULL
-AC_OUTPUT(Makefile)
-@end example
-
-The first four macros in this file, and the last one, were described
-above; see @ref{Write configure.in}.  If we omit these macros, then when
-we run @samp{automake} we will get a reminder that we need them.
-
-The other macros are standard autoconf macros.
-
-@table @samp
-@item AC_HEADER_STDC
-Check for standard C headers.
-@item AC_CHECK_HEADERS
-Check whether a particular header file exists.
-@item AC_EGREP_HEADER
-Check for a particular string in a particular header file, in this case
-checking for @samp{utimbuf} in @file{utime.h}.
-@item AC_FUNC_UTIME_NULL
-Check whether @samp{utime} accepts a NULL second argument to set the
-file change time to the current time.
-@end table
-
-See the autoconf manual for a more complete description.
-
-The new @file{Makefile.am} file is as follows.  Note how simple this is
-compared to our earlier @file{Makefile}.
-
-@example
-bin_PROGRAMS = poke
-
-poke_SOURCES = poke.c
-@end example
-
-This means that we should build a single program name @samp{poke}.  It
-should be installed in the binary directory, which we called
-@samp{bindir} earlier.  The program @samp{poke} is built from the source
-file @file{poke.c}.
-
-We must also write a @file{acconfig.h} file.  Besides @samp{PACKAGE} and
-@samp{VERSION}, which must be mentioned for all packages which use
-automake, we must include @samp{HAVE_STRUCT_UTIMBUF}, since we mentioned
-it in an @samp{AC_DEFINE}.
-
-@example
-/* Name of package.  */
-#undef PACKAGE
-
-/* Version of package.  */
-#undef VERSION
-
-/* Whether utime.h defines struct utimbuf.  */
-#undef HAVE_STRUCT_UTIMBUF
-@end example
-
-@node Generate Files in Example
-@subsection Generate Files
-
-We must now generate the other files, using the following commands.
-
-@smallexample
-aclocal
-autoconf
-autoheader
-automake
-@end smallexample
-
-When we run @samp{autoheader}, it will remind us of any macros we forgot
-to add to @file{acconfig.h}.
-
-When we run @samp{automake}, it will want to add some files to our
-distribution.  It will add them automatically if we use the
-@samp{--add-missing} option.
-
-By default, @samp{automake} will run in GNU mode, which means that it
-will want us to create certain additional files; as of this writing, it
-will want @file{NEWS}, @file{README}, @file{AUTHORS}, and
-@file{ChangeLog}, all of which are files which should appear in a
-standard GNU distribution.  We can either add those files, or run
-@samp{automake} with the @samp{--foreign} option.
-
-Running these tools will generate the following files, all of which are
-described in the next chapter.
-
-@itemize @bullet
-@item
-@file{aclocal.m4}
-@item
-@file{configure}
-@item
-@file{config.in}
-@item
-@file{Makefile.in}
-@item
-@file{stamp-h.in}
-@end itemize
-
-@node Files
-@chapter Files
-
-As was seen in the previous chapter, the GNU configure and build system
-uses a number of different files.  The developer must write a few files.
-The others are generated by various tools.
-
-The system is rather flexible, and can be used in many different ways.
-In describing the files that it uses, I will describe the common case,
-and mention some other cases that may arise.
-
-@menu
-* Developer Files::		Developer Files.
-* Build Files::			Build Files.
-* Support Files::		Support Files.
-@end menu
-
-@node Developer Files
-@section Developer Files
-
-This section describes the files written or generated by the developer
-of a package.
-
-@menu
-* Developer Files Picture::	Developer Files Picture.
-* Written Developer Files::	Written Developer Files.
-* Generated Developer Files::	Generated Developer Files.
-@end menu
-
-@node Developer Files Picture
-@subsection Developer Files Picture
-
-Here is a picture of the files which are written by the developer, the
-generated files which would be included with a complete source
-distribution, and the tools which create those files.
-@ifinfo
-The file names are plain text and the tool names are enclosed by
-@samp{*} characters
-@end ifinfo
-@ifnotinfo
-The file names are in rectangles with square corners and the tool names
-are in rectangles with rounded corners
-@end ifnotinfo
-(e.g., @samp{autoheader} is the name of a tool, not the name of a file).
-
-@image{configdev,,,,jpg}
-
-@node Written Developer Files
-@subsection Written Developer Files
-
-The following files would be written by the developer.
-
-@table @file
-@item configure.in
-@cindex @file{configure.in}
-This is the configuration script.  This script contains invocations of
-autoconf macros.  It may also contain ordinary shell script code.  This
-file will contain feature tests for portability issues.  The last thing
-in the file will normally be an @samp{AC_OUTPUT} macro listing which
-files to create when the builder runs the configure script.  This file
-is always required when using the GNU configure system.  @xref{Write
-configure.in}.
-
-@item Makefile.am
-@cindex @file{Makefile.am}
-This is the automake input file.  It describes how the code should be
-built.  It consists of definitions of automake variables.  It may also
-contain ordinary Makefile targets.  This file is only needed when using
-automake (newer tools normally use automake, but there are still older
-tools which have not been converted, in which the developer writes
-@file{Makefile.in} directly).  @xref{Write Makefile.am}.
-
-@item acconfig.h
-@cindex @file{acconfig.h}
-When the configure script creates a portability header file, by using
-@samp{AM_CONFIG_HEADER} (or, if not using automake,
-@samp{AC_CONFIG_HEADER}), this file is used to describe macros which are
-not recognized by the @samp{autoheader} command.  This is normally a
-fairly uninteresting file, consisting of a collection of @samp{#undef}
-lines with comments.  Normally any call to @samp{AC_DEFINE} in
-@file{configure.in} will require a line in this file. @xref{Write
-acconfig.h}.
-
-@item acinclude.m4
-@cindex @file{acinclude.m4}
-This file is not always required.  It defines local autoconf macros.
-These macros may then be used in @file{configure.in}.  If you don't need
-any local autoconf macros, then you don't need this file at all.  In
-fact, in general, you never need local autoconf macros, since you can
-put everything in @file{configure.in}, but sometimes a local macro is
-convenient.
-
-Newer tools may omit @file{acinclude.m4}, and instead use a
-subdirectory, typically named @file{m4}, and define
-@samp{ACLOCAL_AMFLAGS = -I m4} in @file{Makefile.am} to force
-@samp{aclocal} to look there for macro definitions.  The macro
-definitions are then placed in separate files in that directory.
-
-The @file{acinclude.m4} file is only used when using automake; in older
-tools, the developer writes @file{aclocal.m4} directly, if it is needed.
-@end table
-
-@node Generated Developer Files
-@subsection Generated Developer Files
-
-The following files would be generated by the developer.
-
-When using automake, these files are normally not generated manually
-after the first time.  Instead, the generated @file{Makefile} contains
-rules to automatically rebuild the files as required.  When
-@samp{AM_MAINTAINER_MODE} is used in @file{configure.in} (the normal
-case in Cygnus code), the automatic rebuilding rules will only be
-defined if you configure using the @samp{--enable-maintainer-mode}
-option.
-
-When using automatic rebuilding, it is important to ensure that all the
-various tools have been built and installed on your @samp{PATH}.  Using
-automatic rebuilding is highly recommended, so much so that I'm not
-going to explain what you have to do if you don't use it.
-
-@table @file
-@item configure
-@cindex @file{configure}
-This is the configure script which will be run when building the
-package.  This is generated by @samp{autoconf} from @file{configure.in}
-and @file{aclocal.m4}.  This is a shell script.
-
-@item Makefile.in
-@cindex @file{Makefile.in}
-This is the file which the configure script will turn into the
-@file{Makefile} at build time.  This file is generated by
-@samp{automake} from @file{Makefile.am}.  If you aren't using automake,
-you must write this file yourself.  This file is pretty much a normal
-@file{Makefile}, with some configure substitutions for certain
-variables.
-
-@item aclocal.m4
-@cindex @file{aclocal.m4}
-This file is created by the @samp{aclocal} program, based on the
-contents of @file{configure.in} and @file{acinclude.m4} (or, as noted in
-the description of @file{acinclude.m4} above, on the contents of an
-@file{m4} subdirectory).  This file contains definitions of autoconf
-macros which @samp{autoconf} will use when generating the file
-@file{configure}.  These autoconf macros may be defined by you in
-@file{acinclude.m4} or they may be defined by other packages such as
-automake, libtool or gettext.  If you aren't using automake, you will
-normally write this file yourself; in that case, if @file{configure.in}
-uses only standard autoconf macros, this file will not be needed at all.
-
-@item config.in
-@cindex @file{config.in}
-@cindex @file{config.h.in}
-This file is created by @samp{autoheader} based on @file{acconfig.h} and
-@file{configure.in}.  At build time, the configure script will define
-some of the macros in it to create @file{config.h}, which may then be
-included by your program.  This permits your C code to use preprocessor
-conditionals to change its behaviour based on the characteristics of the
-host system.  This file may also be called @file{config.h.in}.
-
-@item stamp.h-in
-@cindex @file{stamp-h.in}
-This rather uninteresting file, which I omitted from the picture, is
-generated by @samp{automake}.  It always contains the string
-@samp{timestamp}.  It is used as a timestamp file indicating whether
-@file{config.in} is up to date.  Using a timestamp file means that
-@file{config.in} can be marked as up to date without actually changing
-its modification time.  This is useful since @file{config.in} depends
-upon @file{configure.in}, but it is easy to change @file{configure.in}
-in a way which does not affect @file{config.in}.
-@end table
-
-@node Build Files
-@section Build Files
-
-This section describes the files which are created at configure and
-build time.  These are the files which somebody who builds the package
-will see.
-
-Of course, the developer will also build the package.  The distinction
-between developer files and build files is not that the developer does
-not see the build files, but that somebody who only builds the package
-does not have to worry about the developer files.
-
-@menu
-* Build Files Picture::		Build Files Picture.
-* Build Files Description::	Build Files Description.
-@end menu
-
-@node Build Files Picture
-@subsection Build Files Picture
-
-Here is a picture of the files which will be created at build time.
-@file{config.status} is both a created file and a shell script which is
-run to create other files, and the picture attempts to show that.
-
-@image{configbuild,,,,jpg}
-
-@node Build Files Description
-@subsection Build Files Description
-
-This is a description of the files which are created at build time.
-
-@table @file
-@item config.status
-@cindex @file{config.status}
-The first step in building a package is to run the @file{configure}
-script.  The @file{configure} script will create the file
-@file{config.status}, which is itself a shell script.  When you first
-run @file{configure}, it will automatically run @file{config.status}.
-An @file{Makefile} derived from an automake generated @file{Makefile.in}
-will contain rules to automatically run @file{config.status} again when
-necessary to recreate certain files if their inputs change.
-
-@item Makefile
-@cindex @file{Makefile}
-This is the file which make will read to build the program.  The
-@file{config.status} script will transform @file{Makefile.in} into
-@file{Makefile}.
-
-@item config.h
-@cindex @file{config.h}
-This file defines C preprocessor macros which C code can use to adjust
-its behaviour on different systems.  The @file{config.status} script
-will transform @file{config.in} into @file{config.h}.
-
-@item config.cache
-@cindex @file{config.cache}
-This file did not fit neatly into the picture, and I omitted it.  It is
-used by the @file{configure} script to cache results between runs.  This
-can be an important speedup.  If you modify @file{configure.in} in such
-a way that the results of old tests should change (perhaps you have
-added a new library to @samp{LDFLAGS}), then you will have to remove
-@file{config.cache} to force the tests to be rerun.
-
-The autoconf manual explains how to set up a site specific cache file.
-This can speed up running @file{configure} scripts on your system.
-
-@item stamp.h
-@cindex @file{stamp-h}
-This file, which I omitted from the picture, is similar to
-@file{stamp-h.in}.  It is used as a timestamp file indicating whether
-@file{config.h} is up to date.  This is useful since @file{config.h}
-depends upon @file{config.status}, but it is easy for
-@file{config.status} to change in a way which does not affect
-@file{config.h}.
-@end table
-
-@node Support Files
-@section Support Files
-
-The GNU configure and build system requires several support files to be
-included with your distribution.  You do not normally need to concern
-yourself with these.  If you are using the Cygnus tree, most are already
-present.  Otherwise, they will be installed with your source by
-@samp{automake} (with the @samp{--add-missing} option) and
-@samp{libtoolize}.
-
-You don't have to put the support files in the top level directory.  You
-can put them in a subdirectory, and use the @samp{AC_CONFIG_AUX_DIR}
-macro in @file{configure.in} to tell @samp{automake} and the
-@file{configure} script where they are.
-
-In this section, I describe the support files, so that you can know what
-they are and why they are there.
-
-@table @file
-@item ABOUT-NLS
-Added by automake if you are using gettext.  This is a documentation
-file about the gettext project.
-@item ansi2knr.c
-Used by an automake generated @file{Makefile} if you put @samp{ansi2knr}
-in @samp{AUTOMAKE_OPTIONS} in @file{Makefile.am}.  This permits
-compiling ANSI C code with a K&R C compiler.
-@item ansi2knr.1
-The man page which goes with @file{ansi2knr.c}.
-@item config.guess
-A shell script which determines the configuration name for the system on
-which it is run.
-@item config.sub
-A shell script which canonicalizes a configuration name entered by a
-user.
-@item elisp-comp
-Used to compile Emacs LISP files.
-@item install-sh
-A shell script which installs a program.  This is used if the configure
-script can not find an install binary.
-@item ltconfig
-Used by libtool.  This is a shell script which configures libtool for
-the particular system on which it is used.
-@item ltmain.sh
-Used by libtool.  This is the actual libtool script which is used, after
-it is configured by @file{ltconfig} to build a library.
-@item mdate-sh
-A shell script used by an automake generated @file{Makefile} to pretty
-print the modification time of a file.  This is used to maintain version
-numbers for texinfo files.
-@item missing
-A shell script used if some tool is missing entirely.  This is used by
-an automake generated @file{Makefile} to avoid certain sorts of
-timestamp problems.
-@item mkinstalldirs
-A shell script which creates a directory, including all parent
-directories.  This is used by an automake generated @file{Makefile}
-during installation.
-@item texinfo.tex
-Required if you have any texinfo files.  This is used when converting
-Texinfo files into DVI using @samp{texi2dvi} and @TeX{}.
-@item ylwrap
-A shell script used by an automake generated @file{Makefile} to run
-programs like @samp{bison}, @samp{yacc}, @samp{flex}, and @samp{lex}.
-These programs default to producing output files with a fixed name, and
-the @file{ylwrap} script runs them in a subdirectory to avoid file name
-conflicts when using a parallel make program.
-@end table
-
-@node Configuration Names
-@chapter Configuration Names
-@cindex configuration names
-@cindex configuration triplets
-@cindex triplets
-@cindex host names
-@cindex host triplets
-@cindex canonical system names
-@cindex system names
-@cindex system types
-
-The GNU configure system names all systems using a @dfn{configuration
-name}.  All such names used to be triplets (they may now contain four
-parts in certain cases), and the term @dfn{configuration triplet} is
-still seen.
-
-@menu
-* Configuration Name Definition::	Configuration Name Definition.
-* Using Configuration Names::		Using Configuration Names.
-@end menu
-
-@node Configuration Name Definition
-@section Configuration Name Definition
-
-This is a string of the form
-@var{cpu}-@var{manufacturer}-@var{operating_system}.  In some cases,
-this is extended to a four part form:
-@var{cpu}-@var{manufacturer}-@var{kernel}-@var{operating_system}.
-
-When using a configuration name in a configure option, it is normally
-not necessary to specify an entire name.  In particular, the
-@var{manufacturer} field is often omitted, leading to strings such as
-@samp{i386-linux} or @samp{sparc-sunos}.  The shell script
-@file{config.sub} will translate these shortened strings into the
-canonical form.  autoconf will arrange for @file{config.sub} to be run
-automatically when it is needed.
-
-The fields of a configuration name are as follows:
-
-@table @var
-@item cpu
-The type of processor.  This is typically something like @samp{i386} or
-@samp{sparc}.  More specific variants are used as well, such as
-@samp{mipsel} to indicate a little endian MIPS processor.
-@item manufacturer
-A somewhat freeform field which indicates the manufacturer of the
-system.  This is often simply @samp{unknown}.  Other common strings are
-@samp{pc} for an IBM PC compatible system, or the name of a workstation
-vendor, such as @samp{sun}.
-@item operating_system
-The name of the operating system which is run on the system.  This will
-be something like @samp{solaris2.5} or @samp{irix6.3}.  There is no
-particular restriction on the version number, and strings like
-@samp{aix4.1.4.0} are seen.  For an embedded system, which has no
-operating system, this field normally indicates the type of object file
-format, such as @samp{elf} or @samp{coff}.
-@item kernel
-This is used mainly for GNU/Linux.  A typical GNU/Linux configuration
-name is @samp{i586-pc-linux-gnulibc1}.  In this case the kernel,
-@samp{linux}, is separated from the operating system, @samp{gnulibc1}.
-@end table
-
-The shell script @file{config.guess} will normally print the correct
-configuration name for the system on which it is run.  It does by
-running @samp{uname} and by examining other characteristics of the
-system.
-
-Because @file{config.guess} can normally determine the configuration
-name for a machine, it is normally only necessary to specify a
-configuration name when building a cross-compiler or when building using
-a cross-compiler.
-
-@node Using Configuration Names
-@section Using Configuration Names
-
-A configure script will sometimes have to make a decision based on a
-configuration name.  You will need to do this if you have to compile
-code differently based on something which can not be tested using a
-standard autoconf feature test.
-
-It is normally better to test for particular features, rather than to
-test for a particular system.  This is because as Unix evolves,
-different systems copy features from one another.  Even if you need to
-determine whether the feature is supported based on a configuration
-name, you should define a macro which describes the feature, rather than
-defining a macro which describes the particular system you are on.
-
-Testing for a particular system is normally done using a case statement
-in @file{configure.in}.  The case statement might look something like
-the following, assuming that @samp{host} is a shell variable holding a
-canonical configuration name (which will be the case if
-@file{configure.in} uses the @samp{AC_CANONICAL_HOST} or
-@samp{AC_CANONICAL_SYSTEM} macro).
-
-@smallexample
-case "$@{host@}" in
-i[3-7]86-*-linux-gnu*) do something ;;
-sparc*-sun-solaris2.[56789]*) do something ;;
-sparc*-sun-solaris*) do something ;;
-mips*-*-elf*) do something ;;
-esac
-@end smallexample
-
-It is particularly important to use @samp{*} after the operating system
-field, in order to match the version number which will be generated by
-@file{config.guess}.
-
-In most cases you must be careful to match a range of processor types.
-For most processor families, a trailing @samp{*} suffices, as in
-@samp{mips*} above.  For the i386 family, something along the lines of
-@samp{i[3-7]86} suffices at present.  For the m68k family, you will
-need something like @samp{m68*}.  Of course, if you do not need to match
-on the processor, it is simpler to just replace the entire field by a
-@samp{*}, as in @samp{*-*-irix*}.
-
-@node Cross Compilation Tools
-@chapter Cross Compilation Tools
-@cindex cross tools
-
-The GNU configure and build system can be used to build @dfn{cross
-compilation} tools.  A cross compilation tool is a tool which runs on
-one system and produces code which runs on another system.
-
-@menu
-* Cross Compilation Concepts::		Cross Compilation Concepts.
-* Host and Target::			Host and Target.
-* Using the Host Type::			Using the Host Type.
-* Specifying the Target::       	Specifying the Target.
-* Using the Target Type::		Using the Target Type.
-* Cross Tools in the Cygnus Tree::	Cross Tools in the Cygnus Tree
-@end menu
-
-@node Cross Compilation Concepts
-@section Cross Compilation Concepts
-
-@cindex cross compiler
-A compiler which produces programs which run on a different system is a
-cross compilation compiler, or simply a @dfn{cross compiler}.
-Similarly, we speak of cross assemblers, cross linkers, etc.
-
-In the normal case, a compiler produces code which runs on the same
-system as the one on which the compiler runs.  When it is necessary to
-distinguish this case from the cross compilation case, such a compiler
-is called a @dfn{native compiler}.  Similarly, we speak of native
-assemblers, etc.
-
-Although the debugger is not strictly speaking a compilation tool, it is
-nevertheless meaningful to speak of a cross debugger: a debugger which
-is used to debug code which runs on another system.  Everything that is
-said below about configuring cross compilation tools applies to the
-debugger as well.
-
-@node Host and Target
-@section Host and Target
-@cindex host system
-@cindex target system
-
-When building cross compilation tools, there are two different systems
-involved: the system on which the tools will run, and the system for
-which the tools generate code.
-
-The system on which the tools will run is called the @dfn{host} system.
-
-The system for which the tools generate code is called the @dfn{target}
-system.
-
-For example, suppose you have a compiler which runs on a GNU/Linux
-system and generates ELF programs for a MIPS embedded system.  In this
-case the GNU/Linux system is the host, and the MIPS ELF system is the
-target.  Such a compiler could be called a GNU/Linux cross MIPS ELF
-compiler, or, equivalently, a @samp{i386-linux-gnu} cross
-@samp{mips-elf} compiler.
-
-Naturally, most programs are not cross compilation tools.  For those
-programs, it does not make sense to speak of a target.  It only makes
-sense to speak of a target for tools like @samp{gcc} or the
-@samp{binutils} which actually produce running code.  For example, it
-does not make sense to speak of the target of a tool like @samp{bison}
-or @samp{make}.
-
-Most cross compilation tools can also serve as native tools.  For a
-native compilation tool, it is still meaningful to speak of a target.
-For a native tool, the target is the same as the host.  For example, for
-a GNU/Linux native compiler, the host is GNU/Linux, and the target is
-also GNU/Linux.
-
-@node Using the Host Type
-@section Using the Host Type
-
-In almost all cases the host system is the system on which you run the
-@samp{configure} script, and on which you build the tools (for the case
-when they differ, @pxref{Canadian Cross}).
-
-@cindex @samp{AC_CANONICAL_HOST}
-If your configure script needs to know the configuration name of the
-host system, and the package is not a cross compilation tool and
-therefore does not have a target, put @samp{AC_CANONICAL_HOST} in
-@file{configure.in}.  This macro will arrange to define a few shell
-variables when the @samp{configure} script is run.
-
-@table @samp
-@item host
-The canonical configuration name of the host.  This will normally be
-determined by running the @file{config.guess} shell script, although the
-user is permitted to override this by using an explicit @samp{--host}
-option.
-@item host_alias
-In the unusual case that the user used an explicit @samp{--host} option,
-this will be the argument to @samp{--host}.  In the normal case, this
-will be the same as the @samp{host} variable.
-@item host_cpu
-@itemx host_vendor
-@itemx host_os
-The first three parts of the canonical configuration name.
-@end table
-
-The shell variables may be used by putting shell code in
-@file{configure.in}.  For an example, see @ref{Using Configuration
-Names}.
-
-@node Specifying the Target
-@section Specifying the Target
-
-By default, the @samp{configure} script will assume that the target is
-the same as the host.  This is the more common case; for example, it
-leads to a native compiler rather than a cross compiler.
-
-@cindex @samp{--target} option
-@cindex target option
-@cindex configure target
-If you want to build a cross compilation tool, you must specify the
-target explicitly by using the @samp{--target} option when you run
-@samp{configure}.  The argument to @samp{--target} is the configuration
-name of the system for which you wish to generate code.
-@xref{Configuration Names}.
-
-For example, to build tools which generate code for a MIPS ELF embedded
-system, you would use @samp{--target mips-elf}.
-
-@node Using the Target Type
-@section Using the Target Type
-
-@cindex @samp{AC_CANONICAL_SYSTEM}
-When writing @file{configure.in} for a cross compilation tool, you will
-need to use information about the target.  To do this, put
-@samp{AC_CANONICAL_SYSTEM} in @file{configure.in}.
-
-@samp{AC_CANONICAL_SYSTEM} will look for a @samp{--target} option and
-canonicalize it using the @file{config.sub} shell script.  It will also
-run @samp{AC_CANONICAL_HOST} (@pxref{Using the Host Type}).
-
-The target type will be recorded in the following shell variables.  Note
-that the host versions of these variables will also be defined by
-@samp{AC_CANONICAL_HOST}.
-
-@table @samp
-@item target
-The canonical configuration name of the target.
-@item target_alias
-The argument to the @samp{--target} option.  If the user did not specify
-a @samp{--target} option, this will be the same as @samp{host_alias}.
-@item target_cpu
-@itemx target_vendor
-@itemx target_os
-The first three parts of the canonical target configuration name.
-@end table
-
-Note that if @samp{host} and @samp{target} are the same string, you can
-assume a native configuration.  If they are different, you can assume a
-cross configuration.
-
-It is arguably possible for @samp{host} and @samp{target} to represent
-the same system, but for the strings to not be identical.  For example,
-if @samp{config.guess} returns @samp{sparc-sun-sunos4.1.4}, and somebody
-configures with @samp{--target sparc-sun-sunos4.1}, then the slight
-differences between the two versions of SunOS may be unimportant for
-your tool.  However, in the general case it can be quite difficult to
-determine whether the differences between two configuration names are
-significant or not.  Therefore, by convention, if the user specifies a
-@samp{--target} option without specifying a @samp{--host} option, it is
-assumed that the user wants to configure a cross compilation tool.
-
-The variables @samp{target} and @samp{target_alias} should be handled
-differently.
-
-In general, whenever the user may actually see a string,
-@samp{target_alias} should be used.  This includes anything which may
-appear in the file system, such as a directory name or part of a tool
-name.  It also includes any tool output, unless it is clearly labelled
-as the canonical target configuration name.  This permits the user to
-use the @samp{--target} option to specify how the tool will appear to
-the outside world.
-
-On the other hand, when checking for characteristics of the target
-system, @samp{target} should be used.  This is because a wide variety of
-@samp{--target} options may map into the same canonical configuration
-name.  You should not attempt to duplicate the canonicalization done by
-@samp{config.sub} in your own code.
-
-By convention, cross tools are installed with a prefix of the argument
-used with the @samp{--target} option, also known as @samp{target_alias}
-(@pxref{Using the Target Type}).  If the user does not use the
-@samp{--target} option, and thus is building a native tool, no prefix is
-used.
-
-For example, if gcc is configured with @samp{--target mips-elf}, then
-the installed binary will be named @samp{mips-elf-gcc}.  If gcc is
-configured without a @samp{--target} option, then the installed binary
-will be named @samp{gcc}.
-
-The autoconf macro @samp{AC_ARG_PROGRAM} will handle this for you.  If
-you are using automake, no more need be done; the programs will
-automatically be installed with the correct prefixes.  Otherwise, see
-the autoconf documentation for @samp{AC_ARG_PROGRAM}.
-
-@node Cross Tools in the Cygnus Tree
-@section Cross Tools in the Cygnus Tree
-
-The Cygnus tree is used for various packages including gdb, the GNU
-binutils, and egcs.  It is also, of course, used for Cygnus releases.
-
-In the Cygnus tree, the top level @file{configure} script uses the old
-Cygnus configure system, not autoconf.  The top level @file{Makefile.in}
-is written to build packages based on what is in the source tree, and
-supports building a large number of tools in a single
-@samp{configure}/@samp{make} step.
-
-The Cygnus tree may be configured with a @samp{--target} option.  The
-@samp{--target} option applies recursively to every subdirectory, and
-permits building an entire set of cross tools at once.
-
-@menu
-* Host and Target Libraries::		Host and Target Libraries.
-* Target Library Configure Scripts::	Target Library Configure Scripts.
-* Make Targets in Cygnus Tree::         Make Targets in Cygnus Tree.
-* Target libiberty::			Target libiberty
-@end menu
-
-@node Host and Target Libraries
-@subsection Host and Target Libraries
-
-The Cygnus tree distinguishes host libraries from target libraries.
-
-Host libraries are built with the compiler used to build the programs
-which run on the host, which is called the host compiler.  This includes
-libraries such as @samp{bfd} and @samp{tcl}.  These libraries are built
-with the host compiler, and are linked into programs like the binutils
-or gcc which run on the host.
-
-Target libraries are built with the target compiler.  If gcc is present
-in the source tree, then the target compiler is the gcc that is built
-using the host compiler.  Target libraries are libraries such as
-@samp{newlib} and @samp{libstdc++}.  These libraries are not linked into
-the host programs, but are instead made available for use with programs
-built with the target compiler.
-
-For the rest of this section, assume that gcc is present in the source
-tree, so that it will be used to build the target libraries.
-
-There is a complication here.  The configure process needs to know which
-compiler you are going to use to build a tool; otherwise, the feature
-tests will not work correctly.  The Cygnus tree handles this by not
-configuring the target libraries until the target compiler is built.  In
-order to permit everything to build using a single
-@samp{configure}/@samp{make}, the configuration of the target libraries
-is actually triggered during the make step.
-
-When the target libraries are configured, the @samp{--target} option is
-not used.  Instead, the @samp{--host} option is used with the argument
-of the @samp{--target} option for the overall configuration.  If no
-@samp{--target} option was used for the overall configuration, the
-@samp{--host} option will be passed with the output of the
-@file{config.guess} shell script.  Any @samp{--build} option is passed
-down unchanged.
-
-This translation of configuration options is done because since the
-target libraries are compiled with the target compiler, they are being
-built in order to run on the target of the overall configuration.  By
-the definition of host, this means that their host system is the same as
-the target system of the overall configuration.
-
-The same process is used for both a native configuration and a cross
-configuration.  Even when using a native configuration, the target
-libraries will be configured and built using the newly built compiler.
-This is particularly important for the C++ libraries, since there is no
-reason to assume that the C++ compiler used to build the host tools (if
-there even is one) uses the same ABI as the g++ compiler which will be
-used to build the target libraries.
-
-There is one difference between a native configuration and a cross
-configuration.  In a native configuration, the target libraries are
-normally configured and built as siblings of the host tools.  In a cross
-configuration, the target libraries are normally built in a subdirectory
-whose name is the argument to @samp{--target}.  This is mainly for
-historical reasons.
-
-To summarize, running @samp{configure} in the Cygnus tree configures all
-the host libraries and tools, but does not configure any of the target
-libraries.  Running @samp{make} then does the following steps:
-
-@itemize @bullet
-@item
-Build the host libraries.
-@item
-Build the host programs, including gcc.  Note that we call gcc both a
-host program (since it runs on the host) and a target compiler (since it
-generates code for the target).
-@item
-Using the newly built target compiler, configure the target libraries.
-@item
-Build the target libraries.
-@end itemize
-
-The steps need not be done in precisely this order, since they are
-actually controlled by @file{Makefile} targets.
-
-@node Target Library Configure Scripts
-@subsection Target Library Configure Scripts
-
-There are a few things you must know in order to write a configure
-script for a target library.  This is just a quick sketch, and beginners
-shouldn't worry if they don't follow everything here.
-
-The target libraries are configured and built using a newly built target
-compiler.  There may not be any startup files or libraries for this
-target compiler.  In fact, those files will probably be built as part of
-some target library, which naturally means that they will not exist when
-your target library is configured.
-
-This means that the configure script for a target library may not use
-any test which requires doing a link.  This unfortunately includes many
-useful autoconf macros, such as @samp{AC_CHECK_FUNCS}.  autoconf macros
-which do a compile but not a link, such as @samp{AC_CHECK_HEADERS}, may
-be used.
-
-This is a severe restriction, but normally not a fatal one, as target
-libraries can often assume the presence of other target libraries, and
-thus know which functions will be available.
-
-As of this writing, the autoconf macro @samp{AC_PROG_CC} does a link to
-make sure that the compiler works.  This may fail in a target library,
-so target libraries must use a different set of macros to locate the
-compiler.  See the @file{configure.in} file in a directory like
-@file{libiberty} or @file{libgloss} for an example.
-
-As noted in the previous section, target libraries are sometimes built
-in directories which are siblings to the host tools, and are sometimes
-built in a subdirectory.  The @samp{--with-target-subdir} configure
-option will be passed when the library is configured.  Its value will be
-an empty string if the target library is a sibling.  Its value will be
-the name of the subdirectory if the target library is in a subdirectory.
-
-If the overall build is not a native build (i.e., the overall configure
-used the @samp{--target} option), then the library will be configured
-with the @samp{--with-cross-host} option.  The value of this option will
-be the host system of the overall build.  Recall that the host system of
-the library will be the target of the overall build.  If the overall
-build is a native build, the @samp{--with-cross-host} option will not be
-used.
-
-A library which can be built both standalone and as a target library may
-want to install itself into different directories depending upon the
-case.  When built standalone, or when built native, the library should
-be installed in @samp{$(libdir)}.  When built as a target library which
-is not native, the library should be installed in @samp{$(tooldir)/lib}.
-The @samp{--with-cross-host} option may be used to distinguish these
-cases.
-
-This same test of @samp{--with-cross-host} may be used to see whether it
-is OK to use link tests in the configure script.  If the
-@samp{--with-cross-host} option is not used, then the library is being
-built either standalone or native, and a link should work.
-
-@node Make Targets in Cygnus Tree
-@subsection Make Targets in Cygnus Tree
-
-The top level @file{Makefile} in the Cygnus tree defines targets for
-every known subdirectory.
-
-For every subdirectory @var{dir} which holds a host library or program,
-the @file{Makefile} target @samp{all-@var{dir}} will build that library
-or program.
-
-There are dependencies among host tools.  For example, building gcc
-requires first building gas, because the gcc build process invokes the
-target assembler.  These dependencies are reflected in the top level
-@file{Makefile}.
-
-For every subdirectory @var{dir} which holds a target library, the
-@file{Makefile} target @samp{configure-target-@var{dir}} will configure
-that library.  The @file{Makefile} target @samp{all-target-@var{dir}}
-will build that library.
-
-Every @samp{configure-target-@var{dir}} target depends upon
-@samp{all-gcc}, since gcc, the target compiler, is required to configure
-the tool.  Every @samp{all-target-@var{dir}} target depends upon the
-corresponding @samp{configure-target-@var{dir}} target.
-
-There are several other targets which may be of interest for each
-directory: @samp{install-@var{dir}}, @samp{clean-@var{dir}}, and
-@samp{check-@var{dir}}.  There are also corresponding @samp{target}
-versions of these for the target libraries , such as
-@samp{install-target-@var{dir}}.
-
-@node Target libiberty
-@subsection Target libiberty
-
-The @file{libiberty} subdirectory is currently a special case, in that
-it is the only directory which is built both using the host compiler and
-using the target compiler.
-
-This is because the files in @file{libiberty} are used when building the
-host tools, and they are also incorporated into the @file{libstdc++}
-target library as support code.
-
-This duality does not pose any particular difficulties.  It means that
-there are targets for both @samp{all-libiberty} and
-@samp{all-target-libiberty}.
-
-In a native configuration, when target libraries are not built in a
-subdirectory, the same objects are normally used as both the host build
-and the target build.  This is normally OK, since libiberty contains
-only C code, and in a native configuration the results of the host
-compiler and the target compiler are normally interoperable.
-
-Irix 6 is again an exception here, since the SGI native compiler
-defaults to using the @samp{O32} ABI, and gcc defaults to using the
-@samp{N32} ABI.  On Irix 6, the target libraries are built in a
-subdirectory even for a native configuration, avoiding this problem.
-
-There are currently no other libraries built for both the host and the
-target, but there is no conceptual problem with adding more.
-
-@node Canadian Cross
-@chapter Canadian Cross
-@cindex canadian cross
-@cindex building with a cross compiler
-@cindex cross compiler, building with
-
-It is possible to use the GNU configure and build system to build a
-program which will run on a system which is different from the system on
-which the tools are built.  In other words, it is possible to build
-programs using a cross compiler.
-
-This is referred to as a @dfn{Canadian Cross}.
-
-@menu
-* Canadian Cross Example::		Canadian Cross Example.
-* Canadian Cross Concepts::		Canadian Cross Concepts.
-* Build Cross Host Tools::		Build Cross Host Tools.
-* Build and Host Options::		Build and Host Options.
-* CCross not in Cygnus Tree::		Canadian Cross not in Cygnus Tree.
-* CCross in Cygnus Tree::		Canadian Cross in Cygnus Tree.
-* Supporting Canadian Cross::		Supporting Canadian Cross.
-@end menu
-
-@node Canadian Cross Example
-@section Canadian Cross Example
-
-Here is an example of a Canadian Cross.
-
-While running on a GNU/Linux, you can build a program which will run on
-a Solaris system.  You would use a GNU/Linux cross Solaris compiler to
-build the program.
-
-Of course, you could not run the resulting program on your GNU/Linux
-system.  You would have to copy it over to a Solaris system before you
-would run it.
-
-Of course, you could also simply build the programs on the Solaris
-system in the first place.  However, perhaps the Solaris system is not
-available for some reason; perhaps you actually don't have one, but you
-want to build the tools for somebody else to use.  Or perhaps your
-GNU/Linux system is much faster than your Solaris system.
-
-A Canadian Cross build is most frequently used when building programs to
-run on a non-Unix system, such as DOS or Windows.  It may be simpler to
-configure and build on a Unix system than to support the configuration
-machinery on a non-Unix system.
-
-@node Canadian Cross Concepts
-@section Canadian Cross Concepts
-
-When building a Canadian Cross, there are at least two different systems
-involved: the system on which the tools are being built, and the system
-on which the tools will run.
-
-The system on which the tools are being built is called the @dfn{build}
-system.
-
-The system on which the tools will run is called the host system.
-
-For example, if you are building a Solaris program on a GNU/Linux
-system, as in the previous section, the build system would be GNU/Linux,
-and the host system would be Solaris.
-
-It is, of course, possible to build a cross compiler using a Canadian
-Cross (i.e., build a cross compiler using a cross compiler).  In this
-case, the system for which the resulting cross compiler generates code
-is called the target system.  (For a more complete discussion of host
-and target systems, @pxref{Host and Target}).
-
-An example of building a cross compiler using a Canadian Cross would be
-building a Windows cross MIPS ELF compiler on a GNU/Linux system.  In
-this case the build system would be GNU/Linux, the host system would be
-Windows, and the target system would be MIPS ELF.
-
-The name Canadian Cross comes from the case when the build, host, and
-target systems are all different.  At the time that these issues were
-all being hashed out, Canada had three national political parties.
-
-@node Build Cross Host Tools
-@section Build Cross Host Tools
-
-In order to configure a program for a Canadian Cross build, you must
-first build and install the set of cross tools you will use to build the
-program.
-
-These tools will be build cross host tools.  That is, they will run on
-the build system, and will produce code that runs on the host system.
-
-It is easy to confuse the meaning of build and host here.  Always
-remember that the build system is where you are doing the build, and the
-host system is where the resulting program will run.  Therefore, you
-need a build cross host compiler.
-
-In general, you must have a complete cross environment in order to do
-the build.  This normally means a cross compiler, cross assembler, and
-so forth, as well as libraries and include files for the host system.
-
-@node Build and Host Options
-@section Build and Host Options
-@cindex configuring a canadian cross
-@cindex canadian cross, configuring
-
-When you run @file{configure}, you must use both the @samp{--build} and
-@samp{--host} options.
-
-@cindex @samp{--build} option
-@cindex build option
-@cindex configure build system
-The @samp{--build} option is used to specify the configuration name of
-the build system.  This can normally be the result of running the
-@file{config.guess} shell script, and it is reasonable to use
-@samp{--build=`config.guess`}.
-
-@cindex @samp{--host} option
-@cindex host option
-@cindex configure host
-The @samp{--host} option is used to specify the configuration name of
-the host system.
-
-As we explained earlier, @file{config.guess} is used to set the default
-value for the @samp{--host} option (@pxref{Using the Host Type}).  We
-can now see that since @file{config.guess} returns the type of system on
-which it is run, it really identifies the build system.  Since the host
-system is normally the same as the build system (i.e., people do not
-normally build using a cross compiler), it is reasonable to use the
-result of @file{config.guess} as the default for the host system when
-the @samp{--host} option is not used.
-
-It might seem that if the @samp{--host} option were used without the
-@samp{--build} option that the configure script could run
-@file{config.guess} to determine the build system, and presume a
-Canadian Cross if the result of @file{config.guess} differed from the
-@samp{--host} option.  However, for historical reasons, some configure
-scripts are routinely run using an explicit @samp{--host} option, rather
-than using the default from @file{config.guess}.  As noted earlier, it
-is difficult or impossible to reliably compare configuration names
-(@pxref{Using the Target Type}).  Therefore, by convention, if the
-@samp{--host} option is used, but the @samp{--build} option is not used,
-then the build system defaults to the host system.
-
-@node CCross not in Cygnus Tree
-@section Canadian Cross not in Cygnus Tree.
-
-If you are not using the Cygnus tree, you must explicitly specify the
-cross tools which you want to use to build the program.  This is done by
-setting environment variables before running the @file{configure}
-script.
-
-You must normally set at least the environment variables @samp{CC},
-@samp{AR}, and @samp{RANLIB} to the cross tools which you want to use to
-build.
-
-For some programs, you must set additional cross tools as well, such as
-@samp{AS}, @samp{LD}, or @samp{NM}.
-
-You would set these environment variables to the build cross tools which
-you are going to use.
-
-For example, if you are building a Solaris program on a GNU/Linux
-system, and your GNU/Linux cross Solaris compiler were named
-@samp{solaris-gcc}, then you would set the environment variable
-@samp{CC} to @samp{solaris-gcc}.
-
-@node CCross in Cygnus Tree
-@section Canadian Cross in Cygnus Tree
-@cindex canadian cross in cygnus tree
-
-This section describes configuring and building a Canadian Cross when
-using the Cygnus tree.
-
-@menu
-* Standard Cygnus CCross::	Building a Normal Program.
-* Cross Cygnus CCross::		Building a Cross Program.
-@end menu
-
-@node Standard Cygnus CCross
-@subsection Building a Normal Program
-
-When configuring a Canadian Cross in the Cygnus tree, all the
-appropriate environment variables are automatically set to
-@samp{@var{host}-@var{tool}}, where @var{host} is the value used for the
-@samp{--host} option, and @var{tool} is the name of the tool (e.g.,
-@samp{gcc}, @samp{as}, etc.).  These tools must be on your @samp{PATH}.
-
-Adding a prefix of @var{host} will give the usual name for the build
-cross host tools.  To see this, consider that when these cross tools
-were built, they were configured to run on the build system and to
-produce code for the host system.  That is, they were configured with a
-@samp{--target} option that is the same as the system which we are now
-calling the host.  Recall that the default name for installed cross
-tools uses the target system as a prefix (@pxref{Using the Target
-Type}).  Since that is the system which we are now calling the host,
-@var{host} is the right prefix to use.
-
-For example, if you configure with @samp{--build=i386-linux-gnu} and
-@samp{--host=solaris}, then the Cygnus tree will automatically default
-to using the compiler @samp{solaris-gcc}.  You must have previously
-built and installed this compiler, probably by doing a build with no
-@samp{--host} option and with a @samp{--target} option of
-@samp{solaris}.
-
-@node Cross Cygnus CCross
-@subsection Building a Cross Program
-
-There are additional considerations if you want to build a cross
-compiler, rather than a native compiler, in the Cygnus tree using a
-Canadian Cross.
-
-When you build a cross compiler using the Cygnus tree, then the target
-libraries will normally be built with the newly built target compiler
-(@pxref{Host and Target Libraries}).  However, this will not work when
-building with a Canadian Cross.  This is because the newly built target
-compiler will be a program which runs on the host system, and therefore
-will not be able to run on the build system.
-
-Therefore, when building a cross compiler with the Cygnus tree, you must
-first install a set of build cross target tools.  These tools will be
-used when building the target libraries.
-
-Note that this is not a requirement of a Canadian Cross in general.  For
-example, it would be possible to build just the host cross target tools
-on the build system, to copy the tools to the host system, and to build
-the target libraries on the host system.  The requirement for build
-cross target tools is imposed by the Cygnus tree, which expects to be
-able to build both host programs and target libraries in a single
-@samp{configure}/@samp{make} step.  Because it builds these in a single
-step, it expects to be able to build the target libraries on the build
-system, which means that it must use a build cross target toolchain.
-
-For example, suppose you want to build a Windows cross MIPS ELF compiler
-on a GNU/Linux system.  You must have previously installed both a
-GNU/Linux cross Windows compiler and a GNU/Linux cross MIPS ELF
-compiler.
-
-In order to build the Windows (configuration name @samp{i386-cygwin32})
-cross MIPS ELF (configure name @samp{mips-elf}) compiler, you might
-execute the following commands (long command lines are broken across
-lines with a trailing backslash as a continuation character).
-
-@example
-mkdir linux-x-cygwin32
-cd linux-x-cygwin32
-@var{srcdir}/configure --target i386-cygwin32 --prefix=@var{installdir} \
-  --exec-prefix=@var{installdir}/H-i386-linux
-make
-make install
-cd ..
-mkdir linux-x-mips-elf
-cd linux-x-mips-elf
-@var{srcdir}/configure --target mips-elf --prefix=@var{installdir} \
-  --exec-prefix=@var{installdir}/H-i386-linux
-make
-make install
-cd ..
-mkdir cygwin32-x-mips-elf
-cd cygwin32-x-mips-elf
-@var{srcdir}/configure --build=i386-linux-gnu --host=i386-cygwin32 \
-  --target=mips-elf --prefix=@var{wininstalldir} \
-  --exec-prefix=@var{wininstalldir}/H-i386-cygwin32
-make
-make install
-@end example
-
-You would then copy the contents of @var{wininstalldir} over to the
-Windows machine, and run the resulting programs.
-
-@node Supporting Canadian Cross
-@section Supporting Canadian Cross
-
-If you want to make it possible to build a program you are developing
-using a Canadian Cross, you must take some care when writing your
-configure and make rules.  Simple cases will normally work correctly.
-However, it is not hard to write configure and make tests which will
-fail in a Canadian Cross.
-
-@menu
-* CCross in Configure::		Supporting Canadian Cross in Configure Scripts.
-* CCross in Make::		Supporting Canadian Cross in Makefiles.
-@end menu
-
-@node CCross in Configure
-@subsection Supporting Canadian Cross in Configure Scripts
-@cindex canadian cross in configure
-
-In a @file{configure.in} file, after calling @samp{AC_PROG_CC}, you can
-find out whether this is a Canadian Cross configure by examining the
-shell variable @samp{cross_compiling}.  In a Canadian Cross, which means
-that the compiler is a cross compiler, @samp{cross_compiling} will be
-@samp{yes}.  In a normal configuration, @samp{cross_compiling} will be
-@samp{no}.
-
-You ordinarily do not need to know the type of the build system in a
-configure script.  However, if you do need that information, you can get
-it by using the macro @samp{AC_CANONICAL_SYSTEM}, the same macro that is
-used to determine the target system.  This macro will set the variables
-@samp{build}, @samp{build_alias}, @samp{build_cpu}, @samp{build_vendor},
-and @samp{build_os}, which correspond to the similar @samp{target} and
-@samp{host} variables, except that they describe the build system.
-
-When writing tests in @file{configure.in}, you must remember that you
-want to test the host environment, not the build environment.
-
-Macros like @samp{AC_CHECK_FUNCS} which use the compiler will test the
-host environment.  That is because the tests will be done by running the
-compiler, which is actually a build cross host compiler.  If the
-compiler can find the function, that means that the function is present
-in the host environment.
-
-Tests like @samp{test -f /dev/ptyp0}, on the other hand, will test the
-build environment.  Remember that the configure script is running on the
-build system, not the host system.  If your configure scripts examines
-files, those files will be on the build system.  Whatever you determine
-based on those files may or may not be the case on the host system.
-
-Most autoconf macros will work correctly for a Canadian Cross.  The main
-exception is @samp{AC_TRY_RUN}.  This macro tries to compile and run a
-test program.  This will fail in a Canadian Cross, because the program
-will be compiled for the host system, which means that it will not run
-on the build system.
-
-The @samp{AC_TRY_RUN} macro provides an optional argument to tell the
-configure script what to do in a Canadian Cross.  If that argument is
-not present, you will get a warning when you run @samp{autoconf}:
-@smallexample
-warning: AC_TRY_RUN called without default to allow cross compiling
-@end smallexample
-@noindent
-This tells you that the resulting @file{configure} script will not work
-with a Canadian Cross.
-
-In some cases while it may better to perform a test at configure time,
-it is also possible to perform the test at run time.  In such a case you
-can use the cross compiling argument to @samp{AC_TRY_RUN} to tell your
-program that the test could not be performed at configure time.
-
-There are a few other autoconf macros which will not work correctly with
-a Canadian Cross: a partial list is @samp{AC_FUNC_GETPGRP},
-@samp{AC_FUNC_SETPGRP}, @samp{AC_FUNC_SETVBUF_REVERSED}, and
-@samp{AC_SYS_RESTARTABLE_SYSCALLS}.  The @samp{AC_CHECK_SIZEOF} macro is
-generally not very useful with a Canadian Cross; it permits an optional
-argument indicating the default size, but there is no way to know what
-the correct default should be.
-
-@node CCross in Make
-@subsection Supporting Canadian Cross in Makefiles.
-@cindex canadian cross in makefile
-
-The main Canadian Cross issue in a @file{Makefile} arises when you want
-to use a subsidiary program to generate code or data which you will then
-include in your real program.
-
-If you compile this subsidiary program using @samp{$(CC)} in the usual
-way, you will not be able to run it.  This is because @samp{$(CC)} will
-build a program for the host system, but the program is being built on
-the build system.
-
-You must instead use a compiler for the build system, rather than the
-host system.  In the Cygnus tree, this make variable
-@samp{$(CC_FOR_BUILD)} will hold a compiler for the build system.
-
-Note that you should not include @file{config.h} in a file you are
-compiling with @samp{$(CC_FOR_BUILD)}.  The @file{configure} script will
-build @file{config.h} with information for the host system.  However,
-you are compiling the file using a compiler for the build system (a
-native compiler).  Subsidiary programs are normally simple filters which
-do no user interaction, and it is normally possible to write them in a
-highly portable fashion so that the absence of @file{config.h} is not
-crucial.
-
-@cindex @samp{HOST_CC}
-The gcc @file{Makefile.in} shows a complex situation in which certain
-files, such as @file{rtl.c}, must be compiled into both subsidiary
-programs run on the build system and into the final program.  This
-approach may be of interest for advanced build system hackers.  Note
-that the build system compiler is rather confusingly called
-@samp{HOST_CC}.
-
-@node Cygnus Configure
-@chapter Cygnus Configure
-@cindex cygnus configure
-
-The Cygnus configure script predates autoconf.  All of its interesting
-features have been incorporated into autoconf.  No new programs should
-be written to use the Cygnus configure script.
-
-However, the Cygnus configure script is still used in a few places: at
-the top of the Cygnus tree and in a few target libraries in the Cygnus
-tree.  Until those uses have been replaced with autoconf, some brief
-notes are appropriate here.  This is not complete documentation, but it
-should be possible to use this as a guide while examining the scripts
-themselves.
-
-@menu
-* Cygnus Configure Basics::		Cygnus Configure Basics.
-* Cygnus Configure in C++ Libraries::	Cygnus Configure in C++ Libraries.
-@end menu
-
-@node Cygnus Configure Basics
-@section Cygnus Configure Basics
-
-Cygnus configure does not use any generated files; there is no program
-corresponding to @samp{autoconf}.  Instead, there is a single shell
-script named @samp{configure} which may be found at the top of the
-Cygnus tree.  This shell script was written by hand; it was not
-generated by autoconf, and it is incorrect, and indeed harmful, to run
-@samp{autoconf} in the top level of a Cygnus tree.
-
-Cygnus configure works in a particular directory by examining the file
-@file{configure.in} in that directory.  That file is broken into four
-separate shell scripts.
-
-The first is the contents of @file{configure.in} up to a line that
-starts with @samp{# per-host:}.  This is the common part.
-
-The second is the rest of @file{configure.in} up to a line that starts
-with @samp{# per-target:}.  This is the per host part.
-
-The third is the rest of @file{configure.in} up to a line that starts
-with @samp{# post-target:}.  This is the per target part.
-
-The fourth is the remainder of @file{configure.in}.  This is the post
-target part.
-
-If any of these comment lines are missing, the corresponding shell
-script is empty.
-
-Cygnus configure will first execute the common part.  This must set the
-shell variable @samp{srctrigger} to the name of a source file, to
-confirm that Cygnus configure is looking at the right directory.  This
-may set the shell variables @samp{package_makefile_frag} and
-@samp{package_makefile_rules_frag}.
-
-Cygnus configure will next set the @samp{build} and @samp{host} shell
-variables, and execute the per host part.  This may set the shell
-variable @samp{host_makefile_frag}.
-
-Cygnus configure will next set the @samp{target} variable, and execute
-the per target part.  This may set the shell variable
-@samp{target_makefile_frag}.
-
-Any of these scripts may set the @samp{subdirs} shell variable.  This
-variable is a list of subdirectories where a @file{Makefile.in} file may
-be found.  Cygnus configure will automatically look for a
-@file{Makefile.in} file in the current directory.  The @samp{subdirs}
-shell variable is not normally used, and I believe that the only
-directory which uses it at present is @file{newlib}.
-
-For each @file{Makefile.in}, Cygnus configure will automatically create
-a @file{Makefile} by adding definitions for @samp{make} variables such
-as @samp{host} and @samp{target}, and automatically editing the values
-of @samp{make} variables such as @samp{prefix} if they are present.
-
-Also, if any of the @samp{makefile_frag} shell variables are set, Cygnus
-configure will interpret them as file names relative to either the
-working directory or the source directory, and will read the contents of
-the file into the generated @file{Makefile}.  The file contents will be
-read in after the first line in @file{Makefile.in} which starts with
-@samp{####}.
-
-These @file{Makefile} fragments are used to customize behaviour for a
-particular host or target.  They serve to select particular files to
-compile, and to define particular preprocessor macros by providing
-values for @samp{make} variables which are then used during compilation.
-Cygnus configure, unlike autoconf, normally does not do feature tests,
-and normally requires support to be added manually for each new host.
-
-The @file{Makefile} fragment support is similar to the autoconf
-@samp{AC_SUBST_FILE} macro.
-
-After creating each @file{Makefile}, the post target script will be run
-(i.e., it may be run several times).  This script may further customize
-the @file{Makefile}.  When it is run, the shell variable @samp{Makefile}
-will hold the name of the @file{Makefile}, including the appropriate
-directory component.
-
-Like an autoconf generated @file{configure} script, Cygnus configure
-will create a file named @file{config.status} which, when run, will
-automatically recreate the configuration.  The @file{config.status} file
-will simply execute the Cygnus configure script again with the
-appropriate arguments.
-
-Any of the parts of @file{configure.in} may set the shell variables
-@samp{files} and @samp{links}.  Cygnus configure will set up symlinks
-from the names in @samp{links} to the files named in @samp{files}.  This
-is similar to the autoconf @samp{AC_LINK_FILES} macro.
-
-Finally, any of the parts of @file{configure.in} may set the shell
-variable @samp{configdirs} to a set of subdirectories.  If it is set,
-Cygnus configure will recursively run the configure process in each
-subdirectory.  If the subdirectory uses Cygnus configure, it will
-contain a @file{configure.in} file but no @file{configure} file, in
-which case Cygnus configure will invoke itself recursively.  If the
-subdirectory has a @file{configure} file, Cygnus configure assumes that
-it is an autoconf generated @file{configure} script, and simply invokes
-it directly.
-
-@node Cygnus Configure in C++ Libraries
-@section Cygnus Configure in C++ Libraries
-@cindex @file{libstdc++} configure
-@cindex @file{libio} configure
-@cindex @file{libg++} configure
-
-The C++ library configure system, written by Per Bothner, deserves
-special mention.  It uses Cygnus configure, but it does feature testing
-like that done by autoconf generated @file{configure} scripts.  This
-approach is used in the libraries @file{libio}, @file{libstdc++}, and
-@file{libg++}.
-
-Most of the @file{Makefile} information is written out by the shell
-script @file{libio/config.shared}.  Each @file{configure.in} file sets
-certain shell variables, and then invokes @file{config.shared} to create
-two package @file{Makefile} fragments.  These fragments are then
-incorporated into the resulting @file{Makefile} by the Cygnus configure
-script.
-
-The file @file{_G_config.h} is created in the @file{libio} object
-directory by running the shell script @file{libio/gen-params}.  This
-shell script uses feature tests to define macros and typedefs in
-@file{_G_config.h}.
-
-@node Multilibs
-@chapter Multilibs
-@cindex multilibs
-
-For some targets gcc may have different processor requirements depending
-upon command line options.  An obvious example is the
-@samp{-msoft-float} option supported on several processors.  This option
-means that the floating point registers are not available, which means
-that floating point operations must be done by calling an emulation
-subroutine rather than by using machine instructions.
-
-For such options, gcc is often configured to compile target libraries
-twice: once with @samp{-msoft-float} and once without.  When gcc
-compiles target libraries more than once, the resulting libraries are
-called @dfn{multilibs}.
-
-Multilibs are not really part of the GNU configure and build system, but
-we discuss them here since they require support in the @file{configure}
-scripts and @file{Makefile}s used for target libraries.
-
-@menu
-* Multilibs in gcc::		        Multilibs in gcc.
-* Multilibs in Target Libraries::	Multilibs in Target Libraries.
-@end menu
-
-@node Multilibs in gcc
-@section Multilibs in gcc
-
-In gcc, multilibs are defined by setting the variable
-@samp{MULTILIB_OPTIONS} in the target @file{Makefile} fragment.  Several
-other @samp{MULTILIB} variables may also be defined there.  @xref{Target
-Fragment, , The Target Makefile Fragment, gcc, Using and Porting GNU
-CC}.
-
-If you have built gcc, you can see what multilibs it uses by running it
-with the @samp{-print-multi-lib} option.  The output @samp{.;} means
-that no multilibs are used.  In general, the output is a sequence of
-lines, one per multilib.  The first part of each line, up to the
-@samp{;}, is the name of the multilib directory.  The second part is a
-list of compiler options separated by @samp{@@} characters.
-
-Multilibs are built in a tree of directories.  The top of the tree,
-represented by @samp{.} in the list of multilib directories, is the
-default library to use when no special compiler options are used.  The
-subdirectories of the tree hold versions of the library to use when
-particular compiler options are used.
-
-@node Multilibs in Target Libraries
-@section Multilibs in Target Libraries
-
-The target libraries in the Cygnus tree are automatically built with
-multilibs.  That means that each library is built multiple times.
-
-This default is set in the top level @file{configure.in} file, by adding
-@samp{--enable-multilib} to the list of arguments passed to configure
-when it is run for the target libraries (@pxref{Host and Target
-Libraries}).
-
-Each target library uses the shell script @file{config-ml.in}, written
-by Doug Evans, to prepare to build target libraries.  This shell script
-is invoked after the @file{Makefile} has been created by the
-@file{configure} script.  If multilibs are not enabled, it does nothing,
-otherwise it modifies the @file{Makefile} to support multilibs.
-
-The @file{config-ml.in} script makes one copy of the @file{Makefile} for
-each multilib in the appropriate subdirectory.  When configuring in the
-source directory (which is not recommended), it will build a symlink
-tree of the sources in each subdirectory.
-
-The @file{config-ml.in} script sets several variables in the various
-@file{Makefile}s.  The @file{Makefile.in} must have definitions for
-these variables already; @file{config-ml.in} simply changes the existing
-values.  The @file{Makefile} should use default values for these
-variables which will do the right thing in the subdirectories.
-
-@table @samp
-@item MULTISRCTOP
-@file{config-ml.in} will set this to a sequence of @samp{../} strings,
-where the number of strings is the number of multilib levels in the
-source tree.  The default value should be the empty string.
-@item MULTIBUILDTOP
-@file{config-ml.in} will set this to a sequence of @samp{../} strings,
-where the number of strings is number of multilib levels in the object
-directory.  The default value should be the empty string.  This will
-differ from @samp{MULTISRCTOP} when configuring in the source tree
-(which is not recommended).
-@item MULTIDIRS
-In the top level @file{Makefile} only, @file{config-ml.in} will set this
-to the list of multilib subdirectories.  The default value should be the
-empty string.
-@item MULTISUBDIR
-@file{config-ml.in} will set this to the installed subdirectory name to
-use for this subdirectory, with a leading @samp{/}.  The default value
-shold be the empty string.
-@item MULTIDO
-@itemx MULTICLEAN
-In the top level @file{Makefile} only, @file{config-ml.in} will set
-these variables to commands to use when doing a recursive make.  These
-variables should both default to the string @samp{true}, so that by
-default nothing happens.
-@end table
-
-All references to the parent of the source directory should use the
-variable @samp{MULTISRCTOP}.  Instead of writing @samp{$(srcdir)/..},
-you must write @samp{$(srcdir)/$(MULTISRCTOP)..}.
-
-Similarly, references to the parent of the object directory should use
-the variable @samp{MULTIBUILDTOP}.
-
-In the installation target, the libraries should be installed in the
-subdirectory @samp{MULTISUBDIR}.  Instead of installing
-@samp{$(libdir)/libfoo.a}, install
-@samp{$(libdir)$(MULTISUBDIR)/libfoo.a}.
-
-The @file{config-ml.in} script also modifies the top level
-@file{Makefile} to add @samp{multi-do} and @samp{multi-clean} targets
-which are used when building multilibs.
-
-The default target of the @file{Makefile} should include the following
-command:
-@smallexample
-@@$(MULTIDO) $(FLAGS_TO_PASS) DO=all multi-do
-@end smallexample
-@noindent
-This assumes that @samp{$(FLAGS_TO_PASS)} is defined as a set of
-variables to pass to a recursive invocation of @samp{make}.  This will
-build all the multilibs.  Note that the default value of @samp{MULTIDO}
-is @samp{true}, so by default this command will do nothing.  It will
-only do something in the top level @file{Makefile} if multilibs were
-enabled.
-
-The @samp{install} target of the @file{Makefile} should include the
-following command:
-@smallexample
-@@$(MULTIDO) $(FLAGS_TO_PASS) DO=install multi-do
-@end smallexample
-
-In general, any operation, other than clean, which should be performed
-on all the multilibs should use a @samp{$(MULTIDO)} line, setting the
-variable @samp{DO} to the target of each recursive call to @samp{make}.
-
-The @samp{clean} targets (@samp{clean}, @samp{mostlyclean}, etc.) should
-use @samp{$(MULTICLEAN)}.  For example, the @samp{clean} target should
-do this:
-@smallexample
-@@$(MULTICLEAN) DO=clean multi-clean
-@end smallexample
-
-@node FAQ
-@chapter Frequently Asked Questions
-
-@table @asis
-@item Which do I run first, @samp{autoconf} or @samp{automake}?
-Except when you first add autoconf or automake support to a package, you
-shouldn't run either by hand.  Instead, configure with the
-@samp{--enable-maintainer-mode} option, and let @samp{make} take care of
-it.
-
-@cindex undefined macros
-@item @samp{autoconf} says something about undefined macros.
-This means that you have macros in your @file{configure.in} which are
-not defined by @samp{autoconf}.  You may be using an old version of
-@samp{autoconf}; try building and installing a newer one.  Make sure the
-newly installled @samp{autoconf} is first on your @samp{PATH}.  Also,
-see the next question.
-
-@cindex @samp{CY_GNU_GETTEXT} in @file{configure}
-@cindex @samp{AM_PROG_LIBTOOL} in @file{configure}
-@item My @file{configure} script has stuff like @samp{CY_GNU_GETTEXT} in it.
-This means that you have macros in your @file{configure.in} which should
-be defined in your @file{aclocal.m4} file, but aren't.  This usually
-means that @samp{aclocal} was not able to appropriate definitions of the
-macros.  Make sure that you have installed all the packages you need.
-In particular, make sure that you have installed libtool (this is where
-@samp{AM_PROG_LIBTOOL} is defined) and gettext (this is where
-@samp{CY_GNU_GETTEXT} is defined, at least in the Cygnus version of
-gettext).
-
-@cindex @file{Makefile}, garbage characters
-@item My @file{Makefile} has @samp{@@} characters in it.
-This may mean that you tried to use an autoconf substitution in your
-@file{Makefile.in} without adding the appropriate @samp{AC_SUBST} call
-to your @file{configure} script.  Or it may just mean that you need to
-rebuild @file{Makefile} in your build directory.  To rebuild
-@file{Makefile} from @file{Makefile.in}, run the shell script
-@file{config.status} with no arguments.  If you need to force
-@file{configure} to run again, first run @samp{config.status --recheck}.
-These runs are normally done automatically by @file{Makefile} targets,
-but if your @file{Makefile} has gotten messed up you'll need to help
-them along.
-
-@cindex @samp{config.status --recheck}
-@item Why do I have to run both @samp{config.status --recheck} and @samp{config.status}?
-Normally, you don't; they will be run automatically by @file{Makefile}
-targets.  If you do need to run them, use @samp{config.status --recheck}
-to run the @file{configure} script again with the same arguments as the
-first time you ran it.  Use @samp{config.status} (with no arguments) to
-regenerate all files (@file{Makefile}, @file{config.h}, etc.) based on
-the results of the configure script.  The two cases are separate because
-it isn't always necessary to regenerate all the files after running
-@samp{config.status --recheck}.  The @file{Makefile} targets generated
-by automake will use the environment variables @samp{CONFIG_FILES} and
-@samp{CONFIG_HEADERS} to only regenerate files as they are needed.
-
-@item What is the Cygnus tree?
-The Cygnus tree is used for various packages including gdb, the GNU
-binutils, and egcs.  It is also, of course, used for Cygnus releases.
-It is the build system which was developed at Cygnus, using the Cygnus
-configure script.  It permits building many different packages with a
-single configure and make.  The configure scripts in the tree are being
-converted to autoconf, but the general build structure remains intact.
-
-@item Why do I have to keep rebuilding and reinstalling the tools?
-I know, it's a pain.  Unfortunately, there are bugs in the tools
-themselves which need to be fixed, and each time that happens everybody
-who uses the tools need to reinstall new versions of them.  I don't know
-if there is going to be a clever fix until the tools stabilize.
-
-@item Why not just have a Cygnus tree @samp{make} target to update the tools?
-The tools unfortunately need to be installed before they can be used.
-That means that they must be built using an appropriate prefix, and it
-seems unwise to assume that every configuration uses an appropriate
-prefix.  It might be possible to make them work in place, or it might be
-possible to install them in some subdirectory; so far these approaches
-have not been implemented.
-@end table
-
-@node Index
-@unnumbered Index
-
-@printindex cp
-
-@contents
-@bye
diff --git a/etc/fdl.texi b/etc/fdl.texi
deleted file mode 100644
index 7b93651f1..000000000
--- a/etc/fdl.texi
+++ /dev/null
@@ -1,451 +0,0 @@
-@c The GNU Free Documentation License.
-@center Version 1.2, November 2002
-
-@c This file is intended to be included within another document,
-@c hence no sectioning command or @node.  
-
-@display
-Copyright @copyright{} 2000,2001,2002 Free Software Foundation, Inc.
-51 Franklin St, Fifth Floor, Boston, MA  02110-1301, USA
-
-Everyone is permitted to copy and distribute verbatim copies
-of this license document, but changing it is not allowed.
-@end display
-
-@enumerate 0
-@item
-PREAMBLE
-
-The purpose of this License is to make a manual, textbook, or other
-functional and useful document @dfn{free} in the sense of freedom: to
-assure everyone the effective freedom to copy and redistribute it,
-with or without modifying it, either commercially or noncommercially.
-Secondarily, this License preserves for the author and publisher a way
-to get credit for their work, while not being considered responsible
-for modifications made by others.
-
-This License is a kind of ``copyleft'', which means that derivative
-works of the document must themselves be free in the same sense.  It
-complements the GNU General Public License, which is a copyleft
-license designed for free software.
-
-We have designed this License in order to use it for manuals for free
-software, because free software needs free documentation: a free
-program should come with manuals providing the same freedoms that the
-software does.  But this License is not limited to software manuals;
-it can be used for any textual work, regardless of subject matter or
-whether it is published as a printed book.  We recommend this License
-principally for works whose purpose is instruction or reference.
-
-@item
-APPLICABILITY AND DEFINITIONS
-
-This License applies to any manual or other work, in any medium, that
-contains a notice placed by the copyright holder saying it can be
-distributed under the terms of this License.  Such a notice grants a
-world-wide, royalty-free license, unlimited in duration, to use that
-work under the conditions stated herein.  The ``Document'', below,
-refers to any such manual or work.  Any member of the public is a
-licensee, and is addressed as ``you''.  You accept the license if you
-copy, modify or distribute the work in a way requiring permission
-under copyright law.
-
-A ``Modified Version'' of the Document means any work containing the
-Document or a portion of it, either copied verbatim, or with
-modifications and/or translated into another language.
-
-A ``Secondary Section'' is a named appendix or a front-matter section
-of the Document that deals exclusively with the relationship of the
-publishers or authors of the Document to the Document's overall
-subject (or to related matters) and contains nothing that could fall
-directly within that overall subject.  (Thus, if the Document is in
-part a textbook of mathematics, a Secondary Section may not explain
-any mathematics.)  The relationship could be a matter of historical
-connection with the subject or with related matters, or of legal,
-commercial, philosophical, ethical or political position regarding
-them.
-
-The ``Invariant Sections'' are certain Secondary Sections whose titles
-are designated, as being those of Invariant Sections, in the notice
-that says that the Document is released under this License.  If a
-section does not fit the above definition of Secondary then it is not
-allowed to be designated as Invariant.  The Document may contain zero
-Invariant Sections.  If the Document does not identify any Invariant
-Sections then there are none.
-
-The ``Cover Texts'' are certain short passages of text that are listed,
-as Front-Cover Texts or Back-Cover Texts, in the notice that says that
-the Document is released under this License.  A Front-Cover Text may
-be at most 5 words, and a Back-Cover Text may be at most 25 words.
-
-A ``Transparent'' copy of the Document means a machine-readable copy,
-represented in a format whose specification is available to the
-general public, that is suitable for revising the document
-straightforwardly with generic text editors or (for images composed of
-pixels) generic paint programs or (for drawings) some widely available
-drawing editor, and that is suitable for input to text formatters or
-for automatic translation to a variety of formats suitable for input
-to text formatters.  A copy made in an otherwise Transparent file
-format whose markup, or absence of markup, has been arranged to thwart
-or discourage subsequent modification by readers is not Transparent.
-An image format is not Transparent if used for any substantial amount
-of text.  A copy that is not ``Transparent'' is called ``Opaque''.
-
-Examples of suitable formats for Transparent copies include plain
-@sc{ascii} without markup, Texinfo input format, La@TeX{} input
-format, @acronym{SGML} or @acronym{XML} using a publicly available
-@acronym{DTD}, and standard-conforming simple @acronym{HTML},
-PostScript or @acronym{PDF} designed for human modification.  Examples
-of transparent image formats include @acronym{PNG}, @acronym{XCF} and
-@acronym{JPG}.  Opaque formats include proprietary formats that can be
-read and edited only by proprietary word processors, @acronym{SGML} or
-@acronym{XML} for which the @acronym{DTD} and/or processing tools are
-not generally available, and the machine-generated @acronym{HTML},
-PostScript or @acronym{PDF} produced by some word processors for
-output purposes only.
-
-The ``Title Page'' means, for a printed book, the title page itself,
-plus such following pages as are needed to hold, legibly, the material
-this License requires to appear in the title page.  For works in
-formats which do not have any title page as such, ``Title Page'' means
-the text near the most prominent appearance of the work's title,
-preceding the beginning of the body of the text.
-
-A section ``Entitled XYZ'' means a named subunit of the Document whose
-title either is precisely XYZ or contains XYZ in parentheses following
-text that translates XYZ in another language.  (Here XYZ stands for a
-specific section name mentioned below, such as ``Acknowledgements'',
-``Dedications'', ``Endorsements'', or ``History''.)  To ``Preserve the Title''
-of such a section when you modify the Document means that it remains a
-section ``Entitled XYZ'' according to this definition.
-
-The Document may include Warranty Disclaimers next to the notice which
-states that this License applies to the Document.  These Warranty
-Disclaimers are considered to be included by reference in this
-License, but only as regards disclaiming warranties: any other
-implication that these Warranty Disclaimers may have is void and has
-no effect on the meaning of this License.
-
-@item
-VERBATIM COPYING
-
-You may copy and distribute the Document in any medium, either
-commercially or noncommercially, provided that this License, the
-copyright notices, and the license notice saying this License applies
-to the Document are reproduced in all copies, and that you add no other
-conditions whatsoever to those of this License.  You may not use
-technical measures to obstruct or control the reading or further
-copying of the copies you make or distribute.  However, you may accept
-compensation in exchange for copies.  If you distribute a large enough
-number of copies you must also follow the conditions in section 3.
-
-You may also lend copies, under the same conditions stated above, and
-you may publicly display copies.
-
-@item
-COPYING IN QUANTITY
-
-If you publish printed copies (or copies in media that commonly have
-printed covers) of the Document, numbering more than 100, and the
-Document's license notice requires Cover Texts, you must enclose the
-copies in covers that carry, clearly and legibly, all these Cover
-Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on
-the back cover.  Both covers must also clearly and legibly identify
-you as the publisher of these copies.  The front cover must present
-the full title with all words of the title equally prominent and
-visible.  You may add other material on the covers in addition.
-Copying with changes limited to the covers, as long as they preserve
-the title of the Document and satisfy these conditions, can be treated
-as verbatim copying in other respects.
-
-If the required texts for either cover are too voluminous to fit
-legibly, you should put the first ones listed (as many as fit
-reasonably) on the actual cover, and continue the rest onto adjacent
-pages.
-
-If you publish or distribute Opaque copies of the Document numbering
-more than 100, you must either include a machine-readable Transparent
-copy along with each Opaque copy, or state in or with each Opaque copy
-a computer-network location from which the general network-using
-public has access to download using public-standard network protocols
-a complete Transparent copy of the Document, free of added material.
-If you use the latter option, you must take reasonably prudent steps,
-when you begin distribution of Opaque copies in quantity, to ensure
-that this Transparent copy will remain thus accessible at the stated
-location until at least one year after the last time you distribute an
-Opaque copy (directly or through your agents or retailers) of that
-edition to the public.
-
-It is requested, but not required, that you contact the authors of the
-Document well before redistributing any large number of copies, to give
-them a chance to provide you with an updated version of the Document.
-
-@item
-MODIFICATIONS
-
-You may copy and distribute a Modified Version of the Document under
-the conditions of sections 2 and 3 above, provided that you release
-the Modified Version under precisely this License, with the Modified
-Version filling the role of the Document, thus licensing distribution
-and modification of the Modified Version to whoever possesses a copy
-of it.  In addition, you must do these things in the Modified Version:
-
-@enumerate A
-@item
-Use in the Title Page (and on the covers, if any) a title distinct
-from that of the Document, and from those of previous versions
-(which should, if there were any, be listed in the History section
-of the Document).  You may use the same title as a previous version
-if the original publisher of that version gives permission.
-
-@item
-List on the Title Page, as authors, one or more persons or entities
-responsible for authorship of the modifications in the Modified
-Version, together with at least five of the principal authors of the
-Document (all of its principal authors, if it has fewer than five),
-unless they release you from this requirement.
-
-@item
-State on the Title page the name of the publisher of the
-Modified Version, as the publisher.
-
-@item
-Preserve all the copyright notices of the Document.
-
-@item
-Add an appropriate copyright notice for your modifications
-adjacent to the other copyright notices.
-
-@item
-Include, immediately after the copyright notices, a license notice
-giving the public permission to use the Modified Version under the
-terms of this License, in the form shown in the Addendum below.
-
-@item
-Preserve in that license notice the full lists of Invariant Sections
-and required Cover Texts given in the Document's license notice.
-
-@item
-Include an unaltered copy of this License.
-
-@item
-Preserve the section Entitled ``History'', Preserve its Title, and add
-to it an item stating at least the title, year, new authors, and
-publisher of the Modified Version as given on the Title Page.  If
-there is no section Entitled ``History'' in the Document, create one
-stating the title, year, authors, and publisher of the Document as
-given on its Title Page, then add an item describing the Modified
-Version as stated in the previous sentence.
-
-@item
-Preserve the network location, if any, given in the Document for
-public access to a Transparent copy of the Document, and likewise
-the network locations given in the Document for previous versions
-it was based on.  These may be placed in the ``History'' section.
-You may omit a network location for a work that was published at
-least four years before the Document itself, or if the original
-publisher of the version it refers to gives permission.
-
-@item
-For any section Entitled ``Acknowledgements'' or ``Dedications'', Preserve
-the Title of the section, and preserve in the section all the
-substance and tone of each of the contributor acknowledgements and/or
-dedications given therein.
-
-@item
-Preserve all the Invariant Sections of the Document,
-unaltered in their text and in their titles.  Section numbers
-or the equivalent are not considered part of the section titles.
-
-@item
-Delete any section Entitled ``Endorsements''.  Such a section
-may not be included in the Modified Version.
-
-@item
-Do not retitle any existing section to be Entitled ``Endorsements'' or
-to conflict in title with any Invariant Section.
-
-@item
-Preserve any Warranty Disclaimers.
-@end enumerate
-
-If the Modified Version includes new front-matter sections or
-appendices that qualify as Secondary Sections and contain no material
-copied from the Document, you may at your option designate some or all
-of these sections as invariant.  To do this, add their titles to the
-list of Invariant Sections in the Modified Version's license notice.
-These titles must be distinct from any other section titles.
-
-You may add a section Entitled ``Endorsements'', provided it contains
-nothing but endorsements of your Modified Version by various
-parties---for example, statements of peer review or that the text has
-been approved by an organization as the authoritative definition of a
-standard.
-
-You may add a passage of up to five words as a Front-Cover Text, and a
-passage of up to 25 words as a Back-Cover Text, to the end of the list
-of Cover Texts in the Modified Version.  Only one passage of
-Front-Cover Text and one of Back-Cover Text may be added by (or
-through arrangements made by) any one entity.  If the Document already
-includes a cover text for the same cover, previously added by you or
-by arrangement made by the same entity you are acting on behalf of,
-you may not add another; but you may replace the old one, on explicit
-permission from the previous publisher that added the old one.
-
-The author(s) and publisher(s) of the Document do not by this License
-give permission to use their names for publicity for or to assert or
-imply endorsement of any Modified Version.
-
-@item
-COMBINING DOCUMENTS
-
-You may combine the Document with other documents released under this
-License, under the terms defined in section 4 above for modified
-versions, provided that you include in the combination all of the
-Invariant Sections of all of the original documents, unmodified, and
-list them all as Invariant Sections of your combined work in its
-license notice, and that you preserve all their Warranty Disclaimers.
-
-The combined work need only contain one copy of this License, and
-multiple identical Invariant Sections may be replaced with a single
-copy.  If there are multiple Invariant Sections with the same name but
-different contents, make the title of each such section unique by
-adding at the end of it, in parentheses, the name of the original
-author or publisher of that section if known, or else a unique number.
-Make the same adjustment to the section titles in the list of
-Invariant Sections in the license notice of the combined work.
-
-In the combination, you must combine any sections Entitled ``History''
-in the various original documents, forming one section Entitled
-``History''; likewise combine any sections Entitled ``Acknowledgements'',
-and any sections Entitled ``Dedications''.  You must delete all
-sections Entitled ``Endorsements.''
-
-@item
-COLLECTIONS OF DOCUMENTS
-
-You may make a collection consisting of the Document and other documents
-released under this License, and replace the individual copies of this
-License in the various documents with a single copy that is included in
-the collection, provided that you follow the rules of this License for
-verbatim copying of each of the documents in all other respects.
-
-You may extract a single document from such a collection, and distribute
-it individually under this License, provided you insert a copy of this
-License into the extracted document, and follow this License in all
-other respects regarding verbatim copying of that document.
-
-@item
-AGGREGATION WITH INDEPENDENT WORKS
-
-A compilation of the Document or its derivatives with other separate
-and independent documents or works, in or on a volume of a storage or
-distribution medium, is called an ``aggregate'' if the copyright
-resulting from the compilation is not used to limit the legal rights
-of the compilation's users beyond what the individual works permit.
-When the Document is included in an aggregate, this License does not
-apply to the other works in the aggregate which are not themselves
-derivative works of the Document.
-
-If the Cover Text requirement of section 3 is applicable to these
-copies of the Document, then if the Document is less than one half of
-the entire aggregate, the Document's Cover Texts may be placed on
-covers that bracket the Document within the aggregate, or the
-electronic equivalent of covers if the Document is in electronic form.
-Otherwise they must appear on printed covers that bracket the whole
-aggregate.
-
-@item
-TRANSLATION
-
-Translation is considered a kind of modification, so you may
-distribute translations of the Document under the terms of section 4.
-Replacing Invariant Sections with translations requires special
-permission from their copyright holders, but you may include
-translations of some or all Invariant Sections in addition to the
-original versions of these Invariant Sections.  You may include a
-translation of this License, and all the license notices in the
-Document, and any Warranty Disclaimers, provided that you also include
-the original English version of this License and the original versions
-of those notices and disclaimers.  In case of a disagreement between
-the translation and the original version of this License or a notice
-or disclaimer, the original version will prevail.
-
-If a section in the Document is Entitled ``Acknowledgements'',
-``Dedications'', or ``History'', the requirement (section 4) to Preserve
-its Title (section 1) will typically require changing the actual
-title.
-
-@item
-TERMINATION
-
-You may not copy, modify, sublicense, or distribute the Document except
-as expressly provided for under this License.  Any other attempt to
-copy, modify, sublicense or distribute the Document is void, and will
-automatically terminate your rights under this License.  However,
-parties who have received copies, or rights, from you under this
-License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-@item
-FUTURE REVISIONS OF THIS LICENSE
-
-The Free Software Foundation may publish new, revised versions
-of the GNU Free Documentation License from time to time.  Such new
-versions will be similar in spirit to the present version, but may
-differ in detail to address new problems or concerns.  See
-@uref{http://www.gnu.org/copyleft/}.
-
-Each version of the License is given a distinguishing version number.
-If the Document specifies that a particular numbered version of this
-License ``or any later version'' applies to it, you have the option of
-following the terms and conditions either of that specified version or
-of any later version that has been published (not as a draft) by the
-Free Software Foundation.  If the Document does not specify a version
-number of this License, you may choose any version ever published (not
-as a draft) by the Free Software Foundation.
-@end enumerate
-
-@page
-@heading ADDENDUM: How to use this License for your documents
-
-To use this License in a document you have written, include a copy of
-the License in the document and put the following copyright and
-license notices just after the title page:
-
-@smallexample
-@group
-  Copyright (C)  @var{year}  @var{your name}.
-  Permission is granted to copy, distribute and/or modify this document
-  under the terms of the GNU Free Documentation License, Version 1.2
-  or any later version published by the Free Software Foundation;
-  with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
-  Texts.  A copy of the license is included in the section entitled ``GNU
-  Free Documentation License''.
-@end group
-@end smallexample
-
-If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts,
-replace the ``with@dots{}Texts.'' line with this:
-
-@smallexample
-@group
-    with the Invariant Sections being @var{list their titles}, with
-    the Front-Cover Texts being @var{list}, and with the Back-Cover Texts
-    being @var{list}.
-@end group
-@end smallexample
-
-If you have Invariant Sections without Cover Texts, or some other
-combination of the three, merge those two alternatives to suit the
-situation.
-
-If your document contains nontrivial examples of program code, we
-recommend releasing these examples in parallel under your choice of
-free software license, such as the GNU General Public License,
-to permit their use in free software.
-
-@c Local Variables:
-@c ispell-local-pdict: "ispell-dict"
-@c End:
-
diff --git a/etc/make-stds.texi b/etc/make-stds.texi
deleted file mode 100644
index 91a1ed030..000000000
--- a/etc/make-stds.texi
+++ /dev/null
@@ -1,1135 +0,0 @@
-@comment This file is included by both standards.texi and make.texinfo.
-@comment It was broken out of standards.texi on 1/6/93 by roland.
-
-@node Makefile Conventions
-@chapter Makefile Conventions
-@comment standards.texi does not print an index, but make.texinfo does.
-@cindex makefile, conventions for
-@cindex conventions for makefiles
-@cindex standards for makefiles
-
-@c Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 2000, 2001,
-@c 2004, 2005, 2006 Free Software Foundation, Inc.
-
-@c Permission is granted to copy, distribute and/or modify this document
-@c under the terms of the GNU Free Documentation License, Version 1.2
-@c or any later version published by the Free Software Foundation;
-@c with no Invariant Sections, with no
-@c Front-Cover Texts, and with no Back-Cover Texts.
-@c A copy of the license is included in the section entitled ``GNU
-@c Free Documentation License''.
-
-This
-@ifinfo
-node
-@end ifinfo
-@iftex
-@ifset CODESTD
-section
-@end ifset
-@ifclear CODESTD
-chapter
-@end ifclear
-@end iftex
-describes conventions for writing the Makefiles for GNU programs.
-Using Automake will help you write a Makefile that follows these
-conventions.
-
-@menu
-* Makefile Basics::             General conventions for Makefiles.
-* Utilities in Makefiles::      Utilities to be used in Makefiles.
-* Command Variables::           Variables for specifying commands.
-* DESTDIR::                     Supporting staged installs.
-* Directory Variables::         Variables for installation directories.
-* Standard Targets::            Standard targets for users.
-* Install Command Categories::  Three categories of commands in the `install'
-                                  rule: normal, pre-install and post-install.
-@end menu
-
-@node Makefile Basics
-@section General Conventions for Makefiles
-
-Every Makefile should contain this line:
-
-@example
-SHELL = /bin/sh
-@end example
-
-@noindent
-to avoid trouble on systems where the @code{SHELL} variable might be
-inherited from the environment.  (This is never a problem with GNU
-@code{make}.)
-
-Different @code{make} programs have incompatible suffix lists and
-implicit rules, and this sometimes creates confusion or misbehavior.  So
-it is a good idea to set the suffix list explicitly using only the
-suffixes you need in the particular Makefile, like this:
-
-@example
-.SUFFIXES:
-.SUFFIXES: .c .o
-@end example
-
-@noindent
-The first line clears out the suffix list, the second introduces all
-suffixes which may be subject to implicit rules in this Makefile.
-
-Don't assume that @file{.} is in the path for command execution.  When
-you need to run programs that are a part of your package during the
-make, please make sure that it uses @file{./} if the program is built as
-part of the make or @file{$(srcdir)/} if the file is an unchanging part
-of the source code.  Without one of these prefixes, the current search
-path is used.
-
-The distinction between @file{./} (the @dfn{build directory}) and
-@file{$(srcdir)/} (the @dfn{source directory}) is important because
-users can build in a separate directory using the @samp{--srcdir} option
-to @file{configure}.  A rule of the form:
-
-@smallexample
-foo.1 : foo.man sedscript
-        sed -e sedscript foo.man > foo.1
-@end smallexample
-
-@noindent
-will fail when the build directory is not the source directory, because
-@file{foo.man} and @file{sedscript} are in the source directory.
-
-When using GNU @code{make}, relying on @samp{VPATH} to find the source
-file will work in the case where there is a single dependency file,
-since the @code{make} automatic variable @samp{$<} will represent the
-source file wherever it is.  (Many versions of @code{make} set @samp{$<}
-only in implicit rules.)  A Makefile target like
-
-@smallexample
-foo.o : bar.c
-        $(CC) -I. -I$(srcdir) $(CFLAGS) -c bar.c -o foo.o
-@end smallexample
-
-@noindent
-should instead be written as
-
-@smallexample
-foo.o : bar.c
-        $(CC) -I. -I$(srcdir) $(CFLAGS) -c $< -o $@@
-@end smallexample
-
-@noindent
-in order to allow @samp{VPATH} to work correctly.  When the target has
-multiple dependencies, using an explicit @samp{$(srcdir)} is the easiest
-way to make the rule work well.  For example, the target above for
-@file{foo.1} is best written as:
-
-@smallexample
-foo.1 : foo.man sedscript
-        sed -e $(srcdir)/sedscript $(srcdir)/foo.man > $@@
-@end smallexample
-
-GNU distributions usually contain some files which are not source
-files---for example, Info files, and the output from Autoconf, Automake,
-Bison or Flex.  Since these files normally appear in the source
-directory, they should always appear in the source directory, not in the
-build directory.  So Makefile rules to update them should put the
-updated files in the source directory.
-
-However, if a file does not appear in the distribution, then the
-Makefile should not put it in the source directory, because building a
-program in ordinary circumstances should not modify the source directory
-in any way.
-
-Try to make the build and installation targets, at least (and all their
-subtargets) work correctly with a parallel @code{make}.
-
-@node Utilities in Makefiles
-@section Utilities in Makefiles
-
-Write the Makefile commands (and any shell scripts, such as
-@code{configure}) to run in @code{sh}, not in @code{csh}.  Don't use any
-special features of @code{ksh} or @code{bash}.
-
-The @code{configure} script and the Makefile rules for building and
-installation should not use any utilities directly except these:
-
-@c dd find
-@c gunzip gzip md5sum
-@c mkfifo mknod tee uname
-
-@example
-cat cmp cp diff echo egrep expr false grep install-info
-ln ls mkdir mv pwd rm rmdir sed sleep sort tar test touch true
-@end example
-
-The compression program @code{gzip} can be used in the @code{dist} rule.
-
-Stick to the generally supported options for these programs.  For
-example, don't use @samp{mkdir -p}, convenient as it may be, because
-most systems don't support it.
-
-It is a good idea to avoid creating symbolic links in makefiles, since a
-few systems don't support them.
-
-The Makefile rules for building and installation can also use compilers
-and related programs, but should do so via @code{make} variables so that the
-user can substitute alternatives.  Here are some of the programs we
-mean:
-
-@example
-ar bison cc flex install ld ldconfig lex
-make makeinfo ranlib texi2dvi yacc
-@end example
-
-Use the following @code{make} variables to run those programs:
-
-@example
-$(AR) $(BISON) $(CC) $(FLEX) $(INSTALL) $(LD) $(LDCONFIG) $(LEX)
-$(MAKE) $(MAKEINFO) $(RANLIB) $(TEXI2DVI) $(YACC)
-@end example
-
-When you use @code{ranlib} or @code{ldconfig}, you should make sure
-nothing bad happens if the system does not have the program in question.
-Arrange to ignore an error from that command, and print a message before
-the command to tell the user that failure of this command does not mean
-a problem.  (The Autoconf @samp{AC_PROG_RANLIB} macro can help with
-this.)
-
-If you use symbolic links, you should implement a fallback for systems
-that don't have symbolic links.
-
-Additional utilities that can be used via Make variables are:
-
-@example
-chgrp chmod chown mknod
-@end example
-
-It is ok to use other utilities in Makefile portions (or scripts)
-intended only for particular systems where you know those utilities
-exist.
-
-@node Command Variables
-@section Variables for Specifying Commands
-
-Makefiles should provide variables for overriding certain commands, options,
-and so on.
-
-In particular, you should run most utility programs via variables.
-Thus, if you use Bison, have a variable named @code{BISON} whose default
-value is set with @samp{BISON = bison}, and refer to it with
-@code{$(BISON)} whenever you need to use Bison.
-
-File management utilities such as @code{ln}, @code{rm}, @code{mv}, and
-so on, need not be referred to through variables in this way, since users
-don't need to replace them with other programs.
-
-Each program-name variable should come with an options variable that is
-used to supply options to the program.  Append @samp{FLAGS} to the
-program-name variable name to get the options variable name---for
-example, @code{BISONFLAGS}.  (The names @code{CFLAGS} for the C
-compiler, @code{YFLAGS} for yacc, and @code{LFLAGS} for lex, are
-exceptions to this rule, but we keep them because they are standard.)
-Use @code{CPPFLAGS} in any compilation command that runs the
-preprocessor, and use @code{LDFLAGS} in any compilation command that
-does linking as well as in any direct use of @code{ld}.
-
-If there are C compiler options that @emph{must} be used for proper
-compilation of certain files, do not include them in @code{CFLAGS}.
-Users expect to be able to specify @code{CFLAGS} freely themselves.
-Instead, arrange to pass the necessary options to the C compiler
-independently of @code{CFLAGS}, by writing them explicitly in the
-compilation commands or by defining an implicit rule, like this:
-
-@smallexample
-CFLAGS = -g
-ALL_CFLAGS = -I. $(CFLAGS)
-.c.o:
-        $(CC) -c $(CPPFLAGS) $(ALL_CFLAGS) $<
-@end smallexample
-
-Do include the @samp{-g} option in @code{CFLAGS}, because that is not
-@emph{required} for proper compilation.  You can consider it a default
-that is only recommended.  If the package is set up so that it is
-compiled with GCC by default, then you might as well include @samp{-O}
-in the default value of @code{CFLAGS} as well.
-
-Put @code{CFLAGS} last in the compilation command, after other variables
-containing compiler options, so the user can use @code{CFLAGS} to
-override the others.
-
-@code{CFLAGS} should be used in every invocation of the C compiler,
-both those which do compilation and those which do linking.
-
-Every Makefile should define the variable @code{INSTALL}, which is the
-basic command for installing a file into the system.
-
-Every Makefile should also define the variables @code{INSTALL_PROGRAM}
-and @code{INSTALL_DATA}.  (The default for @code{INSTALL_PROGRAM} should
-be @code{$(INSTALL)}; the default for @code{INSTALL_DATA} should be
-@code{$@{INSTALL@} -m 644}.)  Then it should use those variables as the
-commands for actual installation, for executables and non-executables
-respectively.  Minimal use of these variables is as follows:
-
-@example
-$(INSTALL_PROGRAM) foo $(bindir)/foo
-$(INSTALL_DATA) libfoo.a $(libdir)/libfoo.a
-@end example
-
-However, it is preferable to support a @code{DESTDIR} prefix on the
-target files, as explained in the next section.
-
-@noindent
-Always use a file name, not a directory name, as the second argument of
-the installation commands.  Use a separate command for each file to be
-installed.
-
-
-@node DESTDIR
-@section @code{DESTDIR}: support for staged installs
-
-@vindex DESTDIR
-@cindex staged installs
-@cindex installations, staged
-
-@code{DESTDIR} is a variable prepended to each installed target file,
-like this:
-
-@example
-$(INSTALL_PROGRAM) foo $(DESTDIR)$(bindir)/foo
-$(INSTALL_DATA) libfoo.a $(DESTDIR)$(libdir)/libfoo.a
-@end example
-
-The @code{DESTDIR} variable is specified by the user on the @code{make}
-command line.  For example:
-
-@example
-make DESTDIR=/tmp/stage install
-@end example
-
-@noindent
-@code{DESTDIR} should be supported only in the @code{install*} and
-@code{uninstall*} targets, as those are the only targets where it is
-useful.
-
-If your installation step would normally install
-@file{/usr/local/bin/foo} and @file{/usr/local/lib/libfoo.a}, then an
-installation invoked as in the example above would install
-@file{/tmp/stage/usr/local/bin/foo} and
-@file{/tmp/stage/usr/local/lib/libfoo.a} instead.
-
-Prepending the variable @code{DESTDIR} to each target in this way
-provides for @dfn{staged installs}, where the installed files are not
-placed directly into their expected location but are instead copied
-into a temporary location (@code{DESTDIR}).  However, installed files
-maintain their relative directory structure and any embedded file names
-will not be modified.
-
-You should not set the value of @code{DESTDIR} in your @file{Makefile}
-at all; then the files are installed into their expected locations by
-default.  Also, specifying @code{DESTDIR} should not change the
-operation of the software in any way, so its value should not be
-included in any file contents.
-
-@code{DESTDIR} support is commonly used in package creation.  It is
-also helpful to users who want to understand what a given package will
-install where, and to allow users who don't normally have permissions
-to install into protected areas to build and install before gaining
-those permissions.  Finally, it can be useful with tools such as
-@code{stow}, where code is installed in one place but made to appear
-to be installed somewhere else using symbolic links or special mount
-operations.  So, we strongly recommend GNU packages support
-@code{DESTDIR}, though it is not an absolute requirement.
-
-
-@node Directory Variables
-@section Variables for Installation Directories
-
-Installation directories should always be named by variables, so it is
-easy to install in a nonstandard place.  The standard names for these
-variables and the values they should have in GNU packages are
-described below.  They are based on a standard file system layout;
-variants of it are used in GNU/Linux and other modern operating
-systems.
-
-Installers are expected to override these values when calling
-@command{make} (e.g., @kbd{make prefix=/usr install} or
-@command{configure} (e.g., @kbd{configure --prefix=/usr}).  GNU
-packages should not try to guess which value should be appropriate for
-these variables on the system they are being installed onto: use the
-default settings specified here so that all GNU packages behave
-identically, allowing the installer to achieve any desired layout.
-
-These first two variables set the root for the installation.  All the
-other installation directories should be subdirectories of one of
-these two, and nothing should be directly installed into these two
-directories.
-
-@table @code
-@item prefix
-@vindex prefix
-A prefix used in constructing the default values of the variables listed
-below.  The default value of @code{prefix} should be @file{/usr/local}.
-When building the complete GNU system, the prefix will be empty and
-@file{/usr} will be a symbolic link to @file{/}.
-(If you are using Autoconf, write it as @samp{@@prefix@@}.)
-
-Running @samp{make install} with a different value of @code{prefix} from
-the one used to build the program should @emph{not} recompile the
-program.
-
-@item exec_prefix
-@vindex exec_prefix
-A prefix used in constructing the default values of some of the
-variables listed below.  The default value of @code{exec_prefix} should
-be @code{$(prefix)}.
-(If you are using Autoconf, write it as @samp{@@exec_prefix@@}.)
-
-Generally, @code{$(exec_prefix)} is used for directories that contain
-machine-specific files (such as executables and subroutine libraries),
-while @code{$(prefix)} is used directly for other directories.
-
-Running @samp{make install} with a different value of @code{exec_prefix}
-from the one used to build the program should @emph{not} recompile the
-program.
-@end table
-
-Executable programs are installed in one of the following directories.
-
-@table @code
-@item bindir
-@vindex bindir
-The directory for installing executable programs that users can run.
-This should normally be @file{/usr/local/bin}, but write it as
-@file{$(exec_prefix)/bin}.
-(If you are using Autoconf, write it as @samp{@@bindir@@}.)
-
-@item sbindir
-@vindex sbindir
-The directory for installing executable programs that can be run from
-the shell, but are only generally useful to system administrators.  This
-should normally be @file{/usr/local/sbin}, but write it as
-@file{$(exec_prefix)/sbin}.
-(If you are using Autoconf, write it as @samp{@@sbindir@@}.)
-
-@item libexecdir
-@vindex libexecdir
-@comment This paragraph adjusted to avoid overfull hbox --roland 5jul94
-The directory for installing executable programs to be run by other
-programs rather than by users.  This directory should normally be
-@file{/usr/local/libexec}, but write it as @file{$(exec_prefix)/libexec}.
-(If you are using Autoconf, write it as @samp{@@libexecdir@@}.)
-
-The definition of @samp{libexecdir} is the same for all packages, so
-you should install your data in a subdirectory thereof.  Most packages
-install their data under @file{$(libexecdir)/@var{package-name}/},
-possibly within additional subdirectories thereof, such as
-@file{$(libexecdir)/@var{package-name}/@var{machine}/@var{version}}.
-@end table
-
-Data files used by the program during its execution are divided into
-categories in two ways.
-
-@itemize @bullet
-@item
-Some files are normally modified by programs; others are never normally
-modified (though users may edit some of these).
-
-@item
-Some files are architecture-independent and can be shared by all
-machines at a site; some are architecture-dependent and can be shared
-only by machines of the same kind and operating system; others may never
-be shared between two machines.
-@end itemize
-
-This makes for six different possibilities.  However, we want to
-discourage the use of architecture-dependent files, aside from object
-files and libraries.  It is much cleaner to make other data files
-architecture-independent, and it is generally not hard.
-
-Here are the variables Makefiles should use to specify directories
-to put these various kinds of files in:
-
-@table @samp
-@item datarootdir
-The root of the directory tree for read-only architecture-independent
-data files.  This should normally be @file{/usr/local/share}, but
-write it as @file{$(prefix)/share}.  (If you are using Autoconf, write
-it as @samp{@@datarootdir@@}.)  @samp{datadir}'s default value is
-based on this variable; so are @samp{infodir}, @samp{mandir}, and
-others.
-
-@item datadir
-The directory for installing idiosyncratic read-only
-architecture-independent data files for this program.  This is usually
-the same place as @samp{datarootdir}, but we use the two separate
-variables so that you can move these program-specific files without
-altering the location for Info files, man pages, etc.
-
-This should normally be @file{/usr/local/share}, but write it as
-@file{$(datarootdir)}.  (If you are using Autoconf, write it as
-@samp{@@datadir@@}.)
-
-The definition of @samp{datadir} is the same for all packages, so you
-should install your data in a subdirectory thereof.  Most packages
-install their data under @file{$(datadir)/@var{package-name}/}.
-
-@item sysconfdir
-The directory for installing read-only data files that pertain to a
-single machine--that is to say, files for configuring a host.  Mailer
-and network configuration files, @file{/etc/passwd}, and so forth belong
-here.  All the files in this directory should be ordinary ASCII text
-files.  This directory should normally be @file{/usr/local/etc}, but
-write it as @file{$(prefix)/etc}.
-(If you are using Autoconf, write it as @samp{@@sysconfdir@@}.)
-
-Do not install executables here in this directory (they probably belong
-in @file{$(libexecdir)} or @file{$(sbindir)}).  Also do not install
-files that are modified in the normal course of their use (programs
-whose purpose is to change the configuration of the system excluded).
-Those probably belong in @file{$(localstatedir)}.
-
-@item sharedstatedir
-The directory for installing architecture-independent data files which
-the programs modify while they run.  This should normally be
-@file{/usr/local/com}, but write it as @file{$(prefix)/com}.
-(If you are using Autoconf, write it as @samp{@@sharedstatedir@@}.)
-
-@item localstatedir
-The directory for installing data files which the programs modify while
-they run, and that pertain to one specific machine.  Users should never
-need to modify files in this directory to configure the package's
-operation; put such configuration information in separate files that go
-in @file{$(datadir)} or @file{$(sysconfdir)}.  @file{$(localstatedir)}
-should normally be @file{/usr/local/var}, but write it as
-@file{$(prefix)/var}.
-(If you are using Autoconf, write it as @samp{@@localstatedir@@}.)
-@end table
-
-These variables specify the directory for installing certain specific
-types of files, if your program has them.  Every GNU package should
-have Info files, so every program needs @samp{infodir}, but not all
-need @samp{libdir} or @samp{lispdir}.
-
-@table @samp
-@item includedir
-@c rewritten to avoid overfull hbox --roland
-The directory for installing header files to be included by user
-programs with the C @samp{#include} preprocessor directive.  This
-should normally be @file{/usr/local/include}, but write it as
-@file{$(prefix)/include}.
-(If you are using Autoconf, write it as @samp{@@includedir@@}.)
-
-Most compilers other than GCC do not look for header files in directory
-@file{/usr/local/include}.  So installing the header files this way is
-only useful with GCC.  Sometimes this is not a problem because some
-libraries are only really intended to work with GCC.  But some libraries
-are intended to work with other compilers.  They should install their
-header files in two places, one specified by @code{includedir} and one
-specified by @code{oldincludedir}.
-
-@item oldincludedir
-The directory for installing @samp{#include} header files for use with
-compilers other than GCC.  This should normally be @file{/usr/include}.
-(If you are using Autoconf, you can write it as @samp{@@oldincludedir@@}.)
-
-The Makefile commands should check whether the value of
-@code{oldincludedir} is empty.  If it is, they should not try to use
-it; they should cancel the second installation of the header files.
-
-A package should not replace an existing header in this directory unless
-the header came from the same package.  Thus, if your Foo package
-provides a header file @file{foo.h}, then it should install the header
-file in the @code{oldincludedir} directory if either (1) there is no
-@file{foo.h} there or (2) the @file{foo.h} that exists came from the Foo
-package.
-
-To tell whether @file{foo.h} came from the Foo package, put a magic
-string in the file---part of a comment---and @code{grep} for that string.
-
-@item docdir
-The directory for installing documentation files (other than Info) for
-this package.  By default, it should be
-@file{/usr/local/share/doc/@var{yourpkg}}, but it should be written as
-@file{$(datarootdir)/doc/@var{yourpkg}}.  (If you are using Autoconf,
-write it as @samp{@@docdir@@}.)  The @var{yourpkg} subdirectory, which
-may include a version number, prevents collisions among files with
-common names, such as @file{README}.
-
-@item infodir
-The directory for installing the Info files for this package.  By
-default, it should be @file{/usr/local/share/info}, but it should be
-written as @file{$(datarootdir)/info}.  (If you are using Autoconf,
-write it as @samp{@@infodir@@}.)  @code{infodir} is separate from
-@code{docdir} for compatibility with existing practice.
-
-@item htmldir
-@itemx dvidir
-@itemx pdfdir
-@itemx psdir
-Directories for installing documentation files in the particular
-format.  They should all be set to @code{$(docdir)} by default.  (If
-you are using Autoconf, write them as @samp{@@htmldir@@},
-@samp{@@dvidir@@}, etc.)  Packages which supply several translations
-of their documentation should install them in
-@samp{$(htmldir)/}@var{ll}, @samp{$(pdfdir)/}@var{ll}, etc. where
-@var{ll} is a locale abbreviation such as @samp{en} or @samp{pt_BR}.
-
-@item libdir
-The directory for object files and libraries of object code.  Do not
-install executables here, they probably ought to go in @file{$(libexecdir)}
-instead.  The value of @code{libdir} should normally be
-@file{/usr/local/lib}, but write it as @file{$(exec_prefix)/lib}.
-(If you are using Autoconf, write it as @samp{@@libdir@@}.)
-
-@item lispdir
-The directory for installing any Emacs Lisp files in this package.  By
-default, it should be @file{/usr/local/share/emacs/site-lisp}, but it
-should be written as @file{$(datarootdir)/emacs/site-lisp}.
-
-If you are using Autoconf, write the default as @samp{@@lispdir@@}.
-In order to make @samp{@@lispdir@@} work, you need the following lines
-in your @file{configure.in} file:
-
-@example
-lispdir='$@{datarootdir@}/emacs/site-lisp'
-AC_SUBST(lispdir)
-@end example
-
-@item localedir
-The directory for installing locale-specific message catalogs for this
-package.  By default, it should be @file{/usr/local/share/locale}, but
-it should be written as @file{$(datarootdir)/locale}.  (If you are
-using Autoconf, write it as @samp{@@localedir@@}.)  This directory
-usually has a subdirectory per locale.
-@end table
-
-Unix-style man pages are installed in one of the following:
-
-@table @samp
-@item mandir
-The top-level directory for installing the man pages (if any) for this
-package.  It will normally be @file{/usr/local/share/man}, but you
-should write it as @file{$(datarootdir)/man}.  (If you are using
-Autoconf, write it as @samp{@@mandir@@}.)
-
-@item man1dir
-The directory for installing section 1 man pages.  Write it as
-@file{$(mandir)/man1}.
-@item man2dir
-The directory for installing section 2 man pages.  Write it as
-@file{$(mandir)/man2}
-@item @dots{}
-
-@strong{Don't make the primary documentation for any GNU software be a
-man page.  Write a manual in Texinfo instead.  Man pages are just for
-the sake of people running GNU software on Unix, which is a secondary
-application only.}
-
-@item manext
-The file name extension for the installed man page.  This should contain
-a period followed by the appropriate digit; it should normally be @samp{.1}.
-
-@item man1ext
-The file name extension for installed section 1 man pages.
-@item man2ext
-The file name extension for installed section 2 man pages.
-@item @dots{}
-Use these names instead of @samp{manext} if the package needs to install man
-pages in more than one section of the manual.
-@end table
-
-And finally, you should set the following variable:
-
-@table @samp
-@item srcdir
-The directory for the sources being compiled.  The value of this
-variable is normally inserted by the @code{configure} shell script.
-(If you are using Autoconf, use @samp{srcdir = @@srcdir@@}.)
-@end table
-
-For example:
-
-@smallexample
-@c I have changed some of the comments here slightly to fix an overfull
-@c hbox, so the make manual can format correctly. --roland
-# Common prefix for installation directories.
-# NOTE: This directory must exist when you start the install.
-prefix = /usr/local
-datarootdir = $(prefix)/share
-datadir = $(datarootdir)
-exec_prefix = $(prefix)
-# Where to put the executable for the command `gcc'.
-bindir = $(exec_prefix)/bin
-# Where to put the directories used by the compiler.
-libexecdir = $(exec_prefix)/libexec
-# Where to put the Info files.
-infodir = $(datarootdir)/info
-@end smallexample
-
-If your program installs a large number of files into one of the
-standard user-specified directories, it might be useful to group them
-into a subdirectory particular to that program.  If you do this, you
-should write the @code{install} rule to create these subdirectories.
-
-Do not expect the user to include the subdirectory name in the value of
-any of the variables listed above.  The idea of having a uniform set of
-variable names for installation directories is to enable the user to
-specify the exact same values for several different GNU packages.  In
-order for this to be useful, all the packages must be designed so that
-they will work sensibly when the user does so.
-
-At times, not all of these variables may be implemented in the current
-release of Autoconf and/or Automake; but as of Autoconf@tie{}2.60, we
-believe all of them are.  When any are missing, the descriptions here
-serve as specifications for what Autoconf will implement.  As a
-programmer, you can either use a development version of Autoconf or
-avoid using these variables until a stable release is made which
-supports them.
-
-
-@node Standard Targets
-@section Standard Targets for Users
-
-All GNU programs should have the following targets in their Makefiles:
-
-@table @samp
-@item all
-Compile the entire program.  This should be the default target.  This
-target need not rebuild any documentation files; Info files should
-normally be included in the distribution, and DVI (and other
-documentation format) files should be made only when explicitly asked
-for.
-
-By default, the Make rules should compile and link with @samp{-g}, so
-that executable programs have debugging symbols.  Users who don't mind
-being helpless can strip the executables later if they wish.
-
-@item install
-Compile the program and copy the executables, libraries, and so on to
-the file names where they should reside for actual use.  If there is a
-simple test to verify that a program is properly installed, this target
-should run that test.
-
-Do not strip executables when installing them.  Devil-may-care users can
-use the @code{install-strip} target to do that.
-
-If possible, write the @code{install} target rule so that it does not
-modify anything in the directory where the program was built, provided
-@samp{make all} has just been done.  This is convenient for building the
-program under one user name and installing it under another.
-
-The commands should create all the directories in which files are to be
-installed, if they don't already exist.  This includes the directories
-specified as the values of the variables @code{prefix} and
-@code{exec_prefix}, as well as all subdirectories that are needed.
-One way to do this is by means of an @code{installdirs} target
-as described below.
-
-Use @samp{-} before any command for installing a man page, so that
-@code{make} will ignore any errors.  This is in case there are systems
-that don't have the Unix man page documentation system installed.
-
-The way to install Info files is to copy them into @file{$(infodir)}
-with @code{$(INSTALL_DATA)} (@pxref{Command Variables}), and then run
-the @code{install-info} program if it is present.  @code{install-info}
-is a program that edits the Info @file{dir} file to add or update the
-menu entry for the given Info file; it is part of the Texinfo package.
-Here is a sample rule to install an Info file:
-
-@comment This example has been carefully formatted for the Make manual.
-@comment Please do not reformat it without talking to bug-make@gnu.org.
-@smallexample
-$(DESTDIR)$(infodir)/foo.info: foo.info
-        $(POST_INSTALL)
-# There may be a newer info file in . than in srcdir.
-        -if test -f foo.info; then d=.; \
-         else d=$(srcdir); fi; \
-        $(INSTALL_DATA) $$d/foo.info $(DESTDIR)$@@; \
-# Run install-info only if it exists.
-# Use `if' instead of just prepending `-' to the
-# line so we notice real errors from install-info.
-# We use `$(SHELL) -c' because some shells do not
-# fail gracefully when there is an unknown command.
-        if $(SHELL) -c 'install-info --version' \
-           >/dev/null 2>&1; then \
-          install-info --dir-file=$(DESTDIR)$(infodir)/dir \
-                       $(DESTDIR)$(infodir)/foo.info; \
-        else true; fi
-@end smallexample
-
-When writing the @code{install} target, you must classify all the
-commands into three categories: normal ones, @dfn{pre-installation}
-commands and @dfn{post-installation} commands.  @xref{Install Command
-Categories}.
-
-@item install-html
-@itemx install-dvi
-@itemx install-pdf
-@itemx install-ps
-These targets install documentation in formats other than Info;
-they're intended to be called explicitly by the person installing the
-package, if that format is desired.  GNU prefers Info files, so these
-must be installed by the @code{install} target.
-
-When you have many documentation files to install, we recommend that
-you avoid collisions and clutter by arranging for these targets to
-install in subdirectories of the appropriate installation directory,
-such as @code{htmldir}.  As one example, if your package has multiple
-manuals, and you wish to install HTML documentation with many files
-(such as the ``split'' mode output by @code{makeinfo --html}), you'll
-certainly want to use subdirectories, or two nodes with the same name
-in different manuals will overwrite each other.
-
-Please make these @code{install-@var{format}} targets invoke the
-commands for the @var{format} target, for example, by making
-@var{format} a dependency.
-
-@item uninstall
-Delete all the installed files---the copies that the @samp{install}
-and @samp{install-*} targets create.
-
-This rule should not modify the directories where compilation is done,
-only the directories where files are installed.
-
-The uninstallation commands are divided into three categories, just like
-the installation commands.  @xref{Install Command Categories}.
-
-@item install-strip
-Like @code{install}, but strip the executable files while installing
-them.  In simple cases, this target can use the @code{install} target in
-a simple way:
-
-@smallexample
-install-strip:
-        $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' \
-                install
-@end smallexample
-
-But if the package installs scripts as well as real executables, the
-@code{install-strip} target can't just refer to the @code{install}
-target; it has to strip the executables but not the scripts.
-
-@code{install-strip} should not strip the executables in the build
-directory which are being copied for installation.  It should only strip
-the copies that are installed.
-
-Normally we do not recommend stripping an executable unless you are sure
-the program has no bugs.  However, it can be reasonable to install a
-stripped executable for actual execution while saving the unstripped
-executable elsewhere in case there is a bug.
-
-@comment The gratuitous blank line here is to make the table look better
-@comment in the printed Make manual.  Please leave it in.
-@item clean
-
-Delete all files in the current directory that are normally created by
-building the program.  Also delete files in other directories if they
-are created by this makefile.  However, don't delete the files that
-record the configuration.  Also preserve files that could be made by
-building, but normally aren't because the distribution comes with
-them.  There is no need to delete parent directories that were created
-with @samp{mkdir -p}, since they could have existed anyway.
-
-Delete @file{.dvi} files here if they are not part of the distribution.
-
-@item distclean
-Delete all files in the current directory (or created by this
-makefile) that are created by configuring or building the program.  If
-you have unpacked the source and built the program without creating
-any other files, @samp{make distclean} should leave only the files
-that were in the distribution.  However, there is no need to delete
-parent directories that were created with @samp{mkdir -p}, since they
-could have existed anyway.
-
-@item mostlyclean
-Like @samp{clean}, but may refrain from deleting a few files that people
-normally don't want to recompile.  For example, the @samp{mostlyclean}
-target for GCC does not delete @file{libgcc.a}, because recompiling it
-is rarely necessary and takes a lot of time.
-
-@item maintainer-clean
-Delete almost everything that can be reconstructed with this Makefile.
-This typically includes everything deleted by @code{distclean}, plus
-more: C source files produced by Bison, tags tables, Info files, and
-so on.
-
-The reason we say ``almost everything'' is that running the command
-@samp{make maintainer-clean} should not delete @file{configure} even
-if @file{configure} can be remade using a rule in the Makefile.  More
-generally, @samp{make maintainer-clean} should not delete anything
-that needs to exist in order to run @file{configure} and then begin to
-build the program.  Also, there is no need to delete parent
-directories that were created with @samp{mkdir -p}, since they could
-have existed anyway.  These are the only exceptions;
-@code{maintainer-clean} should delete everything else that can be
-rebuilt.
-
-The @samp{maintainer-clean} target is intended to be used by a maintainer of
-the package, not by ordinary users.  You may need special tools to
-reconstruct some of the files that @samp{make maintainer-clean} deletes.
-Since these files are normally included in the distribution, we don't
-take care to make them easy to reconstruct.  If you find you need to
-unpack the full distribution again, don't blame us.
-
-To help make users aware of this, the commands for the special
-@code{maintainer-clean} target should start with these two:
-
-@smallexample
-@@echo 'This command is intended for maintainers to use; it'
-@@echo 'deletes files that may need special tools to rebuild.'
-@end smallexample
-
-@item TAGS
-Update a tags table for this program.
-@c ADR: how?
-
-@item info
-Generate any Info files needed.  The best way to write the rules is as
-follows:
-
-@smallexample
-info: foo.info
-
-foo.info: foo.texi chap1.texi chap2.texi
-        $(MAKEINFO) $(srcdir)/foo.texi
-@end smallexample
-
-@noindent
-You must define the variable @code{MAKEINFO} in the Makefile.  It should
-run the @code{makeinfo} program, which is part of the Texinfo
-distribution.
-
-Normally a GNU distribution comes with Info files, and that means the
-Info files are present in the source directory.  Therefore, the Make
-rule for an info file should update it in the source directory.  When
-users build the package, ordinarily Make will not update the Info files
-because they will already be up to date.
-
-@item dvi
-@itemx html
-@itemx pdf
-@itemx ps
-Generate documentation files in the given format.  These targets
-should always exist, but any or all can be a no-op if the given output
-format cannot be generated.  These targets should not be dependencies
-of the @code{all} target; the user must manually invoke them.
-
-Here's an example rule for generating DVI files from Texinfo:
-
-@smallexample
-dvi: foo.dvi
-
-foo.dvi: foo.texi chap1.texi chap2.texi
-        $(TEXI2DVI) $(srcdir)/foo.texi
-@end smallexample
-
-@noindent
-You must define the variable @code{TEXI2DVI} in the Makefile.  It should
-run the program @code{texi2dvi}, which is part of the Texinfo
-distribution.@footnote{@code{texi2dvi} uses @TeX{} to do the real work
-of formatting. @TeX{} is not distributed with Texinfo.}  Alternatively,
-write just the dependencies, and allow GNU @code{make} to provide the command.
-
-Here's another example, this one for generating HTML from Texinfo:
-
-@smallexample
-html: foo.html
-
-foo.html: foo.texi chap1.texi chap2.texi
-        $(TEXI2HTML) $(srcdir)/foo.texi
-@end smallexample
-
-@noindent
-Again, you would define the variable @code{TEXI2HTML} in the Makefile;
-for example, it might run @code{makeinfo --no-split --html}
-(@command{makeinfo} is part of the Texinfo distribution).
-
-@item dist
-Create a distribution tar file for this program.  The tar file should be
-set up so that the file names in the tar file start with a subdirectory
-name which is the name of the package it is a distribution for.  This
-name can include the version number.
-
-For example, the distribution tar file of GCC version 1.40 unpacks into
-a subdirectory named @file{gcc-1.40}.
-
-The easiest way to do this is to create a subdirectory appropriately
-named, use @code{ln} or @code{cp} to install the proper files in it, and
-then @code{tar} that subdirectory.
-
-Compress the tar file with @code{gzip}.  For example, the actual
-distribution file for GCC version 1.40 is called @file{gcc-1.40.tar.gz}.
-
-The @code{dist} target should explicitly depend on all non-source files
-that are in the distribution, to make sure they are up to date in the
-distribution.
-@ifset CODESTD
-@xref{Releases, , Making Releases}.
-@end ifset
-@ifclear CODESTD
-@xref{Releases, , Making Releases, standards, GNU Coding Standards}.
-@end ifclear
-
-@item check
-Perform self-tests (if any).  The user must build the program before
-running the tests, but need not install the program; you should write
-the self-tests so that they work when the program is built but not
-installed.
-@end table
-
-The following targets are suggested as conventional names, for programs
-in which they are useful.
-
-@table @code
-@item installcheck
-Perform installation tests (if any).  The user must build and install
-the program before running the tests.  You should not assume that
-@file{$(bindir)} is in the search path.
-
-@item installdirs
-It's useful to add a target named @samp{installdirs} to create the
-directories where files are installed, and their parent directories.
-There is a script called @file{mkinstalldirs} which is convenient for
-this; you can find it in the Texinfo package.
-@c It's in /gd/gnu/lib/mkinstalldirs.
-You can use a rule like this:
-
-@comment This has been carefully formatted to look decent in the Make manual.
-@comment Please be sure not to make it extend any further to the right.--roland
-@smallexample
-# Make sure all installation directories (e.g. $(bindir))
-# actually exist by making them if necessary.
-installdirs: mkinstalldirs
-        $(srcdir)/mkinstalldirs $(bindir) $(datadir) \
-                                $(libdir) $(infodir) \
-                                $(mandir)
-@end smallexample
-
-@noindent
-or, if you wish to support @env{DESTDIR},
-
-@smallexample
-# Make sure all installation directories (e.g. $(bindir))
-# actually exist by making them if necessary.
-installdirs: mkinstalldirs
-        $(srcdir)/mkinstalldirs \
-            $(DESTDIR)$(bindir) $(DESTDIR)$(datadir) \
-            $(DESTDIR)$(libdir) $(DESTDIR)$(infodir) \
-            $(DESTDIR)$(mandir)
-@end smallexample
-
-This rule should not modify the directories where compilation is done.
-It should do nothing but create installation directories.
-@end table
-
-@node Install Command Categories
-@section Install Command Categories
-
-@cindex pre-installation commands
-@cindex post-installation commands
-When writing the @code{install} target, you must classify all the
-commands into three categories: normal ones, @dfn{pre-installation}
-commands and @dfn{post-installation} commands.
-
-Normal commands move files into their proper places, and set their
-modes.  They may not alter any files except the ones that come entirely
-from the package they belong to.
-
-Pre-installation and post-installation commands may alter other files;
-in particular, they can edit global configuration files or data bases.
-
-Pre-installation commands are typically executed before the normal
-commands, and post-installation commands are typically run after the
-normal commands.
-
-The most common use for a post-installation command is to run
-@code{install-info}.  This cannot be done with a normal command, since
-it alters a file (the Info directory) which does not come entirely and
-solely from the package being installed.  It is a post-installation
-command because it needs to be done after the normal command which
-installs the package's Info files.
-
-Most programs don't need any pre-installation commands, but we have the
-feature just in case it is needed.
-
-To classify the commands in the @code{install} rule into these three
-categories, insert @dfn{category lines} among them.  A category line
-specifies the category for the commands that follow.
-
-A category line consists of a tab and a reference to a special Make
-variable, plus an optional comment at the end.  There are three
-variables you can use, one for each category; the variable name
-specifies the category.  Category lines are no-ops in ordinary execution
-because these three Make variables are normally undefined (and you
-@emph{should not} define them in the makefile).
-
-Here are the three possible category lines, each with a comment that
-explains what it means:
-
-@smallexample
-        $(PRE_INSTALL)     # @r{Pre-install commands follow.}
-        $(POST_INSTALL)    # @r{Post-install commands follow.}
-        $(NORMAL_INSTALL)  # @r{Normal commands follow.}
-@end smallexample
-
-If you don't use a category line at the beginning of the @code{install}
-rule, all the commands are classified as normal until the first category
-line.  If you don't use any category lines, all the commands are
-classified as normal.
-
-These are the category lines for @code{uninstall}:
-
-@smallexample
-        $(PRE_UNINSTALL)     # @r{Pre-uninstall commands follow.}
-        $(POST_UNINSTALL)    # @r{Post-uninstall commands follow.}
-        $(NORMAL_UNINSTALL)  # @r{Normal commands follow.}
-@end smallexample
-
-Typically, a pre-uninstall command would be used for deleting entries
-from the Info directory.
-
-If the @code{install} or @code{uninstall} target has any dependencies
-which act as subroutines of installation, then you should start
-@emph{each} dependency's commands with a category line, and start the
-main target's commands with a category line also.  This way, you can
-ensure that each command is placed in the right category regardless of
-which of the dependencies actually run.
-
-Pre-installation and post-installation commands should not run any
-programs except for these:
-
-@example
-[ basename bash cat chgrp chmod chown cmp cp dd diff echo
-egrep expand expr false fgrep find getopt grep gunzip gzip
-hostname install install-info kill ldconfig ln ls md5sum
-mkdir mkfifo mknod mv printenv pwd rm rmdir sed sort tee
-test touch true uname xargs yes
-@end example
-
-@cindex binary packages
-The reason for distinguishing the commands in this way is for the sake
-of making binary packages.  Typically a binary package contains all the
-executables and other files that need to be installed, and has its own
-method of installing them---so it does not need to run the normal
-installation commands.  But installing the binary package does need to
-execute the pre-installation and post-installation commands.
-
-Programs to build binary packages work by extracting the
-pre-installation and post-installation commands.  Here is one way of
-extracting the pre-installation commands (the @option{-s} option to
-@command{make} is needed to silence messages about entering
-subdirectories):
-
-@smallexample
-make -s -n install -o all \
-      PRE_INSTALL=pre-install \
-      POST_INSTALL=post-install \
-      NORMAL_INSTALL=normal-install \
-  | gawk -f pre-install.awk
-@end smallexample
-
-@noindent
-where the file @file{pre-install.awk} could contain this:
-
-@smallexample
-$0 ~ /^(normal-install|post-install)[ \t]*$/ @{on = 0@}
-on @{print $0@}
-$0 ~ /^pre-install[ \t]*$/ @{on = 1@}
-@end smallexample
diff --git a/etc/standards.texi b/etc/standards.texi
deleted file mode 100644
index 821b60efe..000000000
--- a/etc/standards.texi
+++ /dev/null
@@ -1,4167 +0,0 @@
-\input texinfo @c -*-texinfo-*-
-@c %**start of header
-@setfilename standards.info
-@settitle GNU Coding Standards
-@c This date is automagically updated when you save this file:
-@set lastupdate July 22, 2007
-@c %**end of header
-
-@dircategory GNU organization
-@direntry
-* Standards: (standards).         GNU coding standards.
-@end direntry
-
-@c @setchapternewpage odd
-@setchapternewpage off
-
-@c Put everything in one index (arbitrarily chosen to be the concept index).
-@syncodeindex fn cp
-@syncodeindex ky cp
-@syncodeindex pg cp
-@syncodeindex vr cp
-
-@c This is used by a cross ref in make-stds.texi
-@set CODESTD  1
-@iftex
-@set CHAPTER chapter
-@end iftex
-@ifinfo
-@set CHAPTER node
-@end ifinfo
-
-@copying
-The GNU coding standards, last updated @value{lastupdate}.
-
-Copyright @copyright{} 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 Free Software
-Foundation, Inc.
-
-Permission is granted to copy, distribute and/or modify this document
-under the terms of the GNU Free Documentation License, Version 1.2
-or any later version published by the Free Software Foundation;
-with no Invariant Sections, with no
-Front-Cover Texts, and with no Back-Cover Texts.
-A copy of the license is included in the section entitled ``GNU
-Free Documentation License''.
-@end copying
-
-@titlepage
-@title GNU Coding Standards
-@author Richard Stallman, et al.
-@author last updated @value{lastupdate}
-@page
-@vskip 0pt plus 1filll
-@insertcopying
-@end titlepage
-
-@contents
-
-@ifnottex
-@node Top, Preface, (dir), (dir)
-@top Version
-
-@insertcopying
-@end ifnottex
-
-@menu
-* Preface::                     About the GNU Coding Standards.
-* Legal Issues::                Keeping free software free.
-* Design Advice::               General program design.
-* Program Behavior::            Program behavior for all programs
-* Writing C::                   Making the best use of C.
-* Documentation::               Documenting programs.
-* Managing Releases::           The release process.
-* References::                  Mentioning non-free software or documentation.
-* GNU Free Documentation License::  Copying and sharing this manual.
-* Index::
-
-@end menu
-
-@node Preface
-@chapter About the GNU Coding Standards
-
-The GNU Coding Standards were written by Richard Stallman and other GNU
-Project volunteers.  Their purpose is to make the GNU system clean,
-consistent, and easy to install.  This document can also be read as a
-guide to writing portable, robust and reliable programs.  It focuses on
-programs written in C, but many of the rules and principles are useful
-even if you write in another programming language.  The rules often
-state reasons for writing in a certain way.
-
-This release of the GNU Coding Standards was last updated
-@value{lastupdate}.
-
-@cindex where to obtain @code{standards.texi}
-@cindex downloading this manual
-If you did not obtain this file directly from the GNU project and
-recently, please check for a newer version.  You can get the GNU
-Coding Standards from the GNU web server in many
-different formats, including the Texinfo source, PDF, HTML, DVI, plain
-text, and more, at: @uref{http://www.gnu.org/prep/standards/}.
-
-Corrections or suggestions for this document should be sent to
-@email{bug-standards@@gnu.org}.  If you make a suggestion, please include a
-suggested new wording for it; our time is limited.  We prefer a context
-diff to the @file{standards.texi} or @file{make-stds.texi} files, but if
-you don't have those files, please mail your suggestion anyway.
-
-These standards cover the minimum of what is important when writing a
-GNU package.  Likely, the need for additional standards will come up.
-Sometimes, you might suggest that such standards be added to this
-document.  If you think your standards would be generally useful, please
-do suggest them.
-
-You should also set standards for your package on many questions not
-addressed or not firmly specified here.  The most important point is to
-be self-consistent---try to stick to the conventions you pick, and try
-to document them as much as possible.  That way, your program will be
-more maintainable by others.
-
-The GNU Hello program serves as an example of how to follow the GNU
-coding standards for a trivial program.
-@uref{http://www.gnu.org/software/hello/hello.html}.
-
-@node Legal Issues
-@chapter Keeping Free Software Free
-@cindex legal aspects
-
-This chapter discusses how you can make sure that GNU software
-avoids legal difficulties, and other related issues.
-
-@menu
-* Reading Non-Free Code::       Referring to proprietary programs.
-* Contributions::               Accepting contributions.
-* Trademarks::                  How we deal with trademark issues.
-@end menu
-
-@node Reading Non-Free Code
-@section Referring to Proprietary Programs
-@cindex proprietary programs
-@cindex avoiding proprietary code
-
-Don't in any circumstances refer to Unix source code for or during
-your work on GNU!  (Or to any other proprietary programs.)
-
-If you have a vague recollection of the internals of a Unix program,
-this does not absolutely mean you can't write an imitation of it, but
-do try to organize the imitation internally along different lines,
-because this is likely to make the details of the Unix version
-irrelevant and dissimilar to your results.
-
-For example, Unix utilities were generally optimized to minimize
-memory use; if you go for speed instead, your program will be very
-different.  You could keep the entire input file in memory and scan it
-there instead of using stdio.  Use a smarter algorithm discovered more
-recently than the Unix program.  Eliminate use of temporary files.  Do
-it in one pass instead of two (we did this in the assembler).
-
-Or, on the contrary, emphasize simplicity instead of speed.  For some
-applications, the speed of today's computers makes simpler algorithms
-adequate.
-
-Or go for generality.  For example, Unix programs often have static
-tables or fixed-size strings, which make for arbitrary limits; use
-dynamic allocation instead.  Make sure your program handles NULs and
-other funny characters in the input files.  Add a programming language
-for extensibility and write part of the program in that language.
-
-Or turn some parts of the program into independently usable libraries.
-Or use a simple garbage collector instead of tracking precisely when
-to free memory, or use a new GNU facility such as obstacks.
-
-@node Contributions
-@section Accepting Contributions
-@cindex legal papers
-@cindex accepting contributions
-
-If the program you are working on is copyrighted by the Free Software
-Foundation, then when someone else sends you a piece of code to add to
-the program, we need legal papers to use it---just as we asked you to
-sign papers initially.  @emph{Each} person who makes a nontrivial
-contribution to a program must sign some sort of legal papers in order
-for us to have clear title to the program; the main author alone is not
-enough.
-
-So, before adding in any contributions from other people, please tell
-us, so we can arrange to get the papers.  Then wait until we tell you
-that we have received the signed papers, before you actually use the
-contribution.
-
-This applies both before you release the program and afterward.  If
-you receive diffs to fix a bug, and they make significant changes, we
-need legal papers for that change.
-
-This also applies to comments and documentation files.  For copyright
-law, comments and code are just text.  Copyright applies to all kinds of
-text, so we need legal papers for all kinds.
-
-We know it is frustrating to ask for legal papers; it's frustrating for
-us as well.  But if you don't wait, you are going out on a limb---for
-example, what if the contributor's employer won't sign a disclaimer?
-You might have to take that code out again!
-
-You don't need papers for changes of a few lines here or there, since
-they are not significant for copyright purposes.  Also, you don't need
-papers if all you get from the suggestion is some ideas, not actual code
-which you use.  For example, if someone sent you one implementation, but
-you write a different implementation of the same idea, you don't need to
-get papers.
-
-The very worst thing is if you forget to tell us about the other
-contributor.  We could be very embarrassed in court some day as a
-result.
-
-We have more detailed advice for maintainers of programs; if you have
-reached the stage of actually maintaining a program for GNU (whether
-released or not), please ask us for a copy.  It is also available
-online for your perusal: @uref{http://www.gnu.org/prep/maintain/}.
-
-@node Trademarks
-@section Trademarks
-@cindex trademarks
-
-Please do not include any trademark acknowledgements in GNU software
-packages or documentation.
-
-Trademark acknowledgements are the statements that such-and-such is a
-trademark of so-and-so.  The GNU Project has no objection to the basic
-idea of trademarks, but these acknowledgements feel like kowtowing,
-and there is no legal requirement for them, so we don't use them.
-
-What is legally required, as regards other people's trademarks, is to
-avoid using them in ways which a reader might reasonably understand as
-naming or labeling our own programs or activities.  For example, since
-``Objective C'' is (or at least was) a trademark, we made sure to say
-that we provide a ``compiler for the Objective C language'' rather
-than an ``Objective C compiler''.  The latter would have been meant as
-a shorter way of saying the former, but it does not explicitly state
-the relationship, so it could be misinterpreted as using ``Objective
-C'' as a label for the compiler rather than for the language.
-
-Please don't use ``win'' as an abbreviation for Microsoft Windows in
-GNU software or documentation.  In hacker terminology, calling
-something a ``win'' is a form of praise.  If you wish to praise
-Microsoft Windows when speaking on your own, by all means do so, but
-not in GNU software.  Usually we write the name ``Windows'' in full,
-but when brevity is very important (as in file names and sometimes
-symbol names), we abbreviate it to ``w''.  For instance, the files and
-functions in Emacs that deal with Windows start with @samp{w32}.
-
-@node Design Advice
-@chapter General Program Design
-@cindex program design
-
-This chapter discusses some of the issues you should take into
-account when designing your program.
-
-@c                         Standard or ANSI C
-@c
-@c In 1989 the American National Standards Institute (ANSI) standardized
-@c C   as  standard  X3.159-1989.    In  December   of  that   year  the
-@c International Standards Organization ISO  adopted the ANSI C standard
-@c making  minor changes.   In 1990  ANSI then  re-adopted  ISO standard
-@c C. This version of C is known as either ANSI C or Standard C.
-
-@c A major revision of the C Standard appeared in 1999.
-
-@menu
-* Source Language::             Which languages to use.
-* Compatibility::               Compatibility with other implementations.
-* Using Extensions::            Using non-standard features.
-* Standard C::                  Using standard C features.
-* Conditional Compilation::     Compiling code only if a conditional is true.
-@end menu
-
-@node Source Language
-@section Which Languages to Use
-@cindex programming languages
-
-When you want to use a language that gets compiled and runs at high
-speed, the best language to use is C.  Using another language is like
-using a non-standard feature: it will cause trouble for users.  Even if
-GCC supports the other language, users may find it inconvenient to have
-to install the compiler for that other language in order to build your
-program.  For example, if you write your program in C++, people will
-have to install the GNU C++ compiler in order to compile your program.
-
-C has one other advantage over C++ and other compiled languages: more
-people know C, so more people will find it easy to read and modify the
-program if it is written in C.
-
-So in general it is much better to use C, rather than the
-comparable alternatives.
-
-But there are two exceptions to that conclusion:
-
-@itemize @bullet
-@item
-It is no problem to use another language to write a tool specifically
-intended for use with that language.  That is because the only people
-who want to build the tool will be those who have installed the other
-language anyway.
-
-@item
-If an application is of interest only to a narrow part of the community,
-then the question of which language it is written in has less effect on
-other people, so you may as well please yourself.
-@end itemize
-
-Many programs are designed to be extensible: they include an interpreter
-for a language that is higher level than C.  Often much of the program
-is written in that language, too.  The Emacs editor pioneered this
-technique.
-
-@cindex GUILE
-The standard extensibility interpreter for GNU software is GUILE
-(@uref{http://www.gnu.org/software/guile/}), which implements the
-language Scheme (an especially clean and simple dialect of Lisp).  We
-don't reject programs written in other ``scripting languages'' such as
-Perl and Python, but using GUILE is very important for the overall
-consistency of the GNU system.
-
-@node Compatibility
-@section Compatibility with Other Implementations
-@cindex compatibility with C and @sc{posix} standards
-@cindex @sc{posix} compatibility
-
-With occasional exceptions, utility programs and libraries for GNU
-should be upward compatible with those in Berkeley Unix, and upward
-compatible with Standard C if Standard C specifies their
-behavior, and upward compatible with @sc{posix} if @sc{posix} specifies
-their behavior.
-
-When these standards conflict, it is useful to offer compatibility
-modes for each of them.
-
-@cindex options for compatibility
-Standard C and @sc{posix} prohibit many kinds of extensions.  Feel
-free to make the extensions anyway, and include a @samp{--ansi},
-@samp{--posix}, or @samp{--compatible} option to turn them off.
-However, if the extension has a significant chance of breaking any real
-programs or scripts, then it is not really upward compatible.  So you
-should try to redesign its interface to make it upward compatible.
-
-@cindex @code{POSIXLY_CORRECT}, environment variable
-Many GNU programs suppress extensions that conflict with @sc{posix} if the
-environment variable @code{POSIXLY_CORRECT} is defined (even if it is
-defined with a null value).  Please make your program recognize this
-variable if appropriate.
-
-When a feature is used only by users (not by programs or command
-files), and it is done poorly in Unix, feel free to replace it
-completely with something totally different and better.  (For example,
-@code{vi} is replaced with Emacs.)  But it is nice to offer a compatible
-feature as well.  (There is a free @code{vi} clone, so we offer it.)
-
-Additional useful features are welcome regardless of whether
-there is any precedent for them.
-
-@node Using Extensions
-@section Using Non-standard Features
-@cindex non-standard extensions
-
-Many GNU facilities that already exist support a number of convenient
-extensions over the comparable Unix facilities.  Whether to use these
-extensions in implementing your program is a difficult question.
-
-On the one hand, using the extensions can make a cleaner program.
-On the other hand, people will not be able to build the program
-unless the other GNU tools are available.  This might cause the
-program to work on fewer kinds of machines.
-
-With some extensions, it might be easy to provide both alternatives.
-For example, you can define functions with a ``keyword'' @code{INLINE}
-and define that as a macro to expand into either @code{inline} or
-nothing, depending on the compiler.
-
-In general, perhaps it is best not to use the extensions if you can
-straightforwardly do without them, but to use the extensions if they
-are a big improvement.
-
-An exception to this rule are the large, established programs (such as
-Emacs) which run on a great variety of systems.  Using GNU extensions in
-such programs would make many users unhappy, so we don't do that.
-
-Another exception is for programs that are used as part of compilation:
-anything that must be compiled with other compilers in order to
-bootstrap the GNU compilation facilities.  If these require the GNU
-compiler, then no one can compile them without having them installed
-already.  That would be extremely troublesome in certain cases.
-
-@node Standard C
-@section Standard C and Pre-Standard C
-@cindex @sc{ansi} C standard
-
-1989 Standard C is widespread enough now that it is ok to use its
-features in new programs.  There is one exception: do not ever use the
-``trigraph'' feature of Standard C.
-
-1999 Standard C is not widespread yet, so please do not require its
-features in programs.  It is ok to use its features if they are present.
-
-However, it is easy to support pre-standard compilers in most programs,
-so if you know how to do that, feel free.  If a program you are
-maintaining has such support, you should try to keep it working.
-
-@cindex function prototypes
-To support pre-standard C, instead of writing function definitions in
-standard prototype form,
-
-@example
-int
-foo (int x, int y)
-@dots{}
-@end example
-
-@noindent
-write the definition in pre-standard style like this,
-
-@example
-int
-foo (x, y)
-     int x, y;
-@dots{}
-@end example
-
-@noindent
-and use a separate declaration to specify the argument prototype:
-
-@example
-int foo (int, int);
-@end example
-
-You need such a declaration anyway, in a header file, to get the benefit
-of prototypes in all the files where the function is called.  And once
-you have the declaration, you normally lose nothing by writing the
-function definition in the pre-standard style.
-
-This technique does not work for integer types narrower than @code{int}.
-If you think of an argument as being of a type narrower than @code{int},
-declare it as @code{int} instead.
-
-There are a few special cases where this technique is hard to use.  For
-example, if a function argument needs to hold the system type
-@code{dev_t}, you run into trouble, because @code{dev_t} is shorter than
-@code{int} on some machines; but you cannot use @code{int} instead,
-because @code{dev_t} is wider than @code{int} on some machines.  There
-is no type you can safely use on all machines in a non-standard
-definition.  The only way to support non-standard C and pass such an
-argument is to check the width of @code{dev_t} using Autoconf and choose
-the argument type accordingly.  This may not be worth the trouble.
-
-In order to support pre-standard compilers that do not recognize
-prototypes, you may want to use a preprocessor macro like this:
-
-@example
-/* Declare the prototype for a general external function.  */
-#if defined (__STDC__) || defined (WINDOWSNT)
-#define P_(proto) proto
-#else
-#define P_(proto) ()
-#endif
-@end example
-
-@node Conditional Compilation
-@section Conditional Compilation
-
-When supporting configuration options already known when building your
-program we prefer using @code{if (... )} over conditional compilation,
-as in the former case the compiler is able to perform more extensive
-checking of all possible code paths.
-
-For example, please write
-
-@smallexample
-  if (HAS_FOO)
-    ...
-  else
-    ...
-@end smallexample
-
-@noindent
-instead of:
-
-@smallexample
-  #ifdef HAS_FOO
-    ...
-  #else
-    ...
-  #endif
-@end smallexample
-
-A modern compiler such as GCC will generate exactly the same code in
-both cases, and we have been using similar techniques with good success
-in several projects.  Of course, the former method assumes that
-@code{HAS_FOO} is defined as either 0 or 1.
-
-While this is not a silver bullet solving all portability problems,
-and is not always appropriate, following this policy would have saved
-GCC developers many hours, or even days, per year.
-
-In the case of function-like macros like @code{REVERSIBLE_CC_MODE} in
-GCC which cannot be simply used in @code{if( ...)} statements, there is
-an easy workaround.  Simply introduce another macro
-@code{HAS_REVERSIBLE_CC_MODE} as in the following example:
-
-@smallexample
-  #ifdef REVERSIBLE_CC_MODE
-  #define HAS_REVERSIBLE_CC_MODE 1
-  #else
-  #define HAS_REVERSIBLE_CC_MODE 0
-  #endif
-@end smallexample
-
-@node Program Behavior
-@chapter Program Behavior for All Programs
-
-This chapter describes conventions for writing robust
-software.  It also describes general standards for error messages, the
-command line interface, and how libraries should behave.
-
-@menu
-* Non-GNU Standards::           We consider standards such as POSIX;
-                                  we don't "obey" them.
-* Semantics::                   Writing robust programs.
-* Libraries::                   Library behavior.
-* Errors::                      Formatting error messages.
-* User Interfaces::             Standards about interfaces generally.
-* Graphical Interfaces::        Standards for graphical interfaces.
-* Command-Line Interfaces::     Standards for command line interfaces.
-* Option Table::                Table of long options.
-* Memory Usage::                When and how to care about memory needs.
-* File Usage::                  Which files to use, and where.
-@end menu
-
-@node Non-GNU Standards
-@section Non-GNU Standards
-
-The GNU Project regards standards published by other organizations as
-suggestions, not orders.  We consider those standards, but we do not
-``obey'' them.  In developing a GNU program, you should implement
-an outside standard's specifications when that makes the GNU system
-better overall in an objective sense.  When it doesn't, you shouldn't.
-
-In most cases, following published standards is convenient for
-users---it means that their programs or scripts will work more
-portably.  For instance, GCC implements nearly all the features of
-Standard C as specified by that standard.  C program developers would
-be unhappy if it did not.  And GNU utilities mostly follow
-specifications of POSIX.2; shell script writers and users would be
-unhappy if our programs were incompatible.
-
-But we do not follow either of these specifications rigidly, and there
-are specific points on which we decided not to follow them, so as to
-make the GNU system better for users.
-
-For instance, Standard C says that nearly all extensions to C are
-prohibited.  How silly!  GCC implements many extensions, some of which
-were later adopted as part of the standard.  If you want these
-constructs to give an error message as ``required'' by the standard,
-you must specify @samp{--pedantic}, which was implemented only so that
-we can say ``GCC is a 100% implementation of the standard,'' not
-because there is any reason to actually use it.
-
-POSIX.2 specifies that @samp{df} and @samp{du} must output sizes by
-default in units of 512 bytes.  What users want is units of 1k, so
-that is what we do by default.  If you want the ridiculous behavior
-``required'' by POSIX, you must set the environment variable
-@samp{POSIXLY_CORRECT} (which was originally going to be named
-@samp{POSIX_ME_HARDER}).
-
-GNU utilities also depart from the letter of the POSIX.2 specification
-when they support long-named command-line options, and intermixing
-options with ordinary arguments.  This minor incompatibility with
-POSIX is never a problem in practice, and it is very useful.
-
-In particular, don't reject a new feature, or remove an old one,
-merely because a standard says it is ``forbidden'' or ``deprecated.''
-
-@node Semantics
-@section Writing Robust Programs
-
-@cindex arbitrary limits on data
-Avoid arbitrary limits on the length or number of @emph{any} data
-structure, including file names, lines, files, and symbols, by allocating
-all data structures dynamically.  In most Unix utilities, ``long lines
-are silently truncated''.  This is not acceptable in a GNU utility.
-
-@cindex @code{NUL} characters
-Utilities reading files should not drop NUL characters, or any other
-nonprinting characters @emph{including those with codes above 0177}.
-The only sensible exceptions would be utilities specifically intended
-for interface to certain types of terminals or printers
-that can't handle those characters.
-Whenever possible, try to make programs work properly with
-sequences of bytes that represent multibyte characters, using encodings
-such as UTF-8 and others.
-
-@cindex error messages
-Check every system call for an error return, unless you know you wish to
-ignore errors.  Include the system error text (from @code{perror} or
-equivalent) in @emph{every} error message resulting from a failing
-system call, as well as the name of the file if any and the name of the
-utility.  Just ``cannot open foo.c'' or ``stat failed'' is not
-sufficient.
-
-@cindex @code{malloc} return value
-@cindex memory allocation failure
-Check every call to @code{malloc} or @code{realloc} to see if it
-returned zero.  Check @code{realloc} even if you are making the block
-smaller; in a system that rounds block sizes to a power of 2,
-@code{realloc} may get a different block if you ask for less space.
-
-In Unix, @code{realloc} can destroy the storage block if it returns
-zero.  GNU @code{realloc} does not have this bug: if it fails, the
-original block is unchanged.  Feel free to assume the bug is fixed.  If
-you wish to run your program on Unix, and wish to avoid lossage in this
-case, you can use the GNU @code{malloc}.
-
-You must expect @code{free} to alter the contents of the block that was
-freed.  Anything you want to fetch from the block, you must fetch before
-calling @code{free}.
-
-If @code{malloc} fails in a noninteractive program, make that a fatal
-error.  In an interactive program (one that reads commands from the
-user), it is better to abort the command and return to the command
-reader loop.  This allows the user to kill other processes to free up
-virtual memory, and then try the command again.
-
-@cindex command-line arguments, decoding
-Use @code{getopt_long} to decode arguments, unless the argument syntax
-makes this unreasonable.
-
-When static storage is to be written in during program execution, use
-explicit C code to initialize it.  Reserve C initialized declarations
-for data that will not be changed.
-@c ADR: why?
-
-Try to avoid low-level interfaces to obscure Unix data structures (such
-as file directories, utmp, or the layout of kernel memory), since these
-are less likely to work compatibly.  If you need to find all the files
-in a directory, use @code{readdir} or some other high-level interface.
-These are supported compatibly by GNU.
-
-@cindex signal handling
-The preferred signal handling facilities are the BSD variant of
-@code{signal}, and the @sc{posix} @code{sigaction} function; the
-alternative USG @code{signal} interface is an inferior design.
-
-Nowadays, using the @sc{posix} signal functions may be the easiest way
-to make a program portable.  If you use @code{signal}, then on GNU/Linux
-systems running GNU libc version 1, you should include
-@file{bsd/signal.h} instead of @file{signal.h}, so as to get BSD
-behavior.  It is up to you whether to support systems where
-@code{signal} has only the USG behavior, or give up on them.
-
-@cindex impossible conditions
-In error checks that detect ``impossible'' conditions, just abort.
-There is usually no point in printing any message.  These checks
-indicate the existence of bugs.  Whoever wants to fix the bugs will have
-to read the source code and run a debugger.  So explain the problem with
-comments in the source.  The relevant data will be in variables, which
-are easy to examine with the debugger, so there is no point moving them
-elsewhere.
-
-Do not use a count of errors as the exit status for a program.
-@emph{That does not work}, because exit status values are limited to 8
-bits (0 through 255).  A single run of the program might have 256
-errors; if you try to return 256 as the exit status, the parent process
-will see 0 as the status, and it will appear that the program succeeded.
-
-@cindex temporary files
-@cindex @code{TMPDIR} environment variable
-If you make temporary files, check the @code{TMPDIR} environment
-variable; if that variable is defined, use the specified directory
-instead of @file{/tmp}.
-
-In addition, be aware that there is a possible security problem when
-creating temporary files in world-writable directories.  In C, you can
-avoid this problem by creating temporary files in this manner:
-
-@example
-fd = open(filename, O_WRONLY | O_CREAT | O_EXCL, 0600);
-@end example
-
-@noindent
-or by using the @code{mkstemps} function from libiberty.
-
-In bash, use @code{set -C} to avoid this problem.
-
-@node Libraries
-@section Library Behavior
-@cindex libraries
-
-Try to make library functions reentrant.  If they need to do dynamic
-storage allocation, at least try to avoid any nonreentrancy aside from
-that of @code{malloc} itself.
-
-Here are certain name conventions for libraries, to avoid name
-conflicts.
-
-Choose a name prefix for the library, more than two characters long.
-All external function and variable names should start with this
-prefix.  In addition, there should only be one of these in any given
-library member.  This usually means putting each one in a separate
-source file.
-
-An exception can be made when two external symbols are always used
-together, so that no reasonable program could use one without the
-other; then they can both go in the same file.
-
-External symbols that are not documented entry points for the user
-should have names beginning with @samp{_}.  The @samp{_} should be
-followed by the chosen name prefix for the library, to prevent
-collisions with other libraries.  These can go in the same files with
-user entry points if you like.
-
-Static functions and variables can be used as you like and need not
-fit any naming convention.
-
-@node Errors
-@section Formatting Error Messages
-@cindex formatting error messages
-@cindex error messages, formatting
-
-Error messages from compilers should look like this:
-
-@example
-@var{source-file-name}:@var{lineno}: @var{message}
-@end example
-
-@noindent
-If you want to mention the column number, use one of these formats:
-
-@example
-@var{source-file-name}:@var{lineno}:@var{column}: @var{message}
-@var{source-file-name}:@var{lineno}.@var{column}: @var{message}
-
-@end example
-
-@noindent
-Line numbers should start from 1 at the beginning of the file, and
-column numbers should start from 1 at the beginning of the line.  (Both
-of these conventions are chosen for compatibility.)  Calculate column
-numbers assuming that space and all ASCII printing characters have
-equal width, and assuming tab stops every 8 columns.
-
-The error message can also give both the starting and ending positions
-of the erroneous text.  There are several formats so that you can
-avoid redundant information such as a duplicate line number.
-Here are the possible formats:
-
-@example
-@var{source-file-name}:@var{lineno-1}.@var{column-1}-@var{lineno-2}.@var{column-2}: @var{message}
-@var{source-file-name}:@var{lineno-1}.@var{column-1}-@var{column-2}: @var{message}
-@var{source-file-name}:@var{lineno-1}-@var{lineno-2}: @var{message}
-@end example
-
-@noindent
-When an error is spread over several files, you can use this format:
-
-@example
-@var{file-1}:@var{lineno-1}.@var{column-1}-@var{file-2}:@var{lineno-2}.@var{column-2}: @var{message}
-@end example
-
-Error messages from other noninteractive programs should look like this:
-
-@example
-@var{program}:@var{source-file-name}:@var{lineno}: @var{message}
-@end example
-
-@noindent
-when there is an appropriate source file, or like this:
-
-@example
-@var{program}: @var{message}
-@end example
-
-@noindent
-when there is no relevant source file.
-
-If you want to mention the column number, use this format:
-
-@example
-@var{program}:@var{source-file-name}:@var{lineno}:@var{column}: @var{message}
-@end example
-
-In an interactive program (one that is reading commands from a
-terminal), it is better not to include the program name in an error
-message.  The place to indicate which program is running is in the
-prompt or with the screen layout.  (When the same program runs with
-input from a source other than a terminal, it is not interactive and
-would do best to print error messages using the noninteractive style.)
-
-The string @var{message} should not begin with a capital letter when
-it follows a program name and/or file name, because that isn't the
-beginning of a sentence.  (The sentence conceptually starts at the
-beginning of the line.)  Also, it should not end with a period.
-
-Error messages from interactive programs, and other messages such as
-usage messages, should start with a capital letter.  But they should not
-end with a period.
-
-@node User Interfaces
-@section Standards for Interfaces Generally
-
-@cindex program name and its behavior
-@cindex behavior, dependent on program's name
-Please don't make the behavior of a utility depend on the name used
-to invoke it.  It is useful sometimes to make a link to a utility
-with a different name, and that should not change what it does.
-
-Instead, use a run time option or a compilation switch or both
-to select among the alternate behaviors.
-
-@cindex output device and program's behavior
-Likewise, please don't make the behavior of the program depend on the
-type of output device it is used with.  Device independence is an
-important principle of the system's design; do not compromise it merely
-to save someone from typing an option now and then.  (Variation in error
-message syntax when using a terminal is ok, because that is a side issue
-that people do not depend on.)
-
-If you think one behavior is most useful when the output is to a
-terminal, and another is most useful when the output is a file or a
-pipe, then it is usually best to make the default behavior the one that
-is useful with output to a terminal, and have an option for the other
-behavior.
-
-Compatibility requires certain programs to depend on the type of output
-device.  It would be disastrous if @code{ls} or @code{sh} did not do so
-in the way all users expect.  In some of these cases, we supplement the
-program with a preferred alternate version that does not depend on the
-output device type.  For example, we provide a @code{dir} program much
-like @code{ls} except that its default output format is always
-multi-column format.
-
-
-@node Graphical Interfaces
-@section Standards for Graphical Interfaces
-@cindex graphical user interface
-
-@cindex gtk+
-When you write a program that provides a graphical user interface,
-please make it work with X Windows and the GTK+ toolkit unless the
-functionality specifically requires some alternative (for example,
-``displaying jpeg images while in console mode'').
-
-In addition, please provide a command-line interface to control the
-functionality.  (In many cases, the graphical user interface can be a
-separate program which invokes the command-line program.)  This is
-so that the same jobs can be done from scripts.
-
-@cindex corba
-@cindex gnome
-Please also consider providing a CORBA interface (for use from GNOME), a
-library interface (for use from C), and perhaps a keyboard-driven
-console interface (for use by users from console mode).  Once you are
-doing the work to provide the functionality and the graphical interface,
-these won't be much extra work.
-
-
-@node Command-Line Interfaces
-@section Standards for Command Line Interfaces
-@cindex command-line interface
-
-@findex getopt
-It is a good idea to follow the @sc{posix} guidelines for the
-command-line options of a program.  The easiest way to do this is to use
-@code{getopt} to parse them.  Note that the GNU version of @code{getopt}
-will normally permit options anywhere among the arguments unless the
-special argument @samp{--} is used.  This is not what @sc{posix}
-specifies; it is a GNU extension.
-
-@cindex long-named options
-Please define long-named options that are equivalent to the
-single-letter Unix-style options.  We hope to make GNU more user
-friendly this way.  This is easy to do with the GNU function
-@code{getopt_long}.
-
-One of the advantages of long-named options is that they can be
-consistent from program to program.  For example, users should be able
-to expect the ``verbose'' option of any GNU program which has one, to be
-spelled precisely @samp{--verbose}.  To achieve this uniformity, look at
-the table of common long-option names when you choose the option names
-for your program (@pxref{Option Table}).
-
-It is usually a good idea for file names given as ordinary arguments to
-be input files only; any output files would be specified using options
-(preferably @samp{-o} or @samp{--output}).  Even if you allow an output
-file name as an ordinary argument for compatibility, try to provide an
-option as another way to specify it.  This will lead to more consistency
-among GNU utilities, and fewer idiosyncrasies for users to remember.
-
-@cindex standard command-line options
-@cindex options, standard command-line
-@cindex CGI programs, standard options for
-@cindex PATH_INFO, specifying standard options as
-All programs should support two standard options: @samp{--version}
-and @samp{--help}.  CGI programs should accept these as command-line
-options, and also if given as the @env{PATH_INFO}; for instance,
-visiting @url{http://example.org/p.cgi/--help} in a browser should
-output the same information as invoking @samp{p.cgi --help} from the
-command line.
-
-@menu
-* --version::       The standard output for --version.
-* --help::          The standard output for --help.
-@end menu
-
-@node --version
-@subsection @option{--version}
-
-@cindex @samp{--version} output
-
-The standard @code{--version} option should direct the program to
-print information about its name, version, origin and legal status,
-all on standard output, and then exit successfully.  Other options and
-arguments should be ignored once this is seen, and the program should
-not perform its normal function.
-
-@cindex canonical name of a program
-@cindex program's canonical name
-The first line is meant to be easy for a program to parse; the version
-number proper starts after the last space.  In addition, it contains
-the canonical name for this program, in this format:
-
-@example
-GNU Emacs 19.30
-@end example
-
-@noindent
-The program's name should be a constant string; @emph{don't} compute it
-from @code{argv[0]}.  The idea is to state the standard or canonical
-name for the program, not its file name.  There are other ways to find
-out the precise file name where a command is found in @code{PATH}.
-
-If the program is a subsidiary part of a larger package, mention the
-package name in parentheses, like this:
-
-@example
-emacsserver (GNU Emacs) 19.30
-@end example
-
-@noindent
-If the package has a version number which is different from this
-program's version number, you can mention the package version number
-just before the close-parenthesis.
-
-If you @emph{need} to mention the version numbers of libraries which
-are distributed separately from the package which contains this program,
-you can do so by printing an additional line of version info for each
-library you want to mention.  Use the same format for these lines as for
-the first line.
-
-Please do not mention all of the libraries that the program uses ``just
-for completeness''---that would produce a lot of unhelpful clutter.
-Please mention library version numbers only if you find in practice that
-they are very important to you in debugging.
-
-The following line, after the version number line or lines, should be a
-copyright notice.  If more than one copyright notice is called for, put
-each on a separate line.
-
-Next should follow a line stating the license, preferably using one of
-abbrevations below, and a brief statement that the program is free
-software, and that users are free to copy and change it.  Also mention
-that there is no warranty, to the extent permitted by law.  See
-recommended wording below.
-
-It is ok to finish the output with a list of the major authors of the
-program, as a way of giving credit.
-
-Here's an example of output that follows these rules:
-
-@smallexample
-GNU hello 2.3
-Copyright (C) 2007 Free Software Foundation, Inc.
-License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
-This is free software: you are free to change and redistribute it.
-There is NO WARRANTY, to the extent permitted by law.
-@end smallexample
-
-You should adapt this to your program, of course, filling in the proper
-year, copyright holder, name of program, and the references to
-distribution terms, and changing the rest of the wording as necessary.
-
-This copyright notice only needs to mention the most recent year in
-which changes were made---there's no need to list the years for previous
-versions' changes.  You don't have to mention the name of the program in
-these notices, if that is inconvenient, since it appeared in the first
-line.  (The rules are different for copyright notices in source files;
-@pxref{Copyright Notices,,,maintain,Information for GNU Maintainers}.)
-
-Translations of the above lines must preserve the validity of the
-copyright notices (@pxref{Internationalization}).  If the translation's
-character set supports it, the @samp{(C)} should be replaced with the
-copyright symbol, as follows:
-
-@ifinfo
-(the official copyright symbol, which is the letter C in a circle);
-@end ifinfo
-@ifnotinfo
-@copyright{}
-@end ifnotinfo
-
-Write the word ``Copyright'' exactly like that, in English.  Do not
-translate it into another language.  International treaties recognize
-the English word ``Copyright''; translations into other languages do not
-have legal significance.
-
-Finally, here is the table of our suggested license abbreviations.
-Any abbreviation can be followed by @samp{v@var{version}[+]}, meaning
-that particular version, or later versions with the @samp{+}, as shown
-above.
-
-In the case of exceptions for extra permissions with the GPL, we use
-@samp{/} for a separator; the version number can follow the license
-abbreviation as usual, as in the examples below.
-
-@table @asis
-@item GPL
-GNU General Public License, @url{http://www.gnu.org/licenses/gpl.html}.
-
-@item LGPL
-GNU Lesser General Public License, @url{http://www.gnu.org/licenses/lgpl.html}.
-
-@item GPL/Guile
-GNU GPL with the exception for Guile; for example, GPLv3+/Guile means
-the GNU GPL version 3 or later, with the extra exception for Guile.
-
-GNU GPL with the exception for Ada.
-
-@item Apache
-The Apache Software Foundation license,
-@url{http://www.apache.org/licenses}.
-
-@item Artistic
-The Artistic license used for Perl, @url{http://www.perlfoundation.org/legal}.
-
-@item Expat
-The Expat license, @url{http://www.jclark.com/xml/copying.txt}.
-
-@item MPL
-The Mozilla Public License, @url{http://www.mozilla.org/MPL/}.
-
-@item OBSD
-The original (4-clause) BSD license, incompatible with the GNU GPL
-@url{http://www.xfree86.org/3.3.6/COPYRIGHT2.html#6}.
-
-@item PHP
-The license used for PHP, @url{http://www.php.net/license/}.
-
-@item public domain
-The non-license that is being in the public domain,
-@url{http://www.gnu.org/licenses/license-list.html#PublicDomain}.
-
-@item Python
-The license for Python, @url{http://www.python.org/2.0.1/license.html}.
-
-@item RBSD
-The revised (3-clause) BSD, compatible with the GNU GPL,
-@url{http://www.xfree86.org/3.3.6/COPYRIGHT2.html#5}.
-
-@item X11
-The simple non-copyleft license used for most versions of the X Window
-system, @url{http://www.xfree86.org/3.3.6/COPYRIGHT2.html#3}.
-
-@item Zlib
-The license for Zlib, @url{http://www.gzip.org/zlib/zlib_license.html}.
-
-@end table
-
-More information about these licenses and many more are on the GNU
-licensing web pages,
-@url{http://www.gnu.org/licenses/license-list.html}.
-
-
-@node --help
-@subsection @option{--help}
-
-@cindex @samp{--help} output
-
-The standard @code{--help} option should output brief documentation
-for how to invoke the program, on standard output, then exit
-successfully.  Other options and arguments should be ignored once this
-is seen, and the program should not perform its normal function.
-
-@cindex address for bug reports
-@cindex bug reports
-Near the end of the @samp{--help} option's output there should be a line
-that says where to mail bug reports.  It should have this format:
-
-@example
-Report bugs to @var{mailing-address}.
-@end example
-
-
-@node Option Table
-@section Table of Long Options
-@cindex long option names
-@cindex table of long options
-
-Here is a table of long options used by GNU programs.  It is surely
-incomplete, but we aim to list all the options that a new program might
-want to be compatible with.  If you use names not already in the table,
-please send @email{bug-standards@@gnu.org} a list of them, with their
-meanings, so we can update the table.
-
-@c Please leave newlines between items in this table; it's much easier
-@c to update when it isn't completely squashed together and unreadable.
-@c When there is more than one short option for a long option name, put
-@c a semicolon between the lists of the programs that use them, not a
-@c period.   --friedman
-
-@table @samp
-@item after-date
-@samp{-N} in @code{tar}.
-
-@item all
-@samp{-a} in @code{du}, @code{ls}, @code{nm}, @code{stty}, @code{uname},
-and @code{unexpand}.
-
-@item all-text
-@samp{-a} in @code{diff}.
-
-@item almost-all
-@samp{-A} in @code{ls}.
-
-@item append
-@samp{-a} in @code{etags}, @code{tee}, @code{time};
-@samp{-r} in @code{tar}.
-
-@item archive
-@samp{-a} in @code{cp}.
-
-@item archive-name
-@samp{-n} in @code{shar}.
-
-@item arglength
-@samp{-l} in @code{m4}.
-
-@item ascii
-@samp{-a} in @code{diff}.
-
-@item assign
-@samp{-v} in @code{gawk}.
-
-@item assume-new
-@samp{-W} in Make.
-
-@item assume-old
-@samp{-o} in Make.
-
-@item auto-check
-@samp{-a} in @code{recode}.
-
-@item auto-pager
-@samp{-a} in @code{wdiff}.
-
-@item auto-reference
-@samp{-A} in @code{ptx}.
-
-@item avoid-wraps
-@samp{-n} in @code{wdiff}.
-
-@item background
-For server programs, run in the background.
-
-@item backward-search
-@samp{-B} in @code{ctags}.
-
-@item basename
-@samp{-f} in @code{shar}.
-
-@item batch
-Used in GDB.
-
-@item baud
-Used in GDB.
-
-@item before
-@samp{-b} in @code{tac}.
-
-@item binary
-@samp{-b} in @code{cpio} and @code{diff}.
-
-@item bits-per-code
-@samp{-b} in @code{shar}.
-
-@item block-size
-Used in @code{cpio} and @code{tar}.
-
-@item blocks
-@samp{-b} in @code{head} and @code{tail}.
-
-@item break-file
-@samp{-b} in @code{ptx}.
-
-@item brief
-Used in various programs to make output shorter.
-
-@item bytes
-@samp{-c} in @code{head}, @code{split}, and @code{tail}.
-
-@item c@t{++}
-@samp{-C} in @code{etags}.
-
-@item catenate
-@samp{-A} in @code{tar}.
-
-@item cd
-Used in various programs to specify the directory to use.
-
-@item changes
-@samp{-c} in @code{chgrp} and @code{chown}.
-
-@item classify
-@samp{-F} in @code{ls}.
-
-@item colons
-@samp{-c} in @code{recode}.
-
-@item command
-@samp{-c} in @code{su};
-@samp{-x} in GDB.
-
-@item compare
-@samp{-d} in @code{tar}.
-
-@item compat
-Used in @code{gawk}.
-
-@item compress
-@samp{-Z} in @code{tar} and @code{shar}.
-
-@item concatenate
-@samp{-A} in @code{tar}.
-
-@item confirmation
-@samp{-w} in @code{tar}.
-
-@item context
-Used in @code{diff}.
-
-@item copyleft
-@samp{-W copyleft} in @code{gawk}.
-
-@item copyright
-@samp{-C} in @code{ptx}, @code{recode}, and @code{wdiff};
-@samp{-W copyright} in @code{gawk}.
-
-@item core
-Used in GDB.
-
-@item count
-@samp{-q} in @code{who}.
-
-@item count-links
-@samp{-l} in @code{du}.
-
-@item create
-Used in @code{tar} and @code{cpio}.
-
-@item cut-mark
-@samp{-c} in @code{shar}.
-
-@item cxref
-@samp{-x} in @code{ctags}.
-
-@item date
-@samp{-d} in @code{touch}.
-
-@item debug
-@samp{-d} in Make and @code{m4};
-@samp{-t} in Bison.
-
-@item define
-@samp{-D} in @code{m4}.
-
-@item defines
-@samp{-d} in Bison and @code{ctags}.
-
-@item delete
-@samp{-D} in @code{tar}.
-
-@item dereference
-@samp{-L} in @code{chgrp}, @code{chown}, @code{cpio}, @code{du},
-@code{ls}, and @code{tar}.
-
-@item dereference-args
-@samp{-D} in @code{du}.
-
-@item device
-Specify an I/O device (special file name).
-
-@item diacritics
-@samp{-d} in @code{recode}.
-
-@item dictionary-order
-@samp{-d} in @code{look}.
-
-@item diff
-@samp{-d} in @code{tar}.
-
-@item digits
-@samp{-n} in @code{csplit}.
-
-@item directory
-Specify the directory to use, in various programs.  In @code{ls}, it
-means to show directories themselves rather than their contents.  In
-@code{rm} and @code{ln}, it means to not treat links to directories
-specially.
-
-@item discard-all
-@samp{-x} in @code{strip}.
-
-@item discard-locals
-@samp{-X} in @code{strip}.
-
-@item dry-run
-@samp{-n} in Make.
-
-@item ed
-@samp{-e} in @code{diff}.
-
-@item elide-empty-files
-@samp{-z} in @code{csplit}.
-
-@item end-delete
-@samp{-x} in @code{wdiff}.
-
-@item end-insert
-@samp{-z} in @code{wdiff}.
-
-@item entire-new-file
-@samp{-N} in @code{diff}.
-
-@item environment-overrides
-@samp{-e} in Make.
-
-@item eof
-@samp{-e} in @code{xargs}.
-
-@item epoch
-Used in GDB.
-
-@item error-limit
-Used in @code{makeinfo}.
-
-@item error-output
-@samp{-o} in @code{m4}.
-
-@item escape
-@samp{-b} in @code{ls}.
-
-@item exclude-from
-@samp{-X} in @code{tar}.
-
-@item exec
-Used in GDB.
-
-@item exit
-@samp{-x} in @code{xargs}.
-
-@item exit-0
-@samp{-e} in @code{unshar}.
-
-@item expand-tabs
-@samp{-t} in @code{diff}.
-
-@item expression
-@samp{-e} in @code{sed}.
-
-@item extern-only
-@samp{-g} in @code{nm}.
-
-@item extract
-@samp{-i} in @code{cpio};
-@samp{-x} in @code{tar}.
-
-@item faces
-@samp{-f} in @code{finger}.
-
-@item fast
-@samp{-f} in @code{su}.
-
-@item fatal-warnings
-@samp{-E} in @code{m4}.
-
-@item file
-@samp{-f} in @code{info}, @code{gawk}, Make, @code{mt}, and @code{tar};
-@samp{-n} in @code{sed};
-@samp{-r} in @code{touch}.
-
-@item field-separator
-@samp{-F} in @code{gawk}.
-
-@item file-prefix
-@samp{-b} in Bison.
-
-@item file-type
-@samp{-F} in @code{ls}.
-
-@item files-from
-@samp{-T} in @code{tar}.
-
-@item fill-column
-Used in @code{makeinfo}.
-
-@item flag-truncation
-@samp{-F} in @code{ptx}.
-
-@item fixed-output-files
-@samp{-y} in Bison.
-
-@item follow
-@samp{-f} in @code{tail}.
-
-@item footnote-style
-Used in @code{makeinfo}.
-
-@item force
-@samp{-f} in @code{cp}, @code{ln}, @code{mv}, and @code{rm}.
-
-@item force-prefix
-@samp{-F} in @code{shar}.
-
-@item foreground
-For server programs, run in the foreground;
-in other words, don't do anything special to run the server
-in the background.
-
-@item format
-Used in @code{ls}, @code{time}, and @code{ptx}.
-
-@item freeze-state
-@samp{-F} in @code{m4}.
-
-@item fullname
-Used in GDB.
-
-@item gap-size
-@samp{-g} in @code{ptx}.
-
-@item get
-@samp{-x} in @code{tar}.
-
-@item graphic
-@samp{-i} in @code{ul}.
-
-@item graphics
-@samp{-g} in @code{recode}.
-
-@item group
-@samp{-g} in @code{install}.
-
-@item gzip
-@samp{-z} in @code{tar} and @code{shar}.
-
-@item hashsize
-@samp{-H} in @code{m4}.
-
-@item header
-@samp{-h} in @code{objdump} and @code{recode}
-
-@item heading
-@samp{-H} in @code{who}.
-
-@item help
-Used to ask for brief usage information.
-
-@item here-delimiter
-@samp{-d} in @code{shar}.
-
-@item hide-control-chars
-@samp{-q} in @code{ls}.
-
-@item html
-In @code{makeinfo}, output HTML.
-
-@item idle
-@samp{-u} in @code{who}.
-
-@item ifdef
-@samp{-D} in @code{diff}.
-
-@item ignore
-@samp{-I} in @code{ls};
-@samp{-x} in @code{recode}.
-
-@item ignore-all-space
-@samp{-w} in @code{diff}.
-
-@item ignore-backups
-@samp{-B} in @code{ls}.
-
-@item ignore-blank-lines
-@samp{-B} in @code{diff}.
-
-@item ignore-case
-@samp{-f} in @code{look} and @code{ptx};
-@samp{-i} in @code{diff} and @code{wdiff}.
-
-@item ignore-errors
-@samp{-i} in Make.
-
-@item ignore-file
-@samp{-i} in @code{ptx}.
-
-@item ignore-indentation
-@samp{-I} in @code{etags}.
-
-@item ignore-init-file
-@samp{-f} in Oleo.
-
-@item ignore-interrupts
-@samp{-i} in @code{tee}.
-
-@item ignore-matching-lines
-@samp{-I} in @code{diff}.
-
-@item ignore-space-change
-@samp{-b} in @code{diff}.
-
-@item ignore-zeros
-@samp{-i} in @code{tar}.
-
-@item include
-@samp{-i} in @code{etags};
-@samp{-I} in @code{m4}.
-
-@item include-dir
-@samp{-I} in Make.
-
-@item incremental
-@samp{-G} in @code{tar}.
-
-@item info
-@samp{-i}, @samp{-l}, and @samp{-m} in Finger.
-
-@item init-file
-In some programs, specify the name of the file to read as the user's
-init file.
-
-@item initial
-@samp{-i} in @code{expand}.
-
-@item initial-tab
-@samp{-T} in @code{diff}.
-
-@item inode
-@samp{-i} in @code{ls}.
-
-@item interactive
-@samp{-i} in @code{cp}, @code{ln}, @code{mv}, @code{rm};
-@samp{-e} in @code{m4};
-@samp{-p} in @code{xargs};
-@samp{-w} in @code{tar}.
-
-@item intermix-type
-@samp{-p} in @code{shar}.
-
-@item iso-8601
-Used in @code{date}
-
-@item jobs
-@samp{-j} in Make.
-
-@item just-print
-@samp{-n} in Make.
-
-@item keep-going
-@samp{-k} in Make.
-
-@item keep-files
-@samp{-k} in @code{csplit}.
-
-@item kilobytes
-@samp{-k} in @code{du} and @code{ls}.
-
-@item language
-@samp{-l} in @code{etags}.
-
-@item less-mode
-@samp{-l} in @code{wdiff}.
-
-@item level-for-gzip
-@samp{-g} in @code{shar}.
-
-@item line-bytes
-@samp{-C} in @code{split}.
-
-@item lines
-Used in @code{split}, @code{head}, and @code{tail}.
-
-@item link
-@samp{-l} in @code{cpio}.
-
-@item lint
-@itemx lint-old
-Used in @code{gawk}.
-
-@item list
-@samp{-t} in @code{cpio};
-@samp{-l} in @code{recode}.
-
-@item list
-@samp{-t} in @code{tar}.
-
-@item literal
-@samp{-N} in @code{ls}.
-
-@item load-average
-@samp{-l} in Make.
-
-@item login
-Used in @code{su}.
-
-@item machine
-Used in @code{uname}.
-
-@item macro-name
-@samp{-M} in @code{ptx}.
-
-@item mail
-@samp{-m} in @code{hello} and @code{uname}.
-
-@item make-directories
-@samp{-d} in @code{cpio}.
-
-@item makefile
-@samp{-f} in Make.
-
-@item mapped
-Used in GDB.
-
-@item max-args
-@samp{-n} in @code{xargs}.
-
-@item max-chars
-@samp{-n} in @code{xargs}.
-
-@item max-lines
-@samp{-l} in @code{xargs}.
-
-@item max-load
-@samp{-l} in Make.
-
-@item max-procs
-@samp{-P} in @code{xargs}.
-
-@item mesg
-@samp{-T} in @code{who}.
-
-@item message
-@samp{-T} in @code{who}.
-
-@item minimal
-@samp{-d} in @code{diff}.
-
-@item mixed-uuencode
-@samp{-M} in @code{shar}.
-
-@item mode
-@samp{-m} in @code{install}, @code{mkdir}, and @code{mkfifo}.
-
-@item modification-time
-@samp{-m} in @code{tar}.
-
-@item multi-volume
-@samp{-M} in @code{tar}.
-
-@item name-prefix
-@samp{-a} in Bison.
-
-@item nesting-limit
-@samp{-L} in @code{m4}.
-
-@item net-headers
-@samp{-a} in @code{shar}.
-
-@item new-file
-@samp{-W} in Make.
-
-@item no-builtin-rules
-@samp{-r} in Make.
-
-@item no-character-count
-@samp{-w} in @code{shar}.
-
-@item no-check-existing
-@samp{-x} in @code{shar}.
-
-@item no-common
-@samp{-3} in @code{wdiff}.
-
-@item no-create
-@samp{-c} in @code{touch}.
-
-@item no-defines
-@samp{-D} in @code{etags}.
-
-@item no-deleted
-@samp{-1} in @code{wdiff}.
-
-@item no-dereference
-@samp{-d} in @code{cp}.
-
-@item no-inserted
-@samp{-2} in @code{wdiff}.
-
-@item no-keep-going
-@samp{-S} in Make.
-
-@item no-lines
-@samp{-l} in Bison.
-
-@item no-piping
-@samp{-P} in @code{shar}.
-
-@item no-prof
-@samp{-e} in @code{gprof}.
-
-@item no-regex
-@samp{-R} in @code{etags}.
-
-@item no-sort
-@samp{-p} in @code{nm}.
-
-@item no-splash
-Don't print a startup splash screen.
-
-@item no-split
-Used in @code{makeinfo}.
-
-@item no-static
-@samp{-a} in @code{gprof}.
-
-@item no-time
-@samp{-E} in @code{gprof}.
-
-@item no-timestamp
-@samp{-m} in @code{shar}.
-
-@item no-validate
-Used in @code{makeinfo}.
-
-@item no-wait
-Used in @code{emacsclient}.
-
-@item no-warn
-Used in various programs to inhibit warnings.
-
-@item node
-@samp{-n} in @code{info}.
-
-@item nodename
-@samp{-n} in @code{uname}.
-
-@item nonmatching
-@samp{-f} in @code{cpio}.
-
-@item nstuff
-@samp{-n} in @code{objdump}.
-
-@item null
-@samp{-0} in @code{xargs}.
-
-@item number
-@samp{-n} in @code{cat}.
-
-@item number-nonblank
-@samp{-b} in @code{cat}.
-
-@item numeric-sort
-@samp{-n} in @code{nm}.
-
-@item numeric-uid-gid
-@samp{-n} in @code{cpio} and @code{ls}.
-
-@item nx
-Used in GDB.
-
-@item old-archive
-@samp{-o} in @code{tar}.
-
-@item old-file
-@samp{-o} in Make.
-
-@item one-file-system
-@samp{-l} in @code{tar}, @code{cp}, and @code{du}.
-
-@item only-file
-@samp{-o} in @code{ptx}.
-
-@item only-prof
-@samp{-f} in @code{gprof}.
-
-@item only-time
-@samp{-F} in @code{gprof}.
-
-@item options
-@samp{-o} in @code{getopt}, @code{fdlist}, @code{fdmount},
-@code{fdmountd}, and @code{fdumount}.
-
-@item output
-In various programs, specify the output file name.
-
-@item output-prefix
-@samp{-o} in @code{shar}.
-
-@item override
-@samp{-o} in @code{rm}.
-
-@item overwrite
-@samp{-c} in @code{unshar}.
-
-@item owner
-@samp{-o} in @code{install}.
-
-@item paginate
-@samp{-l} in @code{diff}.
-
-@item paragraph-indent
-Used in @code{makeinfo}.
-
-@item parents
-@samp{-p} in @code{mkdir} and @code{rmdir}.
-
-@item pass-all
-@samp{-p} in @code{ul}.
-
-@item pass-through
-@samp{-p} in @code{cpio}.
-
-@item port
-@samp{-P} in @code{finger}.
-
-@item portability
-@samp{-c} in @code{cpio} and @code{tar}.
-
-@item posix
-Used in @code{gawk}.
-
-@item prefix-builtins
-@samp{-P} in @code{m4}.
-
-@item prefix
-@samp{-f} in @code{csplit}.
-
-@item preserve
-Used in @code{tar} and @code{cp}.
-
-@item preserve-environment
-@samp{-p} in @code{su}.
-
-@item preserve-modification-time
-@samp{-m} in @code{cpio}.
-
-@item preserve-order
-@samp{-s} in @code{tar}.
-
-@item preserve-permissions
-@samp{-p} in @code{tar}.
-
-@item print
-@samp{-l} in @code{diff}.
-
-@item print-chars
-@samp{-L} in @code{cmp}.
-
-@item print-data-base
-@samp{-p} in Make.
-
-@item print-directory
-@samp{-w} in Make.
-
-@item print-file-name
-@samp{-o} in @code{nm}.
-
-@item print-symdefs
-@samp{-s} in @code{nm}.
-
-@item printer
-@samp{-p} in @code{wdiff}.
-
-@item prompt
-@samp{-p} in @code{ed}.
-
-@item proxy
-Specify an HTTP proxy.
-
-@item query-user
-@samp{-X} in @code{shar}.
-
-@item question
-@samp{-q} in Make.
-
-@item quiet
-Used in many programs to inhibit the usual output.  Every
-program accepting @samp{--quiet} should accept @samp{--silent} as a
-synonym.
-
-@item quiet-unshar
-@samp{-Q} in @code{shar}
-
-@item quote-name
-@samp{-Q} in @code{ls}.
-
-@item rcs
-@samp{-n} in @code{diff}.
-
-@item re-interval
-Used in @code{gawk}.
-
-@item read-full-blocks
-@samp{-B} in @code{tar}.
-
-@item readnow
-Used in GDB.
-
-@item recon
-@samp{-n} in Make.
-
-@item record-number
-@samp{-R} in @code{tar}.
-
-@item recursive
-Used in @code{chgrp}, @code{chown}, @code{cp}, @code{ls}, @code{diff},
-and @code{rm}.
-
-@item reference-limit
-Used in @code{makeinfo}.
-
-@item references
-@samp{-r} in @code{ptx}.
-
-@item regex
-@samp{-r} in @code{tac} and @code{etags}.
-
-@item release
-@samp{-r} in @code{uname}.
-
-@item reload-state
-@samp{-R} in @code{m4}.
-
-@item relocation
-@samp{-r} in @code{objdump}.
-
-@item rename
-@samp{-r} in @code{cpio}.
-
-@item replace
-@samp{-i} in @code{xargs}.
-
-@item report-identical-files
-@samp{-s} in @code{diff}.
-
-@item reset-access-time
-@samp{-a} in @code{cpio}.
-
-@item reverse
-@samp{-r} in @code{ls} and @code{nm}.
-
-@item reversed-ed
-@samp{-f} in @code{diff}.
-
-@item right-side-defs
-@samp{-R} in @code{ptx}.
-
-@item same-order
-@samp{-s} in @code{tar}.
-
-@item same-permissions
-@samp{-p} in @code{tar}.
-
-@item save
-@samp{-g} in @code{stty}.
-
-@item se
-Used in GDB.
-
-@item sentence-regexp
-@samp{-S} in @code{ptx}.
-
-@item separate-dirs
-@samp{-S} in @code{du}.
-
-@item separator
-@samp{-s} in @code{tac}.
-
-@item sequence
-Used by @code{recode} to chose files or pipes for sequencing passes.
-
-@item shell
-@samp{-s} in @code{su}.
-
-@item show-all
-@samp{-A} in @code{cat}.
-
-@item show-c-function
-@samp{-p} in @code{diff}.
-
-@item show-ends
-@samp{-E} in @code{cat}.
-
-@item show-function-line
-@samp{-F} in @code{diff}.
-
-@item show-tabs
-@samp{-T} in @code{cat}.
-
-@item silent
-Used in many programs to inhibit the usual output.
-Every program accepting
-@samp{--silent} should accept @samp{--quiet} as a synonym.
-
-@item size
-@samp{-s} in @code{ls}.
-
-@item socket
-Specify a file descriptor for a network server to use for its socket,
-instead of opening and binding a new socket.  This provides a way to
-run, in a non-privileged process, a server that normally needs a
-reserved port number.
-
-@item sort
-Used in @code{ls}.
-
-@item source
-@samp{-W source} in @code{gawk}.
-
-@item sparse
-@samp{-S} in @code{tar}.
-
-@item speed-large-files
-@samp{-H} in @code{diff}.
-
-@item split-at
-@samp{-E} in @code{unshar}.
-
-@item split-size-limit
-@samp{-L} in @code{shar}.
-
-@item squeeze-blank
-@samp{-s} in @code{cat}.
-
-@item start-delete
-@samp{-w} in @code{wdiff}.
-
-@item start-insert
-@samp{-y} in @code{wdiff}.
-
-@item starting-file
-Used in @code{tar} and @code{diff} to specify which file within
-a directory to start processing with.
-
-@item statistics
-@samp{-s} in @code{wdiff}.
-
-@item stdin-file-list
-@samp{-S} in @code{shar}.
-
-@item stop
-@samp{-S} in Make.
-
-@item strict
-@samp{-s} in @code{recode}.
-
-@item strip
-@samp{-s} in @code{install}.
-
-@item strip-all
-@samp{-s} in @code{strip}.
-
-@item strip-debug
-@samp{-S} in @code{strip}.
-
-@item submitter
-@samp{-s} in @code{shar}.
-
-@item suffix
-@samp{-S} in @code{cp}, @code{ln}, @code{mv}.
-
-@item suffix-format
-@samp{-b} in @code{csplit}.
-
-@item sum
-@samp{-s} in @code{gprof}.
-
-@item summarize
-@samp{-s} in @code{du}.
-
-@item symbolic
-@samp{-s} in @code{ln}.
-
-@item symbols
-Used in GDB and @code{objdump}.
-
-@item synclines
-@samp{-s} in @code{m4}.
-
-@item sysname
-@samp{-s} in @code{uname}.
-
-@item tabs
-@samp{-t} in @code{expand} and @code{unexpand}.
-
-@item tabsize
-@samp{-T} in @code{ls}.
-
-@item terminal
-@samp{-T} in @code{tput} and @code{ul}.
-@samp{-t} in @code{wdiff}.
-
-@item text
-@samp{-a} in @code{diff}.
-
-@item text-files
-@samp{-T} in @code{shar}.
-
-@item time
-Used in @code{ls} and @code{touch}.
-
-@item timeout
-Specify how long to wait before giving up on some operation.
-
-@item to-stdout
-@samp{-O} in @code{tar}.
-
-@item total
-@samp{-c} in @code{du}.
-
-@item touch
-@samp{-t} in Make, @code{ranlib}, and @code{recode}.
-
-@item trace
-@samp{-t} in @code{m4}.
-
-@item traditional
-@samp{-t} in @code{hello};
-@samp{-W traditional} in @code{gawk};
-@samp{-G} in @code{ed}, @code{m4}, and @code{ptx}.
-
-@item tty
-Used in GDB.
-
-@item typedefs
-@samp{-t} in @code{ctags}.
-
-@item typedefs-and-c++
-@samp{-T} in @code{ctags}.
-
-@item typeset-mode
-@samp{-t} in @code{ptx}.
-
-@item uncompress
-@samp{-z} in @code{tar}.
-
-@item unconditional
-@samp{-u} in @code{cpio}.
-
-@item undefine
-@samp{-U} in @code{m4}.
-
-@item undefined-only
-@samp{-u} in @code{nm}.
-
-@item update
-@samp{-u} in @code{cp}, @code{ctags}, @code{mv}, @code{tar}.
-
-@item usage
-Used in @code{gawk}; same as @samp{--help}.
-
-@item uuencode
-@samp{-B} in @code{shar}.
-
-@item vanilla-operation
-@samp{-V} in @code{shar}.
-
-@item verbose
-Print more information about progress.  Many programs support this.
-
-@item verify
-@samp{-W} in @code{tar}.
-
-@item version
-Print the version number.
-
-@item version-control
-@samp{-V} in @code{cp}, @code{ln}, @code{mv}.
-
-@item vgrind
-@samp{-v} in @code{ctags}.
-
-@item volume
-@samp{-V} in @code{tar}.
-
-@item what-if
-@samp{-W} in Make.
-
-@item whole-size-limit
-@samp{-l} in @code{shar}.
-
-@item width
-@samp{-w} in @code{ls} and @code{ptx}.
-
-@item word-regexp
-@samp{-W} in @code{ptx}.
-
-@item writable
-@samp{-T} in @code{who}.
-
-@item zeros
-@samp{-z} in @code{gprof}.
-@end table
-
-@node Memory Usage
-@section Memory Usage
-@cindex memory usage
-
-If a program typically uses just a few meg of memory, don't bother making any
-effort to reduce memory usage.  For example, if it is impractical for
-other reasons to operate on files more than a few meg long, it is
-reasonable to read entire input files into memory to operate on them.
-
-However, for programs such as @code{cat} or @code{tail}, that can
-usefully operate on very large files, it is important to avoid using a
-technique that would artificially limit the size of files it can handle.
-If a program works by lines and could be applied to arbitrary
-user-supplied input files, it should keep only a line in memory, because
-this is not very hard and users will want to be able to operate on input
-files that are bigger than will fit in memory all at once.
-
-If your program creates complicated data structures, just make them in
-memory and give a fatal error if @code{malloc} returns zero.
-
-@node File Usage
-@section File Usage
-@cindex file usage
-
-Programs should be prepared to operate when @file{/usr} and @file{/etc}
-are read-only file systems.  Thus, if the program manages log files,
-lock files, backup files, score files, or any other files which are
-modified for internal purposes, these files should not be stored in
-@file{/usr} or @file{/etc}.
-
-There are two exceptions.  @file{/etc} is used to store system
-configuration information; it is reasonable for a program to modify
-files in @file{/etc} when its job is to update the system configuration.
-Also, if the user explicitly asks to modify one file in a directory, it
-is reasonable for the program to store other files in the same
-directory.
-
-@node Writing C
-@chapter Making The Best Use of C
-
-This chapter provides advice on how best to use the C language
-when writing GNU software.
-
-@menu
-* Formatting::                  Formatting your source code.
-* Comments::                    Commenting your work.
-* Syntactic Conventions::       Clean use of C constructs.
-* Names::                       Naming variables, functions, and files.
-* System Portability::          Portability among different operating systems.
-* CPU Portability::             Supporting the range of CPU types.
-* System Functions::            Portability and ``standard'' library functions.
-* Internationalization::        Techniques for internationalization.
-* Character Set::               Use ASCII by default.
-* Quote Characters::            Use `...' in the C locale.
-* Mmap::                        How you can safely use @code{mmap}.
-@end menu
-
-@node Formatting
-@section Formatting Your Source Code
-@cindex formatting source code
-
-@cindex open brace
-@cindex braces, in C source
-It is important to put the open-brace that starts the body of a C
-function in column one, so that they will start a defun.  Several
-tools look for open-braces in column one to find the beginnings of C
-functions.  These tools will not work on code not formatted that way.
-
-Avoid putting open-brace, open-parenthesis or open-bracket in column
-one when they are inside a function, so that they won't start a defun.
-The open-brace that starts a @code{struct} body can go in column one
-if you find it useful to treat that definition as a defun.
-
-It is also important for function definitions to start the name of the
-function in column one.  This helps people to search for function
-definitions, and may also help certain tools recognize them.  Thus,
-using Standard C syntax, the format is this:
-
-@example
-static char *
-concat (char *s1, char *s2)
-@{
-  @dots{}
-@}
-@end example
-
-@noindent
-or, if you want to use traditional C syntax, format the definition like
-this:
-
-@example
-static char *
-concat (s1, s2)        /* Name starts in column one here */
-     char *s1, *s2;
-@{                     /* Open brace in column one here */
-  @dots{}
-@}
-@end example
-
-In Standard C, if the arguments don't fit nicely on one line,
-split it like this:
-
-@example
-int
-lots_of_args (int an_integer, long a_long, short a_short,
-              double a_double, float a_float)
-@dots{}
-@end example
-
-The rest of this section gives our recommendations for other aspects of
-C formatting style, which is also the default style of the @code{indent}
-program in version 1.2 and newer.  It corresponds to the options
-
-@smallexample
--nbad -bap -nbc -bbo -bl -bli2 -bls -ncdb -nce -cp1 -cs -di2
--ndj -nfc1 -nfca -hnl -i2 -ip5 -lp -pcs -psl -nsc -nsob
-@end smallexample
-
-We don't think of these recommendations as requirements, because it
-causes no problems for users if two different programs have different
-formatting styles.
-
-But whatever style you use, please use it consistently, since a mixture
-of styles within one program tends to look ugly.  If you are
-contributing changes to an existing program, please follow the style of
-that program.
-
-For the body of the function, our recommended style looks like this:
-
-@example
-if (x < foo (y, z))
-  haha = bar[4] + 5;
-else
-  @{
-    while (z)
-      @{
-        haha += foo (z, z);
-        z--;
-      @}
-    return ++x + bar ();
-  @}
-@end example
-
-@cindex spaces before open-paren
-We find it easier to read a program when it has spaces before the
-open-parentheses and after the commas.  Especially after the commas.
-
-When you split an expression into multiple lines, split it
-before an operator, not after one.  Here is the right way:
-
-@cindex expressions, splitting
-@example
-if (foo_this_is_long && bar > win (x, y, z)
-    && remaining_condition)
-@end example
-
-Try to avoid having two operators of different precedence at the same
-level of indentation.  For example, don't write this:
-
-@example
-mode = (inmode[j] == VOIDmode
-        || GET_MODE_SIZE (outmode[j]) > GET_MODE_SIZE (inmode[j])
-        ? outmode[j] : inmode[j]);
-@end example
-
-Instead, use extra parentheses so that the indentation shows the nesting:
-
-@example
-mode = ((inmode[j] == VOIDmode
-         || (GET_MODE_SIZE (outmode[j]) > GET_MODE_SIZE (inmode[j])))
-        ? outmode[j] : inmode[j]);
-@end example
-
-Insert extra parentheses so that Emacs will indent the code properly.
-For example, the following indentation looks nice if you do it by hand,
-
-@example
-v = rup->ru_utime.tv_sec*1000 + rup->ru_utime.tv_usec/1000
-    + rup->ru_stime.tv_sec*1000 + rup->ru_stime.tv_usec/1000;
-@end example
-
-@noindent
-but Emacs would alter it.  Adding a set of parentheses produces
-something that looks equally nice, and which Emacs will preserve:
-
-@example
-v = (rup->ru_utime.tv_sec*1000 + rup->ru_utime.tv_usec/1000
-     + rup->ru_stime.tv_sec*1000 + rup->ru_stime.tv_usec/1000);
-@end example
-
-Format do-while statements like this:
-
-@example
-do
-  @{
-    a = foo (a);
-  @}
-while (a > 0);
-@end example
-
-@cindex formfeed
-@cindex control-L
-Please use formfeed characters (control-L) to divide the program into
-pages at logical places (but not within a function).  It does not matter
-just how long the pages are, since they do not have to fit on a printed
-page.  The formfeeds should appear alone on lines by themselves.
-
-@node Comments
-@section Commenting Your Work
-@cindex commenting
-
-Every program should start with a comment saying briefly what it is for.
-Example: @samp{fmt - filter for simple filling of text}.  This comment
-should be at the top of the source file containing the @samp{main}
-function of the program.
-
-Also, please write a brief comment at the start of each source file,
-with the file name and a line or two about the overall purpose of the
-file.
-
-Please write the comments in a GNU program in English, because English
-is the one language that nearly all programmers in all countries can
-read.  If you do not write English well, please write comments in
-English as well as you can, then ask other people to help rewrite them.
-If you can't write comments in English, please find someone to work with
-you and translate your comments into English.
-
-Please put a comment on each function saying what the function does,
-what sorts of arguments it gets, and what the possible values of
-arguments mean and are used for.  It is not necessary to duplicate in
-words the meaning of the C argument declarations, if a C type is being
-used in its customary fashion.  If there is anything nonstandard about
-its use (such as an argument of type @code{char *} which is really the
-address of the second character of a string, not the first), or any
-possible values that would not work the way one would expect (such as,
-that strings containing newlines are not guaranteed to work), be sure
-to say so.
-
-Also explain the significance of the return value, if there is one.
-
-Please put two spaces after the end of a sentence in your comments, so
-that the Emacs sentence commands will work.  Also, please write
-complete sentences and capitalize the first word.  If a lower-case
-identifier comes at the beginning of a sentence, don't capitalize it!
-Changing the spelling makes it a different identifier.  If you don't
-like starting a sentence with a lower case letter, write the sentence
-differently (e.g., ``The identifier lower-case is @dots{}'').
-
-The comment on a function is much clearer if you use the argument
-names to speak about the argument values.  The variable name itself
-should be lower case, but write it in upper case when you are speaking
-about the value rather than the variable itself.  Thus, ``the inode
-number NODE_NUM'' rather than ``an inode''.
-
-There is usually no purpose in restating the name of the function in
-the comment before it, because the reader can see that for himself.
-There might be an exception when the comment is so long that the function
-itself would be off the bottom of the screen.
-
-There should be a comment on each static variable as well, like this:
-
-@example
-/* Nonzero means truncate lines in the display;
-   zero means continue them.  */
-int truncate_lines;
-@end example
-
-@cindex conditionals, comments for
-@cindex @code{#endif}, commenting
-Every @samp{#endif} should have a comment, except in the case of short
-conditionals (just a few lines) that are not nested.  The comment should
-state the condition of the conditional that is ending, @emph{including
-its sense}.  @samp{#else} should have a comment describing the condition
-@emph{and sense} of the code that follows.  For example:
-
-@example
-@group
-#ifdef foo
-  @dots{}
-#else /* not foo */
-  @dots{}
-#endif /* not foo */
-@end group
-@group
-#ifdef foo
-  @dots{}
-#endif /* foo */
-@end group
-@end example
-
-@noindent
-but, by contrast, write the comments this way for a @samp{#ifndef}:
-
-@example
-@group
-#ifndef foo
-  @dots{}
-#else /* foo */
-  @dots{}
-#endif /* foo */
-@end group
-@group
-#ifndef foo
-  @dots{}
-#endif /* not foo */
-@end group
-@end example
-
-@node Syntactic Conventions
-@section Clean Use of C Constructs
-@cindex syntactic conventions
-
-@cindex implicit @code{int}
-@cindex function argument, declaring
-Please explicitly declare the types of all objects.  For example, you
-should explicitly declare all arguments to functions, and you should
-declare functions to return @code{int} rather than omitting the
-@code{int}.
-
-@cindex compiler warnings
-@cindex @samp{-Wall} compiler option
-Some programmers like to use the GCC @samp{-Wall} option, and change the
-code whenever it issues a warning.  If you want to do this, then do.
-Other programmers prefer not to use @samp{-Wall}, because it gives
-warnings for valid and legitimate code which they do not want to change.
-If you want to do this, then do.  The compiler should be your servant,
-not your master.
-
-Declarations of external functions and functions to appear later in the
-source file should all go in one place near the beginning of the file
-(somewhere before the first function definition in the file), or else
-should go in a header file.  Don't put @code{extern} declarations inside
-functions.
-
-@cindex temporary variables
-It used to be common practice to use the same local variables (with
-names like @code{tem}) over and over for different values within one
-function.  Instead of doing this, it is better to declare a separate local
-variable for each distinct purpose, and give it a name which is
-meaningful.  This not only makes programs easier to understand, it also
-facilitates optimization by good compilers.  You can also move the
-declaration of each local variable into the smallest scope that includes
-all its uses.  This makes the program even cleaner.
-
-Don't use local variables or parameters that shadow global identifiers.
-
-@cindex multiple variables in a line
-Don't declare multiple variables in one declaration that spans lines.
-Start a new declaration on each line, instead.  For example, instead
-of this:
-
-@example
-@group
-int    foo,
-       bar;
-@end group
-@end example
-
-@noindent
-write either this:
-
-@example
-int foo, bar;
-@end example
-
-@noindent
-or this:
-
-@example
-int foo;
-int bar;
-@end example
-
-@noindent
-(If they are global variables, each should have a comment preceding it
-anyway.)
-
-When you have an @code{if}-@code{else} statement nested in another
-@code{if} statement, always put braces around the @code{if}-@code{else}.
-Thus, never write like this:
-
-@example
-if (foo)
-  if (bar)
-    win ();
-  else
-    lose ();
-@end example
-
-@noindent
-always like this:
-
-@example
-if (foo)
-  @{
-    if (bar)
-      win ();
-    else
-      lose ();
-  @}
-@end example
-
-If you have an @code{if} statement nested inside of an @code{else}
-statement, either write @code{else if} on one line, like this,
-
-@example
-if (foo)
-  @dots{}
-else if (bar)
-  @dots{}
-@end example
-
-@noindent
-with its @code{then}-part indented like the preceding @code{then}-part,
-or write the nested @code{if} within braces like this:
-
-@example
-if (foo)
-  @dots{}
-else
-  @{
-    if (bar)
-      @dots{}
-  @}
-@end example
-
-Don't declare both a structure tag and variables or typedefs in the
-same declaration.  Instead, declare the structure tag separately
-and then use it to declare the variables or typedefs.
-
-Try to avoid assignments inside @code{if}-conditions (assignments
-inside @code{while}-conditions are ok).  For example, don't write
-this:
-
-@example
-if ((foo = (char *) malloc (sizeof *foo)) == 0)
-  fatal ("virtual memory exhausted");
-@end example
-
-@noindent
-instead, write this:
-
-@example
-foo = (char *) malloc (sizeof *foo);
-if (foo == 0)
-  fatal ("virtual memory exhausted");
-@end example
-
-@pindex lint
-Don't make the program ugly to placate @code{lint}.  Please don't insert any
-casts to @code{void}.  Zero without a cast is perfectly fine as a null
-pointer constant, except when calling a varargs function.
-
-@node Names
-@section Naming Variables, Functions, and Files
-
-@cindex names of variables, functions, and files
-The names of global variables and functions in a program serve as
-comments of a sort.  So don't choose terse names---instead, look for
-names that give useful information about the meaning of the variable or
-function.  In a GNU program, names should be English, like other
-comments.
-
-Local variable names can be shorter, because they are used only within
-one context, where (presumably) comments explain their purpose.
-
-Try to limit your use of abbreviations in symbol names.  It is ok to
-make a few abbreviations, explain what they mean, and then use them
-frequently, but don't use lots of obscure abbreviations.
-
-Please use underscores to separate words in a name, so that the Emacs
-word commands can be useful within them.  Stick to lower case; reserve
-upper case for macros and @code{enum} constants, and for name-prefixes
-that follow a uniform convention.
-
-For example, you should use names like @code{ignore_space_change_flag};
-don't use names like @code{iCantReadThis}.
-
-Variables that indicate whether command-line options have been
-specified should be named after the meaning of the option, not after
-the option-letter.  A comment should state both the exact meaning of
-the option and its letter.  For example,
-
-@example
-@group
-/* Ignore changes in horizontal whitespace (-b).  */
-int ignore_space_change_flag;
-@end group
-@end example
-
-When you want to define names with constant integer values, use
-@code{enum} rather than @samp{#define}.  GDB knows about enumeration
-constants.
-
-@cindex file-name limitations
-@pindex doschk
-You might want to make sure that none of the file names would conflict
-if the files were loaded onto an MS-DOS file system which shortens the
-names.  You can use the program @code{doschk} to test for this.
-
-Some GNU programs were designed to limit themselves to file names of 14
-characters or less, to avoid file name conflicts if they are read into
-older System V systems.  Please preserve this feature in the existing
-GNU programs that have it, but there is no need to do this in new GNU
-programs.  @code{doschk} also reports file names longer than 14
-characters.
-
-@node System Portability
-@section Portability between System Types
-@cindex portability, between system types
-
-In the Unix world, ``portability'' refers to porting to different Unix
-versions.  For a GNU program, this kind of portability is desirable, but
-not paramount.
-
-The primary purpose of GNU software is to run on top of the GNU kernel,
-compiled with the GNU C compiler, on various types of @sc{cpu}.  So the
-kinds of portability that are absolutely necessary are quite limited.
-But it is important to support Linux-based GNU systems, since they
-are the form of GNU that is popular.
-
-Beyond that, it is good to support the other free operating systems
-(*BSD), and it is nice to support other Unix-like systems if you want
-to.  Supporting a variety of Unix-like systems is desirable, although
-not paramount.  It is usually not too hard, so you may as well do it.
-But you don't have to consider it an obligation, if it does turn out to
-be hard.
-
-@pindex autoconf
-The easiest way to achieve portability to most Unix-like systems is to
-use Autoconf.  It's unlikely that your program needs to know more
-information about the host platform than Autoconf can provide, simply
-because most of the programs that need such knowledge have already been
-written.
-
-Avoid using the format of semi-internal data bases (e.g., directories)
-when there is a higher-level alternative (@code{readdir}).
-
-@cindex non-@sc{posix} systems, and portability
-As for systems that are not like Unix, such as MSDOS, Windows, VMS, MVS,
-and older Macintosh systems, supporting them is often a lot of work.
-When that is the case, it is better to spend your time adding features
-that will be useful on GNU and GNU/Linux, rather than on supporting
-other incompatible systems.
-
-If you do support Windows, please do not abbreviate it as ``win''.  In
-hacker terminology, calling something a ``win'' is a form of praise.
-You're free to praise Microsoft Windows on your own if you want, but
-please don't do this in GNU packages.  Instead of abbreviating
-``Windows'' to ``un'', you can write it in full or abbreviate it to
-``woe'' or ``w''.  In GNU Emacs, for instance, we use @samp{w32} in
-file names of Windows-specific files, but the macro for Windows
-conditionals is called @code{WINDOWSNT}.
-
-It is a good idea to define the ``feature test macro''
-@code{_GNU_SOURCE} when compiling your C files.  When you compile on GNU
-or GNU/Linux, this will enable the declarations of GNU library extension
-functions, and that will usually give you a compiler error message if
-you define the same function names in some other way in your program.
-(You don't have to actually @emph{use} these functions, if you prefer
-to make the program more portable to other systems.)
-
-But whether or not you use these GNU extensions, you should avoid
-using their names for any other meanings.  Doing so would make it hard
-to move your code into other GNU programs.
-
-@node CPU Portability
-@section Portability between @sc{cpu}s
-
-@cindex data types, and portability
-@cindex portability, and data types
-Even GNU systems will differ because of differences among @sc{cpu}
-types---for example, difference in byte ordering and alignment
-requirements.  It is absolutely essential to handle these differences.
-However, don't make any effort to cater to the possibility that an
-@code{int} will be less than 32 bits.  We don't support 16-bit machines
-in GNU.
-
-Similarly, don't make any effort to cater to the possibility that
-@code{long} will be smaller than predefined types like @code{size_t}.
-For example, the following code is ok:
-
-@example
-printf ("size = %lu\n", (unsigned long) sizeof array);
-printf ("diff = %ld\n", (long) (pointer2 - pointer1));
-@end example
-
-1989 Standard C requires this to work, and we know of only one
-counterexample: 64-bit programs on Microsoft Windows.  We will
-leave it to those who want to port GNU programs to that environment
-to figure out how to do it.
-
-Predefined file-size types like @code{off_t} are an exception: they are
-longer than @code{long} on many platforms, so code like the above won't
-work with them.  One way to print an @code{off_t} value portably is to
-print its digits yourself, one by one.
-
-Don't assume that the address of an @code{int} object is also the
-address of its least-significant byte.  This is false on big-endian
-machines.  Thus, don't make the following mistake:
-
-@example
-int c;
-@dots{}
-while ((c = getchar ()) != EOF)
-  write (file_descriptor, &c, 1);
-@end example
-
-@noindent Instead, use @code{unsigned char} as follows.  (The @code{unsigned}
-is for portability to unusual systems where @code{char} is signed and
-where there is integer overflow checking.)
-
-@example
-int c;
-while ((c = getchar ()) != EOF)
-  @{
-    unsigned char u = c;
-    write (file_descriptor, &u, 1);
-  @}
-@end example
-
-It used to be ok to not worry about the difference between pointers
-and integers when passing arguments to functions.  However, on most
-modern 64-bit machines pointers are wider than @code{int}.
-Conversely, integer types like @code{long long int} and @code{off_t}
-are wider than pointers on most modern 32-bit machines.  Hence it's
-often better nowadays to use prototypes to define functions whose
-argument types are not trivial.
-
-In particular, if functions accept varying argument counts or types
-they should be declared using prototypes containing @samp{...} and
-defined using @file{stdarg.h}.  For an example of this, please see the
-@uref{http://www.gnu.org/software/gnulib/, Gnulib} error module, which
-declares and defines the following function:
-
-@example
-/* Print a message with `fprintf (stderr, FORMAT, ...)';
-   if ERRNUM is nonzero, follow it with ": " and strerror (ERRNUM).
-   If STATUS is nonzero, terminate the program with `exit (STATUS)'.  */
-
-void error (int status, int errnum, const char *format, ...);
-@end example
-
-A simple way to use the Gnulib error module is to obtain the two
-source files @file{error.c} and @file{error.h} from the Gnulib library
-source code repository at
-@uref{http://savannah.gnu.org/cgi-bin/viewcvs/gnulib/gnulib/lib/}.
-Here's a sample use:
-
-@example
-#include "error.h"
-#include <errno.h>
-#include <stdio.h>
-
-char *program_name = "myprogram";
-
-FILE *
-xfopen (char const *name)
-@{
-  FILE *fp = fopen (name, "r");
-  if (! fp)
-    error (1, errno, "cannot read %s", name);
-  return fp;
-@}
-@end example
-
-@cindex casting pointers to integers
-Avoid casting pointers to integers if you can.  Such casts greatly
-reduce portability, and in most programs they are easy to avoid.  In the
-cases where casting pointers to integers is essential---such as, a Lisp
-interpreter which stores type information as well as an address in one
-word---you'll have to make explicit provisions to handle different word
-sizes.  You will also need to make provision for systems in which the
-normal range of addresses you can get from @code{malloc} starts far away
-from zero.
-
-@node System Functions
-@section Calling System Functions
-@cindex library functions, and portability
-@cindex portability, and library functions
-
-C implementations differ substantially.  Standard C reduces but does
-not eliminate the incompatibilities; meanwhile, many GNU packages still
-support pre-standard compilers because this is not hard to do.  This
-chapter gives recommendations for how to use the more-or-less standard C
-library functions to avoid unnecessary loss of portability.
-
-@itemize @bullet
-@item
-Don't use the return value of @code{sprintf}.  It returns the number of
-characters written on some systems, but not on all systems.
-
-@item
-Be aware that @code{vfprintf} is not always available.
-
-@item
-@code{main} should be declared to return type @code{int}.  It should
-terminate either by calling @code{exit} or by returning the integer
-status code; make sure it cannot ever return an undefined value.
-
-@cindex declaration for system functions
-@item
-Don't declare system functions explicitly.
-
-Almost any declaration for a system function is wrong on some system.
-To minimize conflicts, leave it to the system header files to declare
-system functions.  If the headers don't declare a function, let it
-remain undeclared.
-
-While it may seem unclean to use a function without declaring it, in
-practice this works fine for most system library functions on the
-systems where this really happens; thus, the disadvantage is only
-theoretical.  By contrast, actual declarations have frequently caused
-actual conflicts.
-
-@item
-If you must declare a system function, don't specify the argument types.
-Use an old-style declaration, not a Standard C prototype.  The more you
-specify about the function, the more likely a conflict.
-
-@item
-In particular, don't unconditionally declare @code{malloc} or
-@code{realloc}.
-
-Most GNU programs use those functions just once, in functions
-conventionally named @code{xmalloc} and @code{xrealloc}.  These
-functions call @code{malloc} and @code{realloc}, respectively, and
-check the results.
-
-Because @code{xmalloc} and @code{xrealloc} are defined in your program,
-you can declare them in other files without any risk of type conflict.
-
-On most systems, @code{int} is the same length as a pointer; thus, the
-calls to @code{malloc} and @code{realloc} work fine.  For the few
-exceptional systems (mostly 64-bit machines), you can use
-@strong{conditionalized} declarations of @code{malloc} and
-@code{realloc}---or put these declarations in configuration files
-specific to those systems.
-
-@cindex string library functions
-@item
-The string functions require special treatment.  Some Unix systems have
-a header file @file{string.h}; others have @file{strings.h}.  Neither
-file name is portable.  There are two things you can do: use Autoconf to
-figure out which file to include, or don't include either file.
-
-@item
-If you don't include either strings file, you can't get declarations for
-the string functions from the header file in the usual way.
-
-That causes less of a problem than you might think.  The newer standard
-string functions should be avoided anyway because many systems still
-don't support them.  The string functions you can use are these:
-
-@example
-strcpy   strncpy   strcat   strncat
-strlen   strcmp    strncmp
-strchr   strrchr
-@end example
-
-The copy and concatenate functions work fine without a declaration as
-long as you don't use their values.  Using their values without a
-declaration fails on systems where the width of a pointer differs from
-the width of @code{int}, and perhaps in other cases.  It is trivial to
-avoid using their values, so do that.
-
-The compare functions and @code{strlen} work fine without a declaration
-on most systems, possibly all the ones that GNU software runs on.
-You may find it necessary to declare them @strong{conditionally} on a
-few systems.
-
-The search functions must be declared to return @code{char *}.  Luckily,
-there is no variation in the data type they return.  But there is
-variation in their names.  Some systems give these functions the names
-@code{index} and @code{rindex}; other systems use the names
-@code{strchr} and @code{strrchr}.  Some systems support both pairs of
-names, but neither pair works on all systems.
-
-You should pick a single pair of names and use it throughout your
-program.  (Nowadays, it is better to choose @code{strchr} and
-@code{strrchr} for new programs, since those are the standard
-names.)  Declare both of those names as functions returning @code{char
-*}.  On systems which don't support those names, define them as macros
-in terms of the other pair.  For example, here is what to put at the
-beginning of your file (or in a header) if you want to use the names
-@code{strchr} and @code{strrchr} throughout:
-
-@example
-#ifndef HAVE_STRCHR
-#define strchr index
-#endif
-#ifndef HAVE_STRRCHR
-#define strrchr rindex
-#endif
-
-char *strchr ();
-char *strrchr ();
-@end example
-@end itemize
-
-Here we assume that @code{HAVE_STRCHR} and @code{HAVE_STRRCHR} are
-macros defined in systems where the corresponding functions exist.
-One way to get them properly defined is to use Autoconf.
-
-@node Internationalization
-@section Internationalization
-@cindex internationalization
-
-@pindex gettext
-GNU has a library called GNU gettext that makes it easy to translate the
-messages in a program into various languages.  You should use this
-library in every program.  Use English for the messages as they appear
-in the program, and let gettext provide the way to translate them into
-other languages.
-
-Using GNU gettext involves putting a call to the @code{gettext} macro
-around each string that might need translation---like this:
-
-@example
-printf (gettext ("Processing file `%s'..."));
-@end example
-
-@noindent
-This permits GNU gettext to replace the string @code{"Processing file
-`%s'..."} with a translated version.
-
-Once a program uses gettext, please make a point of writing calls to
-@code{gettext} when you add new strings that call for translation.
-
-Using GNU gettext in a package involves specifying a @dfn{text domain
-name} for the package.  The text domain name is used to separate the
-translations for this package from the translations for other packages.
-Normally, the text domain name should be the same as the name of the
-package---for example, @samp{coreutils} for the GNU core utilities.
-
-@cindex message text, and internationalization
-To enable gettext to work well, avoid writing code that makes
-assumptions about the structure of words or sentences.  When you want
-the precise text of a sentence to vary depending on the data, use two or
-more alternative string constants each containing a complete sentences,
-rather than inserting conditionalized words or phrases into a single
-sentence framework.
-
-Here is an example of what not to do:
-
-@smallexample
-printf ("%s is full", capacity > 5000000 ? "disk" : "floppy disk");
-@end smallexample
-
-If you apply gettext to all strings, like this,
-
-@smallexample
-printf (gettext ("%s is full"),
-        capacity > 5000000 ? gettext ("disk") : gettext ("floppy disk"));
-@end smallexample
-
-@noindent
-the translator will hardly know that "disk" and "floppy disk" are meant to
-be substituted in the other string.  Worse, in some languages (like French)
-the construction will not work: the translation of the word "full" depends
-on the gender of the first part of the sentence; it happens to be not the
-same for "disk" as for "floppy disk".
-
-Complete sentences can be translated without problems:
-
-@example
-printf (capacity > 5000000 ? gettext ("disk is full")
-        : gettext ("floppy disk is full"));
-@end example
-
-A similar problem appears at the level of sentence structure with this
-code:
-
-@example
-printf ("#  Implicit rule search has%s been done.\n",
-        f->tried_implicit ? "" : " not");
-@end example
-
-@noindent
-Adding @code{gettext} calls to this code cannot give correct results for
-all languages, because negation in some languages requires adding words
-at more than one place in the sentence.  By contrast, adding
-@code{gettext} calls does the job straightforwardly if the code starts
-out like this:
-
-@example
-printf (f->tried_implicit
-        ? "#  Implicit rule search has been done.\n",
-        : "#  Implicit rule search has not been done.\n");
-@end example
-
-Another example is this one:
-
-@example
-printf ("%d file%s processed", nfiles,
-        nfiles != 1 ? "s" : "");
-@end example
-
-@noindent
-The problem with this example is that it assumes that plurals are made
-by adding `s'.  If you apply gettext to the format string, like this,
-
-@example
-printf (gettext ("%d file%s processed"), nfiles,
-        nfiles != 1 ? "s" : "");
-@end example
-
-@noindent
-the message can use different words, but it will still be forced to use
-`s' for the plural.  Here is a better way, with gettext being applied to
-the two strings independently:
-
-@example
-printf ((nfiles != 1 ? gettext ("%d files processed")
-         : gettext ("%d file processed")),
-        nfiles);
-@end example
-
-@noindent
-But this still doesn't work for languages like Polish, which has three
-plural forms: one for nfiles == 1, one for nfiles == 2, 3, 4, 22, 23, 24, ...
-and one for the rest.  The GNU @code{ngettext} function solves this problem:
-
-@example
-printf (ngettext ("%d files processed", "%d file processed", nfiles),
-        nfiles);
-@end example
-
-
-@node Character Set
-@section Character Set
-@cindex character set
-@cindex encodings
-@cindex ASCII characters
-@cindex non-ASCII characters
-
-Sticking to the ASCII character set (plain text, 7-bit characters) is
-preferred in GNU source code comments, text documents, and other
-contexts, unless there is good reason to do something else because of
-the application domain.  For example, if source code deals with the
-French Revolutionary calendar, it is OK if its literal strings contain
-accented characters in month names like ``Flor@'eal''.  Also, it is OK
-to use non-ASCII characters to represent proper names of contributors in
-change logs (@pxref{Change Logs}).
-
-If you need to use non-ASCII characters, you should normally stick with
-one encoding, as one cannot in general mix encodings reliably.
-
-
-@node Quote Characters
-@section Quote Characters
-@cindex quote characters
-@cindex locale-specific quote characters
-@cindex left quote
-@cindex grave accent
-
-In the C locale, GNU programs should stick to plain ASCII for quotation
-characters in messages to users: preferably 0x60 (@samp{`}) for left
-quotes and 0x27 (@samp{'}) for right quotes.  It is ok, but not
-required, to use locale-specific quotes in other locales.
-
-The @uref{http://www.gnu.org/software/gnulib/, Gnulib} @code{quote} and
-@code{quotearg} modules provide a reasonably straightforward way to
-support locale-specific quote characters, as well as taking care of
-other issues, such as quoting a filename that itself contains a quote
-character.  See the Gnulib documentation for usage details.
-
-In any case, the documentation for your program should clearly specify
-how it does quoting, if different than the preferred method of @samp{`}
-and @samp{'}.  This is especially important if the output of your
-program is ever likely to be parsed by another program.
-
-Quotation characters are a difficult area in the computing world at
-this time: there are no true left or right quote characters in Latin1;
-the @samp{`} character we use was standardized there as a grave
-accent.  Moreover, Latin1 is still not universally usable.
-
-Unicode contains the unambiguous quote characters required, and its
-common encoding UTF-8 is upward compatible with Latin1.  However,
-Unicode and UTF-8 are not universally well-supported, either.
-
-This may change over the next few years, and then we will revisit
-this.
-
-
-@node Mmap
-@section Mmap
-@findex mmap
-
-Don't assume that @code{mmap} either works on all files or fails
-for all files.  It may work on some files and fail on others.
-
-The proper way to use @code{mmap} is to try it on the specific file for
-which you want to use it---and if @code{mmap} doesn't work, fall back on
-doing the job in another way using @code{read} and @code{write}.
-
-The reason this precaution is needed is that the GNU kernel (the HURD)
-provides a user-extensible file system, in which there can be many
-different kinds of ``ordinary files.''  Many of them support
-@code{mmap}, but some do not.  It is important to make programs handle
-all these kinds of files.
-
-@node Documentation
-@chapter Documenting Programs
-@cindex documentation
-
-A GNU program should ideally come with full free documentation, adequate
-for both reference and tutorial purposes.  If the package can be
-programmed or extended, the documentation should cover programming or
-extending it, as well as just using it.
-
-@menu
-* GNU Manuals::                 Writing proper manuals.
-* Doc Strings and Manuals::     Compiling doc strings doesn't make a manual.
-* Manual Structure Details::    Specific structure conventions.
-* License for Manuals::         Writing the distribution terms for a manual.
-* Manual Credits::              Giving credit to documentation contributors.
-* Printed Manuals::             Mentioning the printed manual.
-* NEWS File::                   NEWS files supplement manuals.
-* Change Logs::                 Recording changes.
-* Man Pages::                   Man pages are secondary.
-* Reading other Manuals::       How far you can go in learning
-                                from other manuals.
-@end menu
-
-@node GNU Manuals
-@section GNU Manuals
-
-The preferred document format for the GNU system is the Texinfo
-formatting language.  Every GNU package should (ideally) have
-documentation in Texinfo both for reference and for learners.  Texinfo
-makes it possible to produce a good quality formatted book, using
-@TeX{}, and to generate an Info file.  It is also possible to generate
-HTML output from Texinfo source.  See the Texinfo manual, either the
-hardcopy, or the on-line version available through @code{info} or the
-Emacs Info subsystem (@kbd{C-h i}).
-
-Nowadays some other formats such as Docbook and Sgmltexi can be
-converted automatically into Texinfo.  It is ok to produce the Texinfo
-documentation by conversion this way, as long as it gives good results.
-
-Make sure your manual is clear to a reader who knows nothing about the
-topic and reads it straight through.  This means covering basic topics
-at the beginning, and advanced topics only later.  This also means
-defining every specialized term when it is first used.
-
-Programmers tend to carry over the structure of the program as the
-structure for its documentation.  But this structure is not
-necessarily good for explaining how to use the program; it may be
-irrelevant and confusing for a user.
-
-Instead, the right way to structure documentation is according to the
-concepts and questions that a user will have in mind when reading it.
-This principle applies at every level, from the lowest (ordering
-sentences in a paragraph) to the highest (ordering of chapter topics
-within the manual).  Sometimes this structure of ideas matches the
-structure of the implementation of the software being documented---but
-often they are different.  An important part of learning to write good
-documentation is to learn to notice when you have unthinkingly
-structured the documentation like the implementation, stop yourself,
-and look for better alternatives.
-
-For example, each program in the GNU system probably ought to be
-documented in one manual; but this does not mean each program should
-have its own manual.  That would be following the structure of the
-implementation, rather than the structure that helps the user
-understand.
-
-Instead, each manual should cover a coherent @emph{topic}.  For example,
-instead of a manual for @code{diff} and a manual for @code{diff3}, we
-have one manual for ``comparison of files'' which covers both of those
-programs, as well as @code{cmp}.  By documenting these programs
-together, we can make the whole subject clearer.
-
-The manual which discusses a program should certainly document all of
-the program's command-line options and all of its commands.  It should
-give examples of their use.  But don't organize the manual as a list
-of features.  Instead, organize it logically, by subtopics.  Address
-the questions that a user will ask when thinking about the job that
-the program does.  Don't just tell the reader what each feature can
-do---say what jobs it is good for, and show how to use it for those
-jobs.  Explain what is recommended usage, and what kinds of usage
-users should avoid.
-
-In general, a GNU manual should serve both as tutorial and reference.
-It should be set up for convenient access to each topic through Info,
-and for reading straight through (appendixes aside).  A GNU manual
-should give a good introduction to a beginner reading through from the
-start, and should also provide all the details that hackers want.
-The Bison manual is a good example of this---please take a look at it
-to see what we mean.
-
-That is not as hard as it first sounds.  Arrange each chapter as a
-logical breakdown of its topic, but order the sections, and write their
-text, so that reading the chapter straight through makes sense.  Do
-likewise when structuring the book into chapters, and when structuring a
-section into paragraphs.  The watchword is, @emph{at each point, address
-the most fundamental and important issue raised by the preceding text.}
-
-If necessary, add extra chapters at the beginning of the manual which
-are purely tutorial and cover the basics of the subject.  These provide
-the framework for a beginner to understand the rest of the manual.  The
-Bison manual provides a good example of how to do this.
-
-To serve as a reference, a manual should have an Index that list all the
-functions, variables, options, and important concepts that are part of
-the program.  One combined Index should do for a short manual, but
-sometimes for a complex package it is better to use multiple indices.
-The Texinfo manual includes advice on preparing good index entries, see
-@ref{Index Entries, , Making Index Entries, texinfo, GNU Texinfo}, and
-see @ref{Indexing Commands, , Defining the Entries of an
-Index, texinfo, GNU Texinfo}.
-
-Don't use Unix man pages as a model for how to write GNU documentation;
-most of them are terse, badly structured, and give inadequate
-explanation of the underlying concepts.  (There are, of course, some
-exceptions.)  Also, Unix man pages use a particular format which is
-different from what we use in GNU manuals.
-
-Please include an email address in the manual for where to report
-bugs @emph{in the text of the manual}.
-
-Please do not use the term ``pathname'' that is used in Unix
-documentation; use ``file name'' (two words) instead.  We use the term
-``path'' only for search paths, which are lists of directory names.
-
-Please do not use the term ``illegal'' to refer to erroneous input to
-a computer program.  Please use ``invalid'' for this, and reserve the
-term ``illegal'' for activities prohibited by law.
-
-Please do not write @samp{()} after a function name just to indicate
-it is a function.  @code{foo ()} is not a function, it is a function
-call with no arguments.
-
-@node Doc Strings and Manuals
-@section Doc Strings and Manuals
-
-Some programming systems, such as Emacs, provide a documentation string
-for each function, command or variable.  You may be tempted to write a
-reference manual by compiling the documentation strings and writing a
-little additional text to go around them---but you must not do it.  That
-approach is a fundamental mistake.  The text of well-written
-documentation strings will be entirely wrong for a manual.
-
-A documentation string needs to stand alone---when it appears on the
-screen, there will be no other text to introduce or explain it.
-Meanwhile, it can be rather informal in style.
-
-The text describing a function or variable in a manual must not stand
-alone; it appears in the context of a section or subsection.  Other text
-at the beginning of the section should explain some of the concepts, and
-should often make some general points that apply to several functions or
-variables.  The previous descriptions of functions and variables in the
-section will also have given information about the topic.  A description
-written to stand alone would repeat some of that information; this
-redundancy looks bad.  Meanwhile, the informality that is acceptable in
-a documentation string is totally unacceptable in a manual.
-
-The only good way to use documentation strings in writing a good manual
-is to use them as a source of information for writing good text.
-
-@node Manual Structure Details
-@section Manual Structure Details
-@cindex manual structure
-
-The title page of the manual should state the version of the programs or
-packages documented in the manual.  The Top node of the manual should
-also contain this information.  If the manual is changing more
-frequently than or independent of the program, also state a version
-number for the manual in both of these places.
-
-Each program documented in the manual should have a node named
-@samp{@var{program} Invocation} or @samp{Invoking @var{program}}.  This
-node (together with its subnodes, if any) should describe the program's
-command line arguments and how to run it (the sort of information people
-would look for in a man page).  Start with an @samp{@@example}
-containing a template for all the options and arguments that the program
-uses.
-
-Alternatively, put a menu item in some menu whose item name fits one of
-the above patterns.  This identifies the node which that item points to
-as the node for this purpose, regardless of the node's actual name.
-
-The @samp{--usage} feature of the Info reader looks for such a node
-or menu item in order to find the relevant text, so it is essential
-for every Texinfo file to have one.
-
-If one manual describes several programs, it should have such a node for
-each program described in the manual.
-
-@node License for Manuals
-@section License for Manuals
-@cindex license for manuals
-
-Please use the GNU Free Documentation License for all GNU manuals that
-are more than a few pages long.  Likewise for a collection of short
-documents---you only need one copy of the GNU FDL for the whole
-collection.  For a single short document, you can use a very permissive
-non-copyleft license, to avoid taking up space with a long license.
-
-See @uref{http://www.gnu.org/copyleft/fdl-howto.html} for more explanation
-of how to employ the GFDL.
-
-Note that it is not obligatory to include a copy of the GNU GPL or GNU
-LGPL in a manual whose license is neither the GPL nor the LGPL.  It can
-be a good idea to include the program's license in a large manual; in a
-short manual, whose size would be increased considerably by including
-the program's license, it is probably better not to include it.
-
-@node Manual Credits
-@section Manual Credits
-@cindex credits for manuals
-
-Please credit the principal human writers of the manual as the authors,
-on the title page of the manual.  If a company sponsored the work, thank
-the company in a suitable place in the manual, but do not cite the
-company as an author.
-
-@node Printed Manuals
-@section Printed Manuals
-
-The FSF publishes some GNU manuals in printed form.  To encourage sales
-of these manuals, the on-line versions of the manual should mention at
-the very start that the printed manual is available and should point at
-information for getting it---for instance, with a link to the page
-@url{http://www.gnu.org/order/order.html}.  This should not be included
-in the printed manual, though, because there it is redundant.
-
-It is also useful to explain in the on-line forms of the manual how the
-user can print out the manual from the sources.
-
-@node NEWS File
-@section The NEWS File
-@cindex @file{NEWS} file
-
-In addition to its manual, the package should have a file named
-@file{NEWS} which contains a list of user-visible changes worth
-mentioning.  In each new release, add items to the front of the file and
-identify the version they pertain to.  Don't discard old items; leave
-them in the file after the newer items.  This way, a user upgrading from
-any previous version can see what is new.
-
-If the @file{NEWS} file gets very long, move some of the older items
-into a file named @file{ONEWS} and put a note at the end referring the
-user to that file.
-
-@node Change Logs
-@section Change Logs
-@cindex change logs
-
-Keep a change log to describe all the changes made to program source
-files.  The purpose of this is so that people investigating bugs in the
-future will know about the changes that might have introduced the bug.
-Often a new bug can be found by looking at what was recently changed.
-More importantly, change logs can help you eliminate conceptual
-inconsistencies between different parts of a program, by giving you a
-history of how the conflicting concepts arose and who they came from.
-
-@menu
-* Change Log Concepts::
-* Style of Change Logs::
-* Simple Changes::
-* Conditional Changes::
-* Indicating the Part Changed::
-@end menu
-
-@node Change Log Concepts
-@subsection Change Log Concepts
-
-You can think of the change log as a conceptual ``undo list'' which
-explains how earlier versions were different from the current version.
-People can see the current version; they don't need the change log
-to tell them what is in it.  What they want from a change log is a
-clear explanation of how the earlier version differed.
-
-The change log file is normally called @file{ChangeLog} and covers an
-entire directory.  Each directory can have its own change log, or a
-directory can use the change log of its parent directory--it's up to
-you.
-
-Another alternative is to record change log information with a version
-control system such as RCS or CVS.  This can be converted automatically
-to a @file{ChangeLog} file using @code{rcs2log}; in Emacs, the command
-@kbd{C-x v a} (@code{vc-update-change-log}) does the job.
-
-There's no need to describe the full purpose of the changes or how they
-work together.  If you think that a change calls for explanation, you're
-probably right.  Please do explain it---but please put the explanation
-in comments in the code, where people will see it whenever they see the
-code.  For example, ``New function'' is enough for the change log when
-you add a function, because there should be a comment before the
-function definition to explain what it does.
-
-In the past, we recommended not mentioning changes in non-software
-files (manuals, help files, etc.) in change logs.  However, we've been
-advised that it is a good idea to include them, for the sake of
-copyright records.
-
-However, sometimes it is useful to write one line to describe the
-overall purpose of a batch of changes.
-
-The easiest way to add an entry to @file{ChangeLog} is with the Emacs
-command @kbd{M-x add-change-log-entry}.  An entry should have an
-asterisk, the name of the changed file, and then in parentheses the name
-of the changed functions, variables or whatever, followed by a colon.
-Then describe the changes you made to that function or variable.
-
-@node Style of Change Logs
-@subsection Style of Change Logs
-@cindex change logs, style
-
-Here are some simple examples of change log entries, starting with the
-header line that says who made the change and when it was installed,
-followed by descriptions of specific changes.  (These examples are
-drawn from Emacs and GCC.)
-
-@example
-1998-08-17  Richard Stallman  <rms@@gnu.org>
-
-* register.el (insert-register): Return nil.
-(jump-to-register): Likewise.
-
-* sort.el (sort-subr): Return nil.
-
-* tex-mode.el (tex-bibtex-file, tex-file, tex-region):
-Restart the tex shell if process is gone or stopped.
-(tex-shell-running): New function.
-
-* expr.c (store_one_arg): Round size up for move_block_to_reg.
-(expand_call): Round up when emitting USE insns.
-* stmt.c (assign_parms): Round size up for move_block_from_reg.
-@end example
-
-It's important to name the changed function or variable in full.  Don't
-abbreviate function or variable names, and don't combine them.
-Subsequent maintainers will often search for a function name to find all
-the change log entries that pertain to it; if you abbreviate the name,
-they won't find it when they search.
-
-For example, some people are tempted to abbreviate groups of function
-names by writing @samp{* register.el (@{insert,jump-to@}-register)};
-this is not a good idea, since searching for @code{jump-to-register} or
-@code{insert-register} would not find that entry.
-
-Separate unrelated change log entries with blank lines.  When two
-entries represent parts of the same change, so that they work together,
-then don't put blank lines between them.  Then you can omit the file
-name and the asterisk when successive entries are in the same file.
-
-Break long lists of function names by closing continued lines with
-@samp{)}, rather than @samp{,}, and opening the continuation with
-@samp{(} as in this example:
-
-@example
-* keyboard.c (menu_bar_items, tool_bar_items)
-(Fexecute_extended_command): Deal with `keymap' property.
-@end example
-
-When you install someone else's changes, put the contributor's name in
-the change log entry rather than in the text of the entry.  In other
-words, write this:
-
-@example
-2002-07-14  John Doe  <jdoe@@gnu.org>
-
-        * sewing.c: Make it sew.
-@end example
-
-@noindent
-rather than this:
-
-@example
-2002-07-14  Usual Maintainer  <usual@@gnu.org>
-
-        * sewing.c: Make it sew.  Patch by jdoe@@gnu.org.
-@end example
-
-As for the date, that should be the date you applied the change.
-
-@node Simple Changes
-@subsection Simple Changes
-
-Certain simple kinds of changes don't need much detail in the change
-log.
-
-When you change the calling sequence of a function in a simple fashion,
-and you change all the callers of the function to use the new calling
-sequence, there is no need to make individual entries for all the
-callers that you changed.  Just write in the entry for the function
-being called, ``All callers changed''---like this:
-
-@example
-* keyboard.c (Fcommand_execute): New arg SPECIAL.
-All callers changed.
-@end example
-
-When you change just comments or doc strings, it is enough to write an
-entry for the file, without mentioning the functions.  Just ``Doc
-fixes'' is enough for the change log.
-
-There's no technical need to make change log entries for documentation
-files.  This is because documentation is not susceptible to bugs that
-are hard to fix.  Documentation does not consist of parts that must
-interact in a precisely engineered fashion.  To correct an error, you
-need not know the history of the erroneous passage; it is enough to
-compare what the documentation says with the way the program actually
-works.
-
-However, you should keep change logs for documentation files when the
-project gets copyright assignments from its contributors, so as to
-make the records of authorship more accurate.
-
-@node Conditional Changes
-@subsection Conditional Changes
-@cindex conditional changes, and change logs
-@cindex change logs, conditional changes
-
-C programs often contain compile-time @code{#if} conditionals.  Many
-changes are conditional; sometimes you add a new definition which is
-entirely contained in a conditional.  It is very useful to indicate in
-the change log the conditions for which the change applies.
-
-Our convention for indicating conditional changes is to use square
-brackets around the name of the condition.
-
-Here is a simple example, describing a change which is conditional but
-does not have a function or entity name associated with it:
-
-@example
-* xterm.c [SOLARIS2]: Include string.h.
-@end example
-
-Here is an entry describing a new definition which is entirely
-conditional.  This new definition for the macro @code{FRAME_WINDOW_P} is
-used only when @code{HAVE_X_WINDOWS} is defined:
-
-@example
-* frame.h [HAVE_X_WINDOWS] (FRAME_WINDOW_P): Macro defined.
-@end example
-
-Here is an entry for a change within the function @code{init_display},
-whose definition as a whole is unconditional, but the changes themselves
-are contained in a @samp{#ifdef HAVE_LIBNCURSES} conditional:
-
-@example
-* dispnew.c (init_display) [HAVE_LIBNCURSES]: If X, call tgetent.
-@end example
-
-Here is an entry for a change that takes affect only when
-a certain macro is @emph{not} defined:
-
-@example
-(gethostname) [!HAVE_SOCKETS]: Replace with winsock version.
-@end example
-
-@node Indicating the Part Changed
-@subsection Indicating the Part Changed
-
-Indicate the part of a function which changed by using angle brackets
-enclosing an indication of what the changed part does.  Here is an entry
-for a change in the part of the function @code{sh-while-getopts} that
-deals with @code{sh} commands:
-
-@example
-* progmodes/sh-script.el (sh-while-getopts) <sh>: Handle case that
-user-specified option string is empty.
-@end example
-
-
-@node Man Pages
-@section Man Pages
-@cindex man pages
-
-In the GNU project, man pages are secondary.  It is not necessary or
-expected for every GNU program to have a man page, but some of them do.
-It's your choice whether to include a man page in your program.
-
-When you make this decision, consider that supporting a man page
-requires continual effort each time the program is changed.  The time
-you spend on the man page is time taken away from more useful work.
-
-For a simple program which changes little, updating the man page may be
-a small job.  Then there is little reason not to include a man page, if
-you have one.
-
-For a large program that changes a great deal, updating a man page may
-be a substantial burden.  If a user offers to donate a man page, you may
-find this gift costly to accept.  It may be better to refuse the man
-page unless the same person agrees to take full responsibility for
-maintaining it---so that you can wash your hands of it entirely.  If
-this volunteer later ceases to do the job, then don't feel obliged to
-pick it up yourself; it may be better to withdraw the man page from the
-distribution until someone else agrees to update it.
-
-When a program changes only a little, you may feel that the
-discrepancies are small enough that the man page remains useful without
-updating.  If so, put a prominent note near the beginning of the man
-page explaining that you don't maintain it and that the Texinfo manual
-is more authoritative.  The note should say how to access the Texinfo
-documentation.
-
-Be sure that man pages include a copyright statement and free
-license.  The simple all-permissive license is appropriate for simple
-man pages:
-
-@example
-Copying and distribution of this file, with or without modification,
-are permitted in any medium without royalty provided the copyright
-notice and this notice are preserved.
-@end example
-
-For long man pages, with enough explanation and documentation that
-they can be considered true manuals, use the GFDL (@pxref{License for
-Manuals}).
-
-Finally, the GNU help2man program
-(@uref{http://www.gnu.org/software/help2man/}) is one way to automate
-generation of a man page, in this case from @option{--help} output.
-This is sufficient in many cases.
-
-@node Reading other Manuals
-@section Reading other Manuals
-
-There may be non-free books or documentation files that describe the
-program you are documenting.
-
-It is ok to use these documents for reference, just as the author of a
-new algebra textbook can read other books on algebra.  A large portion
-of any non-fiction book consists of facts, in this case facts about how
-a certain program works, and these facts are necessarily the same for
-everyone who writes about the subject.  But be careful not to copy your
-outline structure, wording, tables or examples from preexisting non-free
-documentation.  Copying from free documentation may be ok; please check
-with the FSF about the individual case.
-
-@node Managing Releases
-@chapter The Release Process
-@cindex releasing
-
-Making a release is more than just bundling up your source files in a
-tar file and putting it up for FTP.  You should set up your software so
-that it can be configured to run on a variety of systems.  Your Makefile
-should conform to the GNU standards described below, and your directory
-layout should also conform to the standards discussed below.  Doing so
-makes it easy to include your package into the larger framework of
-all GNU software.
-
-@menu
-* Configuration::               How configuration of GNU packages should work.
-* Makefile Conventions::        Makefile conventions.
-* Releases::                    Making releases
-@end menu
-
-@node Configuration
-@section How Configuration Should Work
-@cindex program configuration
-
-@pindex configure
-Each GNU distribution should come with a shell script named
-@code{configure}.  This script is given arguments which describe the
-kind of machine and system you want to compile the program for.
-
-The @code{configure} script must record the configuration options so
-that they affect compilation.
-
-One way to do this is to make a link from a standard name such as
-@file{config.h} to the proper configuration file for the chosen system.
-If you use this technique, the distribution should @emph{not} contain a
-file named @file{config.h}.  This is so that people won't be able to
-build the program without configuring it first.
-
-Another thing that @code{configure} can do is to edit the Makefile.  If
-you do this, the distribution should @emph{not} contain a file named
-@file{Makefile}.  Instead, it should include a file @file{Makefile.in} which
-contains the input used for editing.  Once again, this is so that people
-won't be able to build the program without configuring it first.
-
-If @code{configure} does write the @file{Makefile}, then @file{Makefile}
-should have a target named @file{Makefile} which causes @code{configure}
-to be rerun, setting up the same configuration that was set up last
-time.  The files that @code{configure} reads should be listed as
-dependencies of @file{Makefile}.
-
-All the files which are output from the @code{configure} script should
-have comments at the beginning explaining that they were generated
-automatically using @code{configure}.  This is so that users won't think
-of trying to edit them by hand.
-
-The @code{configure} script should write a file named @file{config.status}
-which describes which configuration options were specified when the
-program was last configured.  This file should be a shell script which,
-if run, will recreate the same configuration.
-
-The @code{configure} script should accept an option of the form
-@samp{--srcdir=@var{dirname}} to specify the directory where sources are found
-(if it is not the current directory).  This makes it possible to build
-the program in a separate directory, so that the actual source directory
-is not modified.
-
-If the user does not specify @samp{--srcdir}, then @code{configure} should
-check both @file{.} and @file{..} to see if it can find the sources.  If
-it finds the sources in one of these places, it should use them from
-there.  Otherwise, it should report that it cannot find the sources, and
-should exit with nonzero status.
-
-Usually the easy way to support @samp{--srcdir} is by editing a
-definition of @code{VPATH} into the Makefile.  Some rules may need to
-refer explicitly to the specified source directory.  To make this
-possible, @code{configure} can add to the Makefile a variable named
-@code{srcdir} whose value is precisely the specified directory.
-
-The @code{configure} script should also take an argument which specifies the
-type of system to build the program for.  This argument should look like
-this:
-
-@example
-@var{cpu}-@var{company}-@var{system}
-@end example
-
-For example, an Athlon-based GNU/Linux system might be
-@samp{i686-pc-linux-gnu}.
-
-The @code{configure} script needs to be able to decode all plausible
-alternatives for how to describe a machine.  Thus,
-@samp{athlon-pc-gnu/linux} would be a valid alias.  There is a shell
-script called
-@uref{http://savannah.gnu.org/@/cgi-bin/@/viewcvs/@/*checkout*/@/config/@/config/@/config.sub,
-@file{config.sub}} that you can use as a subroutine to validate system
-types and canonicalize aliases.
-
-The @code{configure} script should also take the option
-@option{--build=@var{buildtype}}, which should be equivalent to a
-plain @var{buildtype} argument.  For example, @samp{configure
---build=i686-pc-linux-gnu} is equivalent to @samp{configure
-i686-pc-linux-gnu}.  When the build type is not specified by an option
-or argument, the @code{configure} script should normally guess it using
-the shell script
-@uref{http://savannah.gnu.org/@/cgi-bin/@/viewcvs/@/*checkout*/@/config/@/config/@/config.guess,
-@file{config.guess}}.
-
-@cindex optional features, configure-time
-Other options are permitted to specify in more detail the software
-or hardware present on the machine, to include or exclude optional parts
-of the package, or to adjust the name of some tools or arguments to them:
-
-@table @samp
-@item --enable-@var{feature}@r{[}=@var{parameter}@r{]}
-Configure the package to build and install an optional user-level
-facility called @var{feature}.  This allows users to choose which
-optional features to include.  Giving an optional @var{parameter} of
-@samp{no} should omit @var{feature}, if it is built by default.
-
-No @samp{--enable} option should @strong{ever} cause one feature to
-replace another.  No @samp{--enable} option should ever substitute one
-useful behavior for another useful behavior.  The only proper use for
-@samp{--enable} is for questions of whether to build part of the program
-or exclude it.
-
-@item --with-@var{package}
-@c @r{[}=@var{parameter}@r{]}
-The package @var{package} will be installed, so configure this package
-to work with @var{package}.
-
-@c  Giving an optional @var{parameter} of
-@c @samp{no} should omit @var{package}, if it is used by default.
-
-Possible values of @var{package} include
-@samp{gnu-as} (or @samp{gas}), @samp{gnu-ld}, @samp{gnu-libc},
-@samp{gdb},
-@samp{x},
-and
-@samp{x-toolkit}.
-
-Do not use a @samp{--with} option to specify the file name to use to
-find certain files.  That is outside the scope of what @samp{--with}
-options are for.
-
-@item @var{variable}=@var{value}
-Set the value of the variable @var{variable} to @var{value}.  This is
-used to override the default values of commands or arguments in the
-build process.  For example, the user could issue @samp{configure
-CFLAGS=-g CXXFLAGS=-g} to build with debugging information and without
-the default optimization.
-
-Specifying variables as arguments to @code{configure}, like this:
-@example
-./configure CC=gcc
-@end example
-is preferable to setting them in environment variables:
-@example
-CC=gcc ./configure
-@end example
-as it helps to recreate the same configuration later with
-@file{config.status}.
-@end table
-
-All @code{configure} scripts should accept all of the ``detail''
-options and the variable settings, whether or not they make any
-difference to the particular package at hand.  In particular, they
-should accept any option that starts with @samp{--with-} or
-@samp{--enable-}.  This is so users will be able to configure an
-entire GNU source tree at once with a single set of options.
-
-You will note that the categories @samp{--with-} and @samp{--enable-}
-are narrow: they @strong{do not} provide a place for any sort of option
-you might think of.  That is deliberate.  We want to limit the possible
-configuration options in GNU software.  We do not want GNU programs to
-have idiosyncratic configuration options.
-
-Packages that perform part of the compilation process may support
-cross-compilation.  In such a case, the host and target machines for the
-program may be different.
-
-The @code{configure} script should normally treat the specified type of
-system as both the host and the target, thus producing a program which
-works for the same type of machine that it runs on.
-
-To compile a program to run on a host type that differs from the build
-type, use the configure option @option{--host=@var{hosttype}}, where
-@var{hosttype} uses the same syntax as @var{buildtype}.  The host type
-normally defaults to the build type.
-
-To configure a cross-compiler, cross-assembler, or what have you, you
-should specify a target different from the host, using the configure
-option @samp{--target=@var{targettype}}.  The syntax for
-@var{targettype} is the same as for the host type.  So the command would
-look like this:
-
-@example
-./configure --host=@var{hosttype} --target=@var{targettype}
-@end example
-
-The target type normally defaults to the host type.
-Programs for which cross-operation is not meaningful need not accept the
-@samp{--target} option, because configuring an entire operating system for
-cross-operation is not a meaningful operation.
-
-Some programs have ways of configuring themselves automatically.  If
-your program is set up to do this, your @code{configure} script can simply
-ignore most of its arguments.
-
-@comment The makefile standards are in a separate file that is also
-@comment included by make.texinfo.  Done by roland@gnu.ai.mit.edu on 1/6/93.
-@comment For this document, turn chapters into sections, etc.
-@lowersections
-@include make-stds.texi
-@raisesections
-
-@node Releases
-@section Making Releases
-@cindex packaging
-
-You should identify each release with a pair of version numbers, a
-major version and a minor.  We have no objection to using more than
-two numbers, but it is very unlikely that you really need them.
-
-Package the distribution of @code{Foo version 69.96} up in a gzipped tar
-file with the name @file{foo-69.96.tar.gz}.  It should unpack into a
-subdirectory named @file{foo-69.96}.
-
-Building and installing the program should never modify any of the files
-contained in the distribution.  This means that all the files that form
-part of the program in any way must be classified into @dfn{source
-files} and @dfn{non-source files}.  Source files are written by humans
-and never changed automatically; non-source files are produced from
-source files by programs under the control of the Makefile.
-
-@cindex @file{README} file
-The distribution should contain a file named @file{README} which gives
-the name of the package, and a general description of what it does.  It
-is also good to explain the purpose of each of the first-level
-subdirectories in the package, if there are any.  The @file{README} file
-should either state the version number of the package, or refer to where
-in the package it can be found.
-
-The @file{README} file should refer to the file @file{INSTALL}, which
-should contain an explanation of the installation procedure.
-
-The @file{README} file should also refer to the file which contains the
-copying conditions.  The GNU GPL, if used, should be in a file called
-@file{COPYING}.  If the GNU LGPL is used, it should be in a file called
-@file{COPYING.LIB}.
-
-Naturally, all the source files must be in the distribution.  It is okay
-to include non-source files in the distribution, provided they are
-up-to-date and machine-independent, so that building the distribution
-normally will never modify them.  We commonly include non-source files
-produced by Bison, @code{lex}, @TeX{}, and @code{makeinfo}; this helps avoid
-unnecessary dependencies between our distributions, so that users can
-install whichever packages they want to install.
-
-Non-source files that might actually be modified by building and
-installing the program should @strong{never} be included in the
-distribution.  So if you do distribute non-source files, always make
-sure they are up to date when you make a new distribution.
-
-Make sure that the directory into which the distribution unpacks (as
-well as any subdirectories) are all world-writable (octal mode 777).
-This is so that old versions of @code{tar} which preserve the
-ownership and permissions of the files from the tar archive will be
-able to extract all the files even if the user is unprivileged.
-
-Make sure that all the files in the distribution are world-readable.
-
-Don't include any symbolic links in the distribution itself.  If the tar
-file contains symbolic links, then people cannot even unpack it on
-systems that don't support symbolic links.  Also, don't use multiple
-names for one file in different directories, because certain file
-systems cannot handle this and that prevents unpacking the
-distribution.
-
-Try to make sure that all the file names will be unique on MS-DOS.  A
-name on MS-DOS consists of up to 8 characters, optionally followed by a
-period and up to three characters.  MS-DOS will truncate extra
-characters both before and after the period.  Thus,
-@file{foobarhacker.c} and @file{foobarhacker.o} are not ambiguous; they
-are truncated to @file{foobarha.c} and @file{foobarha.o}, which are
-distinct.
-
-@cindex @file{texinfo.tex}, in a distribution
-Include in your distribution a copy of the @file{texinfo.tex} you used
-to test print any @file{*.texinfo} or @file{*.texi} files.
-
-Likewise, if your program uses small GNU software packages like regex,
-getopt, obstack, or termcap, include them in the distribution file.
-Leaving them out would make the distribution file a little smaller at
-the expense of possible inconvenience to a user who doesn't know what
-other files to get.
-
-@node References
-@chapter References to Non-Free Software and Documentation
-@cindex references to non-free material
-
-A GNU program should not recommend use of any non-free program.  We
-can't stop some people from writing proprietary programs, or stop
-other people from using them, but we can and should refuse to
-advertise them to new potential customers.  Proprietary software is a
-social and ethical problem, and the point of GNU is to solve that
-problem.
-
-The GNU definition of free software is found on the GNU web site at
-@url{http://www.gnu.org/philosophy/free-sw.html}, and the definition
-of free documentation is found at
-@url{http://www.gnu.org/philosophy/free-doc.html}.  A list of
-important licenses and whether they qualify as free is in
-@url{http://www.gnu.org/@/licenses/@/license-list.html}.  The terms
-``free'' and ``non-free'', used in this document, refer to that
-definition.  If it is not clear whether a license qualifies as free
-under this definition, please ask the GNU Project by writing to
-@email{licensing@@gnu.org}.  We will answer, and if the license is an
-important one, we will add it to the list.
-
-When a non-free program or system is well known, you can mention it in
-passing---that is harmless, since users who might want to use it
-probably already know about it.  For instance, it is fine to explain
-how to build your package on top of some widely used non-free
-operating system, or how to use it together with some widely used
-non-free program.
-
-However, you should give only the necessary information to help those
-who already use the non-free program to use your program with
-it---don't give, or refer to, any further information about the
-proprietary program, and don't imply that the proprietary program
-enhances your program, or that its existence is in any way a good
-thing.  The goal should be that people already using the proprietary
-program will get the advice they need about how to use your free
-program with it, while people who don't already use the proprietary
-program will not see anything to lead them to take an interest in it.
-
-If a non-free program or system is obscure in your program's domain,
-your program should not mention or support it at all, since doing so
-would tend to popularize the non-free program more than it popularizes
-your program.  (You cannot hope to find many additional users among
-the users of Foobar if the users of Foobar are few.)
-
-Sometimes a program is free software in itself but depends on a
-non-free platform in order to run.  For instance, many Java programs
-depend on the parts of Sun's Java implementation which are not yet
-free software, and won't run on the GNU Java Compiler (which does not
-yet have all the features) or won't run with the GNU Java libraries.
-We hope this particular problem will be gone in a few months, when Sun
-makes the standard Java libraries free software, but of course the
-general principle remains: you should not recommend programs that
-depend on non-free software to run.
-
-Some free programs encourage the use of non-free software.  A typical
-example is @command{mplayer}.  It is free software in itself, and the
-free code can handle some kinds of files.  However, @command{mplayer}
-recommends use of non-free codecs for other kinds of files, and users
-that install @command{mplayer} are very likely to install those codecs
-along with it.  To recommend @command{mplayer} is, in effect, to
-recommend the non-free codecs.  We must not do that, so we cannot
-recommend @command{mplayer} either.
-
-In general, you should also not recommend programs that themselves
-strongly recommend the use of non-free software.
-
-A GNU package should not refer the user to any non-free documentation
-for free software.  Free documentation that can be included in free
-operating systems is essential for completing the GNU system, or any
-free operating system, so it is a major focus of the GNU Project; to
-recommend use of documentation that we are not allowed to use in GNU
-would weaken the impetus for the community to produce documentation
-that we can include.  So GNU packages should never recommend non-free
-documentation.
-
-By contrast, it is ok to refer to journal articles and textbooks in
-the comments of a program for explanation of how it functions, even
-though they be non-free.  This is because we don't include such things
-in the GNU system even if we are allowed to---they are outside the
-scope of an operating system project.
-
-Referring to a web site that describes or recommends a non-free
-program is in effect promoting that software, so please do not make
-links (or mention by name) web sites that contain such material.  This
-policy is relevant particularly for the web pages for a GNU package.
-
-Following links from nearly any web site can lead to non-free
-software; this is an inescapable aspect of the nature of the web, and
-in itself is no objection to linking to a site.  As long as the site
-does not itself recommend a non-free program, there is no need be
-concerned about the sites it links to for other reasons.
-
-Thus, for example, you should not make a link to AT&T's web site,
-because that recommends AT&T's non-free software packages; you should
-not make a link to a site that links to AT&T's site saying it is a
-place to get a non-free program; but if a site you want to link to
-refers to AT&T's web site in some other context (such as long-distance
-telephone service), that is not a problem.
-
-
-@node GNU Free Documentation License
-@appendix GNU Free Documentation License
-
-@cindex FDL, GNU Free Documentation License
-@include fdl.texi
-
-@node Index
-@unnumbered Index
-@printindex cp
-
-@bye
-
-Local variables:
-eval: (add-hook 'write-file-hooks 'time-stamp)
-time-stamp-start: "@set lastupdate "
-time-stamp-end: "$"
-time-stamp-format: "%:b %:d, %:y"
-compile-command: "make just-standards"
-End:
diff --git a/etc/texi2pod.pl b/etc/texi2pod.pl
deleted file mode 100644
index cd0ffd943..000000000
--- a/etc/texi2pod.pl
+++ /dev/null
@@ -1,478 +0,0 @@
-#! /usr/bin/perl -w
-
-#   Copyright (C) 1999, 2000, 2001, 2003 Free Software Foundation, Inc.
-
-# This file is part of GCC.
-
-# GCC is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# GCC is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with GCC; see the file COPYING.  If not, write to
-# the Free Software Foundation, 51 Franklin Street, Fifth Floor,
-# Boston MA 02110-1301, USA.
-
-# This does trivial (and I mean _trivial_) conversion of Texinfo
-# markup to Perl POD format.  It's intended to be used to extract
-# something suitable for a manpage from a Texinfo document.
-
-$output = 0;
-$skipping = 0;
-%sects = ();
-$section = "";
-@icstack = ();
-@endwstack = ();
-@skstack = ();
-@instack = ();
-$shift = "";
-%defs = ();
-$fnno = 1;
-$inf = "";
-$ibase = "";
-@ipath = ();
-
-while ($_ = shift) {
-    if (/^-D(.*)$/) {
-	if ($1 ne "") {
-	    $flag = $1;
-	} else {
-	    $flag = shift;
-	}
-	$value = "";
-	($flag, $value) = ($flag =~ /^([^=]+)(?:=(.+))?/);
-	die "no flag specified for -D\n"
-	    unless $flag ne "";
-	die "flags may only contain letters, digits, hyphens, dashes and underscores\n"
-	    unless $flag =~ /^[a-zA-Z0-9_-]+$/;
-	$defs{$flag} = $value;
-    } elsif (/^-I(.*)$/) {
-	if ($1 ne "") {
-	    $flag = $1;
-	} else {
-	    $flag = shift;
-	}
-        push (@ipath, $flag);
-    } elsif (/^-/) {
-	usage();
-    } else {
-	$in = $_, next unless defined $in;
-	$out = $_, next unless defined $out;
-	usage();
-    }
-}
-
-if (defined $in) {
-    $inf = gensym();
-    open($inf, "<$in") or die "opening \"$in\": $!\n";
-    $ibase = $1 if $in =~ m|^(.+)/[^/]+$|;
-} else {
-    $inf = \*STDIN;
-}
-
-if (defined $out) {
-    open(STDOUT, ">$out") or die "opening \"$out\": $!\n";
-}
-
-while(defined $inf) {
-while(<$inf>) {
-    # Certain commands are discarded without further processing.
-    /^\@(?:
-	 [a-z]+index		# @*index: useful only in complete manual
-	 |need			# @need: useful only in printed manual
-	 |(?:end\s+)?group	# @group .. @end group: ditto
-	 |page			# @page: ditto
-	 |node			# @node: useful only in .info file
-	 |(?:end\s+)?ifnottex   # @ifnottex .. @end ifnottex: use contents
-	)\b/x and next;
-
-    chomp;
-
-    # Look for filename and title markers.
-    /^\@setfilename\s+([^.]+)/ and $fn = $1, next;
-    /^\@settitle\s+([^.]+)/ and $tl = postprocess($1), next;
-
-    # Identify a man title but keep only the one we are interested in.
-    /^\@c\s+man\s+title\s+([A-Za-z0-9-]+)\s+(.+)/ and do {
-	if (exists $defs{$1}) {
-	    $fn = $1;
-	    $tl = postprocess($2);
-	}
-	next;
-    };
-
-    # Look for blocks surrounded by @c man begin SECTION ... @c man end.
-    # This really oughta be @ifman ... @end ifman and the like, but such
-    # would require rev'ing all other Texinfo translators.
-    /^\@c\s+man\s+begin\s+([A-Z]+)\s+([A-Za-z0-9-]+)/ and do {
-	$output = 1 if exists $defs{$2};
-        $sect = $1;
-	next;
-    };
-    /^\@c\s+man\s+begin\s+([A-Z]+)/ and $sect = $1, $output = 1, next;
-    /^\@c\s+man\s+end/ and do {
-	$sects{$sect} = "" unless exists $sects{$sect};
-	$sects{$sect} .= postprocess($section);
-	$section = "";
-	$output = 0;
-	next;
-    };
-
-    # handle variables
-    /^\@set\s+([a-zA-Z0-9_-]+)\s*(.*)$/ and do {
-	$defs{$1} = $2;
-	next;
-    };
-    /^\@clear\s+([a-zA-Z0-9_-]+)/ and do {
-	delete $defs{$1};
-	next;
-    };
-
-    next unless $output;
-
-    # Discard comments.  (Can't do it above, because then we'd never see
-    # @c man lines.)
-    /^\@c\b/ and next;
-
-    # End-block handler goes up here because it needs to operate even
-    # if we are skipping.
-    /^\@end\s+([a-z]+)/ and do {
-	# Ignore @end foo, where foo is not an operation which may
-	# cause us to skip, if we are presently skipping.
-	my $ended = $1;
-	next if $skipping && $ended !~ /^(?:ifset|ifclear|ignore|menu|iftex|copying)$/;
-
-	die "\@end $ended without \@$ended at line $.\n" unless defined $endw;
-	die "\@$endw ended by \@end $ended at line $.\n" unless $ended eq $endw;
-
-	$endw = pop @endwstack;
-
-	if ($ended =~ /^(?:ifset|ifclear|ignore|menu|iftex)$/) {
-	    $skipping = pop @skstack;
-	    next;
-	} elsif ($ended =~ /^(?:example|smallexample|display)$/) {
-	    $shift = "";
-	    $_ = "";	# need a paragraph break
-	} elsif ($ended =~ /^(?:itemize|enumerate|[fv]?table)$/) {
-	    $_ = "\n=back\n";
-	    $ic = pop @icstack;
-	} elsif ($ended eq "multitable") {
-	    $_ = "\n=back\n";
-	} else {
-	    die "unknown command \@end $ended at line $.\n";
-	}
-    };
-
-    # We must handle commands which can cause skipping even while we
-    # are skipping, otherwise we will not process nested conditionals
-    # correctly.
-    /^\@ifset\s+([a-zA-Z0-9_-]+)/ and do {
-	push @endwstack, $endw;
-	push @skstack, $skipping;
-	$endw = "ifset";
-	$skipping = 1 unless exists $defs{$1};
-	next;
-    };
-
-    /^\@ifclear\s+([a-zA-Z0-9_-]+)/ and do {
-	push @endwstack, $endw;
-	push @skstack, $skipping;
-	$endw = "ifclear";
-	$skipping = 1 if exists $defs{$1};
-	next;
-    };
-
-    /^\@(ignore|menu|iftex|copying)\b/ and do {
-	push @endwstack, $endw;
-	push @skstack, $skipping;
-	$endw = $1;
-	$skipping = 1;
-	next;
-    };
-
-    next if $skipping;
-
-    # Character entities.  First the ones that can be replaced by raw text
-    # or discarded outright:
-    s/\@copyright\{\}/(c)/g;
-    s/\@dots\{\}/.../g;
-    s/\@enddots\{\}/..../g;
-    s/\@([.!? ])/$1/g;
-    s/\@[:-]//g;
-    s/\@bullet(?:\{\})?/*/g;
-    s/\@TeX\{\}/TeX/g;
-    s/\@pounds\{\}/\#/g;
-    s/\@minus(?:\{\})?/-/g;
-    s/\\,/,/g;
-
-    # Now the ones that have to be replaced by special escapes
-    # (which will be turned back into text by unmunge())
-    s/&/&amp;/g;
-    s/\@\{/&lbrace;/g;
-    s/\@\}/&rbrace;/g;
-    s/\@\@/&at;/g;
-
-    # Inside a verbatim block, handle @var specially.
-    if ($shift ne "") {
-	s/\@var\{([^\}]*)\}/<$1>/g;
-    }
-
-    # POD doesn't interpret E<> inside a verbatim block.
-    if ($shift eq "") {
-	s/</&lt;/g;
-	s/>/&gt;/g;
-    } else {
-	s/</&LT;/g;
-	s/>/&GT;/g;
-    }
-
-    # Single line command handlers.
-
-    /^\@include\s+(.+)$/ and do {
-	push @instack, $inf;
-	$inf = gensym();
-	$file = postprocess($1);
-
-	# Try cwd and $ibase, then explicit -I paths.
-	$done = 0;
-	foreach $path ("", $ibase, @ipath) {
-	    $mypath = $file;
-	    $mypath = $path . "/" . $mypath if ($path ne "");
-	    open($inf, "<" . $mypath) and ($done = 1, last);
-	}
-	die "cannot find $file" if !$done;
-	next;
-    };
-
-    /^\@(?:section|unnumbered|unnumberedsec|center)\s+(.+)$/
-	and $_ = "\n=head2 $1\n";
-    /^\@subsection\s+(.+)$/
-	and $_ = "\n=head3 $1\n";
-    /^\@subsubsection\s+(.+)$/
-	and $_ = "\n=head4 $1\n";
-
-    # Block command handlers:
-    /^\@itemize(?:\s+(\@[a-z]+|\*|-))?/ and do {
-	push @endwstack, $endw;
-	push @icstack, $ic;
-	if (defined $1) {
-	    $ic = $1;
-	} else {
-	    $ic = '*';
-	}
-	$_ = "\n=over 4\n";
-	$endw = "itemize";
-    };
-
-    /^\@enumerate(?:\s+([a-zA-Z0-9]+))?/ and do {
-	push @endwstack, $endw;
-	push @icstack, $ic;
-	if (defined $1) {
-	    $ic = $1 . ".";
-	} else {
-	    $ic = "1.";
-	}
-	$_ = "\n=over 4\n";
-	$endw = "enumerate";
-    };
-
-    /^\@multitable\s.*/ and do {
-	push @endwstack, $endw;
-	$endw = "multitable";
-	$_ = "\n=over 4\n";
-    };
-
-    /^\@([fv]?table)\s+(\@[a-z]+)/ and do {
-	push @endwstack, $endw;
-	push @icstack, $ic;
-	$endw = $1;
-	$ic = $2;
-	$ic =~ s/\@(?:samp|strong|key|gcctabopt|env)/B/;
-	$ic =~ s/\@(?:code|kbd)/C/;
-	$ic =~ s/\@(?:dfn|var|emph|cite|i)/I/;
-	$ic =~ s/\@(?:file)/F/;
-	$_ = "\n=over 4\n";
-    };
-
-    /^\@((?:small)?example|display)/ and do {
-	push @endwstack, $endw;
-	$endw = $1;
-	$shift = "\t";
-	$_ = "";	# need a paragraph break
-    };
-
-    /^\@item\s+(.*\S)\s*$/ and $endw eq "multitable" and do {
-	@columns = ();
-	for $column (split (/\s*\@tab\s*/, $1)) {
-	    # @strong{...} is used a @headitem work-alike
-	    $column =~ s/^\@strong{(.*)}$/$1/;
-	    push @columns, $column;
-	}
-	$_ = "\n=item ".join (" : ", @columns)."\n";
-    };
-
-    /^\@itemx?\s*(.+)?$/ and do {
-	if (defined $1) {
-	    # Entity escapes prevent munging by the <> processing below.
-	    $_ = "\n=item $ic\&LT;$1\&GT;\n";
-	} else {
-	    $_ = "\n=item $ic\n";
-	    $ic =~ y/A-Ya-y/B-Zb-z/;
-	    $ic =~ s/(\d+)/$1 + 1/eg;
-	}
-    };
-
-    $section .= $shift.$_."\n";
-}
-# End of current file.
-close($inf);
-$inf = pop @instack;
-}
-
-die "No filename or title\n" unless defined $fn && defined $tl;
-
-$sects{NAME} = "$fn \- $tl\n";
-$sects{FOOTNOTES} .= "=back\n" if exists $sects{FOOTNOTES};
-
-for $sect (qw(NAME SYNOPSIS DESCRIPTION OPTIONS ENVIRONMENT FILES
-	      BUGS NOTES FOOTNOTES SEEALSO AUTHOR COPYRIGHT)) {
-    if(exists $sects{$sect}) {
-	$head = $sect;
-	$head =~ s/SEEALSO/SEE ALSO/;
-	print "=head1 $head\n\n";
-	print scalar unmunge ($sects{$sect});
-	print "\n";
-    }
-}
-
-sub usage
-{
-    die "usage: $0 [-D toggle...] [infile [outfile]]\n";
-}
-
-sub postprocess
-{
-    local $_ = $_[0];
-
-    # @value{foo} is replaced by whatever 'foo' is defined as.
-    while (m/(\@value\{([a-zA-Z0-9_-]+)\})/g) {
-	if (! exists $defs{$2}) {
-	    print STDERR "Option $2 not defined\n";
-	    s/\Q$1\E//;
-	} else {
-	    $value = $defs{$2};
-	    s/\Q$1\E/$value/;
-	}
-    }
-
-    # Formatting commands.
-    # Temporary escape for @r.
-    s/\@r\{([^\}]*)\}/R<$1>/g;
-    s/\@(?:dfn|var|emph|cite|i)\{([^\}]*)\}/I<$1>/g;
-    s/\@(?:code|kbd)\{([^\}]*)\}/C<$1>/g;
-    s/\@(?:gccoptlist|samp|strong|key|option|env|command|b)\{([^\}]*)\}/B<$1>/g;
-    s/\@sc\{([^\}]*)\}/\U$1/g;
-    s/\@file\{([^\}]*)\}/F<$1>/g;
-    s/\@w\{([^\}]*)\}/S<$1>/g;
-    s/\@(?:dmn|math)\{([^\}]*)\}/$1/g;
-
-    # keep references of the form @ref{...}, print them bold
-    s/\@(?:ref)\{([^\}]*)\}/B<$1>/g;
-
-    # Change double single quotes to double quotes.
-    s/''/"/g;
-    s/``/"/g;
-
-    # Cross references are thrown away, as are @noindent and @refill.
-    # (@noindent is impossible in .pod, and @refill is unnecessary.)
-    # @* is also impossible in .pod; we discard it and any newline that
-    # follows it.  Similarly, our macro @gol must be discarded.
-
-    s/\(?\@xref\{(?:[^\}]*)\}(?:[^.<]|(?:<[^<>]*>))*\.\)?//g;
-    s/\s+\(\@pxref\{(?:[^\}]*)\}\)//g;
-    s/;\s+\@pxref\{(?:[^\}]*)\}//g;
-    s/\@noindent\s*//g;
-    s/\@refill//g;
-    s/\@gol//g;
-    s/\@\*\s*\n?//g;
-
-    # Anchors are thrown away
-    s/\@anchor\{(?:[^\}]*)\}//g;
-
-    # @uref can take one, two, or three arguments, with different
-    # semantics each time.  @url and @email are just like @uref with
-    # one argument, for our purposes.
-    s/\@(?:uref|url|email)\{([^\},]*)\}/&lt;B<$1>&gt;/g;
-    s/\@uref\{([^\},]*),([^\},]*)\}/$2 (C<$1>)/g;
-    s/\@uref\{([^\},]*),([^\},]*),([^\},]*)\}/$3/g;
-
-    # Un-escape <> at this point.
-    s/&LT;/</g;
-    s/&GT;/>/g;
-
-    # Now un-nest all B<>, I<>, R<>.  Theoretically we could have
-    # indefinitely deep nesting; in practice, one level suffices.
-    1 while s/([BIR])<([^<>]*)([BIR])<([^<>]*)>/$1<$2>$3<$4>$1</g;
-
-    # Replace R<...> with bare ...; eliminate empty markup, B<>;
-    # shift white space at the ends of [BI]<...> expressions outside
-    # the expression.
-    s/R<([^<>]*)>/$1/g;
-    s/[BI]<>//g;
-    s/([BI])<(\s+)([^>]+)>/$2$1<$3>/g;
-    s/([BI])<([^>]+?)(\s+)>/$1<$2>$3/g;
-
-    # Extract footnotes.  This has to be done after all other
-    # processing because otherwise the regexp will choke on formatting
-    # inside @footnote.
-    while (/\@footnote/g) {
-	s/\@footnote\{([^\}]+)\}/[$fnno]/;
-	add_footnote($1, $fnno);
-	$fnno++;
-    }
-
-    return $_;
-}
-
-sub unmunge
-{
-    # Replace escaped symbols with their equivalents.
-    local $_ = $_[0];
-
-    s/&lt;/E<lt>/g;
-    s/&gt;/E<gt>/g;
-    s/&lbrace;/\{/g;
-    s/&rbrace;/\}/g;
-    s/&at;/\@/g;
-    s/&amp;/&/g;
-    return $_;
-}
-
-sub add_footnote
-{
-    unless (exists $sects{FOOTNOTES}) {
-	$sects{FOOTNOTES} = "\n=over 4\n\n";
-    }
-
-    $sects{FOOTNOTES} .= "=item $fnno.\n\n"; $fnno++;
-    $sects{FOOTNOTES} .= $_[0];
-    $sects{FOOTNOTES} .= "\n\n";
-}
-
-# stolen from Symbol.pm
-{
-    my $genseq = 0;
-    sub gensym
-    {
-	my $name = "GEN" . $genseq++;
-	my $ref = \*{$name};
-	delete $::{$name};
-	return $ref;
-    }
-}
author	cvs2svn <>	2009-07-24 22:24:58 +0400
committer	cvs2svn <>	2009-07-24 22:24:58 +0400
commit	efc9ccf899dfa512653b783087f5fd5d5b67e8b9 (patch)
tree	816ff195801b14527cef77e2c99dde2bc293036a /etc
parent	92d816d492376876a0afee9b1a7e35efd85a94ea (diff)