Rename ms1 files to mt files (part 1 -- renames only)

1 files changed, 378 insertions, 0 deletions

diff --git a/libgloss/mt/startup-64-001.S b/libgloss/mt/startup-64-001.S
new file mode 100644
index 000000000..5ceb42b36
--- /dev/null
+++ b/libgloss/mt/startup-64-001.S
@@ -0,0 +1,378 @@
+/*
+ * $Header$
+ *
+ * interrupt_vectors.s -- the interrupt handler jump table. 
+ *
+ *
+ * There are a total of 32 interrupt vector possible, however, only
+ *   11 of those are currently used (the others are reserved). The
+ *   order of vectors is as follows:
+ *
+ *     1. Boot Vector. Vector for power-on/reset.
+ *     2. Software Vector. Vector for handling the SI instruction (an
+ *          explicit interrupt caused by software).
+ *     3. Break Vector. Vector for handling the Break instruction.
+ *     4. Device 0 Vector. Service vector for device zero. 
+ *     5. Device 1 Vector. Service vector for device one. 
+ *     6. Device 2 Vector. Service vector for device two. 
+ *     7. Device 3 Vector. Service vector for device three. 
+ *     8. Device 4 Vector. Service vector for device four. 
+ *     9. Device 5 Vector. Service vector for device five. 
+ *    10. Device 6 Vector. Service vector for device six. 
+ *    11. Device 7 Vector. Service vector for device seven. 
+ *
+ *   The rest of the interrupt vectors are reserved for future use.
+ *
+ *
+ * Each jump table entry consists of the following two instructions:
+ *
+ *   jmp Label		; Label as appropriate
+ *   nop 		; implemented as or r0,r0,r0
+ *
+ *   The following labels are reserved for the vectors named above,
+ *   respectively:
+ *
+ *     _BOOTIVEC, _SOFTIVEC, _BRKIVEC, _DEV0IVEC, _DEV1IVEC, _DEV2IVEC,
+ *     _DEV3IVEC, _DEV4IVEC, _DEV5IVEC, _DEV6IVEC, _DEV7IVEC
+ *
+ *
+ *   26Sep01 (DJK) The memory map is changed and the device interrupts are
+ *                   now memory-mapped.
+ *
+ *   10Oct01 (DJK) The memory map is finalized and the first 4K of address
+ *                   space is now reserved for memory-mapped I/O devices.
+ *                   (There is over 2K unused, reserved space in this area.)
+ *
+ *   27Jul02 (DJK) Fixed the address for the interrupt mask register. Old
+ *                   documentation stated the port address as 0x140, but
+ *                   the implementation uses 0x13c.
+ *
+ *   30Jul02 (DJK) Added support for printf. This only supports output to
+ *                   stderr and stdout. Using the message box interface,
+ *                   a (newly defined) message or series of messages is
+ *                   passed to the controller to output bytes as text to
+ *                   the debug console. These messages are constructed in
+ *                   the interrupt handler for the SI instruction.
+ *                   With this implementation, the user is unable to
+ *                   utilize the message box interface in applications as
+ *                   specialized interrupt handlers for the external
+ *                   interrupts are necessary.
+ *
+ *
+ *
+ * Copyright (c) 2001, 2002, 2003, 2004 Morpho Technologies, Inc.
+ *
+ */
+
+	.section .startup, "a", @progbits
+	.global __boot_start
+_INTERRUPT_VECTOR_TABLE:
+__boot_start:
+	jmp	_BOOTIVEC		; Boot vector
+	or	r0, r0, r0
+	jmp	_SOFTIVEC		; Vector for SI instruction
+	or	r0,r0,r0
+	jmp	_BRKIVEC		; Vector for Break instruction
+	or	r0,r0,r0
+
+
+	; This is the memory-mapped I/O region.
+
+	; Hardware Interrupt Registers
+	.org 0x100
+	.global _DEV0_INTERRUPT_REG
+_DEV0_INTERRUPT_REG:
+	.word 0x00000000
+
+	.global _DEV1_INTERRUPT_REG
+_DEV1_INTERRUPT_REG:
+	.word 0x00000000
+
+	.global _DEV2_INTERRUPT_REG
+_DEV2_INTERRUPT_REG:
+	.word 0x00000000
+
+	.global _DEV3_INTERRUPT_REG
+_DEV3_INTERRUPT_REG:
+	.word 0x00000000
+
+	.global _DEV4_INTERRUPT_REG
+_DEV4_INTERRUPT_REG:
+	.word 0x00000000
+
+	.global _DEV5_INTERRUPT_REG
+_DEV5_INTERRUPT_REG:
+	.word 0x00000000
+
+	.global _DEV6_INTERRUPT_REG
+_DEV6_INTERRUPT_REG:
+	.word 0x00000000
+
+	.global _DEV7_INTERRUPT_REG
+_DEV7_INTERRUPT_REG:
+	.word 0x00000000
+
+	; 60 bytes minus eight registers (four bytes per register)
+	.fill (60 - 8 * 4)
+
+	.global _INTERRUPT_MASK_REG
+_INTERRUPT_MASK_REG:
+	.word 0x00000000
+
+	; 256 bytes minus sixteen registers (four bytes per register)
+	.fill (256 - 16 * 4)
+
+
+
+	.org 0x200
+	; MorphoSys Decoder Registers
+	.global _MS_DEC_AUTO_INCREMENT_REG
+_MS_DEC_AUTO_INCREMENT_REG:
+	.word 0x00000000
+
+	.global _MS_DEC_SKIP_FACTOR_REG
+_MS_DEC_SKIP_FACTOR_REG:
+	.word 0x00000000
+
+	.global _MS_DEC_CUSTOM_PERMUTATION_REG
+_MS_DEC_CUSTOM_PERMUTATION_REG:
+	.word 0x00000000
+
+	.global _MS_DEC_CONTEXT_BASE_REG
+_MS_DEC_CONTEXT_BASE_REG:
+	.word 0x00000000
+
+	.global _MS_DEC_LOOKUP_TABLE_BASE_REG
+_MS_DEC_LOOKUP_TABLE_BASE_REG:
+	.word 0x00000000
+
+	.global _MS_CIRCULAR_BUFFER_END_REG
+_MS_CIRCULAR_BUFFER_END_REG:
+	.word (__FRAME_BUFFER_END)
+
+	.global _MS_CIRCULAR_BUFFER_SIZE_REG
+_MS_CIRCULAR_BUFFER_SIZE_REG:
+	.word __FRAME_BUFFER_SIZE
+
+	.global _MS_DATA_BLOCK_END_REG
+_MS_DATA_BLOCK_END_REG:
+	.word 0x00000000
+
+	.global _MS_DATA_BLOCK_SIZE_REG
+_MS_DATA_BLOCK_SIZE_REG:
+	.word 0x00000000
+
+	; 256 bytes minus nine registers (four bytes per register)
+	.fill (256 - 9 * 4)
+
+
+
+	.org 0x300
+	; Debug Registers
+	.global _DEBUG_HALT_REG
+_DEBUG_HALT_REG:
+	.word 0x00000000
+
+	.global _DEBUG_BREAK_REG
+_DEBUG_BREAK_REG:
+	.word 0x00000000
+
+	.global _DEBUG_HW_RESERVED0_REG
+_DEBUG_HW_RESERVED0_REG:
+	.word 0x00000000
+
+	.global _DEBUG_HW_RESERVED1_REG
+_DEBUG_HW_RESERVED1_REG:
+	.word 0x00000000
+
+	.global _DEBUG_HW_RESERVED2_REG
+_DEBUG_HW_RESERVED2_REG:
+	.word 0x00000000
+
+	.global _DEBUG_HW_RESERVED3_REG
+_DEBUG_HW_RESERVED3_REG:
+	.word 0x00000000
+
+	.global _DEBUG_HW_RESERVED4_REG
+_DEBUG_HW_RESERVED4_REG:
+	.word 0x00000000
+
+	.global _DEBUG_SW_SYSREQ_REG
+_DEBUG_SW_SYSREQ_REG:
+	.word 0x00000000
+
+	; 256 bytes minus eight registers (four bytes per register)
+	.fill (256 - 8 * 4)
+
+
+
+	.org 0x400
+	; Sequence Generator Registers
+_SEQ_GEN_REGS:
+	.fill 256
+
+
+
+	.org 0x500
+_RESERVED_SEQ_GEN_REGS:
+	.fill 256
+
+
+
+        .org 0x600
+        .global _TIMER0_VAL_REG
+_TIMER0_VAL_REG:
+        .word 0x00000000
+
+        .global _TIMER0_CTRL_REG
+_TIMER0_CTRL_REG:
+        .word 0x00000000
+
+        .global _TIMER1_VAL_REG
+_TIMER1_VAL_REG:
+        .word 0x00000000
+
+        .global _TIMER1_CTRL_REG
+_TIMER1_CTRL_REG:
+        .word 0x00000000
+
+        .global _TIMER2_VAL_REG
+_TIMER2_VAL_REG:
+        .word 0x00000000
+
+        .global _TIMER2_CTRL_REG
+_TIMER2_CTRL_REG:
+        .word 0x00000000
+
+	; 256 bytes minus six registers (four bytes per register)
+	.fill (256 - 6 * 4)
+
+
+
+	.org 0x700
+	.global _OUTPUT0_CONTROL
+_OUTPUT0_CONTROL:
+	.word 0x00000000
+
+	.global _OUTPUT1_CONTROL
+_OUTPUT1_CONTROL:
+	.word 0x00000000
+
+	.global _OUTPUT2_CONTROL
+_OUTPUT2_CONTROL:
+	.word 0x00000000
+
+	.global _OUTPUT3_CONTROL
+_OUTPUT3_CONTROL:
+	.word 0x00000000
+
+	.global _OUTPUT4_CONTROL
+_OUTPUT4_CONTROL:
+	.word 0x00000000
+
+	.global _OUTPUT5_CONTROL
+_OUTPUT5_CONTROL:
+	.word 0x00000000
+
+	.global _OUTPUT6_CONTROL
+_OUTPUT6_CONTROL:
+	.word 0x00000000
+
+	.global _OUTPUT7_CONTROL
+_OUTPUT7_CONTROL:
+	.word 0x00000000
+
+	; 256 bytes minus eight registers (four bytes per register)
+	.fill (256 - 8 * 4)
+
+
+
+	.org 0x800
+	; Reserved memory-mapped space.
+	.fill (0x1000 - 0x800)
+
+
+
+	.text
+
+	.equ SI_IOPORT_ADR, _DEBUG_SW_SYSREQ_REG
+	.equ SI_IOPORT_BIT, 0x1
+	.equ BRK_IOPORT_ADR, _DEBUG_BREAK_REG
+	.equ BRK_IOPORT_BIT, 0x1
+
+	.global _BOOTIVEC
+_BOOTIVEC:
+
+	; Initialize the interrupt controller's interrupt vector registers
+	; for devices zero through seven.
+	ldui    r1, #%hi16(_IVEC_DEFAULT)
+	ori     r1, r1, #%lo16(_IVEC_DEFAULT)
+	stw     r1, r0, #%lo16(_DEV0_INTERRUPT_REG)
+	stw     r1, r0, #%lo16(_DEV1_INTERRUPT_REG)
+	stw     r1, r0, #%lo16(_DEV2_INTERRUPT_REG)
+	stw     r1, r0, #%lo16(_DEV3_INTERRUPT_REG)
+	stw     r1, r0, #%lo16(_DEV4_INTERRUPT_REG)
+	stw     r1, r0, #%lo16(_DEV5_INTERRUPT_REG)
+	stw     r1, r0, #%lo16(_DEV6_INTERRUPT_REG)
+	stw     r1, r0, #%lo16(_DEV7_INTERRUPT_REG)
+
+	; Jump to the beginning of the application and enable interrupts.
+	jmp	_start
+	ei
+
+
+
+	; Handler for the SI instruction. To perform a system call, the
+	; C model uses a trapping mechanism which executes an SI instruction.
+	; The Morpho Technologies simulator simply performs a branch to
+	; this vector to simulate the SI instruction (this is as the hardware
+	; behaves). In order to trigger the simulator that a system call
+	; is needed, a write into the I/O register at address $40005 to
+	; set bit #2 (0x4) is necessary.
+	;
+	; The above address has been changed to 0x31C and the bit number
+	; is zero. (The manifest constants have been changed to reflect this.)
+	;
+	.global _SOFTIVEC
+_SOFTIVEC:
+	; Build a frame to save registers.
+	subi	sp, sp, #$8
+	stw	r9, sp, #$4
+	ldui	r9, #%hi16(SI_IOPORT_ADR)
+	stw	r10, sp, #$0
+	ori	r9, r9, #%lo16(SI_IOPORT_ADR)
+	ori	r10, r0, #SI_IOPORT_BIT
+	stw	r10, r9, #$0
+	; SYS_call is handled by simulator here...
+	or	r0, r0, r0
+	ldw	r10, sp, #$0
+	or	r0, r0, r0
+	ldw	r9, sp, #$4
+	reti	r14
+	addi	sp, sp, #$8
+
+
+
+	.global _BRKIVEC
+_BRKIVEC:
+	; Build a frame to save registers.
+	subi	sp, sp, #$8
+	stw	r9, sp, #$4
+	ldui	r9, #%hi16(BRK_IOPORT_ADR)
+	stw	r10, sp, #$0
+	ori	r9, r9, #%lo16(BRK_IOPORT_ADR)
+	ori	r10, r0, #BRK_IOPORT_BIT
+	stw	r10, r9, #$0
+	or	r0, r0, r0
+	ldw	r10, sp, #$0
+	subi	r15, r15, #$4		; Backup to address of break
+	ldw	r9, sp, #$4
+	reti	r15
+	addi	sp, sp, #$8
+
+
+
+	.global _IVEC_DEFAULT
+_IVEC_DEFAULT:
+	reti	r15
+	or	r0, r0, r0