import newlib-2000-02-17 snapshot

19 files changed, 4952 insertions, 0 deletions

diff --git a/newlib/libc/machine/hppa/DEFS.h b/newlib/libc/machine/hppa/DEFS.h
new file mode 100644
index 000000000..9c0aa1e06
--- /dev/null
+++ b/newlib/libc/machine/hppa/DEFS.h
@@ -0,0 +1,160 @@
+/*
+ * Copyright (c) 1990 The Regents of the University of California.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms are permitted
+ * provided that the above copyright notice and this paragraph are
+ * duplicated in all such forms and that any documentation,
+ * advertising materials, and other materials related to such
+ * distribution and use acknowledge that the software was developed
+ * by the University of California, Berkeley.  The name of the
+ * University may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#include "pcc_prefix.s"
+
+#define	BLANK
+#define	BANNER(str)	BLANK	.VERSION str
+#define	ENTRY(Name)	BLANK	M_ENTRY	(Name,PROF_/**/Name)
+#define	ENTRYC(Name)	BLANK	M_ENTRYC(Name,PROF_/**/Name)
+#define	EXIT(Name)	BLANK	M_EXIT	(Name,PROF_/**/Name)
+#define	EXITC(Name)	BLANK	M_EXITC	(Name,PROF_/**/Name)
+
+#ifdef PROF
+
+;
+; All four argument registers are saved into caller save registers
+; and restored after the call to _mcount.  This is possible because
+; the mcount routine does not modify them, so we can.  Mcount takes
+; 3 arguments; the first argument is the incoming 'rp', the second
+; is the starting address of the profiled routine, and the third is
+; the address of the PROF label (which is where mcount stores the
+; profile data).
+;
+#define M_ENTRY(name,prof)	\
+	.SPACE	$TEXT$		!\
+	.SUBSPA	$CODE$		!\
+        .label name		!\
+        .PROC			!\
+	.CALLINFO CALLER,SAVE_RP !\
+	.ENTRY			!\
+	stw	rp,-20(sp)	!\
+	ldo	48(sp),sp	!\
+	or	arg0,r0,r19	!\
+	or	arg1,r0,r20	!\
+	or	arg2,r0,r21	!\
+	or	arg3,r0,r22	!\
+	or	rp,r0,arg0	!\
+	ldil	L%name,r1	!\
+	ldo	R%name(r1),arg1	!\
+	addil	L%prof-$global$,dp	!\
+	bl	_mcount,rp	!\
+	ldo	R%prof-$global$(r1),arg2	!\
+	ldw	-68(sp),rp	!\
+	ldo	-48(sp),sp	!\
+	or	r19,r0,arg0	!\
+	or	r20,r0,arg1	!\
+	or	r21,r0,arg2	!\
+	or	r22,r0,arg3	!\
+
+
+#define M_ENTRYC(name,prof)	\
+	.SPACE	$TEXT$		!\
+	.SUBSPA	$CODE$		!\
+        .label name		!\
+        .PROC			!\
+	.CALLINFO CALLER,SAVE_RP !\
+	.ENTRY			!\
+	stw	rp,-20(sp)	!\
+	ldo	128(sp),sp	!\
+	or	arg0,r0,r19	!\
+	or	arg1,r0,r20	!\
+	or	arg2,r0,r21	!\
+	or	arg3,r0,r22	!\
+	or	rp,r0,arg0	!\
+	ldil	L%name,r1	!\
+	ldo	R%name(r1),arg1	!\
+	addil	L%prof-$global$,dp	!\
+	bl	_mcount,rp	!\
+	ldo	R%prof-$global$(r1),arg2	!\
+	ldw	-148(sp),rp	!\
+	or	r19,r0,arg0	!\
+	or	r20,r0,arg1	!\
+	or	r21,r0,arg2	!\
+	or	r22,r0,arg3	!\
+
+;
+; The HPUX profiler uses a word for each entrypoint to store the profiling
+; information.  The setup code passes the address to the _mcount routine.
+; The EXIT macro defines a label (PROF_foo), and a word of storage.
+;
+#define M_EXIT(name,prof)	\
+        bv,n	r0(rp)		!\
+	.EXIT			!\
+        .PROCEND		!\
+        .EXPORT	name,ENTRY	!\
+	.SPACE	$PRIVATE$	!\
+	.SUBSPA	$DATA$		!\
+	.label prof		!\
+	.WORD	0		!\
+	.IMPORT	$global$,DATA	!\
+	.IMPORT	_mcount,CODE
+
+#define M_EXITC(name,prof)	\
+        bv	r0(rp)		!\
+        ldo	-128(sp),sp	!\
+	.EXIT			!\
+        .PROCEND		!\
+        .EXPORT	name,ENTRY	!\
+	.SPACE	$PRIVATE$	!\
+	.SUBSPA	$DATA$		!\
+	.label prof		!\
+	.WORD	0		!\
+	.IMPORT	$global$,DATA	!\
+	.IMPORT	_mcount,CODE
+
+#else	/* NOT profiling */
+
+#define M_ENTRY(name,prof)	\
+        .SPACE $TEXT$	!\
+        .SUBSPA $CODE$	!\
+        .label name	!\
+        .PROC		!\
+        .CALLINFO	!\
+	.ENTRY
+
+#define M_ENTRYC(name,prof)	\
+        .SPACE	$TEXT$	!\
+        .SUBSPA	$CODE$	!\
+        .label name	!\
+        .PROC		!\
+        .CALLINFO CALLER,SAVE_RP	!\
+	.ENTRY		!\
+        stw     rp,-20(sp)	!\
+        ldo     128(sp),sp
+
+#define M_EXIT(name,prof)	\
+        bv,n	r0(rp)	!\
+	.EXIT		!\
+        .PROCEND	!\
+        .EXPORT	name,ENTRY
+
+#define M_EXITC(name,prof)	\
+        ldw	-148(sp),rp	!\
+        bv	r0(rp)	!\
+        ldo	-128(sp),sp	!\
+	.EXIT		!\
+        .PROCEND	!\
+        .EXPORT	name,ENTRY
+
+#define	ENTRY(Name)	BLANK	M_ENTRY	(Name,PROF_/**/Name)
+#define	ENTRYC(Name)	BLANK	M_ENTRYC(Name,PROF_/**/Name)
+#define	EXIT(Name)	BLANK	M_EXIT	(Name,PROF_/**/Name)
+#define	EXITC(Name)	BLANK	M_EXITC	(Name,PROF_/**/Name)
+
+
+#endif
diff --git a/newlib/libc/machine/hppa/Makefile.am b/newlib/libc/machine/hppa/Makefile.am
new file mode 100644
index 000000000..413cd722a
--- /dev/null
+++ b/newlib/libc/machine/hppa/Makefile.am
@@ -0,0 +1,14 @@
+## Process this file with automake to generate Makefile.in
+
+AUTOMAKE_OPTIONS = cygnus
+
+INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
+
+noinst_LIBRARIES = lib.a
+
+lib_a_SOURCES = \
+	memchr.S memcmp.S memcpy.S memset.S setjmp.S strcat.S strcmp.S \
+	strcpy.S strlen.S strncat.S strncmp.S strncpy.S
+
+ACLOCAL_AMFLAGS = -I ../../..
+CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/machine/hppa/Makefile.in b/newlib/libc/machine/hppa/Makefile.in
new file mode 100644
index 000000000..7fa027195
--- /dev/null
+++ b/newlib/libc/machine/hppa/Makefile.in
@@ -0,0 +1,300 @@
+# Makefile.in generated automatically by automake 1.3 from Makefile.am
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DISTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = .
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_alias = @host_alias@
+host_triplet = @host@
+AR = @AR@
+AS = @AS@
+CC = @CC@
+CPP = @CPP@
+EXEEXT = @EXEEXT@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+VERSION = @VERSION@
+machine_dir = @machine_dir@
+newlib_basedir = @newlib_basedir@
+sys_dir = @sys_dir@
+
+AUTOMAKE_OPTIONS = cygnus
+
+INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
+
+noinst_LIBRARIES = lib.a
+
+lib_a_SOURCES = \
+	memchr.S memcmp.S memcpy.S memset.S setjmp.S strcat.S strcmp.S \
+	strcpy.S strlen.S strncat.S strncmp.S strncpy.S
+
+ACLOCAL_AMFLAGS = -I ../../..
+CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
+CONFIG_CLEAN_FILES = 
+LIBRARIES =  $(noinst_LIBRARIES)
+
+
+DEFS = @DEFS@ -I. -I$(srcdir) 
+CPPFLAGS = @CPPFLAGS@
+LDFLAGS = @LDFLAGS@
+LIBS = @LIBS@
+lib_a_LIBADD = 
+lib_a_OBJECTS =  memchr.o memcmp.o memcpy.o memset.o setjmp.o strcat.o \
+strcmp.o strcpy.o strlen.o strncat.o strncmp.o strncpy.o
+CFLAGS = @CFLAGS@
+COMPILE = $(CC) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)
+LINK = $(CC) $(CFLAGS) $(LDFLAGS) -o $@
+DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = tar
+GZIP = --best
+SOURCES = $(lib_a_SOURCES)
+OBJECTS = $(lib_a_OBJECTS)
+
+all: Makefile $(LIBRARIES)
+
+.SUFFIXES:
+.SUFFIXES: .S .c .o .s
+$(srcdir)/Makefile.in: @MAINT@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) \
+	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+$(ACLOCAL_M4): @MAINT@ configure.in  ../../../acinclude.m4 \
+		../../../aclocal.m4
+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+
+config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+$(srcdir)/configure: @MAINT@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+	cd $(srcdir) && $(AUTOCONF)
+
+mostlyclean-noinstLIBRARIES:
+
+clean-noinstLIBRARIES:
+	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
+
+distclean-noinstLIBRARIES:
+
+maintainer-clean-noinstLIBRARIES:
+
+.c.o:
+	$(COMPILE) -c $<
+
+.s.o:
+	$(COMPILE) -c $<
+
+.S.o:
+	$(COMPILE) -c $<
+
+mostlyclean-compile:
+	-rm -f *.o core *.core
+
+clean-compile:
+
+distclean-compile:
+	-rm -f *.tab.c
+
+maintainer-clean-compile:
+
+lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
+	-rm -f lib.a
+	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
+	$(RANLIB) lib.a
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP)
+	here=`pwd` && cd $(srcdir) \
+	  && mkid -f$$here/ID $(SOURCES) $(HEADERS) $(LISP)
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+	-rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	-rm -rf $(distdir)
+	GZIP=$(GZIP) $(TAR) zxf $(distdir).tar.gz
+	mkdir $(distdir)/=build
+	mkdir $(distdir)/=inst
+	dc_install_base=`cd $(distdir)/=inst && pwd`; \
+	cd $(distdir)/=build \
+	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist
+	-rm -rf $(distdir)
+	@echo "========================"; \
+	echo "$(distdir).tar.gz is ready for distribution"; \
+	echo "========================"
+dist: distdir
+	-chmod -R a+r $(distdir)
+	GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	-rm -rf $(distdir)
+dist-all: distdir
+	-chmod -R a+r $(distdir)
+	GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	-rm -rf $(distdir)
+distdir: $(DISTFILES)
+	-rm -rf $(distdir)
+	mkdir $(distdir)
+	-chmod 777 $(distdir)
+	@for file in $(DISTFILES); do \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  test -f $(distdir)/$$file \
+	  || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	  || cp -p $$d/$$file $(distdir)/$$file; \
+	done
+info:
+dvi:
+check:
+	$(MAKE) $(AM_MAKEFLAGS)
+installcheck:
+install-info:
+install-exec: 
+	@$(NORMAL_INSTALL)
+
+install-data: 
+	@$(NORMAL_INSTALL)
+
+install: install-exec install-data all
+	@:
+
+uninstall: 
+
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install
+installdirs:
+
+
+mostlyclean-generic:
+	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-rm -f Makefile $(DISTCLEANFILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+mostlyclean:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
+		mostlyclean-tags mostlyclean-generic
+
+clean:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
+		mostlyclean
+
+distclean:  distclean-noinstLIBRARIES distclean-compile distclean-tags \
+		distclean-generic clean
+	-rm -f config.status
+
+maintainer-clean:  maintainer-clean-noinstLIBRARIES \
+		maintainer-clean-compile maintainer-clean-tags \
+		maintainer-clean-generic distclean
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+	-rm -f config.status
+
+.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
+clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
+mostlyclean-compile distclean-compile clean-compile \
+maintainer-clean-compile tags mostlyclean-tags distclean-tags \
+clean-tags maintainer-clean-tags distdir info dvi installcheck \
+install-info install-exec install-data install uninstall all \
+installdirs mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/newlib/libc/machine/hppa/aclocal.m4 b/newlib/libc/machine/hppa/aclocal.m4
new file mode 100644
index 000000000..70d481020
--- /dev/null
+++ b/newlib/libc/machine/hppa/aclocal.m4
@@ -0,0 +1,282 @@
+dnl aclocal.m4 generated automatically by aclocal 1.4
+
+dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+dnl PARTICULAR PURPOSE.
+
+dnl This provides configure definitions used by all the newlib
+dnl configure.in files.
+
+dnl Basic newlib configury.  This calls basic introductory stuff,
+dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
+dnl configure.host.  The only argument is the relative path to the top
+dnl newlib directory.
+
+AC_DEFUN(NEWLIB_CONFIGURE,
+[
+dnl Default to --enable-multilib
+AC_ARG_ENABLE(multilib,
+[  --enable-multilib         build many library versions (default)],
+[case "${enableval}" in
+  yes) multilib=yes ;;
+  no)  multilib=no ;;
+  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
+ esac], [multilib=yes])dnl
+
+dnl Support --enable-target-optspace
+AC_ARG_ENABLE(target-optspace,
+[  --enable-target-optspace  optimize for space],
+[case "${enableval}" in
+  yes) target_optspace=yes ;;
+  no)  target_optspace=no ;;
+  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
+ esac], [target_optspace=])dnl
+
+dnl Support --enable-newlib-mb
+AC_ARG_ENABLE(newlib-mb,
+[  --enable-newlib-mb        enable multibyte support],
+[case "${enableval}" in
+  yes) newlib_mb=yes ;;
+  no)  newlib_mb=no ;;
+  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
+ esac], [newlib_mb=no])dnl
+
+dnl We may get other options which we don't document:
+dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
+
+test -z "[$]{with_target_subdir}" && with_target_subdir=.
+
+if test "[$]{srcdir}" = "."; then
+  if test "[$]{with_target_subdir}" != "."; then
+    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
+  else
+    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
+  fi
+else
+  newlib_basedir="[$]{srcdir}/$1"
+fi
+AC_SUBST(newlib_basedir)
+
+AC_CANONICAL_HOST
+
+AM_INIT_AUTOMAKE(newlib, 1.8.1)
+
+# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
+# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
+# are probably using a cross compiler, which will not be able to fully
+# link an executable.  This should really be fixed in autoconf
+# itself.
+
+AC_DEFUN(LIB_AC_PROG_CC,
+[AC_BEFORE([$0], [AC_PROG_CPP])dnl
+AC_CHECK_PROG(CC, gcc, gcc)
+if test -z "$CC"; then
+  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
+  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
+fi
+
+AC_PROG_CC_GNU
+
+if test $ac_cv_prog_gcc = yes; then
+  GCC=yes
+dnl Check whether -g works, even if CFLAGS is set, in case the package
+dnl plays around with CFLAGS (such as to build both debugging and
+dnl normal versions of a library), tasteless as that idea is.
+  ac_test_CFLAGS="${CFLAGS+set}"
+  ac_save_CFLAGS="$CFLAGS"
+  CFLAGS=
+  AC_PROG_CC_G
+  if test "$ac_test_CFLAGS" = set; then
+    CFLAGS="$ac_save_CFLAGS"
+  elif test $ac_cv_prog_cc_g = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-O2"
+  fi
+else
+  GCC=
+  test "${CFLAGS+set}" = set || CFLAGS="-g"
+fi
+])
+
+LIB_AC_PROG_CC
+
+# AC_CHECK_TOOL does AC_REQUIRE (AC_CANONICAL_BUILD).  If we don't
+# run it explicitly here, it will be run implicitly before
+# NEWLIB_CONFIGURE, which doesn't work because that means that it will
+# be run before AC_CANONICAL_HOST.
+AC_CANONICAL_BUILD
+
+AC_CHECK_TOOL(AS, as)
+AC_CHECK_TOOL(AR, ar)
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+
+AC_PROG_INSTALL
+
+AM_MAINTAINER_MODE
+
+# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
+# at least currently, we never actually build a program, so we never
+# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
+# fails, because we are probably configuring with a cross compiler
+# which can't create executables.  So we include AC_EXEEXT to keep
+# automake happy, but we don't execute it, since we don't care about
+# the result.
+if false; then
+  AC_EXEEXT
+fi
+
+. [$]{newlib_basedir}/configure.host
+
+case [$]{newlib_basedir} in
+/* | [A-Za-z]:[/\\]*) newlib_flagbasedir=[$]{newlib_basedir} ;;
+*) newlib_flagbasedir='[$](top_builddir)/'[$]{newlib_basedir} ;;
+esac
+
+newlib_cflags="[$]{newlib_cflags} -I"'[$](top_builddir)'"/$1/targ-include -I[$]{newlib_flagbasedir}/libc/include"
+case "${host}" in
+  *-*-cygwin*)
+    newlib_cflags="[$]{newlib_cflags} -I[$]{newlib_flagbasedir}/../winsup/cygwin/include  -I[$]{newlib_flagbasedir}/../winsup/w32api/include"
+    ;;
+esac
+
+newlib_cflags="[$]{newlib_cflags} -fno-builtin"
+
+NEWLIB_CFLAGS=${newlib_cflags}
+AC_SUBST(NEWLIB_CFLAGS)
+
+AC_SUBST(machine_dir)
+AC_SUBST(sys_dir)
+])
+
+# Do all the work for Automake.  This macro actually does too much --
+# some checks are only needed if your package does certain things.
+# But this isn't really a big deal.
+
+# serial 1
+
+dnl Usage:
+dnl AM_INIT_AUTOMAKE(package,version, [no-define])
+
+AC_DEFUN(AM_INIT_AUTOMAKE,
+[AC_REQUIRE([AC_PROG_INSTALL])
+PACKAGE=[$1]
+AC_SUBST(PACKAGE)
+VERSION=[$2]
+AC_SUBST(VERSION)
+dnl test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+fi
+ifelse([$3],,
+AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
+AC_REQUIRE([AM_SANITY_CHECK])
+AC_REQUIRE([AC_ARG_PROGRAM])
+dnl FIXME This is truly gross.
+missing_dir=`cd $ac_aux_dir && pwd`
+AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
+AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
+AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
+AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
+AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
+AC_REQUIRE([AC_PROG_MAKE_SET])])
+
+#
+# Check to make sure that the build environment is sane.
+#
+
+AC_DEFUN(AM_SANITY_CHECK,
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftestfile
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+   if test "[$]*" = "X"; then
+      # -L didn't work.
+      set X `ls -t $srcdir/configure conftestfile`
+   fi
+   if test "[$]*" != "X $srcdir/configure conftestfile" \
+      && test "[$]*" != "X conftestfile $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+alias in your environment])
+   fi
+
+   test "[$]2" = conftestfile
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+rm -f conftest*
+AC_MSG_RESULT(yes)])
+
+dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
+dnl The program must properly implement --version.
+AC_DEFUN(AM_MISSING_PROG,
+[AC_MSG_CHECKING(for working $2)
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if ($2 --version) < /dev/null > /dev/null 2>&1; then
+   $1=$2
+   AC_MSG_RESULT(found)
+else
+   $1="$3/missing $2"
+   AC_MSG_RESULT(missing)
+fi
+AC_SUBST($1)])
+
+# Add --enable-maintainer-mode option to configure.
+# From Jim Meyering
+
+# serial 1
+
+AC_DEFUN(AM_MAINTAINER_MODE,
+[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
+  dnl maintainer-mode is disabled by default
+  AC_ARG_ENABLE(maintainer-mode,
+[  --enable-maintainer-mode enable make rules and dependencies not useful
+                          (and sometimes confusing) to the casual installer],
+      USE_MAINTAINER_MODE=$enableval,
+      USE_MAINTAINER_MODE=no)
+  AC_MSG_RESULT($USE_MAINTAINER_MODE)
+  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
+  MAINT=$MAINTAINER_MODE_TRUE
+  AC_SUBST(MAINT)dnl
+]
+)
+
+# Define a conditional.
+
+AC_DEFUN(AM_CONDITIONAL,
+[AC_SUBST($1_TRUE)
+AC_SUBST($1_FALSE)
+if $2; then
+  $1_TRUE=
+  $1_FALSE='#'
+else
+  $1_TRUE='#'
+  $1_FALSE=
+fi])
+
diff --git a/newlib/libc/machine/hppa/configure b/newlib/libc/machine/hppa/configure
new file mode 100755
index 000000000..5377ef3aa
--- /dev/null
+++ b/newlib/libc/machine/hppa/configure
@@ -0,0 +1,1687 @@
+#! /bin/sh
+
+# Guess values for system-dependent variables and create Makefiles.
+# Generated automatically using autoconf version 2.13 
+# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+
+# Defaults:
+ac_help=
+ac_default_prefix=/usr/local
+# Any additions from configure.in:
+ac_help="$ac_help
+  --enable-multilib         build many library versions (default)"
+ac_help="$ac_help
+  --enable-target-optspace  optimize for space"
+ac_help="$ac_help
+  --enable-newlib-mb        enable multibyte support"
+ac_help="$ac_help
+  --enable-maintainer-mode enable make rules and dependencies not useful
+                          (and sometimes confusing) to the casual installer"
+
+# Initialize some variables set by options.
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+build=NONE
+cache_file=./config.cache
+exec_prefix=NONE
+host=NONE
+no_create=
+nonopt=NONE
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+sitefile=
+srcdir=
+target=NONE
+verbose=
+x_includes=NONE
+x_libraries=NONE
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+# Initialize some other variables.
+subdirs=
+MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+# Maximum number of lines to put in a shell here document.
+ac_max_here_lines=12
+
+ac_prev=
+for ac_option
+do
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval "$ac_prev=\$ac_option"
+    ac_prev=
+    continue
+  fi
+
+  case "$ac_option" in
+  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) ac_optarg= ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case "$ac_option" in
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir="$ac_optarg" ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build="$ac_optarg" ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file="$ac_optarg" ;;
+
+  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+  | --da=*)
+    datadir="$ac_optarg" ;;
+
+  -disable-* | --disable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    eval "enable_${ac_feature}=no" ;;
+
+  -enable-* | --enable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "enable_${ac_feature}='$ac_optarg'" ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix="$ac_optarg" ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he)
+    # Omit some internal or obsolete options to make the list less imposing.
+    # This message is too long to be a string in the A/UX 3.1 sh.
+    cat << EOF
+Usage: configure [options] [host]
+Options: [defaults in brackets after descriptions]
+Configuration:
+  --cache-file=FILE       cache test results in FILE
+  --help                  print this message
+  --no-create             do not create output files
+  --quiet, --silent       do not print \`checking...' messages
+  --site-file=FILE        use FILE as the site file
+  --version               print the version of autoconf that created configure
+Directory and file names:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [same as prefix]
+  --bindir=DIR            user executables in DIR [EPREFIX/bin]
+  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
+  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
+  --datadir=DIR           read-only architecture-independent data in DIR
+                          [PREFIX/share]
+  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
+                          [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
+  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
+  --includedir=DIR        C header files in DIR [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
+  --infodir=DIR           info documentation in DIR [PREFIX/info]
+  --mandir=DIR            man documentation in DIR [PREFIX/man]
+  --srcdir=DIR            find the sources in DIR [configure dir or ..]
+  --program-prefix=PREFIX prepend PREFIX to installed program names
+  --program-suffix=SUFFIX append SUFFIX to installed program names
+  --program-transform-name=PROGRAM
+                          run sed PROGRAM on installed program names
+EOF
+    cat << EOF
+Host type:
+  --build=BUILD           configure for building on BUILD [BUILD=HOST]
+  --host=HOST             configure for HOST [guessed]
+  --target=TARGET         configure for TARGET [TARGET=HOST]
+Features and packages:
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --x-includes=DIR        X include files are in DIR
+  --x-libraries=DIR       X library files are in DIR
+EOF
+    if test -n "$ac_help"; then
+      echo "--enable and --with options recognized:$ac_help"
+    fi
+    exit 0 ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host="$ac_optarg" ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir="$ac_optarg" ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir="$ac_optarg" ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir="$ac_optarg" ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir="$ac_optarg" ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst \
+  | --locals | --local | --loca | --loc | --lo)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+    localstatedir="$ac_optarg" ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir="$ac_optarg" ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir="$ac_optarg" ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix="$ac_optarg" ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix="$ac_optarg" ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix="$ac_optarg" ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name="$ac_optarg" ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir="$ac_optarg" ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir="$ac_optarg" ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site="$ac_optarg" ;;
+
+  -site-file | --site-file | --site-fil | --site-fi | --site-f)
+    ac_prev=sitefile ;;
+  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
+    sitefile="$ac_optarg" ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir="$ac_optarg" ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir="$ac_optarg" ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target="$ac_optarg" ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers)
+    echo "configure generated by autoconf version 2.13"
+    exit 0 ;;
+
+  -with-* | --with-*)
+    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "with_${ac_package}='$ac_optarg'" ;;
+
+  -without-* | --without-*)
+    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    eval "with_${ac_package}=no" ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes="$ac_optarg" ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries="$ac_optarg" ;;
+
+  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+    ;;
+
+  *)
+    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
+      echo "configure: warning: $ac_option: invalid host type" 1>&2
+    fi
+    if test "x$nonopt" != xNONE; then
+      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
+    fi
+    nonopt="$ac_option"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
+fi
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 6 checking for... messages and results
+# 5 compiler messages saved in config.log
+if test "$silent" = yes; then
+  exec 6>/dev/null
+else
+  exec 6>&1
+fi
+exec 5>./config.log
+
+echo "\
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+" 1>&5
+
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Also quote any args containing shell metacharacters.
+ac_configure_args=
+for ac_arg
+do
+  case "$ac_arg" in
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c) ;;
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+  esac
+done
+
+# NLS nuisances.
+# Only set these to C if already set.  These must not be set unconditionally
+# because not all systems understand e.g. LANG=C (notably SCO).
+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+# Non-C LC_CTYPE values break the ctype check.
+if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo > confdefs.h
+
+# A filename unique to this package, relative to the directory that
+# configure is in, which we can look for to find out if srcdir is correct.
+ac_unique_file=memchr.S
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then its parent.
+  ac_prog=$0
+  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+  srcdir=$ac_confdir
+  if test ! -r $srcdir/$ac_unique_file; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+  if test "$ac_srcdir_defaulted" = yes; then
+    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+  else
+    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+  fi
+fi
+srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$sitefile"; then
+  if test -z "$CONFIG_SITE"; then
+    if test "x$prefix" != xNONE; then
+      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+    else
+      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+    fi
+  fi
+else
+  CONFIG_SITE="$sitefile"
+fi
+for ac_site_file in $CONFIG_SITE; do
+  if test -r "$ac_site_file"; then
+    echo "loading site script $ac_site_file"
+    . "$ac_site_file"
+  fi
+done
+
+if test -r "$cache_file"; then
+  echo "loading cache $cache_file"
+  . $cache_file
+else
+  echo "creating cache $cache_file"
+  > $cache_file
+fi
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+ac_exeext=
+ac_objext=o
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+    ac_n= ac_c='
+' ac_t='	'
+  else
+    ac_n=-n ac_c= ac_t=
+  fi
+else
+  ac_n= ac_c='\c' ac_t=
+fi
+
+
+
+ac_aux_dir=
+for ac_dir in ../../../.. $srcdir/../../../..; do
+  if test -f $ac_dir/install-sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f $ac_dir/install.sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:578: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
+  for ac_dir in $PATH; do
+    # Account for people who put trailing slashes in PATH elements.
+    case "$ac_dir/" in
+    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+    *)
+      # OSF1 and SCO ODT 3.0 have their own names for install.
+      # Don't use installbsd from OSF since it installs stuff as root
+      # by default.
+      for ac_prog in ginstall scoinst install; do
+        if test -f $ac_dir/$ac_prog; then
+	  if test $ac_prog = install &&
+            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  else
+	    ac_cv_path_install="$ac_dir/$ac_prog -c"
+	    break 2
+	  fi
+	fi
+      done
+      ;;
+    esac
+  done
+  IFS="$ac_save_IFS"
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL="$ac_cv_path_install"
+  else
+    # As a last resort, use the slow shell script.  We don't cache a
+    # path for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the path is relative.
+    INSTALL="$ac_install_sh"
+  fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
+echo "configure:631: checking whether build environment is sane" >&5
+# Just in case
+sleep 1
+echo timestamp > conftestfile
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+   if test "$*" = "X"; then
+      # -L didn't work.
+      set X `ls -t $srcdir/configure conftestfile`
+   fi
+   if test "$*" != "X $srcdir/configure conftestfile" \
+      && test "$*" != "X conftestfile $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" 1>&2; exit 1; }
+   fi
+
+   test "$2" = conftestfile
+   )
+then
+   # Ok.
+   :
+else
+   { echo "configure: error: newly created file is older than distributed files!
+Check your system clock" 1>&2; exit 1; }
+fi
+rm -f conftest*
+echo "$ac_t""yes" 1>&6
+if test "$program_transform_name" = s,x,x,; then
+  program_transform_name=
+else
+  # Double any \ or $.  echo might interpret backslashes.
+  cat <<\EOF_SED > conftestsed
+s,\\,\\\\,g; s,\$,$$,g
+EOF_SED
+  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
+  rm -f conftestsed
+fi
+test "$program_prefix" != NONE &&
+  program_transform_name="s,^,${program_prefix},; $program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
+
+# sed with no file args requires a program.
+test "$program_transform_name" = "" && program_transform_name="s,x,x,"
+
+echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
+echo "configure:688: checking whether ${MAKE-make} sets \${MAKE}" >&5
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftestmake <<\EOF
+all:
+	@echo 'ac_maketemp="${MAKE}"'
+EOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+  eval ac_cv_prog_make_${ac_make}_set=yes
+else
+  eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftestmake
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  SET_MAKE=
+else
+  echo "$ac_t""no" 1>&6
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+if test $host != $build; then
+  ac_tool_prefix=${host_alias}-
+else
+  ac_tool_prefix=
+fi
+
+echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
+echo "configure:721: checking for Cygwin environment" >&5
+if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 726 "configure"
+#include "confdefs.h"
+
+int main() {
+
+#ifndef __CYGWIN__
+#define __CYGWIN__ __CYGWIN32__
+#endif
+return __CYGWIN__;
+; return 0; }
+EOF
+if { (eval echo configure:737: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv_cygwin=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_cygwin=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_cygwin" 1>&6
+CYGWIN=
+test "$ac_cv_cygwin" = yes && CYGWIN=yes
+echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
+echo "configure:754: checking for mingw32 environment" >&5
+if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 759 "configure"
+#include "confdefs.h"
+
+int main() {
+return __MINGW32__;
+; return 0; }
+EOF
+if { (eval echo configure:766: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv_mingw32=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_mingw32=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_mingw32" 1>&6
+MINGW32=
+test "$ac_cv_mingw32" = yes && MINGW32=yes
+
+# Check whether --enable-multilib or --disable-multilib was given.
+if test "${enable_multilib+set}" = set; then
+  enableval="$enable_multilib"
+  case "${enableval}" in
+  yes) multilib=yes ;;
+  no)  multilib=no ;;
+  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
+ esac
+else
+  multilib=yes
+fi
+
+# Check whether --enable-target-optspace or --disable-target-optspace was given.
+if test "${enable_target_optspace+set}" = set; then
+  enableval="$enable_target_optspace"
+  case "${enableval}" in
+  yes) target_optspace=yes ;;
+  no)  target_optspace=no ;;
+  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
+ esac
+else
+  target_optspace=
+fi
+
+# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
+if test "${enable_newlib_mb+set}" = set; then
+  enableval="$enable_newlib_mb"
+  case "${enableval}" in
+  yes) newlib_mb=yes ;;
+  no)  newlib_mb=no ;;
+  *)   { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
+ esac
+else
+  newlib_mb=no
+fi
+
+
+test -z "${with_target_subdir}" && with_target_subdir=.
+
+if test "${srcdir}" = "."; then
+  if test "${with_target_subdir}" != "."; then
+    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
+  else
+    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
+  fi
+else
+  newlib_basedir="${srcdir}/../../.."
+fi
+
+
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:840: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+  case $nonopt in
+  NONE)
+    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+    fi ;;
+  *) host_alias=$nonopt ;;
+  esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+
+
+PACKAGE=newlib
+
+VERSION=1.8.1
+
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
+fi
+cat >> confdefs.h <<EOF
+#define PACKAGE "$PACKAGE"
+EOF
+
+cat >> confdefs.h <<EOF
+#define VERSION "$VERSION"
+EOF
+
+
+
+missing_dir=`cd $ac_aux_dir && pwd`
+echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
+echo "configure:881: checking for working aclocal" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (aclocal --version) < /dev/null > /dev/null 2>&1; then
+   ACLOCAL=aclocal
+   echo "$ac_t""found" 1>&6
+else
+   ACLOCAL="$missing_dir/missing aclocal"
+   echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
+echo "configure:894: checking for working autoconf" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (autoconf --version) < /dev/null > /dev/null 2>&1; then
+   AUTOCONF=autoconf
+   echo "$ac_t""found" 1>&6
+else
+   AUTOCONF="$missing_dir/missing autoconf"
+   echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working automake""... $ac_c" 1>&6
+echo "configure:907: checking for working automake" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (automake --version) < /dev/null > /dev/null 2>&1; then
+   AUTOMAKE=automake
+   echo "$ac_t""found" 1>&6
+else
+   AUTOMAKE="$missing_dir/missing automake"
+   echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
+echo "configure:920: checking for working autoheader" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (autoheader --version) < /dev/null > /dev/null 2>&1; then
+   AUTOHEADER=autoheader
+   echo "$ac_t""found" 1>&6
+else
+   AUTOHEADER="$missing_dir/missing autoheader"
+   echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
+echo "configure:933: checking for working makeinfo" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
+   MAKEINFO=makeinfo
+   echo "$ac_t""found" 1>&6
+else
+   MAKEINFO="$missing_dir/missing makeinfo"
+   echo "$ac_t""missing" 1>&6
+fi
+
+
+
+# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
+# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
+# are probably using a cross compiler, which will not be able to fully
+# link an executable.  This should really be fixed in autoconf
+# itself.
+
+
+
+# Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:958: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_CC="gcc"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+  echo "$ac_t""$CC" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:988: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_prog_rejected=no
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
+        ac_prog_rejected=yes
+	continue
+      fi
+      ac_cv_prog_CC="cc"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# -gt 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    set dummy "$ac_dir/$ac_word" "$@"
+    shift
+    ac_cv_prog_CC="$@"
+  fi
+fi
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+  echo "$ac_t""$CC" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+echo "configure:1037: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.c <<EOF
+#ifdef __GNUC__
+  yes;
+#endif
+EOF
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1046: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+  ac_cv_prog_gcc=yes
+else
+  ac_cv_prog_gcc=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+
+if test $ac_cv_prog_gcc = yes; then
+  GCC=yes
+  ac_test_CFLAGS="${CFLAGS+set}"
+  ac_save_CFLAGS="$CFLAGS"
+  CFLAGS=
+  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:1061: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  echo 'void f(){}' > conftest.c
+if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
+  ac_cv_prog_cc_g=yes
+else
+  ac_cv_prog_cc_g=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+  if test "$ac_test_CFLAGS" = set; then
+    CFLAGS="$ac_save_CFLAGS"
+  elif test $ac_cv_prog_cc_g = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-O2"
+  fi
+else
+  GCC=
+  test "${CFLAGS+set}" = set || CFLAGS="-g"
+fi
+
+
+# AC_CHECK_TOOL does AC_REQUIRE (AC_CANONICAL_BUILD).  If we don't
+# run it explicitly here, it will be run implicitly before
+# NEWLIB_CONFIGURE, which doesn't work because that means that it will
+# be run before AC_CANONICAL_HOST.
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:1094: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+  case $nonopt in
+  NONE) build_alias=$host_alias ;;
+  *) build_alias=$nonopt ;;
+  esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+
+# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
+set dummy ${ac_tool_prefix}as; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1115: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$AS"; then
+  ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_AS="${ac_tool_prefix}as"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
+fi
+fi
+AS="$ac_cv_prog_AS"
+if test -n "$AS"; then
+  echo "$ac_t""$AS" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+
+
+# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1147: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_AR="${ac_tool_prefix}ar"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
+fi
+fi
+AR="$ac_cv_prog_AR"
+if test -n "$AR"; then
+  echo "$ac_t""$AR" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+
+
+# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1179: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+  echo "$ac_t""$RANLIB" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+
+if test -z "$ac_cv_prog_RANLIB"; then
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1211: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_RANLIB="ranlib"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+  echo "$ac_t""$RANLIB" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+else
+  RANLIB=":"
+fi
+fi
+
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:1256: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
+  for ac_dir in $PATH; do
+    # Account for people who put trailing slashes in PATH elements.
+    case "$ac_dir/" in
+    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+    *)
+      # OSF1 and SCO ODT 3.0 have their own names for install.
+      # Don't use installbsd from OSF since it installs stuff as root
+      # by default.
+      for ac_prog in ginstall scoinst install; do
+        if test -f $ac_dir/$ac_prog; then
+	  if test $ac_prog = install &&
+            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  else
+	    ac_cv_path_install="$ac_dir/$ac_prog -c"
+	    break 2
+	  fi
+	fi
+      done
+      ;;
+    esac
+  done
+  IFS="$ac_save_IFS"
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL="$ac_cv_path_install"
+  else
+    # As a last resort, use the slow shell script.  We don't cache a
+    # path for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the path is relative.
+    INSTALL="$ac_install_sh"
+  fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
+echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
+echo "configure:1310: checking whether to enable maintainer-specific portions of Makefiles" >&5
+    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then
+  enableval="$enable_maintainer_mode"
+  USE_MAINTAINER_MODE=$enableval
+else
+  USE_MAINTAINER_MODE=no
+fi
+
+  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
+  
+
+if test $USE_MAINTAINER_MODE = yes; then
+  MAINTAINER_MODE_TRUE=
+  MAINTAINER_MODE_FALSE='#'
+else
+  MAINTAINER_MODE_TRUE='#'
+  MAINTAINER_MODE_FALSE=
+fi
+  MAINT=$MAINTAINER_MODE_TRUE
+  
+
+
+# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
+# at least currently, we never actually build a program, so we never
+# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
+# fails, because we are probably configuring with a cross compiler
+# which can't create executables.  So we include AC_EXEEXT to keep
+# automake happy, but we don't execute it, since we don't care about
+# the result.
+if false; then
+  
+
+echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
+echo "configure:1344: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
+  ac_cv_exeext=.exe
+else
+  rm -f conftest*
+  echo 'int main () { return 0; }' > conftest.$ac_ext
+  ac_cv_exeext=
+  if { (eval echo configure:1354: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+    for file in conftest.*; do
+      case $file in
+      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
+      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
+      esac
+    done
+  else
+    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
+  fi
+  rm -f conftest*
+  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
+fi
+fi
+
+EXEEXT=""
+test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
+echo "$ac_t""${ac_cv_exeext}" 1>&6
+ac_exeext=$EXEEXT
+
+fi
+
+. ${newlib_basedir}/configure.host
+
+case ${newlib_basedir} in
+/* | A-Za-z:/\\*) newlib_flagbasedir=${newlib_basedir} ;;
+*) newlib_flagbasedir='$(top_builddir)/'${newlib_basedir} ;;
+esac
+
+newlib_cflags="${newlib_cflags} -I"'$(top_builddir)'"/../../../targ-include -I${newlib_flagbasedir}/libc/include"
+case "${host}" in
+  *-*-cygwin*)
+    newlib_cflags="${newlib_cflags} -I${newlib_flagbasedir}/../winsup/cygwin/include  -I${newlib_flagbasedir}/../winsup/w32api/include"
+    ;;
+esac
+
+newlib_cflags="${newlib_cflags} -fno-builtin"
+
+NEWLIB_CFLAGS=${newlib_cflags}
+
+
+
+
+
+
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs.  It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already.  You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+  case `(ac_space=' '; set | grep ac_space) 2>&1` in
+  *ac_space=\ *)
+    # `set' does not quote correctly, so add quotes (double-quote substitution
+    # turns \\\\ into \\, and sed turns \\ into \).
+    sed -n \
+      -e "s/'/'\\\\''/g" \
+      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+    ;;
+  *)
+    # `set' quotes correctly as required by POSIX, so do not add quotes.
+    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+    ;;
+  esac >> confcache
+if cmp -s $cache_file confcache; then
+  :
+else
+  if test -w $cache_file; then
+    echo "updating cache $cache_file"
+    cat confcache > $cache_file
+  else
+    echo "not updating unwritable cache $cache_file"
+  fi
+fi
+rm -f confcache
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Any assignment to VPATH causes Sun make to only execute
+# the first set of double-colon rules, so remove it if not needed.
+# If there is a colon in the path, we need to keep it.
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
+fi
+
+trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+cat > conftest.defs <<\EOF
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
+s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
+s%\[%\\&%g
+s%\]%\\&%g
+s%\$%$$%g
+EOF
+DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
+rm -f conftest.defs
+
+
+# Without the "./", some shells look in PATH for config.status.
+: ${CONFIG_STATUS=./config.status}
+
+echo creating $CONFIG_STATUS
+rm -f $CONFIG_STATUS
+cat > $CONFIG_STATUS <<EOF
+#! /bin/sh
+# Generated automatically by configure.
+# Run this file to recreate the current configuration.
+# This directory was configured as follows,
+# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# $0 $ac_configure_args
+#
+# Compiler output produced by configure, useful for debugging
+# configure, is in ./config.log if it exists.
+
+ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
+for ac_option
+do
+  case "\$ac_option" in
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
+    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
+  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
+    echo "$CONFIG_STATUS generated by autoconf version 2.13"
+    exit 0 ;;
+  -help | --help | --hel | --he | --h)
+    echo "\$ac_cs_usage"; exit 0 ;;
+  *) echo "\$ac_cs_usage"; exit 1 ;;
+  esac
+done
+
+ac_given_srcdir=$srcdir
+ac_given_INSTALL="$INSTALL"
+
+trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+# Protect against being on the right side of a sed subst in config.status.
+sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
+ s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
+$ac_vpsub
+$extrasub
+s%@SHELL@%$SHELL%g
+s%@CFLAGS@%$CFLAGS%g
+s%@CPPFLAGS@%$CPPFLAGS%g
+s%@CXXFLAGS@%$CXXFLAGS%g
+s%@FFLAGS@%$FFLAGS%g
+s%@DEFS@%$DEFS%g
+s%@LDFLAGS@%$LDFLAGS%g
+s%@LIBS@%$LIBS%g
+s%@exec_prefix@%$exec_prefix%g
+s%@prefix@%$prefix%g
+s%@program_transform_name@%$program_transform_name%g
+s%@bindir@%$bindir%g
+s%@sbindir@%$sbindir%g
+s%@libexecdir@%$libexecdir%g
+s%@datadir@%$datadir%g
+s%@sysconfdir@%$sysconfdir%g
+s%@sharedstatedir@%$sharedstatedir%g
+s%@localstatedir@%$localstatedir%g
+s%@libdir@%$libdir%g
+s%@includedir@%$includedir%g
+s%@oldincludedir@%$oldincludedir%g
+s%@infodir@%$infodir%g
+s%@mandir@%$mandir%g
+s%@newlib_basedir@%$newlib_basedir%g
+s%@host@%$host%g
+s%@host_alias@%$host_alias%g
+s%@host_cpu@%$host_cpu%g
+s%@host_vendor@%$host_vendor%g
+s%@host_os@%$host_os%g
+s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
+s%@INSTALL_DATA@%$INSTALL_DATA%g
+s%@PACKAGE@%$PACKAGE%g
+s%@VERSION@%$VERSION%g
+s%@ACLOCAL@%$ACLOCAL%g
+s%@AUTOCONF@%$AUTOCONF%g
+s%@AUTOMAKE@%$AUTOMAKE%g
+s%@AUTOHEADER@%$AUTOHEADER%g
+s%@MAKEINFO@%$MAKEINFO%g
+s%@SET_MAKE@%$SET_MAKE%g
+s%@CC@%$CC%g
+s%@build@%$build%g
+s%@build_alias@%$build_alias%g
+s%@build_cpu@%$build_cpu%g
+s%@build_vendor@%$build_vendor%g
+s%@build_os@%$build_os%g
+s%@AS@%$AS%g
+s%@AR@%$AR%g
+s%@RANLIB@%$RANLIB%g
+s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
+s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
+s%@MAINT@%$MAINT%g
+s%@EXEEXT@%$EXEEXT%g
+s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
+s%@machine_dir@%$machine_dir%g
+s%@sys_dir@%$sys_dir%g
+
+CEOF
+EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+
+# Split the substitutions into bite-sized pieces for seds with
+# small command number limits, like on Digital OSF/1 and HP-UX.
+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+ac_file=1 # Number of current file.
+ac_beg=1 # First line for current file.
+ac_end=$ac_max_sed_cmds # Line after last line for current file.
+ac_more_lines=:
+ac_sed_cmds=""
+while $ac_more_lines; do
+  if test $ac_beg -gt 1; then
+    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+  else
+    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+  fi
+  if test ! -s conftest.s$ac_file; then
+    ac_more_lines=false
+    rm -f conftest.s$ac_file
+  else
+    if test -z "$ac_sed_cmds"; then
+      ac_sed_cmds="sed -f conftest.s$ac_file"
+    else
+      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+    fi
+    ac_file=`expr $ac_file + 1`
+    ac_beg=$ac_end
+    ac_end=`expr $ac_end + $ac_max_sed_cmds`
+  fi
+done
+if test -z "$ac_sed_cmds"; then
+  ac_sed_cmds=cat
+fi
+EOF
+
+cat >> $CONFIG_STATUS <<EOF
+
+CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case "$ac_file" in
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+  *) ac_file_in="${ac_file}.in" ;;
+  esac
+
+  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+
+  # Remove last slash and all that follows it.  Not all systems have dirname.
+  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+    # The file is in a subdirectory.
+    test ! -d "$ac_dir" && mkdir "$ac_dir"
+    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
+    # A "../" for each directory in $ac_dir_suffix.
+    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
+  else
+    ac_dir_suffix= ac_dots=
+  fi
+
+  case "$ac_given_srcdir" in
+  .)  srcdir=.
+      if test -z "$ac_dots"; then top_srcdir=.
+      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
+  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+  *) # Relative path.
+    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
+    top_srcdir="$ac_dots$ac_given_srcdir" ;;
+  esac
+
+  case "$ac_given_INSTALL" in
+  [/$]*) INSTALL="$ac_given_INSTALL" ;;
+  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
+  esac
+
+  echo creating "$ac_file"
+  rm -f "$ac_file"
+  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
+  case "$ac_file" in
+  *Makefile*) ac_comsub="1i\\
+# $configure_input" ;;
+  *) ac_comsub= ;;
+  esac
+
+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+  sed -e "$ac_comsub
+s%@configure_input@%$configure_input%g
+s%@srcdir@%$srcdir%g
+s%@top_srcdir@%$top_srcdir%g
+s%@INSTALL@%$INSTALL%g
+" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+fi; done
+rm -f conftest.s*
+
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+
+exit 0
+EOF
+chmod +x $CONFIG_STATUS
+rm -fr confdefs* $ac_clean_files
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+
diff --git a/newlib/libc/machine/hppa/configure.in b/newlib/libc/machine/hppa/configure.in
new file mode 100644
index 000000000..59ec18d3a
--- /dev/null
+++ b/newlib/libc/machine/hppa/configure.in
@@ -0,0 +1,12 @@
+dnl This is the newlib/libc/machine/hppa configure.in file.
+dnl Process this file with autoconf to produce a configure script.
+
+AC_PREREQ(2.5)
+AC_INIT(memchr.S)
+
+dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
+AC_CONFIG_AUX_DIR(../../../..)
+
+NEWLIB_CONFIGURE(../../..)
+
+AC_OUTPUT(Makefile)
diff --git a/newlib/libc/machine/hppa/memchr.S b/newlib/libc/machine/hppa/memchr.S
new file mode 100644
index 000000000..1cca3e5e8
--- /dev/null
+++ b/newlib/libc/machine/hppa/memchr.S
@@ -0,0 +1,48 @@
+/*
+ *  (c) Copyright 1986 HEWLETT-PACKARD COMPANY
+ *
+ *  To anyone who acknowledges that this file is provided "AS IS"
+ *  without any express or implied warranty:
+ *      permission to use, copy, modify, and distribute this file
+ *  for any purpose is hereby granted without fee, provided that
+ *  the above copyright notice and this notice appears in all
+ *  copies, and that the name of Hewlett-Packard Company not be
+ *  used in advertising or publicity pertaining to distribution
+ *  of the software without specific, written prior permission.
+ *  Hewlett-Packard Company makes no representations about the
+ *  suitability of this software for any purpose.
+ */
+
+/* SPECTRUM_ID: @(#)memchr.s	37.4     86/04/23 */
+/*
+ * memchr(s, c, n)
+ *
+ * returns pointer to first occurrence of char c
+ * in first n characters of memory area s,
+ * or null if c does not occur.
+ */
+
+#include "DEFS.h"
+
+#define FROM	arg0
+#define CHAR	arg1
+#define COUNT	arg2
+#define TEMP1	r19
+
+ENTRY(memchr)
+	comb,<=	COUNT,r0,memchrexit	/* return if count is zero */
+	copy	r0,ret0			/* null if c not found in n chars */
+	depi	0,23,24,CHAR		/* make char unsigned */
+
+	ldbs,ma	1(FROM),TEMP1
+memchrloop:
+	comb,=,n	TEMP1,CHAR,memchrequal
+	addib,<>	-1,COUNT,memchrloop
+	ldbs,ma	1(FROM),TEMP1
+	b,n	memchrexit
+
+memchrequal:
+	ldo	-1(FROM),ret0
+
+memchrexit:
+EXIT(memchr)
diff --git a/newlib/libc/machine/hppa/memcmp.S b/newlib/libc/machine/hppa/memcmp.S
new file mode 100644
index 000000000..babb20761
--- /dev/null
+++ b/newlib/libc/machine/hppa/memcmp.S
@@ -0,0 +1,183 @@
+/*
+ *  (c) Copyright 1986 HEWLETT-PACKARD COMPANY
+ *
+ *  To anyone who acknowledges that this file is provided "AS IS"
+ *  without any express or implied warranty:
+ *      permission to use, copy, modify, and distribute this file
+ *  for any purpose is hereby granted without fee, provided that
+ *  the above copyright notice and this notice appears in all
+ *  copies, and that the name of Hewlett-Packard Company not be
+ *  used in advertising or publicity pertaining to distribution
+ *  of the software without specific, written prior permission.
+ *  Hewlett-Packard Company makes no representations about the
+ *  suitability of this software for any purpose.
+ */
+
+/* memcmp(s1, s2, n) */
+/* returns integer: < 0 iff s1 lexicographically less than s2 */
+/* 		    > 0 iff s1 lexicographically greater than s2 */
+/* 		    = 0 iff s1 lexicographically equal to s2 */
+/*  		    = 0 iff s1 lexicographically equal to s2 */
+/*		    quit after n charachters */
+#ifndef _NAMESPACE_CLEAN
+#define NOSECDEF   /* prevents _memcmp from becoming primary entry */
+#endif
+
+#include "DEFS.h"
+
+#define s1 26
+#define s2 25
+#define tmp1 19
+#define s2word 20
+#define tmp3 21
+#define tmp7 22
+#define s1word 29
+#define save 1
+#define tmp6 23
+#define tmp5 28
+#define count 24
+
+ENTRY(memcmp)
+	combt,<,n	r0,count,search	/*N <= 0 yields equality */
+	b	done			/**/
+	copy	0,ret0			/*return 0 (DELAY SLOT) */
+search:	combf,=,n 	s1,s2,findout 	/*s1 != s2? */
+        b	done
+        copy 	0,ret0			/*return 0 (delay slot) 	 */
+findout:
+        comibf,=,n 	0,s1,checks1	/*s1 == NULL? 	 */
+	ldbs	0(0,s2),ret0		/**/
+        b	done 			/*quit	 */
+	sub	0,ret0,ret0		/*ret0 <- -*s2 */
+checks1:
+        comibf,=,n 	0,s2,checkitout	/*s2 == NULL? 	 */
+        b	done 			/* quit	 */
+        ldbs 	0(0,s1),28 		/* return *s1 */
+
+checkitout:
+        extru	s2,31,2,tmp1		/* Extract the low two bits of the s2. */
+        extru	s1,31,2,tmp5		/* Extract the low two bits of the s1 */
+        sub,=	tmp5,tmp1,tmp3		/* Are s1 & s2 aligned with each other? */
+	b	not_aligned		/* It's more complicated (not_aligned) */
+	dep	0,31,2,s1		/* Compute word address of s1 (DELAY SLOT) */
+	dep	0,31,2,s2		/* Compute word address of s2 */
+	ldwm	4(0,s1),s1word		/* get next s1 word  s1+=4 */
+	combt,=	tmp5,r0,skipmask	/* skip masking, if we can */
+	ldwm	4(0,s2),s2word		/* get next s2 word  s2+=4 (DELAY SLOT) */
+	add	tmp5,count,count	/* bump count by the number of bytes */
+					/*  we are going to mask */
+	sh3add	tmp5,r0,save		/* save now has number of bits to mask */
+	mtctl	save,11
+	zvdepi	-2,32,save		/* load save with proper mask */
+	or	save,s1word,s1word	/* mask s1word (s1) */
+	or	save,s2word,s2word	/* mask s2word (s2) */
+ 	
+
+skipmask:
+	combt,=,n	s1word,s2word,checkN	/* We may be done */
+
+checkbyte:
+	extru	s1word,7,8,tmp3		/* get first byte (character) */
+ckbyte2:	extru	s2word,7,8,tmp7		/* get first byte (character) */
+	combf,=	tmp3,tmp7,done		/* quit if first byte is not equal */
+	sub	tmp3,tmp7,ret0		/* return difference (delay slot) */
+	addibt,<=,n	-1,count,done	/* have we checked N chars? ret0 == 0 */
+	extru	s1word,15,8,tmp3	/* get second byte (character) */
+	extru	s2word,15,8,tmp7	/* get second byte (character)	 */
+	combf,=	tmp3,tmp7,done		/* quit if second byte is not equal */
+	sub	tmp3,tmp7,ret0		/* return difference (delay slot) */
+	addibt,<=,n	-1,count,done	/* have we checked N chars? */
+	extru	s1word,23,8,tmp3	/* get third byte (character) */
+	extru	s2word,23,8,tmp7	/* get third byte (character)	 */
+	combf,=	tmp3,tmp7,done		/* done if third byte is not equal */
+	sub	tmp3,tmp7,ret0		/* return difference (delay slot) */
+	addibt,<=,n	-1,count,done	/* have we checked N chars? */
+	extru	s1word,31,8,tmp3	/* get last byte (character) */
+	extru	s2word,31,8,tmp7	/* get last byte (character)	 */
+	b	done			/* if we reach this point we know that */
+	sub	tmp3,tmp7,ret0		/*  the last character in the word is */
+					/*   where the  difference is, so return */
+					/*    the difference and we're outta here */
+
+
+checkN:
+	addibt,<=,n	-4,count,zero	/* have we checked N chars? */
+	ldwm	4(0,s2),s2word		/* get next s2 word  s2+=4 */
+	b	skipmask		/* keep checking */
+	ldwm	4(0,s1),s1word		/* get next s1 word  s1+=4 */
+
+
+not_aligned:
+	dep	r0,31,2,s2		/* Compute word address of s2 */
+	combt,<,n	r0,tmp3,shifts1	/* Do we shift s1 or s2 */
+	sh3add	tmp3,r0,tmp3		/* eight bits per byte so mul by 8 */
+	ldwm	4(0,s1),s1word		/* get first word of s1 */
+	ldwm	4(0,s2),s2word		/* get first word or s2 */
+	combt,=,n	r0,tmp5,masks2	/* Do we need to mask beginning of s1 */
+	add	tmp5,count,count	/* bump count by the number of bytes */
+					/*  we are going to mask */
+	sh3add	tmp5,r0,save		/* save now has number of bits to mask */
+	mtctl	save,11
+	zvdepi	-2,32,save		/* load save with proper mask */
+	or	save,s1word,s1word	/**/
+masks2:	sh3add	tmp1,r0,save		/* save now has number of bits to mask */
+	mtctl	save,11
+	zvdepi	-2,32,save		/* load save with proper mask */
+	or	save,s2word,s2word	/**/
+	subi	4,tmp1,tmp1		/* tmp1 now has the number of byte that */
+					/* are valid in s2word before the vshd */
+	mtctl	tmp3,11			/* Move shift amount to CR11 */
+more:	combt,<=,n	count,tmp1,chunk1	/* Can we do the vshd? */
+	ldwm	4(0,s2),tmp7		/* load second word to enable us to shift */
+	vshd	s2word,tmp7,s2word	/**/
+	combf,=,n	s1word,s2word,ckbyte2	/**/
+	extru	s1word,7,8,tmp3		/* get first byte (DELAY SLOT) */
+	addibt,<=,n	-4,count,zero	/* have we checked N chars? */
+	copy	tmp7,s2word		/**/
+	b	more			/* keep checking */
+	ldwm	4(0,s1),s1word		/* get next s1 (DELAY SLOT) */
+
+chunk1:
+	vshd	s2word,r0,s2word	/* do an arithmetic shift left to position data */
+	b	ckbyte2			/**/
+	extru	s1word,7,8,tmp3		/**/
+
+
+shifts1:
+	sh3add	tmp3,r0,tmp3		/* eight bits per byte so mul by 8 */
+	sub	r0,tmp3,tmp3		/* Get negative value for left shift */
+	dep	r0,31,2,s2		/* Compute word address of s2 */
+	ldwm	4(0,s2),s2word		/* get first word of s2 */
+	ldwm	4(0,s1),s1word		/* get first word or s1 */
+	combt,=,n	r0,tmp1,masks1	/*Do we need to mask beginning of s2 */
+	add	tmp1,count,count	/*bump count by the number of bytes */
+					/* we are going to mask */
+	sh3add	tmp1,r0,save		/*save now has number of bits to mask */
+	mtctl	save,11
+	zvdepi	-2,32,save		/*load save with proper mask */
+	or	save,s2word,s2word	/**/
+masks1:	sh3add	tmp5,r0,save		/*save now has number of bits to mask */
+	mtctl	save,11
+	zvdepi	-2,32,save		/*load save with proper mask */
+	or	save,s1word,s1word	/**/
+	subi	4,tmp5,tmp5		/*tmp5 now has the number of byte that */
+					/*are valid in s1word before the vshd */
+	mtctl	tmp3,11			/*Move shift amount to CR11 */
+more1:	combt,<=,n	count,tmp5,chunk2	/*Can we do the vshd? */
+	ldwm	4(0,s1),tmp7		/*load second word to enable us to shift */
+	vshd	s1word,tmp7,s1word	/**/
+	combf,=,n	s2word,s1word,ckbyte2	/**/
+	extru	s1word,7,8,tmp3		/*get first byte (DELAY SLOT) */
+	addibt,<=,n	-4,count,zero	/*have we checked N chars? */
+	copy	tmp7,s1word		/**/
+	b	more1			/*keep checking */
+	ldwm	4(0,s2),s2word		/*get next s2 (DELAY SLOT) */
+
+chunk2:	
+	vshd	s1word,r0,s1word	/**/
+	b	ckbyte2			/**/
+	extru	s1word,7,8,tmp3		/**/
+
+zero:	copy 	r0,ret0
+done:
+EXIT(memcmp)
diff --git a/newlib/libc/machine/hppa/memcpy.S b/newlib/libc/machine/hppa/memcpy.S
new file mode 100644
index 000000000..713c1c11b
--- /dev/null
+++ b/newlib/libc/machine/hppa/memcpy.S
@@ -0,0 +1,146 @@
+/*
+ *  (c) Copyright 1986 HEWLETT-PACKARD COMPANY
+ *
+ *  To anyone who acknowledges that this file is provided "AS IS"
+ *  without any express or implied warranty:
+ *      permission to use, copy, modify, and distribute this file
+ *  for any purpose is hereby granted without fee, provided that
+ *  the above copyright notice and this notice appears in all
+ *  copies, and that the name of Hewlett-Packard Company not be
+ *  used in advertising or publicity pertaining to distribution
+ *  of the software without specific, written prior permission.
+ *  Hewlett-Packard Company makes no representations about the
+ *  suitability of this software for any purpose.
+ */
+
+/* HPUX_ID:	@(#) $Revision$	*/
+/*
+ * memcpy(s1, s2, n)
+ *
+ * Copy n characters from s2 to s1; returns s1.
+ */
+
+#define d_addr  arg0
+#define s_addr  arg1
+#define count   arg2
+#define tmp5	arg3
+#define tmp1    r19
+#define tmp2    r20
+#define tmp3    r21
+#define tmp4    r22
+#define tmp6	r31
+
+#include "DEFS.h"
+
+ENTRY(memcpy)
+        comib,>=  5,count,byteloop     /* If count is <= 6 don't get fancy.*/ 
+        movb,=,n      d_addr,ret0,done    /* The return value is defined to be the value of d_addr. DELAY SLOT */
+					/* if d_addr is null then exit */
+        extru       s_addr,31,2,tmp1   /* Extract the low two bits of the source address. */
+        extru       d_addr,31,2,tmp2   /* Extract the low two bits of the destination address. */
+        add         count,tmp2,count   /* pre increment the count to adjust for alignment of s1 */
+        comb,<>       tmp2,tmp1,not_aligned /* see if s1 is aligned w.r.t. s2. */
+        dep         0,31,2,s_addr      /* Compute the word address of the source.  DELAY SLOT. */
+
+/* aligned */
+
+/* We will now begin the 16 byte at a time word move if count >= 16 ! */
+/* Else we will branch to the  4 byte-at-a time word move ! */
+
+        addibt,<,n -16,count,chekchunk  /* If count < 16 then we can't move 16 byte chunks ! */
+                                        /*   actually we can legally move 13 or more bytes on the first loop.  */
+        /* These loads and stores are done so as to prevent processor interlock. */
+chunks:
+        ldwm        16(0,s_addr),tmp1   /* tmp1 = *s_addr   s_addr += 16 */
+        ldw         -12(0,s_addr),tmp2  /* tmp2 = 2nd word */
+        ldw         -8(0,s_addr),tmp3   /* tmp3 = 3rd word */
+        ldw         -4(0,s_addr),tmp4   /* tmp4 = 4th word */
+        /* Now store the results !  */
+        stbys,b,m   tmp1,4(0,d_addr)   /* tmp1 = 1st word stored d_addr += 16 also take care of front porch. */
+        stwm        tmp2,4(0,d_addr)    /* tmp2 = 2nd word stored. */
+        stwm        tmp3,4(0,d_addr)   /* tmp3 = 3rd word stored. */
+        addibf,<    -16,count,chunks    /* If count is still >= 16 do another loop. */
+        stwm        tmp4,4(0,d_addr)   /* tmp4 = 4th word stored. DELAY SLOT */
+
+chekchunk:
+        addibt,<,n  12,count,back_porch /* since the count is already decremented by -16 we're testing */
+                                        /*   to see if there are at least 4 bytes left ? */
+subchunk:
+        ldws,ma      4(s_addr),tmp1     /* tmp1 = *s_addr++ */
+        addibf,<     -4,count,subchunk  /* count -= 4 */
+        stbys,b,m    tmp1,4(d_addr)     /* *d_addr++ = tmp1 */
+
+
+back_porch:
+         addibt,=,n  4,count,done       /* if count = 0 we're, of course, done ! */
+         ldws        0(s_addr),tmp1     /* load up the back_porch */
+         add         d_addr,count,d_addr/* final store address  is +1 too high ! */
+	 bv		0(r2)		/* return--were done. */
+         stbys,e     tmp1,0(d_addr)    /* kerplunk! whew !  */
+
+/* Begin non_aligned code. (no refrence to politics) */
+not_aligned:
+        sub,>=       tmp2,tmp1,tmp3     /* compute the shift quantity again and skip the load if tmp2 > tmp1. */
+        ldwm         4(0,s_addr),tmp1   /* load up the first word from the source. tmp1 = *s_addr++ */
+        zdep         tmp3,28,29,tmp4    /* compute the number of bits to shift based on the number of bytes above. */
+        mtctl        tmp4,11            /* load the shift count into cr11 = shift count register. */
+
+        addibt,<,n   -16,count,chkchnk2 /* first step in pre adjustment of count for looping. */
+
+chunk2:   
+        ldwm        	16(0,s_addr),tmp2    /* get either first or second word . tmp2 = *s_addr++ */
+	ldw		-12(s_addr),tmp3
+	ldw		-8(s_addr),tmp4
+	ldw		-4(s_addr),tmp5
+        vshd		tmp1,tmp2,tmp6      /* position data !  */
+        stbys,b,m	tmp6,4(0,d_addr)    /* store !  */
+
+        vshd		tmp2,tmp3,tmp6      /* position data !  */
+        stwm		tmp6,4(0,d_addr)    /* store ! */
+
+        vshd		tmp3,tmp4,tmp6      /* position data ! */
+        stwm		tmp6,4(0,d_addr)    /* store ! */
+
+        vshd		tmp4,tmp5,tmp6      /* position data ! */
+        stwm   		tmp6,4(0,d_addr)    /* store the data ! */
+        addibf,<    -16,count,chunk2    /* If count is still >= 16 do another loop. */
+	copy		tmp5,tmp1
+        
+
+chkchnk2:
+        addibt,<,n  12,count,bp_0       /* if we don't have 4 bytes left then do the back porch (bp_0) */
+
+subchnk2: 
+        ldwm        4(0,s_addr),tmp2    /* get next word ! */
+        vshd        tmp1,tmp2,tmp3      /* position data ! */
+        addibt,<    -4,count,bp_1       /* decrement count and when count < 4 goto back_porch (bp_1) */
+        stbys,b,m   tmp3,4(0,d_addr)    /* store ! */
+
+        ldwm        4(0,s_addr),tmp1    /* get 4th word ! */
+        vshd        tmp2,tmp1,tmp3      /* position data ! */
+        addib,>=    -4,count,subchnk2   /* decrement count and when count <= 4 go to back porch (bp_2) */
+        stbys,b,m   tmp3,4(0,d_addr)    /* store the data ! */
+
+bp_0:    copy        tmp1,tmp2           /* switch registers used in the shift process. */
+bp_1:    addibt,<=,n  4,count,done        /* if count = -4 this implies that count = 0 -> done  */
+        add         d_addr,count,d_addr /* bump destination address to be +1 too high ! */
+	mfctl		sar,tmp3	/* suppress final ldwm unless result used */
+	extru		tmp3,28,2,tmp3	/* convert bitshift to byteshift */
+	sub,<=		count,tmp3,r0	/* bytes unused if (count-byteshift <= 0*/
+
+        ldwm        4(0,s_addr),tmp1    /* get final word !         */
+        vshd        tmp2,tmp1,tmp3      /* position data ! */
+	bv		0(r2)		/* return */
+        stbys,e     tmp3,0(0,d_addr)    /* store the data ! */
+
+/* here we do ye old byte-at-a-time moves. */
+byteloop: 
+        comb,>=,n    0,count,done
+
+encore:
+        ldbs,ma     1(s_addr),tmp1
+        addibf,=   -1,count,encore
+        stbs,ma     tmp1,1(d_addr) 
+
+done:
+EXIT(memcpy)
diff --git a/newlib/libc/machine/hppa/memset.S b/newlib/libc/machine/hppa/memset.S
new file mode 100644
index 000000000..cea738251
--- /dev/null
+++ b/newlib/libc/machine/hppa/memset.S
@@ -0,0 +1,85 @@
+/*
+ *  (c) Copyright 1986 HEWLETT-PACKARD COMPANY
+ *
+ *  To anyone who acknowledges that this file is provided "AS IS"
+ *  without any express or implied warranty:
+ *      permission to use, copy, modify, and distribute this file
+ *  for any purpose is hereby granted without fee, provided that
+ *  the above copyright notice and this notice appears in all
+ *  copies, and that the name of Hewlett-Packard Company not be
+ *  used in advertising or publicity pertaining to distribution
+ *  of the software without specific, written prior permission.
+ *  Hewlett-Packard Company makes no representations about the
+ *  suitability of this software for any purpose.
+ */
+
+/* SPECTRUM_ID: @(#)memset.s	37.4     86/08/25 */
+/*
+ * memset(s, c, n)
+ *
+ * Sets first n chars in memory area s to value of character c.
+ * Returns s.
+ */
+#ifndef _NAMESPACE_CLEAN
+#define NOSECDEF   /* prevent _memset from being defined as entry */
+#endif
+
+#include "DEFS.h"
+
+#define TO	arg0
+#define FILLCHAR arg1
+#define COUNT	arg2
+#define TMP	r31
+
+ENTRY(memset)
+	comb,<=	COUNT,r0,msexit /* return if count not positive */
+	copy	TO,ret0 	/* return value is start of copy */
+	comibf,<,n	5,COUNT,msbyteloop /* be straightforward */
+
+	dep	FILLCHAR,23,8,FILLCHAR	/* dup low byte  */
+	dep	FILLCHAR,15,16,FILLCHAR /* into high bytes */
+
+	add		TO,COUNT,TMP	/* TMP points just past fill area */
+	stbys,m		FILLCHAR,0(TO)	/* fill out first word */
+	/*
+	 * If we're pointing to high-order byte, no fill will happen,
+	 * but permissions will be checked.  We don't want this (we
+	 * might be pointing at the beginning of a protected region),
+	 * so we branch around stbys if neither low bits are set.
+	 */
+	bb,<,n		TMP,31,filend	/* if low bit is set, stbys */
+	bb,>=,n		TMP,30,endfil	/* if next lowest bit isn't set */
+					/*  (and lowest isn't, either) */
+					/*  do not stbys */
+filend:
+	stbys,m,e	FILLCHAR,0(TMP)	/* fill out the last */
+endfil:
+	addi		4, TO, TO
+	sub		TMP,TO,COUNT	/* will now divide by 4 */
+	comb,=,n	COUNT,r0,msexit /* If count is zero ret. */
+
+	extru,<>	COUNT,31,4,r1
+	b		msquadloop
+	depi		0,31,4,COUNT	/* will now divide by 16 */
+
+
+mswordloop:
+	addib,<>	-4,r1,mswordloop
+	stws,ma 	FILLCHAR,4(TO)
+
+	comb,=,n	COUNT,r0,msexit /* If count is zero ret. */
+
+msquadloop:
+	stws,ma 	FILLCHAR,4(TO)
+	stws,ma 	FILLCHAR,4(TO)
+	stws,ma 	FILLCHAR,4(TO)
+	addib,<>	-16,COUNT,msquadloop
+	stws,ma 	FILLCHAR,4(TO)
+	b,n		msexit
+
+msbyteloop:
+	addib,<>	-1,COUNT,msbyteloop
+	stbs,ma		FILLCHAR,1(TO)
+
+msexit:
+EXIT(memset)
diff --git a/newlib/libc/machine/hppa/pcc_prefix.s b/newlib/libc/machine/hppa/pcc_prefix.s
new file mode 100644
index 000000000..24d5254d9
--- /dev/null
+++ b/newlib/libc/machine/hppa/pcc_prefix.s
@@ -0,0 +1,389 @@
+;
+;  (c) Copyright 1986 HEWLETT-PACKARD COMPANY
+;
+;  To anyone who acknowledges that this file is provided "AS IS"
+;  without any express or implied warranty:
+;      permission to use, copy, modify, and distribute this file
+;  for any purpose is hereby granted without fee, provided that
+;  the above copyright notice and this notice appears in all
+;  copies, and that the name of Hewlett-Packard Company not be
+;  used in advertising or publicity pertaining to distribution
+;  of the software without specific, written prior permission.
+;  Hewlett-Packard Company makes no representations about the
+;  suitability of this software for any purpose.
+;
+
+; Standard Hardware Register Definitions for Use with Assembler
+; version A.08.06
+;	- fr16-31 added at Utah
+;~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+; Hardware General Registers
+r0: .equ	0
+
+r1: .equ	1
+
+r2: .equ	2
+
+r3: .equ	3
+
+r4: .equ	4
+
+r5: .equ	5
+
+r6: .equ	6
+
+r7: .equ	7
+
+r8: .equ	8
+
+r9: .equ	9
+
+r10: .equ	10
+
+r11: .equ	11
+
+r12: .equ	12
+
+r13: .equ	13
+
+r14: .equ	14
+
+r15: .equ	15
+
+r16: .equ	16
+
+r17: .equ	17
+
+r18: .equ	18
+
+r19: .equ	19
+
+r20: .equ	20
+
+r21: .equ	21
+
+r22: .equ	22
+
+r23: .equ	23
+
+r24: .equ	24
+
+r25: .equ	25
+
+r26: .equ	26
+
+r27: .equ	27
+
+r28: .equ	28
+
+r29: .equ	29
+
+r30: .equ	30
+
+r31: .equ	31
+
+; Hardware Space Registers
+sr0: .equ	0
+
+sr1: .equ	1
+
+sr2: .equ	2
+
+sr3: .equ	3
+
+sr4: .equ	4
+
+sr5: .equ	5
+
+sr6: .equ	6
+
+sr7: .equ	7
+
+; Hardware Floating Point Registers
+fr0: .equ	0
+
+fr1: .equ	1
+
+fr2: .equ	2
+
+fr3: .equ	3
+
+fr4: .equ	4
+
+fr5: .equ	5
+
+fr6: .equ	6
+
+fr7: .equ	7
+
+fr8: .equ	8
+
+fr9: .equ	9
+
+fr10: .equ	10
+
+fr11: .equ	11
+
+fr12: .equ	12
+
+fr13: .equ	13
+
+fr14: .equ	14
+
+fr15: .equ	15
+
+fr16: .equ	16
+
+fr17: .equ	17
+
+fr18: .equ	18
+
+fr19: .equ	19
+
+fr20: .equ	20
+
+fr21: .equ	21
+
+fr22: .equ	22
+
+fr23: .equ	23
+
+fr24: .equ	24
+
+fr25: .equ	25
+
+fr26: .equ	26
+
+fr27: .equ	27
+
+fr28: .equ	28
+
+fr29: .equ	29
+
+fr30: .equ	30
+
+fr31: .equ	31
+
+; Hardware Control Registers
+cr0: .equ	0
+
+rctr: .equ	0			; Recovery Counter Register
+
+
+cr8: .equ	8			; Protection ID 1
+
+pidr1: .equ	8
+
+
+cr9: .equ	9			; Protection ID 2
+
+pidr2: .equ	9
+
+
+cr10: .equ	10
+
+ccr: .equ	10			; Coprocessor Confiquration Register
+
+
+cr11: .equ	11
+
+sar: .equ	11			; Shift Amount Register
+
+
+cr12: .equ	12
+
+pidr3: .equ	12			; Protection ID 3
+
+
+cr13: .equ	13
+
+pidr4: .equ	13			; Protection ID 4
+
+
+cr14: .equ	14
+
+iva: .equ	14			; Interrupt Vector Address
+
+
+cr15: .equ	15
+
+eiem: .equ	15			; External Interrupt Enable Mask
+
+
+cr16: .equ	16
+
+itmr: .equ	16			; Interval Timer
+
+
+cr17: .equ	17
+
+pcsq: .equ	17			; Program Counter Space queue
+
+
+cr18: .equ	18
+
+pcoq: .equ	18			; Program Counter Offset queue
+
+
+cr19: .equ	19
+
+iir: .equ	19			; Interruption Instruction Register
+
+
+cr20: .equ	20
+
+isr: .equ	20			; Interruption Space Register
+
+
+cr21: .equ	21
+
+ior: .equ	21			; Interruption Offset Register
+
+
+cr22: .equ	22
+
+ipsw: .equ	22			; Interrpution Processor Status Word
+
+
+cr23: .equ	23
+
+eirr: .equ	23			; External Interrupt Request
+
+
+cr24: .equ	24
+
+ppda: .equ	24			; Physcial Page Directory Address
+
+tr0: .equ	24			; Temporary register 0
+
+
+cr25: .equ	25
+
+hta: .equ	25			; Hash Table Address
+
+tr1: .equ	25			; Temporary register 1
+
+
+cr26: .equ	26
+
+tr2: .equ	26			; Temporary register 2
+
+
+cr27: .equ	27
+
+tr3: .equ	27			; Temporary register 3
+
+
+cr28: .equ	28
+
+tr4: .equ	28			; Temporary register 4
+
+
+cr29: .equ	29
+
+tr5: .equ	29			; Temporary register 5
+
+
+cr30: .equ	30
+
+tr6: .equ	30			; Temporary register 6
+
+
+cr31: .equ	31
+
+tr7: .equ	31			; Temporary register 7
+
+;~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+; Procedure Call Convention                                                  ~
+; Register Definitions for Use with Assembler                                ~
+; version A.08.06
+;~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+; Software Architecture General Registers
+rp: .equ    r2	; return pointer
+
+mrp: .equ	r31	; millicode return pointer
+
+ret0: .equ    r28	; return value
+
+ret1: .equ    r29	; return value (high part of double)
+
+sl: .equ    r29	; static link
+
+sp: .equ 	r30	; stack pointer
+
+dp: .equ	r27	; data pointer
+
+arg0: .equ	r26	; argument
+
+arg1: .equ	r25	; argument or high part of double argument
+
+arg2: .equ	r24	; argument
+
+arg3: .equ	r23	; argument or high part of double argument
+
+;_____________________________________________________________________________
+; Software Architecture Space Registers
+;		sr0	; return link form BLE
+sret: .equ	sr1	; return value
+
+sarg: .equ	sr1	; argument
+
+;		sr4	; PC SPACE tracker
+;		sr5	; process private data
+;_____________________________________________________________________________
+; Software Architecture Pseudo Registers
+previous_sp: .equ	64	; old stack pointer (locates previous frame)
+
+;~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+;~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+; Standard space and subspace definitions.  version A.08.06
+; These are generally suitable for programs on HP_UX and HPE.
+; Statements commented out are used when building such things as operating
+; system kernels.
+;;;;;;;;;;;;;;;;
+	.SPACE	$TEXT$,		SPNUM=0,SORT=8
+;	.subspa $FIRST$,	QUAD=0,ALIGN=2048,ACCESS=0x2c,SORT=4,FIRST
+;	.subspa $REAL$,		QUAD=0,ALIGN=8,ACCESS=0x2c,SORT=4,FIRST,LOCK
+	.subspa $MILLICODE$,	QUAD=0,ALIGN=8,ACCESS=0x2c,SORT=8
+	.subspa $LIT$,		QUAD=0,ALIGN=8,ACCESS=0x2c,SORT=16
+	.subspa $CODE$,		QUAD=0,ALIGN=8,ACCESS=0x2c,SORT=24
+;	.subspa $UNWIND$,	QUAD=0,ALIGN=4,ACCESS=0x2c,SORT=64
+;	.subspa $RECOVER$,	QUAD=0,ALIGN=4,ACCESS=0x2c,SORT=80
+;	.subspa $RESERVED$,	QUAD=0,ALIGN=8,ACCESS=0x73,SORT=82
+;	.subspa $GATE$,		QUAD=0,ALIGN=8,ACCESS=0x4c,SORT=84,CODE_ONLY
+; Additional code subspaces should have ALIGN=8 for an interspace BV
+; and should have SORT=24.
+; 
+; For an incomplete executable (program bound to shared libraries), 
+; sort keys $GLOBAL$ -1 and $GLOBAL$ -2 are reserved for the $DLT$ 
+; and $PLT$ subspaces respectively. 
+;;;;;;;;;;;;;;;
+	.SPACE $PRIVATE$,	SPNUM=1,PRIVATE,SORT=16
+	.subspa $GLOBAL$,	QUAD=1,ALIGN=8,ACCESS=0x1f,SORT=40
+	.import $global$
+	.subspa $SHORTDATA$,	QUAD=1,ALIGN=8,ACCESS=0x1f,SORT=24
+	.subspa $DATA$,		QUAD=1,ALIGN=8,ACCESS=0x1f,SORT=16
+	.subspa $PFA_COUNTER$,	QUAD=1,ALIGN=4,ACCESS=0x1f,SORT=8
+	.subspa $SHORTBSS$,     QUAD=1,ALIGN=8,ACCESS=0x1f,SORT=80,ZERO
+	.subspa $BSS$,		QUAD=1,ALIGN=8,ACCESS=0x1f,SORT=82,ZERO
+;	.subspa $PCB$,		QUAD=1,ALIGN=8,ACCESS=0x10,SORT=82
+;	.subspa	$STACK$,	QUAD=1,ALIGN=8,ACCESS=0x1f,SORT=82
+;	.subspa	$HEAP$,		QUAD=1,ALIGN=8,ACCESS=0x1f,SORT=82
+;;;;;;;;;;;;;;;;
+;	.SPACE	$PFA$,		SPNUM=0,PRIVATE,UNLOADABLE,SORT=64
+;	.subspa	$PFA_ADDRESS$,	ALIGN=4,ACCESS=0x2c,UNLOADABLE
+;;;;;;;;;;;;;;;;
+;	.SPACE	$DEBUG$,	SPNUM=2,PRIVATE,UNLOADABLE,SORT=80
+;	.subspa $HEADER$,	ALIGN=4,ACCESS=0,UNLOADABLE,FIRST
+;	.subspa	$GNTT$,		ALIGN=4,ACCESS=0,UNLOADABLE
+;	.subspa $LNTT$,		ALIGN=4,ACCESS=0,UNLOADABLE
+;	.subspa	$SLT$,		ALIGN=4,ACCESS=0,UNLOADABLE
+;	.subspa $VT$,		ALIGN=4,ACCESS=0,UNLOADABLE
+
+; To satisfy the copyright terms each .o will have a reference
+; the the actual copyright.  This will force the actual copyright
+; message to be brought in from libgloss/hp-milli.s
+        .space $PRIVATE$
+        .subspa $DATA$
+        .import ___hp_free_copyright,data
+L$copyright .word ___hp_free_copyright
diff --git a/newlib/libc/machine/hppa/setjmp.S b/newlib/libc/machine/hppa/setjmp.S
new file mode 100644
index 000000000..6f3668e92
--- /dev/null
+++ b/newlib/libc/machine/hppa/setjmp.S
@@ -0,0 +1,139 @@
+/* Copyright (c) 1995 Cygnus Support.
+   All rights reserved.
+
+   Redistribution and use in source and binary forms are permitted
+   provided that the above copyright notice and this paragraph are
+   duplicated in all such forms and that any documentation,
+   advertising materials, and other materials related to such
+   distribution and use acknowledge that the software was developed
+   at Cygnus Support, Inc.  Cygnus Support, Inc. may not be used to
+   endorse or promote products derived from this software without
+   specific prior written permission.
+   THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+   IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  */
+
+/* Note I don't know an easy way to get the FP version into the
+   traditional C library and the non-FP version into the soft-float
+   library.  Maybe we'll have to have -msoft-float trigger something
+   like -DSOFT_FLOAT if this issue ever arises.  */
+
+	.SPACE $PRIVATE$
+	.SUBSPA $DATA$,QUAD=1,ALIGN=8,ACCESS=31
+	.SUBSPA $BSS$,QUAD=1,ALIGN=8,ACCESS=31,ZERO,SORT=82
+	.SPACE $TEXT$
+	.SUBSPA $LIT$,QUAD=0,ALIGN=8,ACCESS=44
+	.SUBSPA $CODE$,QUAD=0,ALIGN=8,ACCESS=44,CODE_ONLY
+	.IMPORT $global$,DATA
+	.IMPORT $$dyncall,MILLICODE
+; gcc_compiled.:
+	.SPACE $TEXT$
+	.SUBSPA $CODE$
+
+	.align 4
+	.EXPORT setjmp,ENTRY,PRIV_LEV=3,ARGW0=GR,RTNVAL=GR
+setjmp
+	.PROC
+	.CALLINFO FRAME=64,NO_CALLS,SAVE_SP,ENTRY_GR=3
+	.ENTRY
+	stwm  %r30,4(%r26)
+	stwm  %r2,4(%r26)
+	stwm  %r3,4(%r26)
+	stwm  %r4,4(%r26)
+	stwm  %r5,4(%r26)
+	stwm  %r6,4(%r26)
+	stwm  %r7,4(%r26)
+	stwm  %r8,4(%r26)
+	stwm  %r9,4(%r26)
+	stwm  %r10,4(%r26)
+	stwm  %r11,4(%r26)
+	stwm  %r12,4(%r26)
+	stwm  %r13,4(%r26)
+	stwm  %r14,4(%r26)
+	stwm  %r15,4(%r26)
+	stwm  %r16,4(%r26)
+	stwm  %r17,4(%r26)
+	stwm  %r18,4(%r26)
+	stwm  %r27,4(%r26)
+#ifdef FP
+	; jmp_buf may only have a 4 byte alignment, so handle FP stores
+	; very carefully.
+	fstds %fr12,-16(%r30)
+	ldw -16(%r30),%r28
+	stwm  %r28,4(%r26)
+	ldw -12(%r30),%r28
+	stwm  %r28,4(%r26) 
+	fstds %fr13,-16(%r30)
+	ldw -16(%r30),%r28
+	stwm  %r28,4(%r26)
+	ldw -12(%r30),%r28
+	stwm  %r28,4(%r26) 
+	fstds %fr14,-16(%r30)
+	ldw -16(%r30),%r28
+	stwm  %r28,4(%r26)
+	ldw -12(%r30),%r28
+	stwm  %r28,4(%r26) 
+	fstds %fr15,-16(%r30)
+	ldw -16(%r30),%r28
+	stwm  %r28,4(%r26)
+	ldw -12(%r30),%r28
+	stwm  %r28,4(%r26) 
+#endif
+
+	bv 0(%r2)
+	copy %r0,%r28
+	.EXIT
+	.PROCEND
+	.align 4
+	.EXPORT longjmp,ENTRY,PRIV_LEV=3,ARGW0=GR,ARGW1=GR,RTNVAL=GR
+longjmp
+	.PROC
+	.CALLINFO FRAME=64,NO_CALLS,SAVE_SP,ENTRY_GR=3
+	.ENTRY
+	ldwm 4(%r26),%r30
+	ldwm 4(%r26),%r2
+	ldwm 4(%r26),%r3
+	ldwm 4(%r26),%r4
+	ldwm 4(%r26),%r5
+	ldwm 4(%r26),%r6
+	ldwm 4(%r26),%r7
+	ldwm 4(%r26),%r8
+	ldwm 4(%r26),%r9
+	ldwm 4(%r26),%r10
+	ldwm 4(%r26),%r11
+	ldwm 4(%r26),%r12
+	ldwm 4(%r26),%r13
+	ldwm 4(%r26),%r14
+	ldwm 4(%r26),%r15
+	ldwm 4(%r26),%r16
+	ldwm 4(%r26),%r17
+	ldwm 4(%r26),%r18
+	ldwm 4(%r26),%r27
+#ifdef FP
+	ldwm 4(%r26),%r28
+	stw %r28,-16(%r30)
+	ldwm 4(%r26),%r28
+	stw %r28,-12(%r30)
+	fldds -16(%r30),%fr12
+	ldwm 4(%r26),%r28
+	stw %r28,-16(%r30)
+	ldwm 4(%r26),%r28
+	stw %r28,-12(%r30)
+	fldds -16(%r30),%fr13
+	ldwm 4(%r26),%r28
+	stw %r28,-16(%r30)
+	ldwm 4(%r26),%r28
+	stw %r28,-12(%r30)
+	fldds -16(%r30),%fr14
+	ldwm 4(%r26),%r28
+	stw %r28,-16(%r30)
+	ldwm 4(%r26),%r28
+	stw %r28,-12(%r30)
+	fldds -16(%r30),%fr15
+#endif
+	comclr,<> %r0,%r25,%r0
+	ldi 1,%r25
+	bv 0(%r2)
+	copy %r25,%r28
+	.EXIT
+	.PROCEND
diff --git a/newlib/libc/machine/hppa/strcat.S b/newlib/libc/machine/hppa/strcat.S
new file mode 100644
index 000000000..9fcdd790f
--- /dev/null
+++ b/newlib/libc/machine/hppa/strcat.S
@@ -0,0 +1,178 @@
+/*
+ *  (c) Copyright 1986 HEWLETT-PACKARD COMPANY
+ *
+ *  To anyone who acknowledges that this file is provided "AS IS"
+ *  without any express or implied warranty:
+ *      permission to use, copy, modify, and distribute this file
+ *  for any purpose is hereby granted without fee, provided that
+ *  the above copyright notice and this notice appears in all
+ *  copies, and that the name of Hewlett-Packard Company not be
+ *  used in advertising or publicity pertaining to distribution
+ *  of the software without specific, written prior permission.
+ *  Hewlett-Packard Company makes no representations about the
+ *  suitability of this software for any purpose.
+ */
+
+/* HPUX_ID:	@(#) $Revision$	*/
+/*
+ * strcat(s1, s2)
+ *
+ * Concatenate s2 on the end of s1.  S1's space must be large enough.
+ * Return s1.
+ */
+#include "DEFS.h"
+
+#define	d_addr  r26
+#define	s_addr  r25
+#define	tmp6    r24
+#define	tmp1    r19
+#define	tmp2    r20
+#define	tmp3    r21
+#define	tmp4    r22
+#define	tmp5	arg3
+#define	save	r1
+
+
+ENTRY(strcat)
+
+	comb,=		r0,s_addr,done	/* quit if s2=NULL */
+        copy      d_addr,ret0          /* The return value is the value of d_addr. DELAY SLOT*/
+
+/* First look for end of s1 (d_addr) */
+
+        extru       d_addr,31,2,tmp1   /* Extract the low two bits of the dest address. */
+	combt,=		tmp1,r0,dont_mask
+	dep		0,31,2,d_addr	/*set word alignment */
+	ldwm		4(d_addr),tmp2
+	sh3add		tmp1,r0,save	/* build mask based on tmp1 */
+	mtctl		save,11
+	zvdepi		-2,32,save
+	or		save,tmp2,tmp2
+	uxor,nbz	tmp2,r0,save
+search:
+	b,n		found_end	/* nullified under uxor conditions above and below */
+dont_mask:
+	ldwm		4(d_addr),tmp2
+	comib,tr	r0,r0,search
+	uxor,nbz	tmp2,r0,save
+
+found_end:				/* at this point d_addr points to word */
+	extru,<>	save,7,8,r0	/* following word with null */
+	addib,tr,n	-4,d_addr,begin_copy	/*set d_addr to end of s1 */
+	extru,<>	save,15,8,r0
+	addib,tr,n	-3,d_addr,begin_copy
+	extru,<>	save,23,8,r0
+	addi		-1,d_addr,d_addr
+	addi		-1,d_addr,d_addr
+
+
+begin_copy:
+
+        extru       s_addr,31,2,tmp1   /* Extract the low two bits of the source address. */
+        extru       d_addr,31,2,tmp6   /* Extract the low two bits of the destination address. */
+        sub,=       tmp6,tmp1,tmp3     /* Compute the shift quantity and don't branch if tmp6=tmp1. */
+        b           not_aligned        /* Not_aligned says that shifts Will be needed. */
+        dep         0,31,2,s_addr      /* Compute the word address of the source.  DELAY SLOT. */
+/* aligned */
+
+	combt,=		tmp6,r0,skip_mask
+        ldwm        	4(0,s_addr),tmp1   /* tmp1 = *s_addr   s_addr += 4 (DELAY SLOT) */
+	sh3add		tmp6,r0,save
+	mtctl		save,r11
+	zvdepi		-2,32,save
+	or		save,tmp1,tmp1
+	uxor,nbz	tmp1,r0,save
+	b,n		first_null	/* special case: null in first word */
+	b,n		skip_mask2
+
+chunks:
+	b,n		null_found	/* delay slot for uxor below */
+
+skip_mask2:
+	stbys,b,m	tmp1,4(d_addr)
+	ldwm		4(s_addr),tmp1
+skip_mask:
+	comib,tr	0,0,chunks
+	uxor,nbz	tmp1,r0,save
+
+/* Begin non_aligned code.  */
+
+not_aligned:
+        sh3add,>=       tmp3,r0,tmp4        /* compute the shift amt.and skip load if tmp6 > tmp1. */
+        ldwm         	4(0,s_addr),tmp1    /* load up the first word from the source. tmp1 = *s_addr++ */
+        ldwm        	4(0,s_addr),tmp2    /* get either first or second word from source.  */
+	combt,=		tmp6,r0,chunk2      /* don't mask if whole word is valid */
+        mtctl        	tmp4,11             /* load the shift count into cr11 = shift count register. */
+        vshd        	tmp1,tmp2,tmp3      /* position data !  (delay slot) */
+	sh3add		tmp6,r0,save  	    /* setup r1 */
+	mtctl		save,r11	    /* set-up cr11 for mask */
+	zvdepi		-2,32,save
+	or		save, tmp3, tmp3
+	uxor,nbz	tmp3,r0,save
+	b,n		first_null2
+	b		did_mask
+        mtctl        	tmp4,11            /* re-load the shift count into cr11 */
+
+chunk2:
+	vshd		tmp1,tmp2,tmp3
+	uxor,nbz	tmp3, r0, save
+	b,n		null_found
+did_mask:
+        stbys,b,m   	tmp3,4(0,d_addr)    /* store !  */
+
+        ldwm        	4(0,s_addr),tmp1    /* get next word !  */
+        vshd        	tmp2,tmp1,tmp3      /* position data !  */
+	uxor,nbz	tmp3, r0, save
+	b,n		null_found
+	stwm		tmp3,4(d_addr)
+	comib,tr	0,0,chunk2
+	ldwm		4(s_addr),tmp2
+
+
+null_found:				/* adjust d_addr and store final word */
+
+	extru,<>	save,7,8,r0
+	addib,tr,n	1,d_addr,store_final
+	extru,<>	save,15,8,r0
+	addib,tr,n	2,d_addr,store_final
+	extru,<> 	save,23,8,r0
+	addib,tr	3,d_addr,store_final2
+	bv		0(r2)
+	stw		save,0(d_addr)
+
+store_final:
+	bv		0(r2)
+store_final2:
+	stbys,e		save,0(d_addr) 	/* delay slot */
+
+first_null:			/* null found in first word of aligned (wrt d_addr) */
+	addi		-4,s_addr,s_addr
+	ldbx		tmp6(s_addr),tmp4
+	add		tmp6,s_addr,s_addr
+	comib,=		0,tmp4,done
+	stbs,ma		tmp4,1(d_addr)
+	ldbs		1(s_addr),tmp4
+	comib,=		0,tmp4,done
+	stbs,ma		tmp4,1(d_addr)
+	bv		0(r2)		/* done */
+	stbs		0,0(d_addr)
+
+first_null2:	/* null found in first word of non-aligned (wrt d_addr) */
+	addibt,=	-1,tmp6,check3	/* check last 3 bytes of word */
+	extru   	save,15,8,tmp4
+	addibt,=,n	-1,tmp6,check2	/* check last 2 bytes */
+	bv		0(r2)
+	stbys,b		save, 0(d_addr)
+
+check3:
+	combt,=		tmp4,r0,done
+	stbs,ma		tmp4,1(d_addr)
+check2:
+	extru,<>	save,23,8,tmp4
+	bv		0(r2)
+	stbs,ma		tmp4,1(d_addr)
+	bv		0(r2)
+	stbs		r0,0(d_addr)
+
+done:
+EXIT(strcat)
diff --git a/newlib/libc/machine/hppa/strcmp.S b/newlib/libc/machine/hppa/strcmp.S
new file mode 100644
index 000000000..007a64849
--- /dev/null
+++ b/newlib/libc/machine/hppa/strcmp.S
@@ -0,0 +1,282 @@
+/*
+ *  (c) Copyright 1986 HEWLETT-PACKARD COMPANY
+ *
+ *  To anyone who acknowledges that this file is provided "AS IS"
+ *  without any express or implied warranty:
+ *      permission to use, copy, modify, and distribute this file
+ *  for any purpose is hereby granted without fee, provided that
+ *  the above copyright notice and this notice appears in all
+ *  copies, and that the name of Hewlett-Packard Company not be
+ *  used in advertising or publicity pertaining to distribution
+ *  of the software without specific, written prior permission.
+ *  Hewlett-Packard Company makes no representations about the
+ *  suitability of this software for any purpose.
+ */
+
+/*
+
+	strcmp
+
+	Jerry Huck
+	Edgar Circenis
+
+*/
+/* 
+ * strcmp(s1, s2)
+ *
+ * returns integer: < 0 iff s1 lexicographically less than s2
+ * 		    > 0 iff s1 lexicographically greater than s2
+ * 		    = 0 iff s1 lexicographically equal to s2
+ */
+
+#include "DEFS.h"
+
+#define s1	 26
+#define s2	 25
+#define tmp1     19
+#define s2word   20
+#define tmp3     21
+#define tmp7     22
+#define s1word	 23
+#define save	  1
+#define tmp6	 24
+#define tmp5	 28
+
+ENTRY(strcmp)
+	comb,=,n   s1,s2,samestring
+	comib,=,n  0,s1,s1isnull
+        comib,=,n  0,s2,s2isnull
+/* Hope for word alignment.  Pick up low two bits of each adress */
+        extru,<>   s1,31,2,tmp1
+        ldwm       4(s1),s1word
+        dep,=      s2,29,2,tmp1
+        b,n        case_analysis
+
+/* Start looping until null is found in s1 or they mis-compare */
+loop:
+        ldwm       4(s2),s2word
+loop_plus:
+        uxor,nbz   s1word,r0,r0   /* Null in this? */
+        b,n        nullins1
+        comb,=,n   s1word,s2word,loop
+        ldwm       4(s1),s1word
+
+/* The words do not compare equal and s1 does not have a null.
+   Need to treat words as unsigned and generate either a positive
+   or negative return value */
+wordcomparereturn:
+        comclr,>>  s1word,s2word,ret0    /*Set ret0 to 0 and skip if greater*/
+        ldi        -2,ret0           /*Set ret0 to -2 when less */
+        bv         r0(rp)
+        addi       1,ret0,ret0           /*Fix return value to be -1 or +1 */
+
+/* s1 has a null.  s2 has not been checked. */
+nullins1:
+        /*If s2 has no nulls this is simple, but assume that it might
+          and fix up s1 to allow the word comparision to work by
+          scanning s1 and duplicating all the bytes in s2 below that byte into
+          the remainder of s1.  A remainder only exists if the zero byte
+          is found in the upper three bytes */
+        extru,<>   s1word,7,8,r0         /*in the first byte? */
+        dep,tr     s2word,31,24,s1word   /*copy low 3 bytes of *s2 into *s1 */
+        extru,<>   s1word,15,8,r0         /*in the second byte? */
+        dep,tr     s2word,31,16,s1word   /*copy low 2 bytes of *s2 into *s1 */
+        extru,<>   s1word,23,8,r0         /*in the third byte? */
+        dep        s2word,31,8,s1word   /*copy low 1 byte of *s2 into *s1 */
+        /* Do the normal unsigned compare and return */
+        comclr,<>  s1word,s2word,ret0    /*Set ret0 to 0 and skip if not equal */
+	bv,n	   r0(rp)
+        comclr,>>  s1word,s2word,ret0    /*Set ret0 to 0 and skip if greater*/
+        ldi        -2,ret0           /*Set ret0 to -2 when less */
+        bv         r0(rp)
+        addi       1,ret0,ret0           /*Fix return value to be -1 or +1 */
+
+/* s1 and s2 are the same string and therefore equal */
+samestring:
+        bv      r0(rp)
+        copy    r0,ret0
+/* s1 is null.  Treat as string of nulls.  Therefore return
+   the negative of s2's first byte.  s2 cannot be zero. */
+s1isnull:
+	ldbs	0(0,s2),ret0
+        bv      r0(rp)
+	sub	0,ret0,ret0
+/* s2 is null.  Treat as string of nulls.  Therefore return 
+   s1's first byte.  s1 cannot be zero. */
+s2isnull:
+        bv      r0(rp)
+	ldbs	0(0,s1),ret0
+
+case_analysis:
+	blr	tmp1,r0
+	nop
+
+	/*
+	   Case statement for non-aligned cases (we've already
+	   checked the aligned case.
+	   NOTE: for non-aligned cases, the absolute shift value
+	   gets loaded into tmp3.
+	*/
+
+				/* S2 S1 */
+	nop			/* 00 00 can't happen */
+	nop
+	b	shifts2		/* 00 01 */
+	ldi	8,tmp3		/* load shift count (delay slot) */
+	b	shifts2		/* 00 10 */
+	ldi	16,tmp3		/* load shift count (delay slot) */
+	b	shifts2		/* 00 11 */
+	ldi	24,tmp3		/* load shift count (delay slot) */
+	b	shifts1_0	/* 01 00 */
+	ldi	8,tmp3		/* load shift count (delay slot) */
+	b	eq_align1	/* 01 01 */
+	ldbs,ma	1(s1),s1word
+	b	shifts2		/* 01 10 */
+	ldi	8,tmp3		/* load shift count (delay slot) */
+	b	shifts2		/* 01 11 */
+	ldi	16,tmp3		/* load shift count (delay slot) */
+	b	shifts1_0	/* 10 00 */
+	ldi	16,tmp3		/* load shift count (delay slot) */
+	b	shifts1		/* 10 01 */
+	ldi	8,tmp3		/* load shift count (delay slot) */
+	b	eq_align2	/* 10 10 */
+	ldhs,ma	2(s1),s1word
+	b	shifts2		/* 10 11 */
+	ldi	8,tmp3		/* load shift count (delay slot) */
+	b	shifts1_0	/* 11 00 */
+	ldi	24,tmp3		/* load shift count (delay slot) */
+	b	shifts1		/* 11 01 */
+	ldi	16,tmp3		/* load shift count (delay slot) */
+	b	shifts1		/* 11 10 */
+	ldi	8,tmp3		/* load shift count (delay slot) */
+	ldbs,ma	1(s1),s1word	/* 11 11 */
+	ldbs,ma 1(s2),s2word
+	sub,=	s1word,s2word,ret0	/* if not equal, we can return now */
+	bv,n	r0(rp)
+	comclr,<>	s1word,r0,ret0
+	bv,n	r0(rp)			
+	b	loop			/* fall into main loop */
+	ldwm	4(s1),s1word
+
+eq_align1:
+	ldbs,ma 1(s2),s2word
+	sub,=	s1word,s2word,ret0	/* if not equal, we can return now */
+	bv,n	r0(rp)
+	comclr,<>	s1word,r0,ret0
+	bv,n	r0(rp)			
+	/* fall through to half-word aligned case */
+	ldhs,ma	2(s1),s1word		/* load next halfword */
+eq_align2:
+	ldhs,ma	2(s2),s2word		/* load next halfword */
+	/* form the mask: 0xffff0000 and mask leading nulls in s1word and s2word
+	   so that we can fall into the main loop with word aligned data */
+	ldi	16,save	
+	mtctl	save,r11
+	zvdepi	-2,32,save
+	or	save,s1word,s1word
+	b	loop_plus		/* fall into main loop */
+	or	save,s2word,s2word
+
+/* s2's alignment is greater than s1's alignment, so we will shift s1 */
+shifts1_0:
+	addi	-4,s1,s1		/* fix up s1 due to earlier read */
+shifts1:
+        extru   s1,31,2,tmp1
+        extru   s2,31,2,tmp5
+	dep	r0,31,2,s1		/* Compute word address of s1 */
+	dep	r0,31,2,s2		/* Compute word address of s2 */
+	ldwm	4(s1),s1word		/* get first word of s1 */
+	ldwm	4(s2),s2word		/* get first word of s2 */
+	combt,=,n	r0,tmp1,masks2	/* Do we need to mask beginning of s1 */
+	sh3add	tmp1,r0,save		/* save now has number of bits to mask */
+	mtctl	save,r11
+	zvdepi	-2,32,save		/* load save with proper mask */
+	or	save,s1word,s1word
+masks2:
+	sh3add	tmp5,r0,save		/* save now has number of bits to mask */
+	mtctl	save,r11
+	zvdepi	-2,32,save		/* load save with proper mask */
+	or	save,s2word,s2word
+	ldi	-1,tmp7			/* load tmp7 with 0xffffffff */
+	mtctl	tmp3,r11		/* Move shift amount to CR11 */
+more:	uxor,nbz	s1word,r0,r0	/* Is there a null in s1? */
+	b	ends1
+	vshd	tmp7,s1word,save
+	combf,=,n	save,s2word,cmps1
+	ldwm	4(s1),tmp7
+	ldwm	4(s2),s2word
+	uxor,nbz	tmp7,r0,r0	/* is there a null in s1? */
+	b	ends1_0
+	vshd	s1word,tmp7,save
+	combf,=,n	save,s2word,cmps1
+	ldwm	4(s1),s1word
+	b	more
+	ldwm	4(s2),s2word
+
+cmps1:	movb,tr		save,s1word,wordcomparereturn
+	nop
+
+ends1_0:
+	copy	tmp7,s1word			/* move tmp7 to s1word */
+ends1:
+	combf,=,n	save,s2word,nullins1	/* branch if no match */
+	copy	save,s1word			/* delay slot */
+/* At this point, we know that we've read a null */
+/* from s1, so we can't read more from s1 */
+	uxor,nbz	save,r0,r0		/* are the strings equal? */
+	b,n	samestring
+	vshd	s1word,r0,s1word
+	b	nullins1
+	ldwm	4(s2),s2word
+
+/* s1's alignment is greater than s2's alignment, so we will shift s2 */
+shifts2:
+        extru   s1,31,2,tmp1
+        extru   s2,31,2,tmp5
+	dep	r0,31,2,s1		/* Compute word address of s1 */
+	dep	r0,31,2,s2		/* Compute word address of s2 */
+	ldwm	4(s2),s2word		/* get first word of s2 */
+	ldwm	4(s1),s1word		/* get first word of s1 */
+	combt,=,n	r0,tmp5,masks1	/* Do we need to mask beginning of s2 */
+	sh3add	tmp5,r0,save		/* save now has number of bits to mask */
+	mtctl	save,r11
+	zvdepi	-2,32,save		/* load save with proper mask */
+	or	save,s2word,s2word
+masks1:
+	sh3add	tmp1,r0,save		/* save now has number of bits to mask */
+	mtctl	save,r11
+	zvdepi	-2,32,save		/* load save with proper mask */
+	or	save,s1word,s1word
+	ldi	-1,tmp7			/* load tmp7 with 0xffffffff */
+	mtctl	tmp3,r11		/* Move shift amount to CR11 */
+more1:	uxor,nbz	s2word,r0,r0	/* is there a null in s2? */
+	b	ends2
+	vshd	tmp7,s2word,save
+	combf,=,n	s1word,save,cmps2
+	ldwm	4(s2),tmp7
+	ldwm	4(s1),s1word
+	uxor,nbz	tmp7,r0,r0	/* is there a null in s2? */
+	b	ends2_0
+	vshd	s2word,tmp7,save
+	combf,=,n	s1word,save,cmps2
+	ldwm	4(s2),s2word
+	b	more1
+	ldwm	4(s1),s1word
+
+cmps2:	movb,tr		save,s2word,wordcomparereturn
+	nop
+
+ends2_0:
+	copy	tmp7,s2word			/* move tmp7 to s2word */
+ends2:
+	combf,=,n	s1word,save,nullins1	/* branch if no match */
+	copy	save,s2word			/* delay slot */
+/* At this point, we know that we've read a null */
+/* from s2, so we can't read more from s2 */
+	uxor,nbz	save,r0,r0		/* are the strings equal? */
+	b,n	samestring
+	vshd	s2word,r0,s2word
+	b	nullins1
+	ldwm	4(s1),s1word
+
+EXIT(strcmp)
diff --git a/newlib/libc/machine/hppa/strcpy.S b/newlib/libc/machine/hppa/strcpy.S
new file mode 100644
index 000000000..3068cd5e1
--- /dev/null
+++ b/newlib/libc/machine/hppa/strcpy.S
@@ -0,0 +1,285 @@
+/*
+ *  (c) Copyright 1986 HEWLETT-PACKARD COMPANY
+ *
+ *  To anyone who acknowledges that this file is provided "AS IS"
+ *  without any express or implied warranty:
+ *      permission to use, copy, modify, and distribute this file
+ *  for any purpose is hereby granted without fee, provided that
+ *  the above copyright notice and this notice appears in all
+ *  copies, and that the name of Hewlett-Packard Company not be
+ *  used in advertising or publicity pertaining to distribution
+ *  of the software without specific, written prior permission.
+ *  Hewlett-Packard Company makes no representations about the
+ *  suitability of this software for any purpose.
+ */
+
+/*
+	A faster strcpy.
+
+	by
+
+	Jerry Huck (aligned case)
+	Daryl Odnert (equal-alignment case)
+	Edgar Circenis (non-aligned case)
+*/
+/*
+ * strcpy(s1, s2)
+ *
+ * Copy string s2 to s1.  s1 must be large enough.
+ * return s1
+ */
+
+#include "DEFS.h"
+
+#define	d_addr		r26
+#define	s_addr		r25
+#define	tmp6		r24
+#define	tmp1		r19
+#define evenside	r19
+#define	tmp2		r20
+#define oddside		r20
+#define	tmp3		r21
+#define	tmp4		r22
+#define	tmp5		arg3
+#define	save		r1
+
+
+ENTRY(strcpy)
+/* Do some quick alignment checking on and fast path both word aligned */
+        extru,<>   s_addr,31,2,tmp6    /*Is source word aligned? */
+        ldwm       4(0,s_addr),oddside /*Assume yes and guess that it
+                                          is double-word aligned. */
+        dep,=      d_addr,29,2,tmp6    /*Is target word aligned? */
+        b          case_analysis
+	copy       d_addr,ret0
+/* Both are aligned.  First source word already loaded assuming that
+   source was oddword aligned.  Fall through (therefore fastest) code
+   shuffles the registers to join the main loop */
+bothaligned:
+	bb,>=    s_addr,29,twoatatime  /*Branch if source was odd aligned*/
+	uxor,nbz oddside,r0,save
+
+/* Even aligned source.  save holds that operand.
+   Do one iteration of the main copy loop juggling the registers to avoid
+   one copy. */
+	b,n	 nullfound
+	ldwm     4(s_addr),oddside
+	stwm     save,4(d_addr)
+	uxor,nbz oddside,r0,save
+	b,n      nullfound
+        ldwm     4(s_addr),evenside
+        stwm     oddside,4(d_addr)
+        uxor,nbz evenside,r0,save
+        b,n      nullfound
+        ldwm     4(s_addr),oddside
+
+/* Main loop body.  Entry expects evenside still to be stored, oddside
+   just loaded. */
+loop:
+        stwm     evenside,4(d_addr)
+        uxor,nbz oddside,r0,save
+
+/* mid loop entry */
+twoatatime:
+        b,n      nullfound
+        ldwm     4(s_addr),evenside
+        stwm     oddside,4(d_addr)
+        uxor,sbz evenside,r0,save
+        b        loop
+        ldwm     4(s_addr),oddside
+
+/* fall through when null found in evenside.  oddside actually loaded */
+nullfound:				/* adjust d_addr and store final word */
+
+	extru,<>	save,7,8,r0         /* pick up leftmost byte */
+	addib,tr,n	1,d_addr,store_final
+	extru,<>	save,15,8,r0
+	addib,tr,n	2,d_addr,store_final
+	extru,<> 	save,23,8,r0
+	addib,tr	3,d_addr,store_final2
+	bv		0(rp)
+	stw		save,0(d_addr)
+
+store_final:
+	bv		0(rp)
+store_final2:
+	stbys,e		save,0(d_addr) 	/* delay slot */
+	
+case_analysis:
+
+        blr         tmp6,r0
+        nop
+
+	/* NOTE: the delay slots for the non-aligned cases load a   */
+	/* shift quantity which is TGT-SRC into tmp3.               */
+        /* Note also, the case for both strings being word aligned  */
+	/* is already checked before the BLR is executed, so that   */
+	/* case can never occur.                                    */
+
+                                       /* TGT SRC */
+        nop                            /* 00  00  can't happen */
+        nop
+        b           neg_aligned_copy   /* 00  01  */
+	ldi         -1,tmp3            /* load shift quantity. delay slot */
+        b           neg_aligned_copy   /* 00  10  */
+	ldi         -2,tmp3            /* load shift quantity. delay slot */
+        b           neg_aligned_copy   /* 00  11  */
+	ldi         -3,tmp3            /* load shift quantity. delay slot */
+        b           pos_aligned_copy0  /* 01  00  */
+	ldi         1,tmp3            /* load shift quantity. delay slot */
+        b           equal_alignment_1  /* 01  01  */
+        ldbs,ma     1(s_addr),tmp1
+        b           neg_aligned_copy   /* 01  10  */
+	ldi         -1,tmp3            /* load shift quantity. delay slot */
+        b           neg_aligned_copy   /* 01  11  */
+	ldi         -2,tmp3            /* load shift quantity. delay slot */
+        b           pos_aligned_copy0  /* 10  00  */
+	ldi         2,tmp3            /* load shift quantity. delay slot */
+        b           pos_aligned_copy   /* 10  01  */
+	ldi         1,tmp3            /* load shift quantity. delay slot */
+        b           equal_alignment_2  /* 10  10  */
+        ldhs,ma     2(s_addr),tmp1
+        b           neg_aligned_copy   /* 10  11  */
+	ldi         -1,tmp3            /* load shift quantity. delay slot */
+        b           pos_aligned_copy0  /* 11  00  */
+	ldi         3,tmp3            /* load shift quantity. delay slot */
+        b           pos_aligned_copy   /* 11  01  */
+	ldi         2,tmp3            /* load shift quantity. delay slot */
+        b           pos_aligned_copy   /* 11  10  */
+	ldi         1,tmp3            /* load shift quantity. delay slot */
+        ldbs,ma     1(s_addr),tmp1     /* 11  11  */
+        comiclr,<>  r0,tmp1,r0
+        bv          0(rp)              /* return if 1st byte was null */
+        stbs,ma     tmp1,1(d_addr)     /* store a byte to dst string  */
+        b           bothaligned       /* can now goto word_aligned   */
+        ldwm        4(s_addr),oddside     /* load next word of source    */
+
+equal_alignment_1:
+        comiclr,<>  r0,tmp1,r0      /* nullify next if tmp1 <> 0  */
+        bv          0(rp)           /* return if null byte found  */
+        stbs,ma     tmp1,1(d_addr)  /* store a byte to dst string */
+        ldhs,ma     2(s_addr),tmp1  /* load next halfword         */
+equal_alignment_2:
+        extru,<>    tmp1,23,8,tmp6  /* look at left byte of halfword */
+        bv          0(rp)           /* return if 1st byte was null */
+        stbs,ma     tmp6,1(d_addr)
+        extru,<>    tmp1,31,8,r0
+        bv          0(rp)           /* return if 2nd byte was null */
+        stbs,ma     tmp1,1(d_addr)
+        b           bothaligned
+        ldwm        4(s_addr),oddside  /* load next word              */
+
+/* source and destination are not aligned, so we do it the hard way. */
+
+/* target alignment is greater than source alignment */
+pos_aligned_copy0:
+	addi		-4,s_addr,s_addr
+pos_aligned_copy:
+        extru       d_addr,31,2,tmp6   /* Extract low 2 bits of the dest addr */
+        extru       s_addr,31,2,tmp1   /* Extract low 2 bits of the src addr */
+        dep         r0,31,2,s_addr     /* Compute word address of the source. */
+        sh3add		tmp3,r0,tmp4        /* compute shift amt */
+        ldwm        	4(0,s_addr),tmp2    /* get 1st source word */
+	sh3add		tmp1,r0,save  	    /* setup mask shift amount */
+	mtctl		save,r11	    /* set-up cr11 for mask */
+	zvdepi		-2,32,save	    /* create mask */
+	or		save,tmp2,tmp2	    /* mask unused bytes in src */
+	ldi		-1,tmp1		    /* load tmp1 with 0xffffffff */
+        mtctl        	tmp4,r11            /* shift count -> shift count reg */
+        vshd        	tmp1,tmp2,tmp3      /* position data ! */
+	uxor,nbz	tmp3,r0,save
+	b,n		first_null
+	uxor,nbz	tmp2,r0,save
+	b		nullfound1
+        mtctl        	tmp4,r11            /* re-load shift cnt (delay slot) */
+	b		loop_entry
+        ldwm        	4(0,s_addr),tmp1    /* get next word. delay slot */
+
+neg_aligned_copy:
+        extru       d_addr,31,2,tmp6   /* Extract low 2 bits of the dest addr */
+	extru	    s_addr,31,2,tmp2   /* Extract low 2 bits of the src addr */
+        dep         r0,31,2,s_addr     /* Compute word address of the source. */
+        sh3add		tmp3,r0,tmp4        /* compute shift amt */
+        ldwm         	4(0,s_addr),tmp1    /* load first word from source. */
+/* check to see if next word can be read safely */
+	sh3add		tmp2,r0,save
+        mtctl        	save,r11            /* shift count -> shift count reg */
+	zvdepi		-2,32,save
+	or		save, tmp1, tmp1
+	uxor,nbz	tmp1,r0,save	    /* any nulls in first word? */
+	b		first_null0
+	mtctl		tmp4,r11
+        ldwm        	4(0,s_addr),tmp2    /* load second word from source */
+	combt,=		tmp6,r0,chunk1      /* don't mask if whole word valid */
+        vshd        	tmp1,tmp2,tmp3      /* position data ! */
+	sh3add		tmp6,r0,save  	    /* setup r1 */
+	mtctl		save,r11	    /* set-up cr11 for mask */
+	zvdepi		-2,32,save
+	or		save, tmp3, tmp3
+	uxor,nbz	tmp3,r0,save
+	b,n		first_null
+	uxor,nbz	tmp2,r0,save
+	b		nullfound1
+        mtctl        	tmp4,r11            /* re-load shift cnt (delay slot) */
+	b		loop_entry
+        ldwm        	4(0,s_addr),tmp1    /* get next word. delay slot */
+
+chunk1:
+	uxor,nbz	tmp2,r0,save
+	b		nullfound0
+	vshd		tmp1,tmp2,tmp3
+did_mask:
+        ldwm        	4(0,s_addr),tmp1    /* get next word !  */
+loop_entry:
+        stbys,b,m   	tmp3,4(0,d_addr)    /* store !  */
+
+	uxor,nbz	tmp1, r0, save
+	b		nullfound2
+        vshd        	tmp2,tmp1,tmp3      /* position data !  */
+	ldwm		4(s_addr),tmp2
+	stwm		tmp3,4(d_addr)
+	uxor,sbz	tmp2,r0,save
+	b		did_mask
+nullfound0:
+	vshd		tmp1,tmp2,tmp3	    /* delay slot */
+	uxor,nbz	tmp3,r0,save
+	b,n		nullfound
+nullfound1:
+	stbys,b,m	tmp3,4(0,d_addr)
+	b		nullfound
+	vshd		tmp2,r0,save	    /* delay slot */
+
+nullfound2:
+	uxor,nbz	tmp3,r0,save
+	b,n		nullfound
+	stwm		tmp3,4(d_addr)
+	b		nullfound
+	/* notice that delay slot is in next routine */
+
+first_null0:	/* null found in first word of non-aligned (wrt d_addr) */
+	vshd		tmp1,r0,save	    /* delay slot */
+	combt,=		tmp6,r0,check4
+	extru		save,7,8,tmp4
+first_null:
+	addibt,=	-1,tmp6,check3	/* check last 3 bytes of word */
+	extru   	save,15,8,tmp4
+	addibt,=,n	-1,tmp6,check2	/* check last 2 bytes */
+	bv		0(rp)		/* null in last byte--store and exit */
+	stbys,b		save, 0(d_addr)
+
+check4:
+	combt,=		tmp4,r0,done
+	stbs,ma		tmp4,1(d_addr)
+	extru,<>	save,15,8,tmp4
+check3:
+	combt,=		tmp4,r0,done
+	stbs,ma		tmp4,1(d_addr)
+check2:
+	extru,<>	save,23,8,tmp4
+	bv		0(rp)
+	stbs,ma		tmp4,1(d_addr)
+	bv		0(rp)
+	stbs		r0,0(d_addr)
+
+done:    
+EXIT(strcpy)
diff --git a/newlib/libc/machine/hppa/strlen.S b/newlib/libc/machine/hppa/strlen.S
new file mode 100644
index 000000000..12e9ef2a9
--- /dev/null
+++ b/newlib/libc/machine/hppa/strlen.S
@@ -0,0 +1,79 @@
+/*
+ *  (c) Copyright 1986 HEWLETT-PACKARD COMPANY
+ *
+ *  To anyone who acknowledges that this file is provided "AS IS"
+ *  without any express or implied warranty:
+ *      permission to use, copy, modify, and distribute this file
+ *  for any purpose is hereby granted without fee, provided that
+ *  the above copyright notice and this notice appears in all
+ *  copies, and that the name of Hewlett-Packard Company not be
+ *  used in advertising or publicity pertaining to distribution
+ *  of the software without specific, written prior permission.
+ *  Hewlett-Packard Company makes no representations about the
+ *  suitability of this software for any purpose.
+ */
+
+/* HPUX_ID = "@(#) $Revision$" */
+/* strlen(s): Return length of string s */
+
+#define start   arg0
+#define end     ret0
+#define tmp1    arg1
+#define tmp2    arg2
+
+#include "DEFS.h"
+
+ENTRY(strlen)
+        movb,=,n        start,end,$null_ptr
+        depi            0,31,2,end
+        comb,<>         start,end,$not_aligned
+        ldws,ma         4(end),tmp1
+        comib,tr        0,0,$loop       /* avoid INDIGO two register interlock */
+        uxor,nbz        0,tmp1,0
+$not_aligned:
+        /*
+        ;       Tricky code.  The problem is that the value of of the word
+        ;       including the start of the string has some garbage bytes that
+        ;       may be 0.  We don't want them to stop the string scan.  So
+        ;       we make those bytes non-zero (and any old non-zero value
+        ;       will do).  Notice that the end pointer has been rounded
+        ;       down to a word boundary, and then incremented to the next
+        ;       word by the time we get here.  Therefore, (start-end) has
+        ;       one of the values (-3, -2, or -1).  Use uaddcm to do the
+        ;       subtraction (instead of sub), and the result will be
+        ;       (-4, -3, or -2).  Multiply this by 8, and put into the
+        ;       shift register (which truncates to the last 5 bits) and
+        ;       the value will be (0, 8, or 16).  Use this as a bit position,
+        ;       and drop a mask down into tmp1.  All the garbage bytes will
+        ;       have at least 1 bit affected by the vdepi, so all the garbage
+        ;       in this first word will be non-zero garbage.
+        */
+        uaddcm          start,end,tmp2  /*  tmp2 <- {  -4,  -3,  -2 } */
+        sh3add          tmp2,0,tmp2     /*  tmp2 <- { -32, -24, -16 } */
+        mtsar           tmp2            /*  sar  <- {   0,   8,  16 } */
+        vdepi           -1,32,tmp1
+        uxor,nbz        0,tmp1,0
+$loop:
+        b,n             $end_loop
+        ldws,ma         4(end),tmp1
+        comib,tr        0,0,$loop       /* avoid INDIGO two register interlock */
+        uxor,nbz        0,tmp1,0
+$end_loop:
+        /*       adjust the end pointer to one past the end of the string */
+        extru,<>        tmp1,7,8,0
+        addib,tr,n      -3,end,$out
+        extru,<>        tmp1,15,8,0
+        addib,tr,n      -2,end,$out
+        extru,<>        tmp1,23,8,0
+        addi            -1,end,end
+$out:
+        bv              0(rp)
+        /*
+        ;       tricky code.  the end pointer is just beyond the terminating
+        ;       null byte, so the length is (end-start-1).  use uaddcm
+        ;       to do this in 1 instruction
+        */
+        uaddcm          end,start,ret0
+
+$null_ptr:
+EXIT(strlen)
diff --git a/newlib/libc/machine/hppa/strncat.S b/newlib/libc/machine/hppa/strncat.S
new file mode 100644
index 000000000..04bd156c9
--- /dev/null
+++ b/newlib/libc/machine/hppa/strncat.S
@@ -0,0 +1,238 @@
+/*
+ *  (c) Copyright 1986 HEWLETT-PACKARD COMPANY
+ *
+ *  To anyone who acknowledges that this file is provided "AS IS"
+ *  without any express or implied warranty:
+ *      permission to use, copy, modify, and distribute this file
+ *  for any purpose is hereby granted without fee, provided that
+ *  the above copyright notice and this notice appears in all
+ *  copies, and that the name of Hewlett-Packard Company not be
+ *  used in advertising or publicity pertaining to distribution
+ *  of the software without specific, written prior permission.
+ *  Hewlett-Packard Company makes no representations about the
+ *  suitability of this software for any purpose.
+ */
+
+/*HPUX_ID:	@(#) $Revision$	*/
+/* strncat(s1,s2,n) : concatonate at most n characters from s2 onto s1 */
+
+#include "DEFS.h"
+
+#define	d_addr  r26
+#define	s_addr  r25
+#define	count   r24
+#define	tmp1    r19
+#define	tmp2    r20
+#define	tmp3    r21
+#define	tmp4    r22
+#define	tmp5	arg3
+#define tmp6	r31
+#define	save	r1
+#define tmp7	ret1	/* source offset-- reset to orig source addr if not aligned */
+
+
+ENTRY(strncat)
+
+	comb,=		r0,s_addr,quit	/* quit if s2=NULL */
+        copy      d_addr,ret0          /* The return value is the value of d_addr. DELAY SLOT*/
+
+/* First look for end of s1 (d_addr) */
+
+        extru       d_addr,31,2,tmp1   /* Extract the low two bits of the dest address. */
+	combt,=		tmp1,r0,dont_mask
+	dep		0,31,2,d_addr	/*set word alignment */
+	ldwm		4(d_addr),tmp2
+	sh3add		tmp1,r0,save	/* build mask based on tmp1 */
+	mtctl		save,11
+	zvdepi		-2,32,save
+	or		save,tmp2,tmp2
+	uxor,nbz	tmp2,r0,save
+search:
+	b,n		found_end	/* nullified under uxor conditions above and below */
+dont_mask:
+	ldwm		4(d_addr),tmp2
+	comib,tr	r0,r0,search
+	uxor,nbz	tmp2,r0,save
+
+found_end:				/* at this point d_addr points to word */
+	extru,<>	save,7,8,r0	/* following word with null */
+	addib,tr,n	-4,d_addr,begin_copy	/*set d_addr to end of s1 */
+	extru,<>	save,15,8,r0
+	addib,tr,n	-3,d_addr,begin_copy
+	extru,<>	save,23,8,r0
+	addi		-1,d_addr,d_addr
+	addi		-1,d_addr,d_addr
+
+
+begin_copy:
+        addibt,<,n  -4,count,byteloop     /* If count is <= 4 don't get fancy.*/
+
+        extru       s_addr,31,2,tmp4   /* Extract the low two bits of the source address.*/
+        extru       d_addr,31,2,tmp5   /* Extract the low two bits of the destination address.*/
+        add         count,tmp5,count   /* pre increment the count by the byte address so that the count is*/
+	copy		s_addr,tmp6	/* save original s_addr in case we find null in first word */
+	copy	     s_addr, tmp7	/* save s_addr in case we find null before first store */
+        comb,<>       tmp5,tmp4,not_aligned /* branch if tmp5<>tmp4. */
+        dep         0,31,2,s_addr      /* Compute the word address of the source.  DELAY SLOT.*/
+/* aligned*/
+	combt,=		tmp5,r0,skip_mask
+        ldwm        4(0,s_addr),tmp1   /* tmp1 = *s_addr   s_addr += 4 (DELAY SLOT)*/
+	sh3add		tmp5,r0,save	/* compute mask in save*/
+	mtctl		save,11
+	zvdepi		-2,32,save
+	or		save,tmp1,tmp1  /* or mask with data*/
+	uxor,nbz	tmp1,r0,save 	/* check for null*/
+	b,n		null1
+	addibt,<	-4,count,back_porch
+        stbys,b,m   tmp1,4(0,d_addr)   /* store word (delay slot)*/
+
+chunks:
+	ldwm		4(0,s_addr),tmp1 /* get a word*/
+
+skip_mask:
+	uxor,nbz	tmp1,r0,save 	/* check for null*/
+	b,n		align_null1
+	addibf,<	-4,count,chunks
+        stbys,b,m   tmp1,4(0,d_addr)   /* store word (delay slot)*/
+
+back_porch:				   /* last word to store*/
+         addibt,=,n  4,count,done       /* if count = 0 we're, of course, done !*/
+         ldws        0(s_addr),tmp1     /* load up the back_porch*/
+	 sh3add		count,r0, save	/* setup right mask based on count*/
+	 mtctl		save,r11
+	 zvdepi		-2,32,save	/*save now has left-hand mask*/
+	 uaddcm		r0,save,save	/*form right hand mask */
+	 or		tmp1,save,tmp1	/*and insert data*/
+	 uxor,nbz	tmp1,r0,save	/* check for null*/
+	 b,n 		null2
+         add         d_addr,count,d_addr/* final store address  is +1 too high !*/
+	 b		done
+	 stbys,e	tmp1,0(d_addr)	/* done */
+
+/* Begin non_aligned code. */
+not_aligned:
+        sub,>=       tmp5,tmp4,tmp6     /* compute the shift amt.and skip load if tmp5 > tmp4.*/
+        ldwm         4(0,s_addr),tmp1   /* load up the first word from the source. tmp1 = *s_addr++*/
+        zdep         tmp6,28,29,tmp4    /* compute the number of bits to shift */
+        mtctl        tmp4,11            /* load the shift count into cr11 = shift count register.*/
+        addibt,<,n   -4,count,chkchnk2 /* first step in pre adjustment of count for looping.*/
+
+        ldwm        4(0,s_addr),tmp2    /* get either first or second word from source. */
+	combt,=		tmp5,r0,skip_mask4 /* don't mask if whole word is valid*/
+        vshd        tmp1,tmp2,tmp3      /* position data !  (delay slot)*/
+	sh3add		tmp5,r0,save	/* setup r1*/
+	mtctl		save,r11	/* setup mask in save*/
+	zvdepi		-2,32,save
+	or		save, tmp3, tmp3
+        mtctl           tmp4,11            /* re-load the shift count into cr11 */
+
+skip_mask4:
+	uxor,nbz	tmp3, r0, save
+	b,n		null4		/* special case for first word */
+	copy 		r0, tmp5	/* zero out tmp5 so we don't try to mask again*/
+	copy		r0, tmp7	/* zero out tmp7 so we don't try to use original s_addr anymore */
+	b		continue
+        stbys,b,m   tmp3,4(0,d_addr)    /* store ! */
+
+chunk2:
+        ldwm        4(0,s_addr),tmp2
+        vshd        tmp1,tmp2,tmp3 
+
+skip_mask2:
+	uxor,nbz	tmp3, r0, save
+	b,n		null3
+        stbys,b,m   tmp3,4(0,d_addr)    /* store ! */
+
+continue:
+        ldwm        4(0,s_addr),tmp1    /* get 2nd word ! */
+        vshd        tmp2,tmp1,tmp3      /* position data ! */
+	uxor,nbz	tmp3, r0, save
+	b,n		null3
+
+        addibf,<    -8,count,chunk2    /* If count is still >= 8 do another loop.*/
+        stbys,b,m   tmp3,4(0,d_addr)    /* store !*/
+
+chkchnk2:
+        addibt,<,n  4,count,bp_0       /* if we don't have 4 bytes left then do the back porch (bp_0)*/
+
+subchnk2: /* we have less than 8 chars to copy*/
+
+        ldwm        4(0,s_addr),tmp2    /* get next word !*/
+	combt,=		tmp5,r0,skip_mask3
+        vshd        tmp1,tmp2,tmp3      /* position data !*/
+	sh3add		tmp5,r0,save	/* setup r1*/
+	mtctl		save,r11	/* setup mask in save*/
+	zvdepi		-2,32,save
+	or		save, tmp3, tmp3
+	mtctl		tmp4,11		/* restore shift value again */
+skip_mask3:
+	uxor,nbz	tmp3,r0,save
+	b,n		null3
+	copy		r0,tmp5   /* zero out tmp5 so null3 does correct alignment */
+	copy		r0,tmp7	  /* zero out tmp7 so we don't use orignal s_addr since no longer valid */
+	b		bp_1 /* we now have less than 4 bytes to move*/
+        stbys,b,m   tmp3,4(0,d_addr)    /* store !*/
+
+bp_0:    
+	copy		tmp1,tmp2	/* switch registers for shift process */
+	addibt,<=,n  4,count,done        /* if count = -4 this implies that count = 0 -> done */
+
+bp_1:
+        ldwm        4(0,s_addr),tmp1    /* get final word !        */
+        vshd        tmp2,tmp1,tmp3      /* position data !*/
+	uxor,nbz	tmp3,r0,save	/* if no-byte-zero */
+	b,n		bp_null		/* don't goto no_null-find which null instead */
+no_null:
+	add	    d_addr,count,d_addr	/* set up d_addr for stbys,e */
+	b		done		/* were done*/
+        stbys,e     tmp3,0(0,d_addr)    /* store the data !*/
+
+/* here we do ye old byte-at-a-time moves.*/
+align_null1:
+	b	byteloop
+	addi	-4,s_addr,s_addr
+null1:
+	copy		tmp6,s_addr		/* restore orig s_addr (aligned only) */
+byteloop:
+	addibt,=     4,count,done
+null2:
+        ldbs,ma     1(s_addr),tmp1
+encore:
+	combt,=,n	tmp1,r0, done
+        stbs,ma     tmp1,1(d_addr) 
+        addibf,=,n  -1,count,encore
+        ldbs,ma     1(s_addr),tmp1
+	b,n		done
+
+bp_null:
+	addi	-4,count,count		/* fudge count 'cause byteloop will re-increment */
+
+null3:	/* not_aligned case reset s_addr and finish byte-wise */
+	combt,=,n  r0,tmp7,null3a	/* if tmp7 is not valid address then branch below */
+	b 	byteloop		  	/* otherwise reset s_addr to tmp7 and finish */
+	copy 	tmp7, s_addr
+
+null3a: /* right shift target */
+	addibt,<,n  0,tmp6,null3b	/* if left shifting */
+	sub	r0,tmp6,tmp6		/* do null3b code */
+	addi	-4,tmp6,tmp6
+	b	byteloop
+	add	tmp6,s_addr,s_addr	/* reset s_addr by 4 + shift_amt */
+
+null3b:
+	subi	-8,tmp6,tmp6
+	add	tmp5,tmp6,tmp6  /* adjust by the dest offset if this is our first store */
+	b	byteloop
+	add	tmp6,s_addr,s_addr	/* adjust s_addr by (8-shift_amt-dest_off) */
+
+null4:
+	add,>	tmp6,r0,tmp6		/* if left shift */
+	b,n	null3			/* then do null3 */
+	b	byteloop
+	addi	-4,s_addr,s_addr	/* adj source only by 4 */
+	
+done:    
+	bv		0(r2)
+	stbs		r0,0(d_addr)
+quit:
+EXIT(strncat)
diff --git a/newlib/libc/machine/hppa/strncmp.S b/newlib/libc/machine/hppa/strncmp.S
new file mode 100644
index 000000000..222384ee7
--- /dev/null
+++ b/newlib/libc/machine/hppa/strncmp.S
@@ -0,0 +1,189 @@
+/*
+ *  (c) Copyright 1986 HEWLETT-PACKARD COMPANY
+ *
+ *  To anyone who acknowledges that this file is provided "AS IS"
+ *  without any express or implied warranty:
+ *      permission to use, copy, modify, and distribute this file
+ *  for any purpose is hereby granted without fee, provided that
+ *  the above copyright notice and this notice appears in all
+ *  copies, and that the name of Hewlett-Packard Company not be
+ *  used in advertising or publicity pertaining to distribution
+ *  of the software without specific, written prior permission.
+ *  Hewlett-Packard Company makes no representations about the
+ *  suitability of this software for any purpose.
+ */
+
+/* strcmp(s1, s2) */
+/* returns integer: < 0 iff s1 lexicographically less than s2 */
+/* 		    > 0 iff s1 lexicographically greater than s2 */
+/* 		    = 0 iff s1 lexicographically equal to s2 */
+/*  		    = 0 iff s1 lexicographically equal to s2 */
+/*		    quit after n charachters */
+#include "DEFS.h"
+
+#define s1   	  26
+#define s2  	  25
+#define tmp1	  19
+#define s2word    20
+#define tmp3      21
+#define tmp7      22
+#define s1word	  29
+#define save	   1
+#define tmp6	  23
+#define tmp5	  28
+#define count	  24
+
+ENTRY(strncmp)
+	combt,<,n	r0,count,search	/* N <= 0 yields equality */
+	bv	r0(rp)			/* */
+	copy	0,ret0			/* return 0 (DELAY SLOT) */
+search:	combf,=,n 	s1,s2,findout 	/* s1 != s2? */
+	bv	r0(rp)			/* */
+        copy 	0,ret0			/* return 0 (delay slot) 	 */
+findout:
+        comibf,=,n 	0,s1,checks1	/* s1 == NULL? 	 */
+	ldbs	0(0,s2),ret0		/* */
+	bv	r0(rp)			/* */
+	subi	0,ret0,ret0		/* ret0 <- -*s2 */
+checks1:
+        comibf,=,n 	0,s2,checkitout	/* s2 == NULL? 	 */
+	bv	r0(rp)			/* */
+        ldbs 	0(0,s1),28 		/* return *s1 */
+
+checkitout:
+        extru	s2,31,2,tmp1		/* Extract the low two bits of the s2. */
+        extru	s1,31,2,tmp5		/* Extract the low two bits of the s1 */
+        sub,=	tmp5,tmp1,tmp3		/* Are s1 & s2 aligned with each other? */
+	b	not_aligned		/* It's more complicated (not_aligned) */
+	dep	0,31,2,s1		/* Compute word address of s1 (DELAY SLOT) */
+	dep	0,31,2,s2		/* Compute word address of s2 */
+	ldwm	4(0,s1),s1word		/* get next s1 word  s1+=4 */
+	combt,=	tmp5,r0,skipmask	/* skip masking, if we can */
+	ldwm	4(0,s2),s2word		/* get next s2 word  s2+=4 (DELAY SLOT) */
+	add	tmp5,count,count	/* bump count by the number of bytes */
+					/*  we are going to mask */
+	sh3add	tmp5,r0,save		/* save now has number of bits to mask */
+	mtctl	save,11
+	zvdepi	-2,32,save		/* load save with proper mask */
+	or	save,s1word,s1word	/* mask s1word (s1) */
+	or	save,s2word,s2word	/* mask s2word (s2) */
+	
+
+skipmask:
+	combt,=,n	s1word,s2word,chknulls	/* are these words equal? */
+
+checkbyte:
+	extru	s1word,7,8,tmp3		/* get first byte (character) */
+ckbyte2:	extru	s2word,7,8,tmp7		/* get first byte (character) */
+	combf,=	tmp3,tmp7,done		/* quit if first byte is not equal */
+	sub	tmp3,tmp7,ret0		/* return difference (delay slot) */
+	comibt,=,n	0,tmp3,done	/* have we reached the end of string */
+					/* if so done ret0 already has zero */
+	addibt,<=,n	-1,count,done	/* have we checked N chars? ret0 == 0 */
+	extru	s1word,15,8,tmp3	/* get second byte (character) */
+	extru	s2word,15,8,tmp7	/* get second byte (character)	 */
+	combf,=	tmp3,tmp7,done		/* quit if second byte is not equal */
+	sub	tmp3,tmp7,ret0		/* return difference (delay slot) */
+	comibt,=,n	0,tmp3,done	/* have we reached the end of string */
+					/* if so done ret0 already has zero */
+	addibt,<=,n	-1,count,done	/* have we checked N chars? */
+	extru	s1word,23,8,tmp3	/* get third byte (character) */
+	extru	s2word,23,8,tmp7	/* get third byte (character)	 */
+	combf,=	tmp3,tmp7,done		/* done if third byte is not equal */
+	sub	tmp3,tmp7,ret0		/* return difference (delay slot) */
+	comibt,=,n	0,tmp3,done	/* have we reached the end of string */
+					/* if so done ret0 already has zero */
+	addibt,<=,n	-1,count,done	/* have we checked N chars? */
+	extru	s1word,31,8,tmp3	/* get last byte (character) */
+	extru	s2word,31,8,tmp7	/* get last byte (character)	 */
+	bv	r0(rp)			/* */
+	sub	tmp3,tmp7,ret0		/*  the last characters in the word is */
+					/*   where the  difference is, so return */
+					/*    the difference and we're outta here */
+
+
+chknulls:
+	addibt,<=,n	-4,count,zero	/* have we checked N chars? */
+	uxor,nbz	s1word,0,0	/* don't have to check s2   Just quit */
+	bv	r0(rp)			/* */
+	copy	0,28			/* return 0 */
+	ldwm	4(0,s2),s2word		/* get next s2 word  s2+=4 */
+	b	skipmask		/* keep checking */
+	ldwm	4(0,s1),s1word		/* get next s1 word  s1+=4 */
+
+
+not_aligned:
+	dep	r0,31,2,s2		/* Compute word address of s2 */
+	combt,<,n	r0,tmp3,shifts1	/* Do we shift s1 or s2 */
+	sh3add	tmp3,r0,tmp3		/* eight bits per byte so mul by 8 */
+	ldwm	4(0,s1),s1word		/* get first word of s1 */
+	ldwm	4(0,s2),s2word		/* get first word or s2 */
+	combt,=,n	r0,tmp5,masks2	/* Do we need to mask beginning of s1 */
+	add	tmp5,count,count	/* bump count by the number of bytes */
+					/*  we are going to mask */
+	sh3add	tmp5,r0,save		/* save now has number of bits to mask */
+	mtctl	save,11
+	zvdepi	-2,32,save		/* load save with proper mask */
+	or	save,s1word,s1word	/* */
+masks2:	sh3add	tmp1,r0,save		/* save now has number of bits to mask */
+	mtctl	save,11
+	zvdepi	-2,32,save		/* load save with proper mask */
+	or	save,s2word,s2word	/* */
+	mtctl	tmp3,11			/* Move shift amount to CR11 */
+more:	uxor,nbz	s2word,r0,r0		/* Is there a null in first word	 */
+	b,n	chunk1			/* */
+	ldwm	4(0,s2),tmp7		/* load second word to enable us to shift */
+	vshd	s2word,tmp7,s2word	/* */
+	combf,=,n	s1word,s2word,ckbyte2	/* */
+	extru	s1word,7,8,tmp3		/* get first byte (DELAY SLOT) */
+	addibt,<=,n	-4,count,zero	/* have we checked N chars? */
+	uxor,nbz	s1word,0,0	/* even though they're equal we could be done */
+	b,n	zero	
+	copy	tmp7,s2word		/* */
+	b	more			/* keep checking */
+	ldwm	4(0,s1),s1word		/* get next s1 (DELAY SLOT) */
+
+chunk1:	
+	vshd	s2word,r0,s2word	/* */
+	b	ckbyte2			/* */
+	extru	s1word,7,8,tmp3		/* */
+
+
+shifts1:
+	sh3add	tmp3,r0,tmp3		/* eight bits per byte so mul by 4 */
+	sub	r0,tmp3,tmp3		/* Get negative value for left shift */
+	ldwm	4(0,s2),s2word		/* get first word of s2 */
+	ldwm	4(0,s1),s1word		/* get first word or s1 */
+	combt,=,n	r0,tmp1,masks1	/* Do we need to mask beginning of s2 */
+	add	tmp1,count,count	/* bump count by the number of bytes */
+					/*  we are going to mask */
+	sh3add	tmp1,r0,save		/* save now has number of bits to mask */
+	mtctl	save,11
+	zvdepi	-2,32,save		/* load save with proper mask */
+	or	save,s2word,s2word	/* */
+masks1:	sh3add	tmp5,r0,save		/* save now has number of bits to mask */
+	mtctl	save,11
+	zvdepi	-2,32,save		/* load save with proper mask */
+	or	save,s1word,s1word	/* */
+	mtctl	tmp3,11			/* Move shift amount to CR11 */
+more1:	uxor,nbz	s1word,r0,r0		/* Is there a null in first byte	 */
+	b,n	chunk2			/* */
+	ldwm	4(0,s1),tmp7		/* load second word to enable us to shift */
+	vshd	s1word,tmp7,s1word	/* */
+	combf,=,n	s2word,s1word,ckbyte2	/* */
+	extru	s1word,7,8,tmp3		/* get first byte (DELAY SLOT) */
+	addibt,<=,n	-4,count,zero	/* have we checked N chars? */
+	uxor,nbz	s2word,0,0	/* even though they're equal we could be done */
+	b,n	zero			/* zero ret0 and quit */
+	copy	tmp7,s1word		/* */
+	b	more1			/* keep checking */
+	ldwm	4(0,s2),s2word		/* get next s2 (DELAY SLOT) */
+
+chunk2:	
+	vshd	s1word,r0,s1word	/* */
+	b	ckbyte2			/* */
+	extru	s1word,7,8,tmp3		/* */
+
+zero:	copy 	r0,ret0
+done:
+EXIT(strncmp)
diff --git a/newlib/libc/machine/hppa/strncpy.S b/newlib/libc/machine/hppa/strncpy.S
new file mode 100644
index 000000000..37ed83237
--- /dev/null
+++ b/newlib/libc/machine/hppa/strncpy.S
@@ -0,0 +1,256 @@
+/*
+ *  (c) Copyright 1986 HEWLETT-PACKARD COMPANY
+ *
+ *  To anyone who acknowledges that this file is provided "AS IS"
+ *  without any express or implied warranty:
+ *      permission to use, copy, modify, and distribute this file
+ *  for any purpose is hereby granted without fee, provided that
+ *  the above copyright notice and this notice appears in all
+ *  copies, and that the name of Hewlett-Packard Company not be
+ *  used in advertising or publicity pertaining to distribution
+ *  of the software without specific, written prior permission.
+ *  Hewlett-Packard Company makes no representations about the
+ *  suitability of this software for any purpose.
+ */
+
+/* HPUX_ID:	@(#) $Revision$	*/
+/*
+ * strncpy(s1, s2, n)
+ *
+ * Copy s2 to s1, truncating or null-padding to always copy n bytes
+ * return s1
+ */
+
+#include "DEFS.h"
+
+#define	d_addr  r26
+#define	s_addr  r25
+#define	count   r24
+#define	tmp1    r19
+#define	tmp2    r20
+#define	tmp3    r21
+#define	tmp4    r22
+#define	tmp5	arg3
+#define	save	r1
+
+
+ENTRY(strncpy)
+
+	combt,=   s_addr,r0,pad_null_bytes1	/* if s2==NULL then pad nulls and exit */
+        copy      d_addr,ret0          /* The return value is defined to be the value of d_addr. DELAY SLOT*/
+        addibt,<,n  -4,count,byteloop     /* If count is <= 4 don't get fancy.*/
+
+        extru       s_addr,31,2,tmp1   /* Extract the low two bits of the source address.*/
+        extru       d_addr,31,2,tmp5   /* Extract the low two bits of the destination address.*/
+        add         count,tmp5,count   /* pre increment the count by the byte address so that the count is*/
+        comb,<>       tmp5,tmp1,not_aligned /* branch if tmp5<>tmp1. */
+        dep         0,31,2,s_addr      /* Compute the word address of the source.  DELAY SLOT.*/
+/* aligned*/
+	combt,=		tmp5,r0,skip_mask
+        ldwm        4(0,s_addr),tmp1   /* tmp1 = *s_addr   s_addr += 4 (DELAY SLOT)*/
+	sh3add		tmp5,r0,save	/* compute mask in save*/
+	mtctl		save,11
+	zvdepi		-2,32,save
+	b		skip_mask	/* don't reload tmp1*/
+	or		save,tmp1,tmp1  /* or mask with data*/
+
+chunks:
+	ldwm		4(0,s_addr),tmp1 /* get a word*/
+
+skip_mask:
+	uxor,nbz	tmp1,r0,save 	/* check for null*/
+	b,n		null1
+	addibf,<	-4,count,chunks
+        stbys,b,m   tmp1,4(0,d_addr)   /* store word (delay slot)*/
+
+/* back_porch				   last word to store*/
+         addibt,=,n  4,count,done       /* if count = 0 we're, of course, done !*/
+         ldws        0(s_addr),tmp1     /* load up the back_porch*/
+         add         d_addr,count,d_addr/* final store address  is +1 too high !*/
+	 sh3add		count,r0, save	/* setup right mask based on count*/
+	 mtctl		save,r11
+	 zvdepi		-2,32,save	/*save now has left-hand mask*/
+	 uaddcm		r0,save,save	/*form right hand mask */
+	 or		tmp1,save,tmp1	/*and insert data*/
+	 uxor,nbz	tmp1,r0,save	/* check for null*/
+	 b,n 		null2
+	 bv		0(r2)
+	 stbys,e	tmp1,0(d_addr)	/* done */
+
+/* Begin non_aligned code. */
+not_aligned:
+        sub,>=       tmp5,tmp1,tmp3     /* compute the shift amt.and skip load if tmp5 > tmp1.*/
+        ldwm         4(0,s_addr),tmp1   /* load up the first word from the source. tmp1 = *s_addr++*/
+        zdep         tmp3,28,29,tmp4    /* compute the number of bits to shift */
+        mtctl        tmp4,11            /* load the shift count into cr11 = shift count register.*/
+        addibt,<,n   -4,count,chkchnk2 /* first step in pre adjustment of count for looping.*/
+
+        ldwm        4(0,s_addr),tmp2    /* get either first or second word from source. */
+	combt,=		tmp5,r0,skip_mask2 /* don't mask if whole word is valid*/
+        vshd        tmp1,tmp2,tmp3      /* position data !  (delay slot)*/
+	sh3add		tmp5,r0,save	/* setup r1*/
+	mtctl		save,r11	/* setup mask in save*/
+	zvdepi		-2,32,save
+	or		save, tmp3, tmp3
+        mtctl           tmp4,11            /* re-load the shift count into cr11 */
+	b		skip_mask2
+	copy 		r0, tmp5	/* zero out tmp5 so we don't try to mask again*/
+
+chunk2:
+        ldwm        4(0,s_addr),tmp2
+        vshd        tmp1,tmp2,tmp3 
+
+skip_mask2:
+	uxor,nbz	tmp3, r0, save
+	b,n		null3
+        stbys,b,m   tmp3,4(0,d_addr)    /* store ! */
+
+        ldwm        4(0,s_addr),tmp1    /* get 2nd word ! */
+        vshd        tmp2,tmp1,tmp3      /* position data ! */
+	uxor,nbz	tmp3, r0, save
+	b,n		null4
+
+        addibf,<    -8,count,chunk2    /* If count is still >= 8 do another loop.*/
+        stbys,b,m   tmp3,4(0,d_addr)    /* store !*/
+
+chkchnk2:
+        addibt,<,n  4,count,bp_0       /* if we don't have 4 bytes left then do the back porch (bp_0)*/
+
+subchnk2: /* we have less than 8 chars to copy*/
+
+        ldwm        4(0,s_addr),tmp2    /* get next word !*/
+	combt,=		tmp5,r0,skip_mask3
+        vshd        tmp1,tmp2,tmp3      /* position data !*/
+	sh3add		tmp5,r0,save	/* setup r1*/
+	mtctl		save,r11	/* setup mask in save*/
+	zvdepi		-2,32,save
+	or		save, tmp3, tmp3
+	mtctl		tmp4,11		/* restore shift value again */
+	copy 		r0, tmp5	/* zero out tmp5 so we don't try to mask again*/
+skip_mask3:
+	uxor,nbz	tmp3,r0,save
+	b,n		null4
+	b		bp_1 /* we now have less than 4 bytes to move*/
+        stbys,b,m   tmp3,4(0,d_addr)    /* store !*/
+
+bp_0:    
+	copy        tmp1,tmp2           /* switch registers used in the shift process.*/
+	addibt,<=,n  4,count,done        /* if count = -4 this implies that count = 0 -> done */
+
+bp_1:
+        ldwm        4(0,s_addr),tmp1    /* get final word !        */
+        vshd        tmp2,tmp1,tmp3      /* position data !*/
+	uxor,sbz	tmp3,r0,save	/* if some-byte-zero */
+	b		no_null		/* don't goto no_null-find which null instead */
+	add		d_addr,count,d_addr	/* get d_addr ready for stbys,e */
+	extru,<>	save,7,8,r0
+	b		found_null5
+	copy		r0, tmp5
+	extru,<>	save,15,8,r0
+	b		found_null5
+	ldil		0x1FE000,tmp5		/* setup mask (FF000000)*/
+	extru,<> 	save,23,8,r0
+	b		found_null5
+	ldil		0x1FFFE0,tmp5		/* setup mask (FFFF0000)*/
+	ldo		-1(r0),tmp5		/* setup mask (FFFFFFFF)*/
+found_null5:
+	and		tmp3,tmp5,tmp3  /* zero out tmp5 based on mask in tmp5*/
+no_null:
+	bv		0(r2)		/* were done*/
+        stbys,e     tmp3,0(0,d_addr)    /* store the data !*/
+
+/* here we do ye old byte-at-a-time moves.*/
+byteloop: 
+	addibt,=,n     4,count,done
+        comb,=    0,s_addr,done
+	stbs	  r0,0(d_addr)		/* store null in case s_addr == NULL */
+        ldbs,ma     1(s_addr),tmp1
+encore:
+	combt,=,n	tmp1,r0, pad_null_bytes1
+        stbs,ma     tmp1,1(d_addr) 
+        addibf,=,n  -1,count,encore
+        ldbs,ma     1(s_addr),tmp1
+	b,n		done
+
+pnb_1:
+	addibt,=,n	4,count,done /* if count was already 0 then we're done*/
+
+pad_null_bytes1:
+	combt,=,n   	count,r0,done	/* if count==0 then exit */
+pad_null_bytes2:
+	addibf,=	-1,count,pad_null_bytes2
+	stbs,ma		r0,1(d_addr)
+	b,n		done
+
+pad_nulls:
+	addibf,<=,n	-4,count,pad_nulls
+	stwm		r0,4(d_addr)
+	b,n		pnb_1
+
+
+null1:
+	extru,<>	save,7,8,r0
+	b		found_null1
+	copy		r0, tmp5
+	extru,<>	save,15,8,r0
+	b		found_null1
+	ldil		0x1FE000,tmp5		/* setup mask (FF000000)*/
+	extru,<> 	save,23,8,r0
+	b		found_null1
+	ldil		0x1FFFE0,tmp5		/* setup mask (FFFF0000)*/
+	ldo		-1(r0),tmp5		/* setup mask (FFFFFFFF)*/
+found_null1:
+	and		tmp1,tmp5,tmp1		/*zero out tmp1 according to mask*/
+	b		pad_nulls		/* nullify remaining count bytes*/
+	stbys,b,m	tmp1,4(0,d_addr)	/* first word (account for alignment)*/
+
+
+null2:	/* back porch case. We have less than 4 bytes to go.*/
+	extru,<>	save,7,8,r0 	/* is null in 1st byte? */
+	b		found_null2
+	copy		r0, tmp5
+	extru,<>	save,15,8,r0	/* is null in 2nd byte? */
+	b		found_null2
+	ldil		0x1FE000,tmp5		/* setup mask (FF000000)*/
+	b		found_null2	/* null must be in 3rd byte */
+	ldil		0x1FFFE0,tmp5		/* setup mask (FFFF0000)*/
+found_null2:	
+	and		tmp1,tmp5,tmp1		/*zero out tmp1 according to mask*/
+	bv		0(r2)			/* we're done*/
+	stbys,e		tmp1,0(0,d_addr)	/* last word (back porch)*/
+
+null3:	/* not_aligned case where null is found in first of two words--adjust count*/
+	extru,<>	save,7,8,r0
+	b		found_null3
+	copy		r0, tmp5
+	extru,<>	save,15,8,r0
+	b		found_null3
+	ldil		0x1FE000,tmp5		/* setup mask (FF000000)*/
+	extru,<> 	save,23,8,r0
+	b		found_null3
+	ldil		0x1FFFE0,tmp5		/* setup mask (FFFF0000)*/
+	ldo		-1(r0),tmp5		/* setup mask (FFFFFFFF)*/
+found_null3:
+	addi		4,count,count 		/* fix count since null is in first of two words*/
+	and		tmp3,tmp5,tmp3		/*zero out tmp3 according to mask*/
+	b		pad_nulls		/* nullify remaining count bytes*/
+        stbys,b,m       tmp3,4(d_addr)
+
+null4:	/* not_aligned case where null is found in second of two words*/
+	extru,<>	save,7,8,r0
+	b		found_null4
+	copy		r0, tmp5
+	extru,<>	save,15,8,r0
+	b		found_null4
+	ldil		0x1FE000,tmp5		/* setup mask (FF000000)*/
+	extru,<> 	save,23,8,r0
+	b		found_null4
+	ldil		0x1FFFE0,tmp5		/* setup mask (FFFF0000)*/
+	ldo		-1(r0),tmp5		/* setup mask (FFFFFFFF)*/
+found_null4:
+	and		tmp3,tmp5,tmp3		/*zero out tmp4 according to mask*/
+	b		pad_nulls		/* nullify remaining count bytes*/
+        stbys,b,m       tmp3,4(d_addr)
+
+done:    
+EXIT(strncpy)