diff options
| -rw-r--r-- | ChangeLog | 21 | ||||
| -rw-r--r-- | Makefile.in | 132 | ||||
| -rwxr-xr-x | configure | 7 | ||||
| -rw-r--r-- | configure.in | 28 |
4 files changed, 181 insertions, 7 deletions
@@ -1,3 +1,24 @@ +2001-11-28 DJ Delorie <dj@redhat.com> + Zack Weinberg <zack@codesourcery.com> + + When build != host, create libiberty for the build machine. + + * Makefile.in (TARGET_CONFIGARGS, BUILD_CONFIGARGS): Replace + CONFIG_ARGUMENTS. + (ALL_BUILD_MODULES_LIST, BUILD_CONFIGDIRS, BUILD_SUBDIR): + New variables. + (ALL_BUILD_MODULES, CONFIGURE_BUILD_MODULES): New variables + and rules. + (all.normal): Depend on ALL_BUILD_MODULES. + (CONFIGURE_TARGET_MODULES rule): Use TARGET_CONFIGARGS. + (all-build-libiberty): Depend on configure-build-libiberty. + + * configure: Calculate and substitute proper value for + ALL_BUILD_MODULES. + * configure.in: Create the build subdirectory. + Calculate and substitute TARGET_CONFIGARGS (formerly + CONFIG_ARGUMENTS); also BUILD_SUBDIR and BUILD_CONFIGARGS (new). + 2001-11-26 Geoffrey Keating <geoffk@redhat.com> * config.sub: Update to version 1.232 on subversion. diff --git a/Makefile.in b/Makefile.in index f6252662e..e48d98a0a 100644 --- a/Makefile.in +++ b/Makefile.in @@ -179,8 +179,16 @@ TARGET_CONFIGDIRS = libiberty libgloss $(SPECIAL_LIBS) newlib libio librx libstd # Changed by configure to $(target_alias) if cross. TARGET_SUBDIR = . -# This is set by the configure script to the arguments passed to configure. -CONFIG_ARGUMENTS = +BUILD_CONFIGDIRS = libiberty +BUILD_SUBDIR = . + +# This is set by the configure script to the arguments to use when configuring +# directories built for the target. +TARGET_CONFIGARGS = + +# This is set by the configure script to the arguments to use when configuring +# directories built for the build system. +BUILD_CONFIGARGS = # This is set by configure to REALLY_SET_LIB_PATH if --enable-shared # was used. @@ -489,6 +497,18 @@ EXTRA_GCC_FLAGS = \ GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS) # This is a list of the targets for all of the modules which are compiled +# using the build machine's native compiler. Configure edits the second +# macro for build!=host builds. +ALL_BUILD_MODULES_LIST = \ + all-build-libiberty +ALL_BUILD_MODULES = + +# This is a list of the configure targets for all of the modules which +# are compiled using the native tools. +CONFIGURE_BUILD_MODULES = \ + configure-build-libiberty + +# This is a list of the targets for all of the modules which are compiled # using $(FLAGS_TO_PASS). ALL_MODULES = \ all-apache \ @@ -954,6 +974,7 @@ CLEAN_X11_MODULES = \ # The target built for a native build. .PHONY: all.normal all.normal: \ + $(ALL_BUILD_MODULES) \ $(ALL_MODULES) \ $(ALL_X11_MODULES) \ $(ALL_TARGET_MODULES) \ @@ -1195,6 +1216,106 @@ gcc-no-fixedincludes: mv gcc/tmp-include gcc/include 2>/dev/null; \ else true; fi +# This rule is used to build the modules which are built with the +# build machine's native compiler. +.PHONY: $(ALL_BUILD_MODULES) +$(ALL_BUILD_MODULES): + dir=`echo $@ | sed -e 's/all-build-//'`; \ + if [ -f ./$${dir}/Makefile ] ; then \ + r=`pwd`; export r; \ + s=`cd $(srcdir); pwd`; export s; \ + (cd $(BUILD_SUBDIR)/$${dir} && $(MAKE) all); \ + else \ + true; \ + fi + +# This rule is used to configure the modules which are built with the +# native tools. +.PHONY: $(CONFIGURE_BUILD_MODULES) +$(CONFIGURE_BUILD_MODULES): + @dir=`echo $@ | sed -e 's/configure-build-//'`; \ + if [ ! -d $(BUILD_SUBDIR) ]; then \ + true; \ + elif [ -f $(BUILD_SUBDIR)/$${dir}/Makefile ] ; then \ + true; \ + elif echo " $(BUILD_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \ + if [ -d $(srcdir)/$${dir} ]; then \ + [ -d $(BUILD_SUBDIR)/$${dir} ] || mkdir $(BUILD_SUBDIR)/$${dir};\ + r=`pwd`; export r; \ + s=`cd $(srcdir); pwd`; export s; \ + AR="$(AR_FOR_BUILD)"; export AR; \ + AS="$(AS_FOR_BUILD)"; export AS; \ + CC="$(CC_FOR_BUILD)"; export CC; \ + CFLAGS="$(CFLAGS_FOR_BUILD)"; export CFLAGS; \ + CXX="$(CXX_FOR_BUILD)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS_FOR_BUILD)"; export CXXFLAGS; \ + GCJ="$(GCJ_FOR_BUILD)"; export GCJ; \ + DLLTOOL="$(DLLTOOL_FOR_BUILD)"; export DLLTOOL; \ + LD="$(LD_FOR_BUILD)"; export LD; \ + LDFLAGS="$(LDFLAGS_FOR_BUILD)"; export LDFLAGS; \ + NM="$(NM_FOR_BUILD)"; export NM; \ + RANLIB="$(RANLIB_FOR_BUILD)"; export RANLIB; \ + WINDRES="$(WINDRES_FOR_BUILD)"; export WINDRES; \ + echo Configuring in $(BUILD_SUBDIR)/$${dir}; \ + cd "$(BUILD_SUBDIR)/$${dir}" || exit 1; \ + case $(srcdir) in \ + /* | [A-Za-z]:[\\/]*) \ + topdir=$(srcdir) ;; \ + *) \ + case "$(BUILD_SUBDIR)" in \ + .) topdir="../$(srcdir)" ;; \ + *) topdir="../../$(srcdir)" ;; \ + esac ;; \ + esac; \ + if [ "$(srcdir)" = "." ] ; then \ + if [ "$(BUILD_SUBDIR)" != "." ] ; then \ + if $(SHELL) $$s/symlink-tree $${topdir}/$${dir} "no-such-file" ; then \ + if [ -f Makefile ]; then \ + if $(MAKE) distclean; then \ + true; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + srcdiroption="--srcdir=."; \ + libsrcdir="."; \ + else \ + srcdiroption="--srcdir=$${topdir}/$${dir}"; \ + libsrcdir="$$s/$${dir}"; \ + fi; \ + if [ -f $${libsrcdir}/configure ] ; then \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ + $(BUILD_CONFIGARGS) $${srcdiroption} \ + --with-build-subdir="$(BUILD_SUBDIR)"; \ + else \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $$s/configure \ + $(BUILD_CONFIGARGS) $${srcdiroption} \ + --with-build-subdir="$(BUILD_SUBDIR)"; \ + fi || exit 1; \ + if [ -f skip-this-dir ] ; then \ + sh skip-this-dir; \ + rm -f skip-this-dir; \ + cd ..; rmdir $${dir} || true; \ + else \ + true; \ + fi; \ + else \ + true; \ + fi; \ + else \ + true; \ + fi + # This rule is used to build the modules which use FLAGS_TO_PASS. To # build a target all-X means to cd to X and make all. # @@ -1339,12 +1460,12 @@ $(CONFIGURE_TARGET_MODULES): if [ -f $${libsrcdir}/configure ] ; then \ rm -f no-such-file skip-this-dir; \ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ - $(CONFIG_ARGUMENTS) $${srcdiroption} \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ --with-target-subdir="$(TARGET_SUBDIR)"; \ else \ rm -f no-such-file skip-this-dir; \ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \ - $(CONFIG_ARGUMENTS) $${srcdiroption} \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ --with-target-subdir="$(TARGET_SUBDIR)"; \ fi; \ if [ -f skip-this-dir ] ; then \ @@ -1635,6 +1756,9 @@ all-target-libio: configure-target-libio all-gas all-ld all-gcc all-target-libib check-target-libio: all-target-libstdc++ all-libgui: all-tcl all-tk all-tcl8.1 all-tk8.1 all-itcl all-libiberty: + +all-build-libiberty: configure-build-libiberty + configure-target-libffi: $(ALL_GCC_C) all-target-libffi: configure-target-libffi configure-target-libjava: $(ALL_GCC_CXX) configure-target-zlib configure-target-boehm-gc configure-target-qthreads configure-target-libffi @@ -1078,6 +1078,12 @@ else GDB_TK="" fi +all_build_modules= +if test x"${build_alias}" != x"${host_alias}" +then + all_build_modules='$(ALL_BUILD_MODULES_LIST)' +fi + for subdir in . ${subdirs} ; do # ${subdir} is relative path from . to the directory we're currently @@ -1378,6 +1384,7 @@ EOF -e "s|^oldincludedir[ ]*=.*$|oldincludedir = ${oldincludedir}|" \ -e "s|^infodir[ ]*=.*$|infodir = ${infodir}|" \ -e "s|^mandir[ ]*=.*$|mandir = ${mandir}|" \ + -e "s|^ALL_BUILD_MODULES =.*|ALL_BUILD_MODULES =${all_build_modules}|" \ -e "/^CC[ ]*=/{ :loop1 /\\\\$/ N diff --git a/configure.in b/configure.in index 7b7e4bb73..fa83cedf6 100644 --- a/configure.in +++ b/configure.in @@ -434,6 +434,18 @@ if [ ! -d ${target_subdir} ] ; then fi fi +build_subdir=${build_alias} + +if [ x"${build_alias}" != x"${host}" ] ; then + if [ ! -d ${build_subdir} ] ; then + if mkdir ${build_subdir} ; then true + else + echo "'*** could not make ${PWD=`pwd`}/${build_subdir}" 1>&2 + exit 1 + fi + fi +fi + copy_dirs= # Handle --with-headers=XXX. The contents of the named directory are @@ -1260,7 +1272,8 @@ if [ "${shared}" = "yes" ]; then esac fi -# Record target_configdirs and the configure arguments in Makefile. +# Record target_configdirs and the configure arguments for target and +# build configuration in Makefile. target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'` targargs=`echo "${arguments}" | \ sed -e 's/--no[^ ]*//' \ @@ -1269,6 +1282,11 @@ targargs=`echo "${arguments}" | \ -e 's/--bu[a-z-]*=[^ ]*//' \ -e 's/--ta[a-z-]*=[^ ]*//'` +# For the build-side libraries, we just need to pretend we're native, +# and not use the same cache file. Multilibs are neither needed nor +# desired. +buildargs="--cache-file=../config.cache --build=${build_alias} --host=${build_alias} ${targargs}" + # Passing a --with-cross-host argument lets the target libraries know # whether they are being built with a cross-compiler or being built # native. However, it would be better to use other mechanisms to make the @@ -1289,6 +1307,9 @@ if [ x${with_newlib} != xno ] && echo " ${target_configdirs} " | grep " newlib " targargs="--with-newlib ${targargs}" fi +# Pass the appropriate --host, --build, and --cache-file arguments. +targargs="--cache-file=../config.cache --host=${target_alias} --build=${build_alias} ${targargs}" + # provide a proper gxx_include_dir. # Note, if you change the default, make sure to fix both here and in # the gcc, libio, and libstdc++ subdirectories. @@ -1426,15 +1447,16 @@ qCXX_FOR_TARGET=`echo "$CXX_FOR_TARGET" | sed 's,[&%],\\\&,g'` # macros. qqCXX_FOR_TARGET=`echo "$qCXX_FOR_TARGET" | sed -e 's,[$][$],$$$$,g'` -targargs="--cache-file=../config.cache --host=${target_alias} --build=${build_alias} ${targargs}" sed -e "s:^TARGET_CONFIGDIRS[ ]*=.*$:TARGET_CONFIGDIRS = ${target_configdirs}:" \ - -e "s%^CONFIG_ARGUMENTS[ ]*=.*$%CONFIG_ARGUMENTS = ${targargs}%" \ + -e "s%^TARGET_CONFIGARGS[ ]*=.*$%TARGET_CONFIGARGS = ${targargs}%" \ -e "s%^FLAGS_FOR_TARGET[ ]*=.*$%FLAGS_FOR_TARGET = ${FLAGS_FOR_TARGET}%" \ -e "s%^CC_FOR_TARGET[ ]*=.*$%CC_FOR_TARGET = ${CC_FOR_TARGET}%" \ -e "s%^CHILL_FOR_TARGET[ ]*=.*$%CHILL_FOR_TARGET = ${CHILL_FOR_TARGET}%" \ -e "s%^CXX_FOR_TARGET[ ]*=.*$%CXX_FOR_TARGET = ${qCXX_FOR_TARGET}%" \ -e "s%^CXX_FOR_TARGET_FOR_RECURSIVE_MAKE[ ]*=.*$%CXX_FOR_TARGET_FOR_RECURSIVE_MAKE = ${qqCXX_FOR_TARGET}%" \ -e "s%^TARGET_SUBDIR[ ]*=.*$%TARGET_SUBDIR = ${target_subdir}%" \ + -e "s%^BUILD_SUBDIR[ ]*=.*$%BUILD_SUBDIR = ${build_subdir}%" \ + -e "s%^BUILD_CONFIGARGS[ ]*=.*$%BUILD_CONFIGARGS = ${buildargs}%" \ -e "s%^gxx_include_dir[ ]*=.*$%gxx_include_dir=${gxx_include_dir}%" \ Makefile > Makefile.tem rm -f Makefile |