diff options
Diffstat (limited to 'libgloss/bfin/include/sys/anomaly_macros_rtl.h')
-rw-r--r-- | libgloss/bfin/include/sys/anomaly_macros_rtl.h | 756 |
1 files changed, 0 insertions, 756 deletions
diff --git a/libgloss/bfin/include/sys/anomaly_macros_rtl.h b/libgloss/bfin/include/sys/anomaly_macros_rtl.h deleted file mode 100644 index f6c667afd..000000000 --- a/libgloss/bfin/include/sys/anomaly_macros_rtl.h +++ /dev/null @@ -1,756 +0,0 @@ -/* - * The authors hereby grant permission to use, copy, modify, distribute, - * and license this software and its documentation for any purpose, provided - * that existing copyright notices are retained in all copies and that this - * notice is included verbatim in any distributions. No written agreement, - * license, or royalty fee is required for any of the authorized uses. - * Modifications to this software may be copyrighted by their authors - * and need not follow the licensing terms described here, provided that - * the new terms are clearly indicated on the first page of each file where - * they apply. - */ - -/************************************************************************ - * - * anomaly_macros_rtl.h : $Revision$ - * - * (c) Copyright 2005-2009 Analog Devices, Inc. All rights reserved. - * - * This file defines macros used within the run-time libraries to enable - * certain anomaly workarounds for the appropriate chips and silicon - * revisions. Certain macros are defined for silicon-revision none - this - * is to ensure behaviour is unchanged from libraries supplied with - * earlier tools versions, where a small number of anomaly workarounds - * were applied in all library flavours. __FORCE_LEGACY_WORKAROUNDS__ - * is defined in this case. - * - * This file defines macros for a subset of all anomalies that may impact - * the run-time libraries. - * - ************************************************************************/ - - -#ifdef _MISRA_RULES -#pragma diag(push) -#pragma diag(suppress:misra_rule_2_4:"Assembly code in comment used to illustrate anomalous behaviour") -#pragma diag(suppress:misra_rule_19_4:"The definition of WA_05000204_CHECK_AVOID_FOR_REV cannot be parenthasised as it would fail when used in assembly library code.") -#endif /* _MISRA_RULES */ - -#if !defined(__SILICON_REVISION__) -#define __FORCE_LEGACY_WORKAROUNDS__ -#endif - - -/* 05-00-0096 - PREFETCH, FLUSH, and FLUSHINV must be followed by a CSYNC -** -** ADSP-BF531/2/3 - revs 0.0-0.1, -** ADSP-BF561 - revs 0.0-0.1 (not supported in VDSP++ 4.0) -** -*/ -#define WA_05000096 \ - ((defined(__ADSPBF531__) || \ - defined(__ADSPBF532__) || \ - defined(__ADSPBF533__) || \ - defined(__ADSPBF561__)) && \ - ((defined(__SILICON_REVISION__) && \ - (__SILICON_REVISION__ == 0xffff || __SILICON_REVISION__ <= 0x1)) || \ - defined(__FORCE_LEGACY_WORKAROUNDS__))) - - -/* 05-00-0109 - Reserved bits in SYSCFG register not set at power on -** -** ADSP-BF531/2/3 - revs 0.0-0.2 (fixed 0.3) -** ADSP-BF561 - revs 0.0-0.2 (fixed 0.3. 0.0, 0.1 not supported in VDSP++ 4.0) -** -** Changes to start code. -*/ -#define WA_05000109 \ - ((defined(__ADSPBF531__) || \ - defined(__ADSPBF532__) || \ - defined(__ADSPBF533__) || \ - defined(__ADSPBF561__)) && \ - ((defined(__SILICON_REVISION__) && \ - (__SILICON_REVISION__ == 0xffff || __SILICON_REVISION__ <= 0x2)) || \ - defined(__FORCE_LEGACY_WORKAROUNDS__))) - - -/* 05-00-0123 - DTEST_COMMAND initiated memory access may be incorrect if -** data cache or DMA is active. -** -** ADSP-BF531/2/3 - revs 0.1-0.2 (fixed 0.3) -** ADSP-BF561 - revs 0.0-0.2 (0.0 and 0.1 not supported in VDSP++ 4.0) -*/ -#define WA_05000123 \ - ((defined(__ADSPBF531__) || \ - defined(__ADSPBF532__) || \ - defined(__ADSPBF533__) || \ - defined(__ADSPBF561__)) && \ - ((defined(__SILICON_REVISION__) && \ - (__SILICON_REVISION__ == 0xffff || __SILICON_REVISION__ <= 0x2)) || \ - defined(__FORCE_LEGACY_WORKAROUNDS__))) - - -/* 05-00-0125 - Erroneous exception when enabling cache -** -** ADSP-BF531/2/3 - revs 0.1-0.2 (fixed 0.3) -** ADSP-BF561 - revs 0.0-0.2 (0.0 and 0.1 not supported in VDSP++ 4.0) -** -*/ -#define WA_05000125 \ - ((defined(__ADSPBF531__) || \ - defined(__ADSPBF532__) || \ - defined(__ADSPBF533__) || \ - defined(__ADSPBF561__)) && \ - ((defined(__SILICON_REVISION__) && \ - (__SILICON_REVISION__ == 0xffff || __SILICON_REVISION__ <= 0x2)) || \ - defined(__FORCE_LEGACY_WORKAROUNDS__))) - - -/* 05-00-0127 - Signbits instruction not functional under certain conditions -** -** ADSP-BF561 - from rev 0.0 (not yet fixed) -** -** The SIGNBITS instruction requires a NOP before it if one of its operands -** is defined in the preceding instruction. -** -*/ -#define WA_05000127 \ - (defined(__SILICON_REVISION__) && defined(__ADSPBF561__)) - - -/* 05-00-0137 - DMEM_CONTROL<12> is not set on Reset -** -** ADSP-BF531/2/3 - revs 0.0-0.2 (fixed 0.3) -** -** Changes to start code. -** -*/ -#define WA_05000137 \ - ((defined(__ADSPBF531__) || \ - defined(__ADSPBF532__) || \ - defined(__ADSPBF533__)) && \ - ((defined(__SILICON_REVISION__) && \ - (__SILICON_REVISION__ == 0xffff || __SILICON_REVISION__ <= 0x2)) || \ - defined(__FORCE_LEGACY_WORKAROUNDS__))) - - -/* 05-00-0158 - "Boot fails when data cache enabled: Data from a Data Cache -** fill can be corrupted after or during instruction DMA if certain core -** stalls exist" -** -** Impacted: -** BF533/3/1 : 0.0-0.4 (fixed 0.5) -** -** The workaround we have only works for si-revisions >= 0.3. No workaround for -** ealier revisions. -*/ -#define WA_05000158 \ - ((defined(__ADSPBF531__) || \ - defined(__ADSPBF532__) || \ - defined(__ADSPBF533__)) && \ - ((defined(__SILICON_REVISION__) && \ - (__SILICON_REVISION__ == 0xffff || \ - (__SILICON_REVISION__ >= 0x3 && \ - __SILICON_REVISION__ < 0x5))) || \ - defined(__FORCE_LEGACY_WORKAROUNDS__))) - - -/* 05-00-0162 - DMEM_CONTROL<12> is not set on Reset -** -** ADSP-BF561 - revs 0.0-0.2 (fixed 0.3) -** -** Changes to start code. -** -*/ -#define WA_05000162 \ - (defined(__ADSPBF561__) && \ - ((defined(__SILICON_REVISION__) && \ - (__SILICON_REVISION__ == 0xffff || __SILICON_REVISION__ <= 0x2)) || \ - defined(__FORCE_LEGACY_WORKAROUNDS__))) - -/* 05-00-0198 - System MMR accesses may fail when stalled by preceding memory -** read. -** -** Impacted: -** ADSP-BF531 - rev 0.1-0.4 (fixed 0.5) -** ADSP-BF532 - rev 0.1-0.4 (fixed 0.5) -** ADSP-BF533 - rev 0.1-0.4 (fixed 0.5) -** ADSP-BF534 - rev 0.0 (fixed 0.1) -** ADSP-BF536 - rev 0.0 (fixed 0.1) -** ADSP-BF537 - rev 0.0 (fixed 0.1) -** ADSP-BF561 - rev 0.2-0.3 (fixed 0.4) -** -*/ -#define WA_05000198 \ - (((defined(__ADSPBF531__) || \ - defined(__ADSPBF532__) || \ - defined(__ADSPBF533__)) && \ - (defined(__SILICON_REVISION__) && \ - (__SILICON_REVISION__ <= 0x4 || __SILICON_REVISION__ == 0xffff))) || \ - ((defined(__ADSPBF534__) || \ - defined(__ADSPBF536__) || \ - defined(__ADSPBF537__) || \ - defined(__ADSPBF539__)) && \ - (defined(__SILICON_REVISION__) && \ - (__SILICON_REVISION__ == 0x0 || __SILICON_REVISION__ == 0xffff))) || \ - (defined(__ADSPBF561__) && \ - (defined(__SILICON_REVISION__) && \ - (__SILICON_REVISION__ <= 0x3 || __SILICON_REVISION__ == 0xffff)))) - - -/* 05-00-0199 - Current DMA Address Shows Wrong Value During Carry Fix -** -** Impacted: -** ADSP-BF53[123] - rev 0.0-0.3 (fixed 0.4) -** ADSP-BF53[89] - rev 0.0-0.3 (fixed 0.4) -** ADSP-BF561 - rev 0.0-0.3 (fixed 0.4) -** -** Use by System Services/Device Drivers. -*/ -#define WA_05000199 \ - ((defined(__ADSPBF533_FAMILY__) && \ - (defined(__SILICON_REVISION__) && \ - (__SILICON_REVISION__ <= 0x3 || __SILICON_REVISION__ == 0xffff))) || \ - (defined(__ADSPBF538_FAMILY__) && \ - (defined(__SILICON_REVISION__) && \ - (__SILICON_REVISION__ <= 0x3 || __SILICON_REVISION__ == 0xffff))) || \ - (defined(__ADSPBF561__) && \ - (defined(__SILICON_REVISION__) && \ - (__SILICON_REVISION__ <= 0x3 || __SILICON_REVISION__ == 0xffff)))) - - -/* 05-00-0204 - "Incorrect data read with write-through cache and -** allocate cache lines on reads only mode. -** -** This problem is cache related with high speed clocks. It apparently does -** not impact BF531 and BF532 because they cannot run at high enough clock -** to cause the anomaly. We build libs for BF532 though so that means we will -** need to do the workaround for BF532 and BF531 also. -** -** Also the 0.3 to 0.4 revision is not an inflexion for libs BF532 and BF561. -** This means a RT check may be required to avoid doing the WA for 0.4. -** -** Impacted: -** BF533 - 0.0-0.3 (fixed 0.4) -** BF534 - 0.0 (fixed 0.1) -** BF536 - 0.0 (fixed 0.1) -** BF537 - 0.0 (fixed 0.1) -** BF538 - 0.0 (fixed 0.1) -** BF539 - 0.0 (fixed 0.1) -** BF561 - 0.0-0.3 (fixed 0.4) -*/ -#if defined(__ADI_LIB_BUILD__) -# define __BUILDBF53123 1 /* building one single library for BF531/2/3 */ -#else -# define __BUILDBF53123 0 -#endif - -#define WA_05000204 \ - ((((__BUILDBF53123==1 && \ - (defined(__ADSPBF531__) || defined(__ADSPBF532__))) || \ - (defined(__ADSPBF533__) || defined(__ADSPBF561__))) && \ - (defined(__SILICON_REVISION__) && \ - (__SILICON_REVISION__ == 0xffff || __SILICON_REVISION__ <= 0x3))) || \ - ((defined(__ADSPBF534__) || defined(__ADSPBF536__) || \ - defined(__ADSPBF537__) || defined(__ADSPBF538__) || \ - defined(__ADSPBF539__)) && \ - (defined(__SILICON_REVISION__) && \ - (__SILICON_REVISION__ == 0xffff || __SILICON_REVISION__ == 0x0)))) - -#if ((defined(__ADSPBF531__) || defined(__ADSPBF532__) || \ - defined(__ADSPBF533__) || defined(__ADSPBF561__)) && \ - (defined(__SILICON_REVISION__) && \ - (__SILICON_REVISION__ == 0xffff || __SILICON_REVISION__ == 0x3))) -/* check at RT for 0.4 revs when doing 204 workaround */ -# define WA_05000204_CHECK_AVOID_FOR_REV <=3 -#elif ((defined(__ADSPBF534__) || defined(__ADSPBF536__) || \ - defined(__ADSPBF537__) || defined(__ADSPBF538__) || \ - defined(__ADSPBF539__)) && \ - (defined(__SILICON_REVISION__) && \ - (__SILICON_REVISION__ == 0xffff || __SILICON_REVISION__ == 0x0))) -/* check at RT for 0.4 revs when doing 204 workaround */ -# define WA_05000204_CHECK_AVOID_FOR_REV <1 -#else -/* do not check at RT for 0.4 revs when doing 204 workaround */ -#endif - - -/* 05-00-0209 - Speed Path in Computational Unit Affects Certain Instructions -** -** ADSP-BF531/2/3 - revs 0.0 - 0.3 (fixed in 0.4) -** ADSP-BF534/6/7 - rev 0.0 (fixed in 0.1) -** ADSP-BF538/9 - rev 0.0 (fixed in 0.1) -** ADSP-BF561 - revs 0.0 - 0.3 (fixed in 0.4) -** -** SIGNBITS, EXTRACT, DEPOSIT, EXPADJ require a NOP before them if -** one of their operands is defined in the preceding instruction. -*/ -#define WA_05000209 \ - (defined(__SILICON_REVISION__) && \ - (((defined(__ADSPBF531__) || \ - defined(__ADSPBF532__) || \ - defined(__ADSPBF533__)) && \ - (__SILICON_REVISION__ <= 0x3 || __SILICON_REVISION__ == 0xffff)) || \ - ((defined(__ADSPBF534__) || \ - defined(__ADSPBF536__) || \ - defined(__ADSPBF537__) || \ - defined(__ADSPBF538__) || \ - defined(__ADSPBF539__)) && \ - (__SILICON_REVISION__ == 0x0 || __SILICON_REVISION__ == 0xffff)) || \ - ((defined(__ADSPBF561__)) && \ - (__SILICON_REVISION__ <= 0x3 || __SILICON_REVISION__ == 0xffff)))) - - -/* 05-00-0212 - PORTx_FER, PORT_MUX Registers Do Not accept "writes" correctly -** -** Impacted: -** ADSP-BF53[467] - rev 0.0 (fixed 0.1) -** -** Use by System Services/Device Drivers. -*/ -#define WA_05000212 \ - (defined(__ADSPBF537_FAMILY__) && \ - (defined(__SILICON_REVISION__) && \ - (__SILICON_REVISION__ == 0x0 || __SILICON_REVISION__ == 0xffff))) - - -/* 050000244 - "If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control -** Causes Failures" -** -** When instruction cache is enabled, a CSYNC/SSYNC/IDLE around a -** change of control (including asynchronous exceptions/interrupts) -** can cause unpredictable results. -** -** This macro is used by System Services/Device Drivers. -** -** Impacted: -** -** BF531/2/3 - 0.0-0.4 (fixed 0.5) -** BF534/6/7 - 0.0-0.2 (fixed 0.3) -** BF534/8/9 - 0.0-0.1 (fixed 0.2) -** BF561 - 0.0-0.3 (fixed 0.5) -*/ - -#define WA_05000244 \ - (defined(__SILICON_REVISION__) && \ - ((defined(__ADSPBF533_FAMILY__) && \ - (__SILICON_REVISION__ <= 0x4 || __SILICON_REVISION__ == 0xffff)) || \ - (defined(__ADSPBF537_FAMILY__) && \ - (__SILICON_REVISION__ <= 0x2 || __SILICON_REVISION__ == 0xffff)) || \ - (defined(__ADSPBF538_FAMILY__) && \ - (__SILICON_REVISION__ <= 0x1 || __SILICON_REVISION__ == 0xffff)) || \ - (defined(__ADSPBF561_FAMILY__) && \ - (__SILICON_REVISION__ <= 0x3 || __SILICON_REVISION__ == 0xffff)))) - - -/* 050000245 - "False Hardware Error from an Access in the Shadow of a -** Conditional Branch" -** -** If a load accesses reserved or illegal memory on the opposite control -** flow of a conditional jump to the taken path, a false hardware error -** will occur. -** -** This macro is used by System Services/Device Drivers. -** -** This is for all Blackfin LP parts. -*/ - -#define WA_05000245 \ - (defined(__ADSPLPBLACKFIN__) && defined(__SILICON_REVISION__)) - - -/* 050000248 - "TESTSET Operation Forces Stall on the Other Core " -** -** Use by System Services/Device Drivers. -** -** Succeed any testset to L2 with a write to L2 to avoid the other core -** stalling. This must be atomic, as an interrupt between the two would -** cause the lockout to occur until the interrupt is fully serviced. -** -** This macro is used by System Services/Device Drivers. -** -** Impacted: -** -** BF561 - 0.0-0.3 (fixed 0.5) -** -*/ - -#define WA_05000248 \ - (defined (__SILICON_REVISION__) && defined(__ADSPBF561_FAMILY__) && \ - (__SILICON_REVISION__ <= 0x3 || __SILICON_REVISION__ == 0xffff)) - - -/* 05-00-0258 - "Instruction Cache is corrupted when bit 9 and 12 of - * the ICPLB Data registers differ" - * - * When bit 9 and bit 12 of the ICPLB Data MMR differ, the cache may - * not update properly. For example, for a particular cache line, - * the cache tag may be valid while the contents of that cache line - * are not present in the cache. - * - * Impacted: - * - * BF531/2/3 - 0.0-0.4 (fixed 0.5) - * BF534/6/7/8/9 - 0.0-0.2 (fixed 0.3) - * BF561 - 0.0-0.4 (fixed 0.5) - * BF566 - 0.0-0.1 (fixed 0.2) - * BF535/AD6532/AD6900 - all revs - */ -#define WA_05000258 \ - (((defined(__ADSPBF531__) || \ - defined(__ADSPBF532__) || \ - defined(__ADSPBF533__)) && \ - (defined(__SILICON_REVISION__) && \ - (__SILICON_REVISION__ <= 0x4 || \ - __SILICON_REVISION__ == 0xffff))) || \ - ((defined(__ADSPBF534__) || \ - defined(__ADSPBF536__) || \ - defined(__ADSPBF537__) || \ - defined(__ADSPBF538__) || \ - defined(__ADSPBF539__)) && \ - (defined(__SILICON_REVISION__) && \ - (__SILICON_REVISION__ <= 0x2 || \ - __SILICON_REVISION__ == 0xffff))) || \ - (defined(__ADSPBF561__) && \ - (defined(__SILICON_REVISION__) && \ - (__SILICON_REVISION__ <= 0x4 || \ - __SILICON_REVISION__ == 0xffff))) || \ - (defined(__ADSPBF566__) && \ - (defined(__SILICON_REVISION__) && \ - (__SILICON_REVISION__ <= 0x1 || \ - __SILICON_REVISION__ == 0xffff))) || \ - (!defined(__ADSPLPBLACKFIN__) && defined(__SILICON_REVISION__))) - - -/* 05-00-0261 - "DCPLB_FAULT_ADDR MMR may be corrupted". - * The DCPLB_FAULT_ADDR MMR may contain the fault address of a - * aborted memory access which generated both a protection exception - * and a stall. - * - * We work around this by initially ignoring a DCPLB miss exception - * on the assumption that the faulting address might be invalid. - * We return without servicing. The exception will be raised - * again when the faulting instruction is re-executed. The fault - * address is correct this time round so the miss exception can - * be serviced as normal. The only complication is we have to - * ensure that we are about to service the same miss rather than - * a miss raised within a higher-priority interrupt handler, where - * the fault address could again be invalid. We therefore record - * the last seen RETX and only service an exception when RETX and - * the last seen RETX are equal. - * - * This problem impacts: - * BF531/2/3 - rev 0.0-0.4 (fixed 0.5) - * BF534/6/7/8/9 - rev 0.0-0.2 (fixed 0.3) - * BF561 - rev 0.0-0.4 (fixed 0.5) - * - */ - -#define WA_05000261 \ - (((defined(__ADSPBF531__) || \ - defined(__ADSPBF532__) || \ - defined(__ADSPBF533__)) && \ - (defined(__SILICON_REVISION__) && \ - (__SILICON_REVISION__ <= 0x4 || \ - __SILICON_REVISION__ == 0xffff))) || \ - ((defined(__ADSPBF534__) || \ - defined(__ADSPBF536__) || \ - defined(__ADSPBF537__) || \ - defined(__ADSPBF538__) || \ - defined(__ADSPBF539__)) && \ - (defined(__SILICON_REVISION__) && \ - (__SILICON_REVISION__ <= 0x2 || \ - __SILICON_REVISION__ == 0xffff))) || \ - (defined(__ADSPBF561__) && \ - (defined(__SILICON_REVISION__) && \ - (__SILICON_REVISION__ <= 0x4 || \ - __SILICON_REVISION__ == 0xffff)))) - -/* 05-00-0229 - "SPI Slave Boot Mode Modifies Registers". - * When the SPI slave boot completes, the final DMA IRQ is cleared - * but the DMA5_CONFIG and SPI_CTL registers are not reset to their - * default states. - * - * We work around this by resetting the registers to their default - * values at the beginning of the CRT. The only issue would be when - * users boot from flash and make use of the DMA or serial port. - * In this case, users would need to modify the CRT. - * - * This problem impacts all revisions of ADSP-BF531/2/3/8/9 - */ - -#define WA_05000229 \ - (defined(__ADSPBLACKFIN__) && defined (__SILICON_REVISION__) && \ - (defined(__ADSPBF531__) || defined(__ADSPBF532__) || \ - defined(__ADSPBF533__) || defined(__ADSPBF538__) || \ - defined(__ADSPBF539__))) - -/* 05-00-0283 - "A system MMR write is stalled indefinitely when killed in a - * particular stage". - * - * Where an interrupt occurs killing a stalled system MMR write, and the ISR - * executes an SSYNC, execution execution may stall indefinitely". - * - * The workaround is to execute a mispredicted jump over a dummy MMR read, - * thus killing the read. Also to avoid a system MMR write in two slots - * after a not predicted conditional jump. - * - * This problem impacts: - * BF531/2/3 - < 0.6 - * BF534/6/7 - < 0.3 - * BF538/9 - < 0.4 - * BF561/6 - < 0.5 - * - * Since this impacts 538/9 0.3 but not 534 0.3 (the libraries that they use) - * we have to enable this workaround for the 534 0.3 libraries (see bottom - * two lines). - */ - -#define WA_05000283 \ - (defined (__SILICON_REVISION__) && \ - (((defined(__ADSPBF531__) || \ - defined(__ADSPBF532__) || \ - defined(__ADSPBF533__)) && \ - (__SILICON_REVISION__ == 0xffff || \ - __SILICON_REVISION__ < 0x6)) || \ - ((defined(__ADSPBF534__) || \ - defined(__ADSPBF536__) || \ - defined(__ADSPBF537__)) && \ - (__SILICON_REVISION__ == 0xffff || \ - __SILICON_REVISION__ < 0x3)) || \ - ((defined(__ADSPBF538__) || \ - defined(__ADSPBF539__)) && \ - (__SILICON_REVISION__ == 0xffff || \ - __SILICON_REVISION__ < 0x4)) || \ - (defined(__ADSPBF561__)) || \ - (defined(__ADSPBF534__) && __SILICON_REVISION__ == 0x3 && \ - defined(__ADI_LIB_BUILD__)))) - - -/* 05-00-0311 - Erroneous Flag (GPIO) Pin Operations under Specific Sequences -** -** Impacted: -** ADSP-BF53[123] - 0.0-0.5 (fixed in 0.6) -** -** Use by System Services/Device Drivers. -*/ -#define WA_05000311 \ - (defined(__ADSPBF533_FAMILY__) && \ - (defined(__SILICON_REVISION__) && \ - (__SILICON_REVISION__ <= 0x5 || __SILICON_REVISION__ == 0xffff))) - - -/* 05-00-0312 - Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers - -** Are Interrupted -** -** Impacted: -** ADSP-BF53[123] - 0.0-0.5 (fixed in 0.6) -** ADSP-BF53[467] - all supported revisions -** ADSP-BF53[89] - 0.0-0.4 (fixed in 0.5) -** ADSP-BF561 - all supported revisions -** ADSP-BF54[24789] - 0.0 (fixed in 0.1) -** -** Used by VDK -*/ -#define WA_05000312 \ - (defined(__SILICON_REVISION__) && \ - (defined(__ADSPBF533_FAMILY__) && \ - (__SILICON_REVISION__ <= 0x5 || __SILICON_REVISION__ == 0xffff)) || \ - (defined(__ADSPBF537_FAMILY__)) || \ - (defined(__ADSPBF538_FAMILY__) && \ - (__SILICON_REVISION__ <= 0x4 || __SILICON_REVISION__ == 0xffff)) || \ - (defined(__ADSPBF548_FAMILY__) && \ - (__SILICON_REVISION__ == 0x0 || __SILICON_REVISION__ == 0xffff)) || \ - (defined(__ADSPBF561_FAMILY__))) - - -/* 05-00-0323 - Erroneous Flag (GPIO) Pin Operations under Specific Sequences -** -** Impacted: -** ADSP-BF561 - all supported revisions -** -** Use by System Services/Device Drivers. -*/ -#define WA_05000323 \ - (defined(__ADSPBF561__) && defined(__SILICON_REVISION__)) - - -/* 05-00-0365 - DMAs that Go Urgent during Tight Core Writes to External -** Memory Are Blocked -** -** Impacted: -** ADSP-BF54[24789] - all supported revisions -** ADSP-BF54[24789]M - all supported revisions -** -** Use by System Services/Device Drivers. -*/ -#define WA_05000365 \ - ((defined(__ADSPBF548_FAMILY__) || defined(__ADSPBF548M_FAMILY__)) && \ - defined(__SILICON_REVISION__)) - - -/* 05-00-0371 - Possible RETS Register Corruption when Subroutine Is under -** 5 Cycles in Duration -** -** This problem impacts: -** BF531/2/3 - 0.0-0.5 (fixed in 0.6) -** BF534/6/7 - 0.0-0.3 -** BF538/9 - 0.0-0.4 (fixed in 0.5) -** BF561 - 0.0-0.5 -** BF542/4/7/8/9 - 0.0-0.1 (fixed in 0.2) -** BF523/5/7 - 0.0-0.1 (fixed in 0.2) -** -*/ - -#define WA_05000371 \ - (defined(__SILICON_REVISION__) && \ - (defined(__ADSPBF533_FAMILY__) && \ - (__SILICON_REVISION__ <= 0x5 || __SILICON_REVISION__ == 0xffff)) || \ - (defined(__ADSPBF537_FAMILY__) && \ - (__SILICON_REVISION__ <= 0x3 || __SILICON_REVISION__ == 0xffff)) || \ - (defined(__ADSPBF538_FAMILY__) && \ - (__SILICON_REVISION__ <= 0x4 || __SILICON_REVISION__ == 0xffff)) || \ - (defined(__ADSPBF548_FAMILY__) && \ - (__SILICON_REVISION__ <= 0x1 || __SILICON_REVISION__ == 0xffff)) || \ - (defined(__ADSPBF527_FAMILY__) && \ - (__SILICON_REVISION__ <= 0x1 || __SILICON_REVISION__ == 0xffff)) || \ - (defined(__ADSPBF561__) || defined(__ADSPBF566__))) - - -/* 05-00-0380 - Data Read From L3 Memory by USB DMA May be Corrupted -** -** Impacted: -** ADSP-BF52[357] - rev 0.0-0.1 (fixed 0.2) -** -** Use by System Services/Device Drivers. -*/ -#define WA_05000380 \ - (defined(__ADSPBF527_FAMILY__) && \ - (defined(__SILICON_REVISION__) && \ - (__SILICON_REVISION__ <= 0x1 || __SILICON_REVISION__ == 0xffff))) - - -/* 05-00-0412 - "TESTSET Instruction Causes Data Corruption with Writeback Data - * Cache Enabled" - * - * If you use the testset instruction to operate on L2 memory and you have data - * in external memory that is cached using WB mode, data in external memory - * and/or L2 memory can be corrupted. - * - * Workaround: Either do not use writeback cache or precede the TESTSET - * instruction with an SSYNC instruction. If preceding the TESTSET instruction - * by an SSYNC instruction, do the following: - * - * CLI R0 - * R1 = [P0] // perform a dummy read to make sure CPLB is installed - * NOP - * NOP - * SSYNC - * TESTSET (P0) - * STI R0 - * - * This problem impacts: - * BF561/6 - rev 0.0-0.5 - * - */ - -#define WA_05000412 \ - (defined (__SILICON_REVISION__) && defined(__ADSPBF561__)) - - -/* 05-00-0426 - Speculative Fetches of Indirect-Pointer Instructions Can -** Cause False Hardware Errors -** -** -** A false hardware error is generated if there is an indirect jump or -** call through a pointer which may point to reserved or illegal memory -** on the opposite control flow of a conditional jump to the taken path. -** This commonly occurs when using function pointers, which can be -** invalid (e.g., set to -1). -** -** Workaround: If instruction cache is on or the ICPLBs are enabled, -** this anomaly does not apply. If instruction cache is off and ICPLBs -** are disabled, the indirect pointer instructions must be 2 instructions -** away from the branch instruction, which can be implemented using NOPs: -** -** -** Impacted: -** All parts and revisions other than BF535 based parts. -** -** Used by System Services/Device Drivers. -*/ -#define WA_05000426 \ - (defined(__ADSPLPBLACKFIN__) && defined(__SILICON_REVISION__)) - - -/* 05-00-0428 - "Lost/Corrupted Write to L2 Memory Following Speculative Read - * by Core B from L2 Memory" - * - * This issue occurs only when the accesses are performed by core B of a BF561. - * - * When a write to internal L2 memory follows a speculative read from internal - * L2 memory, the L2 write may be lost or corrupted. For this anomaly to occur, - * the speculative read must be caused by a read in the shadow of a branch. The - * accesses do not have to be consecutive accesses. In other words, the problem - * can occur even if there are multiple instructions between the speculative - * read and the write, as shown in the following example: - * - * R1 = 1; R2 = 1; - * CC = R1 == R2; - * IF CC JUMP X; // Always true... - * R0 = [P0]; // If any of these three loads accesses L2 memory from Core - * R1 = [P1]; // B, speculative execution in the pipeline causes the - * R2 = [P2]; // anomaly trigger condition. - * X: - * ... // Any number of instructions... - * [P0] = R0; // This write can be corrupted or lost. - * - * The issue does not occur if the speculative read access is caused by an - * interrupt or exception. - * - * The workaround required depends upon the conditional branch instruction. - * If the evaluated condition is true and the branch is predicted, then the - * workaround is to ensure that the target instruction is not be a load - * instruction, for example: - * - * IF CC JUMP X (BP); - * ... - * X: <load that might be from L2 memory> - * - * If the evaluated condition is false and the branch is not predicted, then - * the workaround is to make sure that none of the three instructions that - * are executed after the conditional JUMP are load instructions, for example: - * - * IF CC JUMP ...; - * <load that might be from L2 memory> - * <load that might be from L2 memory> - * <load that might be from L2 memory> - * - * This problem impacts: - * BF561 - rev 0.4,0.5 - * - */ - -#define WA_05000428 \ - (defined(__SILICON_REVISION__) && \ - defined(__ADSPBF561__) && \ - ((__SILICON_REVISION__ == 0xffff) || \ - (__SILICON_REVISION__ == 0x4) || \ - (__SILICON_REVISION__ == 0x5))) - - -/* 05-00-0443 - IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall -** -** Impacted: -** All parts and revisions other than BF535 based parts. -** -** Used by System Services/Device Drivers. -*/ -#define WA_05000443 \ - (defined(__ADSPLPBLACKFIN__) && defined(__SILICON_REVISION__)) - -#ifdef _MISRA_RULES -#pragma diag(pop) -#endif /* _MISRA_RULES */ - |