diff options
Diffstat (limited to 'libgloss/sparc/Makefile.in')
| -rw-r--r-- | libgloss/sparc/Makefile.in | 286 |
1 files changed, 286 insertions, 0 deletions
diff --git a/libgloss/sparc/Makefile.in b/libgloss/sparc/Makefile.in new file mode 100644 index 000000000..fcf5448a3 --- /dev/null +++ b/libgloss/sparc/Makefile.in @@ -0,0 +1,286 @@ +# Copyright (c) 1995, 1996, 1997 Cygnus Support +# +# The authors hereby grant permission to use, copy, modify, distribute, +# and license this software and its documentation for any purpose, provided +# that existing copyright notices are retained in all copies and that this +# notice is included verbatim in any distributions. No written agreement, +# license, or royalty fee is required for any of the authorized uses. +# Modifications to this software may be copyrighted by their authors +# and need not follow the licensing terms described here, provided that +# the new terms are clearly indicated on the first page of each file where +# they apply. + +# Makefile for libgloss/sparc. This is the board support +# code for the various sparc targets. + +VPATH = @srcdir@ +srcdir = @srcdir@ +objdir = . +srcroot = $(srcdir)/../.. +objroot = $(objdir)/../.. + +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +host_alias = @host_alias@ +target_alias = @target_alias@ + +bindir = @bindir@ +libdir = @libdir@ +tooldir = $(exec_prefix)/$(target_alias) + +# Multilib support variables. +# TOP is used instead of MULTI{BUILD,SRC}TOP. +MULTIDIRS = +MULTISUBDIR = +MULTIDO = true +MULTICLEAN = true + +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ + +SHELL = /bin/sh + +CC = @CC@ + +AS = @AS@ +AR = @AR@ +LD = @LD@ +RANLIB = @RANLIB@ +AR_FLAGS = qrv + +OBJDUMP = `if [ -f ${objroot}/../binutils/objdump ] ; \ + then echo ${objroot}/../binutils/objdump ; \ + else t='$(program_transform_name)'; echo objdump | sed -e $$t ; fi` +OBJCOPY = `if [ -f ${objroot}/../binutils/objcopy ] ; \ + then echo ${objroot}/../binutils/objcopy ; \ + else t='$(program_transform_name)'; echo objcopy | sed -e $$t ; fi` + +CYGMON_CRT0 = cygmon-crt0.o +CYGMON_BSP = libcygmon.a +CYGMON_OBJS = cygmon-salib.o + +701_CRT0 = crt0-701.o +701_BSP = libsplet701.a +701_OBJS = sysc-701.o salib-701.o sparclet-stub.o + +930_BSP = libslite930.a +931_BSP = libslite931.a +934_BSP = libslite934.a +86X_BSP = libslite86x.a + +# for the time being, built the stub without hardware breakpoint support +SLITE_OBJS = salib.o sparcl-stub.o cache.o + +# ERC32: SIS simulator, see sim/erc32. +ERC32_CRT0 = erc32-crt0.o +ERC32_BSP = liberc32.a +ERC32_OBJS = erc32-io.o traps.o erc32-stub.o debug.o fixctors.o +ERC32_ALL = $(ERC32_CRT0) $(ERC32_BSP) + +CRT0 = crt0.o +OBJS = close.o fstat.o getpid.o isatty.o kill.o \ + lseek.o open.o print.o putnum.o read.o sbrk.o stat.o \ + unlink.o write.o + +# This is set to one of SPARC, SLITE, or SPLET by configure. +# It's not clear what to do here. +# One could certainly build everything. The assembler supports all cpu +# variants (via runtime switches). However, the compiler [currently] doesn't. +# Of course, it may be the case that there isn't any cpu specific code in +# C source files, but there might be in the future. +CPU = @CPU@ + +# sparc stuff (not sparclite or sparclet) +SPARC_ALL = $(CYGMON_BSP) $(CYGMON_CRT0) $(objdir)/cygmon.ld +SPARC_INSTALL = sparc-install +SPARC_OBJ_FORMAT = sparc +SPARC_RAM_START = 0x4000 + +# sparc 64 stuff +SPARC64_ALL = $(CYGMON_BSP) $(CYGMON_CRT0) $(objdir)/cygmon.ld +SPARC64_INSTALL = sparc-install +SPARC64_OBJ_FORMAT = sparc:v9 +SPARC64_RAM_START = 0x4000 + +# sparclite stuff +SLITE_ALL = $(930_BSP) $(931_BSP) $(CYGMON_BSP) $(CYGMON_CRT0) $(objdir)/cygmon.ld $(934_BSP) $(86X_BSP) +SLITE_INSTALL = slite-install +SLITE_OBJ_FORMAT = sparc +SLITE_RAM_START = 0x40050000 + +# sparclet stuff +SPLET_ALL = $(701_CRT0) $(701_BSP) +SPLET_INSTALL = splet-install + +#### Host specific Makefile fragment comes in here. +@host_makefile_frag@ + +all: ${CRT0} $($(CPU)_ALL) $(ERC32_ALL) + +$(CYGMON_CRT0): cygmon-crt0.S + $(CC) $(CFLAGS_FOR_TARGET) $(CFLAGS) -DTARGET_CPU_$(CPU) $(INCLUDES) -o $@ -c $(srcdir)/cygmon-crt0.S + +$(CYGMON_BSP): $(CYGMON_OBJS) + @rm -f $@ + ${AR} ${AR_FLAGS} $@ $(CYGMON_OBJS) + ${RANLIB} $@ + +#$(STUBLIBS): $(OBJS) $(SLITE_OBJS) $(CRT0) +# ${CC} -nostdlib -r $(SLITE_OBJS) $(SHARED_OBJS) -o $(930_BSP) +# ${CC} -DSL931 -nostdlib -r $(SLITE_OBJS) $(SHARED_OBJS) -o $(931_BSP) +# ${CC} -nostdlib -r $(SLITE_OBJS) $(SHARED_OBJS) -o $(934_BSP) + +$(CRT0): $(srcdir)/crt0.S $(srcdir)/asm.h $(srcdir)/slite.h + $(CC) $(CFLAGS_FOR_TARGET) $(CFLAGS) $(INCLUDES) -o $@ -c $(srcdir)/crt0.S + +$(930_BSP) $(931_BSP) $(934_BSP) $(86X_BSP): $(OBJS) $(SLITE_OBJS) + @rm -f $@ + ${AR} ${AR_FLAGS} $@ $(OBJS) $(SLITE_OBJS) + ${RANLIB} $@ + +$(701_BSP): $(701_OBJS) + @rm -f $@ + ${AR} ${AR_FLAGS} $@ $(701_OBJS) + ${RANLIB} $@ + +erc32-crt0.o: $(srcdir)/erc32-crt0.S $(srcdir)/asm.h $(srcdir)/slite.h + $(CC) $(CFLAGS_FOR_TARGET) $(CFLAGS) $(INCLUDES) -o $@ -c $(srcdir)/erc32-crt0.S + +liberc32.a: $(OBJS) $(ERC32_OBJS) + @rm -f $@ + ${AR} ${AR_FLAGS} $@ $(OBJS) $(ERC32_OBJS) + ${RANLIB} $@ + +crt0-701.o: crt0-701.S +sysc-701.o: sysc-701.c +salib-701.o: salib-701.c +sparclet-stub.o: sparclet-stub.c +cygmon-salib.o: cygmon-salib.c + $(CC) -DTARGET_CPU_$(CPU) $(CFLAGS_FOR_TARGET) $(CFLAGS) $(INCLUDES) -o $@ -c $(srcdir)/cygmon-salib.c +cache.o: $(srcdir)/cache.c +salib.o: $(srcdir)/salib.c +win.o: $(srcdir)/win.S +syscalls.o: $(srcdir)/syscalls.c +sparcl-stub.o: $(srcdir)/sparcl-stub.c $(srcdir)/../debug.h $(srcdir)/../debug.c +erc32-stub.o: $(srcdir)/erc32-stub.c $(srcdir)/../debug.h $(srcdir)/../debug.c +fixctors.o : $(srcdir)/fixctors.c + +$(objdir)/cygmon.ld: @CYGMONLDSCRIPTTEMPL@ + sed 's/TARGET_OBJ_FORMAT/$($(CPU)_OBJ_FORMAT)/g;s/TARGET_RAM_START/$($(CPU)_RAM_START)/g;' < $(<) > $(objdir)/cygmon.ld + +install: $($(CPU)_INSTALL) + $(INSTALL_DATA) $(CRT0) $(tooldir)/lib${MULTISUBDIR}/$(CRT0) + +sparc-install: + $(INSTALL_DATA) $(CYGMON_BSP) $(tooldir)/lib${MULTISUBDIR} + $(INSTALL_DATA) $(CYGMON_OBJS) $(tooldir)/lib${MULTISUBDIR} + $(INSTALL_DATA) $(objdir)/cygmon.ld $(tooldir)/lib${MULTISUBDIR} + $(INSTALL_DATA) $(CYGMON_CRT0) $(tooldir)/lib${MULTISUBDIR} + +slite-install: + $(INSTALL_DATA) $(930_BSP) $(tooldir)/lib${MULTISUBDIR}/$(930_BSP) + $(INSTALL_DATA) $(931_BSP) $(tooldir)/lib${MULTISUBDIR}/$(931_BSP) + $(INSTALL_DATA) $(934_BSP) $(tooldir)/lib${MULTISUBDIR}/$(934_BSP) + $(INSTALL_DATA) $(86X_BSP) $(tooldir)/lib${MULTISUBDIR}/$(86X_BSP) + $(INSTALL_DATA) $(srcdir)/ex930.ld $(tooldir)/lib${MULTISUBDIR} + $(INSTALL_DATA) $(srcdir)/ex931.ld $(tooldir)/lib${MULTISUBDIR} + $(INSTALL_DATA) $(srcdir)/ex934.ld $(tooldir)/lib${MULTISUBDIR} + $(INSTALL_DATA) $(srcdir)/sparc86x.ld $(tooldir)/lib${MULTISUBDIR} + $(INSTALL_DATA) $(srcdir)/elfsim.ld $(tooldir)/lib${MULTISUBDIR} + $(INSTALL_DATA) $(ERC32_CRT0) $(tooldir)/lib${MULTISUBDIR} + $(INSTALL_DATA) $(ERC32_BSP) $(tooldir)/lib${MULTISUBDIR} + $(INSTALL_DATA) $(objdir)/traps.o $(tooldir)/lib${MULTISUBDIR} + $(INSTALL_DATA) $(CYGMON_BSP) $(tooldir)/lib${MULTISUBDIR} + $(INSTALL_DATA) $(CYGMON_OBJS) $(tooldir)/lib${MULTISUBDIR} + $(INSTALL_DATA) $(objdir)/cygmon.ld $(tooldir)/lib${MULTISUBDIR} + $(INSTALL_DATA) $(CYGMON_CRT0) $(tooldir)/lib${MULTISUBDIR} + +splet-install: + $(INSTALL_DATA) $(701_CRT0) $(tooldir)/lib${MULTISUBDIR}/$(701_CRT0) + $(INSTALL_DATA) $(701_BSP) $(tooldir)/lib${MULTISUBDIR}/$(701_BSP) + $(INSTALL_DATA) $(srcdir)/tsc701.ld $(tooldir)/lib${MULTISUBDIR} + +# Make a simple test case to test the linker script, startup code, and +# I/O code +# +test: ex930-test.x ex931-test.x erc32-test.x + @echo Done... + +# compile a fully linked binary. The -N option is for a.out, so the +# base address will be zero, rather than the default of 0x2020. The +# -Wl,-T*.ld is for the linker script. By using -Wl, the linker script +# is put on the proper place in the comand line for ld, and all the +# symbols will get fully resolved. + +erc32-test.x: test.o ${ERC32_CRT0} ${srcdir}/erc32.ld Makefile ${ERC32_BSP} + ${CC} -L${srcdir} -L${objdir} test.o -o $@ $(LDFLAGS_FOR_TARGET) \ + -N -Wl,-Terc32.ld -Wl,-Map -Wl,erc32.map -nostdlib +erc32-test.srec: erc32-test.x + $(OBJCOPY) -O srec erc32-test.x $@ +erc32-test.dis: erc32-test.x + @rm -fr erc32-test.dis + $(OBJDUMP) -d erc32-test.x > $@ +erc32-test: erc32-test.srec erc32-test.dis + +ex930-test.x: test.o ${CRT0} ${srcdir}/ex930.ld Makefile ${930_BSP} + ${CC} -L${srcdir} -L${objdir} test.o -o $@ $(LDFLAGS_FOR_TARGET) \ + -N -Wl,-Tex930.ld -nostdlib +ex930-test.srec: ex930-test.x + $(OBJCOPY) -O srec ex930-test.x $@ +ex930-test.dis: ex930-test.x + @rm -fr ex930-test.dis + $(OBJDUMP) -d ex930-test.x > $@ +ex930-test: ex930-test.srec ex930-test.dis + +ex931-test.x: test.o ${CRT0} ${srcdir}/ex931.ld Makefile ${931_BSP} + ${CC} -L${srcdir} -L${objdir} test.o -o $@ $(LDFLAGS_FOR_TARGET) \ + -N -Wl,-Tex931.ld -nostdlib +ex931-test.srec: ex931-test.x + $(OBJCOPY) -O srec ex931-test.x $@ +ex931-test.dis: ex931-test.x + @rm -fr ex931-test.dis + $(OBJDUMP) -d ex931-test.x > $@ +ex931-test: ex931-test.srec ex931-test.dis + +ex934-test.x: test.o ${CRT0} ${srcdir}/ex934.ld Makefile ${934_BSP} + ${CC} -L${srcdir} -L${objdir} test.o -o $@ $(LDFLAGS_FOR_TARGET) \ + -N -Wl,-Tex934.ld -nostdlib +ex934-test.srec: ex934-test.x + $(OBJCOPY) -O srec ex934-test.x $@ +ex934-test.dis: ex934-test.x + @rm -fr ex934-test.dis + $(OBJDUMP) -d ex934-test.x > $@ +ex934-test: ex934-test.srec ex934-test.dis + +# a C++ test case +dtor.o: $(srcdir)/dtor.C + $(CC) $(CFLAGS_FOR_TARGET) $(INCLUDES) -o $@ -c $? +dtor.dis: dtor.x + @rm -fr dtor.dis + $(OBJDUMP) -d dtor.x > $@ +dtor.x: dtor.o ${ERC32_CRT0} ${srcdir}/erc32.ld Makefile ${ERC32_BSP} + ${CC} -L${srcdir} -L${objdir} dtor.o -o $@ $(LIBS_FOR_TARGET) \ + -N -Wl,-Terc32.ld + +# target specific makefile fragment comes in here. +@target_makefile_frag@ + +clean mostlyclean: + rm -f *.o *.a *.map *.x + +distclean maintainer-clean realclean: clean + rm -f Makefile config.cache config.log config.status + +.PHONY: info dvi doc install-info clean-info +info doc dvi: +install-info: +clean-info: + +Makefile: Makefile.in config.status @host_makefile_frag_path@ \ + @target_makefile_frag_path@ + $(SHELL) config.status + +config.status: configure + $(SHELL) config.status --recheck |