diff options
Diffstat (limited to 'winsup/doc/how-using.texinfo')
-rw-r--r-- | winsup/doc/how-using.texinfo | 582 |
1 files changed, 0 insertions, 582 deletions
diff --git a/winsup/doc/how-using.texinfo b/winsup/doc/how-using.texinfo deleted file mode 100644 index 08e238f4e..000000000 --- a/winsup/doc/how-using.texinfo +++ /dev/null @@ -1,582 +0,0 @@ -@section Using Cygwin - -@subsection How should I set my PATH? - -If you look at the "Cygwin 1.1.0" (or similar) shortcut created in the -"Cygnus Solutions" programs folder, you'll see that it runs -@code{C:\cygwin\bin\cygwin.bat} (assuming your root is -@code{C:\cygwin}). The contents should look something like this: - -@example - @@echo off - SET MAKE_MODE=unix - SET PATH=C:\cygwin\bin;C:\cygwin\usr\local\bin;%PATH% - bash -@end example - -Effectively, this @strong{prepends} /usr/bin and /usr/local/bin to your -Windows system path. If you choose to reset your PATH, say in -$HOME/.bashrc, then you should follow this rule. You @strong{must} have -@code{/usr/bin} in your PATH @strong{before} any Windows system -directories. (And you must not omit the Windows system directories!) -Otherwise you will likely encounter all sorts of problems -running Cygwin applications. - -If you haven't messed up the default mounts, then @code{/bin} and -@code{/usr/bin} are the same location, so you only need one of them in -your PATH. You should use @code{/usr/local/bin} for installing -additional Cygwin applications that are not part of the core net -release. (That is, anything not found in an ftp mirror of @code{latest} -and installed by @code{setup.exe}.) - -@subsection Bash says "command not found", but it's right there! - -If you compile a program, you might find that you can't run it: - -@example - bash$ gcc -o hello hello.c - bash$ hello - bash: hello: command not found -@end example - -Unlike Windows, bash does not look for programs in @samp{.} (the current -directory) by default. You can add @samp{.} to your PATH (see above), -but this is not recommended (at least on UNIX) for security reasons. -Just tell bash where to find it, when you type it on the command line: - -@example - bash$ gcc -o hello hello.c - bash$ ./hello - Hello World! -@end example - -@subsection How do I convert between Windows and UNIX paths? - -Use the 'cygpath' utility. Type '@code{cygpath}' with no arguments to -get usage information. For example (on my installation): -@example - bash$ cygpath --windows ~/.bashrc - D:\starksb\.bashrc - bash$ cygpath --unix C:/cygwin/bin/cygwin.bat - /usr/bin/cygwin.bat - bash$ cygpath --unix C:\\cygwin\\bin\\cygwin.bat - /usr/bin/cygwin.bat -@end example -Note that bash interprets the backslash '\' as an escape character, so -you must type it twice in the bash shell if you want it to be recognized -as such. - -@subsection Why doesn't bash read my .bashrc file on startup? - -Your .bashrc is read from your home directory specified by the HOME -environment variable. It uses /.bashrc if HOME is not set. So you need -to set HOME correctly, or move your .bashrc to the top of the drive -mounted as / in Cygwin. - -@subsection How can I get bash filename completion to be case insensitive? - -"shopt -s nocaseglob" should do the trick. - -@subsection Can I use paths/filenames containing spaces in them? - -Cygwin does support spaces in filenames and paths. That said, some -utilities that use the library may not, since files don't typically -contain spaces in Unix. If you stumble into problems with this, you -will need to either fix the utilities or stop using spaces in filenames -used by Cygwin tools. - -In particular, bash interprets space as a word separator. You would have -to quote a filename containing spaces, or escape the space character. -For example: -@example - bash-2.03$ cd '/cygdrive/c/Program Files' -@end example -or -@example - bash-2.03$ cd /cygdrive/c/Program\ Files -@end example - -@subsection Why can't I cd into a shortcut to a directory? - -This is only valid up to but not including version 1.3.0: - -Cygwin does not follow MS Windows Explorer Shortcuts (*.lnk files). It -sees a shortcut as a regular file and this you cannot "cd" into it. - -Some people have suggested replacing the current symbolic link scheme -with shortcuts. The major problem with this is that .LNK files would -then be used to symlink Cygwin paths that may or may not be valid -under native Win32 non-Cygwin applications such as Explorer. - -Since version 1.3.0, Cygwin treats shortcuts as symlinks. - -@subsection I'm having basic problems with find. Why? - -Make sure you are using the find that came with Cygwin and that you -aren't picking up the Win32 find command instead. You can verify that -you are getting the right one by doing a "type find" in bash. - -If the path argument to find, including current directory (default), is -itself a symbolic link, then find will not traverse it unless you -specify the @samp{-follow} option. This behavior is different than most -other UNIX implementations, but is not likely to change. - -@subsection Why doesn't man work? - -Even after installing the @samp{man} package, you get an error like this: - -@example - bash-2.03$ man man - Error executing formatting or display command. - System command (cd /usr/man ; (echo -e ".pl 1100i"; cat /usr/man/man1/man.1; echo ".pl \n(nlu+10") | /usr/bin/tbl | /usr/bin/groff -Tascii -mandoc | less -is) exited with status 32512. - No manual entry for man -@end example - -You also need /bin/sh, which is found in the @samp{ash} package. -Install this too. - -@subsection Why doesn't chmod work? - -@samp{ntsec} will allow UNIX permissions in Windows NT on NTFS file systems. - -@samp{ntea} works on NTFS @emph{and} FAT but it creates a huge, -@strong{undeletable} file on FAT filesystems. - -(The @samp{ntsec} and @samp{ntea} settings are values for the -@samp{CYGWIN} environment variable. See the Cygwin User's Guide at -@file{http://cygwin.com/cygwin-ug-net/cygwin-ug-net.html} for more -information on this variable and its settings.) - -There is no solution at all for Windows 9x. - -If you have an application that requires a certain permission mode on a -file, you may be able to work around this requirement by modifying the -application's source code. For a hint, based on work done by Corinna -Vinschen for OpenSSH, see this message from the cygwin mailing list: -@file{http://cygwin.com/ml/cygwin/2000-11/msg01176.html}. - -@subsection Why doesn't @samp{mkdir -p} work on a network share? - -Unfortunately, you cannot do something like this: - -@example -bash$ mkdir -p //MACHINE/Share/path/to/new/dir -mkdir: cannot create directory `//MACHINE': No such file or directory -@end example - -This is because mkdir checks for the existence of each directory on the -path, creating them as necessary. Since @samp{//MACHINE} is not a -directory (you can't cd to it either), mkdir tries to create it, and -fails. - -This might get fixed someday, but for now, you have to work around it: - -@example -bash$ cd //MACHINE/Share -bash$ mkdir -p path/to/new/dir -@end example - -@subsection Why doesn't my script work? - -There are two basic problems you might run into. One is the fact that -/bin/sh is really ash, and is missing some features you might expect in -/bin/sh. For example: - -@itemize bullet -@item No job control -@item No getopts -@item No functions exported -@end itemize - -Or it could be a permission problem, and Cygwin doesn't understand that -your script is executable. Because @samp{chmod} may not work (see FAQ -entry above), Cygwin must read the contents of files to determine if -they are executable. If your script does not start with - -@example - #! /bin/sh -@end example - -(or any path to a script interpreter, it does not have to be /bin/sh) -then Cygwin will not know it is an executable script. The Bourne shell -idiom - -@example - : - # This is the 2nd line, assume processing by /bin/sh -@end example - -also works. - -Note that you can use @samp{mount -x} to force Cygwin to treat all files -under the mount point as executable. This can be used for individual -files as well as directories. Then Cygwin will not bother to read files -to determine whether they are executable. - -@subsection Why don't cursor keys work under Win95/Win98? - -@strong{(Please note: This section has not yet been updated for the latest -net release.)} - -Careful examination shows that they not just non-functional, but -rather behave strangely, for example, with NumLock off, keys on numeric -keyboard work, until you press usual cursor keys, when even numeric -stop working, but they start working again after hitting alphanumeric -key, etc. This reported to happen on localized versions of Win98 and -Win95, and not specific to Cygwin (there're known cases of Alt+Enter -(fullscreen/windowed toggle) not working and shifts sticking with -other programs). The cause of this problem is Microsoft keyboard -localizer which by default installed in 'autoexec.bat'. Corresponding -line looks like: - -@example -keyb ru,,C:\WINDOWS\COMMAND\keybrd3.sys -@end example - -(That's for russian locale.) You should comment that line if you want -your keys working properly. Of course, this will deprive you of your -local alphabet keyboard support, so you should think about -another localizer. exUSSR users are of course knowledgeable of Keyrus -localizer, and it might work for other locales too, since it has keyboard -layout editor. But it has russian messages and documentation ;-( -Reference URL is http://www.hnet.ru/software/contrib/Utils/KeyRus/ -(note the you may need to turn off Windows logo for Keyrus to operate -properly). - -@subsection Is it OK to have multiple copies of the DLL? - -You should only have one copy of the Cygwin DLL on your system. If you -have multiple versions, they will conflict and cause problems. - -If you get the error "shared region is corrupted" or "shared region -version mismatch" it means you have multiple versions of cygwin1.dll -running at the same time. This could happen, for example, if you update -cygwin1.dll without exiting @emph{all} Cygwin apps (including inetd) -beforehand. - -If you're trying to find multiple versions of the DLL that are causing -this problem, reboot first, in case DLL's still loaded in memory are the -cause. Then use the Windows System find utility to search your whole -machine, not just components in your PATH (as 'type' would do) or -cygwin-mounted filesystems (as Cygwin 'find' would do). - -@subsection Where can I find "more"? - -If you are looking for the "more" pager, you should use the "less" pager -instead. - -@subsection Where can I find "which"? - -There is no "which" command with Cygwin. However, you can use the bash -shell builtin "type" which does something similar. - -@subsection Why isn't package XXXX available in Cygwin? (Or, why is your package so out of date?) - -Probably because there is nobody willing or able to maintain it. It -takes time, and the priority for the Cygwin Team is the Cygwin package. -The rest is a volunteer effort. Want to contribute? See below. - -@subsection How can I access other drives? - -You have some flexibility here. - -Cygwin has a builtin "cygdrive prefix" for drives that are not mounted. -You can access any drive, say Z:, as '/cygdrive/z/'. - -In some applications (notably bash), you can use the familiar windows -<drive>:/path/, using posix forward-slashes ('/') instead of Windows -backward-slashes ('\'). (But see the warning below!) This maps in the -obvious way to the Windows path, but will be converted internally to use -the Cygwin path, following mounts (default or explicit). For example: -@example - bash$ cd C:/Windows - bash$ pwd - /cygdrive/c/Windows -@end example -and -@example - bash$ cd C:/cygwin - bash$ pwd - / -@end example -for a default setup. You could also use backward-slashes in the -Windows path, but these would have to be escaped from the shell. - -@strong{Warning:} There is some ambiguity in going from a Windows path -to the posix path, because different posix paths, through different -mount points, could map to the same Windows directory. This matters -because different mount points may be binmode or textmode, so the -behavior of Cygwin apps will vary depending on the posix path used to -get there. - -You can avoid the ambiguity of Windows paths, and avoid typing -"/cygdrive", by explicitly mounting drives to posix paths. For example: -@example - bash$ mkdir /c - bash$ mount c:/ /c - bash$ ls /c -@end example -Then @samp{/cygdrive/c/Windows} becomes @samp{/c/Windows} which is a -little less typing. - -Note that you only need to mount drives once. The mapping is kept -in the registry so mounts stay valid pretty much indefinitely. -You can only get rid of them with umount, or the registry editor. - -The '-b' option to mount mounts the mountpoint in binary mode -("binmode") where text and binary files are treated equivalently. This -should only be necessary for badly ported Unix programs where binary -flags are missing from open calls. It is also the setting for /, -/usr/bin and /usr/lib in a default Cygwin installation. The default for -new mounts is text mode ("textmode"), which is also the mode for all -"cygdrive" mounts. - -You can change the default @samp{cygdrive} prefix and whether it is -binmode or textmode using the @code{mount} command. For example, -@example - bash$ mount -b --change-cygdrive-prefix cygdrive -@end example -will change all @code{/cygdrive/...} mounts to binmode. - -@subsection How can I copy and paste into Cygwin console windows? - -Under Windows NT, open the properties dialog of the console window. -The options contain a toggle button, named "Quick edit mode". It must -be ON. Save the properties. - -Under Windows 9x, open the properties dialog of the console window. -Select the Misc tab. Uncheck Fast Pasting. Check QuickEdit. - -You can also bind the insert key to paste from the clipboard by adding -the following line to your .inputrc file: -@example - "\e[2~": paste-from-clipboard -@end example - - -@subsection What does "mount failed: Device or resource busy" mean? - -@strong{(Please note: This section has not yet been updated for the latest -net release.)} - -This usually means that you are trying to mount to a location -already in use by mount. For example, if c: is mounted as '/' -and you try to mount d: there as well, you will get this error -message. First "umount" the old location, then "mount" the new one and -you should have better luck. - -If you are trying to umount '/' and are getting this message, you may -need to run @code{regedit.exe} and change the "native" key for the '/' -mount in one of the mount points kept under -HKEY_CURRENT_USER/Software/Cygnus Solutions/CYGWIN.DLL setup/<version> -where <version> is the latest registry version associated with the -Cygwin library. - -@subsection How can I share files between Unix and Windows? - -During development, we have both Unix boxes running Samba and -NT/Windows 95/98 machines. We often build with cross-compilers -under Unix and copy binaries and source to the Windows system -or just toy with them directly off the Samba-mounted partition. -On dual-boot NT/Windows 9x machines, we usually use the FAT -filesystem so we can also access the files under Windows 9x. - -@subsection Are mixed-case filenames possible with Cygwin? - -Several Unix programs expect to be able to use to filenames -spelled the same way, but with different case. A prime example -of this is perl's configuration script, which wants @code{Makefile} and -@code{makefile}. WIN32 can't tell the difference between files with -just different case, so the configuration fails. - -In releases prior to beta 16, mount had a special mixed case option -which renamed files in such a way as to allow mixed case filenames. We -chose to remove the support when we rewrote the path handling code for -beta 16. The standard Windows apps -- explorer.exe, -cmd.exe/command.com, etc. -- do not distinguish filenames that differed -only in case, resulting in some (very) undesirable behavior. - -Sergey Okhapkin had maintained a mixed-case patch ('coolview') until -about B20.1, but this has not been updated to recent versions of Cygwin. - -@subsection What about DOS special filenames? - -Files cannot be named com1, lpt1, or aux (to name a few); either as -the root filename or as the extension part. If you do, you'll have -trouble. Unix programs don't avoid these names which can make things -interesting. E.g., the perl distribution has a file called -@code{aux.sh}. The perl configuration tries to make sure that -@code{aux.sh} is there, but an operation on a file with the magic -letters 'aux' in it will hang. - -@subsection When it hangs, how do I get it back? - -If something goes wrong and the tools hang on you for some reason (easy -to do if you try and read a file called aux.sh), first try hitting ^C to -return to bash or the cmd prompt. - -If you start up another shell, and applications don't run, it's a good -bet that the hung process is still running somewhere. Use the Task -Manager, pview, or a similar utility to kill the process. - -And, if all else fails, there's always the reset button/power switch. -This should never be necessary under Windows NT. - -@subsection Why the weird directory structure? - -Why do /lib and /usr/lib (and /bin, /usr/bin) point to the same thing? - -Why use mounts instead of symbolic links? - -Can I use a disk root (e.g., C:\) as Cygwin root? Why is this discouraged? - -After a new installation in the default location, your mount points will -look something like this: - -@example -Device Directory Type Flags -C:\cygwin\bin /usr/bin user binmode -C:\cygwin\lib /usr/lib user binmode -C:\cygwin / user binmode -@end example - -Note that /bin and /usr/bin point to the same location, as do /lib and -/usr/lib. This is intentional, and you should not undo these mounts -unless you @emph{really} know what you are doing. - -Various applications and packages may expect to be installed in /lib or -/usr/lib (similarly /bin or /usr/bin). Rather than distinguish between -them and try to keep track of them (possibly requiring the occasional -duplication or symbolic link), it was decided to maintain only one -actual directory, with equivalent ways to access it. - -Symbolic links had been considered for this purpose, but were dismissed -because they do not always work on Samba drives. Also, mounts are -faster to process because no disk access is required to resolve them. - -Note that non-cygwin applications will not observe Cygwin mounts (or -symlinks for that matter). For example, if you use WinZip to unpack the -tar distribution of a Cygwin package, it may not get installed to the -correct Cygwin path. @emph{So don't do this!} - -It is strongly recommended not to make the Cygwin root directory the -same as your drive's root directory, unless you know what you are doing -and are prepared to deal with the consequences. It is generally easier -to maintain the Cygwin hierarchy if it is isolated from, say, C:\. For -one thing, you avoid possible collisions with other (non-cygwin) -applications that may create (for example) \bin and \lib directories. -(Maybe you have nothing like that installed now, but who knows about -things you might add in the future?) - -@subsection How do anti-virus programs like Cygwin? - -Users have reported that NAI (formerly McAfee) VirusScan for NT (and -others?) is incompatible with Cygwin. This is because it tries to scan -the newly loaded shared memory in cygwin1.dll, which can cause fork() to -fail, wreaking havoc on many of the tools. (It is not confirmed that -this is still a problem, however.) - -There have been several reports of NAI VirusScan causing the system to -hang when unpacking tar.gz archives. This is surely a bug in VirusScan, -and should be reported to NAI. The only workaround is to disable -VirusScan when accessing these files. This can be an issue during -setup, and is discussed in that FAQ entry. - -Some users report a significant performance hit using Cygwin when their -anti-virus software is enabled. Rather than disable the anti-virus -software completely, it may be possible to specify directories whose -contents are exempt from scanning. In a default installation, this -would be @samp{@code{C:\cygwin\bin}}. Obviously, this could be -exploited by a hostile non-Cygwin program, so do this at your own risk. - -@subsection Why can't I run bash as a shell under NT Emacs? - -The Windows port of GNU Emacs (aka "NT emacs") uses the Windows command -shell by default. Also, since Emacs is not a Cygwin application, it has -no knowledge of Cygwin mounts. With those points in mind, you need to -add the following code to your ~/.emacs or ~/_emacs file in order to use -bash. This is particularly useful for the JDE package -(@file{http://sunsite.dk/jde/}). - -@example - ;; This assumes that Cygwin is installed in C:\cygwin (the - ;; default) and that C:\cygwin\bin is not already in your - ;; Windows Path (it generally should not be). - ;; - (setq exec-path (cons "C:/cygwin/bin" exec-path)) - (setenv "PATH" (concat "C:\\cygwin\\bin;" (getenv "PATH"))) - ;; - ;; NT-emacs assumes a Windows command shell, which you change - ;; here. - ;; - (setq process-coding-system-alist '(("bash" . undecided-unix))) - (setq w32-quote-process-args ?\") - (setq shell-file-name "bash") - (setenv "SHELL" shell-file-name) - (setq explicit-shell-file-name shell-file-name) - ;; - ;; This removes unsightly ^M characters that would otherwise - ;; appear in the output of java applications. - ;; - (add-hook 'comint-output-filter-functions - 'comint-strip-ctrl-m) -@end example - -@subsection info error "dir: No such file or directory" - -Cygwin packages install their info documentation in the /usr/info -directory. But you need to create a @code{dir} file there before the -standalone info program (probably @code{/usr/bin/info}) can be used to -read those info files. This is how you do it: -@example - bash$ cd /usr/info - bash$ for f in *.info ; do install-info $f dir ; done -@end example -This may generate warnings: -@example - install-info: warning: no info dir entry in `gzip.info' - install-info: warning: no info dir entry in `time.info' -@end example -The @code{install-info} command cannot parse these files, so you will -have to add their entries to @code{/usr/info/dir} by hand. - -@subsection Why do I get a message saying Out of Queue slots? - -@strong{(Please note: This section has not yet been updated for the latest -net release.)} - -"Out of queue slots!" generally occurs when you're trying to remove -many files that you do not have permission to remove (either because -you don't have permission, they are opened exclusively, etc). What -happens is Cygwin queues up these files with the supposition that it -will be possible to delete these files in the future. Assuming that -the permission of an affected file does change later on, the file will -be deleted as requested. However, if too many requests come in to -delete inaccessible files, the queue overflows and you get the message -you're asking about. Usually you can remedy this with a quick chmod, -close of a file, or other such thing. (Thanks to Larry Hall for -this explanation). - -@subsection Why don't symlinks work on samba-mounted filesystems? - -Symlinks are marked with "system" file attribute. Samba does not -enable this attribute by default. To enable it, consult your Samba -documentation and then add these lines to your samba configuration -file: - -@smallexample - map system = yes - create mask = 0775 -@end smallexample - -Note that the 0775 can be anything as long as the 0010 bit is set. - -@subsection Why does df report sizes incorrectly. - -@strong{(Please note: This section has not yet been updated for the latest -net release.)} - -There is a bug in the Win32 API function GetFreeDiskSpace that -makes it return incorrect values for disks larger than 2 GB in size. -Perhaps that may be your problem? - |