diff options
Diffstat (limited to 'winsup/utils/utils.sgml')
-rw-r--r-- | winsup/utils/utils.sgml | 1994 |
1 files changed, 0 insertions, 1994 deletions
diff --git a/winsup/utils/utils.sgml b/winsup/utils/utils.sgml deleted file mode 100644 index 77cb17b2e..000000000 --- a/winsup/utils/utils.sgml +++ /dev/null @@ -1,1994 +0,0 @@ -<sect1 id="using-utils"><title>Cygwin Utilities</title> - -<para>Cygwin comes with a number of command-line utilities that are -used to manage the UNIX emulation portion of the Cygwin environment. -While many of these reflect their UNIX counterparts, each was written -specifically for Cygwin. You may use the long or short option names -interchangeably; for example, <literal>--help</literal> and -<literal>-h</literal> function identically. All of the Cygwin -command-line utilities support the <literal>--help</literal> and -<literal>--version</literal> options. -</para> - -<sect2 id="cygcheck"><title>cygcheck</title> - -<screen> -Usage: cygcheck [-v] [-h] PROGRAM - cygcheck -c [-d] [PACKAGE] - cygcheck -s [-r] [-v] [-h] - cygcheck -k - cygcheck -f FILE [FILE]... - cygcheck -l [PACKAGE]... - cygcheck -p REGEXP - cygcheck --delete-orphaned-installation-keys - cygcheck --enable-unique-object-names Cygwin-DLL - cygcheck --disable-unique-object-names Cygwin-DLL - cygcheck --show-unique-object-names Cygwin-DLL - cygcheck -h -List system information, check installed packages, or query package database. - -At least one command option or a PROGRAM is required, as shown above. - - PROGRAM list library (DLL) dependencies of PROGRAM - -c, --check-setup show installed version of PACKAGE and verify integrity - (or for all installed packages if none specified) - -d, --dump-only just list packages, do not verify (with -c) - -s, --sysinfo produce diagnostic system information (implies -c -d) - -r, --registry also scan registry for Cygwin settings (with -s) - -k, --keycheck perform a keyboard check session (must be run from a - plain console only, not from a pty/rxvt/xterm) - -f, --find-package find the package to which FILE belongs - -l, --list-package list contents of PACKAGE (or all packages if none given) - -p, --package-query search for REGEXP in the entire cygwin.com package - repository (requires internet connectivity) - --delete-orphaned-installation-keys - Delete installation keys of old, now unused - installations from the registry. Requires the right - to change the registry. - --enable-unique-object-names Cygwin-DLL - --disable-unique-object-names Cygwin-DLL - --show-unique-object-names Cygwin-DLL - Enable, disable, or show the setting of the - \"unique object names\" setting in the Cygwin DLL - given as argument to this option. The DLL path must - be given as valid Windows(!) path. - See the users guide for more information. - If you don't know what this means, don't change it. - -v, --verbose produce more verbose output - -h, --help annotate output with explanatory comments when given - with another command, otherwise print this help - -V, --version print the version of cygcheck and exit - -Note: -c, -f, and -l only report on packages that are currently installed. To - search all official Cygwin packages use -p instead. The -p REGEXP matches - package names, descriptions, and names of files/paths within all packages. -</screen> - -<para> -The <command>cygcheck</command> program is a diagnostic utility for -dealing with Cygwin programs. If you are familiar with -<command>dpkg</command> or <command>rpm</command>, -<command>cygcheck</command> is similar in many ways. (The major difference -is that <command>setup.exe</command> handles installing and uninstalling -packages; see <xref linkend="internet-setup"></xref> for more information.) -</para> -<para> -The <literal>-c</literal> option checks the version and status of -installed Cygwin packages. If you specify one or more package names, -<command>cygcheck</command> will limit its output to those packages, -or with no arguments it lists all packages. A package will be marked -<literal>Incomplete</literal> if files originally installed are no longer -present. The best thing to do in that situation is reinstall the package -with <command>setup.exe</command>. To see which files are missing, use the -<literal>-v</literal> option. If you do not need to know the status -of each package and want <command>cygcheck</command> to run faster, add the -<literal>-d</literal> option and <command>cygcheck</command> will only -output the name and version for each package. -</para> -<para> -If you list one or more programs on the command line, -<command>cygcheck</command> will diagnose the runtime environment of that -program or programs, providing the names of DLL files on which the program -depends. If you specify the <literal>-s</literal> option, -<command>cygcheck</command> will give general system information. If you -list one or more programs on the command line and specify -<literal>-s</literal>, <command>cygcheck</command> will report on -both.</para> -<para> -The <literal>-f</literal> option helps you to track down which package a -file came from, and <literal>-l</literal> lists all files in a package. -For example, to find out about <filename>/usr/bin/less</filename> and its -package: -<example id="utils-cygcheck-ex"><title>Example <command>cygcheck</command> usage</title> -<screen> -$ cygcheck -f /usr/bin/less -less-381-1 - -$ cygcheck -l less -/usr/bin/less.exe -/usr/bin/lessecho.exe -/usr/bin/lesskey.exe -/usr/man/man1/less.1 -/usr/man/man1/lesskey.1 -</screen> -</example> -</para> - -<para>The <literal>-h</literal> option prints additional helpful -messages in the report, at the beginning of each section. It also -adds table column headings. While this is useful information, it also -adds some to the size of the report, so if you want a compact report -or if you know what everything is already, just leave this out.</para> - -<para>The <literal>-v</literal> option causes the output to be more -verbose. What this means is that additional information will be -reported which is usually not interesting, such as the internal -version numbers of DLLs, additional information about recursive DLL -usage, and if a file in one directory in the PATH also occurs in other -directories on the PATH. </para> - -<para>The <literal>-r</literal> option causes -<command>cygcheck</command> to search your registry for information -that is relevent to Cygwin programs. These registry entries are the -ones that have "Cygwin" in the name. If you are paranoid about -privacy, you may remove information from this report, but please keep -in mind that doing so makes it harder to diagnose your problems.</para> - -<para>In contrast to the other options that search the packages that are -installed on your local system, the <literal>-p</literal> option can be used -to search the entire official Cygwin package repository. It takes as argument -a Perl-compatible regular expression which is used to match package names, -package descriptions, and path/filenames of the contents of packages. This -feature requires an active internet connection, since it must query the -<literal>cygwin.com</literal> web site. In fact, it is equalivant to the -search that is available on the <ulink url="http://cygwin.com/packages/">Cygwin -package listing</ulink> page.</para> - -<para>For example, perhaps you are getting an error because you are missing a -certain DLL and you want to know which package includes that file: -<example id="utils-search-ex"><title>Searching all packages for a file</title> -<screen> -$ cygcheck -p 'cygintl-2\.dll' -Found 1 matches for 'cygintl-2\.dll'. - -libintl2-0.12.1-3 GNU Internationalization runtime library - -$ cygcheck -p 'libexpat.*\.a' -Found 2 matches for 'libexpat.*\.a'. - -expat-1.95.7-1 XML parser library written in C -expat-1.95.8-1 XML parser library written in C - -$ cygcheck -p '/ls\.exe' -Found 2 matches for '/ls\.exe'. - -coreutils-5.2.1-5 GNU core utilities (includes fileutils, sh-utils and textutils) -coreutils-5.3.0-6 GNU core utilities (includes fileutils, sh-utils and textutils) -</screen> -</example> -</para> - -<para>Note that this option takes a regular expression, not a glob or wildcard. -This means that you need to use <literal>.*</literal> if you want something -similar to the wildcard <literal>*</literal> commonly used in filename globbing. -Similarly, to match the period character you should use <literal>\.</literal> -since the <literal>.</literal> character in a regexp is a metacharacter that -will match any character. Also be aware that the characters such as -<literal>\</literal> and <literal>*</literal> are shell metacharacters, so -they must be either escaped or quoted, as in the example above.</para> - -<para>The third example above illustrates that if you want to match a whole -filename, you should include the <literal>/</literal> path seperator. In the -given example this ensures that filenames that happen to end in -<literal>ls.exe</literal> such as <literal>ncftpls.exe</literal> are not shown. -Note that this use does not mean "look for packages with <literal>ls</literal> -in the root directory," since the <literal>/</literal> can match anywhere in the -path. It's just there to anchor the match so that it matches a full -filename.</para> - -<para>By default the matching is case-sensitive. To get a case insensitive -match, begin your regexp with <literal>(?i)</literal> which is a PCRE-specific -feature. For complete documentation on Perl-compatible regular expression -syntax and options, read the <command>perlre</command> manpage, or one of many -websites such as <literal>perldoc.com</literal> that document the Perl -language.</para> - -<para>The <command>cygcheck</command> program should be used to send -information about your system for troubleshooting when requested. -When asked to run this command save the output so that you can email it, -for example:</para> - -<screen> -<prompt>$</prompt> <userinput>cygcheck -s -v -r -h > cygcheck_output.txt</userinput> -</screen> - -<para> -Each Cygwin DLL stores its path and installation key in the registry. -This allows troubleshooting of problems which could be a result of having -multiple concurrent Cygwin installations. However, if you're experimenting -a lot with different Cygwin installation paths, your registry could -accumulate a lot of old Cygwin installation entries for which the -installation doesn't exist anymore. To get rid of these orphaned registry -entries, use the <command>cygcheck --delete-orphaned-installation-keys</command> -command.</para> - -<para> -Each Cygwin DLL generates a key value from its installation path. This -value is not only stored in the registry, it's also used to generate -global object names used for interprocess communication. This keeps -different Cygwin installations separate. Processes running under a -Cygwin DLL installed in C:\cygwin don't see processes running under a -Cygwin DLL installed in C:\Program Files\cygwin. This allows -running multiple versions of Cygwin DLLs without these versions to -interfere with each other, or to run small third-party installations -for a specific purpose independently from a Cygwin net distribution. -</para> - -<para> -For debugging purposes it could be desired that the various Cygwin DLLs -use the same key, independently from their installation paths. If the -DLLs have different versions, trying to run processes under these DLLs -concurrently will result in error messages like this one:</para> - -<screen> -*** shared version mismatch detected - 0x8A88009C/0x75BE0074. -This problem is probably due to using incompatible versions of the cygwin DLL. -Search for cygwin1.dll using the Windows Start->Find/Search facility -and delete all but the most recent version. The most recent version *should* -reside in x:\\cygwin\\bin, where 'x' is the drive on which you have -installed the cygwin distribution. Rebooting is also suggested if you -are unable to find another cygwin DLL. -</screen> - -<para> -To disable the usage of a unique key value of a certain Cygwin DLL, use -the <command>cygcheck --disable-unique-object-names Cygwin-DLL</command> -command. <literal>Cygwin-DLL</literal> is the Windows path (*not* a -Cygwin POSIX path) to the DLL for which you want to disable this feature. -Note that you have to stop all Cygwin processes running under this DLL, -before you're allowed to change this setting. For instance, run -<command>cygcheck</command> from a DOS command line for this purpose.</para> - -<para>To re-enable the usage of a unique key, use the -<command>cygcheck --enable-unique-object-names Cygwin-DLL</command> command. -This option has the same characteristics as the -<literal>--disable-unique-object-names</literal> option</para> - -<para>Finally, you can use -<command>cygcheck --show-unique-object-names Cygwin-DLL</command> to find out -if the given Cygwin DLL use unique object names or not. In contrast to the -<literal>--disable-...</literal> and <literal>--enable-...</literal> options, -the <literal>--show-unique-object-names</literal> option also works for -Cygwin DLLs which are currently in use.</para> - -</sect2> - -<sect2 id="cygpath"><title>cygpath</title> - -<screen> -Usage: cygpath (-d|-m|-u|-w|-t TYPE) [-f FILE] [OPTION]... NAME... - cygpath [-c HANDLE] - cygpath [-ADHOPSW] - cygpath [-F ID] -Convert Unix and Windows format paths, or output system path information - -Output type options: - -d, --dos print DOS (short) form of NAMEs (C:\PROGRA~1\) - -m, --mixed like --windows, but with regular slashes (C:/WINNT) - -M, --mode report on mode of file (currently binmode or textmode) - -u, --unix (default) print Unix form of NAMEs (/cygdrive/c/winnt) - -w, --windows print Windows form of NAMEs (C:\WINNT) - -t, --type TYPE print TYPE form: 'dos', 'mixed', 'unix', or 'windows' -Path conversion options: - -a, --absolute output absolute path - -l, --long-name print Windows long form of NAMEs (with -w, -m only) - -p, --path NAME is a PATH list (i.e., '/bin:/usr/bin') - -s, --short-name print DOS (short) form of NAMEs (with -w, -m only) - -C, --codepage CP print DOS, Windows, or mixed pathname in Windows - codepage CP. CP can be a numeric codepage identifier, - or one of the reserved words ANSI, OEM, or UTF8. - If this option is missing, cygpath defaults to the - character set defined by the current locale. -System information: - -A, --allusers use `All Users' instead of current user for -D, -P - -D, --desktop output `Desktop' directory and exit - -H, --homeroot output `Profiles' directory (home root) and exit - -O, --mydocs output `My Documents' directory and exit - -P, --smprograms output Start Menu `Programs' directory and exit - -S, --sysdir output system directory and exit - -W, --windir output `Windows' directory and exit - -F, --folder ID output special folder with numeric ID and exit -Other options: - -f, --file FILE read FILE for input; use - to read from STDIN - -o, --option read options from FILE as well (for use with --file) - -c, --close HANDLE close HANDLE (for use in captured process) - -i, --ignore ignore missing argument - -h, --help output usage information and exit - -v, --version output version information and exit -</screen> - -<para>The <command>cygpath</command> program is a utility that -converts Windows native filenames to Cygwin POSIX-style pathnames and -vice versa. It can be used when a Cygwin program needs to pass a file -name to a native Windows program, or expects to get a file name from a -native Windows program. Alternatively, <command>cygpath</command> can -output information about the location of important system directories -in either format. -</para> - -<para>The <literal>-u</literal> and <literal>-w</literal> options -indicate whether you want a conversion to UNIX (POSIX) format -(<literal>-u</literal>) or to Windows format (<literal>-w</literal>). -Use the <literal>-d</literal> to get DOS-style (8.3) file and path names. -The <literal>-m</literal> option will output Windows-style format -but with forward slashes instead of backslashes. This option is -especially useful in shell scripts, which use backslashes as an escape -character.</para> - -<para> In combination with the <literal>-w</literal> option, you can use -the <literal>-l</literal> and <literal>-s</literal> options to use normal -(long) or DOS-style (short) form. The <literal>-d</literal> option is -identical to <literal>-w</literal> and <literal>-s</literal> together. -</para> - -<para>The <literal>-C</literal> option allows to specify a Windows codepage -to print DOS and Windows paths created with one of the <literal>-d</literal>, -<literal>-m</literal>, or <literal>-w</literal> options. The default is to -use the character set of the current locale defined by one of the -internationalization environment variables <envar>LC_ALL</envar>, -<envar>LC_CTYPE</envar>, or <envar>LANG</envar>, see -<xref linkend="setup-locale"></xref>. This is sometimes not sufficent for -interaction with native Windows tools, which might expect native, non-ASCII -characters in a specific Windows codepage. Console tools, for instance, might -expect pathnames in the current OEM codepage, while graphical tools like -Windows Explorer might expect pathnames in the current ANSI codepage.</para> - -<para>The <literal>-C</literal> option takes a single parameter:</para> -<itemizedlist spacing="compact"> -<listitem><para><literal>ANSI</literal>, to specify the current ANSI codepage</para></listitem> -<listitem><para><literal>OEM</literal>, to specify the current OEM (console) codepage</para></listitem> -<listitem><para><literal>UTF8</literal>, to specify UTF-8.</para></listitem> -<listitem><para>A numerical, decimal codepage number, for instance 936 for GBK, -28593 for ISO-8859-3, etc. A full list of supported codepages is listed on the -Microsoft MSDN page -<ulink url="http://msdn.microsoft.com/en-us/library/dd317756(VS.85).aspx">Code Page Identifiers</ulink>. A codepage of 0 is the same as if the -<literal>-C</literal> hasn't been specified at all.</para></listitem> -</itemizedlist> - -<para>The <literal>-p</literal> option means that you want to convert -a path-style string rather than a single filename. For example, the -PATH environment variable is semicolon-delimited in Windows, but -colon-delimited in UNIX. By giving <literal>-p</literal> you are -instructing <command>cygpath</command> to convert between these -formats.</para> - -<para>The <literal>-i</literal> option supresses the print out of the -usage message if no filename argument was given. It can be used in -make file rules converting variables that may be omitted -to a proper format. Note that <command>cygpath</command> output may -contain spaces (C:\Program Files) so should be enclosed in quotes. -</para> - - -<example id="utils-cygpath-ex"><title>Example <command>cygpath</command> usage</title> -<screen> -<![CDATA[ -#!/bin/sh -if [ "${1}" = "" ]; - then - XPATH="."; - else - XPATH="$(cygpath -C ANSI -w "${1}")"; -fi -explorer $XPATH & -]]> -</screen> -</example> - -<para>The capital options -<literal>-D</literal>, <literal>-H</literal>, <literal>-P</literal>, -<literal>-S</literal>, and <literal>-W</literal> output directories used -by Windows that are not the same on all systems, for example -<literal>-S</literal> might output C:\WINNT\system32 or C:\Windows\System32. -The <literal>-H</literal> shows the Windows profiles directory that can -be used as root of home. The <literal>-A</literal> option forces use of -the "All Users" directories instead of the current user for the -<literal>-D</literal>, <literal>-O</literal> and <literal>-P</literal> -options. -The <literal>-F</literal> outputs other special folders specified by -their internal numeric code (decimal or 0xhex). For valid codes and -symbolic names, see the CSIDL_* definitions in the include file -/usr/include/w32api/shlobj.h from package w32api. The current valid -range of codes for folders is 0 (Desktop) to 59 (CDBurn area). -By default the output is in UNIX (POSIX) format; -use the <literal>-w</literal> or <literal>-d</literal> options to get -other formats.</para> - -</sect2> - -<sect2 id="dumper"><title>dumper</title> - -<screen> -Usage: dumper [OPTION] FILENAME WIN32PID -Dump core from WIN32PID to FILENAME.core - --d, --verbose be verbose while dumping --h, --help output help information and exit --q, --quiet be quiet while dumping (default) --v, --version output version information and exit -</screen> - -<para>The <command>dumper</command> utility can be used to create a -core dump of running Windows process. This core dump can be later loaded -to <command>gdb</command> and analyzed. One common way to use -<command>dumper</command> is to plug it into cygwin's Just-In-Time -debugging facility by adding - -<screen> -error_start=x:\path\to\dumper.exe -</screen> - -to the <emphasis>CYGWIN</emphasis> environment variable. Please note that -<literal>x:\path\to\dumper.exe</literal> is Windows-style and not cygwin -path. If <literal>error_start</literal> is set this way, then dumper will -be started whenever some program encounters a fatal error. -</para> - -<para> -<command>dumper</command> can be also be started from the command line to -create a core dump of any running process. Unfortunately, because of a Windows -API limitation, when a core dump is created and <command>dumper</command> -exits, the target process is terminated too. -</para> - -<para> -To save space in the core dump, <command>dumper</command> doesn't write those -portions of target process' memory space that are loaded from executable and -dll files and are unchangeable, such as program code and debug info. Instead, -<command>dumper</command> saves paths to files which contain that data. When a -core dump is loaded into gdb, it uses these paths to load appropriate files. -That means that if you create a core dump on one machine and try to debug it on -another, you'll need to place identical copies of the executable and dlls in -the same directories as on the machine where the core dump was created. -</para> - -</sect2> - -<sect2 id="getfacl"><title>getfacl</title> - -<screen> -Usage: getfacl [-adn] FILE [FILE2...] -Display file and directory access control lists (ACLs). - - -a, --all display the filename, the owner, the group, and - the ACL of the file - -d, --dir display the filename, the owner, the group, and - the default ACL of the directory, if it exists - -h, --help output usage information and exit - -n, --noname display user and group IDs instead of names - -v, --version output version information and exit - -When multiple files are specified on the command line, a blank -line separates the ACLs for each file. -</screen> - -<para> -For each argument that is a regular file, special file or -directory, <command>getfacl</command> displays the owner, the group, and the -ACL. For directories <command>getfacl</command> displays additionally the -default ACL. With no options specified, <command>getfacl</command> displays -the filename, the owner, the group, and both the ACL and the default ACL, if -it exists. For more information on Cygwin and Windows ACLs, see -<xref linkend="ntsec"></xref> in the Cygwin User's Guide. -The format for ACL output is as follows: -<screen> - # file: filename - # owner: name or uid - # group: name or uid - user::perm - user:name or uid:perm - group::perm - group:name or gid:perm - mask:perm - other:perm - default:user::perm - default:user:name or uid:perm - default:group::perm - default:group:name or gid:perm - default:mask:perm - default:other:perm -</screen> -</para> -</sect2> - -<sect2 id="kill"><title>kill</title> - -<screen> -Usage: kill [-f] [-signal] [-s signal] pid1 [pid2 ...] - kill -l [signal] -Send signals to processes - - -f, --force force, using win32 interface if necessary - -l, --list print a list of signal names - -s, --signal send signal (use kill --list for a list) - -h, --help output usage information and exit - -v, --version output version information and exit -</screen> - -<para>The <command>kill</command> program allows you to send arbitrary -signals to other Cygwin programs. The usual purpose is to end a -running program from some other window when ^C won't work, but you can -also send program-specified signals such as SIGUSR1 to trigger actions -within the program, like enabling debugging or re-opening log files. -Each program defines the signals they understand.</para> - -<para>You may need to specify the full path to use <command>kill</command> -from within some shells, including <command>bash</command>, the default Cygwin -shell. This is because <command>bash</command> defines a -<command>kill</command> builtin function; see the <command>bash</command> -man page under <emphasis>BUILTIN COMMANDS</emphasis> for more information. -To make sure you are using the Cygwin version, try - -<screen> -$ /bin/kill --version -</screen> - -which should give the Cygwin <command>kill</command> version number and -copyright information. -</para> - -<para>Unless you specific the <literal>-f</literal> option, the "pid" values -used by <command>kill</command> are the Cygwin pids, not the Windows pids. -To get a list of running programs and their Cygwin pids, use the Cygwin -<command>ps</command> program. <command>ps -W</command> will display -<emphasis>all</emphasis> windows pids.</para> - -<para>The <command>kill -l</command> option prints the name of the -given signal, or a list of all signal names if no signal is given.</para> - -<para>To send a specific signal, use the <literal>-signN</literal> -option, either with a signal number or a signal name (minus the "SIG" -part), as shown in these examples:</para> - -<example id="utils-kill-ex"><title>Using the kill command</title> -<screen> -<prompt>$</prompt> <userinput>kill 123</userinput> -<prompt>$</prompt> <userinput>kill -1 123</userinput> -<prompt>$</prompt> <userinput>kill -HUP 123</userinput> -<prompt>$</prompt> <userinput>kill -f 123</userinput> -</screen> -</example> - -<para>Here is a list of available signals, their numbers, and some -commentary on them, from the file -<literal><sys/signal.h></literal>, which should be considered -the official source of this information.</para> - -<screen> -SIGHUP 1 hangup -SIGINT 2 interrupt -SIGQUIT 3 quit -SIGILL 4 illegal instruction (not reset when caught) -SIGTRAP 5 trace trap (not reset when caught) -SIGABRT 6 used by abort -SIGEMT 7 EMT instruction -SIGFPE 8 floating point exception -SIGKILL 9 kill (cannot be caught or ignored) -SIGBUS 10 bus error -SIGSEGV 11 segmentation violation -SIGSYS 12 bad argument to system call -SIGPIPE 13 write on a pipe with no one to read it -SIGALRM 14 alarm clock -SIGTERM 15 software termination signal from kill -SIGURG 16 urgent condition on IO channel -SIGSTOP 17 sendable stop signal not from tty -SIGTSTP 18 stop signal from tty -SIGCONT 19 continue a stopped process -SIGCHLD 20 to parent on child stop or exit -SIGCLD 20 System V name for SIGCHLD -SIGTTIN 21 to readers pgrp upon background tty read -SIGTTOU 22 like TTIN for output if (tp->t_local&LTOSTOP) -SIGIO 23 input/output possible -SIGPOLL 23 System V name for SIGIO -SIGXCPU 24 exceeded CPU time limit -SIGXFSZ 25 exceeded file size limit -SIGVTALRM 26 virtual time alarm -SIGPROF 27 profiling time alarm -SIGWINCH 28 window changed -SIGLOST 29 resource lost (eg, record-lock lost) -SIGPWR 29 power failure -SIGUSR1 30 user defined signal 1 -SIGUSR2 31 user defined signal 2 -</screen> - -</sect2> - -<sect2 id="locale"><title>locale</title> - -<screen> -Usage: locale [-amsuUvh] - or: locale [-ck] NAME -Get locale-specific information. - -Options: - - -a, --all-locales List all available supported locales - -c, --category-name List information about given category NAME - -k, --keyword-name Print information about given keyword NAME - -m, --charmaps List all available character maps - -s, --system Print system default locale - -u, --user Print user's default locale - -U, --utf Attach ".UTF-8" to the result - -v, --verbose More verbose output - -h, --help This text -</screen> - -<para><command>locale</command> without parameters prints information about -the current locale environment settings.</para> - -<para>The <literal>-u</literal> option prints the current user's Windows -default locale to stdout. The <literal>-s</literal> option prints the -systems default locale instead. With the <literal>-U</literal> option -<command>locale</command> appends a ".UTF-8". This can be used in scripts -to set the Cygwin locale to the Windows user or system default, for instance: -</para> - -<screen> -bash$ export LANG=$(locale -uU) -bash$ echo $LANG -en_US.UTF-8 -</screen> - -<para>The <literal>-a</literal> option is helpful to learn which locales -are supported by your Windows machine. It prints all available locales -and the allowed modifiers. Example:</para> - -<screen> -bash$ locale -a -C -C.utf8 -POSIX -af_ZA -af_ZA.utf8 -am_ET -am_ET.utf8 -... -be_BY -be_BY.utf8 -be_BY@latin -... -ca_ES -ca_ES.utf8 -ca_ES@euro -catalan -... -</screen> - -<para>The <literal>-v</literal> option prints more detailed information about -each available locale. Example:</para> - -<screen> -bash$ locale -av -locale: af_ZA archive: /cygdrive/c/Windows/system32/kernel32.dll -------------------------------------------------------------------------------- - language | Afrikaans -territory | South Africa - codeset | ISO-8859-1 - -locale: af_ZA.utf8 archive: /cygdrive/c/Windows/system32/kernel32.dll -------------------------------------------------------------------------------- - language | Afrikaans -territory | South Africa - codeset | UTF-8 - -... - -locale: ca_ES@euro archive: /cygdrive/c/Windows/system32/kernel32.dll -------------------------------------------------------------------------------- - language | Catalan -territory | Spain - codeset | ISO-8859-15 - -locale: catalan archive: /usr/share/locale/locale.alias -------------------------------------------------------------------------------- - language | Catalan -territory | Spain - codeset | ISO-8859-1 - -... -</screen> - -<para>The <literal>-m</literal> option prints the names of the available -charmaps supported by Cygwin to stdout.</para> - -<para>Otherwise, if arguments are given, <command>locale</command> prints -the values assigned to these arguments. Arguments can be names of locale -categories (for instance: LC_CTYPE, LC_MONETARY), or names of keywords -supported in the locale categories (for instance: thousands_sep, charmap). -The <literal>-c</literal> option prints additionally the name of the category. -The <literal>-k</literal> option prints additionally the name of the keyword. -Example:</para> - -<screen> -bash$ locale -ck LC_MESSAGES -LC_MESSAGES -yesexpr="^[yY]" -noexpr="^[nN]" -yesstr="yes" -nostr="no" -messages-codeset="UTF-8" -bash$ locale noexpr -^[nN] -</screen> - -</sect2> - -<sect2 id="mkgroup"><title>mkgroup</title> - -<screen> -Usage: mkgroup [OPTION]... -Print /etc/group file to stdout - -Options: - -l,--local [machine[,offset]] - print local groups with gid offset offset - (from local machine if no machine specified) - -L,--Local [machine[,offset]] - ditto, but generate groupname with machine prefix - -d,--domain [domain[,offset]] - print domain groups with gid offset offset - (from current domain if no domain specified) - -D,--Domain [domain[,offset]] - ditto, but generate groupname with machine prefix - -c,--current print current group - -C,--Current ditto, but generate groupname with machine or - domain prefix - -S,--separator char for -L, -D, -C use character char as domain\group - separator in groupname instead of the default '\' - -o,--id-offset offset change the default offset (10000) added to gids - in domain or foreign server accounts. - -g,--group groupname only return information for the specified group - one of -l, -L, -d, -D must be specified, too - -b,--no-builtin don't print BUILTIN groups - -U,--unix grouplist additionally print UNIX groups when using -l or -L - on a UNIX Samba server - grouplist is a comma-separated list of groupnames - or gid ranges (root,-25,50-100). - (enumerating large ranges can take a long time!) - -s,--no-sids (ignored) - -u,--users (ignored) - -h,--help print this message - -v,--version print version information and exit - -Default is to print local groups on stand-alone machines, plus domain -groups on domain controllers and domain member machines. -</screen> - -<para>The <command>mkgroup</command> program can be used to help -configure Cygwin by creating a <filename>/etc/group</filename> -file. Its use is essential to include Windows security information.</para> - -<para>The command is initially called by <command>setup.exe</command> to -create a default <filename>/etc/group</filename>. This should be -sufficient in most circumstances. However, especially when working -in a multi-domain environment, you can use <command>mkgroup</command> -manually to create a more complete <filename>/etc/group</filename> file for -all domains. Especially when you have the same group name used on -multiple machines or in multiple domains, you can use the <literal>-D</literal>, -<literal>-L</literal> and <literal>-C</literal> options to create unique -domain\group style groupnames.</para> - -<para>Note that this information is static. If you change the group -information in your system, you'll need to regenerate the group file -for it to have the new information.</para> - -<para>The <literal>-d/-D</literal> and <literal>-l/-L</literal> options -allow you to specify where the information comes from, the -local SAM of a machine or from the domain, or both. -With the <literal>-d/-D</literal> options the program contacts a Domain -Controller, which my be unreachable or have restricted access. -Comma-separated from the machine or domain, you can specify an offset -which is used as base added to the group's RID to compute the gid -(offset + RID = gid). This allows you to create the same gids every time you -re-run <command>mkgroup</command>. -For very simple needs, an entry for the current user's group can be -created by using the option <literal>-c</literal> or <literal>-C</literal>. -If you want to use one of the <literal>-D</literal>, <literal>-L</literal> -or <literal>-C</literal> options, but you don't like the backslash as -domain/group separator, you can specify another separator using the -<literal>-S</literal> option, for instance:</para> - -<example id="utils-mkgroup-ex"><title>Setting up group entry for current user with different domain/group separator</title> -<screen> -<prompt>$</prompt> <userinput>mkgroup -C -S+ > /etc/group</userinput> -<prompt>$</prompt> <userinput>cat /etc/group</userinput> -DOMAIN+my_group:S-1-5-21-2913048732-1697188782-3448811101-1144:11144: -</screen> -</example> - -<para>The <literal>-o</literal> option allows for special cases -(such as multiple domains) where the GIDs might match otherwise. -The <literal>-g</literal> option only prints the information for one group. -The <literal>-U</literal> option allows you to enumerate the standard UNIX -groups on a Samba machine. It's used together with -<literal>-l samba-server</literal> or <literal>-L samba-server</literal>. -The normal UNIX groups are usually not enumerated, but they can show -up as a group in <command>ls -l</command> output. -</para> - -</sect2> - -<sect2 id="mkpasswd"><title>mkpasswd</title> - -<screen> -Usage: mkpasswd [OPTIONS]... -Print /etc/passwd file to stdout - -Options: - -l,--local [machine[,offset]] - print local user accounts with uid offset offset - (from local machine if no machine specified) - -L,--Local [machine[,offset]] - ditto, but generate username with machine prefix - -d,--domain [domain[,offset]] - print domain accounts with uid offset offset - (from current domain if no domain specified) - -D,--Domain [domain[,offset]] - ditto, but generate username with domain prefix - -c,--current print current user - -C,--Current ditto, but generate username with machine or - domain prefix - -S,--separator char for -L, -D, -C use character char as domain\user - separator in username instead of the default '\' - -o,--id-offset offset change the default offset (10000) added to uids - in domain or foreign server accounts. - -u,--username username only return information for the specified user - one of -l, -L, -d, -D must be specified, too - -p,--path-to-home path use specified path instead of user account home dir - or /home prefix - -m,--no-mount don't use mount points for home dir - -U,--unix userlist additionally print UNIX users when using -l or -L\ - on a UNIX Samba server - userlist is a comma-separated list of usernames - or uid ranges (root,-25,50-100). - (enumerating large ranges can take a long time!) - -s,--no-sids (ignored) - -g,--local-groups (ignored) - -h,--help displays this message - -v,--version version information and exit - -Default is to print local accounts on stand-alone machines, domain accounts -on domain controllers and domain member machines. -</screen> - -<para>The <command>mkpasswd</command> program can be used to help -configure Cygwin by creating a <filename>/etc/passwd</filename> from -your system information. -Its use is essential to include Windows security information. However, -the actual passwords are determined by Windows, not by the content of -<filename>/etc/passwd</filename>.</para> - -<para>The command is initially called by <command>setup.exe</command> to -create a default <filename>/etc/passwd</filename>. This should be -sufficient in most circumstances. However, especially when working -in a multi-domain environment, you can use <command>mkpasswd</command> -manually to create a more complete <filename>/etc/passwd</filename> file for -all domains. Especially when you have the same user name used on -multiple machines or in multiple domains, you can use the <literal>-D</literal>, -<literal>-L</literal> and <literal>-C</literal> options to create unique -domain\user style usernames.</para> - -<para>Note that this information is static. If you change the user -information in your system, you'll need to regenerate the passwd file -for it to have the new information.</para> - -<para>The <literal>-d/-D</literal> and <literal>-l/-L</literal> options -allow you to specify where the information comes from, the -local machine or the domain (default or given), or both. -With the <literal>-d/-D</literal> options the program contacts the Domain -Controller, which may be unreachable or have restricted access. -Comma-separated from the machine or domain, you can specify an offset -which is used as base added to the user's RID to compute the uid -(offset + RID = uid). This allows to create the same uids every time you -re-run <command>mkpasswd</command>. -An entry for the current user can be created by using the -option <literal>-c</literal> or <literal>-C</literal>. -If you want to use one of the <literal>-D</literal>, <literal>-L</literal> -or <literal>-C</literal> options, but you don't like the backslash as -domain/group separator, you can specify another separator using the -<literal>-S</literal> option, similar to the <command>mkgroup</command>. -The <literal>-o</literal> option allows for special cases -(such as multiple domains) where the UIDs might match otherwise. -The <literal>-m</literal> option bypasses the current -mount table so that, for example, two users who have a Windows home -directory of H: could mount them differently. For more information on -SIDs, see <xref linkend="ntsec"></xref> in the Cygwin User's Guide. The -<literal>-p</literal> option causes <command>mkpasswd</command> to -use the specified prefix instead of the account home dir or <literal>/home/ -</literal>. For example, this command: - -<example id="utils-althome-ex"><title>Using an alternate home root</title> -<screen> -<prompt>$</prompt> <userinput>mkpasswd -l -p "$(cygpath -H)" > /etc/passwd</userinput> -</screen> -</example> - -would put local users' home directories in the Windows 'Profiles' directory. -The <literal>-u</literal> option creates just an entry for -the specified user. -The <literal>-U</literal> option allows you to enumerate the standard UNIX -users on a Samba machine. It's used together with -<literal>-l samba-server</literal> or <literal>-L samba-server</literal>. -The normal UNIX users are usually not enumerated, but they can show -up as file owners in <command>ls -l</command> output. -</para> - -</sect2> - -<sect2 id="mount"><title>mount</title> - -<screen> -Usage: mount [OPTION] [<win32path> <posixpath>] - mount -a - mount <posixpath> -Display information about mounted filesystems, or mount a filesystem - - -a, --all mount all filesystems mentioned in fstab - -c, --change-cygdrive-prefix change the cygdrive path prefix to <posixpath> - -f, --force force mount, don't warn about missing mount - point directories - -h, --help output usage information and exit - -m, --mount-entries write fstab entries to replicate mount points - and cygdrive prefixes - -o, --options X[,X...] specify mount options - -p, --show-cygdrive-prefix show user and/or system cygdrive path prefix - -v, --version output version information and exit -</screen> - -<para>The <command>mount</command> program is used to map your drives -and shares onto Cygwin's simulated POSIX directory tree, much like as is -done by mount commands on typical UNIX systems. However, in contrast to -mount points given in <filename>/etc/fstab</filename>, mount points -created or changed with <command>mount</command> are not persistent. They -disappear immediately after the last process of the current user exited. -Please see <xref linkend="mount-table"></xref> for more information on the -concepts behind the Cygwin POSIX file system and strategies for using -mounts. To remove mounts temporarily, use <command>umount</command></para> - -<sect3 id="utils-mount"><title>Using mount</title> - -<para>If you just type <command>mount</command> with no parameters, it -will display the current mount table for you.</para> - -<example id="utils-mount-ex"> -<title>Displaying the current set of mount points</title> -<screen> -<prompt>$</prompt> <userinput>mount</userinput> -C:/cygwin/bin on /usr/bin type ntfs (binary) -C:/cygwin/lib on /usr/lib type ntfs (binary) -C:/cygwin on / type ntfs (binary) -C: on /mnt/c type ntfs (binary,user,noumount) -D: on /mnt/d type fat (binary,user,noumount) -</screen> -</example> - -<para>In this example, c:/cygwin is the POSIX root and the D drive is -mapped to <filename>/mnt/d</filename>. Note that in this case, the root -mount is a system-wide mount point that is visible to all users running -Cygwin programs, whereas the <filename>/mnt/d</filename> mount is only -visible to the current user.</para> - -<para>The <command>mount</command> utility is also the mechanism for -adding new mounts to the mount table in memory. The following example -demonstrates how to mount the directory -<filename>//pollux/home/joe/data</filename> to <filename>/data</filename> -for the duration of the current session. -</para> - -<example id="utils-mount-add-ex"> -<title>Adding mount points</title> -<screen> -<prompt>$</prompt> <userinput>ls /data</userinput> -ls: /data: No such file or directory -<prompt>$</prompt> <userinput>mount //pollux/home/joe/data /data</userinput> -mount: warning - /data does not exist! -<prompt>$</prompt> <userinput>mount</userinput> -//pollux/home/joe/data on /data type smbfs (binary) -C:/cygwin/bin on /usr/bin type ntfs (binary) -C:/cygwin/lib on /usr/lib type ntfs (binary) -C:/cygwin on / type ntfs (binary) -C: on /c type ntfs (binary,user,noumount) -D: on /d type fat (binary,user,noumount) -</screen> -</example> - -<para>A given POSIX path may only exist once in the mount table. Attempts to -replace the mount will fail with a busy error. The <literal>-f</literal> -(force) option causes the old mount to be silently replaced with the new one, -provided the old mount point was a user mount point. It's not valid to -replace system-wide mount points. Additionally, the <literal>-f</literal> -option will silence warnings about the non-existence of directories at the -Win32 path location.</para> - -<para> -The <literal>-o</literal> option is the method via which various options about -the mount point may be recorded. The following options are available (note that -most of the options are duplicates of other mount flags):</para> - -<screen> - acl - Use the filesystem's access control lists (ACLs) to - implement real POSIX permissions (default). - binary - Files default to binary mode (default). - bind - Allows to remount part of the file hierarchy somewhere else. - Different from other mount calls, the first argument - specifies an absolute POSIX path, rather than a Win32 path. - This POSIX path is remounted to the POSIX path specified as - the second parameter. The conversion to a Win32 path is done - within Cygwin immediately at the time of the call. Note that - symlinks are ignored while performing this path conversion. - cygexec - Treat all files below mount point as cygwin executables. - dos - Always convert leading spaces and trailing dots and spaces to - characters in the UNICODE private use area. This allows to use - broken filesystems which only allow DOS filenames, even if they - are not recognized as such by Cygwin. - exec - Treat all files below mount point as executable. - ihash - Always fake inode numbers rather than using the ones returned - by the filesystem. This allows to use broken filesystems which - don't return unambiguous inode numbers, even if they are not - recognized as such by Cygwin. - noacl - Ignore ACLs and fake POSIX permissions. - nosuid - No suid files are allowed (currently unimplemented) - notexec - Treat all files below mount point as not executable. - override - Override immutable mount points. - posix=0 - Switch off case sensitivity for paths under this mount point. - posix=1 - Switch on case sensitivity for paths under this mount point - (default). - text - Files default to CRLF text mode line endings. -</screen> - -<para>For a more complete description of the mount options and the -<filename>/etc/fstab</filename> file, see -<xref linkend="mount-table"></xref>.</para> - -<para>Note that all mount points added with <command>mount</command> are -user mount points. System mount points can only be specified in -the <filename>/etc/fstab</filename> file.</para> - -<para>If you added mount points to <filename>/etc/fstab</filename> or your -<filename>/etc/fstab.d/<username></filename> file, you can add these -mount points to your current user session using the <literal>-a/--all</literal> -option, or by specifing the posix path alone on the command line. As an -example, consider you added a mount point with the POSIX path -<filename>/my/mount</filename>. You can add this mount point with either -one of the following two commands to your current user session.</para> - -<screen> -<prompt>$</prompt> <userinput>mount /my/mount</userinput> -<prompt>$</prompt> <userinput>mount -a</userinput> -</screen> - -<para>The first command just adds the <filename>/my/mount</filename> mount -point to your current session, the <command>mount -a</command> adds all -new mount points to your user session.</para> - -<para>If you change a mount point to point to another native path, or -if you changed the flags of a mount point, you have to <command>umount</command> -the mount point first, before you can add it again. Please note that -all such added mount points are added as user mount points, and that the -rule that system mount points can't be removed or replaced in a running -session still applies.</para> - -<para>To bind a POSIX path to another POSIX path, use the -<literal>bind</literal> mount flag.</para> - -<screen> -<prompt>$</prompt> <userinput>mount -o bind /var /usr/var</userinput> -</screen> - -<para>This command makes the file hirarchy under <filename>/var</filename> -additionally available under <filename>/usr/var</filename>.</para> - -<para> -The <literal>-m</literal> option causes the <command>mount</command> utility -to output the current mount table in a series of fstab entries. -You can save this output as a backup when experimenting with the mount table. -Copy the output to <filename>/etc/fstab</filename> to restore the old state. -It also makes moving your settings to a different machine much easier.</para> - -</sect3> - -<sect3 id="utils-cygdrive"><title>Cygdrive mount points</title> - -<para>Whenever Cygwin cannot use any of the existing mounts to convert -from a particular Win32 path to a POSIX one, Cygwin will, instead, -convert to a POSIX path using a default mount point: -<filename>/cygdrive</filename>. For example, if Cygwin accesses -<filename>z:\foo</filename> and the z drive is not currently in the -mount table, then <filename>z:\</filename> will be accessible as -<filename>/cygdrive/z</filename>. The <command>mount</command> utility -can be used to change this default automount prefix through the use of the -"--change-cygdrive-prefix" option. In the following example, we will -set the automount prefix to <filename>/mnt</filename>:</para> - -<example id="utils-cygdrive-ex"> -<title>Changing the default prefix</title> -<screen> -<prompt>$</prompt> <userinput>mount --change-cygdrive-prefix /mnt</userinput> -</screen> -</example> - -<para>Note that the cygdrive prefix can be set both per-user and system-wide, -and that as with all mounts, a user-specific mount takes precedence over the -system-wide setting. The <command>mount</command> utility creates system-wide -mounts by default if you do not specify a type. -You can always see the user and system cygdrive prefixes with the -<literal>-p</literal> option. Using the <literal>--options</literal> -flag with <literal>--change-cygdrive-prefix</literal> makes all new -automounted filesystems default to this set of options. For instance -(using the short form of the command line flags)</para> - -<example id="utils-cygdrive-ex2"> -<title>Changing the default prefix with specific mount options</title> -<screen> -<prompt>$</prompt> <userinput>mount -c /mnt -o binary,noacl</userinput> -</screen> -</example> - - -</sect3> - -<sect3 id="utils-limitations"><title>Limitations</title> - -<para>Limitations: there is a hard-coded limit of 30 mount -points. Also, although you can mount to pathnames that do not start -with "/", there is no way to make use of such mount points.</para> - -<para>Normally the POSIX mount point in Cygwin is an existing empty -directory, as in standard UNIX. If this is the case, or if there is a -place-holder for the mount point (such as a file, a symbolic link -pointing anywhere, or a non-empty directory), you will get the expected -behavior. Files present in a mount point directory before the mount -become invisible to Cygwin programs. -</para> - -<para>It is sometimes desirable to mount to a non-existent directory, -for example to avoid cluttering the root directory with names -such as -<filename>a</filename>, <filename>b</filename>, <filename>c</filename> -pointing to disks. -Although <command>mount</command> will give you a warning, most -everything will work properly when you refer to the mount point -explicitly. Some strange effects can occur however. -For example if your current working directory is -<filename>/dir</filename>, -say, and <filename>/dir/mtpt</filename> is a mount point, then -<filename>mtpt</filename> will not show up in an <command>ls</command> -or -<command>echo *</command> command and <command>find .</command> will -not -find <filename>mtpt</filename>. -</para> - -</sect3> - -</sect2> - -<sect2 id="passwd"><title>passwd</title> - -<screen> -Usage: passwd [OPTION] [USER] -Change USER's password or password attributes. - -User operations: - -l, --lock lock USER's account. - -u, --unlock unlock USER's account. - -c, --cannot-change USER can't change password. - -C, --can-change USER can change password. - -e, --never-expires USER's password never expires. - -E, --expires USER's password expires according to system's - password aging rule. - -p, --pwd-not-required no password required for USER. - -P, --pwd-required password is required for USER. - -R, --reg-store-pwd enter password to store it in the registry for - later usage by services to be able to switch - to this user context with network credentials. - -System operations: - -i, --inactive NUM set NUM of days before inactive accounts are disabled - (inactive accounts are those with expired passwords). - -n, --minage DAYS set system minimum password age to DAYS days. - -x, --maxage DAYS set system maximum password age to DAYS days. - -L, --length LEN set system minimum password length to LEN. - -Other options: - -d, --logonserver SERVER connect to SERVER (e.g. domain controller). - Default server is the local system, unless - changing the current user, in which case the - default is the content of $LOGONSERVER. - -S, --status display password status for USER (locked, expired, - etc.) plus global system password settings. - -h, --help output usage information and exit. - -v, --version output version information and exit. - -If no option is given, change USER's password. If no user name is given, -operate on current user. System operations must not be mixed with user -operations. Don't specify a USER when triggering a system operation. - -Don't specify a user or any other option together with the -R option. -Non-Admin users can only store their password if cygserver is running. -Note that storing even obfuscated passwords in the registry is not overly -secure. Use this feature only if the machine is adequately locked down. -Don't use this feature if you don't need network access within a remote -session. You can delete your stored password by using `passwd -R' and -specifying an empty password. -</screen> - -<para> <command>passwd</command> changes passwords for user accounts. -A normal user may only change the password for their own account, -but administrators may change passwords on any account. -<command>passwd</command> also changes account information, such as -password expiry dates and intervals.</para> - -<para>For password changes, the user is first prompted for their old -password, if one is present. This password is then encrypted and -compared against the stored password. The user has only one chance to -enter the correct password. The administrators are permitted to -bypass this step so that forgotten passwords may be changed.</para> - -<para>The user is then prompted for a replacement password. -<command>passwd</command> will prompt twice for this replacement and -compare the second entry against the first. Both entries are required to -match in order for the password to be changed.</para> - -<para>After the password has been entered, password aging information -is checked to see if the user is permitted to change their password -at this time. If not, <command>passwd</command> refuses to change the -password and exits.</para> - -<para> -To get current password status information, use the -<literal>-S</literal> option. Administrators can use -<command>passwd</command> to perform several account maintenance -functions (users may perform some of these functions on their own -accounts). Accounts may be locked with the <literal>-l</literal> flag -and unlocked with the <literal>-u</literal> flag. Similarly, -<literal>-c</literal> disables a user's ability to change passwords, and -<literal>-C</literal> allows a user to change passwords. For password -expiry, the <literal>-e</literal> option disables expiration, while the -<literal>-E</literal> option causes the password to expire according to -the system's normal aging rules. Use <literal>-p</literal> to disable -the password requirement for a user, or <literal>-P</literal> to require -a password. -</para> - -<para>Administrators can also use <command>passwd</command> to change -system-wide password expiry and length requirements with the -<literal>-i</literal>, <literal>-n</literal>, <literal>-x</literal>, -and <literal>-L</literal> options. The <literal>-i</literal> -option is used to disable an account after the password has been expired -for a number of days. After a user account has had an expired password -for <emphasis>NUM</emphasis> days, the user may no longer sign on to -the account. The <literal>-n</literal> option is -used to set the minimum number of days before a password may be changed. -The user will not be permitted to change the password until -<emphasis>MINDAYS</emphasis> days have elapsed. The -<literal>-x</literal> option is used to set the maximum number of days -a password remains valid. After <emphasis>MAXDAYS</emphasis> days, the -password is required to be changed. Allowed values for the above options -are 0 to 999. The <literal>-L</literal> option sets the minimum length of -allowed passwords for users who don't belong to the administrators group -to <emphasis>LEN</emphasis> characters. Allowed values for the minimum -password length are 0 to 14. In any of the above cases, a value of 0 -means `no restrictions'.</para> - -<para> -All operations affecting the current user are by default run against -the logon server of the current user (taken from the environment -variable <envar>LOGONSERVER</envar>. When password or account information -of other users should be changed, the default server is the local system. -To change a user account on a remote machine, use the <literal>-d</literal> -option to specify the machine to run the command against. Note that the -current user must be a valid member of the administrators group on the remote -machine to perform such actions. -</para> - -<para>Users can use the <command>passwd -R</command> to enter -a password which then gets stored in a special area of the registry on the -local system, which is also used by Windows to store passwords of accounts -running Windows services. When a privileged Cygwin application calls the -<command>set{e}uid(user_id)</command> system call, Cygwin checks if a -password for that user has been stored in this registry area. If so, it -uses this password to switch to this user account using that password. -This allows you to logon through, for instance, <command>ssh</command> with -public key authentication and get a full qualified user token with -all credentials for network access. However, the method has some -drawbacks security-wise. This is explained in more detail in -<xref linkend="ntsec"></xref>.</para> - -<para>Please note that storing passwords in that registry area is a -privileged operation which only administrative accounts are allowed to -do. If normal, non-admin users should be allowed to enter their -passwords using <command>passwd -R</command>, it's required to run -<command>cygserver</command> as a service under the LocalSystem account -before running <command>passwd -R</command>. This only affects storing -passwords. Using passwords in privileged processes does not require -<command>cygserver</command> to run.</para> - -<para>Limitations: Users may not be able to change their password on -some systems.</para> - -</sect2> - -<sect2 id="ps"><title>ps</title> - -<screen> -Usage: ps [-aefls] [-u UID] -Report process status - - -a, --all show processes of all users - -e, --everyone show processes of all users - -f, --full show process uids, ppids - -h, --help output usage information and exit - -l, --long show process uids, ppids, pgids, winpids - -p, --process show information for specified PID - -s, --summary show process summary - -u, --user list processes owned by UID - -v, --version output version information and exit - -W, --windows show windows as well as cygwin processes -With no options, ps outputs the long format by default -</screen> - -<para>The <command>ps</command> program gives the status of all the -Cygwin processes running on the system (ps = "process status"). Due -to the limitations of simulating a POSIX environment under Windows, -there is little information to give. -</para> - -<para> -The PID column is the process ID you need to give to the -<command>kill</command> command. The PPID is the parent process ID, -and PGID is the process group ID. The WINPID column is the process -ID displayed by NT's Task Manager program. The TTY column gives which -pseudo-terminal a process is running on, or a <literal>'?'</literal> -for services. The UID column shows which user owns each process. -STIME is the time the process was started, and COMMAND gives the name -of the program running. Listings may also have a status flag in -column zero; <literal>S</literal> means stopped or suspended (in other -words, in the background), <literal>I</literal> means waiting for -input or interactive (foreground), and <literal>O</literal> means -waiting to output. -</para> - -<para> -By default, <command>ps</command> will only show processes owned by the -current user. With either the <literal>-a</literal> or <literal>-e</literal> -option, all user's processes (and system processes) are listed. There are -historical UNIX reasons for the synonomous options, which are functionally -identical. The <literal>-f</literal> option outputs a "full" listing with -usernames for UIDs. The <literal>-l</literal> option is the default display -mode, showing a "long" listing with all the above columns. The other display -option is <literal>-s</literal>, which outputs a shorter listing of just -PID, TTY, STIME, and COMMAND. The <literal>-u</literal> option allows you -to show only processes owned by a specific user. The <literal>-p</literal> -option allows you to show information for only the process with the -specified PID. The <literal>-W</literal> -option causes <command>ps</command> show non-Cygwin Windows processes as -well as Cygwin processes. The WINPID is also the PID, and they can be killed -with the Cygwin <command>kill</command> command's <literal>-f</literal> -option. -</para> - -</sect2> - -<sect2 id="regtool"><title>regtool</title> - -<screen> -Usage: regtool [OPTION] (add|check|get|list|remove|unset|load|unload|save) KEY -View or edit the Win32 registry - -Actions: - add KEY\SUBKEY add new SUBKEY - check KEY exit 0 if KEY exists, 1 if not - get KEY\VALUE prints VALUE to stdout - list KEY list SUBKEYs and VALUEs - remove KEY remove KEY - set KEY\VALUE [data ...] set VALUE - unset KEY\VALUE removes VALUE from KEY - load KEY\SUBKEY PATH load hive from PATH into new SUBKEY - unload KEY\SUBKEY unload hive and remove SUBKEY - save KEY\SUBKEY PATH save SUBKEY into new hive PATH - -Options for 'list' Action: - -k, --keys print only KEYs - -l, --list print only VALUEs - -p, --postfix like ls -p, appends '\' postfix to KEY names - -Options for 'get' Action: - -b, --binary print REG_BINARY data as hex bytes - -n, --none print data as stream of bytes as stored in registry - -x, --hex print numerical data as hex numbers - -Options for 'set' Action: - -b, --binary set type to REG_BINARY (hex args or '-') - -D, --dword-be set type to REG_DWORD_BIG_ENDIAN - -e, --expand-string set type to REG_EXPAND_SZ - -i, --integer set type to REG_DWORD - -m, --multi-string set type to REG_MULTI_SZ - -n, --none set type to REG_NONE - -Q, --qword set type to REG_QWORD - -s, --string set type to REG_SZ - -Options for 'set' and 'unset' Actions: - -K<c>, --key-separator[=]<c> set key separator to <c> instead of '\' - -Other Options: - -h, --help output usage information and exit - -q, --quiet no error output, just nonzero return if KEY/VALUE missing - -v, --verbose verbose output, including VALUE contents when applicable - -w, --wow64 access 64 bit registry view (ignored on 32 bit Windows) - -W, --wow32 access 32 bit registry view (ignored on 32 bit Windows) - -V, --version output version information and exit - -KEY is in the format [host]\prefix\KEY\KEY\VALUE, where host is optional -remote host in either \\hostname or hostname: format and prefix is any of: - root HKCR HKEY_CLASSES_ROOT (local only) - config HKCC HKEY_CURRENT_CONFIG (local only) - user HKCU HKEY_CURRENT_USER (local only) - machine HKLM HKEY_LOCAL_MACHINE - users HKU HKEY_USERS - -You can use forward slash ('/') as a separator instead of backslash, in -that case backslash is treated as escape character -Example: regtool.exe get '\user\software\Microsoft\Clock\iFormat' -</screen> - -<para>The <command>regtool</command> program allows shell scripts -to access and modify the Windows registry. Note that modifying the -Windows registry is dangerous, and carelessness here can result -in an unusable system. Be careful.</para> - -<para>The <literal>-v</literal> option means "verbose". For most -commands, this causes additional or lengthier messages to be printed. -Conversely, the <literal>-q</literal> option supresses error messages, -so you can use the exit status of the program to detect if a key -exists or not (for example).</para> - -<para>The <literal>-w</literal> option allows you to access the 64 bit view -of the registry. Several subkeys exist in a 32 bit and a 64 bit version -when running on Windows 64. Since Cygwin is running in 32 bit mode, it -only has access to the 32 bit view of these registry keys. When using -the <literal>-w</literal> switch, the 64 bit view is used and -<command>regtool</command> can access the entire registry. -This option is simply ignored when running on 32 bit Windows versions. -</para> - -<para>The <literal>-W</literal> option allows you to access the 32 bit view -on the registry. The purpose of this option is mainly for symmetry. It -permits creation of OS agnostic scripts which would also work in a hypothetical -64 bit version of Cygwin.</para> - -<para>You must provide <command>regtool</command> with an -<emphasis>action</emphasis> following options (if any). Currently, -the action must be <literal>add</literal>, <literal>set</literal>, -<literal>check</literal>, <literal>get</literal>, <literal>list</literal>, -<literal>remove</literal>, <literal>set</literal>, or <literal>unset</literal>. -</para> - -<para>The <literal>add</literal> action adds a new key. The -<literal>check</literal> action checks to see if a key exists (the -exit code of the program is zero if it does, nonzero if it does not). -The <literal>get</literal> action gets the value of a key, -and prints it (and nothing else) to stdout. Note: if the value -doesn't exist, an error message is printed and the program returns a -non-zero exit code. If you give <literal>-q</literal>, it doesn't -print the message but does return the non-zero exit code.</para> - -<para> -The <literal>list</literal> action lists the subkeys and values -belonging to the given key. With <literal>list</literal>, the -<literal>-k</literal> option instructs <command>regtool</command> -to print only KEYs, and the <literal>-l</literal> option to print -only VALUEs. The <literal>-p</literal> option postfixes a -<literal>'/'</literal> to each KEY, but leave VALUEs with no -postfix. The <literal>remove</literal> action -removes a key. Note that you may need to remove everything in the key -before you may remove it, but don't rely on this stopping you from -accidentally removing too much. -</para> - -<para>The <literal>get</literal> action prints a value within a key. -With the <literal>-b</literal> option, data is printed as hex bytes. -<literal>-n</literal> allows to print the data as a typeless stream of -bytes. Integer values (REG_DWORD, REG_QWORD) are usually printed -as decimal values. The <literal>-x</literal> option allows to print -the numbers as hexadecimal values.</para> - -<para>The <literal>set</literal> action sets a value within a key. -<literal>-b</literal> means it's binary data (REG_BINARY). -The binary values are specified as hex bytes in the argument list. -If the argument is <literal>'-'</literal>, binary data is read -from stdin instead. -<literal>-d</literal> or <literal>-i</literal> means the value is a 32 bit -integer value (REG_DWORD). -<literal>-D</literal> means the value is a 32 bit integer value in -Big Endian representation (REG_DWORD_BIG_ENDIAN). -<literal>-Q</literal> means the value is a 64 bit integer value (REG_QWORD). -<literal>-s</literal> means the value is a string (REG_SZ). -<literal>-e</literal> means it's an expanding string (REG_EXPAND_SZ) -that contains embedded environment variables. -<literal>-m</literal> means it's a multi-string (REG_MULTI_SZ). -If you don't specify one of these, <command>regtool</command> tries to -guess the type based on the value you give. If it looks like a -number, it's a DWORD, unless it's value doesn't fit into 32 bit, in which -case it's a QWORD. If it starts with a percent, it's an expanding -string. If you give multiple values, it's a multi-string. Else, it's -a regular string.</para> - -<para>The <literal>unset</literal> action removes a value from a key.</para> - -<para>The <literal>load</literal> action adds a new subkey and loads -the contents of a registry hive into it. -The parent key must be HKEY_LOCAL_MACHINE or HKEY_USERS. -The <literal>unload</literal> action unloads the file and removes -the subkey. -</para> - -<para>The <literal>save</literal> action saves a subkey into a -registry hive. -</para> - -<para> -By default, the last "\" or "/" is assumed to be the separator between the -key and the value. You can use the <literal>-K</literal> option to provide -an alternate key/value separator character. -</para> - -</sect2> - -<sect2 id="setfacl"><title>setfacl</title> - -<screen> -Usage: setfacl [-r] (-f ACL_FILE | -s acl_entries) FILE... - setfacl [-r] ([-d acl_entries] [-m acl_entries]) FILE... -Modify file and directory access control lists (ACLs) - - -d, --delete delete one or more specified ACL entries - -f, --file set ACL entries for FILE to ACL entries read - from a ACL_FILE - -m, --modify modify one or more specified ACL entries - -r, --replace replace mask entry with maximum permissions - needed for the file group class - -s, --substitute substitute specified ACL entries for the - ACL of FILE - -h, --help output usage information and exit - -v, --version output version information and exit - -At least one of (-d, -f, -m, -s) must be specified -</screen> - -<para> -For each file given as parameter, <command>setfacl</command> will -either replace its complete ACL (<literal>-s</literal>, <literal>-f</literal>), -or it will add, modify, or delete ACL entries. -For more information on Cygwin and Windows ACLs, see -see <xref linkend="ntsec"></xref> in the Cygwin User's Guide. -</para> - -<para> -Acl_entries are one or more comma-separated ACL entries -from the following list: -<screen> - u[ser]::perm - u[ser]:uid:perm - g[roup]::perm - g[roup]:gid:perm - m[ask]::perm - o[ther]::perm -</screen> -Default entries are like the above with the additional -default identifier. For example: -<screen> - d[efault]:u[ser]:uid:perm -</screen> -</para> - -<para> -<emphasis>perm</emphasis> is either a 3-char permissions string in the form -"rwx" with the character <literal>'-'</literal> for no permission -or it is the octal representation of the permissions, a -value from 0 (equivalent to "---") to 7 ("rwx"). -<emphasis>uid</emphasis> is a user name or a numerical uid. -<emphasis>gid</emphasis> is a group name or a numerical gid. -</para> - -<para> -The following options are supported: -</para> - -<para> -<literal>-d</literal> -Delete one or more specified entries from the file's ACL. -The owner, group and others entries must not be deleted. -Acl_entries to be deleted should be specified without -permissions, as in the following list: -<screen> - u[ser]:uid - g[roup]:gid - d[efault]:u[ser]:uid - d[efault]:g[roup]:gid - d[efault]:m[ask]: - d[efault]:o[ther]: -</screen> -</para> - -<para> -<literal>-f</literal> -Take the Acl_entries from ACL_FILE one per line. Whitespace -characters are ignored, and the character "#" may be used -to start a comment. The special filename "-" indicates -reading from stdin. Note that you can use this with -<command>getfacl</command> and <command>setfacl</command> to copy -ACLs from one file to another: -<screen> -$ getfacl source_file | setfacl -f - target_file -</screen> -</para> - -<para> -Required entries are: -one user entry for the owner of the file, -one group entry for the group of the file, and -one other entry. -</para> - -<para> -If additional user and group entries are given: -a mask entry for the file group class of the file, and -no duplicate user or group entries with the same uid/gid. -</para> - -<para> -If it is a directory: -one default user entry for the owner of the file, -one default group entry for the group of the file, -one default mask entry for the file group class, and -one default other entry. -</para> - -<para> -<literal>-m</literal> -Add or modify one or more specified ACL entries. Acl_entries is a -comma-separated list of entries from the same list as above. -</para> - -<para> -<literal>-r</literal> -Causes the permissions specified in the mask -entry to be ignored and replaced by the maximum permissions needed for -the file group class. -</para> - -<para> -<literal>-s</literal> -Like <literal>-f</literal>, but substitute the -file's ACL with Acl_entries specified in a comma-separated list on the -command line. -</para> - -<para> -While the <literal>-d</literal> and <literal>-m</literal> options may be used -in the same command, the <literal>-f</literal> and <literal>-s</literal> -options may be used only exclusively. -</para> - -<para> -Directories may contain default ACL entries. Files created -in a directory that contains default ACL entries will have -permissions according to the combination of the current umask, -the explicit permissions requested and the default ACL entries -</para> - -<para> -Limitations: Under Cygwin, the default ACL entries are not taken into -account currently. -</para> - -</sect2> - -<sect2 id="ssp"><title>ssp</title> - -<screen> -Usage: ssp [options] low_pc high_pc command... -Single-step profile COMMAND - - -c, --console-trace trace every EIP value to the console. *Lots* slower. - -d, --disable disable single-stepping by default; use - OutputDebugString ("ssp on") to enable stepping - -e, --enable enable single-stepping by default; use - OutputDebugString ("ssp off") to disable stepping - -h, --help output usage information and exit - -l, --dll enable dll profiling. A chart of relative DLL usage - is produced after the run. - -s, --sub-threads trace sub-threads too. Dangerous if you have - race conditions. - -t, --trace-eip trace every EIP value to a file TRACE.SSP. This - gets big *fast*. - -v, --verbose output verbose messages about debug events. - -V, --version output version information and exit - -Example: ssp 0x401000 0x403000 hello.exe -</screen> - -<para> -SSP - The Single Step Profiler -</para> - -<para> -Original Author: DJ Delorie -</para> - -<para> -The SSP is a program that uses the Win32 debug API to run a program -one ASM instruction at a time. It records the location of each -instruction used, how many times that instruction is used, and all -function calls. The results are saved in a format that is usable by -the profiling program <command>gprof</command>, although -<command>gprof</command> will claim the values -are seconds, they really are instruction counts. More on that later. -</para> - -<para> -Because the SSP was originally designed to profile the cygwin DLL, it -does not automatically select a block of code to report statistics on. -You must specify the range of memory addresses to keep track of -manually, but it's not hard to figure out what to specify. Use the -"objdump" program to determine the bounds of the target's ".text" -section. Let's say we're profiling cygwin1.dll. Make sure you've -built it with debug symbols (else <command>gprof</command> won't run) -and run objdump like this: - -<screen> -$ objdump -h cygwin1.dll -</screen> - -It will print a report like this: -<screen> -cygwin1.dll: file format pei-i386 - -Sections: -Idx Name Size VMA LMA File off Algn - 0 .text 0007ea00 61001000 61001000 00000400 2**2 - CONTENTS, ALLOC, LOAD, READONLY, CODE, DATA - 1 .data 00008000 61080000 61080000 0007ee00 2**2 - CONTENTS, ALLOC, LOAD, DATA - . . . -</screen> -</para> - -<para> -The only information we're concerned with are the VMA of -the .text section and the VMA of the section after it -(sections are usually contiguous; you can also add the -Size to the VMA to get the end address). In this case, -the VMA is 0x61001000 and the ending address is either -0x61080000 (start of .data method) or 0x0x6107fa00 (VMA+Size -method). -</para> - -<para> -There are two basic ways to use SSP - either profiling a whole -program, or selectively profiling parts of the program. -</para> - -<para> -To profile a whole program, just run <command>ssp</command> without options. -By default, it will step the whole program. Here's a simple example, using -the numbers above: - -<screen> -$ ssp 0x61001000 0x61080000 hello.exe -</screen> - -This will step the whole program. It will take at least 8 minutes on -a PII/300 (yes, really). When it's done, it will create a file called -"gmon.out". You can turn this data file into a readable report with -<command>gprof</command>: - -<screen> -$ gprof -b cygwin1.dll -</screen> - -The "-b" means 'skip the help pages'. You can omit this until you're -familiar with the report layout. The <command>gprof</command> documentation -explains a lot about this report, but <command>ssp</command> changes a few -things. For example, the first part of the report reports the amount of time -spent in each function, like this: - -<screen> -Each sample counts as 0.01 seconds. - % cumulative self self total - time seconds seconds calls ms/call ms/call name - 10.02 231.22 72.43 46 1574.57 1574.57 strcspn - 7.95 288.70 57.48 130 442.15 442.15 strncasematch -</screen> - -The "seconds" columns are really CPU opcodes, 1/100 second per opcode. -So, "231.22" above means 23,122 opcodes. The ms/call values are 10x -too big; 1574.57 means 157.457 opcodes per call. Similar adjustments -need to be made for the "self" and "children" columns in the second -part of the report. -</para> - -<para> -OK, so now we've got a huge report that took a long time to generate, -and we've identified a spot we want to work on optimizing. Let's say -it's the time() function. We can use SSP to selectively profile this -function by using OutputDebugString() to control SSP from within the -program. Here's a sample program: - -<screen> - #include <windows.h> - main() - { - time_t t; - OutputDebugString("ssp on"); - time(&t); - OutputDebugString("ssp off"); - } -</screen> -</para> - -<para> -Then, add the <literal>-d</literal> option to ssp to default to -*disabling* profiling. The program will run at full speed until the first -OutputDebugString, then step until the second. -You can then use <command>gprof</command> (as usual) to see the performance -profile for just that portion of the program's execution. -</para> - -<para> -There are many options to ssp. Since step-profiling makes your -program run about 1,000 times slower than normal, it's best to -understand all the options so that you can narrow down the parts -of your program you need to single-step. -</para> - -<para> -<literal>-v</literal> - verbose. This prints messages about threads -starting and stopping, OutputDebugString calls, DLLs loading, etc. -</para> - -<para> -<literal>-t</literal> and <literal>-c</literal> - tracing. -With <literal>-t</literal>, *every* step's address is written -to the file "trace.ssp". This can be used to help debug functions, -since it can trace multiple threads. Clever use of scripts can match -addresses with disassembled opcodes if needed. Warning: creates -*huge* files, very quickly. <literal>-c</literal> prints each address to -the console, useful for debugging key chunks of assembler. Use -<literal>addr2line -C -f -s -e foo.exe < trace.ssp > lines.ssp</literal> -and then <literal>perl cvttrace</literal> to convert to symbolic traces. -</para> - -<para> -<literal>-s</literal> - subthreads. Usually, you only need to trace the -main thread, but sometimes you need to trace all threads, so this enables that. -It's also needed when you want to profile a function that only a -subthread calls. However, using OutputDebugString automatically -enables profiling on the thread that called it, not the main thread. -</para> - -<para> -<literal>-l</literal> - dll profiling. Generates a pretty table of how much -time was spent in each dll the program used. No sense optimizing a function in -your program if most of the time is spent in the DLL. -I usually use the <literal>-v</literal>, <literal>-s</literal>, and -<literal>-l</literal> options: - -<screen> -$ ssp <literal>-v</literal> <literal>-s</literal> <literal>-l</literal> <literal>-d</literal> 0x61001000 0x61080000 hello.exe -</screen> -</para> -</sect2> - -<sect2 id="strace"><title>strace</title> - -<screen> -Usage: strace.exe [OPTIONS] <command-line> -Usage: strace.exe [OPTIONS] -p <pid> -Trace system calls and signals - - -b, --buffer-size=SIZE set size of output file buffer - -d, --no-delta don't display the delta-t microsecond timestamp - -f, --trace-children trace child processes (toggle - default true) - -h, --help output usage information and exit - -m, --mask=MASK set message filter mask - -n, --crack-error-numbers output descriptive text instead of error - numbers for Windows errors - -o, --output=FILENAME set output file to FILENAME - -p, --pid=n attach to executing program with cygwin pid n - -q, --quiet toggle "quiet" flag. Defaults to on if "-p", - off otherwise. - -S, --flush-period=PERIOD flush buffered strace output every PERIOD secs - -t, --timestamp use an absolute hh:mm:ss timestamp insted of - the default microsecond timestamp. Implies -d - -T, --toggle toggle tracing in a process already being - -u, --usecs toggle printing of microseconds timestamp - traced. Requires -p <pid> - -v, --version output version information and exit - -w, --new-window spawn program under test in a new window - - MASK can be any combination of the following mnemonics and/or hex values - (0x is optional). Combine masks with '+' or ',' like so: - - --mask=wm+system,malloc+0x00800 - - Mnemonic Hex Corresponding Def Description - ========================================================================= - all 0x000001 (_STRACE_ALL) All strace messages. - flush 0x000002 (_STRACE_FLUSH) Flush output buffer after each message. - inherit 0x000004 (_STRACE_INHERIT) Children inherit mask from parent. - uhoh 0x000008 (_STRACE_UHOH) Unusual or weird phenomenon. - syscall 0x000010 (_STRACE_SYSCALL) System calls. - startup 0x000020 (_STRACE_STARTUP) argc/envp printout at startup. - debug 0x000040 (_STRACE_DEBUG) Info to help debugging. - paranoid 0x000080 (_STRACE_PARANOID) Paranoid info. - termios 0x000100 (_STRACE_TERMIOS) Info for debugging termios stuff. - select 0x000200 (_STRACE_SELECT) Info on ugly select internals. - wm 0x000400 (_STRACE_WM) Trace Windows msgs (enable _strace_wm). - sigp 0x000800 (_STRACE_SIGP) Trace signal and process handling. - minimal 0x001000 (_STRACE_MINIMAL) Very minimal strace output. - pthread 0x002000 (_STRACE_PTHREAD) Pthread calls. - exitdump 0x004000 (_STRACE_EXITDUMP) Dump strace cache on exit. - system 0x008000 (_STRACE_SYSTEM) Serious error; goes to console and log. - nomutex 0x010000 (_STRACE_NOMUTEX) Don't use mutex for synchronization. - malloc 0x020000 (_STRACE_MALLOC) Trace malloc calls. - thread 0x040000 (_STRACE_THREAD) Thread-locking calls. - special 0x100000 (_STRACE_SPECIAL) Special debugging printfs for - non-checked-in code -</screen> - -<para>The <command>strace</command> program executes a program, and -optionally the children of the program, reporting any Cygwin DLL output -from the program(s) to stdout, or to a file with the <literal>-o</literal> -option. With the <literal>-w</literal> option, you can start an strace -session in a new window, for example: - -<screen> -$ strace -o tracing_output -w sh -c 'while true; do echo "tracing..."; done' & -</screen> -This is particularly useful for <command>strace</command> sessions that -take a long time to complete. -</para> - -<para> -Note that <command>strace</command> is a standalone Windows program and so does -not rely on the Cygwin DLL itself (you can verify this with -<command>cygcheck</command>). As a result it does not understand symlinks. -This program is mainly useful for debugging the Cygwin DLL itself.</para> - -</sect2> - -<sect2 id="umount"><title>umount</title> - -<screen> -Usage: umount.exe [OPTION] [<posixpath>] -Unmount filesystems - - -h, --help output usage information and exit - -U, --remove-user-mounts remove all user mounts - -v, --version output version information and exit -</screen> - -<para>The <command>umount</command> program removes mounts from the -mount table in the current session. If you specify a POSIX path that -corresponds to a current mount point, <command>umount</command> will -remove it from the current mount table. Note that you can only remove -user mount points. The <literal>-U</literal> flag may be used to -specify removing all user mount points from the current user session.</para> - -<para>See <xref linkend="mount-table"></xref> for more information on the mount -table.</para> -</sect2> - -</sect1> |