Age | Commit message (Collapse) | Author |
|
* configure.in (GDB_TK): Add tcl directories conditional on
gdb/gdbtk directory being present.
* configure: Regenerate.
|
|
* include/zmouse.h (WHEEL_DELTA): Guard against prior
definition.
(WHEEL_PAGESCROLL): Likewise.
(SPI_SETWHEELSCROLLLINES): Define, if not already done.
|
|
* include/zmouse.h (WHEEL_DELTA): Guard against prior
definition.
(WHEEL_PAGESCROLL): Likewise.
(SPI_SETWHEELSCROLLLINES): Define, if not already done.
|
|
leaving.
|
|
(WHEEL_PAGESCROLL): Add define.
|
|
by gcc if LD is not defined and we are not doing a Canadian Cross.
* configure: Rebuilt.
|
|
names tagTBNOTIFY[AW] and typedefs. Add defines for backward
compatability. Add RECT field. Add UNICODE mappings for new
names.
(tagNMREBARCHEVRON): Add struct and typedefs for
_WIN32_IE >= 0x0500.
|
|
(LVHITTESTINFO): Likewise.
* include/wingdi.h (GRADIENT_TRIANGLE): Add structure.
(GRADIENT_RECT): Likewise.
|
|
* include/winerror.h (ERROR_OPLOCK_NOT_GRANTED,
ERROR_INVALID_OPLOCK_PROTOCOL, ERROR_SOURCE_ELEMENT_EMPTY,
ERROR_DESTINATION_ELEMENT_FULL, ERROR_ILLEGAL_ELEMENT_ADDRESS,
ERROR_MAGAZINE_NOT_PRESENT, ERROR_DEVICE_REINITIALIZATION_NEEDED,
ERROR_DEVICE_REQUIRES_CLEANING, ERROR_DEVICE_DOOR_OPEN,
ERROR_DEVICE_NOT_CONNECTED, ERROR_NOT_FOUND, ERROR_NO_MATCH,
ERROR_SET_NOT_FOUND, ERROR_NO_TRACKING_SERVICE,
ERROR_JOURNAL_DELETE_IN_PROGRESS, ERROR_JOURNAL_NOT_ACTIVE,
ERROR_JOURNAL_ENTRY_DELETED, ERROR_ONLY_IF_CONNECTED,
ERROR_NOT_SUPPORTED_ON_SBS, ERROR_SERVER_SHUTDOWN_IN_PROGRESS,
ERROR_MUTUAL_AUTH_FAILED, ERROR_TIME_SKEW, ERROR_DEVICE_REMOVED,
RPC_S_INVALID_ASYNC_HANDLE, RPC_S_INVALID_ASYNC_CALL,
RPC_X_PIPE_CLOSED, RPC_X_PIPE_DISCIPLINE_ERROR, RPC_X_PIPE_EMPTY,
ERROR_CANT_ACCESS_FILE, ERROR_CANT_RESOLVE_FILENAME,
ERROR_WMI_GUID_NOT_FOUND, ERROR_WMI_INSTANCE_NOT_FOUND,
ERROR_WMI_ITEMID_NOT_FOUND, ERROR_WMI_TRY_AGAIN, ERROR_WMI_READ_ONLY,
ERROR_WMI_SET_FAILURE, ERROR_TRANSPORT_FULL, ERROR_FILE_OFFLINE,
ERROR_REMOTE_STORAGE_NOT_ACTIVE, ERROR_REMOTE_STORAGE_MEDIA_ERROR,
ERROR_NOT_A_REPARSE_POINT, ERROR_REPARSE_ATTRIBUTE_CONFLICT,
ERROR_INVALID_REPARSE_DATA, ERROR_REPARSE_TAG_INVALID,
ERROR_REPARSE_TAG_MISMATCH, ERROR_FILE_ENCRYPTED,
ERROR_FILE_NOT_ENCRYPTED, ERROR_NOT_EXPORT_FORMAT,
ERROR_CTX_WINSTATION_NAME_INVALID, ERROR_CTX_INVALID_PD,
ERROR_CTX_PD_NOT_FOUND, ERROR_CTX_WD_NOT_FOUND,
ERROR_CTX_CLOSE_PENDING, ERROR_CTX_NO_OUTBUF,
ERROR_CTX_MODEM_INF_NOT_FOUND, ERROR_CTX_INVALID_MODEMNAME,
ERROR_CTX_MODEM_RESPONSE_ERROR, ERROR_CTX_MODEM_RESPONSE_TIMEOUT,
ERROR_CTX_MODEM_RESPONSE_NO_CARRIER,
ERROR_CTX_MODEM_RESPONSE_NO_DIALTONE, ERROR_CTX_MODEM_RESPONSE_BUSY,
ERROR_CTX_MODEM_RESPONSE_VOICE, ERROR_CTX_TD_ERROR,
ERROR_CTX_WINSTATION_NOT_FOUND, ERROR_CTX_WINSTATION_ALREADY_EXISTS,
ERROR_CTX_WINSTATION_BUSY, ERROR_CTX_BAD_VIDEO_MODE,
ERROR_CTX_GRAPHICS_INVALID, ERROR_CTX_NOT_CONSOLE,
ERROR_CTX_CLIENT_QUERY_TIMEOUT, ERROR_CTX_CONSOLE_DISCONNECT,
ERROR_CTX_CONSOLE_CONNECT, ERROR_CTX_SHADOW_DENIED,
ERROR_CTX_WINSTATION_ACCESS_DENIED, ERROR_CTX_INVALID_WD,
ERROR_CTX_SHADOW_INVALID, ERROR_CTX_SHADOW_DISABLED,
ERROR_CTX_CLIENT_LICENSE_IN_USE, ERROR_CTX_CLIENT_LICENSE_NOT_SET,
ERROR_CTX_LICENSE_NOT_AVAILABLE, ERROR_CTX_LICENSE_CLIENT_INVALID,
ERROR_CTX_LICENSE_EXPIRED, ERROR_DS_MEMBERSHIP_EVALUATED_LOCALLY,
ERROR_DS_NO_ATTRIBUTE_OR_VALUE, ERROR_DS_INVALID_ATTRIBUTE_SYNTAX,
ERROR_DS_ATTRIBUTE_TYPE_UNDEFINED, ERROR_DS_ATTRIBUTE_OR_VALUE_EXISTS,
ERROR_DS_BUSY, ERROR_DS_UNAVAILABLE, ERROR_DS_NO_RIDS_ALLOCATED,
ERROR_DS_NO_MORE_RIDS, ERROR_DS_INCORRECT_ROLE_OWNER,
ERROR_DS_RIDMGR_INIT_ERROR, ERROR_DS_OBJ_CLASS_VIOLATION,
ERROR_DS_CANT_ON_NON_LEAF, ERROR_DS_CANT_ON_RDN,
ERROR_DS_CANT_MOD_OBJ_CLASS, ERROR_DS_CROSS_DOM_MOVE_ERROR,
ERROR_DS_GC_NOT_AVAILABLE, ERROR_SHARED_POLICY,
ERROR_POLICY_OBJECT_NOT_FOUND, ERROR_POLICY_ONLY_IN_DS,
ERROR_DS_ADMIN_LIMIT_EXCEEDED, ERROR_DS_DS_REQUIRED,
ERROR_DS_SAM_INIT_FAILURE, ERROR_DS_SENSITIVE_GROUP_VIOLATION,
ERROR_DS_CANT_MOD_PRIMARYGROUPID, ERROR_DS_INVALID_GROUP_TYPE,
ERROR_DS_NO_NEST_GLOBALGROUP_IN_MIXEDDOMAIN,
ERROR_DS_NO_NEST_LOCALGROUP_IN_MIXEDDOMAIN,
ERROR_DS_GLOBAL_CANT_HAVE_LOCAL_MEMBER,
ERROR_DS_GLOBAL_CANT_HAVE_UNIVERSAL_MEMBER,
ERROR_DS_UNIVERSAL_CANT_HAVE_LOCAL_MEMBER,
ERROR_DS_GLOBAL_CANT_HAVE_CROSSDOMAIN_MEMBER,
ERROR_DS_LOCAL_CANT_HAVE_CROSSDOMAIN_LOCAL_MEMBER,
ERROR_DS_HAVE_PRIMARY_MEMBERS, ERROR_DS_SAM_NEED_BOOTKEY_PASSWORD,
ERROR_DS_SAM_NEED_BOOTKEY_FLOPPY, ERROR_DS_CANT_START,
ERROR_DS_INIT_FAILURE, ERROR_SAM_INIT_FAILURE, ERROR_DS_GC_REQUIRED,
ERROR_DS_LOCAL_MEMBER_OF_LOCAL_ONLY,
ERROR_DS_NO_FPO_IN_UNIVERSAL_GROUPS,
ERROR_DS_MACHINE_ACCOUNT_QUOTA_EXCEEDED):
Add missing error codes.
|
|
* common.h (EM_IQ2000): Define.
* iq2000.h: New file.
|
|
needed.
* dtable.cc (dtable::vfork_parent_restore): Remove assertion.
* pipe.cc (fhandler_pipe::close): Don't close read_state during fork_fixup
since it wasn't inherited.
|
|
_winminor): Declare as direct imports from dll if
__DECLSPEC_SUPPORTED.
|
|
asm code.
(GetFiberData): Likewise.
|
|
in asm code.
(GetFiberData): Likewise.
|
|
* Makefile.in (DESTDIR): New.
(install-info): Use it.
|
|
2003-01-02 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c: Update copyright years to include 2003.
(mips_ip): Fix indentation of "+A", "+B", and "+C" handling.
Additionally, clean up their code slightly and clean up their
comments some more.
* doc/c-mips.texi: Add MIPS32r2 to ".set mipsN" documentation.
[ gas/testsuite/ChangeLog ]
2003-01-02 Chris Demetriou <cgd@broadcom.com>
* gas/mips/elf_arch_mips32r2.d: Fix file description comment.
[ include/opcode/ChangeLog ]
2003-01-02 Chris Demetriou <cgd@broadcom.com>
* mips.h: Update copyright years to include 2002 (which had
been missed previously) and 2003. Make comments about "+A",
"+B", and "+C" operand types more descriptive.
|
|
ERROR_EXE_MACHINE_TYPE_MISMATCH, ERROR_HOOK_TYPE_NOT_ALLOWED,
ERROR_INVALID_KEYBOARD_HANDLE, ERROR_INVALID_PRINT_MONITOR,
ERROR_PRINT_MONITOR_IN_USE, ERROR_PRINTER_HAS_JOBS_QUEUED,
ERROR_REQUIRES_INTERACTIVE_WINDOWSTATION,
ERROR_SUCCESS_REBOOT_REQUIRED, ERROR_SUCCESS_RESTART_REQUIRED,
ERROR_TIMEOUT, OR_INVALID_OID, OR_INVALID_OXID,
OR_INVALID_SET, RPC_X_INVALID_PIPE_OPERATION): Add missing
error codes.
Re-sort codes..
|
|
Reported by: Mat Nieuwenhoven <matnieuw@users.sourceforge.net>
|
|
|
|
|
|
_SC_LOGIN_NAME_MAX, _SC_GETPW_R_SIZE_MAX.
* passwd.cc (getpwuid_r32): Add uid/gid fields to size check calculation.
|
|
* pseudo-reloc.c (do_pseudo_reloc): Make static.
* pseudo-reloc-list.c: New file.
* crt1.c (_pei386_runtime_relocator): Declare.
(__mingw_CRTStartup): Call it.
* dllcrt1.c (_pei386_runtime_relocator): Declare.
(DllMainCRTStartup): Call it.
* Makefile.in: Add pseudo-reloc.o pseude-reloc-list.o to
libmingw32.a.
2003-01-01 Egor Duda <deo@logos-m.ru>
* pseudo-reloc.c: New file.
|
|
* Makefile.def (target_modules) [libffi]: Allow installation.
|
|
* configure: Regenerated.
|
|
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (validate_mips_insn, mips_ip): Recognize
the "+D" operand, which will be used only by the disassembler.
[ gas/testsuite/ChangeLog ]
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* gas/mips/cp0sel-names-mips32.d: New test.
* gas/mips/cp0sel-names-mips32r2.d: New test.
* gas/mips/cp0sel-names-mips64.d: New test.
* gas/mips/cp0sel-names-numeric.d: New test.
* gas/mips/cp0sel-names-sb1.d: New test.
* gas/mips/cp0sel-names.s: New test source file.
* gas/mips/mips.exp: Run new tests.
[ include/opcode/ChangeLog ]
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* mips.h: Note that the "+D" operand type name is now used.
[ opcodes/ChangeLog ]
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_cp0sel_name): New structure.
(mips_cp0sel_names_mips3264, mips_cp0sel_names_mips3264r2)
(mips_cp0sel_names_sb1): New arrays.
(mips_arch_choice): New structure members "cp0sel_names" and
"cp0sel_names_len".
(mips_arch_choices): Add references to new cp0sel_names arrays
as appropriate, and make all existing entries reference
appropriate mips_XXX_names_numeric arrays rather than simply
using NULL.
(mips_cp0sel_names, mips_cp0sel_names_len): New variables.
(lookup_mips_cp0sel_name): New function.
(set_default_mips_dis_options): Set mips_cp0sel_names and
mips_cp0sel_names_len as appropriate. Remove now-unnecessary
checks for NULL register name arrays.
(parse_mips_dis_option): Likewise.
(print_insn_arg): Handle "+D" operand type.
* mips-opc.c (mips_builtin_opcodes): Add new "+D" variants
of mfc0, mtc0, dmfc0, and dmtc0 to print CP0+sel register
names symbolically.
|
|
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* aoutx.h (NAME(aout,machine_type)): Add bfd_mach_mipsisa32r2 case.
* archures.c (bfd_mach_mipsisa32r2): New define.
* bfd-in2.h: Regenerate.
* cpu-mips.c (I_mipsisa32r2): New enum value.
(arch_info_struct): Add entry for I_mipsisa32r2.
* elfxx-mips.c (elf_mips_isa, _bfd_elf_mips_mach)
(_bfd_mips_elf_print_private_bfd_data): Handle E_MIPS_ARCH_32R2.
(_bfd_mips_elf_final_write_processing): Add
bfd_mach_mipsisa32r2 case.
(_bfd_mips_elf_merge_private_bfd_data): Handle merging of
binaries marked as using MIPS32 Release 2.
[ binutils/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* doc/binutils.texi (objdump): Note MIPS HWR (Hardware Register)
changes in MIPS -M options.
[ gas/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* configure.in: Recognize mipsisa32r2, mipsisa32r2el, and
CPU variants.
* configure: Regenerate.
* config/tc-mips.c (ISA_HAS_DROR, ISA_HAS_ROR): New defines.
(macro_build): Handle "K" operand.
(macro2): Use ISA_HAS_DROR and ISA_HAS_ROR in the places where
CPU_HAS_DROR and CPU_HAS_ROR are currently used.
(mips_ip): New variable "lastpos", and implement "+A", "+B",
and "+C" operands for MIPS32 Release 2 ins/ext instructions.
Implement "K" operand for MIPS32 Release 2 rdhwr instruction.
(validate_mips_insn): Implement "+" as a way to extend the
allowed operands, and implement "K", "+A", "+B", and "+C"
operands.
(OPTION_MIPS32R2): New define.
(md_longopts): Add entry for OPTION_MIPS32R2.
(OPTION_ELF_BASE): Adjust to accomodate OPTIONS_MIPS32R2.
(md_parse_option): Handle OPTION_MIPS32R2.
(s_mipsset): Reimplement handling of ".set mipsN" options
and add support for ".set mips32r2".
(mips_cpu_info_table): Add entry for "mips32r2" (MIPS32 Release 2).
(md_show_usage): Document "-mips32r2" option.
* doc/as.texinfo: Document "-mips32r2" option.
* doc/c-mips.texi: Likewise.
[ gas/testsuite/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* gas/mips/cp0-names-mips32r2.d: New test.
* gas/mips/hwr-names-mips32r2.d: New test.
* gas/mips/hwr-names-numeric.d: New test.
* gas/mips/hwr-names.s: New test source file.
* gas/mips/mips32r2.d: New test.
* gas/mips/mips32r2.s: New test source file.
* gas/mips/mips32r2-ill.l: New test.
* gas/mips/mips32r2-ill.s: New test source file.
* gas/mips/mips.exp: Add mips32r2 architecture data array
entry. Run new tests mentioned above.
[ include/elf/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips.h (E_MIPS_ARCH_32R2): New define.
[ include/opcode/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips.h: Document "+" as the start of two-character operand
type names, and add new "K", "+A", "+B", and "+C" operand types.
(OP_MASK_INSMSB, OP_SH_INSMSB, OP_MASK_EXTMSB)
(OP_SH_EXTMSB, INSN_ISA32R2, ISA_MIPS32R2, CPU_MIPS32R2): New
defines.
[ opcodes/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_cp0_names_mips3264r2, mips_hwr_names_numeric)
(mips_hwr_names_mips3264r2): New arrays.
(mips_arch_choice): New "hwr_names" member.
(mips_arch_choices): Adjust for structure change, and add a new
entry for "mips32r2" ISA.
(mips_hwr_names): New variable.
(set_default_mips_dis_options): Set mips_hwr_names.
(parse_mips_dis_option): New "hwr-names" option which sets
mips_hwr_names, and adjust "reg-names=ARCH" to set mips_hwr_names.
(print_insn_arg): Change return type to "int"
and use that to indicate number of characters consumed.
Add support for "+" operand extension character, "+A", "+B",
"+C", and "K" operands.
(print_insn_mips): Adjust for changes to print_insn_arg.
(print_mips_disassembler_options): Adjust for "hwr-names"
addition and "reg-names" change.
* mips-opc (I33): New define (shorthand for INSN_ISA32R2).
(mips_builtin_opcodes): Note that "nop" and "ssnop" are special
forms of "sll". Add new MIPS32 Release 2 instructions: ehb,
di, ei, ext, ins, jr.hb, jalr.hb, mfhc1, mfhc2, mthc1, mthc2,
rdhwr, rdpgpr, seb, seh, synci, wrpgpr, wsbh.
Note that hardware rotate instructions (ror, rorv) can be
used on MIPS32 Release 2, and add the official mnemonics
for them (rotr, rotrv) and the similar "rotl" mnemonic for
left-rotate.
|
|
* configure: Regenerated.
|
|
|
|
|
|
|
|
|
|
* include/winbase.h (NMPWAIT_WAIT_FOREVER): Cast to DWORD.
* lib/ntdll.def (NtConnectPort, NtOpenEvent,
NtRequestWaitReplyPort, NtWaitForSingleObject,ZwConnectPort,
ZwOpenEvent, ZwRequestWaitReplyPort, ZwWaitForSingleObject):
Add stubs.
|
|
prototype. Thanks to: Joe Krahn <jkrahn at nc dot rr dot com>.
ChangeLog: Remove some whitespace.
|
|
(multilib.ts): ... this. Moved into...
(multilib.out): ... this. Don't use sub-make.
($(BUILD_SUBDIR)/[+module+]/Makefile, [+module+]/Makefile,
$(TARGET_SUBDIR)/[+module+]/Makefile, gcc/Makefile): Moved into...
(configure-build-[+module+], configure-[+module+],
configure-target-[+module+], configure-gcc): ... these. Test
for Makefile existence. Drop config.status from dependencies.
* Makefile.in: Rebuilt.
* configure.in: Move gcc-version-trigger to the end of
ac_configure_args. Add comments to maybedep.tmp and
serdep.tmp. Introduce --disable-serial-configure. Remove
nonopt from baseargs, matching and removing corresponding
whitespace while at it.
* configure: Rebuilt.
|
|
defining getopt directly.
|
|
no-longer-defined buildopts with --build=${build_alias}.
* configure: Rebuilt.
|
|
(NCN_STRICT_CHECK_TOOL): If program is not found and
value-if-not-found is empty, use ${ncn_tool_prefix}$2 or $2,
depending on whether build != host or not.
(NCN_STRICT_CHECK_TARGET_TOOL): Ditto, with the target prefix.
|
|
program_transform_name to standard idiom.
(AUTOGEN, AUTOCONF): Define.
(Makefile.in): Use $(AUTOGEN).
(Makefile): Depend on config.status, and use autoconf-style rule to
build it. Move original commands to...
(config.status): ... this new target.
(configure): Add $(srcdir). Depend on config/acx.m4. Use
$(AUTOCONF).
* Makefile.in: Rebuilt.
|
|
program_transform_name.
* Makefile.in: Regenerate.
* configure.in: Remove unnecessary PATH setting.
* configure: Regnerate.
* configure.in: Don't default to unprefixed tools unless
the native tools will work.
* configure: Regenerate.
|
|
|
|
* devices.h: New file.
* devices.gperf: Ditto.
|
|
|
|
* configure.in: Convert to autoconf script. Blow away lots
of now-redundant Makefile fragments.
* configure: Generate using Autoconf.
* Makefile.tpl: Rewrite to reflect autoconfiscation.
* Makefile.in: Regenerate.
(config)
* acx.m4: New.
* mh-a68bsd, mh-aix386, mh-apollo68, mh-delta88, mh-hp300,
mh-hpux, mh-hpux8, mh-irix5, mh-irix6, mh-ncrsvr43, mh-openedition,
mh-riscos, mh-sysv: Delete.
* mh-cxux, mh-dgux386, mh-interix, mh-lynxrs6k, mh-ncr3000,
mh-necv4, mh-sco, mh-solaris, mh-sysv4, mh-sysv5, mt-v810: Simplify.
|
|
is accepted or suffer a "race".
|
|
CXX_FOR_TARGET, GCJ_FOR_TARGET substituted in configure.in only.
* ChangeLog: Move a couple of entries from here to winsup/cygwin,
where they belong.
|
|
|
|
2002-12-27 Chris Demetriou <cgd@broadcom.com>
* doc/binutils.texi (objdump): Document MIPS -M options.
[ gas/testsuite/ChangeLog ]
2002-12-27 Chris Demetriou <cgd@broadcom.com>
* gas/mips/cp0-names-mips32.d: New file.
* gas/mips/cp0-names-mips64.d: New file.
* gas/mips/cp0-names-numeric.d: New file.
* gas/mips/cp0-names-sb1.d: New file.
* gas/mips/cp0-names.s: New file.
* gas/mips/fpr-names-32.d: New file.
* gas/mips/fpr-names-64.d: New file.
* gas/mips/fpr-names-n32.d: New file.
* gas/mips/fpr-names-numeric.d: New file.
* gas/mips/fpr-names.s: New file.
* gas/mips/gpr-names-32.d: New file.
* gas/mips/gpr-names-64.d: New file.
* gas/mips/gpr-names-n32.d: New file.
* gas/mips/gpr-names-numeric.d: New file.
* gas/mips/gpr-names.s: New file.
* gas/mips/mips.exp: Run new tests.
[ include/ChangeLog ]
2002-12-27 Chris Demetriou <cgd@broadcom.com>
* dis-asm.h (print_mips_disassembler_options): Prototype.
[ include/opcode/ChangeLog ]
2002-12-19 Chris Demetriou <cgd@broadcom.com>
* mips.h (OP_OP_COP0, OP_OP_COP1, OP_OP_COP2, OP_OP_COP3)
(OP_OP_LWC1, OP_OP_LWC2, OP_OP_LWC3, OP_OP_LDC1, OP_OP_LDC2)
(OP_OP_LDC3, OP_OP_SWC1, OP_OP_SWC2, OP_OP_SWC3, OP_OP_SDC1)
(OP_OP_SDC2, OP_OP_SDC3): Define.
[ opcodes/ChangeLog ]
2002-12-27 Chris Demetriou <cgd@broadcom.com>
* disassemble.c (disassembler_usage): Add invocation of
print_mips_disassembler_options.
* mips-dis.c (print_mips_disassembler_options)
(set_default_mips_dis_options, parse_mips_dis_option)
(parse_mips_dis_options, choose_abi_by_name, choose_arch_by_name)
(choose_arch_by_number): New functions.
(mips_abi_choice, mips_arch_choice): New structures.
(mips32_reg_names, mips64_reg_names, reg_names): Remove.
(mips_gpr_names_numeric, mips_gpr_names_oldabi)
(mips_gpr_names_newabi, mips_fpr_names_numeric)
(mips_fpr_names_32, mips_fpr_names_n32, mips_fpr_names_64)
(mips_cp0_names_numeric, mips_cp0_names_mips3264)
(mips_cp0_names_sb1, mips_abi_choices, mips_arch_choices)
(mips_processor, mips_isa, mips_gpr_names, mips_fpr_names)
(mips_cp0_names): New variables.
(print_insn_args): Use new variables to print GPR, FPR, and CP0
register names.
(mips_isa_type): Remove.
(print_insn_mips): Remove ISA and CPU setup since it is now done...
(_print_insn_mips): Here. Remove register setup code, and
call set_default_mips_dis_options and parse_mips_dis_options
instead.
(print_mips16_insn_arg): Use mips_gpr_names instead of mips32_names.
|
|
* fhandler_console.cc (fhandler_console::send_winch_maybe): If appropriate,
call tty master function to handle screen size change.
* fhandler_tty.cc (fhandler_tty_master::set_winsize): New function.
(fhandler_tty_master::init): Call set_winsize to set initial screen size.
|
|
of console in which tty is operating.
(process_input): Semi-revert previous change. Need to just use current
terminfo settings since this function is running in a thread, blocked when the
terminfo changes.
|
|
|