Age | Commit message (Collapse) | Author |
|
Sync with gcc:
2006-12-19 Paolo Bonzini <bonzini@gnu.org>
* configure.in: Remove "$build" case for powerpc-*-darwin* since
it only affects bootstrap and could be tested on "$host" as well.
* configure: Regenerate.
* config/mh-ppc-darwin: Add to the stage1 cflags here.
2006-12-19 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/29544
* Makefile.def (flags_to_pass): Add STAGE1_CHECKING.
(bootstrap_stage): Add STAGE1_CHECKING to stage1 configure flags,
move here comment from Makefile.tpl.
* Makefile.tpl: Move some definitions higher in the file.
(STAGE1_CHECKING): New.
* configure.in: Add --enable-stage1-checking.
* configure: Regenerate.
* Makefile.in: Regenerate.
2006-12-03 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* configure.in: Update error message for missing GMP/MPFR.
* configure: Regenerate.
2006-12-02 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* configure.in: Update MPFR version in error message.
* configure: Regenerate.
2006-11-26 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* configure.in (--with-mpfr-dir, --with-gmp-dir): Remove flags.
(--with-mpfr-include, --with-mpfr-lib, --with-gmp-include,
--with-gmp-lib): New flags.
* configure: Regenerate.
config:
2006-12-04 Eric Botcazou <ebotcazou@libertysurf.fr>
* tls.m4 (GCC_CHECK_TLS): Do not test TLS with static linking
if static linking doesn't even work.
|
|
* config/mt-spu: New file.
* Makefile.tpl (MAINT): Define
(MAINTAINER_MODE_FALSE, MAINTAINER_MODE_TRUE): Define.
* configure: Regenerate.
* Makefile.in: Regenerate.
|
|
* Makefile.tpl (clean-target-libgcc): Test for gcc Makefile presence.
(unstage): Test for stage_last presence.
PR bootstrap/29802
* Makefile.tpl (POSTSTAGE1_FLAGS_TO_PASS): Add HOST_SUBDIR in STAGE_PREFIX.
* Makefile.in: Regenerate.
|
|
* Makefile.in: Sync with GCC.
* configure.in: Sync with GCC (mpfr, gmp).
* configure: Sync with GCC.
|
|
* Makefile.def: Added pdf target handling.
* Makefile.tpl: Added pdf target handling.
* Makefile.in: Regenerated.
|
|
* Makefile.tpl (configure-stageN-MODULE): Pass --with-build-libsubdir
for stages after the first.
* Makefile.in: Regenerate.
config:
2006-07-19 Paolo Bonzini <bonzini@gnu.org>
* acx.m4: Support --with-build-libsubdir and AC_SUBST
build_libsubdir.
|
|
* Makefile.tpl (POSTSTAGE1_HOST_EXPORTS): Export CFLAGS and LDFLAGS
too.
* Makefile.in: Regenerate.
|
|
Sync from gcc:
2006-06-06 David Ayers <d.ayers@inode.at>
PR libobjc/13946
* Makefile.def: Add dependencies for libobjc which boehm-gc.
* Makefile.in: Regenerate.
* configure.in: Add --enable-objc-gc at toplevel and have it
enable boehm-gc for Objective-C.
Remove target-boehm-gc from libgcj.
Add target-boehm-gc to target_libraries.
Add target-boehm-gc to noconfigdirs where ${libgcj}
is specified.
Assert that boehm-gc is supported when requested for Objective-C.
Only build boehm-gc if needed either for Java or Objective-C.
* configure: Regenerate.
2006-06-05 Paolo Bonzini <bonzini@gnu.org>
PR 27674
* Makefile.tpl (configure-[+prefix+][+module+],
all-[+prefix+][+module+]): Depend on stage_current if bootstrapping.
Remove rule to unstage bootstrapped modules.
(stage_current): New.
* Makefile.in: Regenerate.
2006-05-20 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
Andreas Tobler <a.tobler@schweiz.ch>
* configure.in: Enable libgcj for hppa*-hp-hpux11*.
* configure: Rebuilt.
Revert
2006-01-31 Richard Guenther <rguenther@suse.de>
Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (target_modules): Add libgcc-math target module.
* configure.in (target_libraries): Add libgcc-math target library.
(--enable-libgcc-math): New configure switch.
* Makefile.in: Re-generate.
* configure: Re-generate.
|
|
* Makefile.def (bfd, opcodes): Fix lib_path.
* Makefile.tpl (POSTSTAGE1_FLAGS_TO_PASS): Replace ADAC with ADAFLAGS.
(restrap): Move under "@if gcc-bootstrap". Fix typo.
* Makefile.in: Regenerate.
|
|
* Makefile.tpl: Add install-html target.
* Makefile.def: Add install-html target.
* Makefile.in: Regenerate.
* configure.in: Add --with-datarootdir, --with-docdir,
and --with-htmldir options.
* configure: Regenerate.
bfd/
2006-04-06 Carlos O'Donell <carlos@codesourcery.com>
* po/Make-in: Add install-html target.
* Makefile.am: Rename docdir to bfddocdir. Add datarootdir, docdir
htmldir. Add install-html and install-html-recursive targets.
* Makefile.in: Regenerate.
* configure.in: AC_SUBST for datarootdir, docdir and htmldir.
* configure: Regenerate.
bfd/doc/
2006-04-06 Carlos O'Donell <carlos@codesourcery.com>
* Makefile.am: Add install-html and install-html-am targets.
Define datarootdir, docdir and htmldir.
* Makefile.in: Regenerate.
binutils/
2006-04-06 Carlos O'Donell <carlos@codesourcery.com>
* po/Make-in: Add install-html target.
* Makefile.am: Add install-html and install-html-recursive targets.
* Makefile.in: Regenerate.
* configure.in: AC_SUBST datarootdir, docdir and htmldir.
* configure: Regenerate.
* doc/Makefile.am: Add install-html and install-html-am targets.
* doc/Makefile.in: Regenerate.
etc/
2006-04-06 Carlos O'Donell <carlos@codesourcery.com>
* Makefile.in: Add install-html target. Add htmldir,
docdir and datarootdir.
* configure.texi: Document install-html target.
* configure.in: AC_SUBST datarootdir, docdir, htmldir.
* configure: Regenerate.
gas/
2006-04-06 Carlos O'Donell <carlos@codesourcery.com>
* po/Make-in: Add install-html target.
* Makefile.am: Add install-html and install-html-recursive targets.
* Makefile.in: Regenerate.
* configure.in: AC_SUBST datarootdir, docdir, htmldir.
* configure: Regenerate.
* doc/Makefile.am: Add install-html and install-html-am targets.
* doc/Makefile.in: Regenerate.
gprof/
2006-04-06 Carlos O'Donell <carlos@codesourcery.com>
* po/Make-in: Add install-html target.
* Makefile.am: Add install-html, install-html-am and
install-html-recursive targets.
* Makefile.in: Regenerate.
* configure.in: AC_SUBST datarootdir, docdir, htmldir.
* configure: Regenerate.
intl/
2006-04-06 Carlos O'Donell <carlos@codesourcery.com>
* intl/Makefile.in: Add html info and dvi and install-html to .PHONY
Add install-html target.
ld/
2006-04-06 Carlos O'Donell <carlos@codesourcery.com>
* Makefile.am: Add install-html, install-html-am, and
install-html-recursive targets.
* Makefile.in: Regenerate.
* configure.in: AC_SUBST datarootdir, docdir, htmldir.
* configure: Regenerate.
* po/Make-in: Add install-html target.
opcodes/
2006-04-06 Carlos O'Donell <carlos@codesourcery.com>
* Makefile.am: Add install-html target.
* Makefile.in: Regenerate.
|
|
Sync with gcc:
2006-03-10 Aldy Hernandez <aldyh@redhat.com>
* configure.in: Handle --disable-<component> generically.
* configure: Regenerate.
2006-02-21 Rafael Avila de Espindola <rafael.espindola@gmail.com>
* Makefile.tpl (BUILD_CONFIGDIRS): Remove.
(TARGET_CONFIGDIRS): Remove.
* configure.in: Remove AC_SUBST(target_configdirs).
* Makefile.in, configure: Regenerated.
|
|
PR bootstrap/25670
* Makefile.tpl ([+compare-target+]): Print explanation messages.
* Makefile.def (ADAFLAGS, BOOT_ADAFLAGS, LANGUAGES): New flags_to_pass.
* Makefile.tpl (BASE_FLAGS_TO_PASS): Support optional flags_to_pass.
(EXTRA_GCC_FLAGS): Remove ADAFLAGS, BOOT_ADAFLAGS, LANGUAGES,
BUILD_PREFIX, BUILD_PREFIX_1.
* configure.in: (BUILD_PREFIX, BUILD_PREFIX_1): Don't substitute.
* Makefile.def (bootstrap stage 1): Pass LIBCFLAGS too.
* Makefile.tpl (POSTSTAGE1_FLAGS_TO_PASS): Override LIBCFLAGS too.
* Makefile.tpl (configure-stage[+id+]-[+prefix+][+module+],
all-stage[+id+]-[+prefix+][+module+], : Use $(current_stage) instead
of `cat stage_current`. Always provide the `r' and `s' variables.
(clean-stage[+id+]-[+prefix+][+module+]): Likewise, and make it into
a single shell execution.
(configure-[+prefix+][+module+], all-[+prefix+][+module+]): For
bootstrapped modules, make the stage1 module if the build was not
started yet, else build the current stage.
(all-host, all-target): Omit bootstrapped modules (if bootstrapping).
(all-build, all-host, all-target, [+make_target+]-host,
[+make_target+]-target): Do not use \-continued lines.
(target modules): Depend on stage_last, not all-gcc, if bootstrapping.
(current_stage, restrap, stage_last): New.
* Makefile.in: Regenerate.
* configure: Regenerate.
|
|
@ from continuation.
* Makefile.in: Rebuilt.
|
|
Sync from gcc:
2006-01-04 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/24252
* Makefile.def (flags_to_pass): Add STAGE1_CFLAGS and STAGE1_LANGUAGES.
* Makefile.tpl (OBJDUMP): New.
(EXTRA_HOST_FLAGS): Add it.
(EXTRA_GCC_FLAGS): Remove flags already specified in flags_to_pass.
* Makefile.tpl (stage[+id+]-start, stage[+id+]-end): Do not try
to use symbolic links between directories. Avoid race conditions
or make them harmless.
* configure.in: Do not try to use symbolic links between directories.
* Makefile.def (LEAN): Pass.
* Makefile.tpl (LEAN): Define.
(stage[+id+]-start): Accept that the previous directory does not
exist, if the bootstrap is lean.
(stage[+id+]-bubble): Invoke lean bootstrap commands after
stage[+id+]-start. Use a makefile variable and an `if' instead of a
configure substitution.
([+compare-target+]): Likewise.
([+bootstrap-target+]-lean): New.
* configure.in: Remove lean bootstrap support from here.
* Makefile.in: Regenerate.
* configure: Regenerate.
2006-01-02 Andreas Schwab <schwab@suse.de>
* configure.in: When reconfiguring remove Makefile in
all stage directories.
* configure: Regenerate.
|
|
Revert Ada-related part of the previous change.
* Makefile.def (ADAFLAGS, BOOT_ADAFLAGS, ADAFLAGS_FOR_TARGET):
Do not pass.
* Makefile.tpl (BOOT_ADAFLAGS): Do not define.
* Makefile.in: Regenerate.
* configure.in: Do not include mt-ppc-aix target fragment.
* configure: Regenerate.
config:
2005-12-20 Paolo Bonzini <bonzini@gnu.org>
Revert Ada-related part of the previous change.
* mt-ppc-aix: Delete.
|
|
* configure.in: Select appropriate fragments for PowerPC/AIX.
* configure: Regenerate.
* Makefile.def (flags_to_pass): Add ADAFLAGS, BOOT_ADAFLAGS,
BOOT_CFLAGS, BOOT_LDFLAGS.
* Makefile.tpl (POSTSTAGE1_FLAGS_TO_PASS): Handle BOOT_ADAFLAGS,
BOOT_CFLAGS, BOOT_LDFLAGS.
(TARGET_FLAGS_TO_PASS): Handle ADAFLAGS_FOR_TARGET.
(stage[+id+]-bubble): Pass flags recursively to the comparison target.
(stage): Fail if we cannot complete the work.
config:
2005-12-19 Paolo Bonzini <bonzini@gnu.org>
* mt-ppc-aix, mh-ppc-aix: New.
|
|
* Makefile.tpl (all, do-[+make_target+], do-check, install,
install-host-nogcc): Don't invoke $(stage) at the end.
* Makefile.in: Regenerate.
|
|
* configure.in: Flip the top-level bootstrap switch.
* configure: Regenerate.
Merge from gcc:
2005-12-14 Daniel Jacobowitz <dan@codesourcery.com>
* Makefile.tpl: Throughout the file, use : $(MAKE) along with
$(stage) and $(unstage).
(EXTRA_TARGET_FLAGS): Correct double-quoting.
(all): Remove stray semicolon.
(local-distclean): Don't handle multilib.tmp and multilib.out.
(install.all): Set $s for consistency.
(configure-[+prefix+][+module+]): Instead of [+deps+], handle
check_multilibs setting. Always make the install directory.
(configure-stage[+id+]-[+prefix+][+module+]): Likewise.
Correct @if/@endif.
(all-stage[+id+]-[+prefix+][+module+]): Correct @if/@endif.
($(TARGET_SUBDIR)/[+module+]/multilib.out): Remove.
(stage[+id+]-start, stage[+id+]-end): Stage $(TARGET_SUBDIR).
(multilib.out): Remove.
* Makefile.in: Regenerated.
|
|
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
Sync with gcc:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4,
CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove
"CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below.
Find in-tree tools if available.
(EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them.
(CONFIGURED_*_FOR_TARGET): Don't set nor substitute.
(*_FOR_TARGET): Set them with GCC_TARGET_TOOL.
(COMPILER_*_FOR_TARGET): New.
* Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs.
(BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols.
(CONFIGURED_*, USUAL_*): Remove.
(BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO,
STRIP): Use autoconf substitutions.
(COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET,
COMPILER_NM_FOR_TARGET): New.
(EXTRA_HOST_FLAGS): Pass LIPO and STRIP.
(all): Make all-host and all-target in parallel.
(do-[+make_target+], do-check, install, [+compare-target+]): Ensure
that $$r and $$s are set before invoking a recursive make.
(stage[+id+]-bubble): Likewise, and invoke the comparison at the end.
([+bootstrap-target+]): Inline most of the `all' target.
2005-11-29 Ben Elliston <bje@au.ibm.com>
* Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc
from the gcc build directory.
* Makefile.in: Regenerate.
2005-11-29 Ben Elliston <bje@au.ibm.com>
* Makefile.def: Add new libdecnumber host_module. Make all-gcc
depend on all-libdecnumber.
* configure.in (host_libs): Include libdecnumber.
* Makefile.in: Regenerate.
* configure: Likewise.
2005-11-21 Kean Johnston <jkj@sco.com>
* config.sub, config.guess: Sync from upstream sources.
config:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (GCC_TARGET_TOOL): New.
|
|
* Makefile.tpl (CONFIGURE_GDB_TK, INSTALL_GDB_TK): New variables.
(configure-gdb, install-gdb): New rules.
* configure.in: Set CONFIGURE_GDB_TK and INSTALL_GDB_TK.
* Makefile.in, configure: Regenerated.
|
|
PR bootstrap/24297
* Makefile.tpl (do-[+make-target+], do-check, install,
stage[+id+]-bubble, [+compare-target+]): Ensure $$r and $$s
are set before recursing.
* Makefile.in: Regenerate.
|
|
* Makefile.tpl (BASE_TARGET_EXPORTS): Add OBJDUMP.
(OBJDUMP_FOR_TARGET, CONFIGURED_OBJDUMP_FOR_TARGET)
(USUAL_OBJDUMP_FOR_TARGET): New.
(EXTRA_TARGET_FLAGS): Add OBJDUMP.
* configure.in: Check for $OBJDUMP_FOR_TARGET.
* configure, Makefile: Regenerated.
|
|
* Makefile.tpl (all) [gcc-no-bootstrap]: Make prebootstrap packages
before other host packages.
|
|
PR bootstrap/22340
* configure.in (default_target): Remove.
* Makefile.tpl (all): Do not use prerequisites as subroutines
(all) [gcc-bootstrap]: Bootstrap gcc first if it was not done yet.
(do-[+make_target+], check, install, [+bootstrap_target+]): Do not
use prerequisites as subroutines.
(check-host, check-target): New.
(bootstrap configure & all targets): Do not use stage*-start
if the directory layout is already ok.
(non-bootstrap configure & all targets): Prepend a $(unstage).
(stage[+id+]-bubble): Do that here. Do not use NOTPARALLEL.
(NOTPARALLEL): Remove.
(unstage, stage variables): New variables.
(unstage, stage targets): Simply expand to those variables.
* configure: Regenerate.
* Makefile.in: Regenerate.
|
|
2005-09-28 Geoffrey Keating <geoffk@apple.com>
* Makefile.tpl (BASE_TARGET_EXPORTS): Add LIPO, STRIP.
(LIPO_FOR_TARGET): New.
(CONFIGURED_LIPO_FOR_TARGET): New.
(USUAL_LIPO_FOR_TARGET): New.
(STRIP_FOR_TARGET): New.
(CONFIGURED_STRIP_FOR_TARGET): New.
(USUAL_STRIP_FOR_TARGET): New.
* Makefile.def (flags_to_pass): Add LIPO_FOR_TARGET and
STRIP_FOR_TARGET.
* configure.in: Set LIPO_FOR_TARGET, STRIP_FOR_TARGET,
CONFIGURED_LIPO_FOR_TARGET, CONFIGURED_STRIP_FOR_TARGET.
* Makefile.in: Regenerate.
* configure.in: Regenerate.
Index: gcc/ChangeLog
2005-09-28 Geoffrey Keating <geoffk@apple.com>
* Makefile.in: Export LIPO_FOR_TARGET, STRIP_FOR_TARGET.
(stage1-start): Delete old libgcc and libunwind before moving
anything into the stage directory.
(stage2-start): Likewise.
(stage3-start): Likewise.
(stage4-start): Likewise.
(stageprofile-start): Likewise.
(stagefeedback-start): Likewise.
* config.gcc (*-*-darwin*): Automatically use CPU-specific darwin.h
header in tm_file and CPU-specific t-darwin in tmake_file.
(i[34567]86-*-darwin*): Don't change tm_file.
(powerpc-*-darwin*): Don't change tm_file or tmake_file.
* config/darwin.h (REAL_LIBGCC_SPEC): Rewrite to use proper libgcc
shared library stub for target OS version.
* config/t-slibgcc-darwin (SHLIB_SOLINK): Delete.
(SHLIB_LINK): Don't make SHLIB_SOLINK.
(SHLIB_INSTALL): Don't install SHLIB_SOLINK.
(libgcc_s.%.dylib): New.
(LIBGCC): Define.
(install-darwin-libgcc-stubs): New.
(INSTALL_LIBGCC): New append.
* config/i386/darwin-libgcc.10.4.ver: New.
* config/i386/darwin-libgcc.10.5.ver: New.
* config/i386/t-darwin: New.
* config/rs6000/darwin-libgcc.10.4.ver: New.
* config/rs6000/darwin-libgcc.10.5.ver: New.
* config/rs6000/darwin.h (REAL_LIBGCC_SPEC): Delete.
* config/rs6000/t-darwin (SHLIB_VERPFX): Define.
|
|
* Makefile.tpl: (USUAL_CC_FOR_TARGET): Add missing trailing slash.
* Makefile.in: Regenerate.
|
|
* configure.in (CC_FOR_TARGET, CXX_FOR_TARGET, GCJ_FOR_TARGET,
GCC_FOR_TARGET, RAW_CXX_FOR_TARGET, GFORTRAN_FOR_TARGET): Find
them with NCN_STRICT_CHECK_TARGET_TOOL, like the other target
tools; remove code to manually set them.
(Target tools): Look in the environment for them.
* Makefile.tpl (CC_FOR_TARGET, CXX_FOR_TARGET, GCJ_FOR_TARGET,
GCC_FOR_TARGET, RAW_CXX_FOR_TARGET, GFORTRAN_FOR_TARGET): Redefine.
(AS_FOR_TARGET, LD_FOR_TARGET, NM_FOR_TARGET): Look into gcc
build directory.
(CONFIGURED_CC_FOR_TARGET, CONFIGURED_CXX_FOR_TARGET,
CONFIGURED_GCJ_FOR_TARGET, CONFIGURED_GCC_FOR_TARGET,
CONFIGURED_GFORTRAN_FOR_TARGET, USUAL_CC_FOR_TARGET,
USUAL_CXX_FOR_TARGET, USUAL_GCJ_FOR_TARGET, USUAL_GCC_FOR_TARGET,
USUAL_RAW_CXX_FOR_TARGET, USUAL_GFORTRAN_FOR_TARGET): New.
(CXX_FOR_TARGET_FOR_RECURSIVE_MAKE,
RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE, RECURSE_FLAGS): Delete.
* configure: Regenerate.
* Makefile.in: Regenerate.
|
|
* Makefile.def (flags_to_pass): Add LDFLAGS_FOR_TARGET.
* Makefile.in: Regenerated.
|
|
* Makefile.tpl (SYSROOT_CFLAGS_FOR_TARGET): New variable.
(CFLAGS_FOR_TARGET): Use it.
(CXXFLAGS_FOR_TARGET): Likewise.
* Makefile.in: Regenerated.
* configure.in (--with-build-sysroot): New option.
* configure: Regenerated.
|
|
* Makefile.tpl: Wrap install between unstage and stage
* Makefile.in: Regenerate.
|
|
* all files: Update FSF address.
|
|
PR ada/22340
* Makefile.def: Sync with gcc.
* Makefile.tpl (POSTSTAGE1_FLAGS_TO_PASS): Fix pasto.
* Makefile.in: Regenerate.
|
|
* Makefile.tpl (EXTRA_GCC_FLAGS): Don't pass CFLAGS_FOR_BUILD here.
* Makefile.in: Regenerated.
|
|
* Makefile.def (stagefeedback): Come after profile.
Define profiledbootstrap target.
* Makefile.tpl (profiledbootstrap): Remove.
(stageprofile-end): Zap stagefeedback.
(stagefeedback-start): Copy all .gcda files, not only GCC's.
* Makefile.in: Regenerate.
|
|
* Makefile.tpl (stage[+id+]-start): Iterate over target module as well.
(Dependencies): Consider target modules for bootstrap dependencies.
Make target bootstrap modules depend on each stage's gcc.
* Makefile.in: Regenerate.
|
|
* Makefile.tpl (POSTSTAGE1_HOST_EXPORTS): Rename from
STAGE_HOST_EXPORTS.
(configure, all): Add bootstrap support.
(Host modules, target modules): Pass post-stage1 flags and exports.
(Top-level bootstrap): Remove bootstrap rules, expanded elsewhere.
* Makefile.in: Regenerate.
|
|
* Makefile.tpl (BUILD_CONFIGARGS): Include --with-build-subdir.
(TARGET_CONFIGARGS): Include --with-target-subdir.
(configure, all): New macros. Use them throughout.
|
|
* Makefile.tpl: Sync with gcc.
* Makefile.in: Regenerate.
|
|
* Makefile.def (bfd, opcodes, libstdc++-v3, libmudflap): Set lib_path.
* Makefile.tpl (SET_LIB_PATH, REALLY_SET_LIB_PATH): Remove.
(HOST_EXPORTS, STAGE_HOST_EXPORTS, TARGET_EXPORTS): Set $(RPATH_ENVVAR).
(HOST_LIB_PATH): Generate from Makefile.def.
(TARGET_LIB_PATH): Likewise.
(Old bootstrap targets): Include TARGET_LIB_PATH into RPATH_ENVVAR.
* Makefile.in: Regenerate.
* configure.in (set_lib_path, SET_LIB_PATH, SET_GCC_LIB_PATH): Remove.
(RPATH_ENVVAR): Include Darwin case.
* configure: Regenerate.
config:
2005-02-28 Paolo Bonzini <bonzini@gnu.org>
* config/gcc-lib-path.m4: Remove.
|
|
* Makefile.def: Remove libstdcxx_incdir, libsubdir, gxx_include_dir,
gcc_version, and gcc_version_trigger from set of flags to pass.
* Makefile.tpl: Remove definitions of above variables.
(config.status): Remove dependency on $(gcc_version_trigger).
* Makefile.in: Regenerate.
* configure.in: Do not reference config/gcc-version.m4 nor
config/gxx-include-dir.m4. Do not invoke TL_AC_GCC_VERSION nor
TL_AC_GXX_INCLUDE_DIR. Do not set gcc_version_trigger.
* configure: Regenerate.
config:
* gxx-include-dir.m4: In all substitutions, leave $(gcc_version)
to be expanded by the Makefile.
|
|
* Makefile.in: Regenerate.
|
|
PR bootstrap/20250
* Makefile.tpl (HOST target installs): Fix copy and pasto, use install
instead of check.
* Makefile.in: Regenerate.
|
|
Sync from gcc.
2005-02-28 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/17383
* Makefile.def (target_modules): Remove "stage", now unnecessary.
* Makefile.tpl (HOST_SUBDIR): New substitution.
(STAGE_HOST_EXPORTS, EXPECT, HOST_LIB_PATH, USUAL_AR_FOR_TARGET,
USUAL_AS_FOR_TARGET, USUAL_DLLTOOL_FOR_TARGET, USUAL_GCC_FOR_TARGET,
USUAL_LD_FOR_TARGET, USUAL_NM_FOR_TARGET, USUAL_OBJDUMP_FOR_TARGET,
USUAL_RANLIB_FOR_TARGET, USUAL_WINDRES_FOR_TARGET): Use it.
(Host modules, Bootstrapped modules): Use it.
(Build modules, Target modules): Do not create symlink trees,
always configure out-of-srcdir.
(distclean): Try removing $(host_subdir) with rm before using rm -rf.
* configure.in (FLAGS_FOR_TARGET, CC_FOR_TARGET, GCJ_FOR_TARGET,
GFORTRAN_FOR_TARGET, CXX_FOR_TARGET, RAW_CXX_FOR_TARGET): Use
$(HOST_SUBDIR). Create a symlink for host_subdir.
* Makefile.in: Regenerate.
* configure: Regenerate.
Merged from libada-gnattools-branch:
2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.def: Add gnattools as a module, depending on target-libada.
* Makefile.in: Regenerate.
* configure.in: Include gnattools in host_tools; disable it if ada
is disabled.
* configure: Regenerate.
config:
2005-02-28 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/17383
* acx.m4 (GCC_TOPLEV_SUBDIRS): Set HOST_SUBDIR if an in-src
gcc build is going.
|
|
PR bootstrap/18222
* Makefile.def: Pass CPPFLAGS_FOR_TARGET.
* Makefile.tpl: Define target CPPFLAGS on CPPFLAGS_FOR_TARGET.
* Makefile.in: Regenerate.
|
|
Revert 2004-12-28 Makefile changes, a better fix will be
applied to mainline and src after GCC 4.0 branches.
|
|
PR bootstrap/17383
* Makefile.def (target_modules): Remove stage parameter,
it is always true now.
* Makefile.tpl (configure-build-[+module+],
configure-target-[+module+]): Always build symlink tree
for the directory and for include. BUILD_SUBDIR and
TARGET_SUBDIR cannot be . anymore.
* Makefile.in: Regenerate.
|
|
|
|
* Makefile.tpl (EXTRA_HOST_FLAGS): Add PICFLAG.
(EXTRA_TARGET_FLAGS): Add PICFLAG.
* Makefile.in: Regenerate.
|
|
not bootstrapped.
* Makefile.in: Regenerate.
|
|
* Makefile.tpl (clean-target-libgcc): Add stmp-dirs to list of
things to remove.
* Makefile.in: Regenerate.
|