Age | Commit message (Collapse) | Author |
|
The current newlib multilib logic is almost exactly the same as the
config/multi.m4, and the differences should be minor, so switch over
to that to delete custom logic on ourside.
|
|
This was needed by ancient versions of automake, but that hasn't been
the case since at least automake-1.5, so punt this unused stub.
|
|
Now that we require a recent version of autoconf, we can rely on this
macro working. This change was already made to libm, but these other
dirs were missed as I didn't notice it being duplicated in 3 places.
|
|
Now that newlib.hin has been brought up to date and all of its defines
are produced by configure, we can switch it to using autoheader without
manual editing. This relies on a few pieces:
* Moving the header & footer into configure.ac via AH_TOP & AH_BOTTOM.
* Running a post-process step on newlib.h to delete all the defines we
didn't export ourselves. Basically, anything without a _ prefix.
This will leave behind some spurious comments in newlib.h related to
the defines we filtered out, but should be harmless, so it's probably
not worth the effort to construct a more complicated sed expression to
also strip those out.
|
|
The list of iconv to/from defines is hand maintained in newlib.hin.
Lets leverage mkdeps.pl to generate this list automatically from the
list of known encodings. The newlib.hin list is up-to-date, so the
list in iconv.m4 matches the list already generated.
|
|
This was added to configure, but never to the header file. Nothing
uses this currently, so it's not a big deal (as all the dynamic logic
is via automake conditionals), but might as well restore it now to
keep autoheader output in sync.
|
|
This will make it easier to move newlib.h to use autoheader directly.
We only want the newlib version defines in our hand curated version
file, _newlib_version.h, not in the template header, newlib.h, so
using AC_DEFINE doesn't make much sense.
|
|
Sort the symbols lexically like autoheader does. There are no other
changes in here. This will make it easier to sync with autoheader.
|
|
Sync these back from newlib.hin to configure.ac, and touchup some of
the forms to be consistent (like being full sentences). Also use the
AC_DEFINE-vs-AC_DEFINE_UNQUOTED macros correctly. This will make it
easier to re-enable autoheader for managing newlib.hin.
|
|
The acconfig.h header was used to run autoheader and then manually
sync the output into newlib.hin. Based on how the files have fallen
out of sync (with newlib.hin having many more templates), this has
not been run in a long time, and attempts to do so now would break
newlib.hin.
Further, if you try to run autoheader now, it will automatically
replace _newlib_version.hin since it's the first entry in the call
to AC_CONFIG_HEADERS.
So let's throw away acconfig.h entirely. It only had 2 slightly
better comments, and the rest were either worse, missing, or stale.
This has the side benefit of avoiding autoheader warning about the
deprecated use of acconfig.h since newer autoconf only wants macro
calls in configure.ac.
|
|
This define is only used by newlib internally, so stop exporting it
as HAVE_INITFINI_ARRAY since this can conflict with defines packages
use themselves.
We don't really need to add _ to HAVE_INIT_FINI too since it isn't
exported in newlib.h, but might as well be consistent here.
We can't (easily) add this to newlib_cflags like HAVE_INIT_FINI is
because this is based on a compile-time test in the top configure,
not on plain shell code in configure.host. We'd have to replicate
the test in every subdir in order to have it passed down.
|
|
Now that we require a recent version of autoconf, we can rely on this
macro working. We shift the call in configure.ac down a little to
help keep the generated diff minimal -- there should be no functional
difference otherwise. This is because the autoconf macros will call
a bunch of standard toolchain macros first, and arguably the current
code is incorrect in how it does its testing.
|
|
The current output doesn't happen to match what is produced on my
system, so force _iconv_ccs to be sorted like is already done in
the ccsbi.h header.
|
|
Some changes were made to aliasesbi.c, but not to this file which
dynamically generates it. Add those fixes to this file too.
|
|
As the file comments say, this was a backport of an autoconf-2.60 fix,
and shouldn't matter for >autoconf-2.59 versions. Drop it since we use
and require autoconf-2.69 now.
|
|
Currently this is only enabled in the top-level as that's the only
place where it seemed to be used. But the libc/sys/phoenix/ dir
also uses this functionality, but fails to explicitly enable it.
Automake workedaround it, but generated warnings. Move the option
to NEWLIB_CONFIGURE so all dirs get it automatically iff they end
up using the option. If they don't use the option, there's no
difference to the generated code.
|
|
Since AM_INIT_AUTOMAKE calls AC_PROG_AWK, and some configure.ac
scripts call it too, we end up testing for awk multiple times. If
we change NEWLIB_CONFIGURE to require the macro instead, then it
makes sure it's always expanded, but only once.
While we're here, do the same thing with AC_PROG_INSTALL since it
is also called by AM_INIT_AUTOMAKE, although it doesn't currently
result in duplicate configure checks.
|
|
The AC_LIBTOOL_WIN32_DLL macro has been deprecated for a while and code
should call LT_INIT with win32-dll instead. Update the calls to match.
The generated code is noisy not because of substantial differences, but
because the order of some macros change (i.e. instead of calling AS and
then CC, CC is called first and then AS).
|
|
Replace old AM_PROG_LIBTOOL name with LT_INIT. There's no change to
the generated files since they're aliases internally.
|
|
Since automake already sets per-library CCASFLAGS to $(AM_CCASFLAGS)
by default, there's no need to explicitly set it here.
Many of these dirs don't have .S files in the first place, so the rule
doesn't even do anything. That can easily be seen when Makefile.in has
no changes as a result.
For the dirs with .S files, the custom rules are the same as the pattern
.S.o rules, so this is a nice cleanup.
The only dir that was adding extra flags (newlib/libc/machine/mn10300/)
to the per-library setting can have it moved to the global AM_CCASFLAGS
since the subdir only has one target. Although the setting just adds
extra debugging flags, so maybe it should be deleted in general.
There are a few dirs that we leave the redundant setting in place. This
is to workaround an automake limitation in subdirs that support building
with & w/out libtool:
https://www.gnu.org/software/automake/manual/html_node/Objects-created-both-with-libtool-and-without.html
|
|
This matches what the other GNU toolchain projects have done already.
The generated diff in practice isn't terribly large. This will allow
more use of subdir local.mk includes due to fixes & improvements that
came after the 1.11 release series.
|
|
The newlib & libgloss dirs are already generated using autoconf-2.69.
To avoid merging new code and/or accidental regeneration using diff
versions, leverage config/override.m4 to pin to 2.69 exactly. This
matches what gcc/binutils/gdb are already doing.
The README file already says to use autoconf-2.69.
To accomplish this, it's just as simple as adding -I flags to the
top-level config/ dir when running aclocal. This is because the
override.m4 file overrides AC_INIT to first require the specific
autoconf version before calling the real AC_INIT.
|
|
Libtool needs to get BSD-format (or MS-format) output out of the system
nm, so that it can scan generated object files for symbol names for
-export-symbols-regex support. Some nms need specific flags to turn on
BSD-formatted output, so libtool checks for this in its AC_PATH_NM.
Unfortunately the code to do this has a pair of interlocking flaws:
- it runs the test by doing an nm of /dev/null. Some platforms
reasonably refuse to do an nm on a device file, but before now this
has only been worked around by assuming that the error message has a
specific textual form emitted by Tru64 nm, and that getting this
error means this is Tru64 nm and that nm -B would work to produce
BSD-format output, even though the test never actually got anything
but an error message out of nm -B. This is fixable by nm'ing *nm
itself* (since we necessarily have a path to it).
- the test is entirely skipped if NM is set in the environment, on the
grounds that the user has overridden the test: but the user cannot
reasonably be expected to know that libtool wants not only nm but
also flags forcing BSD-format output. Worse yet, one such "user" is
the top-level Cygnus configure script, which neither tests for
nor specifies any BSD-format flags. So platforms needing BSD-format
flags always fail to set them when run in a Cygnus tree, breaking
-export-symbols-regex on such platforms. Libtool also needs to
augment $LD on some platforms, but this is done unconditionally,
augmenting whatever the user specified: the nm check should do the
same.
One wrinkle: if the user has overridden $NM, a path might have been
provided: so we use the user-specified path if there was one, and
otherwise do the path search as usual. (If the nm specified doesn't
work, this might lead to a few extra pointless path searches -- but
the test is going to fail anyway, so that's not a problem.)
(Tested with NM unset, and set to nm, /usr/bin/nm, my-nm where my-nm is a
symlink to /usr/bin/nm on the PATH, and /not-on-the-path/my-nm where
*that* is a symlink to /usr/bin/nm.)
ChangeLog
2021-09-27 Nick Alcock <nick.alcock@oracle.com>
PR libctf/27967
* libtool.m4 (LT_PATH_NM): Try BSDization flags with a user-provided
NM, if there is one. Run nm on itself, not on /dev/null, to avoid
errors from nms that refuse to work on non-regular files. Remove
other workarounds for this problem. Strip out blank lines from the
nm output.
|
|
This reports common symbols like GNU nm, via a type code of 'C'.
ChangeLog
2021-09-27 Nick Alcock <nick.alcock@oracle.com>
PR libctf/27967
* libtool.m4 (lt_cv_sys_global_symbol_pipe): Augment symcode for
Solaris 11.
|
|
we have been grooming and maintaining for quite a few years over on git.haiku-os.org. All of these architectures are working and most have been stable for quite some time.
|
|
AR from older binutils doesn't work with --plugin and rc:
[hjl@gnu-cfl-2 bin]$ touch foo.c
[hjl@gnu-cfl-2 bin]$ ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c
[hjl@gnu-cfl-2 bin]$ ./ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c
./ar: no operation specified
[hjl@gnu-cfl-2 bin]$ ./ar --version
GNU ar (Linux/GNU Binutils) 2.29.51.0.1.20180112
Copyright (C) 2018 Free Software Foundation, Inc.
This program is free software; you may redistribute it under the terms of
the GNU General Public License version 3 or (at your option) any later version.
This program has absolutely no warranty.
[hjl@gnu-cfl-2 bin]$
Check if AR works with --plugin and rc before passing --plugin to AR and
RANLIB.
PR ld/27173
* configure: Regenerated.
* libtool.m4 (_LT_CMD_OLD_ARCHIVE): Check if AR works with
--plugin and rc before enabling --plugin.
config/
PR ld/27173
* gcc-plugin.m4 (GCC_PLUGIN_OPTION): Check if AR works with
--plugin and rc before enabling --plugin.
libiberty/
PR ld/27173
* configure: Regenerated.
zlib/
PR ld/27173
* configure: Regenerated.
|
|
Detect GCC LTO plugin. Pass --plugin to AR and RANLIB to support LTO
build.
* Makefile.tpl (AR): Add @AR_PLUGIN_OPTION@
(RANLIB): Add @RANLIB_PLUGIN_OPTION@.
* configure.ac: Include config/gcc-plugin.m4.
AC_SUBST AR_PLUGIN_OPTION and RANLIB_PLUGIN_OPTION.
* libtool.m4 (_LT_CMD_OLD_ARCHIVE): Pass --plugin to AR and
RANLIB if possible.
* Makefile.in: Regenerated.
* configure: Likewise.
config/
* gcc-plugin.m4 (GCC_PLUGIN_OPTION): New.
libiberty/
* Makefile.in (AR): Add @AR_PLUGIN_OPTION@
(RANLIB): Add @RANLIB_PLUGIN_OPTION@.
(configure_deps): Depend on ../config/gcc-plugin.m4.
* aclocal.m4: Include ../config/gcc-plugin.m4.
* configure.ac: AC_SUBST AR_PLUGIN_OPTION and
RANLIB_PLUGIN_OPTION.
* configure: Regenerated.
zlib/
* configure: Regenerated.
|
|
47a889a4ca20 ("Improve GNU/Hurd support.") fixed detection of shlibpath_overrides_runpath, thus avoiding unnecessary relink. This backports it.
. * libtool.m4: Match gnu* along other GNU systems.
*/ChangeLog:
* configure: Re-generate.
|
|
The configure scripts were regenerated with 2.69 for the newlib-4.2.0
release in 484d2ebf8d825b28af47b8ee88cd845f1d2c7c6e, but the aclocal
files were not. Do that now to avoid confusion between the two as to
which version of autoconf was used.
|
|
32 bit Cygwin still exports function calls to support old applications.
E. g., when switching from 16 to 32 bit uid/gid values, new function
like getuid32 have been added and the old getuid function still only
provides 16 bit values. Newly built applications using getuid are
actually calling getuid32.
However, this link magic isn't performed inside Cygwin itself, so if
newlib functions call getuid, they actually call the old getuid, not
the new getuid32. This leads to truncated uid/gid values.
https://cygwin.com/pipermail/cygwin/2022-January/250453.html reports
how this leads to problems in posix_spawn.
Fix this temporarily. i686 support will go away soon in Cygwin and the
fix can be dropped.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
|
|
For some RTEMS multilibs, the FPU and Altivec units are disabled during
interrupt handling. Do not save and restore the corresponding registers in
this case.
|
|
|
|
Newer automake warns that .texinfo extensions are discouraged in favor
of .texi, so rename the manuals to match.
|
|
|
|
A few subdirs have custom compile rules. Utilize AM_V_xxx settings
so they respect the silent build option.
|
|
Since automake deprecated the INCLUDES name in favor of AM_CPPFLAGS,
change all existing users over. The generated code is the same since
the two variables have been used in the same exact places by design.
There are other cleanups to be done, but lets focus on just renaming
here so we can upgrade to a newer automake version w/out triggering
new warnings.
|
|
A lot of the 3rd party code in the string library is around 20 years
old and has been worked on since.
I've updated the OpenBSD functions at least.
|
|
|
|
This is simply reflecting reality: all the subdirs in here are already
using automake-1.11.6, so making it a requirement will allow us to stop
suggesting we might support automake-1.9 or 1.10 (which I'm fairly sure
do not work today).
This is why only acinclude.m4 changes in this patch: the generated files
are exactly the same as the directives here are automake constraints,
not generated code logic.
|
|
|
|
The 'cygnus' option was removed from automake 1.13 in 2012, so the
presence of this option prevents that or a later version of automake
being used.
A check-list of the effects of '--cygnus' from the automake 1.12
documentation, and steps taken (where possible) to preserve those
effects (See also this thread [1] for discussion on that):
[1] https://lists.gnu.org/archive/html/bug-automake/2012-03/msg00048.html
1. The foreign strictness is implied.
Already present in AM_INIT_AUTOMAKE in newlib/acinclude.m4
2. The options no-installinfo, no-dependencies and no-dist are implied.
Already present in AM_INIT_AUTOMAKE in newlib/acinclude.m4
Future work: Remove no-dependencies and any explicit header dependencies,
and use automatic dependency tracking instead. Are there explicit rules
which are now redundant to removing no-installinfo and no-dist?
3. The macro AM_MAINTAINER_MODE is required.
Already present in newlib/acinclude.m4
Note that maintainer-mode is still disabled by default.
4. Info files are always created in the build directory, and not in the
source directory.
This appears to be an error in the automake documentation describing
'--cygnus' [2]. newlib's info files are generated in the source
directory, and no special steps are needed to keep doing that.
[2] https://lists.gnu.org/archive/html/bug-automake/2012-04/msg00028.html
5. texinfo.tex is not required if a Texinfo source file is specified.
(The assumption is that the file will be supplied, but in a place that
automake cannot find.)
This effect is overriden by an explicit setting of the TEXINFO_TEX
variable (the directory part of which is fed into texi2X via the
TEXINPUTS environment variable).
6. Certain tools will be searched for in the build tree as well as in the
user's PATH. These tools are runtest, expect, makeinfo and texi2dvi.
For obscure automake reasons, this effect of '--cygnus' is not active
for makeinfo in newlib's configury.
However, there appears to be top-level configury which selects in-tree
runtest, expect and makeinfo, if present. So, if that works as it
appears, this effect is preserved. If not, this may cause problem if
anyone is building those tools in-tree.
This effect is not preserved for texi2dvi. This may cause problems if
anyone is building texinfo in-tree.
If needed, explicit checks for those tools looking in places relative to
$(top_srcdir)/../ as well as in PATH could be added.
7. The check target doesn't depend on all.
This effect is not preseved. The check target now depends on the all
target.
This concern seems somewhat academic given the current state of the
testsuite.
Also note that this doesn't touch libgloss.
|
|
|
|
Add all the effects of 'cygnus' for which there exists an explicit way
to request that behaviour:
* Implied foreign strictness and options no-installinfo, no-dependencies
and no-dist are added to AM_INIT_AUTOMAKE in newlib/acinclude.m4.
* macro AM_MAINTAINER_MODE is added to newlib/acinclude.m4.
* For the implied TEXINFO_TEX of '$(top_srcdir)/../texinfo/texinfo.tex',
an explicit TEXINFO_TEX is always relative to $(srcdir), so write the
same pathname in that form.
This is to prepare for the removal of the automake option '--cygnus'.
|
|
These files were renamed from that long deprecated name in commit
92061799.
|
|
Regenerate all aclocal.m4, configure and Makefile.in files.
|
|
Use AM_SILENT_RULES, to enable automake silent rules (by default), if we
are using a version of automake which supports it (>=1.11).
Silent rules can be disabled by configuring with '--disable-silent-rules',
or invoking 'make V=1'.
For ease of reviewing, this patch doesn't contain configure and
Makefile.in regeneration.
Future work: There are a few compilations which are not silenced by
this, as they use custom rules.
|
|
- This patch uses gdtoa imported from OpenBSD if newlib configure
option "--enable-newlib-use-gdtoa=no" is NOT specified. gdtoa
provides more accurate output and faster conversion than legacy
ldtoa, while it requires more heap memory.
|
|
- Currently, frexpl() supports only the following cases.
1) LDBL_MANT_DIG == 64 or 113
2) 'long double' is equivalent to 'double'
This patch add support for LDBL_MANT_DIG == 53.
|
|
This patch fixed a problem which isn't in newlib, but in projects
incorrectly using symbols from the reserved namespace.
This reverts commit 3ba1bd0d9dbc015c14a0aaafcef042f706d1249a.
|
|
The code accessing the floating point control/status register, namely
#define __cfc1(__fcsr) __asm __volatile("cfc1 %0, $31" : "=r" (__fcsr)
does not compile with mips16. This changed the makefile to pass -mno-mips16 to avoid the following
compiler error:
mips-mti-elf fails with "Error: unrecognized opcode `cfc1 $3,$31'"
|