Update Add-ons class properties to annotations

This should take care of most of the class property conversions to
use the new annotation format (colon instead of equals) for
assignment. There may still be a few edge cases that were missed.

1 files changed, 31 insertions, 31 deletions

diff --git a/add_mesh_extra_objects/add_mesh_pipe_joint.py b/add_mesh_extra_objects/add_mesh_pipe_joint.py
index c0a995d8..0fe5d67b 100644
--- a/add_mesh_extra_objects/add_mesh_pipe_joint.py
+++ b/add_mesh_extra_objects/add_mesh_pipe_joint.py
@@ -94,7 +94,7 @@ class AddElbowJoint(Operator):
     bl_description = "Construct an elbow pipe mesh"
     bl_options = {'REGISTER', 'UNDO', 'PRESET'}
 
-    radius = FloatProperty(
+    radius: FloatProperty(
         name="Radius",
         description="The radius of the pipe",
         default=1.0,
@@ -102,12 +102,12 @@ class AddElbowJoint(Operator):
         max=100.0,
         unit="LENGTH"
         )
-    div = IntProperty(
+    div: IntProperty(
         name="Divisions",
         description="Number of vertices (divisions)",
         default=32, min=3, max=256
         )
-    angle = FloatProperty(
+    angle: FloatProperty(
         name="Angle",
         description="The angle of the branching pipe (i.e. the 'arm' - "
                     "Measured from the center line of the main pipe",
@@ -116,7 +116,7 @@ class AddElbowJoint(Operator):
         max=radians(179.9),
         unit="ROTATION"
         )
-    startLength = FloatProperty(
+    startLength: FloatProperty(
         name="Length Start",
         description="Length of the beginning of the pipe",
         default=3.0,
@@ -124,7 +124,7 @@ class AddElbowJoint(Operator):
         max=100.0,
         unit="LENGTH"
         )
-    endLength = FloatProperty(
+    endLength: FloatProperty(
         name="End Length",
         description="Length of the end of the pipe",
         default=3.0,
@@ -203,7 +203,7 @@ class AddTeeJoint(Operator):
     bl_description = "Construct a tee-joint pipe mesh"
     bl_options = {'REGISTER', 'UNDO', 'PRESET'}
 
-    radius = FloatProperty(
+    radius: FloatProperty(
         name="Radius",
         description="The radius of the pipe",
         default=1.0,
@@ -211,14 +211,14 @@ class AddTeeJoint(Operator):
         max=100.0,
         unit="LENGTH"
         )
-    div = IntProperty(
+    div: IntProperty(
         name="Divisions",
         description="Number of vertices (divisions)",
         default=32,
         min=4,
         max=256
         )
-    angle = FloatProperty(
+    angle: FloatProperty(
         name="Angle",
         description="The angle of the branching pipe (i.e. the 'arm' - "
                     "Measured from the center line of the main pipe",
@@ -227,7 +227,7 @@ class AddTeeJoint(Operator):
         max=radians(179.9),
         unit="ROTATION"
         )
-    startLength = FloatProperty(
+    startLength: FloatProperty(
         name="Length Start",
         description="Length of the beginning of the"
                     " main pipe (the straight one)",
@@ -236,7 +236,7 @@ class AddTeeJoint(Operator):
         max=100.0,
         unit="LENGTH"
         )
-    endLength = FloatProperty(
+    endLength: FloatProperty(
         name="End Length",
         description="Length of the end of the"
                     " main pipe (the straight one)",
@@ -245,7 +245,7 @@ class AddTeeJoint(Operator):
         max=100.0,
         unit="LENGTH"
         )
-    branchLength = FloatProperty(
+    branchLength: FloatProperty(
         name="Arm Length",
         description="Length of the arm pipe (the bent one)",
         default=3.0,
@@ -385,7 +385,7 @@ class AddWyeJoint(Operator):
     bl_description = "Construct a wye-joint pipe mesh"
     bl_options = {'REGISTER', 'UNDO', 'PRESET'}
 
-    radius = FloatProperty(
+    radius: FloatProperty(
         name="Radius",
         description="The radius of the pipe",
         default=1.0,
@@ -393,14 +393,14 @@ class AddWyeJoint(Operator):
         max=100.0,
         unit="LENGTH"
         )
-    div = IntProperty(
+    div: IntProperty(
         name="Divisions",
         description="Number of vertices (divisions)",
         default=32,
         min=4,
         max=256
         )
-    angle1 = FloatProperty(
+    angle1: FloatProperty(
         name="Angle 1",
         description="The angle of the 1. branching pipe "
                     "(measured from the center line of the main pipe)",
@@ -409,7 +409,7 @@ class AddWyeJoint(Operator):
         max=radians(179.9),
         unit="ROTATION"
         )
-    angle2 = FloatProperty(
+    angle2: FloatProperty(
         name="Angle 2",
         description="The angle of the 2. branching pipe "
                     "(measured from the center line of the main pipe) ",
@@ -418,7 +418,7 @@ class AddWyeJoint(Operator):
         max=radians(179.9),
         unit="ROTATION"
         )
-    startLength = FloatProperty(
+    startLength: FloatProperty(
         name="Length Start",
         description="Length of the beginning of the"
                     " main pipe (the straight one)",
@@ -427,7 +427,7 @@ class AddWyeJoint(Operator):
         max=100.0,
         unit="LENGTH"
         )
-    branch1Length = FloatProperty(
+    branch1Length: FloatProperty(
         name="Length Arm 1",
         description="Length of the 1. arm",
         default=3.0,
@@ -435,7 +435,7 @@ class AddWyeJoint(Operator):
         max=100.0,
         unit="LENGTH"
         )
-    branch2Length = FloatProperty(
+    branch2Length: FloatProperty(
         name="Length Arm 2",
         description="Length of the 2. arm",
         default=3.0,
@@ -587,7 +587,7 @@ class AddCrossJoint(Operator):
     bl_description = "Construct a cross-joint pipe mesh"
     bl_options = {'REGISTER', 'UNDO', 'PRESET'}
 
-    radius = FloatProperty(
+    radius: FloatProperty(
         name="Radius",
         description="The radius of the pipe",
         default=1.0,
@@ -595,14 +595,14 @@ class AddCrossJoint(Operator):
         max=100.0,
         unit="LENGTH"
         )
-    div = IntProperty(
+    div: IntProperty(
         name="Divisions",
         description="Number of vertices (divisions)",
         default=32,
         min=4,
         max=256
         )
-    angle1 = FloatProperty(
+    angle1: FloatProperty(
         name="Angle 1",
         description="The angle of the 1. arm (from the main axis)",
         default=radians(90.0),
@@ -610,21 +610,21 @@ class AddCrossJoint(Operator):
         max=radians(179.9),
         unit="ROTATION"
         )
-    angle2 = FloatProperty(name="Angle 2",
+    angle2: FloatProperty(name="Angle 2",
         description="The angle of the 2. arm (from the main axis)",
         default=radians(90.0),
         min=radians(-179.9),
         max=radians(179.9),
         unit="ROTATION"
         )
-    angle3 = FloatProperty(name="Angle 3 (center)",
+    angle3: FloatProperty(name="Angle 3 (center)",
         description="The angle of the center arm (from the main axis)",
         default=radians(0.0),
         min=radians(-179.9),
         max=radians(179.9),
         unit="ROTATION"
         )
-    startLength = FloatProperty(
+    startLength: FloatProperty(
         name="Length Start",
         description="Length of the beginning of the "
                     "main pipe (the straight one)",
@@ -633,14 +633,14 @@ class AddCrossJoint(Operator):
         max=100.0,
         unit="LENGTH"
         )
-    branch1Length = FloatProperty(name="Length Arm 1",
+    branch1Length: FloatProperty(name="Length Arm 1",
         description="Length of the 1. arm",
         default=3.0,
         min=0.01,
         max=100.0,
         unit="LENGTH"
         )
-    branch2Length = FloatProperty(
+    branch2Length: FloatProperty(
         name="Length Arm 2",
         description="Length of the 2. arm",
         default=3.0,
@@ -648,7 +648,7 @@ class AddCrossJoint(Operator):
         max=100.0,
         unit="LENGTH"
         )
-    branch3Length = FloatProperty(
+    branch3Length: FloatProperty(
         name="Length Arm 3 (center)",
         description="Length of the center arm",
         default=3.0,
@@ -847,7 +847,7 @@ class AddNJoint(Operator):
     bl_description = "Construct a n-joint pipe mesh"
     bl_options = {'REGISTER', 'UNDO', 'PRESET'}
 
-    radius = FloatProperty(
+    radius: FloatProperty(
         name="Radius",
         description="The radius of the pipe",
         default=1.0,
@@ -855,21 +855,21 @@ class AddNJoint(Operator):
         max=100.0,
         unit="LENGTH"
         )
-    div = IntProperty(
+    div: IntProperty(
         name="Divisions",
         description="Number of vertices (divisions)",
         default=32,
         min=4,
         max=256
         )
-    number = IntProperty(
+    number: IntProperty(
         name="Arms / Joints",
         description="Number of joints / arms",
         default=5,
         min=2,
         max=99999
         )
-    length = FloatProperty(
+    length: FloatProperty(
         name="Length",
         description="Length of each joint / arm",
         default=3.0,