diff options
Diffstat (limited to 'mesh_extra_tools/mesh_edgetools.py')
| -rw-r--r-- | mesh_extra_tools/mesh_edgetools.py | 68 |
1 files changed, 34 insertions, 34 deletions
diff --git a/mesh_extra_tools/mesh_edgetools.py b/mesh_extra_tools/mesh_edgetools.py index cfd6c75e..08959e7b 100644 --- a/mesh_extra_tools/mesh_edgetools.py +++ b/mesh_extra_tools/mesh_edgetools.py @@ -654,17 +654,17 @@ class Extend(Operator): bl_description = "Extend the selected edges of vertex pairs" bl_options = {'REGISTER', 'UNDO'} - di1 = BoolProperty( + di1: BoolProperty( name="Forwards", description="Extend the edge forwards", default=True ) - di2 = BoolProperty( + di2: BoolProperty( name="Backwards", description="Extend the edge backwards", default=False ) - length = FloatProperty( + length: FloatProperty( name="Length", description="Length to extend the edge", min=0.0, max=1024.0, @@ -776,7 +776,7 @@ class Spline(Operator): bl_description = "Create a spline interplopation between two edges" bl_options = {'REGISTER', 'UNDO'} - alg = EnumProperty( + alg: EnumProperty( name="Spline Algorithm", items=[('Blender', "Blender", "Interpolation provided through mathutils.geometry"), ('Hermite', "C-Spline", "C-spline interpolation"), @@ -784,31 +784,31 @@ class Spline(Operator): ('B-Spline', "B-Spline", "B-Spline interpolation")], default='Bezier' ) - segments = IntProperty( + segments: IntProperty( name="Segments", description="Number of segments to use in the interpolation", min=2, max=4096, soft_max=1024, default=32 ) - flip1 = BoolProperty( + flip1: BoolProperty( name="Flip Edge", description="Flip the direction of the spline on Edge 1", default=False ) - flip2 = BoolProperty( + flip2: BoolProperty( name="Flip Edge", description="Flip the direction of the spline on Edge 2", default=False ) - ten1 = FloatProperty( + ten1: FloatProperty( name="Tension", description="Tension on Edge 1", min=-4096.0, max=4096.0, soft_min=-8.0, soft_max=8.0, default=1.0 ) - ten2 = FloatProperty( + ten2: FloatProperty( name="Tension", description="Tension on Edge 2", min=-4096.0, max=4096.0, @@ -947,50 +947,50 @@ class Ortho(Operator): bl_description = "Creates new edges within an angle from vertices of selected edges" bl_options = {'REGISTER', 'UNDO'} - vert1 = BoolProperty( + vert1: BoolProperty( name="Vertice 1", description="Enable edge creation for Vertice 1", default=True ) - vert2 = BoolProperty( + vert2: BoolProperty( name="Vertice 2", description="Enable edge creation for Vertice 2", default=True ) - vert3 = BoolProperty( + vert3: BoolProperty( name="Vertice 3", description="Enable edge creation for Vertice 3", default=True ) - vert4 = BoolProperty( + vert4: BoolProperty( name="Vertice 4", description="Enable edge creation for Vertice 4", default=True ) - pos = BoolProperty( + pos: BoolProperty( name="Positive", description="Enable creation of positive direction edges", default=True ) - neg = BoolProperty( + neg: BoolProperty( name="Negative", description="Enable creation of negative direction edges", default=True ) - angle = FloatProperty( + angle: FloatProperty( name="Angle", description="Define the angle off of the originating edge", min=0.0, max=180.0, default=90.0 ) - length = FloatProperty( + length: FloatProperty( name="Length", description="Length of created edges", min=0.0, max=1024.0, default=1.0 ) # For when only one edge is selected (Possible feature to be testd): - plane = EnumProperty( + plane: EnumProperty( name="Plane", items=[("XY", "X-Y Plane", "Use the X-Y plane as the plane of creation"), ("XZ", "X-Z Plane", "Use the X-Z plane as the plane of creation"), @@ -1146,7 +1146,7 @@ class Shaft(Operator): shaftType = 0 # For tracking if the user has changed selection: - last_edge = IntProperty( + last_edge: IntProperty( name="Last Edge", description="Tracks if user has changed selected edges", min=0, max=1, @@ -1154,36 +1154,36 @@ class Shaft(Operator): ) last_flip = False - edge = IntProperty( + edge: IntProperty( name="Edge", description="Edge to shaft around", min=0, max=1, default=0 ) - flip = BoolProperty( + flip: BoolProperty( name="Flip Second Edge", description="Flip the perceived direction of the second edge", default=False ) - radius = FloatProperty( + radius: FloatProperty( name="Radius", description="Shaft Radius", min=0.0, max=1024.0, default=1.0 ) - start = FloatProperty( + start: FloatProperty( name="Starting Angle", description="Angle to start the shaft at", min=-360.0, max=360.0, default=0.0 ) - finish = FloatProperty( + finish: FloatProperty( name="Ending Angle", description="Angle to end the shaft at", min=-360.0, max=360.0, default=360.0 ) - segments = IntProperty( + segments: IntProperty( name="Shaft Segments", description="Number of segments to use in the shaft", min=1, max=4096, @@ -1451,22 +1451,22 @@ class Slice(Operator): bl_description = "Cut edges at the plane defined by a selected face" bl_options = {'REGISTER', 'UNDO'} - make_copy = BoolProperty( + make_copy: BoolProperty( name="Make Copy", description="Make new vertices at intersection points instead of splitting the edge", default=False ) - rip = BoolProperty( + rip: BoolProperty( name="Rip", description="Split into two edges that DO NOT share an intersection vertex", default=True ) - pos = BoolProperty( + pos: BoolProperty( name="Positive", description="Remove the portion on the side of the face normal", default=False ) - neg = BoolProperty( + neg: BoolProperty( name="Negative", description="Remove the portion on the side opposite of the face normal", default=False @@ -1641,7 +1641,7 @@ class Project(Operator): "(Active is projected onto the rest)") bl_options = {'REGISTER', 'UNDO'} - make_copy = BoolProperty( + make_copy: BoolProperty( name="Make Copy", description="Make duplicates of the vertices instead of altering them", default=False @@ -1719,22 +1719,22 @@ class Project_End(Operator): "edges closest to a plane onto that plane") bl_options = {'REGISTER', 'UNDO'} - make_copy = BoolProperty( + make_copy: BoolProperty( name="Make Copy", description="Make a duplicate of the vertice instead of moving it", default=False ) - keep_length = BoolProperty( + keep_length: BoolProperty( name="Keep Edge Length", description="Maintain edge lengths", default=False ) - use_force = BoolProperty( + use_force: BoolProperty( name="Use opposite vertices", description="Force the usage of the vertices at the other end of the edge", default=False ) - use_normal = BoolProperty( + use_normal: BoolProperty( name="Project along normal", description="Use the plane's normal as the projection direction", default=False |