Age | Commit message (Collapse) | Author |
|
Rename, add comments, and use flag in the depsgraph to ensure the logic
matches.
Differential Revision: https://developer.blender.org/D15883
|
|
With the ultimate goal of simplifying drawing and evaluation,
this patch makes the following changes and removes code:
- Use `Mesh` instead of `DispList` for evaluated basis metaballs.
- Remove all `DispList` drawing code, which is now unused.
- Simplify code that converts evaluated metaballs to meshes.
- Store the evaluated mesh in the evaluated geometry set.
This has the following indirect benefits:
- Evaluated meshes from metaball objects can be used in geometry nodes.
- Renderers can ignore evaluated metaball objects completely
- Cycles rendering no longer has to convert to mesh from `DispList`.
- We get closer to removing `DispList` completely.
- Optimizations to mesh rendering will also apply to metaball objects.
The vertex normals on the evaluated mesh are technically invalid;
the regular calculation wouldn't reproduce them. Metaball objects
don't support modifiers though, so it shouldn't be a problem.
Eventually we can support per-vertex custom normals (T93551).
Differential Revision: https://developer.blender.org/D14593
|
|
|
|
Remove the "tag batch cache dirty" function specifically for object data,
since it isn't used. Ref D14593
|
|
After recent refactors to mesh normals (cfa53e0fbeed), they are no
longer stored in CustomData. A mechanism to compute them eagerly
should be implemented another way.
|
|
These lines were not used now because the handling of copy data has changed.
Assigning the `eval` data can produce unexpected result, especially since everywhere ID_RECALC_TRANSFORM is used, we also do a copy on write. That should take care of `ob->data` for the eval object.
|
|
The "PROP" in the name reflects its generic status, and removing
"LOOP" makes sense because it is no longer associated with just
mesh face corners. In general the goal is to remove extra semantic
meaning from the custom data types.
|
|
Also solves two warnings from the previous similar commit,
f688e3cc3130e70e77f0bb0. The change to the grease pencil
modifier is quite suspicious, but doesn't change the behavior,
which was already broken.
|
|
This commit renames enums related the "Curve" object type and ID type
to add `_LEGACY` to the end. The idea is to make our aspirations clearer
in the code and to avoid ambiguities between `CURVE` and `CURVES`.
Ref T95355
To summarize for the record, the plans are:
- In the short/medium term, replace the `Curve` object data type with
`Curves`
- In the longer term (no immediate plans), use a proper data block for
3D text and surfaces.
Differential Revision: https://developer.blender.org/D14114
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
|
|
Also some descriptive text into doc-strings.
|
|
Based on discussions from T95355 and T94193, the plan is to use
the name "Curves" to describe the data-block container for multiple
curves. Eventually this will replace the existing "Curve" data-block.
However, it will be a while before the curve data-block can be replaced
so in order to distinguish the two curve types in the UI, "Hair Curves"
will be used, but eventually changed back to "Curves".
This patch renames "hair-related" files, functions, types, and variable
names to this convention. A deep rename is preferred to keep code
consistent and to avoid any "hair" terminology from leaking, since the
new data-block is meant for all curve types, not just hair use cases.
The downside of this naming is that the difference between "Curve"
and "Curves" has become important. That was considered during
design discussons and deemed acceptable, especially given the
non-permanent nature of the somewhat common conflict.
Some points of interest:
- All DNA compatibility is lost, just like rBf59767ff9729.
- I renamed `ID_HA` to `ID_CV` so there is no complete mismatch.
- `hair_curves` is used where necessary to distinguish from the
existing "curves" plural.
- I didn't rename any of the cycles/rendering code function names,
since that is also used by the old hair particle system.
Differential Revision: https://developer.blender.org/D14007
|
|
Part of T91671.
Not much else to say, this is mainly a massive deletion of code.
Note that a few cleanups possible after this proxy removal were kept out
of this commit to try to reduce a bit its size.
Reviewed By: sergey, brecht
Maniphest Tasks: T91671
Differential Revision: https://developer.blender.org/D13995
|
|
The evaluated mesh is a result of evaluated modifiers, and referencing
other evaluated IDs such as materials.
It can not be stored in the EditMesh structure which is intended to be
re-used by many areas. Such sharing was causing ownership errors causing
bugs like
T93855: Cycles crash with edit mode and simultaneous viewport and final render
The proposed solution is to store the evaluated edit mesh and its cage in
the object's runtime field. The motivation goes as following:
- It allows to avoid ownership problems like the ones in the linked report.
- Object level is chosen over mesh level is because the evaluated mesh
is affected by modifiers, which are on the object level.
This patch allows to have modifier stack of an object which shares mesh with
an object which is in edit mode to be properly taken into account (before
the change the modifier stack from the active object will be used for all
objects which share the mesh).
There is a change in the way how copy-on-write is handled in the edit mode to
allow proper state update when changing active scene (or having two windows
with different scenes). Previously, the copt-on-write would have been ignored
by skipping tagging CoW component. Now it is ignored from within the CoW
operation callback. This allows to update edit pointers for objects which are
not from the current depsgraph and where the edit_mesh was never assigned in
the case when the depsgraph was evaluated prior the active depsgraph.
There is no user level changes changes expected with the CoW handling changes:
should not affect on neither performance, nor memory consumption.
Tested scenarios:
- Various modifiers configurations of objects sharing mesh and be part of the
same scene.
- Steps from the reports: T93855, T82952, T77359
This also fixes T76609, T72733 and perhaps other reports.
Differential Revision: https://developer.blender.org/D13824
|
|
As described in T91186, this commit moves mesh vertex normals into a
contiguous array of float vectors in a custom data layer, how face
normals are currently stored.
The main interface is documented in `BKE_mesh.h`. Vertex and face
normals are now calculated on-demand and cached, retrieved with an
"ensure" function. Since the logical state of a mesh is now "has
normals when necessary", they can be retrieved from a `const` mesh.
The goal is to use on-demand calculation for all derived data, but
leave room for eager calculation for performance purposes (modifier
evaluation is threaded, but viewport data generation is not).
**Benefits**
This moves us closer to a SoA approach rather than the current AoS
paradigm. Accessing a contiguous `float3` is much more efficient than
retrieving data from a larger struct. The memory requirements for
accessing only normals or vertex locations are smaller, and at the
cost of more memory usage for just normals, they now don't have to
be converted between float and short, which also simplifies code
In the future, the remaining items can be removed from `MVert`,
leaving only `float3`, which has similar benefits (see T93602).
Removing the combination of derived and original data makes it
conceptually simpler to only calculate normals when necessary.
This is especially important now that we have more opportunities
for temporary meshes in geometry nodes.
**Performance**
In addition to the theoretical future performance improvements by
making `MVert == float3`, I've done some basic performance testing
on this patch directly. The data is fairly rough, but it gives an idea
about where things stand generally.
- Mesh line primitive 4m Verts: 1.16x faster (36 -> 31 ms),
showing that accessing just `MVert` is now more efficient.
- Spring Splash Screen: 1.03-1.06 -> 1.06-1.11 FPS, a very slight
change that at least shows there is no regression.
- Sprite Fright Snail Smoosh: 3.30-3.40 -> 3.42-3.50 FPS, a small
but observable speedup.
- Set Position Node with Scaled Normal: 1.36x faster (53 -> 39 ms),
shows that using normals in geometry nodes is faster.
- Normal Calculation 1.6m Vert Cube: 1.19x faster (25 -> 21 ms),
shows that calculating normals is slightly faster now.
- File Size of 1.6m Vert Cube: 1.03x smaller (214.7 -> 208.4 MB),
Normals are not saved in files, which can help with large meshes.
As for memory usage, it may be slightly more in some cases, but
I didn't observe any difference in the production files I tested.
**Tests**
Some modifiers and cycles test results need to be updated with this
commit, for two reasons:
- The subdivision surface modifier is not responsible for calculating
normals anymore. In master, the modifier creates different normals
than the result of the `Mesh` normal calculation, so this is a bug
fix.
- There are small differences in the results of some modifiers that
use normals because they are not converted to and from `short`
anymore.
**Future improvements**
- Remove `ModifierTypeInfo::dependsOnNormals`. Code in each modifier
already retrieves normals if they are needed anyway.
- Copy normals as part of a better CoW system for attributes.
- Make more areas use lazy instead of eager normal calculation.
- Remove `BKE_mesh_normals_tag_dirty` in more places since that is
now the default state of a new mesh.
- Possibly apply a similar change to derived face corner normals.
Differential Revision: https://developer.blender.org/D12770
|
|
- Added space below non doc-string comments to make it clear
these aren't comments for the symbols directly below them.
- Use doxy sections for some headers.
- Minor improvements to doc-strings.
Ref T92709
|
|
There are two functions that recalculate the boundbox of an object:
- One that considers the evaluated geometry
- Another that only considers the object's `data`.
Most of the time, the bound box is calculated on the final object
(with modifiers), so it doesn't seem right to just rely on `ob->data`
to recalculate the `ob->runtime.bb`.
Be sure to calculate the BoundBox based on the final geometry and
only use `ob->data` as a fallback
Differential Revision: https://developer.blender.org/D12282
|
|
This reverts commits
bfa3dc91b75407b063f2ac991b176d98c050f92d,
52b94049f2a71a74f52247f83657cf3a5c8712b4,
ae379714e4f1eca74f5f77532a6e959f29445236,
a770faa811ee62837eb540b0bd83ca0770f16663,
4ed029fc02b022cb5ff28ed3ce70992c450d2be5,
101a493ab556c6597ac91fba204059be67b35990 and
62a2faa7ef39130446716d7a06215cd1df1eb2ac.
And fixes T89955.
Changing the dependency graph is a can of worms and the result is
a kind of unpredictable.
A different solution will be planned.
|
|
Falback is not really necessary, and causes
`BKE_object_data_batch_cache_dirty_tag` to run multithreaded in an
unsafe way.
No functional changes.
|
|
During a mesh transformation in edit mode (Move, Rotate...), only part of
the batch cache needs to be updated.
This commit allows only update only the drawn batches seen in
`BKE_object_data_eval_batch_cache_deform_tag` if the new
`ID_RECALC_GEOMETRY_DEFORM` flag is used.
This new flag is used in the transforms operation for edit-mesh and
results in 1.6x overall speedup in heavy subdiv cube.
Differential Revision: https://developer.blender.org/D11599
|
|
Confusingly, BKE_scene_frame_get did not match the frame number as expected by
BKE_scene_frame_set. Instead it return the value after time remapping, which
is commonly named "ctime".
* Rename BKE_scene_frame_get to BKE_scene_ctime_get
* Add a new BKE_scene_frame_get that matches BKE_scene_frame_set
* Use int/float depending if fractional frame is expected
|
|
`BKE_displist_make_curveTypes` had a `for_orco` argument that was
always false in calls to the function. Removing it allows the curve
displist and modifier evaluation code to become simpler. There are
some related cleanups in rBdf4299465279 and rB93aecd2b8107.
|
|
Create a more specialized function `BKE_object_data_batch_cache_dirty_tag`
|
|
In the past, custom attributes were rarely used in practice, because the
only way to use them was from Python. Since geometry nodes, more
users started to add their own attributes. Those attributes should not
be removed automatically. It is still possible to remove them in
geometry nodes explictly to improve performance.
|
|
|
|
This adds the LineArt grease pencil modifier.
It takes objects or collections as input and generates various grease
pencil lines from these objects with the help of the active scene
camera. For example it can generate contour lines, intersection lines
and crease lines to name a few.
This is really useful as artists can then use 3D meshes to automatically
generate grease pencil lines for characters, enviroments or other
visualization purposes.
These lines can then be baked and edited as regular grease pencil lines.
Reviewed By: Sebastian Parborg, Antonio Vazquez, Matias Mendiola
Differential Revision: http://developer.blender.org/D8758
|
|
When using grease pencil for drawing Storyboards, it's very common to require a transform of the layers. This transform can be done using the offset modifier, but in some cases, the scene requires a lot of modifiers and makes the file hard to work.
This new feature adds a transforms Location, Rotation and Scale at Layer level, and allows to transform the layer without using a modifier, keeping the scene more clean.
{F9480695}
This feature was suggested by @pepeland after receiving feedback from several artists.
Also, done some code cleanup and rename some functions to get a better naming.
Maniphest Tasks: T83660
Differential Revision: https://developer.blender.org/D9761
|
|
Root of the issue is that `BKE_object_eval_boundbox` (that ports back
evaluated bbox to orig object during active depsgraph evaluation) is
only called when object's geometry actually is evaluated.
However, with new undo, often Object itself can be changed by undo,
without requiring its geometry to be re-evaluated, which was leading to
the evaluated bbox not being copied back into orig object anymore.
Fixing that by moving bbox copying-to-orig code into
`BKE_object_sync_to_original` instead, which is always executed when
object is evaluated (as hinted by the comment above
`BKE_object_eval_boundbox` actually).
Also allows to cleanup code for armature eval, apparently.
Maniphest Tasks: T83422
Differential Revision: https://developer.blender.org/D9789
|
|
Remove DNA headers, using forward declarations where possible.
Also removed duplicate header, header including it's self
and unnecessary inclusion of libc system headers from BKE header.
|
|
Follow our code style guide by using C-comments for text descriptions.
|
|
This fixes T77559 Scale to zero in object mode unable to select
|
|
Sculpt Vertex Colors is a painting system that runs inside sculpt mode, reusing all its tools and optimizations. This provides much better performance, easier to maintain code and more advanced features (new brush engine, filters, symmetry options, masks and face sets compatibility...). This is also the initial step for future features like vertex painting in Multires and brushes that can sculpt and paint at the same time.
This commit includes:
- SCULPT_UNDO_COLOR for undo support in sculpt mode
- SCULPT_UPDATE_COLOR and PBVH flags and rendering
- Sculpt Color API functions
- Sculpt capability for sculpt tools (only enabled in the Paint Brush for now)
- Rendering support in workbench (default to Sculpt Vertex Colors except in Vertex Paint)
- Conversion operator between MPropCol (Sculpt Vertex Colors) and MLoopCol (Vertex Paint)
- Remesher reprojection in the Voxel Remehser
- Paint Brush and Smear Brush with color smoothing in alt-smooth mode
- Parameters for the new brush engine (density, opacity, flow, wet paint mixing, tip scale) implemented in Sculpt Vertex Colors
- Color Filter
- Color picker (uses S shortcut, replaces smooth)
- Color selector in the top bar
Reviewed By: brecht
Maniphest Tasks: T72866
Differential Revision: https://developer.blender.org/D5975
|
|
The `BKE_animsys.h` and `anim_sys.c` files already had a an "AnimData
API" section. The code in that section has now been split off, and
placed into `BKE_anim_data.h` and `anim_data.c`.
All files that used to include `BKE_animsys.h` have been adjusted to
only include the animation headers they need (sometimes none).
No functional changes.
|
|
This is a common, unambiguous abbreviation
already used throughout the code-base.
|
|
|
|
Only the volume object is exposed in the user interface. It is based on OpenVDB
internally. Drawing and rendering code will follow in another commit.
https://wiki.blender.org/wiki/Source/Objects/Volume
https://wiki.blender.org/wiki/Reference/Release_Notes/2.83/Volumes
Hair and PointCloud object types are hidden behind a WITH_NEW_OBJECT_TYPES
build option. These are unfinished, and included only to make it easier to
cooperate on development in the future and avoid tricky merges.
https://wiki.blender.org/wiki/Source/Objects/New_Object_Types
Ref T73201, T68981
Differential Revision: https://developer.blender.org/D6945
|
|
This commit is a full refactor of the grease pencil modules including Draw Engine, Modifiers, VFX, depsgraph update, improvements in operators and conversion of Sculpt and Weight paint tools to real brushes.
Also, a huge code cleanup has been done at all levels.
Thanks to @fclem for his work and yo @pepeland and @mendio for the testing and help in the development.
Differential Revision: https://developer.blender.org/D6293
|
|
This is in preparation of new object types. This only changes mesh_eval, we
may do the same for mesh_deform_eval and other areas in the future if there is
a need for it.
This previously caused a bug in T74283, that should be fixed now.
Differential Revision: https://developer.blender.org/D6695
|
|
than mesh"
This reverts commit f2b95b9eae2ee913c99cff7595527b18d8b49d0a.
Fix T74283: modifier display lost when moving object in edit mode.
The cause is not immediately obvious so better to revert and look at this
carefully.
|
|
This is in preparation of new object types. This only changes mesh_eval, we
may do the same for mesh_deform_eval and other areas in the future if there is
a need for it.
Differential Revision: https://developer.blender.org/D6695
|
|
Remove this pointer since it's linking Mesh data back to the object,
where a single edit-mesh may have multiple object users,
causing incorrect assumptions in the code.
Resolves dangling pointer part of the T72667 crash,
although there are other issues which still need to be fixed.
In EDBM_op_finish and EDBM_update_generic,
full Main lookups have been added which should be replaced with mesh
argument or the update tagging moved elsewhere.
|
|
Users now can turn on in a viewport collections that are temporarily
hidden (eye) in the view layer.
Design task: T61327
As for the implementation, I had to decouple the visibility in the
depsgraph from the visibility in the view layer.
Also there is a "bug" that in a way was there before which is some
operators (e.g., writing a text inside of a text object, tab into edit
mode) run regardless of the visibility of the active object. The bug was
present already (with object type visibility restriction) in 2.80 so if
we decide to tackle it, can be done separately (I have a patch for it
though P1132).
Reviewed by: brecht (thank you)
Differential Revision: D5992
|
|
Support per-viewport collection visibility options.
Note 1: There is no way to show a collection that was not visible before
due to depsgraph. Otherwise we would risk having all the collections in
the depsgraph and I believe this is not the idea.
An alternative would be to have a new depsgraph for viewports that are
not local. Something to keep in mind if we do per-viewport current frame
in the future.
So for now what we do is to only allow collections visibility to be
disabled/hidden in this mode.
Note 2: hide_viewport (the eye icon) doesn't really matter for
depsgraph. So after the merge we can still ignore it to show the
collections locally in a viewport with no problems for the depsgraph.
Reviewers: brecht, sergey
Subscribers: billreynish
Related task: T61327
Differential Revision: https://developer.blender.org/D5611
|
|
Before, the evaluation of modifers were done in draw manager. The reason of the old design was grease pencil was designed before depsgraph was in place.
This commit moves this logic to depsgraph to follow general design and reduce Draw Manager complexity. Also, this is required in order to use modifiers in Edit modes.
Really, there is nothing really new in the creation of derived data, only the logic has been moved to depsgraph, but the main logic is the same. In order to get a reference to the original stroke and points, a pointer is added to Runtime data as part of the evaluated data. These pointers allow to know and use the original data.
As the modifiers now are evaluated in Depsgraph, the evaluated stroke is usable in Edit modes, so now it's possible to work with the evaluated version instead to use a "ghost" of the final image over the original geometry as work today.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5470
|
|
|
|
|
|
Two issues here:
- Evaluated object data is to only be updated for selection only after modifier
stack is done its job. Otherwise it's possible to have selection batch update
called on an input data, at the same time as original object data is being
evaluated.
- If object's modifier stack did not create its own evaluated mesh (in case
when there is no effective modifiers, for example) can not update selection
on object's data, as it might cause threading issues between objects sharing
same data.
|
|
|
|
Always compute CD_ORCO undeformed coordinates now for rendering, same as before.
There is still a refresh issue to be fixed, when switching from solid to textured
mode in the viewport.
Computing such undeformed coordinates can be expensive and is not actually needed
if the mesh is only using e.g. UV maps. This was the same in 2.79, at least now we
are skipping the computation when there are no deforming mdifiers on the mesh.
|