Age | Commit message (Collapse) | Author |
|
The animated objects was not updated for each internal substep for the rigidbody sim.
This would lead to unstable simulations or very annoying clipping artifacts.
Updated the code to use explicit substeps and tie it to the scene frame rate.
Fix T47402: Properly updating the animated objects fixes the reported issue.
Reviewed By: Brecht, Jacques
Differential Revision: http://developer.blender.org/D8762
|
|
This is for design task T67744, Boolean Redesign.
It adds a choice of solver to the Boolean modifier and the
Intersect (Boolean) and Intersect (Knife) tools.
The 'Fast' choice is the current Bmesh boolean.
The new 'Exact' choice is a more advanced algorithm that supports
overlapping geometry and uses more robust calculations, but is
slower than the Fast choice.
The default with this commit is set to 'Exact'. We can decide before
the 2.91 release whether or not this is the right choice, but this
choice now will get us more testing and feedback on the new code.
|
|
|
|
It was impossible for drivers to use shape key properties, modifiers
generate a new mesh. After mesh evaluation the shape keys are no longer
necessary, and because of this the `key` pointer was not copied. As
drivers work on evaluated data, however, they do need this `key`
pointer.
This commit makes the `key` pointer available in evaluated meshes, but
this is somewhat dangerous. There was an explicit reason why the key on
result was kept at null pointer: to have the evaluated mesh in a
consistent state. Assigning this pointer makes it potentially
inconsistent, as the evaluated mesh and the original shape key may have
different topologies.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D7785
|
|
And make them part of the blender_test runner. The one exception is blenlib
performance tests, which we don't want to run by default. They remain in their
own executable.
Differential Revision: https://developer.blender.org/D8498
|
|
This matches edit-mesh region selection (Ctrl-Shift-Select).
|
|
|
|
This adds support for path selection for vertex edge & face selection
modes, matching mesh editing behavior, useful with the UV rip tool.
Region select & edge tagging are currently not supported,
although they could be added eventually.
|
|
|
|
|
|
This is a more correct fix to the issue Brecht was fixing in D6600.
While the fix in that patch worked fine for linking it broke ASAN
runtime under some circumstances.
For example, `make full debug developer` would compile, but trying
to start blender will cause assert failure in ASAN (related on check
that ASAN is not running already).
Top-level idea: leave it to CMake to keep track of dependency graph.
The root of the issue comes to the fact that target like "blender" is
configured to use a lot of static libraries coming from Blender sources
and to use external static libraries. There is nothing which ensures
order between blender's and external libraries. Only order of blender
libraries is guaranteed.
It was possible that due to a cycle or other circumstances some of
blender libraries would have been passed to linker after libraries
it uses, causing linker errors.
For example, this order will likely fail:
libbf_blenfont.a libfreetype6.a libbf_blenfont.a
This change makes it so blender libraries are explicitly provided
their dependencies to an external libraries, which allows CMake to
ensure they are always linked against them.
General rule here: if bf_foo depends on an external library it is
to be provided to LIBS for bf_foo.
For example, if bf_blenkernel depends on opensubdiv then LIBS in
blenkernel's CMakeLists.txt is to include OPENSUBDIB_LIBRARIES.
The change is made based on searching for used include folders
such as OPENSUBDIV_INCLUDE_DIRS and adding corresponding libraries
to LIBS ion that CMakeLists.txt. Transitive dependencies are not
simplified by this approach, but I am not aware of any downside of
this: CMake should be smart enough to simplify them on its side.
And even if not, this shouldn't affect linking time.
Benefit of not relying on transitive dependencies is that build
system is more robust towards future changes. For example, if
bf_intern_opensubiv is no longer depends on OPENSUBDIV_LIBRARIES
and all such code is moved to bf_blenkernel this will not break
linking.
The not-so-trivial part is change to blender_add_lib (and its
version in Cycles). The complexity is caused by libraries being
provided as a single list argument which doesn't allow to use
different release and debug libraries on Windows. The idea is:
- Have every library prefixed as "optimized" or "debug" if
separation is needed (non-prefixed libraries will be considered
"generic").
- Loop through libraries passed to function and do simple parsing
which will look for "optimized" and "debug" words and specify
following library to corresponding category.
This isn't something particularly great. Alternative would be to
use target_link_libraries() directly, which sounds like more code
but which is more explicit and allows to have more flexibility
and control comparing to wrapper approach.
Tested the following configurations on Linux, macOS and Windows:
- make full debug developer
- make full release developer
- make lite debug developer
- make lite release developer
NOTE: Linux libraries needs to be compiled with D6641 applied,
otherwise, depending on configuration, it's possible to run into
duplicated zlib symbols error.
Differential Revision: https://developer.blender.org/D6642
|
|
Large objects with many separate pieces became unstably slow
(run for hours and not finish).
The entire original mesh was being duplicated twice per loose part.
In own tests, millions of vertices and thousands of loose parts
now run in around 5-15 seconds.
|
|
Along with the new utility `BM_vert_weld_linked_wire_edges_into_linked_faces`
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
|
|
Tested to work on Linux and macOS.
This will be enabled once all platforms are verified.
See D4684
|
|
|
|
No functional change, this adds LIB definition and args to cmake files.
Without this it's difficult to migrate away from 'BLENDER_SORTED_LIBS'
since there are many platforms/configurations that could break when
changing linking order.
Manually add and enable WITHOUT_SORTED_LIBS to try building
without sorted libs (currently fails since all variables are empty).
This check will eventually be removed.
See T46725.
|
|
Following removal from C source code.
See: 8c68ed6df16d8893
|
|
|
|
|
|
Other files with the same purpose already used 'query'.
|
|
This commit contains the minimum to make clang build/work with blender, asan and ninja build support is forthcoming
Things to note:
1) Builds and runs, and is able to pass all tests (except for the freestyle_stroke_material.blend test which was broken at that time for all platforms by the looks of it)
2) It's slightly faster than msvc when using cycles. (time in seconds, on an i7-3370)
victor_cpu
msvc:3099.51
clang:2796.43
pavillon_barcelona_cpu
msvc:1872.05
clang:1827.72
koro_cpu
msvc:1097.58
clang:1006.51
fishy_cat_cpu
msvc:815.37
clang:722.2
classroom_cpu
msvc:1705.39
clang:1575.43
bmw27_cpu
msvc:552.38
clang:561.53
barbershop_interior_cpu
msvc:2134.93
clang:1922.33
3) clang on windows uses a drop in replacement for the Microsoft cl.exe (takes some of the Microsoft parameters, but not all, and takes some of the clang parameters but not all) and uses ms headers + libraries + linker, so you still need visual studio installed and will use our existing vc14 svn libs.
4) X64 only currently, X86 builds but crashes on startup.
5) Tested with llvm/clang 6.0.0
6) Requires visual studio integration, available at https://github.com/LazyDodo/llvm-vs2017-integration
7) The Microsoft compiler spawns a few copies of cl in parallel to get faster build times, clang doesn't, so the build time is 3-4x slower than with msvc.
8) No openmp support yet. Have not looked at this much, the binary distribution of clang doesn't seem to include it on windows.
9) No ASAN support yet, some of the sanitizers can be made to work, but it was decided to leave support out of this commit.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D3304
|
|
|
|
|
|
`BM_mesh_normals_update` was converted from OMP to new parallel iterator code,
basic test with heavily subdivided cube (24.5k faces) gives:
- old OMP code: average 10ms per run.
- new BLI_task code: average 6ms per run.
So new code seems to be easily 40% quicker, in addition to getting rid of OMP. ;)
Reviewers: sergey, campbellbarton
Differential Revision: https://developer.blender.org/D2930
|
|
Fast-path for bmesh split operator which duplicates and deletes.
Use when only separating faces, currently used by the intersect tool.
|
|
Rewrote to work with ngons and and more complex topology, now uses separate function.
Fixes T48009.
|
|
currently for bmesh
|
|
Differential Revision: https://developer.blender.org/D1662
|
|
Isolate edge-net splitting in preparation for other functions to be added here.
|
|
- Add blentranslation `BLT_*` module.
- moved & split `BLF_translation.h` into (`BLT_translation.h`, `BLT_lang.h`).
- moved `BLF_*_unifont` functions from `blf_translation.c` to new source file `blf_font_i18n.c`.
|
|
Ability to quickly add 2x edge loops on either side of selected loops.
|
|
|
|
Access from Mesh -> Cleanup
|
|
Also add:
- generic callback for bmesh elements.
- ability to pass an existing array to a bmesh operator.
|
|
Select operator that takes multiple selected face regions and
selects any number of matching regions (when they have distinguishing features to isolate them).
UI access next.
|
|
Modeling tool to cut intersections into geometry (like boolean, without calculating inside/outside).
Faces are split along intersections, leaving new edges selected.
Access from Face menu.
|
|
|
|
|
|
|
|
|
|
This is a proper design if we want to use the beautify routine elsewhere
(e.g., in the triangulate modifier)
|
|
changes to tool args would rebuild far too many files and these are mainly by modifiers outside of bmesh.
|
|
plane as an argument, handles concave ngons which need multiple cuts.
|
|
* fill-holes operator now takes advantage of new edge-net fill, works in many more cases then it did before.
* face-create that uses edge-net now initializes the normals based on surrounding geometry, only running normal calculation if there are no connected faces for a reference.
|
|
previous code created faces with mixed face-flipping and could get very slow,
test with ~60,000 edges here hung my system for over 2min (didnt wait for it to finish), new code executes in about 1 second.
new code doesn't attempt to flip faces correctly, its quite involved to do so, especially when the new faces are not created adjacent to eachother.
so simpler to calculate normals afterwards.
|
|
exceed a given angle threshold
(access from the 'Mesh -> Clean' menu).
|
|
unlike other face creation tools it copies data from surrounding faces.
|