Age | Commit message (Collapse) | Author |
|
This caused too many problems syncing object modes
with multiple objects/windows/workspaces, see: D3130 for details.
|
|
|
|
|
|
|
|
The RenderResult struct still has a listbase of RenderLayer, but that's ok
since this is strictly for rendering.
* Subversion bump (to 2.80.2)
* DNA low level doversion (renames) - only for .blend created since 2.80 started
Note: We can't use DNA_struct_elem_find or get file version in init_structDNA,
so we are manually iterating over the array of the SDNA elements instead.
Note 2: This doversion change with renames can be reverted in a few months. But
so far it's required for 2.8 files created between October 2016 and now.
Reviewers: campbellbarton, sergey
Differential Revision: https://developer.blender.org/D2927
|
|
|
|
|
|
Means we can have a version of this function that returns the button
and avoids returning a struct that often isn't used.
|
|
We do have an history of those pieces of evil in our code, would be nice
to get fully rid of it, but at the very least let's not add more of them
in new code. :)
|
|
BKE_depsgraph.h
This removes BKE_depsgraph.h and depsgraph.c
|
|
This brings back adding hooks among other areas
|
|
|
|
multiple search of same op.
|
|
There are now only referenced in:
* drawobject.c
* particle_edit.c
* space_image.c (a single case to be handled on workspace branch)
* rigidbody_constraint.c (to be handled in the following commit)
|
|
Mostly from patch D2256 by Aaron Carlisle (@Blendify), thanks!
|
|
Now all consistent and using term "properties region" instead of "properties panel". Ideally we had a more generic operator for all those.
Fixes T49006.
|
|
With the scene scale set to 0.001, buttons were clamped to 10m.
|
|
- Add blentranslation `BLT_*` module.
- moved & split `BLF_translation.h` into (`BLT_translation.h`, `BLT_lang.h`).
- moved `BLF_*_unifont` functions from `blf_translation.c` to new source file `blf_font_i18n.c`.
|
|
* draw lattice boundingboxes in 3dView [if "show_bounds" is used -- an option previously pretty useless for lattices]
* give proper values for lattice objects ".bound_box" in bpy
* give proper values for armature objects ".bound_box" in bpy
* lets users use "Dimensions" [in 3dView Transform panel] on lattices and armatures
* remove redundant calculations in "boundbox_armature()"
Armatures boundingboxes were already drawn in 3dView, if "show_bounds" was used.
Based on report T45735: Lattice's bounding_box doesn't update,
and a comment in code by @campbellbarton ("later we may want to add dimensions for lattice, armature etc too").
Revision: https://developer.blender.org/D1460
|
|
matching convention for fixed length api, eg: copy_v3_fl
|
|
|
|
|
|
I'd kept the code around in the codebase until after the merge back to master
to avoid having too many conflicts if things changed there (or in case we
needed to roll back). Now, it's safe to jettison this!
|
|
This merge-commit brings in a number of new features and workflow/UI improvements for
working with Grease Pencil. While these were originally targetted at improving
the workflow for creating 3D storyboards in Blender using the Grease Pencil,
many of these changes should also prove useful in other workflows too.
The main highlights here are:
1) It is now possible to edit Grease Pencil strokes
- Use D Tab, or toggle the "Enable Editing" toggles in the Toolbar/Properties regions
to enter "Stroke Edit Mode". In this mode, many common editing tools will
operate on Grease Pencil stroke points instead.
- Tools implemented include Select, Select All/Border/Circle/Linked/More/Less,
Grab, Rotate, Scale, Bend, Shear, To Sphere, Mirror, Duplicate, Delete.
- Proportional Editing works when using the transform tools
2) Grease Pencil stroke settings can now be animated
NOTE: Currently drivers don't work, but if time allows, this may still be
added before the release.
3) Strokes can be drawn with "filled" interiors, using a separate set of
colour/opacity settings to the ones used for the lines themselves.
This makes use of OpenGL filled polys, which has the limitation of only
being able to fill convex shapes. Some artifacts may be visible on concave
shapes (e.g. pacman's mouth will be overdrawn)
4) "Volumetric Strokes" - An alternative drawing technique for stroke drawing
has been added which draws strokes as a series of screen-aligned discs.
While this was originally a partial experimental technique at getting better
quality 3D lines, the effects possible using this technique were interesting
enough to warrant making this a dedicated feature. Best results when partial
opacity and large stroke widths are used.
5) Improved Onion Skinning Support
- Different colours can be selected for the before/after ghosts. To do so,
enable the "colour wheel" toggle beside the Onion Skinning toggle, and set
the colours accordingly.
- Different numbers of ghosts can be shown before/after the current frame
6) Grease Pencil datablocks are now attached to the scene by default instead of
the active object.
- For a long time, the object-attachment has proved to be quite problematic
for users to keep track of. Now that this is done at scene level, it is
easier for most users to use.
- An exception for old files (and for any addons which may benefit from object
attachment instead), is that if the active object has a Grease Pencil datablock,
that will be used instead.
- It is not currently possible to choose object-attachment from the UI, but
it is simple to do this from the console instead, by doing:
context.active_object.grease_pencil = bpy.data.grease_pencil["blah"]
7) Various UI Cleanups
- The layers UI has been cleaned up to use a list instead of the nested-panels
design. Apart from saving space, this is also much nicer to look at now.
- The UI code is now all defined in Python. To support this, it has been necessary
to add some new context properties to make it easier to access these settings.
e.g. "gpencil_data" for the datablock
"active_gpencil_layer" and "active_gpencil_frame" for active data,
"editable_gpencil_strokes" for the strokes that can be edited
- The "stroke placement/alignment" settings (previously "Drawing Settings" at the
bottom of the Grease Pencil panel in the Properties Region) is now located in
the toolbar. These were more toolsettings than properties for how GPencil got drawn.
- "Use Sketching Sessions" has been renamed "Continuous Drawing", as per a
suggestion for an earlier discussion on developer.blender.org
- By default, the painting operator will wait for a mouse button to be pressed
before it starts creating the stroke. This is to make it easier to include
this operator in various toolbars/menus/etc. To get it immediately starting
(as when you hold down DKEy to draw), set "wait_for_input" to False.
- GPencil Layers can be rearranged in the "Grease Pencil" mode of the Action Editor
- Toolbar panels have been added to all the other editors which support these.
8) Pie menus for quick-access to tools
A set of experimental pie menus has been included for quick access to many
tools and settings. It is not necessary to use these to get things done,
but they have been designed to help make certain common tasks easier.
- Ctrl-D = The main pie menu. Reveals tools in a context sensitive and
spatially stable manner.
- D Q = "Quick Settings" pie. This allows quick access to the active
layer's settings. Notably, colours, thickness, and turning
onion skinning on/off.
|
|
|
|
BKE_object_deform.
Along with some minor cleanup and simplifications.
Reviewers: campbellbarton
Subscribers: sergey
Differential Revision: https://developer.blender.org/D903
|
|
Make the UI API more consistent and reduce confusion with some naming.
mainly:
- API function calls
- enum values
some internal static functions have been left for now
|
|
This was way too verbose, heavily factorized the code.
Also made sure only changed data are applied (was not always the case,
especially for curves and lattices), and that we always use raw value
when only one element is affected (was only that way for coordinates).
Note I checked performances, they seem to be roughly the same as previously.
|
|
verts/edges.
Afaik, a hidden BMesh element should never be selected. And this check was done in an
awfully inconsistent way! If it should really be needed, should be added back as a macro
used everywhere!
|
|
Mostly reorganizing mesh data handling to be always in the same order, this piece of code
is rather verbose, let's try to keep it organised a bit.
Also some visual UI tweaking.
|
|
This panel UI code needs more love, cleanup etc. in next commits.
|
|
|
|
|
|
Opted to keep includes if they are used indirectly (even if removing is possible).
|
|
|
|
|
|
|
|
|
|
|
|
commit 6f97e194e58aab38d351c796bf7bb6abca33f5f9
Author: Bastien Montagne <montagne29@wanadoo.fr>
Date: Wed Nov 20 21:18:20 2013 +0100
Code cleanup: Move some uiBut->flag to uiBut->drawflag, make those flags anonymous enums.
Summary:
Make some room in but->flag (I did not add another flag, we already have drawflag, which was nearly not used up till now).
Note: I’m not sure whether REDALERT (and perhaps even DISABLED?) should not go to but->drawflag as well...
Related to D8
Reviewers: brecht
Differential Revision: http://developer.blender.org/D22
|
|
When a single element is involved, apply directly the values instead of using the diff from init values. This avoids glitches when going from huge values to very small ones (due to float precision).
Note we should probably switch to doubles here, ultimately, but would leave that for later.
Manys thanks to Armin Zingler, who did all the investigation work on this point!
|
|
selected but not the mid-point.
only one of the handles would be changed to the HD_FREE.
effected curves and fcurves.
|
|
sizeof() use in BLI_array.h
|
|
not using it.
|
|
Mostly, "weight groups" -> "vertex groups", and usual case/endpoints/typos/etc.
As a remainder, please read http://wiki.blender.org/index.php/Dev:Doc/CodeStyle#UI_Messages before writing UI messages!
|
|
|
|
|
|
selection mode
|
|
|
|
select-all key shortcut.
|