Game Logic (bge.logic) ====================== ************ Introduction ************ Module to access logic functions, imported automatically into the python controllers namespace. .. module:: bge.logic .. code-block:: python # To get the controller thats running this python script: cont = bge.logic.getCurrentController() # bge.logic is automatically imported # To get the game object this controller is on: obj = cont.owner :class:`~bge.types.KX_GameObject` and :class:`~bge.types.KX_Camera` or :class:`~bge.types.KX_LightObject` methods are available depending on the type of object .. code-block:: python # To get a sensor linked to this controller. # "sensorname" is the name of the sensor as defined in the Blender interface. # +---------------------+ +--------+ # | Sensor "sensorname" +--+ Python + # +---------------------+ +--------+ sens = cont.sensors["sensorname"] # To get a sequence of all sensors: sensors = co.sensors See the sensor's reference for available methods: .. hlist:: :columns: 3 * :class:`~bge.types.KX_MouseFocusSensor` * :class:`~bge.types.KX_NearSensor` * :class:`~bge.types.KX_NetworkMessageSensor` * :class:`~bge.types.KX_RadarSensor` * :class:`~bge.types.KX_RaySensor` * :class:`~bge.types.KX_TouchSensor` * :class:`~bge.types.SCA_DelaySensor` * :class:`~bge.types.SCA_JoystickSensor` * :class:`~bge.types.SCA_KeyboardSensor` * :class:`~bge.types.SCA_MouseSensor` * :class:`~bge.types.SCA_PropertySensor` * :class:`~bge.types.SCA_RandomSensor` You can also access actuators linked to the controller .. code-block:: python # To get an actuator attached to the controller: # +--------+ +-------------------------+ # + Python +--+ Actuator "actuatorname" | # +--------+ +-------------------------+ actuator = co.actuators["actuatorname"] # Activate an actuator controller.activate(actuator) See the actuator's reference for available methods .. hlist:: :columns: 3 * :class:`~bge.types.BL_ActionActuator` * :class:`~bge.types.KX_CameraActuator` * :class:`~bge.types.KX_ConstraintActuator` * :class:`~bge.types.KX_GameActuator` * :class:`~bge.types.KX_NetworkMessageActuator` * :class:`~bge.types.KX_ObjectActuator` * :class:`~bge.types.KX_ParentActuator` * :class:`~bge.types.KX_SCA_AddObjectActuator` * :class:`~bge.types.KX_SCA_DynamicActuator` * :class:`~bge.types.KX_SCA_EndObjectActuator` * :class:`~bge.types.KX_SCA_ReplaceMeshActuator` * :class:`~bge.types.KX_SceneActuator` * :class:`~bge.types.KX_SoundActuator` * :class:`~bge.types.KX_StateActuator` * :class:`~bge.types.KX_TrackToActuator` * :class:`~bge.types.KX_VisibilityActuator` * :class:`~bge.types.SCA_2DFilterActuator` * :class:`~bge.types.SCA_PropertyActuator` * :class:`~bge.types.SCA_RandomActuator` Most logic brick's methods are accessors for the properties available in the logic buttons. Consult the logic bricks documentation for more information on how each logic brick works. There are also methods to access the current :class:`bge.types.KX_Scene` .. code-block:: python # Get the current scene scene = bge.logic.getCurrentScene() # Get the current camera cam = scene.active_camera Matricies as used by the game engine are **row major** ``matrix[row][col] = float`` :class:`bge.types.KX_Camera` has some examples using matrices. ********* Variables ********* .. data:: globalDict A dictionary that is saved between loading blend files so you can use it to store inventory and other variables you want to store between scenes and blend files. It can also be written to a file and loaded later on with the game load/save actuators. .. note:: only python built in types such as int/string/bool/float/tuples/lists can be saved, GameObjects, Actuators etc will not work as expected. .. data:: keyboard The current keyboard wrapped in an :class:`~bge.types.SCA_PythonKeyboard` object. .. data:: mouse The current mouse wrapped in an :class:`~bge.types.SCA_PythonMouse` object. .. data:: joysticks A list of attached :class:`~bge.types.SCA_PythonJoystick`. The list size is the maximum number of supported joysticks. If no joystick is available for a given slot, the slot is set to None. ***************** General functions ***************** .. function:: getCurrentController() Gets the Python controller associated with this Python script. :rtype: :class:`bge.types.SCA_PythonController` .. function:: getCurrentScene() Gets the current Scene. :rtype: :class:`bge.types.KX_Scene` .. function:: getSceneList() Gets a list of the current scenes loaded in the game engine. :rtype: list of :class:`bge.types.KX_Scene` .. note:: Scenes in your blend file that have not been converted wont be in this list. This list will only contain scenes such as overlays scenes. .. function:: loadGlobalDict() Loads bge.logic.globalDict from a file. .. function:: saveGlobalDict() Saves bge.logic.globalDict to a file. .. function:: startGame(blend) Loads the blend file. :arg blend: The name of the blend file :type blend: string .. function:: endGame() Ends the current game. .. function:: restartGame() Restarts the current game by reloading the .blend file (the last saved version, not what is currently running). .. function:: LibLoad(blend, type, data, load_actions=False, verbose=False, load_scripts=True, async=False) Converts the all of the datablocks of the given type from the given blend. :arg blend: The path to the blend file (or the name to use for the library if data is supplied) :type blend: string :arg type: The datablock type (currently only "Action", "Mesh" and "Scene" are supported) :type type: string :arg data: Binary data from a blend file (optional) :type data: bytes :arg load_actions: Search for and load all actions in a given Scene and not just the "active" actions (Scene type only) :type load_actions: bool :arg verbose: Whether or not to print debugging information (e.g., "SceneName: Scene") :type verbose: bool :arg load_scripts: Whether or not to load text datablocks as well (can be disabled for some extra security) :type load_scripts: bool :arg async: Whether or not to do the loading asynchronously (in another thread). Only the "Scene" type is currently supported for this feature. :type async: bool :rtype: :class:`bge.types.KX_LibLoadStatus` .. note:: Asynchronously loaded libraries will not be available immediately after LibLoad() returns. Use the returned KX_LibLoadStatus to figure out when the libraries are ready. .. function:: LibNew(name, type, data) Uses existing datablock data and loads in as a new library. :arg name: A unique library name used for removal later :type name: string :arg type: The datablock type (currently only "Mesh" is supported) :type type: string :arg data: A list of names of the datablocks to load :type data: list of strings .. function:: LibFree(name) Frees a library, removing all objects and meshes from the currently active scenes. :arg name: The name of the library to free (the name used in LibNew) :type name: string .. function:: LibList() Returns a list of currently loaded libraries. :rtype: list [str] .. function:: addScene(name, overlay=1) Loads a scene into the game engine. .. note:: This function is not effective immediately, the scene is queued and added on the next logic cycle where it will be available from `getSceneList` :arg name: The name of the scene :type name: string :arg overlay: Overlay or underlay (optional) :type overlay: integer .. function:: sendMessage(subject, body="", to="", message_from="") Sends a message to sensors in any active scene. :arg subject: The subject of the message :type subject: string :arg body: The body of the message (optional) :type body: string :arg to: The name of the object to send the message to (optional) :type to: string :arg message_from: The name of the object that the message is coming from (optional) :type message_from: string .. function:: setGravity(gravity) Sets the world gravity. :type gravity: list [fx, fy, fz] .. function:: getSpectrum() Returns a 512 point list from the sound card. This only works if the fmod sound driver is being used. :rtype: list [float], len(getSpectrum()) == 512 .. function:: getMaxLogicFrame() Gets the maximum number of logic frames per render frame. :return: The maximum number of logic frames per render frame :rtype: integer .. function:: setMaxLogicFrame(maxlogic) Sets the maximum number of logic frames that are executed per render frame. This does not affect the physic system that still runs at full frame rate. :arg maxlogic: The new maximum number of logic frames per render frame. Valid values: 1..5 :type maxlogic: integer .. function:: getMaxPhysicsFrame() Gets the maximum number of physics frames per render frame. :return: The maximum number of physics frames per render frame :rtype: integer .. function:: setMaxPhysicsFrame(maxphysics) Sets the maximum number of physics timestep that are executed per render frame. Higher value allows physics to keep up with realtime even if graphics slows down the game. Physics timestep is fixed and equal to 1/tickrate (see setLogicTicRate) maxphysics/ticrate is the maximum delay of the renderer that physics can compensate. :arg maxphysics: The new maximum number of physics timestep per render frame. Valid values: 1..5. :type maxphysics: integer .. function:: getLogicTicRate() Gets the logic update frequency. :return: The logic frequency in Hz :rtype: float .. function:: setLogicTicRate(ticrate) Sets the logic update frequency. The logic update frequency is the number of times logic bricks are executed every second. The default is 60 Hz. :arg ticrate: The new logic update frequency (in Hz). :type ticrate: float .. function:: getPhysicsTicRate() Gets the physics update frequency :return: The physics update frequency in Hz :rtype: float .. warning: Not implimented yet .. function:: setPhysicsTicRate(ticrate) Sets the physics update frequency The physics update frequency is the number of times the physics system is executed every second. The default is 60 Hz. :arg ticrate: The new update frequency (in Hz). :type ticrate: float .. warning: Not implimented yet .. function:: getExitKey() Gets the key used to exit the game engine :return: The key (defaults to :mod:`bge.events.ESCKEY`) :rtype: int .. function:: setExitKey(key) Sets the key used to exit the game engine :arg key: A key constant from :mod:`bge.events` :type key: int .. function:: NextFrame() Render next frame (if Python has control) ***************** Utility functions ***************** .. function:: expandPath(path) Converts a blender internal path into a proper file system path. Use / as directory separator in path You can use '//' at the start of the string to define a relative path; Blender replaces that string by the directory of the current .blend or runtime file to make a full path name. The function also converts the directory separator to the local file system format. :arg path: The path string to be converted/expanded. :type path: string :return: The converted string :rtype: string .. function:: getAverageFrameRate() Gets the estimated/average framerate for all the active scenes, not only the current scene. :return: The estimated average framerate in frames per second :rtype: float .. function:: getBlendFileList(path = "//") Returns a list of blend files in the same directory as the open blend file, or from using the option argument. :arg path: Optional directory argument, will be expanded (like expandPath) into the full path. :type path: string :return: A list of filenames, with no directory prefix :rtype: list .. function:: getRandomFloat() Returns a random floating point value in the range [0 - 1) .. function:: PrintGLInfo() Prints GL Extension Info into the console .. function:: PrintMemInfo() Prints engine statistics into the console .. function:: getProfileInfo() Returns a Python dictionary that contains the same information as the on screen profiler. The keys are the profiler categories and the values are tuples with the first element being time taken (in ms) and the second element being the percentage of total time. ********* Constants ********* .. data:: KX_TRUE True value used by some modules. .. data:: KX_FALSE False value used by some modules. ======= Sensors ======= .. _sensor-status: ------------- Sensor Status ------------- .. data:: KX_SENSOR_INACTIVE .. data:: KX_SENSOR_JUST_ACTIVATED .. data:: KX_SENSOR_ACTIVE .. data:: KX_SENSOR_JUST_DEACTIVATED --------------- Armature Sensor --------------- .. _armaturesensor-type: See :class:`bge.types.KX_ArmatureSensor.type` .. data:: KX_ARMSENSOR_STATE_CHANGED Detect that the constraint is changing state (active/inactive) :value: 0 .. data:: KX_ARMSENSOR_LIN_ERROR_BELOW Detect that the constraint linear error is above a threshold :value: 1 .. data:: KX_ARMSENSOR_LIN_ERROR_ABOVE Detect that the constraint linear error is below a threshold :value: 2 .. data:: KX_ARMSENSOR_ROT_ERROR_BELOW Detect that the constraint rotation error is above a threshold :value: 3 .. data:: KX_ARMSENSOR_ROT_ERROR_ABOVE Detect that the constraint rotation error is below a threshold :value: 4 .. _logic-property-sensor: --------------- Property Sensor --------------- .. data:: KX_PROPSENSOR_EQUAL Activate when the property is equal to the sensor value. :value: 1 .. data:: KX_PROPSENSOR_NOTEQUAL Activate when the property is not equal to the sensor value. :value: 2 .. data:: KX_PROPSENSOR_INTERVAL Activate when the property is between the specified limits. :value: 3 .. data:: KX_PROPSENSOR_CHANGED Activate when the property changes :value: 4 .. data:: KX_PROPSENSOR_EXPRESSION Activate when the expression matches :value: 5 ------------ Radar Sensor ------------ See :class:`bge.types.KX_RadarSensor` .. data:: KX_RADAR_AXIS_POS_X .. data:: KX_RADAR_AXIS_POS_Y .. data:: KX_RADAR_AXIS_POS_Z .. data:: KX_RADAR_AXIS_NEG_X .. data:: KX_RADAR_AXIS_NEG_Y .. data:: KX_RADAR_AXIS_NEG_Z ---------- Ray Sensor ---------- See :class:`bge.types.KX_RaySensor` .. data:: KX_RAY_AXIS_POS_X .. data:: KX_RAY_AXIS_POS_Y .. data:: KX_RAY_AXIS_POS_Z .. data:: KX_RAY_AXIS_NEG_X .. data:: KX_RAY_AXIS_NEG_Y .. data:: KX_RAY_AXIS_NEG_Z ========= Actuators ========= .. _action-actuator: --------------- Action Actuator --------------- See :class:`bge.types.BL_ActionActuator` .. data:: KX_ACTIONACT_PLAY .. data:: KX_ACTIONACT_PINGPONG .. data:: KX_ACTIONACT_FLIPPER .. data:: KX_ACTIONACT_LOOPSTOP .. data:: KX_ACTIONACT_LOOPEND .. data:: KX_ACTIONACT_PROPERTY ----------------- Armature Actuator ----------------- .. _armatureactuator-constants-type: See :class:`bge.types.BL_ArmatureActuator.type` .. data:: KX_ACT_ARMATURE_RUN Just make sure the armature will be updated on the next graphic frame. This is the only persistent mode of the actuator: it executes automatically once per frame until stopped by a controller :value: 0 .. data:: KX_ACT_ARMATURE_ENABLE Enable the constraint. :value: 1 .. data:: KX_ACT_ARMATURE_DISABLE Disable the constraint (runtime constraint values are not updated). :value: 2 .. data:: KX_ACT_ARMATURE_SETTARGET Change target and subtarget of constraint. :value: 3 .. data:: KX_ACT_ARMATURE_SETWEIGHT Change weight of constraint (IK only). :value: 4 .. data:: KX_ACT_ARMATURE_SETINFLUENCE Change influence of constraint. :value: 5 ------------------- Constraint Actuator ------------------- .. _constraint-actuator-option: See :class:`bge.types.KX_ConstraintActuator.option` * Applicable to Distance constraint: .. data:: KX_CONSTRAINTACT_NORMAL Activate alignment to surface .. data:: KX_CONSTRAINTACT_DISTANCE Activate distance control .. data:: KX_CONSTRAINTACT_LOCAL Direction of the ray is along the local axis * Applicable to Force field constraint: .. data:: KX_CONSTRAINTACT_DOROTFH Force field act on rotation as well * Applicable to both: .. data:: KX_CONSTRAINTACT_MATERIAL Detect material rather than property .. data:: KX_CONSTRAINTACT_PERMANENT No deactivation if ray does not hit target .. _constraint-actuator-limit: See :class:`bge.types.KX_ConstraintActuator.limit` .. data:: KX_CONSTRAINTACT_LOCX Limit X coord. .. data:: KX_CONSTRAINTACT_LOCY Limit Y coord .. data:: KX_CONSTRAINTACT_LOCZ Limit Z coord .. data:: KX_CONSTRAINTACT_ROTX Limit X rotation .. data:: KX_CONSTRAINTACT_ROTY Limit Y rotation .. data:: KX_CONSTRAINTACT_ROTZ Limit Z rotation .. data:: KX_CONSTRAINTACT_DIRNX Set distance along negative X axis .. data:: KX_CONSTRAINTACT_DIRNY Set distance along negative Y axis .. data:: KX_CONSTRAINTACT_DIRNZ Set distance along negative Z axis .. data:: KX_CONSTRAINTACT_DIRPX Set distance along positive X axis .. data:: KX_CONSTRAINTACT_DIRPY Set distance along positive Y axis .. data:: KX_CONSTRAINTACT_DIRPZ Set distance along positive Z axis .. data:: KX_CONSTRAINTACT_ORIX Set orientation of X axis .. data:: KX_CONSTRAINTACT_ORIY Set orientation of Y axis .. data:: KX_CONSTRAINTACT_ORIZ Set orientation of Z axis .. data:: KX_CONSTRAINTACT_FHNX Set force field along negative X axis .. data:: KX_CONSTRAINTACT_FHNY Set force field along negative Y axis .. data:: KX_CONSTRAINTACT_FHNZ Set force field along negative Z axis .. data:: KX_CONSTRAINTACT_FHPX Set force field along positive X axis .. data:: KX_CONSTRAINTACT_FHPY Set force field along positive Y axis .. data:: KX_CONSTRAINTACT_FHPZ Set force field along positive Z axis ---------------- Dynamic Actuator ---------------- See :class:`bge.types.KX_SCA_DynamicActuator` .. data:: KX_DYN_RESTORE_DYNAMICS .. data:: KX_DYN_DISABLE_DYNAMICS .. data:: KX_DYN_ENABLE_RIGID_BODY .. data:: KX_DYN_DISABLE_RIGID_BODY .. data:: KX_DYN_SET_MASS .. _game-actuator: ------------- Game Actuator ------------- See :class:`bge.types.KX_GameActuator` .. data:: KX_GAME_LOAD .. data:: KX_GAME_START .. data:: KX_GAME_RESTART .. data:: KX_GAME_QUIT .. data:: KX_GAME_SAVECFG .. data:: KX_GAME_LOADCFG --------------- Parent Actuator --------------- .. data:: KX_PARENT_REMOVE .. data:: KX_PARENT_SET .. _logic-random-distributions: -------------------- Random Distributions -------------------- See :class:`bge.types.SCA_RandomActuator` .. data:: KX_RANDOMACT_BOOL_CONST .. data:: KX_RANDOMACT_BOOL_UNIFORM .. data:: KX_RANDOMACT_BOOL_BERNOUILLI .. data:: KX_RANDOMACT_INT_CONST .. data:: KX_RANDOMACT_INT_UNIFORM .. data:: KX_RANDOMACT_INT_POISSON .. data:: KX_RANDOMACT_FLOAT_CONST .. data:: KX_RANDOMACT_FLOAT_UNIFORM .. data:: KX_RANDOMACT_FLOAT_NORMAL .. data:: KX_RANDOMACT_FLOAT_NEGATIVE_EXPONENTIAL -------------- Scene Actuator -------------- See :class:`bge.types.KX_SceneActuator` .. data:: KX_SCENE_RESTART .. data:: KX_SCENE_SET_SCENE .. data:: KX_SCENE_SET_CAMERA .. data:: KX_SCENE_ADD_FRONT_SCENE .. data:: KX_SCENE_ADD_BACK_SCENE .. data:: KX_SCENE_REMOVE_SCENE .. data:: KX_SCENE_SUSPEND .. data:: KX_SCENE_RESUME .. _logic-sound-actuator: -------------- Sound Actuator -------------- See :class:`bge.types.KX_SoundActuator` .. data:: KX_SOUNDACT_PLAYSTOP :value: 1 .. data:: KX_SOUNDACT_PLAYEND :value: 2 .. data:: KX_SOUNDACT_LOOPSTOP :value: 3 .. data:: KX_SOUNDACT_LOOPEND :value: 4 .. data:: KX_SOUNDACT_LOOPBIDIRECTIONAL :value: 5 .. data:: KX_SOUNDACT_LOOPBIDIRECTIONAL_STOP :value: 6 ----------------- Steering Actuator ----------------- .. _logic-steering-actuator: See :class:`bge.types.KX_SteeringActuator.behavior` .. data:: KX_STEERING_SEEK :value: 1 .. data:: KX_STEERING_FLEE :value: 2 .. data:: KX_STEERING_PATHFOLLOWING :value: 3 ======= Various ======= --------- 2D Filter --------- .. data:: RAS_2DFILTER_BLUR :value: 2 .. data:: RAS_2DFILTER_CUSTOMFILTER Customer filter, the code code is set via shaderText property. :value: 12 .. data:: RAS_2DFILTER_DILATION :value: 4 .. data:: RAS_2DFILTER_DISABLED Disable the filter that is currently active :value: -1 .. data:: RAS_2DFILTER_ENABLED Enable the filter that was previously disabled :value: -2 .. data:: RAS_2DFILTER_EROSION :value: 5 .. data:: RAS_2DFILTER_GRAYSCALE :value: 9 .. data:: RAS_2DFILTER_INVERT :value: 11 .. data:: RAS_2DFILTER_LAPLACIAN :value: 6 .. data:: RAS_2DFILTER_MOTIONBLUR Create and enable preset filters :value: 1 .. data:: RAS_2DFILTER_NOFILTER Disable and destroy the filter that is currently active :value: 0 .. data:: RAS_2DFILTER_PREWITT :value: 8 .. data:: RAS_2DFILTER_SEPIA :value: 10 .. data:: RAS_2DFILTER_SHARPEN :value: 3 .. data:: RAS_2DFILTER_SOBEL :value: 7 ---------------- Armature Channel ---------------- .. _armaturechannel-constants-rotation-mode: See :class:`bge.types.BL_ArmatureChannel.rotation_mode` .. note: euler mode are named as in Blender UI but the actual axis order is reversed .. data:: ROT_MODE_QUAT Use quaternion in rotation attribute to update bone rotation. :value: 0 .. data:: ROT_MODE_XYZ Use euler_rotation and apply angles on bone's Z, Y, X axis successively. :value: 1 .. data:: ROT_MODE_XZY Use euler_rotation and apply angles on bone's Y, Z, X axis successively. :value: 2 .. data:: ROT_MODE_YXZ Use euler_rotation and apply angles on bone's Z, X, Y axis successively. :value: 3 .. data:: ROT_MODE_YZX Use euler_rotation and apply angles on bone's X, Z, Y axis successively. :value: 4 .. data:: ROT_MODE_ZXY Use euler_rotation and apply angles on bone's Y, X, Z axis successively. :value: 5 .. data:: ROT_MODE_ZYX Use euler_rotation and apply angles on bone's X, Y, Z axis successively. :value: 6 ------------------- Armature Constraint ------------------- .. _armatureconstraint-constants-type: See :class:`bge.types.BL_ArmatureConstraint.type` .. data:: CONSTRAINT_TYPE_TRACKTO .. data:: CONSTRAINT_TYPE_KINEMATIC .. data:: CONSTRAINT_TYPE_ROTLIKE .. data:: CONSTRAINT_TYPE_LOCLIKE .. data:: CONSTRAINT_TYPE_MINMAX .. data:: CONSTRAINT_TYPE_SIZELIKE .. data:: CONSTRAINT_TYPE_LOCKTRACK .. data:: CONSTRAINT_TYPE_STRETCHTO .. data:: CONSTRAINT_TYPE_CLAMPTO .. data:: CONSTRAINT_TYPE_TRANSFORM .. data:: CONSTRAINT_TYPE_DISTLIMIT .. _armatureconstraint-constants-ik-type: See :class:`bge.types.BL_ArmatureConstraint.ik_type` .. data:: CONSTRAINT_IK_COPYPOSE constraint is trying to match the position and eventually the rotation of the target. :value: 0 .. data:: CONSTRAINT_IK_DISTANCE Constraint is maintaining a certain distance to target subject to ik_mode :value: 1 .. _armatureconstraint-constants-ik-flag: See :class:`bge.types.BL_ArmatureConstraint.ik_flag` .. data:: CONSTRAINT_IK_FLAG_TIP Set when the constraint operates on the head of the bone and not the tail :value: 1 .. data:: CONSTRAINT_IK_FLAG_ROT Set when the constraint tries to match the orientation of the target :value: 2 .. data:: CONSTRAINT_IK_FLAG_STRETCH Set when the armature is allowed to stretch (only the bones with stretch factor > 0.0) :value: 16 .. data:: CONSTRAINT_IK_FLAG_POS Set when the constraint tries to match the position of the target. :value: 32 .. _armatureconstraint-constants-ik-mode: See :class:`bge.types.BL_ArmatureConstraint.ik_mode` .. data:: CONSTRAINT_IK_MODE_INSIDE The constraint tries to keep the bone within ik_dist of target :value: 0 .. data:: CONSTRAINT_IK_MODE_OUTSIDE The constraint tries to keep the bone outside ik_dist of the target :value: 1 .. data:: CONSTRAINT_IK_MODE_ONSURFACE The constraint tries to keep the bone exactly at ik_dist of the target. :value: 2 .. _input-status: ---------------- Blender Material ---------------- .. data:: BL_DST_ALPHA .. data:: BL_DST_COLOR .. data:: BL_ONE .. data:: BL_ONE_MINUS_DST_ALPHA .. data:: BL_ONE_MINUS_DST_COLOR .. data:: BL_ONE_MINUS_SRC_ALPHA .. data:: BL_ONE_MINUS_SRC_COLOR .. data:: BL_SRC_ALPHA .. data:: BL_SRC_ALPHA_SATURATE .. data:: BL_SRC_COLOR .. data:: BL_ZERO ------------ Input Status ------------ See :class:`bge.types.SCA_PythonKeyboard`, :class:`bge.types.SCA_PythonMouse`, :class:`bge.types.SCA_MouseSensor`, :class:`bge.types.SCA_KeyboardSensor` .. data:: KX_INPUT_NONE .. data:: KX_INPUT_JUST_ACTIVATED .. data:: KX_INPUT_ACTIVE .. data:: KX_INPUT_JUST_RELEASED ------------- KX_GameObject ------------- .. _gameobject-playaction-mode: See :class:`bge.types.KX_GameObject.playAction` .. data:: KX_ACTION_MODE_PLAY Play the action once. :value: 0 .. data:: KX_ACTION_MODE_LOOP Loop the action (repeat it). :value: 1 .. data:: KX_ACTION_MODE_PING_PONG Play the action one direct then back the other way when it has completed. :value: 2 .. _gameobject-playaction-blend: .. data:: KX_ACTION_BLEND_BLEND Blend layers using linear interpolation :value: 0 .. data:: KX_ACTION_BLEND_ADD Adds the layers together :value: 1 ------------- Mouse Buttons ------------- See :class:`bge.types.SCA_MouseSensor` .. data:: KX_MOUSE_BUT_LEFT .. data:: KX_MOUSE_BUT_MIDDLE .. data:: KX_MOUSE_BUT_RIGHT -------------------------- Navigation Mesh Draw Modes -------------------------- .. _navmesh-draw-mode: .. data:: RM_WALLS Draw only the walls. .. data:: RM_POLYS Draw only polygons. .. data:: RM_TRIS Draw triangle mesh. ------ Shader ------ .. data:: VIEWMATRIX .. data:: VIEWMATRIX_INVERSE .. data:: VIEWMATRIX_INVERSETRANSPOSE .. data:: VIEWMATRIX_TRANSPOSE .. data:: MODELMATRIX .. data:: MODELMATRIX_INVERSE .. data:: MODELMATRIX_INVERSETRANSPOSE .. data:: MODELMATRIX_TRANSPOSE .. data:: MODELVIEWMATRIX .. data:: MODELVIEWMATRIX_INVERSE .. data:: MODELVIEWMATRIX_INVERSETRANSPOSE .. data:: MODELVIEWMATRIX_TRANSPOSE .. data:: CAM_POS Current camera position .. data:: CONSTANT_TIMER User a timer for the uniform value. .. data:: SHD_TANGENT ------ States ------ See :class:`bge.types.KX_StateActuator` .. data:: KX_STATE1 .. data:: KX_STATE2 .. data:: KX_STATE3 .. data:: KX_STATE4 .. data:: KX_STATE5 .. data:: KX_STATE6 .. data:: KX_STATE7 .. data:: KX_STATE8 .. data:: KX_STATE9 .. data:: KX_STATE10 .. data:: KX_STATE11 .. data:: KX_STATE12 .. data:: KX_STATE13 .. data:: KX_STATE14 .. data:: KX_STATE15 .. data:: KX_STATE16 .. data:: KX_STATE17 .. data:: KX_STATE18 .. data:: KX_STATE19 .. data:: KX_STATE20 .. data:: KX_STATE21 .. data:: KX_STATE22 .. data:: KX_STATE23 .. data:: KX_STATE24 .. data:: KX_STATE25 .. data:: KX_STATE26 .. data:: KX_STATE27 .. data:: KX_STATE28 .. data:: KX_STATE29 .. data:: KX_STATE30 .. _state-actuator-operation: See :class:`bge.types.KX_StateActuator.operation` .. data:: KX_STATE_OP_CLR Substract bits to state mask :value: 0 .. data:: KX_STATE_OP_CPY Copy state mask :value: 1 .. data:: KX_STATE_OP_NEG Invert bits to state mask :value: 2 .. data:: KX_STATE_OP_SET Add bits to state mask :value: 3 .. _Two-D-FilterActuator-mode: