/* * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software Foundation, * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ /** \file * \ingroup bmesh * * Main functions for beveling a BMesh (used by the tool and modifier) */ #include "MEM_guardedalloc.h" #include "DNA_curveprofile_types.h" #include "DNA_meshdata_types.h" #include "DNA_modifier_types.h" #include "DNA_scene_types.h" #include "BLI_alloca.h" #include "BLI_array.h" #include "BLI_math.h" #include "BLI_memarena.h" #include "BLI_utildefines.h" #include "BKE_curveprofile.h" #include "BKE_customdata.h" #include "BKE_deform.h" #include "BKE_mesh.h" #include "eigen_capi.h" #include "bmesh.h" #include "bmesh_bevel.h" /* own include */ #include "./intern/bmesh_private.h" #define BEVEL_EPSILON_D 1e-6 #define BEVEL_EPSILON 1e-6f #define BEVEL_EPSILON_SQ 1e-12f #define BEVEL_EPSILON_BIG 1e-4f #define BEVEL_EPSILON_BIG_SQ 1e-8f #define BEVEL_EPSILON_ANG DEG2RADF(2.0f) #define BEVEL_SMALL_ANG DEG2RADF(10.0f) /** Difference in dot products that corresponds to 10 degree difference between vectors. */ #define BEVEL_SMALL_ANG_DOT 1 - cosf(BEVEL_SMALL_ANG) #define BEVEL_MAX_ADJUST_PCT 10.0f #define BEVEL_MAX_AUTO_ADJUST_PCT 300.0f #define BEVEL_MATCH_SPEC_WEIGHT 0.2 //#define DEBUG_CUSTOM_PROFILE_CUTOFF /* Happens far too often, uncomment for development. */ // #define BEVEL_ASSERT_PROJECT /* for testing */ // #pragma GCC diagnostic error "-Wpadded" /* Constructed vertex, sometimes later instantiated as BMVert. */ typedef struct NewVert { BMVert *v; float co[3]; char _pad[4]; } NewVert; struct BoundVert; /* Data for one end of an edge involved in a bevel. */ typedef struct EdgeHalf { /** Other EdgeHalves connected to the same BevVert, in CCW order. */ struct EdgeHalf *next, *prev; /** Original mesh edge. */ BMEdge *e; /** Face between this edge and previous, if any. */ BMFace *fprev; /** Face between this edge and next, if any. */ BMFace *fnext; /** Left boundary vert (looking along edge to end). */ struct BoundVert *leftv; /** Right boundary vert, if beveled. */ struct BoundVert *rightv; /** Offset into profile to attach non-beveled edge. */ int profile_index; /** How many segments for the bevel. */ int seg; /** Offset for this edge, on left side. */ float offset_l; /** Offset for this edge, on right side. */ float offset_r; /** User specification for offset_l. */ float offset_l_spec; /** User specification for offset_r. */ float offset_r_spec; /** Is this edge beveled? */ bool is_bev; /** Is e->v2 the vertex at this end? */ bool is_rev; /** Is e a seam for custom loopdata (e.g., UVs)? */ bool is_seam; /** Used during the custom profile orientation pass. */ bool visited_rpo; char _pad[4]; } EdgeHalf; /** * Profile specification: * The profile is a path defined with start, middle, and end control points projected onto a * plane (plane_no is normal, plane_co is a point on it) via lines in a given direction (proj_dir). * * Many interesting profiles are in family of superellipses: * (abs(x/a))^r + abs(y/b))^r = 1 * r==2 => ellipse; r==1 => line; r < 1 => concave; r > 1 => bulging out. * Special cases: let r==0 mean straight-inward, and r==4 mean straight outward. * * After the parameters are all set, the actual profile points are calculated and pointed to * by prof_co. We also may need profile points for a higher resolution number of segments * for the subdivision while making the ADJ vertex mesh pattern, and that goes in prof_co_2. */ typedef struct Profile { /** Superellipse r parameter. */ float super_r; /** Height for profile cutoff face sides. */ float height; /** Start control point for profile. */ float start[3]; /** Mid control point for profile. */ float middle[3]; /** End control point for profile. */ float end[3]; /** Normal of plane to project to. */ float plane_no[3]; /** Coordinate on plane to project to. */ float plane_co[3]; /** Direction of projection line. */ float proj_dir[3]; /** seg+1 profile coordinates (triples of floats). */ float *prof_co; /** Like prof_co, but for seg power of 2 >= seg. */ float *prof_co_2; /** Mark a special case so the these parameters aren't reset with others. */ bool special_params; } Profile; #define PRO_SQUARE_R 1e4f #define PRO_CIRCLE_R 2.0f #define PRO_LINE_R 1.0f #define PRO_SQUARE_IN_R 0.0f /** * The un-transformed 2D storage of profile vertex locations. Also, for non-custom profiles * this serves as a cache for the results of the expensive calculation of u parameter values to * get even spacing on superellipse for current BevelParams seg and pro_super_r. */ typedef struct ProfileSpacing { /** The profile's seg+1 x values. */ double *xvals; /** The profile's seg+1 y values. */ double *yvals; /** The profile's seg_2+1 x values, (seg_2 = power of 2 >= seg). */ double *xvals_2; /** The profile's seg_2+1 y values, (seg_2 = power of 2 >= seg). */ double *yvals_2; /** The power of two greater than or equal to the number of segments. */ int seg_2; /** How far "out" the profile is, used at the start of subdivision. */ float fullness; } ProfileSpacing; /** * If the mesh has custom data Loop layers that 'have math' we use this * data to help decide which face to use as representative when there * is an ambiguous choice as to which face to use, which happens * when there is an odd number of segments. * * The face_compent field of the following will only be set if there are an odd * number of segments. The it uses BMFace indices to index into it, so will * only be valid as long BMFaces are not added or deleted in the BMesh. * "Connected Component" here means connected in UV space: * i.e., one face is directly connected to another if they share an edge and * all of Loop UV custom layers are contiguous across that edge. */ typedef struct MathLayerInfo { /** A connected-component id for each BMFace in the mesh. */ int *face_component; /** Does the mesh have any custom loop uv layers? */ bool has_math_layers; } MathLayerInfo; /** * An element in a cyclic boundary of a Vertex Mesh (VMesh), placed on each side of beveled edges * where each profile starts, or on each side of a miter. */ typedef struct BoundVert { /** In CCW order. */ struct BoundVert *next, *prev; NewVert nv; /** First of edges attached here: in CCW order. */ EdgeHalf *efirst; EdgeHalf *elast; /** The "edge between" that this boundvert on, in offset_on_edge_between case. */ EdgeHalf *eon; /** Beveled edge whose left side is attached here, if any. */ EdgeHalf *ebev; /** Used for vmesh indexing. */ int index; /** When eon set, ratio of sines of angles to eon edge. */ float sinratio; /** Adjustment chain or cycle link pointer. */ struct BoundVert *adjchain; /** Edge profile between this and next BoundVert. */ Profile profile; /** Are any of the edges attached here seams? */ bool any_seam; /** Used during delta adjust pass. */ bool visited; /** This boundvert begins an arc profile. */ bool is_arc_start; /** This boundvert begins a patch profile. */ bool is_patch_start; /** Is this boundvert the side of the custom profile's start. */ bool is_profile_start; char _pad[3]; /** Length of seam starting from current boundvert to next boundvert with ccw ordering. */ int seam_len; /** Same as seam_len but defines length of sharp edges. */ int sharp_len; } BoundVert; /** Data for the mesh structure replacing a vertex. */ typedef struct VMesh { /** Allocated array - size and structure depends on kind. */ NewVert *mesh; /** Start of boundary double-linked list. */ BoundVert *boundstart; /** Number of vertices in the boundary. */ int count; /** Common number of segments for segmented edges (same as bp->seg). */ int seg; /** The kind of mesh to build at the corner vertex meshes. */ enum { M_NONE, /* No polygon mesh needed. */ M_POLY, /* A simple polygon. */ M_ADJ, /* "Adjacent edges" mesh pattern. */ M_TRI_FAN, /* A simple polygon - fan filled. */ M_CUTOFF, /* A triangulated face at the end of each profile. */ } mesh_kind; int _pad; } VMesh; /* Data for a vertex involved in a bevel. */ typedef struct BevVert { /** Original mesh vertex. */ BMVert *v; /** Total number of edges around the vertex (excluding wire edges if edge beveling). */ int edgecount; /** Number of selected edges around the vertex. */ int selcount; /** Count of wire edges. */ int wirecount; /** Offset for this vertex, if vertex only bevel. */ float offset; /** Any seams on attached edges? */ bool any_seam; /** Used in graph traversal for adjusting offsets. */ bool visited; /** Array of size edgecount; CCW order from vertex normal side. */ char _pad[6]; EdgeHalf *edges; /** Array of size wirecount of wire edges. */ BMEdge **wire_edges; /** Mesh structure for replacing vertex. */ VMesh *vmesh; } BevVert; /* Face classification. Note: depends on F_RECON > F_EDGE > F_VERT .*/ typedef enum { /** Used when there is no face at all. */ F_NONE, /** Original face, not touched. */ F_ORIG, /** Face for construction around a vert. */ F_VERT, /** Face for a beveled edge. */ F_EDGE, /** Reconstructed original face with some new verts. */ F_RECON, } FKind; /** Helper for keeping track of angle kind. */ enum { /** Angle less than 180 degrees. */ ANGLE_SMALLER = -1, /** 180 degree angle. */ ANGLE_STRAIGHT = 0, /** Angle greater than 180 degrees. */ ANGLE_LARGER = 1, }; /** Bevel parameters and state. */ typedef struct BevelParams { /** Records BevVerts made: key BMVert*, value BevVert* */ GHash *vert_hash; /** Records new faces: key BMFace*, value one of {VERT/EDGE/RECON}_POLY. */ GHash *face_hash; /** Use for all allocs while bevel runs. Note: If we need to free we can switch to mempool. */ MemArena *mem_arena; /** Profile vertex location and spacings. */ ProfileSpacing pro_spacing; /** Parameter values for evenly spaced profile points for the miter profiles. */ ProfileSpacing pro_spacing_miter; /** Information about 'math' loop layers, like UV layers. */ MathLayerInfo math_layer_info; /** Blender units to offset each side of a beveled edge. */ float offset; /** How offset is measured; enum defined in bmesh_operators.h. */ int offset_type; /** Profile type: radius, superellipse, or custom */ int profile_type; /** Bevel vertices only or edges. */ int affect_type; /** Number of segments in beveled edge profile. */ int seg; /** User profile setting. */ float profile; /** Superellipse parameter for edge profile. */ float pro_super_r; /** Bevel amount affected by weights on edges or verts. */ bool use_weights; /** Should bevel prefer to slide along edges rather than keep widths spec? */ bool loop_slide; /** Should offsets be limited by collisions? */ bool limit_offset; /** Should offsets be adjusted to try to get even widths? */ bool offset_adjust; /** Should we propagate seam edge markings? */ bool mark_seam; /** Should we propagate sharp edge markings? */ bool mark_sharp; /** Should we harden normals? */ bool harden_normals; char _pad[1]; /** The struct used to store the custom profile input. */ const struct CurveProfile *custom_profile; /** Vertex group array, maybe set if vertex only. */ const struct MDeformVert *dvert; /** Vertex group index, maybe set if vertex only. */ int vertex_group; /** If >= 0, material number for bevel; else material comes from adjacent faces. */ int mat_nr; /** Setting face strength if > 0. */ int face_strength_mode; /** What kind of miter pattern to use on reflex angles. */ int miter_outer; /** What kind of miter pattern to use on non-reflex angles. */ int miter_inner; /** The method to use for vertex mesh creation */ int vmesh_method; /** Amount to spread when doing inside miter. */ float spread; /** Mesh's smoothresh, used if hardening. */ float smoothresh; } BevelParams; // #pragma GCC diagnostic ignored "-Wpadded" /* Only for debugging, this file shouldn't be in blender repo. */ // #include "bevdebug.c" /* Use the unused _BM_ELEM_TAG_ALT flag to flag the 'long' loops (parallel to beveled edge) * of edge-polygons. */ #define BM_ELEM_LONG_TAG (1 << 6) /* These flag values will get set on geom we want to return in 'out' slots for edges and verts. */ #define EDGE_OUT 4 #define VERT_OUT 8 /* If we're called from the modifier, tool flags aren't available, * but don't need output geometry. */ static void flag_out_edge(BMesh *bm, BMEdge *bme) { if (bm->use_toolflags) { BMO_edge_flag_enable(bm, bme, EDGE_OUT); } } static void flag_out_vert(BMesh *bm, BMVert *bmv) { if (bm->use_toolflags) { BMO_vert_flag_enable(bm, bmv, VERT_OUT); } } static void disable_flag_out_edge(BMesh *bm, BMEdge *bme) { if (bm->use_toolflags) { BMO_edge_flag_disable(bm, bme, EDGE_OUT); } } static void record_face_kind(BevelParams *bp, BMFace *f, FKind fkind) { if (bp->face_hash) { BLI_ghash_insert(bp->face_hash, f, POINTER_FROM_INT(fkind)); } } static FKind get_face_kind(BevelParams *bp, BMFace *f) { void *val = BLI_ghash_lookup(bp->face_hash, f); return val ? (FKind)POINTER_AS_INT(val) : F_ORIG; } /* Are d1 and d2 parallel or nearly so? */ static bool nearly_parallel(const float d1[3], const float d2[3]) { float ang; ang = angle_v3v3(d1, d2); return (fabsf(ang) < BEVEL_EPSILON_ANG) || (fabsf(ang - (float)M_PI) < BEVEL_EPSILON_ANG); } /* Make a new BoundVert of the given kind, inserting it at the end of the circular linked * list with entry point bv->boundstart, and return it. */ static BoundVert *add_new_bound_vert(MemArena *mem_arena, VMesh *vm, const float co[3]) { BoundVert *ans = (BoundVert *)BLI_memarena_alloc(mem_arena, sizeof(BoundVert)); copy_v3_v3(ans->nv.co, co); if (!vm->boundstart) { ans->index = 0; vm->boundstart = ans; ans->next = ans->prev = ans; } else { BoundVert *tail = vm->boundstart->prev; ans->index = tail->index + 1; ans->prev = tail; ans->next = vm->boundstart; tail->next = ans; vm->boundstart->prev = ans; } ans->profile.super_r = PRO_LINE_R; ans->adjchain = NULL; ans->sinratio = 1.0f; ans->visited = false; ans->any_seam = false; ans->is_arc_start = false; ans->is_patch_start = false; ans->is_profile_start = false; vm->count++; return ans; } BLI_INLINE void adjust_bound_vert(BoundVert *bv, const float co[3]) { copy_v3_v3(bv->nv.co, co); } /* Mesh verts are indexed (i, j, k) where * i = boundvert index (0 <= i < nv) * j = ring index (0 <= j <= ns2) * k = segment index (0 <= k <= ns) * Not all of these are used, and some will share BMVerts. */ static NewVert *mesh_vert(VMesh *vm, int i, int j, int k) { int nj = (vm->seg / 2) + 1; int nk = vm->seg + 1; return &vm->mesh[i * nk * nj + j * nk + k]; } static void create_mesh_bmvert(BMesh *bm, VMesh *vm, int i, int j, int k, BMVert *eg) { NewVert *nv = mesh_vert(vm, i, j, k); nv->v = BM_vert_create(bm, nv->co, eg, BM_CREATE_NOP); BM_elem_flag_disable(nv->v, BM_ELEM_TAG); flag_out_vert(bm, nv->v); } static void copy_mesh_vert(VMesh *vm, int ito, int jto, int kto, int ifrom, int jfrom, int kfrom) { NewVert *nvto, *nvfrom; nvto = mesh_vert(vm, ito, jto, kto); nvfrom = mesh_vert(vm, ifrom, jfrom, kfrom); nvto->v = nvfrom->v; copy_v3_v3(nvto->co, nvfrom->co); } /* Find the EdgeHalf in bv's array that has edge bme. */ static EdgeHalf *find_edge_half(BevVert *bv, BMEdge *bme) { int i; for (i = 0; i < bv->edgecount; i++) { if (bv->edges[i].e == bme) { return &bv->edges[i]; } } return NULL; } /* Find the BevVert corresponding to BMVert bmv. */ static BevVert *find_bevvert(BevelParams *bp, BMVert *bmv) { return BLI_ghash_lookup(bp->vert_hash, bmv); } /** * Find the EdgeHalf representing the other end of e->e. * \return Return other end's BevVert in *r_bvother, if r_bvother is provided. That may not have * been constructed yet, in which case return NULL. */ static EdgeHalf *find_other_end_edge_half(BevelParams *bp, EdgeHalf *e, BevVert **r_bvother) { BevVert *bvo; EdgeHalf *eother; bvo = find_bevvert(bp, e->is_rev ? e->e->v1 : e->e->v2); if (bvo) { if (r_bvother) { *r_bvother = bvo; } eother = find_edge_half(bvo, e->e); BLI_assert(eother != NULL); return eother; } if (r_bvother) { *r_bvother = NULL; } return NULL; } /* Return the next EdgeHalf after from_e that is beveled. * If from_e is NULL, find the first beveled edge. */ static EdgeHalf *next_bev(BevVert *bv, EdgeHalf *from_e) { EdgeHalf *e; if (from_e == NULL) { from_e = &bv->edges[bv->edgecount - 1]; } e = from_e; do { if (e->is_bev) { return e; } } while ((e = e->next) != from_e); return NULL; } /* Return the count of edges between e1 and e2 when going around bv CCW. */ static int count_ccw_edges_between(EdgeHalf *e1, EdgeHalf *e2) { int cnt = 0; EdgeHalf *e = e1; do { if (e == e2) { break; } e = e->next; cnt++; } while (e != e1); return cnt; } /* Assume bme1 and bme2 both share some vert. Do they share a face? * If they share a face then there is some loop around bme1 that is in a face * where the next or previous edge in the face must be bme2. */ static bool edges_face_connected_at_vert(BMEdge *bme1, BMEdge *bme2) { BMLoop *l; BMIter iter; BM_ITER_ELEM (l, &iter, bme1, BM_LOOPS_OF_EDGE) { if (l->prev->e == bme2 || l->next->e == bme2) { return true; } } return false; } /** * Return a good representative face (for materials, etc.) for faces * created around/near BoundVert v. * Sometimes care about a second choice, if there is one. * If r_fother parameter is non-NULL and there is another, different, * possible frep, return the other one in that parameter. */ static BMFace *boundvert_rep_face(BoundVert *v, BMFace **r_fother) { BMFace *frep, *frep2; frep2 = NULL; if (v->ebev) { frep = v->ebev->fprev; if (v->efirst->fprev != frep) { frep2 = v->efirst->fprev; } } else if (v->efirst) { frep = v->efirst->fprev; if (frep) { if (v->elast->fnext != frep) { frep2 = v->elast->fnext; } else if (v->efirst->fnext != frep) { frep2 = v->efirst->fnext; } else if (v->elast->fprev != frep) { frep2 = v->efirst->fprev; } } else if (v->efirst->fnext) { frep = v->efirst->fnext; if (v->elast->fnext != frep) { frep2 = v->elast->fnext; } } else if (v->elast->fprev) { frep = v->elast->fprev; } } else if (v->prev->elast) { frep = v->prev->elast->fnext; if (v->next->efirst) { if (frep) { frep2 = v->next->efirst->fprev; } else { frep = v->next->efirst->fprev; } } } else { frep = NULL; } if (r_fother) { *r_fother = frep2; } return frep; } /** * Make ngon from verts alone. * Make sure to properly copy face attributes and do custom data interpolation from * corresponding elements of face_arr, if that is non-NULL, else from facerep. * If edge_arr is non-NULL, then for interpolation purposes only, the corresponding * elements of vert_arr are snapped to any non-NULL edges in that array. * If mat_nr >= 0 then the material of the face is set to that. * * \note ALL face creation goes through this function, this is important to keep! */ static BMFace *bev_create_ngon(BMesh *bm, BMVert **vert_arr, const int totv, BMFace **face_arr, BMFace *facerep, BMEdge **edge_arr, int mat_nr, bool do_interp) { BMIter iter; BMLoop *l; BMFace *f, *interp_f; BMEdge *bme; float save_co[3]; int i; f = BM_face_create_verts(bm, vert_arr, totv, facerep, BM_CREATE_NOP, true); if ((facerep || (face_arr && face_arr[0])) && f) { BM_elem_attrs_copy(bm, bm, facerep ? facerep : face_arr[0], f); if (do_interp) { i = 0; BM_ITER_ELEM (l, &iter, f, BM_LOOPS_OF_FACE) { if (face_arr) { /* Assume loops of created face are in same order as verts. */ BLI_assert(l->v == vert_arr[i]); interp_f = face_arr[i]; } else { interp_f = facerep; } if (interp_f) { bme = NULL; if (edge_arr) { bme = edge_arr[i]; } if (bme) { copy_v3_v3(save_co, l->v->co); closest_to_line_segment_v3(l->v->co, save_co, bme->v1->co, bme->v2->co); } BM_loop_interp_from_face(bm, l, interp_f, true, true); if (bme) { copy_v3_v3(l->v->co, save_co); } } i++; } } } /* Not essential for bevels own internal logic, * this is done so the operator can select newly created geometry. */ if (f) { BM_elem_flag_enable(f, BM_ELEM_TAG); BM_ITER_ELEM (bme, &iter, f, BM_EDGES_OF_FACE) { flag_out_edge(bm, bme); } } if (mat_nr >= 0) { f->mat_nr = (short)mat_nr; } return f; } static BMFace *bev_create_quad(BMesh *bm, BMVert *v1, BMVert *v2, BMVert *v3, BMVert *v4, BMFace *f1, BMFace *f2, BMFace *f3, BMFace *f4, int mat_nr) { BMVert *varr[4] = {v1, v2, v3, v4}; BMFace *farr[4] = {f1, f2, f3, f4}; return bev_create_ngon(bm, varr, 4, farr, f1, NULL, mat_nr, true); } static BMFace *bev_create_quad_ex(BMesh *bm, BMVert *v1, BMVert *v2, BMVert *v3, BMVert *v4, BMFace *f1, BMFace *f2, BMFace *f3, BMFace *f4, BMEdge *e1, BMEdge *e2, BMEdge *e3, BMEdge *e4, BMFace *frep, int mat_nr) { BMVert *varr[4] = {v1, v2, v3, v4}; BMFace *farr[4] = {f1, f2, f3, f4}; BMEdge *earr[4] = {e1, e2, e3, e4}; return bev_create_ngon(bm, varr, 4, farr, frep, earr, mat_nr, true); } /* Is Loop layer layer_index contiguous across shared vertex of l1 and l2? */ static bool contig_ldata_across_loops(BMesh *bm, BMLoop *l1, BMLoop *l2, int layer_index) { const int offset = bm->ldata.layers[layer_index].offset; const int type = bm->ldata.layers[layer_index].type; return CustomData_data_equals( type, (char *)l1->head.data + offset, (char *)l2->head.data + offset); } /* Are all loop layers with have math (e.g., UVs) * contiguous from face f1 to face f2 across edge e? */ static bool contig_ldata_across_edge(BMesh *bm, BMEdge *e, BMFace *f1, BMFace *f2) { BMLoop *lef1, *lef2; BMLoop *lv1f1, *lv1f2, *lv2f1, *lv2f2; BMVert *v1, *v2; UNUSED_VARS_NDEBUG(v1, v2); int i; if (bm->ldata.totlayer == 0) { return true; } if (!BM_edge_loop_pair(e, &lef1, &lef2)) { return false; } /* If faces are oriented consistently around e, * should now have lef1 and lef2 being f1 and f2 in either order. */ if (lef1->f == f2) { SWAP(BMLoop *, lef1, lef2); } if (lef1->f != f1 || lef2->f != f2) { return false; } v1 = lef1->v; v2 = lef2->v; BLI_assert((v1 == e->v1 && v2 == e->v2) || (v1 == e->v2 && v2 == e->v1)); lv1f1 = lef1; lv2f1 = lef1->next; lv1f2 = lef2->next; lv2f2 = lef2; BLI_assert(lv1f1->v == v1 && lv1f1->f == f1 && lv2f1->v == v2 && lv2f1->f == f1 && lv1f2->v == v1 && lv1f2->f == f2 && lv2f2->v == v2 && lv2f2->f == f2); for (i = 0; i < bm->ldata.totlayer; i++) { if (CustomData_layer_has_math(&bm->ldata, i)) { if (!contig_ldata_across_loops(bm, lv1f1, lv1f2, i) || !contig_ldata_across_loops(bm, lv2f1, lv2f2, i)) { return false; } } } return true; } /* * Set up the fields of bp->math_layer_info. * We always set has_math_layers to the correct value. * Only if there are UV layers and the number of segments is odd, * we need to calculate connected face components in UV space. */ static void math_layer_info_init(BevelParams *bp, BMesh *bm) { int i, f, stack_top, totface, current_component; int bmf_index, bmf_other_index; int *face_component; BMFace *bmf, *bmf_other; BMEdge *bme; BMFace **stack; bool *in_stack; BMIter eiter, fiter; bp->math_layer_info.has_math_layers = false; bp->math_layer_info.face_component = NULL; for (i = 0; i < bm->ldata.totlayer; i++) { if (CustomData_has_layer(&bm->ldata, CD_MLOOPUV)) { bp->math_layer_info.has_math_layers = true; break; } } if (!bp->math_layer_info.has_math_layers || (bp->seg % 2) == 0) { return; } BM_mesh_elem_index_ensure(bm, BM_FACE); BM_mesh_elem_table_ensure(bm, BM_FACE); totface = bm->totface; face_component = BLI_memarena_alloc(bp->mem_arena, totface * sizeof(int)); bp->math_layer_info.face_component = face_component; /* Use an array as a stack. Stack size can't exceed total faces if keep track of what is in * stack. */ stack = MEM_malloc_arrayN(totface, sizeof(BMFace *), __func__); in_stack = MEM_malloc_arrayN(totface, sizeof(bool), __func__); /* Set all component ids by DFS from faces with unassigned components. */ for (f = 0; f < totface; f++) { face_component[f] = -1; in_stack[f] = false; } current_component = -1; for (f = 0; f < totface; f++) { if (face_component[f] == -1 && !in_stack[f]) { stack_top = 0; current_component++; BLI_assert(stack_top < totface); stack[stack_top] = BM_face_at_index(bm, f); in_stack[f] = true; while (stack_top >= 0) { bmf = stack[stack_top]; stack_top--; bmf_index = BM_elem_index_get(bmf); in_stack[bmf_index] = false; if (face_component[bmf_index] != -1) { continue; } face_component[bmf_index] = current_component; /* Neighbors are faces that share an edge with bmf and * are where contig_ldata_across_edge(...) is true for the * shared edge and two faces. */ BM_ITER_ELEM (bme, &eiter, bmf, BM_EDGES_OF_FACE) { BM_ITER_ELEM (bmf_other, &fiter, bme, BM_FACES_OF_EDGE) { if (bmf_other != bmf) { bmf_other_index = BM_elem_index_get(bmf_other); if (face_component[bmf_other_index] != -1 || in_stack[bmf_other_index]) { continue; } if (contig_ldata_across_edge(bm, bme, bmf, bmf_other)) { stack_top++; BLI_assert(stack_top < totface); stack[stack_top] = bmf_other; in_stack[bmf_other_index] = true; } } } } } } } MEM_freeN(stack); MEM_freeN(in_stack); } /** * Use a tie-breaking rule to choose a representative face when * there are number of choices, `face[0]`, `face[1]`, ..., `face[nfaces]`. * This is needed when there are an odd number of segments, and the center * segment (and its continuation into vmesh) can usually arbitrarily be * the previous face or the next face. * Or, for the center polygon of a corner, all of the faces around * the vertex are possibleface_component choices. * If we just choose randomly, the resulting UV maps or material * assignment can look ugly/inconsistent. * Allow for the case when arguments are null. */ static BMFace *choose_rep_face(BevelParams *bp, BMFace **face, int nfaces) { int bmf_index, value_index, best_f, i; BMFace *bmf; float cent[3]; #define VEC_VALUE_LEN 6 float(*value_vecs)[VEC_VALUE_LEN] = NULL; bool *still_viable = NULL; int num_viable = 0; value_vecs = BLI_array_alloca(value_vecs, nfaces); still_viable = BLI_array_alloca(still_viable, nfaces); for (int f = 0; f < nfaces; f++) { bmf = face[f]; if (bmf == NULL) { still_viable[f] = false; continue; } still_viable[f] = true; num_viable++; bmf_index = BM_elem_index_get(bmf); value_index = 0; /* First tie-breaker: lower math-layer connected component id. */ value_vecs[f][value_index++] = bp->math_layer_info.face_component ? (float)bp->math_layer_info.face_component[bmf_index] : 0.0f; /* Next tie-breaker: selected face beats unselected one. */ value_vecs[f][value_index++] = BM_elem_flag_test(bmf, BM_ELEM_SELECT) ? 0.0f : 1.0f; /* Next tie-breaker: lower material index. */ value_vecs[f][value_index++] = bmf->mat_nr >= 0 ? (float)bmf->mat_nr : 0.0f; /* Next three tie-breakers: z, x, y components of face center. */ BM_face_calc_center_bounds(bmf, cent); value_vecs[f][value_index++] = cent[2]; value_vecs[f][value_index++] = cent[0]; value_vecs[f][value_index++] = cent[1]; BLI_assert(value_index == VEC_VALUE_LEN); } /* Look for a face that has a unique minimum value for in a value_index, * trying each value_index in turn until find a unique minimum. */ best_f = -1; for (value_index = 0; num_viable > 1 && value_index < VEC_VALUE_LEN; value_index++) { for (int f = 0; f < nfaces; f++) { if (!still_viable[f] || f == best_f) { continue; } if (best_f == -1) { best_f = f; continue; } if (value_vecs[f][value_index] < value_vecs[best_f][value_index]) { best_f = f; /* Previous f's are now not viable any more. */ for (i = f - 1; i >= 0; i--) { if (still_viable[i]) { still_viable[i] = false; num_viable--; } } } else if (value_vecs[f][value_index] > value_vecs[best_f][value_index]) { still_viable[f] = false; num_viable--; } } } if (best_f == -1) { best_f = 0; } return face[best_f]; #undef VEC_VALUE_LEN } /* Merge (using average) all the UV values for loops of v's faces. * Caller should ensure that no seams are violated by doing this. */ static void bev_merge_uvs(BMesh *bm, BMVert *v) { BMIter iter; MLoopUV *luv; BMLoop *l; float uv[2]; int n; int num_of_uv_layers = CustomData_number_of_layers(&bm->ldata, CD_MLOOPUV); int i; for (i = 0; i < num_of_uv_layers; i++) { int cd_loop_uv_offset = CustomData_get_n_offset(&bm->ldata, CD_MLOOPUV, i); if (cd_loop_uv_offset == -1) { return; } n = 0; zero_v2(uv); BM_ITER_ELEM (l, &iter, v, BM_LOOPS_OF_VERT) { luv = BM_ELEM_CD_GET_VOID_P(l, cd_loop_uv_offset); add_v2_v2(uv, luv->uv); n++; } if (n > 1) { mul_v2_fl(uv, 1.0f / (float)n); BM_ITER_ELEM (l, &iter, v, BM_LOOPS_OF_VERT) { luv = BM_ELEM_CD_GET_VOID_P(l, cd_loop_uv_offset); copy_v2_v2(luv->uv, uv); } } } } /* Merge (using average) the UV values for two specific loops of v: those for faces containing v, * and part of faces that share edge bme. */ static void bev_merge_edge_uvs(BMesh *bm, BMEdge *bme, BMVert *v) { BMIter iter; MLoopUV *luv; BMLoop *l, *l1, *l2; float uv[2]; int num_of_uv_layers = CustomData_number_of_layers(&bm->ldata, CD_MLOOPUV); int i; l1 = NULL; l2 = NULL; BM_ITER_ELEM (l, &iter, v, BM_LOOPS_OF_VERT) { if (l->e == bme) { l1 = l; } else if (l->prev->e == bme) { l2 = l; } } if (l1 == NULL || l2 == NULL) { return; } for (i = 0; i < num_of_uv_layers; i++) { int cd_loop_uv_offset = CustomData_get_n_offset(&bm->ldata, CD_MLOOPUV, i); if (cd_loop_uv_offset == -1) { return; } zero_v2(uv); luv = BM_ELEM_CD_GET_VOID_P(l1, cd_loop_uv_offset); add_v2_v2(uv, luv->uv); luv = BM_ELEM_CD_GET_VOID_P(l2, cd_loop_uv_offset); add_v2_v2(uv, luv->uv); mul_v2_fl(uv, 0.5f); luv = BM_ELEM_CD_GET_VOID_P(l1, cd_loop_uv_offset); copy_v2_v2(luv->uv, uv); luv = BM_ELEM_CD_GET_VOID_P(l2, cd_loop_uv_offset); copy_v2_v2(luv->uv, uv); } } /* Calculate coordinates of a point a distance d from v on e->e and return it in slideco. */ static void slide_dist(EdgeHalf *e, BMVert *v, float d, float r_slideco[3]) { float dir[3], len; sub_v3_v3v3(dir, v->co, BM_edge_other_vert(e->e, v)->co); len = normalize_v3(dir); if (d > len) { d = len - (float)(50.0 * BEVEL_EPSILON_D); } copy_v3_v3(r_slideco, v->co); madd_v3_v3fl(r_slideco, dir, -d); } /* Is co not on the edge e? If not, return the closer end of e in ret_closer_v. */ static bool is_outside_edge(EdgeHalf *e, const float co[3], BMVert **ret_closer_v) { float h[3], u[3], lambda, lenu, *l1 = e->e->v1->co; sub_v3_v3v3(u, e->e->v2->co, l1); sub_v3_v3v3(h, co, l1); lenu = normalize_v3(u); lambda = dot_v3v3(u, h); if (lambda <= -BEVEL_EPSILON_BIG * lenu) { *ret_closer_v = e->e->v1; return true; } if (lambda >= (1.0f + BEVEL_EPSILON_BIG) * lenu) { *ret_closer_v = e->e->v2; return true; } return false; } /* Return whether the angle is less than, equal to, or larger than 180 degrees. */ static int edges_angle_kind(EdgeHalf *e1, EdgeHalf *e2, BMVert *v) { BMVert *v1, *v2; float dir1[3], dir2[3], cross[3], *no, dot; v1 = BM_edge_other_vert(e1->e, v); v2 = BM_edge_other_vert(e2->e, v); sub_v3_v3v3(dir1, v->co, v1->co); sub_v3_v3v3(dir2, v->co, v2->co); normalize_v3(dir1); normalize_v3(dir2); /* Angles are in [0,pi]. Need to compare cross product with normal to see if they are reflex. */ cross_v3_v3v3(cross, dir1, dir2); normalize_v3(cross); if (e1->fnext) { no = e1->fnext->no; } else if (e2->fprev) { no = e2->fprev->no; } else { no = v->no; } dot = dot_v3v3(cross, no); if (fabsf(dot) < BEVEL_EPSILON_BIG) { return ANGLE_STRAIGHT; } if (dot < 0.0f) { return ANGLE_LARGER; } return ANGLE_SMALLER; } /* co should be approximately on the plane between e1 and e2, which share common vert v and common * face f (which cannot be NULL). Is it between those edges, sweeping CCW? */ static bool point_between_edges(float co[3], BMVert *v, BMFace *f, EdgeHalf *e1, EdgeHalf *e2) { BMVert *v1, *v2; float dir1[3], dir2[3], dirco[3], no[3]; float ang11, ang1co; v1 = BM_edge_other_vert(e1->e, v); v2 = BM_edge_other_vert(e2->e, v); sub_v3_v3v3(dir1, v->co, v1->co); sub_v3_v3v3(dir2, v->co, v2->co); sub_v3_v3v3(dirco, v->co, co); normalize_v3(dir1); normalize_v3(dir2); normalize_v3(dirco); ang11 = angle_normalized_v3v3(dir1, dir2); ang1co = angle_normalized_v3v3(dir1, dirco); /* Angles are in [0,pi]. Need to compare cross product with normal to see if they are reflex. */ cross_v3_v3v3(no, dir1, dir2); if (dot_v3v3(no, f->no) < 0.0f) { ang11 = (float)(M_PI * 2.0) - ang11; } cross_v3_v3v3(no, dir1, dirco); if (dot_v3v3(no, f->no) < 0.0f) { ang1co = (float)(M_PI * 2.0) - ang1co; } return (ang11 - ang1co > -BEVEL_EPSILON_ANG); } /** * Calculate the meeting point between the offset edges for e1 and e2, putting answer in meetco. * e1 and e2 share vertex v and face f (may be NULL) and viewed from the normal side of * the bevel vertex, e1 precedes e2 in CCW order. * Offset edge is on right of both edges, where e1 enters v and e2 leave it. * When offsets are equal, the new point is on the edge bisector, with length offset/sin(angle/2), * but if the offsets are not equal (we allow for because the bevel modifier has edge weights that * may lead to different offsets) then the meeting point can be found by intersecting offset lines. * If making the meeting point significantly changes the left or right offset from the user spec, * record the change in offset_l (or offset_r); later we can tell that a change has happened * because the offset will differ from its original value in offset_l_spec (or offset_r_spec). * * \param edges_between: If this is true, there are edges between e1 and e2 in CCW order so they * don't share a common face. We want the meeting point to be on an existing face so it * should be dropped onto one of the intermediate faces, if possible. * \param e_in_plane: If we need to drop from the calculated offset lines to one of the faces, * we don't want to drop onto the 'in plane' face, so if this is not null skip this edge's faces. */ static void offset_meet(EdgeHalf *e1, EdgeHalf *e2, BMVert *v, BMFace *f, bool edges_between, float meetco[3], const EdgeHalf *e_in_plane) { float dir1[3], dir2[3], dir1n[3], dir2p[3], norm_v[3], norm_v1[3], norm_v2[3]; float norm_perp1[3], norm_perp2[3], off1a[3], off1b[3], off2a[3], off2b[3]; float isect2[3], dropco[3], plane[4]; float ang, d; BMVert *closer_v; EdgeHalf *e, *e1next, *e2prev; BMFace *fnext; int isect_kind; /* Get direction vectors for two offset lines. */ sub_v3_v3v3(dir1, v->co, BM_edge_other_vert(e1->e, v)->co); sub_v3_v3v3(dir2, BM_edge_other_vert(e2->e, v)->co, v->co); if (edges_between) { e1next = e1->next; e2prev = e2->prev; sub_v3_v3v3(dir1n, BM_edge_other_vert(e1next->e, v)->co, v->co); sub_v3_v3v3(dir2p, v->co, BM_edge_other_vert(e2prev->e, v)->co); } else { /* Shut up 'maybe unused' warnings. */ zero_v3(dir1n); zero_v3(dir2p); } ang = angle_v3v3(dir1, dir2); if (ang < BEVEL_EPSILON_ANG) { /* Special case: e1 and e2 are parallel; put offset point perp to both, from v. * need to find a suitable plane. * This code used to just use offset and dir1, but that makes for visible errors * on a circle with > 200 sides, which trips this "nearly perp" code (see T61214). * so use the average of the two, and the offset formula for angle bisector. * If offsets are different, we're out of luck: * Use the max of the two (so get consistent looking results if the same situation * arises elsewhere in the object but with opposite roles for e1 and e2. */ if (f) { copy_v3_v3(norm_v, f->no); } else { copy_v3_v3(norm_v, v->no); } add_v3_v3(dir1, dir2); cross_v3_v3v3(norm_perp1, dir1, norm_v); normalize_v3(norm_perp1); copy_v3_v3(off1a, v->co); d = max_ff(e1->offset_r, e2->offset_l); d = d / cosf(ang / 2.0f); madd_v3_v3fl(off1a, norm_perp1, d); copy_v3_v3(meetco, off1a); } else if (fabsf(ang - (float)M_PI) < BEVEL_EPSILON_ANG) { /* Special case: e1 and e2 are antiparallel, so bevel is into a zero-area face. * Just make the offset point on the common line, at offset distance from v. */ d = max_ff(e1->offset_r, e2->offset_l); slide_dist(e2, v, d, meetco); } else { /* Get normal to plane where meet point should be, using cross product instead of f->no * in case f is non-planar. * Except: sometimes locally there can be a small angle between dir1 and dir2 that leads * to a normal that is actually almost perpendicular to the face normal; * in this case it looks wrong to use the local (cross-product) normal, so use the face normal * if the angle between dir1 and dir2 is smallish. * If e1-v-e2 is a reflex angle (viewed from vertex normal side), need to flip. * Use f->no to figure out which side to look at angle from, as even if f is non-planar, * will be more accurate than vertex normal. */ if (f && ang < BEVEL_SMALL_ANG) { copy_v3_v3(norm_v1, f->no); copy_v3_v3(norm_v2, f->no); } else if (!edges_between) { cross_v3_v3v3(norm_v1, dir2, dir1); normalize_v3(norm_v1); if (dot_v3v3(norm_v1, f ? f->no : v->no) < 0.0f) { negate_v3(norm_v1); } copy_v3_v3(norm_v2, norm_v1); } else { /* Separate faces; get face norms at corners for each separately. */ cross_v3_v3v3(norm_v1, dir1n, dir1); normalize_v3(norm_v1); f = e1->fnext; if (dot_v3v3(norm_v1, f ? f->no : v->no) < 0.0f) { negate_v3(norm_v1); } cross_v3_v3v3(norm_v2, dir2, dir2p); normalize_v3(norm_v2); f = e2->fprev; if (dot_v3v3(norm_v2, f ? f->no : v->no) < 0.0f) { negate_v3(norm_v2); } } /* Get vectors perp to each edge, perp to norm_v, and pointing into face. */ cross_v3_v3v3(norm_perp1, dir1, norm_v1); cross_v3_v3v3(norm_perp2, dir2, norm_v2); normalize_v3(norm_perp1); normalize_v3(norm_perp2); /* Get points that are offset distances from each line, then another point on each line. */ copy_v3_v3(off1a, v->co); madd_v3_v3fl(off1a, norm_perp1, e1->offset_r); add_v3_v3v3(off1b, off1a, dir1); copy_v3_v3(off2a, v->co); madd_v3_v3fl(off2a, norm_perp2, e2->offset_l); add_v3_v3v3(off2b, off2a, dir2); /* Intersect the offset lines. */ isect_kind = isect_line_line_v3(off1a, off1b, off2a, off2b, meetco, isect2); if (isect_kind == 0) { /* Lines are collinear: we already tested for this, but this used a different epsilon. */ copy_v3_v3(meetco, off1a); /* Just to do something. */ } else { /* The lines intersect, but is it at a reasonable place? * One problem to check: if one of the offsets is 0, then we don't want an intersection * that is outside that edge itself. This can happen if angle between them is > 180 degrees, * or if the offset amount is > the edge length. */ if (e1->offset_r == 0.0f && is_outside_edge(e1, meetco, &closer_v)) { copy_v3_v3(meetco, closer_v->co); } if (e2->offset_l == 0.0f && is_outside_edge(e2, meetco, &closer_v)) { copy_v3_v3(meetco, closer_v->co); } if (edges_between && e1->offset_r > 0.0f && e2->offset_l > 0.0f) { /* Try to drop meetco to a face between e1 and e2. */ if (isect_kind == 2) { /* Lines didn't meet in 3d: get average of meetco and isect2. */ mid_v3_v3v3(meetco, meetco, isect2); } for (e = e1; e != e2; e = e->next) { fnext = e->fnext; if (!fnext) { continue; } plane_from_point_normal_v3(plane, v->co, fnext->no); closest_to_plane_normalized_v3(dropco, plane, meetco); /* Don't drop to the faces next to the in plane edge. */ if (e_in_plane) { ang = angle_v3v3(fnext->no, e_in_plane->fnext->no); if ((fabsf(ang) < BEVEL_SMALL_ANG) || (fabsf(ang - (float)M_PI) < BEVEL_SMALL_ANG)) { continue; } } if (point_between_edges(dropco, v, fnext, e, e->next)) { copy_v3_v3(meetco, dropco); break; } } } } } } /* Chosen so 1/sin(BEVEL_GOOD_ANGLE) is about 4, giving that expansion factor to bevel width. */ #define BEVEL_GOOD_ANGLE 0.25f /** * Calculate the meeting point between e1 and e2 (one of which should have zero offsets), * where \a e1 precedes \a e2 in CCW order around their common vertex \a v * (viewed from normal side). * If \a r_angle is provided, return the angle between \a e and \a meetco in `*r_angle`. * If the angle is 0, or it is 180 degrees or larger, there will be no meeting point; * return false in that case, else true. */ static bool offset_meet_edge( EdgeHalf *e1, EdgeHalf *e2, BMVert *v, float meetco[3], float *r_angle) { float dir1[3], dir2[3], fno[3], ang, sinang; sub_v3_v3v3(dir1, BM_edge_other_vert(e1->e, v)->co, v->co); sub_v3_v3v3(dir2, BM_edge_other_vert(e2->e, v)->co, v->co); normalize_v3(dir1); normalize_v3(dir2); /* Find angle from dir1 to dir2 as viewed from vertex normal side. */ ang = angle_normalized_v3v3(dir1, dir2); if (fabsf(ang) < BEVEL_GOOD_ANGLE) { if (r_angle) { *r_angle = 0.0f; } return false; } cross_v3_v3v3(fno, dir1, dir2); if (dot_v3v3(fno, v->no) < 0.0f) { ang = 2.0f * (float)M_PI - ang; /* Angle is reflex. */ if (r_angle) { *r_angle = ang; } return false; } if (r_angle) { *r_angle = ang; } if (fabsf(ang - (float)M_PI) < BEVEL_GOOD_ANGLE) { return false; } sinang = sinf(ang); copy_v3_v3(meetco, v->co); if (e1->offset_r == 0.0f) { madd_v3_v3fl(meetco, dir1, e2->offset_l / sinang); } else { madd_v3_v3fl(meetco, dir2, e1->offset_r / sinang); } return true; } /** * Return true if it will look good to put the meeting point where offset_on_edge_between * would put it. This means that neither side sees a reflex angle. */ static bool good_offset_on_edge_between(EdgeHalf *e1, EdgeHalf *e2, EdgeHalf *emid, BMVert *v) { float ang; float meet[3]; return offset_meet_edge(e1, emid, v, meet, &ang) && offset_meet_edge(emid, e2, v, meet, &ang); } /** * Calculate the best place for a meeting point for the offsets from edges e1 and e2 on the * in-between edge emid. Viewed from the vertex normal side, the CCW order of these edges is e1, * emid, e2. Return true if we placed meetco as compromise between where two edges met. If we did, * put the ratio of sines of angles in *r_sinratio too. */ static bool offset_on_edge_between( EdgeHalf *e1, EdgeHalf *e2, EdgeHalf *emid, BMVert *v, float meetco[3], float *r_sinratio) { float ang1, ang2; float meet1[3], meet2[3]; bool ok1, ok2; bool retval = false; BLI_assert(e1->is_bev && e2->is_bev && !emid->is_bev); ok1 = offset_meet_edge(e1, emid, v, meet1, &ang1); ok2 = offset_meet_edge(emid, e2, v, meet2, &ang2); if (ok1 && ok2) { mid_v3_v3v3(meetco, meet1, meet2); if (r_sinratio) { /* ang1 should not be 0, but be paranoid. */ *r_sinratio = (ang1 == 0.0f) ? 1.0f : sinf(ang2) / sinf(ang1); } retval = true; } else if (ok1 && !ok2) { copy_v3_v3(meetco, meet1); } else if (!ok1 && ok2) { copy_v3_v3(meetco, meet2); } else { /* Neither offset line met emid. * This should only happen if all three lines are on top of each other. */ slide_dist(emid, v, e1->offset_r, meetco); } return retval; } /* Offset by e->offset in plane with normal plane_no, on left if left==true, else on right. * If plane_no is NULL, choose an arbitrary plane different from eh's direction. */ static void offset_in_plane(EdgeHalf *e, const float plane_no[3], bool left, float r_co[3]) { float dir[3], no[3], fdir[3]; BMVert *v; v = e->is_rev ? e->e->v2 : e->e->v1; sub_v3_v3v3(dir, BM_edge_other_vert(e->e, v)->co, v->co); normalize_v3(dir); if (plane_no) { copy_v3_v3(no, plane_no); } else { zero_v3(no); if (fabsf(dir[0]) < fabsf(dir[1])) { no[0] = 1.0f; } else { no[1] = 1.0f; } } if (left) { cross_v3_v3v3(fdir, dir, no); } else { cross_v3_v3v3(fdir, no, dir); } normalize_v3(fdir); copy_v3_v3(r_co, v->co); madd_v3_v3fl(r_co, fdir, left ? e->offset_l : e->offset_r); } /* Calculate the point on e where line (co_a, co_b) comes closest to and return it in projco. */ static void project_to_edge(const BMEdge *e, const float co_a[3], const float co_b[3], float projco[3]) { float otherco[3]; if (!isect_line_line_v3(e->v1->co, e->v2->co, co_a, co_b, projco, otherco)) { #ifdef BEVEL_ASSERT_PROJECT BLI_assert(!"project meet failure"); #endif copy_v3_v3(projco, e->v1->co); } } /* If there is a bndv->ebev edge, find the mid control point if necessary. * It is the closest point on the beveled edge to the line segment between bndv and bndv->next. */ static void set_profile_params(BevelParams *bp, BevVert *bv, BoundVert *bndv) { float start[3], end[3], co3[3], d1[3], d2[3]; bool do_linear_interp = true; EdgeHalf *e = bndv->ebev; Profile *pro = &bndv->profile; copy_v3_v3(start, bndv->nv.co); copy_v3_v3(end, bndv->next->nv.co); if (e) { do_linear_interp = false; pro->super_r = bp->pro_super_r; /* Projection direction is direction of the edge. */ sub_v3_v3v3(pro->proj_dir, e->e->v1->co, e->e->v2->co); if (e->is_rev) { negate_v3(pro->proj_dir); } normalize_v3(pro->proj_dir); project_to_edge(e->e, start, end, pro->middle); copy_v3_v3(pro->start, start); copy_v3_v3(pro->end, end); /* Default plane to project onto is the one with triangle start - middle - end in it. */ sub_v3_v3v3(d1, pro->middle, start); sub_v3_v3v3(d2, pro->middle, end); normalize_v3(d1); normalize_v3(d2); cross_v3_v3v3(pro->plane_no, d1, d2); normalize_v3(pro->plane_no); if (nearly_parallel(d1, d2)) { /* Start - middle - end are collinear. * It should be the case that beveled edge is coplanar with two boundary verts. * We want to move the profile to that common plane, if possible. * That makes the multi-segment bevels curve nicely in that plane, as users expect. * The new middle should be either v (when neighbor edges are unbeveled) * or the intersection of the offset lines (if they are). * If the profile is going to lead into unbeveled edges on each side * (that is, both BoundVerts are "on-edge" points on non-beveled edges). */ copy_v3_v3(pro->middle, bv->v->co); if (e->prev->is_bev && e->next->is_bev && bv->selcount >= 3) { /* Want mid at the meet point of next and prev offset edges. */ float d3[3], d4[3], co4[3], meetco[3], isect2[3]; int isect_kind; sub_v3_v3v3(d3, e->prev->e->v1->co, e->prev->e->v2->co); sub_v3_v3v3(d4, e->next->e->v1->co, e->next->e->v2->co); normalize_v3(d3); normalize_v3(d4); if (nearly_parallel(d3, d4)) { /* Offset lines are collinear - want linear interpolation. */ mid_v3_v3v3(pro->middle, start, end); do_linear_interp = true; } else { add_v3_v3v3(co3, start, d3); add_v3_v3v3(co4, end, d4); isect_kind = isect_line_line_v3(start, co3, end, co4, meetco, isect2); if (isect_kind != 0) { copy_v3_v3(pro->middle, meetco); } else { /* Offset lines don't intersect - want linear interpolation. */ mid_v3_v3v3(pro->middle, start, end); do_linear_interp = true; } } } copy_v3_v3(pro->end, end); sub_v3_v3v3(d1, pro->middle, start); normalize_v3(d1); sub_v3_v3v3(d2, pro->middle, end); normalize_v3(d2); cross_v3_v3v3(pro->plane_no, d1, d2); normalize_v3(pro->plane_no); if (nearly_parallel(d1, d2)) { /* Whole profile is collinear with edge: just interpolate. */ do_linear_interp = true; } else { copy_v3_v3(pro->plane_co, bv->v->co); copy_v3_v3(pro->proj_dir, pro->plane_no); } } copy_v3_v3(pro->plane_co, start); } else if (bndv->is_arc_start) { /* Assume pro->middle was already set. */ copy_v3_v3(pro->start, start); copy_v3_v3(pro->end, end); pro->super_r = PRO_CIRCLE_R; zero_v3(pro->plane_co); zero_v3(pro->plane_no); zero_v3(pro->proj_dir); do_linear_interp = false; } else if (bp->affect_type == BEVEL_AFFECT_VERTICES) { copy_v3_v3(pro->start, start); copy_v3_v3(pro->middle, bv->v->co); copy_v3_v3(pro->end, end); pro->super_r = bp->pro_super_r; zero_v3(pro->plane_co); zero_v3(pro->plane_no); zero_v3(pro->proj_dir); do_linear_interp = false; } if (do_linear_interp) { pro->super_r = PRO_LINE_R; copy_v3_v3(pro->start, start); copy_v3_v3(pro->end, end); mid_v3_v3v3(pro->middle, start, end); /* Won't use projection for this line profile. */ zero_v3(pro->plane_co); zero_v3(pro->plane_no); zero_v3(pro->proj_dir); } } /** * Maybe move the profile plane for bndv->ebev to the plane its profile's start, and the * original beveled vert, bmv. This will usually be the plane containing its adjacent * non-beveled edges, but sometimes the start and the end are not on those edges. * * Currently just used in #build_boundary_terminal_edge. */ static void move_profile_plane(BoundVert *bndv, BMVert *bmvert) { float d1[3], d2[3], no[3], no2[3], no3[3], dot2, dot3; Profile *pro = &bndv->profile; /* Only do this if projecting, and start, end, and proj_dir are not coplanar. */ if (is_zero_v3(pro->proj_dir)) { return; } sub_v3_v3v3(d1, bmvert->co, pro->start); normalize_v3(d1); sub_v3_v3v3(d2, bmvert->co, pro->end); normalize_v3(d2); cross_v3_v3v3(no, d1, d2); cross_v3_v3v3(no2, d1, pro->proj_dir); cross_v3_v3v3(no3, d2, pro->proj_dir); if (normalize_v3(no) > BEVEL_EPSILON_BIG && normalize_v3(no2) > BEVEL_EPSILON_BIG && normalize_v3(no3) > BEVEL_EPSILON_BIG) { dot2 = dot_v3v3(no, no2); dot3 = dot_v3v3(no, no3); if (fabsf(dot2) < (1 - BEVEL_EPSILON_BIG) && fabsf(dot3) < (1 - BEVEL_EPSILON_BIG)) { copy_v3_v3(bndv->profile.plane_no, no); } } /* We've changed the parameters from their defaults, so don't recalculate them later. */ pro->special_params = true; } /** * Move the profile plane for the two BoundVerts involved in a weld. * We want the plane that is most likely to have the intersections of the * two edges' profile projections on it. bndv1 and bndv2 are by construction the * intersection points of the outside parts of the profiles. * The original vertex should form a third point of the desired plane. */ static void move_weld_profile_planes(BevVert *bv, BoundVert *bndv1, BoundVert *bndv2) { float d1[3], d2[3], no[3], no2[3], no3[3], dot1, dot2, l1, l2, l3; /* Only do this if projecting, and d1, d2, and proj_dir are not coplanar. */ if (is_zero_v3(bndv1->profile.proj_dir) || is_zero_v3(bndv2->profile.proj_dir)) { return; } sub_v3_v3v3(d1, bv->v->co, bndv1->nv.co); sub_v3_v3v3(d2, bv->v->co, bndv2->nv.co); cross_v3_v3v3(no, d1, d2); l1 = normalize_v3(no); /* "no" is new normal projection plane, but don't move if it is coplanar with both of the * projection dirs. */ cross_v3_v3v3(no2, d1, bndv1->profile.proj_dir); l2 = normalize_v3(no2); cross_v3_v3v3(no3, d2, bndv2->profile.proj_dir); l3 = normalize_v3(no3); if (l1 > BEVEL_EPSILON && (l2 > BEVEL_EPSILON || l3 > BEVEL_EPSILON)) { dot1 = fabsf(dot_v3v3(no, no2)); dot2 = fabsf(dot_v3v3(no, no3)); if (fabsf(dot1 - 1.0f) > BEVEL_EPSILON) { copy_v3_v3(bndv1->profile.plane_no, no); } if (fabsf(dot2 - 1.0f) > BEVEL_EPSILON) { copy_v3_v3(bndv2->profile.plane_no, no); } } /* We've changed the parameters from their defaults, so don't recalculate them later. */ bndv1->profile.special_params = true; bndv2->profile.special_params = true; } /* Return 1 if a and b are in CCW order on the normal side of f, * and -1 if they are reversed, and 0 if there is no shared face f. */ static int bev_ccw_test(BMEdge *a, BMEdge *b, BMFace *f) { BMLoop *la, *lb; if (!f) { return 0; } la = BM_face_edge_share_loop(f, a); lb = BM_face_edge_share_loop(f, b); if (!la || !lb) { return 0; } return lb->next == la ? 1 : -1; } /** * Fill matrix r_mat so that a point in the sheared parallelogram with corners * va, vmid, vb (and the 4th that is implied by it being a parallelogram) * is the result of transforming the unit square by multiplication with r_mat. * If it can't be done because the parallelogram is degenerate, return false, * else return true. * Method: * Find vo, the origin of the parallelogram with other three points va, vmid, vb. * Also find vd, which is in direction normal to parallelogram and 1 unit away * from the origin. * The quarter circle in first quadrant of unit square will be mapped to the * quadrant of a sheared ellipse in the parallelogram, using a matrix. * The matrix mat is calculated to map: * (0,1,0) -> va * (1,1,0) -> vmid * (1,0,0) -> vb * (0,1,1) -> vd * We want M to make M*A=B where A has the left side above, as columns * and B has the right side as columns - both extended into homogeneous coords. * So M = B*(Ainverse). Doing Ainverse by hand gives the code below. */ static bool make_unit_square_map(const float va[3], const float vmid[3], const float vb[3], float r_mat[4][4]) { float vo[3], vd[3], vb_vmid[3], va_vmid[3], vddir[3]; sub_v3_v3v3(va_vmid, vmid, va); sub_v3_v3v3(vb_vmid, vmid, vb); if (is_zero_v3(va_vmid) || is_zero_v3(vb_vmid)) { return false; } if (fabsf(angle_v3v3(va_vmid, vb_vmid) - (float)M_PI) <= BEVEL_EPSILON_ANG) { return false; } sub_v3_v3v3(vo, va, vb_vmid); cross_v3_v3v3(vddir, vb_vmid, va_vmid); normalize_v3(vddir); add_v3_v3v3(vd, vo, vddir); /* The cols of m are: {vmid - va, vmid - vb, vmid + vd - va -vb, va + vb - vmid; * Blender transform matrices are stored such that m[i][*] is ith column; * the last elements of each col remain as they are in unity matrix. */ sub_v3_v3v3(&r_mat[0][0], vmid, va); r_mat[0][3] = 0.0f; sub_v3_v3v3(&r_mat[1][0], vmid, vb); r_mat[1][3] = 0.0f; add_v3_v3v3(&r_mat[2][0], vmid, vd); sub_v3_v3(&r_mat[2][0], va); sub_v3_v3(&r_mat[2][0], vb); r_mat[2][3] = 0.0f; add_v3_v3v3(&r_mat[3][0], va, vb); sub_v3_v3(&r_mat[3][0], vmid); r_mat[3][3] = 1.0f; return true; } /** * Like make_unit_square_map, but this one makes a matrix that transforms the * (1,1,1) corner of a unit cube into an arbitrary corner with corner vert d * and verts around it a, b, c (in ccw order, viewed from d normal dir). * The matrix mat is calculated to map: * (1,0,0) -> va * (0,1,0) -> vb * (0,0,1) -> vc * (1,1,1) -> vd * We want M to make M*A=B where A has the left side above, as columns * and B has the right side as columns - both extended into homogeneous coords. * So M = B*(Ainverse). Doing Ainverse by hand gives the code below. * The cols of M are 1/2{va-vb+vc-vd}, 1/2{-va+vb-vc+vd}, 1/2{-va-vb+vc+vd}, * and 1/2{va+vb+vc-vd} * and Blender matrices have cols at m[i][*]. */ static void make_unit_cube_map( const float va[3], const float vb[3], const float vc[3], const float vd[3], float r_mat[4][4]) { copy_v3_v3(r_mat[0], va); sub_v3_v3(r_mat[0], vb); sub_v3_v3(r_mat[0], vc); add_v3_v3(r_mat[0], vd); mul_v3_fl(r_mat[0], 0.5f); r_mat[0][3] = 0.0f; copy_v3_v3(r_mat[1], vb); sub_v3_v3(r_mat[1], va); sub_v3_v3(r_mat[1], vc); add_v3_v3(r_mat[1], vd); mul_v3_fl(r_mat[1], 0.5f); r_mat[1][3] = 0.0f; copy_v3_v3(r_mat[2], vc); sub_v3_v3(r_mat[2], va); sub_v3_v3(r_mat[2], vb); add_v3_v3(r_mat[2], vd); mul_v3_fl(r_mat[2], 0.5f); r_mat[2][3] = 0.0f; copy_v3_v3(r_mat[3], va); add_v3_v3(r_mat[3], vb); add_v3_v3(r_mat[3], vc); sub_v3_v3(r_mat[3], vd); mul_v3_fl(r_mat[3], 0.5f); r_mat[3][3] = 1.0f; } /** * Get the coordinate on the superellipse (x^r + y^r = 1), at parameter value x * (or, if !rbig, mirrored (y=x)-line). * rbig should be true if r > 1.0 and false if <= 1.0. * Assume r > 0.0. */ static double superellipse_co(double x, float r, bool rbig) { BLI_assert(r > 0.0f); /* If r<1, mirror the superellipse function by (y=x)-line to get a numerically stable range * Possible because of symmetry, later mirror back. */ if (rbig) { return pow((1.0 - pow(x, r)), (1.0 / r)); } return 1.0 - pow((1.0 - pow(1.0 - x, r)), (1.0 / r)); } /** * Find the point on given profile at parameter i which goes from 0 to nseg as * the profile moves from pro->start to pro->end. * We assume that nseg is either the global seg number or a power of 2 less than * or equal to the power of 2 >= seg. * In the latter case, we subsample the profile for seg_2, which will not necessarily * give equal spaced chords, but is in fact more what is desired by the cubic subdivision * method used to make the vmesh pattern. */ static void get_profile_point(BevelParams *bp, const Profile *pro, int i, int nseg, float r_co[3]) { int subsample_spacing; if (bp->seg == 1) { if (i == 0) { copy_v3_v3(r_co, pro->start); } else { copy_v3_v3(r_co, pro->end); } } else { if (nseg == bp->seg) { BLI_assert(pro->prof_co != NULL); copy_v3_v3(r_co, pro->prof_co + 3 * i); } else { BLI_assert(is_power_of_2_i(nseg) && nseg <= bp->pro_spacing.seg_2); /* Find spacing between subsamples in prof_co_2. */ subsample_spacing = bp->pro_spacing.seg_2 / nseg; copy_v3_v3(r_co, pro->prof_co_2 + 3 * i * subsample_spacing); } } } /** * Calculate the actual coordinate values for bndv's profile. * This is only needed if bp->seg > 1. * Allocate the space for them if that hasn't been done already. * If bp->seg is not a power of 2, also need to calculate * the coordinate values for the power of 2 >= bp->seg, because the ADJ pattern needs power-of-2 * boundaries during construction. */ static void calculate_profile(BevelParams *bp, BoundVert *bndv, bool reversed, bool miter) { int i, k, ns; const double *xvals, *yvals; float co[3], co2[3], p[3], map[4][4], bottom_corner[3], top_corner[3]; float *prof_co, *prof_co_k; float r; bool need_2, map_ok; Profile *pro = &bndv->profile; ProfileSpacing *pro_spacing = (miter) ? &bp->pro_spacing_miter : &bp->pro_spacing; if (bp->seg == 1) { return; } need_2 = bp->seg != bp->pro_spacing.seg_2; if (!pro->prof_co) { pro->prof_co = (float *)BLI_memarena_alloc(bp->mem_arena, ((size_t)bp->seg + 1) * 3 * sizeof(float)); if (need_2) { pro->prof_co_2 = (float *)BLI_memarena_alloc( bp->mem_arena, ((size_t)bp->pro_spacing.seg_2 + 1) * 3 * sizeof(float)); } else { pro->prof_co_2 = pro->prof_co; } } r = pro->super_r; if (bp->profile_type == BEVEL_PROFILE_SUPERELLIPSE && r == PRO_LINE_R) { map_ok = false; } else { map_ok = make_unit_square_map(pro->start, pro->middle, pro->end, map); } if (bp->vmesh_method == BEVEL_VMESH_CUTOFF && map_ok) { /* Calculate the "height" of the profile by putting the (0,0) and (1,1) corners of the * un-transformed profile through the 2D->3D map and calculating the distance between them. */ zero_v3(p); mul_v3_m4v3(bottom_corner, map, p); p[0] = 1.0f; p[1] = 1.0f; mul_v3_m4v3(top_corner, map, p); pro->height = len_v3v3(bottom_corner, top_corner); } /* The first iteration is the nseg case, the second is the seg_2 case (if it's needed) .*/ for (i = 0; i < 2; i++) { if (i == 0) { ns = bp->seg; xvals = pro_spacing->xvals; yvals = pro_spacing->yvals; prof_co = pro->prof_co; } else { if (!need_2) { break; /* Shares coords with pro->prof_co. */ } ns = bp->pro_spacing.seg_2; xvals = pro_spacing->xvals_2; yvals = pro_spacing->yvals_2; prof_co = pro->prof_co_2; } /* Iterate over the vertices along the boundary arc. */ for (k = 0; k <= ns; k++) { if (k == 0) { copy_v3_v3(co, pro->start); } else if (k == ns) { copy_v3_v3(co, pro->end); } else { if (map_ok) { p[0] = reversed ? (float)yvals[ns - k] : (float)xvals[k]; p[1] = reversed ? (float)xvals[ns - k] : (float)yvals[k]; p[2] = 0.0f; /* Do the 2D->3D transformation of the profile coordinates. */ mul_v3_m4v3(co, map, p); } else { interp_v3_v3v3(co, pro->start, pro->end, (float)k / (float)ns); } } /* Finish the 2D->3D transformation by projecting onto the final profile plane. */ prof_co_k = prof_co + 3 * k; /* Each coord takes up 3 spaces. */ if (!is_zero_v3(pro->proj_dir)) { add_v3_v3v3(co2, co, pro->proj_dir); /* pro->plane_co and pro->plane_no are filled in "set_profile_params". */ if (!isect_line_plane_v3(prof_co_k, co, co2, pro->plane_co, pro->plane_no)) { /* Shouldn't happen. */ copy_v3_v3(prof_co_k, co); } } else { copy_v3_v3(prof_co_k, co); } } } } /** * Snap a direction co to a superellipsoid with parameter super_r. * For square profiles, midline says whether or not to snap to both planes. * * Only currently used for the pipe and cube corner special cases. */ static void snap_to_superellipsoid(float co[3], const float super_r, bool midline) { float a, b, c, x, y, z, r, rinv, dx, dy; r = super_r; if (r == PRO_CIRCLE_R) { normalize_v3(co); return; } x = a = max_ff(0.0f, co[0]); y = b = max_ff(0.0f, co[1]); z = c = max_ff(0.0f, co[2]); if (r == PRO_SQUARE_R || r == PRO_SQUARE_IN_R) { /* Will only be called for 2d profile. */ BLI_assert(fabsf(z) < BEVEL_EPSILON); z = 0.0f; x = min_ff(1.0f, x); y = min_ff(1.0f, y); if (r == PRO_SQUARE_R) { /* Snap to closer of x==1 and y==1 lines, or maybe both. */ dx = 1.0f - x; dy = 1.0f - y; if (dx < dy) { x = 1.0f; y = midline ? 1.0f : y; } else { y = 1.0f; x = midline ? 1.0f : x; } } else { /* Snap to closer of x==0 and y==0 lines, or maybe both. */ if (x < y) { x = 0.0f; y = midline ? 0.0f : y; } else { y = 0.0f; x = midline ? 0.0f : x; } } } else { rinv = 1.0f / r; if (a == 0.0f) { if (b == 0.0f) { x = 0.0f; y = 0.0f; z = powf(c, rinv); } else { x = 0.0f; y = powf(1.0f / (1.0f + powf(c / b, r)), rinv); z = c * y / b; } } else { x = powf(1.0f / (1.0f + powf(b / a, r) + powf(c / a, r)), rinv); y = b * x / a; z = c * x / a; } } co[0] = x; co[1] = y; co[2] = z; } #define BEV_EXTEND_EDGE_DATA_CHECK(eh, flag) (BM_elem_flag_test(eh->e, flag)) static void check_edge_data_seam_sharp_edges(BevVert *bv, int flag, bool neg) { EdgeHalf *e = &bv->edges[0], *efirst = &bv->edges[0]; /* First first edge with seam or sharp edge data. */ while ((!neg && !BEV_EXTEND_EDGE_DATA_CHECK(e, flag)) || (neg && BEV_EXTEND_EDGE_DATA_CHECK(e, flag))) { e = e->next; if (e == efirst) { break; } } /* If no such edge found, return. */ if ((!neg && !BEV_EXTEND_EDGE_DATA_CHECK(e, flag)) || (neg && BEV_EXTEND_EDGE_DATA_CHECK(e, flag))) { return; } /* Set efirst to this first encountered edge. */ efirst = e; do { int flag_count = 0; EdgeHalf *ne = e->next; while (((!neg && !BEV_EXTEND_EDGE_DATA_CHECK(ne, flag)) || (neg && BEV_EXTEND_EDGE_DATA_CHECK(ne, flag))) && ne != efirst) { if (ne->is_bev) { flag_count++; } ne = ne->next; } if (ne == e || (ne == efirst && ((!neg && !BEV_EXTEND_EDGE_DATA_CHECK(efirst, flag)) || (neg && BEV_EXTEND_EDGE_DATA_CHECK(efirst, flag))))) { break; } /* Set seam_len / sharp_len of starting edge. */ if (flag == BM_ELEM_SEAM) { e->rightv->seam_len = flag_count; } else if (flag == BM_ELEM_SMOOTH) { e->rightv->sharp_len = flag_count; } e = ne; } while (e != efirst); } static void bevel_extend_edge_data(BevVert *bv) { VMesh *vm = bv->vmesh; if (vm->mesh_kind == M_TRI_FAN) { return; } BoundVert *bcur = bv->vmesh->boundstart, *start = bcur; do { /* If current boundvert has a seam length > 0 then it has a seam running along its edges. */ if (bcur->seam_len) { if (!bv->vmesh->boundstart->seam_len && start == bv->vmesh->boundstart) { start = bcur; /* Set start to first boundvert with seam_len > 0. */ } /* Now for all the mesh_verts starting at current index and ending at idxlen * we go through outermost ring and through all its segments and add seams * for those edges. */ int idxlen = bcur->index + bcur->seam_len; for (int i = bcur->index; i < idxlen; i++) { BMVert *v1 = mesh_vert(vm, i % vm->count, 0, 0)->v, *v2; BMEdge *e; for (int k = 1; k < vm->seg; k++) { v2 = mesh_vert(vm, i % vm->count, 0, k)->v; /* Here v1 & v2 are current and next BMverts, * we find common edge and set its edge data. */ e = v1->e; while (e->v1 != v2 && e->v2 != v2) { if (e->v1 == v1) { e = e->v1_disk_link.next; } else { e = e->v2_disk_link.next; } } BM_elem_flag_set(e, BM_ELEM_SEAM, true); v1 = v2; } BMVert *v3 = mesh_vert(vm, (i + 1) % vm->count, 0, 0)->v; e = v1->e; /* Do same as above for first and last vert. */ while (e->v1 != v3 && e->v2 != v3) { if (e->v1 == v1) { e = e->v1_disk_link.next; } else { e = e->v2_disk_link.next; } } BM_elem_flag_set(e, BM_ELEM_SEAM, true); bcur = bcur->next; } } else { bcur = bcur->next; } } while (bcur != start); bcur = bv->vmesh->boundstart; start = bcur; do { if (bcur->sharp_len) { if (!bv->vmesh->boundstart->sharp_len && start == bv->vmesh->boundstart) { start = bcur; } int idxlen = bcur->index + bcur->sharp_len; for (int i = bcur->index; i < idxlen; i++) { BMVert *v1 = mesh_vert(vm, i % vm->count, 0, 0)->v, *v2; BMEdge *e; for (int k = 1; k < vm->seg; k++) { v2 = mesh_vert(vm, i % vm->count, 0, k)->v; e = v1->e; while (e->v1 != v2 && e->v2 != v2) { if (e->v1 == v1) { e = e->v1_disk_link.next; } else { e = e->v2_disk_link.next; } } BM_elem_flag_set(e, BM_ELEM_SMOOTH, false); v1 = v2; } BMVert *v3 = mesh_vert(vm, (i + 1) % vm->count, 0, 0)->v; e = v1->e; while (e->v1 != v3 && e->v2 != v3) { if (e->v1 == v1) { e = e->v1_disk_link.next; } else { e = e->v2_disk_link.next; } } BM_elem_flag_set(e, BM_ELEM_SMOOTH, false); bcur = bcur->next; } } else { bcur = bcur->next; } } while (bcur != start); } /* Mark edges as sharp if they are between a smooth reconstructed face and a new face. */ static void bevel_edges_sharp_boundary(BMesh *bm, BevelParams *bp) { BMIter fiter, liter; BMFace *f, *fother; BMLoop *l, *lother; FKind fkind; BM_ITER_MESH (f, &fiter, bm, BM_FACES_OF_MESH) { if (!BM_elem_flag_test(f, BM_ELEM_SMOOTH)) { continue; } if (get_face_kind(bp, f) != F_RECON) { continue; } BM_ITER_ELEM (l, &liter, f, BM_LOOPS_OF_FACE) { /* Cases we care about will have exactly one adjacent face. */ lother = l->radial_next; fother = lother->f; if (lother != l && fother) { fkind = get_face_kind(bp, lother->f); if (ELEM(fkind, F_EDGE, F_VERT)) { BM_elem_flag_disable(l->e, BM_ELEM_SMOOTH); } } } } } /** * \brief Harden normals for bevel. * * The desired effect is that the newly created #F_EDGE and #F_VERT faces appear smoothly shaded * with the normals at the boundaries with #F_RECON faces matching those recon faces. * And at boundaries between #F_EDGE and #F_VERT faces, the normals should match the #F_EDGE ones. * Assumes custom loop normals are in use. */ static void bevel_harden_normals(BevelParams *bp, BMesh *bm) { BMIter liter, fiter; BMFace *f; BMLoop *l, *lnext, *lprev, *lprevprev, *lnextnext; BMEdge *estep; FKind fkind, fprevkind, fnextkind, fprevprevkind, fnextnextkind; int cd_clnors_offset, l_index; short *clnors; float *pnorm, norm[3]; if (bp->offset == 0.0 || !bp->harden_normals) { return; } /* Recalculate all face and vertex normals. Side effect: ensures vertex, edge, face indices. */ /* I suspect this is not necessary. TODO: test that guess. */ BM_mesh_normals_update(bm); cd_clnors_offset = CustomData_get_offset(&bm->ldata, CD_CUSTOMLOOPNORMAL); /* If there is not already a custom split normal layer then making one (with BM_lnorspace_update) * will not respect the autosmooth angle between smooth faces. To get that to happen, we have * to mark the sharpen the edges that are only sharp because of the angle test -- otherwise would * be smooth. */ if (cd_clnors_offset == -1) { BM_edges_sharp_from_angle_set(bm, bp->smoothresh); bevel_edges_sharp_boundary(bm, bp); } /* Ensure that bm->lnor_spacearr has properly stored loop normals. * Side effect: ensures loop indices. */ BM_lnorspace_update(bm); if (cd_clnors_offset == -1) { cd_clnors_offset = CustomData_get_offset(&bm->ldata, CD_CUSTOMLOOPNORMAL); } BM_ITER_MESH (f, &fiter, bm, BM_FACES_OF_MESH) { fkind = get_face_kind(bp, f); if (fkind == F_ORIG || fkind == F_RECON) { continue; } BM_ITER_ELEM (l, &liter, f, BM_LOOPS_OF_FACE) { estep = l->prev->e; /* Causes CW walk around l->v fan. */ lprev = BM_vert_step_fan_loop(l, &estep); estep = l->e; /* Causes CCW walk around l->v fan. */ lnext = BM_vert_step_fan_loop(l, &estep); fprevkind = lprev ? get_face_kind(bp, lprev->f) : F_NONE; fnextkind = lnext ? get_face_kind(bp, lnext->f) : F_NONE; pnorm = NULL; if (fkind == F_EDGE) { if (fprevkind == F_EDGE && BM_elem_flag_test(l, BM_ELEM_LONG_TAG)) { add_v3_v3v3(norm, f->no, lprev->f->no); pnorm = norm; } else if (fnextkind == F_EDGE && BM_elem_flag_test(lnext, BM_ELEM_LONG_TAG)) { add_v3_v3v3(norm, f->no, lnext->f->no); pnorm = norm; } else if (fprevkind == F_RECON && BM_elem_flag_test(l, BM_ELEM_LONG_TAG)) { pnorm = lprev->f->no; } else if (fnextkind == F_RECON && BM_elem_flag_test(l->prev, BM_ELEM_LONG_TAG)) { pnorm = lnext->f->no; } else { /* printf("unexpected harden case (edge)\n"); */ } } else if (fkind == F_VERT) { if (fprevkind == F_VERT && fnextkind == F_VERT) { pnorm = l->v->no; } else if (fprevkind == F_RECON) { pnorm = lprev->f->no; } else if (fnextkind == F_RECON) { pnorm = lnext->f->no; } else { if (lprev) { estep = lprev->prev->e; lprevprev = BM_vert_step_fan_loop(lprev, &estep); } else { lprevprev = NULL; } if (lnext) { estep = lnext->e; lnextnext = BM_vert_step_fan_loop(lnext, &estep); } else { lnextnext = NULL; } fprevprevkind = lprevprev ? get_face_kind(bp, lprevprev->f) : F_NONE; fnextnextkind = lnextnext ? get_face_kind(bp, lnextnext->f) : F_NONE; if (fprevkind == F_EDGE && fprevprevkind == F_RECON) { pnorm = lprevprev->f->no; } else if (fprevkind == F_EDGE && fnextkind == F_VERT && fprevprevkind == F_EDGE) { add_v3_v3v3(norm, lprev->f->no, lprevprev->f->no); pnorm = norm; } else if (fnextkind == F_EDGE && fprevkind == F_VERT && fnextnextkind == F_EDGE) { add_v3_v3v3(norm, lnext->f->no, lnextnext->f->no); pnorm = norm; } else { /* printf("unexpected harden case (vert)\n"); */ } } } if (pnorm) { if (pnorm == norm) { normalize_v3(norm); } l_index = BM_elem_index_get(l); clnors = BM_ELEM_CD_GET_VOID_P(l, cd_clnors_offset); BKE_lnor_space_custom_normal_to_data(bm->lnor_spacearr->lspacearr[l_index], pnorm, clnors); } } } } static void bevel_set_weighted_normal_face_strength(BMesh *bm, BevelParams *bp) { BMFace *f; BMIter fiter; FKind fkind; int strength; int mode = bp->face_strength_mode; bool do_set_strength; const char *wn_layer_id = MOD_WEIGHTEDNORMALS_FACEWEIGHT_CDLAYER_ID; int cd_prop_int_idx = CustomData_get_named_layer_index(&bm->pdata, CD_PROP_INT32, wn_layer_id); if (cd_prop_int_idx == -1) { BM_data_layer_add_named(bm, &bm->pdata, CD_PROP_INT32, wn_layer_id); cd_prop_int_idx = CustomData_get_named_layer_index(&bm->pdata, CD_PROP_INT32, wn_layer_id); } cd_prop_int_idx -= CustomData_get_layer_index(&bm->pdata, CD_PROP_INT32); const int cd_prop_int_offset = CustomData_get_n_offset( &bm->pdata, CD_PROP_INT32, cd_prop_int_idx); BM_ITER_MESH (f, &fiter, bm, BM_FACES_OF_MESH) { fkind = get_face_kind(bp, f); do_set_strength = true; switch (fkind) { case F_VERT: strength = FACE_STRENGTH_WEAK; do_set_strength = (mode >= BEVEL_FACE_STRENGTH_NEW); break; case F_EDGE: strength = FACE_STRENGTH_MEDIUM; do_set_strength = (mode >= BEVEL_FACE_STRENGTH_NEW); break; case F_RECON: strength = FACE_STRENGTH_STRONG; do_set_strength = (mode >= BEVEL_FACE_STRENGTH_AFFECTED); break; case F_ORIG: strength = FACE_STRENGTH_STRONG; do_set_strength = (mode == BEVEL_FACE_STRENGTH_ALL); break; default: do_set_strength = false; } if (do_set_strength) { int *strength_ptr = BM_ELEM_CD_GET_VOID_P(f, cd_prop_int_offset); *strength_ptr = strength; } } } /* Set the any_seam property for a BevVert and all its BoundVerts. */ static void set_bound_vert_seams(BevVert *bv, bool mark_seam, bool mark_sharp) { BoundVert *v; EdgeHalf *e; bv->any_seam = false; v = bv->vmesh->boundstart; do { v->any_seam = false; for (e = v->efirst; e; e = e->next) { v->any_seam |= e->is_seam; if (e == v->elast) { break; } } bv->any_seam |= v->any_seam; } while ((v = v->next) != bv->vmesh->boundstart); if (mark_seam) { check_edge_data_seam_sharp_edges(bv, BM_ELEM_SEAM, false); } if (mark_sharp) { check_edge_data_seam_sharp_edges(bv, BM_ELEM_SMOOTH, true); } } static int count_bound_vert_seams(BevVert *bv) { int ans, i; if (!bv->any_seam) { return 0; } ans = 0; for (i = 0; i < bv->edgecount; i++) { if (bv->edges[i].is_seam) { ans++; } } return ans; } /* Is e between two faces with a 180 degree angle between their normals? */ static bool eh_on_plane(EdgeHalf *e) { float dot; if (e->fprev && e->fnext) { dot = dot_v3v3(e->fprev->no, e->fnext->no); if (fabsf(dot + 1.0f) <= BEVEL_EPSILON_BIG || fabsf(dot - 1.0f) <= BEVEL_EPSILON_BIG) { return true; } } return false; } /** * Calculate the profiles for all the BoundVerts of VMesh vm. * * \note This should only be called once for each BevVert, after all changes have been made to the * profile's parameters. */ static void calculate_vm_profiles(BevelParams *bp, BevVert *bv, VMesh *vm) { BoundVert *bndv = vm->boundstart; do { /* In special cases the params will have already been set. */ if (!bndv->profile.special_params) { set_profile_params(bp, bv, bndv); } bool miter_profile = false; bool reverse_profile = false; if (bp->profile_type == BEVEL_PROFILE_CUSTOM) { /* Use the miter profile spacing struct if the default is filled with the custom profile. */ miter_profile = (bndv->is_arc_start || bndv->is_patch_start); /* Don't bother reversing the profile if it's a miter profile */ reverse_profile = !bndv->is_profile_start && !miter_profile; } calculate_profile(bp, bndv, reverse_profile, miter_profile); } while ((bndv = bndv->next) != vm->boundstart); } /* Implements build_boundary for the vertex-only case. */ static void build_boundary_vertex_only(BevelParams *bp, BevVert *bv, bool construct) { VMesh *vm = bv->vmesh; EdgeHalf *efirst, *e; BoundVert *v; float co[3]; BLI_assert(bp->affect_type == BEVEL_AFFECT_VERTICES); e = efirst = &bv->edges[0]; do { slide_dist(e, bv->v, e->offset_l, co); if (construct) { v = add_new_bound_vert(bp->mem_arena, vm, co); v->efirst = v->elast = e; e->leftv = e->rightv = v; } else { adjust_bound_vert(e->leftv, co); } } while ((e = e->next) != efirst); if (construct) { set_bound_vert_seams(bv, bp->mark_seam, bp->mark_sharp); if (vm->count == 2) { vm->mesh_kind = M_NONE; } else if (bp->seg == 1) { vm->mesh_kind = M_POLY; } else { vm->mesh_kind = M_ADJ; } } } /** * Special case of build_boundary when a single edge is beveled. * The 'width adjust' part of build_boundary has been done already, * and \a efirst is the first beveled edge at vertex \a bv. */ static void build_boundary_terminal_edge(BevelParams *bp, BevVert *bv, EdgeHalf *efirst, const bool construct) { MemArena *mem_arena = bp->mem_arena; VMesh *vm = bv->vmesh; BoundVert *bndv; EdgeHalf *e; const float *no; float co[3], d; bool use_tri_fan; e = efirst; if (bv->edgecount == 2) { /* Only 2 edges in, so terminate the edge with an artificial vertex on the unbeveled edge. */ no = e->fprev ? e->fprev->no : (e->fnext ? e->fnext->no : NULL); offset_in_plane(e, no, true, co); if (construct) { bndv = add_new_bound_vert(mem_arena, vm, co); bndv->efirst = bndv->elast = bndv->ebev = e; e->leftv = bndv; } else { adjust_bound_vert(e->leftv, co); } no = e->fnext ? e->fnext->no : (e->fprev ? e->fprev->no : NULL); offset_in_plane(e, no, false, co); if (construct) { bndv = add_new_bound_vert(mem_arena, vm, co); bndv->efirst = bndv->elast = e; e->rightv = bndv; } else { adjust_bound_vert(e->rightv, co); } /* Make artificial extra point along unbeveled edge, and form triangle. */ slide_dist(e->next, bv->v, e->offset_l, co); if (construct) { bndv = add_new_bound_vert(mem_arena, vm, co); bndv->efirst = bndv->elast = e->next; e->next->leftv = e->next->rightv = bndv; set_bound_vert_seams(bv, bp->mark_seam, bp->mark_sharp); } else { adjust_bound_vert(e->next->leftv, co); } } else { /* More than 2 edges in. Put on-edge verts on all the other edges and join with the beveled * edge to make a poly or adj mesh, because e->prev has offset 0, offset_meet will put co on * that edge. */ /* TODO: should do something else if angle between e and e->prev > 180 */ offset_meet(e->prev, e, bv->v, e->fprev, false, co, NULL); if (construct) { bndv = add_new_bound_vert(mem_arena, vm, co); bndv->efirst = e->prev; bndv->elast = bndv->ebev = e; e->leftv = bndv; e->prev->leftv = e->prev->rightv = bndv; } else { adjust_bound_vert(e->leftv, co); } e = e->next; offset_meet(e->prev, e, bv->v, e->fprev, false, co, NULL); if (construct) { bndv = add_new_bound_vert(mem_arena, vm, co); bndv->efirst = e->prev; bndv->elast = e; e->leftv = e->rightv = bndv; e->prev->rightv = bndv; } else { adjust_bound_vert(e->leftv, co); } /* For the edges not adjacent to the beveled edge, slide the bevel amount along. */ d = efirst->offset_l_spec; if (bp->profile_type == BEVEL_PROFILE_CUSTOM || bp->profile < 0.25f) { d *= sqrtf(2.0f); /* Need to go further along the edge to make room for full profile area. */ } for (e = e->next; e->next != efirst; e = e->next) { slide_dist(e, bv->v, d, co); if (construct) { bndv = add_new_bound_vert(mem_arena, vm, co); bndv->efirst = bndv->elast = e; e->leftv = e->rightv = bndv; } else { adjust_bound_vert(e->leftv, co); } } } if (bv->edgecount >= 3) { /* Special case: snap profile to plane of adjacent two edges. */ bndv = vm->boundstart; BLI_assert(bndv->ebev != NULL); set_profile_params(bp, bv, bndv); move_profile_plane(bndv, bv->v); } if (construct) { set_bound_vert_seams(bv, bp->mark_seam, bp->mark_sharp); if (vm->count == 2 && bv->edgecount == 3) { vm->mesh_kind = M_NONE; } else if (vm->count == 3) { use_tri_fan = true; if (bp->profile_type == BEVEL_PROFILE_CUSTOM) { /* Prevent overhanging edges: use M_POLY if the extra point is planar with the profile. */ bndv = efirst->leftv; float profile_plane[4]; plane_from_point_normal_v3(profile_plane, bndv->profile.plane_co, bndv->profile.plane_no); bndv = efirst->rightv->next; /* The added boundvert placed along the non-adjacent edge. */ if (dist_squared_to_plane_v3(bndv->nv.co, profile_plane) < BEVEL_EPSILON_BIG) { use_tri_fan = false; } } vm->mesh_kind = (use_tri_fan) ? M_TRI_FAN : M_POLY; } else { vm->mesh_kind = M_POLY; } } } /* Helper for build_boundary to handle special miters. */ static void adjust_miter_coords(BevelParams *bp, BevVert *bv, EdgeHalf *emiter) { float co1[3], co2[3], co3[3], edge_dir[3], line_p[3]; BoundVert *v1, *v2, *v3, *v1prev, *v3next; BMVert *vother; EdgeHalf *emiter_other; int miter_outer = bp->miter_outer; v1 = emiter->rightv; if (miter_outer == BEVEL_MITER_PATCH) { v2 = v1->next; v3 = v2->next; } else { BLI_assert(miter_outer == BEVEL_MITER_ARC); v2 = NULL; v3 = v1->next; } v1prev = v1->prev; v3next = v3->next; copy_v3_v3(co2, v1->nv.co); if (v1->is_arc_start) { copy_v3_v3(v1->profile.middle, co2); } /* co1 is intersection of line through co2 in dir of emiter->e * and plane with normal the dir of emiter->e and through v1prev. */ vother = BM_edge_other_vert(emiter->e, bv->v); sub_v3_v3v3(edge_dir, bv->v->co, vother->co); normalize_v3(edge_dir); float d = bp->offset / (bp->seg / 2.0f); /* A fallback amount to move. */ madd_v3_v3v3fl(line_p, co2, edge_dir, d); if (!isect_line_plane_v3(co1, co2, line_p, v1prev->nv.co, edge_dir)) { copy_v3_v3(co1, line_p); } adjust_bound_vert(v1, co1); /* co3 is similar, but plane is through v3next and line is other side of miter edge. */ emiter_other = v3->elast; vother = BM_edge_other_vert(emiter_other->e, bv->v); sub_v3_v3v3(edge_dir, bv->v->co, vother->co); normalize_v3(edge_dir); madd_v3_v3v3fl(line_p, co2, edge_dir, d); if (!isect_line_plane_v3(co3, co2, line_p, v3next->nv.co, edge_dir)) { copy_v3_v3(co1, line_p); } adjust_bound_vert(v3, co3); } static void adjust_miter_inner_coords(BevelParams *bp, BevVert *bv, EdgeHalf *emiter) { BoundVert *v, *vstart, *v3; EdgeHalf *e; BMVert *vother; float edge_dir[3], co[3]; v = vstart = bv->vmesh->boundstart; do { if (v->is_arc_start) { v3 = v->next; e = v->efirst; if (e != emiter) { copy_v3_v3(co, v->nv.co); vother = BM_edge_other_vert(e->e, bv->v); sub_v3_v3v3(edge_dir, vother->co, bv->v->co); normalize_v3(edge_dir); madd_v3_v3v3fl(v->nv.co, co, edge_dir, bp->spread); e = v3->elast; vother = BM_edge_other_vert(e->e, bv->v); sub_v3_v3v3(edge_dir, vother->co, bv->v->co); normalize_v3(edge_dir); madd_v3_v3v3fl(v3->nv.co, co, edge_dir, bp->spread); } v = v3->next; } else { v = v->next; } } while (v != vstart); } /** * Make a circular list of BoundVerts for bv, each of which has the coordinates of a vertex on the * boundary of the beveled vertex bv->v. This may adjust some EdgeHalf widths, and there might have * to be a subsequent pass to make the widths as consistent as possible. * Doesn't make the actual BMVerts. * * For a width consistency pass, we just recalculate the coordinates of the #BoundVerts. If the * other ends have been (re)built already, then we copy the offsets from there to match, else we * use the ideal (user-specified) widths. * * \param construct: The first time through, construct will be true and we are making the * #BoundVerts and setting up the #BoundVert and #EdgeHalf pointers appropriately. * Also, if construct, decide on the mesh pattern that will be used inside the boundary. */ static void build_boundary(BevelParams *bp, BevVert *bv, bool construct) { MemArena *mem_arena = bp->mem_arena; EdgeHalf *efirst, *e, *e2, *e3, *enip, *eip, *eon, *emiter; BoundVert *v, *v1, *v2, *v3; VMesh *vm; float co[3], r; int in_plane, not_in_plane, miter_outer, miter_inner; int ang_kind; /* Current bevel does nothing if only one edge into a vertex. */ if (bv->edgecount <= 1) { return; } if (bp->affect_type == BEVEL_AFFECT_VERTICES) { build_boundary_vertex_only(bp, bv, construct); return; } vm = bv->vmesh; /* Find a beveled edge to be efirst. */ e = efirst = next_bev(bv, NULL); BLI_assert(e->is_bev); if (bv->selcount == 1) { /* Special case: only one beveled edge in. */ build_boundary_terminal_edge(bp, bv, efirst, construct); return; } /* Special miters outside only for 3 or more beveled edges. */ miter_outer = (bv->selcount >= 3) ? bp->miter_outer : BEVEL_MITER_SHARP; miter_inner = bp->miter_inner; /* Keep track of the first beveled edge of an outside miter (there can be at most 1 per bv). */ emiter = NULL; /* There is more than one beveled edge. * We make BoundVerts to connect the sides of the beveled edges. * Non-beveled edges in between will just join to the appropriate juncture point. */ e = efirst; do { BLI_assert(e->is_bev); eon = NULL; /* Make the BoundVert for the right side of e; the other side will be made when the beveled * edge to the left of e is handled. * Analyze edges until next beveled edge: They are either "in plane" (preceding and subsequent * faces are coplanar) or not. The "non-in-plane" edges affect the silhouette and we prefer to * slide along one of those if possible. */ in_plane = not_in_plane = 0; /* Counts of in-plane / not-in-plane. */ enip = eip = NULL; /* Representatives of each type. */ for (e2 = e->next; !e2->is_bev; e2 = e2->next) { if (eh_on_plane(e2)) { in_plane++; eip = e2; } else { not_in_plane++; enip = e2; } } if (in_plane == 0 && not_in_plane == 0) { offset_meet(e, e2, bv->v, e->fnext, false, co, NULL); } else if (not_in_plane > 0) { if (bp->loop_slide && not_in_plane == 1 && good_offset_on_edge_between(e, e2, enip, bv->v)) { if (offset_on_edge_between(e, e2, enip, bv->v, co, &r)) { eon = enip; } } else { offset_meet(e, e2, bv->v, NULL, true, co, eip); } } else { /* n_in_plane > 0 and n_not_in_plane == 0. */ if (bp->loop_slide && in_plane == 1 && good_offset_on_edge_between(e, e2, eip, bv->v)) { if (offset_on_edge_between(e, e2, eip, bv->v, co, &r)) { eon = eip; } } else { offset_meet(e, e2, bv->v, e->fnext, true, co, eip); } } if (construct) { v = add_new_bound_vert(mem_arena, vm, co); v->efirst = e; v->elast = e2; v->ebev = e2; v->eon = eon; if (eon) { v->sinratio = r; } e->rightv = v; e2->leftv = v; for (e3 = e->next; e3 != e2; e3 = e3->next) { e3->leftv = e3->rightv = v; } ang_kind = edges_angle_kind(e, e2, bv->v); /* Are we doing special mitering? * There can only be one outer reflex angle, so only one outer miter, * and emiter will be set to the first edge of such an edge. * A miter kind of BEVEL_MITER_SHARP means no special miter */ if ((miter_outer != BEVEL_MITER_SHARP && !emiter && ang_kind == ANGLE_LARGER) || (miter_inner != BEVEL_MITER_SHARP && ang_kind == ANGLE_SMALLER)) { if (ang_kind == ANGLE_LARGER) { emiter = e; } /* Make one or two more boundverts; for now all will have same co. */ v1 = v; v1->ebev = NULL; if (ang_kind == ANGLE_LARGER && miter_outer == BEVEL_MITER_PATCH) { v2 = add_new_bound_vert(mem_arena, vm, co); } else { v2 = NULL; } v3 = add_new_bound_vert(mem_arena, vm, co); v3->ebev = e2; v3->efirst = e2; v3->elast = e2; v3->eon = NULL; e2->leftv = v3; if (ang_kind == ANGLE_LARGER && miter_outer == BEVEL_MITER_PATCH) { v1->is_patch_start = true; v2->eon = v1->eon; v2->sinratio = v1->sinratio; v2->ebev = NULL; v1->eon = NULL; v1->sinratio = 1.0f; v1->elast = e; if (e->next == e2) { v2->efirst = NULL; v2->elast = NULL; } else { v2->efirst = e->next; for (e3 = e->next; e3 != e2; e3 = e3->next) { e3->leftv = e3->rightv = v2; v2->elast = e3; } } } else { v1->is_arc_start = true; copy_v3_v3(v1->profile.middle, co); if (e->next == e2) { v1->elast = v1->efirst; } else { int between = in_plane + not_in_plane; int bet2 = between / 2; bool betodd = (between % 2) == 1; int i = 0; /* Put first half of in-between edges at index 0, second half at index bp->seg. * If between is odd, put middle one at mid-index. */ for (e3 = e->next; e3 != e2; e3 = e3->next) { v1->elast = e3; if (i < bet2) { e3->profile_index = 0; } else if (betodd && i == bet2) { e3->profile_index = bp->seg / 2; } else { e3->profile_index = bp->seg; } i++; } } } } } else { /* construct == false. */ ang_kind = edges_angle_kind(e, e2, bv->v); if ((miter_outer != BEVEL_MITER_SHARP && !emiter && ang_kind == ANGLE_LARGER) || (miter_inner != BEVEL_MITER_SHARP && ang_kind == ANGLE_SMALLER)) { if (ang_kind == ANGLE_LARGER) { emiter = e; } v1 = e->rightv; if (ang_kind == ANGLE_LARGER && miter_outer == BEVEL_MITER_PATCH) { v2 = v1->next; v3 = v2->next; } else { v2 = NULL; v3 = v1->next; } adjust_bound_vert(v1, co); if (v2) { adjust_bound_vert(v2, co); } adjust_bound_vert(v3, co); } else { adjust_bound_vert(e->rightv, co); } } e = e2; } while (e != efirst); if (miter_inner != BEVEL_MITER_SHARP) { adjust_miter_inner_coords(bp, bv, emiter); } if (emiter) { adjust_miter_coords(bp, bv, emiter); } if (construct) { set_bound_vert_seams(bv, bp->mark_seam, bp->mark_sharp); if (vm->count == 2) { vm->mesh_kind = M_NONE; } else if (efirst->seg == 1) { vm->mesh_kind = M_POLY; } else { switch (bp->vmesh_method) { case BEVEL_VMESH_ADJ: vm->mesh_kind = M_ADJ; break; case BEVEL_VMESH_CUTOFF: vm->mesh_kind = M_CUTOFF; break; } } } } #ifdef DEBUG_ADJUST static void print_adjust_stats(BoundVert *vstart) { BoundVert *v; EdgeHalf *eleft, *eright; double even_residual2, spec_residual2; double max_even_r, max_even_r_pct; double max_spec_r, max_spec_r_pct; double delta, delta_pct; printf("\nSolution analysis\n"); even_residual2 = 0.0; spec_residual2 = 0.0; max_even_r = 0.0; max_even_r_pct = 0.0; max_spec_r = 0.0; max_spec_r_pct = 0.0; printf("width matching\n"); v = vstart; do { if (v->adjchain != NULL) { eright = v->efirst; eleft = v->adjchain->elast; delta = fabs(eright->offset_r - eleft->offset_l); delta_pct = 100.0 * delta / eright->offset_r_spec; printf("e%d r(%f) vs l(%f): abs(delta)=%f, delta_pct=%f\n", BM_elem_index_get(eright->e), eright->offset_r, eleft->offset_l, delta, delta_pct); even_residual2 += delta * delta; if (delta > max_even_r) { max_even_r = delta; } if (delta_pct > max_even_r_pct) { max_even_r_pct = delta_pct; } } v = v->adjchain; } while (v && v != vstart); printf("spec matching\n"); v = vstart; do { if (v->adjchain != NULL) { eright = v->efirst; eleft = v->adjchain->elast; delta = eright->offset_r - eright->offset_r_spec; delta_pct = 100.0 * delta / eright->offset_r_spec; printf("e%d r(%f) vs r spec(%f): delta=%f, delta_pct=%f\n", BM_elem_index_get(eright->e), eright->offset_r, eright->offset_r_spec, delta, delta_pct); spec_residual2 += delta * delta; delta = fabs(delta); delta_pct = fabs(delta_pct); if (delta > max_spec_r) { max_spec_r = delta; } if (delta_pct > max_spec_r_pct) { max_spec_r_pct = delta_pct; } delta = eleft->offset_l - eleft->offset_l_spec; delta_pct = 100.0 * delta / eright->offset_l_spec; printf("e%d l(%f) vs l spec(%f): delta=%f, delta_pct=%f\n", BM_elem_index_get(eright->e), eleft->offset_l, eleft->offset_l_spec, delta, delta_pct); spec_residual2 += delta * delta; delta = fabs(delta); delta_pct = fabs(delta_pct); if (delta > max_spec_r) { max_spec_r = delta; } if (delta_pct > max_spec_r_pct) { max_spec_r_pct = delta_pct; } } v = v->adjchain; } while (v && v != vstart); printf("Analysis Result:\n"); printf("even residual2 = %f, spec residual2 = %f\n", even_residual2, spec_residual2); printf("max even delta = %f, max as percent of spec = %f\n", max_even_r, max_even_r_pct); printf("max spec delta = %f, max as percent of spec = %f\n", max_spec_r, max_spec_r_pct); } #endif #ifdef FAST_ADJUST_CODE /* This code uses a direct solution to the adjustment problem for chains and certain cycles. * It is a two-step approach: first solve for the exact solution of the 'match widths' constraints * using the one degree of freedom that allows for expressing all other widths in terms of that. * And then minimize the spec-matching constraints using the derivative of the least squares * residual in terms of that one degree of freedom. * Unfortunately, the results are in some cases worse than the general least squares solution * for the combined (with weights) problem, so this code is not used. * But keep it here for a while in case performance issues demand that it be used sometimes. */ static bool adjust_the_cycle_or_chain_fast(BoundVert *vstart, int np, bool iscycle) { BoundVert *v; EdgeHalf *eleft, *eright; float *g; float *g_prod; float gprod, gprod_sum, spec_sum, p; int i; g = MEM_mallocN(np * sizeof(float), "beveladjust"); g_prod = MEM_mallocN(np * sizeof(float), "beveladjust"); v = vstart; spec_sum = 0.0f; i = 0; do { g[i] = v->sinratio; if (iscycle || v->adjchain != NULL) { spec_sum += v->efirst->offset_r; } else { spec_sum += v->elast->offset_l; } i++; v = v->adjchain; } while (v && v != vstart); gprod = 1.00f; gprod_sum = 1.0f; for (i = np - 1; i > 0; i--) { gprod *= g[i]; g_prod[i] = gprod; gprod_sum += gprod; } g_prod[0] = 1.0f; if (iscycle) { gprod *= g[0]; if (fabs(gprod - 1.0f) > BEVEL_EPSILON) { /* Fast cycle calc only works if total product is 1. */ MEM_freeN(g); MEM_freeN(g_prod); return false; } } if (gprod_sum == 0.0f) { MEM_freeN(g); MEM_freeN(g_prod); return false; } p = spec_sum / gprod_sum; /* Apply the new offsets. */ v = vstart; i = 0; do { if (iscycle || v->adjchain != NULL) { eright = v->efirst; eleft = v->elast; eright->offset_r = g_prod[(i + 1) % np] * p; if (iscycle || v != vstart) { eleft->offset_l = v->sinratio * eright->offset_r; } } else { /* Not a cycle, and last of chain. */ eleft = v->elast; eleft->offset_l = p; } i++; v = v->adjchain; } while (v && v != vstart); MEM_freeN(g); MEM_freeN(g_prod); return true; } #endif /** * Helper function to return the next Beveled EdgeHalf along a path. * * \param toward_bv: Whether the direction to travel points toward or away from the BevVert * connected to the current EdgeHalf. * \param r_bv: The BevVert connected to the EdgeHalf -- updated if we're traveling to the other * EdgeHalf of an original edge. * * \note This only returns the most parallel edge if it's the most parallel by * at least 10 degrees. This is a somewhat arbitrary choice, but it makes sure that consistent * orientation paths only continue in obvious ways. */ static EdgeHalf *next_edgehalf_bev(BevelParams *bp, EdgeHalf *start_edge, bool toward_bv, BevVert **r_bv) { EdgeHalf *new_edge; EdgeHalf *next_edge = NULL; float dir_start_edge[3], dir_new_edge[3]; float second_best_dot = 0.0f, best_dot = 0.0f; float new_dot; /* Case 1: The next EdgeHalf is across a BevVert from the current EdgeHalf. */ if (toward_bv) { /* Skip all the logic if there's only one beveled edge at the vertex, we're at an end. */ if ((*r_bv)->selcount == 1) { return NULL; /* No other edges to go to. */ } /* The case with only one other edge connected to the vertex is special too. */ if ((*r_bv)->selcount == 2) { /* Just find the next beveled edge, that's the only other option. */ new_edge = start_edge; do { new_edge = new_edge->next; } while (!new_edge->is_bev); return new_edge; } /* Find the direction vector of the current edge (pointing INTO the BevVert). * v1 and v2 don't necessarily have an order, so we need to check which is closer to bv. */ if (start_edge->e->v1 == (*r_bv)->v) { sub_v3_v3v3(dir_start_edge, start_edge->e->v1->co, start_edge->e->v2->co); } else { sub_v3_v3v3(dir_start_edge, start_edge->e->v2->co, start_edge->e->v1->co); } normalize_v3(dir_start_edge); /* Find the beveled edge coming out of the BevVert that's most parallel to the current edge. */ new_edge = start_edge->next; while (new_edge != start_edge) { if (!new_edge->is_bev) { new_edge = new_edge->next; continue; } /* Find direction vector of the possible next edge (pointing OUT of the BevVert). */ if (new_edge->e->v2 == (*r_bv)->v) { sub_v3_v3v3(dir_new_edge, new_edge->e->v1->co, new_edge->e->v2->co); } else { sub_v3_v3v3(dir_new_edge, new_edge->e->v2->co, new_edge->e->v1->co); } normalize_v3(dir_new_edge); /* Use this edge if it is the most parallel to the orignial so far. */ new_dot = dot_v3v3(dir_new_edge, dir_start_edge); if (new_dot > best_dot) { second_best_dot = best_dot; /* For remembering if the choice was too close. */ best_dot = new_dot; next_edge = new_edge; } else if (new_dot > second_best_dot) { second_best_dot = new_dot; } new_edge = new_edge->next; } /* Only return a new Edge if one was found and if the choice of next edge was not too close. */ if ((next_edge != NULL) && compare_ff(best_dot, second_best_dot, BEVEL_SMALL_ANG_DOT)) { return NULL; } return next_edge; } /* Case 2: The next EdgeHalf is the other side of the BMEdge. * It's part of the same BMEdge, so we know the other EdgeHalf is also beveled. */ next_edge = find_other_end_edge_half(bp, start_edge, r_bv); return next_edge; } /** * Starting along any beveled edge, travel along the chain / cycle of beveled edges including that * edge, marking consistent profile orientations along the way. Orientations are marked by setting * whether the BoundVert that contains each profile's information is the side of the profile's * start or not. */ static void regularize_profile_orientation(BevelParams *bp, BMEdge *bme) { BevVert *start_bv = find_bevvert(bp, bme->v1); EdgeHalf *start_edgehalf = find_edge_half(start_bv, bme); if (!start_edgehalf->is_bev || start_edgehalf->visited_rpo) { return; } /* Pick a BoundVert on one side of the profile to use for the starting side. Use the one highest * on the Z axis because even any rule is better than an arbitrary decision. */ bool right_highest = start_edgehalf->leftv->nv.co[2] < start_edgehalf->rightv->nv.co[2]; start_edgehalf->leftv->is_profile_start = right_highest; start_edgehalf->visited_rpo = true; /* First loop starts in the away from BevVert direction and the second starts toward it. */ bool toward_bv; BevVert *bv; EdgeHalf *edgehalf; for (int i = 0; i < 2; i++) { edgehalf = start_edgehalf; bv = start_bv; toward_bv = (i == 0); edgehalf = next_edgehalf_bev(bp, edgehalf, toward_bv, &bv); /* Keep traveling until there is no unvisited beveled edgehalf to visit next. */ while (edgehalf && !edgehalf->visited_rpo) { /* Mark the correct BoundVert as the start of the newly visited profile. * The direction relative to the BevVert switches every step, so also switch * the orientation every step. */ if (i == 0) { edgehalf->leftv->is_profile_start = toward_bv ^ right_highest; } else { /* The opposite side as the first direction because we're moving the other way. */ edgehalf->leftv->is_profile_start = (!toward_bv) ^ right_highest; } /* The next jump will in the opposite direction relative to the BevVert. */ toward_bv = !toward_bv; edgehalf->visited_rpo = true; edgehalf = next_edgehalf_bev(bp, edgehalf, toward_bv, &bv); } } } /** * Adjust the offsets for a single cycle or chain. * For chains and some cycles, a fast solution exists. * Otherwise, we set up and solve a linear least squares problem * that tries to minimize the squared differences of lengths * at each end of an edge, and (with smaller weight) the * squared differences of the offsets from their specs. */ static void adjust_the_cycle_or_chain(BoundVert *vstart, bool iscycle) { BoundVert *v; EdgeHalf *eleft, *eright, *enextleft; LinearSolver *solver; double weight, val; int i, np, nrows, row; np = 0; #ifdef DEBUG_ADJUST printf("\nadjust the %s (with eigen)\n", iscycle ? "cycle" : "chain"); #endif v = vstart; do { #ifdef DEBUG_ADJUST eleft = v->elast; eright = v->efirst; printf(" (left=e%d, right=e%d)", BM_elem_index_get(eleft->e), BM_elem_index_get(eright->e)); #endif np++; v = v->adjchain; } while (v && v != vstart); #ifdef DEBUG_ADJUST printf(" -> %d parms\n", np); #endif #ifdef FAST_ADJUST_CODE if (adjust_the_cycle_or_chain_fast(vstart, np, iscycle)) { return; } #endif nrows = iscycle ? 3 * np : 3 * np - 3; solver = EIG_linear_least_squares_solver_new(nrows, np, 1); v = vstart; i = 0; weight = BEVEL_MATCH_SPEC_WEIGHT; /* Sqrt of factor to weight down importance of spec match. */ do { /* Except at end of chain, v's indep variable is offset_r of v->efirst. */ if (iscycle || i < np - 1) { eright = v->efirst; eleft = v->elast; enextleft = v->adjchain->elast; #ifdef DEBUG_ADJUST printf("p%d: e%d->offset_r = %f\n", i, BM_elem_index_get(eright->e), eright->offset_r); if (iscycle || v != vstart) { printf(" dependent: e%d->offset_l = %f * p%d\n", BM_elem_index_get(eleft->e), v->sinratio, i); } #endif /* Residue i: width difference between eright and eleft of next. */ EIG_linear_solver_matrix_add(solver, i, i, 1.0); EIG_linear_solver_right_hand_side_add(solver, 0, i, 0.0); if (iscycle) { EIG_linear_solver_matrix_add(solver, i > 0 ? i - 1 : np - 1, i, -v->sinratio); } else { if (i > 0) { EIG_linear_solver_matrix_add(solver, i - 1, i, -v->sinratio); } } /* Residue np + 2*i (if cycle) else np - 1 + 2*i: * right offset for parm i matches its spec; weighted. */ row = iscycle ? np + 2 * i : np - 1 + 2 * i; EIG_linear_solver_matrix_add(solver, row, i, weight); EIG_linear_solver_right_hand_side_add(solver, 0, row, weight * eright->offset_r); #ifdef DEBUG_ADJUST printf("b[%d]=%f * %f, for e%d->offset_r\n", row, weight, eright->offset_r, BM_elem_index_get(eright->e)); #endif /* Residue np + 2*i + 1 (if cycle) else np - 1 + 2*i + 1: * left offset for parm i matches its spec; weighted. */ row = row + 1; EIG_linear_solver_matrix_add( solver, row, (i == np - 1) ? 0 : i + 1, weight * v->adjchain->sinratio); EIG_linear_solver_right_hand_side_add(solver, 0, row, weight * enextleft->offset_l); #ifdef DEBUG_ADJUST printf("b[%d]=%f * %f, for e%d->offset_l\n", row, weight, enextleft->offset_l, BM_elem_index_get(enextleft->e)); #endif } else { /* Not a cycle, and last of chain. */ eleft = v->elast; #ifdef DEBUG_ADJUST printf("p%d: e%d->offset_l = %f\n", i, BM_elem_index_get(eleft->e), eleft->offset_l); #endif /* Second part of residue i for last i. */ EIG_linear_solver_matrix_add(solver, i - 1, i, -1.0); } i++; v = v->adjchain; } while (v && v != vstart); EIG_linear_solver_solve(solver); #ifdef DEBUG_ADJUST /* Note: this print only works after solve, but by that time b has been cleared. */ EIG_linear_solver_print_matrix(solver); printf("\nSolution:\n"); for (i = 0; i < np; i++) { printf("p%d = %f\n", i, EIG_linear_solver_variable_get(solver, 0, i)); } #endif /* Use the solution to set new widths. */ v = vstart; i = 0; do { val = EIG_linear_solver_variable_get(solver, 0, i); if (iscycle || i < np - 1) { eright = v->efirst; eleft = v->elast; eright->offset_r = (float)val; #ifdef DEBUG_ADJUST printf("e%d->offset_r = %f\n", BM_elem_index_get(eright->e), eright->offset_r); #endif if (iscycle || v != vstart) { eleft->offset_l = (float)(v->sinratio * val); #ifdef DEBUG_ADJUST printf("e%d->offset_l = %f\n", BM_elem_index_get(eleft->e), eleft->offset_l); #endif } } else { /* Not a cycle, and last of chain. */ eleft = v->elast; eleft->offset_l = (float)val; #ifdef DEBUG_ADJUST printf("e%d->offset_l = %f\n", BM_elem_index_get(eleft->e), eleft->offset_l); #endif } i++; v = v->adjchain; } while (v && v != vstart); #ifdef DEBUG_ADJUST print_adjust_stats(vstart); EIG_linear_solver_print_matrix(solver); #endif EIG_linear_solver_delete(solver); } /** * Adjust the offsets to try to make them, as much as possible, * have even-width bevels with offsets that match their specs. * The problem that we can try to ameliorate is that when loop slide * is active, the meet point will probably not be the one that makes * both sides have their specified width. And because both ends may be * on loop slide edges, the widths at each end could be different. * * It turns out that the dependent offsets either form chains or * cycles, and we can process each of those separately. */ static void adjust_offsets(BevelParams *bp, BMesh *bm) { BMVert *bmv; BevVert *bv, *bvcur; BoundVert *v, *vanchor, *vchainstart, *vchainend, *vnext; EdgeHalf *enext; BMIter iter; bool iscycle; int chainlen; /* Find and process chains and cycles of unvisited BoundVerts that have eon set. */ /* Note: for repeatability, iterate over all verts of mesh rather than over ghash'ed BMVerts. */ BM_ITER_MESH (bmv, &iter, bm, BM_VERTS_OF_MESH) { if (!BM_elem_flag_test(bmv, BM_ELEM_TAG)) { continue; } bv = bvcur = find_bevvert(bp, bmv); if (!bv) { continue; } vanchor = bv->vmesh->boundstart; do { if (vanchor->visited || !vanchor->eon) { continue; } /* Find one of (1) a cycle that starts and ends at v * where each v has v->eon set and had not been visited before; * or (2) a chain of v's where the start and end of the chain do not have * v->eon set but all else do. * It is OK for the first and last elements to * have been visited before, but not any of the inner ones. * We chain the v's together through v->adjchain, and are following * them in left->right direction, meaning that the left side of one edge * pairs with the right side of the next edge in the cycle or chain. */ /* First follow paired edges in left->right direction. */ v = vchainstart = vchainend = vanchor; iscycle = false; chainlen = 1; while (v->eon && !v->visited && !iscycle) { v->visited = true; if (!v->efirst) { break; } enext = find_other_end_edge_half(bp, v->efirst, &bvcur); if (!enext) { break; } BLI_assert(enext != NULL); vnext = enext->leftv; v->adjchain = vnext; vchainend = vnext; chainlen++; if (vnext->visited) { if (vnext != vchainstart) { break; } adjust_the_cycle_or_chain(vchainstart, true); iscycle = true; } v = vnext; } if (!iscycle) { /* right->left direction, changing vchainstart at each step. */ v->adjchain = NULL; v = vchainstart; bvcur = bv; do { v->visited = true; if (!v->elast) { break; } enext = find_other_end_edge_half(bp, v->elast, &bvcur); if (!enext) { break; } vnext = enext->rightv; vnext->adjchain = v; chainlen++; vchainstart = vnext; v = vnext; } while (!v->visited && v->eon); if (chainlen >= 3 && !vchainstart->eon && !vchainend->eon) { adjust_the_cycle_or_chain(vchainstart, false); } } } while ((vanchor = vanchor->next) != bv->vmesh->boundstart); } /* Rebuild boundaries with new width specs. */ BM_ITER_MESH (bmv, &iter, bm, BM_VERTS_OF_MESH) { if (BM_elem_flag_test(bmv, BM_ELEM_TAG)) { bv = find_bevvert(bp, bmv); if (bv) { build_boundary(bp, bv, false); } } } } /** * Do the edges at bv form a "pipe"? * Current definition: 3 or 4 beveled edges, 2 in line with each other, * with other edges on opposite sides of the pipe if there are 4. * Also, the vertex boundary should have 3 or 4 vertices in it, * and all of the faces involved should be parallel to the pipe edges. * Return the boundary vert whose ebev is one of the pipe edges, and * whose next boundary vert has a beveled, non-pipe edge. */ static BoundVert *pipe_test(BevVert *bv) { EdgeHalf *e, *epipe; VMesh *vm; BoundVert *v1, *v2, *v3; float dir1[3], dir3[3]; vm = bv->vmesh; if (vm->count < 3 || vm->count > 4 || bv->selcount < 3 || bv->selcount > 4) { return NULL; } /* Find v1, v2, v3 all with beveled edges, where v1 and v3 have collinear edges. */ epipe = NULL; v1 = vm->boundstart; do { v2 = v1->next; v3 = v2->next; if (v1->ebev && v2->ebev && v3->ebev) { sub_v3_v3v3(dir1, bv->v->co, BM_edge_other_vert(v1->ebev->e, bv->v)->co); sub_v3_v3v3(dir3, BM_edge_other_vert(v3->ebev->e, bv->v)->co, bv->v->co); normalize_v3(dir1); normalize_v3(dir3); if (angle_normalized_v3v3(dir1, dir3) < BEVEL_EPSILON_ANG) { epipe = v1->ebev; break; } } } while ((v1 = v1->next) != vm->boundstart); if (!epipe) { return NULL; } /* Check face planes: all should have normals perpendicular to epipe. */ for (e = &bv->edges[0]; e != &bv->edges[bv->edgecount]; e++) { if (e->fnext) { if (fabsf(dot_v3v3(dir1, e->fnext->no)) > BEVEL_EPSILON_BIG) { return NULL; } } } return v1; } static VMesh *new_adj_vmesh(MemArena *mem_arena, int count, int seg, BoundVert *bounds) { VMesh *vm; vm = (VMesh *)BLI_memarena_alloc(mem_arena, sizeof(VMesh)); vm->count = count; vm->seg = seg; vm->boundstart = bounds; vm->mesh = (NewVert *)BLI_memarena_alloc( mem_arena, (size_t)(count * (1 + seg / 2) * (1 + seg)) * sizeof(NewVert)); vm->mesh_kind = M_ADJ; return vm; } /** * VMesh verts for vertex i have data for (i, 0 <= j <= ns2, 0 <= k <= ns), * where ns2 = floor(nseg / 2). * But these overlap data from previous and next i: there are some forced equivalences. * Let's call these indices the canonical ones: we will just calculate data for these * 0 <= j <= ns2, 0 <= k < ns2 (for odd ns2) * 0 <= j < ns2, 0 <= k <= ns2 (for even ns2) * also (j=ns2, k=ns2) at i=0 (for even ns2) * This function returns the canonical one for any i, j, k in [0,n],[0,ns],[0,ns]. */ static NewVert *mesh_vert_canon(VMesh *vm, int i, int j, int k) { int n, ns, ns2, odd; NewVert *ans; n = vm->count; ns = vm->seg; ns2 = ns / 2; odd = ns % 2; BLI_assert(0 <= i && i <= n && 0 <= j && j <= ns && 0 <= k && k <= ns); if (!odd && j == ns2 && k == ns2) { ans = mesh_vert(vm, 0, j, k); } else if (j <= ns2 - 1 + odd && k <= ns2) { ans = mesh_vert(vm, i, j, k); } else if (k <= ns2) { ans = mesh_vert(vm, (i + n - 1) % n, k, ns - j); } else { ans = mesh_vert(vm, (i + 1) % n, ns - k, j); } return ans; } static bool is_canon(VMesh *vm, int i, int j, int k) { int ns2 = vm->seg / 2; if (vm->seg % 2 == 1) { /* Odd. */ return (j <= ns2 && k <= ns2); } /* Even. */ return ((j < ns2 && k <= ns2) || (j == ns2 && k == ns2 && i == 0)); } /* Copy the vertex data to all of vm verts from canonical ones. */ static void vmesh_copy_equiv_verts(VMesh *vm) { int n, ns, ns2, i, j, k; NewVert *v0, *v1; n = vm->count; ns = vm->seg; ns2 = ns / 2; for (i = 0; i < n; i++) { for (j = 0; j <= ns2; j++) { for (k = 0; k <= ns; k++) { if (is_canon(vm, i, j, k)) { continue; } v1 = mesh_vert(vm, i, j, k); v0 = mesh_vert_canon(vm, i, j, k); copy_v3_v3(v1->co, v0->co); v1->v = v0->v; } } } } /* Calculate and return in r_cent the centroid of the center poly. */ static void vmesh_center(VMesh *vm, float r_cent[3]) { int n, ns2, i; n = vm->count; ns2 = vm->seg / 2; if (vm->seg % 2) { zero_v3(r_cent); for (i = 0; i < n; i++) { add_v3_v3(r_cent, mesh_vert(vm, i, ns2, ns2)->co); } mul_v3_fl(r_cent, 1.0f / (float)n); } else { copy_v3_v3(r_cent, mesh_vert(vm, 0, ns2, ns2)->co); } } static void avg4( float co[3], const NewVert *v0, const NewVert *v1, const NewVert *v2, const NewVert *v3) { add_v3_v3v3(co, v0->co, v1->co); add_v3_v3(co, v2->co); add_v3_v3(co, v3->co); mul_v3_fl(co, 0.25f); } /* Gamma needed for smooth Catmull-Clark, Sabin modification. */ static float sabin_gamma(int n) { double ans, k, k2, k4, k6, x, y; /* pPrecalculated for common cases of n. */ if (n < 3) { return 0.0f; } if (n == 3) { ans = 0.065247584f; } else if (n == 4) { ans = 0.25f; } else if (n == 5) { ans = 0.401983447f; } else if (n == 6) { ans = 0.523423277f; } else { k = cos(M_PI / (double)n); /* Need x, real root of x^3 + (4k^2 - 3)x - 2k = 0. * Answer calculated via Wolfram Alpha. */ k2 = k * k; k4 = k2 * k2; k6 = k4 * k2; y = pow(M_SQRT3 * sqrt(64.0 * k6 - 144.0 * k4 + 135.0 * k2 - 27.0) + 9.0 * k, 1.0 / 3.0); x = 0.480749856769136 * y - (0.231120424783545 * (12.0 * k2 - 9.0)) / y; ans = (k * x + 2.0 * k2 - 1.0) / (x * x * (k * x + 1.0)); } return (float)ans; } /* Fill frac with fractions of the way along ring 0 for vertex i, for use with interp_range * function. */ static void fill_vmesh_fracs(VMesh *vm, float *frac, int i) { int k, ns; float total = 0.0f; ns = vm->seg; frac[0] = 0.0f; for (k = 0; k < ns; k++) { total += len_v3v3(mesh_vert(vm, i, 0, k)->co, mesh_vert(vm, i, 0, k + 1)->co); frac[k + 1] = total; } if (total > 0.0f) { for (k = 1; k <= ns; k++) { frac[k] /= total; } } else { frac[ns] = 1.0f; } } /* Like fill_vmesh_fracs but want fractions for profile points of bndv, with ns segments. */ static void fill_profile_fracs(BevelParams *bp, BoundVert *bndv, float *frac, int ns) { int k; float co[3], nextco[3]; float total = 0.0f; frac[0] = 0.0f; copy_v3_v3(co, bndv->nv.co); for (k = 0; k < ns; k++) { get_profile_point(bp, &bndv->profile, k + 1, ns, nextco); total += len_v3v3(co, nextco); frac[k + 1] = total; copy_v3_v3(co, nextco); } if (total > 0.0f) { for (k = 1; k <= ns; k++) { frac[k] /= total; } } else { frac[ns] = 1.0f; } } /* Return i such that frac[i] <= f <= frac[i + 1], where frac[n] == 1.0 * and put fraction of rest of way between frac[i] and frac[i + 1] into r_rest. */ static int interp_range(const float *frac, int n, const float f, float *r_rest) { int i; float rest; /* Could binary search in frac, but expect n to be reasonably small. */ for (i = 0; i < n; i++) { if (f <= frac[i + 1]) { rest = f - frac[i]; if (rest == 0) { *r_rest = 0.0f; } else { *r_rest = rest / (frac[i + 1] - frac[i]); } if (i == n - 1 && *r_rest == 1.0f) { i = n; *r_rest = 0.0f; } return i; } } *r_rest = 0.0f; return n; } /* Interpolate given vmesh to make one with target nseg border vertices on the profiles. * TODO(Hans): This puts the center mesh vert at a slightly off location sometimes, which seems to * be associated with the rest of that ring being shifted or connected slightly incorrectly to its * neighbors. */ static VMesh *interp_vmesh(BevelParams *bp, VMesh *vm_in, int nseg) { int n_bndv, ns_in, nseg2, odd, i, j, k, j_in, k_in, k_in_prev, j0inc, k0inc; float *prev_frac, *frac, *new_frac, *prev_new_frac; float fraction, restj, restk, restkprev; float quad[4][3], co[3], center[3]; VMesh *vm_out; BoundVert *bndv; n_bndv = vm_in->count; ns_in = vm_in->seg; nseg2 = nseg / 2; odd = nseg % 2; vm_out = new_adj_vmesh(bp->mem_arena, n_bndv, nseg, vm_in->boundstart); prev_frac = BLI_array_alloca(prev_frac, (ns_in + 1)); frac = BLI_array_alloca(frac, (ns_in + 1)); new_frac = BLI_array_alloca(new_frac, (nseg + 1)); prev_new_frac = BLI_array_alloca(prev_new_frac, (nseg + 1)); fill_vmesh_fracs(vm_in, prev_frac, n_bndv - 1); bndv = vm_in->boundstart; fill_profile_fracs(bp, bndv->prev, prev_new_frac, nseg); for (i = 0; i < n_bndv; i++) { fill_vmesh_fracs(vm_in, frac, i); fill_profile_fracs(bp, bndv, new_frac, nseg); for (j = 0; j <= nseg2 - 1 + odd; j++) { for (k = 0; k <= nseg2; k++) { /* Finding the locations where "fraction" fits into previous and current "frac". */ fraction = new_frac[k]; k_in = interp_range(frac, ns_in, fraction, &restk); fraction = prev_new_frac[nseg - j]; k_in_prev = interp_range(prev_frac, ns_in, fraction, &restkprev); j_in = ns_in - k_in_prev; restj = -restkprev; if (restj > -BEVEL_EPSILON) { restj = 0.0f; } else { j_in = j_in - 1; restj = 1.0f + restj; } /* Use bilinear interpolation within the source quad; could be smarter here. */ if (restj < BEVEL_EPSILON && restk < BEVEL_EPSILON) { copy_v3_v3(co, mesh_vert_canon(vm_in, i, j_in, k_in)->co); } else { j0inc = (restj < BEVEL_EPSILON || j_in == ns_in) ? 0 : 1; k0inc = (restk < BEVEL_EPSILON || k_in == ns_in) ? 0 : 1; copy_v3_v3(quad[0], mesh_vert_canon(vm_in, i, j_in, k_in)->co); copy_v3_v3(quad[1], mesh_vert_canon(vm_in, i, j_in, k_in + k0inc)->co); copy_v3_v3(quad[2], mesh_vert_canon(vm_in, i, j_in + j0inc, k_in + k0inc)->co); copy_v3_v3(quad[3], mesh_vert_canon(vm_in, i, j_in + j0inc, k_in)->co); interp_bilinear_quad_v3(quad, restk, restj, co); } copy_v3_v3(mesh_vert(vm_out, i, j, k)->co, co); } } bndv = bndv->next; memcpy(prev_frac, frac, (size_t)(ns_in + 1) * sizeof(float)); memcpy(prev_new_frac, new_frac, (size_t)(nseg + 1) * sizeof(float)); } if (!odd) { vmesh_center(vm_in, center); copy_v3_v3(mesh_vert(vm_out, 0, nseg2, nseg2)->co, center); } vmesh_copy_equiv_verts(vm_out); return vm_out; } /* Do one step of cubic subdivision (Catmull-Clark), with special rules at boundaries. * For now, this is written assuming vm0->nseg is even and > 0. * We are allowed to modify vm_in, as it will not be used after this call. * See Levin 1999 paper: "Filling an N-sided hole using combined subdivision schemes". */ static VMesh *cubic_subdiv(BevelParams *bp, VMesh *vm_in) { int n_boundary, ns_in, ns_in2, ns_out; int i, j, k, inext; float co[3], co1[3], co2[3], acc[3]; float beta, gamma; VMesh *vm_out; BoundVert *bndv; n_boundary = vm_in->count; ns_in = vm_in->seg; ns_in2 = ns_in / 2; BLI_assert(ns_in % 2 == 0); ns_out = 2 * ns_in; vm_out = new_adj_vmesh(bp->mem_arena, n_boundary, ns_out, vm_in->boundstart); /* First we adjust the boundary vertices of the input mesh, storing in output mesh. */ for (i = 0; i < n_boundary; i++) { copy_v3_v3(mesh_vert(vm_out, i, 0, 0)->co, mesh_vert(vm_in, i, 0, 0)->co); for (k = 1; k < ns_in; k++) { copy_v3_v3(co, mesh_vert(vm_in, i, 0, k)->co); /* Smooth boundary rule. Custom profiles shouldn't be smoothed. */ if (bp->profile_type != BEVEL_PROFILE_CUSTOM) { copy_v3_v3(co1, mesh_vert(vm_in, i, 0, k - 1)->co); copy_v3_v3(co2, mesh_vert(vm_in, i, 0, k + 1)->co); add_v3_v3v3(acc, co1, co2); madd_v3_v3fl(acc, co, -2.0f); madd_v3_v3fl(co, acc, -1.0f / 6.0f); } copy_v3_v3(mesh_vert_canon(vm_out, i, 0, 2 * k)->co, co); } } /* Now adjust odd boundary vertices in output mesh, based on even ones. */ bndv = vm_out->boundstart; for (i = 0; i < n_boundary; i++) { for (k = 1; k < ns_out; k += 2) { get_profile_point(bp, &bndv->profile, k, ns_out, co); /* Smooth if using a non-custom profile. */ if (bp->profile_type != BEVEL_PROFILE_CUSTOM) { copy_v3_v3(co1, mesh_vert_canon(vm_out, i, 0, k - 1)->co); copy_v3_v3(co2, mesh_vert_canon(vm_out, i, 0, k + 1)->co); add_v3_v3v3(acc, co1, co2); madd_v3_v3fl(acc, co, -2.0f); madd_v3_v3fl(co, acc, -1.0f / 6.0f); } copy_v3_v3(mesh_vert_canon(vm_out, i, 0, k)->co, co); } bndv = bndv->next; } vmesh_copy_equiv_verts(vm_out); /* Copy adjusted verts back into vm_in. */ for (i = 0; i < n_boundary; i++) { for (k = 0; k < ns_in; k++) { copy_v3_v3(mesh_vert(vm_in, i, 0, k)->co, mesh_vert(vm_out, i, 0, 2 * k)->co); } } vmesh_copy_equiv_verts(vm_in); /* Now we do the internal vertices, using standard Catmull-Clark * and assuming all boundary vertices have valence 4. */ /* The new face vertices. */ for (i = 0; i < n_boundary; i++) { for (j = 0; j < ns_in2; j++) { for (k = 0; k < ns_in2; k++) { /* Face up and right from (j, k). */ avg4(co, mesh_vert(vm_in, i, j, k), mesh_vert(vm_in, i, j, k + 1), mesh_vert(vm_in, i, j + 1, k), mesh_vert(vm_in, i, j + 1, k + 1)); copy_v3_v3(mesh_vert(vm_out, i, 2 * j + 1, 2 * k + 1)->co, co); } } } /* The new vertical edge vertices. */ for (i = 0; i < n_boundary; i++) { for (j = 0; j < ns_in2; j++) { for (k = 1; k <= ns_in2; k++) { /* Vertical edge between (j, k) and (j+1, k). */ avg4(co, mesh_vert(vm_in, i, j, k), mesh_vert(vm_in, i, j + 1, k), mesh_vert_canon(vm_out, i, 2 * j + 1, 2 * k - 1), mesh_vert_canon(vm_out, i, 2 * j + 1, 2 * k + 1)); copy_v3_v3(mesh_vert(vm_out, i, 2 * j + 1, 2 * k)->co, co); } } } /* The new horizontal edge vertices. */ for (i = 0; i < n_boundary; i++) { for (j = 1; j < ns_in2; j++) { for (k = 0; k < ns_in2; k++) { /* Horizontal edge between (j, k) and (j, k+1). */ avg4(co, mesh_vert(vm_in, i, j, k), mesh_vert(vm_in, i, j, k + 1), mesh_vert_canon(vm_out, i, 2 * j - 1, 2 * k + 1), mesh_vert_canon(vm_out, i, 2 * j + 1, 2 * k + 1)); copy_v3_v3(mesh_vert(vm_out, i, 2 * j, 2 * k + 1)->co, co); } } } /* The new vertices, not on border. */ gamma = 0.25f; beta = -gamma; for (i = 0; i < n_boundary; i++) { for (j = 1; j < ns_in2; j++) { for (k = 1; k <= ns_in2; k++) { /* co1 = centroid of adjacent new edge verts. */ avg4(co1, mesh_vert_canon(vm_out, i, 2 * j, 2 * k - 1), mesh_vert_canon(vm_out, i, 2 * j, 2 * k + 1), mesh_vert_canon(vm_out, i, 2 * j - 1, 2 * k), mesh_vert_canon(vm_out, i, 2 * j + 1, 2 * k)); /* co2 = centroid of adjacent new face verts. */ avg4(co2, mesh_vert_canon(vm_out, i, 2 * j - 1, 2 * k - 1), mesh_vert_canon(vm_out, i, 2 * j + 1, 2 * k - 1), mesh_vert_canon(vm_out, i, 2 * j - 1, 2 * k + 1), mesh_vert_canon(vm_out, i, 2 * j + 1, 2 * k + 1)); /* Combine with original vert with alpha, beta, gamma factors. */ copy_v3_v3(co, co1); /* Alpha = 1.0. */ madd_v3_v3fl(co, co2, beta); madd_v3_v3fl(co, mesh_vert(vm_in, i, j, k)->co, gamma); copy_v3_v3(mesh_vert(vm_out, i, 2 * j, 2 * k)->co, co); } } } vmesh_copy_equiv_verts(vm_out); /* The center vertex is special. */ gamma = sabin_gamma(n_boundary); beta = -gamma; /* Accumulate edge verts in co1, face verts in co2. */ zero_v3(co1); zero_v3(co2); for (i = 0; i < n_boundary; i++) { add_v3_v3(co1, mesh_vert(vm_out, i, ns_in, ns_in - 1)->co); add_v3_v3(co2, mesh_vert(vm_out, i, ns_in - 1, ns_in - 1)->co); add_v3_v3(co2, mesh_vert(vm_out, i, ns_in - 1, ns_in + 1)->co); } copy_v3_v3(co, co1); mul_v3_fl(co, 1.0f / (float)n_boundary); madd_v3_v3fl(co, co2, beta / (2.0f * (float)n_boundary)); madd_v3_v3fl(co, mesh_vert(vm_in, 0, ns_in2, ns_in2)->co, gamma); for (i = 0; i < n_boundary; i++) { copy_v3_v3(mesh_vert(vm_out, i, ns_in, ns_in)->co, co); } /* Final step: Copy the profile vertices to the VMesh's boundary. */ bndv = vm_out->boundstart; for (i = 0; i < n_boundary; i++) { inext = (i + 1) % n_boundary; for (k = 0; k <= ns_out; k++) { get_profile_point(bp, &bndv->profile, k, ns_out, co); copy_v3_v3(mesh_vert(vm_out, i, 0, k)->co, co); if (k >= ns_in && k < ns_out) { copy_v3_v3(mesh_vert(vm_out, inext, ns_out - k, 0)->co, co); } } bndv = bndv->next; } return vm_out; } /* Special case for cube corner, when r is PRO_SQUARE_R, meaning straight sides. */ static VMesh *make_cube_corner_square(MemArena *mem_arena, int nseg) { VMesh *vm; float co[3]; int i, j, k, ns2; ns2 = nseg / 2; vm = new_adj_vmesh(mem_arena, 3, nseg, NULL); vm->count = 0; /* Reset, so the following loop will end up with correct count. */ for (i = 0; i < 3; i++) { zero_v3(co); co[i] = 1.0f; add_new_bound_vert(mem_arena, vm, co); } for (i = 0; i < 3; i++) { for (j = 0; j <= ns2; j++) { for (k = 0; k <= ns2; k++) { if (!is_canon(vm, i, j, k)) { continue; } co[i] = 1.0f; co[(i + 1) % 3] = (float)k * 2.0f / (float)nseg; co[(i + 2) % 3] = (float)j * 2.0f / (float)nseg; copy_v3_v3(mesh_vert(vm, i, j, k)->co, co); } } } vmesh_copy_equiv_verts(vm); return vm; } /** * Special case for cube corner, when r is PRO_SQUARE_IN_R, meaning inward * straight sides. * We mostly don't want a VMesh at all for this case -- just a three-way weld * with a triangle in the middle for odd nseg. */ static VMesh *make_cube_corner_square_in(MemArena *mem_arena, int nseg) { VMesh *vm; float co[3]; float b; int i, k, ns2, odd; ns2 = nseg / 2; odd = nseg % 2; vm = new_adj_vmesh(mem_arena, 3, nseg, NULL); vm->count = 0; /* Reset, so following loop will end up with correct count. */ for (i = 0; i < 3; i++) { zero_v3(co); co[i] = 1.0f; add_new_bound_vert(mem_arena, vm, co); } if (odd) { b = 2.0f / (2.0f * (float)ns2 + (float)M_SQRT2); } else { b = 2.0f / (float)nseg; } for (i = 0; i < 3; i++) { for (k = 0; k <= ns2; k++) { co[i] = 1.0f - (float)k * b; co[(i + 1) % 3] = 0.0f; co[(i + 2) % 3] = 0.0f; copy_v3_v3(mesh_vert(vm, i, 0, k)->co, co); co[(i + 1) % 3] = 1.0f - (float)k * b; co[(i + 2) % 3] = 0.0f; co[i] = 0.0f; copy_v3_v3(mesh_vert(vm, i, 0, nseg - k)->co, co); } } return vm; } /** * Make a VMesh with nseg segments that covers the unit radius sphere octant * with center at (0,0,0). * This has BoundVerts at (1,0,0), (0,1,0) and (0,0,1), with quarter circle arcs * on the faces for the orthogonal planes through the origin. */ static VMesh *make_cube_corner_adj_vmesh(BevelParams *bp) { MemArena *mem_arena = bp->mem_arena; int nseg = bp->seg; float r = bp->pro_super_r; VMesh *vm0, *vm1; BoundVert *bndv; int i, j, k, ns2; float co[3], coc[3]; if (bp->profile_type != BEVEL_PROFILE_CUSTOM) { if (r == PRO_SQUARE_R) { return make_cube_corner_square(mem_arena, nseg); } if (r == PRO_SQUARE_IN_R) { return make_cube_corner_square_in(mem_arena, nseg); } } /* Initial mesh has 3 sides and 2 segments on each side. */ vm0 = new_adj_vmesh(mem_arena, 3, 2, NULL); vm0->count = 0; /* Reset, so the following loop will end up with correct count. */ for (i = 0; i < 3; i++) { zero_v3(co); co[i] = 1.0f; add_new_bound_vert(mem_arena, vm0, co); } bndv = vm0->boundstart; for (i = 0; i < 3; i++) { /* Get point, 1/2 of the way around profile, on arc between this and next. */ coc[i] = 1.0f; coc[(i + 1) % 3] = 1.0f; coc[(i + 2) % 3] = 0.0f; bndv->profile.super_r = r; copy_v3_v3(bndv->profile.start, bndv->nv.co); copy_v3_v3(bndv->profile.end, bndv->next->nv.co); copy_v3_v3(bndv->profile.middle, coc); copy_v3_v3(mesh_vert(vm0, i, 0, 0)->co, bndv->profile.start); copy_v3_v3(bndv->profile.plane_co, bndv->profile.start); cross_v3_v3v3(bndv->profile.plane_no, bndv->profile.start, bndv->profile.end); copy_v3_v3(bndv->profile.proj_dir, bndv->profile.plane_no); /* Calculate profiles again because we started over with new boundverts. */ calculate_profile(bp, bndv, false, false); /* No custom profiles in this case. */ /* Just building the boundaries here, so sample the profile halfway through. */ get_profile_point(bp, &bndv->profile, 1, 2, mesh_vert(vm0, i, 0, 1)->co); bndv = bndv->next; } /* Center vertex. */ copy_v3_fl(co, (float)M_SQRT1_3); if (nseg > 2) { if (r > 1.5f) { mul_v3_fl(co, 1.4f); } else if (r < 0.75f) { mul_v3_fl(co, 0.6f); } } copy_v3_v3(mesh_vert(vm0, 0, 1, 1)->co, co); vmesh_copy_equiv_verts(vm0); vm1 = vm0; while (vm1->seg < nseg) { vm1 = cubic_subdiv(bp, vm1); } if (vm1->seg != nseg) { vm1 = interp_vmesh(bp, vm1, nseg); } /* Now snap each vertex to the superellipsoid. */ ns2 = nseg / 2; for (i = 0; i < 3; i++) { for (j = 0; j <= ns2; j++) { for (k = 0; k <= nseg; k++) { snap_to_superellipsoid(mesh_vert(vm1, i, j, k)->co, r, false); } } } return vm1; } /* Is this a good candidate for using tri_corner_adj_vmesh? */ static int tri_corner_test(BevelParams *bp, BevVert *bv) { float ang, absang, totang, angdiff; EdgeHalf *e; int i; int in_plane_e = 0; /* The superellipse snapping of this case isn't helpful with custom profiles enabled. */ if (bp->affect_type == BEVEL_AFFECT_VERTICES || bp->profile_type == BEVEL_PROFILE_CUSTOM) { return -1; } if (bv->vmesh->count != 3) { return 0; } /* Only use the tri-corner special case if the offset is the same for every edge. */ float offset = bv->edges[0].offset_l; totang = 0.0f; for (i = 0; i < bv->edgecount; i++) { e = &bv->edges[i]; ang = BM_edge_calc_face_angle_signed_ex(e->e, 0.0f); absang = fabsf(ang); if (absang <= M_PI_4) { in_plane_e++; } else if (absang >= 3.0f * (float)M_PI_4) { return -1; } if (e->is_bev && !compare_ff(e->offset_l, offset, BEVEL_EPSILON)) { return -1; } totang += ang; } if (in_plane_e != bv->edgecount - 3) { return -1; } angdiff = fabsf(fabsf(totang) - 3.0f * (float)M_PI_2); if ((bp->pro_super_r == PRO_SQUARE_R && angdiff > (float)M_PI / 16.0f) || (angdiff > (float)M_PI_4)) { return -1; } if (bv->edgecount != 3 || bv->selcount != 3) { return 0; } return 1; } static VMesh *tri_corner_adj_vmesh(BevelParams *bp, BevVert *bv) { int i, j, k, ns, ns2; float co0[3], co1[3], co2[3]; float mat[4][4], v[4]; VMesh *vm; BoundVert *bndv; bndv = bv->vmesh->boundstart; copy_v3_v3(co0, bndv->nv.co); bndv = bndv->next; copy_v3_v3(co1, bndv->nv.co); bndv = bndv->next; copy_v3_v3(co2, bndv->nv.co); make_unit_cube_map(co0, co1, co2, bv->v->co, mat); ns = bp->seg; ns2 = ns / 2; vm = make_cube_corner_adj_vmesh(bp); for (i = 0; i < 3; i++) { for (j = 0; j <= ns2; j++) { for (k = 0; k <= ns; k++) { copy_v3_v3(v, mesh_vert(vm, i, j, k)->co); v[3] = 1.0f; mul_m4_v4(mat, v); copy_v3_v3(mesh_vert(vm, i, j, k)->co, v); } } } return vm; } /* Makes the mesh that replaces the original vertex, bounded by the profiles on the sides. */ static VMesh *adj_vmesh(BevelParams *bp, BevVert *bv) { int n_bndv, nseg, i; VMesh *vm0, *vm1; float boundverts_center[3], original_vertex[3], negative_fullest[3], center_direction[3]; BoundVert *bndv; MemArena *mem_arena = bp->mem_arena; float fullness; n_bndv = bv->vmesh->count; /* Same bevel as that of 3 edges of vert in a cube. */ if (n_bndv == 3 && tri_corner_test(bp, bv) != -1 && bp->pro_super_r != PRO_SQUARE_IN_R) { return tri_corner_adj_vmesh(bp, bv); } /* First construct an initial control mesh, with nseg == 2. */ nseg = bv->vmesh->seg; vm0 = new_adj_vmesh(mem_arena, n_bndv, 2, bv->vmesh->boundstart); /* Find the center of the boundverts that make up the vmesh. */ bndv = vm0->boundstart; zero_v3(boundverts_center); for (i = 0; i < n_bndv; i++) { /* Boundaries just divide input polygon edges into 2 even segments. */ copy_v3_v3(mesh_vert(vm0, i, 0, 0)->co, bndv->nv.co); get_profile_point(bp, &bndv->profile, 1, 2, mesh_vert(vm0, i, 0, 1)->co); add_v3_v3(boundverts_center, bndv->nv.co); bndv = bndv->next; } mul_v3_fl(boundverts_center, 1.0f / (float)n_bndv); /* To place the center vertex: * 'negative_fullest' is the reflection of the original vertex across the boundverts' center. * 'fullness' is the fraction of the way from the boundvert's centroid to the original vertex * (if positive) or to negative_fullest (if negative). */ copy_v3_v3(original_vertex, bv->v->co); sub_v3_v3v3(negative_fullest, boundverts_center, original_vertex); add_v3_v3(negative_fullest, boundverts_center); /* Find the vertex mesh's start center with the profile's fullness. */ fullness = bp->pro_spacing.fullness; sub_v3_v3v3(center_direction, original_vertex, boundverts_center); if (len_squared_v3(center_direction) > BEVEL_EPSILON_SQ) { if (bp->profile_type == BEVEL_PROFILE_CUSTOM) { fullness *= 2.0f; madd_v3_v3v3fl(mesh_vert(vm0, 0, 1, 1)->co, negative_fullest, center_direction, fullness); } else { madd_v3_v3v3fl(mesh_vert(vm0, 0, 1, 1)->co, boundverts_center, center_direction, fullness); } } else { copy_v3_v3(mesh_vert(vm0, 0, 1, 1)->co, boundverts_center); } vmesh_copy_equiv_verts(vm0); /* Do the subdivision process to go from the two segment start mesh to the final vertex mesh. */ vm1 = vm0; do { vm1 = cubic_subdiv(bp, vm1); } while (vm1->seg < nseg); if (vm1->seg != nseg) { vm1 = interp_vmesh(bp, vm1, nseg); } return vm1; } /** * Snap co to the closest point on the profile for vpipe projected onto the plane * containing co with normal in the direction of edge vpipe->ebev. * For the square profiles, need to decide whether to snap to just one plane * or to the midpoint of the profile; do so if midline is true. */ static void snap_to_pipe_profile(BoundVert *vpipe, bool midline, float co[3]) { float va[3], vb[3], edir[3], va0[3], vb0[3], vmid0[3]; float plane[4], m[4][4], minv[4][4], p[3], snap[3]; Profile *pro = &vpipe->profile; EdgeHalf *e = vpipe->ebev; copy_v3_v3(va, pro->start); copy_v3_v3(vb, pro->end); if (compare_v3v3(va, vb, BEVEL_EPSILON_D)) { copy_v3_v3(co, va); return; } /* Get a plane with the normal pointing along the beveled edge. */ sub_v3_v3v3(edir, e->e->v1->co, e->e->v2->co); plane_from_point_normal_v3(plane, co, edir); closest_to_plane_v3(va0, plane, va); closest_to_plane_v3(vb0, plane, vb); closest_to_plane_v3(vmid0, plane, pro->middle); if (make_unit_square_map(va0, vmid0, vb0, m) && invert_m4_m4(minv, m)) { /* Transform co and project it onto superellipse. */ mul_v3_m4v3(p, minv, co); snap_to_superellipsoid(p, pro->super_r, midline); mul_v3_m4v3(snap, m, p); copy_v3_v3(co, snap); } else { /* Planar case: just snap to line va0--vb0. */ closest_to_line_segment_v3(p, co, va0, vb0); copy_v3_v3(co, p); } } /** * See pipe_test for conditions that make 'pipe'; vpipe is the return value from that. * We want to make an ADJ mesh but then snap the vertices to the profile in a plane * perpendicular to the pipes. */ static VMesh *pipe_adj_vmesh(BevelParams *bp, BevVert *bv, BoundVert *vpipe) { int i, j, k, n_bndv, ns, half_ns, ipipe1, ipipe2, ring; VMesh *vm; bool even, midline; float *profile_point_pipe1, *profile_point_pipe2, f; /* Some unnecessary overhead running this subdivision with custom profile snapping later on. */ vm = adj_vmesh(bp, bv); /* Now snap all interior coordinates to be on the epipe profile. */ n_bndv = bv->vmesh->count; ns = bv->vmesh->seg; half_ns = ns / 2; even = (ns % 2) == 0; ipipe1 = vpipe->index; ipipe2 = vpipe->next->next->index; for (i = 0; i < n_bndv; i++) { for (j = 1; j <= half_ns; j++) { for (k = 0; k <= half_ns; k++) { if (!is_canon(vm, i, j, k)) { continue; } /* With a custom profile just copy the shape of the profile at each ring. */ if (bp->profile_type == BEVEL_PROFILE_CUSTOM) { /* Find both profile vertices that correspond to this point. */ if (i == ipipe1 || i == ipipe2) { if (n_bndv == 3 && i == ipipe1) { /* This part of the vmesh is the triangular corner between the two pipe profiles. */ ring = max_ii(j, k); profile_point_pipe2 = mesh_vert(vm, i, 0, ring)->co; profile_point_pipe1 = mesh_vert(vm, i, ring, 0)->co; /* End profile index increases with k on one side and j on the other. */ f = ((k < j) ? min_ff(j, k) : ((2.0f * ring) - j)) / (2.0f * ring); } else { /* This is part of either pipe profile boundvert area in the 4-way intersection. */ profile_point_pipe1 = mesh_vert(vm, i, 0, k)->co; profile_point_pipe2 = mesh_vert(vm, (i == ipipe1) ? ipipe2 : ipipe1, 0, ns - k)->co; f = (float)j / (float)ns; /* The ring index brings us closer to the other side. */ } } else { /* The profile vertices are on both ends of each of the side profile's rings. */ profile_point_pipe1 = mesh_vert(vm, i, j, 0)->co; profile_point_pipe2 = mesh_vert(vm, i, j, ns)->co; f = (float)k / (float)ns; /* Ring runs along the pipe, so segment is used here. */ } /* Place the vertex by interpolatin between the two profile points using the factor. */ interp_v3_v3v3(mesh_vert(vm, i, j, k)->co, profile_point_pipe1, profile_point_pipe2, f); } else { /* A tricky case is for the 'square' profiles and an even nseg: we want certain * vertices to snap to the midline on the pipe, not just to one plane or the other. */ midline = even && k == half_ns && ((i == 0 && j == half_ns) || (i == ipipe1 || i == ipipe2)); snap_to_pipe_profile(vpipe, midline, mesh_vert(vm, i, j, k)->co); } } } } return vm; } static void get_incident_edges(BMFace *f, BMVert *v, BMEdge **r_e1, BMEdge **r_e2) { BMIter iter; BMEdge *e; *r_e1 = NULL; *r_e2 = NULL; if (!f) { return; } BM_ITER_ELEM (e, &iter, f, BM_EDGES_OF_FACE) { if (e->v1 == v || e->v2 == v) { if (*r_e1 == NULL) { *r_e1 = e; } else if (*r_e2 == NULL) { *r_e2 = e; } } } } static BMEdge *find_closer_edge(float *co, BMEdge *e1, BMEdge *e2) { float dsq1, dsq2; BLI_assert(e1 != NULL && e2 != NULL); dsq1 = dist_squared_to_line_segment_v3(co, e1->v1->co, e1->v2->co); dsq2 = dist_squared_to_line_segment_v3(co, e2->v1->co, e2->v2->co); if (dsq1 < dsq2) { return e1; } return e2; } /* Snap co to the closest edge of face f. Return the edge in *r_snap_e, * the coordinates of snap point in r_ snap_co, * and the distance squared to the snap point as function return */ static float snap_face_dist_squared(float *co, BMFace *f, BMEdge **r_snap_e, float *r_snap_co) { BMIter iter; BMEdge *beste = NULL; float d2, beste_d2; BMEdge *e; float closest[3]; beste_d2 = 1e20f; BM_ITER_ELEM (e, &iter, f, BM_EDGES_OF_FACE) { closest_to_line_segment_v3(closest, co, e->v1->co, e->v2->co); d2 = len_squared_v3v3(closest, co); if (d2 < beste_d2) { beste_d2 = d2; beste = e; copy_v3_v3(r_snap_co, closest); } } *r_snap_e = beste; return beste_d2; } /* What would be the area of the polygon around bv if interpolated in face frep? */ static float interp_poly_area(BevVert *bv, BMFace *frep) { BoundVert *v; VMesh *vm = bv->vmesh; BMEdge *snape; int n; float(*uv_co)[3] = NULL; float area; BLI_assert(vm != NULL); uv_co = BLI_array_alloca(uv_co, vm->count); v = vm->boundstart; n = 0; do { BLI_assert(n < vm->count); snap_face_dist_squared(v->nv.v->co, frep, &snape, uv_co[n]); n++; } while ((v = v->next) != vm->boundstart); area = fabsf(area_poly_v3(uv_co, n)); return area; } /** * If we make a poly out of verts around \a bv, snapping to rep \a frep, * will uv poly have zero area? * The uv poly is made by snapping all `outside-of-frep` vertices to the closest edge in \a frep. * Sometimes this results in a zero or very small area polygon, which translates to a zero * or very small area polygon in UV space -- not good for interpolating textures. */ static bool is_bad_uv_poly(BevVert *bv, BMFace *frep) { float area = interp_poly_area(bv, frep); return area < BEVEL_EPSILON_BIG; } /** * Pick a good face from all the faces around \a bv to use for * a representative face, using choose_rep_face. * We want to choose from among the faces that would be * chosen for a single-segment edge polygon between two successive * Boundverts. * But the single beveled edge is a special case, * where we also want to consider the third face (else can get * zero-area UV interpolated face). * * If there are math-having custom loop layers, like UV, then * don't include faces that would result in zero-area UV polygons * if chosen as the rep. */ static BMFace *frep_for_center_poly(BevelParams *bp, BevVert *bv) { int i, j, fcount; BMFace **fchoices, *bmf, *bmf1, *bmf2, *any_bmf; BMFace *ftwo[2]; bool already_there; bool consider_all_faces; fcount = 0; any_bmf = NULL; consider_all_faces = bv->selcount == 1; /* Make an array that can hold maximum possible number of choices. */ fchoices = BLI_array_alloca(fchoices, bv->edgecount); for (i = 0; i < bv->edgecount; i++) { if (!bv->edges[i].is_bev && !consider_all_faces) { continue; } bmf1 = bv->edges[i].fprev; bmf2 = bv->edges[i].fnext; ftwo[0] = bmf1; ftwo[1] = bmf2; bmf = choose_rep_face(bp, ftwo, 2); if (bmf != NULL) { if (any_bmf == NULL) { any_bmf = bmf; } already_there = false; for (j = fcount - 1; j >= 0; j--) { if (fchoices[j] == bmf) { already_there = true; break; } } if (!already_there) { if (bp->math_layer_info.has_math_layers) { if (is_bad_uv_poly(bv, bmf)) { continue; } } fchoices[fcount++] = bmf; } } } if (fcount == 0) { return any_bmf; } return choose_rep_face(bp, fchoices, fcount); } static void build_center_ngon(BevelParams *bp, BMesh *bm, BevVert *bv, int mat_nr) { VMesh *vm = bv->vmesh; BoundVert *v; int i, ns2; BMFace *frep, *f; BMEdge *frep_e1, *frep_e2, *frep_e; BMVert **vv = NULL; BMFace **vf = NULL; BMEdge **ve = NULL; BLI_array_staticdeclare(vv, BM_DEFAULT_NGON_STACK_SIZE); BLI_array_staticdeclare(vf, BM_DEFAULT_NGON_STACK_SIZE); BLI_array_staticdeclare(ve, BM_DEFAULT_NGON_STACK_SIZE); ns2 = vm->seg / 2; if (bv->any_seam) { frep = frep_for_center_poly(bp, bv); get_incident_edges(frep, bv->v, &frep_e1, &frep_e2); } else { frep = NULL; frep_e1 = frep_e2 = NULL; } v = vm->boundstart; do { i = v->index; BLI_array_append(vv, mesh_vert(vm, i, ns2, ns2)->v); if (frep) { BLI_array_append(vf, frep); frep_e = find_closer_edge(mesh_vert(vm, i, ns2, ns2)->v->co, frep_e1, frep_e2); BLI_array_append(ve, v == vm->boundstart ? NULL : frep_e); } else { BLI_array_append(vf, boundvert_rep_face(v, NULL)); BLI_array_append(ve, NULL); } } while ((v = v->next) != vm->boundstart); f = bev_create_ngon(bm, vv, BLI_array_len(vv), vf, frep, ve, mat_nr, true); record_face_kind(bp, f, F_VERT); BLI_array_free(vv); BLI_array_free(vf); BLI_array_free(ve); } /** * Special case of #bevel_build_rings when triangle-corner and profile is 0. * There is no corner mesh except, if nseg odd, for a center poly. * Boundary verts merge with previous ones according to pattern: * (i, 0, k) merged with (i+1, 0, ns-k) for k <= ns/2. */ static void build_square_in_vmesh(BevelParams *bp, BMesh *bm, BevVert *bv, VMesh *vm1) { int n, ns, ns2, odd, i, k; VMesh *vm; vm = bv->vmesh; n = vm->count; ns = vm->seg; ns2 = ns / 2; odd = ns % 2; for (i = 0; i < n; i++) { for (k = 1; k < ns; k++) { copy_v3_v3(mesh_vert(vm, i, 0, k)->co, mesh_vert(vm1, i, 0, k)->co); if (i > 0 && k <= ns2) { mesh_vert(vm, i, 0, k)->v = mesh_vert(vm, i - 1, 0, ns - k)->v; } else if (i == n - 1 && k > ns2) { mesh_vert(vm, i, 0, k)->v = mesh_vert(vm, 0, 0, ns - k)->v; } else { create_mesh_bmvert(bm, vm, i, 0, k, bv->v); } } } if (odd) { for (i = 0; i < n; i++) { mesh_vert(vm, i, ns2, ns2)->v = mesh_vert(vm, i, 0, ns2)->v; } build_center_ngon(bp, bm, bv, bp->mat_nr); } } /** * Copy whichever of \a a and \a b is closer to v into \a r. */ static void closer_v3_v3v3v3(float r[3], float a[3], float b[3], float v[3]) { if (len_squared_v3v3(a, v) <= len_squared_v3v3(b, v)) { copy_v3_v3(r, a); } else { copy_v3_v3(r, b); } } /** * Special case of VMesh when profile == 1 and there are 3 or more beveled edges. * We want the effect of parallel offset lines (n/2 of them) * on each side of the center, for even n. * Wherever they intersect with each other between two successive beveled edges, * those intersections are part of the vmesh rings. * We have to move the boundary edges too -- the usual method is to make one profile plane between * successive BoundVerts, but for the effect we want here, there will be two planes, * one on each side of the original edge. * At the moment, this is not called for odd number of segments, though code does something if it * is. */ static VMesh *square_out_adj_vmesh(BevelParams *bp, BevVert *bv) { int n_bndv, ns, ns2, odd, i, j, k, ikind, im1, clstride, iprev, ang_kind; float bndco[3], dir1[3], dir2[3], co1[3], co2[3], meet1[3], meet2[3], v1co[3], v2co[3]; float *on_edge_cur, *on_edge_prev, *p; float ns2inv, finalfrac, ang; BoundVert *bndv; EdgeHalf *e1, *e2; VMesh *vm; float *centerline; bool *cset, v1set, v2set; n_bndv = bv->vmesh->count; ns = bv->vmesh->seg; ns2 = ns / 2; odd = ns % 2; ns2inv = 1.0f / (float)ns2; vm = new_adj_vmesh(bp->mem_arena, n_bndv, ns, bv->vmesh->boundstart); clstride = 3 * (ns2 + 1); centerline = MEM_mallocN((size_t)(clstride * n_bndv) * sizeof(float), "bevel"); cset = MEM_callocN((size_t)n_bndv * sizeof(bool), "bevel"); /* Find on_edge, place on bndv[i]'s elast where offset line would meet, * taking min-distance-to bv->v with position where next sector's offset line would meet. */ bndv = vm->boundstart; for (i = 0; i < n_bndv; i++) { copy_v3_v3(bndco, bndv->nv.co); e1 = bndv->efirst; e2 = bndv->elast; ang_kind = ANGLE_STRAIGHT; if (e1 && e2) { ang_kind = edges_angle_kind(e1, e2, bv->v); } if (bndv->is_patch_start) { mid_v3_v3v3(centerline + clstride * i, bndv->nv.co, bndv->next->nv.co); cset[i] = true; bndv = bndv->next; i++; mid_v3_v3v3(centerline + clstride * i, bndv->nv.co, bndv->next->nv.co); cset[i] = true; bndv = bndv->next; i++; /* Leave cset[i] where it was - probably false, unless i == n - 1. */ } else if (bndv->is_arc_start) { e1 = bndv->efirst; e2 = bndv->next->efirst; copy_v3_v3(centerline + clstride * i, bndv->profile.middle); bndv = bndv->next; cset[i] = true; i++; /* Leave cset[i] where it was - probably false, unless i == n - 1. */ } else if (ang_kind == ANGLE_SMALLER) { sub_v3_v3v3(dir1, e1->e->v1->co, e1->e->v2->co); sub_v3_v3v3(dir2, e2->e->v1->co, e2->e->v2->co); add_v3_v3v3(co1, bndco, dir1); add_v3_v3v3(co2, bndco, dir2); /* Intersect e1 with line through bndv parallel to e2 to get v1co. */ ikind = isect_line_line_v3(e1->e->v1->co, e1->e->v2->co, bndco, co2, meet1, meet2); if (ikind == 0) { v1set = false; } else { /* If the lines are skew (ikind == 2), want meet1 which is on e1. */ copy_v3_v3(v1co, meet1); v1set = true; } /* Intersect e2 with line through bndv parallel to e1 to get v2co. */ ikind = isect_line_line_v3(e2->e->v1->co, e2->e->v2->co, bndco, co1, meet1, meet2); if (ikind == 0) { v2set = false; } else { v2set = true; copy_v3_v3(v2co, meet1); } /* We want on_edge[i] to be min dist to bv->v of v2co and the v1co of next iteration. */ on_edge_cur = centerline + clstride * i; iprev = (i == 0) ? n_bndv - 1 : i - 1; on_edge_prev = centerline + clstride * iprev; if (v2set) { if (cset[i]) { closer_v3_v3v3v3(on_edge_cur, on_edge_cur, v2co, bv->v->co); } else { copy_v3_v3(on_edge_cur, v2co); cset[i] = true; } } if (v1set) { if (cset[iprev]) { closer_v3_v3v3v3(on_edge_prev, on_edge_prev, v1co, bv->v->co); } else { copy_v3_v3(on_edge_prev, v1co); cset[iprev] = true; } } } bndv = bndv->next; } /* Maybe not everything was set by the previous loop. */ bndv = vm->boundstart; for (i = 0; i < n_bndv; i++) { if (!cset[i]) { on_edge_cur = centerline + clstride * i; e1 = bndv->next->efirst; copy_v3_v3(co1, bndv->nv.co); copy_v3_v3(co2, bndv->next->nv.co); if (e1) { if (bndv->prev->is_arc_start && bndv->next->is_arc_start) { ikind = isect_line_line_v3(e1->e->v1->co, e1->e->v2->co, co1, co2, meet1, meet2); if (ikind != 0) { copy_v3_v3(on_edge_cur, meet1); cset[i] = true; } } else { if (bndv->prev->is_arc_start) { closest_to_line_segment_v3(on_edge_cur, co1, e1->e->v1->co, e1->e->v2->co); } else { closest_to_line_segment_v3(on_edge_cur, co2, e1->e->v1->co, e1->e->v2->co); } cset[i] = true; } } if (!cset[i]) { mid_v3_v3v3(on_edge_cur, co1, co2); cset[i] = true; } } bndv = bndv->next; } /* Fill in rest of center-lines by interpolation. */ copy_v3_v3(co2, bv->v->co); bndv = vm->boundstart; for (i = 0; i < n_bndv; i++) { if (odd) { ang = 0.5f * angle_v3v3v3(bndv->nv.co, co1, bndv->next->nv.co); if (ang > BEVEL_SMALL_ANG) { /* finalfrac is the length along arms of isosceles triangle with top angle 2*ang * such that the base of the triangle is 1. * This is used in interpolation along center-line in odd case. * To avoid too big a drop from bv, cap finalfrac a 0.8 arbitrarily */ finalfrac = 0.5f / sinf(ang); if (finalfrac > 0.8f) { finalfrac = 0.8f; } } else { finalfrac = 0.8f; } ns2inv = 1.0f / (ns2 + finalfrac); } p = centerline + clstride * i; copy_v3_v3(co1, p); p += 3; for (j = 1; j <= ns2; j++) { interp_v3_v3v3(p, co1, co2, j * ns2inv); p += 3; } bndv = bndv->next; } /* Coords of edges and mid or near-mid line. */ bndv = vm->boundstart; for (i = 0; i < n_bndv; i++) { copy_v3_v3(co1, bndv->nv.co); copy_v3_v3(co2, centerline + clstride * (i == 0 ? n_bndv - 1 : i - 1)); for (j = 0; j < ns2 + odd; j++) { interp_v3_v3v3(mesh_vert(vm, i, j, 0)->co, co1, co2, j * ns2inv); } copy_v3_v3(co2, centerline + clstride * i); for (k = 1; k <= ns2; k++) { interp_v3_v3v3(mesh_vert(vm, i, 0, k)->co, co1, co2, k * ns2inv); } bndv = bndv->next; } if (!odd) { copy_v3_v3(mesh_vert(vm, 0, ns2, ns2)->co, bv->v->co); } vmesh_copy_equiv_verts(vm); /* Fill in interior points by interpolation from edges to center-lines. */ bndv = vm->boundstart; for (i = 0; i < n_bndv; i++) { im1 = (i == 0) ? n_bndv - 1 : i - 1; for (j = 1; j < ns2 + odd; j++) { for (k = 1; k <= ns2; k++) { ikind = isect_line_line_v3(mesh_vert(vm, i, 0, k)->co, centerline + clstride * im1 + 3 * k, mesh_vert(vm, i, j, 0)->co, centerline + clstride * i + 3 * j, meet1, meet2); if (ikind == 0) { /* How can this happen? fall back on interpolation in one direction if it does. */ interp_v3_v3v3(mesh_vert(vm, i, j, k)->co, mesh_vert(vm, i, 0, k)->co, centerline + clstride * im1 + 3 * k, j * ns2inv); } else if (ikind == 1) { copy_v3_v3(mesh_vert(vm, i, j, k)->co, meet1); } else { mid_v3_v3v3(mesh_vert(vm, i, j, k)->co, meet1, meet2); } } } bndv = bndv->next; } vmesh_copy_equiv_verts(vm); MEM_freeN(centerline); MEM_freeN(cset); return vm; } /** * Given that the boundary is built and the boundary #BMVert's have been made, * calculate the positions of the interior mesh points for the M_ADJ pattern, * using cubic subdivision, then make the #BMVert's and the new faces. */ static void bevel_build_rings(BevelParams *bp, BMesh *bm, BevVert *bv, BoundVert *vpipe) { int n_bndv, ns, ns2, odd, i, j, k, ring; VMesh *vm1, *vm; BoundVert *bndv; BMVert *bmv1, *bmv2, *bmv3, *bmv4; BMFace *f, *f2, *r_f, *fc; BMFace *fchoices[2]; BMEdge *bme, *bme1, *bme2, *bme3; EdgeHalf *e; int mat_nr = bp->mat_nr; n_bndv = bv->vmesh->count; ns = bv->vmesh->seg; ns2 = ns / 2; odd = ns % 2; BLI_assert(n_bndv >= 3 && ns > 1); if (bp->pro_super_r == PRO_SQUARE_R && bv->selcount >= 3 && !odd && bp->profile_type != BEVEL_PROFILE_CUSTOM) { vm1 = square_out_adj_vmesh(bp, bv); } else if (vpipe) { vm1 = pipe_adj_vmesh(bp, bv, vpipe); } else if (tri_corner_test(bp, bv) == 1) { vm1 = tri_corner_adj_vmesh(bp, bv); /* The PRO_SQUARE_IN_R profile has boundary edges that merge * and no internal ring polys except possibly center ngon. */ if (bp->pro_super_r == PRO_SQUARE_IN_R && bp->profile_type != BEVEL_PROFILE_CUSTOM) { build_square_in_vmesh(bp, bm, bv, vm1); return; } } else { vm1 = adj_vmesh(bp, bv); } /* Copy final vmesh into bv->vmesh, make BMVerts and BMFaces. */ vm = bv->vmesh; for (i = 0; i < n_bndv; i++) { for (j = 0; j <= ns2; j++) { for (k = 0; k <= ns; k++) { if (j == 0 && (k == 0 || k == ns)) { continue; /* Boundary corners already made. */ } if (!is_canon(vm, i, j, k)) { continue; } copy_v3_v3(mesh_vert(vm, i, j, k)->co, mesh_vert(vm1, i, j, k)->co); create_mesh_bmvert(bm, vm, i, j, k, bv->v); } } } vmesh_copy_equiv_verts(vm); /* Make the polygons. */ bndv = vm->boundstart; do { i = bndv->index; f = boundvert_rep_face(bndv, NULL); f2 = boundvert_rep_face(bndv->next, NULL); fchoices[0] = f; fchoices[1] = f2; if (odd) { fc = choose_rep_face(bp, fchoices, 2); } else { fc = NULL; } if (bp->affect_type == BEVEL_AFFECT_VERTICES) { e = bndv->efirst; } else { e = bndv->ebev; } bme = e ? e->e : NULL; /* For odd ns, make polys with lower left corner at (i,j,k) for * j in [0, ns2-1], k in [0, ns2]. And then the center ngon. * For even ns, * j in [0, ns2-1], k in [0, ns2-1]. * * Recall: j is ring index, k is segment index. */ for (j = 0; j < ns2; j++) { for (k = 0; k < ns2 + odd; k++) { bmv1 = mesh_vert(vm, i, j, k)->v; bmv2 = mesh_vert(vm, i, j, k + 1)->v; bmv3 = mesh_vert(vm, i, j + 1, k + 1)->v; bmv4 = mesh_vert(vm, i, j + 1, k)->v; BLI_assert(bmv1 && bmv2 && bmv3 && bmv4); if (bp->affect_type == BEVEL_AFFECT_VERTICES) { if (j < k) { if (k == ns2 && j == ns2 - 1) { r_f = bev_create_quad_ex(bm, bmv1, bmv2, bmv3, bmv4, f2, f2, f2, f2, NULL, NULL, bndv->next->efirst->e, bme, f2, mat_nr); } else { r_f = bev_create_quad(bm, bmv1, bmv2, bmv3, bmv4, f2, f2, f2, f2, mat_nr); } } else if (j > k) { r_f = bev_create_quad(bm, bmv1, bmv2, bmv3, bmv4, f2, f2, f2, f2, mat_nr); } else { /* j == k */ /* Only one edge attached to v, since vertex only. */ if (e->is_seam) { r_f = bev_create_quad_ex( bm, bmv1, bmv2, bmv3, bmv4, f2, f2, f2, f2, bme, NULL, bme, NULL, f2, mat_nr); } else { r_f = bev_create_quad_ex( bm, bmv1, bmv2, bmv3, bmv4, f2, f2, f2, f, bme, NULL, bme, NULL, f2, mat_nr); } } } else { /* Edge bevel. */ if (odd) { if (k == ns2) { if (e && e->is_seam) { r_f = bev_create_quad_ex( bm, bmv1, bmv2, bmv3, bmv4, fc, fc, fc, fc, NULL, bme, bme, NULL, fc, mat_nr); } else { r_f = bev_create_quad_ex( bm, bmv1, bmv2, bmv3, bmv4, f, f2, f2, f, NULL, bme, bme, NULL, fc, mat_nr); } } else { r_f = bev_create_quad(bm, bmv1, bmv2, bmv3, bmv4, f, f, f, f, mat_nr); } } else { bme1 = k == ns2 - 1 ? bme : NULL; bme3 = NULL; if (j == ns2 - 1 && bndv->prev->ebev) { bme3 = bndv->prev->ebev->e; } bme2 = bme1 != NULL ? bme1 : bme3; r_f = bev_create_quad_ex( bm, bmv1, bmv2, bmv3, bmv4, f, f, f, f, NULL, bme1, bme2, bme3, f, mat_nr); } } record_face_kind(bp, r_f, F_VERT); } } } while ((bndv = bndv->next) != vm->boundstart); /* Fix UVs along center lines if even number of segments. */ if (!odd) { bndv = vm->boundstart; do { i = bndv->index; if (!bndv->any_seam) { for (ring = 1; ring < ns2; ring++) { BMVert *v_uv = mesh_vert(vm, i, ring, ns2)->v; if (v_uv) { bev_merge_uvs(bm, v_uv); } } } } while ((bndv = bndv->next) != vm->boundstart); bmv1 = mesh_vert(vm, 0, ns2, ns2)->v; if (bp->affect_type == BEVEL_AFFECT_VERTICES || count_bound_vert_seams(bv) <= 1) { bev_merge_uvs(bm, bmv1); } } /* Center ngon. */ if (odd) { build_center_ngon(bp, bm, bv, mat_nr); } } /** * Builds the vertex mesh when the vertex mesh type is set to "cut off" with a face closing * off each incoming edge's profile. * * TODO(Hans): Make cutoff VMesh work with outer miter != sharp. This should be possible but there * are two problems currently: * - Miter profiles don't have plane_no filled, so down direction is incorrect. * - Indexing profile points of miters with (i, 0, k) seems to return zero except for the first * and last profile point. * TODO(Hans): Use repface / edge arrays for UV interpolation properly. */ static void bevel_build_cutoff(BevelParams *bp, BMesh *bm, BevVert *bv) { #ifdef DEBUG_CUSTOM_PROFILE_CUTOFF printf("BEVEL BUILD CUTOFF\n"); # define F3(v) (v)[0], (v)[1], (v)[2] int j; #endif int i; int n_bndv = bv->vmesh->count; BoundVert *bndv; float length; float down_direction[3], new_vert[3]; bool build_center_face; /* BMFace *repface; */ BMVert **face_bmverts = NULL; BMEdge **bmedges = NULL; BMFace **bmfaces = NULL; /* Find the locations for the corner vertices at the bottom of the cutoff faces. */ bndv = bv->vmesh->boundstart; do { i = bndv->index; /* Find the "down" direction for this side of the cutoff face. */ /* Find the direction along the intersection of the two adjacent profile normals. */ cross_v3_v3v3(down_direction, bndv->profile.plane_no, bndv->prev->profile.plane_no); if (dot_v3v3(down_direction, bv->v->no) > 0.0f) { negate_v3(down_direction); } /* Move down from the boundvert by average profile height from the two adjacent profiles. */ length = (bndv->profile.height / sqrtf(2.0f) + bndv->prev->profile.height / sqrtf(2.0f)) / 2; madd_v3_v3v3fl(new_vert, bndv->nv.co, down_direction, length); /* Use this location for this profile's first corner vert and the last profile's second. */ copy_v3_v3(mesh_vert(bv->vmesh, i, 1, 0)->co, new_vert); copy_v3_v3(mesh_vert(bv->vmesh, bndv->prev->index, 1, 1)->co, new_vert); } while ((bndv = bndv->next) != bv->vmesh->boundstart); #ifdef DEBUG_CUSTOM_PROFILE_CUTOFF printf("Corner vertices:\n"); for (j = 0; j < n_bndv; j++) { printf(" (%.3f, %.3f, %.3f)\n", F3(mesh_vert(bv->vmesh, j, 1, 0)->co)); } #endif /* Disable the center face if the corner vertices share the same location. */ build_center_face = true; if (n_bndv == 3) { /* Vertices only collapse with a 3-way VMesh. */ build_center_face &= len_squared_v3v3(mesh_vert(bv->vmesh, 0, 1, 0)->co, mesh_vert(bv->vmesh, 1, 1, 0)->co) > BEVEL_EPSILON; build_center_face &= len_squared_v3v3(mesh_vert(bv->vmesh, 0, 1, 0)->co, mesh_vert(bv->vmesh, 2, 1, 0)->co) > BEVEL_EPSILON; build_center_face &= len_squared_v3v3(mesh_vert(bv->vmesh, 1, 1, 0)->co, mesh_vert(bv->vmesh, 2, 1, 0)->co) > BEVEL_EPSILON; } #ifdef DEBUG_CUSTOM_PROFILE_CUTOFF printf("build_center_face: %d\n", build_center_face); #endif /* Create the corner vertex BMVerts. */ if (build_center_face) { do { i = bndv->index; create_mesh_bmvert(bm, bv->vmesh, i, 1, 0, bv->v); /* The second corner vertex for the previous profile shares this BMVert. */ mesh_vert(bv->vmesh, bndv->prev->index, 1, 1)->v = mesh_vert(bv->vmesh, i, 1, 0)->v; } while ((bndv = bndv->next) != bv->vmesh->boundstart); } else { /* Use the same BMVert for all of the corner vertices. */ create_mesh_bmvert(bm, bv->vmesh, 0, 1, 0, bv->v); for (i = 1; i < n_bndv; i++) { mesh_vert(bv->vmesh, i, 1, 0)->v = mesh_vert(bv->vmesh, 0, 1, 0)->v; } } /* Build the profile cutoff faces. */ /* Extra one or two for corner vertices and one for last point along profile, or the size of the * center face array if it's bigger. */ #ifdef DEBUG_CUSTOM_PROFILE_CUTOFF printf("Building profile cutoff faces.\n"); #endif face_bmverts = BLI_memarena_alloc( bp->mem_arena, ((size_t)max_ii(bp->seg + 2 + build_center_face, n_bndv) * sizeof(BMVert *))); bndv = bv->vmesh->boundstart; do { i = bndv->index; BLI_array_staticdeclare(bmedges, BM_DEFAULT_NGON_STACK_SIZE); BLI_array_staticdeclare(bmfaces, BM_DEFAULT_NGON_STACK_SIZE); /* Add the first corner vertex under this boundvert. */ face_bmverts[0] = mesh_vert(bv->vmesh, i, 1, 0)->v; #ifdef DEBUG_CUSTOM_PROFILE_CUTOFF printf("Profile Number %d:\n", i); if (bndv->is_patch_start || bndv->is_arc_start) { printf(" Miter profile\n"); } printf(" Corner 1: (%0.3f, %0.3f, %0.3f)\n", F3(mesh_vert(bv->vmesh, i, 1, 0)->co)); #endif /* Add profile point vertices to the face, including the last one. */ for (int k = 0; k < bp->seg + 1; k++) { face_bmverts[k + 1] = mesh_vert(bv->vmesh, i, 0, k)->v; /* Leave room for first vert. */ #ifdef DEBUG_CUSTOM_PROFILE_CUTOFF printf(" Profile %d: (%0.3f, %0.3f, %0.3f)\n", k, F3(mesh_vert(bv->vmesh, i, 0, k)->co)); #endif } /* Add the second corner vert to complete the bottom of the face. */ if (build_center_face) { face_bmverts[bp->seg + 2] = mesh_vert(bv->vmesh, i, 1, 1)->v; #ifdef DEBUG_CUSTOM_PROFILE_CUTOFF printf(" Corner 2: (%0.3f, %0.3f, %0.3f)\n", F3(mesh_vert(bv->vmesh, i, 1, 1)->co)); #endif } /* Create the profile cutoff face for this boundvert. */ /* repface = boundvert_rep_face(bndv, NULL); */ bev_create_ngon(bm, face_bmverts, bp->seg + 2 + build_center_face, bmfaces, NULL, bmedges, bp->mat_nr, true); BLI_array_free(bmedges); BLI_array_free(bmfaces); } while ((bndv = bndv->next) != bv->vmesh->boundstart); /* Create the bottom face if it should be built, reusing previous face_bmverts allocation. */ if (build_center_face) { BLI_array_staticdeclare(bmedges, BM_DEFAULT_NGON_STACK_SIZE); BLI_array_staticdeclare(bmfaces, BM_DEFAULT_NGON_STACK_SIZE); /* Add all of the corner vertices to this face. */ for (i = 0; i < n_bndv; i++) { /* Add verts from each cutoff face. */ face_bmverts[i] = mesh_vert(bv->vmesh, i, 1, 0)->v; } /* BLI_array_append(bmfaces, repface); */ bev_create_ngon(bm, face_bmverts, n_bndv, bmfaces, NULL, bmedges, bp->mat_nr, true); BLI_array_free(bmedges); BLI_array_free(bmfaces); } } static BMFace *bevel_build_poly(BevelParams *bp, BMesh *bm, BevVert *bv) { BMFace *f, *repface; int n, k; VMesh *vm = bv->vmesh; BoundVert *bndv; BMEdge *repface_e1, *repface_e2, *frep_e; BMVert **bmverts = NULL; BMEdge **bmedges = NULL; BMFace **bmfaces = NULL; BLI_array_staticdeclare(bmverts, BM_DEFAULT_NGON_STACK_SIZE); BLI_array_staticdeclare(bmedges, BM_DEFAULT_NGON_STACK_SIZE); BLI_array_staticdeclare(bmfaces, BM_DEFAULT_NGON_STACK_SIZE); if (bv->any_seam) { repface = frep_for_center_poly(bp, bv); get_incident_edges(repface, bv->v, &repface_e1, &repface_e2); } else { repface = NULL; repface_e1 = repface_e2 = NULL; } bndv = vm->boundstart; n = 0; do { /* Accumulate vertices for vertex ngon. */ /* Also accumulate faces in which uv interpolation is to happen for each. */ BLI_array_append(bmverts, bndv->nv.v); if (repface) { BLI_array_append(bmfaces, repface); frep_e = find_closer_edge(bndv->nv.v->co, repface_e1, repface_e2); BLI_array_append(bmedges, n > 0 ? frep_e : NULL); } else { BLI_array_append(bmfaces, boundvert_rep_face(bndv, NULL)); BLI_array_append(bmedges, NULL); } n++; if (bndv->ebev && bndv->ebev->seg > 1) { for (k = 1; k < bndv->ebev->seg; k++) { BLI_array_append(bmverts, mesh_vert(vm, bndv->index, 0, k)->v); if (repface) { BLI_array_append(bmfaces, repface); frep_e = find_closer_edge( mesh_vert(vm, bndv->index, 0, k)->v->co, repface_e1, repface_e2); BLI_array_append(bmedges, k < bndv->ebev->seg / 2 ? NULL : frep_e); } else { BLI_array_append(bmfaces, boundvert_rep_face(bndv, NULL)); BLI_array_append(bmedges, NULL); } n++; } } } while ((bndv = bndv->next) != vm->boundstart); if (n > 2) { f = bev_create_ngon(bm, bmverts, n, bmfaces, repface, bmedges, bp->mat_nr, true); record_face_kind(bp, f, F_VERT); } else { f = NULL; } BLI_array_free(bmverts); BLI_array_free(bmedges); BLI_array_free(bmfaces); return f; } static void bevel_build_trifan(BevelParams *bp, BMesh *bm, BevVert *bv) { BMFace *f; BLI_assert(next_bev(bv, NULL)->seg == 1 || bv->selcount == 1); f = bevel_build_poly(bp, bm, bv); if (f) { /* We have a polygon which we know starts at the previous vertex, make it into a fan. */ BMLoop *l_fan = BM_FACE_FIRST_LOOP(f)->prev; BMVert *v_fan = l_fan->v; while (f->len > 3) { BMLoop *l_new; BMFace *f_new; BLI_assert(v_fan == l_fan->v); f_new = BM_face_split(bm, f, l_fan, l_fan->next->next, &l_new, NULL, false); flag_out_edge(bm, l_new->e); if (f_new->len > f->len) { f = f_new; if (l_new->v == v_fan) { l_fan = l_new; } else if (l_new->next->v == v_fan) { l_fan = l_new->next; } else if (l_new->prev->v == v_fan) { l_fan = l_new->prev; } else { BLI_assert(0); } } else { if (l_fan->v == v_fan) { /* l_fan = l_fan. */ } else if (l_fan->next->v == v_fan) { l_fan = l_fan->next; } else if (l_fan->prev->v == v_fan) { l_fan = l_fan->prev; } else { BLI_assert(0); } } record_face_kind(bp, f_new, F_VERT); } } } /* Special case: vertex bevel with only two boundary verts. * Want to make a curved edge if seg > 0. * If there are no faces in the original mesh at the original vertex, * there will be no rebuilt face to make the edge between the boundary verts, * we have to make it here. */ static void bevel_vert_two_edges(BevelParams *bp, BMesh *bm, BevVert *bv) { VMesh *vm = bv->vmesh; BMVert *v1, *v2; BMEdge *e_eg, *bme; Profile *pro; float co[3]; BoundVert *bndv; int ns, k; BLI_assert(vm->count == 2 && bp->affect_type == BEVEL_AFFECT_VERTICES); v1 = mesh_vert(vm, 0, 0, 0)->v; v2 = mesh_vert(vm, 1, 0, 0)->v; ns = vm->seg; if (ns > 1) { /* Set up profile parameters. */ bndv = vm->boundstart; pro = &bndv->profile; pro->super_r = bp->pro_super_r; copy_v3_v3(pro->start, v1->co); copy_v3_v3(pro->end, v2->co); copy_v3_v3(pro->middle, bv->v->co); /* Don't use projection. */ zero_v3(pro->plane_co); zero_v3(pro->plane_no); zero_v3(pro->proj_dir); for (k = 1; k < ns; k++) { get_profile_point(bp, pro, k, ns, co); copy_v3_v3(mesh_vert(vm, 0, 0, k)->co, co); create_mesh_bmvert(bm, vm, 0, 0, k, bv->v); } copy_v3_v3(mesh_vert(vm, 0, 0, ns)->co, v2->co); for (k = 1; k < ns; k++) { copy_mesh_vert(vm, 1, 0, ns - k, 0, 0, k); } } if (BM_vert_face_check(bv->v) == false) { e_eg = bv->edges[0].e; BLI_assert(e_eg != NULL); for (k = 0; k < ns; k++) { v1 = mesh_vert(vm, 0, 0, k)->v; v2 = mesh_vert(vm, 0, 0, k + 1)->v; BLI_assert(v1 != NULL && v2 != NULL); bme = BM_edge_create(bm, v1, v2, e_eg, BM_CREATE_NO_DOUBLE); if (bme) { flag_out_edge(bm, bme); } } } } /* Given that the boundary is built, now make the actual BMVerts * for the boundary and the interior of the vertex mesh. */ static void build_vmesh(BevelParams *bp, BMesh *bm, BevVert *bv) { VMesh *vm = bv->vmesh; BoundVert *bndv, *weld1, *weld2, *vpipe; int n, ns, ns2, i, k, weld; float *v_weld1, *v_weld2, co[3]; n = vm->count; ns = vm->seg; ns2 = ns / 2; vm->mesh = (NewVert *)BLI_memarena_alloc(bp->mem_arena, (size_t)(n * (ns2 + 1) * (ns + 1)) * sizeof(NewVert)); /* Special case: just two beveled edges welded together. */ weld = (bv->selcount == 2) && (vm->count == 2); weld1 = weld2 = NULL; /* Will hold two BoundVerts involved in weld. */ /* Make (i, 0, 0) mesh verts for all i boundverts. */ bndv = vm->boundstart; do { i = bndv->index; copy_v3_v3(mesh_vert(vm, i, 0, 0)->co, bndv->nv.co); /* Mesh NewVert to boundary NewVert. */ create_mesh_bmvert(bm, vm, i, 0, 0, bv->v); /* Create BMVert for that NewVert. */ bndv->nv.v = mesh_vert(vm, i, 0, 0)->v; /* Use the BMVert for the BoundVert's NewVert. */ /* Find boundverts and move profile planes if this is a weld case. */ if (weld && bndv->ebev) { if (!weld1) { weld1 = bndv; } else { /* Get the last of the two BoundVerts. */ weld2 = bndv; set_profile_params(bp, bv, weld1); set_profile_params(bp, bv, weld2); move_weld_profile_planes(bv, weld1, weld2); } } } while ((bndv = bndv->next) != vm->boundstart); /* It's simpler to calculate all profiles only once at a single moment, so keep just a single * profile calculation here, the last point before actual mesh verts are created. */ calculate_vm_profiles(bp, bv, vm); /* Create new vertices and place them based on the profiles. */ /* Copy other ends to (i, 0, ns) for all i, and fill in profiles for edges. */ bndv = vm->boundstart; do { i = bndv->index; /* bndv's last vert along the boundary arc is the first of the next BoundVert's arc. */ copy_mesh_vert(vm, i, 0, ns, bndv->next->index, 0, 0); if (vm->mesh_kind != M_ADJ) { for (k = 1; k < ns; k++) { if (bndv->ebev) { get_profile_point(bp, &bndv->profile, k, ns, co); copy_v3_v3(mesh_vert(vm, i, 0, k)->co, co); if (!weld) { /* This is done later with (possibly) better positions for the weld case. */ create_mesh_bmvert(bm, vm, i, 0, k, bv->v); } } else if (n == 2 && !bndv->ebev) { /* case of one edge beveled and this is the v without ebev */ /* want to copy the verts from other v, in reverse order */ copy_mesh_vert(bv->vmesh, i, 0, k, 1 - i, 0, ns - k); } } } } while ((bndv = bndv->next) != vm->boundstart); /* Build the profile for the weld case (just a connection between the two boundverts). */ if (weld) { bv->vmesh->mesh_kind = M_NONE; for (k = 1; k < ns; k++) { v_weld1 = mesh_vert(bv->vmesh, weld1->index, 0, k)->co; v_weld2 = mesh_vert(bv->vmesh, weld2->index, 0, ns - k)->co; if (bp->profile_type == BEVEL_PROFILE_CUSTOM) { /* Don't bother with special case profile check from below. */ mid_v3_v3v3(co, v_weld1, v_weld2); } else { /* Use the point from the other profile if one is in a special case. */ if (weld1->profile.super_r == PRO_LINE_R && weld2->profile.super_r != PRO_LINE_R) { copy_v3_v3(co, v_weld2); } else if (weld2->profile.super_r == PRO_LINE_R && weld1->profile.super_r != PRO_LINE_R) { copy_v3_v3(co, v_weld1); } else { /* In case the profiles aren't snapped to the same plane, use their midpoint. */ mid_v3_v3v3(co, v_weld1, v_weld2); } } copy_v3_v3(mesh_vert(bv->vmesh, weld1->index, 0, k)->co, co); create_mesh_bmvert(bm, bv->vmesh, weld1->index, 0, k, bv->v); } for (k = 1; k < ns; k++) { copy_mesh_vert(bv->vmesh, weld2->index, 0, ns - k, weld1->index, 0, k); } } /* Make sure the pipe case ADJ mesh is used for both the "Grid Fill" (ADJ) and cutoff options. */ vpipe = NULL; if ((vm->count == 3 || vm->count == 4) && bp->seg > 1) { /* Result is passed to bevel_build_rings to avoid overhead. */ vpipe = pipe_test(bv); if (vpipe) { vm->mesh_kind = M_ADJ; } } switch (vm->mesh_kind) { case M_NONE: if (n == 2 && bp->affect_type == BEVEL_AFFECT_VERTICES) { bevel_vert_two_edges(bp, bm, bv); } break; case M_POLY: bevel_build_poly(bp, bm, bv); break; case M_ADJ: bevel_build_rings(bp, bm, bv, vpipe); break; case M_TRI_FAN: bevel_build_trifan(bp, bm, bv); break; case M_CUTOFF: bevel_build_cutoff(bp, bm, bv); } } /* Return the angle between the two faces adjacent to e. * If there are not two, return 0. */ static float edge_face_angle(EdgeHalf *e) { if (e->fprev && e->fnext) { /* Angle between faces is supplement of angle between face normals. */ return (float)M_PI - angle_normalized_v3v3(e->fprev->no, e->fnext->no); } return 0.0f; } /* Take care, this flag isn't cleared before use, it just so happens that its not set. */ #define BM_BEVEL_EDGE_TAG_ENABLE(bme) BM_ELEM_API_FLAG_ENABLE((bme), _FLAG_OVERLAP) #define BM_BEVEL_EDGE_TAG_DISABLE(bme) BM_ELEM_API_FLAG_DISABLE((bme), _FLAG_OVERLAP) #define BM_BEVEL_EDGE_TAG_TEST(bme) BM_ELEM_API_FLAG_TEST((bme), _FLAG_OVERLAP) /** * Try to extend the bv->edges[] array beyond i by finding more successor edges. * This is a possibly exponential-time search, but it is only exponential in the number * of "internal faces" at a vertex -- i.e., faces that bridge between the edges that naturally * form a manifold cap around bv. It is rare to have more than one of these, so unlikely * that the exponential time case will be hit in practice. * Returns the new index i' where bv->edges[i'] ends the best path found. * The path will have the tags of all of its edges set. */ static int bevel_edge_order_extend(BMesh *bm, BevVert *bv, int i) { BMEdge *bme, *bme2, *nextbme; BMLoop *l; BMIter iter; int j, tryj, bestj, nsucs, sucindex, k; BMEdge **sucs = NULL; BMEdge **save_path = NULL; BLI_array_staticdeclare(sucs, 4); /* Likely very few faces attached to same edge. */ BLI_array_staticdeclare(save_path, BM_DEFAULT_NGON_STACK_SIZE); bme = bv->edges[i].e; /* Fill sucs with all unmarked edges of bmesh. */ BM_ITER_ELEM (l, &iter, bme, BM_LOOPS_OF_EDGE) { bme2 = (l->v == bv->v) ? l->prev->e : l->next->e; if (!BM_BEVEL_EDGE_TAG_TEST(bme2)) { BLI_array_append(sucs, bme2); } } nsucs = BLI_array_len(sucs); bestj = j = i; for (sucindex = 0; sucindex < nsucs; sucindex++) { nextbme = sucs[sucindex]; BLI_assert(nextbme != NULL); BLI_assert(!BM_BEVEL_EDGE_TAG_TEST(nextbme)); BLI_assert(j + 1 < bv->edgecount); bv->edges[j + 1].e = nextbme; BM_BEVEL_EDGE_TAG_ENABLE(nextbme); tryj = bevel_edge_order_extend(bm, bv, j + 1); if (tryj > bestj || (tryj == bestj && edges_face_connected_at_vert(bv->edges[tryj].e, bv->edges[0].e))) { bestj = tryj; BLI_array_clear(save_path); for (k = j + 1; k <= bestj; k++) { BLI_array_append(save_path, bv->edges[k].e); } } /* Now reset to path only-going-to-j state. */ for (k = j + 1; k <= tryj; k++) { BM_BEVEL_EDGE_TAG_DISABLE(bv->edges[k].e); bv->edges[k].e = NULL; } } /* At this point we should be back at invariant on entrance: path up to j. */ if (bestj > j) { /* Save_path should have from j + 1 to bestj inclusive. * Edges to add to edges[] before returning. */ for (k = j + 1; k <= bestj; k++) { BLI_assert(save_path[k - (j + 1)] != NULL); bv->edges[k].e = save_path[k - (j + 1)]; BM_BEVEL_EDGE_TAG_ENABLE(bv->edges[k].e); } } BLI_array_free(sucs); BLI_array_free(save_path); return bestj; } /* See if we have usual case for bevel edge order: * there is an ordering such that all the faces are between * successive edges and form a manifold "cap" at bv. * If this is the case, set bv->edges to such an order * and return true; else return unmark any partial path and return false. * Assume the first edge is already in bv->edges[0].e and it is tagged. */ #ifdef FASTER_FASTORDER /* The alternative older code is O(n^2) where n = # of edges incident to bv->v. * This implementation is O(n * m) where m = average number of faces attached to an edge incident * to bv->v, which is almost certainly a small constant except in very strange cases. * But this code produces different choices of ordering than the legacy system, * leading to differences in vertex orders etc. in user models, * so for now will continue to use the legacy code. */ static bool fast_bevel_edge_order(BevVert *bv) { int j, k, nsucs; BMEdge *bme, *bme2, *bmenext; BMIter iter; BMLoop *l; for (j = 1; j < bv->edgecount; j++) { bme = bv->edges[j - 1].e; bmenext = NULL; nsucs = 0; BM_ITER_ELEM (l, &iter, bme, BM_LOOPS_OF_EDGE) { bme2 = (l->v == bv->v) ? l->prev->e : l->next->e; if (!BM_BEVEL_EDGE_TAG_TEST(bme2)) { nsucs++; if (bmenext == NULL) { bmenext = bme2; } } } if (nsucs == 0 || (nsucs == 2 && j != 1) || nsucs > 2 || (j == bv->edgecount - 1 && !edges_face_connected_at_vert(bmenext, bv->edges[0].e))) { for (k = 1; k < j; k++) { BM_BEVEL_EDGE_TAG_DISABLE(bv->edges[k].e); bv->edges[k].e = NULL; } return false; } bv->edges[j].e = bmenext; BM_BEVEL_EDGE_TAG_ENABLE(bmenext); } return true; } #else static bool fast_bevel_edge_order(BevVert *bv) { BMEdge *bme, *bme2, *first_suc; BMIter iter, iter2; BMFace *f; EdgeHalf *e; int i, k, ntot, num_shared_face; ntot = bv->edgecount; /* Add edges to bv->edges in order that keeps adjacent edges sharing * a unique face, if possible. */ e = &bv->edges[0]; bme = e->e; if (!bme->l) { return false; } for (i = 1; i < ntot; i++) { /* Find an unflagged edge bme2 that shares a face f with previous bme. */ num_shared_face = 0; first_suc = NULL; /* Keep track of first successor to match legacy behavior. */ BM_ITER_ELEM (bme2, &iter, bv->v, BM_EDGES_OF_VERT) { if (BM_BEVEL_EDGE_TAG_TEST(bme2)) { continue; } BM_ITER_ELEM (f, &iter2, bme2, BM_FACES_OF_EDGE) { if (BM_face_edge_share_loop(f, bme)) { num_shared_face++; if (first_suc == NULL) { first_suc = bme2; } } } if (num_shared_face >= 3) { break; } } if (num_shared_face == 1 || (i == 1 && num_shared_face == 2)) { e = &bv->edges[i]; e->e = bme = first_suc; BM_BEVEL_EDGE_TAG_ENABLE(bme); } else { for (k = 1; k < i; k++) { BM_BEVEL_EDGE_TAG_DISABLE(bv->edges[k].e); bv->edges[k].e = NULL; } return false; } } return true; } #endif /* Fill in bv->edges with a good ordering of non-wire edges around bv->v. * Use only edges where BM_BEVEL_EDGE_TAG is disabled so far (if edge beveling, others are wire). * first_bme is a good edge to start with. */ static void find_bevel_edge_order(BMesh *bm, BevVert *bv, BMEdge *first_bme) { BMEdge *bme, *bme2; BMIter iter; BMFace *f, *bestf; EdgeHalf *e; EdgeHalf *e2; BMLoop *l; int i, ntot; ntot = bv->edgecount; i = 0; for (;;) { BLI_assert(first_bme != NULL); bv->edges[i].e = first_bme; BM_BEVEL_EDGE_TAG_ENABLE(first_bme); if (i == 0 && fast_bevel_edge_order(bv)) { break; } i = bevel_edge_order_extend(bm, bv, i); i++; if (i >= bv->edgecount) { break; } /* Not done yet: find a new first_bme. */ first_bme = NULL; BM_ITER_ELEM (bme, &iter, bv->v, BM_EDGES_OF_VERT) { if (BM_BEVEL_EDGE_TAG_TEST(bme)) { continue; } if (!first_bme) { first_bme = bme; } if (BM_edge_face_count(bme) == 1) { first_bme = bme; break; } } } /* Now fill in the faces. */ for (i = 0; i < ntot; i++) { e = &bv->edges[i]; e2 = (i == bv->edgecount - 1) ? &bv->edges[0] : &bv->edges[i + 1]; bme = e->e; bme2 = e2->e; BLI_assert(bme != NULL); if (e->fnext != NULL || e2->fprev != NULL) { continue; } /* Which faces have successive loops that are for bme and bme2? * There could be more than one. E.g., in manifold ntot==2 case. * Prefer one that has loop in same direction as e. */ bestf = NULL; BM_ITER_ELEM (l, &iter, bme, BM_LOOPS_OF_EDGE) { f = l->f; if ((l->prev->e == bme2 || l->next->e == bme2)) { if (!bestf || l->v == bv->v) { bestf = f; } } if (bestf) { e->fnext = e2->fprev = bestf; } } } } /* Construction around the vertex. */ static BevVert *bevel_vert_construct(BMesh *bm, BevelParams *bp, BMVert *v) { BMEdge *bme; BevVert *bv; BMEdge *first_bme; BMVert *v1, *v2; BMIter iter; EdgeHalf *e; float weight, z; float vert_axis[3] = {0, 0, 0}; int i, ccw_test_sum; int nsel = 0; int tot_edges = 0; int tot_wire = 0; /* Gather input selected edges. * Only bevel selected edges that have exactly two incident faces. * Want edges to be ordered so that they share faces. * There may be one or more chains of shared faces broken by * gaps where there are no faces. * Want to ignore wire edges completely for edge beveling. * TODO: make following work when more than one gap. */ first_bme = NULL; BM_ITER_ELEM (bme, &iter, v, BM_EDGES_OF_VERT) { int face_count = BM_edge_face_count(bme); BM_BEVEL_EDGE_TAG_DISABLE(bme); if (BM_elem_flag_test(bme, BM_ELEM_TAG) && bp->affect_type != BEVEL_AFFECT_VERTICES) { BLI_assert(face_count == 2); nsel++; if (!first_bme) { first_bme = bme; } } if (face_count == 1) { /* Good to start face chain from this edge. */ first_bme = bme; } if (face_count > 0 || bp->affect_type == BEVEL_AFFECT_VERTICES) { tot_edges++; } if (BM_edge_is_wire(bme)) { tot_wire++; /* If edge beveling, exclude wire edges from edges array. * Mark this edge as "chosen" so loop below won't choose it. */ if (bp->affect_type != BEVEL_AFFECT_VERTICES) { BM_BEVEL_EDGE_TAG_ENABLE(bme); } } } if (!first_bme) { first_bme = v->e; } if ((nsel == 0 && bp->affect_type != BEVEL_AFFECT_VERTICES) || (tot_edges < 2 && bp->affect_type == BEVEL_AFFECT_VERTICES)) { /* Signal this vert isn't being beveled. */ BM_elem_flag_disable(v, BM_ELEM_TAG); return NULL; } bv = (BevVert *)BLI_memarena_alloc(bp->mem_arena, (sizeof(BevVert))); bv->v = v; bv->edgecount = tot_edges; bv->selcount = nsel; bv->wirecount = tot_wire; bv->offset = bp->offset; bv->edges = (EdgeHalf *)BLI_memarena_alloc(bp->mem_arena, tot_edges * sizeof(EdgeHalf)); if (tot_wire) { bv->wire_edges = (BMEdge **)BLI_memarena_alloc(bp->mem_arena, tot_wire * sizeof(BMEdge *)); } else { bv->wire_edges = NULL; } bv->vmesh = (VMesh *)BLI_memarena_alloc(bp->mem_arena, sizeof(VMesh)); bv->vmesh->seg = bp->seg; BLI_ghash_insert(bp->vert_hash, v, bv); find_bevel_edge_order(bm, bv, first_bme); /* Fill in other attributes of EdgeHalfs. */ for (i = 0; i < tot_edges; i++) { e = &bv->edges[i]; bme = e->e; if (BM_elem_flag_test(bme, BM_ELEM_TAG) && bp->affect_type != BEVEL_AFFECT_VERTICES) { e->is_bev = true; e->seg = bp->seg; } else { e->is_bev = false; e->seg = 0; } e->is_rev = (bme->v2 == v); e->leftv = e->rightv = NULL; e->profile_index = 0; } /* Now done with tag flag. */ BM_ITER_ELEM (bme, &iter, v, BM_EDGES_OF_VERT) { BM_BEVEL_EDGE_TAG_DISABLE(bme); } /* If edge array doesn't go CCW around vertex from average normal side, * reverse the array, being careful to reverse face pointers too. */ if (tot_edges > 1) { ccw_test_sum = 0; for (i = 0; i < tot_edges; i++) { ccw_test_sum += bev_ccw_test( bv->edges[i].e, bv->edges[(i + 1) % tot_edges].e, bv->edges[i].fnext); } if (ccw_test_sum < 0) { for (i = 0; i <= (tot_edges / 2) - 1; i++) { SWAP(EdgeHalf, bv->edges[i], bv->edges[tot_edges - i - 1]); SWAP(BMFace *, bv->edges[i].fprev, bv->edges[i].fnext); SWAP(BMFace *, bv->edges[tot_edges - i - 1].fprev, bv->edges[tot_edges - i - 1].fnext); } if (tot_edges % 2 == 1) { i = tot_edges / 2; SWAP(BMFace *, bv->edges[i].fprev, bv->edges[i].fnext); } } } if (bp->affect_type == BEVEL_AFFECT_VERTICES) { /* Modify the offset by the vertex group or bevel weight if they are specified. */ if (bp->dvert != NULL && bp->vertex_group != -1) { weight = BKE_defvert_find_weight(bp->dvert + BM_elem_index_get(v), bp->vertex_group); bv->offset *= weight; } else if (bp->use_weights) { weight = BM_elem_float_data_get(&bm->vdata, v, CD_BWEIGHT); bv->offset *= weight; } /* Find center axis. Note: Don't use vert normal, can give unwanted results. */ if (ELEM(bp->offset_type, BEVEL_AMT_WIDTH, BEVEL_AMT_DEPTH)) { float edge_dir[3]; for (i = 0, e = bv->edges; i < tot_edges; i++, e++) { v2 = BM_edge_other_vert(e->e, bv->v); sub_v3_v3v3(edge_dir, bv->v->co, v2->co); normalize_v3(edge_dir); add_v3_v3v3(vert_axis, vert_axis, edge_dir); } } } /* Set offsets for each beveled edge. */ for (i = 0, e = bv->edges; i < tot_edges; i++, e++) { e->next = &bv->edges[(i + 1) % tot_edges]; e->prev = &bv->edges[(i + tot_edges - 1) % tot_edges]; if (e->is_bev) { /* Convert distance as specified by user into offsets along * faces on the left side and right sides of this edgehalf. * Except for percent method, offset will be same on each side. */ switch (bp->offset_type) { case BEVEL_AMT_OFFSET: e->offset_l_spec = bp->offset; break; case BEVEL_AMT_WIDTH: z = fabsf(2.0f * sinf(edge_face_angle(e) / 2.0f)); if (z < BEVEL_EPSILON) { e->offset_l_spec = 0.01f * bp->offset; /* Undefined behavior, so tiny bevel. */ } else { e->offset_l_spec = bp->offset / z; } break; case BEVEL_AMT_DEPTH: z = fabsf(cosf(edge_face_angle(e) / 2.0f)); if (z < BEVEL_EPSILON) { e->offset_l_spec = 0.01f * bp->offset; /* Undefined behavior, so tiny bevel. */ } else { e->offset_l_spec = bp->offset / z; } break; case BEVEL_AMT_PERCENT: /* Offset needs to meet adjacent edges at percentage of their lengths. */ v1 = BM_edge_other_vert(e->prev->e, v); v2 = BM_edge_other_vert(e->e, v); z = sinf(angle_v3v3v3(v1->co, v->co, v2->co)); e->offset_l_spec = BM_edge_calc_length(e->prev->e) * bp->offset * z / 100.0f; v1 = BM_edge_other_vert(e->e, v); v2 = BM_edge_other_vert(e->next->e, v); z = sinf(angle_v3v3v3(v1->co, v->co, v2->co)); e->offset_r_spec = BM_edge_calc_length(e->next->e) * bp->offset * z / 100.0f; break; case BEVEL_AMT_ABSOLUTE: /* Like Percent, but the amount gives the absolute distance along adjacent edges. */ v1 = BM_edge_other_vert(e->prev->e, v); v2 = BM_edge_other_vert(e->e, v); z = sinf(angle_v3v3v3(v1->co, v->co, v2->co)); e->offset_l_spec = bp->offset * z; v1 = BM_edge_other_vert(e->e, v); v2 = BM_edge_other_vert(e->next->e, v); z = sinf(angle_v3v3v3(v1->co, v->co, v2->co)); e->offset_r_spec = bp->offset * z; break; default: BLI_assert(!"bad bevel offset kind"); e->offset_l_spec = bp->offset; break; } if (bp->offset_type != BEVEL_AMT_PERCENT && bp->offset_type != BEVEL_AMT_ABSOLUTE) { e->offset_r_spec = e->offset_l_spec; } if (bp->use_weights) { weight = BM_elem_float_data_get(&bm->edata, e->e, CD_BWEIGHT); e->offset_l_spec *= weight; e->offset_r_spec *= weight; } } else if (bp->affect_type == BEVEL_AFFECT_VERTICES) { /* Weight has already been applied to bv->offset, if present. * Transfer to e->offset_[lr]_spec according to offset_type. */ float edge_dir[3]; switch (bp->offset_type) { case BEVEL_AMT_OFFSET: { e->offset_l_spec = bv->offset; break; } case BEVEL_AMT_WIDTH: { v2 = BM_edge_other_vert(e->e, bv->v); sub_v3_v3v3(edge_dir, bv->v->co, v2->co); z = fabsf(2.0f * sinf(angle_v3v3(vert_axis, edge_dir))); if (z < BEVEL_EPSILON) { e->offset_l_spec = 0.01f * bp->offset; /* Undefined behavior, so tiny bevel. */ } else { e->offset_l_spec = bp->offset / z; } break; } case BEVEL_AMT_DEPTH: { v2 = BM_edge_other_vert(e->e, bv->v); sub_v3_v3v3(edge_dir, bv->v->co, v2->co); z = fabsf(cosf(angle_v3v3(vert_axis, edge_dir))); if (z < BEVEL_EPSILON) { e->offset_l_spec = 0.01f * bp->offset; /* Undefined behavior, so tiny bevel. */ } else { e->offset_l_spec = bp->offset / z; } break; } case BEVEL_AMT_PERCENT: { e->offset_l_spec = BM_edge_calc_length(e->e) * bv->offset / 100.0f; break; } case BEVEL_AMT_ABSOLUTE: { e->offset_l_spec = bv->offset; break; } } e->offset_r_spec = e->offset_l_spec; } else { e->offset_l_spec = e->offset_r_spec = 0.0f; } e->offset_l = e->offset_l_spec; e->offset_r = e->offset_r_spec; if (e->fprev && e->fnext) { e->is_seam = !contig_ldata_across_edge(bm, e->e, e->fprev, e->fnext); } else { e->is_seam = true; } } /* Collect wire edges if we found any earlier. */ if (tot_wire) { i = 0; BM_ITER_ELEM (bme, &iter, v, BM_EDGES_OF_VERT) { if (BM_edge_is_wire(bme)) { BLI_assert(i < bv->wirecount); bv->wire_edges[i++] = bme; } } BLI_assert(i == bv->wirecount); } return bv; } /* Face f has at least one beveled vertex. Rebuild f. */ static bool bev_rebuild_polygon(BMesh *bm, BevelParams *bp, BMFace *f) { BMIter liter, eiter, fiter; BMLoop *l, *lprev; BevVert *bv; BoundVert *v, *vstart, *vend; EdgeHalf *e, *eprev; VMesh *vm; int i, k, n, kstart, kend; bool do_rebuild = false; bool go_ccw, corner3special, keep, on_profile_start; BMVert *bmv; BMEdge *bme, *bme_new, *bme_prev; BMFace *f_new, *f_other; BMVert **vv = NULL; BMVert **vv_fix = NULL; BMEdge **ee = NULL; BLI_array_staticdeclare(vv, BM_DEFAULT_NGON_STACK_SIZE); BLI_array_staticdeclare(vv_fix, BM_DEFAULT_NGON_STACK_SIZE); BLI_array_staticdeclare(ee, BM_DEFAULT_NGON_STACK_SIZE); BM_ITER_ELEM (l, &liter, f, BM_LOOPS_OF_FACE) { if (BM_elem_flag_test(l->v, BM_ELEM_TAG)) { lprev = l->prev; bv = find_bevvert(bp, l->v); vm = bv->vmesh; e = find_edge_half(bv, l->e); BLI_assert(e != NULL); bme = e->e; eprev = find_edge_half(bv, lprev->e); BLI_assert(eprev != NULL); /* Which direction around our vertex do we travel to match orientation of f? */ if (e->prev == eprev) { if (eprev->prev == e) { /* Valence 2 vertex: use f is one of e->fnext or e->fprev to break tie. */ go_ccw = (e->fnext != f); } else { go_ccw = true; /* Going ccw around bv to trace this corner. */ } } else if (eprev->prev == e) { go_ccw = false; /* Going cw around bv to trace this corner. */ } else { /* Edges in face are non-contiguous in our ordering around bv. * Which way should we go when going from eprev to e? */ if (count_ccw_edges_between(eprev, e) < count_ccw_edges_between(e, eprev)) { /* Go counterclockewise from eprev to e. */ go_ccw = true; } else { /* Go clockwise from eprev to e. */ go_ccw = false; } } on_profile_start = false; if (go_ccw) { vstart = eprev->rightv; vend = e->leftv; if (e->profile_index > 0) { vstart = vstart->prev; on_profile_start = true; } } else { vstart = eprev->leftv; vend = e->rightv; if (eprev->profile_index > 0) { vstart = vstart->next; on_profile_start = true; } } BLI_assert(vstart != NULL && vend != NULL); v = vstart; if (!on_profile_start) { BLI_array_append(vv, v->nv.v); BLI_array_append(ee, bme); } while (v != vend) { /* Check for special case: multisegment 3rd face opposite a beveled edge with no vmesh. */ corner3special = (vm->mesh_kind == M_NONE && v->ebev != e && v->ebev != eprev); if (go_ccw) { i = v->index; if (on_profile_start) { kstart = e->profile_index; on_profile_start = false; } else { kstart = 1; } if (eprev->rightv == v && eprev->profile_index > 0) { kend = eprev->profile_index; } else { kend = vm->seg; } for (k = kstart; k <= kend; k++) { bmv = mesh_vert(vm, i, 0, k)->v; if (bmv) { BLI_array_append(vv, bmv); BLI_array_append(ee, bme); /* TODO: Maybe better edge here. */ if (corner3special && v->ebev && !v->ebev->is_seam && k != vm->seg) { BLI_array_append(vv_fix, bmv); } } } v = v->next; } else { /* Going cw. */ i = v->prev->index; if (on_profile_start) { kstart = eprev->profile_index; on_profile_start = false; } else { kstart = vm->seg - 1; } if (e->rightv == v->prev && e->profile_index > 0) { kend = e->profile_index; } else { kend = 0; } for (k = kstart; k >= kend; k--) { bmv = mesh_vert(vm, i, 0, k)->v; if (bmv) { BLI_array_append(vv, bmv); BLI_array_append(ee, bme); if (corner3special && v->ebev && !v->ebev->is_seam && k != 0) { BLI_array_append(vv_fix, bmv); } } } v = v->prev; } } do_rebuild = true; } else { BLI_array_append(vv, l->v); BLI_array_append(ee, l->e); } } if (do_rebuild) { n = BLI_array_len(vv); f_new = bev_create_ngon(bm, vv, n, NULL, f, NULL, -1, true); for (k = 0; k < BLI_array_len(vv_fix); k++) { bev_merge_uvs(bm, vv_fix[k]); } /* Copy attributes from old edges. */ BLI_assert(n == BLI_array_len(ee)); bme_prev = ee[n - 1]; for (k = 0; k < n; k++) { bme_new = BM_edge_exists(vv[k], vv[(k + 1) % n]); BLI_assert(ee[k] && bme_new); if (ee[k] != bme_new) { BM_elem_attrs_copy(bm, bm, ee[k], bme_new); /* Want to undo seam and smooth for corner segments * if those attrs aren't contiguous around face. */ if (k < n - 1 && ee[k] == ee[k + 1]) { if (BM_elem_flag_test(ee[k], BM_ELEM_SEAM) && !BM_elem_flag_test(bme_prev, BM_ELEM_SEAM)) { BM_elem_flag_disable(bme_new, BM_ELEM_SEAM); } /* Actually want "sharp" to be contiguous, so reverse the test. */ if (!BM_elem_flag_test(ee[k], BM_ELEM_SMOOTH) && BM_elem_flag_test(bme_prev, BM_ELEM_SMOOTH)) { BM_elem_flag_enable(bme_new, BM_ELEM_SMOOTH); } } else { bme_prev = ee[k]; } } } /* Don't select newly or return created boundary faces. */ if (f_new) { record_face_kind(bp, f_new, F_RECON); BM_elem_flag_disable(f_new, BM_ELEM_TAG); /* Also don't want new edges that aren't part of a new bevel face. */ BM_ITER_ELEM (bme, &eiter, f_new, BM_EDGES_OF_FACE) { keep = false; BM_ITER_ELEM (f_other, &fiter, bme, BM_FACES_OF_EDGE) { if (BM_elem_flag_test(f_other, BM_ELEM_TAG)) { keep = true; break; } } if (!keep) { disable_flag_out_edge(bm, bme); } } } } BLI_array_free(vv); BLI_array_free(vv_fix); BLI_array_free(ee); return do_rebuild; } /* All polygons touching v need rebuilding because beveling v has made new vertices. */ static void bevel_rebuild_existing_polygons(BMesh *bm, BevelParams *bp, BMVert *v) { void *faces_stack[BM_DEFAULT_ITER_STACK_SIZE]; int faces_len, f_index; BMFace **faces = BM_iter_as_arrayN( bm, BM_FACES_OF_VERT, v, &faces_len, faces_stack, BM_DEFAULT_ITER_STACK_SIZE); if (LIKELY(faces != NULL)) { for (f_index = 0; f_index < faces_len; f_index++) { BMFace *f = faces[f_index]; if (bev_rebuild_polygon(bm, bp, f)) { BM_face_kill(bm, f); } } if (faces != (BMFace **)faces_stack) { MEM_freeN(faces); } } } /* If there were any wire edges, they need to be reattached somewhere. */ static void bevel_reattach_wires(BMesh *bm, BevelParams *bp, BMVert *v) { BMEdge *e; BMVert *vclosest, *vother, *votherclosest; BevVert *bv, *bvother; BoundVert *bndv, *bndvother; float d, dclosest; int i; bv = find_bevvert(bp, v); if (!bv || bv->wirecount == 0 || !bv->vmesh) { return; } for (i = 0; i < bv->wirecount; i++) { e = bv->wire_edges[i]; /* Look for the new vertex closest to the other end of e. */ vclosest = NULL; dclosest = FLT_MAX; votherclosest = NULL; vother = BM_edge_other_vert(e, v); bvother = NULL; if (BM_elem_flag_test(vother, BM_ELEM_TAG)) { bvother = find_bevvert(bp, vother); if (!bvother || !bvother->vmesh) { return; /* Shouldn't happen. */ } } bndv = bv->vmesh->boundstart; do { if (bvother) { bndvother = bvother->vmesh->boundstart; do { d = len_squared_v3v3(bndvother->nv.co, bndv->nv.co); if (d < dclosest) { vclosest = bndv->nv.v; votherclosest = bndvother->nv.v; dclosest = d; } } while ((bndvother = bndvother->next) != bvother->vmesh->boundstart); } else { d = len_squared_v3v3(vother->co, bndv->nv.co); if (d < dclosest) { vclosest = bndv->nv.v; votherclosest = vother; dclosest = d; } } } while ((bndv = bndv->next) != bv->vmesh->boundstart); if (vclosest) { BM_edge_create(bm, vclosest, votherclosest, e, BM_CREATE_NO_DOUBLE); } } } static void bev_merge_end_uvs(BMesh *bm, BevVert *bv, EdgeHalf *e) { VMesh *vm = bv->vmesh; int i, k, nseg; nseg = e->seg; i = e->leftv->index; for (k = 1; k < nseg; k++) { bev_merge_uvs(bm, mesh_vert(vm, i, 0, k)->v); } } /* * Is this BevVert the special case of a weld (no vmesh) where there are * four edges total, two are beveled, and the other two are on opposite sides? */ static bool bevvert_is_weld_cross(BevVert *bv) { return (bv->edgecount == 4 && bv->selcount == 2 && ((bv->edges[0].is_bev && bv->edges[2].is_bev) || (bv->edges[1].is_bev && bv->edges[3].is_bev))); } /** * Copy edge attribute data across the non-beveled crossing edges of a cross weld. * * Situation looks like this: * * e->next * | * -------3------- * -------2------- * -------1------- e * -------0------ * | * e->prev * * where e is the EdgeHalf of one of the beveled edges, * e->next and e->prev are EdgeHalfs for the unbeveled edges of the cross * and their attributes are to be copied to the edges 01, 12, 23. * The vert i is mesh_vert(vm, vmindex, 0, i)->v. */ static void weld_cross_attrs_copy(BMesh *bm, BevVert *bv, VMesh *vm, int vmindex, EdgeHalf *e) { BMEdge *bme_prev, *bme_next, *bme; int i, nseg; bool disable_seam, enable_smooth; bme_prev = bme_next = NULL; for (i = 0; i < 4; i++) { if (&bv->edges[i] == e) { bme_prev = bv->edges[(i + 3) % 4].e; bme_next = bv->edges[(i + 1) % 4].e; break; } } BLI_assert(bme_prev && bme_next); /* Want seams and sharp edges to cross only if that way on both sides. */ disable_seam = BM_elem_flag_test(bme_prev, BM_ELEM_SEAM) != BM_elem_flag_test(bme_next, BM_ELEM_SEAM); enable_smooth = BM_elem_flag_test(bme_prev, BM_ELEM_SMOOTH) != BM_elem_flag_test(bme_next, BM_ELEM_SMOOTH); nseg = e->seg; for (i = 0; i < nseg; i++) { bme = BM_edge_exists(mesh_vert(vm, vmindex, 0, i)->v, mesh_vert(vm, vmindex, 0, i + 1)->v); BLI_assert(bme); BM_elem_attrs_copy(bm, bm, bme_prev, bme); if (disable_seam) { BM_elem_flag_disable(bme, BM_ELEM_SEAM); } if (enable_smooth) { BM_elem_flag_enable(bme, BM_ELEM_SMOOTH); } } } /** * Build the bevel polygons along the selected Edge. */ static void bevel_build_edge_polygons(BMesh *bm, BevelParams *bp, BMEdge *bme) { BevVert *bv1, *bv2; BMVert *bmv1, *bmv2, *bmv3, *bmv4; VMesh *vm1, *vm2; EdgeHalf *e1, *e2; BMEdge *bme1, *bme2, *center_bme; BMFace *f1, *f2, *f, *r_f, *f_choice; BMVert *verts[4]; BMFace *faces[4]; BMEdge *edges[4]; BMLoop *l; BMIter iter; int k, nseg, i1, i2, odd, mid; int mat_nr = bp->mat_nr; if (!BM_edge_is_manifold(bme)) { return; } bv1 = find_bevvert(bp, bme->v1); bv2 = find_bevvert(bp, bme->v2); BLI_assert(bv1 && bv2); e1 = find_edge_half(bv1, bme); e2 = find_edge_half(bv2, bme); BLI_assert(e1 && e2); /* * bme->v1 * / | \ * v1--|--v4 * | | | * | | | * v2--|--v3 * \ | / * bme->v2 */ nseg = e1->seg; BLI_assert(nseg > 0 && nseg == e2->seg); bmv1 = e1->leftv->nv.v; bmv4 = e1->rightv->nv.v; bmv2 = e2->rightv->nv.v; bmv3 = e2->leftv->nv.v; BLI_assert(bmv1 && bmv2 && bmv3 && bmv4); f1 = e1->fprev; f2 = e1->fnext; faces[0] = faces[1] = f1; faces[2] = faces[3] = f2; i1 = e1->leftv->index; i2 = e2->leftv->index; vm1 = bv1->vmesh; vm2 = bv2->vmesh; verts[0] = bmv1; verts[1] = bmv2; odd = nseg % 2; mid = nseg / 2; center_bme = NULL; for (k = 1; k <= nseg; k++) { verts[3] = mesh_vert(vm1, i1, 0, k)->v; verts[2] = mesh_vert(vm2, i2, 0, nseg - k)->v; if (odd && k == mid + 1) { BMFace *fchoices[2] = {f1, f2}; f_choice = choose_rep_face(bp, fchoices, 2); if (e1->is_seam) { /* Straddles a seam: choose to interpolate in f_choice and snap the loops whose verts * are in the non-chosen face to bme for interpolation purposes. */ if (f_choice == f1) { edges[0] = edges[1] = NULL; edges[2] = edges[3] = bme; } else { edges[0] = edges[1] = bme; edges[2] = edges[3] = NULL; } r_f = bev_create_ngon(bm, verts, 4, NULL, f_choice, edges, mat_nr, true); } else { /* Straddles but not a seam: interpolate left half in f1, right half in f2. */ r_f = bev_create_ngon(bm, verts, 4, faces, f_choice, NULL, mat_nr, true); } } else if (!odd && k == mid) { /* Left poly that touches an even center line on right. */ edges[0] = edges[1] = NULL; edges[2] = edges[3] = bme; r_f = bev_create_ngon(bm, verts, 4, NULL, f1, edges, mat_nr, true); center_bme = BM_edge_exists(verts[2], verts[3]); BLI_assert(center_bme != NULL); } else if (!odd && k == mid + 1) { /* Right poly that touches an even center line on left. */ edges[0] = edges[1] = bme; edges[2] = edges[3] = NULL; r_f = bev_create_ngon(bm, verts, 4, NULL, f2, edges, mat_nr, true); } else { /* Doesn't cross or touch the center line, so interpolate in appropriate f1 or f2. */ f = (k <= mid) ? f1 : f2; r_f = bev_create_ngon(bm, verts, 4, NULL, f, NULL, mat_nr, true); } record_face_kind(bp, r_f, F_EDGE); /* Tag the long edges: those out of verts[0] and verts[2]. */ BM_ITER_ELEM (l, &iter, r_f, BM_LOOPS_OF_FACE) { if (l->v == verts[0] || l->v == verts[2]) { BM_elem_flag_enable(l, BM_ELEM_LONG_TAG); } } verts[0] = verts[3]; verts[1] = verts[2]; } if (!odd) { if (!e1->is_seam) { bev_merge_edge_uvs(bm, center_bme, mesh_vert(vm1, i1, 0, mid)->v); } if (!e2->is_seam) { bev_merge_edge_uvs(bm, center_bme, mesh_vert(vm2, i2, 0, mid)->v); } } /* Fix UVs along end edge joints. A nop unless other side built already. */ /* TODO: If some seam, may want to do selective merge. */ if (!bv1->any_seam && bv1->vmesh->mesh_kind == M_NONE) { bev_merge_end_uvs(bm, bv1, e1); } if (!bv2->any_seam && bv2->vmesh->mesh_kind == M_NONE) { bev_merge_end_uvs(bm, bv2, e2); } /* Copy edge data to first and last edge. */ bme1 = BM_edge_exists(bmv1, bmv2); bme2 = BM_edge_exists(bmv3, bmv4); BLI_assert(bme1 && bme2); BM_elem_attrs_copy(bm, bm, bme, bme1); BM_elem_attrs_copy(bm, bm, bme, bme2); /* If either end is a "weld cross", want continuity of edge attributes across end edge(s). */ if (bevvert_is_weld_cross(bv1)) { weld_cross_attrs_copy(bm, bv1, vm1, i1, e1); } if (bevvert_is_weld_cross(bv2)) { weld_cross_attrs_copy(bm, bv2, vm2, i2, e2); } } /* Find xnew > x0 so that distance((x0,y0), (xnew, ynew)) = dtarget. * False position Illinois method used because the function is somewhat linear * -> linear interpolation converges fast. * Assumes that the gradient is always between 1 and -1 for x in [x0, x0+dtarget]. */ static double find_superellipse_chord_endpoint(double x0, double dtarget, float r, bool rbig) { double xmin, xmax, ymin, ymax, dmaxerr, dminerr, dnewerr, xnew, ynew; double y0 = superellipse_co(x0, r, rbig); const double tol = 1e-13; /* accumulates for many segments so use low value. */ const int maxiter = 10; bool lastupdated_upper; /* For gradient between -1 and 1, xnew can only be in [x0 + sqrt(2)/2*dtarget, x0 + dtarget]. */ xmin = x0 + M_SQRT2 / 2.0 * dtarget; if (xmin > 1.0) { xmin = 1.0; } xmax = x0 + dtarget; if (xmax > 1.0) { xmax = 1.0; } ymin = superellipse_co(xmin, r, rbig); ymax = superellipse_co(xmax, r, rbig); /* Note: using distance**2 (no sqrt needed) does not converge that well. */ dmaxerr = sqrt(pow((xmax - x0), 2) + pow((ymax - y0), 2)) - dtarget; dminerr = sqrt(pow((xmin - x0), 2) + pow((ymin - y0), 2)) - dtarget; xnew = xmax - dmaxerr * (xmax - xmin) / (dmaxerr - dminerr); lastupdated_upper = true; for (int iter = 0; iter < maxiter; iter++) { ynew = superellipse_co(xnew, r, rbig); dnewerr = sqrt(pow((xnew - x0), 2) + pow((ynew - y0), 2)) - dtarget; if (fabs(dnewerr) < tol) { break; } if (dnewerr < 0) { xmin = xnew; ymin = ynew; dminerr = dnewerr; if (!lastupdated_upper) { xnew = (dmaxerr / 2 * xmin - dminerr * xmax) / (dmaxerr / 2 - dminerr); } else { xnew = xmax - dmaxerr * (xmax - xmin) / (dmaxerr - dminerr); } lastupdated_upper = false; } else { xmax = xnew; ymax = ynew; dmaxerr = dnewerr; if (lastupdated_upper) { xnew = (dmaxerr * xmin - dminerr / 2 * xmax) / (dmaxerr - dminerr / 2); } else { xnew = xmax - dmaxerr * (xmax - xmin) / (dmaxerr - dminerr); } lastupdated_upper = true; } } return xnew; } /** * This search procedure to find equidistant points (x,y) in the first * superellipse quadrant works for every superellipse exponent but is more * expensive than known solutions for special cases. * Call the point on superellipse that intersects x=y line mx. * For r>=1 use only the range x in [0,mx] and mirror the rest along x=y line, * for r<1 use only x in [mx,1]. Points are initially spaced and iteratively * repositioned to have the same distance. */ static void find_even_superellipse_chords_general(int seg, float r, double *xvals, double *yvals) { const int smoothitermax = 10; const double error_tol = 1e-7; int i; int imax = (seg + 1) / 2 - 1; /* Ceiling division - 1. */ double d, dmin, dmax; double davg; double mx; double sum; double temp; bool precision_reached = true; bool seg_odd = seg % 2; bool rbig; if (r > 1.0f) { rbig = true; mx = pow(0.5, 1.0 / r); } else { rbig = false; mx = 1 - pow(0.5, 1.0 / r); } /* Initial positions, linear spacing along x axis. */ for (i = 0; i <= imax; i++) { xvals[i] = i * mx / seg * 2; yvals[i] = superellipse_co(xvals[i], r, rbig); } yvals[0] = 1; /* Smooth distance loop. */ for (int iter = 0; iter < smoothitermax; iter++) { sum = 0.0; dmin = 2.0; dmax = 0.0; /* Update distances between neighbor points. Store the highest and * lowest to see if the maximum error to average distance (which isn't * known yet) is below required precision. */ for (i = 0; i < imax; i++) { d = sqrt(pow((xvals[i + 1] - xvals[i]), 2) + pow((yvals[i + 1] - yvals[i]), 2)); sum += d; if (d > dmax) { dmax = d; } if (d < dmin) { dmin = d; } } /* For last distance, weight with 1/2 if seg_odd. */ if (seg_odd) { sum += M_SQRT2 / 2 * (yvals[imax] - xvals[imax]); davg = sum / (imax + 0.5); } else { sum += sqrt(pow((xvals[imax] - mx), 2) + pow((yvals[imax] - mx), 2)); davg = sum / (imax + 1.0); } /* Max error in tolerance? -> Quit. */ if (dmax - davg > error_tol) { precision_reached = false; } if (dmin - davg < error_tol) { precision_reached = false; } if (precision_reached) { break; } /* Update new coordinates. */ for (i = 1; i <= imax; i++) { xvals[i] = find_superellipse_chord_endpoint(xvals[i - 1], davg, r, rbig); yvals[i] = superellipse_co(xvals[i], r, rbig); } } /* Fill remaining. */ if (!seg_odd) { xvals[imax + 1] = mx; yvals[imax + 1] = mx; } for (i = imax + 1; i <= seg; i++) { yvals[i] = xvals[seg - i]; xvals[i] = yvals[seg - i]; } if (!rbig) { for (i = 0; i <= seg; i++) { temp = xvals[i]; xvals[i] = 1.0 - yvals[i]; yvals[i] = 1.0 - temp; } } } /** * Find equidistant points (x0,y0), (x1,y1)... (xn,yn) on the superellipse * function in the first quadrant. For special profiles (linear, arc, * rectangle) the point can be calculated easily, for any other profile a more * expensive search procedure must be used because there is no known closed * form for equidistant parametrization. * xvals and yvals should be size n+1. */ static void find_even_superellipse_chords(int n, float r, double *xvals, double *yvals) { int i, n2; double temp; bool seg_odd = n % 2; n2 = n / 2; /* Special cases. */ if (r == PRO_LINE_R) { /* Linear spacing. */ for (i = 0; i <= n; i++) { xvals[i] = (double)i / n; yvals[i] = 1.0 - (double)i / n; } return; } if (r == PRO_CIRCLE_R) { temp = (M_PI / 2) / n; /* Angle spacing. */ for (i = 0; i <= n; i++) { xvals[i] = sin(i * temp); yvals[i] = cos(i * temp); } return; } if (r == PRO_SQUARE_IN_R) { /* n is even, distribute first and second half linear. */ if (!seg_odd) { for (i = 0; i <= n2; i++) { xvals[i] = 0.0; yvals[i] = 1.0 - (double)i / n2; xvals[n - i] = yvals[i]; yvals[n - i] = xvals[i]; } } /* n is odd, so get one corner-cut chord. */ else { temp = 1.0 / (n2 + M_SQRT2 / 2.0); for (i = 0; i <= n2; i++) { xvals[i] = 0.0; yvals[i] = 1.0 - (double)i * temp; xvals[n - i] = yvals[i]; yvals[n - i] = xvals[i]; } } return; } if (r == PRO_SQUARE_R) { /* n is even, distribute first and second half linear. */ if (!seg_odd) { for (i = 0; i <= n2; i++) { xvals[i] = (double)i / n2; yvals[i] = 1.0; xvals[n - i] = yvals[i]; yvals[n - i] = xvals[i]; } } /* n is odd, so get one corner-cut chord. */ else { temp = 1.0 / (n2 + M_SQRT2 / 2); for (i = 0; i <= n2; i++) { xvals[i] = (double)i * temp; yvals[i] = 1.0; xvals[n - i] = yvals[i]; yvals[n - i] = xvals[i]; } } return; } /* For general case use the more expensive search algorithm. */ find_even_superellipse_chords_general(n, r, xvals, yvals); } /** * Find the profile's "fullness," which is the fraction of the space it takes up way from the * boundvert's centroid to the original vertex for a non-custom profile, or in the case of a * custom profile, the average "height" of the profile points along its centerline. */ static float find_profile_fullness(BevelParams *bp) { float fullness; int nseg = bp->seg; /* Precalculated fullness for circle profile radius and more common low seg values. */ #define CIRCLE_FULLNESS_SEGS 11 static const float circle_fullness[CIRCLE_FULLNESS_SEGS] = { 0.0f, /* nsegs == 1 */ 0.559f, /* 2 */ 0.642f, /* 3 */ 0.551f, /* 4 */ 0.646f, /* 5 */ 0.624f, /* 6 */ 0.646f, /* 7 */ 0.619f, /* 8 */ 0.647f, /* 9 */ 0.639f, /* 10 */ 0.647f, /* 11 */ }; if (bp->profile_type == BEVEL_PROFILE_CUSTOM) { /* Set fullness to the average "height" of the profile's sampled points. */ fullness = 0.0f; for (int i = 0; i < nseg; i++) { /* Don't use the end points. */ fullness += (float)(bp->pro_spacing.xvals[i] + bp->pro_spacing.yvals[i]) / (2.0f * nseg); } } else { /* An offline optimization process found fullness that led to closest fit to sphere as * a function of r and ns (for case of cube corner). */ if (bp->pro_super_r == PRO_LINE_R) { fullness = 0.0f; } else if (bp->pro_super_r == PRO_CIRCLE_R && nseg > 0 && nseg <= CIRCLE_FULLNESS_SEGS) { fullness = circle_fullness[nseg - 1]; } else { /* Linear regression fit found best linear function, separately for even/odd segs. */ if (nseg % 2 == 0) { fullness = 2.4506f * bp->profile - 0.00000300f * nseg - 0.6266f; } else { fullness = 2.3635f * bp->profile + 0.000152f * nseg - 0.6060f; } } } return fullness; } /** * Fills the ProfileSpacing struct with the 2D coordinates for the profile's vertices. * The superellipse used for multi-segment profiles does not have a closed-form way * to generate evenly spaced points along an arc. We use an expensive search procedure * to find the parameter values that lead to bp->seg even chords. * We also want spacing for a number of segments that is a power of 2 >= bp->seg (but at least 4). * Use doubles because otherwise we cannot come close to float precision for final results. * * \param pro_spacing: The struct to fill. Changes depending on whether there needs * to be a separate miter profile. */ static void set_profile_spacing(BevelParams *bp, ProfileSpacing *pro_spacing, bool custom) { int seg, seg_2; seg = bp->seg; seg_2 = power_of_2_max_i(bp->seg); if (seg > 1) { /* Sample the input number of segments. */ pro_spacing->xvals = (double *)BLI_memarena_alloc(bp->mem_arena, (size_t)(seg + 1) * sizeof(double)); pro_spacing->yvals = (double *)BLI_memarena_alloc(bp->mem_arena, (size_t)(seg + 1) * sizeof(double)); if (custom) { /* Make sure the curve profile's sample table is full. */ if (bp->custom_profile->segments_len != seg || !bp->custom_profile->segments) { BKE_curveprofile_init((CurveProfile *)bp->custom_profile, (short)seg); } /* Copy segment locations into the profile spacing struct. */ for (int i = 0; i < seg + 1; i++) { pro_spacing->xvals[i] = (double)bp->custom_profile->segments[i].y; pro_spacing->yvals[i] = (double)bp->custom_profile->segments[i].x; } } else { find_even_superellipse_chords(seg, bp->pro_super_r, pro_spacing->xvals, pro_spacing->yvals); } /* Sample the seg_2 segments used for subdividing the vertex meshes. */ if (seg_2 == 2) { seg_2 = 4; } bp->pro_spacing.seg_2 = seg_2; if (seg_2 == seg) { pro_spacing->xvals_2 = pro_spacing->xvals; pro_spacing->yvals_2 = pro_spacing->yvals; } else { pro_spacing->xvals_2 = (double *)BLI_memarena_alloc(bp->mem_arena, (size_t)(seg_2 + 1) * sizeof(double)); pro_spacing->yvals_2 = (double *)BLI_memarena_alloc(bp->mem_arena, (size_t)(seg_2 + 1) * sizeof(double)); if (custom) { /* Make sure the curve profile widget's sample table is full of the seg_2 samples. */ BKE_curveprofile_init((CurveProfile *)bp->custom_profile, (short)seg_2); /* Copy segment locations into the profile spacing struct. */ for (int i = 0; i < seg_2 + 1; i++) { pro_spacing->xvals_2[i] = (double)bp->custom_profile->segments[i].y; pro_spacing->yvals_2[i] = (double)bp->custom_profile->segments[i].x; } } else { find_even_superellipse_chords( seg_2, bp->pro_super_r, pro_spacing->xvals_2, pro_spacing->yvals_2); } } } else { /* Only 1 segment, we don't need any profile information. */ pro_spacing->xvals = NULL; pro_spacing->yvals = NULL; pro_spacing->xvals_2 = NULL; pro_spacing->yvals_2 = NULL; pro_spacing->seg_2 = 0; } } /** * Assume we have a situation like: *
* a d * \ / * A \ / C * \ th1 th2/ * b---------c * B ** * where edges are A, B, and C, following a face around vertices a, b, c, d. * th1 is angle abc and th2 is angle bcd; * and the argument EdgeHalf eb is B, going from b to c. * In general case, edge offset specs for A, B, C have * the form ka*t, kb*t, kc*t where ka, kb, kc are some factors * (may be 0) and t is the current bp->offset. * We want to calculate t at which the clone of B parallel * to it collapses. This can be calculated using trig. * Another case of geometry collision that can happen is * When B slides along A because A is unbeveled. * Then it might collide with a. Similarly for B sliding along C. */ static float geometry_collide_offset(BevelParams *bp, EdgeHalf *eb) { EdgeHalf *ea, *ec, *ebother; BevVert *bvc; BMLoop *lb; BMVert *va, *vb, *vc, *vd; float ka, kb, kc, g, h, t, den, no_collide_offset, th1, th2, sin1, sin2, tan1, tan2, limit; limit = no_collide_offset = bp->offset + 1e6; if (bp->offset == 0.0f) { return no_collide_offset; } kb = eb->offset_l_spec; ea = eb->next; /* Note: this is in direction b --> a. */ ka = ea->offset_r_spec; if (eb->is_rev) { vc = eb->e->v1; vb = eb->e->v2; } else { vb = eb->e->v1; vc = eb->e->v2; } va = ea->is_rev ? ea->e->v1 : ea->e->v2; bvc = NULL; ebother = find_other_end_edge_half(bp, eb, &bvc); if (ebother != NULL) { ec = ebother->prev; /* Note: this is in direction c --> d. */ vc = bvc->v; kc = ec->offset_l_spec; vd = ec->is_rev ? ec->e->v1 : ec->e->v2; } else { /* No bevvert for w, so C can't be beveled. */ kc = 0.0f; ec = NULL; /* Find an edge from c that has same face. */ lb = BM_face_edge_share_loop(eb->fnext, eb->e); if (!lb) { return no_collide_offset; } if (lb->next->v == vc) { vd = lb->next->next->v; } else if (lb->v == vc) { vd = lb->prev->v; } else { return no_collide_offset; } } if (ea->e == eb->e || (ec && ec->e == eb->e)) { return no_collide_offset; } ka = ka / bp->offset; kb = kb / bp->offset; kc = kc / bp->offset; th1 = angle_v3v3v3(va->co, vb->co, vc->co); th2 = angle_v3v3v3(vb->co, vc->co, vd->co); /* First calculate offset at which edge B collapses, which happens * when advancing clones of A, B, C all meet at a point. * This only happens if at least two of those three edges have non-zero k's. */ sin1 = sinf(th1); sin2 = sinf(th2); if ((ka > 0.0f) + (kb > 0.0f) + (kc > 0.0f) >= 2) { tan1 = tanf(th1); tan2 = tanf(th2); g = tan1 * tan2; h = sin1 * sin2; den = g * (ka * sin2 + kc * sin1) + kb * h * (tan1 + tan2); if (den != 0.0f) { t = BM_edge_calc_length(eb->e); t *= g * h / den; if (t >= 0.0f) { limit = t; } } } /* Now check edge slide cases. */ if (kb > 0.0f && ka == 0.0f /*&& bvb->selcount == 1 && bvb->edgecount > 2 */) { t = BM_edge_calc_length(ea->e); t *= sin1 / kb; if (t >= 0.0f && t < limit) { limit = t; } } if (kb > 0.0f && kc == 0.0f /* && bvc && ec && bvc->selcount == 1 && bvc->edgecount > 2 */) { t = BM_edge_calc_length(ec->e); t *= sin2 / kb; if (t >= 0.0f && t < limit) { limit = t; } } return limit; } /** * We have an edge A between vertices a and b, where EdgeHalf ea is the half of A that starts at a. * For vertex-only bevels, the new vertices slide from a at a rate ka*t and from b at a rate kb*t. * We want to calculate the t at which the two meet. */ static float vertex_collide_offset(BevelParams *bp, EdgeHalf *ea) { float limit, ka, kb, no_collide_offset, la, kab; EdgeHalf *eb; limit = no_collide_offset = bp->offset + 1e6; if (bp->offset == 0.0f) { return no_collide_offset; } ka = ea->offset_l_spec / bp->offset; eb = find_other_end_edge_half(bp, ea, NULL); kb = eb ? eb->offset_l_spec / bp->offset : 0.0f; kab = ka + kb; la = BM_edge_calc_length(ea->e); if (kab <= 0.0f) { return no_collide_offset; } limit = la / kab; return limit; } /** * Calculate an offset that is the lesser of the current bp.offset and the maximum possible offset * before geometry collisions happen. If the offset changes as a result of this, adjust the current * edge offset specs to reflect this clamping, and store the new offset in bp.offset. */ static void bevel_limit_offset(BevelParams *bp, BMesh *bm) { BevVert *bv; EdgeHalf *eh; BMIter iter; BMVert *bmv; float limited_offset, offset_factor, collision_offset; int i; limited_offset = bp->offset; BM_ITER_MESH (bmv, &iter, bm, BM_VERTS_OF_MESH) { if (!BM_elem_flag_test(bmv, BM_ELEM_TAG)) { continue; } bv = find_bevvert(bp, bmv); if (!bv) { continue; } for (i = 0; i < bv->edgecount; i++) { eh = &bv->edges[i]; if (bp->affect_type == BEVEL_AFFECT_VERTICES) { collision_offset = vertex_collide_offset(bp, eh); if (collision_offset < limited_offset) { limited_offset = collision_offset; } } else { collision_offset = geometry_collide_offset(bp, eh); if (collision_offset < limited_offset) { limited_offset = collision_offset; } } } } if (limited_offset < bp->offset) { /* All current offset specs have some number times bp->offset, * so we can just multiply them all by the reduction factor * of the offset to have the effect of recalculating the specs * with the new limited_offset. */ offset_factor = limited_offset / bp->offset; BM_ITER_MESH (bmv, &iter, bm, BM_VERTS_OF_MESH) { if (!BM_elem_flag_test(bmv, BM_ELEM_TAG)) { continue; } bv = find_bevvert(bp, bmv); if (!bv) { continue; } for (i = 0; i < bv->edgecount; i++) { eh = &bv->edges[i]; eh->offset_l_spec *= offset_factor; eh->offset_r_spec *= offset_factor; eh->offset_l *= offset_factor; eh->offset_r *= offset_factor; } } bp->offset = limited_offset; } } /** * - Currently only bevels BM_ELEM_TAG'd verts and edges. * * - Newly created faces, edges, and verts are BM_ELEM_TAG'd too, * the caller needs to ensure these are cleared before calling * if its going to use this tag. * * - If limit_offset is set, adjusts offset down if necessary * to avoid geometry collisions. * * \warning all tagged edges _must_ be manifold. */ void BM_mesh_bevel(BMesh *bm, const float offset, const int offset_type, const int profile_type, const int segments, const float profile, const bool affect_type, const bool use_weights, const bool limit_offset, const struct MDeformVert *dvert, const int vertex_group, const int mat, const bool loop_slide, const bool mark_seam, const bool mark_sharp, const bool harden_normals, const int face_strength_mode, const int miter_outer, const int miter_inner, const float spread, const float smoothresh, const struct CurveProfile *custom_profile, const int vmesh_method) { BMIter iter, liter; BMVert *v, *v_next; BMEdge *e; BMFace *f; BMLoop *l; BevVert *bv; BevelParams bp = {NULL}; bp.offset = offset; bp.offset_type = offset_type; bp.seg = segments; bp.profile = profile; bp.pro_super_r = -logf(2.0) / logf(sqrtf(profile)); /* Convert to superellipse exponent. */ bp.affect_type = affect_type; bp.use_weights = use_weights; bp.loop_slide = loop_slide; bp.limit_offset = limit_offset; bp.offset_adjust = bp.affect_type != BEVEL_AFFECT_VERTICES && !ELEM(offset_type, BEVEL_AMT_PERCENT, BEVEL_AMT_ABSOLUTE); bp.dvert = dvert; bp.vertex_group = vertex_group; bp.mat_nr = mat; bp.mark_seam = mark_seam; bp.mark_sharp = mark_sharp; bp.harden_normals = harden_normals; bp.face_strength_mode = face_strength_mode; bp.miter_outer = miter_outer; bp.miter_inner = miter_inner; bp.spread = spread; bp.smoothresh = smoothresh; bp.face_hash = NULL; bp.profile_type = profile_type; bp.custom_profile = custom_profile; bp.vmesh_method = vmesh_method; /* Disable the miters with the cutoff vertex mesh method, the combination isn't useful anyway. */ if (bp.vmesh_method == BEVEL_VMESH_CUTOFF) { bp.miter_outer = BEVEL_MITER_SHARP; bp.miter_inner = BEVEL_MITER_SHARP; } if (bp.seg <= 1) { bp.seg = 1; } if (profile >= 0.950f) { /* r ~ 692, so PRO_SQUARE_R is 1e4 */ bp.pro_super_r = PRO_SQUARE_R; } else if (fabsf(bp.pro_super_r - PRO_CIRCLE_R) < 1e-4) { bp.pro_super_r = PRO_CIRCLE_R; } else if (fabsf(bp.pro_super_r - PRO_LINE_R) < 1e-4) { bp.pro_super_r = PRO_LINE_R; } else if (bp.pro_super_r < 1e-4) { bp.pro_super_r = PRO_SQUARE_IN_R; } if (bp.offset > 0) { /* Primary alloc. */ bp.vert_hash = BLI_ghash_ptr_new(__func__); bp.mem_arena = BLI_memarena_new(MEM_SIZE_OPTIMAL(1 << 16), __func__); BLI_memarena_use_calloc(bp.mem_arena); /* Get the 2D profile point locations from either the superellipse or the custom profile. */ set_profile_spacing(&bp, &bp.pro_spacing, bp.profile_type == BEVEL_PROFILE_CUSTOM); /* Get the 'fullness' of the profile for the ADJ vertex mesh method. */ if (bp.seg > 1) { bp.pro_spacing.fullness = find_profile_fullness(&bp); } /* Get separate non-custom profile samples for the miter profiles if they are needed */ if (bp.profile_type == BEVEL_PROFILE_CUSTOM && (bp.miter_inner != BEVEL_MITER_SHARP || bp.miter_outer != BEVEL_MITER_SHARP)) { set_profile_spacing(&bp, &bp.pro_spacing_miter, false); } bp.face_hash = BLI_ghash_ptr_new(__func__); BLI_ghash_flag_set(bp.face_hash, GHASH_FLAG_ALLOW_DUPES); math_layer_info_init(&bp, bm); /* Analyze input vertices, sorting edges and assigning initial new vertex positions. */ BM_ITER_MESH (v, &iter, bm, BM_VERTS_OF_MESH) { if (BM_elem_flag_test(v, BM_ELEM_TAG)) { bv = bevel_vert_construct(bm, &bp, v); if (!limit_offset && bv) { build_boundary(&bp, bv, true); } } } /* Perhaps clamp offset to avoid geometry colliisions. */ if (limit_offset) { bevel_limit_offset(&bp, bm); /* Assign initial new vertex positions. */ BM_ITER_MESH (v, &iter, bm, BM_VERTS_OF_MESH) { if (BM_elem_flag_test(v, BM_ELEM_TAG)) { bv = find_bevvert(&bp, v); if (bv) { build_boundary(&bp, bv, true); } } } } /* Perhaps do a pass to try to even out widths. */ if (bp.offset_adjust) { adjust_offsets(&bp, bm); } /* Maintain consistent orientations for the asymmetrical custom profiles. */ if (bp.profile_type == BEVEL_PROFILE_CUSTOM) { BM_ITER_MESH (e, &iter, bm, BM_EDGES_OF_MESH) { if (BM_elem_flag_test(e, BM_ELEM_TAG)) { regularize_profile_orientation(&bp, e); } } } /* Build the meshes around vertices, now that positions are final. */ BM_ITER_MESH (v, &iter, bm, BM_VERTS_OF_MESH) { if (BM_elem_flag_test(v, BM_ELEM_TAG)) { bv = find_bevvert(&bp, v); if (bv) { build_vmesh(&bp, bm, bv); } } } /* Build polygons for edges. */ if (bp.affect_type != BEVEL_AFFECT_VERTICES) { BM_ITER_MESH (e, &iter, bm, BM_EDGES_OF_MESH) { if (BM_elem_flag_test(e, BM_ELEM_TAG)) { bevel_build_edge_polygons(bm, &bp, e); } } } /* Extend edge data like sharp edges and precompute normals for harden. */ BM_ITER_MESH (v, &iter, bm, BM_VERTS_OF_MESH) { if (BM_elem_flag_test(v, BM_ELEM_TAG)) { bv = find_bevvert(&bp, v); if (bv) { bevel_extend_edge_data(bv); } } } /* Rebuild face polygons around affected vertices. */ BM_ITER_MESH (v, &iter, bm, BM_VERTS_OF_MESH) { if (BM_elem_flag_test(v, BM_ELEM_TAG)) { bevel_rebuild_existing_polygons(bm, &bp, v); bevel_reattach_wires(bm, &bp, v); } } BM_ITER_MESH_MUTABLE (v, v_next, &iter, bm, BM_VERTS_OF_MESH) { if (BM_elem_flag_test(v, BM_ELEM_TAG)) { BLI_assert(find_bevvert(&bp, v) != NULL); BM_vert_kill(bm, v); } } if (bp.harden_normals) { bevel_harden_normals(&bp, bm); } if (bp.face_strength_mode != BEVEL_FACE_STRENGTH_NONE) { bevel_set_weighted_normal_face_strength(bm, &bp); } /* When called from operator (as opposed to modifier), bm->use_toolflags * will be set, and we need to transfer the oflags to BM_ELEM_TAGs. */ if (bm->use_toolflags) { BM_ITER_MESH (v, &iter, bm, BM_VERTS_OF_MESH) { if (BMO_vert_flag_test(bm, v, VERT_OUT)) { BM_elem_flag_enable(v, BM_ELEM_TAG); } } BM_ITER_MESH (e, &iter, bm, BM_EDGES_OF_MESH) { if (BMO_edge_flag_test(bm, e, EDGE_OUT)) { BM_elem_flag_enable(e, BM_ELEM_TAG); } } } /* Clear the BM_ELEM_LONG_TAG tags, which were only set on some edges in F_EDGE faces. */ BM_ITER_MESH (f, &iter, bm, BM_FACES_OF_MESH) { if (get_face_kind(&bp, f) != F_EDGE) { continue; } BM_ITER_ELEM (l, &liter, f, BM_LOOPS_OF_FACE) { BM_elem_flag_disable(l, BM_ELEM_LONG_TAG); } } /* Primary free. */ BLI_ghash_free(bp.vert_hash, NULL, NULL); BLI_ghash_free(bp.face_hash, NULL, NULL); BLI_memarena_free(bp.mem_arena); } }