diff options
author | Eric Andersen <andersen@codepoet.org> | 1999-10-26 03:32:44 +0400 |
---|---|---|
committer | Eric Andersen <andersen@codepoet.org> | 1999-10-26 03:32:44 +0400 |
commit | 0460ff2e5d443b485c2f6447c8c2ece1b3bec9c3 (patch) | |
tree | d761a790ee864a0a566d29c9d56173763fa04888 /init | |
parent | d143e8f2bd03470e891a5e3ccca5734edd917e73 (diff) |
Stuf
Diffstat (limited to 'init')
-rw-r--r-- | init/init.c | 628 |
1 files changed, 321 insertions, 307 deletions
diff --git a/init/init.c b/init/init.c index c32124dd0..0676bf76d 100644 --- a/init/init.c +++ b/init/init.c @@ -41,144 +41,88 @@ #include <sys/vt.h> /* for vt_stat */ #include <sys/ioctl.h> -static const char init_usage[] = "Used internally by the system."; -static char console[16] = ""; -static const char* default_console = "/dev/tty2"; -static char* first_terminal = NULL; -static const char* second_terminal = "/dev/tty2"; -static const char* log = "/dev/tty3"; -static char* term_ptr = NULL; +#define DEBUG_INIT -static void -message(const char* terminal, const char * pattern, ...) -{ - int fd; - FILE * con = 0; - va_list arguments; - - /* - * Open the console device each time a message is printed. If the user - * has switched consoles, the open will get the new console. If we kept - * the console open, we'd always print to the same one. - */ - if ( !terminal - || ((fd = open(terminal, O_WRONLY|O_NOCTTY)) < 0) - || ((con = fdopen(fd, "w")) == NULL) ) - return; +#define CONSOLE "/dev/console" /* Logical system console */ +#define VT_PRIMARY "/dev/tty0" /* Virtual console master */ +#define VT_SECONDARY "/dev/tty1" /* Virtual console master */ +#define VT_LOG "/dev/tty2" /* Virtual console master */ +#define SHELL "/bin/sh" /* Default shell */ +#define INITSCRIPT "/etc/init.d/rcS" /* Initscript. */ +#define PATH_DEFAULT "PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin" - va_start(arguments, pattern); - vfprintf(con, pattern, arguments); - va_end(arguments); - fclose(con); +static int maxproclen=0; +static char* argv0; + +static char* console = CONSOLE; +static char* second_terminal = "/dev/tty2"; +static char* log = "/dev/tty3"; + + + +/* try to open up the specified device */ +int device_open(char* device, int mode) +{ + int m, f, fd = -1; + + mode = m | O_NONBLOCK; + + /* Retry up to 5 times */ + for(f = 0; f < 5; f++) + if ((fd = open(device, m)) >= 0) break; + if (fd < 0) return fd; + /* Set original flags. */ + if (m != mode) + fcntl(fd, F_SETFL, mode); + return fd; } -static int -waitfor(int pid) +/* print a message to the specified device */ +void message(char* device, char *fmt, ...) { - int status; - int wpid; - - message(log, "Waiting for process %d.\n", pid); - while ( (wpid = wait(&status)) != pid ) { - if ( wpid > 0 ) { - message( - log - ,"pid %d exited, status=%x.\n" - ,wpid - ,status); - } - } - return wpid; + int fd; + va_list arguments; + if ((fd = device_open(device, O_WRONLY|O_NOCTTY|O_NDELAY)) >= 0) { + va_start(arguments, fmt); + vdprintf(fd, fmt, arguments); + va_end(arguments); + } + close( fd); } -static int -run(const char* program, const char* const* arguments, - const char* terminal, int get_enter) +/* Set terminal settings to reasonable defaults */ +void set_term() { - static const char control_characters[] = { - '\003', - '\034', - '\177', - '\025', - '\004', - '\0', - '\1', - '\0', - '\021', - '\023', - '\032', - '\0', - '\022', - '\017', - '\027', - '\026', - '\0' - }; - - static char * environment[] = { - "HOME=/", - "PATH=/bin:/sbin:/usr/bin:/usr/sbin", - "SHELL=/bin/sh", - 0, - "USER=root", - 0 - }; - - static const char press_enter[] = - "\nPlease press Enter to activate this console. "; - - int pid; - - environment[3]=term_ptr; - - pid = fork(); - if ( pid == 0 ) { - struct termios t; - const char * const * arg; - - close(0); - close(1); - close(2); - setsid(); - - open(terminal, O_RDWR); - dup(0); - dup(0); - tcsetpgrp(0, getpgrp()); - - tcgetattr(0, &t); - memcpy(t.c_cc, control_characters, sizeof(control_characters)); - t.c_line = 0; - t.c_iflag = ICRNL|IXON|IXOFF; - t.c_oflag = OPOST|ONLCR; - t.c_lflag = ISIG|ICANON|ECHO|ECHOE|ECHOK|ECHOCTL|ECHOKE|IEXTEN; - tcsetattr(0, TCSANOW, &t); - - if ( get_enter ) { - /* - * Save memory by not exec-ing anything large (like a shell) - * before the user wants it. This is critical if swap is not - * enabled and the system has low memory. Generally this will - * be run on the second virtual console, and the first will - * be allowed to start a shell or whatever an init script - * specifies. - */ - char c; - write(1, press_enter, sizeof(press_enter) - 1); - read(0, &c, 1); - } - - message(log, "Executing "); - arg = arguments; - while ( *arg != 0 ) - message(log, "%s ", *arg++); - message(log, "\n"); - - execve(program, (char * *)arguments, (char * *)environment); - message(log, "%s: could not execute: %s.\r\n", program, strerror(errno)); - exit(-1); - } - return pid; + int fd; + struct termios tty; + + if ((fd = device_open(console, O_RDWR|O_NOCTTY)) < 0) { + message(log, "can't open %s", console); + return; + } + ioctl(fd, TCGETS, &tty); + tty.c_cflag &= CBAUD|CBAUDEX|CSIZE|CSTOPB|PARENB|PARODD; + tty.c_cflag |= HUPCL|CLOCAL; + + tty.c_cc[VINTR] = 3; + tty.c_cc[VQUIT] = 28; + tty.c_cc[VERASE] = 127; + tty.c_cc[VKILL] = 24; + tty.c_cc[VEOF] = 4; + tty.c_cc[VTIME] = 0; + tty.c_cc[VMIN] = 1; + tty.c_cc[VSTART] = 17; + tty.c_cc[VSTOP] = 19; + tty.c_cc[VSUSP] = 26; + + /* Set pre and post processing */ + tty.c_iflag = IGNPAR|ICRNL|IXON|IXANY; + tty.c_oflag = OPOST|ONLCR; + tty.c_lflag = ISIG|ICANON|ECHO|ECHOCTL|ECHOPRT|ECHOKE; + + /* Now set the terminal line. */ + ioctl(fd, TCSETS, &tty); + close( fd); } static int @@ -217,33 +161,168 @@ set_free_pages() fclose(f); } + static void -shutdown_system(void) +console_init() { - static const char * const umount_args[] = {"/bin/umount", "-a", "-n", 0}; - static const char * const swapoff_args[] = {"/bin/swapoff", "-a", 0}; + int fd; + int tried_devcons = 0; + int tried_vtmaster = 0; + char *s; + + if ((s = getenv("CONSOLE")) != NULL) + console = s; + else { + console = CONSOLE; + tried_devcons++; + } + while ((fd = open(console, O_RDONLY|O_NONBLOCK)) < 0) { + if (!tried_devcons) { + tried_devcons++; + console = CONSOLE; + continue; + } + if (!tried_vtmaster) { + tried_vtmaster++; + console = VT_PRIMARY; + continue; + } + break; + } + if (fd < 0) + console = "/dev/null"; + else + close(fd); +} - message(console, "The system is going down NOW !!"); - sync(); - /* Allow Ctrl-Alt-Del to reboot system. */ - reboot(RB_ENABLE_CAD); +static int +waitfor(int pid) +{ + int status, wpid; - /* Send signals to every process _except_ pid 1 */ - message(console, "Sending SIGHUP to all processes.\r\n"); - kill(-1, SIGHUP); - sleep(2); - sync(); - message(console, "Sending SIGKILL to all processes.\r\n"); - kill(-1, SIGKILL); - sleep(1); - waitfor(run("/bin/swapoff", swapoff_args, console, 0)); - waitfor(run("/bin/umount", umount_args, console, 0)); - sync(); - if (get_kernel_revision() <= 2*65536+2*256+11) { - /* Removed bdflush call, kupdate in kernels >2.2.11 */ - bdflush(1, 0); - sync(); + message(log, "Waiting for process %d.\n", pid); + while ( (wpid = wait(&status)) != pid ) { + if ( wpid > 0 ) + message(log,"pid %d exited, status=%x.\n", wpid, status); + } + return wpid; +} + +static int +run(const char* command, char* terminal, int get_enter) +{ + int f, pid; + char *args[16]; + char buf[256]; + char* ptr; + static const char press_enter[] = + "\nPlease press Enter to activate this console. "; + + + /* Make a proper command from the command string */ + strcpy(buf, command); + ptr = buf; + for(f = 1; f < 15; f++) { + /* Skip white space */ + while(*ptr == ' ' || *ptr == '\t') ptr++; + args[f] = ptr; + /* May be trailing space.. */ + if (*ptr == 0) break; + /* Skip this `word' */ + while(*ptr && *ptr != ' ' && *ptr != '\t' && *ptr != '#') + ptr++; + /* If end-of-line, break */ + if (*ptr == '#' || *ptr == 0) { + f++; + *ptr = 0; + break; + } + /* End word with \0 and continue */ + args[f] = NULL; + } + args[0] = args[1]; + + + if ((pid = fork()) == 0) { + /* Clean up */ + close(0); + close(1); + close(2); + setsid(); + + if ((f = device_open(terminal, O_RDWR|O_NOCTTY)) < 0) { + message( log, "open(%s) failed: %s", terminal, strerror(errno)); + return -1; + } + dup(f); + dup(f); + tcsetpgrp(0, getpgrp()); + set_term(); + + if ( get_enter ) { + /* + * Save memory by not exec-ing anything large (like a shell) + * before the user wants it. This is critical if swap is not + * enabled and the system has low memory. Generally this will + * be run on the second virtual console, and the first will + * be allowed to start a shell or whatever an init script + * specifies. + */ + char c; + write(1, press_enter, sizeof(press_enter) - 1); + read(0, &c, 1); } + + /* Log the process name and args */ + message(log, "Executing '%s'\n", command); + + /* Now run it. This should take over the PID, so nothing + * further in init.c should be run by this PID. */ + execvp(args[1], args + 1); + + /* If shell scripts are not executed, force the issue */ + if (errno == ENOEXEC) { + char buf[256]; + args[1] = SHELL; + args[2] = "-c"; + strcpy(buf, "exec "); + strcat(buf, command); + args[3] = buf; + args[4] = NULL; + execvp(args[1], args + 1); + } + message(log, "Could not execute '%s'\n", command, strerror(errno)); + exit(-1); + } + return pid; +} + +#ifndef DEBUG_INIT +static void +shutdown_system(void) +{ + + message(console, "The system is going down NOW !!"); + sync(); + /* Allow Ctrl-Alt-Del to reboot system. */ + reboot(RB_ENABLE_CAD); + + /* Send signals to every process _except_ pid 1 */ + message(console, "Sending SIGHUP to all processes.\r\n"); + kill(-1, SIGHUP); + sleep(2); + sync(); + message(console, "Sending SIGKILL to all processes.\r\n"); + kill(-1, SIGKILL); + sleep(1); + waitfor(run("/bin/swapoff -a", console, 0)); + waitfor(run("/bin/umount -a -n", console, 0)); + sync(); + if (get_kernel_revision() <= 2*65536+2*256+11) { + /* Removed bdflush call, kupdate in kernels >2.2.11 */ + bdflush(1, 0); + sync(); + } } static void @@ -251,7 +330,7 @@ halt_signal(int sig) { shutdown_system(); message(console, "The system is halted. Press CTRL-ALT-DEL or turn off power\r\n"); - reboot( RB_HALT_SYSTEM); + reboot( RB_POWER_OFF); exit(0); } @@ -263,202 +342,136 @@ reboot_signal(int sig) reboot( RB_AUTOBOOT); exit(0); } +#endif -static void -configure_terminals( int serial_cons, int single_user_mode ) +int setproctitle(char *fmt, ...) { - char *tty; - struct serial_struct sr; - struct vt_stat vt; - - - switch (serial_cons) { - case -1: - /* 2.2 kernels: - * identify the real console backend and try to make use of it */ - if (ioctl(0,TIOCGSERIAL,&sr) == 0) { - sprintf( console, "/dev/ttyS%d", sr.line ); - serial_cons = sr.line+1; - } - else if (ioctl(0, VT_GETSTATE, &vt) == 0) { - sprintf( console, "/dev/tty%d", vt.v_active ); - serial_cons = 0; - } - else { - /* unknown backend: fallback to /dev/console */ - strcpy( console, "/dev/console" ); - serial_cons = 0; - } - break; - - case 1: - strcpy( console, "/dev/cua0" ); - break; - case 2: - strcpy( console, "/dev/cua1" ); - break; - default: - tty = ttyname(0); - if (tty) { - strcpy( console, tty ); - if (!strncmp( tty, "/dev/cua", 8 )) - serial_cons=1; - } - else - /* falls back to /dev/tty1 if an error occurs */ - strcpy( console, default_console ); - } - if (!first_terminal) - first_terminal = console; -#if defined (__sparc__) - if (serial_cons > 0 && !strncmp(term_ptr,"TERM=linux",10)) - term_ptr = "TERM=vt100"; -#endif - if (serial_cons) { - /* disable other but the first terminal: - * VT is not initialized anymore on 2.2 kernel when booting from - * serial console, therefore modprobe is flooding the display with - * "can't locate module char-major-4" messages. */ - log = 0; - second_terminal = 0; - } + va_list ap; + int len; + char buf[256]; + + buf[0] = 0; + va_start(ap, fmt); + len = vsprintf(buf, fmt, ap); + va_end(ap); + memset(argv0, 0, maxproclen + 1); + strncpy(argv0, buf, maxproclen); + return len; } extern int init_main(int argc, char * * argv) { - const char * rc_arguments[100]; - const char * arguments[100]; - int run_rc = TRUE; - int j; - int pid1 = 0; - int pid2 = 0; - struct stat statbuf; - const char * tty_commands[3] = { "etc/init.d/rcS", "bin/sh"}; - int serial_console = 0; - int retval; - - /* - * If I am started as /linuxrc instead of /sbin/init, I don't have the - * environment that init expects. I can't fix the signal behavior. Try - * to divorce from the controlling terminal with setsid(). This won't work - * if I am the process group leader. - */ - setsid(); - + int run_rc = TRUE; + int pid1 = 0; + int pid2 = 0; + struct stat statbuf; + const char* init_commands = SHELL "-c exec " INITSCRIPT; + const char* shell_commands = SHELL; + const char* tty0_commands = init_commands; + const char* tty1_commands = shell_commands; + const char* no_memory = + "Sorry, your computer does not have enough memory.\n"; + + /* For later use */ + argv0 = argv[0]; + maxproclen = strlen(argv[0]); + setproctitle("init [boot]"); + + +#ifndef DEBUG_INIT + /* Set up sig handlers */ signal(SIGUSR1, halt_signal); + signal(SIGSEGV, halt_signal); + signal(SIGPWR, halt_signal); + signal(SIGALRM, halt_signal); + signal(SIGHUP, halt_signal); signal(SIGUSR2, reboot_signal); - signal(SIGINT, reboot_signal); + signal(SIGINT, reboot_signal); signal(SIGTERM, reboot_signal); +#endif + /* Figure out where the default console should be */ + console_init(); + /* Turn off rebooting via CTL-ALT-DEL -- we get a + * SIGINT on CAD so we can shut things down gracefully... */ +#ifndef DEBUG_INIT reboot(RB_DISABLE_CAD); +#endif - message(log, "%s: started. ", argv[0]); + /* Close whatever files are open, and reset the console. */ + close(0); + close(1); + close(2); + set_term(); + setsid(); - for ( j = 1; j < argc; j++ ) { - if ( strcmp(argv[j], "single") == 0 ) { - run_rc = FALSE; - tty_commands[0] = "bin/sh"; - tty_commands[1] = 0; - } - } - for ( j = 0; __environ[j] != 0; j++ ) { - if ( strncmp(__environ[j], "tty", 3) == 0 - && __environ[j][3] >= '1' - && __environ[j][3] <= '2' - && __environ[j][4] == '=' ) { - const char * s = &__environ[j][5]; + /* Make sure PATH is set to something sane */ + if (getenv("PATH") == NULL) + putenv(PATH_DEFAULT); - if ( *s == 0 || strcmp(s, "off") == 0 ) - s = 0; + /* Hello world */ + message(console, "%s started: BusyBox v%s (%s) multi-call binary", + argv[0], BB_VER, BB_BT); + message(log, "%s started: BusyBox v%s (%s) multi-call binary", + argv[0], BB_VER, BB_BT); - tty_commands[__environ[j][3] - '1'] = s; - } - /* Should catch the syntax of Sparc kernel console setting. */ - /* The kernel does not recognize a serial console when getting*/ - /* console=/dev/ttySX !! */ - else if ( strcmp(__environ[j], "console=ttya") == 0 ) { - serial_console=1; - } - else if ( strcmp(__environ[j], "console=ttyb") == 0 ) { - serial_console=2; - } - /* standard console settings */ - else if ( strncmp(__environ[j], "console=", 8) == 0 ) { - first_terminal=&(__environ[j][8]); - } - else if ( strncmp(__environ[j], "TERM=", 5) == 0) { - term_ptr=__environ[j]; - } - } - printf("mounting /proc ...\n"); + /* Mount /proc */ + message(console, "Mounting /proc: \n"); if (mount("/proc","/proc","proc",0,0)) { - perror("mounting /proc failed\n"); - } - printf("\tdone.\n"); - - if (get_kernel_revision() >= 2*65536+1*256+71) { - /* if >= 2.1.71 kernel, /dev/console is not a symlink anymore: - * use it as primary console */ - serial_console=-1; + message(log, "%s: could not mount /proc!\n", argv[0]); + message(console, "failed!\n"); } + message(console, "done.\n"); - /* Make sure /etc/init.d/rc exists */ - retval= stat(tty_commands[0],&statbuf); - if (retval) - run_rc = FALSE; - - configure_terminals( serial_console, run_rc); + /* Make sure there is enough memory to do something useful*/ set_free_pages(); - - /* not enough memory to do anything useful*/ if (mem_total() < 2000) { + int retval; retval= stat("/etc/fstab",&statbuf); if (retval) { - printf("You do not have enough RAM, sorry.\n"); + message(console, "%s", no_memory); while (1) { sleep(1);} } else { /* Try to turn on swap */ - static const char * const swapon_args[] = {"/bin/swapon", "-a", 0}; - waitfor(run("/bin/swapon", swapon_args, console, 0)); + waitfor(run("/bin/swapon -a", console, 0)); if (mem_total() < 2000) { - printf("You do not have enough RAM, sorry.\n"); + message(console, "%s", no_memory); while (1) { sleep(1);} } } } - /* - * Don't modify **argv directly, it would show up in the "ps" display. - * I don't want "init" to look like "rc". - */ - rc_arguments[0] = tty_commands[0]; - for ( j = 1; j < argc; j++ ) { - rc_arguments[j] = argv[j]; + /* Check if we are supposed to be in single user mode */ + if (!strcmp(argv[1], "single") || !strcmp(argv[1], "-s") || !strcmp(argv[1], "1")) { + run_rc = FALSE; + tty0_commands = shell_commands; + tty1_commands = 0; + setproctitle("init [S]"); + } else { + setproctitle("init [1]"); } - rc_arguments[j] = 0; - arguments[0] = "-sh"; - arguments[1] = 0; - - /* Ok, now launch the rc script /etc/init.d/rcS and prepare to start up - * some VTs on tty1 and tty2 if somebody hits enter + /* Make sure an init script exists before trying to run it */ + if ( run_rc == TRUE && stat( INITSCRIPT, &statbuf)) { + tty0_commands = shell_commands; + tty1_commands = shell_commands; + } + + /* Ok, now launch the rc script and/or prepare to + * start up some VTs if somebody hits enter... */ for ( ; ; ) { int wpid; int status; - if ( pid1 == 0 && tty_commands[0] ) { - if ( run_rc == TRUE ) { - pid1 = run(tty_commands[0], rc_arguments, first_terminal, 0); - } else { - pid2 = run(tty_commands[1], arguments, first_terminal, 1); - } + if ( pid1 == 0 && *tty0_commands ) { + pid1 = run(tty0_commands, console, 1); } - if ( pid2 == 0 && second_terminal && tty_commands[1] ) { - pid2 = run(tty_commands[1], arguments, second_terminal, 1); + if ( pid2 == 0 && *tty1_commands ) { + pid2 = run(tty1_commands, second_terminal, 1); } wpid = wait(&status); if ( wpid > 0 && wpid != pid1) { @@ -467,6 +480,7 @@ init_main(int argc, char * * argv) if ( wpid == pid2 ) { pid2 = 0; } + sleep(1); } } |