diff options
Diffstat (limited to 'Documentation')
-rw-r--r-- | Documentation/RelNotes-1.6.4.2.txt | 32 | ||||
-rw-r--r-- | Documentation/RelNotes-1.6.5.txt | 60 | ||||
-rw-r--r-- | Documentation/git-archive.txt | 2 | ||||
-rw-r--r-- | Documentation/git-branch.txt | 1 | ||||
-rw-r--r-- | Documentation/git-checkout.txt | 15 | ||||
-rw-r--r-- | Documentation/git-clean.txt | 1 | ||||
-rw-r--r-- | Documentation/git-clone.txt | 12 | ||||
-rw-r--r-- | Documentation/git-commit.txt | 20 | ||||
-rw-r--r-- | Documentation/git-gc.txt | 2 | ||||
-rw-r--r-- | Documentation/git-instaweb.txt | 2 | ||||
-rw-r--r-- | Documentation/git-mv.txt | 1 | ||||
-rw-r--r-- | Documentation/git-reset.txt | 15 | ||||
-rw-r--r-- | Documentation/git-stash.txt | 22 | ||||
-rw-r--r-- | Documentation/git-submodule.txt | 23 | ||||
-rw-r--r-- | Documentation/git-tag.txt | 1 | ||||
-rw-r--r-- | Documentation/git.txt | 3 |
16 files changed, 188 insertions, 24 deletions
diff --git a/Documentation/RelNotes-1.6.4.2.txt b/Documentation/RelNotes-1.6.4.2.txt new file mode 100644 index 0000000000..c11ec0115c --- /dev/null +++ b/Documentation/RelNotes-1.6.4.2.txt @@ -0,0 +1,32 @@ +GIT v1.6.4.2 Release Notes +========================== + +Fixes since v1.6.4.1 +-------------------- + +* --date=relative output between 1 and 5 years ago rounded the number of + years when saying X years Y months ago, instead of rounding it down. + +* "git add -p" did not handle changes in executable bits correctly + (a regression around 1.6.3). + +* "git apply" did not honor GNU diff's convention to mark the creation/deletion + event with UNIX epoch timestamp on missing side. + +* "git checkout" incorrectly removed files in a directory pointed by a + symbolic link during a branch switch that replaces a directory with + a symbolic link. + +* "git clean -d -f" happily descended into a subdirectory that is managed by a + separate git repository. It now requires two -f options for safety. + +* "git fetch/push" over http transports had two rather grave bugs. + +* "git format-patch --cover-letter" did not prepare the cover letter file + for use with non-ASCII strings when there are the series contributors with + non-ASCII names. + +* "git pull origin branch" and "git fetch origin && git merge origin/branch" + left different merge messages in the resulting commit. + +Other minor documentation updates are included. diff --git a/Documentation/RelNotes-1.6.5.txt b/Documentation/RelNotes-1.6.5.txt index 856047d16f..84a84519d4 100644 --- a/Documentation/RelNotes-1.6.5.txt +++ b/Documentation/RelNotes-1.6.5.txt @@ -31,14 +31,68 @@ Updates since v1.6.4 (subsystems) + * various updates to git-svn and gitweb. + (portability) + * more improvements on mingw port. + (performance) + * On major platforms, the system can be compiled to use with Linus's + block-sha1 implementation of the SHA-1 hash algorithm, which + outperforms the default fallback implementation we borrowed from + Mozzilla. + (usability, bells and whistles) + * refs/replace/ hierarchy is designed to be usable as a replacement + of the "grafts" mechanism, with the added advantage that it can be + transferred across repositories. + + * "git am" learned to optionally ignore whitespace differences. + + * "git am" handles input e-mail files that has CRLF line endings sensibly. + + * "git commit --dry-run $args" is a new recommended way to ask "what would + happen if I try to commit with these arguments." + + * "git cvsimport" now supports password-protected pserver access. + + * "git fast-export" learned --no-data option that can be useful when + reordering commits and trees without touching the contents of + blobs. + + * "git init" learned to mkdir/chdir into a directory when given an + extra argument (i.e. "git init this"). + + * "git instaweb" optionally can use mongoose as the web server. + + * "git log --decorate" can optionally be told with --decorate=full to + give the reference name in full. + + * "git push" can be told to be --quiet. + + * informational output from "git reset" that lists the locally modified + paths is made consistent with that of "git checkout $another_branch". + + * "git status" gives more descriptive output for unmerged paths. + + * "git submodule" learned to give submodule name to scripts run with + "foreach" subcommand. + + * various subcommands to "git submodule" learned --recursive option. + + * "git submodule summary" learned --files option to compare the work + tree vs the commit bound at submodule path, instead of comparing + the index. + (developers) + * With GIT_TEST_OPTS="--root=/p/a/t/h", tests can be run outside the + source directory; using tmpfs may give faster turnaround. + + Fixes since v1.6.4 ------------------ @@ -48,4 +102,8 @@ Fixes since v1.6.4 # Here are fixes that this release has, but have not been backported to # v1.6.4.X series. - +-- +exec >/var/tmp/1 +O=v1.6.4.1-266-g235db15 +echo O=$(git describe master) +git shortlog --no-merges $O..master --not maint diff --git a/Documentation/git-archive.txt b/Documentation/git-archive.txt index bc132c87e1..92444ddf10 100644 --- a/Documentation/git-archive.txt +++ b/Documentation/git-archive.txt @@ -9,7 +9,7 @@ git-archive - Create an archive of files from a named tree SYNOPSIS -------- [verse] -'git archive' --format=<fmt> [--list] [--prefix=<prefix>/] [<extra>] +'git archive' [--format=<fmt>] [--list] [--prefix=<prefix>/] [<extra>] [--output=<file>] [--worktree-attributes] [--remote=<repo> [--exec=<git-upload-archive>]] <tree-ish> [path...] diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt index 99988872eb..aad71dc59a 100644 --- a/Documentation/git-branch.txt +++ b/Documentation/git-branch.txt @@ -76,6 +76,7 @@ OPTIONS based sha1 expressions such as "<branchname>@\{yesterday}". -f:: +--force:: Reset <branchname> to <startpoint> if <branchname> exists already. Without `-f` 'git-branch' refuses to change an existing branch. diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt index ad4b31e892..37c1810e3f 100644 --- a/Documentation/git-checkout.txt +++ b/Documentation/git-checkout.txt @@ -11,6 +11,7 @@ SYNOPSIS 'git checkout' [-q] [-f] [-m] [<branch>] 'git checkout' [-q] [-f] [-m] [-b <new_branch>] [<start_point>] 'git checkout' [-f|--ours|--theirs|-m|--conflict=<style>] [<tree-ish>] [--] <paths>... +'git checkout' --patch [<tree-ish>] [--] [<paths>...] DESCRIPTION ----------- @@ -25,7 +26,7 @@ use the --track or --no-track options, which will be passed to `git branch`. As a convenience, --track without `-b` implies branch creation; see the description of --track below. -When <paths> are given, this command does *not* switch +When <paths> or --patch are given, this command does *not* switch branches. It updates the named paths in the working tree from the index file, or from a named <tree-ish> (most often a commit). In this case, the `-b` and `--track` options are meaningless and giving @@ -45,9 +46,11 @@ file can be discarded to recreate the original conflicted merge result. OPTIONS ------- -q:: +--quiet:: Quiet, suppress feedback messages. -f:: +--force:: When switching branches, proceed even if the index or the working tree differs from HEAD. This is used to throw away local changes. @@ -113,6 +116,16 @@ the conflicted merge in the specified paths. "merge" (default) and "diff3" (in addition to what is shown by "merge" style, shows the original contents). +-p:: +--patch:: + Interactively select hunks in the difference between the + <tree-ish> (or the index, if unspecified) and the working + tree. The chosen hunks are then applied in reverse to the + working tree (and if a <tree-ish> was specified, the index). ++ +This means that you can use `git checkout -p` to selectively discard +edits from your current working tree. + <branch>:: Branch to checkout; if it refers to a branch (i.e., a name that, when prepended with "refs/heads/", is a valid ref), then that diff --git a/Documentation/git-clean.txt b/Documentation/git-clean.txt index ae8938b2de..9d291bdd26 100644 --- a/Documentation/git-clean.txt +++ b/Documentation/git-clean.txt @@ -32,6 +32,7 @@ OPTIONS if you really want to remove such a directory. -f:: +--force:: If the git configuration specifies clean.requireForce as true, 'git-clean' will refuse to run unless given -f or -n. diff --git a/Documentation/git-clone.txt b/Documentation/git-clone.txt index 2c63a0fbae..2e0785e1de 100644 --- a/Documentation/git-clone.txt +++ b/Documentation/git-clone.txt @@ -12,7 +12,7 @@ SYNOPSIS 'git clone' [--template=<template_directory>] [-l] [-s] [--no-hardlinks] [-q] [-n] [--bare] [--mirror] [-o <name>] [-u <upload-pack>] [--reference <repository>] - [--depth <depth>] [--] <repository> [<directory>] + [--depth <depth>] [--recursive] [--] <repository> [<directory>] DESCRIPTION ----------- @@ -84,7 +84,7 @@ its source repository, you can simply run `git repack -a` to copy all objects from the source repository into a pack in the cloned repository. --reference <repository>:: - If the reference repository is on the local machine + If the reference repository is on the local machine, automatically setup .git/objects/info/alternates to obtain objects from the reference repository. Using an already existing repository as an alternate will @@ -147,6 +147,14 @@ objects from the source repository into a pack in the cloned repository. with a long history, and would want to send in fixes as patches. +--recursive:: + After the clone is created, initialize all submodules within, + using their default settings. This is equivalent to running + 'git submodule update --init --recursive' immediately after + the clone is finished. This option is ignored if the cloned + repository does not have a worktree/checkout (i.e. if any of + `--no-checkout`/`-n`, `--bare`, or `--mirror` is given) + <repository>:: The (possibly remote) repository to clone from. See the <<URLS,URLS>> section below for more information on specifying diff --git a/Documentation/git-commit.txt b/Documentation/git-commit.txt index b5d81be7ec..64f94cfe12 100644 --- a/Documentation/git-commit.txt +++ b/Documentation/git-commit.txt @@ -8,8 +8,8 @@ git-commit - Record changes to the repository SYNOPSIS -------- [verse] -'git commit' [-a | --interactive] [-s] [-v] [-u<mode>] [--amend] - [(-c | -C) <commit>] [-F <file> | -m <msg>] +'git commit' [-a | --interactive] [-s] [-v] [-u<mode>] [--amend] [--dry-run] + [(-c | -C) <commit>] [-F <file> | -m <msg>] [--dry-run] [--allow-empty] [--no-verify] [-e] [--author=<author>] [--cleanup=<mode>] [--] [[-i | -o ]<file>...] @@ -42,10 +42,9 @@ The content to be added can be specified in several ways: by one which files should be part of the commit, before finalizing the operation. Currently, this is done by invoking 'git-add --interactive'. -The 'git-status' command can be used to obtain a +The `--dry-run` option can be used to obtain a summary of what is included by any of the above for the next -commit by giving the same set of parameters you would give to -this command. +commit by giving the same set of parameters (options and paths). If you make a commit and then find a mistake immediately after that, you can recover from it with 'git-reset'. @@ -70,6 +69,12 @@ OPTIONS Like '-C', but with '-c' the editor is invoked, so that the user can further edit the commit message. +--dry-run:: + Do not actually make a commit, but show the list of paths + with updates in the index, paths with changes in the work tree, + and paths that are untracked, similar to the one that is given + in the commit log editor. + -F <file>:: --file=<file>:: Take the commit message from the given file. Use '-' to @@ -198,6 +203,11 @@ specified. --quiet:: Suppress commit summary message. +--dry-run:: + Do not create a commit, but show a list of paths that are + to be committed, paths with local changes that will be left + uncommitted and paths that are untracked. + \--:: Do not interpret any more arguments as options. diff --git a/Documentation/git-gc.txt b/Documentation/git-gc.txt index b292e9843a..dcac8c8e29 100644 --- a/Documentation/git-gc.txt +++ b/Documentation/git-gc.txt @@ -61,7 +61,7 @@ automatic consolidation of packs. --prune=<date>:: Prune loose objects older than date (default is 2 weeks ago, - overrideable by the config variable `gc.pruneExpire`). This + overridable by the config variable `gc.pruneExpire`). This option is on by default. --no-prune:: diff --git a/Documentation/git-instaweb.txt b/Documentation/git-instaweb.txt index 22da21a54f..0771f25443 100644 --- a/Documentation/git-instaweb.txt +++ b/Documentation/git-instaweb.txt @@ -29,7 +29,7 @@ OPTIONS The HTTP daemon command-line that will be executed. Command-line options may be specified here, and the configuration file will be added at the end of the command-line. - Currently lighttpd, apache2 and webrick are supported. + Currently apache2, lighttpd, mongoose and webrick are supported. (Default: lighttpd) -m:: diff --git a/Documentation/git-mv.txt b/Documentation/git-mv.txt index 9c5660275b..bdcb58526e 100644 --- a/Documentation/git-mv.txt +++ b/Documentation/git-mv.txt @@ -28,6 +28,7 @@ committed. OPTIONS ------- -f:: +--force:: Force renaming or moving of a file even if the target exists -k:: Skip move or rename actions which would lead to an error diff --git a/Documentation/git-reset.txt b/Documentation/git-reset.txt index abb25d1c00..469cf6dbac 100644 --- a/Documentation/git-reset.txt +++ b/Documentation/git-reset.txt @@ -10,6 +10,7 @@ SYNOPSIS [verse] 'git reset' [--mixed | --soft | --hard | --merge] [-q] [<commit>] 'git reset' [-q] [<commit>] [--] <paths>... +'git reset' --patch [<commit>] [--] [<paths>...] DESCRIPTION ----------- @@ -23,8 +24,9 @@ the undo in the history. If you want to undo a commit other than the latest on a branch, linkgit:git-revert[1] is your friend. -The second form with 'paths' is used to revert selected paths in -the index from a given commit, without moving HEAD. +The second and third forms with 'paths' and/or --patch are used to +revert selected paths in the index from a given commit, without moving +HEAD. OPTIONS @@ -50,6 +52,15 @@ OPTIONS and updates the files that are different between the named commit and the current commit in the working tree. +-p:: +--patch:: + Interactively select hunks in the difference between the index + and <commit> (defaults to HEAD). The chosen hunks are applied + in reverse to the index. ++ +This means that `git reset -p` is the opposite of `git add -p` (see +linkgit:git-add[1]). + -q:: Be quiet, only report errors. diff --git a/Documentation/git-stash.txt b/Documentation/git-stash.txt index 2f5ca7b1a3..3f14b727b8 100644 --- a/Documentation/git-stash.txt +++ b/Documentation/git-stash.txt @@ -13,7 +13,7 @@ SYNOPSIS 'git stash' drop [-q|--quiet] [<stash>] 'git stash' ( pop | apply ) [--index] [-q|--quiet] [<stash>] 'git stash' branch <branchname> [<stash>] -'git stash' [save [--keep-index] [-q|--quiet] [<message>]] +'git stash' [save [--patch] [-k|--[no-]keep-index] [-q|--quiet] [<message>]] 'git stash' clear 'git stash' create @@ -42,15 +42,27 @@ is also possible). OPTIONS ------- -save [--keep-index] [-q|--quiet] [<message>]:: +save [--patch] [--[no-]keep-index] [-q|--quiet] [<message>]:: Save your local modifications to a new 'stash', and run `git reset - --hard` to revert them. This is the default action when no - subcommand is given. The <message> part is optional and gives - the description along with the stashed state. + --hard` to revert them. The <message> part is optional and gives + the description along with the stashed state. For quickly making + a snapshot, you can omit _both_ "save" and <message>, but giving + only <message> does not trigger this action to prevent a misspelled + subcommand from making an unwanted stash. + If the `--keep-index` option is used, all changes already added to the index are left intact. ++ +With `--patch`, you can interactively select hunks from in the diff +between HEAD and the working tree to be stashed. The stash entry is +constructed such that its index state is the same as the index state +of your repository, and its worktree contains only the changes you +selected interactively. The selected changes are then rolled back +from your worktree. ++ +The `--patch` option implies `--keep-index`. You can use +`--no-keep-index` to override this. list [<options>]:: diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt index bb7d159179..5ccdd18c89 100644 --- a/Documentation/git-submodule.txt +++ b/Documentation/git-submodule.txt @@ -11,12 +11,12 @@ SYNOPSIS [verse] 'git submodule' [--quiet] add [-b branch] [--reference <repository>] [--] <repository> <path> -'git submodule' [--quiet] status [--cached] [--] [<path>...] +'git submodule' [--quiet] status [--cached] [--recursive] [--] [<path>...] 'git submodule' [--quiet] init [--] [<path>...] 'git submodule' [--quiet] update [--init] [-N|--no-fetch] [--rebase] - [--reference <repository>] [--merge] [--] [<path>...] + [--reference <repository>] [--merge] [--recursive] [--] [<path>...] 'git submodule' [--quiet] summary [--cached|--files] [--summary-limit <n>] [commit] [--] [<path>...] -'git submodule' [--quiet] foreach <command> +'git submodule' [--quiet] foreach [--recursive] <command> 'git submodule' [--quiet] sync [--] [<path>...] @@ -100,6 +100,9 @@ status:: initialized and `+` if the currently checked out submodule commit does not match the SHA-1 found in the index of the containing repository. This command is the default command for 'git-submodule'. ++ +If '--recursive' is specified, this command will recurse into nested +submodules, and show their status as well. init:: Initialize the submodules, i.e. register each submodule name @@ -122,6 +125,9 @@ update:: If the submodule is not yet initialized, and you just want to use the setting as stored in .gitmodules, you can automatically initialize the submodule with the --init option. ++ +If '--recursive' is specified, this command will recurse into the +registered submodules, and update any nested submodules within. summary:: Show commit summary between the given commit (defaults to HEAD) and @@ -135,12 +141,15 @@ summary:: foreach:: Evaluates an arbitrary shell command in each checked out submodule. - The command has access to the variables $path and $sha1: + The command has access to the variables $name, $path and $sha1: + $name is the name of the relevant submodule section in .gitmodules, $path is the name of the submodule directory relative to the superproject, and $sha1 is the commit as recorded in the superproject. Any submodules defined in the superproject but not checked out are ignored by this command. Unless given --quiet, foreach prints the name of each submodule before evaluating the command. + If --recursive is given, submodules are traversed recursively (i.e. + the given shell command is evaluated in nested submodules as well). A non-zero return from the command in any submodule causes the processing to terminate. This can be overridden by adding '|| :' to the end of the command. @@ -218,6 +227,12 @@ OPTIONS *NOTE*: Do *not* use this option unless you have read the note for linkgit:git-clone[1]'s --reference and --shared options carefully. +--recursive:: + This option is only valid for foreach, update and status commands. + Traverse submodules recursively. The operation is performed not + only in the submodules of the current repo, but also + in any nested submodules inside those submodules (and so on). + <path>...:: Paths to submodule(s). When specified this will restrict the command to only operate on the submodules found at the specified paths. diff --git a/Documentation/git-tag.txt b/Documentation/git-tag.txt index 5113eaec62..299b04f726 100644 --- a/Documentation/git-tag.txt +++ b/Documentation/git-tag.txt @@ -51,6 +51,7 @@ OPTIONS Make a GPG-signed tag, using the given key -f:: +--force:: Replace an existing tag with the given name (instead of failing) -d:: diff --git a/Documentation/git.txt b/Documentation/git.txt index a9bacfbef4..ad44cac71d 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -43,9 +43,10 @@ unreleased) version of git, that is available from 'master' branch of the `git.git` repository. Documentation for older releases are available here: -* link:v1.6.4.1/git.html[documentation for release 1.6.4.1] +* link:v1.6.4.2/git.html[documentation for release 1.6.4.2] * release notes for + link:RelNotes-1.6.4.2.txt[1.6.4.2], link:RelNotes-1.6.4.1.txt[1.6.4.1], link:RelNotes-1.6.4.txt[1.6.4]. |