diff options
Diffstat (limited to 'contrib/completion/git-completion.bash')
-rw-r--r-- | contrib/completion/git-completion.bash | 168 |
1 files changed, 159 insertions, 9 deletions
diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash index 477ef8157a..8c40ade494 100644 --- a/contrib/completion/git-completion.bash +++ b/contrib/completion/git-completion.bash @@ -122,6 +122,38 @@ __git () ${__git_dir:+--git-dir="$__git_dir"} "$@" 2>/dev/null } +# Helper function to read the first line of a file into a variable. +# __git_eread requires 2 arguments, the file path and the name of the +# variable, in that order. +# +# This is taken from git-prompt.sh. +__git_eread () +{ + test -r "$1" && IFS=$'\r\n' read -r "$2" <"$1" +} + +# Runs git in $__git_repo_path to determine whether a pseudoref exists. +# 1: The pseudo-ref to search +__git_pseudoref_exists () +{ + local ref=$1 + + # If the reftable is in use, we have to shell out to 'git rev-parse' + # to determine whether the ref exists instead of looking directly in + # the filesystem to determine whether the ref exists. Otherwise, use + # Bash builtins since executing Git commands are expensive on some + # platforms. + if __git_eread "$__git_repo_path/HEAD" head; then + b="${head#ref: }" + if [ "$b" == "refs/heads/.invalid" ]; then + __git -C "$__git_repo_path" rev-parse --verify --quiet "$ref" 2>/dev/null + return $? + fi + fi + + [ -f "$__git_repo_path/$ref" ] +} + # Removes backslash escaping, single quotes and double quotes from a word, # stores the result in the variable $dequoted_word. # 1: The word to dequote. @@ -1625,7 +1657,7 @@ __git_cherry_pick_inprogress_options=$__git_sequencer_inprogress_options _git_cherry_pick () { __git_find_repo_path - if [ -f "$__git_repo_path"/CHERRY_PICK_HEAD ]; then + if __git_pseudoref_exists CHERRY_PICK_HEAD; then __gitcomp "$__git_cherry_pick_inprogress_options" return fi @@ -2053,7 +2085,7 @@ __git_log_shortlog_options=" " # Options accepted by log and show __git_log_show_options=" - --diff-merges --diff-merges= --no-diff-merges --remerge-diff + --diff-merges --diff-merges= --no-diff-merges --dd --remerge-diff " __git_diff_merges_opts="off none on first-parent 1 separate m combined c dense-combined cc remerge r" @@ -2067,7 +2099,7 @@ _git_log () __git_find_repo_path local merge="" - if [ -f "$__git_repo_path/MERGE_HEAD" ]; then + if __git_pseudoref_exists MERGE_HEAD; then merge="--merge" fi case "$prev,$cur" in @@ -2934,6 +2966,7 @@ _git_reset () _git_restore () { + __git_find_repo_path case "$prev" in -s) __git_complete_refs @@ -2952,7 +2985,7 @@ _git_restore () __gitcomp_builtin restore ;; *) - if __git rev-parse --verify --quiet HEAD >/dev/null; then + if __git_pseudoref_exists HEAD; then __git_complete_index_file "--modified" fi esac @@ -2963,7 +2996,7 @@ __git_revert_inprogress_options=$__git_sequencer_inprogress_options _git_revert () { __git_find_repo_path - if [ -f "$__git_repo_path"/REVERT_HEAD ]; then + if __git_pseudoref_exists REVERT_HEAD; then __gitcomp "$__git_revert_inprogress_options" return fi @@ -3084,12 +3117,119 @@ __gitcomp_directories () COMPREPLY+=("$c/") _found=1 fi - done < <(git ls-tree -z -d --name-only HEAD $_tmp_dir) + done < <(__git ls-tree -z -d --name-only HEAD $_tmp_dir) if [[ $_found == 0 ]] && [[ "$cur" =~ /$ ]]; then # No possible further completions any deeper, so assume we're at # a leaf directory and just consider it complete __gitcomp_direct_append "$cur " + elif [[ $_found == 0 ]]; then + # No possible completions found. Avoid falling back to + # bash's default file and directory completion, because all + # valid completions have already been searched and the + # fallbacks can do nothing but mislead. In fact, they can + # mislead in three different ways: + # 1) Fallback file completion makes no sense when asking + # for directory completions, as this function does. + # 2) Fallback directory completion is bad because + # e.g. "/pro" is invalid and should NOT complete to + # "/proc". + # 3) Fallback file/directory completion only completes + # on paths that exist in the current working tree, + # i.e. which are *already* part of their + # sparse-checkout. Thus, normal file and directory + # completion is always useless for "git + # sparse-checkout add" and is also probelmatic for + # "git sparse-checkout set" unless using it to + # strictly narrow the checkout. + COMPREPLY=( "" ) + fi +} + +# In non-cone mode, the arguments to {set,add} are supposed to be +# patterns, relative to the toplevel directory. These can be any kind +# of general pattern, like 'subdir/*.c' and we can't complete on all +# of those. However, if the user presses Tab to get tab completion, we +# presume that they are trying to provide a pattern that names a specific +# path. +__gitcomp_slash_leading_paths () +{ + local dequoted_word pfx="" cur_ toplevel + + # Since we are dealing with a sparse-checkout, subdirectories may not + # exist in the local working copy. Therefore, we want to run all + # ls-files commands relative to the repository toplevel. + toplevel="$(git rev-parse --show-toplevel)/" + + __git_dequote "$cur" + + # If the paths provided by the user already start with '/', then + # they are considered relative to the toplevel of the repository + # already. If they do not start with /, then we need to adjust + # them to start with the appropriate prefix. + case "$cur" in + /*) + cur="${cur:1}" + ;; + *) + pfx="$(__git rev-parse --show-prefix)" + esac + + # Since sparse-index is limited to cone-mode, in non-cone-mode the + # list of valid paths is precisely the cached files in the index. + # + # NEEDSWORK: + # 1) We probably need to take care of cases where ls-files + # responds with special quoting. + # 2) We probably need to take care of cases where ${cur} has + # some kind of special quoting. + # 3) On top of any quoting from 1 & 2, we have to provide an extra + # level of quoting for any paths that contain a '*', '?', '\', + # '[', ']', or leading '#' or '!' since those will be + # interpreted by sparse-checkout as something other than a + # literal path character. + # Since there are two types of quoting here, this might get really + # complex. For now, just punt on all of this... + completions="$(__git -C "${toplevel}" -c core.quotePath=false \ + ls-files --cached -- "${pfx}${cur}*" \ + | sed -e s%^%/% -e 's%$% %')" + # Note, above, though that we needed all of the completions to be + # prefixed with a '/', and we want to add a space so that bash + # completion will actually complete an entry and let us move on to + # the next one. + + # Return what we've found. + if test -n "$completions"; then + # We found some completions; return them + local IFS=$'\n' + COMPREPLY=($completions) + else + # Do NOT fall back to bash-style all-local-files-and-dirs + # when we find no match. Such options are worse than + # useless: + # 1. "git sparse-checkout add" needs paths that are NOT + # currently in the working copy. "git + # sparse-checkout set" does as well, except in the + # special cases when users are only trying to narrow + # their sparse checkout to a subset of what they + # already have. + # + # 2. A path like '.config' is ambiguous as to whether + # the user wants all '.config' files throughout the + # tree, or just the one under the current directory. + # It would result in a warning from the + # sparse-checkout command due to this. As such, all + # completions of paths should be prefixed with a + # '/'. + # + # 3. We don't want paths prefixed with a '/' to + # complete files in the system root directory, we + # want it to complete on files relative to the + # repository root. + # + # As such, make sure that NO completions are offered rather + # than falling back to bash's default completions. + COMPREPLY=( "" ) fi } @@ -3097,6 +3237,7 @@ _git_sparse_checkout () { local subcommands="list init set disable add reapply" local subcommand="$(__git_find_on_cmdline "$subcommands")" + local using_cone=true if [ -z "$subcommand" ]; then __gitcomp "$subcommands" return @@ -3107,9 +3248,18 @@ _git_sparse_checkout () __gitcomp_builtin sparse-checkout_$subcommand "" "--" ;; set,*|add,*) - if [ "$(__git config core.sparseCheckoutCone)" == "true" ] || - [ -n "$(__git_find_on_cmdline --cone)" ]; then + if [[ "$(__git config core.sparseCheckout)" == "true" && + "$(__git config core.sparseCheckoutCone)" == "false" && + -z "$(__git_find_on_cmdline --cone)" ]]; then + using_cone=false + fi + if [[ -n "$(__git_find_on_cmdline --no-cone)" ]]; then + using_cone=false + fi + if [[ "$using_cone" == "true" ]]; then __gitcomp_directories + else + __gitcomp_slash_leading_paths fi esac } @@ -3592,7 +3742,7 @@ __gitk_main () __git_find_repo_path local merge="" - if [ -f "$__git_repo_path/MERGE_HEAD" ]; then + if __git_pseudoref_exists MERGE_HEAD; then merge="--merge" fi case "$cur" in |