diff options
Diffstat (limited to 't')
64 files changed, 3308 insertions, 283 deletions
diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh index f4ca4fc85c..3ec9cbef2c 100755 --- a/t/t0000-basic.sh +++ b/t/t0000-basic.sh @@ -73,6 +73,27 @@ then exit 1 fi +clean=no +test_expect_success 'tests clean up after themselves' ' + test_when_finished clean=yes +' + +cleaner=no +test_expect_code 1 'tests clean up even after a failure' ' + test_when_finished cleaner=yes && + (exit 1) +' + +if test $clean$cleaner != yesyes +then + say "bug in test framework: cleanup commands do not work reliably" + exit 1 +fi + +test_expect_code 2 'failure to clean up causes the test to fail' ' + test_when_finished "(exit 2)" +' + ################################################################ # Basics of the basics diff --git a/t/t0001-init.sh b/t/t0001-init.sh index 675773479a..7c0a698b92 100755 --- a/t/t0001-init.sh +++ b/t/t0001-init.sh @@ -310,4 +310,18 @@ test_expect_success POSIXPERM 'init notices EPERM' ' ) ' +test_expect_success 'init creates a new bare directory with global --bare' ' + rm -rf newdir && + git --bare init newdir && + test -d newdir/refs +' + +test_expect_success 'init prefers command line to GIT_DIR' ' + rm -rf newdir && + mkdir otherdir && + GIT_DIR=otherdir git --bare init newdir && + test -d newdir/refs && + ! test -d otherdir/refs +' + test_done diff --git a/t/t0003-attributes.sh b/t/t0003-attributes.sh index 1c77192eb3..53bd7fcc4a 100755 --- a/t/t0003-attributes.sh +++ b/t/t0003-attributes.sh @@ -20,8 +20,12 @@ test_expect_success 'setup' ' mkdir -p a/b/d a/c && ( + echo "[attr]notest !test" echo "f test=f" echo "a/i test=a/i" + echo "onoff test -test" + echo "offon -test test" + echo "no notest" ) >.gitattributes && ( echo "g test=a/g" && @@ -30,6 +34,7 @@ test_expect_success 'setup' ' ( echo "h test=a/b/h" && echo "d/* test=a/b/d/*" + echo "d/yes notest" ) >a/b/.gitattributes ' @@ -44,6 +49,11 @@ test_expect_success 'attribute test' ' attr_check b/g unspecified && attr_check a/b/h a/b/h && attr_check a/b/d/g "a/b/d/*" + attr_check onoff unset + attr_check offon set + attr_check no unspecified + attr_check a/b/d/no "a/b/d/*" + attr_check a/b/d/yes unspecified ' @@ -58,6 +68,11 @@ a/b/g: test: a/b/g b/g: test: unspecified a/b/h: test: a/b/h a/b/d/g: test: a/b/d/* +onoff: test: unset +offon: test: set +no: test: unspecified +a/b/d/no: test: a/b/d/* +a/b/d/yes: test: unspecified EOF sed -e "s/:.*//" < expect | git check-attr --stdin test > actual && diff --git a/t/t0050-filesystem.sh b/t/t0050-filesystem.sh index 89282ccf7a..41df6bcf27 100755 --- a/t/t0050-filesystem.sh +++ b/t/t0050-filesystem.sh @@ -108,13 +108,17 @@ $test_case 'merge (case change)' ' ' -$test_case 'add (with different case)' ' + + +test_expect_failure 'add (with different case)' ' git reset --hard initial && rm camelcase && echo 1 >CamelCase && git add CamelCase && - test $(git ls-files | grep -i camelcase | wc -l) = 1 + camel=$(git ls-files | grep -i camelcase) && + test $(echo "$camel" | wc -l) = 1 && + test "z$(git cat-file blob :$camel)" = z1 ' diff --git a/t/t1010-mktree.sh b/t/t1010-mktree.sh index 9956e3ad62..b946f87686 100755 --- a/t/t1010-mktree.sh +++ b/t/t1010-mktree.sh @@ -58,14 +58,12 @@ test_expect_success 'allow missing object with --missing' ' test_cmp tree.missing actual ' -test_expect_failure 'mktree reads ls-tree -r output (1)' ' - git mktree <all >actual && - test_cmp tree actual +test_expect_success 'mktree refuses to read ls-tree -r output (1)' ' + test_must_fail git mktree <all >actual ' -test_expect_failure 'mktree reads ls-tree -r output (2)' ' - git mktree <all.withsub >actual && - test_cmp tree.withsub actual +test_expect_success 'mktree refuses to read ls-tree -r output (2)' ' + test_must_fail git mktree <all.withsub >actual ' test_done diff --git a/t/t1304-default-acl.sh b/t/t1304-default-acl.sh index cc30be4a65..055ad00f77 100755 --- a/t/t1304-default-acl.sh +++ b/t/t1304-default-acl.sh @@ -20,34 +20,23 @@ if ! setfacl -m u:root:rwx .; then test_done fi -modebits () { - ls -l "$1" | sed -e 's|^\(..........\).*|\1|' -} - check_perms_and_acl () { - actual=$(modebits "$1") && - case "$actual" in - -r--r-----*) - : happy - ;; - *) - echo "Got permission '$actual', expected '-r--r-----'" - false - ;; - esac && + test -r "$1" && getfacl "$1" > actual && grep -q "user:root:rwx" actual && grep -q "user:${LOGNAME}:rwx" actual && - grep -q "mask::r--" actual && + egrep "mask::?r--" actual > /dev/null 2>&1 && grep -q "group::---" actual || false } dirs_to_set="./ .git/ .git/objects/ .git/objects/pack/" test_expect_success 'Setup test repo' ' + setfacl -m d:u::rwx,d:g::---,d:o:---,d:m:rwx $dirs_to_set && + setfacl -m m:rwx $dirs_to_set && setfacl -m u:root:rwx $dirs_to_set && - setfacl -d -m u:"$LOGNAME":rwx $dirs_to_set && - setfacl -d -m u:root:rwx $dirs_to_set && + setfacl -m d:u:"$LOGNAME":rwx $dirs_to_set && + setfacl -m d:u:root:rwx $dirs_to_set && touch file.txt && git add file.txt && diff --git a/t/t2017-checkout-orphan.sh b/t/t2017-checkout-orphan.sh new file mode 100755 index 0000000000..a8297c61bd --- /dev/null +++ b/t/t2017-checkout-orphan.sh @@ -0,0 +1,90 @@ +#!/bin/sh +# +# Copyright (c) 2010 Erick Mattos +# + +test_description='git checkout --orphan + +Main Tests for --orphan functionality.' + +. ./test-lib.sh + +TEST_FILE=foo + +test_expect_success 'Setup' ' + echo "Initial" >"$TEST_FILE" && + git add "$TEST_FILE" && + git commit -m "First Commit" + test_tick && + echo "State 1" >>"$TEST_FILE" && + git add "$TEST_FILE" && + test_tick && + git commit -m "Second Commit" +' + +test_expect_success '--orphan creates a new orphan branch from HEAD' ' + git checkout --orphan alpha && + test_must_fail git rev-parse --verify HEAD && + test "refs/heads/alpha" = "$(git symbolic-ref HEAD)" && + test_tick && + git commit -m "Third Commit" && + test_must_fail git rev-parse --verify HEAD^ && + git diff-tree --quiet master alpha +' + +test_expect_success '--orphan creates a new orphan branch from <start_point>' ' + git checkout master && + git checkout --orphan beta master^ && + test_must_fail git rev-parse --verify HEAD && + test "refs/heads/beta" = "$(git symbolic-ref HEAD)" && + test_tick && + git commit -m "Fourth Commit" && + test_must_fail git rev-parse --verify HEAD^ && + git diff-tree --quiet master^ beta +' + +test_expect_success '--orphan must be rejected with -b' ' + git checkout master && + test_must_fail git checkout --orphan new -b newer && + test refs/heads/master = "$(git symbolic-ref HEAD)" +' + +test_expect_success '--orphan is rejected with an existing name' ' + git checkout master && + test_must_fail git checkout --orphan master && + test refs/heads/master = "$(git symbolic-ref HEAD)" +' + +test_expect_success '--orphan refuses to switch if a merge is needed' ' + git checkout master && + git reset --hard && + echo local >>"$TEST_FILE" && + cat "$TEST_FILE" >"$TEST_FILE.saved" && + test_must_fail git checkout --orphan gamma master^ && + test refs/heads/master = "$(git symbolic-ref HEAD)" && + test_cmp "$TEST_FILE" "$TEST_FILE.saved" && + git diff-index --quiet --cached HEAD && + git reset --hard +' + +test_expect_success '--orphan does not mix well with -t' ' + git checkout master && + test_must_fail git checkout -t master --orphan gamma && + test refs/heads/master = "$(git symbolic-ref HEAD)" +' + +test_expect_success '--orphan ignores branch.autosetupmerge' ' + git checkout -f master && + git config branch.autosetupmerge always && + git checkout --orphan delta && + test -z "$(git config branch.delta.merge)" && + test refs/heads/delta = "$(git symbolic-ref HEAD)" && + test_must_fail git rev-parse --verify HEAD^ +' + +test_expect_success '--orphan does not mix well with -l' ' + git checkout -f master && + test_must_fail git checkout -l --orphan gamma +' + +test_done diff --git a/t/t2204-add-ignored.sh b/t/t2204-add-ignored.sh new file mode 100755 index 0000000000..24afdabab7 --- /dev/null +++ b/t/t2204-add-ignored.sh @@ -0,0 +1,79 @@ +#!/bin/sh + +test_description='giving ignored paths to git add' + +. ./test-lib.sh + +test_expect_success setup ' + mkdir sub dir dir/sub && + echo sub >.gitignore && + echo ign >>.gitignore && + for p in . sub dir dir/sub + do + >"$p/ign" && + >"$p/file" || exit 1 + done +' + +for i in file dir/file dir 'd*' +do + test_expect_success "no complaints for unignored $i" ' + rm -f .git/index && + git add "$i" && + git ls-files "$i" >out && + test -s out + ' +done + +for i in ign dir/ign dir/sub dir/sub/*ign sub/file sub sub/* +do + test_expect_success "complaints for ignored $i" ' + rm -f .git/index && + test_must_fail git add "$i" 2>err && + git ls-files "$i" >out && + ! test -s out && + grep -e "Use -f if" err && + cat err + ' + + test_expect_success "complaints for ignored $i with unignored file" ' + rm -f .git/index && + test_must_fail git add "$i" file 2>err && + git ls-files "$i" >out && + ! test -s out && + grep -e "Use -f if" err && + cat err + ' +done + +for i in sub sub/* +do + test_expect_success "complaints for ignored $i in dir" ' + rm -f .git/index && + ( + cd dir && + test_must_fail git add "$i" 2>err && + git ls-files "$i" >out && + ! test -s out && + grep -e "Use -f if" err && + cat err + ) + ' +done + +for i in ign file +do + test_expect_success "complaints for ignored $i in sub" ' + rm -f .git/index && + ( + cd sub && + test_must_fail git add "$i" 2>err && + git ls-files "$i" >out && + ! test -s out && + grep -e "Use -f if" err && + cat err + ) + ' +done + +test_done diff --git a/t/t3020-ls-files-error-unmatch.sh b/t/t3020-ls-files-error-unmatch.sh index f4066cbc09..a7d8187169 100755 --- a/t/t3020-ls-files-error-unmatch.sh +++ b/t/t3020-ls-files-error-unmatch.sh @@ -11,9 +11,11 @@ line. ' . ./test-lib.sh -touch foo bar -git update-index --add foo bar -git commit -m "add foo bar" +test_expect_success 'setup' ' + touch foo bar && + git update-index --add foo bar && + git commit -m "add foo bar" +' test_expect_success \ 'git ls-files --error-unmatch should fail with unmatched path.' \ diff --git a/t/t3301-notes.sh b/t/t3301-notes.sh index 37b96871c5..64f32ad94d 100755 --- a/t/t3301-notes.sh +++ b/t/t3301-notes.sh @@ -55,6 +55,15 @@ test_expect_success 'handle empty notes gracefully' ' git notes show ; test 1 = $? ' +test_expect_success 'show non-existent notes entry with %N' ' + for l in A B + do + echo "$l" + done >expect && + git show -s --format='A%n%NB' >output && + test_cmp expect output +' + test_expect_success 'create notes' ' git config core.notesRef refs/notes/commits && MSG=b4 git notes add && @@ -65,6 +74,24 @@ test_expect_success 'create notes' ' test_must_fail git notes show HEAD^ ' +test_expect_success 'show notes entry with %N' ' + for l in A b4 B + do + echo "$l" + done >expect && + git show -s --format='A%n%NB' >output && + test_cmp expect output +' + +cat >expect <<EOF +d423f8c refs/notes/commits@{0}: notes: Notes added by 'git notes add' +EOF + +test_expect_success 'create reflog entry' ' + git reflog show refs/notes/commits >output && + test_cmp expect output +' + test_expect_success 'edit existing notes' ' MSG=b3 git notes edit && test ! -f .git/NOTES_EDITMSG && @@ -378,6 +405,17 @@ test_expect_success 'append to existing note with "git notes append"' ' test_cmp expect output ' +cat > expect_list << EOF +c18dc024e14f08d18d14eea0d747ff692d66d6a3 1584215f1d29c65e99c6c6848626553fdd07fd75 +c9c6af7f78bc47490dbf3e822cf2f3c24d4b9061 268048bfb8a1fb38e703baceb8ab235421bf80c5 +4b6ad22357cc8a1296720574b8d2fbc22fab0671 bd1753200303d0a0344be813e504253b3d98e74d +EOF + +test_expect_success '"git notes list" does not expand to "git notes list HEAD"' ' + git notes list > output && + test_cmp expect_list output +' + test_expect_success 'appending empty string does not change existing note' ' git notes append -m "" && git notes show > output && @@ -416,7 +454,7 @@ Date: Thu Apr 7 15:18:13 2005 -0700 6th -Notes: +Notes (other): other note EOF @@ -449,7 +487,139 @@ test_expect_success 'Do not show note when core.notesRef is overridden' ' test_cmp expect-not-other output ' +cat > expect-both << EOF +commit 387a89921c73d7ed72cd94d179c1c7048ca47756 +Author: A U Thor <author@example.com> +Date: Thu Apr 7 15:18:13 2005 -0700 + + 6th + +Notes: + order test + +Notes (other): + other note + +commit bd1753200303d0a0344be813e504253b3d98e74d +Author: A U Thor <author@example.com> +Date: Thu Apr 7 15:17:13 2005 -0700 + + 5th + +Notes: + replacement for deleted note +EOF + +test_expect_success 'Show all notes when notes.displayRef=refs/notes/*' ' + GIT_NOTES_REF=refs/notes/commits git notes add \ + -m"replacement for deleted note" HEAD^ && + GIT_NOTES_REF=refs/notes/commits git notes add -m"order test" && + git config --unset core.notesRef && + git config notes.displayRef "refs/notes/*" && + git log -2 > output && + test_cmp expect-both output +' + +test_expect_success 'core.notesRef is implicitly in notes.displayRef' ' + git config core.notesRef refs/notes/commits && + git config notes.displayRef refs/notes/other && + git log -2 > output && + test_cmp expect-both output +' + +test_expect_success 'notes.displayRef can be given more than once' ' + git config --unset core.notesRef && + git config notes.displayRef refs/notes/commits && + git config --add notes.displayRef refs/notes/other && + git log -2 > output && + test_cmp expect-both output +' + +cat > expect-both-reversed << EOF +commit 387a89921c73d7ed72cd94d179c1c7048ca47756 +Author: A U Thor <author@example.com> +Date: Thu Apr 7 15:18:13 2005 -0700 + + 6th + +Notes (other): + other note + +Notes: + order test +EOF + +test_expect_success 'notes.displayRef respects order' ' + git config core.notesRef refs/notes/other && + git config --unset-all notes.displayRef && + git config notes.displayRef refs/notes/commits && + git log -1 > output && + test_cmp expect-both-reversed output +' + +test_expect_success 'GIT_NOTES_DISPLAY_REF works' ' + git config --unset-all core.notesRef && + git config --unset-all notes.displayRef && + GIT_NOTES_DISPLAY_REF=refs/notes/commits:refs/notes/other \ + git log -2 > output && + test_cmp expect-both output +' + +cat > expect-none << EOF +commit 387a89921c73d7ed72cd94d179c1c7048ca47756 +Author: A U Thor <author@example.com> +Date: Thu Apr 7 15:18:13 2005 -0700 + + 6th + +commit bd1753200303d0a0344be813e504253b3d98e74d +Author: A U Thor <author@example.com> +Date: Thu Apr 7 15:17:13 2005 -0700 + + 5th +EOF + +test_expect_success 'GIT_NOTES_DISPLAY_REF overrides config' ' + git config notes.displayRef "refs/notes/*" && + GIT_NOTES_REF= GIT_NOTES_DISPLAY_REF= git log -2 > output && + test_cmp expect-none output +' + +test_expect_success '--show-notes=* adds to GIT_NOTES_DISPLAY_REF' ' + GIT_NOTES_REF= GIT_NOTES_DISPLAY_REF= git log --show-notes=* -2 > output && + test_cmp expect-both output +' + +cat > expect-commits << EOF +commit 387a89921c73d7ed72cd94d179c1c7048ca47756 +Author: A U Thor <author@example.com> +Date: Thu Apr 7 15:18:13 2005 -0700 + + 6th + +Notes: + order test +EOF + +test_expect_success '--no-standard-notes' ' + git log --no-standard-notes --show-notes=commits -1 > output && + test_cmp expect-commits output +' + +test_expect_success '--standard-notes' ' + git log --no-standard-notes --show-notes=commits \ + --standard-notes -2 > output && + test_cmp expect-both output +' + +test_expect_success '--show-notes=ref accumulates' ' + git log --show-notes=other --show-notes=commits \ + --no-standard-notes -1 > output && + test_cmp expect-both-reversed output +' + test_expect_success 'Allow notes on non-commits (trees, blobs, tags)' ' + git config core.notesRef refs/notes/other && echo "Note on a tree" > expect git notes add -m "Note on a tree" HEAD: && git notes show HEAD: > actual && @@ -473,7 +643,7 @@ Date: Thu Apr 7 15:19:13 2005 -0700 7th -Notes: +Notes (other): other note EOF @@ -504,7 +674,7 @@ Date: Thu Apr 7 15:21:13 2005 -0700 9th -Notes: +Notes (other): yet another note EOF @@ -534,7 +704,7 @@ Date: Thu Apr 7 15:21:13 2005 -0700 9th -Notes: +Notes (other): yet another note $whitespace yet another note @@ -553,7 +723,7 @@ Date: Thu Apr 7 15:22:13 2005 -0700 10th -Notes: +Notes (other): other note EOF @@ -570,7 +740,7 @@ Date: Thu Apr 7 15:22:13 2005 -0700 10th -Notes: +Notes (other): other note $whitespace yet another note @@ -589,7 +759,7 @@ Date: Thu Apr 7 15:23:13 2005 -0700 11th -Notes: +Notes (other): other note $whitespace yet another note @@ -620,7 +790,7 @@ Date: Thu Apr 7 15:23:13 2005 -0700 11th -Notes: +Notes (other): yet another note $whitespace yet another note @@ -645,4 +815,233 @@ test_expect_success 'cannot copy note from object without notes' ' test_must_fail git notes copy HEAD^ HEAD ' +cat > expect << EOF +commit e5d4fb5698d564ab8c73551538ecaf2b0c666185 +Author: A U Thor <author@example.com> +Date: Thu Apr 7 15:25:13 2005 -0700 + + 13th + +Notes (other): + yet another note +$whitespace + yet another note + +commit 7038787dfe22a14c3867ce816dbba39845359719 +Author: A U Thor <author@example.com> +Date: Thu Apr 7 15:24:13 2005 -0700 + + 12th + +Notes (other): + other note +$whitespace + yet another note +EOF + +test_expect_success 'git notes copy --stdin' ' + (echo $(git rev-parse HEAD~3) $(git rev-parse HEAD^); \ + echo $(git rev-parse HEAD~2) $(git rev-parse HEAD)) | + git notes copy --stdin && + git log -2 > output && + test_cmp expect output && + test "$(git notes list HEAD)" = "$(git notes list HEAD~2)" && + test "$(git notes list HEAD^)" = "$(git notes list HEAD~3)" +' + +cat > expect << EOF +commit 37a0d4cba38afef96ba54a3ea567e6dac575700b +Author: A U Thor <author@example.com> +Date: Thu Apr 7 15:27:13 2005 -0700 + + 15th + +commit be28d8b4d9951ad940d229ee3b0b9ee3b1ec273d +Author: A U Thor <author@example.com> +Date: Thu Apr 7 15:26:13 2005 -0700 + + 14th +EOF + +test_expect_success 'git notes copy --for-rewrite (unconfigured)' ' + test_commit 14th && + test_commit 15th && + (echo $(git rev-parse HEAD~3) $(git rev-parse HEAD^); \ + echo $(git rev-parse HEAD~2) $(git rev-parse HEAD)) | + git notes copy --for-rewrite=foo && + git log -2 > output && + test_cmp expect output +' + +cat > expect << EOF +commit 37a0d4cba38afef96ba54a3ea567e6dac575700b +Author: A U Thor <author@example.com> +Date: Thu Apr 7 15:27:13 2005 -0700 + + 15th + +Notes (other): + yet another note +$whitespace + yet another note + +commit be28d8b4d9951ad940d229ee3b0b9ee3b1ec273d +Author: A U Thor <author@example.com> +Date: Thu Apr 7 15:26:13 2005 -0700 + + 14th + +Notes (other): + other note +$whitespace + yet another note +EOF + +test_expect_success 'git notes copy --for-rewrite (enabled)' ' + git config notes.rewriteMode overwrite && + git config notes.rewriteRef "refs/notes/*" && + (echo $(git rev-parse HEAD~3) $(git rev-parse HEAD^); \ + echo $(git rev-parse HEAD~2) $(git rev-parse HEAD)) | + git notes copy --for-rewrite=foo && + git log -2 > output && + test_cmp expect output +' + +test_expect_success 'git notes copy --for-rewrite (disabled)' ' + git config notes.rewrite.bar false && + echo $(git rev-parse HEAD~3) $(git rev-parse HEAD) | + git notes copy --for-rewrite=bar && + git log -2 > output && + test_cmp expect output +' + +cat > expect << EOF +commit 37a0d4cba38afef96ba54a3ea567e6dac575700b +Author: A U Thor <author@example.com> +Date: Thu Apr 7 15:27:13 2005 -0700 + + 15th + +Notes (other): + a fresh note +EOF + +test_expect_success 'git notes copy --for-rewrite (overwrite)' ' + git notes add -f -m"a fresh note" HEAD^ && + echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | + git notes copy --for-rewrite=foo && + git log -1 > output && + test_cmp expect output +' + +test_expect_success 'git notes copy --for-rewrite (ignore)' ' + git config notes.rewriteMode ignore && + echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | + git notes copy --for-rewrite=foo && + git log -1 > output && + test_cmp expect output +' + +cat > expect << EOF +commit 37a0d4cba38afef96ba54a3ea567e6dac575700b +Author: A U Thor <author@example.com> +Date: Thu Apr 7 15:27:13 2005 -0700 + + 15th + +Notes (other): + a fresh note + another fresh note +EOF + +test_expect_success 'git notes copy --for-rewrite (append)' ' + git notes add -f -m"another fresh note" HEAD^ && + git config notes.rewriteMode concatenate && + echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | + git notes copy --for-rewrite=foo && + git log -1 > output && + test_cmp expect output +' + +cat > expect << EOF +commit 37a0d4cba38afef96ba54a3ea567e6dac575700b +Author: A U Thor <author@example.com> +Date: Thu Apr 7 15:27:13 2005 -0700 + + 15th + +Notes (other): + a fresh note + another fresh note + append 1 + append 2 +EOF + +test_expect_success 'git notes copy --for-rewrite (append two to one)' ' + git notes add -f -m"append 1" HEAD^ && + git notes add -f -m"append 2" HEAD^^ && + (echo $(git rev-parse HEAD^) $(git rev-parse HEAD); + echo $(git rev-parse HEAD^^) $(git rev-parse HEAD)) | + git notes copy --for-rewrite=foo && + git log -1 > output && + test_cmp expect output +' + +test_expect_success 'git notes copy --for-rewrite (append empty)' ' + git notes remove HEAD^ && + echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | + git notes copy --for-rewrite=foo && + git log -1 > output && + test_cmp expect output +' + +cat > expect << EOF +commit 37a0d4cba38afef96ba54a3ea567e6dac575700b +Author: A U Thor <author@example.com> +Date: Thu Apr 7 15:27:13 2005 -0700 + + 15th + +Notes (other): + replacement note 1 +EOF + +test_expect_success 'GIT_NOTES_REWRITE_MODE works' ' + git notes add -f -m"replacement note 1" HEAD^ && + echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | + GIT_NOTES_REWRITE_MODE=overwrite git notes copy --for-rewrite=foo && + git log -1 > output && + test_cmp expect output +' + +cat > expect << EOF +commit 37a0d4cba38afef96ba54a3ea567e6dac575700b +Author: A U Thor <author@example.com> +Date: Thu Apr 7 15:27:13 2005 -0700 + + 15th + +Notes (other): + replacement note 2 +EOF + +test_expect_success 'GIT_NOTES_REWRITE_REF works' ' + git config notes.rewriteMode overwrite && + git notes add -f -m"replacement note 2" HEAD^ && + git config --unset-all notes.rewriteRef && + echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | + GIT_NOTES_REWRITE_REF=refs/notes/commits:refs/notes/other \ + git notes copy --for-rewrite=foo && + git log -1 > output && + test_cmp expect output +' + +test_expect_success 'GIT_NOTES_REWRITE_REF overrides config' ' + git config notes.rewriteRef refs/notes/other && + git notes add -f -m"replacement note 3" HEAD^ && + echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | + GIT_NOTES_REWRITE_REF= git notes copy --for-rewrite=foo && + git log -1 > output && + test_cmp expect output +' test_done diff --git a/t/t3400-rebase.sh b/t/t3400-rebase.sh index 4314ad2d66..dbf7dfba9b 100755 --- a/t/t3400-rebase.sh +++ b/t/t3400-rebase.sh @@ -151,4 +151,21 @@ test_expect_success 'Rebase a commit that sprinkles CRs in' ' git diff --exit-code file-with-cr:CR HEAD:CR ' +test_expect_success 'rebase can copy notes' ' + git config notes.rewrite.rebase true && + git config notes.rewriteRef "refs/notes/*" && + test_commit n1 && + test_commit n2 && + test_commit n3 && + git notes add -m"a note" n3 && + git rebase --onto n1 n2 && + test "a note" = "$(git notes show HEAD)" +' + +test_expect_success 'rebase -m can copy notes' ' + git reset --hard n3 && + git rebase -m --onto n1 n2 && + test "a note" = "$(git notes show HEAD)" +' + test_done diff --git a/t/t3404-rebase-interactive.sh b/t/t3404-rebase-interactive.sh index 4e3513709e..f20ea38411 100755 --- a/t/t3404-rebase-interactive.sh +++ b/t/t3404-rebase-interactive.sh @@ -22,12 +22,18 @@ set_fake_editor # | \ # | F - G - H (branch1) # | \ -# \ I (branch2) -# \ -# J - K - L - M (no-conflict-branch) +# |\ I (branch2) +# | \ +# | J - K - L - M (no-conflict-branch) +# \ +# N - O - P (no-ff-branch) # # where A, B, D and G all touch file1, and one, two, three, four all # touch file "conflict". +# +# WARNING: Modifications to the initial repository can change the SHA ID used +# in the expect2 file for the 'stop on conflicting pick' test. + test_expect_success 'setup' ' test_commit A file1 && @@ -50,6 +56,11 @@ test_expect_success 'setup' ' for n in J K L M do test_commit $n file$n + done && + git checkout -b no-ff-branch A && + for n in N O P + do + test_commit $n file$n done ' @@ -113,7 +124,7 @@ cat > expect2 << EOF D ======= G ->>>>>>> 51047de... G +>>>>>>> 5d18e54... G EOF test_expect_success 'stop on conflicting pick' ' @@ -553,4 +564,54 @@ test_expect_success 'reword' ' git show HEAD~2 | grep "C changed" ' +test_expect_success 'rebase -i can copy notes' ' + git config notes.rewrite.rebase true && + git config notes.rewriteRef "refs/notes/*" && + test_commit n1 && + test_commit n2 && + test_commit n3 && + git notes add -m"a note" n3 && + git rebase --onto n1 n2 && + test "a note" = "$(git notes show HEAD)" +' + +cat >expect <<EOF +an earlier note +a note +EOF + +test_expect_success 'rebase -i can copy notes over a fixup' ' + git reset --hard n3 && + git notes add -m"an earlier note" n2 && + GIT_NOTES_REWRITE_MODE=concatenate FAKE_LINES="1 fixup 2" git rebase -i n1 && + git notes show > output && + test_cmp expect output +' + +test_expect_success 'rebase while detaching HEAD' ' + git symbolic-ref HEAD && + grandparent=$(git rev-parse HEAD~2) && + test_tick && + FAKE_LINES="2 1" git rebase -i HEAD~2 HEAD^0 && + test $grandparent = $(git rev-parse HEAD~2) && + test_must_fail git symbolic-ref HEAD +' + +test_tick # Ensure that the rebased commits get a different timestamp. +test_expect_success 'always cherry-pick with --no-ff' ' + git checkout no-ff-branch && + git tag original-no-ff-branch && + git rebase -i --no-ff A && + touch empty && + for p in 0 1 2 + do + test ! $(git rev-parse HEAD~$p) = $(git rev-parse original-no-ff-branch~$p) && + git diff HEAD~$p original-no-ff-branch~$p > out && + test_cmp empty out + done && + test $(git rev-parse HEAD~3) = $(git rev-parse original-no-ff-branch~3) && + git diff HEAD~3 original-no-ff-branch~3 > out && + test_cmp empty out +' + test_done diff --git a/t/t3417-rebase-whitespace-fix.sh b/t/t3417-rebase-whitespace-fix.sh new file mode 100755 index 0000000000..220a740ee8 --- /dev/null +++ b/t/t3417-rebase-whitespace-fix.sh @@ -0,0 +1,126 @@ +#!/bin/sh + +test_description='git rebase --whitespace=fix + +This test runs git rebase --whitespace=fix and make sure that it works. +' + +. ./test-lib.sh + +# prepare initial revision of "file" with a blank line at the end +cat >file <<EOF +a +b +c + +EOF + +# expected contents in "file" after rebase +cat >expect-first <<EOF +a +b +c +EOF + +# prepare second revision of "file" +cat >second <<EOF +a +b +c + +d +e +f + + + + +EOF + +# expected contents in second revision after rebase +cat >expect-second <<EOF +a +b +c + +d +e +f +EOF + +test_expect_success 'blank line at end of file; extend at end of file' ' + git commit --allow-empty -m "Initial empty commit" && + git add file && git commit -m first && + mv second file && + git add file && git commit -m second && + git rebase --whitespace=fix HEAD^^ && + git diff --exit-code HEAD^:file expect-first && + test_cmp file expect-second +' + +# prepare third revision of "file" +sed -e's/Z//' >third <<EOF +a +b +c + +d +e +f + Z + Z +h +i +j +k +l +EOF + +sed -e's/ //g' <third >expect-third + +test_expect_success 'two blanks line at end of file; extend at end of file' ' + cp third file && git add file && git commit -m third && + git rebase --whitespace=fix HEAD^^ && + git diff --exit-code HEAD^:file expect-second && + test_cmp file expect-third +' + +test_expect_success 'same, but do not remove trailing spaces' ' + git config core.whitespace "-blank-at-eol" && + git reset --hard HEAD^ && + cp third file && git add file && git commit -m third && + git rebase --whitespace=fix HEAD^^ + git diff --exit-code HEAD^:file expect-second && + test_cmp file third +' + +sed -e's/Z//' >beginning <<EOF +a + Z + Z +EOF + +cat >expect-beginning <<EOF +a + + +1 +2 +3 +4 +5 +EOF + +test_expect_success 'at beginning of file' ' + git config core.whitespace "blank-at-eol" && + cp beginning file && + git commit -m beginning file && + for i in 1 2 3 4 5; do + echo $i + done >> file && + git commit -m more file && + git rebase --whitespace=fix HEAD^^ && + test_cmp file expect-beginning +' + +test_done diff --git a/t/t3500-cherry.sh b/t/t3500-cherry.sh index dadbbc2a9f..f038f34b7c 100755 --- a/t/t3500-cherry.sh +++ b/t/t3500-cherry.sh @@ -17,17 +17,19 @@ test_expect_success \ 'prepare repository with topic branch, and check cherry finds the 2 patches from there' \ 'echo First > A && git update-index --add A && + test_tick && git commit -m "Add A." && git checkout -b my-topic-branch && echo Second > B && git update-index --add B && + test_tick && git commit -m "Add B." && - sleep 2 && echo AnotherSecond > C && git update-index --add C && + test_tick && git commit -m "Add C." && git checkout -f master && @@ -35,6 +37,7 @@ test_expect_success \ echo Third >> A && git update-index A && + test_tick && git commit -m "Modify A." && expr "$(echo $(git cherry master my-topic-branch) )" : "+ [^ ]* + .*" diff --git a/t/t3506-cherry-pick-ff.sh b/t/t3506-cherry-pick-ff.sh new file mode 100755 index 0000000000..e17ae712b1 --- /dev/null +++ b/t/t3506-cherry-pick-ff.sh @@ -0,0 +1,98 @@ +#!/bin/sh + +test_description='test cherry-picking with --ff option' + +. ./test-lib.sh + +test_expect_success setup ' + echo first > file1 && + git add file1 && + test_tick && + git commit -m "first" && + git tag first && + + git checkout -b other && + echo second >> file1 && + git add file1 && + test_tick && + git commit -m "second" && + git tag second +' + +test_expect_success 'cherry-pick using --ff fast forwards' ' + git checkout master && + git reset --hard first && + test_tick && + git cherry-pick --ff second && + test "$(git rev-parse --verify HEAD)" = "$(git rev-parse --verify second)" +' + +test_expect_success 'cherry-pick not using --ff does not fast forwards' ' + git checkout master && + git reset --hard first && + test_tick && + git cherry-pick second && + test "$(git rev-parse --verify HEAD)" != "$(git rev-parse --verify second)" +' + +# +# We setup the following graph: +# +# B---C +# / / +# first---A +# +# (This has been taken from t3502-cherry-pick-merge.sh) +# +test_expect_success 'merge setup' ' + git checkout master && + git reset --hard first && + echo new line >A && + git add A && + test_tick && + git commit -m "add line to A" A && + git tag A && + git checkout -b side first && + echo new line >B && + git add B && + test_tick && + git commit -m "add line to B" B && + git tag B && + git checkout master && + git merge side && + git tag C && + git checkout -b new A +' + +test_expect_success 'cherry-pick a non-merge with --ff and -m should fail' ' + git reset --hard A -- && + test_must_fail git cherry-pick --ff -m 1 B && + git diff --exit-code A -- +' + +test_expect_success 'cherry pick a merge with --ff but without -m should fail' ' + git reset --hard A -- && + test_must_fail git cherry-pick --ff C && + git diff --exit-code A -- +' + +test_expect_success 'cherry pick with --ff a merge (1)' ' + git reset --hard A -- && + git cherry-pick --ff -m 1 C && + git diff --exit-code C && + test "$(git rev-parse --verify HEAD)" = "$(git rev-parse --verify C)" +' + +test_expect_success 'cherry pick with --ff a merge (2)' ' + git reset --hard B -- && + git cherry-pick --ff -m 2 C && + git diff --exit-code C && + test "$(git rev-parse --verify HEAD)" = "$(git rev-parse --verify C)" +' + +test_expect_success 'cherry pick a merge relative to nonexistent parent with --ff should fail' ' + git reset --hard B -- && + test_must_fail git cherry-pick --ff -m 3 C +' + +test_done diff --git a/t/t3507-cherry-pick-conflict.sh b/t/t3507-cherry-pick-conflict.sh new file mode 100755 index 0000000000..e25cf8039a --- /dev/null +++ b/t/t3507-cherry-pick-conflict.sh @@ -0,0 +1,198 @@ +#!/bin/sh + +test_description='test cherry-pick and revert with conflicts + + - + + picked: rewrites foo to c + + base: rewrites foo to b + + initial: writes foo as a, unrelated as unrelated + +' + +. ./test-lib.sh + +test_expect_success setup ' + + echo unrelated >unrelated && + git add unrelated && + test_commit initial foo a && + test_commit base foo b && + test_commit picked foo c && + git config advice.detachedhead false + +' + +test_expect_success 'failed cherry-pick does not advance HEAD' ' + + git checkout -f initial^0 && + git read-tree -u --reset HEAD && + git clean -d -f -f -q -x && + + git update-index --refresh && + git diff-index --exit-code HEAD && + + head=$(git rev-parse HEAD) && + test_must_fail git cherry-pick picked && + newhead=$(git rev-parse HEAD) && + + test "$head" = "$newhead" +' + +test_expect_success 'failed cherry-pick produces dirty index' ' + + git checkout -f initial^0 && + git read-tree -u --reset HEAD && + git clean -d -f -f -q -x && + + git update-index --refresh && + git diff-index --exit-code HEAD && + + test_must_fail git cherry-pick picked && + + test_must_fail git update-index --refresh -q && + test_must_fail git diff-index --exit-code HEAD +' + +test_expect_success 'failed cherry-pick registers participants in index' ' + + git read-tree -u --reset HEAD && + git clean -d -f -f -q -x && + { + git checkout base -- foo && + git ls-files --stage foo && + git checkout initial -- foo && + git ls-files --stage foo && + git checkout picked -- foo && + git ls-files --stage foo + } > stages && + sed " + 1 s/ 0 / 1 / + 2 s/ 0 / 2 / + 3 s/ 0 / 3 / + " < stages > expected && + git checkout -f initial^0 && + + git update-index --refresh && + git diff-index --exit-code HEAD && + + test_must_fail git cherry-pick picked && + git ls-files --stage --unmerged > actual && + + test_cmp expected actual +' + +test_expect_success 'failed cherry-pick describes conflict in work tree' ' + + git checkout -f initial^0 && + git read-tree -u --reset HEAD && + git clean -d -f -f -q -x && + cat <<-EOF > expected && + <<<<<<< HEAD + a + ======= + c + >>>>>>> objid picked + EOF + + git update-index --refresh && + git diff-index --exit-code HEAD && + + test_must_fail git cherry-pick picked && + + sed "s/[a-f0-9]*\.\.\./objid/" foo > actual && + test_cmp expected actual +' + +test_expect_success 'diff3 -m style' ' + + git config merge.conflictstyle diff3 && + git checkout -f initial^0 && + git read-tree -u --reset HEAD && + git clean -d -f -f -q -x && + cat <<-EOF > expected && + <<<<<<< HEAD + a + ||||||| parent of objid picked + b + ======= + c + >>>>>>> objid picked + EOF + + git update-index --refresh && + git diff-index --exit-code HEAD && + + test_must_fail git cherry-pick picked && + + sed "s/[a-f0-9]*\.\.\./objid/" foo > actual && + test_cmp expected actual +' + +test_expect_success 'revert also handles conflicts sanely' ' + + git config --unset merge.conflictstyle && + git read-tree -u --reset HEAD && + git clean -d -f -f -q -x && + cat <<-EOF > expected && + <<<<<<< HEAD + a + ======= + b + >>>>>>> parent of objid picked + EOF + { + git checkout picked -- foo && + git ls-files --stage foo && + git checkout initial -- foo && + git ls-files --stage foo && + git checkout base -- foo && + git ls-files --stage foo + } > stages && + sed " + 1 s/ 0 / 1 / + 2 s/ 0 / 2 / + 3 s/ 0 / 3 / + " < stages > expected-stages && + git checkout -f initial^0 && + + git update-index --refresh && + git diff-index --exit-code HEAD && + + head=$(git rev-parse HEAD) && + test_must_fail git revert picked && + newhead=$(git rev-parse HEAD) && + git ls-files --stage --unmerged > actual-stages && + + test "$head" = "$newhead" && + test_must_fail git update-index --refresh -q && + test_must_fail git diff-index --exit-code HEAD && + test_cmp expected-stages actual-stages && + sed "s/[a-f0-9]*\.\.\./objid/" foo > actual && + test_cmp expected actual +' + +test_expect_success 'revert conflict, diff3 -m style' ' + git config merge.conflictstyle diff3 && + git checkout -f initial^0 && + git read-tree -u --reset HEAD && + git clean -d -f -f -q -x && + cat <<-EOF > expected && + <<<<<<< HEAD + a + ||||||| objid picked + c + ======= + b + >>>>>>> parent of objid picked + EOF + + git update-index --refresh && + git diff-index --exit-code HEAD && + + test_must_fail git revert picked && + + sed "s/[a-f0-9]*\.\.\./objid/" foo > actual && + test_cmp expected actual +' + +test_done diff --git a/t/t3800-mktag.sh b/t/t3800-mktag.sh index 6fb027ba57..8eb47942e2 100755 --- a/t/t3800-mktag.sh +++ b/t/t3800-mktag.sh @@ -22,10 +22,12 @@ check_verify_failure () { ########################################################### # first create a commit, so we have a valid object/type # for the tag. -echo Hello >A -git update-index --add A -git commit -m "Initial commit" -head=$(git rev-parse --verify HEAD) +test_expect_success 'setup' ' + echo Hello >A && + git update-index --add A && + git commit -m "Initial commit" && + head=$(git rev-parse --verify HEAD) +' ############################################################ # 1. length check diff --git a/t/t4011-diff-symlink.sh b/t/t4011-diff-symlink.sh index d7e327cc5b..e12fbea1b5 100755 --- a/t/t4011-diff-symlink.sh +++ b/t/t4011-diff-symlink.sh @@ -54,7 +54,7 @@ EOF test_expect_success \ 'diff removed symlink' \ - 'rm frotz && + 'mv frotz frotz2 && git diff-index -M -p $tree > current && compare_diff_patch current expected' @@ -64,8 +64,7 @@ EOF test_expect_success \ 'diff identical, but newly created symlink' \ - 'sleep 3 && - ln -s xyzzy frotz && + 'ln -s xyzzy frotz && git diff-index -M -p $tree > current && compare_diff_patch current expected' diff --git a/t/t4013-diff-various.sh b/t/t4013-diff-various.sh index 8e3694ed5b..dae6358516 100755 --- a/t/t4013-diff-various.sh +++ b/t/t4013-diff-various.sh @@ -204,6 +204,9 @@ log --root --patch-with-stat --summary master log --root -c --patch-with-stat --summary master # improved by Timo's patch log --root --cc --patch-with-stat --summary master +log -p --first-parent master +log -m -p --first-parent master +log -m -p master log -SF master log -SF -p master log --decorate --all @@ -235,6 +238,9 @@ show initial show --root initial show side show master +show -c master +show -m master +show --first-parent master show --stat side show --stat --summary side show --patch-with-stat side diff --git a/t/t4013/diff.log_-m_-p_--first-parent_master b/t/t4013/diff.log_-m_-p_--first-parent_master new file mode 100644 index 0000000000..7a0073f529 --- /dev/null +++ b/t/t4013/diff.log_-m_-p_--first-parent_master @@ -0,0 +1,100 @@ +$ git log -m -p --first-parent master +commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 +Merge: 9a6d494 c7a2ab9 +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:04:00 2006 +0000 + + Merge branch 'side' + +diff --git a/dir/sub b/dir/sub +index cead32e..992913c 100644 +--- a/dir/sub ++++ b/dir/sub +@@ -4,3 +4,5 @@ C + D + E + F ++1 ++2 +diff --git a/file0 b/file0 +index b414108..10a8a9f 100644 +--- a/file0 ++++ b/file0 +@@ -4,3 +4,6 @@ + 4 + 5 + 6 ++A ++B ++C + +commit 9a6d4949b6b76956d9d5e26f2791ec2ceff5fdc0 +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:02:00 2006 +0000 + + Third + +diff --git a/dir/sub b/dir/sub +index 8422d40..cead32e 100644 +--- a/dir/sub ++++ b/dir/sub +@@ -2,3 +2,5 @@ A + B + C + D ++E ++F +diff --git a/file1 b/file1 +new file mode 100644 +index 0000000..b1e6722 +--- /dev/null ++++ b/file1 +@@ -0,0 +1,3 @@ ++A ++B ++C + +commit 1bde4ae5f36c8d9abe3a0fce0c6aab3c4a12fe44 +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:01:00 2006 +0000 + + Second + + This is the second commit. + +diff --git a/dir/sub b/dir/sub +index 35d242b..8422d40 100644 +--- a/dir/sub ++++ b/dir/sub +@@ -1,2 +1,4 @@ + A + B ++C ++D +diff --git a/file0 b/file0 +index 01e79c3..b414108 100644 +--- a/file0 ++++ b/file0 +@@ -1,3 +1,6 @@ + 1 + 2 + 3 ++4 ++5 ++6 +diff --git a/file2 b/file2 +deleted file mode 100644 +index 01e79c3..0000000 +--- a/file2 ++++ /dev/null +@@ -1,3 +0,0 @@ +-1 +-2 +-3 + +commit 444ac553ac7612cc88969031b02b3767fb8a353a +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:00:00 2006 +0000 + + Initial +$ diff --git a/t/t4013/diff.log_-m_-p_master b/t/t4013/diff.log_-m_-p_master new file mode 100644 index 0000000000..9ca62a01ed --- /dev/null +++ b/t/t4013/diff.log_-m_-p_master @@ -0,0 +1,200 @@ +$ git log -m -p master +commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 (from 9a6d4949b6b76956d9d5e26f2791ec2ceff5fdc0) +Merge: 9a6d494 c7a2ab9 +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:04:00 2006 +0000 + + Merge branch 'side' + +diff --git a/dir/sub b/dir/sub +index cead32e..992913c 100644 +--- a/dir/sub ++++ b/dir/sub +@@ -4,3 +4,5 @@ C + D + E + F ++1 ++2 +diff --git a/file0 b/file0 +index b414108..10a8a9f 100644 +--- a/file0 ++++ b/file0 +@@ -4,3 +4,6 @@ + 4 + 5 + 6 ++A ++B ++C + +commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 (from c7a2ab9e8eac7b117442a607d5a9b3950ae34d5a) +Merge: 9a6d494 c7a2ab9 +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:04:00 2006 +0000 + + Merge branch 'side' + +diff --git a/dir/sub b/dir/sub +index 7289e35..992913c 100644 +--- a/dir/sub ++++ b/dir/sub +@@ -1,4 +1,8 @@ + A + B ++C ++D ++E ++F + 1 + 2 +diff --git a/file0 b/file0 +index f4615da..10a8a9f 100644 +--- a/file0 ++++ b/file0 +@@ -1,6 +1,9 @@ + 1 + 2 + 3 ++4 ++5 ++6 + A + B + C +diff --git a/file1 b/file1 +new file mode 100644 +index 0000000..b1e6722 +--- /dev/null ++++ b/file1 +@@ -0,0 +1,3 @@ ++A ++B ++C +diff --git a/file2 b/file2 +deleted file mode 100644 +index 01e79c3..0000000 +--- a/file2 ++++ /dev/null +@@ -1,3 +0,0 @@ +-1 +-2 +-3 +diff --git a/file3 b/file3 +deleted file mode 100644 +index 7289e35..0000000 +--- a/file3 ++++ /dev/null +@@ -1,4 +0,0 @@ +-A +-B +-1 +-2 + +commit c7a2ab9e8eac7b117442a607d5a9b3950ae34d5a +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:03:00 2006 +0000 + + Side + +diff --git a/dir/sub b/dir/sub +index 35d242b..7289e35 100644 +--- a/dir/sub ++++ b/dir/sub +@@ -1,2 +1,4 @@ + A + B ++1 ++2 +diff --git a/file0 b/file0 +index 01e79c3..f4615da 100644 +--- a/file0 ++++ b/file0 +@@ -1,3 +1,6 @@ + 1 + 2 + 3 ++A ++B ++C +diff --git a/file3 b/file3 +new file mode 100644 +index 0000000..7289e35 +--- /dev/null ++++ b/file3 +@@ -0,0 +1,4 @@ ++A ++B ++1 ++2 + +commit 9a6d4949b6b76956d9d5e26f2791ec2ceff5fdc0 +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:02:00 2006 +0000 + + Third + +diff --git a/dir/sub b/dir/sub +index 8422d40..cead32e 100644 +--- a/dir/sub ++++ b/dir/sub +@@ -2,3 +2,5 @@ A + B + C + D ++E ++F +diff --git a/file1 b/file1 +new file mode 100644 +index 0000000..b1e6722 +--- /dev/null ++++ b/file1 +@@ -0,0 +1,3 @@ ++A ++B ++C + +commit 1bde4ae5f36c8d9abe3a0fce0c6aab3c4a12fe44 +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:01:00 2006 +0000 + + Second + + This is the second commit. + +diff --git a/dir/sub b/dir/sub +index 35d242b..8422d40 100644 +--- a/dir/sub ++++ b/dir/sub +@@ -1,2 +1,4 @@ + A + B ++C ++D +diff --git a/file0 b/file0 +index 01e79c3..b414108 100644 +--- a/file0 ++++ b/file0 +@@ -1,3 +1,6 @@ + 1 + 2 + 3 ++4 ++5 ++6 +diff --git a/file2 b/file2 +deleted file mode 100644 +index 01e79c3..0000000 +--- a/file2 ++++ /dev/null +@@ -1,3 +0,0 @@ +-1 +-2 +-3 + +commit 444ac553ac7612cc88969031b02b3767fb8a353a +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:00:00 2006 +0000 + + Initial +$ diff --git a/t/t4013/diff.log_-p_--first-parent_master b/t/t4013/diff.log_-p_--first-parent_master new file mode 100644 index 0000000000..3fc896d424 --- /dev/null +++ b/t/t4013/diff.log_-p_--first-parent_master @@ -0,0 +1,78 @@ +$ git log -p --first-parent master +commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 +Merge: 9a6d494 c7a2ab9 +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:04:00 2006 +0000 + + Merge branch 'side' + +commit 9a6d4949b6b76956d9d5e26f2791ec2ceff5fdc0 +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:02:00 2006 +0000 + + Third + +diff --git a/dir/sub b/dir/sub +index 8422d40..cead32e 100644 +--- a/dir/sub ++++ b/dir/sub +@@ -2,3 +2,5 @@ A + B + C + D ++E ++F +diff --git a/file1 b/file1 +new file mode 100644 +index 0000000..b1e6722 +--- /dev/null ++++ b/file1 +@@ -0,0 +1,3 @@ ++A ++B ++C + +commit 1bde4ae5f36c8d9abe3a0fce0c6aab3c4a12fe44 +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:01:00 2006 +0000 + + Second + + This is the second commit. + +diff --git a/dir/sub b/dir/sub +index 35d242b..8422d40 100644 +--- a/dir/sub ++++ b/dir/sub +@@ -1,2 +1,4 @@ + A + B ++C ++D +diff --git a/file0 b/file0 +index 01e79c3..b414108 100644 +--- a/file0 ++++ b/file0 +@@ -1,3 +1,6 @@ + 1 + 2 + 3 ++4 ++5 ++6 +diff --git a/file2 b/file2 +deleted file mode 100644 +index 01e79c3..0000000 +--- a/file2 ++++ /dev/null +@@ -1,3 +0,0 @@ +-1 +-2 +-3 + +commit 444ac553ac7612cc88969031b02b3767fb8a353a +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:00:00 2006 +0000 + + Initial +$ diff --git a/t/t4013/diff.show_--first-parent_master b/t/t4013/diff.show_--first-parent_master new file mode 100644 index 0000000000..3dcbe473a0 --- /dev/null +++ b/t/t4013/diff.show_--first-parent_master @@ -0,0 +1,30 @@ +$ git show --first-parent master +commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 +Merge: 9a6d494 c7a2ab9 +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:04:00 2006 +0000 + + Merge branch 'side' + +diff --git a/dir/sub b/dir/sub +index cead32e..992913c 100644 +--- a/dir/sub ++++ b/dir/sub +@@ -4,3 +4,5 @@ C + D + E + F ++1 ++2 +diff --git a/file0 b/file0 +index b414108..10a8a9f 100644 +--- a/file0 ++++ b/file0 +@@ -4,3 +4,6 @@ + 4 + 5 + 6 ++A ++B ++C +$ diff --git a/t/t4013/diff.show_-c_master b/t/t4013/diff.show_-c_master new file mode 100644 index 0000000000..81aba8da96 --- /dev/null +++ b/t/t4013/diff.show_-c_master @@ -0,0 +1,36 @@ +$ git show -c master +commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 +Merge: 9a6d494 c7a2ab9 +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:04:00 2006 +0000 + + Merge branch 'side' + +diff --combined dir/sub +index cead32e,7289e35..992913c +--- a/dir/sub ++++ b/dir/sub +@@@ -1,6 -1,4 +1,8 @@@ + A + B + +C + +D + +E + +F ++ 1 ++ 2 +diff --combined file0 +index b414108,f4615da..10a8a9f +--- a/file0 ++++ b/file0 +@@@ -1,6 -1,6 +1,9 @@@ + 1 + 2 + 3 + +4 + +5 + +6 ++ A ++ B ++ C +$ diff --git a/t/t4013/diff.show_-m_master b/t/t4013/diff.show_-m_master new file mode 100644 index 0000000000..4ea2ee453d --- /dev/null +++ b/t/t4013/diff.show_-m_master @@ -0,0 +1,93 @@ +$ git show -m master +commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 (from 9a6d4949b6b76956d9d5e26f2791ec2ceff5fdc0) +Merge: 9a6d494 c7a2ab9 +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:04:00 2006 +0000 + + Merge branch 'side' + +diff --git a/dir/sub b/dir/sub +index cead32e..992913c 100644 +--- a/dir/sub ++++ b/dir/sub +@@ -4,3 +4,5 @@ C + D + E + F ++1 ++2 +diff --git a/file0 b/file0 +index b414108..10a8a9f 100644 +--- a/file0 ++++ b/file0 +@@ -4,3 +4,6 @@ + 4 + 5 + 6 ++A ++B ++C + +commit 59d314ad6f356dd08601a4cd5e530381da3e3c64 (from c7a2ab9e8eac7b117442a607d5a9b3950ae34d5a) +Merge: 9a6d494 c7a2ab9 +Author: A U Thor <author@example.com> +Date: Mon Jun 26 00:04:00 2006 +0000 + + Merge branch 'side' + +diff --git a/dir/sub b/dir/sub +index 7289e35..992913c 100644 +--- a/dir/sub ++++ b/dir/sub +@@ -1,4 +1,8 @@ + A + B ++C ++D ++E ++F + 1 + 2 +diff --git a/file0 b/file0 +index f4615da..10a8a9f 100644 +--- a/file0 ++++ b/file0 +@@ -1,6 +1,9 @@ + 1 + 2 + 3 ++4 ++5 ++6 + A + B + C +diff --git a/file1 b/file1 +new file mode 100644 +index 0000000..b1e6722 +--- /dev/null ++++ b/file1 +@@ -0,0 +1,3 @@ ++A ++B ++C +diff --git a/file2 b/file2 +deleted file mode 100644 +index 01e79c3..0000000 +--- a/file2 ++++ /dev/null +@@ -1,3 +0,0 @@ +-1 +-2 +-3 +diff --git a/file3 b/file3 +deleted file mode 100644 +index 7289e35..0000000 +--- a/file3 ++++ /dev/null +@@ -1,4 +0,0 @@ +-A +-B +-1 +-2 +$ diff --git a/t/t4014-format-patch.sh b/t/t4014-format-patch.sh index c7b625642d..d21c37f3a2 100755 --- a/t/t4014-format-patch.sh +++ b/t/t4014-format-patch.sh @@ -609,4 +609,8 @@ test_expect_success 'format-patch -- <path>' ' ! grep "Use .--" error ' +test_expect_success 'format-patch --ignore-if-in-upstream HEAD' ' + git format-patch --ignore-if-in-upstream HEAD +' + test_done diff --git a/t/t4015-diff-whitespace.sh b/t/t4015-diff-whitespace.sh index 90f3342373..e92eab09cb 100755 --- a/t/t4015-diff-whitespace.sh +++ b/t/t4015-diff-whitespace.sh @@ -352,6 +352,48 @@ test_expect_success 'check tabs and spaces as indentation (indent-with-non-tab: ' +test_expect_success 'check tabs as indentation (tab-in-indent: off)' ' + + git config core.whitespace "-tab-in-indent" && + echo " foo ();" > x && + git diff --check + +' + +test_expect_success 'check tabs as indentation (tab-in-indent: on)' ' + + git config core.whitespace "tab-in-indent" && + echo " foo ();" > x && + test_must_fail git diff --check + +' + +test_expect_success 'check tabs and spaces as indentation (tab-in-indent: on)' ' + + git config core.whitespace "tab-in-indent" && + echo " foo ();" > x && + test_must_fail git diff --check + +' + +test_expect_success 'check tab-in-indent and indent-with-non-tab conflict' ' + + git config core.whitespace "tab-in-indent,indent-with-non-tab" && + echo "foo ();" > x && + test_must_fail git diff --check + +' + +test_expect_success 'check tab-in-indent excluded from wildcard whitespace attribute' ' + + git config --unset core.whitespace && + echo "x whitespace" > .gitattributes && + echo " foo ();" > x && + git diff --check && + rm -f .gitattributes + +' + test_expect_success 'line numbers in --check output are correct' ' echo "" > x && diff --git a/t/t4017-diff-retval.sh b/t/t4017-diff-retval.sh index 0391a5827e..61589853df 100755 --- a/t/t4017-diff-retval.sh +++ b/t/t4017-diff-retval.sh @@ -120,7 +120,6 @@ test_expect_success '--check with --no-pager returns 2 for dirty difference' ' ' - test_expect_success 'check should test not just the last line' ' echo "" >>a && git --no-pager diff --check @@ -142,4 +141,26 @@ test_expect_success 'check detects leftover conflict markers' ' git reset --hard ' +test_expect_success 'check honors conflict marker length' ' + git reset --hard && + echo ">>>>>>> boo" >>b && + echo "======" >>a && + git diff --check a && + ( + git diff --check b + test $? = 2 + ) && + git reset --hard && + echo ">>>>>>>> boo" >>b && + echo "========" >>a && + git diff --check && + echo "b conflict-marker-size=8" >.gitattributes && + ( + git diff --check b + test $? = 2 + ) && + git diff --check a && + git reset --hard +' + test_done diff --git a/t/t4026-color.sh b/t/t4026-color.sh index 5ade44c043..d5ccdd0cf8 100755 --- a/t/t4026-color.sh +++ b/t/t4026-color.sh @@ -8,14 +8,13 @@ test_description='Test diff/status color escape codes' color() { - git config diff.color.new "$1" && - test "`git config --get-color diff.color.new`" = "$2" + actual=$(git config --get-color no.such.slot "$1") && + test "$actual" = "$2" } invalid_color() { - git config diff.color.new "$1" && - test -z "`git config --get-color diff.color.new 2>/dev/null`" + test_must_fail git config --get-color no.such.slot "$1" } test_expect_success 'reset' ' @@ -42,6 +41,14 @@ test_expect_success 'fg bg attr' ' color "blue red ul" "[4;34;41m" ' +test_expect_success 'fg bg attr...' ' + color "blue bold dim ul blink reverse" "[1;2;4;5;7;34m" +' + +test_expect_success 'long color specification' ' + color "254 255 bold dim ul blink reverse" "[1;2;4;5;7;38;5;254;48;5;255m" +' + test_expect_success '256 colors' ' color "254 bold 255" "[1;38;5;254;48;5;255m" ' diff --git a/t/t4038-diff-combined.sh b/t/t4038-diff-combined.sh index 7584efa36b..40277c77aa 100755 --- a/t/t4038-diff-combined.sh +++ b/t/t4038-diff-combined.sh @@ -81,4 +81,12 @@ test_expect_success 'check combined output (2)' ' verify_helper sidesansone ' +test_expect_success 'diagnose truncated file' ' + >file && + git add file && + git commit --amend -C HEAD && + git show >out && + grep "diff --cc file" out +' + test_done diff --git a/t/t4041-diff-submodule.sh b/t/t4041-diff-submodule.sh index 464305405a..019acb926d 100755 --- a/t/t4041-diff-submodule.sh +++ b/t/t4041-diff-submodule.sh @@ -201,7 +201,7 @@ test_expect_success 'submodule contains untracked content' " echo new > sm1/new-file && git diff-index -p --submodule=log HEAD >actual && diff actual - <<-EOF -Submodule sm1 $head6..$head6-dirty: +Submodule sm1 contains untracked content EOF " @@ -209,7 +209,8 @@ test_expect_success 'submodule contains untracked and modifed content' " echo new > sm1/foo6 && git diff-index -p --submodule=log HEAD >actual && diff actual - <<-EOF -Submodule sm1 $head6..$head6-dirty: +Submodule sm1 contains untracked content +Submodule sm1 contains modified content EOF " @@ -217,7 +218,7 @@ test_expect_success 'submodule contains modifed content' " rm -f sm1/new-file && git diff-index -p --submodule=log HEAD >actual && diff actual - <<-EOF -Submodule sm1 $head6..$head6-dirty: +Submodule sm1 contains modified content EOF " @@ -235,7 +236,8 @@ test_expect_success 'modified submodule contains untracked content' " echo new > sm1/new-file && git diff-index -p --submodule=log HEAD >actual && diff actual - <<-EOF -Submodule sm1 $head6..$head8-dirty: +Submodule sm1 contains untracked content +Submodule sm1 $head6..$head8: > change EOF " @@ -244,7 +246,9 @@ test_expect_success 'modified submodule contains untracked and modifed content' echo modification >> sm1/foo6 && git diff-index -p --submodule=log HEAD >actual && diff actual - <<-EOF -Submodule sm1 $head6..$head8-dirty: +Submodule sm1 contains untracked content +Submodule sm1 contains modified content +Submodule sm1 $head6..$head8: > change EOF " @@ -253,7 +257,8 @@ test_expect_success 'modified submodule contains modifed content' " rm -f sm1/new-file && git diff-index -p --submodule=log HEAD >actual && diff actual - <<-EOF -Submodule sm1 $head6..$head8-dirty: +Submodule sm1 contains modified content +Submodule sm1 $head6..$head8: > change EOF " @@ -324,4 +329,19 @@ index 0000000..$head7 EOF " +test_expect_success 'setup .git file for sm2' ' + (cd sm2 && + REAL="$(pwd)/../.real" && + mv .git "$REAL" + echo "gitdir: $REAL" >.git) +' + +test_expect_success 'diff --submodule with .git file' ' + git diff --submodule HEAD^ >actual && + diff actual - <<-EOF +Submodule sm1 $head6...0000000 (submodule deleted) +Submodule sm2 0000000...$head7 (new submodule) +EOF +' + test_done diff --git a/t/t4042-diff-textconv-caching.sh b/t/t4042-diff-textconv-caching.sh new file mode 100755 index 0000000000..91f8198f05 --- /dev/null +++ b/t/t4042-diff-textconv-caching.sh @@ -0,0 +1,109 @@ +#!/bin/sh + +test_description='test textconv caching' +. ./test-lib.sh + +cat >helper <<'EOF' +#!/bin/sh +sed 's/^/converted: /' "$@" >helper.out +cat helper.out +EOF +chmod +x helper + +test_expect_success 'setup' ' + echo foo content 1 >foo.bin && + echo bar content 1 >bar.bin && + git add . && + git commit -m one && + echo foo content 2 >foo.bin && + echo bar content 2 >bar.bin && + git commit -a -m two && + echo "*.bin diff=magic" >.gitattributes && + git config diff.magic.textconv ./helper && + git config diff.magic.cachetextconv true +' + +cat >expect <<EOF +diff --git a/bar.bin b/bar.bin +index fcf9166..28283d5 100644 +--- a/bar.bin ++++ b/bar.bin +@@ -1 +1 @@ +-converted: bar content 1 ++converted: bar content 2 +diff --git a/foo.bin b/foo.bin +index d5b9fe3..1345db2 100644 +--- a/foo.bin ++++ b/foo.bin +@@ -1 +1 @@ +-converted: foo content 1 ++converted: foo content 2 +EOF + +test_expect_success 'first textconv works' ' + git diff HEAD^ HEAD >actual && + test_cmp expect actual +' + +test_expect_success 'cached textconv produces same output' ' + git diff HEAD^ HEAD >actual && + test_cmp expect actual +' + +test_expect_success 'cached textconv does not run helper' ' + rm -f helper.out && + git diff HEAD^ HEAD >actual && + test_cmp expect actual && + ! test -r helper.out +' + +cat >expect <<EOF +diff --git a/bar.bin b/bar.bin +index fcf9166..28283d5 100644 +--- a/bar.bin ++++ b/bar.bin +@@ -1,2 +1,2 @@ + converted: other +-converted: bar content 1 ++converted: bar content 2 +diff --git a/foo.bin b/foo.bin +index d5b9fe3..1345db2 100644 +--- a/foo.bin ++++ b/foo.bin +@@ -1,2 +1,2 @@ + converted: other +-converted: foo content 1 ++converted: foo content 2 +EOF +test_expect_success 'changing textconv invalidates cache' ' + echo other >other && + git config diff.magic.textconv "./helper other" && + git diff HEAD^ HEAD >actual && + test_cmp expect actual +' + +cat >expect <<EOF +diff --git a/bar.bin b/bar.bin +index fcf9166..28283d5 100644 +--- a/bar.bin ++++ b/bar.bin +@@ -1,2 +1,2 @@ + converted: other +-converted: bar content 1 ++converted: bar content 2 +diff --git a/foo.bin b/foo.bin +index d5b9fe3..1345db2 100644 +--- a/foo.bin ++++ b/foo.bin +@@ -1 +1 @@ +-converted: foo content 1 ++converted: foo content 2 +EOF +test_expect_success 'switching diff driver produces correct results' ' + git config diff.moremagic.textconv ./helper && + echo foo.bin diff=moremagic >>.gitattributes && + git diff HEAD^ HEAD >actual && + test_cmp expect actual +' + +test_done diff --git a/t/t4103-apply-binary.sh b/t/t4103-apply-binary.sh index ad4cc1a757..9692f16f35 100755 --- a/t/t4103-apply-binary.sh +++ b/t/t4103-apply-binary.sh @@ -20,23 +20,25 @@ EOF cat file1 >file2 cat file1 >file4 -git update-index --add --remove file1 file2 file4 -git commit -m 'Initial Version' 2>/dev/null - -git checkout -b binary -perl -pe 'y/x/\000/' <file1 >file3 -cat file3 >file4 -git add file2 -perl -pe 'y/\000/v/' <file3 >file1 -rm -f file2 -git update-index --add --remove file1 file2 file3 file4 -git commit -m 'Second Version' - -git diff-tree -p master binary >B.diff -git diff-tree -p -C master binary >C.diff - -git diff-tree -p --binary master binary >BF.diff -git diff-tree -p --binary -C master binary >CF.diff +test_expect_success 'setup' " + git update-index --add --remove file1 file2 file4 && + git commit -m 'Initial Version' 2>/dev/null && + + git checkout -b binary && + perl -pe 'y/x/\000/' <file1 >file3 && + cat file3 >file4 && + git add file2 && + perl -pe 'y/\000/v/' <file3 >file1 && + rm -f file2 && + git update-index --add --remove file1 file2 file3 file4 && + git commit -m 'Second Version' && + + git diff-tree -p master binary >B.diff && + git diff-tree -p -C master binary >C.diff && + + git diff-tree -p --binary master binary >BF.diff && + git diff-tree -p --binary -C master binary >CF.diff +" test_expect_success 'stat binary diff -- should not fail.' \ 'git checkout master diff --git a/t/t4104-apply-boundary.sh b/t/t4104-apply-boundary.sh index 0e3ce3611d..c617c2a33d 100755 --- a/t/t4104-apply-boundary.sh +++ b/t/t4104-apply-boundary.sh @@ -134,4 +134,13 @@ test_expect_success 'two lines' ' ' +test_expect_success 'apply patch with 3 context lines matching at end' ' + { echo a; echo b; echo c; echo d; } >file && + git add file && + echo e >>file && + git diff >patch && + >file && + test_must_fail git apply patch +' + test_done diff --git a/t/t4124-apply-ws-rule.sh b/t/t4124-apply-ws-rule.sh index ca26397590..d0af697aa1 100755 --- a/t/t4124-apply-ws-rule.sh +++ b/t/t4124-apply-ws-rule.sh @@ -11,21 +11,22 @@ prepare_test_file () { # ! trailing-space # @ space-before-tab # # indent-with-non-tab + # % tab-in-indent sed -e "s/_/ /g" -e "s/>/ /" <<-\EOF An_SP in an ordinary line>and a HT. - >A HT. - _>A SP and a HT (@). - _>_A SP, a HT and a SP (@). + >A HT (%). + _>A SP and a HT (@%). + _>_A SP, a HT and a SP (@%). _______Seven SP. ________Eight SP (#). - _______>Seven SP and a HT (@). - ________>Eight SP and a HT (@#). - _______>_Seven SP, a HT and a SP (@). - ________>_Eight SP, a HT and a SP (@#). + _______>Seven SP and a HT (@%). + ________>Eight SP and a HT (@#%). + _______>_Seven SP, a HT and a SP (@%). + ________>_Eight SP, a HT and a SP (@#%). _______________Fifteen SP (#). - _______________>Fifteen SP and a HT (@#). + _______________>Fifteen SP and a HT (@#%). ________________Sixteen SP (#). - ________________>Sixteen SP and a HT (@#). + ________________>Sixteen SP and a HT (@#%). _____a__Five SP, a non WS, two SP. A line with a (!) trailing SP_ A line with a (!) trailing HT> @@ -39,7 +40,6 @@ apply_patch () { } test_fix () { - # fix should not barf apply_patch --whitespace=fix || return 1 @@ -130,20 +130,25 @@ do for i in - '' do case "$i" in '') ti='#' ;; *) ti= ;; esac - rule=${t}trailing,${s}space,${i}indent - - rm -f .gitattributes - test_expect_success "rule=$rule" ' - git config core.whitespace "$rule" && - test_fix "$tt$ts$ti" - ' - - test_expect_success "rule=$rule (attributes)" ' - git config --unset core.whitespace && - echo "target whitespace=$rule" >.gitattributes && - test_fix "$tt$ts$ti" - ' - + for h in - '' + do + [ -z "$h$i" ] && continue + case "$h" in '') th='%' ;; *) th= ;; esac + rule=${t}trailing,${s}space,${i}indent,${h}tab + + rm -f .gitattributes + test_expect_success "rule=$rule" ' + git config core.whitespace "$rule" && + test_fix "$tt$ts$ti$th" + ' + + test_expect_success "rule=$rule (attributes)" ' + git config --unset core.whitespace && + echo "target whitespace=$rule" >.gitattributes && + test_fix "$tt$ts$ti$th" + ' + + done done done done @@ -261,4 +266,186 @@ test_expect_success 'blank but not empty at EOF' ' grep "new blank line at EOF" error ' +test_expect_success 'applying beyond EOF requires one non-blank context line' ' + { echo; echo; echo; echo; } >one && + git add one && + { echo b; } >>one && + git diff -- one >patch && + + git checkout one && + { echo a; echo; } >one && + cp one expect && + test_must_fail git apply --whitespace=fix patch && + test_cmp one expect && + test_must_fail git apply --ignore-space-change --whitespace=fix patch && + test_cmp one expect +' + +test_expect_success 'tons of blanks at EOF should not apply' ' + for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16; do + echo; echo; echo; echo; + done >one && + git add one && + echo a >>one && + git diff -- one >patch && + + >one && + test_must_fail git apply --whitespace=fix patch && + test_must_fail git apply --ignore-space-change --whitespace=fix patch +' + +test_expect_success 'missing blank line at end with --whitespace=fix' ' + echo a >one && + echo >>one && + git add one && + echo b >>one && + cp one expect && + git diff -- one >patch && + echo a >one && + cp one saved-one && + test_must_fail git apply patch && + git apply --whitespace=fix patch && + test_cmp one expect && + mv saved-one one && + git apply --ignore-space-change --whitespace=fix patch && + test_cmp one expect +' + +test_expect_success 'two missing blank lines at end with --whitespace=fix' ' + { echo a; echo; echo b; echo c; } >one && + cp one no-blank-lines && + { echo; echo; } >>one && + git add one && + echo d >>one && + cp one expect && + echo >>one && + git diff -- one >patch && + cp no-blank-lines one && + test_must_fail git apply patch && + git apply --whitespace=fix patch && + test_cmp one expect && + mv no-blank-lines one && + test_must_fail git apply patch && + git apply --ignore-space-change --whitespace=fix patch && + test_cmp one expect +' + +test_expect_success 'missing blank line at end, insert before end, --whitespace=fix' ' + { echo a; echo; } >one && + git add one && + { echo b; echo a; echo; } >one && + cp one expect && + git diff -- one >patch && + echo a >one && + test_must_fail git apply patch && + git apply --whitespace=fix patch && + test_cmp one expect +' + +test_expect_success 'shrink file with tons of missing blanks at end of file' ' + { echo a; echo b; echo c; } >one && + cp one no-blank-lines && + for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16; do + echo; echo; echo; echo; + done >>one && + git add one && + echo a >one && + cp one expect && + git diff -- one >patch && + cp no-blank-lines one && + test_must_fail git apply patch && + git apply --whitespace=fix patch && + test_cmp one expect && + mv no-blank-lines one && + git apply --ignore-space-change --whitespace=fix patch && + test_cmp one expect +' + +test_expect_success 'missing blanks at EOF must only match blank lines' ' + { echo a; echo b; } >one && + git add one && + { echo c; echo d; } >>one && + git diff -- one >patch && + + echo a >one && + test_must_fail git apply patch + test_must_fail git apply --whitespace=fix patch && + test_must_fail git apply --ignore-space-change --whitespace=fix patch +' + +sed -e's/Z//' >one <<EOF +a +b +c + Z +EOF + +test_expect_success 'missing blank line should match context line with spaces' ' + git add one && + echo d >>one && + git diff -- one >patch && + { echo a; echo b; echo c; } >one && + cp one expect && + { echo; echo d; } >>expect && + git add one && + + git apply --whitespace=fix patch && + test_cmp one expect +' + +sed -e's/Z//' >one <<EOF +a +b +c + Z +EOF + +test_expect_success 'same, but with the --ignore-space-option' ' + git add one && + echo d >>one && + cp one expect && + git diff -- one >patch && + { echo a; echo b; echo c; } >one && + git add one && + + git checkout-index -f one && + git apply --ignore-space-change --whitespace=fix patch && + test_cmp one expect +' + +test_expect_success 'same, but with CR-LF line endings && cr-at-eol set' ' + git config core.whitespace cr-at-eol && + printf "a\r\n" >one && + printf "b\r\n" >>one && + printf "c\r\n" >>one && + cp one save-one && + printf " \r\n" >>one + git add one && + printf "d\r\n" >>one && + cp one expect && + git diff -- one >patch && + mv save-one one && + + git apply --ignore-space-change --whitespace=fix patch && + test_cmp one expect +' + +test_expect_success 'same, but with CR-LF line endings && cr-at-eol unset' ' + git config --unset core.whitespace && + printf "a\r\n" >one && + printf "b\r\n" >>one && + printf "c\r\n" >>one && + cp one save-one && + printf " \r\n" >>one + git add one && + cp one expect && + printf "d\r\n" >>one && + git diff -- one >patch && + mv save-one one && + echo d >>expect && + + git apply --ignore-space-change --whitespace=fix patch && + test_cmp one expect +' + test_done diff --git a/t/t4134-apply-submodule.sh b/t/t4134-apply-submodule.sh new file mode 100755 index 0000000000..1b82f93cff --- /dev/null +++ b/t/t4134-apply-submodule.sh @@ -0,0 +1,38 @@ +#!/bin/sh +# +# Copyright (c) 2010 Peter Collingbourne +# + +test_description='git apply submodule tests' + +. ./test-lib.sh + +test_expect_success setup ' + cat > create-sm.patch <<EOF +diff --git a/dir/sm b/dir/sm +new file mode 160000 +index 0000000..0123456 +--- /dev/null ++++ b/dir/sm +@@ -0,0 +1 @@ ++Subproject commit 0123456789abcdef0123456789abcdef01234567 +EOF + cat > remove-sm.patch <<EOF +diff --git a/dir/sm b/dir/sm +deleted file mode 160000 +index 0123456..0000000 +--- a/dir/sm ++++ /dev/null +@@ -1 +0,0 @@ +-Subproject commit 0123456789abcdef0123456789abcdef01234567 +EOF +' + +test_expect_success 'removing a submodule also removes all leading subdirectories' ' + git apply --index create-sm.patch && + test -d dir/sm && + git apply --index remove-sm.patch && + test \! -d dir +' + +test_done diff --git a/t/t4200-rerere.sh b/t/t4200-rerere.sh index bb402c3780..70856d07ed 100755 --- a/t/t4200-rerere.sh +++ b/t/t4200-rerere.sh @@ -8,40 +8,42 @@ test_description='git rerere . ./test-lib.sh -cat > a1 << EOF -Some title -========== -Whether 'tis nobler in the mind to suffer -The slings and arrows of outrageous fortune, -Or to take arms against a sea of troubles, -And by opposing end them? To die: to sleep; -No more; and by a sleep to say we end -The heart-ache and the thousand natural shocks -That flesh is heir to, 'tis a consummation -Devoutly to be wish'd. -EOF - -git add a1 -git commit -q -a -m initial - -git checkout -b first -cat >> a1 << EOF -Some title -========== -To die, to sleep; -To sleep: perchance to dream: ay, there's the rub; -For in that sleep of death what dreams may come -When we have shuffled off this mortal coil, -Must give us pause: there's the respect -That makes calamity of so long life; -EOF -git commit -q -a -m first - -git checkout -b second master -git show first:a1 | -sed -e 's/To die, t/To die! T/' -e 's/Some title/Some Title/' > a1 -echo "* END *" >>a1 -git commit -q -a -m second +test_expect_success 'setup' " + cat > a1 <<- EOF && + Some title + ========== + Whether 'tis nobler in the mind to suffer + The slings and arrows of outrageous fortune, + Or to take arms against a sea of troubles, + And by opposing end them? To die: to sleep; + No more; and by a sleep to say we end + The heart-ache and the thousand natural shocks + That flesh is heir to, 'tis a consummation + Devoutly to be wish'd. + EOF + + git add a1 && + git commit -q -a -m initial && + + git checkout -b first && + cat >> a1 <<- EOF && + Some title + ========== + To die, to sleep; + To sleep: perchance to dream: ay, there's the rub; + For in that sleep of death what dreams may come + When we have shuffled off this mortal coil, + Must give us pause: there's the respect + That makes calamity of so long life; + EOF + git commit -q -a -m first && + + git checkout -b second master && + git show first:a1 | + sed -e 's/To die, t/To die! T/' -e 's/Some title/Some Title/' > a1 && + echo '* END *' >>a1 && + git commit -q -a -m second +" test_expect_success 'nothing recorded without rerere' ' (rm -rf .git/rr-cache; git config rerere.enabled false) && diff --git a/t/t4202-log.sh b/t/t4202-log.sh index 1dc224f6fb..2230e606ed 100755 --- a/t/t4202-log.sh +++ b/t/t4202-log.sh @@ -387,5 +387,54 @@ test_expect_success 'log --graph with merge' ' test_cmp expect actual ' +test_expect_success 'log.decorate configuration' ' + git config --unset-all log.decorate || : + + git log --oneline >expect.none && + git log --oneline --decorate >expect.short && + git log --oneline --decorate=full >expect.full && + + echo "[log] decorate" >>.git/config && + git log --oneline >actual && + test_cmp expect.short actual && + + git config --unset-all log.decorate && + git config log.decorate true && + git log --oneline >actual && + test_cmp expect.short actual && + git log --oneline --decorate=full >actual && + test_cmp expect.full actual && + git log --oneline --decorate=no >actual && + test_cmp expect.none actual && + + git config --unset-all log.decorate && + git config log.decorate no && + git log --oneline >actual && + test_cmp expect.none actual && + git log --oneline --decorate >actual && + test_cmp expect.short actual && + git log --oneline --decorate=full >actual && + test_cmp expect.full actual && + + git config --unset-all log.decorate && + git config log.decorate short && + git log --oneline >actual && + test_cmp expect.short actual && + git log --oneline --no-decorate >actual && + test_cmp expect.none actual && + git log --oneline --decorate=full >actual && + test_cmp expect.full actual && + + git config --unset-all log.decorate && + git config log.decorate full && + git log --oneline >actual && + test_cmp expect.full actual && + git log --oneline --no-decorate >actual && + test_cmp expect.none actual && + git log --oneline --decorate >actual && + test_cmp expect.short actual + +' + test_done diff --git a/t/t5407-post-rewrite-hook.sh b/t/t5407-post-rewrite-hook.sh new file mode 100755 index 0000000000..552da65a61 --- /dev/null +++ b/t/t5407-post-rewrite-hook.sh @@ -0,0 +1,199 @@ +#!/bin/sh +# +# Copyright (c) 2010 Thomas Rast +# + +test_description='Test the post-rewrite hook.' +. ./test-lib.sh + +test_expect_success 'setup' ' + test_commit A foo A && + test_commit B foo B && + test_commit C foo C && + test_commit D foo D +' + +mkdir .git/hooks + +cat >.git/hooks/post-rewrite <<EOF +#!/bin/sh +echo \$@ > "$TRASH_DIRECTORY"/post-rewrite.args +cat > "$TRASH_DIRECTORY"/post-rewrite.data +EOF +chmod u+x .git/hooks/post-rewrite + +clear_hook_input () { + rm -f post-rewrite.args post-rewrite.data +} + +verify_hook_input () { + test_cmp "$TRASH_DIRECTORY"/post-rewrite.args expected.args && + test_cmp "$TRASH_DIRECTORY"/post-rewrite.data expected.data +} + +test_expect_success 'git commit --amend' ' + clear_hook_input && + echo "D new message" > newmsg && + oldsha=$(git rev-parse HEAD^0) && + git commit -Fnewmsg --amend && + echo amend > expected.args && + echo $oldsha $(git rev-parse HEAD^0) > expected.data && + verify_hook_input +' + +test_expect_success 'git commit --amend --no-post-rewrite' ' + clear_hook_input && + echo "D new message again" > newmsg && + git commit --no-post-rewrite -Fnewmsg --amend && + test ! -f post-rewrite.args && + test ! -f post-rewrite.data +' + +test_expect_success 'git rebase' ' + git reset --hard D && + clear_hook_input && + test_must_fail git rebase --onto A B && + echo C > foo && + git add foo && + git rebase --continue && + echo rebase >expected.args && + cat >expected.data <<EOF && +$(git rev-parse C) $(git rev-parse HEAD^) +$(git rev-parse D) $(git rev-parse HEAD) +EOF + verify_hook_input +' + +test_expect_success 'git rebase --skip' ' + git reset --hard D && + clear_hook_input && + test_must_fail git rebase --onto A B && + test_must_fail git rebase --skip && + echo D > foo && + git add foo && + git rebase --continue && + echo rebase >expected.args && + cat >expected.data <<EOF && +$(git rev-parse D) $(git rev-parse HEAD) +EOF + verify_hook_input +' + +test_expect_success 'git rebase -m' ' + git reset --hard D && + clear_hook_input && + test_must_fail git rebase -m --onto A B && + echo C > foo && + git add foo && + git rebase --continue && + echo rebase >expected.args && + cat >expected.data <<EOF && +$(git rev-parse C) $(git rev-parse HEAD^) +$(git rev-parse D) $(git rev-parse HEAD) +EOF + verify_hook_input +' + +test_expect_success 'git rebase -m --skip' ' + git reset --hard D && + clear_hook_input && + test_must_fail git rebase --onto A B && + test_must_fail git rebase --skip && + echo D > foo && + git add foo && + git rebase --continue && + echo rebase >expected.args && + cat >expected.data <<EOF && +$(git rev-parse D) $(git rev-parse HEAD) +EOF + verify_hook_input +' + +. "$TEST_DIRECTORY"/lib-rebase.sh + +set_fake_editor + +# Helper to work around the lack of one-shot exporting for +# test_must_fail (as it is a shell function) +test_fail_interactive_rebase () { + ( + FAKE_LINES="$1" && + shift && + export FAKE_LINES && + test_must_fail git rebase -i "$@" + ) +} + +test_expect_success 'git rebase -i (unchanged)' ' + git reset --hard D && + clear_hook_input && + test_fail_interactive_rebase "1 2" --onto A B && + echo C > foo && + git add foo && + git rebase --continue && + echo rebase >expected.args && + cat >expected.data <<EOF && +$(git rev-parse C) $(git rev-parse HEAD^) +$(git rev-parse D) $(git rev-parse HEAD) +EOF + verify_hook_input +' + +test_expect_success 'git rebase -i (skip)' ' + git reset --hard D && + clear_hook_input && + test_fail_interactive_rebase "2" --onto A B && + echo D > foo && + git add foo && + git rebase --continue && + echo rebase >expected.args && + cat >expected.data <<EOF && +$(git rev-parse D) $(git rev-parse HEAD) +EOF + verify_hook_input +' + +test_expect_success 'git rebase -i (squash)' ' + git reset --hard D && + clear_hook_input && + test_fail_interactive_rebase "1 squash 2" --onto A B && + echo C > foo && + git add foo && + git rebase --continue && + echo rebase >expected.args && + cat >expected.data <<EOF && +$(git rev-parse C) $(git rev-parse HEAD) +$(git rev-parse D) $(git rev-parse HEAD) +EOF + verify_hook_input +' + +test_expect_success 'git rebase -i (fixup without conflict)' ' + git reset --hard D && + clear_hook_input && + FAKE_LINES="1 fixup 2" git rebase -i B && + echo rebase >expected.args && + cat >expected.data <<EOF && +$(git rev-parse C) $(git rev-parse HEAD) +$(git rev-parse D) $(git rev-parse HEAD) +EOF + verify_hook_input +' + +test_expect_success 'git rebase -i (double edit)' ' + git reset --hard D && + clear_hook_input && + FAKE_LINES="edit 1 edit 2" git rebase -i B && + git rebase --continue && + echo something > foo && + git add foo && + git rebase --continue && + echo rebase >expected.args && + cat >expected.data <<EOF && +$(git rev-parse C) $(git rev-parse HEAD^) +$(git rev-parse D) $(git rev-parse HEAD) +EOF + verify_hook_input +' + +test_done diff --git a/t/t5505-remote.sh b/t/t5505-remote.sh index a82c5ffa1c..230c0cd784 100755 --- a/t/t5505-remote.sh +++ b/t/t5505-remote.sh @@ -110,17 +110,18 @@ test_expect_success 'remove remote' ' test_expect_success 'remove remote protects non-remote branches' ' ( cd test && - (cat >expect1 <<EOF + { cat >expect1 <<EOF Note: A non-remote branch was not removed; to delete it, use: git branch -d master EOF - cat >expect2 <<EOF + } && + { cat >expect2 <<EOF Note: Non-remote branches were not removed; to delete them, use: git branch -d foobranch git branch -d master EOF -) && - git tag footag + } && + git tag footag && git config --add remote.oops.fetch "+refs/*:refs/*" && git remote rm oops 2>actual1 && git branch foobranch && @@ -507,15 +508,15 @@ test_expect_success 'remote prune to cause a dangling symref' ' ( cd seven && git remote prune origin - ) 2>err && + ) >err 2>&1 && grep "has become dangling" err && - : And the dangling symref will not cause other annoying errors + : And the dangling symref will not cause other annoying errors && ( cd seven && git branch -a ) 2>err && - ! grep "points nowhere" err + ! grep "points nowhere" err && ( cd seven && test_must_fail git branch nomore origin @@ -534,43 +535,34 @@ test_expect_success 'show empty remote' ' ' test_expect_success 'new remote' ' -( git remote add someremote foo && echo foo >expect && git config --get-all remote.someremote.url >actual && cmp expect actual -) ' test_expect_success 'remote set-url bar' ' -( git remote set-url someremote bar && echo bar >expect && git config --get-all remote.someremote.url >actual && cmp expect actual -) ' test_expect_success 'remote set-url baz bar' ' -( git remote set-url someremote baz bar && echo baz >expect && git config --get-all remote.someremote.url >actual && cmp expect actual -) ' test_expect_success 'remote set-url zot bar' ' -( test_must_fail git remote set-url someremote zot bar && echo baz >expect && git config --get-all remote.someremote.url >actual && cmp expect actual -) ' test_expect_success 'remote set-url --push zot baz' ' -( test_must_fail git remote set-url --push someremote zot baz && echo "YYY" >expect && echo baz >>expect && @@ -578,11 +570,9 @@ test_expect_success 'remote set-url --push zot baz' ' echo "YYY" >>actual && git config --get-all remote.someremote.url >>actual && cmp expect actual -) ' test_expect_success 'remote set-url --push zot' ' -( git remote set-url --push someremote zot && echo zot >expect && echo "YYY" >>expect && @@ -591,11 +581,9 @@ test_expect_success 'remote set-url --push zot' ' echo "YYY" >>actual && git config --get-all remote.someremote.url >>actual && cmp expect actual -) ' test_expect_success 'remote set-url --push qux zot' ' -( git remote set-url --push someremote qux zot && echo qux >expect && echo "YYY" >>expect && @@ -604,11 +592,9 @@ test_expect_success 'remote set-url --push qux zot' ' echo "YYY" >>actual && git config --get-all remote.someremote.url >>actual && cmp expect actual -) ' test_expect_success 'remote set-url --push foo qu+x' ' -( git remote set-url --push someremote foo qu+x && echo foo >expect && echo "YYY" >>expect && @@ -617,11 +603,9 @@ test_expect_success 'remote set-url --push foo qu+x' ' echo "YYY" >>actual && git config --get-all remote.someremote.url >>actual && cmp expect actual -) ' test_expect_success 'remote set-url --push --add aaa' ' -( git remote set-url --push --add someremote aaa && echo foo >expect && echo aaa >>expect && @@ -631,11 +615,9 @@ test_expect_success 'remote set-url --push --add aaa' ' echo "YYY" >>actual && git config --get-all remote.someremote.url >>actual && cmp expect actual -) ' test_expect_success 'remote set-url --push bar aaa' ' -( git remote set-url --push someremote bar aaa && echo foo >expect && echo bar >>expect && @@ -645,11 +627,9 @@ test_expect_success 'remote set-url --push bar aaa' ' echo "YYY" >>actual && git config --get-all remote.someremote.url >>actual && cmp expect actual -) ' test_expect_success 'remote set-url --push --delete bar' ' -( git remote set-url --push --delete someremote bar && echo foo >expect && echo "YYY" >>expect && @@ -658,11 +638,9 @@ test_expect_success 'remote set-url --push --delete bar' ' echo "YYY" >>actual && git config --get-all remote.someremote.url >>actual && cmp expect actual -) ' test_expect_success 'remote set-url --push --delete foo' ' -( git remote set-url --push --delete someremote foo && echo "YYY" >expect && echo baz >>expect && @@ -670,11 +648,9 @@ test_expect_success 'remote set-url --push --delete foo' ' echo "YYY" >>actual && git config --get-all remote.someremote.url >>actual && cmp expect actual -) ' test_expect_success 'remote set-url --add bbb' ' -( git remote set-url --add someremote bbb && echo "YYY" >expect && echo baz >>expect && @@ -683,12 +659,10 @@ test_expect_success 'remote set-url --add bbb' ' echo "YYY" >>actual && git config --get-all remote.someremote.url >>actual && cmp expect actual -) ' test_expect_success 'remote set-url --delete .*' ' -( - test_must_fail git remote set-url --delete someremote .* && + test_must_fail git remote set-url --delete someremote .\* && echo "YYY" >expect && echo baz >>expect && echo bbb >>expect && @@ -696,11 +670,9 @@ test_expect_success 'remote set-url --delete .*' ' echo "YYY" >>actual && git config --get-all remote.someremote.url >>actual && cmp expect actual -) ' test_expect_success 'remote set-url --delete bbb' ' -( git remote set-url --delete someremote bbb && echo "YYY" >expect && echo baz >>expect && @@ -708,11 +680,9 @@ test_expect_success 'remote set-url --delete bbb' ' echo "YYY" >>actual && git config --get-all remote.someremote.url >>actual && cmp expect actual -) ' test_expect_success 'remote set-url --delete baz' ' -( test_must_fail git remote set-url --delete someremote baz && echo "YYY" >expect && echo baz >>expect && @@ -720,11 +690,9 @@ test_expect_success 'remote set-url --delete baz' ' echo "YYY" >>actual && git config --get-all remote.someremote.url >>actual && cmp expect actual -) ' test_expect_success 'remote set-url --add ccc' ' -( git remote set-url --add someremote ccc && echo "YYY" >expect && echo baz >>expect && @@ -733,11 +701,9 @@ test_expect_success 'remote set-url --add ccc' ' echo "YYY" >>actual && git config --get-all remote.someremote.url >>actual && cmp expect actual -) ' test_expect_success 'remote set-url --delete baz' ' -( git remote set-url --delete someremote baz && echo "YYY" >expect && echo ccc >>expect && @@ -745,7 +711,6 @@ test_expect_success 'remote set-url --delete baz' ' echo "YYY" >>actual && git config --get-all remote.someremote.url >>actual && cmp expect actual -) ' test_done diff --git a/t/t5512-ls-remote.sh b/t/t5512-ls-remote.sh index 1dd8eed5bb..3cf1b3da40 100755 --- a/t/t5512-ls-remote.sh +++ b/t/t5512-ls-remote.sh @@ -49,4 +49,62 @@ test_expect_success 'ls-remote self' ' ' +test_expect_success 'dies when no remote specified and no default remotes found' ' + + test_must_fail git ls-remote + +' + +test_expect_success 'use "origin" when no remote specified' ' + + git remote add origin "$(pwd)/.git" && + git ls-remote >actual && + test_cmp expected.all actual + +' + +test_expect_success 'use branch.<name>.remote if possible' ' + + # + # Test that we are indeed using branch.<name>.remote, not "origin", even + # though the "origin" remote has been set. + # + + # setup a new remote to differentiate from "origin" + git clone . other.git && + ( + cd other.git && + echo "$(git rev-parse HEAD) HEAD" + git show-ref | sed -e "s/ / /" + ) >exp && + + git remote add other other.git && + git config branch.master.remote other && + + git ls-remote >actual && + test_cmp exp actual + +' + +cat >exp <<EOF +fatal: 'refs*master' does not appear to be a git repository +fatal: The remote end hung up unexpectedly +EOF +test_expect_success 'confuses pattern as remote when no remote specified' ' + # + # Do not expect "git ls-remote <pattern>" to work; ls-remote, correctly, + # confuses <pattern> for <remote>. Although ugly, this behaviour is akin + # to the confusion of refspecs for remotes by git-fetch and git-push, + # eg: + # + # $ git fetch branch + # + + # We could just as easily have used "master"; the "*" emphasizes its + # role as a pattern. + test_must_fail git ls-remote refs*master >actual 2>&1 && + test_cmp exp actual + +' + test_done diff --git a/t/t5516-fetch-push.sh b/t/t5516-fetch-push.sh index 2de98e6561..6a37a4d993 100755 --- a/t/t5516-fetch-push.sh +++ b/t/t5516-fetch-push.sh @@ -528,7 +528,7 @@ test_expect_success 'push does not update local refs on failure' ' mk_test heads/master && mk_child child && mkdir testrepo/.git/hooks && - echo exit 1 >testrepo/.git/hooks/pre-receive && + echo "#!/no/frobnication/today" >testrepo/.git/hooks/pre-receive && chmod +x testrepo/.git/hooks/pre-receive && (cd child && git pull .. master diff --git a/t/t5541-http-push.sh b/t/t5541-http-push.sh index 795dc2bcdf..17e1bdc5a8 100755 --- a/t/t5541-http-push.sh +++ b/t/t5541-http-push.sh @@ -34,8 +34,34 @@ test_expect_success 'setup remote repository' ' mv test_repo.git "$HTTPD_DOCUMENT_ROOT_PATH" ' -test_expect_success 'clone remote repository' ' +cat >exp <<EOF +GET /smart/test_repo.git/info/refs?service=git-upload-pack HTTP/1.1 200 +POST /smart/test_repo.git/git-upload-pack HTTP/1.1 200 +EOF +test_expect_success 'no empty path components' ' + # In the URL, add a trailing slash, and see if git appends yet another + # slash. cd "$ROOT_PATH" && + git clone $HTTPD_URL/smart/test_repo.git/ test_repo_clone && + + sed -e " + s/^.* \"// + s/\"// + s/ [1-9][0-9]*\$// + s/^GET /GET / + " >act <"$HTTPD_ROOT_PATH"/access.log && + + # Clear the log, so that it does not affect the "used receive-pack + # service" test which reads the log too. + # + # We do this before the actual comparison to ensure the log is cleared. + echo > "$HTTPD_ROOT_PATH"/access.log && + + test_cmp exp act +' + +test_expect_success 'clone remote repository' ' + rm -rf test_repo_clone && git clone $HTTPD_URL/smart/test_repo.git test_repo_clone ' @@ -68,6 +94,7 @@ test_expect_success 'create and delete remote branch' ' ' cat >exp <<EOF + GET /smart/test_repo.git/info/refs?service=git-upload-pack HTTP/1.1 200 POST /smart/test_repo.git/git-upload-pack HTTP/1.1 200 GET /smart/test_repo.git/info/refs?service=git-receive-pack HTTP/1.1 200 diff --git a/t/t5601-clone.sh b/t/t5601-clone.sh index 214756731b..678cee502d 100755 --- a/t/t5601-clone.sh +++ b/t/t5601-clone.sh @@ -34,7 +34,7 @@ test_expect_success 'clone with excess parameters (2)' ' test_expect_success 'output from clone' ' rm -fr dst && git clone -n "file://$(pwd)/src" dst >output && - test $(grep Initialized output | wc -l) = 1 + test $(grep Clon output | wc -l) = 1 ' test_expect_success 'clone does not keep pack' ' diff --git a/t/t5705-clone-2gb.sh b/t/t5705-clone-2gb.sh index adfaae8c5b..8afbdd4de2 100755 --- a/t/t5705-clone-2gb.sh +++ b/t/t5705-clone-2gb.sh @@ -12,7 +12,7 @@ test_expect_success 'setup' ' git config pack.compression 0 && git config pack.depth 0 && - blobsize=$((20*1024*1024)) && + blobsize=$((100*1024*1024)) && blobcount=$((2*1024*1024*1024/$blobsize+1)) && i=1 && (while test $i -le $blobcount @@ -36,9 +36,15 @@ test_expect_success 'setup' ' ' -test_expect_success 'clone' ' +test_expect_success 'clone - bare' ' - git clone --bare --no-hardlinks . clone + git clone --bare --no-hardlinks . clone-bare + +' + +test_expect_success 'clone - with worktree, file:// protocol' ' + + git clone file://. clone-wt ' diff --git a/t/t6006-rev-list-format.sh b/t/t6006-rev-list-format.sh index b0047d3c6b..9992be69f4 100755 --- a/t/t6006-rev-list-format.sh +++ b/t/t6006-rev-list-format.sh @@ -101,6 +101,15 @@ commit 131a310eb913d107dd3c09a65d1651175898735d commit 86c75cfd708a0e5868dc876ed5b8bb66c80b4873 EOF +test_format raw-body %B <<'EOF' +commit 131a310eb913d107dd3c09a65d1651175898735d +changed foo + +commit 86c75cfd708a0e5868dc876ed5b8bb66c80b4873 +added foo + +EOF + test_format colors %Credfoo%Cgreenbar%Cbluebaz%Cresetxyzzy <<'EOF' commit 131a310eb913d107dd3c09a65d1651175898735d [31mfoo[32mbar[34mbaz[mxyzzy @@ -209,4 +218,13 @@ test_expect_success '%gd shortens ref name' ' test_cmp expect.gd-short actual.gd-short ' +test_expect_success 'oneline with empty message' ' + git commit -m "dummy" --allow-empty && + git commit -m "dummy" --allow-empty && + git filter-branch --msg-filter "sed -e s/dummy//" HEAD^^.. && + git rev-list --oneline HEAD >test.txt && + test $(git rev-list --oneline HEAD | wc -l) -eq 5 && + test $(git rev-list --oneline --graph HEAD | wc -l) -eq 5 +' + test_done diff --git a/t/t6023-merge-file.sh b/t/t6023-merge-file.sh index d605024cf8..d486d73994 100755 --- a/t/t6023-merge-file.sh +++ b/t/t6023-merge-file.sh @@ -181,7 +181,7 @@ et nihil mihi deerit; In loco pascuae ibi me collocavit; super aquam refectionis educavit me. -||||||| +||||||| new5.txt et nihil mihi deerit. In loco pascuae ibi me collocavit, super aquam refectionis educavit me; @@ -215,4 +215,41 @@ test_expect_success '"diff3 -m" style output (2)' ' test_cmp expect actual ' +cat >expect <<\EOF +Dominus regit me, +<<<<<<<<<< new8.txt +et nihil mihi deerit; + + + + +In loco pascuae ibi me collocavit; +super aquam refectionis educavit me. +|||||||||| new5.txt +et nihil mihi deerit. +In loco pascuae ibi me collocavit, +super aquam refectionis educavit me; +========== +et nihil mihi deerit, + + + + +In loco pascuae ibi me collocavit -- +super aquam refectionis educavit me, +>>>>>>>>>> new9.txt +animam meam convertit, +deduxit me super semitas jusitiae, +propter nomen suum. +Nam et si ambulavero in medio umbrae mortis, +non timebo mala, quoniam TU mecum es: +virga tua et baculus tuus ipsa me consolata sunt. +EOF + +test_expect_success 'marker size' ' + test_must_fail git merge-file -p --marker-size=10 \ + new8.txt new5.txt new9.txt >actual && + test_cmp expect actual +' + test_done diff --git a/t/t6200-fmt-merge-msg.sh b/t/t6200-fmt-merge-msg.sh index 42f6fff373..42f8ece097 100755 --- a/t/t6200-fmt-merge-msg.sh +++ b/t/t6200-fmt-merge-msg.sh @@ -7,65 +7,69 @@ test_description='fmt-merge-msg test' . ./test-lib.sh -datestamp=1151939923 -setdate () { - GIT_COMMITTER_DATE="$datestamp +0200" - GIT_AUTHOR_DATE="$datestamp +0200" - datestamp=`expr "$datestamp" + 1` - export GIT_COMMITTER_DATE GIT_AUTHOR_DATE -} - test_expect_success setup ' echo one >one && git add one && - setdate && + test_tick && git commit -m "Initial" && + git clone . remote && + echo uno >one && echo dos >two && git add two && - setdate && + test_tick && git commit -a -m "Second" && git checkout -b left && - echo $datestamp >one && - setdate && + echo "c1" >one && + test_tick && git commit -a -m "Common #1" && - echo $datestamp >one && - setdate && + echo "c2" >one && + test_tick && git commit -a -m "Common #2" && git branch right && - echo $datestamp >two && - setdate && + echo "l3" >two && + test_tick && git commit -a -m "Left #3" && - echo $datestamp >two && - setdate && + echo "l4" >two && + test_tick && git commit -a -m "Left #4" && - echo $datestamp >two && - setdate && + echo "l5" >two && + test_tick && git commit -a -m "Left #5" && + git tag tag-l5 && git checkout right && - echo $datestamp >three && + echo "r3" >three && git add three && - setdate && + test_tick && git commit -a -m "Right #3" && + git tag tag-r3 && - echo $datestamp >three && - setdate && + echo "r4" >three && + test_tick && git commit -a -m "Right #4" && - echo $datestamp >three && - setdate && + echo "r5" >three && + test_tick && git commit -a -m "Right #5" && + git checkout -b long && + i=0 && + while test $i -lt 30 + do + test_commit $i one && + i=$(($i+1)) + done && + git show-branch ' @@ -113,7 +117,7 @@ test_expect_success 'merge-msg test #3-1' ' git config merge.log true && git checkout master && - setdate && + test_tick && git fetch . left && git fmt-merge-msg <.git/FETCH_HEAD >actual && @@ -127,7 +131,7 @@ test_expect_success 'merge-msg test #3-2' ' git config merge.summary true && git checkout master && - setdate && + test_tick && git fetch . left && git fmt-merge-msg <.git/FETCH_HEAD >actual && @@ -159,7 +163,7 @@ test_expect_success 'merge-msg test #4-1' ' git config merge.log true && git checkout master && - setdate && + test_tick && git fetch . left right && git fmt-merge-msg <.git/FETCH_HEAD >actual && @@ -173,7 +177,7 @@ test_expect_success 'merge-msg test #4-2' ' git config merge.summary true && git checkout master && - setdate && + test_tick && git fetch . left right && git fmt-merge-msg <.git/FETCH_HEAD >actual && @@ -187,7 +191,7 @@ test_expect_success 'merge-msg test #5-1' ' git config merge.log yes && git checkout master && - setdate && + test_tick && git fetch . left right && git fmt-merge-msg <.git/FETCH_HEAD >actual && @@ -201,7 +205,7 @@ test_expect_success 'merge-msg test #5-2' ' git config merge.summary yes && git checkout master && - setdate && + test_tick && git fetch . left right && git fmt-merge-msg <.git/FETCH_HEAD >actual && @@ -215,7 +219,7 @@ test_expect_success 'merge-msg -F' ' git config merge.summary yes && git checkout master && - setdate && + test_tick && git fetch . left right && git fmt-merge-msg -F .git/FETCH_HEAD >actual && @@ -229,7 +233,7 @@ test_expect_success 'merge-msg -F in subdirectory' ' git config merge.summary yes && git checkout master && - setdate && + test_tick && git fetch . left right && mkdir sub && cp .git/FETCH_HEAD sub/FETCH_HEAD && @@ -240,4 +244,128 @@ test_expect_success 'merge-msg -F in subdirectory' ' test_cmp expected actual ' +test_expect_success 'merge-msg with nothing to merge' ' + + git config --unset-all merge.log + git config --unset-all merge.summary + git config merge.summary yes && + + ( + cd remote && + git checkout -b unrelated && + test_tick && + git fetch origin && + git fmt-merge-msg <.git/FETCH_HEAD >../actual + ) && + + test_cmp /dev/null actual +' + +cat >expected <<\EOF +Merge tag 'tag-r3' + +* tag 'tag-r3': + Right #3 + Common #2 + Common #1 +EOF + +test_expect_success 'merge-msg tag' ' + + git config --unset-all merge.log + git config --unset-all merge.summary + git config merge.summary yes && + + git checkout master && + test_tick && + git fetch . tag tag-r3 && + + git fmt-merge-msg <.git/FETCH_HEAD >actual && + test_cmp expected actual +' + +cat >expected <<\EOF +Merge tags 'tag-r3' and 'tag-l5' + +* tag 'tag-r3': + Right #3 + Common #2 + Common #1 + +* tag 'tag-l5': + Left #5 + Left #4 + Left #3 + Common #2 + Common #1 +EOF + +test_expect_success 'merge-msg two tags' ' + + git config --unset-all merge.log + git config --unset-all merge.summary + git config merge.summary yes && + + git checkout master && + test_tick && + git fetch . tag tag-r3 tag tag-l5 && + + git fmt-merge-msg <.git/FETCH_HEAD >actual && + test_cmp expected actual +' + +cat >expected <<\EOF +Merge branch 'left', tag 'tag-r3' + +* tag 'tag-r3': + Right #3 + Common #2 + Common #1 + +* left: + Left #5 + Left #4 + Left #3 + Common #2 + Common #1 +EOF + +test_expect_success 'merge-msg tag and branch' ' + + git config --unset-all merge.log + git config --unset-all merge.summary + git config merge.summary yes && + + git checkout master && + test_tick && + git fetch . tag tag-r3 left && + + git fmt-merge-msg <.git/FETCH_HEAD >actual && + test_cmp expected actual +' + +cat >expected <<\EOF +Merge branch 'long' + +* long: (35 commits) +EOF + +test_expect_success 'merge-msg lots of commits' ' + + git checkout master && + test_tick && + git fetch . long && + + i=29 && + while test $i -gt 9 + do + echo " $i" && + i=$(($i-1)) + done >>expected && + echo " ..." >>expected + + git fmt-merge-msg <.git/FETCH_HEAD >actual && + test_cmp expected actual +' + test_done diff --git a/t/t6300-for-each-ref.sh b/t/t6300-for-each-ref.sh index 8052c86ad3..7dc8a510c7 100755 --- a/t/t6300-for-each-ref.sh +++ b/t/t6300-for-each-ref.sh @@ -295,6 +295,15 @@ test_expect_success 'Check short upstream format' ' test_cmp expected actual ' +cat >expected <<EOF +67a36f1 +EOF + +test_expect_success 'Check short objectname format' ' + git for-each-ref --format="%(objectname:short)" refs/heads >actual && + test_cmp expected actual +' + test_expect_success 'Check for invalid refname format' ' test_must_fail git for-each-ref --format="%(refname:INVALID)" ' diff --git a/t/t7012-skip-worktree-writing.sh b/t/t7012-skip-worktree-writing.sh index 8d8b1c0e25..582d0b54f1 100755 --- a/t/t7012-skip-worktree-writing.sh +++ b/t/t7012-skip-worktree-writing.sh @@ -136,11 +136,11 @@ test_expect_success 'git-clean, dirty case' ' test_cmp expected result ' -test_expect_failure 'git-apply adds file' false -test_expect_failure 'git-apply updates file' false -test_expect_failure 'git-apply removes file' false -test_expect_failure 'git-mv to skip-worktree' false -test_expect_failure 'git-mv from skip-worktree' false -test_expect_failure 'git-checkout' false +#TODO test_expect_failure 'git-apply adds file' false +#TODO test_expect_failure 'git-apply updates file' false +#TODO test_expect_failure 'git-apply removes file' false +#TODO test_expect_failure 'git-mv to skip-worktree' false +#TODO test_expect_failure 'git-mv from skip-worktree' false +#TODO test_expect_failure 'git-checkout' false test_done diff --git a/t/t7103-reset-bare.sh b/t/t7103-reset-bare.sh index afb55b3a46..1eef93c2b2 100755 --- a/t/t7103-reset-bare.sh +++ b/t/t7103-reset-bare.sh @@ -11,21 +11,26 @@ test_expect_success 'setup non-bare' ' git commit -a -m two ' -test_expect_success 'hard reset requires a worktree' ' +test_expect_success '"hard" reset requires a worktree' ' (cd .git && test_must_fail git reset --hard) ' -test_expect_success 'merge reset requires a worktree' ' +test_expect_success '"merge" reset requires a worktree' ' (cd .git && test_must_fail git reset --merge) ' -test_expect_success 'mixed reset is ok' ' +test_expect_success '"keep" reset requires a worktree' ' + (cd .git && + test_must_fail git reset --keep) +' + +test_expect_success '"mixed" reset is ok' ' (cd .git && git reset) ' -test_expect_success 'soft reset is ok' ' +test_expect_success '"soft" reset is ok' ' (cd .git && git reset --soft) ' @@ -40,19 +45,23 @@ test_expect_success 'setup bare' ' cd bare.git ' -test_expect_success 'hard reset is not allowed in bare' ' +test_expect_success '"hard" reset is not allowed in bare' ' test_must_fail git reset --hard HEAD^ ' -test_expect_success 'merge reset is not allowed in bare' ' +test_expect_success '"merge" reset is not allowed in bare' ' test_must_fail git reset --merge HEAD^ ' -test_expect_success 'mixed reset is not allowed in bare' ' +test_expect_success '"keep" reset is not allowed in bare' ' + test_must_fail git reset --keep HEAD^ +' + +test_expect_success '"mixed" reset is not allowed in bare' ' test_must_fail git reset --mixed HEAD^ ' -test_expect_success 'soft reset is allowed in bare' ' +test_expect_success '"soft" reset is allowed in bare' ' git reset --soft HEAD^ && test "`git show --pretty=format:%s | head -n 1`" = "one" ' diff --git a/t/t7110-reset-merge.sh b/t/t7110-reset-merge.sh index 8704d00196..70cdd8e618 100755 --- a/t/t7110-reset-merge.sh +++ b/t/t7110-reset-merge.sh @@ -3,7 +3,7 @@ # Copyright (c) 2009 Christian Couder # -test_description='Tests for "git reset --merge"' +test_description='Tests for "git reset" with "--merge" and "--keep" options' . ./test-lib.sh @@ -47,6 +47,30 @@ test_expect_success 'reset --merge is ok when switching back' ' # # working index HEAD target working index HEAD # ---------------------------------------------------- +# file1: C C C D --keep D D D +# file2: C D D D --keep C D D +test_expect_success 'reset --keep is ok with changes in file it does not touch' ' + git reset --hard second && + cat file1 >file2 && + git reset --keep HEAD^ && + ! grep 4 file1 && + grep 4 file2 && + test "$(git rev-parse HEAD)" = "$(git rev-parse initial)" && + test -z "$(git diff --cached)" +' + +test_expect_success 'reset --keep is ok when switching back' ' + git reset --keep second && + grep 4 file1 && + grep 4 file2 && + test "$(git rev-parse HEAD)" = "$(git rev-parse second)" && + test -z "$(git diff --cached)" +' + +# The next test will test the following: +# +# working index HEAD target working index HEAD +# ---------------------------------------------------- # file1: B B C D --merge D D D # file2: C D D D --merge C D D test_expect_success 'reset --merge discards changes added to index (1)' ' @@ -78,6 +102,18 @@ test_expect_success 'reset --merge is ok again when switching back (1)' ' # # working index HEAD target working index HEAD # ---------------------------------------------------- +# file1: B B C D --keep (disallowed) +test_expect_success 'reset --keep fails with changes in index in files it touches' ' + git reset --hard second && + echo "line 5" >> file1 && + git add file1 && + test_must_fail git reset --keep HEAD^ +' + +# The next test will test the following: +# +# working index HEAD target working index HEAD +# ---------------------------------------------------- # file1: C C C D --merge D D D # file2: C C D D --merge D D D test_expect_success 'reset --merge discards changes added to index (2)' ' @@ -104,6 +140,30 @@ test_expect_success 'reset --merge is ok again when switching back (2)' ' # # working index HEAD target working index HEAD # ---------------------------------------------------- +# file1: C C C D --keep D D D +# file2: C C D D --keep C D D +test_expect_success 'reset --keep keeps changes it does not touch' ' + git reset --hard second && + echo "line 4" >> file2 && + git add file2 && + git reset --keep HEAD^ && + grep 4 file2 && + test "$(git rev-parse HEAD)" = "$(git rev-parse initial)" && + test -z "$(git diff --cached)" +' + +test_expect_success 'reset --keep keeps changes when switching back' ' + git reset --keep second && + grep 4 file2 && + grep 4 file1 && + test "$(git rev-parse HEAD)" = "$(git rev-parse second)" && + test -z "$(git diff --cached)" +' + +# The next test will test the following: +# +# working index HEAD target working index HEAD +# ---------------------------------------------------- # file1: A B B C --merge (disallowed) test_expect_success 'reset --merge fails with changes in file it touches' ' git reset --hard second && @@ -116,6 +176,22 @@ test_expect_success 'reset --merge fails with changes in file it touches' ' grep file1 err.log | grep "not uptodate" ' +# The next test will test the following: +# +# working index HEAD target working index HEAD +# ---------------------------------------------------- +# file1: A B B C --keep (disallowed) +test_expect_success 'reset --keep fails with changes in file it touches' ' + git reset --hard second && + echo "line 5" >> file1 && + test_tick && + git commit -m "add line 5" file1 && + sed -e "s/line 1/changed line 1/" <file1 >file3 && + mv file3 file1 && + test_must_fail git reset --keep HEAD^ 2>err.log && + grep file1 err.log | grep "not uptodate" +' + test_expect_success 'setup 3 different branches' ' git reset --hard second && git branch branch1 && @@ -156,6 +232,18 @@ test_expect_success '"reset --merge HEAD^" is ok with pending merge' ' # # working index HEAD target working index HEAD # ---------------------------------------------------- +# file1: X U B C --keep (disallowed) +test_expect_success '"reset --keep HEAD^" fails with pending merge' ' + git reset --hard third && + test_must_fail git merge branch1 && + test_must_fail git reset --keep HEAD^ 2>err.log && + grep "middle of a merge" err.log +' + +# The next test will test the following: +# +# working index HEAD target working index HEAD +# ---------------------------------------------------- # file1: X U B B --merge B B B test_expect_success '"reset --merge HEAD" is ok with pending merge' ' git reset --hard third && @@ -166,7 +254,19 @@ test_expect_success '"reset --merge HEAD" is ok with pending merge' ' test -z "$(git diff)" ' -test_expect_success '--merge with added/deleted' ' +# The next test will test the following: +# +# working index HEAD target working index HEAD +# ---------------------------------------------------- +# file1: X U B B --keep (disallowed) +test_expect_success '"reset --keep HEAD" fails with pending merge' ' + git reset --hard third && + test_must_fail git merge branch1 && + test_must_fail git reset --keep HEAD 2>err.log && + grep "middle of a merge" err.log +' + +test_expect_success '--merge is ok with added/deleted merge' ' git reset --hard third && rm -f file2 && test_must_fail git merge branch3 && @@ -180,4 +280,16 @@ test_expect_success '--merge with added/deleted' ' git diff --exit-code --cached ' +test_expect_success '--keep fails with added/deleted merge' ' + git reset --hard third && + rm -f file2 && + test_must_fail git merge branch3 && + ! test -f file2 && + test -f file3 && + git diff --exit-code file3 && + git diff --exit-code branch3 file3 && + test_must_fail git reset --keep HEAD 2>err.log && + grep "middle of a merge" err.log +' + test_done diff --git a/t/t7111-reset-table.sh b/t/t7111-reset-table.sh index de896c948d..ce421ad5ac 100755 --- a/t/t7111-reset-table.sh +++ b/t/t7111-reset-table.sh @@ -44,26 +44,32 @@ A B C D soft A B D A B C D mixed A D D A B C D hard D D D A B C D merge XXXXX +A B C D keep XXXXX A B C C soft A B C A B C C mixed A C C A B C C hard C C C A B C C merge XXXXX +A B C C keep A C C B B C D soft B B D B B C D mixed B D D B B C D hard D D D B B C D merge D D D +B B C D keep XXXXX B B C C soft B B C B B C C mixed B C C B B C C hard C C C B B C C merge C C C +B B C C keep B C C B C C D soft B C D B C C D mixed B D D B C C D hard D D D B C C D merge XXXXX +B C C D keep XXXXX B C C C soft B C C B C C C mixed B C C B C C C hard C C C B C C C merge B C C +B C C C keep B C C EOF test_expect_success 'setting up branches to test with unmerged entries' ' @@ -104,10 +110,12 @@ X U B C soft XXXXX X U B C mixed X C C X U B C hard C C C X U B C merge C C C +X U B C keep XXXXX X U B B soft XXXXX X U B B mixed X B B X U B B hard B B B X U B B merge B B B +X U B B keep XXXXX EOF test_done diff --git a/t/t7201-co.sh b/t/t7201-co.sh index d20ed61b48..1337fa5a22 100755 --- a/t/t7201-co.sh +++ b/t/t7201-co.sh @@ -11,10 +11,12 @@ Test switching across them. ! [master] Initial A one, A two * [renamer] Renamer R one->uno, M two ! [side] Side M one, D two, A three - --- - + [side] Side M one, D two, A three - * [renamer] Renamer R one->uno, M two - +*+ [master] Initial A one, A two + ! [simple] Simple D one, M two + ---- + + [simple] Simple D one, M two + + [side] Side M one, D two, A three + * [renamer] Renamer R one->uno, M two + +*++ [master] Initial A one, A two ' @@ -52,6 +54,11 @@ test_expect_success setup ' git update-index --add --remove one two three && git commit -m "Side M one, D two, A three" && + git checkout -b simple master && + rm -f one && + fill a c e > two && + git commit -a -m "Simple D one, M two" && + git checkout master ' @@ -166,6 +173,56 @@ test_expect_success 'checkout -m with merge conflict' ' ! test -s current ' +test_expect_success 'format of merge conflict from checkout -m' ' + + git checkout -f master && git clean -f && + + fill b d > two && + git checkout -m simple && + + git ls-files >current && + fill same two two two >expect && + test_cmp current expect && + + cat <<-EOF >expect && + <<<<<<< simple + a + c + e + ======= + b + d + >>>>>>> local + EOF + test_cmp two expect +' + +test_expect_success 'checkout --merge --conflict=diff3 <branch>' ' + + git checkout -f master && git reset --hard && git clean -f && + + fill b d > two && + git checkout --merge --conflict=diff3 simple && + + cat <<-EOF >expect && + <<<<<<< simple + a + c + e + ||||||| master + a + b + c + d + e + ======= + b + d + >>>>>>> local + EOF + test_cmp two expect +' + test_expect_success 'checkout to detach HEAD (with advice declined)' ' git config advice.detachedHead false && @@ -481,7 +538,7 @@ test_expect_success 'checkout with --merge, in diff3 -m style' ' ( echo "<<<<<<< ours" echo ourside - echo "|||||||" + echo "||||||| base" echo original echo "=======" echo theirside @@ -525,7 +582,7 @@ test_expect_success 'checkout --conflict=diff3' ' ( echo "<<<<<<< ours" echo ourside - echo "|||||||" + echo "||||||| base" echo original echo "=======" echo theirside diff --git a/t/t7500-commit.sh b/t/t7500-commit.sh index 9f5c3edb03..aa9c577e9e 100755 --- a/t/t7500-commit.sh +++ b/t/t7500-commit.sh @@ -193,4 +193,26 @@ test_expect_success 'commit -F overrides -t' ' commit_msg_is "-F log" ' +test_expect_success 'Commit without message is allowed with --allow-empty-message' ' + echo "more content" >>foo && + git add foo && + >empty && + git commit --allow-empty-message <empty && + commit_msg_is "" +' + +test_expect_success 'Commit without message is no-no without --allow-empty-message' ' + echo "more content" >>foo && + git add foo && + >empty && + test_must_fail git commit <empty +' + +test_expect_success 'Commit a message with --allow-empty-message' ' + echo "even more content" >>foo && + git add foo && + git commit --allow-empty-message -m"hello there" && + commit_msg_is "hello there" +' + test_done diff --git a/t/t7501-commit.sh b/t/t7501-commit.sh index 7940901d47..8297cb4f1e 100755 --- a/t/t7501-commit.sh +++ b/t/t7501-commit.sh @@ -425,4 +425,16 @@ test_expect_success 'amend using the message from a commit named with tag' ' ' +test_expect_success 'amend can copy notes' ' + + git config notes.rewrite.amend true && + git config notes.rewriteRef "refs/notes/*" && + test_commit foo && + git notes add -m"a note" && + test_tick && + git commit --amend -m"new foo" && + test "$(git notes show)" = "a note" + +' + test_done diff --git a/t/t7506-status-submodule.sh b/t/t7506-status-submodule.sh index 253c334319..3d4f85d74f 100755 --- a/t/t7506-status-submodule.sh +++ b/t/t7506-status-submodule.sh @@ -34,7 +34,7 @@ test_expect_success 'status with modified file in submodule' ' (cd sub && git reset --hard) && echo "changed" >sub/foo && git status >output && - grep "modified: sub" output + grep "modified: sub (modified content)" output ' test_expect_success 'status with modified file in submodule (porcelain)' ' @@ -49,7 +49,7 @@ test_expect_success 'status with modified file in submodule (porcelain)' ' test_expect_success 'status with added file in submodule' ' (cd sub && git reset --hard && echo >foo && git add foo) && git status >output && - grep "modified: sub" output + grep "modified: sub (modified content)" output ' test_expect_success 'status with added file in submodule (porcelain)' ' @@ -64,7 +64,12 @@ test_expect_success 'status with untracked file in submodule' ' (cd sub && git reset --hard) && echo "content" >sub/new-file && git status >output && - grep "modified: sub" output + grep "modified: sub (untracked content)" output +' + +test_expect_success 'status -uno with untracked file in submodule' ' + git status -uno >output && + grep "^nothing to commit" output ' test_expect_success 'status with untracked file in submodule (porcelain)' ' @@ -74,6 +79,100 @@ test_expect_success 'status with untracked file in submodule (porcelain)' ' EOF ' +test_expect_success 'status with added and untracked file in submodule' ' + (cd sub && git reset --hard && echo >foo && git add foo) && + echo "content" >sub/new-file && + git status >output && + grep "modified: sub (modified content, untracked content)" output +' + +test_expect_success 'status with added and untracked file in submodule (porcelain)' ' + (cd sub && git reset --hard && echo >foo && git add foo) && + echo "content" >sub/new-file && + git status --porcelain >output && + diff output - <<-\EOF + M sub + EOF +' + +test_expect_success 'status with modified file in modified submodule' ' + (cd sub && git reset --hard) && + rm sub/new-file && + (cd sub && echo "next change" >foo && git commit -m "next change" foo) && + echo "changed" >sub/foo && + git status >output && + grep "modified: sub (new commits, modified content)" output +' + +test_expect_success 'status with modified file in modified submodule (porcelain)' ' + (cd sub && git reset --hard) && + echo "changed" >sub/foo && + git status --porcelain >output && + diff output - <<-\EOF + M sub + EOF +' + +test_expect_success 'status with added file in modified submodule' ' + (cd sub && git reset --hard && echo >foo && git add foo) && + git status >output && + grep "modified: sub (new commits, modified content)" output +' + +test_expect_success 'status with added file in modified submodule (porcelain)' ' + (cd sub && git reset --hard && echo >foo && git add foo) && + git status --porcelain >output && + diff output - <<-\EOF + M sub + EOF +' + +test_expect_success 'status with untracked file in modified submodule' ' + (cd sub && git reset --hard) && + echo "content" >sub/new-file && + git status >output && + grep "modified: sub (new commits, untracked content)" output +' + +test_expect_success 'status with untracked file in modified submodule (porcelain)' ' + git status --porcelain >output && + diff output - <<-\EOF + M sub + EOF +' + +test_expect_success 'status with added and untracked file in modified submodule' ' + (cd sub && git reset --hard && echo >foo && git add foo) && + echo "content" >sub/new-file && + git status >output && + grep "modified: sub (new commits, modified content, untracked content)" output +' + +test_expect_success 'status with added and untracked file in modified submodule (porcelain)' ' + (cd sub && git reset --hard && echo >foo && git add foo) && + echo "content" >sub/new-file && + git status --porcelain >output && + diff output - <<-\EOF + M sub + EOF +' + +test_expect_success 'setup .git file for sub' ' + (cd sub && + rm -f new-file + REAL="$(pwd)/../.real" && + mv .git "$REAL" + echo "gitdir: $REAL" >.git) && + echo .real >>.gitignore && + git commit -m "added .real to .gitignore" .gitignore +' + +test_expect_success 'status with added file in modified submodule with .git file' ' + (cd sub && git reset --hard && echo >foo && git add foo) && + git status >output && + grep "modified: sub (new commits, modified content)" output +' + test_expect_success 'rm submodule contents' ' rm -rf sub/* sub/.git ' diff --git a/t/t7508-status.sh b/t/t7508-status.sh index 556d0faa77..a9df7ff7bd 100755 --- a/t/t7508-status.sh +++ b/t/t7508-status.sh @@ -496,6 +496,16 @@ test_expect_success 'dry-run of partial commit excluding new file in index' ' test_cmp expect output ' +cat >expect <<EOF +:100644 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0000000000000000000000000000000000000000 M dir1/modified +EOF +test_expect_success 'status refreshes the index' ' + touch dir2/added && + git status && + git diff-files >output && + test_cmp expect output +' + test_expect_success 'setup status submodule summary' ' test_create_repo sm && ( cd sm && @@ -693,4 +703,19 @@ test_expect_success 'commit --dry-run submodule summary (--amend)' ' test_cmp expect output ' +test_expect_success POSIXPERM 'status succeeds in a read-only repository' ' + ( + chmod a-w .git && + # make dir1/tracked stat-dirty + >dir1/tracked1 && mv -f dir1/tracked1 dir1/tracked && + git status -s >output && + ! grep dir1/tracked output && + # make sure "status" succeeded without writing index out + git diff-files | grep dir1/tracked + ) + status=$? + chmod 775 .git + (exit $status) +' + test_done diff --git a/t/t7600-merge.sh b/t/t7600-merge.sh index 57f6d2bae7..cde8390c1b 100755 --- a/t/t7600-merge.sh +++ b/t/t7600-merge.sh @@ -554,8 +554,7 @@ test_debug 'gitk --all' test_expect_success 'refresh the index before merging' ' git reset --hard c1 && - sleep 1 && - touch file && + cp file file.n && mv -f file.n file && git merge c3 ' diff --git a/t/t7800-difftool.sh b/t/t7800-difftool.sh index 19c72f55bf..1de83ef98f 100755 --- a/t/t7800-difftool.sh +++ b/t/t7800-difftool.sh @@ -92,6 +92,15 @@ test_expect_success 'difftool honors --gui' ' restore_test_defaults ' +test_expect_success 'difftool --gui works without configured diff.guitool' ' + git config diff.tool test-tool && + + diff=$(git difftool --no-prompt --gui branch) && + test "$diff" = "branch" && + + restore_test_defaults +' + # Specify the diff tool using $GIT_DIFF_TOOL test_expect_success 'GIT_DIFF_TOOL variable' ' git config --unset diff.tool diff --git a/t/t9118-git-svn-funky-branch-names.sh b/t/t9118-git-svn-funky-branch-names.sh index ac52bff0ef..7d7acc30b4 100755 --- a/t/t9118-git-svn-funky-branch-names.sh +++ b/t/t9118-git-svn-funky-branch-names.sh @@ -21,6 +21,14 @@ test_expect_success 'setup svnrepo' ' "$svnrepo/pr ject/branches/more fun plugin!" && svn_cmd cp -m "scary" "$svnrepo/pr ject/branches/fun plugin" \ "$svnrepo/pr ject/branches/$scary_uri" && + svn_cmd cp -m "leading dot" "$svnrepo/pr ject/trunk" \ + "$svnrepo/pr ject/branches/.leading_dot" && + svn_cmd cp -m "trailing dot" "$svnrepo/pr ject/trunk" \ + "$svnrepo/pr ject/branches/trailing_dot." && + svn_cmd cp -m "trailing .lock" "$svnrepo/pr ject/trunk" \ + "$svnrepo/pr ject/branches/trailing_dotlock.lock" && + svn_cmd cp -m "reflog" "$svnrepo/pr ject/trunk" \ + "$svnrepo/pr ject/branches/not-a@{0}reflog" && start_httpd ' @@ -30,6 +38,10 @@ test_expect_success 'test clone with funky branch names' ' git rev-parse "refs/remotes/fun%20plugin" && git rev-parse "refs/remotes/more%20fun%20plugin!" && git rev-parse "refs/remotes/$scary_ref" && + git rev-parse "refs/remotes/%2Eleading_dot" && + git rev-parse "refs/remotes/trailing_dot%2E" && + git rev-parse "refs/remotes/trailing_dotlock%2Elock" && + git rev-parse "refs/remotes/not-a%40{0}reflog" && cd .. ' @@ -51,6 +63,15 @@ test_expect_success 'test dcommit to scary branch' ' cd .. ' +test_expect_success 'test dcommit to trailing_dotlock branch' ' + cd project && + git reset --hard "refs/remotes/trailing_dotlock%2Elock" && + echo who names branches like this anyway? >> foo && + git commit -m "bar" -- foo && + git svn dcommit && + cd .. + ' + stop_httpd test_done diff --git a/t/t9350-fast-export.sh b/t/t9350-fast-export.sh index 356964e53a..d43f37ccaf 100755 --- a/t/t9350-fast-export.sh +++ b/t/t9350-fast-export.sh @@ -150,20 +150,22 @@ test_expect_success 'setup submodule' ' git checkout -f master && mkdir sub && - cd sub && - git init && - echo test file > file && - git add file && - git commit -m sub_initial && - cd .. && + ( + cd sub && + git init && + echo test file > file && + git add file && + git commit -m sub_initial + ) && git submodule add "`pwd`/sub" sub && git commit -m initial && test_tick && - cd sub && - echo more data >> file && - git add file && - git commit -m sub_second && - cd .. && + ( + cd sub && + echo more data >> file && + git add file && + git commit -m sub_second + ) && git add sub && git commit -m second @@ -264,19 +266,20 @@ test_expect_success 'cope with tagger-less tags' ' test_expect_success 'setup for limiting exports by PATH' ' mkdir limit-by-paths && - cd limit-by-paths && - git init && - echo hi > there && - git add there && - git commit -m "First file" && - echo foo > bar && - git add bar && - git commit -m "Second file" && - git tag -a -m msg mytag && - echo morefoo >> bar && - git add bar && - git commit -m "Change to second file" && - cd .. + ( + cd limit-by-paths && + git init && + echo hi > there && + git add there && + git commit -m "First file" && + echo foo > bar && + git add bar && + git commit -m "Second file" && + git tag -a -m msg mytag && + echo morefoo >> bar && + git add bar && + git commit -m "Change to second file" + ) ' cat > limit-by-paths/expected << EOF @@ -297,10 +300,11 @@ M 100644 :1 there EOF test_expect_success 'dropping tag of filtered out object' ' +( cd limit-by-paths && git fast-export --tag-of-filtered-object=drop mytag -- there > output && - test_cmp output expected && - cd .. + test_cmp output expected +) ' cat >> limit-by-paths/expected << EOF @@ -313,10 +317,11 @@ msg EOF test_expect_success 'rewriting tag of filtered out object' ' +( cd limit-by-paths && git fast-export --tag-of-filtered-object=rewrite mytag -- there > output && - test_cmp output expected && - cd .. + test_cmp output expected +) ' cat > limit-by-paths/expected << EOF @@ -343,13 +348,13 @@ M 100644 :2 there EOF test_expect_failure 'no exact-ref revisions included' ' - cd limit-by-paths && - git fast-export master~2..master~1 > output && - test_cmp output expected && - cd .. + ( + cd limit-by-paths && + git fast-export master~2..master~1 > output && + test_cmp output expected + ) ' - test_expect_success 'set-up a few more tags for tag export tests' ' git checkout -f master && HEAD_TREE=`git show -s --pretty=raw HEAD | grep tree | sed "s/tree //"` && diff --git a/t/t9501-gitweb-standalone-http-status.sh b/t/t9501-gitweb-standalone-http-status.sh index d196cc5ca9..2487da1296 100755 --- a/t/t9501-gitweb-standalone-http-status.sh +++ b/t/t9501-gitweb-standalone-http-status.sh @@ -15,9 +15,10 @@ code and message.' # ---------------------------------------------------------------------- # snapshot settings -test_commit \ - 'SnapshotTests' \ - 'i can has snapshot?' +test_expect_success 'setup' " + test_commit 'SnapshotTests' 'i can has snapshot?' +" + cat >>gitweb_config.perl <<\EOF $feature{'snapshot'}{'override'} = 0; diff --git a/t/test-lib.sh b/t/test-lib.sh index a0e396a952..7422bba47e 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -2,6 +2,18 @@ # # Copyright (c) 2005 Junio C Hamano # +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see http://www.gnu.org/licenses/ . # if --tee was passed, write the output not only to the terminal, but # additionally to the file test-results/$BASENAME.out, too. @@ -54,6 +66,10 @@ unset GIT_OBJECT_DIRECTORY unset GIT_CEILING_DIRECTORIES unset SHA1_FILE_DIRECTORIES unset SHA1_FILE_DIRECTORY +unset GIT_NOTES_REF +unset GIT_NOTES_DISPLAY_REF +unset GIT_NOTES_REWRITE_REF +unset GIT_NOTES_REWRITE_MODE GIT_MERGE_VERBOSITY=5 export GIT_MERGE_VERBOSITY export GIT_AUTHOR_EMAIL GIT_AUTHOR_NAME @@ -350,8 +366,10 @@ test_debug () { } test_run_ () { + test_cleanup=: eval >&3 2>&4 "$1" - eval_ret="$?" + eval_ret=$? + eval >&3 2>&4 "$test_cleanup" return 0 } @@ -529,6 +547,31 @@ test_cmp() { $GIT_TEST_CMP "$@" } +# This function can be used to schedule some commands to be run +# unconditionally at the end of the test to restore sanity: +# +# test_expect_success 'test core.capslock' ' +# git config core.capslock true && +# test_when_finished "git config --unset core.capslock" && +# hello world +# ' +# +# That would be roughly equivalent to +# +# test_expect_success 'test core.capslock' ' +# git config core.capslock true && +# hello world +# git config --unset core.capslock +# ' +# +# except that the greeting and config --unset must both succeed for +# the test to pass. + +test_when_finished () { + test_cleanup="{ $* + } && (exit \"\$eval_ret\"); eval_ret=\$?; $test_cleanup" +} + # Most tests can use the created repository, but some may need to create more. # Usage: test_create_repo <directory> test_create_repo () { |