| Age | Commit message (Collapse) | Author |
|---|
|
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since there is no implementation of the function 'git_config_iter',
let's stop exporting it and remove the prototype from config.h.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move all config related declarations from cache.h to a new config.h
header file. This makes cache.h smaller and allows for the opportunity
in a following patch to only include config.h when needed.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of discovering the .git/ directory, reading the config and then
trying to painstakingly reset all the global state if we did not find a
matching alias, let's use the early config machinery instead.
It may look like unnecessary work to discover the .git/ directory in the
early config machinery and then call setup_git_directory_gently() in the
case of a shell alias, repeating the very same discovery *again*.
However, we have to do this as the early config machinery takes pains
*not* to touch any global state, while shell aliases expect a possibly
changed working directory and at least the GIT_PREFIX and GIT_DIR
variables to be set.
This change also fixes a known issue where Git tried to read the pager
config from an incorrect path in a subdirectory of a Git worktree if an
alias expanded to a shell command.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When expanding aliases, the git_dir is set during the alias expansion
(by virtue of running setup_git_directory_gently()).
This git_dir may be relative to the current working directory, and
indeed often is simply ".git/".
When the alias expands to a shell command, we restore the original
working directory, though, yet we do not reset git_dir.
As a consequence, subsequent read_early_config() runs will mistake the
git_dir to be populated properly and not find the correct config.
Demonstrate this problem by adding a test case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We are about to change the way aliases are expanded, to use the early
config machinery.
This machinery reports errors in a slightly different manner than the
cached config machinery.
Let's not get hung up by the precise wording of the message mentioning
the line number. It is really sufficient to verify that all the relevant
information is given to the user.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git has this feature which suggests similar commands (including aliases)
in case the user specified an unknown command.
This feature currently relies on a side effect of the way we expand
aliases right now: when a command is not a builtin, we use the regular
config machinery (meaning: discovering the .git/ directory and
initializing global state such as the config cache) to see whether the
command refers to an alias.
However, we will change the way aliases are expanded in the next
commits, to use the early config instead. That means that the
autocorrect feature can no longer discover the available aliases by
looking at the config cache (because it has not yet been initialized).
So let's just use the early config machinery instead.
This is slightly less performant than the previous way, as the early
config is used *twice*: once to see whether the command refers to an
alias, and then to see what aliases are most similar. However, this is
hardly a performance-critical code path, so performance is less important
here.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When get_value() parses a key/value pair, it is possible that the line
number is decreased (because the \n has been consumed already) before the
key/value pair is passed to the callback function, to allow for the
correct line to be attributed in case of an error.
However, when git_parse_source() asks get_value() to parse the key/value
pair, the error reporting is performed *after* get_value() returns.
Which means that we have to be careful not to increase the line number
in get_value() after the callback function returned an error.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When discovering a .git/ directory, we take pains to ensure that its
repository format version matches Git's expectations, and we return NULL
otherwise.
However, we still appended the invalid path to the strbuf passed as
argument.
Let's just reset the strbuf to the state before we appended the .git/
directory that was eventually rejected.
There is another early return path in that function, when
setup_git_directory_gently_1() returns GIT_DIR_NONE or an error. In that
case, the gitdir parameter has not been touched, therefore there is no
need for an equivalent change in that code path.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
l10n for Git 2.13.0 round 2.1
* tag 'l10n-2.13.0-rnd2.1' of git://github.com/git-l10n/git-po:
l10n: zh_CN: for git v2.13.0 l10n round 2
l10n: sv.po: Update Swedish translation (3195t0f0u)
l10n: zh_CN: review for git v2.13.0 l10n round 1
l10n: Update Catalan translation
l10n: bg.po: Updated Bulgarian translation (3195t)
l10n: fr.po v2.13 rnd 2
l10n: de.po: translate 4 new messages
l10n: de.po: update German translation
l10n: de.po: lower case after semi-colon
l10n: vi.po(3195t): Update translation for v2.13.0 round 2
l10n: git.pot: v2.13.0 round 2 (4 new, 7 removed)
l10n: zh_CN: for git v2.13.0 l10n round 1
l10n: fr.po v2.13 round 1
l10n: pt_PT: update Portuguese translation
l10n: bg.po: Updated Bulgarian translation (3201t)
l10n: vi.po(3198t): Updated Vietnamese translation for v2.13.0-rc0
l10n: sv.po: Update Swedish translation (3199t0f0u)
l10n: git.pot: v2.13.0 round 1 (96 new, 37 removed)
|
|
* 'master' of git://github.com/nafmo/git-l10n-sv:
l10n: sv.po: Update Swedish translation (3195t0f0u)
|
|
Translate 4 messages (3195t0f0u) for git v2.13.0-rc2.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jh/verify-index-checksum-only-in-fsck:
t1450: avoid use of "sed" on the index, which is a binary file
|
|
Signed-off-by: Ray Chen <oldsharp@gmail.com>
|
|
* 'master' of https://github.com/vnwildman/git:
l10n: vi.po(3195t): Update translation for v2.13.0 round 2
|
|
Signed-off-by: Jordi Mas <jmas@softcatala.org>
|
|
Signed-off-by: Alexander Shopov <ash@kambanaria.org>
|
|
* 'fr_l10n_v2.13_rnd2' of git://github.com/jnavila/git:
l10n: fr.po v2.13 rnd 2
|
|
Signed-off-by: Jean-Noel Avila <jn.avila@free.fr>
|
|
Translate 4 new messages came from git.pot update in 28e1aaa48 (l10n:
git.pot: v2.13.0 round 2 (4 new, 7 removed)).
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Acked-by: Matthias Rüster <matthias.ruester@gmail.com>
|
|
Translate 96 new messages came from git.pot update in dfc182b (l10n:
git.pot: v2.13.0 round 1 (96 new, 37 removed)).
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Acked-by: Matthias Rüster <matthias.ruester@gmail.com>
|
|
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
|
|
Signed-off-by: Tran Ngoc Quan <vnwildman@gmail.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/shell-no-repository-that-begins-with-dash:
shell: disallow repo names beginning with dash
|
|
When a remote server uses git-shell, the client side will
connect to it like:
ssh server "git-upload-pack 'foo.git'"
and we literally exec ("git-upload-pack", "foo.git"). In
early versions of upload-pack and receive-pack, we took a
repository argument and nothing else. But over time they
learned to accept dashed options. If the user passes a
repository name that starts with a dash, the results are
confusing at best (we complain of a bogus option instead of
a non-existent repository) and malicious at worst (the user
can start an interactive pager via "--help").
We could pass "--" to the sub-process to make sure the
user's argument is interpreted as a branch name. I.e.:
git-upload-pack -- -foo.git
But adding "--" automatically would make us inconsistent
with a normal shell (i.e., when git-shell is not in use),
where "-foo.git" would still be an error. For that case, the
client would have to specify the "--", but they can't do so
reliably, as existing versions of git-shell do not allow
more than a single argument.
The simplest thing is to simply disallow "-" at the start of
the repo name argument. This hasn't worked either with or
without git-shell since version 1.0.0, and nobody has
complained.
Note that this patch just applies to do_generic_cmd(), which
runs upload-pack, receive-pack, and upload-archive. There
are two other types of commands that git-shell runs:
- do_cvs_cmd(), but this already restricts the argument to
be the literal string "server"
- admin-provided commands in the git-shell-commands
directory. We'll pass along arbitrary arguments there,
so these commands could have similar problems. But these
commands might actually understand dashed arguments, so
we cannot just block them here. It's up to the writer of
the commands to make sure they are safe. With great
power comes great responsibility.
Reported-by: Timo Schmid <tschmid@ernw.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Generate po/git.pot from v2.13.0-rc2 for git v2.13.0 l10n round 2.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
* 'master' of git://github.com/git-l10n/git-po:
l10n: zh_CN: for git v2.13.0 l10n round 1
l10n: fr.po v2.13 round 1
l10n: pt_PT: update Portuguese translation
l10n: bg.po: Updated Bulgarian translation (3201t)
l10n: vi.po(3198t): Updated Vietnamese translation for v2.13.0-rc0
l10n: sv.po: Update Swedish translation (3199t0f0u)
l10n: git.pot: v2.13.0 round 1 (96 new, 37 removed)
|
|
Translate 96 messages (3198t0f0u) for git v2.13.0-rc0.
Reviewed-by: 依云 <lilydjwg@gmail.com>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
* 'fr_l10n_v2.13_rnd1' of git://github.com/jnavila/git:
l10n: fr.po v2.13 round 1
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
