Age | Commit message (Collapse) | Author |
|
Define the logical elements of a "bundle list", data structure to
store them in-core, format to transfer them, and code to parse
them.
* ds/bundle-uri-3:
bundle-uri: suppress stderr from remote-https
bundle-uri: quiet failed unbundlings
bundle: add flags to verify_bundle()
bundle-uri: fetch a list of bundles
bundle: properly clear all revision flags
bundle-uri: limit recursion depth for bundle lists
bundle-uri: parse bundle list in config format
bundle-uri: unit test "key=value" parsing
bundle-uri: create "key=value" line parsing
bundle-uri: create base key-value pair parsing
bundle-uri: create bundle_list struct and helpers
bundle-uri: use plain string in find_temp_filename()
|
|
There will be two primary ways to advertise a bundle list: as a list of
packet lines in Git's protocol v2 and as a config file served from a
bundle URI. Both of these fundamentally use a list of key-value pairs.
We will use the same set of key-value pairs across these formats.
Create a new bundle_list_update() method that is currently unusued, but
will be used in the next change. It inspects each key to see if it is
understood and then applies it to the given bundle_list. Here are the
keys that we teach Git to understand:
* bundle.version: This value should be an integer. Git currently
understands only version 1 and will ignore the list if the version is
any other value. This version can be increased in the future if we
need to add new keys that Git should not ignore. We can add new
"heuristic" keys without incrementing the version.
* bundle.mode: This value should be one of "all" or "any". If this
mode is not understood, then Git will ignore the list. This mode
indicates whether Git needs all of the bundle list items to make a
complete view of the content or if any single item is sufficient.
The rest of the keys use a bundle identifier "<id>" as part of the key
name. Keys using the same "<id>" describe a single bundle list item.
* bundle.<id>.uri: This stores the URI of the bundle item. This
currently is expected to be an absolute URI, but will be relaxed to be
a relative URI in the future.
While parsing, return an error if a URI key is repeated, since we can
make that restriction with bundle lists.
Make the git_parse_int() method global so we can parse the integer
version value carefully.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add documentation for 'fsmonitor.allowRemote' and 'fsmonitor.socketDir'.
Call-out experimental nature of 'fsmonitor.allowRemote' and limited
filesystem support for 'fsmonitor.socketDir'.
Signed-off-by: Eric DeCosta <edecosta@mathworks.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add missing documentation for "include" and "includeIf" features in
"git config" file format, which incidentally teaches the command
line completion to include them in its offerings.
* mb/config-document-include:
config.txt: document include, includeIf
|
|
Git config's tab completion does not yet know about the "include"
and "includeIf" sections, nor the related "path" variable.
Add a description for these two sections in
'Documentation/config/includeif.txt', which points to git-config's
documentation, specifically the "Includes" and "Conditional Includes"
subsections.
As a side effect, tab completion can successfully complete the
'include', 'includeIf', and 'include.add' expressions.
This effect is tested by two new ad-hoc tests.
Variable completion only works for "include" for now.
Credit for the ideas behind this patch goes to
Ævar Arnfjörð Bjarmason.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Manuel Boni <ziosombrero@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
43966ab315 (revert: optionally refer to commit in the "reference"
format, 2022-05-26) added the documentation file config/revert.txt.
Actually include it in config.txt.
Make is used with a bare infinitive after the object; remove the "to".
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
* maint-2.34:
Git 2.34.2
Git 2.33.2
Git 2.32.1
Git 2.31.2
GIT-VERSION-GEN: bump to v2.33.1
Git 2.30.3
setup_git_directory(): add an owner check for the top-level directory
Add a function to determine whether a path is owned by the current user
|
|
* maint-2.33:
Git 2.33.2
Git 2.32.1
Git 2.31.2
GIT-VERSION-GEN: bump to v2.33.1
Git 2.30.3
setup_git_directory(): add an owner check for the top-level directory
Add a function to determine whether a path is owned by the current user
|
|
* maint-2.30:
Git 2.30.3
setup_git_directory(): add an owner check for the top-level directory
Add a function to determine whether a path is owned by the current user
|
|
Remove the 'reset.quiet' config option, remove '--no-quiet' documentation in
'Documentation/git-reset.txt'. In 4c3abd0551 (reset: add new reset.quiet
config setting, 2018-10-23), 'reset.quiet' was introduced as a way to
globally change the default behavior of 'git reset --mixed' to skip index
refresh.
However, now that '--quiet' does not affect index refresh, 'reset.quiet'
would only serve to globally silence logging. This was not the original
intention of the config setting, and there's no precedent for such a setting
in other commands with a '--quiet' option, so it appears to be obsolete.
In addition to the options & its documentation, remove 'reset.quiet' from
the recommended config for 'scalar'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It poses a security risk to search for a git directory outside of the
directories owned by the current user.
For example, it is common e.g. in computer pools of educational
institutes to have a "scratch" space: a mounted disk with plenty of
space that is regularly swiped where any authenticated user can create
a directory to do their work. Merely navigating to such a space with a
Git-enabled `PS1` when there is a maliciously-crafted `/scratch/.git/`
can lead to a compromised account.
The same holds true in multi-user setups running Windows, as `C:\` is
writable to every authenticated user by default.
To plug this vulnerability, we stop Git from accepting top-level
directories owned by someone other than the current user. We avoid
looking at the ownership of each and every directories between the
current and the top-level one (if there are any between) to avoid
introducing a performance bottleneck.
This new default behavior is obviously incompatible with the concept of
shared repositories, where we expect the top-level directory to be owned
by only one of its legitimate users. To re-enable that use case, we add
support for adding exceptions from the new default behavior via the
config setting `safe.directory`.
The `safe.directory` config setting is only respected in the system and
global configs, not from repository configs or via the command-line, and
can have multiple values to allow for multiple shared repositories.
We are particularly careful to provide a helpful message to any user
trying to use a shared repository.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
|
|
In sparse-checkouts, files mis-marked as missing from the working tree
could lead to later problems. Such files were hard to discover, and
harder to correct. Automatically detecting and correcting the marking
of such files has been added to avoid these problems.
* en/present-despite-skipped:
repo_read_index: add config to expect files outside sparse patterns
Accelerate clear_skip_worktree_from_present_files() by caching
Update documentation related to sparsity and the skip-worktree bit
repo_read_index: clear SKIP_WORKTREE bit from files present in worktree
unpack-trees: fix accidental loss of user changes
t1011: add testcase demonstrating accidental loss of user modifications
|
|
Typically with sparse checkouts, we expect files outside the sparsity
patterns to be marked as SKIP_WORKTREE and be missing from the working
tree. Sometimes this expectation would be violated however; including
in cases such as:
* users grabbing files from elsewhere and writing them to the worktree
(perhaps by editing a cached copy in an editor, copying/renaming, or
even untarring)
* various git commands having incomplete or no support for the
SKIP_WORKTREE bit[1,2]
* users attempting to "abort" a sparse-checkout operation with a
not-so-early Ctrl+C (updating $GIT_DIR/info/sparse-checkout and the
working tree is not atomic)[3].
When the SKIP_WORKTREE bit in the index did not reflect the presence of
the file in the working tree, it traditionally caused confusion and was
difficult to detect and recover from. So, in a sparse checkout, since
af6a51875a (repo_read_index: clear SKIP_WORKTREE bit from files present
in worktree, 2022-01-14), Git automatically clears the SKIP_WORKTREE
bit at index read time for entries corresponding to files that are
present in the working tree.
There is another workflow, however, where it is expected that paths
outside the sparsity patterns appear to exist in the working tree and
that they do not lose the SKIP_WORKTREE bit, at least until they get
modified. A Git-aware virtual file system[4] takes advantage of its
position as a file system driver to expose all files in the working
tree, fetch them on demand using partial clone on access, and tell Git
to pay attention to them on demand by updating the sparse checkout
pattern on writes. This means that commands like "git status" only have
to examine files that have potentially been modified, whereas commands
like "ls" are able to show the entire codebase without requiring manual
updates to the sparse checkout pattern.
Thus since af6a51875a, Git with such Git-aware virtual file systems
unsets the SKIP_WORKTREE bit for all files and commands like "git
status" have to fetch and examine them all.
Introduce a configuration setting sparse.expectFilesOutsideOfPatterns to
allow limiting the tracked set of files to a small set once again. A
Git-aware virtual file system or other application that wants to
maintain files outside of the sparse checkout can set this in a
repository to instruct Git not to check for the presence of
SKIP_WORKTREE files. The setting defaults to false, so most users of
sparse checkout will still get the benefit of an automatically updating
index to recover from the variety of difficult issues detailed in
af6a51875a for paths with SKIP_WORKTREE set despite the path being
present.
[1] https://lore.kernel.org/git/xmqqbmb1a7ga.fsf@gitster-ct.c.googlers.com/
[2] The three long paragraphs in the middle of
https://lore.kernel.org/git/CABPp-BH9tju7WVm=QZDOvaMDdZbpNXrVWQdN-jmfN8wC6YVhmw@mail.gmail.com/
[3] https://lore.kernel.org/git/CABPp-BFnFpzwGC11TLoLs8YK5yiisA5D5-fFjXnJsbESVDwZsA@mail.gmail.com/
[4] such as the vfsd described in
https://lore.kernel.org/git/20220207190320.2960362-1-jonathantanmy@google.com/
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The conditional inclusion mechanism of configuration files using
"[includeIf <condition>]" learns to base its decision on the
URL of the remote repository the repository interacts with.
* jt/conditional-config-on-remote-url:
config: include file if remote URL matches a glob
config: make git_config_include() static
|
|
This is a feature that supports config file inclusion conditional on
whether the repo has a remote with a URL that matches a glob.
Similar to my previous work on remote-suggested hooks [1], the main
motivation is to allow remote repo administrators to provide recommended
configs in a way that can be consumed more easily (e.g. through a
package installable by a package manager - it could, for example,
contain a file to be included conditionally and a post-install script
that adds the include directive to the system-wide config file).
In order to do this, Git reruns the config parsing mechanism upon
noticing the first URL-conditional include in order to find all remote
URLs, and these remote URLs are then used to determine if that first and
all subsequent includes are executed. Remote URLs are not allowed to be
configued in any URL-conditionally-included file.
[1] https://lore.kernel.org/git/cover.1623881977.git.jonathantanmy@google.com/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Acked-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"default" and "reset" colors have been added to our palette.
* re/color-default-reset:
color: allow colors to be prefixed with "reset"
color: support "default" to restore fg/bg color
color: add missing GIT_COLOR_* white/black constants
|
|
"reset" was previously treated as a standalone special color name
representing `\e[m`. Now, it can apply to other color properties,
allowing exact specifications without implicit attribute inheritance.
For example, "reset green" now renders `\e[;32m`, which is interpreted
as "reset everything; then set foreground to green". This means the
background and other attributes are also reset to their defaults.
Previously, this was impossible to represent in a single color:
"reset" could be specified alone, or a color with attributes, but some
thing like clearing a background color were impossible.
There is a separate change that introduces the "default" color name to
assist with that, but even then, the above could only to be represented
by explicitly disabling each of the attributes:
green default no-bold no-dim no-italic no-ul no-blink no-reverse no-strike
Signed-off-by: Robert Estelle <robertestelle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The name "default" can now be used in foreground or background colors,
and means to use the terminal's default color, discarding any
explicitly-set color without affecting the other attributes. On many
modern terminals, this is *not* the same as specifying "white" or
"black".
Although attributes could previously be cleared like "no-bold", there
had not been a similar mechanism available for colors, other than a full
"reset", which cannot currently be combined with other settings.
Note that this is *not* the same as the existing name "normal", which is
a no-op placeholder to permit setting the background without changing
the foreground. (i.e. what is currently called "normal" might have been
more descriptively named "inherit", "none", "pass" or similar).
Signed-off-by: Robert Estelle <robertestelle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix the spelling of "substituted".
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ever since Git learned to detect its install location at runtime, there
was the slightly awkward problem that it was impossible to specify paths
relative to said location.
For example, if a version of Git was shipped with custom SSL
certificates to use, there was no portable way to specify
`http.sslCAInfo`.
In Git for Windows, the problem was "solved" for years by interpreting
paths starting with a slash as relative to the runtime prefix.
However, this is not correct: such paths _are_ legal on Windows, and
they are interpreted as absolute paths in the same drive as the current
directory.
After a lengthy discussion, and an even lengthier time to mull over the
problem and its best solution, and then more discussions, we eventually
decided to introduce support for the magic sequence `%(prefix)/`. If a
path starts with this, the remainder is interpreted as relative to the
detected (runtime) prefix. If built without runtime prefix support, Git
will simply interpolate the compiled-in prefix.
If a user _wants_ to specify a path starting with the magic sequence,
they can prefix the magic sequence with `./` and voilà, the path won't
be expanded.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Docfix.
* km/config-doc-typofix:
config.txt: add missing period
|
|
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When cloning, we choose the default branch based on the remote HEAD.
But if there is no remote HEAD reported (which could happen if the
target of the remote HEAD is unborn), we'll fall back to using our local
init.defaultBranch. Traditionally this hasn't been a big deal, because
most repos used "master" as the default. But these days it is likely to
cause confusion if the server and client implementations choose
different values (e.g., if the remote started with "main", we may choose
"master" locally, create commits there, and then the user is surprised
when they push to "master" and not "main").
To solve this, the remote needs to communicate the target of the HEAD
symref, even if it is unborn, and "git clone" needs to use this
information.
Currently, symrefs that have unborn targets (such as in this case) are
not communicated by the protocol. Teach Git to advertise and support the
"unborn" feature in "ls-refs" (by default, this is advertised, but
server administrators may turn this off through the lsrefs.unborn
config). This feature indicates that "ls-refs" supports the "unborn"
argument; when it is specified, "ls-refs" will send the HEAD symref with
the name of its unborn target.
This change is only for protocol v2. A similar change for protocol v0
would require independent protocol design (there being no analogous
position to signal support for "unborn") and client-side plumbing of the
data required, so the scope of this patch set is limited to protocol v2.
The client side will be updated to use this in a subsequent commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix for an old typo.
* sn/config-doc-typofix:
config.txt: fix a typo (backslash != backquote)
|
|
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Docfix.
* mc/typofix:
doc: fixing two trivial typos in Documentation/
|
|
Fix misspelled "specified" and "occurred" in documentation and
comments.
Signed-off-by: Marlon Rac Cambasis <marlonrc08@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git clone" learned clone.defaultremotename configuration variable
to customize what nickname to use to call the remote the repository
was cloned from.
* sb/clone-origin:
clone: allow configurable default for `-o`/`--origin`
clone: read new remote name from remote_name instead of option_origin
clone: validate --origin option before use
refs: consolidate remote name validation
remote: add tests for add and rename with invalid names
clone: use more conventional config/option layering
clone: add tests for --template and some disallowed option pairs
|
|
While the default remote name of "origin" can be changed at clone-time
with `git clone`'s `--origin` option, it was previously not possible
to specify a default value for the name of that remote. Add support for
a new `clone.defaultRemoteName` config, with the newly-created remote
name resolved in priority order:
1. (Highest priority) A remote name passed directly to `git clone -o`
2. A `clone.defaultRemoteName=new_name` in config `git clone -c`
3. A `clone.defaultRemoteName` value set in `/path/to/template/config`,
where `--template=/path/to/template` is provided
4. A `clone.defaultRemoteName` value set in a non-template config file
5. The default value of `origin`
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Derrick Stolee <stolee@gmail.com>
Helped-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Sean Barag <sean@barag.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git commit-graph write" learned to limit the number of bloom
filters that are computed from scratch with the --max-new-filters
option.
* tb/bloom-improvements:
commit-graph: introduce 'commitGraph.maxNewFilters'
builtin/commit-graph.c: introduce '--max-new-filters=<n>'
commit-graph: rename 'split_commit_graph_opts'
bloom: encode out-of-bounds filters as non-empty
bloom/diff: properly short-circuit on max_changes
bloom: use provided 'struct bloom_filter_settings'
bloom: split 'get_bloom_filter()' in two
commit-graph.c: store maximum changed paths
commit-graph: respect 'commitGraph.readChangedPaths'
t/helper/test-read-graph.c: prepare repo settings
commit-graph: pass a 'struct repository *' in more places
t4216: use an '&&'-chain
commit-graph: introduce 'get_bloom_filter_settings()'
|
|
Currently, a normal run of "git maintenance run" will only run the 'gc'
task, as it is the only one enabled. This is mostly for backwards-
compatible reasons since "git maintenance run --auto" commands replaced
previous "git gc --auto" commands after some Git processes. Users could
manually run specific maintenance tasks by calling "git maintenance run
--task=<task>" directly.
Allow users to customize which steps are run automatically using config.
The 'maintenance.<task>.enabled' option then can turn on these other
tasks (or turn off the 'gc' task).
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git uses the 'core.commitGraph' configuration value to control whether
or not the commit graph is used when parsing commits or performing a
traversal.
Now that commit-graphs can also contain a section for changed-path Bloom
filters, administrators that already have commit-graphs may find it
convenient to use those graphs without relying on their changed-path
Bloom filters. This can happen, for example, during a staged roll-out,
or in the event of an incident.
Introduce 'commitGraph.readChangedPaths' to control whether or not Bloom
filters are read. Note that this configuration is independent from both:
- 'core.commitGraph', to allow flexibility in using all parts of a
commit-graph _except_ for its Bloom filters.
- The '--changed-paths' option for 'git commit-graph write', to allow
reading and writing Bloom filters to be controlled independently.
When the variable is set, pretend as if no Bloom data was specified at
all. This avoids adding additional special-casing outside of the
commit-graph internals.
Suggested-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Document the extensions.objectFormat config setting. Warn users not to
modify it themselves.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Docfix.
* mt/doc-worktree-ref:
config doc: fix reference to config.worktree info
|
|
356aea6 ("doc: move extensions.worktreeConfig to the right place",
2018-11-14) moved the explanation of extension.worktreeConfig from
config.txt to technical/repository-version.txt. However, the former
still contains a reference to the removed paragraph. We could fix it
referencing the gitrepository-layout man page, which contains the moved
explanation. But the git-worktree man page has additional information
and recommendations for the worktree config file, so let's reference it
instead.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc update.
* ma/config-doc-fix:
config.txt: move closing "----" to cover entire listing
|
|
Commit 1925fe0c8a ("Documentation: wrap config listings in "----"",
2019-09-07) wrapped this fairly large block of example config directives
in "----". The closing "----" ended up a few lines too early though.
Make sure to include the trailing "IncludeIf.onbranch:..." example, too.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Improve the structure of the documentation source a bit.
* jc/config-tar:
separate tar.* config to its own source file
|
|
Even though there is only one configuration variable in the
namespace, it is not quite right to have tar.umask described
among the variables for tag.* namespace.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These colors are the bright variants of the 3-bit colors. Instead of
30-37 range for the foreground and 40-47 range for the background,
they live in 90-97 and 100-107 range, respectively.
Signed-off-by: Eyal Soha <shawarmakarma@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reported-by: Jens Schleusener <Jens.Schleusener@fossies.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc formatting updates.
* ma/asciidoctor-more-fixes:
gitweb.conf.txt: switch pluses to backticks to help Asciidoctor
git-merge-index.txt: wrap shell listing in "----"
git-receive-pack.txt: wrap shell [script] listing in "----"
git-ls-remote.txt: wrap shell listing in "----"
Documentation: wrap config listings in "----"
git-merge-base.txt: render indentations correctly under Asciidoctor
Documentation: wrap blocks with "--"
|
|
The indented lines in these example config-file listings are indented
differently by AsciiDoc and Asciidoctor.
Fix this by marking the example config-files as code listings by
wrapping them in "----". Because this gives us some extra indentation,
we can remove the one that we have been carrying explicitly. That is,
drop the first tab of indentation on each line.
With AsciiDoc, this results in identical rendering before and after this
commit. Asciidoctor now renders this the same as AsciiDoc does.
git-config.txt pretty consistently uses twelve dashes rather than the
minimum four to spell "----". Let's stick to the file-local convention
there.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The feature.manyFiles setting is suitable for repos with many
files in the working directory. By setting index.version=4 and
core.untrackedCache=true, commands such as 'git status' should
improve.
While adding this setting, modify the index version precedence
tests to check how this setting overrides the default for
index.version is unset.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, if a user wishes to have individual settings per branch, they
are required to manually keep track of the settings in their head and
manually set the options on the command-line or change the config at
each branch.
Teach config the "onbranch:" includeIf condition so that it can
conditionally include configuration files if the branch that is checked
out in the current worktree matches the pattern given.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All config extensions are described in technical/repository-version.txt.
I made a mistake of adding it in config.txt instead. This patch moves
it back to where it belongs.
Since repository-version.txt is not part of officially generated
documents (it's not even part of DOC_HTML target), it's only visible
to developers who read plain .txt files. Let's include it in
gitrepository-layout.5 for more visibility. Some minor asciidoc fixes
are required in repository-version.txt to make this happen.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A fourth class of configuration files (in addition to the
traditional "system wide", "per user in the $HOME directory" and
"per repository in the $GIT_DIR/config") has been introduced so
that different worktrees that share the same repository (hence the
same $GIT_DIR/config file) can use different customization.
* nd/per-worktree-config:
worktree: add per-worktree config files
t1300: extract and use test_cmp_config()
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|