Age | Commit message (Collapse) | Author |
|
Taking advantage of the CGI interface, http-backend has been
updated to enable protocol v2 automatically when the other side
asks for it.
* jk/http-server-protocol-versions:
docs/protocol-v2: point readers transport config discussion
docs/git: discuss server-side config for GIT_PROTOCOL
docs/http-backend: mention v2 protocol
http-backend: handle HTTP_GIT_PROTOCOL CGI variable
t5551: test v2-to-v0 http protocol fallback
|
|
When "git am --abort" fails to abort correctly, it still exited
with exit status of 0, which has been corrected.
* en/am-abort-fix:
am: fix incorrect exit status on am fail to abort
t4151: add a few am --abort tests
git-am.txt: clarify --abort behavior
|
|
Fix a bug in the --config option that's been there ever since its
introduction in 3ac68a93fd2 (help: add --config to list all available
config, 2018-05-26). Die when --all and --config are combined,
combining them doesn't make sense.
The code for the --config option when combined with an earlier
refactoring done to support the --guide option in
65f98358c0c (builtin/help.c: add --guide option, 2013-04-02) would
cause us to take the "--all" branch early and ignore the --config
option.
Let's instead list these as incompatible, both in the synopsis and
help output, and enforce it in the code itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As noted in 65f98358c0c (builtin/help.c: add --guide option,
2013-04-02) and a133737b809 (doc: include --guide option description
for "git help", 2013-04-02) which introduced the --guide option, it
cannot be combined with e.g. <command>.
Change the command and the "SYNOPSIS" section to reflect that desired
behavior. Now that we assert this in code we don't need to
exhaustively describe the previous confusing behavior in the
documentation either, instead of silently ignoring the provided
argument we'll now error out.
The "We're done. Ignore any remaining args" comment added in
15f7d494380 (builtin/help.c: split "-a" processing into two,
2013-04-02) can now be removed, it's obvious that we're asserting the
behavior with the check of "argc".
The "--config" option is still missing from the synopsis, it will be
added in a subsequent commit where we'll fix bugs in its
implementation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the "Sending v2" section, readers are directed to create v2 patches
without using --range-diff. However, it is customary to include a
range-diff against the v1 patches as a reviewer aid.
Update the "Sending v2" section to suggest a simple workflow that uses
the --range-diff option. Also include some explanation for -v2 and
--range-diff to help the reader understand the importance.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a similar spirit as the previous patch, let sub-commands which
support showing or hiding a progress meter handle parsing the
`--progress` or `--no-progress` option, but do not expose it as an
option to the top-level `multi-pack-index` builtin.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In cone mode, the sparse-index code path learned to remove ignored
files (like build artifacts) outside the sparse cone, allowing the
entire directory outside the sparse cone to be removed, which is
especially useful when the sparse patterns change.
* ds/sparse-index-ignored-files:
sparse-checkout: clear tracked sparse dirs
sparse-index: add SPARSE_INDEX_MEMORY_ONLY flag
attr: be careful about sparse directories
sparse-checkout: create helper methods
sparse-index: use WRITE_TREE_MISSING_OK
sparse-index: silently return when cache tree fails
unpack-trees: fix nested sparse-dir search
sparse-index: silently return when not using cone-mode patterns
t7519: rewrite sparse index test
|
|
Code clean-up around "git serve".
* ab/serve-cleanup:
upload-pack: document and rename --advertise-refs
serve.[ch]: remove "serve_options", split up --advertise-refs code
{upload,receive}-pack tests: add --advertise-refs tests
serve.c: move version line to advertise_capabilities()
serve: move transfer.advertiseSID check into session_id_advertise()
serve.[ch]: don't pass "struct strvec *keys" to commands
serve: use designated initializers
transport: use designated initializers
transport: rename "fetch" in transport_vtable to "fetch_refs"
serve: mark has_capability() as static
|
|
Add progress display to "git bundle unbundle".
* ab/unbundle-progress:
bundle: show progress on "unbundle"
index-pack: add --progress-title option
bundle API: change "flags" to be "extra_index_pack_args"
bundle API: start writing API documentation
|
|
"git maintenance" scheduler learned to use systemd timers as a
possible backend.
* lh/systemd-timers:
maintenance: add support for systemd timers on Linux
maintenance: `git maintenance run` learned `--scheduler=<scheduler>`
cache.h: Introduce a generic "xdg_config_home_for(…)" function
|
|
The reachability bitmap file used to be generated only for a single
pack, but now we've learned to generate bitmaps for history that
span across multiple packfiles.
* tb/multi-pack-bitmaps: (29 commits)
pack-bitmap: drop bitmap_index argument from try_partial_reuse()
pack-bitmap: drop repository argument from prepare_midx_bitmap_git()
p5326: perf tests for MIDX bitmaps
p5310: extract full and partial bitmap tests
midx: respect 'GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP'
t7700: update to work with MIDX bitmap test knob
t5319: don't write MIDX bitmaps in t5319
t5310: disable GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP
t0410: disable GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP
t5326: test multi-pack bitmap behavior
t/helper/test-read-midx.c: add --checksum mode
t5310: move some tests to lib-bitmap.sh
pack-bitmap: write multi-pack bitmaps
pack-bitmap: read multi-pack bitmaps
pack-bitmap.c: avoid redundant calls to try_partial_reuse
pack-bitmap.c: introduce 'bitmap_is_preferred_refname()'
pack-bitmap.c: introduce 'nth_bitmap_object_oid()'
pack-bitmap.c: introduce 'bitmap_num_objects()'
midx: avoid opening multiple MIDXs when writing
midx: close linked MIDXs, avoid leaking memory
...
|
|
* en/am-abort-fix:
am: fix incorrect exit status on am fail to abort
t4151: add a few am --abort tests
git-am.txt: clarify --abort behavior
|
|
The configuration option `rebase.forkpoint' is only mentioned in the man
page of git-config(1). Since it is a configuration for rebase, mention
it in the documentation of rebase at the --fork-point/--no-fork-point
section. This will help users set a preferred default for their
workflow.
Signed-off-by: Wesley Schwengle <wesley@opperschaap.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Create "child_ready" event to capture the state of a child process
created in the background.
When a child command is started a "child_start" event is generated in
the Trace2 log. For normal synchronous children, a "child_exit" event
is later generated when the child exits or is terminated. The two events
include information, such as the "child_id" and "pid", to allow post
analysis to match-up the command line and exit status.
When a child is started in the background (and may outlive the parent
process), it is not possible for the parent to emit a "child_exit"
event. Create a new "child_ready" event to indicate whether the
child was successfully started. Also include the "child_id" and "pid"
to allow similar post processing.
This will be used in a later commit with the new "start_bg_command()".
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a few typos and alignment issues, and while at it update the
example hashes to show most of the ones available in recent crypt(3).
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
c057bad370 (git-cvsserver: use a password file cvsserver pserver,
2010-05-15) adds a way for `git cvsserver` to provide authenticated
pserver accounts without having clear text passwords, but uses the
username instead of the password to the call for crypt(3).
Correct that, and make sure the documentation correctly indicates how
to obtain hashed passwords that could be used to populate this
configuration, as well as correcting the hash that was used for the
tests.
This change will require that any user of this feature updates the
hashes in their configuration, but has the advantage of using a more
similar format than cvs uses, probably also easying any migration.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Docfix.
* bs/doc-bugreport-outdir:
Documentation: fix default directory of git bugreport -o
|
|
We've never documented the fact that a client can provide multiple
ref-prefix capabilities. Let's describe the behavior.
We also never discussed the "best effort" nature of the prefixes. The
client side of git.git has always treated them this way, filtering the
result with local patterns. And indeed any client must do this, because
the prefix patterns are not sufficient to express the usual refspecs
(and so for "foo" we ask for "refs/heads/foo", "refs/tags/foo", and so
on).
So this may be considered a change in the spec with respect to client
expectations / requirements, but it's mostly codifying existing
behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the previous commit, the bitmap writing code learned to propagate
values from an existing hash-cache extension into the bitmap that it is
writing.
Now that that functionality exists, let's expose it by teaching the 'git
multi-pack-index' builtin to respect the `pack.writeBitmapHashCache`
option so that the hash-cache may be written at all.
Two minor points worth noting here:
- The 'git multi-pack-index write' sub-command didn't previously read
any configuration (instead this is handled in the base command). A
separate handler is added here to respect this write-specific
config option.
- I briefly considered adding a 'bitmap_flags' field to the static
options struct, but decided against it since it would require
plumbing through a new parameter to the write_midx_file() function.
Instead, a new MIDX-specific flag is added, which is translated to
the corresponding bitmap one.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ab/serve-cleanup:
upload-pack: document and rename --advertise-refs
serve.[ch]: remove "serve_options", split up --advertise-refs code
{upload,receive}-pack tests: add --advertise-refs tests
serve.c: move version line to advertise_capabilities()
serve: move transfer.advertiseSID check into session_id_advertise()
serve.[ch]: don't pass "struct strvec *keys" to commands
serve: use designated initializers
transport: use designated initializers
transport: rename "fetch" in transport_vtable to "fetch_refs"
serve: mark has_capability() as static
|
|
While 'git version' is probably the least complex git command,
it is a non-experimental user-facing builtin command. As such
it should have a help page.
Both `git help` and `git version` can be called as options
(`--help`/`--version`) that internally get converted to the
corresponding command. Add a small paragraph to
Documentation/git.txt describing how these two options
interact with each other and link to this help page for the
sub-options that `--version` can take. Well, currently there
is only one sub-option, but that could potentially increase
in future versions of Git.
Signed-off-by: Matthias Aßhauer <mha1993@live.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `git help` command gained the ability to list config variables in
3ac68a93fd (help: add --config to list all available config, 2018-05-26)
but failed to tell readers of the config documenation itself.
Provide that cross reference.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As was noted in 1a85b49b87a (parse-options: make OPT_ARGUMENT() more
useful, 2019-03-14) there's only ever been one user of the
OPT_ARGUMENT(), that user was added in 20de316e334 (difftool: allow
running outside Git worktrees with --no-index, 2019-03-14).
The OPT_ARGUMENT() feature itself was added way back in
580d5bffdea (parse-options: new option type to treat an option-like
parameter as an argument., 2008-03-02), but as discussed in
1a85b49b87a wasn't used until 20de316e334 in 2019.
Now that the preceding commit has migrated this code over to using
"struct strvec" to manage the "args" member of a "struct
child_process", we can just use that directly instead of relying on
OPT_ARGUMENT.
This has a minor change in behavior in that if we'll pass --no-index
we'll now always pass it as the first argument, before we'd pass it in
whatever position the caller did. Preserving this was the real value
of OPT_ARGUMENT(), but as it turns out we didn't need that either. We
can always inject it as the first argument, the other end will parse
it just the same.
Note that we cannot remove the "out" and "cpidx" members of "struct
parse_opt_ctx_t" added in 580d5bffdea, while they were introduced with
OPT_ARGUMENT() we since used them for other things.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "send-pack" was changed to use the parse_options() API in
068c77a5189 (builtin/send-pack.c: use parse_options API, 2015-08-19)
it was made to use one very long line, instead it should split them up
with newlines.
Furthermore we were including an inline explanation that you couldn't
combine "--all" and "<ref>", but unlike in the "blame" case this was
not preceded by an empty string.
Let's instead show that --all and <ref> can't be combined in the the
usual language of the usage syntax instead. We can make it clear that
one of the two options "--foo" and "--bar" is mandatory, but that the
two are mutually exclusive by referring to them as "( --foo | --bar
)".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Clarify the usage string in the documentation so we group e.g. -i and
--info, and add the missing short options to the "-h" output.
The alignment of the second line is off now, but will be fixed with
another series of mine[1]. In the meantime let's just assume that fix
will make it in eventually for the purposes of this patch, if it's
misaligned for a bit it doesn't matter much.
1. https://lore.kernel.org/git/cover-0.2-00000000000-20210901T110917Z-avarab@gmail.com
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both Johannes and I assumed (perhaps due to familiarity with rebase)
that am --abort would return the user to a clean state. However, since
am, unlike rebase, is intended to be used within a dirty working tree,
--abort will only clean the files involved in the am operation.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We recently added tips for server admins to configure various transports
to support v2's GIT_PROTOCOL variable. While the protocol-v2 document is
pretty technical and not of interest to most admins, it may be a
starting point for them to figure out how to turn on v2. Let's put some
pointers from there to the other documentation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The v2 protocol requires that the GIT_PROTOCOL environment variable gets
passed around, but we don't have any documentation describing how this
is supposed to work. In particular, we need to note what server admins
might need to configure to make things work.
The definition of the GIT_PROTOCOL variable is probably the best place
for this, since:
- we deal with multiple transports (ssh, http, etc).
Transport-specific documentation (like the git-http-backend bits
added in the previous commit) are helpful for those transports, but
this gives a broader overview. Plus we do not have a specific
transport endpoint program for ssh, so this is a reasonable place to
mention it.
- the server side of the protocol involves multiple programs. For now,
upload-pack is the only endpoint which uses GIT_PROTOCOL, but that
will likely expand in the future. We're better off with a central
discussion of what the server admin might need to do. However, for
discoverability, this patch adds a pointer from upload-pack's
documentation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Historically there was a little bit of configuration needed at the
webserver level in order to get the client's v2 protocol probes to Git.
But when we introduced the v2 protocol, we never documented these.
As of the previous commit, this should mostly work out of the box
without any explicit configuration. But it's worth documenting this to
make it clear how we expect it to work, especially in the face of
webservers which don't provide all headers over the CGI interface. Or
anybody who runs across this documentation but has an older version of
Git (or _used_ to have an older version, and wonders why they still have
a SetEnvIf line in their Apache config and whether it's still
necessary).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The logic for auto-correction of misspelt subcommands learned to go
interactive when the help.autocorrect configuration variable is set
to 'prompt'.
* ab/help-autocorrect-prompt:
help.c: help.autocorrect=prompt waits for user action
|
|
Doc update plus improved error reporting.
* jk/log-warn-on-bogus-encoding:
docs: use "character encoding" to refer to commit-object encoding
logmsg_reencode(): warn when iconv() fails
|
|
Typofix.
* es/walken-tutorial-fix:
doc: fix syntax error and the format of printf
|
|
"git upload-pack" which runs on the other side of "git fetch"
forgot to take the ref namespaces into account when handling
want-ref requests.
* ka/want-ref-in-namespace:
docs: clarify the interaction of transfer.hideRefs and namespaces
upload-pack.c: treat want-ref relative to namespace
t5730: introduce fetch command helper
|
|
"git rebase" by default skips changes that are equivalent to
commits that are already in the history the branch is rebased onto;
give messages when this happens to let the users be aware of
skipped commits, and also teach them how to tell "rebase" to keep
duplicated changes.
* js/advise-when-skipping-cherry-picked:
sequencer: advise if skipping cherry-picked commit
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The parser for the "--nl" option of "git column" has been
corrected.
* sg/column-nl:
column: fix parsing of the '--nl' option
|
|
"git branch -D <branch>" used to refuse to remove a broken branch
ref that points at a missing commit, which has been corrected.
* rs/branch-allow-deleting-dangling:
branch: allow deleting dangling branches with --force
|
|
When changing the scope of a sparse-checkout using cone mode, we might
have some tracked directories go out of scope. The current logic removes
the tracked files from within those directories, but leaves the ignored
files within those directories. This is a bit unexpected to users who
have given input to Git saying they don't need those directories
anymore.
This is something that is new to the cone mode pattern type: the user
has explicitly said "I want these directories and _not_ those
directories." The typical sparse-checkout patterns more generally apply
to "I want files with with these patterns" so it is natural to leave
ignored files as they are. This focus on directories in cone mode
provides us an opportunity to change the behavior.
Leaving these ignored files in the sparse directories makes it
impossible to gain performance benefits in the sparse index. When we
track into these directories, we need to know if the files are ignored
or not, which might depend on the _tracked_ .gitignore file(s) within
the sparse directory. This depends on the indexed version of the file,
so the sparse directory must be expanded.
We must take special care to look for untracked, non-ignored files in
these directories before deleting them. We do not want to delete any
meaningful work that the users were doing in those directories and
perhaps forgot to add and commit before switching sparse-checkout
definitions. Since those untracked files might be code files that
generated ignored build output, also do not delete any ignored files
from these directories in that case. The users can recover their state
by resetting their sparse-checkout definition to include that directory
and continue. Alternatively, they can see the warning that is presented
and delete the directory themselves to regain the performance they
expect.
By deleting the sparse directories when changing scope (or running 'git
sparse-checkout reapply') we regain these performance benefits as if the
repository was in a clean state.
Since these ignored files are frequently build output or helper files
from IDEs, the users should not need the files now that the tracked
files are removed. If the tracked files reappear, then they will have
newer timestamps than the build artifacts, so the artifacts will need to
be regenerated anyway.
Use the sparse-index as a data structure in order to find the sparse
directories that can be safely deleted. Re-expand the index to a full
one if it was full before.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git bugreport writes bug report to the current directory by default,
instead of repository root.
Fix the documentation.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "unbundle" command added in 2e0afafebd8 (Add git-bundle: move
objects and references by archive, 2007-02-22) did not show progress
output, even though the underlying API learned how to show progress in
be042aff24c (Teach progress eye-candy to fetch_refs_from_bundle(),
2011-09-18).
Now we'll show "Unbundling objects" using the new --progress-title
option to "git index-pack", to go with its existing "Receiving
objects" and "Indexing objects" (which it shows when invoked with
"--stdin", and with a pack file, respectively).
Unlike "git bundle create" we don't handle "--quiet" here, nor
"--all-progress" and "--all-progress-implied". Those are all specific
to "create" (and "verify", in the case of "--quiet").
The structure of the existing documentation is a bit unclear, e.g. the
documentation for the "--quiet" option added in
79862b6b77c (bundle-create: progress output control, 2019-11-10) only
describes how it works for "create", and not for "verify". That and
other issues in it should be fixed, but I'd like to avoid untangling
that mess right now. Let's just support the standard "--no-progress"
implicitly here, and leave cleaning up the general behavior of "git
bundle" for a later change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a --progress-title option to index-pack, when data is piped into
index-pack its progress is a proxy for whatever's feeding it data.
This option will allow us to set a more relevant progress bar title in
"git bundle unbundle", and is also used in my "bundle-uri" RFC
patches[1] by a new caller in fetch-pack.c.
The code change in cmd_index_pack() won't handle
"--progress-title=xyz", only "--progress-title xyz", and the "(i+1)"
style (as opposed to "i + 1") is a bit odd.
Not using the "--long-option=value" style is inconsistent with
existing long options handled by cmd_index_pack(), but makes the code
that needs to call it better (two strvec_push(), instead of needing a
strvec_pushf()). Since the option is internal-only the inconsistency
shouldn't matter.
I'm copying the pattern to handle it as-is from the handling of the
existing "-o" option in the same function, see 9cf6d3357aa (Add
git-index-pack utility, 2005-10-12) for its addition. That's a short
option, but the code to implement the two is the same in functionality
and style. Eventually we'd like to migrate all of this this to
parse_options(), which would make these differences in behavior go
away.
1. https://lore.kernel.org/git/RFC-cover-00.13-0000000000-20210805T150534Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The existing mechanism for scheduling background maintenance is done
through cron. On Linux systems managed by systemd, systemd provides an
alternative to schedule recurring tasks: systemd timers.
The main motivations to implement systemd timers in addition to cron
are:
* cron is optional and Linux systems running systemd might not have it
installed.
* The execution of `crontab -l` can tell us if cron is installed but not
if the daemon is actually running.
* With systemd, each service is run in its own cgroup and its logs are
tagged by the service inside journald. With cron, all scheduled tasks
are running in the cron daemon cgroup and all the logs of the
user-scheduled tasks are pretended to belong to the system cron
service.
Concretely, a user that doesn’t have access to the system logs won’t
have access to the log of their own tasks scheduled by cron whereas
they will have access to the log of their own tasks scheduled by
systemd timer.
Although `cron` attempts to send email, that email may go unseen by
the user because these days, local mailboxes are not heavily used
anymore.
In order to schedule git maintenance, we need two unit template files:
* ~/.config/systemd/user/git-maintenance@.service
to define the command to be started by systemd and
* ~/.config/systemd/user/git-maintenance@.timer
to define the schedule at which the command should be run.
Those units are templates that are parameterized by the frequency.
Based on those templates, 3 timers are started:
* git-maintenance@hourly.timer
* git-maintenance@daily.timer
* git-maintenance@weekly.timer
The command launched by those three timers are the same as with the
other scheduling methods:
/path/to/git for-each-repo --exec-path=/path/to
--config=maintenance.repo maintenance run --schedule=%i
with the full path for git to ensure that the version of git launched
for the scheduled maintenance is the same as the one used to run
`maintenance start`.
The timer unit contains `Persistent=true` so that, if the computer is
powered down when a maintenance task should run, the task will be run
when the computer is back powered on.
Signed-off-by: Lénaïc Huard <lenaic@lhuard.fr>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Depending on the system, different schedulers can be used to schedule
the hourly, daily and weekly executions of `git maintenance run`:
* `launchctl` for MacOS,
* `schtasks` for Windows and
* `crontab` for everything else.
`git maintenance run` now has an option to let the end-user explicitly
choose which scheduler he wants to use:
`--scheduler=auto|crontab|launchctl|schtasks`.
When `git maintenance start --scheduler=XXX` is run, it not only
registers `git maintenance run` tasks in the scheduler XXX, it also
removes the `git maintenance run` tasks from all the other schedulers to
ensure we cannot have two schedulers launching concurrent identical
tasks.
The default value is `auto` which chooses a suitable scheduler for the
system.
`git maintenance stop` doesn't have any `--scheduler` parameter because
this command will try to remove the `git maintenance run` tasks from all
the available schedulers.
Signed-off-by: Lénaïc Huard <lenaic@lhuard.fr>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The revision traversal API has been optimized by taking advantage
of the commit-graph, when available, to determine if a commit is
reachable from any of the existing refs.
* ps/connectivity-optim:
revision: avoid hitting packfiles when commits are in commit-graph
commit-graph: split out function to search commit position
revision: stop retrieving reference twice
connected: do not sort input revisions
revision: separate walk and unsorted flags
|
|
Write multi-pack bitmaps in the format described by
Documentation/technical/bitmap-format.txt, inferring their presence with
the absence of '--bitmap'.
To write a multi-pack bitmap, this patch attempts to reuse as much of
the existing machinery from pack-objects as possible. Specifically, the
MIDX code prepares a packing_data struct that pretends as if a single
packfile has been generated containing all of the objects contained
within the MIDX.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Opening multiple instance of the same MIDX can lead to problems like two
separate packed_git structures which represent the same pack being added
to the repository's object store.
The above scenario can happen because prepare_midx_pack() checks if
`m->packs[pack_int_id]` is NULL in order to determine if a pack has been
opened and installed in the repository before. But a caller can
construct two copies of the same MIDX by calling get_multi_pack_index()
and load_multi_pack_index() since the former manipulates the
object store directly but the latter is a lower-level routine which
allocates a new MIDX for each call.
So if prepare_midx_pack() is called on multiple MIDXs with the same
pack_int_id, then that pack will be installed twice in the object
store's packed_git pointer.
This can lead to problems in, for e.g., the pack-bitmap code, which does
something like the following (in pack-bitmap.c:open_pack_bitmap()):
struct bitmap_index *bitmap_git = ...;
for (p = get_all_packs(r); p; p = p->next) {
if (open_pack_bitmap_1(bitmap_git, p) == 0)
ret = 0;
}
which is a problem if two copies of the same pack exist in the
packed_git list because pack-bitmap.c:open_pack_bitmap_1() contains a
conditional like the following:
if (bitmap_git->pack || bitmap_git->midx) {
/* ignore extra bitmap file; we can only handle one */
warning("ignoring extra bitmap file: %s", packfile->pack_name);
close(fd);
return -1;
}
Avoid this scenario by not letting write_midx_internal() open a MIDX
that isn't also pointed at by the object store. So long as this is the
case, other routines should prefer to open MIDXs with
get_multi_pack_index() or reprepare_packed_git() instead of creating
instances on their own. Because get_multi_pack_index() returns
`r->object_store->multi_pack_index` if it is non-NULL, we'll only have
one instance of a MIDX open at one time, avoiding these problems.
To encourage this, drop the `struct multi_pack_index *` parameter from
`write_midx_internal()`, and rely instead on the `object_dir` to find
(or initialize) the correct MIDX instance.
Likewise, replace the call to `close_midx()` with
`close_object_store()`, since we're about to replace the MIDX with a new
one and should invalidate the object store's memory of any MIDX that
might have existed beforehand.
Note that this now forbids passing object directories that don't belong
to alternate repositories over `--object-dir`, since before we would
have happily opened a MIDX in any directory, but now restrict ourselves
to only those reachable by `r->objects->multi_pack_index` (and alternate
MIDXs that we can see by walking the `next` pointer).
As far as I can tell, supporting arbitrary directories with
`--object-dir` was a historical accident, since even the documentation
says `<alt>` when referring to the value passed to this option.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|