| Age | Commit message (Collapse) | Author |
|---|
|
"git format-patch" learns to take "whenAble" as a possible value
for the format.useAutoBase configuration variable to become no-op
when the automatically computed base does not make sense.
* jk/format-auto-base-when-able:
format-patch: teach format.useAutoBase "whenAble" option
|
|
"git shortlog" has been taught to group commits by the contents of
the trailer lines, like "Reviewed-by:", "Coauthored-by:", etc.
* jk/shortlog-group-by-trailer:
shortlog: allow multiple groups to be specified
shortlog: parse trailer idents
shortlog: rename parse_stdin_ident()
shortlog: de-duplicate trailer values
shortlog: match commit trailers with --group
trailer: add interface for iterating over commit trailers
shortlog: add grouping option
shortlog: change "author" variables to "ident"
|
|
The format.useAutoBase configuration option exists to allow users to
enable '--base=auto' for format-patch by default.
This can sometimes lead to poor workflow, due to unexpected failures
when attempting to format an ancient patch:
$ git format-patch -1 <an old commit>
fatal: base commit shouldn't be in revision list
This can be very confusing, as it is not necessarily immediately obvious
that the user requested a --base (since this was in the configuration,
not on the command line).
We do want --base=auto to fail when it cannot provide a suitable base,
as it would be equally confusing if a formatted patch did not include
the base information when it was requested.
Teach format.useAutoBase a new mode, "whenAble". This mode will cause
format-patch to attempt to include a base commit when it can. However,
if no valid base commit can be found, then format-patch will continue
formatting the patch without a base commit.
In order to avoid making yet another branch name unusable with --base,
do not teach --base=whenAble or --base=whenable.
Instead, refactor the base_commit option to use a callback, and rely on
the global configuration variable auto_base.
This does mean that a user cannot request this optional base commit
generation from the command line. However, this is likely not too
valuable. If the user requests base information manually, they will be
immediately informed of the failure to acquire a suitable base commit.
This allows the user to make an informed choice about whether to
continue the format.
Add tests to cover the new mode of operation for --base.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that shortlog supports reading from trailers, it can be useful to
combine counts from multiple trailers, or between trailers and authors.
This can be done manually by post-processing the output from multiple
runs, but it's non-trivial to make sure that each name/commit pair is
counted only once.
This patch teaches shortlog to accept multiple --group options on the
command line, and pull data from all of them. That makes it possible to
run:
git shortlog -ns --group=author --group=trailer:co-authored-by
to get a shortlog that counts authors and co-authors equally.
The implementation is mostly straightforward. The "group" enum becomes a
bitfield, and the trailer key becomes a list. I didn't bother
implementing the multi-group semantics for reading from stdin. It would
be possible to do, but the existing matching code makes it awkward, and
I doubt anybody cares.
The duplicate suppression we used for trailers now covers authors and
committers as well (though in non-trailer single-group mode we can skip
the hash insertion and lookup, since we only see one value per commit).
There is one subtlety: we now care about the case when no group bit is
set (in which case we default to showing the author). The caller in
builtin/log.c needs to be adapted to ask explicitly for authors, rather
than relying on shortlog_init(). It would be possible with some
gymnastics to make this keep working as-is, but it's not worth it for a
single caller.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"format-patch --range-diff=<prev> <origin>..HEAD" has been taught
not to ignore <origin> when <prev> is a single version.
* es/format-patch-interdiff-cleanup:
format-patch: use 'origin' as start of current-series-range when known
diff-lib: tighten show_interdiff()'s interface
diff: move show_interdiff() from its own file to diff-lib
|
|
"git status" has trouble showing where it came from by interpreting
reflog entries that recordcertain events, e.g. "checkout @{u}", and
gives a hard/fatal error. Even though it inherently is impossible
to give a correct answer because the reflog entries lose some
information (e.g. "@{u}" does not record what branch the user was
on hence which branch 'the upstream' needs to be computed, and even
if the record were available, the relationship between branches may
have changed), at least hide the error to allow "status" show its
output.
* jt/interpret-branch-name-fallback:
wt-status: tolerate dangling marks
refs: move dwim_ref() to header file
sha1-name: replace unsigned int with option struct
|
|
When formatting a patch series over `origin..HEAD`, one would expect
that range to be used as the current-series-range when computing a
range-diff between the previous and current versions of a patch series.
However, infer_range_diff_ranges() ignores `origin..HEAD` when
--range-diff=<prev> specifies a single revision rather than a range, and
instead unexpectedly computes the current-series-range based upon
<prev>. Address this anomaly by unconditionally using `origin..HEAD` as
the current-series-range regardless of <prev> as long as `origin` is
known, and only fall back to basing current-series-range on <prev> when
`origin` is not known.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To compute and show an interdiff, show_interdiff() needs only the two
OID's to compare and a diffopts, yet it expects callers to supply an
entire rev_info. The demand for rev_info is not only overkill, but also
places unnecessary burden on potential future callers which might not
otherwise have a rev_info at hand. Address this by tightening its
signature to require only the items it needs instead of a full rev_info.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
show_interdiff() is a relatively small function and not likely to grow
larger or more complicated. Rather than dedicating an entire source file
to it, relocate it to diff-lib.c which houses other "take two things and
compare them" functions meant to be re-used but not so low-level as to
reside in the core diff implementation.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a user checks out the upstream branch of HEAD, the upstream branch
not being a local branch, and then runs "git status", like this:
git clone $URL client
cd client
git checkout @{u}
git status
no status is printed, but instead an error message:
fatal: HEAD does not point to a branch
(This error message when running "git branch" persists even after
checking out other things - it only stops after checking out a branch.)
This is because "git status" reads the reflog when determining the "HEAD
detached" message, and thus attempts to DWIM "@{u}", but that doesn't
work because HEAD no longer points to a branch.
Therefore, when calculating the status of a worktree, tolerate dangling
marks. This is done by adding an additional parameter to
dwim_ref() and repo_dwim_ref().
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git log --first-parent -p" showed patches only for single-parent
commits on the first-parent chain; the "--first-parent" option has
been made to imply "-m". Use "--no-diff-merges" to restore the
previous behaviour to omit patches for merge commits.
* jk/log-fp-implies-m:
doc/git-log: clarify handling of merge commit diffs
doc/git-log: move "-t" into diff-options list
doc/git-log: drop "-r" diff option
doc/git-log: move "Diff Formatting" from rev-list-options
log: enable "-m" automatically with "--first-parent"
revision: add "--no-diff-merges" option to counteract "-m"
log: drop "--cc implies -m" logic
|
|
When using "--first-parent" to consider history as a single line of
commits, git-log still defaults to treating merges specially, even
though they could be considered as single commits in the linearized
history (that just introduce all of the changes from the second and
higher parents).
Let's instead have "--first-parent" imply "-m", which makes something
like:
git log --first-parent -p
do what you'd expect. Likewise:
git log --first-parent -Sfoo
will find "foo" in merge commits.
No new test is needed; we'll tweak the output of the existing
"--first-parent -p" test, which now matches the "-m --first-parent -p"
test. The unchanged existing test for "--no-diff-merges" confirms that
the user can get the old behavior if they want.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "-m" option sets revs->ignore_merges to "0", but there's no way to
undo it. This probably isn't something anybody overly cares about, since
"1" is already the default, but it will serve as an escape hatch when we
flip the default for ignore_merges to "0" in more situations.
We'll also add a few extra niceties:
- initialize the value to "-1" to indicate "not set", and then resolve
it to the normal 0/1 bool in setup_revisions(). This lets any tweak
functions, as well as setup_revisions() itself, avoid clobbering the
user's preference (which until now they couldn't actually express).
- since we now have --no-diff-merges, let's add the matching
--diff-merges, which is just a synonym for "-m". Then we don't even
need to document --no-diff-merges separately; it countermands the
long form of "-m" in the usual way.
The new test shows that this behaves just the same as the current
behavior without "-m".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This was added by 82dee4160c (log: show merge commit when --cc is given,
2015-08-20), which explains why we need it. But that commit failed to
notice that setup_revisions() already does the same thing, since
cd2bdc5309 (Common option parsing for "git log --diff" and friends,
2006-04-14).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts all of the files in builtin/ to keep the diff to a
manageable size.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
and then selectively staging files with "git add builtin/". We'll deal
with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* dl/opt-callback-cleanup:
Use OPT_CALLBACK and OPT_CALLBACK_F
|
|
The "--decorate-refs" and "--decorate-refs-exclude" options "git
log" takes have learned a companion configuration variable
log.excludeDecoration that sits at the lowest priority in the
family.
* ds/log-exclude-decoration-config:
log: add log.excludeDecoration config option
log-tree: make ref_filter_match() a helper method
|
|
"git log" learns "--[no-]mailmap" as a synonym to "--[no-]use-mailmap"
* jc/log-no-mailmap:
log: give --[no-]use-mailmap a more sensible synonym --[no-]mailmap
clone: reorder --recursive/--recurse-submodules
parse-options: teach "git cmd -h" to show alias as alias
|
|
In the codebase, there are many options which use OPTION_CALLBACK in a
plain ol' struct definition. However, we have the OPT_CALLBACK and
OPT_CALLBACK_F macros which are meant to abstract these plain struct
definitions away. These macros are useful as they semantically signal to
developers that these are just normal callback option with nothing fancy
happening.
Replace plain struct definitions of OPTION_CALLBACK with OPT_CALLBACK or
OPT_CALLBACK_F where applicable. The heavy lifting was done using the
following (disgusting) shell script:
#!/bin/sh
do_replacement () {
tr '\n' '\r' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\s*0,\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK(\1,\2,\3,\4,\5,\6)/g' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK_F(\1,\2,\3,\4,\5,\6,\7)/g' |
tr '\r' '\n'
}
for f in $(git ls-files \*.c)
do
do_replacement <"$f" >"$f.tmp"
mv "$f.tmp" "$f"
done
The result was manually inspected and then reformatted to match the
style of the surrounding code. Finally, using
`git grep OPTION_CALLBACK \*.c`, leftover results which were not handled
by the script were manually transformed.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 'git log', the --decorate-refs-exclude option appends a pattern
to a string_list. This list is used to prevent showing some refs
in the decoration output, or even by --simplify-by-decoration.
Users may want to use their refs space to store utility refs that
should not appear in the decoration output. For example, Scalar [1]
runs a background fetch but places the "new" refs inside the
refs/scalar/hidden/<remote>/* refspace instead of refs/<remote>/*
to avoid updating remote refs when the user is not looking. However,
these "hidden" refs appear during regular 'git log' queries.
A similar idea to use "hidden" refs is under consideration for core
Git [2].
Add the 'log.excludeDecoration' config option so users can exclude
some refs from decorations by default instead of needing to use
--decorate-refs-exclude manually. The config value is multi-valued
much like the command-line option. The documentation is careful to
point out that the config value can be overridden by the
--decorate-refs option, even though --decorate-refs-exclude would
always "win" over --decorate-refs.
Since the 'log.excludeDecoration' takes lower precedence to
--decorate-refs, and --decorate-refs-exclude takes higher
precedence, the struct decoration_filter needed another field.
This led also to new logic in load_ref_decorations() and
ref_filter_match().
There are several tests in t4202-log.sh that test the
--decorate-refs-(include|exclude) options, so these are extended.
Since the expected output is already stored as a file, most tests
could simply replace a "--decorate-refs-exclude" option with an
in-line config setting. Other tests involve the precedence of
the config option compared to command-line options and needed more
modification.
[1] https://github.com/microsoft/scalar
[2] https://lore.kernel.org/git/77b1da5d3063a2404cd750adfe3bb8be9b6c497d.1585946894.git.gitgitgadget@gmail.com/
Helped-by: Junio C Hamano <gister@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When commit subjects or authors have non-ASCII characters, git
format-patch Q-encodes them so they can be safely sent over email.
However, if the patch transfer method is something other than email (web
review tools, sneakernet), this only serves to make the patch metadata
harder to read without first applying it (unless you can decode RFC 2047
in your head). git am as well as some email software supports
non-Q-encoded mail as described in RFC 6531.
Add --[no-]encode-email-headers and format.encodeEmailHeaders to let the
user control this behavior.
Signed-off-by: Emma Brooks <me@pluvano.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The option name "--use-mailmap" looks OK, but it becomes awkward
when you have to negate it, i.e. "--no-use-mailmap". I, perhaps
with many other users, always try "--no-mailmap" and become unhappy
to see it fail.
Add an alias "--[no-]mailmap" to remedy this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git format-patch" can take a set of configured format.notes values
to specify which notes refs to use in the log message part of the
output. The behaviour of this was not consistent with multiple
--notes command line options, which has been corrected.
* dl/format-patch-notes-config-fixup:
notes.h: fix typos in comment
notes: break set_display_notes() into smaller functions
config/format.txt: clarify behavior of multiple format.notes
format-patch: move git_config() before repo_init_revisions()
format-patch: use --notes behavior for format.notes
notes: extract logic into set_display_notes()
notes: create init_display_notes() helper
notes: rename to load_display_notes()
|
|
"git rebase" did not work well when format.useAutoBase
configuration variable is set, which has been corrected.
* dl/rebase-with-autobase:
rebase: fix format.useAutoBase breakage
format-patch: teach --no-base
t4014: use test_config()
format-patch: fix indentation
t3400: demonstrate failure with format.useAutoBase
|
|
In 8164c961e1 (format-patch: use --notes behavior for format.notes,
2019-12-09), we introduced set_display_notes() which was a monolithic
function with three mutually exclusive branches. Break the function up
into three small and simple functions that each are only responsible for
one task.
This family of functions accepts an `int *show_notes` instead of
returning a value suitable for assignment to `show_notes`. This is for
two reasons. First of all, this guarantees that the external
`show_notes` variable changes in lockstep with the
`struct display_notes_opt`. Second, this prompts future developers to be
careful about doing something meaningful with this value. In fact, a
NULL check is intentionally omitted because causing a segfault here
would tell the future developer that they are meant to use the value for
something meaningful.
One alternative was making the family of functions accept a
`struct rev_info *` instead of the `struct display_notes_opt *`, since
the former contains the `show_notes` field as well. This does not work
because we have to call git_config() before repo_init_revisions().
However, if we had a `struct rev_info`, we'd need to initialize it before
it gets assigned values from git_config(). As a result, we break the
circular dependency by having standalone `int show_notes` and
`struct display_notes_opt notes_opt` variables which temporarily hold
values from git_config() until the values are copied over to `rev`.
To implement this change, we need to get a pointer to
`rev_info::show_notes`. Unfortunately, this is not possible with
bitfields and only direct-assignment is possible. Change
`rev_info::show_notes` to a non-bitfield int so that we can get its
address.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 13cdf78094 (format-patch: teach format.notes config option,
2019-05-16), the order in which git_config() and repo_init_revisions()
were swapped so that `rev.notes_opt` would be initialized before
git_config() was called. This is problematic, however, as git_config()
should generally be called before repo_init_revisions().
Break this circular dependency by creating `show_notes` and `notes_opt`
which git_config() reads into. Then, copy these values over to
`rev.show_notes` and `rev.notes_opt` after repo_init_revisions() is
called.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we had multiple `format.notes` config values where we had `<ref1>`,
`false`, `<ref2>` (in that order), then we would print out the notes for
both `<ref1>` and `<ref2>`. This doesn't make sense, however, since we
parse the config in a top-down manner and a `false` should be able to
override previous configurations, just like how `--no-notes` will
override previous `--notes`.
Duplicate the logic that handles the `--[no-]notes[=]` option to
`format.notes` for consistency. As a result, when parsing the config
from top to bottom, `format.notes = true` will behave like `--notes`,
`format.notes = <ref>` will behave like `--notes=<ref>` and
`format.notes = false` will behave like `--no-notes`.
This change isn't strictly backwards compatible but since it is an edge
case where a sane user would not mix notes refs with `false` and this
feature is relatively new (released only in v2.23.0), this change should
be harmless.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
According to the function comment, init_display_notes() was supposed to
"Load the notes machinery for displaying several notes trees." Rename
this function to load_display_notes() so that its use is more accurately
represented.
This is done because, in a future commit, we will reuse the name
init_display_notes().
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If `format.useAutoBase = true`, there was no way to override this from
the command-line. Teach the `--no-base` option in format-patch to
override `format.useAutoBase`.
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since format-patch accepts `--[no-]notes`, one would expect the
range-diff generated to also respect the setting. Unfortunately, the
range-diff we currently generate only uses the default option (which
always outputs default notes, even when notes are not being used
elsewhere).
Pass the notes configuration to range-diff so that it can honor it.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a commit being range-diff'd has a note attached to it, the note
will be compared as well. However, if a user has multiple notes refs or
if they want to suppress notes from being printed, there is currently no
way to do this.
Pass through `--[no-]notes[=<ref>]` to the `git log` call so that this
option is customizable.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The branch description ("git branch --edit-description") has been
used to fill the body of the cover letters by the format-patch
command; this has been enhanced so that the subject can also be
filled.
* dl/format-patch-cover-from-desc:
format-patch: teach --cover-from-description option
format-patch: use enum variables
format-patch: replace erroneous and condition
|
|
"git format-patch -o <outdir>" did an equivalent of "mkdir <outdir>"
not "mkdir -p <outdir>", which is being corrected.
* bw/format-patch-o-create-leading-dirs:
format-patch: create leading components of output directory
|
|
Before, when format-patch generated a cover letter, only the body would
be populated with a branch's description while the subject would be
populated with placeholder text. However, users may want to have the
subject of their cover letter automatically populated in the same way.
Teach format-patch to accept the `--cover-from-description` option and
corresponding `format.coverFromDescription` config, allowing users to
populate different parts of the cover letter (including the subject
now).
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before, `thread` and `config_cover_letter` were defined as ints even
though they behaved as enums. Define actual enums and change these
variables to use these new definitions.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 30984ed2e9 (format-patch: support deep threading, 2009-02-19),
introduced the following lines:
#define THREAD_SHALLOW 1
[...]
thread = git_config_bool(var, value) && THREAD_SHALLOW;
Since git_config_bool() returns a bool, the trailing `&& THREAD_SHALLOW`
is a no-op. Replace this errorneous and condition with a ternary
statement so that it is clear what the configured value is when a
boolean is given.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git format-patch -o <outdir>' did an equivalent of 'mkdir <outdir>'
not 'mkdir -p <outdir>', which is being corrected.
Avoid the usage of 'adjust_shared_perm' on the leading directories which
may have security implications. Achieved by temporarily disabling of
'config.sharedRepository' like 'git init' does.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Avoid derefencing ->tagged without checking for NULL by using the
convenience wrapper for getting the ID of the tagged object. It die()s
when encountering a broken tag instead of segfaulting.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update the docs, test the interaction between the new default,
configuration and command line option, in addition to actually
flipping the default.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It turns out that being cautious to warn against upcoming default
change was an unpopular behaviour, and such a care can easily be
defeated by distro packagers to render it ineffective anyway.
Just flip the default, with only a mention in the release notes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Based on discussions around changing the log.mailmap default to being
enabled, it was decided that a transitional period is required.
Accordingly, we announce this transitional period with a warning
message.
Signed-off-by: Ariadne Conill <ariadne@dereferenced.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git format-patch" learns a configuration to set the default for
its --notes=<ref> option.
* dl/format-patch-notes-config:
format-patch: teach format.notes config option
git-format-patch.txt: document --no-notes option
|
|
In git-format-patch, notes can be appended with the `--notes` option.
However, this must be specified by the user on an
invocation-by-invocation basis. If a user is not careful, it's possible
that they may forget to include it and generate a patch series without
notes.
Teach git-format-patch the `format.notes` config option. Its value is a
notes ref that will be automatically appended. The special value of
"standard" can be used to specify the standard notes. This option is
overridable with the `--no-notes` option in case a user wishes not to
append notes.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We weren't flushing the context each time we processed a hunk in the
patch-id generation code in diff.c, but we were doing that when we
generated "stable" patch-ids with the 'patch-id' tool. Let's port that
similar logic over from patch-id.c into diff.c so we can get the same
hash when we're generating patch-ids for 'format-patch --base=' types of
command invocations.
Cc: Xiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* jk/unused-params-even-more:
parse_opt_ref_sorting: always use with NONEG flag
pretty: drop unused strbuf from parse_padding_placeholder()
pretty: drop unused "type" parameter in needs_rfc2047_encoding()
parse-options: drop unused ctx parameter from show_gitcomp()
fetch_pack(): drop unused parameters
report_path_error(): drop unused prefix parameter
unpack-trees: drop unused error_type parameters
unpack-trees: drop name_entry from traverse_by_cache_tree()
test-date: drop unused "now" parameter from parse_dates()
update-index: drop unused prefix_length parameter from do_reupdate()
log: drop unused "len" from show_tagger()
log: drop unused rev_info from early output
revision: drop some unused "revs" parameters
|
|
"git format-patch" used overwrite an existing patch/cover-letter
file. A new "--no-clobber" option stops it.
* jc/format-patch-error-check:
format-patch: notice failure to open cover letter for writing
builtin/log: downcase the beginning of error messages
|
|
We pass the length of the found "tagger" line to show_tagger(), but it
does not use it; instead, it passes the string to pp_user_info(), which
reads until newline or NUL. This is OK for our purposes because we
always read the object contents into a buffer with an extra NUL (and
indeed, our sole caller already relies on this by using starts_with).
Let's drop the ignored parameter. And while we're touching the caller,
let's use skip_prefix() to avoid a magic number.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The early output code passes around a rev_info struct but doesn't need
it. The setup step only turns on global signal handlers, and the
"estimate" step is done completely from the rev->commits list that is
passed in separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The make_cover_letter() function is supposed to open a new file for
writing, and let the caller write into it via FILE *rev->diffopt.file
but because the function does not return anything, the caller does not
bother checking the return value.
Make sure it dies, instead of keep going with a NULL output
filestream and relying on it to cause a crash, when it fails to
open the file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
