| Age | Commit message (Collapse) | Author |
|---|
|
diff and textconv code has so widespread use that it's hard to simply
update their api and all call sites at once because it would result in
a big patch. For now reduce the_index references to two places:
diff_setup() and fill_textconv().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit 7e25437d35a70791b345872af202eabfb3e1a8bc, reversing
changes made to 00624d608cc69bd62801c93e74d1ea7a7ddd6598.
v2.19.0-rc0~165^2~1 (submodule: ensure core.worktree is set after
update, 2018-06-18) assumes an "absorbed" submodule layout, where the
submodule's Git directory is in the superproject's .git/modules/
directory and .git in the submodule worktree is a .git file pointing
there. In particular, it uses $GIT_DIR/modules/$name to find the
submodule to find out whether it already has core.worktree set, and it
uses connect_work_tree_and_git_dir if not, resulting in
fatal: could not open sub/.git for writing
The context behind that patch: v2.19.0-rc0~165^2~2 (submodule: unset
core.worktree if no working tree is present, 2018-06-12) unsets
core.worktree when running commands like "git checkout
--recurse-submodules" to switch to a branch without the submodule. If
a user then uses "git checkout --no-recurse-submodules" to switch back
to a branch with the submodule and runs "git submodule update", this
patch is needed to ensure that commands using the submodule directly
are aware of the path to the worktree.
It is late in the release cycle, so revert the whole 3-patch series.
We can try again later for 2.20.
Reported-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recent addition of "directory rename" heuristics to the
merge-recursive backend makes the command susceptible to false
positives and false negatives. In the context of "git am -3",
which does not know about surrounding unmodified paths and thus
cannot inform the merge machinery about the full trees involved,
this risk is particularly severe. As such, the heuristic is
disabled for "git am -3" to keep the machinery "more stupid but
predictable".
* en/directory-renames-nothanks:
am: avoid directory rename detection when calling recursive merge machinery
merge-recursive: add ability to turn off directory rename detection
t3401: add another directory rename testcase for rebase and am
|
|
Let's say you have the following three trees, where Base is from one commit
behind either master or branch:
Base : bar_v1, foo/{file1, file2, file3}
branch: bar_v2, foo/{file1, file2}, goo/file3
master: bar_v3, foo/{file1, file2, file3}
Using git-am (or am-based rebase) to apply the changes from branch onto
master results in the following tree:
Result: bar_merged, goo/{file1, file2, file3}
This is not what users want; they did not rename foo/ -> goo/, they only
renamed one file within that directory. The reason this happens is am
constructs fake trees (via build_fake_ancestor()) of the following form:
Base_bfa : bar_v1, foo/file3
branch_bfa: bar_v2, goo/file3
Combining these two trees with master's tree:
master: bar_v3, foo/{file1, file2, file3},
You can see that merge_recursive_generic() would see branch_bfa as renaming
foo/ -> goo/, and master as just adding both foo/file1 and foo/file2. As
such, it ends up with goo/{file1, file2, file3}
The core problem is that am does not have access to the original trees; it
can only construct trees using the blobs involved in the patch. As such,
it is not safe to perform directory rename detection within am -3.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Messages fix.
* ja/i18n-message-fixes:
i18n: fix mistakes in translated strings
|
|
Finishing touched to help string.
* js/range-diff:
range-diff: update stale summary of --no-dual-color
|
|
"git cmd -h" updates.
* rs/opt-updates:
parseopt: group literal string alternatives in argument help
remote: improve argument help for add --mirror
checkout-index: improve argument help for --stage
|
|
"git worktree" command learned "--quiet" option to make it less
verbose.
* ep/worktree-quiet-option:
worktree: add --quiet option
|
|
"git branch --list" learned to take the default sort order from the
'branch.sort' configuration variable, just like "git tag --list"
pays attention to 'tag.sort'.
* sm/branch-sort-config:
branch: support configuring --sort via .gitconfig
|
|
275267937b (range-diff: make dual-color the default mode, 2018-08-13)
replaced --dual-color with --no-dual-color but left the option's
summary untouched. Rewrite the summary to describe --no-dual-color
rather than dual-color.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix typos and convert a question which does not expect to be replied
to a simple advice.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a recent update in 2.18 era, "git pack-objects" started
producing a larger than necessary packfiles by missing
opportunities to use large deltas.
* nd/pack-deltify-regression-fix:
pack-objects: fix performance issues on packing large deltas
|
|
This formally clarifies that the "--option=" part is the same for all
alternatives.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Group the possible values using a pair of parentheses and don't mark
them for translation, as they are literal strings that have to be used
as-is in any locale.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Spell out all alternatives and avoid using a numerical range operator,
as it is not mentioned in CodingGuidelines and the resulting string is
still concise. Wrap them in parentheses to document clearly that the
"--stage=" part is common among them.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git cherry-pick --quit" failed to remove CHERRY_PICK_HEAD even
though we won't be in a cherry-pick session after it returns, which
has been corrected.
* nd/cherry-pick-quit-fix:
cherry-pick: fix --quit not deleting CHERRY_PICK_HEAD
|
|
A few preliminary minor clean-ups in the area around submodules.
* sb/submodule-cleanup:
builtin/submodule--helper: remove stray new line
t7410: update to new style
|
|
After a partial clone, repeated fetches from promisor remote would
have accumulated many packfiles marked with .promisor bit without
getting them coalesced into fewer packfiles, hurting performance.
"git repack" now learned to repack them.
* jt/repack-promisor-packs:
repack: repack promisor objects if -a or -A is set
repack: refactor setup of pack-objects cmd
|
|
"git tbdiff" that lets us compare individual patches in two
iterations of a topic has been rewritten and made into a built-in
command.
* js/range-diff: (21 commits)
range-diff: use dim/bold cues to improve dual color mode
range-diff: make --dual-color the default mode
range-diff: left-pad patch numbers
completion: support `git range-diff`
range-diff: populate the man page
range-diff --dual-color: skip white-space warnings
range-diff: offer to dual-color the diffs
diff: add an internal option to dual-color diffs of diffs
color: add the meta color GIT_COLOR_REVERSE
range-diff: use color for the commit pairs
range-diff: add tests
range-diff: do not show "function names" in hunk headers
range-diff: adjust the output of the commit pairs
range-diff: suppress the diff headers
range-diff: indent the diffs just like tbdiff
range-diff: right-trim commit messages
range-diff: also show the diff between patches
range-diff: improve the order of the shown commits
range-diff: first rudimentary implementation
Introduce `range-diff` to compare iterations of a topic branch
...
|
|
The more library-ish parts of the codebase learned to work on the
in-core index-state instance that is passed in by their callers,
instead of always working on the singleton "the_index" instance.
* nd/no-the-index: (24 commits)
blame.c: remove implicit dependency on the_index
apply.c: remove implicit dependency on the_index
apply.c: make init_apply_state() take a struct repository
apply.c: pass struct apply_state to more functions
resolve-undo.c: use the right index instead of the_index
archive-*.c: use the right repository
archive.c: avoid access to the_index
grep: use the right index instead of the_index
attr: remove index from git_attr_set_direction()
entry.c: use the right index instead of the_index
submodule.c: use the right index instead of the_index
pathspec.c: use the right index instead of the_index
unpack-trees: avoid the_index in verify_absent()
unpack-trees: convert clear_ce_flags* to avoid the_index
unpack-trees: don't shadow global var the_index
unpack-trees: add a note about path invalidation
unpack-trees: remove 'extern' on function declaration
ls-files: correct index argument to get_convert_attr_ascii()
preload-index.c: use the right index instead of the_index
dir.c: remove an implicit dependency on the_index in pathspec code
...
|
|
The API to iterate over all objects learned to optionally list
objects in the order they appear in packfiles, which helps locality
of access if the caller accesses these objects while as objects are
enumerated.
* jk/for-each-object-iteration:
for_each_*_object: move declarations to object-store.h
cat-file: use a single strbuf for all output
cat-file: split batch "buf" into two variables
cat-file: use oidset check-and-insert
cat-file: support "unordered" output for --batch-all-objects
cat-file: rename batch_{loose,packed}_object callbacks
t1006: test cat-file --batch-all-objects with duplicates
for_each_packed_object: support iterating in pack-order
for_each_*_object: give more comprehensive docstrings
for_each_*_object: take flag arguments as enum
for_each_*_object: store flag definitions in a single location
|
|
Add the '--quiet' option to git worktree, as for the other git
commands. 'add' is the only command affected by it since all other
commands, except 'list', are currently silent by default.
[jc: appiled trivial fix-up to keep the tests from touching outside
the scratch area]
Helped-by: Martin Ågren <martin.agren@gmail.com>
Helped-by: Duy Nguyen <pclouds@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git pull --rebase=interactive" learned "i" as a short-hand for
"interactive".
* js/pull-rebase-type-shorthand:
pull --rebase=<type>: allow single-letter abbreviations for the type
|
|
The parse-options machinery learned to refrain from enclosing
placeholder string inside a "<bra" and "ket>" pair automatically
without PARSE_OPT_LITERAL_ARGHELP. Existing help text for option
arguments that are not formatted correctly have been identified and
fixed.
* rs/parse-opt-lithelp:
parse-options: automatically infer PARSE_OPT_LITERAL_ARGHELP
shortlog: correct option help for -w
send-pack: specify --force-with-lease argument help explicitly
pack-objects: specify --index-version argument help explicitly
difftool: remove angular brackets from argument help
add, update-index: fix --chmod argument help
push: use PARSE_OPT_LITERAL_ARGHELP instead of unbalanced brackets
|
|
Add support for configuring default sort ordering for git branches. Command
line option will override this configured value, using the exact same
syntax.
Signed-off-by: Samuel Maftoul <samuel.maftoul@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
--quit is supposed to be --abort but without restoring HEAD. Leaving
CHERRY_PICK_HEAD behind could make other commands mistake that
cherry-pick is still ongoing (e.g. "git commit --amend" will refuse to
work). Clean it too.
For --abort, this job of deleting CHERRY_PICK_HEAD is on "git reset"
so we don't need to do anything else. But let's add extra checks in
--abort tests to confirm.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fetch" sometimes failed to update the remote-tracking refs,
which has been corrected.
* jt/connectivity-check-after-unshallow:
fetch-pack: unify ref in and out param
|
|
Leakfix.
* rs/remote-mv-leakfix:
remote: clear string_list after use in mv()
|
|
Doc fix.
* nd/pack-objects-threading-doc:
pack-objects: document about thread synchronization
|
|
The wire-protocol v2 relies on the client to send "ref prefixes" to
limit the bandwidth spent on the initial ref advertisement. "git
fetch $remote branch:branch" that asks tags that point into the
history leading to the "branch" automatically followed sent to
narrow prefix and broke the tag following, which has been fixed.
* jt/tag-following-with-proto-v2-fix:
fetch: send "refs/tags/" prefix upon CLI refspecs
t5702: test fetch with multiple refspecs at a time
|
|
Code clean-up to use size_t/ssize_t when they are the right type.
* jk/size-t:
strbuf_humanise: use unsigned variables
pass st.st_size as hint for strbuf_readlink()
strbuf_readlink: use ssize_t
strbuf: use size_t for length in intermediate variables
reencode_string: use size_t for string lengths
reencode_string: use st_add/st_mult helpers
|
|
Many more strings are prepared for l10n.
* nd/i18n: (23 commits)
transport-helper.c: mark more strings for translation
transport.c: mark more strings for translation
sha1-file.c: mark more strings for translation
sequencer.c: mark more strings for translation
replace-object.c: mark more strings for translation
refspec.c: mark more strings for translation
refs.c: mark more strings for translation
pkt-line.c: mark more strings for translation
object.c: mark more strings for translation
exec-cmd.c: mark more strings for translation
environment.c: mark more strings for translation
dir.c: mark more strings for translation
convert.c: mark more strings for translation
connect.c: mark more strings for translation
config.c: mark more strings for translation
commit-graph.c: mark more strings for translation
builtin/replace.c: mark more strings for translation
builtin/pack-objects.c: mark more strings for translation
builtin/grep.c: mark strings for translation
builtin/config.c: mark more strings for translation
...
|
|
The wire-protocol v2 relies on the client to send "ref prefixes" to
limit the bandwidth spent on the initial ref advertisement. "git
clone" when learned to speak v2 forgot to do so, which has been
corrected.
* bw/clone-ref-prefixes:
clone: send ref-prefixes when using protocol v2
|
|
A new configuration variable core.usereplacerefs has been added,
primarily to help server installations that want to ignore the
replace mechanism altogether.
* jk/core-use-replace-refs:
add core.usereplacerefs config option
check_replace_refs: rename to read_replace_refs
check_replace_refs: fix outdated comment
|
|
The for_each_loose_object() and for_each_packed_object()
functions are meant to be part of a unified interface: they
use the same set of for_each_object_flags, and it's not
inconceivable that we might one day add a single
for_each_object() wrapper around them.
Let's put them together in a single file, so we can avoid
awkwardness like saying "the flags for this function are
over in cache.h". Moving the loose functions to packfile.h
is silly. Moving the packed functions to cache.h works, but
makes the "cache.h is a kitchen sink" problem worse. The
best place is the recently-created object-store.h, since
these are quite obviously related to object storage.
The for_each_*_in_objdir() functions do not use the same
flags, but they are logically part of the same interface as
for_each_loose_object(), and share callback signatures. So
we'll move those, as well, as they also make sense in
object-store.h.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we're in batch mode, we end up in batch_object_write()
for each object, which allocates its own strbuf for each
call. Instead, we can provide a single "scratch" buffer that
gets reused for each output. When running:
git cat-file --batch-all-objects --batch-check='%(objectname)'
on git.git, my best-of-five time drops from:
real 0m0.171s
user 0m0.159s
sys 0m0.012s
to:
real 0m0.133s
user 0m0.121s
sys 0m0.012s
Note that we could do this just by putting the "scratch"
pointer into "struct expand_data", but I chose instead to
add an extra parameter to the callstack. That's more
verbose, but it makes it a bit more obvious what is going
on, which in turn makes it easy to see where we need to be
releasing the string in the caller (right after the loop
which uses it in each case).
Based-on-a-patch-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We use the "buf" strbuf for two things: to read incoming
lines, and as a scratch space for test-expanding the
user-provided format. Let's split this into two variables
with descriptive names, which makes their purpose and
lifetime more clear.
It will also help in a future patch when we start using the
"output" buffer for more expansions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We don't need to check if the oidset has our object before
we insert it; that's done as part of the insertion. We can
just rely on the return value from oidset_insert(), which
saves one hash lookup per object.
This measurable speedup is tiny and within the run-to-run
noise, but the result is simpler to read, too.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Side note, since we gain access to the right repository, we can stop
rely on the_repository in this code as well.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We're moving away from the_index in this code. "struct index_state *"
could be added to struct apply_state. But let's aim long term and put
struct repository here instead so that we could even avoid more global
states in the future. The index will be available via
apply_state->repo->index.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since attr checking API now take the index, there's no need to set an
index in advance with this call. Most call sites are straightforward
because they either pass the_index or NULL (which defaults back to
the_index previously). There's only one suspicious call site in
unpack-trees.c where it sets a different index.
This code in unpack-trees is about to check out entries from the
new/temporary index after merging is done in it. The attributes will
be used by entry.c code to do crlf conversion if needed. entry.c now
respects struct checkout's istate field, and this field is correctly
set in unpack-trees.c, there should be no regression from this change.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
checkout-index.c needs update because if checkout->istate is NULL,
ie_match_stat() will crash. Previously this is ie_match_stat(&the_index, ..)
so it will not crash, but it is not technically correct either.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
write_eolinfo() does take an istate as function argument and it should
be used instead of the_index.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make the match_patchspec API and friends take an index_state instead
of assuming the_index in dir.c. All external call sites are converted
blindly to keep the patch simple and retain current behavior.
Individual call sites may receive further updates to use the right
index instead of the_index.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make the convert API take an index_state instead of assuming the_index
in convert.c. All external call sites are converted blindly to keep
the patch simple and retain current behavior. Individual call sites
may receive further updates to use the right index instead of
the_index.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make the attr API take an index_state instead of assuming the_index in
attr code. All call sites are converted blindly to keep the patch
simple and retain current behavior. Individual call sites may receive
further updates to use the right index instead of the_index.
There is one ugly temporary workaround added in attr.c that needs some
more explanation.
Commit c24f3abace (apply: file commited with CRLF should roundtrip
diff and apply - 2017-08-19) forces one convert_to_git() call to NOT
read the index at all. But what do you know, we read it anyway by
falling back to the_index. When "istate" from convert_to_git is now
propagated down to read_attr_from_array() we will hit segfault
somewhere inside read_blob_data_from_index.
The right way of dealing with this is to kill "use_index" variable and
only follow "istate" but at this stage we are not ready for that:
while most git_attr_set_direction() calls just passes the_index to be
assigned to use_index, unpack-trees passes a different one which is
used by entry.c code, which has no way to know what index to use if we
delete use_index. So this has to be done later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This code is only needed for diff-tree (since f0c6b2a2fd ([PATCH]
Optimize diff-tree -[CM] --stdin - 2005-05-27)). Let the caller do the
preparation instead and avoid read_index() in diff.c code.
read_index() should be avoided (in addition to the_index) because it
uses get_index_file() underneath to get the path $GIT_DIR/index. This
effectively pulls the_repository in and may become the only reason to
pull a 'struct repository *' in diff.c. Let's keep the dependencies as
few as possible and kick it back to diff-tree.c
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
