| Age | Commit message (Collapse) | Author |
|---|
|
"git checkout topic", when there is not yet a local "topic" branch
but there is a unique remote-tracking branch for a remote "topic"
branch, pretended as if "git checkout -t -b topic remote/$r/topic"
(for that unique remote $r) was run. This hack however was not
implemented for "git checkout topic --".
* mm/checkout-auto-track-fix:
checkout: proper error message on 'git checkout foo bar --'
checkout: allow dwim for branch creation for "git checkout $branch --"
|
|
"git clone" gave some progress messages to the standard output, not to
the standard error, and did not allow suppressing them with the
"--no-progress" option.
* jk/clone-progress-to-stderr:
clone: always set transport options
clone: treat "checking connectivity" like other progress
clone: send diagnostic messages to stderr
|
|
"git shortlog" used to choke and die when there is a malformed commit
(e.g. missing authors); it now simply ignore such a commit and keeps
going.
* jk/shortlog-tolerate-broken-commit:
shortlog: ignore commits with missing authors
|
|
"git ls-files -k" needs to crawl only the part of the working tree
that may overlap the paths in the index to find killed files, but
shared code with the logic to find all the untracked files, which
made it unnecessarily inefficient.
* jc/ls-files-killed-optim:
dir.c::test_one_path(): work around directory_exists_in_index_icase() breakage
t3010: update to demonstrate "ls-files -k" optimization pitfalls
ls-files -k: a directory only can be killed if the index has a non-directory
dir.c: use the cache_* macro to access the current index
|
|
When there is no sufficient overlap between old and new history
during a "git fetch" into a shallow repository, objects that the
sending side knows the receiving end has were unnecessarily sent.
* nd/fetch-into-shallow:
Add testcase for needless objects during a shallow fetch
list-objects: mark more commits as edges in mark_edges_uninteresting
list-objects: reduce one argument in mark_edges_uninteresting
upload-pack: delegate rev walking in shallow fetch to pack-objects
shallow: add setup_temporary_shallow()
shallow: only add shallow graft points to new shallow file
move setup_alternate_shallow and write_shallow_commits to shallow.c
|
|
The previous code was detecting the presence of "--" by looking only at
argument 1. As a result, "git checkout foo bar --" was interpreted as an
ambiguous file/revision list, and errored out with:
error: pathspec 'foo' did not match any file(s) known to git.
error: pathspec 'bar' did not match any file(s) known to git.
error: pathspec '--' did not match any file(s) known to git.
This patch fixes it by walking through the argument list to find the
"--", and now complains about the number of references given.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "--" notation disambiguates files and branches, but as a side-effect
of the previous implementation, also disabled the branch auto-creation
when $branch does not exist.
A possible scenario is then:
git checkout $branch
=> fails if $branch is both a ref and a file, and suggests --
git checkout $branch --
=> refuses to create the $branch
This patch allows the second form to create $branch, and since the -- is
provided, it does not look for file named $branch.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ap/commit-author-mailmap:
commit: search author pattern against mailmap
|
|
Since 920b691 (clone: refuse to clone if --branch
points to bogus ref) we refuse to clone with option
"-b" if the specified branch does not exist in the
(non-empty) upstream. If the upstream repository is empty,
the branch doesn't exist, either. So refuse the clone too.
Reported-by: Robert Mitwicki <robert.mitwicki@opensoftware.pl>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
Most of git's traversals are robust against minor breakages
in commit data. For example, "git log" will still output an
entry for a commit that has a broken encoding or missing
author, and will not abort the whole operation.
Shortlog, on the other hand, will die as soon as it sees a
commit without an author, meaning that a repository with
a broken commit cannot get any shortlog output at all.
Let's downgrade this fatal error to a warning, and continue
the operation.
We simply ignore the commit and do not count it in the total
(since we do not have any author under which to file it).
Alternatively, we could output some kind of "<empty>" record
to collect these bogus commits. It is probably not worth it,
though; we have already warned to stderr, so the user is
aware that such bogosities exist, and any placeholder we
came up with would either be syntactically invalid, or would
potentially conflict with real data.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A clone will always create a transport struct, whether we
are cloning locally or using an actual protocol. In the
local case, we only use the transport to get the list of
refs, and then transfer the objects out-of-band.
However, there are many options that we do not bother
setting up in the local case. For the most part, these are
noops, because they only affect the object-fetching stage
(e.g., the --depth option). However, some options do have a
visible impact. For example, giving the path to upload-pack
via "-u" does not currently work for a local clone, even
though we need upload-pack to get the ref list.
We can just drop the conditional entirely and set these
options for both local and non-local clones. Rather than
keep track of which options impact the object versus the ref
fetching stage, we can simply let the noops be noops (and
the cost of setting the options in the first place is not
high).
The one exception is that we also check that the transport
provides both a "get_refs_list" and a "fetch" method. We
will now be checking the former for both cases (which is
good, since a transport that cannot fetch refs would not
work for a local clone), and we tweak the conditional to
check for a "fetch" only when we are non-local.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When stderr does not point to a tty, we typically suppress
"we are now in this phase" progress reporting (e.g., we ask
the server not to send us "counting objects" and the like).
The new "checking connectivity" message is in the same vein,
and should be suppressed. Since clone relies on the
transport code to make the decision, we can simply sneak a
peek at the "progress" field of the transport struct. That
properly takes into account both the verbosity and progress
options we were given, as well as the result of isatty().
Note that we do not set up that progress flag for a local
clone, as we do not fetch using the transport at all. That's
acceptable here, though, because we also do not perform a
connectivity check in that case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Putting messages like "Cloning into.." and "done" on stdout
is un-Unix and uselessly clutters the stdout channel. Send
them to stderr.
We have to tweak two tests to accommodate this:
1. t5601 checks for doubled output due to forking, and
doesn't actually care where the output goes; adjust it
to check stderr.
2. t5702 is trying to test whether progress output was
sent to stderr, but naively does so by checking
whether stderr produced any output. Instead, have it
look for "%", a token found in progress output but not
elsewhere (and which lets us avoid hard-coding the
progress text in the test).
This should not regress any scripts that try to parse the
current output, as the output is already internationalized
and therefore unstable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Sparse issues an "'prepare_transport' was not declared. Should it
be static?" warning. In order to suppress the warning, since this
symbol only requires file scope, we simply add the static modifier
to it's declaration.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
mark_edges_uninteresting() is always called with this form
mark_edges_uninteresting(revs->commits, revs, ...);
Remove the first argument and let mark_edges_uninteresting figure that
out by itself. It helps answer the question "are this commit list and
revs related in any way?" when looking at mark_edges_uninteresting
implementation.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git commit --author=$name" sets the author to one whose name
matches the given string from existing commits, when $name is not in
the "Name <e-mail>" format. However, it does not honor the mailmap
to use the canonical name for the author found this way.
Fix it by telling the logic to find a matching existing author to
honor the mailmap, and use the name and email after applying the
mailmap.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"ls-files -o" and "ls-files -k" both traverse the working tree down
to find either all untracked paths or those that will be "killed"
(removed from the working tree to make room) when the paths recorded
in the index are checked out. It is necessary to traverse the
working tree fully when enumerating all the "other" paths, but when
we are only interested in "killed" paths, we can take advantage of
the fact that paths that do not overlap with entries in the index
can never be killed.
The treat_one_path() helper function, which is called during the
recursive traversal, is the ideal place to implement an
optimization.
When we are looking at a directory P in the working tree, there are
three cases:
(1) P exists in the index. Everything inside the directory P in
the working tree needs to go when P is checked out from the
index.
(2) P does not exist in the index, but there is P/Q in the index.
We know P will stay a directory when we check out the contents
of the index, but we do not know yet if there is a directory
P/Q in the working tree to be killed, so we need to recurse.
(3) P does not exist in the index, and there is no P/Q in the index
to require P to be a directory, either. Only in this case, we
know that everything inside P will not be killed without
recursing.
Note that this helper is called by treat_leading_path() that decides
if we need to traverse only subdirectories of a single common
leading directory, which is essential for this optimization to be
correct. This caller checks each level of the leading path
component from shallower directory to deeper ones, and that is what
allows us to only check if the path appears in the index. If the
call to treat_one_path() weren't there, given a path P/Q/R, the real
traversal may start from directory P/Q/R, even when the index
records P as a regular file, and we would end up having to check if
any leading subpath in P/Q/R, e.g. P, appears in the index.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A Git-aware "connect" transport allows the "transport_take_over" to
redirect generic transport requests like fetch(), push_refs() and
get_refs_list() to the native Git transport handling methods. The
take-over process replaces transport->data with a fake data that
these method implementations understand.
While this hack works OK for a single request, it breaks when the
transport needs to make more than one requests. transport->data
that used to hold necessary information for the specific helper to
work correctly is destroyed during the take-over process.
One codepath that this matters is "git fetch" in auto-follow mode;
when it does not get all the tags that ought to point at the history
it got (which can be determined by looking at the peeled tags in the
initial advertisement) from the primary transfer, it internally
makes a second request to complete the fetch. Because "take-over"
hack has already destroyed the data necessary to talk to the
transport helper by the time this happens, the second request cannot
make a request to the helper to make another connection to fetch
these additional tags.
Mark such a transport as "cannot_reuse", and use a separate
transport to perform the backfill fetch in order to work around
this breakage.
Note that this problem does not manifest itself when running t5802,
because our upload-pack gives you all the necessary auto-followed
tags during the primary transfer. You would need to step through
"git fetch" in a debugger, stop immediately after the primary
transfer finishes and writes these auto-followed tags, remove the
tag references and repack/prune the repository to convince the
"find-non-local-tags" procedure that the primary transfer failed to
give us all the necessary tags, and then let it continue, in order
to trigger the bug in the secondary transfer this patch fixes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Usually the upload-pack process running on the other side will give
us all the reachable tags we need during the primary object transfer
in do_fetch(). If that does not happen (e.g. the other side may be
running a third-party implementation of upload-pack), we will run
another fetch to pick up leftover tags that we know point at the
commits reachable from our updated tips.
Separate out the code to run this second fetch into a helper
function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make a helper function prepare_transport() that returns a transport
to talk to a given remote.
The set_option() helper that used to always affect the file-scope
global "gtransport" now takes a transport as its parameter.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Although many functions in this file take a "struct transport" as a
parameter, "fetch_one()" assigns to the global singleton instance
which is a file-scope static, in order to allow a parameterless
signal handler unlock_pack() to access it.
Rename the variable to gtransport to make sure these uses stand out.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/cat-file-batch-optim:
Revert "cat-file: split --batch input lines on whitespace"
|
|
This reverts commit c334b87b30c1464a1ab563fe1fb8de5eaf0e5bac; the
update assumed that people only used the command to read from
"rev-list --objects" output, whose lines begin with a 40-hex object
name followed by a whitespace, but it turns out that scripts feed
random extended SHA-1 expressions (e.g. "HEAD:$pathname") in which
a whitespace has to be kept.
|
|
* ob/typofixes:
many small typofixes
|
|
Consolidate two messages phrased subtly differently without a good
reason.
* jc/rm-submodule-error-message:
builtin/rm.c: consolidate error reporting for removing submodules
|
|
* jx/clean-interactive:
git-clean: implement partial matching for selection
Documentation/git-clean: fix description for range
|
|
* jk/commit-how-to-abort-cherry-pick:
commit: tweak empty cherry pick advice for sequencer
|
|
Signed-off-by: Ondřej Bílka <neleai@seznam.cz>
Reviewed-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we refuse to make an empty commit, we check whether we
are in a cherry-pick in order to give better advice on how
to proceed. We instruct the user to repeat the commit with
"--allow-empty" to force the commit, or to use "git reset"
to skip it and abort the cherry-pick.
In the case of a single cherry-pick, the distinction between
skipping and aborting is not important, as there is no more
work to be done afterwards. When we are using the sequencer
to cherry pick a series of commits, though, the instruction
is confusing: does it skip this commit, or does it abort the
rest of the cherry-pick?
It does skip, after which the user can continue the
cherry-pick. This is the right thing to be advising the user
to do, but let's make it more clear what will happen, both
by using the word "skip", and by mentioning that the rest of
the sequence can be continued via "cherry-pick --continue"
(whether we skip or take the commit).
Noticed-by: Ramkumar Ramachandra <artagnon@gmail.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have two (not identical) copies of error reporting when
attempting to remove submodules that have their repositories
embedded within them. Add a helper function so that we do not have
to repeat similar error messages with subtly different wording
without a good reason.
Noticed by Jiang Xin.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If somebody wants to only know on-disk footprint of an object
without having to know its type or payload size, we can bypass a
lot of code to cheaply learn it.
* jk/cat-file-batch-optim:
Fix some sparse warnings
sha1_object_info_extended: pass object_info to helpers
sha1_object_info_extended: make type calculation optional
packed_object_info: make type lookup optional
packed_object_info: hoist delta type resolution to helper
sha1_loose_object_info: make type lookup optional
sha1_object_info_extended: rename "status" to "type"
cat-file: disable object/refname ambiguity check for batch mode
|
|
Assorted code cleanups and a minor fix.
* sb/misc-fixes:
diff.c: Do not initialize a variable, which gets reassigned anyway.
commit: Fix a memory leak in determine_author_info
daemon.c:handle: Remove unneeded check for null pointer.
|
|
Document for interactive git-clean says: "You also could say `c` or
`clean` above as long as the choice is unique". But it's not true,
because only hotkey `c` and full match (`clean`) could work.
Implement partial matching via find_unique function to make the
document right.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Corrects the longstanding sloppiness in the implementation of
name-rev that conflated "we take commit-ish" and "differences
between tags and commits do not matter".
* jc/name-rev-exact-ref:
describe: fix --contains when a tag is given as input
name-rev: differentiate between tags and commits they point at
describe: use argv-array
name-rev: allow converting the exact object name at the tip of a ref
name-ref: factor out name shortening logic from name_ref()
|
|
A new command to allow scripts to query the mailmap information.
* es/check-mailmap:
t4203: test check-mailmap command invocation
builtin: add git-check-mailmap command
|
|
Add "interactive" mode to "git clean".
The early part to refactor relative path related helper functions
looked sensible.
* jx/clean-interactive:
test: run testcases with POSIX absolute paths on Windows
test: add t7301 for git-clean--interactive
git-clean: add documentation for interactive git-clean
git-clean: add ask each interactive action
git-clean: add select by numbers interactive action
git-clean: add filter by pattern interactive action
git-clean: use a git-add-interactive compatible UI
git-clean: add colors to interactive git-clean
git-clean: show items of del_list in columns
git-clean: add support for -i/--interactive
git-clean: refactor git-clean into two phases
write_name{_quoted_relative,}(): remove redundant parameters
quote_path_relative(): remove redundant parameter
quote.c: substitute path_relative with relative_path
path.c: refactor relative_path(), not only strip prefix
test: add test cases for relative_path
|
|
Allow configuration data to be read from in-tree blob objects,
which would help working in a bare repository and submodule
updates.
* hv/config-from-blob:
do not die when error in config parsing of buf occurs
teach config --blob option to parse config from database
config: make parsing stack struct independent from actual data source
config: drop cf validity check in get_next_char()
config: factor out config file stack management
|
|
* nd/const-struct-cache-entry:
Convert "struct cache_entry *" to "const ..." wherever possible
|
|
Use the function attributes extension to catch mistakes in use of
our own variadic functions that use NULL sentinel at the end
(i.e. like execl(3)) and format strings (i.e. like printf(3)).
* jk/gcc-function-attributes:
Add the LAST_ARG_MUST_BE_NULL macro
wt-status: use "format" function attribute for status_printf
use "sentinel" function attribute for variadic lists
add missing "format" function attributes
|
|
The "--head" option to "git show-ref" was only to add "HEAD" to the
list of candidate refs to be filtered by the usual rules
(e.g. "--heads" that only show refs under refs/heads). Change the
meaning of the option to always show "HEAD" regardless of what
filtering will be applied to any other ref (this is a backward
incompatible change, so I may need to add an entry to the Release
Notes).
* db/show-ref-head:
show-ref: make --head always show the HEAD ref
|
|
* tr/do-not-call-submodules-subprojects:
show-branch: fix description of --date-order
apply, entry: speak of submodules instead of subprojects
|
|
A finishing touch to fix breakage to "add -e" caused by defaulting
ui.color to "auto".
* mm/color-auto-default:
git add -e: Explicitly specify that patch should have no color
|
|
The name marc.theaimsgroup.com is no longer active, and has
migrated to marc.info.
Signed-off-by: Ondřej Bílka <neleai@seznam.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ph/builtin-srcs-are-in-subdir-these-days:
fix "builtin-*" references to be "builtin/*"
|
|
After 4c7f1819 (make color.ui default to 'auto', 2013-06-10), the
patch file to be edited during 'git add -e' receives all the color
codes. This is because diffopt.use_color defaults to -1, which
causes want_color to now return 'auto'.
By explicitly setting use_color to 0, we can ensure the diff output
has no color codes in it.
Signed-off-by: Andrew Wong <andrew.kw.w@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
The variable len is set to
len = strchrnul(line, '\n') - line;
unconditionally 9 lines later, hence we can remove the call to strlen.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rs/logical-vs-binary-or:
use logical OR (||) instead of binary OR (|) in logical context
|
|
The sentinel function attribute is not understood by versions of
the gcc compiler prior to v4.0. At present, for earlier versions
of gcc, the build issues 108 warnings related to the unknown
attribute. In order to suppress the warnings, we conditionally
define the LAST_ARG_MUST_BE_NULL macro to provide the sentinel attribute
for gcc v4.0 and newer.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
