| Age | Commit message (Collapse) | Author |
|---|
|
Preliminary clean-up of the refs API in preparation for adding a
new refs backend "reftable".
* hn/reftable:
reflog: cleanse messages in the refs.c layer
bisect: treat BISECT_HEAD as a pseudo ref
t3432: use git-reflog to inspect the reflog for HEAD
lib-t6000.sh: write tag using git-update-ref
|
|
"git clone --separate-git-dir=$elsewhere" used to stomp on the
contents of the existing directory $elsewhere, which has been
taught to fail when $elsewhere is not an empty directory.
* bw/fail-cloning-into-non-empty:
git clone: don't clone into non-empty directory
|
|
Updates to the changed-paths bloom filter.
* ds/commit-graph-bloom-updates:
commit-graph: check all leading directories in changed path Bloom filters
revision: empty pathspecs should not use Bloom filters
revision.c: fix whitespace
commit-graph: check chunk sizes after writing
commit-graph: simplify chunk writes into loop
commit-graph: unify the signatures of all write_graph_chunk_*() functions
commit-graph: persist existence of changed-paths
bloom: fix logic in get_bloom_filter()
commit-graph: change test to die on parse, not load
commit-graph: place bloom_settings in context
|
|
Fix to the code to produce progress bar, which is new in the
upcoming release.
* tb/commit-graph-no-check-oids:
commit-graph: fix "Collecting commits from input" progress line
|
|
To display a progress line while reading commits from standard input
and looking them up, 5b6653e523 (builtin/commit-graph.c: dereference
tags in builtin, 2020-05-13) should have added a pair of
start_delayed_progress() and stop_progress() calls around the loop
reading stdin. Alas, the stop_progress() call ended up at the wrong
place, after write_commit_graph(), which does all the commit-graph
computation and writing, and has several progress lines of its own.
Consequently, that new
Collecting commits from input: 1234
progress line is overwritten by the first progress line shown by
write_commit_graph(), and its final "done" line is shown last, after
everything is finished:
$ { sleep 3 ; git rev-list -3 HEAD ; sleep 1 ; } | ~/src/git/git commit-graph write --stdin-commits
Expanding reachable commits in commit graph: 873402, done.
Writing out commit graph in 4 passes: 100% (3493608/3493608), done.
Collecting commits from input: 3, done.
Furthermore, that stop_progress() call was added after the 'cleanup'
label, where that loop reading stdin jumps in case of an error. In
case of invalid input this then results in the "done" line shown after
the error message:
$ { sleep 3 ; git rev-list -3 HEAD ; echo junk ; } | ~/src/git/git commit-graph write --stdin-commits
error: unexpected non-hex object ID: junk
Collecting commits from input: 3, done.
Move that stop_progress() call to the right place.
While at it, drop the unnecessary 'if (progress)' condition protecting
the stop_progress() call, because that function is prepared to handle
a NULL progress struct.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both the git-bisect.sh as bisect--helper inspected the file system
directly.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When using git clone with --separate-git-dir realgitdir and
realgitdir already exists, it's content is destroyed.
So, make sure we don't clone into an existing non-empty directory.
When d45420c1 (clone: do not clean up directories we didn't create,
2018-01-02) tightened the clean-up procedure after a failed cloning
into an empty directory, it assumed that the existing directory
given is an empty one so it is OK to keep that directory, while
running the clean-up procedure that is designed to remove everything
in it (since there won't be any, anyway). Check and make sure that
the $GIT_DIR is empty even cloning into an existing repository.
Signed-off-by: Ben Wijen <ben@wijen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recent update to "git diff" meant as a code clean-up introduced a
bug in its error handling code, which has been corrected.
* ct/diff-with-merge-base-clarification:
diff: check for merge bases before assigning sym->base
|
|
Doc/usage update.
* cc/cat-file-usage-update:
cat-file: add missing [=<format>] to usage/synopsis
|
|
In symdiff_prepare(), we iterate over the set of parsed objects to pick
out any symmetric differences, including the left, right, and base
elements. We assign the results into pointers in a "struct symdiff", and
then complain if we didn't find a base, like so:
sym->left = rev->pending.objects[lpos].name;
sym->right = rev->pending.objects[rpos].name;
sym->base = rev->pending.objects[basepos].name;
if (basecount == 0)
die(_("%s...%s: no merge base"), sym->left, sym->right);
But the least lines are backwards. If basecount is 0, then basepos will
be -1, and we will access memory outside of the pending array. This
isn't usually that big a deal, since we don't do anything besides a
single pointer-sized read before exiting anyway, but it does violate the
C standard, and of course memory-checking tools like ASan complain.
Let's put the basecount check first. Note that we haveto split it from
the other assignments, since the die() relies on sym->left and
sym->right having been assigned (this isn't strictly necessary, but is
easier to read than dereferencing the pending array again).
Reported-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fast-export --anonymize" learned to take customized mapping to
allow its users to tweak its output more usable for debugging.
* jk/fast-export-anonym-alt:
fast-export: use local array to store anonymized oid
fast-export: anonymize "master" refname
fast-export: allow seeding the anonymized mapping
fast-export: add a "data" callback parameter to anonymize_str()
fast-export: move global "idents" anonymize hashmap into function
fast-export: use a flex array to store anonymized entries
fast-export: stop storing lengths in anonymized hashmaps
fast-export: tighten anonymize_mem() interface to handle only strings
fast-export: store anonymized oids as hex strings
fast-export: use xmemdupz() for anonymizing oids
t9351: derive anonymized tree checks from original repo
|
|
The name of the primary branch in existing repositories, and the
default name used for the first branch in newly created
repositories, is made configurable, so that we can eventually wean
ourselves off of the hardcoded 'master'.
* js/default-branch-name:
contrib: subtree: adjust test to change in fmt-merge-msg
testsvn: respect `init.defaultBranch`
remote: use the configured default branch name when appropriate
clone: use configured default branch name when appropriate
init: allow setting the default for the initial branch name via the config
init: allow specifying the initial branch name for the new repository
docs: add missing diamond brackets
submodule: fall back to remote's HEAD for missing remote.<name>.branch
send-pack/transport-helper: avoid mentioning a particular branch
fmt-merge-msg: stop treating `master` specially
|
|
Code clean-up.
* cb/is-descendant-of:
commit-reach: avoid is_descendant_of() shim
|
|
API cleanup for get_worktrees()
* es/get-worktrees-unsort:
worktree: drop get_worktrees() unused 'flags' argument
worktree: drop get_worktrees() special-purpose sorting option
|
|
A few fields in "struct commit" that do not have to always be
present have been moved to commit slabs.
* ak/commit-graph-to-slab:
commit-graph: minimize commit_graph_data_slab access
commit: move members graph_pos, generation to a slab
commit-graph: introduce commit_graph_data_slab
object: drop parsed_object_pool->commit_count
|
|
SHA-256 migration work continues.
* bc/sha-256-part-2: (44 commits)
remote-testgit: adapt for object-format
bundle: detect hash algorithm when reading refs
t5300: pass --object-format to git index-pack
t5704: send object-format capability with SHA-256
t5703: use object-format serve option
t5702: offer an object-format capability in the test
t/helper: initialize the repository for test-sha1-array
remote-curl: avoid truncating refs with ls-remote
t1050: pass algorithm to index-pack when outside repo
builtin/index-pack: add option to specify hash algorithm
remote-curl: detect algorithm for dumb HTTP by size
builtin/ls-remote: initialize repository based on fetch
t5500: make hash independent
serve: advertise object-format capability for protocol v2
connect: parse v2 refs with correct hash algorithm
connect: pass full packet reader when parsing v2 refs
Documentation/technical: document object-format for protocol v2
t1302: expect repo format version 1 for SHA-256
builtin/show-index: provide options to determine hash algo
t5302: modernize test formatting
...
|
|
When displaying cat-file usage, the fact that a <format> can
be specified is only visible when lookling at the --batch and
--batch-check options which are shown like this:
--batch[=<format>] show info and content of objects fed from the standard input
--batch-check[=<format>]
show info about objects fed from the standard input
It seems more coherent and improves discovery to also show it
on the usage line.
In the documentation the DESCRIPTION tells us that "The output
format can be overridden using the optional <format> argument",
but we can't see the <format> argument in the SYNOPSIS above
the description which is confusing.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The changed-path Bloom filters were released in v2.27.0, but have a
significant drawback. A user can opt-in to writing the changed-path
filters using the "--changed-paths" option to "git commit-graph write"
but the next write will drop the filters unless that option is
specified.
This becomes even more important when considering the interaction with
gc.writeCommitGraph (on by default) or fetch.writeCommitGraph (part of
features.experimental). These config options trigger commit-graph writes
that the user did not signal, and hence there is no --changed-paths
option available.
Allow a user that opts-in to the changed-path filters to persist the
property of "my commit-graph has changed-path filters" automatically. A
user can drop filters using the --no-changed-paths option.
In the process, we need to be extremely careful to match the Bloom
filter settings as specified by the commit-graph. This will allow future
versions of Git to customize these settings, and the version with this
change will persist those settings as commit-graphs are rewritten on
top.
Use the trace2 API to signal the settings used during the write, and
check that output in a test after manually adjusting the correct bytes
in the commit-graph file.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git diff-files" has been taught to say paths that are marked as
intent-to-add are new files, not modified from an empty blob.
* sk/diff-files-show-i-t-a-as-new:
diff-files: treat "i-t-a" files as "not-in-index"
|
|
Leakfix.
* rs/pull-leakfix:
pull: plug minor memory leak after using is_descendant_of()
|
|
An in-code comment in "git diff" has been updated.
* dl/diff-usage-comment-update:
builtin/diff: fix botched update of usage comment
builtin/diff: update usage comment
|
|
Allow runtime upgrade of the repository format version, which needs
to be done carefully.
There is a rather unpleasant backward compatibility worry with the
last step of this series, but it is the right thing to do in the
longer term.
* xl/upgrade-repo-format:
check_repository_format_gently(): refuse extensions for old repositories
sparse-checkout: upgrade repository to version 1 when enabling extension
fetch: allow adding a filter after initial clone
repository: add a helper function to perform repository format upgrade
|
|
Some older versions of gcc complain about this line:
builtin/fast-export.c:412:2: error: dereferencing type-punned pointer
will break strict-aliasing rules [-Werror=strict-aliasing]
put_be32(oid.hash + hashsz - 4, counter++);
^
This seems to be a false positive, as there's no type-punning at all
here. oid.hash is an array of unsigned char; when we pass it to a
function it decays to a pointer to unsigned char. We do take a void
pointer in put_be32(), but it's immediately aliased with another pointer
to unsigned char (and clearly the compiler is looking inside the inlined
put_be32(), since the warning doesn't happen with -O0).
This happens on gcc 4.8 and 4.9, but not later versions (I tested gcc 6,
7, 8, and 9).
We can work around it by using a local array instead of an object_id
struct. This is a little more intimate with the details of object_id,
but for whatever reason doesn't seem to trigger the compiler warning.
We can revert this patch once we decide that those gcc versions are too
old to care about for a warning like this (gcc 4.8 is the default
compiler for Ubuntu Trusty, which is out-of-support but not fully
end-of-life'd until April 2022).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Running "fast-export --anonymize" will leave "refs/heads/master"
untouched in the output, for two reasons:
- it helped to have some known reference point between the original
and anonymized repository
- since it's historically the default branch name, it doesn't leak any
information
Now that we can ask fast-export to retain particular tokens, we have a
much better tool for the first one (because it works for any ref, not
just master).
For the second, the notion of "default branch name" is likely to become
configurable soon, at which point the name _does_ leak information.
Let's drop this special case in preparation.
Note that we have to adjust the test a bit, since it relied on using the
name "master" in the anonymized repos. We could just use
--anonymize-map=master to keep the same output, but then we wouldn't
know if it works because of our hard-coded master or because of the
explicit map.
So let's flip the test a bit, and confirm that we anonymize "master",
but keep "other" in the output.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After you anonymize a repository, it can be hard to find which commits
correspond between the original and the result, and thus hard to
reproduce commands that triggered bugs in the original.
Let's make it possible to seed the anonymization map. This lets users
either:
- mark names to be retained as-is, if they don't consider them secret
(in which case their original commands would just work)
- map names to new values, which lets them adapt the reproduction
recipe to the new names without revealing the originals
The implementation is fairly straight-forward. We already store each
anonymized token in a hashmap (so that the same token appearing twice is
converted to the same result). We can just introduce a new "seed"
hashmap which is consulted first.
This does make a few more promises to the user about how we'll anonymize
things (e.g., token-splitting pathnames). But it's unlikely that we'd
want to change those rules, even if the actual anonymization of a single
token changes. And it makes things much easier for the user, who can
unblind only a directory name without having to specify each path within
it.
One alternative to this approach would be to anonymize as we see fit,
and then dump the whole refname and pathname mappings to a file. This
does work, but it's a bit awkward to use (you have to manually dig the
items you care about out of the mapping).
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "fetch/clone" protocol has been updated to allow the server to
instruct the clients to grab pre-packaged packfile(s) in addition
to the packed object data coming over the wire.
* jt/cdn-offload:
upload-pack: fix a sparse '0 as NULL pointer' warning
upload-pack: send part of packfile response as uri
fetch-pack: support more than one pack lockfile
upload-pack: refactor reading of pack-objects out
Documentation: add Packfile URIs design doc
Documentation: order protocol v2 sections
http-fetch: support fetching packfiles by URL
http-fetch: refactor into function
http: refactor finish_http_pack_request()
http: use --stdin when indexing dumb HTTP pack
|
|
Rewrite of parts of the scripted "git submodule" Porcelain command
continues; this time it is "git submodule set-branch" subcommand's
turn.
* ss/submodule-set-branch-in-c:
submodule: port subcommand 'set-branch' from shell to C
|
|
Code clean-up around "git branch" with a minor bugfix.
* dl/branch-cleanup:
branch: don't mix --edit-description
t3200: test for specific errors
t3200: rename "expected" to "expect"
|
|
"git diff" used to take arguments in random and nonsense range
notation, e.g. "git diff A..B C", "git diff A..B C...D", etc.,
which has been cleaned up.
* ct/diff-with-merge-base-clarification:
Documentation: usage for diff combined commits
git diff: improve range handling
t/t3430: avoid undefined git diff behavior
|
|
Code clean-up of "git clean" resulted in a fix of recent
performance regression.
* en/clean-cleanups:
clean: optimize and document cases where we recurse into subdirectories
clean: consolidate handling of ignored parameters
dir, clean: avoid disallowed behavior
dir: fix a few confusing comments
|
|
When cloning a repository without any branches, Git chooses a default
branch name for the as-yet unborn branch.
As part of the implicit initialization of the local repository, Git just
learned to respect `init.defaultBranch` to choose a different initial
branch name. We now really want that branch name to be used as a
fall-back.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We just introduced the command-line option
`--initial-branch=<branch-name>` to allow initializing a new repository
with a different initial branch than the hard-coded one.
To allow users to override the initial branch name more permanently
(i.e. without having to specify the name manually for each and every
`git init` invocation), let's introduce the `init.defaultBranch` config
setting.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Don Goodman-Wilson <don@goodman-wilson.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is a growing number of projects and companies desiring to change
the main branch name of their repositories (see e.g.
https://twitter.com/mislav/status/1270388510684598272 for background on
this).
To change that branch name for new repositories, currently the only way
to do that automatically is by copying all of Git's template directory,
then hard-coding the desired default branch name into the `.git/HEAD`
file, and then configuring `init.templateDir` to point to those copied
template files.
To make this process much less cumbersome, let's introduce a new option:
`--initial-branch=<branch-name>`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When `remote.<name>.branch` is not configured, `git submodule update`
currently falls back to using the branch name `master`. A much better
idea, however, is to use the remote `HEAD`: on all Git servers running
reasonably recent Git versions, the symref `HEAD` points to the main
branch.
Note: t7419 demonstrates that there _might_ be use cases out there that
_expect_ `git submodule update --remote` to update submodules to the
remote `master` branch even if the remote `HEAD` points to another
branch. Arguably, this patch makes the behavior more intuitive, but
there is a slight possibility that this might cause regressions in
obscure setups.
Even so, it should be okay to fix this behavior without anything like a
longer transition period:
- The `git submodule update --remote` command is not really common.
- Current Git's behavior when running this command is outright
confusing, unless the remote repository's current branch _is_ `master`
(in which case the proposed behavior matches the old behavior).
- If a user encounters a regression due to the changed behavior, the fix
is actually trivial: setting `submodule.<name>.branch` to `master`
will reinstate the old behavior.
Helped-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The anonymize_str() function takes a generator callback, but there's no
way to pass extra context to it. Let's add the usual "void *data"
parameter to the generator interface and pass it along.
This is mildly annoying for existing callers, all of which pass NULL,
but is necessary to avoid extra globals in some cases we'll add in a
subsequent patch.
While we're touching each of these callbacks, we can further observe
that none of them use the existing orig/len parameters at all. This
makes sense, since the point is for their output to have no discernable
basis in the original (my original version had some notion that we might
use a one-way function to obfuscate the names, but it was never
implemented). So let's drop those extra parameters. If a caller really
wants to do something with them, it can pass a struct through the new
data parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All of the other anonymization functions keep their static mappings
inside the function to avoid polluting the global namespace. Let's do
the same for "idents", as nobody needs it outside of
anonymize_ident_line().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that we're using a separate keydata struct for hash lookups, we have
more flexibility in how we allocate anonymized_entry structs. Let's push
the "orig" key into a flex member within the struct. That should save us
a few bytes of memory per entry (a pointer plus any malloc overhead),
and may make lookups a little faster (since it's one less pointer to
chase in the comparison function).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that the anonymize_str() interface is restricted to NUL-terminated
strings, there's no need for us to keep track of the length of each
entry in the hashmap. This simplifies the code and saves a bit of
memory.
Note that we do still need to compare the stored results to partial
strings passed in by the callers. We can do that by using hashmap's
keydata feature to get the ptr/len pair into the comparison function,
and then using strncmp().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While the anonymize_mem() interface _can_ store arbitrary byte
sequences, none of the callers uses this feature (as of the previous
commit). We'd like to keep it that way, as we'll be exposing the
string-like nature of the anonymization routines to the user. So let's
tighten up the interface a bit:
- don't treat "len" as an out-parameter from anonymize_mem(); this
ensures callers treat the pointer result as a NUL-terminated string
- likewise, don't treat "len" as an out-parameter from generator
functions
- swap out "void *" for "char *" as appropriate to signal that we
don't handle arbitrary memory
- rename the function to anonymize_str()
This will also open up some optimization opportunities in a future
patch.
Note that we can't drop the "len" parameter entirely. Some callers do
pass in partial strings (e.g., "foo/bar", len=3) to avoid copying, and
we need to handle those still.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When fast-export stores anonymized oids, it does so as binary strings.
And while the anonymous mapping storage is binary-clean (at least as of
the previous commit), this will become awkward when we start exposing
more of it to the user. In particular, if we allow a method for
retaining token "foo", then users may want to specify a hex oid as such
a token.
Let's just switch to storing the hex strings. The difference in memory
usage is negligible (especially considering how infrequently we'd
generally store an oid compared to, say, path components).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our anonymize_mem() function is careful to take a ptr/len pair to allow
storing binary tokens like object ids, as well as partial strings (e.g.,
just "foo" of "foo/bar"). But it duplicates the hash key using
xstrdup()! That means that:
- for a partial string, we'd store all bytes up to the NUL, even
though we'd never look at anything past "len". This didn't produce
wrong behavior, but was wasteful.
- for a binary oid that doesn't contain a zero byte, we'd copy garbage
bytes off the end of the array (though as long as nothing complained
about reading uninitialized bytes, further reads would be limited by
"len", and we'd produce the correct results)
- for a binary oid that does contain a zero byte, we'd copy _fewer_
bytes than intended into the hashmap struct. When we later try to
look up a value, we'd access uninitialized memory and potentially
falsely claim that a particular oid is not present.
The most common reason to store an oid is an anonymized gitlink, but our
test case doesn't have any gitlinks at all. So let's add one whose oid
contains a NUL and is present at two different paths. ASan catches the
memory error, but even without it we can detect the bug because the oid
is not anonymized the same way for both paths.
And of course the fix is to copy the correct number of bytes. We don't
technically need the appended NUL from xmemdupz(), but it doesn't hurt
as an extra protection against anybody treating it like a string (plus a
future patch will push us more in that direction).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the previous commit, an attempt was made to correct the "N=1, M=0"
case. However, the fix was botched and it introduced two half-correct
sections by mistake. Combine these half-correct sections into one fully
correct section.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
d91d6fbf26 (commit-reach: create repo_is_descendant_of(), 2020-06-17)
adds a repository aware version of is_descendant_of() and a backward
compatibility shim that is barely used.
Update all callers to directly use the new repo_is_descendant_of()
function instead; making the codebase simpler and pushing more
the_repository references higher up the stack.
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The same worktree directory must be registered only once, but
"git worktree move" allowed this invariant to be violated, which
has been corrected.
* es/worktree-duplicate-paths:
worktree: make "move" refuse to move atop missing registered worktree
worktree: generalize candidate worktree path validation
worktree: prune linked worktree referencing main worktree path
worktree: prune duplicate entries referencing same worktree path
worktree: make high-level pruning re-usable
worktree: give "should be pruned?" function more meaningful name
worktree: factor out repeated string literal
|
|
The `diff-files' command and related commands which call the function
`cmd_diff_files()', consider the "intent-to-add" files as a part of the
index when comparing the work-tree against it. This was previously
addressed in commits [1] and [2] by turning the option
`--ita-invisible-in-index' (introduced in [3]) on by default.
For `diff-files' (and `add -p' as a consequence) to show the i-t-a
files as as new, `ita_invisible_in_index' will be enabled by default
here as well.
[1] 0231ae71d3 (diff: turn --ita-invisible-in-index on by default,
2018-05-26)
[2] 425a28e0a4 (diff-lib: allow ita entries treated as "not yet exist
in index", 2016-10-24)
[3] b42b451919 (diff: add --ita-[in]visible-in-index, 2016-10-24)
Signed-off-by: Srinidhi Kaushik <shrinidhi.kaushik@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
get_worktrees() accepts a 'flags' argument, however, there are no
existing flags (the lone flag GWT_SORT_LINKED was recently retired) and
no behavior which can be tweaked. Therefore, drop the 'flags' argument.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Of all the clients of get_worktrees(), only "git worktree list" wants
the list sorted in a very specific way; other clients simply don't care
about the order. Rather than imbuing get_worktrees() with special
knowledge about how various clients -- now and in the future -- may want
the list sorted, drop the sorting capability altogether and make it the
client's responsibility to sort the list if needed.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git index-pack is usually run in a repository, but need not be. Since
packs don't contains information on the algorithm in use, instead
relying on context, add an option to index-pack to tell it which one
we're using in case someone runs it outside of a repository. Since
using --stdin necessarily implies a repository, don't allow specifying
an object format if it's provided to prevent users from passing an
option that won't work. Add documentation for this option.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
cmd_pull() builds a commit_list to pass a single potential ancestor to
is_descendant_of(). The latter leaves the list intact. Release the
allocated memory after the call.
Leaking in cmd_*() isn't a big deal, but sets a bad example for other
users of is_descendant_of().
Signed-off-by: René Scharfe <l.s.r@web.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A comment in cmd_diff() states that if one tree-ish and no blobs are
provided, (the "N=1, M=0" case), it will provide a diff between the tree
and the cache. This is incorrect because a diff happens between the
tree-ish and the working tree. Remove the `--cached` in the comment so
that the correct behavior is shown. Add a new section describing the
"N=1, M=0, --cached" behavior.
Next, describe the "N=0, M=0, --cached" case, similar to the above since
it is undocumented.
Finally, fix some spacing issues. Add spaces between each section for
consistency and readability. Also, change tabs within the comment into
spaces.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
