| Age | Commit message (Collapse) | Author |
|---|
|
Further prepare pack-objects to perform verbatim pack-reuse over
multiple packfiles by converting functions that take in a pointer to a
`struct packed_git` to instead take in a pointer to a `struct
bitmapped_pack`.
The additional information found in the bitmapped_pack struct (such as
the bit position corresponding to the beginning of the pack) will be
necessary in order to perform verbatim pack-reuse.
Note that we don't use any of the extra pieces of information contained
in the bitmapped_pack struct, so this step is merely preparatory and
does not introduce any functional changes.
Note further that we do not change the argument type to
write_reused_pack_one(). That function is responsible for copying
sections of the packfile directly and optionally patching any OFS_DELTAs
to account for not reusing sections of the packfile in between a delta
and its base.
As such, that function is (and should remain) oblivious to multi-pack
reuse, and does not require any of the extra pieces of information
stored in the bitmapped_pack struct.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When reusing objects from a pack, we keep track of a set of one or more
`reused_chunk`s, corresponding to sections of one or more object(s) from
a source pack that we are reusing. Each chunk contains two pieces of
information:
- the offset of the first object in the source pack (relative to the
beginning of the source pack)
- the difference between that offset, and the corresponding offset in
the pack we're generating
The purpose of keeping track of these is so that we can patch an
OFS_DELTAs that cross over a section of the reuse pack that we didn't
take.
For instance, consider a hypothetical pack as shown below:
(chunk #2)
__________...
/
/
+--------+---------+-------------------+---------+
... | <base> | <other> | (unused) | <delta> | ...
+--------+---------+-------------------+---------+
\ /
\______________/
(chunk #1)
Suppose that we are sending objects "base", "other", and "delta", and
that the "delta" object is stored as an OFS_DELTA, and that its base is
"base". If we don't send any objects in the "(unused)" range, we can't
copy the delta'd object directly, since its delta offset includes a
range of the pack that we didn't copy, so we have to account for that
difference when patching and reassembling the delta.
In order to compute this value correctly, we need to know not only where
we are in the packfile we're assembling (with `hashfile_total(f)`) but
also the position of the first byte of the packfile that we are
currently reusing. Currently, this works just fine, since when reusing
only a single pack those two values are always identical (because
verbatim reuse is the first thing pack-objects does when enabled after
writing the pack header).
But when reusing multiple packs which have one or more gaps, we'll need
to account for these two values diverging.
Together, these two allow us to compute the reused chunk's offset
difference relative to the start of the reused pack, as desired.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The routines pack-objects uses to perform verbatim pack-reuse are:
- write_reused_pack_one()
- write_reused_pack_verbatim()
- write_reused_pack()
, all of which assume that there is exactly one packfile being reused:
the global constant `reuse_packfile`.
Prepare for reusing objects from multiple packs by making reuse packfile
a parameter of each of the above functions in preparation for calling
these functions in a loop with multiple packfiles.
Note that we still have the global "reuse_packfile", but pass it through
each of the above function's parameter lists, eliminating all but one
direct access (the top-level caller in `write_pack_file()`). Even after
this series, we will still have a global, but it will hold the array of
reusable packfiles, and we'll pass them one at a time to these functions
in a loop.
Note also that we will eventually need to pass a `bitmapped_pack`
instead of a `packed_git` in order to hold onto additional information
required for reuse (such as the bit position of the first object
belonging to that pack). But that change will be made in a future commit
so as to minimize the noise below as much as possible.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Further prepare for enabling verbatim pack-reuse over multiple packfiles
by changing the signature of reuse_partial_packfile_from_bitmap() to
populate an array of `struct bitmapped_pack *`'s instead of a pointer to
a single packfile.
Since the array we're filling out is sized dynamically[^1], add an
additional `size_t *` parameter which will hold the number of reusable
packs (equal to the number of elements in the array).
Note that since we still have not implemented true multi-pack reuse,
these changes aren't propagated out to the rest of the caller in
builtin/pack-objects.c.
In the interim state, we expect that the array has a single element, and
we use that element to fill out the static `reuse_packfile` variable
(which is a bog-standard `struct packed_git *`). Future commits will
continue to push this change further out through the pack-objects code.
[^1]: That is, even though we know the number of packs which are
candidates for pack-reuse, we do not know how many of those
candidates we can actually reuse.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The signature of `reuse_partial_packfile_from_bitmap()` currently takes
in a bitmap, as well as three output parameters (filled through
pointers, and passed as arguments), and also returns an integer result.
The output parameters are filled out with: (a) the packfile used for
pack-reuse, (b) the number of objects from that pack that we can reuse,
and (c) a bitmap indicating which objects we can reuse. The return value
is either -1 (when there are no objects to reuse), or 0 (when there is
at least one object to reuse).
Some of these parameters are redundant. Notably, we can infer from the
bitmap how many objects are reused by calling bitmap_popcount(). And we
can similar compute the return value based on that number as well.
As such, clean up the signature of this function to drop the "*entries"
parameter, as well as the int return value, since the single caller of
this function can infer these values themself.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The pack-objects internals use a packing_data struct to track what
objects are part of the pack(s) being formed.
Since these structures contain allocated fields, failing to
appropriately free() them results in a leak. Plug that leak by
introducing a clear_packing_data() function, and call it in the
appropriate spots.
This is a fairly straightforward leak to plug, since none of the callers
expect to read any values or have any references to parts of the address
space being freed.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We're inconsistently writing BISECT_EXPECTED_REV both via the filesystem
and via the refdb, which violates the newly established rules for how
special refs must be treated. This works alright in practice with the
reffiles reference backend, but will cause bugs once we gain additional
backends.
Fix this issue and consistently write BISECT_EXPECTED_REV via the refdb
so that it is no longer a special ref.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git checkout -B <branch> [<start-point>]", being a "forced" version
of "-b", switches to the <branch>, after optionally resetting its
tip to the <start-point>, even if the <branch> is in use in another
worktree, which is somewhat unexpected.
Protect the <branch> using the same logic that forbids "git checkout
<branch>" from touching a branch that is in use elsewhere.
This is a breaking change that may deserve backward compatibliity
warning in the Release Notes. The "--ignore-other-worktrees" option
can be used as an escape hatch if the finger memory of existing
users depend on the current behaviour of "-B".
Reported-by: Willem Verstraeten <willem.verstraeten@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We're currently creating the reference database with a potentially
incorrect object format when the remote repository's object format is
different from the local default object format. This works just fine for
now because the files backend never records the object format anywhere.
But this logic will fail with any new reference backend that encodes
this information in some form either on-disk or in-memory.
The preceding commits have reshuffled code in git-clone(1) so that there
is no code path that will access the reference database before we have
detected the remote's object format. With these refactorings we can now
defer initialization of the reference database until after we have
learned the remote's object format and thus initialize it with the
correct format from the get-go.
These refactorings are required to make git-clone(1) work with the
upcoming reftable backend when cloning repositories with the SHA256
object format.
This change breaks a test in "t5550-http-fetch-dumb.sh" when cloning an
empty repository with `GIT_TEST_DEFAULT_HASH=sha256`. The test expects
the resulting hash format of the empty cloned repository to match the
default hash, but now we always end up with a sha1 repository. The
problem is that for dumb HTTP fetches, we have no easy way to figure out
the remote's hash function except for deriving it based on the hash
length of refs in `info/refs`. But as the remote repository is empty we
cannot rely on this detection mechanism.
Before the change in this commit we already initialized the repository
with the default hash function and then left it as-is. With this patch
we always use the hash function detected via the remote, where we fall
back to "sha1" in case we cannot detect it.
Neither the old nor the new behaviour are correct as we second-guess the
remote hash function in both cases. But given that this is a rather
unlikely edge case (we use the dumb HTTP protocol, the remote repository
uses SHA256 and the remote repository is empty), let's simply adapt the
test to assert the new behaviour. If we want to properly address this
edge case in the future we will have to extend the dumb HTTP protocol so
that we can properly detect the hash function for empty repositories.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After we have set up the remote configuration in git-clone(1) we'll call
`remote_get()` to read the remote from the on-disk configuration. But
next to reading the on-disk configuration, `remote_get()` will also
cause us to try and read the repository's HEAD reference so that we can
figure out the current branch. Besides being pointless in git-clone(1)
because we're operating in an empty repository anyway, this will also
break once we move creation of the reference database to a later point
in time.
Refactor the code to introduce a new `remote_get_early()` function that
will skip reading the HEAD reference to address this issue.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When asked to do a sparse checkout, then git-clone(1) will spawn
`git sparse-checkout set` to set up the configuration accordingly. This
requires a proper Git repository or otherwise the command will fail. But
as we are about to move creation of the reference database to a later
point, this prerequisite will not hold anymore.
Move the logic to a later point in time where we know to have created
the reference database already.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We create the reference database in git-clone(1) quite early before
connecting to the remote repository. Given that we do not yet know about
the object format that the remote repository uses at that point in time
the consequence is that the refdb may be initialized with the wrong
object format.
This is not a problem in the context of the files backend as we do not
encode the object format anywhere, and furthermore the only reference
that we write between initializing the refdb and learning about the
object format is the "HEAD" symref. It will become a problem though once
we land the reftable backend, which indeed does require to know about
the proper object format at the time of creation. We thus need to
rearrange the logic in git-clone(1) so that we only initialize the refdb
once we have learned about the actual object format.
As a first step, move listing of remote references to happen earlier,
which also allow us to set up the hash algorithm of the repository
earlier now. While we aim to execute this logic as late as possible
until after most of the setup has happened already, detection of the
object format and thus later the setup of the reference database must
happen before any other logic that may spawn Git commands or otherwise
these Git commands may not recognize the repository as such.
The first Git step where we expect the repository to be fully initalized
is when we fetch bundles via bundle URIs. Funny enough, the comments
there also state that "the_repository must match the cloned repo", which
is indeed not necessarily the case for the hash algorithm right now. So
in practice it is the right thing to detect the remote's object format
before downloading bundle URIs anyway, and not doing so causes clones
with bundle URIs to fail when the local default object format does not
match the remote repository's format.
Unfortunately though, this creates a new issue: downloading bundles may
take a long time, so if we list refs beforehand they might've grown
stale meanwhile. It is not clear how to solve this issue except for a
second reference listing though after we have downloaded the bundles,
which may be an expensive thing to do.
Arguably though, it's preferable to have a staleness issue compared to
being unable to clone a repository altogether.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the standard message for reporting the use of multiple mutually
exclusive options by calling die_for_incompatible_opt3() instead of
rolling our own. This has the benefits of showing only the actually
given options, reducing the number of strings to translate and making
the UI slightly more consistent.
Adjust the test to no longer insist on a specific order of the
reported options, as this implementation detail does not affect the
usefulness of the error message.
Reported-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase --autosquash" is now enabled for non-interactive rebase,
but it is still incompatible with the apply backend.
* ak/rebase-autosquash:
rebase: rewrite --(no-)autosquash documentation
rebase: support --autosquash without -i
rebase: fully ignore rebase.autoSquash without -i
|
|
"git for-each-ref --no-sort" still sorted the refs alphabetically
which paid non-trivial cost. It has been redefined to show output
in an unspecified order, to allow certain optimizations to take
advantage of.
* vd/for-each-ref-unsorted-optimization:
t/perf: add perf tests for for-each-ref
ref-filter.c: use peeled tag for '*' format fields
for-each-ref: clean up documentation of --format
ref-filter.c: filter & format refs in the same callback
ref-filter.c: refactor to create common helper functions
ref-filter.c: rename 'ref_filter_handler()' to 'filter_one()'
ref-filter.h: add functions for filter/format & format-only
ref-filter.h: move contains caches into filter
ref-filter.h: add max_count and omit_empty to ref_format
ref-filter.c: really don't sort when using --no-sort
|
|
"git format-patch --encode-email-headers" ignored the option when
preparing the cover letter, which has been corrected.
* ss/format-patch-use-encode-headers-for-cover-letter:
format-patch: fix ignored encode_email_headers for cover letter
|
|
"git add" and "git stash" learned to support the ":(attr:...)"
magic pathspec.
* jw/git-add-attr-pathspec:
attr: enable attr pathspec magic for git-add and git-stash
|
|
We parse push config by calling git_config() with our git_push_config()
callback. But inside that callback, when we see "push.gpgsign", we
ignore the value passed into the callback and instead make a new call to
git_config_get_value().
This is unnecessary at best, and slightly wrong at worst (if there are
multiple instances, get_value() only returns one; both methods end up
with last-one-wins, but we'd fail to report errors if earlier
incarnations were bogus).
The call was added by 68c757f219 (push: add a config option push.gpgSign
for default signed pushes, 2015-08-19). That commit doesn't give any
reason to deviate from the usual strategy here; it was probably just
somebody unfamiliar with our config API and its conventions.
It also added identical code to builtin/send-pack.c, which also handles
push.gpgsign.
And then the same issue spread to its neighbor in b33a15b081 (push: add
recurseSubmodules config option, 2015-11-17), presumably via
cargo-culting.
This patch fixes all three to just directly use the value provided to
the callback. While I was adjusting the code to do so, I noticed that
push.gpgsign is overly careful about a NULL value. After
git_parse_maybe_bool() has returned anything besides 1, we know that the
value cannot be NULL (if it were, it would be an implicit "true", and
many callers of maybe_bool rely on that). Here that lets us shorten "if
(v && !strcasecmp(v, ...))" to just "if (!strcasecmp(v, ...))".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When parsing fsck.*, receive.fsck.*, or fetch.fsck.*, we don't check for
an implicit bool. So any of:
[fsck]
badTree
[receive "fsck"]
badTree
[fetch "fsck"]
badTree
will cause us to segfault. We can fix it with config_error_nonbool() in
the usual way, but we have to make a few more changes to get good error
messages. The problem is that all three spots do:
if (skip_prefix(var, "fsck.", &var))
to match and parse the actual message id. But that means that "var" now
just says "badTree" instead of "receive.fsck.badTree", making the
resulting message confusing. We can fix that by storing the parsed
message id in its own separate variable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the config parser sees an "implicit" bool like:
[core]
someVariable
it passes NULL to the config callback. Any callback code which expects a
string must check for NULL. This usually happens via helpers like
git_config_string(), etc, but some custom code forgets to do so and will
segfault.
These are all fairly vanilla cases where the solution is just the usual
pattern of:
if (!value)
return config_error_nonbool(var);
though note that in a few cases we have to split initializers like:
int some_var = initializer();
into:
int some_var;
if (!value)
return config_error_nonbool(var);
some_var = initializer();
There are still some broken instances after this patch, which I'll
address on their own in individual patches after this one.
Reported-by: Carlos Andrés Ramírez Cataño <antaigroupltda@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Usually "bisect reset" cleans up any refs/bisect/ refs, along with
meta-files like .git/BISECT_LOG. But it only does so after deciding that
a bisection is active, which it does by reading BISECT_START. This is
usually fine, but it's possible to get into a confusing state if the
BISECT_START file is gone, but other cruft is left (this might be due to
a bug, or a system crash, etc).
And since "bisect reset" refuses to do anything in this state, the user
has no easy way to clean up the leftover cruft. While another "bisect
start" would clear the state, in the interim it can be annoying, as
other tools (like our bash prompt code) think we are bisecting, and
for-each-ref output may be polluted with refs/bisect/ entries.
Further adding to the confusion is that running "bisect reset $some_ref"
skips the BISECT_START check. So it never realizes that there's no
bisection active and does the cleanup anyway!
So let's just make sure we always do the cleanup, whether we looked at
BISECT_START or not. If the user doesn't give us a commit to reset to,
we'll still say "We are not bisecting" and skip the call to "git
checkout".
Reported-by: Janik Haag <janik@aq0.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use a single translatable string to report that the worktree add option
--orphan is incompatible with a commit-ish instead of having the
commit-ish in a separate translatable string. This reduces the number
of strings to translate and gives translators the full context.
A similar message is used in builtin/describe.c, but with the plural of
commit-ish, and here we need the singular form.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the standard parameterized message for reporting incompatible
options for worktree add. This reduces the number of strings to
translate and makes the UI slightly more consistent.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the standard parameterized message for reporting incompatible
options to inform users that they can't use -x and -X together. This
reduces the number of strings to translate and makes the UI slightly
more consistent.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the standard parameterized message for reporting incompatible
options to report options that are not accepted in combination with
--exclude-hidden. This reduces the number of strings to translate and
makes the UI a bit more consistent.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The repack option --keep-unreachable is incompatible with -A, --cruft is
incompatible with -A and -k, and -k is short for --keep-unreachable. So
they are all incompatible with each other.
Use the function for checking three mutually incompatible options,
die_for_incompatible_opt3(), to perform this check in one place and
without repetition. This is shorter and clearer.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The push option --delete is incompatible with --all, --mirror, and
--tags; --tags is incompatible with --all and --mirror; --all is
incompatible with --mirror. This means they are all incompatible with
each other. And --branches is an alias for --all.
Use the function for checking four mutually incompatible options,
die_for_incompatible_opt4(), to perform this check in one place and
without repetition. This is shorter and clearer.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Continue the work of 12909b6b8a (i18n: turn "options are incompatible"
into "cannot be used together", 2022-01-05) and a699367bb8 (i18n:
factorize more 'incompatible options' messages, 2022-01-31) to use the
same parameterized error message for reporting incompatible command line
options. This reduces the number of strings to translate and makes the
UI slightly more consistent.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Releasing strbuf and string_list just before exiting is not strictly
necessary, but it gets rid of false positives reported by leak checkers,
which can then be more easily used to show that the column-printing
machinery behind print_columns() are free of leaks.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The replay command is able to replay multiple branches but when some of
them are based on other replayed branches, their commit should be
replayed onto already replayed commits.
For this purpose, let's store the replayed commit and its original
commit in a key value store, so that we can easily find and reuse a
replayed commit instead of the original one.
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Let's add a `--contained` option that can be used along with
`--onto` to rebase all the branches contained in the <revision-range>
argument.
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is already a 'rebase' mode with `--onto`. Let's add an 'advance' or
'cherry-pick' mode with `--advance`. This new mode will make the target
branch advance as we replay commits onto it.
The replayed commits should have a single tip, so that it's clear where
the target branch should be advanced. If they have more than one tip,
this new mode will error out.
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of the fixed "<oldbase> <branch>" arguments, the replay
command now accepts "<revision-range>..." arguments in a similar
way as many other Git commands. This makes its interface more
standard and more flexible.
This also enables many revision related options accepted and
eaten by setup_revisions(). If the replay command was a high level
one or had a high level mode, it would make sense to restrict some
of the possible options, like those generating non-contiguous
history, as they could be confusing for most users.
Also as the interface of the command is now mostly finalized,
we can add more documentation and more testcases to make sure
the command will continue to work as designed in the future.
We only document the rev-list related options among all the
revision related options that are now accepted, as the rev-list
related ones are probably the most useful for now.
Helped-by: Dragan Simic <dsimic@manjaro.org>
Helped-by: Linus Arver <linusa@google.com>
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We want this command to be a minimal command that just does server side
picking of commits, displaying the results on stdout for higher level
scripts to consume.
So let's simplify it:
* remove the worktree and index reading/writing,
* remove the ref (and reflog) updating,
* remove the assumptions tying us to HEAD, since (a) this is not a
rebase and (b) we want to be able to pick commits in a bare repo,
i.e. to/from branches that are not checked out and not the main
branch,
* remove unneeded includes,
* handle rebasing multiple branches by printing on stdout the update
ref commands that should be performed.
The output can be piped into `git update-ref --stdin` for the ref
updates to happen.
In the future to make it easier for users to use this command
directly maybe an option can be added to automatically pipe its output
into `git update-ref`.
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We want replay to be a command that can be used on the server side on
any branch, not just the current one, so we are going to stop updating
HEAD in a future commit.
A "sanity check" that makes sure we are replaying the current branch
doesn't make sense anymore. Let's remove it.
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The replay command will be changed in a follow up commit, so that it
will not update refs directly, but instead it will print on stdout a
list of commands that can be consumed by `git update-ref --stdin`.
We don't want this output to be polluted by its current low value
output, so let's just remove the latter.
In the future, when the command gets an option to update refs by
itself, it will make a lot of sense to display a progress meter, but
we are not there yet.
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We want to be able to handle signed commits in some way in the future,
but we are not ready to do it now. So for the time being let's just add
a FIXME comment to remind us about it.
These are different ways we could handle them:
- in case of a cli user and if there was an interactive mode, we could
perhaps ask if the user wants to sign again
- we could add an option to just fail if there are signed commits
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Let's force the rev walking options we need after calling
setup_revisions() instead of before.
This might override some user supplied rev walking command line options
though. So let's detect that and warn users by:
a) setting the desired values, before setup_revisions(),
b) checking after setup_revisions() whether these values differ from
the desired values,
c) if so throwing a warning and setting the desired values again.
We want the command to work from older commits to newer ones by default.
Also we don't want history simplification, as we want to deal with all
the commits in the affected range.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Let's refactor the code to handle a regular commit (a commit that is
neither a root commit nor a merge commit) into a single function instead
of keeping it inside cmd_replay().
This is good for separation of concerns, and this will help further work
in the future to replay merge commits.
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's not a good idea for regular Git commands to use an assert() to
check for things that could happen but are not supported.
Let's die() with an explanation of the issue instead.
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of manually parsing arguments, let's start using the parse_options
API. This way this new builtin will look more standard, and in some
upcoming commits will more easily be able to handle more command line
options.
Note that we plan to later use standard revision ranges instead of
hardcoded "<oldbase> <branch>" arguments. When we will use standard
revision ranges, it will be easier to check if there are no spurious
arguments if we keep ARGV[0], so let's call parse_options() with
PARSE_OPT_KEEP_ARGV0 even if we don't need ARGV[0] right now to avoid
some useless code churn.
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For now, this is just a rename from `t/helper/test-fast-rebase.c` into
`builtin/replay.c` with minimal changes to make it build appropriately.
Let's add a stub documentation and a stub test script though.
Subsequent commits will flesh out the capabilities of the new command
and make it a more standard regular builtin.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Co-authored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation for reflog states that the --dry-run option of the
expire and delete subcommands has a corresponding short name, -n.
However, 33d7bdd645 (builtin/reflog.c: use parse-options api for expire,
delete subcommands, 2022-01-06) did not include this short name in the
new options parsing.
Re-add the short name in the new dry-run option definitions.
Signed-off-by: Josh Brobst <josh@brob.st>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"orphan branch" is not even grammatical ("orphaned branch" is), and
we have been using "unborn branch" to mean the state where the HEAD
points at a branch that does not yet exist.
Update end-user facing messages to correct them. There are cases
other random words are used (e.g., "unparented branch") but now we
have a glossary entry, use the term "unborn branch" consistently.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is a bit dense logic to make a call to "die_if_checked_out()"
while trying to check out a branch. Extract it into a helper
function and give it a bit of comment to describe what is going on.
The most important part of the refactoring is the separation of the
guarding logic before making the call to die_if_checked_out() into
the caller specific part (e.g., the logic that decides that the
caller is trying to check out an existing branch) and the bypass due
to the "--ignore-other-worktrees" option. The latter will be common
no matter how the current or future callers decides they need this
protection.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make it possible to use other diff algorithms than the 'myers'
default algorithm, when using the 'git merge-file' command, to help
avoid spurious conflicts by selecting a more recent algorithm such
as 'histogram', for instance when using 'git merge-file' as part of
a custom merge driver.
Signed-off-by: Antonin Delpeuch <antonin@delpeuch.eu>
Reviewed-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add two new public methods to 'ref-filter.h':
* 'print_formatted_ref_array()' which, given a format specification & array
of ref items, formats and prints the items to stdout.
* 'filter_and_format_refs()' which combines 'filter_refs()',
'ref_array_sort()', and 'print_formatted_ref_array()' into a single
function.
This consolidates much of the code used to filter and format refs in
'builtin/for-each-ref.c', 'builtin/tag.c', and 'builtin/branch.c', reducing
duplication and simplifying the future changes needed to optimize the filter
& format process.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add an internal 'array_opts' struct to 'struct ref_format' containing
formatting options that pertain to the formatting of an entire ref array:
'max_count' and 'omit_empty'. These values are specified by the '--count'
and '--omit-empty' options, respectively, to 'for-each-ref'/'tag'/'branch'.
Storing these values in the 'ref_format' will simplify the consolidation of
ref array formatting logic across builtins in later patches.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When '--no-sort' is passed to 'for-each-ref', 'tag', and 'branch', the
printed refs are still sorted by ascending refname. Change the handling of
sort options in these commands so that '--no-sort' to truly disables
sorting.
'--no-sort' does not disable sorting in these commands is because their
option parsing does not distinguish between "the absence of '--sort'"
(and/or values for tag.sort & branch.sort) and '--no-sort'. Both result in
an empty 'sorting_options' string list, which is parsed by
'ref_sorting_options()' to create the 'struct ref_sorting *' for the
command. If the string list is empty, 'ref_sorting_options()' interprets
that as "the absence of '--sort'" and returns the default ref sorting
structure (equivalent to "refname" sort).
To handle '--no-sort' properly while preserving the "refname" sort in the
"absence of --sort'" case, first explicitly add "refname" to the string list
*before* parsing options. This alone doesn't actually change any behavior,
since 'compare_refs()' already falls back on comparing refnames if two refs
are equal w.r.t all other sort keys.
Now that the string list is populated by default, '--no-sort' is the only
way to empty the 'sorting_options' string list. Update
'ref_sorting_options()' to return a NULL 'struct ref_sorting *' if the
string list is empty, and add a condition to 'ref_array_sort()' to skip the
sort altogether if the sort structure is NULL. Note that other functions
using 'struct ref_sorting *' do not need any changes because they already
ignore NULL values.
Finally, remove the condition around sorting in 'ls-remote', since it's no
longer necessary. Unlike 'for-each-ref' et. al., it does *not* do any
sorting by default. This default is preserved by simply leaving its sort key
string list empty before parsing options; if no additional sort keys are
set, 'struct ref_sorting *' is NULL and sorting is skipped.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The rebase --autosquash option is quietly ignored when used without
--interactive (apart from preventing preemptive fast-forwarding and
triggering conflicts with apply backend options).
Change that to support --autosquash without --interactive, by dropping
its restriction to REBASE_INTERACTIVE_EXCPLICIT mode. When used this
way, auto-squashing is done without opening the todo list editor.
Drop the -i requirement from the --autosquash description, and amend
t3415-rebase-autosquash.sh to test the option and the rebase.autoSquash
config variable with and without -i.
Signed-off-by: Andy Koppe <andy.koppe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
