Age | Commit message (Collapse) | Author |
|
* jc/spht:
Use gitattributes to define per-path whitespace rule
core.whitespace: documentation updates.
builtin-apply: teach whitespace_rules
builtin-apply: rename "whitespace" variables and fix styles
core.whitespace: add test for diff whitespace error highlighting
git-diff: complain about >=8 consecutive spaces in initial indent
War on whitespace: first, a bit of retreat.
Conflicts:
cache.h
config.c
diff.c
|
|
* maint:
config.c:store_write_pair(): don't read the byte before a malloc'd buffer.
|
|
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `core.whitespace` configuration variable allows you to define what
`diff` and `apply` should consider whitespace errors for all paths in
the project (See gitlink:git-config[1]). This attribute gives you finer
control per path.
For example, if you have these in the .gitattributes:
frotz whitespace
nitfol -whitespace
xyzzy whitespace=-trailing
all types of whitespace problems known to git are noticed in path 'frotz'
(i.e. diff shows them in diff.whitespace color, and apply warns about
them), no whitespace problem is noticed in path 'nitfol', and the
default types of whitespace problems except "trailing whitespace" are
noticed for path 'xyzzy'. A project with mixed Python and C might want
to have:
*.c whitespace
*.py whitespace=-indent-with-non-tab
in its toplevel .gitattributes file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are inconsistencies in the way commands currently handle
the core.excludesfile configuration variable. The problem is
the variable is too new to be noticed by anything other than
git-add and git-status.
* git-ls-files does not notice any of the "ignore" files by
default, as it predates the standardized set of ignore files.
The calling scripts established the convention to use
.git/info/exclude, .gitignore, and later core.excludesfile.
* git-add and git-status know about it because they call
add_excludes_from_file() directly with their own notion of
which standard set of ignore files to use. This is just a
stupid duplication of code that need to be updated every time
the definition of the standard set of ignore files is
changed.
* git-read-tree takes --exclude-per-directory=<gitignore>,
not because the flexibility was needed. Again, this was
because the option predates the standardization of the ignore
files.
* git-merge-recursive uses hardcoded per-directory .gitignore
and nothing else. git-clean (scripted version) does not
honor core.* because its call to underlying ls-files does not
know about it. git-clean in C (parked in 'pu') doesn't either.
We probably could change git-ls-files to use the standard set
when no excludes are specified on the command line and ignore
processing was asked, or something like that, but that will be a
change in semantics and might break people's scripts in a subtle
way. I am somewhat reluctant to make such a change.
On the other hand, I think it makes perfect sense to fix
git-read-tree, git-merge-recursive and git-clean to follow the
same rule as other commands. I do not think of a valid use case
to give an exclude-per-directory that is nonstandard to
read-tree command, outside a "negative" test in the t1004 test
script.
This patch is the first step to untangle this mess.
The next step would be to teach read-tree, merge-recursive and
clean (in C) to use setup_standard_excludes().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If ETC_GITCONFIG is not an absolute path, interpret it relative to
--exec-dir. This makes the installed binaries relocatable because the
prefix is not compiled-in.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a subsequent patch the path to the system-wide config file will be
computed. This is a preparation for that change. It turns all accesses
of ETC_GITCONFIG into function calls. There is no change in behavior.
As a consequence, config.c is the only file that needs the definition of
ETC_GITCONFIG. Hence, -DETC_GITCONFIG is removed from the CFLAGS and a
special build rule for config.c is introduced. As a side-effect, changing
the defintion of ETC_GITCONFIG (e.g. in config.mak) does not trigger a
complete rebuild anymore.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are inconsistencies in the way commands currently handle
the core.excludesfile configuration variable. The problem is
the variable is too new to be noticed by anything other than
git-add and git-status.
* git-ls-files does not notice any of the "ignore" files by
default, as it predates the standardized set of ignore files.
The calling scripts established the convention to use
.git/info/exclude, .gitignore, and later core.excludesfile.
* git-add and git-status know about it because they call
add_excludes_from_file() directly with their own notion of
which standard set of ignore files to use. This is just a
stupid duplication of code that need to be updated every time
the definition of the standard set of ignore files is
changed.
* git-read-tree takes --exclude-per-directory=<gitignore>,
not because the flexibility was needed. Again, this was
because the option predates the standardization of the ignore
files.
* git-merge-recursive uses hardcoded per-directory .gitignore
and nothing else. git-clean (scripted version) does not
honor core.* because its call to underlying ls-files does not
know about it. git-clean in C (parked in 'pu') doesn't either.
We probably could change git-ls-files to use the standard set
when no excludes are specified on the command line and ignore
processing was asked, or something like that, but that will be a
change in semantics and might break people's scripts in a subtle
way. I am somewhat reluctant to make such a change.
On the other hand, I think it makes perfect sense to fix
git-read-tree, git-merge-recursive and git-clean to follow the
same rule as other commands. I do not think of a valid use case
to give an exclude-per-directory that is nonstandard to
read-tree command, outside a "negative" test in the t1004 test
script.
This patch is the first step to untangle this mess.
The next step would be to teach read-tree, merge-recursive and
clean (in C) to use setup_standard_excludes().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This introduces a new whitespace error type, "indent-with-non-tab".
The error is about starting a line with 8 or more SP, instead of
indenting it with a HT.
This is not enabled by default, as some projects employ an
indenting policy to use only SPs and no HTs.
The kernel folks and git contributors may want to enable this
detection with:
[core]
whitespace = indent-with-non-tab
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This introduces core.whitespace configuration variable that lets
you specify the definition of "whitespace error".
Currently there are two kinds of whitespace errors defined:
* trailing-space: trailing whitespaces at the end of the line.
* space-before-tab: a SP appears immediately before HT in the
indent part of the line.
You can specify the desired types of errors to be detected by
listing their names (unique abbreviations are accepted)
separated by comma. By default, these two errors are always
detected, as that is the traditional behaviour. You can disable
detection of a particular type of error by prefixing a '-' in
front of the name of the error, like this:
[core]
whitespace = -trailing-space
This patch teaches the code to output colored diff with
DIFF_WHITESPACE color to highlight the detected whitespace
errors to honor the new configuration.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cr/tag:
Teach "git stripspace" the --strip-comments option
Make verify-tag a builtin.
builtin-tag.c: Fix two memory leaks and minor notation changes.
launch_editor(): Heed GIT_EDITOR and core.editor settings
Make git tag a builtin.
|
|
Changed git_commit_set_multivar() to use the routines provided by
lockfile.c to reduce code duplication and ensure consistent behavior.
Signed-off-by: Bradford C. Smith <bradford.carl.smith@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the commit 'Add GIT_EDITOR environment and core.editor
configuration variables', this was done for the shell scripts.
Port it over to builtin-tag's version of launch_editor(), which
is just about to be refactored into editor.c.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Split out the nnn{k,m,g} parsing code from git_config_int into
git_parse_long, so command-line parameters can enjoy the same
functionality. Also add get_parse_ulong for unsigned values.
Make git_config_int use git_parse_long, and add get_config_ulong
as well.
Signed-off-by: Brian Downing <bdowning@lavos.net>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This adds a configuration variable that performs the same function as,
but is overridden by, GIT_PAGER.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Acked-by: Johannes E. Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We always quote "unusual" byte values in a pathname using
C-string style, to make it safer for parsing scripts that do not
handle NUL separated records well (or just too lazy to bother).
The absolute minimum bytes that need to be quoted for this
purpose are TAB, LF (and other control characters), double quote
and backslash.
However, we have also always quoted the bytes in high 8-bit
range; this was partly because we were lazy and partly because
we were being cautious.
This introduces an internal "quote_path_fully" variable, and
core.quotepath configuration variable to control it. When set
to false, it does not quote bytes in high 8-bit range anymore
but passes them intact.
The variable defaults to "true" to retain the traditional
behaviour for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* dh/pack:
Custom compression levels for objects and packs
|
|
* np/pack:
deprecate the new loose object header format
make "repack -f" imply "pack-objects --no-reuse-object"
allow for undeltified objects not to be reused
|
|
Earlier code tried to be half-careful and knew the logic that
seeing "a.var" after seeing "a.b.var" is a sign of the previous
"a.b." section has ended, but forgot it has to handle the other
way. Seeing "a.b.var" after seeing "a.var" is a sign that "a."
section has ended, so a new "a.var2" variable should be added
before the location "a.b.var" appears.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Add config variables pack.compression and core.loosecompression ,
and switch --compression=level to pack-objects.
Loose objects will be compressed using core.loosecompression if set,
else core.compression if set, else Z_BEST_SPEED.
Packed objects will be compressed using --compression=level if seen,
else pack.compression if set, else core.compression if set,
else Z_DEFAULT_COMPRESSION. This is the "pack compression level".
Loose objects added to a pack undeltified will be recompressed
to the pack compression level if it is unequal to the current
loose compression level by the preceding rules, or if the loose
object was written while core.legacyheaders = true. Newly
deltified loose objects are always compressed to the current
pack compression level.
Previously packed objects added to a pack are recompressed
to the current pack compression level exactly when their
deltification status changes, since the previous pack data
cannot be reused.
In either case, the --no-reuse-object switch from the first
patch below will always force recompression to the current pack
compression level, instead of assuming the pack compression level
hasn't changed and pack data can be reused when possible.
This applies on top of the following patches from Nicolas Pitre:
[PATCH] allow for undeltified objects not to be reused
[PATCH] make "repack -f" imply "pack-objects --no-reuse-object"
Signed-off-by: Dana L. How <danahow@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Now that we encourage and actively preserve objects in a packed form
more agressively than we did at the time the new loose object format and
core.legacyheaders were introduced, that extra loose object format
doesn't appear to be worth it anymore.
Because the packing of loose objects has to go through the delta match
loop anyway, and since most of them should end up being deltified in
most cases, there is really little advantage to have this parallel loose
object format as the CPU savings it might provide is rather lost in the
noise in the end.
This patch gets rid of core.legacyheaders, preserve the legacy format as
the only writable loose object format and deprecate the other one to
keep things simpler.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Make git_config_rename_section return success if no config file
exists. Otherwise, renaming a branch would abort, leaving the
repository in an inconsistent state.
[jc: test]
Signed-off-by: Geert Bosch <bosch@gnat.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The new configuration variable core.deltaBaseCacheLimit allows the
user to control how much memory they are willing to give to Git for
caching base objects of deltas. This is not normally meant to be
a user tweakable knob; the "out of the box" settings are meant to
be suitable for almost all workloads.
We default to 16 MiB under the assumption that the cache is not
meant to consume all of the user's available memory, and that the
cache's main purpose was to cache trees, for faster path limiters
during revision traversal. Since trees tend to be relatively small
objects, this relatively small limit should still allow a large
number of objects.
On the other hand we don't want the cache to start storing 200
different versions of a 200 MiB blob, as this could easily blow
the entire address space of a 32 bit process.
We evict OBJ_BLOB from the cache first (credit goes to Junio) as
we want to favor OBJ_TREE within the cache. These are the objects
that have the highest inflate() startup penalty, as they tend to
be small and thus don't have that much of a chance to ammortize
that penalty over the entire data.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We generally prefer xstrdup to just plain strdup.
Make it so.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* js/config-rename:
git-config: document --rename-section, provide --remove-section
|
|
Some systems have sizeof(off_t) == 8 while sizeof(size_t) == 4.
This implies that we are able to access and work on files whose
maximum length is around 2^63-1 bytes, but we can only malloc or
mmap somewhat less than 2^32-1 bytes of memory.
On such a system an implicit conversion of off_t to size_t can cause
the size_t to wrap, resulting in unexpected and exciting behavior.
Right now we are working around all gcc warnings generated by the
-Wshorten-64-to-32 option by passing the off_t through xsize_t().
In the future we should make xsize_t on such problematic platforms
detect the wrapping and die if such a file is accessed.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This patch documents the previously undocumented option --rename-section
and adds a new option to zap an entire section.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Some file systems that can host git repositories and their working copies
do not support symbolic links. But then if the repository contains a symbolic
link, it is impossible to check out the working copy.
This patch enables partial support of symbolic links so that it is possible
to check out a working copy on such a file system. A new flag
core.symlinks (which is true by default) can be set to false to indicate
that the filesystem does not support symbolic links. In this case, symbolic
links that exist in the trees are checked out as small plain files, and
checking in modifications of these files preserve the symlink property in
the database (as long as an entry exists in the index).
Of course, this does not magically make symbolic links work on such defective
file systems; hence, this solution does not help if the working copy relies
on that an entry is a real symbolic link.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* js/etc-config:
Make tests independent of global config files
config: read system-wide defaults from /etc/gitconfig
|
|
* lt/crlf:
Teach core.autocrlf to 'git apply'
t0020: add test for auto-crlf
Make AutoCRLF ternary variable.
Lazy man's auto-CRLF
* jc/apply-config:
t4119: test autocomputing -p<n> for traditional diff input.
git-apply: guess correct -p<n> value for non-git patches.
git-apply: notice "diff --git" patch again
Fix botched "leak fix"
t4119: add test for traditional patch and different p_value
apply: fix memory leak in prefix_one()
git-apply: require -p<n> when working in a subdirectory.
git-apply: do not lose cwd when run from a subdirectory.
Teach 'git apply' to look at $HOME/.gitconfig even outside of a repository
Teach 'git apply' to look at $GIT_DIR/config
|
|
The settings in /etc/gitconfig can be overridden in ~/.gitconfig,
which in turn can be overridden in .git/config.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The next patch depends on this.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This allows you to do:
[core]
AutoCRLF = input
and it should do only the CRLF->LF translation (ie it simplifies CRLF only
when reading working tree files, but when checking out files, it leaves
the LF alone, and doesn't turn it into a CRLF).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
It currently does NOT know about file attributes, so it does its
conversion purely based on content. Maybe that is more in the "git
philosophy" anyway, since content is king, but I think we should try to do
the file attributes to turn it off on demand.
Anyway, BY DEFAULT it is off regardless, because it requires a
[core]
AutoCRLF = true
in your config file to be enabled. We could make that the default for
Windows, of course, the same way we do some other things (filemode etc).
But you can actually enable it on UNIX, and it will cause:
- "git update-index" will write blobs without CRLF
- "git diff" will diff working tree files without CRLF
- "git checkout" will write files to the working tree _with_ CRLF
and things work fine.
Funnily, it actually shows an odd file in git itself:
git clone -n git test-crlf
cd test-crlf
git config core.autocrlf true
git checkout
git diff
shows a diff for "Documentation/docbook-xsl.css". Why? Because we have
actually checked in that file *with* CRLF! So when "core.autocrlf" is
true, we'll always generate a *different* hash for it in the index,
because the index hash will be for the content _without_ CRLF.
Is this complete? I dunno. It seems to work for me. It doesn't use the
filename at all right now, and that's probably a deficiency (we could
certainly make the "is_binary()" heuristics also take standard filename
heuristics into account).
I don't pass in the filename at all for the "index_fd()" case
(git-update-index), so that would need to be passed around, but this
actually works fine.
NOTE NOTE NOTE! The "is_binary()" heuristics are totally made-up by yours
truly. I will not guarantee that they work at all reasonable. Caveat
emptor. But it _is_ simple, and it _is_ safe, since it's all off by
default.
The patch is pretty simple - the biggest part is the new "convert.c" file,
but even that is really just basic stuff that anybody can write in
"Teaching C 101" as a final project for their first class in programming.
Not to say that it's bug-free, of course - but at least we're not talking
about rocket surgery here.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The "git-config --rename-section" implementation would match sections
that are substrings of the section name to be renamed.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This will no longer work:
$ git repo-config 'key.with
newline' some-value
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
|
|
* jc/bare:
Disallow working directory commands in a bare repository.
git-fetch: allow updating the current branch in a bare repository.
Introduce is_bare_repository() and core.bare configuration variable
Move initialization of log_all_ref_updates
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Suggested by Jakub Narebski <jnareb@gmail.com> on the list.
When we send a value to store_write_pair(), make sure that the value
that gets read out matches the one passed in. This means that for any
value that contains leading or trailing whitespace or any comment
character (# and ;), we need to surround it in quotes.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We need to check that the writes we perform during the update of
the users configuration work. Convert to using write_in_full().
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This removes the old is_bare_git_dir(const char *) to ask if a
directory, if it is a GIT_DIR, is a bare repository, and
replaces it with is_bare_repository(void *). The function looks
at core.bare configuration variable if exists but uses the old
heuristics: if it is ".git" or ends with "/.git", then it does
not look like a bare repository, otherwise it does.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* master:
Documentation/config.txt (and repo-config manpage): mark-up fix.
Teach Git how to parse standard power of 2 suffixes.
Use /dev/null for update hook stdin.
Redirect update hook stdout to stderr.
Remove unnecessary argc parameter from run_command_v.
Automatically detect a bare git repository.
Replace "GIT_DIR" with GIT_DIR_ENVIRONMENT.
Use PATH_MAX constant for --bare.
Force core.filemode to false on Cygwin.
Fix formatting for urls section of fetch, pull, and push manpages
Fix yet another subtle xdl_merge() bug
i18n: drop "encoding" header in the output after re-coding.
commit-tree: cope with different ways "utf-8" can be spelled.
Move commit reencoding parameter parsing to revision.c
Documentation: minor rewording for git-log and git-show pages.
Documentation: i18n commit log message notes.
t3900: test log --encoding=none
commit re-encoding: fix confusion between no and default conversion.
|
|
Sometimes its necessary to supply a value as a power of two in a
configuration parameter. In this case the user may want to use the
standard suffixes such as K, M, or G to indicate that the numerical
value should be multiplied by a constant base before being used.
Shell scripts/etc. can also benefit from this automatic option
parsing with `git repo-config --int`.
[jc: with a couple of test and a slight input tightening]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
In some cases we did not even bother to check the return value of
mmap() and just assume it worked. This is bad, because if we are
out of virtual address space the kernel returned MAP_FAILED and we
would attempt to dereference that address, segfaulting without any
real error output to the user.
We are replacing all calls to mmap() with xmmap() and moving all
MAP_FAILED checking into that single location. If a mmap call
fails we try to release enough least-recently-used pack windows
to possibly succeed, then retry the mmap() attempt. If we cannot
mmap even after releasing pack memory then we die() as none of our
callers have any reasonable recovery strategy for a failed mmap.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We cannot allow a window to be smaller than 2 system pages.
This limitation is necessary to support the feature of use_pack()
where we always supply at least 20 bytes after the offset to help
the object header and delta base parsing routines.
If packedGitWindowSize were allowed to be as small as 1 system page
then we would be completely unable to access an object header which
spanned over a page as we would never be able to arrange a mapping
such that the header was contiguous in virtual memory.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This finally turns on the sliding window behavior for packfile data
access by mapping limited size windows and chaining them under the
packed_git->windows list.
We consider a given byte offset to be within the window only if there
would be at least 20 bytes (one hash worth of data) accessible after
the requested offset. This range selection relates to the contract
that use_pack() makes with its callers, allowing them to access
one hash or one object header without needing to call use_pack()
for every byte of data obtained.
In the worst case scenario we will map the same page of data twice
into memory: once at the end of one window and once again at the
start of the next window. This duplicate page mapping will happen
only when an object header or a delta base reference is spanned
over the end of a window and is always limited to just one page of
duplication, as no sane operating system will ever have a page size
smaller than a hash.
I am assuming that the possible wasted page of virtual address
space is going to perform faster than the alternatives, which
would be to copy the object header or ref delta into a temporary
buffer prior to parsing, or to check the window range on every byte
during header parsing. We may decide to revisit this decision in
the future since this is just a gut instinct decision and has not
actually been proven out by experimental testing.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Rather than hardcoding the maximum number of bytes which can be
mmapped from pack files we should make this value configurable,
allowing the end user to increase or decrease this limit on a
per-repository basis depending on the size of the repository
and the capabilities of their operating system.
In general users should not need to manually tune such a low-level
setting within the core code, but being able to artifically limit
the number of bytes which we can mmap at once from pack files will
make it easier to craft test cases for the new mmap sliding window
implementation.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
It is plausible for somebody to want to view the commit log in a
different encoding from i18n.commitencoding -- the project's
policy may be UTF-8 and the user may be using a commit message
hook to run iconv to conform to that policy (and either not have
i18n.commitencoding to default to UTF-8 or have it explicitly
set to UTF-8). Even then, Latin-1 may be more convenient for
the usual pager and the terminal the user uses.
The new variable i18n.logoutputencoding is used in preference to
i18n.commitencoding to decide what encoding to recode the log
output in when git-log and friends formats the commit log message.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|