Age | Commit message (Collapse) | Author |
|
The ort merge backend has been optimized by skipping irrelevant
renames.
* en/ort-perf-batch-9:
diffcore-rename: avoid doing basename comparisons for irrelevant sources
merge-ort: skip rename detection entirely if possible
merge-ort: use relevant_sources to filter possible rename sources
merge-ort: precompute whether directory rename detection is needed
merge-ort: introduce wrappers for alternate tree traversal
merge-ort: add data structures for an alternate tree traversal
merge-ort: precompute subset of sources for which we need rename detection
diffcore-rename: enable filtering possible rename sources
|
|
Rename detection rework continues.
* en/ort-perf-batch-8:
diffcore-rename: compute dir_rename_guess from dir_rename_counts
diffcore-rename: limit dir_rename_counts computation to relevant dirs
diffcore-rename: compute dir_rename_counts in stages
diffcore-rename: extend cleanup_dir_rename_info()
diffcore-rename: move dir_rename_counts into dir_rename_info struct
diffcore-rename: add function for clearing dir_rename_count
Move computation of dir_rename_count from merge-ort to diffcore-rename
diffcore-rename: add a mapping of destination names to their indices
diffcore-rename: provide basic implementation of idx_possible_rename()
diffcore-rename: use directory rename guided basename comparisons
|
|
Add the ability to diffcore_rename_extended() to allow external callers
to declare that they only need renames detected for a subset of source
files, and use that information to skip detecting renames for them.
There are two important pieces to this optimization that may not be
obvious at first glance:
* We do not require callers to just filter the filepairs out
to remove the non-relevant sources, because exact rename detection
is fast and when it finds a match it can remove both a source and a
destination whereas the relevant_sources filter can only remove a
source.
* We need to filter out the source pairs in a preliminary pass instead
of adding a
strset_contains(relevant_sources, one->path)
check within the nested matrix loop. The reason for that is if we
have 30k renames, doing 30k * 30k = 900M strset_contains() calls
becomes extraordinarily expensive and defeats the performance gains
from this change; we only want to do 30k such calls instead.
If callers pass NULL for relevant_sources, that is special cases to
treat all sources as relevant. Since all callers currently pass NULL,
this optimization does not yet have any effect. Subsequent commits will
have merge-ort compute a set of relevant_sources to restrict which
sources we detect renames for, and have merge-ort pass that set of
relevant_sources to diffcore_rename_extended().
A note about filtering order:
Some may be curious why we don't filter out irrelevant sources at the
same time we filter out exact renames. While that technically could be
done at this point, there are two reasons to defer it:
First, was to reinforce a lesson that was too easy to forget. As I
mentioned above, in the past I filtered irrelevant sources out before
exact rename checking, and then discovered that exact renames' ability
to remove both sources and destinations was an important consideration
and thus doing the filtering after exact rename checking would speed
things up. Then at some point I realized that basename matching could
also remove both sources and destinations, and decided to put irrelevant
source filtering after basename filtering. That slowed things down a
lot. But, despite learning about this important ordering, in later
restructuring I forgot and made the same mistake of putting the
filtering after basename guided rename detection again. So, I have this
series of patches structured to do the irrelevant filtering last to
start to show how much extra it costs, and then add relevant filtering
in to find_basename_matches() to show how much it speeds things up.
Basically, it's a way to reinforce something that apparently was too
easy to forget, and make sure the commit messages record this lesson.
Second, the items in the "relevant_sources" in this patch series will
include all sources that *might be* relevant. It has to be conservative
and catch anything that might need a rename, but in the patch series
after this one we'll find ways to weed out more of the *might be*
relevant ones. Unfortunately, merge-ort does not have sufficient
information to weed those ones out, and there isn't enough information
at the time of filtering exact renames out to remove the extra ones
either. It has to be deferred. So the deferral is in part to simplify
some later additions.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As we adjust the usage of dir_rename_count we want to have a function
for clearing, or partially clearing it out. Add a
partial_clear_dir_rename_count() function for this purpose.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the computation of dir_rename_count from merge-ort.c to
diffcore-rename.c, making slight adjustments to the data structures
based on the move. While the diffstat looks large, viewing this commit
with --color-moved makes it clear that only about 20 lines changed.
With this patch, the computation of dir_rename_count is still only done
after inexact rename detection, but subsequent commits will add a
preliminary computation of dir_rename_count after exact rename
detection, followed by some updates after inexact rename detection.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the implementation of "git difftool", there is a case where the
user wants to start viewing the diffs at a specific path and
continue on to the rest, optionally wrapping around to the
beginning. Since it is somewhat cumbersome to implement such a
feature as a post-processing step of "git diff" output, let's
support it internally with two new options.
- "git diff --rotate-to=C", when the resulting patch would show
paths A B C D E without the option, would "rotate" the paths to
shows patch to C D E A B instead. It is an error when there is
no patch for C is shown.
- "git diff --skip-to=C" would instead "skip" the paths before C,
and shows patch to C D E. Again, it is an error when there is no
patch for C is shown.
- "git log [-p]" also accepts these two options, but it is not an
error if there is no change to the specified path. Instead, the
set of output paths are rotated or skipped to the specified path
or the first path that sorts after the specified path.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 7fbbcb21b1 ("diff: batch fetching of missing blobs", 2019-04-08)
optimized "diff" by prefetching blobs in a partial clone, but there are
some cases wherein blobs do not need to be prefetched. In these cases,
any command that uses the diff machinery will unnecessarily fetch blobs.
diffcore_std() may read blobs when it calls the following functions:
(1) diffcore_skip_stat_unmatch() (controlled by the config variable
diff.autorefreshindex)
(2) diffcore_break() and diffcore_merge_broken() (for break-rewrite
detection)
(3) diffcore_rename() (for rename detection)
(4) diffcore_pickaxe() (for detecting addition/deletion of specified
string)
Instead of always prefetching blobs, teach diffcore_skip_stat_unmatch(),
diffcore_break(), and diffcore_rename() to prefetch blobs upon the first
read of a missing object. This covers (1), (2), and (3): to cover the
rest, teach diffcore_std() to prefetch if the output type is one that
includes blob data (and hence blob data will be required later anyway),
or if it knows that (4) will be run.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The behavior of diff_populate_filespec() currently can be customized
through a bitflag, but a subsequent patch requires it to support a
non-boolean option. Replace the bitflag with an options struct.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the documentation from Documentation/technical/api-diff.txt to both
diff.h and diffcore.h as it's easier for the developers to find the usage
information beside the code instead of looking for it in another doc file.
Also documentation/technical/api-diff.txt is removed because the information
it has is now redundant and it'll be hard to keep it up to date and
synchronized with the documentation in the header files.
There are three members documented in the doc file that weren't found in
the header files, assuming the doc wasn't up to date and the members
no longer exist:
touched_flags, COLOR_DIFF_WORDS and QUIET.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
diff and textconv code has so widespread use that it's hard to simply
update their api and all call sites at once because it would result in
a big patch. For now reduce the_index references to two places:
diff_setup() and fill_textconv().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code hygiene improvement for the header files.
* en/incl-forward-decl:
Remove forward declaration of an enum
compat/precompose_utf8.h: use more common include guard style
urlmatch.h: fix include guard
Move definition of enum branch_track from cache.h to branch.h
alloc: make allocate_alloc_state and clear_alloc_state more consistent
Add missing includes and forward declarations
|
|
I looped over the toplevel header files, creating a temporary two-line C
program for each consisting of
#include "git-compat-util.h"
#include $HEADER
This patch is the result of manually fixing errors in compiling those
tiny programs.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* tk/diffcore-delta-remove-unused:
diffcore-delta: remove unused parameter to diffcore_count_changes()
|
|
The delta_limit parameter to diffcore_count_changes() has been unused
since commit ba23bbc8e ("diffcore-delta: make change counter to byte
oriented again.", 2006-03-04).
Remove the parameter and adjust all callers.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that this struct's sha1 member is called "oid", update the comment
and the sha1_valid member to be called "oid_valid" instead. The
following Coccinelle semantic patch was used to implement this, followed
by the transformations in object_id.cocci:
@@
struct diff_filespec o;
@@
- o.sha1_valid
+ o.oid_valid
@@
struct diff_filespec *p;
@@
- p->sha1_valid
+ p->oid_valid
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert struct diff_filespec's sha1 member to use a struct object_id
called "oid" instead. The following Coccinelle semantic patch was used
to implement this, followed by the transformations in object_id.cocci:
@@
struct diff_filespec o;
@@
- o.sha1
+ o.oid.hash
@@
struct diff_filespec *p;
@@
- p->sha1
+ p->oid.hash
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Too large files may lead to failure to allocate memory. If it happens
here, it could impact quite a few commands that involve
diff. Moreover, too large files are inefficient to compare anyway (and
most likely non-text), so mark them binary and skip looking at their
content.
Noticed-by: Dale R. Worley <worley@alum.mit.edu>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Portability fix to a topic already in v1.9
* jk/diff-filespec-cleanup:
diffcore.h: be explicit about the signedness of is_binary
|
|
Teach combine-diff to honour the path-output-order imposed by
diffcore-order, and optimize how matching paths are found in
the N-way diffs made with parents.
* ks/combine-diff:
tests: add checking that combine-diff emits only correct paths
combine-diff: simplify intersect_paths() further
combine-diff: combine_diff_path.len is not needed anymore
combine-diff: optimize combine_diff_path sets intersection
diff test: add tests for combine-diff with orderfile
diffcore-order: export generic ordering interface
|
|
"git diff --quiet -- pathspec1 pathspec2" sometimes did not return
correct status value.
* nd/diff-quiet-stat-dirty:
diff: do not quit early on stat-dirty files
diff.c: move diffcore_skip_stat_unmatch core logic out for reuse later
|
|
When QUICK is set (i.e. with --quiet) we try to do as little work as
possible, stopping after seeing the first change. stat-dirty is
considered a "change" but it may turn out not, if no actual content is
changed. The actual content test is performed too late in the process
and the shortcut may be taken prematurely, leading to incorrect return
code.
Assume we do "git diff --quiet". If we have a stat-dirty file "a" and
a really dirty file "b". We break the loop in run_diff_files() and
stop after "a" because we have got a "change". Later in
diffcore_skip_stat_unmatch() we find out "a" is actually not
changed. But there's nothing else in the diff queue, we incorrectly
declare "no change", ignoring the fact that "b" is changed.
This also happens to "git diff --quiet HEAD" when it hits
diff_can_quit_early() in oneway_diff().
This patch does the content test earlier in order to keep going if "a"
is unchanged. The test result is cached so that when
diffcore_skip_stat_unmatch() is done in the end, we spend no cycles on
re-testing "a".
Reported-by: IWAMOTO Toshihiro <iwamoto@valinux.co.jp>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
diffcore_order() interface only accepts a queue of `struct
diff_filepair`.
In the next patches, we'll want to order `struct combine_diff_path`
by path, so let's first rework diffcore-order to also provide
generic low-level interface for ordering arbitrary objects, provided
they have path accessors.
The new interface is:
- `struct obj_order` for describing objects to ordering routine, and
- order_objects() for actually doing the ordering work.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Bitfields need to specify their signedness explicitly or the compiler is
free to default as it sees fit. With compilers that default 'unsigned'
(SUNWspro 12 seems to do this) the tri-state nature of is_binary
vanishes and all files are treated as binary.
Signed-off-by: Richard Lowe <richlowe@richlowe.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The is_binary flag needs only three values: -1, 0, and 1.
However, we use a whole 32-bit int for it on most systems
(both 32- and 64- bit).
Instead, we can mark it to use only 2 bits. On 32-bit
systems, this lets it end up as part of the bitfield above
(saving 4 bytes). On 64-bit systems, we don't see any change
(because the savings end up as padding), but it does leave
room for another "free" 32-bit value to be added later.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The middle of the diff_filespec struct contains a mixture of
ints, shorts, and bit-fields, followed by a pointer. On an
x86-64 system with an LP64 or LLP64 data model (i.e., most
of them), the integers and flags end up being padded out by
41 bits to put the pointer at an 8-byte boundary.
After the pointer, we have the "int is_binary" field, which
is only 32 bits. We end up wasting another 32 bits to pad
the struct size up to a multiple of 64 bits.
We can move the is_binary field before the pointer, which
lets the compiler store it where we used to have padding.
This shrinks the top padding to only 9 bits (from the
bit-fields), and eliminates the bottom padding entirely,
dropping the struct size from 88 to 80 bytes.
On a 32-bit system, there is no benefit, but nor should
there be any harm (we only need 4-byte alignment there, so
we were already using only 9 bits of padding).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The only mention of this field in the code is by some
debugging code which prints it out (and it will always be
zero, since we never touch it otherwise). It was obsoleted
very early on by 25d5ea4 ([PATCH] Redo rename/copy detection
logic., 2005-05-24).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This struct field was obsoleted by be58e70 (diff: unify
external diff and funcname parsing code, 2008-10-05), but we
forgot to remove it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
diff_filespec has a 2-bit "dirty_submodule" field and
defines two flags as macros. Originally these were right
next to each other, but a new field was accidentally added
in between in commit 4682d85. This patch puts the field and
its flags back together.
Using an enum like:
enum {
DIRTY_SUBMODULE_UNTRACKED = 1,
DIRTY_SUBMODULE_MODIFIED = 2
} dirty_submodule;
would be more obvious, but it bloats the structure. Limiting
the enum size like:
} dirty_submodule : 2;
might work, but it is not portable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We do not want a link to 0{40} object stored anywhere in our objects.
* jk/maint-null-in-trees:
fsck: detect null sha1 in tree entries
do not write null sha1s to on-disk index
diff: do not use null sha1 as a sentinel value
|
|
The diff code represents paths using the diff_filespec
struct. This struct has a sha1 to represent the sha1 of the
content at that path, as well as a sha1_valid member which
indicates whether its sha1 field is actually useful. If
sha1_valid is not true, then the filespec represents a
working tree file (e.g., for the no-index case, or for when
the index is not up-to-date).
The diff_filespec is only used internally, though. At the
interfaces to the diff subsystem, callers feed the sha1
directly, and we create a diff_filespec from it. It's at
that point that we look at the sha1 and decide whether it is
valid or not; callers may pass the null sha1 as a sentinel
value to indicate that it is not.
We should not typically see the null sha1 coming from any
other source (e.g., in the index itself, or from a tree).
However, a corrupt tree might have a null sha1, which would
cause "diff --patch" to accidentally diff the working tree
version of a file instead of treating it as a blob.
This patch extends the edges of the diff interface to accept
a "sha1_valid" flag whenever we accept a sha1, and to use
that flag when creating a filespec. In some cases, this
means passing the flag through several layers, making the
code change larger than would be desirable.
One alternative would be to simply die() upon seeing
corrupted trees with null sha1s. However, this fix more
directly addresses the problem (while bogus sha1s in a tree
are probably a bad thing, it is really the sentinel
confusion sending us down the wrong code path that is what
makes it devastating). And it means that git is more capable
of examining and debugging these corrupted trees. For
example, you can still "diff --raw" such a tree to find out
when the bogus entry was introduced; you just cannot do a
"--patch" diff (just as you could not with any other
corrupted tree, as we do not have any content to diff).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Due to the way "git diff --no-index" is bolted onto by touching the
low level code that is shared with the rest of the "git diff" code,
even though it has to work in a very different way, any comparison
that involves a file "-" at the root level incorrectly tried to read
from the standard input. This cleans up the no-index codepath
further to remove code that reads from the standard input from the
core side, which is never necessary when git is running its usual
diff operation.
* jc/refactor-diff-stdin:
diff-index.c: "git diff" has no need to read blob from the standard input
diff-index.c: unify handling of command line paths
diff-index.c: do not pretend paths are pathspecs
|
|
Only "diff --no-index -" does. Bolting the logic into the low-level
function diff_populate_filespec() was a layering violation from day
one. Move populate_from_stdin() function out of the generic diff.c
to its only user, diff-index.c.
Also make sure "-" from the command line stays a special token "read
from the standard input", even if we later decide to sanitize the
result from prefix_filename() function in a few obvious ways,
e.g. removing unnecessary "./" prefix, duplicated slashes "//" in
the middle, etc.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This teaches combine-diff machinery to feed a combined merge to a callback
function when DIFF_FORMAT_CALLBACK is specified.
So far, format callback functions are not used for anything but 2-way
diffs. A callback is given a diff_queue_struct, which is an array of
diff_filepair. As its name suggests, a diff_filepair is a _pair_ of
diff_filespec that represents a single preimage and a single postimage.
Since "diff -c" is to compare N parents with a single merge result and
filter out any paths whose result match one (or more) of the parent(s),
its output has to be able to represent N preimages and 1 postimage. For
this reason, a callback function that inspects a diff_filepair that
results from this new infrastructure can and is expected to view the
preimage side (i.e. pair->one) as an array of diff_filespec. Each element
in the array, except for the last one, is marked with "has_more_entries"
bit, so that the same callback function can be used for 2-way diffs and
combined diffs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
That would make it easier to give enhanced feature to the
pickaxe transformation.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Usually, diff frontends populate the output queue with filepairs without
any rename information and call diffcore_std() to sort the renames out.
When --follow is in effect, however, diff-tree family of frontend has a
hack that looks like this:
diff-tree frontend
-> diff_tree_sha1()
. populate diff_queued_diff
. if --follow is in effect and there is only one change that
creates the target path, then
-> try_to_follow_renames()
-> diff_tree_sha1() with no pathspec but with -C
-> diffcore_std() to find renames
. if rename is found, tweak diff_queued_diff and put a
single filepair that records the found rename there
-> diffcore_std()
. tweak elements on diff_queued_diff by
- rename detection
- path ordering
- pickaxe filtering
We need to skip parts of the second call to diffcore_std() that is related
to rename detection, and do so only when try_to_follow_renames() did find
a rename. Earlier 1da6175 (Make diffcore_std only can run once before a
diff_flush, 2010-05-06) tried to deal with this issue incorrectly; it
unconditionally disabled any second call to diffcore_std().
This hopefully fixes the breakage.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These options take an optional argument, but this optional argument was
not documented.
Original patch by Matthieu Moy, but documentation for -B mostly copied
from the explanations of Junio C Hamano.
While we're there, fix a typo in a comment in diffcore.h.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When file renames/copies detection is turned on, the
second diffcore_std will degrade a 'C' pair to a 'R' pair.
And this may happen when we run 'git log --follow' with
hard copies finding. That is, the try_to_follow_renames()
will run diffcore_std to find the copies, and then
'git log' will issue another diffcore_std, which will reduce
'src->rename_used' and recognize this copy as a rename.
This is not what we want.
So, I think we really don't need to run diffcore_std more
than one time.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor the diff_queue_struct code, this macro help
to reset the structure.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When encountering a dirty submodule while doing "git diff --submodule"
print an extra line for new untracked content and another for modified
but already tracked content. And if the HEAD of the submodule is equal
to the ref diffed against in the superproject, drop the output which
would just show the same SHA1s and no commit message headlines.
To achieve that, the dirty_submodule bitfield is expanded to two bits.
The output of "git status" inside the submodule is parsed to set the
according bits.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the worst case is_submodule_modified() got called three times for
each submodule. The information we got from scanning the whole
submodule tree the first time can be reused instead.
New parameters have been added to diff_change() and diff_addremove(),
the information is stored in a new member of struct diff_filespec. Its
value is then reused instead of calling is_submodule_modified() again.
When no explicit "-dirty" is needed in the output the call to
is_submodule_modified() is not necessary when the submodules HEAD
already disagrees with the ref of the superproject, as this alone
marks it as modified. To achieve that, get_stat_data() got an extra
argument.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Add reference for status letters in documentation.
Document that git-log takes --all-match.
Update draft 1.6.0.4 release notes
|
|
Also fix error in diff_filepair::status documentation, and point to
the in-code reference as well as the doc.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "diff" gitattribute is somewhat overloaded right now. It
can say one of three things:
1. this file is definitely binary, or definitely not
(i.e., diff or !diff)
2. this file should use an external diff engine (i.e.,
diff=foo, diff.foo.command = custom-script)
3. this file should use particular funcname patterns
(i.e., diff=foo, diff.foo.(x?)funcname = some-regex)
Most of the time, there is no conflict between these uses,
since using one implies that the other is irrelevant (e.g.,
an external diff engine will decide for itself whether the
file is binary).
However, there is at least one conflicting situation: there
is no way to say "use the regular rules to determine whether
this file is binary, but if we do diff it textually, use
this funcname pattern." That is, currently setting diff=foo
indicates that the file is definitely text.
This patch introduces a "binary" config option for a diff
driver, so that one can explicitly set diff.foo.binary. We
default this value to "don't know". That is, setting a diff
attribute to "foo" and using "diff.foo.funcname" will have
no effect on the binaryness of a file. To get the current
behavior, one can set diff.foo.binary to true.
This patch also has one additional advantage: it cleans up
the interface to the userdiff code a bit. Before, calling
code had to know more about whether attributes were false,
true, or unset to determine binaryness. Now that binaryness
is a property of a driver, we can represent these situations
just by passing back a driver struct.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
This concept was retired by 77882f6 (Retire diffcore-pathspec.,
2006-04-10), more than 2 years ago.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The core rename detection had some rather stupid code to check if a
pathname was used by a later modification or rename, which basically
walked the whole pathname space for all renames for each rename, in
order to tell whether it was a pure rename (no remaining users) or
should be considered a copy (other users of the source file remaining).
That's really silly, since we can just keep a count of users around, and
replace all those complex and expensive loops with just testing that
simple counter (but this all depends on the previous commit that shared
the diff_filespec data structure by using a separate reference count).
Note that the reference count is not the same as the rename count: they
behave otherwise rather similarly, but the reference count is tied to
the allocation (and decremented at de-allocation, so that when it turns
zero we can get rid of the memory), while the rename count is tied to
the renames and is decremented when we find a rename (so that when it
turns zero we know that it was a rename, not a copy).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rather than copy the filespecs when introducing new versions of them
(for rename or copy detection), use a refcount and increment the count
when reusing the diff_filespec.
This avoids unnecessary allocations, but the real reason behind this is
a future enhancement: we will want to track shared data across the
copy/rename detection. In order to efficiently notice when a filespec
is used by a rename, the rename machinery wants to keep track of a
rename usage count which is shared across all different users of the
filespec.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|