Age | Commit message (Collapse) | Author |
|
In this developer's earlier attempt to accelerate interactive rebases by
converting large parts from Unix shell script into portable, performant
C, the --root handling was specifically excluded (to simplify the task a
little bit; it still took over a year to get that reduced set of patches
into Git proper).
This patch ties up that loose end: now only --preserve-merges uses the
slow Unix shell script implementation to perform the interactive rebase.
As the rebase--helper reports progress to stderr (unlike the scripted
interactive rebase, which reports it to stdout, of all places), we have
to adjust a couple of tests that did not expect that for `git rebase -i
--root`.
This patch fixes -- at long last! -- the really old bug reported in
6a6bc5bdc4d (add tests for rebasing root, 2013-06-06) that rebasing with
--root *always* rewrote the root commit, even if there were no changes.
The bug still persists in --preserve-merges mode, of course, but that
mode will be deprecated as soon as the new --rebase-merges mode
stabilizes, anyway.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When running `git rebase --rebase-merges` non-interactively with an
ancestor of HEAD as <upstream> (or leaving the todo list unmodified),
we would ideally recreate the exact same commits as before the rebase.
However, if there are commits in the commit range <upstream>.. that do not
have <upstream> as direct ancestor (i.e. if `git log <upstream>..` would
show commits that are omitted by `git log --ancestry-path <upstream>..`),
this is currently not the case: we would turn them into commits that have
<upstream> as direct ancestor.
Let's illustrate that with a diagram:
C
/ \
A - B - E - F
\ /
D
Currently, after running `git rebase -i --rebase-merges B`, the new branch
structure would be (pay particular attention to the commit `D`):
--- C' --
/ \
A - B ------ E' - F'
\ /
D'
This is not really preserving the branch topology from before! The
reason is that the commit `D` does not have `B` as ancestor, and
therefore it gets rebased onto `B`.
This is unintuitive behavior. Even worse, when recreating branch
structure, most use cases would appear to want cousins *not* to be
rebased onto the new base commit. For example, Git for Windows (the
heaviest user of the Git garden shears, which served as the blueprint
for --rebase-merges) frequently merges branches from `next` early, and
these branches certainly do *not* want to be rebased. In the example
above, the desired outcome would look like this:
--- C' --
/ \
A - B ------ E' - F'
\ /
-- D' --
Let's introduce the term "cousins" for such commits ("D" in the
example), and let's not rebase them by default. For hypothetical
use cases where cousins *do* need to be rebased, `git rebase
--rebase=merges=rebase-cousins` needs to be used.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Once upon a time, this here developer thought: wouldn't it be nice if,
say, Git for Windows' patches on top of core Git could be represented as
a thicket of branches, and be rebased on top of core Git in order to
maintain a cherry-pick'able set of patch series?
The original attempt to answer this was: git rebase --preserve-merges.
However, that experiment was never intended as an interactive option,
and it only piggy-backed on git rebase --interactive because that
command's implementation looked already very, very familiar: it was
designed by the same person who designed --preserve-merges: yours truly.
Some time later, some other developer (I am looking at you, Andreas!
;-)) decided that it would be a good idea to allow --preserve-merges to
be combined with --interactive (with caveats!) and the Git maintainer
(well, the interim Git maintainer during Junio's absence, that is)
agreed, and that is when the glamor of the --preserve-merges design
started to fall apart rather quickly and unglamorously.
The reason? In --preserve-merges mode, the parents of a merge commit (or
for that matter, of *any* commit) were not stated explicitly, but were
*implied* by the commit name passed to the `pick` command.
This made it impossible, for example, to reorder commits. Not to mention
to move commits between branches or, deity forbid, to split topic branches
into two.
Alas, these shortcomings also prevented that mode (whose original
purpose was to serve Git for Windows' needs, with the additional hope
that it may be useful to others, too) from serving Git for Windows'
needs.
Five years later, when it became really untenable to have one unwieldy,
big hodge-podge patch series of partly related, partly unrelated patches
in Git for Windows that was rebased onto core Git's tags from time to
time (earning the undeserved wrath of the developer of the ill-fated
git-remote-hg series that first obsoleted Git for Windows' competing
approach, only to be abandoned without maintainer later) was really
untenable, the "Git garden shears" were born [*1*/*2*]: a script,
piggy-backing on top of the interactive rebase, that would first
determine the branch topology of the patches to be rebased, create a
pseudo todo list for further editing, transform the result into a real
todo list (making heavy use of the `exec` command to "implement" the
missing todo list commands) and finally recreate the patch series on
top of the new base commit.
That was in 2013. And it took about three weeks to come up with the
design and implement it as an out-of-tree script. Needless to say, the
implementation needed quite a few years to stabilize, all the while the
design itself proved itself sound.
With this patch, the goodness of the Git garden shears comes to `git
rebase -i` itself. Passing the `--rebase-merges` option will generate
a todo list that can be understood readily, and where it is obvious
how to reorder commits. New branches can be introduced by inserting
`label` commands and calling `merge <label>`. And once this mode will
have become stable and universally accepted, we can deprecate the design
mistake that was `--preserve-merges`.
Link *1*:
https://github.com/msysgit/msysgit/blob/master/share/msysGit/shears.sh
Link *2*:
https://github.com/git-for-windows/build-extra/blob/master/shears.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch is part of the effort to reimplement `--preserve-merges` with
a substantially improved design, a design that has been developed in the
Git for Windows project to maintain the dozens of Windows-specific patch
series on top of upstream Git.
The previous patch implemented the `label` and `reset` commands to label
commits and to reset to labeled commits. This patch adds the `merge`
command, with the following syntax:
merge [-C <commit>] <rev> # <oneline>
The <commit> parameter in this instance is the *original* merge commit,
whose author and message will be used for the merge commit that is about
to be created.
The <rev> parameter refers to the (possibly rewritten) revision to
merge. Let's see an example of a todo list (the initial `label onto`
command is an auto-generated convenience so that the label `onto` can be
used to refer to the revision onto which we rebase):
label onto
# Branch abc
reset onto
pick deadbeef Hello, world!
label abc
reset onto
pick cafecafe And now for something completely different
merge -C baaabaaa abc # Merge the branch 'abc' into master
To edit the merge commit's message (a "reword" for merges, if you will),
use `-c` (lower-case) instead of `-C`; this convention was borrowed from
`git commit` that also supports `-c` and `-C` with similar meanings.
To create *new* merges, i.e. without copying the commit message from an
existing commit, simply omit the `-C <commit>` parameter (which will
open an editor for the merge message):
merge abc
This comes in handy when splitting a branch into two or more branches.
Note: this patch only adds support for recursive merges, to keep things
simple. Support for octopus merges will be added later in a separate
patch series, support for merges using strategies other than the
recursive merge is left for the future.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the upcoming commits, we will teach the sequencer to rebase merges.
This will be done in a very different way from the unfortunate design of
`git rebase --preserve-merges` (which does not allow for reordering
commits, or changing the branch topology).
The main idea is to introduce new todo list commands, to support
labeling the current revision with a given name, resetting the current
revision to a previous state, and merging labeled revisions.
This idea was developed in Git for Windows' Git garden shears (that are
used to maintain Git for Windows' "thicket of branches" on top of
upstream Git), and this patch is part of the effort to make it available
to a wider audience, as well as to make the entire process more robust
(by implementing it in a safe and portable language rather than a Unix
shell script).
This commit implements the commands to label, and to reset to, given
revisions. The syntax is:
label <name>
reset <name>
Internally, the `label <name>` command creates the ref
`refs/rewritten/<name>`. This makes it possible to work with the labeled
revisions interactively, or in a scripted fashion (e.g. via the todo
list command `exec`).
These temporary refs are removed upon sequencer_remove_state(), so that
even a `git rebase --abort` cleans them up.
We disallow '#' as label because that character will be used as separator
in the upcoming `merge` command.
Later in this patch series, we will mark the `refs/rewritten/` refs as
worktree-local, to allow for interactive rebases to be run in parallel in
worktrees linked to the same repository.
As typos happen, a failed `label` or `reset` command will be rescheduled
immediately. As the previous code to reschedule a command is embedded
deeply in the pick/fixup/squash code path, we simply duplicate the few
lines. This will allow us to extend the new code path easily for the
upcoming `merge` command.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Up to now each command took a commit as its first argument and ignored
the rest of the line (usually the subject of the commit)
Now that we are about to introduce commands that take different
arguments, clarify each command by giving the argument list.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase" has learned to honor "--signoff" option when using
backends other than "am" (but not "--preserve-merges").
* pw/rebase-signoff:
rebase --keep-empty: always use interactive rebase
rebase -p: error out if --signoff is given
rebase: extend --signoff support
|
|
Allow --signoff to be used with --interactive and --merge. In
interactive mode only commits marked to be picked, edited or reworded
will be signed off.
The main motivation for this patch was to allow one to run 'git rebase
--exec "make check" --signoff' which is useful when preparing a patch
series for publication and is more convenient than doing the signoff
with another --exec command.
This change also allows --root without --onto to work with --signoff
as well (--root with --onto was already supported).
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
merges_option is unused in git_rebase__interactive and always empty in
git_rebase__interactive__preserve_merges so it can be removed.
Signed-off-by: Wink Saville <wink@saville.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since git_rebase__interactive__preserve_merges is now always called with
$preserve_merges = t we can remove the unused code paths.
Signed-off-by: Wink Saville <wink@saville.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since git_rebase__interactive is now never called with
$preserve_merges = t we can remove those code paths.
Signed-off-by: Wink Saville <wink@saville.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
At the moment it's an exact copy of git_rebase__interactive except
the name has changed.
Signed-off-by: Wink Saville <wink@saville.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The extracted functions are:
- initiate_action
- setup_reflog_action
- init_basic_state
- init_revisions_and_shortrevisions
- complete_action
Used by git_rebase__interactive
Signed-off-by: Wink Saville <wink@saville.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Wink Saville <wink@saville.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Due to historical reasons, the backend scriptlets for "git rebase"
are structured a bit unusually. As originally designed,
dot-sourcing them from "git rebase" was sufficient to invoke the
specific backend.
However, it was later discovered that some shell implementations
(e.g. FreeBSD 9.x) misbehaved by continuing to execute statements
following a top-level "return" rather than returning control to
the next statement in "git rebase" after dot-sourcing the
scriptlet. To work around this shortcoming, the whole body of
git-rebase--$backend.sh was made into a shell function
git_rebase__$backend, and then the very last line of the scriptlet
called that function.
A more normal architecture is for a dot-sourced scriptlet merely
to define functions (thus acting as a function library), and for
those functions to be called by the script doing the dot-sourcing.
Migrate to this arrangement by moving the git_rebase__$backend
call from the end of a scriptlet into "git rebase" itself.
While at it, remove the large comment block from each scriptlet
explaining this historic anomaly since it serves no purpose under
the new normalized architecture in which a scriptlet is merely a
function library.
Signed-off-by: Wink Saville <wink@saville.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use compound if statement instead of nested if statements to
simplify pick_on_preserving_merges.
Signed-off-by: Wink Saville <wink@saville.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The new "--show-current-patch" option gives an end-user facing way
to get the diff being applied when "git rebase" (and "git am")
stops with a conflict.
* nd/rebase-show-current-patch:
rebase: introduce and use pseudo-ref REBASE_HEAD
rebase: add --show-current-patch
am: add --show-current-patch
|
|
"git rebase -p" mangled log messages of a merge commit, which is
now fixed.
* js/fix-merge-arg-quoting-in-rebase-p:
rebase -p: fix incorrect commit message when calling `git merge`.
|
|
The new command `git rebase --show-current-patch` is useful for seeing
the commit related to the current rebase state. Some however may find
the "git show" command behind it too limiting. You may want to
increase context lines, do a diff that ignores whitespaces...
For these advanced use cases, the user can execute any command they
want with the new pseudo ref REBASE_HEAD.
This also helps show where the stopped commit is from, which is hard
to see from the previous patch which implements --show-current-patch.
Helped-by: Tim Landscheidt <tim@tim-landscheidt.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is useful to see the full patch while resolving conflicts in a
rebase. The only way to do it now is
less .git/rebase-*/patch
which could turn out to be a lot longer to type if you are in a
linked worktree, or not at top-dir. On top of that, an ordinary user
should not need to peek into .git directory. The new option is
provided to examine the patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since commit dd6fb0053 ("rebase -p: fix quoting when calling `git
merge`"), commit message of the merge commit being rebased is passed to
the merge command using a subshell executing 'git rev-parse --sq-quote'.
Double quotes are needed around this subshell so that, newlines are
kept for the git merge command.
Before this patch, following merge message:
"Merge mybranch into mynewbranch
Awesome commit."
becomes:
"Merge mybranch into mynewbranch Awesome commit."
after a rebase -p.
Fixes: "dd6fb0053 rebase -p: fix quoting when calling `git merge`"
Reported-by: Jamie Iles <jamie.iles@oracle.com>
Suggested-by: Vegard Nossum <vegard.nossum@oracle.com>
Suggested-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Signed-off-by: Gregory Herrero <gregory.herrero@oracle.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This option allows commits with empty commit messages to be rebased,
matching the same option in git-commit and git-cherry-pick. While empty
log messages are frowned upon, sometimes one finds them in older
repositories (e.g. translated from another VCS [0]), or have other
reasons for desiring them. The option is available in git-commit and
git-cherry-pick, so it is natural to make other git tools play nicely
with them. Adding this as an option allows the default to be "give the
user a chance to fix", while not interrupting the user's workflow
otherwise [1].
[0]: https://stackoverflow.com/q/8542304
[1]: https://public-inbox.org/git/7vd33afqjh.fsf@alter.siamese.dyndns.org/
To implement this, add a new --allow-empty-message flag. Then propagate
it to all calls of 'git commit', 'git cherry-pick', and 'git rebase--helper'
within the rebase scripts.
Signed-off-by: Genki Sky <sky@genki.is>
Reviewed-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase -p -X<option>" did not propagate the option properly
down to underlying merge strategy backend.
* js/fix-merge-arg-quoting-in-rebase-p:
rebase -p: fix quoting when calling `git merge`
|
|
It has been reported that strategy arguments are not passed to `git
merge` correctly when rebasing interactively, preserving merges.
The reason is that the strategy arguments are already quoted, and then
quoted again.
This fixes https://github.com/git-for-windows/git/issues/1321
Original-patch-by: Kim Gybels <kgybels@infogroep.be>
Also-reported-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a *really* long-standing bug. As a matter of fact, this bug has
been with us from the very beginning of `rebase -i`: 1b1dce4bae7 (Teach
rebase an interactive mode, 2007-06-25), where the output of `rev-list`
was piped to `sed` (and any failure of the `rev-list` process would go
completely undetected).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recent work on `git-rebase--interactive` aims to convert shell code to
C. Even if this is most likely not a big performance enhancement, let's
convert it too since a coming change to abbreviate command names
requires it to be updated.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Typofix.
* ad/rebase-i-serie-typofix:
rebase -i: fix comment typo
|
|
* ad/rebase-i-serie-typofix:
rebase -i: fix comment typo
|
|
Signed-off-by: Adam Dinwoodie <adam@dinwoodie.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The final batch to "git rebase -i" updates to move more code from
the shell script to C.
* js/rebase-i-final:
rebase -i: rearrange fixup/squash lines using the rebase--helper
t3415: test fixup with wrapped oneline
rebase -i: skip unnecessary picks using the rebase--helper
rebase -i: check for missing commits in the rebase--helper
t3404: relax rebase.missingCommitsCheck tests
rebase -i: also expand/collapse the SHA-1s via the rebase--helper
rebase -i: do not invent onelines when expanding/collapsing SHA-1s
rebase -i: remove useless indentation
rebase -i: generate the script via rebase--helper
t3415: verify that an empty instructionFormat is handled as before
|
|
Interactive rebase was ignoring '--rerere-autoupdate'. Fix this by
reading it appropriate file when restoring the sequencer state for an
interactive rebase and passing '--rerere-autoupdate' to merge and
cherry-pick when rebasing with '--preserve-merges'.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This operation has quadratic complexity, which is especially painful
on Windows, where shell scripts are *already* slow (mainly due to the
overhead of the POSIX emulation layer).
Let's reimplement this with linear complexity (using a hash map to
match the commits' subject lines) for the common case; Sadly, the
fixup/squash feature's design neglected performance considerations,
allowing arbitrary prefixes (read: `fixup! hell` will match the
commit subject `hello world`), which means that we are stuck with
quadratic performance in the worst case.
The reimplemented logic also happens to fix a bug where commented-out
lines (representing empty patches) were dropped by the previous code.
While at it, clarify how the fixup/squash feature works in `git rebase
-i`'s man page.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In particular on Windows, where shell scripts are even more expensive
than on MacOSX or Linux, it makes sense to move a loop that forks
Git at least once for every line in the todo list into a builtin.
Note: The original code did not try to skip unnecessary picks of root
commits but punts instead (probably --root was not considered common
enough of a use case to bother optimizing). We do the same, for now.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In particular on Windows, where shell scripts are even more expensive
than on MacOSX or Linux, it makes sense to move a loop that forks
Git at least once for every line in the todo list into a builtin.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is crucial to improve performance on Windows, as the speed is now
mostly dominated by the SHA-1 transformation (because it spawns a new
rev-parse process for *every* line, and spawning processes is pretty
slow from Git for Windows' MSYS2 Bash).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To avoid problems with short SHA-1s that become non-unique during the
rebase, we rewrite the todo script with short/long SHA-1s before and
after letting the user edit the script. Since SHA-1s are not intuitive
for humans, rebase -i also provides the onelines (commit message
subjects) in the script, purely for the user's convenience.
It is very possible to generate a todo script via different means than
rebase -i and then to let rebase -i run with it; In this case, these
onelines are not required.
And this is where the expand/collapse machinery has a bug: it *expects*
that oneline, and failing to find one reuses the previous SHA-1 as
"oneline".
It was most likely an oversight, and made implementation in the (quite
limiting) shell script language less convoluted. However, we are about
to reimplement performance-critical parts in C (and due to spawning a
git.exe process for every single line of the todo script, the
expansion/collapsing of the SHA-1s *is* performance-hampering on
Windows), therefore let's fix this bug to make cross-validation with the
C version of that functionality possible.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The commands used to be indented, and it is nice to look at, but when we
transform the SHA-1s, the indentation is removed. So let's do away with it.
For the moment, at least: when we will use the upcoming rebase--helper
to transform the SHA-1s, we *will* keep the indentation and can
reintroduce it. Yet, to be able to validate the rebase--helper against
the output of the current shell script version, we need to remove the
extra indentation.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The first step of an interactive rebase is to generate the so-called "todo
script", to be stored in the state directory as "git-rebase-todo" and to
be edited by the user.
Originally, we adjusted the output of `git log <options>` using a simple
sed script. Over the course of the years, the code became more
complicated. We now use shell scripting to edit the output of `git log`
conditionally, depending whether to keep "empty" commits (i.e. commits
that do not change any files).
On platforms where shell scripting is not native, this can be a serious
drag. And it opens the door for incompatibilities between platforms when
it comes to shell scripting or to Unix-y commands.
Let's just re-implement the todo script generation in plain C, using the
revision machinery directly.
This is substantially faster, improving the speed relative to the
shell script version of the interactive rebase from 2x to 3x on Windows.
Note that the rearrange_squash() function in git-rebase--interactive
relied on the fact that we set the "format" variable to the config setting
rebase.instructionFormat. Relying on a side effect like this is no good,
hence we explicitly perform that assignment (possibly again) in
rearrange_squash().
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that the sequencer learned to process a "normal" interactive rebase,
we use it. The original shell script is still used for "non-normal"
interactive rebases, i.e. when --root or --preserve-merges was passed.
Please note that the --root option (via the $squash_onto variable) needs
special handling only for the very first command, hence it is still okay
to use the helper upon continue/skip.
Also please note that the --no-ff setting is volatile, i.e. when the
interactive rebase is interrupted at any stage, there is no record of
it. Therefore, we have to pass it from the shell script to the
rebase--helper.
Note: the test t3404 had to be adjusted because the the error messages
produced by the sequencer comply with our current convention to start with
a lower-case letter.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase -i" with a recent update started showing an incorrect
count when squashing more than 10 commits.
* jk/rebase-i-squash-count-fix:
rebase--interactive: count squash commits above 10 correctly
|
|
We generate the squash commit message incrementally running
a sed script once for each commit. It parses "This is
a combination of <N> commits" from the first line of the
existing message, adds one to <N>, and uses the result as
the number of our current message.
Since f2d17068fd (i18n: rebase-interactive: mark comments of
squash for translation, 2016-06-17), the first line may be
localized, and sed uses a pretty liberal regex, looking for:
/^#.*([0-9][0-9]*)/
The "[0-9][0-9]*" tries to match double digits, but it
doesn't quite work. The first ".*" is greedy, so if you
have:
This is a combination of 10 commits.
it will eat up "This is a combination of 1", leaving "0" to
match the first "[0-9]" digit, and then skipping the
optional match of "[0-9]*".
As a result, the count resets every 10 commits, and a
15-commit squash would end up as:
# This is a combination of 5 commits.
# This is the 1st commit message:
...
# This is the commit message #2:
... and so on ..
# This is the commit message #10:
...
# This is the commit message #1:
...
# This is the commit message #2:
... etc, up to 5 ...
We can fix this by making the ".*" less greedy. Instead of
depending on ".*?" working portably, we can just limit the
match to non-digit characters, which accomplishes the same
thing.
Reported-by: Brandon Tolsch <btolsch@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* va/i18n-even-more:
i18n: fix misconversion in shell scripts
|
|
An earlier series that was merged at 2703572b3a ("Merge branch
'va/i18n-even-more'", 2016-07-13) failed to use $(eval_gettext
"string with \$variable interpolation") and instead used gettext in
a few places, and ended up showing the variable names in the
message, e.g.
$ git submodule
fatal: $program_name cannot be used without a working tree.
Catch these mistakes with
$ git grep -n '[^_]gettext .*\\\$'
and fix them all to use eval_gettext instead.
Reported-by: Josh Bleecher Snyder
Acked-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase -i" did not work well with core.commentchar
configuration variable for two reasons, both of which have been
fixed.
* js/rebase-i-commentchar-fix:
rebase -i: handle core.commentChar=auto
stripspace: respect repository config
rebase -i: highlight problems with core.commentchar
|
|
When 84c9dc2 (commit: allow core.commentChar=auto for character auto
selection, 2014-05-17) extended the core.commentChar functionality to
allow for the value 'auto', it forgot that rebase -i was already taught to
handle core.commentChar, and in turn forgot to let rebase -i handle that
new value gracefully.
Reported by Taufiq Hoven.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git rebase -i" is given a broken instruction, it told the
user to fix it with "--edit-todo", but didn't say what the step
after that was (i.e. "--continue").
* rt/rebase-i-broken-insn-advise:
rebase -i: improve advice on bad instruction lines
|
|
Even when "git pull --rebase=preserve" (and the underlying "git
rebase --preserve") can complete without creating any new commit
(i.e. fast-forwards), it still insisted on having a usable ident
information (read: user.email is set correctly), which was less
than nice. As the underlying commands used inside "git rebase"
would fail with a more meaningful error message and advice text
when the bogus ident matters, this extra check was removed.
* jk/rebase-i-drop-ident-check:
rebase-interactive: drop early check for valid ident
|
|
When "git rebase -i" is given a broken instruction, it told the
user to fix it with "--edit-todo", but didn't say what the step
after that was (i.e. "--continue").
* rt/rebase-i-broken-insn-advise:
rebase -i: improve advice on bad instruction lines
|
|
Even when "git pull --rebase=preserve" (and the underlying "git
rebase --preserve") can complete without creating any new commit
(i.e. fast-forwards), it still insisted on having a usable ident
information (read: user.email is set correctly), which was less
than nice. As the underlying commands used inside "git rebase"
would fail with a more meaningful error message and advice text
when the bogus ident matters, this extra check was removed.
* jk/rebase-i-drop-ident-check:
rebase-interactive: drop early check for valid ident
|