Age | Commit message (Collapse) | Author |
|
Improve error reporting when SMTP TLS fails.
* jk/send-email-ssl-errors:
send-email: enable SSL level 1 debug output
|
|
If a server's certificate isn't accepted by send-email, the output is:
Unable to initialize SMTP properly. Check config and use --smtp-debug.
but adding --smtp-debug=1 just produces the same output since we don't
get as far as talking SMTP.
Turning on SSL debug at level 1 gives:
DEBUG: .../IO/Socket/SSL.pm:1796: SSL connect attempt failed error:14090086:SSL routines:ssl3_get_server_certificate:certificate verify failed
DEBUG: .../IO/Socket/SSL.pm:673: fatal SSL error: SSL connect attempt failed error:14090086:SSL routines:ssl3_get_server_certificate:certificate verify failed
DEBUG: .../IO/Socket/SSL.pm:1780: IO::Socket::IP configuration failed
IO::Socket::SSL defines level 1 debug as "print out errors from
IO::Socket::SSL and ciphers from Net::SSLeay". In fact, it aliases
Net::SSLeay::trace which is defined to guarantee silence at level 0 and
only emit error messages at level 1, so let's enable it by default.
The modification of warnings is needed to avoid a warning about:
Name "IO::Socket::SSL::DEBUG" used only once: possible typo
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach send-email to dump mail aliases, so that we can do tab completion
on the command line.
* jk/send-email-complete-aliases:
completion: add support for completing email aliases
sendemail: teach git-send-email to dump alias names
|
|
Use a safer behavior when we hit errors verifying remote certificates.
* jk/send-email-ca-path:
send-email: die if CA path doesn't exist
|
|
If the CA path isn't found it's most likely to indicate a
misconfiguration, in which case accepting any certificate is unlikely to
be the correct thing to do.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Jeff King <peff@peff.net>
|
|
As it says in the name, the SSL certificate path is a path so treat it
as one and support tilde-expansion.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Add an option "--dump-aliases" which changes the default behavior of
git-send-email. This mode will simply read the alias files configured by
sendemail.aliasesfile and sendemail.aliasfiletype and dump a list of all
configured aliases, one per line. The intended use case for this option
is the bash-completion script which will use it to autocomplete aliases
on the options which take addresses.
Add some tests for the new option using various alias file formats.
A possible future extension to the alias dump format could be done by
extending the --dump-aliases to take an optional argument defining the
format to display. This has not been done in this patch as no user of
this information has been identified.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
|
|
When "git send-email" wanted to talk over Net::SMTP::SSL,
Net::Cmd::datasend() did not like to be fed too many bytes at the
same time and failed to send messages. Send the payload one line
at a time to work around the problem.
* sa/send-email-smtp-batch-data-limit:
git-send-email.perl: Fixed sending of many/huge changes/patches
|
|
When "git send-email" wanted to talk over Net::SMTP::SSL,
Net::Cmd::datasend() did not like to be fed too many bytes at the
same time and failed to send messages. Send the payload one line
at a time to work around the problem.
* sa/send-email-smtp-batch-data-limit:
git-send-email.perl: Fixed sending of many/huge changes/patches
|
|
Sometimes sending huge patches/commits fail with
[Net::SMTP::SSL] Connection closed at /usr/lib/git-core/git-send-email
line 1320.
Running the command with --smtp-debug=1 yields to
Net::SMTP::SSL: Net::Cmd::datasend(): unexpected EOF on command channel:
at /usr/lib/git-core/git-send-email line 1320.
[Net::SMTP::SSL] Connection closed at /usr/lib/git-core/git-send-email
line 1320.
Stefan described it in his mail like this:
It seems to me that there is a size limit, after cutting down the patch
to ~16K, sending started to work. I cut it twice, once by removing lines
from the head and once from the bottom, in both cases at the size of
around 16K I could send the patch.
See also original report:
http://permalink.gmane.org/gmane.comp.version-control.git/274569
Reported-by: Juston Li <juston.h.li@gmail.com>
Tested-by: Markos Chandras <hwoarang@gentoo.org>
Signed-off-by: Lars Wendler <polynomial-c@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a minor regression brought in to "git send-email" by a recent
addition of the "--smtp-auth" option.
* bn/send-email-smtp-auth-error-message-fix:
send-email: fix uninitialized var warning for $smtp_auth
|
|
On the latest version of git-send-email, I see this error just before
running SMTP auth (I didn't provide any --smtp-auth= parameter):
Use of uninitialized value $smtp_auth in pattern match (m//) at \
/home/briannorris/git/git/git-send-email.perl line 1139.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git send-email" learned a new option --smtp-auth to limit the SMTP
AUTH mechanisms to be used to a subset of what the system library
supports.
* jv/send-email-selective-smtp-auth:
send-email: provide whitelist of SMTP AUTH mechanisms
|
|
When sending an e-mail, the client and server must agree on an
authentication mechanism. Some servers (due to misconfiguration
or a bug) deny valid credentials for certain mechanisms. In this
patch, a new option --smtp-auth and configuration entry smtpAuth
are introduced. If smtp_auth is defined, it works as a whitelist
of allowed mechanisms for authentication selected from the ones
supported by the installed SASL perl library.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git send-email" now performs alias-expansion on names that are
given via --cccmd, etc.
This round comes with a lot more enhanced e-mail address parser,
which makes it a bit scary, but as long as it works as designed, it
makes it wonderful ;-).
* rl/send-email-aliases:
send-email: suppress meaningless whitespaces in from field
send-email: allow multiple emails using --cc, --to and --bcc
send-email: consider quote as delimiter instead of character
send-email: reduce dependencies impact on parse_address_line
send-email: minor code refactoring
send-email: allow use of aliases in the From field of --compose mode
send-email: refactor address list process
t9001-send-email: refactor header variable fields replacement
send-email: allow aliases in patch header and command script outputs
t9001-send-email: move script creation in a setup test
|
|
Remove leading and trailing whitespaces in from field before
interepreting it to improve consistency with other options. The
split_addrs function already take care of trailing and leading
whitespaces for to, cc and bcc fields.
The from option now:
- has the same behavior when passing arguments like
" jdoe@example.com ", "\t jdoe@example.com " or
"jdoe@example.com".
- interprets aliases in string containing leading and trailing
whitespaces such as " alias" or "alias\t" like other options.
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Accept a list of emails separated by commas in flags --cc, --to and
--bcc. Multiple addresses can already be given by using these options
multiple times, but it is more convenient to allow cutting-and-pasting
a list of addresses from the header of an existing e-mail message,
which already lists them as comma-separated list, as a value to a
single parameter.
The following format can now be used:
$ git send-email --to='Jane <jdoe@example.com>, mike@example.com'
Remove the limitation imposed by 79ee555b (Check and document the
options to prevent mistakes, 2006-06-21) which rejected every argument
with comma in --cc, --to and --bcc.
Signed-off-by: Mathieu Lienard--Mayor <Mathieu.Lienard--Mayor@ensimag.imag.fr>
Signed-off-by: Jorge Juan Garcia Garcia <Jorge-Juan.Garcia-Garcia@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Do not consider quote inside a recipient name as character when
they are not escaped. This interprets:
"Jane" "Doe" <jdoe@example.com>
as:
"Jane Doe" <jdoe@example.com>
instead of:
"Jane\" \"Doe" <jdoe@example.com>
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
parse_address_line had not the same behavior whether the user had
Mail::Address or not. Teach parse_address_line to behave like
Mail::Address.
When the user input is correct, this implementation behaves
exactly like Mail::Address except when there are quotes
inside the name:
"Jane Do"e <jdoe@example.com>
In this case the result of parse_address_line is:
With M::A : "Jane Do" e <jdoe@example.com>
Without : "Jane Do e" <jdoe@example.com>
When the user input is not correct, the behavior is also mostly
the same.
Unlike Mail::Address, this doesn't parse groups and recursive
commentaries.
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Group expressions in a single if statement. This avoid checking
multiple time if the variable $sender is defined.
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Aliases were expanded before considering the From field of the
--compose option. This is inconsistent with other fields
(To, Cc, ...) which already support aliases.
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Simplify code by creating a function which transform a list of strings
containing email addresses (separated by commas, comporting aliases)
into a clean list of valid email addresses.
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Interpret aliases in:
- Header fields of patches generated by git format-patch
(using --to, --cc, --add-header for example) or
manually modified. Example of fields in header:
To: alias1
Cc: alias2
Cc: alias3
- Outputs of command scripts specified by --cc-cmd and
--to-cmd. Example of script:
#!/bin/sh
echo alias1
echo alias2
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sendmail aliases parser diagnoses unsupported features and
unrecognized lines. For completeness, also warn about unsupported
redirection to "/path/name" and "|command", as well as ":include:".
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Logical lines in sendmail aliases files can be spread over multiple
physical lines[1]. A line beginning with whitespace is folded into the
preceding line. A line ending with '\' consumes the following line.
[1]: https://www.freebsd.org/cgi/man.cgi?query=aliases&sektion=5
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace unnecessarily complex regular expression for recognizing comment
and blank lines in sendmail aliases with idiomatic expressions which
can be easily understood at a glance.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sendmail aliases parser inlined into %parse_alias is already
uncomfortably large and is expected to grow as additional functionality
is implemented, so extract it to improve manageability.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Although emitted to stderr, warnings from the sendmail aliases parser
are not visually distinguished as such, and thus can easily be
overlooked in the normal noisy send-email output.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach send-email to read aliases in the sendmail aliases format, i.e.
<alias>: <address|alias>[, <address|alias>...]
Examples:
alice: Alice W Land <awol@example.com>
bob: Robert Bobbyton <bob@example.com>
# this is a comment
# this is also a comment
chloe: chloe@example.com
abgroup: alice, bob
bcgrp: bob, chloe, Other <o@example.com>
- Quoted aliases and quoted addresses are not supported.
- Line continuations are not supported.
Warnings are printed for explicitly unsupported constructs, and any
other lines that are not matched by the parser.
Signed-off-by: Allen Hubbe <allenbh@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Even though we officially haven't dropped Perl 5.8 support, the
Getopt::Long package that came with it does not support "--no-"
prefix to negate a boolean option; manually add support to help
people with older Getopt::Long package.
* km/send-email-getopt-long-workarounds:
git-send-email.perl: support no- prefix with older GetOptions
|
|
"git send-email" used to accept a mistaken "y" (or "yes") as an
answer to "What encoding do you want to use [UTF-8]? " without
questioning. Now it asks for confirmation when the answer looks
too short to be a valid encoding name.
* jc/send-email-sensible-encoding:
send-email: ask confirmation if given encoding name is very short
|
|
Only Perl version 5.8.0 or later is required, but that comes with
an older Getopt::Long (2.32) that does not support the 'no-'
prefix. Support for that was added in Getopt::Long version 2.33.
Since the help only mentions the 'no-' prefix and not the 'no'
prefix, add explicit support for the 'no-' prefix to support
older GetOptions versions.
Reported-by: Tom G. Christensen <tgc@statsbiblioteket.dk>
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Tested-by: Tom G. Christensen <tgc@statsbiblioteket.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Sometimes people respond "y<ENTER>" (or "yes<ENTER>") when asked
this question:
Which 8bit encoding should I declare [UTF-8]?
We already have a mechanism to avoid accepting a mistyped e-mail
address (we ask to confirm when the given address lacks "@" in it);
reuse it to trigger the same confirmation when given a very short
answer. As a typical charset name is probably at least 4 chars or
longer (e.g. "UTF8" spelled without the dash, or "Big5"), this would
prevent such a mistake.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git send-email" normally identifies itself via X-Mailer: header
in the message it sends out. A new command line flag allows the
user to squelch the header.
* lh/send-email-hide-x-mailer:
test/send-email: --[no-]xmailer tests
send-email: add --[no-]xmailer option
|
|
"git send-email" did not handle RFC 2047 encoded headers quite
right.
* rd/send-email-2047-fix:
send-email: handle adjacent RFC 2047-encoded words properly
send-email: align RFC 2047 decoding more closely with the spec
|
|
Add --[no-]xmailer that allows a user to disable adding the 'X-Mailer:'
header to the email being sent.
Signed-off-by: Luis Henriques <henrix@camandro.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The RFC says that they are to be concatenated after decoding (i.e. the
intervening whitespace is ignored).
Signed-off-by: Роман Донченко <dpb@corrigendum.ru>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
More specifically:
* Add "\" to the list of characters not allowed in a token (see RFC 2047
errata).
* Share regexes between unquote_rfc2047 and is_rfc2047_quoted. Besides
removing duplication, this also makes unquote_rfc2047 more stringent.
* Allow both "q" and "Q" to identify the encoding.
* Allow lowercase hexadecimal digits in the "Q" encoding.
And, more on the cosmetic side:
* Change the "encoded-text" regex to exclude rather than include characters,
for clarity and consistency with "token".
Signed-off-by: Роман Донченко <dpb@corrigendum.ru>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The thread at http://thread.gmane.org/gmane.comp.version-control.git/257392
details problems when applying patches with "git am" in a repository with
CRLF line endings. In the example in the thread, the repository originated
from "git-svn" so it is not possible to use core.eol and friends on it.
Right now, the best option is to use "git am --keep-cr". However, when
a patch create new files, the patch application process will reject the
new file because it finds a "/dev/null\r" string instead of "/dev/null".
The problem is that SMTP transport is CRLF-unsafe. Sending a patch by
email is the same as passing it through "dos2unix | unix2dos". The newly
introduced CRLFs are normally transparent because git-am strips them. The
keepcr=true setting preserves them, but it is mostly working by chance
and it would be very problematic to have a "git am" workflow in a
repository with mixed LF and CRLF line endings.
The MIME solution to this is the quoted-printable transfer enconding.
This is not something that we want to enable by default, since it makes
received emails horrible to look at. However, it is a very good match
for projects that store CRLF line endings in the repository.
The only disadvantage of quoted-printable is that quoted-printable
patches fail to apply if the maintainer uses "git am --keep-cr". This
is because the decoded patch will have two carriage returns at the end
of the line. Therefore, add support for base64 transfer encoding too,
which makes received emails downright impossible to look at outside
a MUA, but really just works.
The patch covers all bases, including users that still live in the late
80s, by also providing a 7bit content transfer encoding that refuses
to send emails with non-ASCII character in them. And finally, "8bit"
will add a Content-Transfer-Encoding header but otherwise do nothing.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After the next patch, git-send-email will sometimes modify
existing Content-Transfer-Encoding headers. Delay the addition
of the header to @xh until just before sending. Do the same
for MIME-Version, to avoid adding it twice.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mt/send-email-cover-to-cc:
t9001: avoid non-portable '\n' with sed
test/send-email: to-cover, cc-cover tests
git-send-email: two new options: to-cover, cc-cover
|
|
Allow extracting To/Cc addresses from the first patch
(typically the cover letter), and use them as To/Cc addresses of the
remainder of the series.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Tighten the regexp used in the "file_name_is_absolute" replacement
used on msys to declare that only "[a-zA-Z]:" that appear at the
very beginning is a path with a drive-prefix.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On Windows, absolute paths might start with a DOS drive prefix,
which these two checks failed to recognize.
Unfortunately, we cannot simply use the file_name_is_absolute
helper in File::Spec::Functions, because Git for Windows has an
MSYS-based Perl, where this helper doesn't grok DOS
drive-prefixes.
So let's manually check for these in that case, and fall back to
the File::Spec-helper on other platforms (e.g Win32 with native
Perl)
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A recent update to "git send-email" broke platforms where
/etc/ssl/certs/ directory exists but cannot be used as SSL_ca_path
(e.g. Fedora rawhide).
* rk/send-email-ssl-cert:
send-email: /etc/ssl/certs/ directory may not be usable as ca_path
|
|
The "if /etc/ssl/certs/ directory exists, explicitly telling the
library to use it as SSL_ca_path" blind-defaulting in "git
send-email" broke platforms where /etc/ssl/certs/ directory exists,
but it cannot used as SSL_ca_path (e.g. Fedora rawhide). Fix it by
not specifying any SSL_ca_path/SSL_ca_file but still asking for peer
verification in such a case.
* rk/send-email-ssl-cert:
send-email: /etc/ssl/certs/ directory may not be usable as ca_path
|
|
When sending patches on Fedora rawhide with
git-1.8.5.2-1.fc21.x86_64 and perl-IO-Socket-SSL-1.962-1.fc21.noarch,
with the following
[sendemail]
smtpencryption = tls
smtpserver = smtp.gmail.com
smtpuser = ruben@rubenkerkhof.com
smtpserverport = 587
git-send-email fails with:
STARTTLS failed! SSL connect attempt failed with unknown error
error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate
verify failed at /usr/libexec/git-core/git-send-email line 1236.
The current code detects the presence of /etc/ssl/certs directory
(it actually is a symlink to another directory, but that does not
matter) and uses SSL_ca_path to point at it when initializing the
connection with IO::Socket::SSL or Net::SMTP::SSL. However, on the
said platform, it seems that this directory is not designed to be
used as SSL_ca_path. Using a single file inside that directory
(cert.pem, which is a Mozilla CA bundle) with SSL_ca_file does work,
and also not specifying any SSL_ca_file/SSL_ca_path (and letting the
library use its own default) and asking for peer verification does
work.
By removing the code that blindly defaults $smtp_ssl_cert_path to
"/etc/ssl/certs", we can prevent the codepath that treats any
directory specified with that variable as usable for SSL_ca_path
from incorrectly triggering.
This change could introduce a regression for people on a platform
whose certificate directory is /etc/ssl/certs but its IO::Socket:SSL
somehow fails to use it as SSL_ca_path without being told. Using
/etc/ssl/certs directory as SSL_ca_path by default like the current
code does would have been hiding such a broken installation without
its user needing to do anything. These users can still work around
such a platform bug by setting the configuration variable explicitly
to point at /etc/ssl/certs.
This change should not negate what 35035bbf (send-email: be explicit
with SSL certificate verification, 2013-07-18), which was the
original change that introduced the defaulting to /etc/ssl/certs/,
attempted to do, which is to make sure we do not communicate over
insecure connection by default, triggering warning from the library.
Cf. https://bugzilla.redhat.com/show_bug.cgi?id=1043194
Tested-by: Igor Gnatenko <i.gnatenko.brain@gmail.com>
Signed-off-by: Ruben Kerkhof <ruben@rubenkerkhof.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When --smtp-encryption=ssl, we use a Net::SMTP::SSL connection,
passing its ->new all the options that would otherwise go to
Net::SMTP->new (most options) and IO::Socket::SSL->start_SSL (for the
SSL options).
However, while Net::SMTP::SSL replaces the underlying socket class
with an SSL socket, it does nothing to allow passing options to that
socket. So the SSL-relevant options are lost.
Fortunately there is an escape hatch: we can directly set the options
with IO::Socket::SSL::set_client_defaults. They will then persist
within the IO::Socket::SSL module.
Signed-off-by: Thomas Rast <tr@thomasrast.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|