Age | Commit message (Collapse) | Author |
|
Currently, in sub 'close_file', git-svn creates a temporary file and
copies the contents of the blob to be written into it. This is useful
for symlinks because svn stores symlinks in the form:
link $FILE_PATH
Git creates a blob only out of '$FILE_PATH' and uses file mode to
indicate that the blob should be interpreted as a symlink.
As git-hash-object is invoked with --stdin-paths, a duplicate of the
link from svn must be created that leaves off the first five bytes,
i.e. 'link '. However, this is wholly unnecessary for normal blobs,
though, as we already have a temp file with their contents. Copying
the entire file gains nothing, and effectively requires a file to be
written twice before making it into the object db.
This patch corrects that issue, holding onto the substr-like
duplication for symlinks, but skipping it altogether for normal blobs
by reusing the existing temp file.
Signed-off-by: Marcus Griep <marcus@griep.us>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
Currently, git-svn would create a temp file on four occasions:
1. Reading a blob out of the object db
2. Creating a delta from svn
3. Hashing and writing a blob into the object db
4. Reading a blob out of the object db (in another place in code)
Any time git-svn did the above, it would dutifully create and then
delete said temp file. Unfortunately, this means that between 2-4
temporary files are created/deleted per file 'add/modify'-ed in
svn (O(n)). This causes significant overhead and helps the inode
counter to spin beautifully.
By its nature, git-svn is a serial beast. Thus, reusing a temp file
does not pose significant problems. "truncate and seek" takes much
less time than "unlink and create". This patch centralizes the
tempfile creation and holds onto the tempfile until they are deleted
on exit. This significantly reduces file overhead, now requiring
at most three (3) temp files per run (O(1)).
Signed-off-by: Marcus Griep <marcus@griep.us>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
Oops, I let a few patches slip by with long lines in them.
Extracted from an unrelated patch by: Marcus Griep <marcus@griep.us>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some repositories use a deep branching strategy, such as:
branches/1.0/1.0.rc1
branches/1.0/1.0.rc2
branches/1.0/1.0.rtm
branches/1.0/1.0.gold
Only allowing a single glob stiffles this.
This change allows for a single glob 'set' to accept this deep
branching strategy.
The ref glob depth must match the branch glob depth. When using
the -b or -t options for init or clone, this is automatically
done.
For example, using the above branches:
svn-remote.svn.branches = branches/*/*:refs/remote/*/*
gives the following branch names:
1.0/1.0.rc1
1.0/1.0.rc2
1.0/1.0.rtm
1.0/1.0.gold
[ew:
* removed unrelated line-wrapping changes
* fixed line-wrapping in a few more places
* removed trailing whitespace
* fixed bashism in test
* removed unnecessary httpd startup in test
* changed copyright on tests to 2008 Marcus Griep
* added executable permissions to new tests
]
Signed-off-by: Marcus Griep <marcus@griep.us>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fixes bad regex match check for multiple globs (would always return
one glob regardless of actual number).
[ew: fixed a bashism in the test and some minor line-wrapping]
Signed-off-by: Marcus Griep <marcus@griep.us>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This allows one to use public svn:// URLs for fetch and
svn+ssh:// URLs for committing (without using the complicated
rewriteRoot option, reimporting or git-filter-branch).
Using this can also help avoid unnecessary server
authentication/encryption overhead on busy SVN servers.
Along with the new --revision option, this can also be allowed
to override the branch detection in dcommit, too. This is
potentially dangerous and not recommended! (And also purposely
undocumented, but the loaded gun is there in case somebody
wants to make it safe).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
canonicalize_path() was previously changed to better
fit SVN 1.5, but it makes the "info" command not match
svn(1) in two places:
1) URL ended up with a trailing slash when run without an
argument.
2) "Path: " was displayed instead of "Path: ." when run
without an argument.
We will also handle odd cases where a user wants to
get information on a file or directory named "0", too.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, if a config entry looked like this:
svn-remote.svn.fetch=:refs/heads/whatever
git-svn would silently do nothing if you asked it to "git svn fetch", and
give a strange error if asked to "git svn dcommit". What it really wants is
a line that looks like this:
svn-remote.svn.fetch=:refs/remotes/whatever
So we should simply abort if we get the wrong thing.
On the other hand, there's actually no good reason for git-svn to enforce
using the refs/remotes namespace, but the code seems to have hardcoded this
in several places and I'm not brave enough to try to fix it all right now.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Subversion repositories often require files to have properties such as
svn:mime-type and svn:eol-style set when they are added. Users
typically set these properties automatically using the SVN auto-props
feature with 'svn add'. This commit teaches dcommit to look at the user
SVN configuration and apply matching auto-props entries for files added
by a diff as it is applied to the SVN remote.
Signed-off-by: Brad King <brad.king@kitware.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
commit 2fe403e7452bd6e1e8232445cf5434ce8f1af973 broke "git-svn info ."
due to replacing '.' with '' in canonicalize_path for the top directory,
while find_file_type_and_diff_status was not corrected.
Bug reports:
http://thread.gmane.org/gmane.comp.version-control.git/87822/
http://bugs.debian.org/490400
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sb/dashless:
Make usage strings dash-less
t/: Use "test_must_fail git" instead of "! git"
t/test-lib.sh: exit with small negagive int is ok with test_must_fail
Conflicts:
builtin-blame.c
builtin-mailinfo.c
builtin-mailsplit.c
builtin-shortlog.c
git-am.sh
t/t4150-am.sh
t/t4200-rerere.sh
|
|
Signed-off-by: Frederik Schwarzer <schwarzerf@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
find-rev and rebase error out on svm because git-svn doesn't trace the
original svn revision numbers back to git commits. The updated test
case, included in the patch, shows the issue and passes with the rest of
the patch applied.
This fixes Git::SVN::find_by_url to find branches based on the
svm:source URL, where useSvmProps is set. Also makes sure cmd_find_rev
and working_head_info use the information they have to correctly track
the source repository. This is enough to get find-rev and rebase
working.
Signed-off-by: João Abecasis <joao@abecasis.name>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When you misuse a git command, you are shown the usage string.
But this is currently shown in the dashed form. So if you just
copy what you see, it will not work, when the dashed form
is no longer supported.
This patch makes git commands show the dash-less version.
For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh
generates a dash-less usage string now.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With subversion 1.5.0 (C and perl libraries) the git-svn selftest
t9101-git-svn-props.sh fails at test 25 and 26. The following commands
cause assertions in the svn library
$ cd deeply
$ git-svn propget svn:ignore .
perl: /build/buildd/subversion-1.5.0dfsg1/subversion/libsvn_ra/ra_loader.c:674: svn_ra_get_dir: Assertion `*path != '/'' failed.
Aborted
$ git-svn propget svn:ignore ..
perl: /build/buildd/subversion-1.5.0dfsg1/subversion/libsvn_subr/path.c:120: svn_path_join: Assertion `is_canonical(component, clen)' failed.
With this commit, git-svn makes sure the path doesn't start with a
slash, and is not a dot, working around these assertions.
The breakage was reported by Lucas Nussbaum through
http://bugs.debian.org/489108
Signed-off-by: Gerrit Pape <pape@smarden.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The original sanitization code was just taken from the
remotes2config.sh shell script in contrib.
Credit to Avery Pennarun for noticing this mistake, and Junio
for clarifying the rules for config section names:
Junio C Hamano wrote in <7vfxr23s6m.fsf@gitster.siamese.dyndns.org>:
> In
>
> [foo "bar"] baz = value
>
> foo and baz must be config.c::iskeychar() (and baz must be isalpha()), but
> "bar" can be almost anything.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit ffe256f9bac8a40ff751a9341a5869d98f72c285 ("git-svn: Speed up fetch")
introduced changes that create a temporary file for each object fetched by
svn. These files should be deleted automatically, but perl apparently
doesn't do this until the process exits (or perhaps when its garbage
collector runs).
This means that on a large fetch, especially with lots of branches, we
sometimes fill up /tmp completely, which prevents the next temp file from
being written completely. This is aggravated by the fact that a new temp
file is created for each updated file, even if that update produces a file
identical to one already in git. Thus, it can happen even if there's lots
of disk space to store the finished repository.
We weren't adequately checking for write errors, so this would result in an
invalid file getting committed, which caused git-svn to fail later with an
invalid checksum.
This patch adds a check to syswrite() so similar problems don't lead to
corruption in the future. It also unlink()'s each temp file explicitly
when we're done with it, so the disk doesn't need to fill up.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com>
Tested-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Suppose someone fetches git-svn-ified commits from another repo and then
attempts to use 'git-svn init --rewrite-root=foo bar'. Using git svn rebase
after that will fail badly:
* For each commit tried by working_head_info, rebuild is called indirectly.
* rebuild will iterate over all commits and skip all of them because the
URL does not match. Because of that no rev_map file is generated at all.
* Thus, rebuild will run once for every commit. This takes ages.
* In the end there still isn't any rev_map file and thus working_head_info
fails.
Addressing this behaviour fixes an apparently not too uncommon problem with
providing git-svn mirrors of Subversion repositories. Some repositories are
accessed using different URLs depending on whether the user has push
privileges or not. In the latter case, an anonymous URL is often used that
differs from the push URL. Providing a mirror that is usable in both cases
becomes a lot more possible with this change.
Signed-off-by: Jan Krüger <jk@jk.gs>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In git, all commits end in exactly one newline character. In svn, commits
end in zero or more newlines. Thus, when importing commits from svn into
git, git-svn always appends two extra newlines to ensure that the
git-svn-id: line is separated from the main commit message by at least one
blank line.
Combined with the terminating newline that's always present in svn commits
produced by git, you usually end up with two blank lines instead of one
between the commit message and git-svn-id: line, which is undesirable.
Instead, let's remove all trailing whitespace from the git commit on the way
through to svn.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If url://repo/trunk is the current Git branch, prop_walk strips trunk
from the path name. That is useful as, for example "git svn show-ignore"
should not return results like
trunk/foo
but
foo
if svn:ignore for trunk includes foo.
The problem now is that prop_walk strips trunk from the path and then
calls itself recursively. But now trunk is missing in the path and
get_dir fails, because it is called for a non existing path.
The attached patch fixed the problem, by adding the previously stipped
$self->{path} in the recursive call. I tested it with my current
git-svn repository for the commands show-ignore and show-external.
Patch was submitted through
http://bugs.debian.org/477393
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When working with multiple branches in an svn repository, it can be
useful to verify the svn repository and local tracking branch that will
be used for the rebase operation.
Signed-off-by: Seth Falcon <seth@userprimary.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Given an SVN repo file:///tmp/svntest/repo, trying to commit changes
to a file proj/trunk/foo.txt in that repo with this command line
git svn commit-diff -r2 HEAD^ HEAD file:///tmp/svntest/repo/proj/trunk
gave the error message
Filesystem has no item: File not found: transaction '2-6', path
'/proj/trunk/proj/trunk/foo.txt'
This fixes the duplication.
Signed-off-by: Karl Hasselström <kha@treskal.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recent "git-svn optimization" series introduced Git::cat_blob() subroutine
whose interface was broken in that it returned the size of the blob but
signalled an error by returning 0. You can never use an empty blob with
such an interface.
This fixes the interface to return a negative value to signal an error.
Reported by Björn Steinbrink.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ar/batch-cat:
change quoting in test t1006-cat-file.sh
builtin-cat-file.c: use parse_options()
git-svn: Speed up fetch
Git.pm: Add hash_and_insert_object and cat_blob
Git.pm: Add command_bidi_pipe and command_close_bidi_pipe
git-hash-object: Add --stdin-paths option
Add more tests for git hash-object
Move git-hash-object tests from t5303 to t1007
git-cat-file: Add --batch option
git-cat-file: Add --batch-check option
git-cat-file: Make option parsing a little more flexible
git-cat-file: Small refactor of cmd_cat_file
Add tests for git cat-file
|
|
* ap/svn:
git-svn: add test for --add-author-from and --use-log-author
git-svn: add documentation for --add-author-from option.
git-svn: Add --add-author-from option.
git-svn: add documentation for --use-log-author option.
|
|
We were spending a lot of time forking/execing git-cat-file and
git-hash-object. We now maintain a global Git repository object in order to use
Git.pm's more efficient hash_and_insert_object and cat_blob methods.
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-svn blame produced output in the format of git blame; in environments
where there are scripts that read the output of svn blame, it's useful
to be able to use them with the output of git-svn. The git-compatible
format is still available using the new "--git-format" option.
This also fixes a bug in the initial git-svn blame implementation; it was
bombing out on uncommitted local changes.
Signed-off-by: Steven Grimm <koreth@midwinter.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With this, git svn clone -s http://svn.gnome.org/svn/gtk+
is successful.
Also modified the funky rename test for this, which _does_
include escaped '+' signs for HTTP URLs. SVN seems to accept
either "+" or "%2B" in filenames and directories (just not the
main URL), so I'll leave it alone for now.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When having a svn:ignore that ignores the .gitignore file the -f
option to git add must be used to avoid git complaining about adding
an ignored file and hence stop the process of creating .gitignores.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This option adds a From: line (based on the commit's author information)
at the beginning of the body of the commit log message when sending to
svn, if a From: or Signed-off-by: header does not exist.
This, combined with --use-log-author, can retain the author field of commits
through a round trip from git to svn and back.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When using git-cvsimport, the author is inferred from the cvs commit,
e.g. cvs commit logname is foobaruser, then the author field in git
results in:
Author: foobaruser <foobaruser>
Which is not perfect, but perfectly acceptable given the circumstances.
The default git-svn import however, results in:
Author: foobaruser <foobaruser@acf43c95-373e-0410-b603-e72c3f656dc1>
When using mixes of imports, from CVS and SVN into the same git
repository, you'd like to harmonise the imports to the format cvsimport
uses.
git-svn supports an experimental option --use-log-author which currently
results in the same logentry as without that option when no From: or
Signed-off-by: is found in the logentry ($email currently ends up empty,
and hence is generated again).
This patches harmonises the result with cvsimport, and makes
git-svn --use-log-author produce:
Author: foobaruser <foobaruser>
Signed-off-by: Stephen R. van den Berg <srb@cuci.nl>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The command
git svn clone (URL of an empty SVN repo here)
works, creates an empty git repository. I can perform the initial
commit there, but then, "git svn dcommit" says :
Use of uninitialized value in concatenation (.) or string at .../git-svn line 414.
Committing to ...
Unable to determine upstream SVN information from HEAD history
I guess a correct management of the initial commit in git-svn would be
hard to implement, but at least, the error message can be improved.
First step is something like the patch below, and better would be for
"git svn clone" to warn that it won't be able to do much with the
cloned repo.
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-1.5.4:
svn-git: Use binmode for reading/writing binary rev maps
diff options documentation: refer to --diff-filter in --name-status
git-svn bug with blank commits and author file
archive.c: format_subst - fixed bogus argument to memchr
copy.c: copy_fd - correctly report write errors
gitattributes: Fix subdirectory attributes specified from root directory
|
|
Otherwise, there is a possible interaction with UTF-8 locales in
combination with PERL_UNICODE, resulting in "inconsistent size: 40" or
"read:"-type errors.
See also:
perldoc -f binmode
<http://perldoc.perl.org/perl581delta.html#UTF-8-no-longer-default-under-UTF-8-locales>
Signed-off-by: Michael Weber <michaelw@foldr.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When trying to import from svn using an author file, git-svn bails out
if it encounters a blank author. The attached patch changes this
behavior and allow using the author file with blanks authors.
I came across this bug while importing from a cvs2svn repo where the
initial revision (1) has a blank author. This doesn't break the behavior
of bailing out when an unknown author is encountered.
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a user has customized format.pretty in config, git-svn rebase fails with:
Unable to determine upstream SVN information from working tree history
because the command expects to read the commit log in the default format.
This fixes the command to explicitly ask for the format it wants to read
from.
Signed-off-by: Pedro Melo <melo@simplicidade.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When using git-svn to follow only a single (empty) path per
svn-remote (i.e. not using --stdlayout), following the history
of a renamed path was broken in
c586879cdfa4f8181a14e953a9152a4639eef333.
This reverts the regression for the single (emtpy) path per
svn-remote case.
To avoid breaking the tests in a committed revision, this is an
addendum to a patch originally submitted by
Santhosh Kumar Mani <santhoshmani@gmail.com>:
> git-svn: add test for renamed directory fetch
>
> This test tries to fetch a directory which had renames in the
> history from a SVN repository.
[ew: unneccesary dependency on the starting an HTTP server
removed from Santhosh's original test.]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Jonathan Scott Duff wrote:
> Recently I tried "git svn showignore" on my parrot repository and it
> failed. I tracked it down to the prop_walk() sub. When it recurses,
> $path has an extra / on the beginning (i.e., when it recurses, it
> tries to get the props for "//apps" instead of "/apps"). I *think*
> this is because $path is used in the recursive call rather than $p
> (which seems to contain a properly transformed $path). Anyway, I've
> attached a patch that works for me and I think is generally the right
> thing.
Patch-submitted-by: Jonathan Scott Duff
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-svn project names are percent-escaped ever since f5530b8
(git-svn: support for funky branch and project names over HTTP(S),
2007-11-11).
Unfortunately this breaks the scenario where the user hands git-svn an
already-escaped URI. Fix the regexp to skip over what looks like
existing percent escapes, and test this scenario.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Make man page building quiet when DOCBOOK_XSL_172 is defined
git-new-workdir: Share SVN meta data between work dirs and the repository
rev-parse: fix meaning of rev~ vs rev~0.
git-svn: don't blindly append '*' to branch/tags config
|
|
Previously, git-svn would blindly append '*' even if it was specified by
the user during initialization (for certain SVN setups, it is
necessary).
Now, the following command will work correctly:
git svn init -T trunk/docutils \
-t 'tags/*/docutils' \
-b 'branches/*/docutils' \
svn://svn.berlios.de/docutils
Thanks to martin f krafft for the bug report:
> My git-svn target configuration is
>
> [svn-remote "svn"]
> url = svn://svn.berlios.de/docutils
> fetch = trunk/docutils:refs/remotes/trunk
> branches = branches/*/docutils:refs/remotes/*
> tags = tags/*/docutils:refs/remotes/tags/*
>
> Unfortunately, when I run
>
> git-svn init -T trunk/docutils -t 'tags/*/docutils'
> -b 'branches/*/docutils'
>
> then I get (note the two asterisks on the left hand side):
>
> branches = branches/*/docutils/*:refs/remotes/*
> tags = tags/*/docutils/*:refs/remotes/tags/*
>
> I took a brief stab at the code but I can't even figure out where
> the /* is appended, so I defer to you.
>
> It should be trivial to keep git-svn from appending /* if the left
> side already contains an asterisk.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Tested-by: martin f krafft <madduck@madduck.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
git-svn: fix find-rev error message when missing arg
t0021: tr portability fix for Solaris
launch_editor(): allow spaces in the filename
git rebase --abort: always restore the right commit
|
|
Just let the user know that a revision argument is missing instead of
a perl error. This error message mimic the "init" error message, but
could be improved.
Signed-off-by: Marc-Andre Lureau <marcandre.lureau@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
GIT 1.5.4.4
ident.c: reword error message when the user name cannot be determined
Fix dcommit, rebase when rewriteRoot is in use
Really make the LF after reset in fast-import optional
|
|
When the rewriteRoot setting is used with git-svn, it causes the svn
IDs added to commit messages to bear a different URL than is actually
used to retrieve Subversion data.
It is common for Subversion repositories to be available multiple
ways: for instance, HTTP to the public, and svn+ssh to people with
commit access. The need to switch URLs for access is fairly common as
well -- perhaps someone was just given commit access. To switch URLs
without having to rewrite history, one can use the old url as a
rewriteRoot, and use the new one in the svn-remote url setting.
This works well for svn fetching and general git commands.
However, git-svn dcommit, rebase, and perhaps other commands do not
work in this scenario. They scan the svn ID lines in commit messages
and attempt to match them up with url lines in [svn-remote] sections
in the git config.
This patch allows them to match rewriteRoot options, if such options
are present.
Signed-off-by: John Goerzen <jgoerzen@complete.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This command is identical to `git blame', but it shows SVN revision
numbers instead of git commit hashes.
[ew: support "^initial commit" and minor formatting fixes]
Signed-off-by: Tim Stoakes <tim@stoakes.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This way we can avoid the spawning of a new SVN::Ra session by
reusing the existing one.
The most problematic issue is that some svn servers disallow
too many connections from a single IP, so this will allow
git-svn to fetch from those repositories with a higher success
rate by using fewer connections.
This sometimes showed up as a new (and redundant)
[svn-remote "$parent_refname"] entry in $GIT_DIR/svn/.metadata.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Let "git svn" run "git gc --auto" every 1000 imported commits to
reduce the number of loose objects.
To handle the common use case of frequent imports, where each
invocation typically fetches much less than 1000 commits, also run gc
unconditionally at the end of the import.
"1000" is the same number that was used by default when we called
git-repack. It isn't necessarily still the best choice.
Signed-off-by: Karl Hasselström <kha@treskal.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|