Age | Commit message (Collapse) | Author |
|
This patch implements a new "git bisect--helper" builtin plumbing
command that will be used to migrate "git-bisect.sh" to C.
We start by implementing only the "--next-vars" option that will
read bisect refs from "refs/bisect/", and then compute the next
bisect step, and output shell variables ready to be eval'ed by
the shell.
At this step, "git bisect--helper" ignores the paths that may
have been put in "$GIT_DIR/BISECT_NAMES". This will be fixed in a
later patch.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This can be used in GUIs to open installed HTML documentation in the
browser.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/maint-cleanup-after-exec-failure:
git: use run_command() to execute dashed externals
run_command(): help callers distinguish errors
run_command(): handle missing command errors more gracefully
git: s/run_command/run_builtin/
|
|
We used to simply try calling execvp(); if it succeeded, then we were done
and the new program was running. If it didn't, then we knew that it wasn't
a valid command.
Unfortunately, this interacted badly with the new pager handling. Now that
git remains the parent process and the pager is spawned, git has to hang
around until the pager is finished. We install an atexit handler to do
this, but that handler never gets called if we successfully run execvp.
You could see this behavior by running any dashed external using a pager
(e.g., "git -p stash list"). The command finishes running, but the pager
is still going. In the case of less, it then gets an error reading from
the terminal and exits, potentially leaving the terminal in a broken state
(and not showing the output).
This patch just uses run_command() to try running the dashed external. The
parent git process then waits for the external process to complete and
then handles the pager cleanup as it would for an internal command.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is a static function called run_command which
conflicts with the library function in run-command.c; this
isn't a problem currently, but prevents including
run-command.h in git.c.
This patch just renames the static function to something
more specific and non-conflicting.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This simplifies the calling code.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This commit moves the code that computes the dirname of argv[0]
from git.c's main() to git_set_argv0_path() and renames the function
to git_extract_argv0_path(). This makes the code in git.c's main
less cluttered, and we can use the dirname computation from other
main() functions too.
[ spr:
- split Steve's original commit and wrote new commit message.
- Integrated Johannes Schindelin's
cca1704897e7fdb182f68d4c48a437c5d7bc5203 while rebasing onto master.
]
Signed-off-by: Steve Haslam <shaslam@lastminute.com>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* as/autocorrect-alias:
git.c: make autocorrected aliases work
|
|
LF at the end of format strings given to die() is redundant because
die already adds one on its own.
Signed-off-by: Alexander Potashev <aspotashev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
help_unknown_cmd() is able to autocorrect a command to an alias, and not
only to internal or external commands. However, main() was not passing the
autocorrected command through handle_alias(), hence it failed if it was an
alias.
This commit makes the autocorrected command go through handle_alias(), once
handle_internal_command() and execv_dashed_external() have been tried. Since
this is done twice in main() now, moved that logic to a new run_argv()
function.
Also, print the same "Expansion of alias 'x' failed" message when the alias
was autocorrected, rather than a generic "Failed to run command 'x'".
Signed-off-by: Adeodato Simó <dato@net.com.org.es>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is not a good practice to prefer performance over readability in
something as performance uncritical as finding the trailing slash
of argv[0].
So avoid head-scratching by making the loop user-readable, and not
hyper-performance-optimized.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This comes from conversation at the GitTogether where we thought it would
be helpful to be able to teach people to 'stage' files because it tends
to cause confusion when told that they have to keep 'add'ing them.
This continues the movement to start referring to the index as a
staging area (eg: the --staged alias to 'git diff'). Also adds a
doc file for 'git stage' that basically points to the docs for
'git add'.
Signed-off-by: Scott Chacon <schacon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many call sites use strbuf_init(&foo, 0) to initialize local
strbuf variable "foo" which has not been accessed since its
declaration. These can be replaced with a static initialization
using the STRBUF_INIT macro which is just as readable, saves a
function call, and takes up fewer lines.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* jc/alternate-push:
push: receiver end advertises refs from alternate repositories
push: prepare sender to receive extended ref information from the receiver
receive-pack: make it a builtin
is_directory(): a generic helper function
|
|
* maint:
Update release notes for 1.6.0.3
checkout: Do not show local changes when in quiet mode
for-each-ref: Fix --format=%(subject) for log message without newlines
git-stash.sh: don't default to refs/stash if invalid ref supplied
maint: check return of split_cmdline to avoid bad config strings
|
|
As the testcase demonstrates, it's possible for split_cmdline to return -1 and
deallocate any memory it's allocated, if the config string is missing an end
quote. In both the cases below, which are the only calling sites, the return
isn't checked, and using the pointer causes a pretty immediate segfault.
Signed-off-by: Deskin Miller <deskinm@umich.edu>
Acked-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Some places use the standard malloc/strdup without checking if the
allocation was successful; they should use xmalloc/xstrdup that
check the memory allocation result.
Signed-off-by: Dotan Barak <dotanba@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is a good thing to do in general, but more importantly, transport
routines can only be used by built-ins, which is what I'll be adding next.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ar/autospell:
Add help.autocorrect to enable/disable autocorrecting
git wrapper: DWIM mistyped commands
|
|
This patch introduces a modified Damerau-Levenshtein algorithm into
Git's code base, and uses it with the following penalties to show some
similar commands when an unknown command was encountered:
swap = 0, insertion = 1, substitution = 2, deletion = 4
A typical output would now look like this:
$ git sm
git: 'sm' is not a git-command. See 'git --help'.
Did you mean one of these?
am
rm
The cut-off is at similarity rating 6, which was empirically determined
to give sensible results.
As a convenience, if there is only one candidate, Git continues under
the assumption that the user mistyped it. Example:
$ git reabse
WARNING: You called a Git program named 'reabse', which does
not exist.
Continuing under the assumption that you meant 'rebase'
[...]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This fixes "git diff", "git diff-files" and "git diff-index" to work
correctly under worktree setup. Because diff* family works in many modes
and not all of them require worktree, Junio made a nice summary
(with a little modification from me):
* diff-files is about comparing with work tree, so it obviously needs a
work tree;
* diff-index also does, except "diff-index --cached" or "diff --cached TREE"
* no-index is about random files outside git context, so it obviously
doesn't need any work tree;
* comparing two (or more) trees doesn't;
* comparing two blobs doesn't;
* comparing a blob with a random file doesn't;
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit daa0cc9a92c9c2c714aa5f7da6d0ff65b93e0698.
It was a stupid idea to do this; when run as a log-in shell,
it is spawned with argv[0] set to "-git-shell", so the usual
name-based dispatch would not work to begin with.
|
|
This trivially makes "git-shell" a built-in. It makes the executable even
fatter, though.
And MinGW removed git-shell only because of the funny dependencies; there
is no reason to do so anymore.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tested-on-MinGW-by: Johannes Sixt <johannes.sixt@telecom.at>
|
|
We will need the command invocation path in system_path(). This path was
passed to setup_path(), but system_path() can be called earlier, for
example via:
main
commit_pager_choice
setup_pager
git_config
git_etc_gitconfig
system_path
Therefore, we introduce git_set_argv0_path() and call it as soon as
possible.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit c8af1de9cfa0a5678ae766777e0f905e60b69fda.
The change was immensely unpopular, and poeple who would really want to
page can use pager.status configuration.
|
|
* mv/merge-in-c:
reduce_heads(): protect from duplicate input
reduce_heads(): thinkofix
Add a new test for git-merge-resolve
t6021: add a new test for git-merge-resolve
Teach merge.log to "git-merge" again
Build in merge
Fix t7601-merge-pull-config.sh on AIX
git-commit-tree: make it usable from other builtins
Add new test case to ensure git-merge prepends the custom merge message
Add new test case to ensure git-merge reduces octopus parents when possible
Introduce reduce_heads()
Introduce get_merge_bases_many()
Add new test to ensure git-merge handles more than 25 refs.
Introduce get_octopus_merge_bases() in commit.c
git-fmt-merge-msg: make it usable from other builtins
Move read_cache_unmerged() to read-cache.c
Add new test to ensure git-merge handles pull.twohead and pull.octopus
Move parse-options's skip_prefix() to git-compat-util.h
Move commit_list_count() to commit.c
Move split_cmdline() to alias.c
Conflicts:
Makefile
parse-options.c
|
|
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is great debate over whether some commands should set
up a pager automatically. This patch allows individuals to
set their own pager preferences for each command, overriding
the default. For example, to disable the pager for git
status:
git config pager.status false
If "--pager" or "--no-pager" is specified on the command
line, it takes precedence over the config option.
There are two caveats:
- you can turn on the pager for plumbing commands.
Combined with "core.pager = always", this will probably
break a lot of things. Don't do it.
- This only works for builtin commands. The reason is
somewhat complex:
Calling git_config before we do setup_git_directory
has bad side effects, because it wants to know where
the git_dir is to find ".git/config". Unfortunately,
we cannot call setup_git_directory indiscriminately,
because some builtins (like "init") break if we do.
For builtins, this is OK, since we can just wait until
after we call setup_git_directory. But for aliases, we
don't know until we expand (recursively) which command
we're doing. This should not be a huge problem for
aliases, which can simply use "--pager" or "--no-pager"
in the alias as appropriate.
For external commands, however, we don't know we even
have an external command until we exec it, and by then
it is too late to check the config.
An alternative approach would be to have a config mode
where we don't bother looking at .git/config, but only
at the user and system config files. This would make the
behavior consistent across builtins, aliases, and
external commands, at the cost of not allowing per-repo
pager config for at all.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* j6t/mingw: (38 commits)
compat/pread.c: Add a forward declaration to fix a warning
Windows: Fix ntohl() related warnings about printf formatting
Windows: TMP and TEMP environment variables specify a temporary directory.
Windows: Make 'git help -a' work.
Windows: Work around an oddity when a pipe with no reader is written to.
Windows: Make the pager work.
When installing, be prepared that template_dir may be relative.
Windows: Use a relative default template_dir and ETC_GITCONFIG
Windows: Compute the fallback for exec_path from the program invocation.
Turn builtin_exec_path into a function.
Windows: Use a customized struct stat that also has the st_blocks member.
Windows: Add a custom implementation for utime().
Windows: Add a new lstat and fstat implementation based on Win32 API.
Windows: Implement a custom spawnve().
Windows: Implement wrappers for gethostbyname(), socket(), and connect().
Windows: Work around incompatible sort and find.
Windows: Implement asynchronous functions as threads.
Windows: Disambiguate DOS style paths from SSH URLs.
Windows: A rudimentary poll() emulation.
Windows: Implement start_command().
...
|
|
split_cmdline() is currently used for aliases only, but later it can be
useful for other builtins as well. Move it to alias.c for now,
indicating that originally it's for aliases, but we'll have it in libgit
this way.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, execv_git_cmd() always try running the dashed form, which
means we cannot easily remove the git-foo hardlinks for built-in
commands. This updates the function to always exec "git foo" form, and
makes sure "git" potty does not infinitely recurse to itself.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before we can successfully parse a builtin command from the program name
we must strip off unneeded parts, that is, the file extension.
Furthermore, we must take Windows style path names into account when we
parse the program name.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
|
|
Attributes can be specified at three different places: the internal
table of default values, the file $GIT_DIR/info/attributes and files
named .gitattributes in the work tree. Since bare repositories don't
have a work tree, git should ignore any .gitattributes files there.
This patch makes git do that, so the only way left for a user to specify
attributes in a bare repository is the file info/attributes (in addition
to changing the defaults and recompiling).
In addition, git-check-attr is now allowed to run without a work tree.
Like any user of the code in attr.c, it ignores the .gitattributes files
when run in a bare repository. It can still read from info/attributes.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git's main usage pages did not show "git help" as a way to get more
information on a specific subcommand. This patch adds an info line after
the list of git commands currently printed by "git", "git help", "git
--help" and "git help --all".
Signed-off-by: Teemu Likonen <tlikonen@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/diff-no-no-index:
git diff --no-index: default to page like other diff frontends
git-diff: allow --no-index semantics a bit more
"git diff": do not ignore index without --no-index
diff-files: do not play --no-index games
tests: do not use implicit "git diff --no-index"
|
|
Being able to say "git diff A B" outside a git repository and getting a
colourful version of "diff -u A B" may be nice, but such a cute hack
should not give bogus results to scripts that want to give two paths,
either or both of which happen to have been removed from the work tree,
to "git diff-files".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Thanks to Johannes Schindelin for various comments and improvements,
including supporting cloning full bundles.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
make git status act similar to git log and git diff by presenting long
output in a pager.
Signed-off-by: Bart Trojanowski <bart@jukie.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
af05d67 (Always set *nongit_ok in setup_git_directory_gently(),
2008-03-25) had a change from the patch originally submitted that resulted
in disabling aliases outside a git repository.
It turns out that some people used "alias.fubar = diff --color-words" in
$HOME/.gitconfig to use non-index diff (or any command that do not need
git repository) outside git repositories, and this change broke them,
so this resurrects the support for such usage.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
setup_git_directory_gently() only modified the value of its *nongit_ok
argument if we were not in a git repository. Now it will always set it
to 0 when we are inside a repository.
Also remove now unnecessary initializations in the callers of this
function.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Once upon a time shortlog could be run from a non-git directory
and still do its job. Fix this regression and add a small test
for it.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* db/checkout: (21 commits)
checkout: error out when index is unmerged even with -m
checkout: show progress when checkout takes long time while switching branches
Add merge-subtree back
checkout: updates to tracking report
builtin-checkout.c: Remove unused prefix arguments in switch_branches path
checkout: work from a subdirectory
checkout: tone down the "forked status" diagnostic messages
Clean up reporting differences on branch switch
builtin-checkout.c: fix possible usage segfault
checkout: notice when the switched branch is behind or forked
Build in checkout
Move code to clean up after a branch change to branch.c
Library function to check for unmerged index entries
Use diff -u instead of diff in t7201
Move create_branch into a library file
Build-in merge-recursive
Add "skip_unmerged" option to unpack_trees.
Discard "deleted" cache entries after using them to update the working tree
Send unpack-trees debugging output to stderr
Add flag to make unpack_trees() not print errors.
...
Conflicts:
Makefile
|
|
This converts git_config_alias to the public alias_lookup
function. Because of the nature of our config parser, we
still have to rely on setting static data. However, that
interface is wrapped so that you can just say
value = alias_lookup(key);
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An earlier commit e1b3a2c (Build-in merge-recursive) made the
subtree merge strategy backend unavailable. This resurrects
it.
A new test t6029 currently only tests the strategy is available,
but it should be enhanced to check the real "subtree" case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The only differences in behavior should be:
- git checkout -m with non-trivial merging won't print out
merge-recursive messages (see the change in t7201-co.sh)
- git checkout -- paths... will give a sensible error message if
HEAD is invalid as a commit.
- some intermediate states which were written to disk in the shell
version (in particular, index states) are only kept in memory in
this version, and therefore these can no longer be revealed by
later write operations becoming impossible.
- when we change branches, we discard MERGE_MSG, SQUASH_MSG, and
rr-cache/MERGE_RR, like reset always has.
I'm not 100% sure I got the merge recursive setup exactly right; the
base for a non-trivial merge in the shell code doesn't seem
theoretically justified to me, but I tried to match it anyway, and the
tests all pass this way.
Other than these items, the results should be identical to the shell
version, so far as I can tell.
[jc: squashed lock-file fix from Dscho in]
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
alias.* configuration expects a string value
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This makes write_tree_from_memory(), which writes the active cache as
a tree and returns the struct tree for it, available to other code. It
also makes available merge_trees(), which does the internal merge of
two trees with a known base, and merge_recursive(), which does the
recursive internal merge of two commits with a list of common
ancestors.
The first two of these will be used by checkout -m, and the third is
presumably useful in general, although the implementation of checkout
-m which entirely matches the behavior of the shell version does not
use it (since it ignores the difference of ancestry between the old
branch and the new branch).
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
|
|
* kh/commit: (33 commits)
git-commit --allow-empty
git-commit: Allow to amend a merge commit that does not change the tree
quote_path: fix collapsing of relative paths
Make git status usage say git status instead of git commit
Fix --signoff in builtin-commit differently.
git-commit: clean up die messages
Do not generate full commit log message if it is not going to be used
Remove git-status from list of scripts as it is builtin
Fix off-by-one error when truncating the diff out of the commit message.
builtin-commit.c: export GIT_INDEX_FILE for launch_editor as well.
Add a few more tests for git-commit
builtin-commit: Include the diff in the commit message when verbose.
builtin-commit: fix partial-commit support
Fix add_files_to_cache() to take pathspec, not user specified list of files
Export three helper functions from ls-files
builtin-commit: run commit-msg hook with correct message file
builtin-commit: do not color status output shown in the message template
file_exists(): dangling symlinks do exist
Replace "runstatus" with "status" in the tests
t7501-commit: Add test for git commit <file> with dirty index.
...
|