| Age | Commit message (Collapse) | Author |
|---|
|
Plug the memory leaks from the trickiest API of all, the revision
walker.
* ab/plug-leak-in-revisions: (27 commits)
revisions API: add a TODO for diff_free(&revs->diffopt)
revisions API: have release_revisions() release "topo_walk_info"
revisions API: have release_revisions() release "date_mode"
revisions API: call diff_free(&revs->pruning) in revisions_release()
revisions API: release "reflog_info" in release revisions()
revisions API: clear "boundary_commits" in release_revisions()
revisions API: have release_revisions() release "prune_data"
revisions API: have release_revisions() release "grep_filter"
revisions API: have release_revisions() release "filter"
revisions API: have release_revisions() release "cmdline"
revisions API: have release_revisions() release "mailmap"
revisions API: have release_revisions() release "commits"
revisions API users: use release_revisions() for "prune_data" users
revisions API users: use release_revisions() with UNLEAK()
revisions API users: use release_revisions() in builtin/log.c
revisions API users: use release_revisions() in http-push.c
revisions API users: add "goto cleanup" for release_revisions()
stash: always have the owner of "stash_info" free it
revisions API users: use release_revisions() needing REV_INFO_INIT
revision.[ch]: document and move code declared around "init"
...
|
|
Introduce and apply coccinelle rule to discourage an explicit
comparison between a pointer and NULL, and applies the clean-up to
the maintenance track.
* ep/maint-equals-null-cocci:
tree-wide: apply equals-null.cocci
tree-wide: apply equals-null.cocci
contrib/coccinnelle: add equals-null.cocci
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a release_revisions() to various users of "struct rev_list" in
those straightforward cases where we only need to add the
release_revisions() call to the end of a block, and don't need to
e.g. refactor anything to use a "goto cleanup" pattern.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Follow-up on the introduction of string_list_init_nodup() and
string_list_init_dup() in the series merged in bd4232fac33 (Merge
branch 'ab/struct-init', 2021-07-16) and convert code that implicitly
relied on xcalloc() being equivalent to the initializer to use
xmalloc() and string_list_init_{no,}dup() instead.
In the case of get_unmerged() in merge-recursive.c we used the
combination of xcalloc() and assigning "1" to "strdup_strings" to get
what we'd get via string_list_init_dup(), let's use that instead.
Adjacent code in cmd_format_patch() will be changed in a subsequent
commit, since we're changing that let's change the other in-tree
patterns that do the same. Let's also convert a "x == NULL" to "!x"
per our CodingGuidelines, as we need to change the "if" line anyway.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Object-file API shuffling.
* ab/object-file-api-updates:
object-file API: pass an enum to read_object_with_reference()
object-file.c: add a literal version of write_object_file_prepare()
object-file API: have hash_object_file() take "enum object_type"
object API: rename hash_object_file_literally() to write_*()
object-file API: split up and simplify check_object_signature()
object API users + docs: check <0, not !0 with check_object_signature()
object API docs: move check_object_signature() docs to cache.h
object API: correct "buf" v.s. "map" mismatch in *.c and *.h
object-file API: have write_object_file() take "enum object_type"
object-file API: add a format_object_header() function
object-file API: return "void", not "int" from hash_object_file()
object-file.c: split up declaration of unrelated variables
|
|
Change the write_object_file() function to take an "enum object_type"
instead of a "const char *type". Its callers either passed
{commit,tree,blob,tag}_type and can pass the corresponding OBJ_* type
instead, or were hardcoding strings like "blob".
This avoids the back & forth fragility where the callers of
write_object_file() would have the enum type, and convert it
themselves via type_name(). We do have to now do that conversion
ourselves before calling write_object_file_prepare(), but those
codepaths will be similarly adjusted in subsequent commits.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When users run
git show --remerge-diff $MERGE_COMMIT
or
git log -p --remerge-diff ...
stdout is not an appropriate location to dump conflict messages, but we
do want to provide them to users. We will include them in the diff
headers instead...but for that to work, we need for any multiline
messages to replace newlines with both a newline and a space. Add a new
flag to signal when we want these messages modified in such a fashion,
and use it in path_msg() to modify these messages this way. Also, allow
a special prefix to be specified for these headers.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since some callers may want to send warning messages to somewhere other
than stdout/stderr, stop printing "warning: Cannot merge binary files"
from ll-merge and instead modify the return status of ll_merge() to
indicate when a merge of binary files has occurred. Message printing
probably does not belong in a "low-level merge" anyway.
This commit continues printing the message as-is, just from the callers
instead of within ll_merge(). Future changes will start handling the
message differently in the merge-ort codepath.
There was one special case here: the callers in rerere.c do NOT check
for and print such a message; since those code paths explicitly skip
over binary files, there is no reason to check for a return status of
LL_MERGE_BINARY_CONFLICT or print the related message.
Note that my methodology included first modifying ll_merge() to return
a struct, so that the compiler would catch all the callers for me and
ensure I had modified all of them. After modifying all of them, I then
changed the struct to an enum.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Follow through the work to use the repo interface to access
submodule objects in-process, instead of abusing the alternate
object database interface.
* jt/no-abuse-alternate-odb-for-submodules:
submodule: trace adding submodule ODB as alternate
submodule: pass repo to check_has_commit()
object-file: only register submodule ODB if needed
merge-{ort,recursive}: remove add_submodule_odb()
refs: peeling non-the_repository iterators is BUG
refs: teach arbitrary repo support to iterators
refs: plumb repo into ref stores
|
|
Various fixes in code paths that move untracked files away to make room.
* en/removing-untracked-fixes:
Documentation: call out commands that nuke untracked files/directories
Comment important codepaths regarding nuking untracked files/dirs
unpack-trees: avoid nuking untracked dir in way of locally deleted file
unpack-trees: avoid nuking untracked dir in way of unmerged file
Change unpack_trees' 'reset' flag into an enum
Remove ignored files by default when they are in the way
unpack-trees: make dir an internal-only struct
unpack-trees: introduce preserve_ignored to unpack_trees_options
read-tree, merge-recursive: overwrite ignored files by default
checkout, read-tree: fix leak of unpack_trees_options.dir
t2500: add various tests for nuking untracked files
|
|
After the parent commit and some of its ancestors, the only place
commits are being accessed through alternates is in the user-facing
message formatting code. Fix those, and remove the add_submodule_odb()
calls.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
More code paths that use the hack to add submodule's object
database to the set of alternate object store have been cleaned up.
* jt/add-submodule-odb-clean-up:
revision: remove "submodule" from opt struct
repository: support unabsorbed in repo_submodule_init
submodule: remove unnecessary unabsorbed fallback
|
|
Currently, every caller of unpack_trees() that wants to ensure ignored
files are overwritten by default needs to:
* allocate unpack_trees_options.dir
* flip the DIR_SHOW_IGNORED flag in unpack_trees_options.dir->flags
* call setup_standard_excludes
AND then after the call to unpack_trees() needs to
* call dir_clear()
* deallocate unpack_trees_options.dir
That's a fair amount of boilerplate, and every caller uses identical
code. Make this easier by instead introducing a new boolean value where
the default value (0) does what we want so that new callers of
unpack_trees() automatically get the appropriate behavior. And move all
the handling of unpack_trees_options.dir into unpack_trees() itself.
While preserve_ignored = 0 is the behavior we feel is the appropriate
default, we defer fixing commands to use the appropriate default until a
later commit. So, this commit introduces several locations where we
manually set preserve_ignored=1. This makes it clear where code paths
were previously preserving ignored files when they should not have been;
a future commit will flip these to instead use a value of 0 to get the
behavior we want.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This fixes a long-standing patchwork of ignored files handling in
read-tree and merge-recursive, called out and suggested by Junio long
ago. Quoting from commit dcf0c16ef1 ("core.excludesfile clean-up"
2007-11-16):
git-read-tree takes --exclude-per-directory=<gitignore>,
not because the flexibility was needed. Again, this was
because the option predates the standardization of the ignore
files.
...
On the other hand, I think it makes perfect sense to fix
git-read-tree, git-merge-recursive and git-clean to follow the
same rule as other commands. I do not think of a valid use case
to give an exclude-per-directory that is nonstandard to
read-tree command, outside a "negative" test in the t1004 test
script.
This patch is the first step to untangle this mess.
The next step would be to teach read-tree, merge-recursive and
clean (in C) to use setup_standard_excludes().
History shows each of these were partially or fully fixed:
* clean was taught the new trick in 1617adc7a0 ("Teach git clean to
use setup_standard_excludes()", 2007-11-14).
* read-tree was primarily used by checkout & merge scripts. checkout
and merge later became builtins and were both fixed to use the new
setup_standard_excludes() handling in fc001b526c ("checkout,merge:
loosen overwriting untracked file check based on info/exclude",
2011-11-27). So the primary users were fixed, though read-tree
itself was not.
* merge-recursive has now been replaced as the default merge backend
by merge-ort. merge-ort fixed this by using
setup_standard_excludes() starting early in its implementation; see
commit 6681ce5cf6 ("merge-ort: add implementation of checkout()",
2020-12-13), largely due to its design depending on checkout() and
thus being influenced by the checkout code. However,
merge-recursive itself was not fixed here, in part because its
design meant it had difficulty differentiating between untracked
files, ignored files, leftover tracked files that haven't been
removed yet due to order of processing files, and files written by
itself due to collisions).
Make the conversion more complete by now handling read-tree and
handling at least the unpack_trees() portion of merge-recursive. While
merge-recursive is on its way out, fixing the unpack_trees() portion is
easy and facilitates some of the later changes in this series. Note
that fixing read-tree makes the --exclude-per-directory option to
read-tree useless, so we remove it from the documentation (though we
continue to accept it if passed).
The read-tree changes happen to fix a bug in t1013.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
jt/no-abuse-alternate-odb-for-submodules
* jt/add-submodule-odb-clean-up:
revision: remove "submodule" from opt struct
repository: support unabsorbed in repo_submodule_init
submodule: remove unnecessary unabsorbed fallback
|
|
Various mergy operations have been prepared to work efficiently
with the sparse index.
* ds/mergies-with-sparse-index:
sparse-index: integrate with cherry-pick and rebase
sequencer: ensure full index if not ORT strategy
t1092: add cherry-pick, rebase tests
merge-ort: expand only for out-of-cone conflicts
merge: make sparse-aware with ORT
diff: ignore sparse paths in diffstat
|
|
Allow 'git merge' to operate without expanding a sparse index, at least
not immediately. The index still will be expanded in a few cases:
1. If the merge strategy is 'recursive', then we enable
command_requires_full_index at the start of the merge_recursive()
method. We expect sparse-index users to also have the 'ort' strategy
enabled.
2. With the 'ort' strategy, if the merge results in a conflicted file,
then we expand the index before updating the working tree. The loop
that iterates over the worktree replaces index entries and tracks
'origintal_cache_nr' which can become completely wrong if the index
expands in the middle of the operation. This safety valve is
important before that loop starts. A later change will focus this
to only expand if we indeed have a conflict outside of the
sparse-checkout cone.
3. Other merge strategies are executed as a 'git merge-X' subcommand,
and those strategies are currently protected with the
'command_requires_full_index' guard.
Some test updates are required, including a mistaken 'git checkout -b'
that did not specify the base branch, causing merges to be fast-forward
merges.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Clean up a TODO in revision.h by removing the "submodule" field from
struct setup_revision_opt. This field is only used to specify the ref
store to use, so use rev_info->repo to determine the ref store instead.
The only users of this field are merge-ort.c and merge-recursive.c.
However, both these files specify the superproject as rev_info->repo and
the submodule as setup_revision_opt->submodule. In order to be able to
pass the submodule as rev_info->repo, all commits must be parsed with
the submodule explicitly specified; this patch does that as well. (An
incremental solution in which only some commits are parsed with explicit
submodule will not work, because if the same commit is parsed twice in
different repositories, there will be 2 heap-allocated object structs
corresponding to that commit, and any flag set by the revision walking
mechanism on one of them will not be reflected onto the other.)
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Call fspathcmp() instead of open-coding it. This shortens the code and
makes it less repetitive.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
cf2dc1c238 (speed up alt_odb_usable() with many alternates, 2021-07-07)
introduced the function fspathhash() for calculating path hashes while
respecting the configuration option core.ignorecase. Call it instead of
open-coding it; the resulting code is shorter and less repetitive.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Documentation on "git diff -l<n>" and diff.renameLimit have been
updated, and the defaults for these limits have been raised.
* en/rename-limits-doc:
rename: bump limit defaults yet again
diffcore-rename: treat a rename_limit of 0 as unlimited
doc: clarify documentation for rename/copy limits
diff: correct warning message when renameLimit exceeded
|
|
Many "printf"-like helper functions we have have been annotated
with __attribute__() to catch placeholder/parameter mismatches.
* ab/attribute-format:
advice.h: add missing __attribute__((format)) & fix usage
*.h: add a few missing __attribute__((format))
*.c static functions: add missing __attribute__((format))
sequencer.c: move static function to avoid forward decl
*.c static functions: don't forward-declare __attribute__
|
|
Code cleanup around struct_type_init() functions.
* ab/struct-init:
string-list.h users: change to use *_{nodup,dup}()
string-list.[ch]: add a string_list_init_{nodup,dup}()
dir.[ch]: replace dir_init() with DIR_INIT
*.c *_init(): define in terms of corresponding *_INIT macro
*.h: move some *_INIT to designated initializers
|
|
The merge code had funny interactions between content based rename
detection and directory rename detection.
* en/merge-dir-rename-corner-case-fix:
merge-recursive: handle rename-to-self case
merge-ort: ensure we consult df_conflict and path_conflicts
t6423: test directory renames causing rename-to-self
|
|
These were last bumped in commit 92c57e5c1d29 (bump rename limit
defaults (again), 2011-02-19), and were bumped both because processors
had gotten faster, and because people were getting ugly merges that
caused problems and reporting it to the mailing list (suggesting that
folks were willing to spend more time waiting).
Since that time:
* Linus has continued recommending kernel folks to set
diff.renameLimit=0 (maps to 32767, currently)
* Folks with repositories with lots of renames were happy to set
merge.renameLimit above 32767, once the code supported that, to
get correct cherry-picks
* Processors have gotten faster
* It has been discovered that the timing methodology used last time
probably used too large example files.
The last point is probably worth explaining a bit more:
* The "average" file size used appears to have been average blob size
in the linux kernel history at the time (probably v2.6.25 or
something close to it).
* Since bigger files are modified more frequently, such a computation
weights towards larger files.
* Larger files may be more likely to be modified over time, but are
not more likely to be renamed -- the mean and median blob size
within a tree are a bit higher than the mean and median of blob
sizes in the history leading up to that version for the linux
kernel.
* The mean blob size in v2.6.25 was half the average blob size in
history leading to that point
* The median blob size in v2.6.25 was about 40% of the mean blob size
in v2.6.25.
* Since the mean blob size is more than double the median blob size,
any file as big as the mean will not be compared to any files of
median size or less (because they'd be more than 50% dissimilar).
* Since it is the number of files compared that provides the O(n^2)
behavior, median-sized files should matter more than mean-sized
ones.
The combined effect of the above is that the file size used in past
calculations was likely about 5x too large. Combine that with a CPU
performance improvement of ~30%, and we can increase the limits by
a factor of sqrt(5/(1-.3)) = 2.67, while keeping the original stated
time limits.
Keeping the same approximate time limit probably makes sense for
diff.renameLimit (there is no progress feedback in e.g. git log -p),
but the experience above suggests merge.renameLimit could be extended
significantly. In fact, it probably would make sense to have an
unlimited default setting for merge.renameLimit, but that would
likely need to be coupled with changes to how progress is displayed.
(See https://lore.kernel.org/git/YOx+Ok%2FEYvLqRMzJ@coredump.intra.peff.net/
for details in that area.) For now, let's just bump the approximate
time limit from 10s to 1m.
(Note: We do not want to use actual time limits, because getting results
that depend on how loaded your system is that day feels bad, and because
we don't discover that we won't get all the renames until after we've
put in a lot of work rather than just upfront telling the user there are
too many files involved.)
Using the original time limit of 2s for diff.renameLimit, and bumping
merge.renameLimit from 10s to 60s, I found the following timings using
the simple script at the end of this commit message (on an AWS c5.xlarge
which reports as "Intel(R) Xeon(R) Platinum 8124M CPU @ 3.00GHz"):
N Timing
1300 1.995s
7100 59.973s
So let's round down to nice even numbers and bump the limits from
400->1000, and from 1000->7000.
Here is the measure_rename_perf script (adapted from
https://lore.kernel.org/git/20080211113516.GB6344@coredump.intra.peff.net/
in particular to avoid triggering the linear handling from
basename-guided rename detection):
#!/bin/bash
n=$1; shift
rm -rf repo
mkdir repo && cd repo
git init -q -b main
mkdata() {
mkdir $1
for i in `seq 1 $2`; do
(sed "s/^/$i /" <../sample
echo tag: $1
) >$1/$i
done
}
mkdata initial $n
git add .
git commit -q -m initial
mkdata new $n
git add .
cd new
for i in *; do git mv $i $i.renamed; done
cd ..
git rm -q -rf initial
git commit -q -m new
time git diff-tree -M -l0 --summary HEAD^ HEAD
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add missing __attribute__((format)) function attributes to various
"static" functions that take printf arguments.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change all in-tree users of the string_list_init(LIST, BOOL) API to
use string_list_init_{nodup,dup}(LIST) instead.
As noted in the preceding commit let's leave the now-unused
string_list_init() wrapper in-place for any in-flight users, it can be
removed at some later date.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Directory rename detection can cause transitive renames, e.g. if the two
different sides of history each do one half of:
A/file -> B/file
B/ -> C/
then directory rename detection transitively renames to give us
A/file -> C/file
However, when C/ == A/, note that this gives us
A/file -> A/file.
merge-recursive assumed that any rename D -> E would have D != E. While
that is almost always true, the above is a special case where it is not.
So we cannot do things like delete the rename source, we cannot assume
that a file existing at path E implies a rename/add conflict and we have
to be careful about what stages end up in the output.
This change feels a bit hackish. It took me surprisingly many hours to
find, and given merge-recursive's design causing it to attempt to
enumerate all combinations of edge and corner cases with special code
for each combination, I'm worried there are other similar fixes needed
elsewhere if we can just come up with the right special testcase.
Perhaps an audit would rule it out, but I have not the energy.
merge-recursive deserves to die, and since it is on its way out anyway,
fixing this particular bug narrowly will have to be good enough.
Reported-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix typos in documentation, code comments, and RelNotes which repeat
various words. In trivial cases, just delete the duplicated word and
rewrap text, if needed. Reword the affected sentence in
Documentation/RelNotes/1.8.4.txt for it to make sense.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A few variants of informational message "Already up-to-date" has
been rephrased.
* js/merge-already-up-to-date-message-reword:
merge: fix swapped "up to date" message components
merge(s): apply consistent punctuation to "up to date" messages
|
|
SHA-256 transition.
* bc/hash-transition-interop-part-1:
hex: print objects using the hash algorithm member
hex: default to the_hash_algo on zero algorithm value
builtin/pack-objects: avoid using struct object_id for pack hash
commit-graph: don't store file hashes as struct object_id
builtin/show-index: set the algorithm for object IDs
hash: provide per-algorithm null OIDs
hash: set, copy, and use algo field in struct object_id
builtin/pack-redundant: avoid casting buffers to struct object_id
Use the final_oid_fn to finalize hashing of object IDs
hash: add a function to finalize object IDs
http-push: set algorithm when reading object ID
Always use oidread to read into struct object_id
hash: add an algo member to struct object_id
|
|
Although the various "Already up to date" messages resulting from merge
attempts share identical phrasing, they use a mix of punctuation ranging
from "." to "!" and even "Yeeah!", which leads to extra work for
translators. Ease the job of translators by settling upon "." as
punctuation for all such messages.
While at it, take advantage of printf_ln() to further ease the
translation task so translators need not worry about line termination,
and fix a case of missing line termination in the (unused)
merge_ort_nonrecursive() function.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Builds on top of the sparse-index infrastructure to mark operations
that are not ready to mark with the sparse index, causing them to
fall back on fully-populated index that they always have worked with.
* ds/sparse-index-protections: (47 commits)
name-hash: use expand_to_path()
sparse-index: expand_to_path()
name-hash: don't add directories to name_hash
revision: ensure full index
resolve-undo: ensure full index
read-cache: ensure full index
pathspec: ensure full index
merge-recursive: ensure full index
entry: ensure full index
dir: ensure full index
update-index: ensure full index
stash: ensure full index
rm: ensure full index
merge-index: ensure full index
ls-files: ensure full index
grep: ensure full index
fsck: ensure full index
difftool: ensure full index
commit: ensure full index
checkout: ensure full index
...
|
|
Up until recently, object IDs did not have an algorithm member, only a
hash. Consequently, it was possible to share one null (all-zeros)
object ID among all hash algorithms. Now that we're going to be
handling objects from multiple hash algorithms, it's important to make
sure that all object IDs have a correct algorithm field.
Introduce a per-algorithm null OID, and add it to struct hash_algo.
Introduce a wrapper function as well, and use it everywhere we used to
use the null_oid constant.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Plug the ort merge backend throughout the rest of the system, and
start testing it as a replacement for the recursive backend.
* en/ort-readiness:
Add testing with merge-ort merge strategy
t6423: mark remaining expected failure under merge-ort as such
Revert "merge-ort: ignore the directory rename split conflict for now"
merge-recursive: add a bunch of FIXME comments documenting known bugs
merge-ort: write $GIT_DIR/AUTO_MERGE whenever we hit a conflict
t: mark several submodule merging tests as fixed under merge-ort
merge-ort: implement CE_SKIP_WORKTREE handling with conflicted entries
t6428: new test for SKIP_WORKTREE handling and conflicts
merge-ort: support subtree shifting
merge-ort: let renormalization change modify/delete into clean delete
merge-ort: have ll_merge() use a special attr_index for renormalization
merge-ort: add a special minimal index just for renormalization
merge-ort: use STABLE_QSORT instead of QSORT where required
|
|
Before iterating over all cache entries, ensure that a sparse index is
expanded to a full index to avoid unexpected behavior.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Several methods specify that they take a 'struct index_state' pointer
with the 'const' qualifier because they intend to only query the data,
not change it. However, we will be introducing a step very low in the
method stack that might modify a sparse-index to become a full index in
the case that our queries venture inside a sparse-directory entry.
This change only removes the 'const' qualifiers that are necessary for
the following change which will actually modify the implementation of
index_name_stage_pos().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code simplification by removing support for a caller that is long gone.
* ab/read-tree:
tree.h API: simplify read_tree_recursive() signature
tree.h API: expose read_tree_1() as read_tree_at()
archive: stop passing "stage" through read_tree_recursive()
ls-files: refactor away read_tree()
ls-files: don't needlessly pass around stage variable
tree.c API: move read_tree() into builtin/ls-files.c
ls-files tests: add meaningful --with-tree tests
show tests: add test for "git show <tree>"
|
|
Simplify the signature of read_tree_recursive() to omit the "base",
"baselen" and "stage" arguments. No callers of it use these parameters
for anything anymore.
The last function to call read_tree_recursive() with a non-"" path was
read_tree_recursive() itself, but that was changed in
ffd31f661d5 (Reimplement read_tree_recursive() using
tree_entry_interesting(), 2011-03-25).
The last user of the "stage" parameter went away in the last commit,
and even that use was mere boilerplate.
So let's remove those and rename the read_tree_recursive() function to
just read_tree(). We had another read_tree() function that I've
refactored away in preceding commits, since all in-tree users read
trees recursively with a callback we can change the name to signify
that this is the norm.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The plan is to just delete merge-recursive, but not until everyone is
comfortable with merge-ort as a replacement. Given that I haven't
switched all callers of merge-recursive over yet (e.g. git-am still uses
merge-recursive), maybe there's some value documenting known bugs in the
algorithm in case we end up keeping it or someone wants to dig it up in
the future.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
hashmap_free(), hashmap_free_entries(), and hashmap_free_() have existed
for a while, but aren't necessarily the clearest names, especially with
hashmap_partial_clear() being added to the mix and lazy-initialization
now being supported. Peff suggested we adopt the following names[1]:
- hashmap_clear() - remove all entries and de-allocate any
hashmap-specific data, but be ready for reuse
- hashmap_clear_and_free() - ditto, but free the entries themselves
- hashmap_partial_clear() - remove all entries but don't deallocate
table
- hashmap_partial_clear_and_free() - ditto, but free the entries
This patch provides the new names and converts all existing callers over
to the new naming scheme.
[1] https://lore.kernel.org/git/20201030125059.GA3277724@coredump.intra.peff.net/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All "mergy" operations that internally use the merge-recursive
machinery should honor the merge.renormalize configuration, but
many of them didn't.
* en/eol-attrs-gotchas:
checkout: support renormalization with checkout -m <paths>
merge: make merge.renormalize work for all uses of merge machinery
t6038: remove problematic test
t6038: make tests fail for the right reason
|
|
The 'merge' command is not the only one that does merges; other commands
like checkout -m or rebase do as well. Unfortunately, the only area of
the code that checked for the "merge.renormalize" config setting was in
builtin/merge.c, meaning it could only affect merges performed by the
"merge" command. Move the handling of this config setting to
merge_recursive_config() so that other commands can benefit from it as
well. Fixes a few tests in t6038.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commits 7c0a6c8e47 ("merge-recursive: move some definitions around to
clean up the header", 2019-08-17), and b4db8a2b76 ("merge-recursive:
remove useless parameter in merge_trees()", 2019-08-17) added some
useful documentation to the functions, but had a few places where the
new comments were unclear or even misleading. Fix those comments.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With a rename/rename(1to2) conflict, we attempt to do a three-way merge
of the file contents, so that the correct contents can be placed in the
working tree at both paths. If the file is a binary, however, no
content merging is possible and we should just use the original version
of the file at each of the paths.
Reported-by: Chunlin Zhang <zhangchunlin@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are a variety of situations where a filter process can make use of
some additional metadata. For example, some people find the ident
filter too limiting and would like to include the commit or the branch
in their smudged files. This information isn't available during
checkout as HEAD hasn't been updated at that point, and it wouldn't be
available in archives either.
Let's add a way to pass this metadata down to the filter. We pass the
blob we're operating on, the treeish (preferring the commit over the
tree if one exists), and the ref we're operating on. Note that we won't
pass this information in all cases, such as when renormalizing or when
we're performing diffs, since it doesn't make sense in those cases.
The data we currently get from the filter process looks like the
following:
command=smudge
pathname=git.c
0000
With this change, we'll get data more like this:
command=smudge
pathname=git.c
refname=refs/tags/v2.25.1
treeish=c522f061d551c9bb8684a7c3859b2ece4499b56b
blob=7be7ad34bd053884ec48923706e70c81719a8660
0000
There are a couple things to note about this approach. For operations
like checkout, treeish will always be a commit, since we cannot check
out individual trees, but for other operations, like archive, we can end
up operating on only a particular tree, so we'll provide only a tree as
the treeish. Similar comments apply for refname, since there are a
variety of cases in which we won't have a ref.
This commit wires up the code to print this information, but doesn't
pass any of it at this point. In a future commit, we'll have various
code paths pass the actual useful data down.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Handling of conflicting renames in merge-recursive have further
been made consistent with how existing codepaths try to mimic what
is done to add/add conflicts.
* en/merge-path-collision:
merge-recursive: apply collision handling unification to recursive case
|
