Age | Commit message (Collapse) | Author |
|
Expanding '%n' and '%xNN' is generic functionality, so extract that from
the pretty.c formatter into a callback that can be reused.
No functional change intended
Signed-off-by: Anders Waldenborg <anders@0x63.nu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With the new "key=" option to %(trailers) it often makes little sense to
show the key, as it by definition already is knows which trailer is
printed there. This new "valueonly" option makes it omit the key when
printing trailers.
E.g.:
$ git show -s --pretty='%s%n%(trailers:key=Signed-off-by,valueonly)' aaaa88182
will show:
> upload-pack: fix broken if/else chain in config callback
> Jeff King <peff@peff.net>
> Junio C Hamano <gitster@pobox.com>
Signed-off-by: Anders Waldenborg <anders@0x63.nu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Adds a new "key=X" option to "%(trailers)" which will cause it to only
print trailer lines which match any of the specified keys.
Signed-off-by: Anders Waldenborg <anders@0x63.nu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
No functional change intended.
This change may not seem useful on its own, but upcoming commits will do
memory allocation in there, and a single return path makes deallocation
easier.
Signed-off-by: Anders Waldenborg <anders@0x63.nu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In addition to old %(trailers:only) it is now allowed to write
%(trailers:only=yes)
By itself this only gives (the not quite so useful) possibility to have
users change their mind in the middle of a formatting
string (%(trailers:only=true,only=false)). However, it gives users the
opportunity to override defaults from future options.
Signed-off-by: Anders Waldenborg <anders@0x63.nu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
New "--pretty=format:" placeholders %GF and %GP that show the GPG
key fingerprints have been invented.
* mg/gpg-fingerprint:
gpg-interface.c: obtain primary key fingerprint as well
gpg-interface.c: support getting key fingerprint via %GF format
gpg-interface.c: use flags to determine key/signer info presence
|
|
Obtain the primary key fingerprint off VALIDSIG status message,
and expose it via %GP format.
Signed-off-by: Michał Górny <mgorny@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Support processing VALIDSIG status that provides additional information
for valid signatures. Use this information to propagate signing key
fingerprint and expose it via %GF pretty format. This format can be
used to build safer key verification systems that verify the key via
complete fingerprint rather than short/long identifier provided by %GK.
Signed-off-by: Michał Górny <mgorny@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git interpret-trailers" and its underlying machinery had a buggy
code that attempted to ignore patch text after commit log message,
which triggered in various codepaths that will always get the log
message alone and never get such an input.
* jk/trailer-fixes:
append_signoff: use size_t for string offsets
sequencer: ignore "---" divider when parsing trailers
pretty, ref-filter: format %(trailers) with no_divider option
interpret-trailers: allow suppressing "---" divider
interpret-trailers: tighten check for "---" patch boundary
trailer: pass process_trailer_opts to trailer_info_get()
trailer: use size_t for iterating trailer list
trailer: use size_t for string offsets
|
|
In both of these cases we know that we are feeding the
trailer-parsing code a pure commit message. We should tell
it so, which avoids false positives for a commit message
that contains a "---" line.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up to use size_t/ssize_t when they are the right type.
* jk/size-t:
strbuf_humanise: use unsigned variables
pass st.st_size as hint for strbuf_readlink()
strbuf_readlink: use ssize_t
strbuf: use size_t for length in intermediate variables
reencode_string: use size_t for string lengths
reencode_string: use st_add/st_mult helpers
|
|
lookup_commit_reference() and friends have been updated to find
in-core object for a specific in-core repository instance.
* sb/object-store-lookup: (32 commits)
commit.c: allow lookup_commit_reference to handle arbitrary repositories
commit.c: allow lookup_commit_reference_gently to handle arbitrary repositories
tag.c: allow deref_tag to handle arbitrary repositories
object.c: allow parse_object to handle arbitrary repositories
object.c: allow parse_object_buffer to handle arbitrary repositories
commit.c: allow get_cached_commit_buffer to handle arbitrary repositories
commit.c: allow set_commit_buffer to handle arbitrary repositories
commit.c: migrate the commit buffer to the parsed object store
commit-slabs: remove realloc counter outside of slab struct
commit.c: allow parse_commit_buffer to handle arbitrary repositories
tag: allow parse_tag_buffer to handle arbitrary repositories
tag: allow lookup_tag to handle arbitrary repositories
commit: allow lookup_commit to handle arbitrary repositories
tree: allow lookup_tree to handle arbitrary repositories
blob: allow lookup_blob to handle arbitrary repositories
object: allow lookup_object to handle arbitrary repositories
object: allow object_as_type to handle arbitrary repositories
tag: add repository argument to deref_tag
tag: add repository argument to parse_tag_buffer
tag: add repository argument to lookup_tag
...
|
|
The iconv interface takes a size_t, which is the appropriate
type for an in-memory buffer. But our reencode_string_*
functions use integers, meaning we may get confusing results
when the sizes exceed INT_MAX. Let's use size_t
consistently.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Switch several hard-coded constants into expressions based either on
GIT_MAX_HEXSZ or the_hash_algo.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a repository argument to allow callers of get_cached_commit_buffer to
be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a repository argument to allow the callers of parse_object
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code has been taught to use the duplicated information stored
in the commit-graph file to learn the tree object name for a commit
to avoid opening and parsing the commit object when it makes sense
to do so.
* ds/lazy-load-trees:
coccinelle: avoid wrong transformation suggestions from commit.cocci
commit-graph: lazy-load trees for commits
treewide: replace maybe_tree with accessor methods
commit: create get_commit_tree() method
treewide: rename tree to maybe_tree
|
|
In anticipation of making trees load lazily, create a Coccinelle
script (contrib/coccinelle/commit.cocci) to ensure that all
references to the 'maybe_tree' member of struct commit are either
mutations or accesses through get_commit_tree() or
get_commit_tree_oid().
Apply the Coccinelle script to create the rest of the patch.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using the commit-graph file to walk commit history removes the large
cost of parsing commits during the walk. This exposes a performance
issue: lookup_tree() takes a large portion of the computation time,
even when Git never uses those trees.
In anticipation of lazy-loading these trees, rename the 'tree' member
of struct commit to 'maybe_tree'. This serves two purposes: it hints
at the future role of possibly being NULL even if the commit has a
valid tree, and it allows for unambiguous transformation from simple
member access (i.e. commit->maybe_tree) to method access.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the declaration and definition of strbuf_add_unique_abbrev to
make it take a pointer to struct object_id. Predeclare the struct in
strbuf.h, as cache.h includes strbuf.h before it declares the struct,
and otherwise the struct declaration would have the wrong scope.
Apply the following semantic patch, along with the standard object_id
transforms, to adjust the callers:
@@
expression E1, E2, E3;
@@
- strbuf_add_unique_abbrev(E1, E2.hash, E3);
+ strbuf_add_unique_abbrev(E1, &E2, E3);
@@
expression E1, E2, E3;
@@
- strbuf_add_unique_abbrev(E1, E2->hash, E3);
+ strbuf_add_unique_abbrev(E1, E2, E3);
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When `log --decorate` is used, git will decorate commits with all
available refs. While in most cases this may give the desired effect,
under some conditions it can lead to excessively verbose output.
Introduce two command line options, `--decorate-refs=<pattern>` and
`--decorate-refs-exclude=<pattern>` to allow the user to select which
refs are used in decoration.
When "--decorate-refs=<pattern>" is given, only the refs that match the
pattern are used in decoration. The refs that match the pattern when
"--decorate-refs-exclude=<pattern>" is given, are never used in
decoration.
These options follow the same convention for mixing negative and
positive patterns across the system, assuming that the inclusive default
is to match all refs available.
(1) if there is no positive pattern given, pretend as if an
inclusive default positive pattern was given;
(2) for each candidate, reject it if it matches no positive
pattern, or if it matches any one of the negative patterns.
The rules for what is considered a match are slightly different from the
rules used elsewhere.
Commands like `log --glob` assume a trailing '/*' when glob chars are
not present in the pattern. This makes it difficult to specify a single
ref. On the other hand, commands like `describe --match --all` allow
specifying exact refs, but do not have the convenience of allowing
"shorthand refs" like 'refs/heads' or 'heads' to refer to
'refs/heads/*'.
The commands introduced in this patch consider a match if:
(a) the pattern contains globs chars,
and regular pattern matching returns a match.
(b) the pattern does not contain glob chars,
and ref '<pattern>' exists, or if ref exists under '<pattern>/'
This allows both behaviours (allowing single refs and shorthand refs)
yet remaining compatible with existent commands.
Helped-by: Kevin Daudt <me@ikke.info>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Rafael Ascensão <rafa.almas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for adding consistent "%(trailers)" atom options to
`git-for-each-ref(1)`'s "--format" argument, change "%(trailers)" in
pretty.c to separate sub-arguments with a ",", instead of a ":".
Multiple sub-arguments are given either as "%(trailers:unfold,only)" or
"%(trailers:only,unfold)".
This change disambiguates between "top-level" arguments, and arguments
given to the trailers atom itself. It is consistent with the behavior of
"%(upstream)" and "%(push)" atoms.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git interpret-trailers" has been taught a "--parse" and a few
other options to make it easier for scripts to grab existing
trailer lines from a commit log message.
* jk/trailers-parse:
doc/interpret-trailers: fix "the this" typo
pretty: support normalization options for %(trailers)
t4205: refactor %(trailers) tests
pretty: move trailer formatting to trailer.c
interpret-trailers: add --parse convenience option
interpret-trailers: add an option to unfold values
interpret-trailers: add an option to show only existing trailers
interpret-trailers: add an option to show only the trailers
trailer: put process_trailers() options into a struct
|
|
The interpret-trailers command recently learned some options
to make its output easier to parse (for a caller whose only
interested in picking out the trailer values). But it's not
very efficient for asking for the trailers of many commits
in a single invocation.
We already have "%(trailers)" to do that, but it doesn't
know about unfolding or omitting non-trailers. Let's plumb
those options through, so you can have the best of both.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The next commit will add many features to the %(trailer)
placeholder in pretty.c. We'll need to access some internal
functions of trailer.c for that, so our options are either:
1. expose those functions publicly
or
2. make an entry point into trailer.c to do the formatting
Doing (2) ends up exposing less surface area, though do note
that caveats in the docstring of the new function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The color placeholders have traditionally been
unconditional, showing colors even when git is not otherwise
configured to do so. This was not so bad for their original
use, which was on the command-line (and the user could
decide at that moment whether to add colors or not). But
these days we have configured formats via pretty.*, and
those should operate correctly in multiple contexts.
In 3082517 (log --format: teach %C(auto,black) to respect
color config, 2012-12-17), we gave an extended placeholder
that could be used to accomplish this. But it's rather
clunky to use, because you have to specify it individually
for each color (and their matching resets) in the format.
We shied away from just switching the default to auto,
because it is technically breaking backwards compatibility.
However, there's not really a use case for unconditional
colors. The most plausible reason you would want them is to
redirect "git log" output to a file. But there, the right
answer is --color=always, as it does the right thing both
with custom user-format colors and git-generated colors.
So let's switch to the more useful default. In the
off-chance that somebody really does find a use for
unconditional colors without wanting to enable the rest of
git's colors, we provide a new %C(always,...) to enable the
old behavior. And we can remind them of --color=always in
the documentation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The pretty-format specifiers like '%h', '%t', etc. had an
optimization that no longer works correctly. In preparation/hope
of getting it correctly implemented, first discard the optimization
that is broken.
* rs/pretty-add-again:
pretty: recalculate duplicate short hashes
|
|
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
|
|
The pretty-format specifiers like '%h', '%t', etc. had an
optimization that no longer works correctly. In preparation/hope
of getting it correctly implemented, first discard the optimization
that is broken.
* rs/pretty-add-again:
pretty: recalculate duplicate short hashes
|
|
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
b9c6232138 (--format=pretty: avoid calculating expensive expansions
twice) optimized adding short hashes multiple times by using the
fact that the output strbuf was only ever simply appended to and
copying the added string from the previous run. That prerequisite
is no longer given; we now have modfiers like %< and %+ that can
cause the cache to lose track of the correct offsets. Remove it.
Reported-by: Michael Giuffrida <michaelpg@chromium.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (53 commits)
object: convert parse_object* to take struct object_id
tree: convert parse_tree_indirect to struct object_id
sequencer: convert do_recursive_merge to struct object_id
diff-lib: convert do_diff_cache to struct object_id
builtin/ls-tree: convert to struct object_id
merge: convert checkout_fast_forward to struct object_id
sequencer: convert fast_forward_to to struct object_id
builtin/ls-files: convert overlay_tree_on_cache to object_id
builtin/read-tree: convert to struct object_id
sha1_name: convert internals of peel_onion to object_id
upload-pack: convert remaining parse_object callers to object_id
revision: convert remaining parse_object callers to object_id
revision: rename add_pending_sha1 to add_pending_oid
http-push: convert process_ls_object and descendants to object_id
refs/files-backend: convert many internals to struct object_id
refs: convert struct ref_update to use struct object_id
ref-filter: convert some static functions to struct object_id
Convert struct ref_array_item to struct object_id
Convert the verify_pack callback to struct object_id
Convert lookup_tag to struct object_id
...
|
|
Make parse_object, parse_object_or_die, and parse_object_buffer take a
pointer to struct object_id. Remove the temporary variables inserted
earlier, since they are no longer necessary. Transform all of the
callers using the following semantic patch:
@@
expression E1;
@@
- parse_object(E1.hash)
+ parse_object(&E1)
@@
expression E1;
@@
- parse_object(E1->hash)
+ parse_object(E1)
@@
expression E1, E2;
@@
- parse_object_or_die(E1.hash, E2)
+ parse_object_or_die(&E1, E2)
@@
expression E1, E2;
@@
- parse_object_or_die(E1->hash, E2)
+ parse_object_or_die(E1, E2)
@@
expression E1, E2, E3, E4, E5;
@@
- parse_object_buffer(E1.hash, E2, E3, E4, E5)
+ parse_object_buffer(&E1, E2, E3, E4, E5)
@@
expression E1, E2, E3, E4, E5;
@@
- parse_object_buffer(E1->hash, E2, E3, E4, E5)
+ parse_object_buffer(E1, E2, E3, E4, E5)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git's source code assumes that unsigned long is at least as precise as
time_t. Which is incorrect, and causes a lot of problems, in particular
where unsigned long is only 32-bit (notably on Windows, even in 64-bit
versions).
So let's just use a more appropriate data type instead. In preparation
for this, we introduce the new `timestamp_t` data type.
By necessity, this is a very, very large patch, as it has to replace all
timestamps' data type in one go.
As we will use a data type that is not necessarily identical to `time_t`,
we need to be very careful to use `time_t` whenever we interact with the
system functions, and `timestamp_t` everywhere else.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, Git's source code represents all timestamps as `unsigned
long`. In preparation for using a more appropriate data type, let's
introduce a symbol `parse_timestamp` (currently being defined to
`strtoul`) where appropriate, so that we can later easily switch to,
say, use `strtoull()` instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* rs/log-email-subject:
pretty: use fmt_output_email_subject()
log-tree: factor out fmt_output_email_subject()
|
|
Add the email-style subject prefix (e.g. "Subject: [PATCH] ") directly
when it's needed instead of letting log_write_email_headers() prepare
it in a static buffer in advance. This simplifies storage ownership and
code flow.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recent patches have expanded on the trailers.c code and we have the
builtin commant git-interpret-trailers which can be used to add or
modify trailer lines. However, there is no easy way to simply display
the trailers of a commit message.
Add support for %(trailers) format modifier which will use the
trailer_info_get() calls to read trailers in an identical way as git
interpret-trailers does. Use a long format option instead of a short
name so that future work can more easily unify ref-filter and pretty
formats.
Add documentation and tests for the same.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* rs/cocci:
use strbuf_add_unique_abbrev() for adding short hashes, part 3
remove unnecessary NULL check before free(3)
coccicheck: make transformation for strbuf_addf(sb, "...") more precise
use strbuf_add_unique_abbrev() for adding short hashes, part 2
use strbuf_addstr() instead of strbuf_addf() with "%s", part 2
gitignore: ignore output files of coccicheck make target
use strbuf_addstr() for adding constant strings to a strbuf, part 2
add coccicheck make target
contrib/coccinelle: fix semantic patch for oid_to_hex_r()
|
|
When "%C(auto)" appears at the very beginning of the pretty format
string, it did not need to issue the reset sequence, but it did.
This is a small optimization to already graduated topic.
* rs/c-auto-resets-attributes:
pretty: avoid adding reset for %C(auto) if output is empty
pretty: let %C(auto) reset all attributes
|
|
The GPG verification status shown in "%G?" pretty format specifier
was not rich enough to differentiate a signature made by an expired
key, a signature made by a revoked key, etc. New output letters
have been assigned to express them.
* mg/gpg-richer-status:
gpg-interface: use more status letters
|
|
Code cleanup.
* rs/cocci:
use strbuf_add_unique_abbrev() for adding short hashes, part 3
remove unnecessary NULL check before free(3)
|
|
According to gpg2's doc/DETAILS:
For each signature only one of the codes GOODSIG, BADSIG,
EXPSIG, EXPKEYSIG, REVKEYSIG or ERRSIG will be emitted.
gpg1 ("classic") behaves the same (although doc/DETAILS differs).
Currently, we parse gpg's status output for GOODSIG, BADSIG and
trust information and translate that into status codes G, B, U, N
for the %G? format specifier.
git-verify-* returns success in the GOODSIG case only. This is
somewhat in disagreement with gpg, which considers the first 5 of
the 6 above as VALIDSIG, but we err on the very safe side.
Introduce additional status codes E, X, Y, R for ERRSIG, EXPSIG,
EXPKEYSIG, and REVKEYSIG so that a user of %G? gets more information
about the absence of a 'G' on first glance.
Requested-by: Alex <agrambot@gmail.com>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Call strbuf_add_unique_abbrev() to add abbreviated hashes to strbufs
instead of taking detours through find_unique_abbrev() and its static
buffer. This is shorter in most cases and a bit more efficient.
The changes here are not easily handled by a semantic patch because
they involve removing temporary variables and deconstructing format
strings for strbuf_addf().
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "%C(auto)" appears at the very beginning of the pretty format
string, it did not need to issue the reset sequence, but it did.
* rs/c-auto-resets-attributes:
pretty: avoid adding reset for %C(auto) if output is empty
|
|
We emit an escape sequence for resetting color and attribute for
%C(auto) to make sure automatic coloring is displayed as intended.
Stop doing that if the output strbuf is empty, i.e. when %C(auto)
appears at the start of the format string, because then there is no
need for a reset and we save a few bytes in the output.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The pretty-format specifier "%C(auto)" used by the "log" family of
commands to enable coloring of the output is taught to also issue a
color-reset sequence to the output.
* rs/c-auto-resets-attributes:
pretty: let %C(auto) reset all attributes
|
|
Code cleanup.
* rs/hex2chr:
introduce hex2chr() for converting two hexadecimal digits to a character
|
|
Reset colors and attributes upon %C(auto) to enable full automatic
control over them; otherwise attributes like bold or reverse could
still be in effect from previous %C placeholders.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rs/hex2chr:
introduce hex2chr() for converting two hexadecimal digits to a character
|