Age | Commit message (Collapse) | Author |
|
Introduce and apply coccinelle rule to discourage an explicit
comparison between a pointer and NULL, and applies the clean-up to
the maintenance track.
* ep/maint-equals-null-cocci:
tree-wide: apply equals-null.cocci
tree-wide: apply equals-null.cocci
contrib/coccinnelle: add equals-null.cocci
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since some callers may want to send warning messages to somewhere other
than stdout/stderr, stop printing "warning: Cannot merge binary files"
from ll-merge and instead modify the return status of ll_merge() to
indicate when a merge of binary files has occurred. Message printing
probably does not belong in a "low-level merge" anyway.
This commit continues printing the message as-is, just from the callers
instead of within ll_merge(). Future changes will start handling the
message differently in the merge-ort codepath.
There was one special case here: the callers in rerere.c do NOT check
for and print such a message; since those code paths explicitly skip
over binary files, there is no reason to check for a return status of
LL_MERGE_BINARY_CONFLICT or print the related message.
Note that my methodology included first modifying ll_merge() to return
a struct, so that the compiler would catch all the callers for me and
ensure I had modified all of them. After modifying all of them, I then
changed the struct to an enum.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many places in the code were doing
while ((d = readdir(dir)) != NULL) {
if (is_dot_or_dotdot(d->d_name))
continue;
...process d...
}
Introduce a readdir_skip_dot_and_dotdot() helper to make that a one-liner:
while ((d = readdir_skip_dot_and_dotdot(dir)) != NULL) {
...process d...
}
This helper particularly simplifies checks for empty directories.
Also use this helper in read_cached_dir() so that our statistics are
consistent across platforms. (In other words, read_cached_dir() should
have been using is_dot_or_dotdot() and skipping such entries, but did
not and left it to treat_path() to detect and mark such entries as
path_none.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We store a struct for each directory we access under .git/rr-cache. The
structs are kept in an array sorted by the binary hash associated with
their name (and we do lookups with a binary search).
This works OK, but there are a few small downsides:
- the amount of code isn't huge, but it's more than we'd need using one
of our other stock data structures
- the insertion into a sorted array is quadratic (though in practice
it's unlikely anybody has enough conflicts for this to matter)
- it's intimately tied to the representation of an object hash. This
isn't a big deal, as the conflict ids we generate use the same hash,
but it produces a few awkward bits (e.g., we are the only user of
hash_pos() that is not using object_id).
Let's instead just treat the directory names as strings, and store them
in a strmap. This is less code, and removes the use of hash_pos().
Insertion is now non-quadratic, though we probably use a bit more
memory. Besides the hash table overhead, and storing hex bytes instead
of a binary hash, we actually store each name twice. Other code expects
to access the name of a rerere_dir struct from the struct itself, so we
need a copy there. But strmap keeps its own copy of the name, as well.
Using a bare hashmap instead of strmap means we could use the name for
both, but at the cost of extra code (e.g., our own comparison function).
Likewise, strmap has a feature to use a pointer to the in-struct name at
the cost of a little extra code. I didn't do either here, as simple code
seemed more important than squeezing out a few bytes of efficiency.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We check only that get_sha1_hex() doesn't complain, which means we'd
match an all-hex name with trailing cruft after it. This probably
doesn't matter much in practice, since there shouldn't be anything else
in the rr-cache directory, but it could possibly cause us to mix up sha1
and sha256 entries (which also shouldn't be intermingled, but could be
leftovers from a repository conversion).
Note that "get_sha1_hex()" is a confusing historical name. It is
actually using the_hash_algo, so it would be sha256 in a sha256 repo.
We'll switch to using parse_oid_hex(), because that conveniently
advances our pointer. But it also gets rid of the sha1 name. Arguably
it's a little funny to use "object_id" here for something that isn't
actually naming an object, but it's unlikely to be a problem (and is
contained in a single function).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In rerere_gc(), we walk over the .git/rr_cache directory and create a
struct for each entry we find. We feed any name we get from readdir() to
find_rerere_dir(), which then calls get_sha1_hex() on it (since we use
the binary hash as a lookup key). If that fails (i.e., the directory
name is not what we expected), it returns NULL. But the comment in
find_rerere_dir() says "BUG".
It _would_ be a bug for the call from new_rerere_id_hex(), the only
other code path, to fail here; it's generating the hex internally. But
the call in rerere_gc() is using it say "is this a plausible directory
name".
Let's instead have rerere_gc() do its own "is this plausible" check.
That has two benefits:
- we can now reliably BUG() inside find_rerere_dir(), which would
catch bugs in the other code path (and we now will never return NULL
from the function, which makes it easier to see that a rerere_id
struct will always have a non-NULL "collection" field).
- it makes the use of the binary hash an implementation detail of
find_rerere_dir(), not known by callers. That will free us up to
change it in a future patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change all remnants of "sha1" in hash-lookup.c and .h and rename them to
reflect that we're not just able to handle SHA-1 these days.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename this function to reflect that we're not just able to handle SHA-1
these days. There are a few instances of "sha1" left in sha1-lookup.[ch]
after this, but those will be addressed in the next commit.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reported-by: Jens Schleusener <Jens.Schleusener@fossies.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace the uses of sha1_to_hex in this function with hash_to_hex to
allow the use of SHA-256 as well. Rename a variable since it is no
longer limited to SHA-1.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
read_index() shares the same problem as hold_locked_index(): it
assumes $GIT_DIR/index. Move all call sites to repo_read_index()
instead. read_index_preload() and read_index_unmerged() are also
killed as a consequence.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
hold_locked_index() assumes the index path at $GIT_DIR/index. This is
not good for places that take an arbitrary index_state instead of
the_index, which is basically everywhere except builtin/.
Replace it with repo_hold_locked_index(). hold_locked_index() remains
as a wrapper around repo_hold_locked_index() to reduce changes in builtin/
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
More codepaths are moving away from hardcoded hash sizes.
* bc/hash-transition-part-15:
rerere: convert to use the_hash_algo
submodule: make zero-oid comparison hash function agnostic
apply: rename new_sha1_prefix and old_sha1_prefix
apply: replace hard-coded constants
tag: express constant in terms of the_hash_algo
transport: use parse_oid_hex instead of a constant
upload-pack: express constants in terms of the_hash_algo
refs/packed-backend: express constants using the_hash_algo
packfile: express constants in terms of the_hash_algo
pack-revindex: express constants in terms of the_hash_algo
builtin/fetch-pack: remove constants with parse_oid_hex
builtin/mktree: remove hard-coded constant
builtin/repack: replace hard-coded constants
pack-bitmap-write: use GIT_MAX_RAWSZ for allocation
object_id.cocci: match only expressions of type 'struct object_id'
|
|
Various codepaths in the core-ish part learn to work on an
arbitrary in-core index structure, not necessarily the default
instance "the_index".
* nd/the-index: (23 commits)
revision.c: reduce implicit dependency the_repository
revision.c: remove implicit dependency on the_index
ws.c: remove implicit dependency on the_index
tree-diff.c: remove implicit dependency on the_index
submodule.c: remove implicit dependency on the_index
line-range.c: remove implicit dependency on the_index
userdiff.c: remove implicit dependency on the_index
rerere.c: remove implicit dependency on the_index
sha1-file.c: remove implicit dependency on the_index
patch-ids.c: remove implicit dependency on the_index
merge.c: remove implicit dependency on the_index
merge-blobs.c: remove implicit dependency on the_index
ll-merge.c: remove implicit dependency on the_index
diff-lib.c: remove implicit dependency on the_index
read-cache.c: remove implicit dependency on the_index
diff.c: remove implicit dependency on the_index
grep.c: remove implicit dependency on the_index
diff.c: remove the_index dependency in textconv() functions
blame.c: rename "repo" argument to "r"
combine-diff.c: remove implicit dependency on the_index
...
|
|
Since this data is stored in the .git directory, it makes sense for us
to use the same hash algorithm for it as for everything else. Convert
the remaining uses of SHA-1 to use the_hash_algo. Use GIT_MAX_RAWSZ for
allocations. Rename various struct members, local variables, and a
function to be named "hash" instead of "sha1".
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A corner case bugfix in "git rerere" code.
* en/rerere-multi-stage-1-fix:
rerere: avoid buffer overrun
t4200: demonstrate rerere segfault on specially crafted merge
|
|
The reason rerere(), rerere_forget() and rerere_remaining() take a
struct repository instead of struct index_state is not obvious from
the patch:
Deep in update_paths() and find_conflict(), hold_locked_index() and
read_index() are called. These functions assumes the index path at
$GIT_DIR/index which is not always true when you take an arbitrary
index state. Taking a repository will allow us to point to the right
index path later when we replace them with repo_ versions.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fixes to "git rerere" corner cases, especially when conflict
markers cannot be parsed in the file.
* tg/rerere:
rerere: recalculate conflict ID when unresolved conflict is committed
rerere: teach rerere to handle nested conflicts
rerere: return strbuf from handle path
rerere: factor out handle_conflict function
rerere: only return whether a path has conflicts or not
rerere: fix crash with files rerere can't handle
rerere: add documentation for conflict normalization
rerere: mark strings for translation
rerere: wrap paths in output in sq
rerere: lowercase error messages
rerere: unify error messages when read_cache fails
|
|
check_one_conflict() compares `i` to `active_nr` in two places to avoid
buffer overruns, but left out an important third location.
The code did used to have a check here comparing i to active_nr, back
before commit fb70a06da2f1 ("rerere: fix an off-by-one non-bug",
2015-06-28), however the code at the time used an 'if' rather than a
'while' meaning back then that this loop could not have read past the
end of the array, making the check unnecessary and it was removed.
Unfortunately, in commit 5eda906b2873 ("rerere: handle conflicts with
multiple stage #1 entries", 2015-07-24), the 'if' was changed to a
'while' and the check comparing i and active_nr was not re-instated,
leading to this problem.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make the match_patchspec API and friends take an index_state instead
of assuming the_index in dir.c. All external call sites are converted
blindly to keep the patch simple and retain current behavior.
Individual call sites may receive further updates to use the right
index instead of the_index.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently when a user doesn't resolve a conflict, commits the results,
and does an operation which creates another conflict, rerere will use
the ID of the previously unresolved conflict for the new conflict.
This is because the conflict is kept in the MERGE_RR file, which
'rerere' reads every time it is invoked.
After the new conflict is solved, rerere will record the resolution
with the ID of the old conflict. So in order to replay the conflict,
both merges would have to be re-done, instead of just the last one, in
order for rerere to be able to automatically resolve the conflict.
Instead of that, assign a new conflict ID if there are still conflicts
in a file and the file had conflicts at a previous step. This ID
matches the conflict we actually resolved at the corresponding step.
Note that there are no backwards compatibility worries here, as rerere
would have failed to even normalize the conflict before this patch
series.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently rerere can't handle nested conflicts and will error out when
it encounters such conflicts. Do that by recursively calling the
'handle_conflict' function to normalize the conflict.
Note that a conflict like this would only be produced if a user
commits a file with conflict markers, and gets a conflict including
that in a susbsequent operation.
The conflict ID calculation here deserves some explanation:
As we are using the same handle_conflict function, the nested conflict
is normalized the same way as for non-nested conflicts, which means
the ancestor in the diff3 case is stripped out, and the parts of the
conflict are ordered alphabetically.
The conflict ID is however is only calculated in the top level
handle_conflict call, so it will include the markers that 'rerere'
adds to the output. e.g. say there's the following conflict:
<<<<<<< HEAD
1
=======
<<<<<<< HEAD
3
=======
2
>>>>>>> branch-2
>>>>>>> branch-3~
it would be recorde as follows in the preimage:
<<<<<<<
1
=======
<<<<<<<
2
=======
3
>>>>>>>
>>>>>>>
and the conflict ID would be calculated as
sha1(1<NUL><<<<<<<
2
=======
3
>>>>>>><NUL>)
Stripping out vs. leaving the conflict markers in place in the inner
conflict should have no practical impact, but it simplifies the
implementation.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently we write the conflict to disk directly in the handle_path
function. To make it re-usable for nested conflicts, instead of
writing the conflict out directly, store it in a strbuf and let the
caller write it out.
This does mean some slight increase in memory usage, however that
increase is limited to the size of the largest conflict we've
currently processed. We already keep one copy of the conflict in
memory, and it shouldn't be too large, so the increase in memory usage
seems acceptable.
As a bonus this lets us get replace the rerere_io_putconflict function
with a trivial two line function.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Factor out the handle_conflict function, which handles a single
conflict in a path. This is in preparation for a subsequent commit,
where this function will be re-used.
Note that this does change the behaviour of 'git rerere' slightly.
Where previously we'd consider all files where an unmatched conflict
marker is found as invalid, we now only consider files invalid when
the "ours" conflict marker ("<<<<<<< <text>") is unmatched, not when
other conflict markers (e.g. "=======") is unmatched.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We currently return the exact number of conflict hunks a certain path
has from the 'handle_paths' function. However all of its callers only
care whether there are conflicts or not or if there is an error.
Return only that information, and document that only that information
is returned. This will simplify the code in the subsequent steps.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently when a user does a conflict resolution and ends it (in any
way that calls 'git rerere' again) with a file 'rerere' can't handle,
subsequent rerere operations that are interested in that path, such as
'rerere clear' or 'rerere forget <path>' will fail, or even worse in
the case of 'rerere clear' segfault.
Such states include nested conflicts, or a conflict marker that
doesn't have any match.
This is because 'git rerere' calculates a conflict file and writes it
to the MERGE_RR file. When the user then changes the file in any way
rerere can't handle, and then calls 'git rerere' on it again to record
the conflict resolution, the handle_file function fails, and removes
the 'preimage' file in the rr-cache in the process, while leaving the
ID in the MERGE_RR file.
Now when 'rerere clear' is run, it reads the ID from the MERGE_RR
file, however the 'fit_variant' function for the ID is never called as
the 'preimage' file does not exist anymore. This means
'collection->status' in 'has_rerere_resolution' is NULL, and the
command will crash.
To fix this, remove the rerere ID from the MERGE_RR file in the case
when we can't handle it, just after the 'preimage' file was removed
and remove the corresponding variant from .git/rr-cache/. Removing it
unconditionally is fine here, because if the user would have resolved
the conflict and ran rerere, the entry would no longer be in the
MERGE_RR file, so we wouldn't have this problem in the first place,
while if the conflict was not resolved.
Currently there is nothing left in this folder, as the 'preimage'
was already deleted by the 'handle_file' function, so 'remove_variant'
is a no-op. Still call the function, to make sure we clean everything
up, in case we add some other files corresponding to a variant in the
future.
Note that other variants that have the same conflict ID will not be
touched.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add some documentation for the logic behind the conflict normalization
in rerere.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git rerere' is considered a porcelain command and as such its output
should be translated. Its functionality is also only enabled through
a config setting, so scripts really shouldn't rely on the output
either way.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The conversion to pass "the_repository" and then "a_repository"
throughout the object access API continues.
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
|
|
It looks like most paths in the output in the git codebase are wrapped
in single quotes. Standardize on that in rerere as well.
Apart from being more consistent, this also makes some of the strings
match strings that are already translated in other parts of the
codebase, thus reducing the work for translators, when the strings are
marked for translation in a subsequent commit.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Documentation/CodingGuidelines mentions that error messages should be
lowercase. Prior to marking them for translation follow that pattern
in rerere as well, so translators won't have to translate messages
that don't conform to our guidelines.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have multiple different variants of the error message we show to
the user if 'read_cache' fails. The "Could not read index" variant we
are using in 'rerere.c' is currently not used anywhere in translated
form.
As a subsequent commit will mark all output that comes from 'rerere.c'
for translation, make the life of the translators a little bit easier
by using a string that is used elsewhere, and marked for translation
there, and thus most likely already translated.
"index file corrupt" seems to be the most common error message we show
when 'read_cache' fails, so use that here as well.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up to adjust to a more recent lockfile API convention that
allows lockfile instances kept on the stack.
* ma/lockfile-cleanup:
lock_file: move static locks into functions
lock_file: make function-local locks non-static
refs.c: do not die if locking fails in `delete_pseudoref()`
refs.c: do not die if locking fails in `write_pseudoref()`
t/helper/test-write-cache: clean up lock-handling
|
|
Migrate all git_path_* functions that are defined in path.c to take a
repository argument. Unlike other patches in this series, do not use the
#define trick, as we rewrite the whole function, which is rather small.
This doesn't migrate all the functions, as other builtins have their own
local path functions defined using GIT_PATH_FUNC. So keep that macro
around to serve the other locations.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This should make these functions easier to find and cache.h less
overwhelming to read.
In particular, this moves:
- read_object_file
- oid_object_info
- write_object_file
As a result, most of the codebase needs to #include object-store.h.
In this patch the #include is only added to files that would fail to
compile otherwise. It would be better to #include wherever
identifiers from the header are used. That can happen later
when we have better tooling for it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Placing `struct lock_file`s on the stack used to be a bad idea, because
the temp- and lockfile-machinery would keep a pointer into the struct.
But after 076aa2cbd (tempfile: auto-allocate tempfiles on heap,
2017-09-05), we can safely have lockfiles on the stack. (This applies
even if a user returns early, leaving a locked lock behind.)
Each of these `struct lock_file`s is used from within a single function.
Move them into the respective functions to make the scope clearer and
drop the staticness.
For good measure, I have inspected these sites and come to believe that
they always release the lock, with the possible exception of bailing out
using `die()` or `exit()` or by returning from a `cmd_foo()`.
As pointed out by Jeff King, it would be bad if someone held on to a
`struct lock_file *` for some reason. After some grepping, I agree with
his findings: no-one appears to be doing that.
After this commit, the remaining occurrences of "static struct
lock_file" are locks that are used from within different functions. That
is, they need to remain static. (Short of more intrusive changes like
passing around pointers to non-static locks.)
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (36 commits)
convert: convert to struct object_id
sha1_file: introduce a constant for max header length
Convert lookup_replace_object to struct object_id
sha1_file: convert read_sha1_file to struct object_id
sha1_file: convert read_object_with_reference to object_id
tree-walk: convert tree entry functions to object_id
streaming: convert istream internals to struct object_id
tree-walk: convert get_tree_entry_follow_symlinks internals to object_id
builtin/notes: convert static functions to object_id
builtin/fmt-merge-msg: convert remaining code to object_id
sha1_file: convert sha1_object_info* to object_id
Convert remaining callers of sha1_object_info_extended to object_id
packfile: convert unpack_entry to struct object_id
sha1_file: convert retry_bad_packed_offset to struct object_id
sha1_file: convert assert_sha1_type to object_id
builtin/mktree: convert to struct object_id
streaming: convert open_istream to use struct object_id
sha1_file: convert check_sha1_signature to struct object_id
sha1_file: convert read_loose_object to use struct object_id
builtin/index-pack: convert struct ref_delta_entry to object_id
...
|
|
Convert read_sha1_file to take a pointer to struct object_id and rename
it read_object_file. Do the same for read_sha1_file_extended.
Convert one use in grep.c to use the new function without any other code
change, since the pointer being passed is a void pointer that is already
initialized with a pointer to struct object_id. Update the declaration
and definitions of the modified functions, and apply the following
semantic patch to convert the remaining callers:
@@
expression E1, E2, E3;
@@
- read_sha1_file(E1.hash, E2, E3)
+ read_object_file(&E1, E2, E3)
@@
expression E1, E2, E3;
@@
- read_sha1_file(E1->hash, E2, E3)
+ read_object_file(E1, E2, E3)
@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1.hash, E2, E3, E4)
+ read_object_file_extended(&E1, E2, E3, E4)
@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1->hash, E2, E3, E4)
+ read_object_file_extended(E1, E2, E3, E4)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have several callers like
if (active_cache_changed && write_locked_index(...))
handle_error();
rollback_lock_file(...);
where the final rollback is needed because "!active_cache_changed"
shortcuts the if-expression. There are also a few variants of this,
including some if-else constructs that make it more clear when the
explicit rollback is really needed.
Teach `write_locked_index()` to take a new flag SKIP_IF_UNCHANGED and
simplify the callers. Leave the most complicated of the callers (in
builtin/update-index.c) unchanged. Rewriting it to use this new flag
would end up duplicating logic.
We could have made the new flag behave the other way round
("FORCE_WRITE"), but that could break existing users behind their backs.
Let's take the more conservative approach. We can still migrate existing
callers to use our new flag. Later we might even be able to flip the
default, possibly without entirely ignoring the risk to in-flight or
out-of-tree topics.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the helper macro MOVE_ARRAY to move arrays. This is shorter and
safer, as it automatically infers the size of elements.
Patch generated by Coccinelle and contrib/coccinelle/array.cocci in
Travis CI's static analysis build job.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many codepaths did not diagnose write failures correctly when disks
go full, due to their misuse of write_in_full() helper function,
which have been corrected.
* jk/write-in-full-fix:
read_pack_header: handle signed/unsigned comparison in read result
config: flip return value of store_write_*()
notes-merge: use ssize_t for write_in_full() return value
pkt-line: check write_in_full() errors against "< 0"
convert less-trivial versions of "write_in_full() != len"
avoid "write_in_full(fd, buf, len) != len" pattern
get-tar-commit-id: check write_in_full() return against 0
config: avoid "write_in_full(fd, buf, len) < len" pattern
|
|
The return value of write_in_full() is either "-1", or the
requested number of bytes[1]. If we make a partial write
before seeing an error, we still return -1, not a partial
value. This goes back to f6aa66cb95 (write_in_full: really
write in full or return error on disk full., 2007-01-11).
So checking anything except "was the return value negative"
is pointless. And there are a couple of reasons not to do
so:
1. It can do a funny signed/unsigned comparison. If your
"len" is signed (e.g., a size_t) then the compiler will
promote the "-1" to its unsigned variant.
This works out for "!= len" (unless you really were
trying to write the maximum size_t bytes), but is a
bug if you check "< len" (an example of which was fixed
recently in config.c).
We should avoid promoting the mental model that you
need to check the length at all, so that new sites are
not tempted to copy us.
2. Checking for a negative value is shorter to type,
especially when the length is an expression.
3. Linus says so. In d34cf19b89 (Clean up write_in_full()
users, 2007-01-11), right after the write_in_full()
semantics were changed, he wrote:
I really wish every "write_in_full()" user would just
check against "<0" now, but this fixes the nasty and
stupid ones.
Appeals to authority aside, this makes it clear that
writing it this way does not have an intentional
benefit. It's a historical curiosity that we never
bothered to clean up (and which was undoubtedly
cargo-culted into new sites).
So let's convert these obviously-correct cases (this
includes write_str_in_full(), which is just a wrapper for
write_in_full()).
[1] A careful reader may notice there is one way that
write_in_full() can return a different value. If we ask
write() to write N bytes and get a return value that is
_larger_ than N, we could return a larger total. But
besides the fact that this would imply a totally broken
version of write(), it would already invoke undefined
behavior. Our internal remaining counter is an unsigned
size_t, which means that subtracting too many byte will
wrap it around to a very large number. So we'll instantly
begin reading off the end of the buffer, trying to write
gigabytes (or petabytes) of data.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These two configuration variables are described in the documentation
to take an expiry period expressed in the number of days:
gc.rerereResolved::
Records of conflicted merge you resolved earlier are
kept for this many days when 'git rerere gc' is run.
The default is 60 days.
gc.rerereUnresolved::
Records of conflicted merge you have not resolved are
kept for this many days when 'git rerere gc' is run.
The default is 15 days.
There is no strong reason not to allow a more general "approxidate"
expiry specification, e.g. "5.days.ago", or "never".
Rename the config_get_expiry() helper introduced in the previous
step to git_config_get_expiry_in_days() and move it to a more
generic place, config.c, and use date.c::parse_expiry_date() to do
so. Give it an ability to allow the caller to tell among three
cases (i.e. there is no "gc.rerereResolved" config, there is and it
is correctly parsed into the *expiry variable, and there was an
error in parsing the given value). The current caller can work
correctly without using the return value, though.
In the future, we may find other variables that only allow an
integer that specifies "this many days" or other unit of time, and
when it happens we may need to drop "_days" suffix from the name of
the function and instead pass the "scale" value as another parameter.
But this will do for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The two configuration variables, gc.rerereResolved and
gc.rerereUnresolved, are measured in days and are passed as such
into the prune_one() helper function, which worked in time_t to see
if an entry in the rerere database is past its expiry.
Instead, have the caller turn the number of days into the expiry
timestamp. Further, use timestamp_t instead of time_t. This will
make it possible to extend the way the configuration variable is
spelled by using date.c::parse_expiry_date() that gives the expiry
timestamp in timestamp_t.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A common pattern to free a piece of memory and assign NULL to the
pointer that used to point at it has been replaced with a new
FREE_AND_NULL() macro.
* ab/free-and-null:
*.[ch] refactoring: make use of the FREE_AND_NULL() macro
coccinelle: make use of the "expression" FREE_AND_NULL() rule
coccinelle: add a rule to make "expression" code use FREE_AND_NULL()
coccinelle: make use of the "type" FREE_AND_NULL() rule
coccinelle: add a rule to make "type" code use FREE_AND_NULL()
git-compat-util: add a FREE_AND_NULL() wrapper around free(ptr); ptr = NULL
|
|
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
|
|
Replace occurrences of `free(ptr); ptr = NULL` which weren't caught by
the coccinelle rule. These fall into two categories:
- free/NULL assignments one after the other which coccinelle all put
on one line, which is functionally equivalent code, but very ugly.
- manually spotted occurrences where the NULL assignment isn't right
after the free() call.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|