| Age | Commit message (Collapse) | Author |
|---|
|
We trace statistics about the effectiveness of changed-path Bloom
filters since 42e50e78 (revision.c: add trace2 stats around Bloom
filter usage, 2020-04-06). Add similar tracing for the topo-walk
algorithm that uses generation numbers to limit the walk size.
This information can help investigate and describe benefits to
heuristics and other changes.
The information that is printed is in JSON format and can be formatted
nicely to present as follows:
{
"count_explort_walked":2603,
"count_indegree_walked":2603,
"count_topo_walked":473
}
Each of these values count the number of commits are visited by each of
the three "stages" of the topo-walk as detailed in b4542418 (revision.c:
generation-based topo-order algorithm, 2018-11-01).
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* ma/grep-init-default:
MyFirstObjectWalk: drop `init_walken_defaults()`
grep: copy struct in one fell swoop
grep: use designated initializers for `grep_defaults`
grep: don't set up a "default" repo for grep
|
|
In 15fabd1bbd ("builtin/grep.c: make configuration callback more
reusable", 2012-10-09), we learned to fill a `static struct grep_opt
grep_defaults` which we can use as a blueprint for other such structs.
At the time, we didn't consider designated initializers to be widely
useable, but these days, we do. (See, e.g., cbc0f81d96 ("strbuf: use
designated initializers in STRBUF_INIT", 2017-07-10).)
Use designated initializers to let the compiler set up the struct and so
that we don't need to remember to call `init_grep_defaults()`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`init_grep_defaults()` fills a `static struct grep_opt grep_defaults`.
This struct is then used by `grep_init()` as a blueprint for other such
structs. Notably, `grep_init()` takes a `struct repo *` and assigns it
into the target struct.
As a result, it is unnecessary for us to take a `struct repo *` in
`init_grep_defaults()` as well. We assign it into the default struct and
never look at it again. And in light of how we return early if we have
already set up the default struct, it's not just unnecessary, but is
also a bit confusing: If we are called twice and with different repos,
is it a bug or a feature that we ignore the second repo?
Drop the repo parameter for `init_grep_defaults()`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that hashamp has lazy initialization and a HASHMAP_INIT macro,
hashmaps allocated on the stack can be initialized without a call to
hashmap_init() and in some cases makes the code a bit shorter. Convert
some callsites over to take advantage of this.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
hashmap_free(), hashmap_free_entries(), and hashmap_free_() have existed
for a while, but aren't necessarily the clearest names, especially with
hashmap_partial_clear() being added to the mix and lazy-initialization
now being supported. Peff suggested we adopt the following names[1]:
- hashmap_clear() - remove all entries and de-allocate any
hashmap-specific data, but be ready for reuse
- hashmap_clear_and_free() - ditto, but free the entries themselves
- hashmap_partial_clear() - remove all entries but don't deallocate
table
- hashmap_partial_clear_and_free() - ditto, but free the entries
This patch provides the new names and converts all existing callers over
to the new naming scheme.
[1] https://lore.kernel.org/git/20201030125059.GA3277724@coredump.intra.peff.net/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many functions take an argv/argc pair, but never actually look at argc.
This makes it useless at best (we use the NULL sentinel in argv to find
the end of the array), and misleading at worst (what happens if the argc
count does not match the argv NULL?).
In each of these instances, the argv NULL does match the argc count, so
there are no bugs here. But let's tighten the interfaces to make it
harder to get wrong (and to reduce some -Wunused-parameter complaints).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git commit-graph write" learned to limit the number of bloom
filters that are computed from scratch with the --max-new-filters
option.
* tb/bloom-improvements:
commit-graph: introduce 'commitGraph.maxNewFilters'
builtin/commit-graph.c: introduce '--max-new-filters=<n>'
commit-graph: rename 'split_commit_graph_opts'
bloom: encode out-of-bounds filters as non-empty
bloom/diff: properly short-circuit on max_changes
bloom: use provided 'struct bloom_filter_settings'
bloom: split 'get_bloom_filter()' in two
commit-graph.c: store maximum changed paths
commit-graph: respect 'commitGraph.readChangedPaths'
t/helper/test-read-graph.c: prepare repo settings
commit-graph: pass a 'struct repository *' in more places
t4216: use an '&&'-chain
commit-graph: introduce 'get_bloom_filter_settings()'
|
|
"git diff/show" on a change that involves a submodule used to read
the information on commits in the submodule from a wrong repository
and gave a wrong information when the commit-graph is involved.
* mf/submodule-summary-with-correct-repository:
submodule: use submodule repository when preparing summary
revision: use repository from rev_info when parsing commits
|
|
'get_bloom_filter' takes a flag to control whether it will compute a
Bloom filter if the requested one is missing. In the next patch, we'll
add yet another parameter to this method, which would force all but one
caller to specify an extra 'NULL' parameter at the end.
Instead of doing this, split 'get_bloom_filter' into two functions:
'get_bloom_filter' and 'get_or_compute_bloom_filter'. The former only
looks up a Bloom filter (and does not compute one if it's missing,
thus dropping the 'compute_if_not_present' flag). The latter does
compute missing Bloom filters, with an additional parameter to store
whether or not it needed to do so.
This simplifies many call-sites, since the majority of existing callers
to 'get_bloom_filter' do not want missing Bloom filters to be computed
(so they can drop the parameter entirely and use the simpler version of
the function).
While we're at it, instrument the new 'get_or_compute_bloom_filter()'
with counters in the 'write_commit_graph_context' struct which store
the number of filters that we did and didn't compute, as well as filters
that were truncated.
It would be nice to drop the 'compute_if_not_present' flag entirely,
since all remaining callers of 'get_or_compute_bloom_filter' pass it as
'1', but this will change in a future patch and hence cannot be removed.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git status" has trouble showing where it came from by interpreting
reflog entries that recordcertain events, e.g. "checkout @{u}", and
gives a hard/fatal error. Even though it inherently is impossible
to give a correct answer because the reflog entries lose some
information (e.g. "@{u}" does not record what branch the user was
on hence which branch 'the upstream' needs to be computed, and even
if the record were available, the relationship between branches may
have changed), at least hide the error to allow "status" show its
output.
* jt/interpret-branch-name-fallback:
wt-status: tolerate dangling marks
refs: move dwim_ref() to header file
sha1-name: replace unsigned int with option struct
|
|
Internal API clean-up to handle two options "diff-index" and "log"
have, which happen to share the same short form, more sensibly.
* so/separate-field-for-m-and-diff-merges:
revision: add separate field for "-m" of "diff-index -m"
|
|
Many places in the code often need a pointer to the commit-graph's
'struct bloom_filter_settings', in which case they often take the value
from the top-most commit-graph.
In the non-split case, this works as expected. In the split case,
however, things get a little tricky. Not all layers in a chain of
incremental commit-graphs are required to themselves have Bloom data,
and so whether or not some part of the code uses Bloom filters depends
entirely on whether or not the top-most level of the commit-graph chain
has Bloom filters.
This has been the behavior since Bloom filters were introduced, and has
been codified into the tests since a759bfa9ee (t4216: add end to end
tests for git log with Bloom filters, 2020-04-06). In fact, t4216.130
requires that Bloom filters are not used in exactly the case described
earlier.
There is no reason that this needs to be the case, since it is perfectly
valid for commits in an earlier layer to have Bloom filters when commits
in a newer layer do not.
Since Bloom settings are guaranteed in practice to be the same for any
layer in a chain that has Bloom data, it is sufficient to traverse the
'->base_graph' pointer until either (1) a non-null 'struct
bloom_filter_settings *' is found, or (2) until we are at the root of
the commit-graph chain.
Introduce a 'get_bloom_filter_settings()' function that does just this,
and use it instead of purely dereferencing the top-most graph's
'->bloom_filter_settings' pointer.
While we're at it, add an additional test in t5324 to guard against code
in the commit-graph writing machinery that doesn't correctly handle a
NULL 'struct bloom_filter *'.
Co-authored-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for a future patch adding a boolean parameter to
repo_interpret_branch_name(), which might be easily confused with an
existing unsigned int parameter, refactor repo_interpret_branch_name()
to take an option struct instead of the unsigned int parameter.
The static function interpret_branch_mark() is also updated to take the
option struct in preparation for that future patch, since it will also
make use of the to-be-introduced boolean parameter.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Feeding "$ZERO_OID" to "git log --ignore-missing --stdin", and
running "git log --ignore-missing $ZERO_OID" fell back to start
digging from HEAD; it has been corrected to become a no-op, like
"git log --tags=no-tag-matches-this-pattern" does.
* jk/rev-input-given-fix:
revision: set rev_input_given in handle_revision_arg()
|
|
Add separate 'match_missing' field for diff-index to use and set it when we
encounter "-m" option. This field won't then be cleared when another meaning of
"-m" is reverted (e.g., by "--no-diff-merges"), nor it will be affected by
future option(s) that might drive 'ignore_merges' field.
Use this new field from diff-lib:do_oneway_diff() instead of reusing
'ignore_merges' field.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 7ba826290a (revision: add rev_input_given flag, 2017-08-02) added
a flag to rev_info to tell whether we got any revision arguments. As
explained there, this is necessary because some revision arguments may
not produce any pending traversal objects, but should still inhibit
default behaviors (e.g., a glob that matches nothing).
However, it only set the flag in the globbing code, but not for
revisions we get on the command-line or via stdin. This leads to two
problems:
- the command-line code keeps its own separate got_rev_arg flag; this
isn't wrong, but it's confusing and an extra maintenance burden
- even specifically-named rev arguments might end up not adding any
pending objects: if --ignore-missing is set, then specifying a
missing object is a noop rather than an error.
And that leads to some user-visible bugs:
- when deciding whether a default rev like "HEAD" should kick in, we
check both got_rev_arg and rev_input_given. That means that
"--ignore-missing $ZERO_OID" works on the command-line (where we set
got_rev_arg) but not on --stdin (where we don't)
- when rev-list decides whether it should complain that it wasn't
given a starting point, it relies on rev_input_given. So it can't
even get the command-line "--ignore-missing $ZERO_OID" right
Let's consistently set the flag if we got any revision argument. That
lets us clean up the redundant got_rev_arg, and fixes both of those bugs
(but note there are three new tests: we'll confirm the already working
git-log command-line case).
A few implementation notes:
- conceptually we want to set the flag whenever handle_revision_arg()
finds an actual revision arg ("handles" it, you might say). But it
covers a ton of cases with early returns. Rather than annotating
each one, we just wrap it and use its success exit-code to set the
flag in one spot.
- the new rev-list test is in t6018, which is titled to cover globs.
This isn't exactly a glob, but it made sense to stick it with the
other tests that handle the "even though we got a rev, we have no
pending objects" case, which are globs.
- the tests check for the oid of a missing object, which it's pretty
clear --ignore-missing should ignore. You can see the same behavior
with "--ignore-missing a-ref-that-does-not-exist", because
--ignore-missing treats them both the same. That's perhaps less
clearly correct, and we may want to change that in the future. But
the way the code and tests here are written, we'd continue to do the
right thing even if it does.
Reported-by: Bryan Turner <bturner@atlassian.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Earlier, to countermand the implicit "-m" option when the
"--first-parent" option is used with "git log", we added the
"--[no-]diff-merges" option in the jk/log-fp-implies-m topic. To
leave the door open to allow the "--diff-merges" option to take
values that instructs how patches for merge commits should be
computed (e.g. "cc"? "-p against first parent?"), redefine
"--diff-merges" to take non-optional value, and implement "off"
that means the same thing as "--no-diff-merges".
* so/log-diff-merges-opt:
t/t4013: add test for --diff-merges=off
doc/git-log: describe --diff-merges=off
revision: change "--diff-merges" option to require parameter
|
|
"git log --first-parent -p" showed patches only for single-parent
commits on the first-parent chain; the "--first-parent" option has
been made to imply "-m". Use "--no-diff-merges" to restore the
previous behaviour to omit patches for merge commits.
* jk/log-fp-implies-m:
doc/git-log: clarify handling of merge commit diffs
doc/git-log: move "-t" into diff-options list
doc/git-log: drop "-r" diff option
doc/git-log: move "Diff Formatting" from rev-list-options
log: enable "-m" automatically with "--first-parent"
revision: add "--no-diff-merges" option to counteract "-m"
log: drop "--cc implies -m" logic
|
|
"git bisect" learns the "--first-parent" option to find the first
breakage along the first-parent chain.
* al/bisect-first-parent:
bisect: combine args passed to find_bisection()
bisect: introduce first-parent flag
cmd_bisect__helper: defer parsing no-checkout flag
rev-list: allow bisect and first-parent flags
t6030: modernize "git bisect run" tests
|
|
--diff-merges=off is the only accepted form for now, a synonym for
--no-diff-merges.
This patch is a preparation for adding more values, as well as supporting
--diff-merges=<parent>, where <parent> is single parent number to output diff
against.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Error message fix.
* so/rev-parser-errormessage-fix:
revision: fix die() message for "--unpacked="
|
|
Small fixes and workarounds.
* jk/compiler-fixes-and-workarounds:
revision: avoid leak when preparing bloom filter for "/"
revision: avoid out-of-bounds read/write on empty pathspec
config: work around gcc-10 -Wstringop-overflow warning
|
|
The argv_array API is useful for not just managing argv but any
"vector" (NULL-terminated array) of strings, and has seen adoption
to a certain degree. It has been renamed to "strvec" to reduce the
barrier to adoption.
* jk/strvec:
strvec: rename struct fields
strvec: drop argv_array compatibility layer
strvec: update documention to avoid argv_array
strvec: fix indentation in renamed calls
strvec: convert remaining callers away from argv_array name
strvec: convert more callers away from argv_array name
strvec: convert builtin/ callers away from argv_array name
quote: rename sq_dequote_to_argv_array to mention strvec
strvec: rename files from argv-array to strvec
argv-array: rename to strvec
argv-array: use size_t for count and alloc
|
|
Add first_parent_only parameter to find_bisection(), removing the
barrier that prevented combining the --bisect and --first-parent flags
when using git rev-list
Based-on-patch-by: Tiago Botelho <tiagonbotelho@hotmail.com>
Signed-off-by: Aaron Lipman <alipman88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Get rid of the trailing dot and mark for translation.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we're given an empty pathspec, we refuse to set up bloom filters, as
described in f3c2a36810 (revision: empty pathspecs should not use Bloom
filters, 2020-07-01).
But before the empty string check, we drop any trailing slash by
allocating a new string without it. So a pathspec consisting only of "/"
will allocate that string, but then still cause us to bail, leaking the
new string. Let's make sure to free it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Running t4216 with ASan results in it complaining of an out-of-bounds
read in prepare_to_use_bloom_filter(). The issue is this code to strip a
trailing slash:
last_index = pi->len - 1;
if (pi->match[last_index] == '/') {
because we have no guarantee that pi->len isn't zero. This can happen if
the pathspec is ".", as we translate that to an empty string. And if
that read of random memory does trigger the conditional, we'd then do an
out-of-bounds write:
path_alloc = xstrdup(pi->match);
path_alloc[last_index] = '\0';
Let's make sure to check the length before subtracting. Note that for an
empty pathspec, we'd end up bailing from the function a few lines later,
which makes it tempting to just:
if (!pi->len)
return;
early here. But our code here is stripping a trailing slash, and we need
to check for emptiness after stripping that slash, too. So we'd have two
blocks, which would require repeating some cleanup code.
Instead, just skip the trailing-slash for an empty string. Setting
last_index at all in the case is awkward since it will have a nonsense
value (and it uses an "int", which is a too-small type for a string
anyway). So while we're here, let's:
- drop last_index entirely; it's only used in two spots right next to
each other and writing out "pi->len - 1" in both is actually easier
to follow
- use xmemdupz() to duplicate the string. This is slightly more
efficient, but more importantly makes the intent more clear by
allocating the correct-sized substring in the first place. It also
eliminates any question of whether path_alloc is as long as
pi->match (which it would not be if pi->match has any embedded NULs,
though in practice this is probably impossible).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "argc" and "argv" names made sense when the struct was argv_array,
but now they're just confusing. Let's rename them to "nr" (which we use
for counts elsewhere) and "v" (which is rather terse, but reads well
when combined with typical variable names like "args.v").
Note that we have to update all of the callers immediately. Playing
tricks with the preprocessor is hard here, because we wouldn't want to
rewrite unrelated tokens.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Updates to the changed-paths bloom filter.
* ds/commit-graph-bloom-updates:
commit-graph: check all leading directories in changed path Bloom filters
revision: empty pathspecs should not use Bloom filters
revision.c: fix whitespace
commit-graph: check chunk sizes after writing
commit-graph: simplify chunk writes into loop
commit-graph: unify the signatures of all write_graph_chunk_*() functions
commit-graph: persist existence of changed-paths
bloom: fix logic in get_bloom_filter()
commit-graph: change test to die on parse, not load
commit-graph: place bloom_settings in context
|
|
The changed-path Bloom filter is improved using ideas from an
independent implementation.
* sg/commit-graph-cleanups:
commit-graph: simplify write_commit_graph_file() #2
commit-graph: simplify write_commit_graph_file() #1
commit-graph: simplify parse_commit_graph() #2
commit-graph: simplify parse_commit_graph() #1
commit-graph: clean up #includes
diff.h: drop diff_tree_oid() & friends' return value
commit-slab: add a function to deep free entries on the slab
commit-graph-format.txt: all multi-byte numbers are in network byte order
commit-graph: fix parsing the Chunk Lookup table
tree-walk.c: don't match submodule entries for 'submod/anything'
|
|
The "-m" option sets revs->ignore_merges to "0", but there's no way to
undo it. This probably isn't something anybody overly cares about, since
"1" is already the default, but it will serve as an escape hatch when we
flip the default for ignore_merges to "0" in more situations.
We'll also add a few extra niceties:
- initialize the value to "-1" to indicate "not set", and then resolve
it to the normal 0/1 bool in setup_revisions(). This lets any tweak
functions, as well as setup_revisions() itself, avoid clobbering the
user's preference (which until now they couldn't actually express).
- since we now have --no-diff-merges, let's add the matching
--diff-merges, which is just a synonym for "-m". Then we don't even
need to document --no-diff-merges separately; it countermands the
long form of "-m" in the usual way.
The new test shows that this behaves just the same as the current
behavior without "-m".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts all of the remaining files, as the resulting diff is
reasonably sized.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
We'll deal with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This requires updating #include lines across the code-base, but that's
all fairly mechanical, and was done with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe 's/argv-array.h/strvec.h/'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git log -Lx,y:path --before=date" lost track of where the range
should be because it didn't take the changes made by the youngest
commits that are omitted from the output into account.
* rs/line-log-until:
revision: disable min_age optimization with line-log
|
|
API cleanup for get_worktrees()
* es/get-worktrees-unsort:
worktree: drop get_worktrees() unused 'flags' argument
worktree: drop get_worktrees() special-purpose sorting option
|
|
If one of the options --before, --min-age or --until is given,
limit_list() filters out younger commits early on. Line-log needs all
those commits to trace the movement of line ranges, though. Skip this
optimization if both are used together.
Reported-by: Мария Долгополова <dolgopolovamariia@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The file 'dir/subdir/file' can only be modified if its leading
directories 'dir' and 'dir/subdir' are modified as well.
So when checking modified path Bloom filters looking for commits
modifying a path with multiple path components, then check not only
the full path in the Bloom filters, but all its leading directories as
well. Take care to check these paths in "deepest first" order,
because it's the full path that is least likely to be modified, and
the Bloom filter queries can short circuit sooner.
This can significantly reduce the average false positive rate, by
about an order of magnitude or three(!), and can further speed up
pathspec-limited revision walks. The table below compares the average
false positive rate and runtime of
git rev-list HEAD -- "$path"
before and after this change for 5000+ randomly* selected paths from
each repository:
Average false Average Average
positive rate runtime runtime
before after before after difference
------------------------------------------------------------------
git 3.220% 0.7853% 0.0558s 0.0387s -30.6%
linux 2.453% 0.0296% 0.1046s 0.0766s -26.8%
tensorflow 2.536% 0.6977% 0.0594s 0.0420s -29.2%
*Path selection was done with the following pipeline:
git ls-tree -r --name-only HEAD | sort -R | head -n 5000
The improvements in runtime are much smaller than the improvements in
average false positive rate, as we are clearly reaching diminishing
returns here. However, all these timings depend on that accessing
tree objects is reasonably fast (warm caches). If we had a partial
clone and the tree objects had to be fetched from a promisor remote,
e.g.:
$ git clone --filter=tree:0 --bare file://.../webkit.git webkit.notrees.git
$ git -C webkit.git -c core.modifiedPathBloomFilters=1 \
commit-graph write --reachable
$ cp webkit.git/objects/info/commit-graph webkit.notrees.git/objects/info/
$ git -C webkit.notrees.git -c core.modifiedPathBloomFilters=1 \
rev-list HEAD -- "$path"
then checking all leading path component can reduce the runtime from
over an hour to a few seconds (and this is with the clone and the
promisor on the same machine).
This adjusts the tracing values in t4216-log-bloom.sh, which provides a
concrete way to notice the improvement.
Helped-by: Taylor Blau <me@ttaylorr.com>
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The prepare_to_use_bloom_filter() method was not intended to be called
on an empty pathspec. However, 'git log -- .' and 'git log' are subtly
different: the latter reports all commits while the former will simplify
commits that do not change the root tree.
This means that the path used to construct the bloom_key might be empty,
and that value is not added to the Bloom filter during construction.
That means that the results are likely incorrect!
To resolve the issue, be careful about the length of the path and stop
filling Bloom filters. To be completely sure we do not use them, drop
the pointer to the bloom_filter_settings from the commit-graph. That
allows our test to look at the trace2 logs to verify no Bloom filter
statistics are reported.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Here, four spaces were used instead of tab characters.
Reported-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The get_bloom_filter() method is a bit complicated in some parts where
it does not need to be. In particular, it needs to return a NULL filter
only when compute_if_not_present is zero AND the filter data cannot be
loaded from a commit-graph file. This currently happens by accident
because the commit-graph does not load changed-path Bloom filters from
an existing commit-graph when writing a new one. This will change in a
later patch.
Also clean up some style issues while we are here.
One side-effect of returning a NULL filter is that the filters that are
reported as "too large" will now be reported as NULL insead of length
zero. This case was not properly covered before, so add a test. Further,
remote the counting of the zero-length filters from revision.c and the
trace2 logs.
Helped-by: René Scharfe <l.s.r@web.de>
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is needed when repo_init_revisions() is called with a repository
that is not the_repository to ensure appropriate repository is used
in repo_parse_commit_internal(). If the wrong repository is used,
a fatal error is the commit-graph machinery occurs:
fatal: invalid commit position. commit-graph is likely corrupt
Since revision.c was the only user of the parse_commit_gently
compatibility define, remove it from commit.h.
Signed-off-by: Michael Forney <mforney@mforney.org>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
get_worktrees() accepts a 'flags' argument, however, there are no
existing flags (the lone flag GWT_SORT_LINKED was recently retired) and
no behavior which can be tweaked. Therefore, drop the 'flags' argument.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In an earlier patch, multiple struct acccesses to `graph_pos` and
`generation` were auto-converted to multiple method calls.
Since the values are fixed and commit-slab access costly, we would be
better off with storing the values as a local variable and reusing it.
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We remove members `graph_pos` and `generation` from the struct commit.
The default assignments in init_commit_node() are no longer valid,
which is fine as the slab helpers return appropriate default values and
the assignments are removed.
We will replace existing use of commit->generation and commit->graph_pos
by commit_graph_data_slab helpers using
`contrib/coccinelle/commit.cocci'.
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git log -L..." now takes advantage of the "which paths are touched
by this commit?" info stored in the commit-graph system.
* ds/line-log-on-bloom:
line-log: integrate with changed-path Bloom filters
line-log: try to use generation number-based topo-ordering
line-log: more responsive, incremental 'git log -L'
t4211-line-log: add tests for parent oids
line-log: remove unused fields from 'struct line_log_data'
|
|
ll_diff_tree_oid() has only ever returned 0 [1], so it's return value
is basically useless. It's only caller diff_tree_oid() has only ever
returned the return value of ll_diff_tree_oid() as-is [2], so its
return value is just as useless. Most of diff_tree_oid()'s callers
simply ignore its return value, except:
- diff_root_tree_oid() is a thin wrapper around diff_tree_oid() and
returns with its return value, but all of diff_root_tree_oid()'s
callers ignore its return value.
- rev_compare_tree() and rev_same_tree_as_empty() do look at the
return value in a condition, but, since the return value is always
0, the former's < 0 condition is never fulfilled, while the
latter's >= 0 condition is always fulfilled.
So let's drop the return value of ll_diff_tree_oid(), diff_tree_oid()
and diff_root_tree_oid(), and drop those conditions from
rev_compare_tree() and rev_same_tree_as_empty() as well.
[1] ll_diff_tree_oid() and its ancestors have been returning only 0
ever since it was introduced as diff_tree() in 9174026cfe (Add
"diff-tree" program to show which files have changed between two
trees., 2005-04-09).
[2] diff_tree_oid() traces back to diff-tree.c:main() in 9174026cfe as
well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous changes to the line-log machinery focused on making the
first result appear faster. This was achieved by no longer walking the
entire commit history before returning the early results. There is still
another way to improve the performance: walk most commits much faster.
Let's use the changed-path Bloom filters to reduce time spent computing
diffs.
Since the line-log computation requires opening blobs and checking the
content-diff, there is still a lot of necessary computation that cannot
be replaced with changed-path Bloom filters. The part that we can reduce
is most effective when checking the history of a file that is deep in
several directories and those directories are modified frequently. In
this case, the computation to check if a commit is TREESAME to its first
parent takes a large fraction of the time. That is ripe for improvement
with changed-path Bloom filters.
We must ensure that prepare_to_use_bloom_filters() is called in
revision.c so that the bloom_filter_settings are loaded into the struct
rev_info from the commit-graph. Of course, some cases are still
forbidden, but in the line-log case the pathspec is provided in a
different way than normal.
Since multiple paths and segments could be requested, we compute the
struct bloom_key data dynamically during the commit walk. This could
likely be improved, but adds code complexity that is not valuable at
this time.
There are two cases to care about: merge commits and "ordinary" commits.
Merge commits have multiple parents, but if we are TREESAME to our first
parent in every range, then pass the blame for all ranges to the first
parent. Ordinary commits have the same condition, but each is done
slightly differently in the process_ranges_[merge|ordinary]_commit()
methods. By checking if the changed-path Bloom filter can guarantee
TREESAME, we can avoid that tree-diff cost. If the filter says "probably
changed", then we need to run the tree-diff and then the blob-diff if
there was a real edit.
The Linux kernel repository is a good testing ground for the performance
improvements claimed here. There are two different cases to test. The
first is the "entire history" case, where we output the entire history
to /dev/null to see how long it would take to compute the full line-log
history. The second is the "first result" case, where we find how long
it takes to show the first value, which is an indicator of how quickly a
user would see responses when waiting at a terminal.
To test, I selected the paths that were changed most frequently in the
top 10,000 commits using this command (stolen from StackOverflow [1]):
git log --pretty=format: --name-only -n 10000 | sort | \
uniq -c | sort -rg | head -10
which results in
121 MAINTAINERS
63 fs/namei.c
60 arch/x86/kvm/cpuid.c
59 fs/io_uring.c
58 arch/x86/kvm/vmx/vmx.c
51 arch/x86/kvm/x86.c
45 arch/x86/kvm/svm.c
42 fs/btrfs/disk-io.c
42 Documentation/scsi/index.rst
(along with a bogus first result). It appears that the path
arch/x86/kvm/svm.c was renamed, so we ignore that entry. This leaves the
following results for the real command time:
| | Entire History | First Result |
| Path | Before | After | Before | After |
|------------------------------|--------|--------|--------|--------|
| MAINTAINERS | 4.26 s | 3.87 s | 0.41 s | 0.39 s |
| fs/namei.c | 1.99 s | 0.99 s | 0.42 s | 0.21 s |
| arch/x86/kvm/cpuid.c | 5.28 s | 1.12 s | 0.16 s | 0.09 s |
| fs/io_uring.c | 4.34 s | 0.99 s | 0.94 s | 0.27 s |
| arch/x86/kvm/vmx/vmx.c | 5.01 s | 1.34 s | 0.21 s | 0.12 s |
| arch/x86/kvm/x86.c | 2.24 s | 1.18 s | 0.21 s | 0.14 s |
| fs/btrfs/disk-io.c | 1.82 s | 1.01 s | 0.06 s | 0.05 s |
| Documentation/scsi/index.rst | 3.30 s | 0.89 s | 1.46 s | 0.03 s |
It is worth noting that the least speedup comes for the MAINTAINERS file
which is
* edited frequently,
* low in the directory heirarchy, and
* quite a large file.
All of those points lead to spending more time doing the blob diff and
less time doing the tree diff. Still, we see some improvement in that
case and significant improvement in other cases. A 2-4x speedup is
likely the more typical case as opposed to the small 5% change for that
file.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous patch made it possible to perform line-level filtering
during history traversal instead of in an expensive preprocessing
step, but it still requires some simpler preprocessing steps, notably
topo-ordering. However, nowadays we have commit-graphs storing
generation numbers, which make it possible to incrementally traverse
the history in topological order, without the preparatory limit_list()
and sort_in_topological_order() steps; see b45424181e (revision.c:
generation-based topo-order algorithm, 2018-11-01).
This patch combines the two, so we can do both the topo-ordering and
the line-level filtering during history traversal, eliminating even
those simpler preprocessing steps, and thus further reducing the delay
before showing the first commit modifying the given line range.
The 'revs->limited' flag plays the central role in this, because, due
to limitations of the current implementation, the generation
number-based topo-ordering is only enabled when this flag remains
unset. Line-level log, however, always sets this flag in
setup_revisions() ever since the feature was introduced in 12da1d1f6f
(Implement line-history search (git log -L), 2013-03-28). The reason
for setting 'limited' is unclear, though, because the line-level log
itself doesn't directly depend on it, and it doesn't affect how the
limit_list() function limits the revision range. However, there is an
indirect dependency: the line-level log requires topo-ordering, and
the "traditional" sort_in_topological_order() requires an already
limited commit list since e6c3505b44 (Make sure we generate the whole
commit list before trying to sort it topologically, 2005-07-06). The
new, generation numbers-based topo-ordering doesn't require a limited
commit list anymore.
So don't set 'revs->limited' for line-level log, unless it is really
necessary, namely:
- The user explicitly requested parent rewriting, because that is
still done in the line_log_filter() preprocessing step (see
previous patch), which requires sort_in_topological_order() and in
turn limit_list() as well.
- A commit-graph file is not available or it doesn't yet contain
generation numbers. In these cases we had to fall back on
sort_in_topological_order() and in turn limit_list(). The
existing condition with generation_numbers_enabled() has already
ensured that the 'limited' flag is set in these cases; this patch
just makes sure that the line-level log sets 'revs->topo_order'
before that condition.
While the reduced delay before showing the first commit is measurable
in git.git, it takes a bigger repository to make it clearly noticable.
In both cases below the line ranges were chosen so that they were
modified rather close to the starting revisions, so the effect of this
change is most noticable.
# git.git
$ time git --no-pager log -L:read_alternate_refs:sha1-file.c -1 v2.23.0
Before:
real 0m0.107s
user 0m0.091s
sys 0m0.013s
After:
real 0m0.058s
user 0m0.050s
sys 0m0.005s
# linux.git
$ time git --no-pager log \
-L:build_restore_work_registers:arch/mips/mm/tlbex.c -1 v5.2
Before:
real 0m1.129s
user 0m1.061s
sys 0m0.069s
After:
real 0m0.096s
user 0m0.087s
sys 0m0.009s
Additional testing by Derrick Stolee: Since this patch improves
the performance for the first result, I repeated the experiment
from the previous patch on the Linux kernel repository, reporting
real time here:
Command: git log -L 100,200:MAINTAINERS -n 1 >/dev/null
Before: 0.71 s
After: 0.05 s
Now, we have dropped the full topo-order of all ~910,000 commits
before reporting the first result. The remaining performance
improvements then are:
1. Update the parent-rewriting logic to be incremental similar to
how "git log --graph" behaves.
2. Use changed-path Bloom filters to reduce the time spend in the
tree-diff to see if the path(s) changed.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current line-level log implementation performs a preprocessing
step in prepare_revision_walk(), during which the line_log_filter()
function filters and rewrites history to keep only commits modifying
the given line range. This preprocessing affects both responsiveness
and correctness:
- Git doesn't produce any output during this preprocessing step.
Checking whether a commit modified the given line range is
somewhat expensive, so depending on the size of the given revision
range this preprocessing can result in a significant delay before
the first commit is shown.
- Limiting the number of displayed commits (e.g. 'git log -3 -L...')
doesn't limit the amount of work during preprocessing, because
that limit is applied during history traversal. Alas, by that
point this expensive preprocessing step has already churned
through the whole revision range to find all commits modifying the
revision range, even though only a few of them need to be shown.
- It rewrites parents, with no way to turn it off. Without the user
explicitly requesting parent rewriting any parent object ID shown
should be that of the immediate parent, just like in case of a
pathspec-limited history traversal without parent rewriting.
However, after that preprocessing step rewrote history, the
subsequent "regular" history traversal (i.e. get_revision() in a
loop) only sees commits modifying the given line range.
Consequently, it can only show the object ID of the last ancestor
that modified the given line range (which might happen to be the
immediate parent, but many-many times it isn't).
This patch addresses both the correctness and, at least for the common
case, the responsiveness issues by integrating line-level log
filtering into the regular revision walking machinery:
- Make process_ranges_arbitrary_commit(), the static function in
'line-log.c' deciding whether a commit modifies the given line
range, public by removing the static keyword and adding the
'line_log_' prefix, so it can be called from other parts of the
revision walking machinery.
- If the user didn't explicitly ask for parent rewriting (which, I
believe, is the most common case):
- Call this now-public function during regular history traversal,
namely from get_commit_action() to ignore any commits not
modifying the given line range.
Note that while this check is relatively expensive, it must be
performed before other, much cheaper conditions, because the
tracked line range must be adjusted even when the commit will
end up being ignored by other conditions.
- Skip the line_log_filter() call, i.e. the expensive
preprocessing step, in prepare_revision_walk(), because, thanks
to the above points, the revision walking machinery is now able
to filter out commits not modifying the given line range while
traversing history.
This way the regular history traversal sees the unmodified
history, and is therefore able to print the object ids of the
immediate parents of the listed commits. The eliminated
preprocessing step can greatly reduce the delay before the first
commit is shown, see the numbers below.
- However, if the user did explicitly ask for parent rewriting via
'--parents' or a similar option, then stick with the current
implementation for now, i.e. perform that expensive filtering and
history rewriting in the preprocessing step just like we did
before, leaving the initial delay as long as it was.
I tried to integrate line-level log filtering with parent rewriting
into the regular history traversal, but, unfortunately, several
subtleties resisted... :) Maybe someday we'll figure out how to do
that, but until then at least the simple and common (i.e. without
parent rewriting) 'git log -L:func:file' commands can benefit from the
reduced delay.
This change makes the failing 'parent oids without parent rewriting'
test in 't4211-line-log.sh' succeed.
The reduced delay is most noticable when there's a commit modifying
the line range near the tip of a large-ish revision range:
# no parent rewriting requested, no commit-graph present
$ time git --no-pager log -L:read_alternate_refs:sha1-file.c -1 v2.23.0
Before:
real 0m9.570s
user 0m9.494s
sys 0m0.076s
After:
real 0m0.718s
user 0m0.674s
sys 0m0.044s
A significant part of the remaining delay is spent reading and parsing
commit objects in limit_list(). With the help of the commit-graph we
can eliminate most of that reading and parsing overhead, so here are
the timing results of the same command as above, but this time using
the commit-graph:
Before:
real 0m8.874s
user 0m8.816s
sys 0m0.057s
After:
real 0m0.107s
user 0m0.091s
sys 0m0.013s
The next patch will further reduce the remaining delay.
To be clear: this patch doesn't actually optimize the line-level log,
but merely moves most of the work from the preprocessing step to the
history traversal, so the commits modifying the line range can be
shown as soon as they are processed, and the traversal can be
terminated as soon as the given number of commits are shown.
Consequently, listing the full history of a line range, potentially
all the way to the root commit, will take the same time as before (but
at least the user might start reading the output earlier).
Furthermore, if the most recent commit modifying the line range is far
away from the starting revision, then that initial delay will still be
significant.
Additional testing by Derrick Stolee: In the Linux kernel repository,
the MAINTAINERS file was changed ~3,500 times across the ~915,000
commits. In addition to that edit frequency, the file itself is quite
large (~18,700 lines). This means that a significant portion of the
computation is taken up by computing the patch-diff of the file. This
patch improves the real time it takes to output the first result quite
a bit:
Command: git log -L 100,200:MAINTAINERS -n 1 >/dev/null
Before: 3.88 s
After: 0.71 s
If we drop the "-n 1" in the command, then there is no change in
end-to-end process time. This is because the command still needs to
walk the entire commit history, which negates the point of this
patch. This is expected.
As a note for future reference, the ~4.3 seconds in the old code
spends ~2.6 seconds computing the patch-diffs, and the rest of the
time is spent walking commits and computing diffs for which paths
changed at each commit. The changed-path Bloom filters could improve
the end-to-end computation time (i.e. no "-n 1" in the command).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
