| Age | Commit message (Collapse) | Author |
|---|
|
With roughly 800 remotes all fetching into their own
refs/remotes/$REMOTE/* island, the connectivity check[1] gets
expensive for each fetch on systems which lack sufficient RAM to
cache objects.
To do a no-op fetch on one $REMOTE out of hundreds, hideRefs now
allows the no-op fetch to take ~30 seconds instead of ~20 minutes
on a noisy, RAM-constrained machine (localhost, so no network latency):
git -c fetch.hideRefs=refs \
-c fetch.hideRefs='!refs/remotes/$REMOTE/' \
fetch $REMOTE
[1] `git rev-list --objects --stdin --not --all --quiet --alternate-refs'
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The for_each_{loose,packed}_object interface uses callback functions,
but not every callback needs all of the parameters. Mark the unused ones
to satisfy -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both the object_array_filter() and trie_find() functions use callback
functions that let the caller specify which elements match. These
callbacks take a void pointer in case the caller wants to pass in extra
data. But in each case, the single user of these functions just passes
NULL, and the callback ignores the extra pointer.
We could just remove these unused parameters from the callback interface
entirely. But it's good practice to provide such a pointer, as it guides
future callers of the function in the right direction (rather than
tempting them to access global data). Plus it's consistent with other
generic callback interfaces.
So let's instead annotate the unused parameters, in order to silence the
compiler's -Wunused-parameter warning.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This allows us to replace includes of cache.h with includes of the much
smaller alloc.h in many places. It does mean that we also need to add
includes of alloc.h in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the "repo" member was added to "the_index" in [1] the
repo_read_index() was made to populate it, but the unpopulated
"the_index" variable didn't get the same treatment.
Let's do that in initialize_the_repository() when we set it up, and
likewise for all of the current callers initialized an empty "struct
index_state".
This simplifies code that needs to deal with "the_index" or a custom
"struct index_state", we no longer need to second-guess this part of
the "index_state" deep in the stack. A recent example of such
second-guessing is the "istate->repo ? istate->repo : the_repository"
code in [2]. We can now simply use "istate->repo".
We're doing this by making use of the INDEX_STATE_INIT() macro (and
corresponding function) added in [3], which now have mandatory "repo"
arguments.
Because we now call index_state_init() in repository.c's
initialize_the_repository() we don't need to handle the case where we
have a "repo->index" whose "repo" member doesn't match the "repo"
we're setting up, i.e. the "Complete the double-reference" code in
repo_read_index() being altered here. That logic was originally added
in [1], and was working around the lack of what we now have in
initialize_the_repository().
For "fsmonitor-settings.c" we can remove the initialization of a NULL
"r" argument to "the_repository". This was added back in [4], and was
needed at the time for callers that would pass us the "r" from an
"istate->repo". Before this change such a change to
"fsmonitor-settings.c" would segfault all over the test suite (e.g. in
t0002-gitfile.sh).
This change has wider eventual implications for
"fsmonitor-settings.c". The reason the other lazy loading behavior in
it is required (starting with "if (!r->settings.fsmonitor) ..." is
because of the previously passed "r" being "NULL".
I have other local changes on top of this which move its configuration
reading to "prepare_repo_settings()" in "repo-settings.c", as we could
now start to rely on it being called for our "r". But let's leave all
of that for now, and narrowly remove this particular part of the
lazy-loading.
1. 1fd9ae517c4 (repository: add repo reference to index_state,
2021-01-23)
2. ee1f0c242ef (read-cache: add index.skipHash config option,
2023-01-06)
3. 2f6b1eb794e (cache API: add a "INDEX_STATE_INIT" macro/function,
add release_index(), 2023-01-12)
4. 1e0ea5c4316 (fsmonitor: config settings are repository-specific,
2022-03-25)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Hopefully in some not so distant future, we'll get advantages from always
initializing the "repo" member of the "struct index_state". To make
that easier let's introduce an initialization macro & function.
The various ad-hoc initialization of the structure can then be changed
over to it, and we can remove the various "0" assignments in
discard_index() in favor of calling index_state_init() at the end.
While not strictly necessary, let's also change the CALLOC_ARRAY() of
various "struct index_state *" to use an ALLOC_ARRAY() followed by
index_state_init() instead.
We're then adding the release_index() function and converting some
callers (including some of these allocations) over to it if they
either won't need to use their "struct index_state" again, or are just
about to call index_state_init().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up around unused function parameters.
* jk/unused-post-2.39:
userdiff: mark unused parameter in internal callback
list-objects-filter: mark unused parameters in virtual functions
diff: mark unused parameters in callbacks
xdiff: mark unused parameter in xdl_call_hunk_func()
xdiff: drop unused parameter in def_ff()
ws: drop unused parameter from ws_blank_line()
list-objects: drop process_gitlink() function
blob: drop unused parts of parse_blob_buffer()
ls-refs: use repository parameter to iterate refs
|
|
Various leak fixes.
* ab/various-leak-fixes:
built-ins: use free() not UNLEAK() if trivial, rm dead code
revert: fix parse_options_concat() leak
cherry-pick: free "struct replay_opts" members
rebase: don't leak on "--abort"
connected.c: free the "struct packed_git"
sequencer.c: fix "opts->strategy" leak in read_strategy_opts()
ls-files: fix a --with-tree memory leak
revision API: call graph_clear() in release_revisions()
unpack-file: fix ancient leak in create_temp_file()
built-ins & libs & helpers: add/move destructors, fix leaks
dir.c: free "ident" and "exclude_per_dir" in "struct untracked_cache"
read-cache.c: clear and free "sparse_checkout_patterns"
commit: discard partial cache before (re-)reading it
{reset,merge}: call discard_index() before returning
tests: mark tests as passing with SANITIZE=leak
|
|
The diff code provides a format_callback interface, but not every
callback needs each parameter (e.g., the "opt" and "data" parameters are
frequently left unused). Likewise for the output_prefix callback, the
low-level change/add_remove interfaces, the callbacks used by
xdi_diff(), etc.
Mark unused arguments in the callback implementations to quiet
-Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git receive-pack" used to use all the local refs as the boundary for
checking connectivity of the data "git push" sent, but now it uses
only the refs that it advertised to the pusher. In a repository with
the .hideRefs configuration, this reduces the resources needed to
perform the check.
cf. <221028.86bkpw805n.gmgdl@evledraar.gmail.com>
cf. <xmqqr0yrizqm.fsf@gitster.g>
* ps/receive-use-only-advertised:
receive-pack: only use visible refs for connectivity check
rev-parse: add `--exclude-hidden=` option
revision: add new parameter to exclude hidden refs
revision: introduce struct to handle exclusions
revision: move together exclusion-related functions
refs: get rid of global list of hidden refs
refs: fix memory leak when parsing hideRefs config
|
|
Call graph_clear() in release_revisions(), this will free memory
allocated by e.g. this command, which will now run without memory
leaks:
git -P log -1 --graph --no-graph --graph
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
Users can optionally hide refs from remote users in git-upload-pack(1),
git-receive-pack(1) and others via the `transfer.hideRefs`, but there is
not an easy way to obtain the list of all visible or hidden refs right
now. We'll require just that though for a performance improvement in our
connectivity check.
Add a new option `--exclude-hidden=` that excludes any hidden refs from
the next pseudo-ref like `--all` or `--branches`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
The functions that handle exclusion of refs work on a single string
list. We're about to add a second mechanism for excluding refs though,
and it makes sense to reuse much of the same architecture for both kinds
of exclusion.
Introduce a new `struct ref_exclusions` that encapsulates all the logic
related to excluding refs and move the `struct string_list` that holds
all wildmatch patterns of excluded refs into it. Rename functions that
operate on this struct to match its name.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
Move together the definitions of functions that handle exclusions of
refs so that related functionality sits in a single place, only.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
Have the REV_INFO_INIT macro added in [1] declare more members of
"struct rev_info" that we can initialize statically, and have
repo_init_revisions() do so with the memcpy(..., &blank) idiom
introduced in [2].
As the comment for the "REV_INFO_INIT" macro notes this still isn't
sufficient to initialize a "struct rev_info" for use yet. But we are
getting closer to that eventual goal.
Even though we can't fully initialize a "struct rev_info" with
REV_INFO_INIT it's useful for readability to clearly separate those
things that we can statically initialize, and those that we can't.
This change could replace the:
list_objects_filter_init(&revs->filter);
In the repo_init_revisions() with this line, at the end of the
REV_INFO_INIT deceleration in revisions.h:
.filter = LIST_OBJECTS_FILTER_INIT, \
But doing so would produce a minor conflict with an outstanding
topic[3]. Let's skip that for now. I have follow-ups to initialize
more of this statically, e.g. changes to get rid of grep_init(). We
can initialize more members with the macro in a future series.
1. f196c1e908d (revisions API users: use release_revisions() needing
REV_INFO_INIT, 2022-04-13)
2. 5726a6b4012 (*.c *_init(): define in terms of corresponding *_INIT
macro, 2021-07-01)
3. https://lore.kernel.org/git/265b292ed5c2de19b7118dfe046d3d9d932e2e89.1667901510.git.ps@pks.im/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
"git diff rev^!" did not show combined diff to go to the rev from
its parents.
* rs/diff-caret-bang-with-parents:
diff: support ^! for merges
revisions.txt: unspecify order of resolved parts of ^!
revision: use strtol_i() for exclude_parent
|
|
Since 44ba10d6712 (revision: use C99 declaration of variable in for()
loop, 2021-11-14) released with v2.35.0 we've had a variable declared
with in a for loop.
Since then we've had inadvertent follow-ups to that with at least
cb2607759e2 (merge-ort: store more specific conflict information,
2022-06-18) released with v2.38.0.
As November 2022 is within the window of this upcoming release,
let's update the guideline to allow this. We can have the promised
"revisit" discussion while this patch cooks, and drop it if it turns
out that it is still premature, which is not expected to happen at
this moment.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Avoid silent overflow of the int exclude_parent by using the appropriate
function, strtol_i(), to parse its value.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A couple of bugfixes with code clean-up.
* jk/list-objects-filter-cleanup:
list-objects-filter: convert filter_spec to a strbuf
list-objects-filter: add and use initializers
list-objects-filter: handle null default filter spec
list-objects-filter: don't memset after releasing filter struct
|
|
Undoes 'jk/unused-annotation' topic and redoes it to work around
Coccinelle rules misfiring false positives in unrelated codepaths.
* ab/unused-annotation:
git-compat-util.h: use "deprecated" for UNUSED variables
git-compat-util.h: use "UNUSED", not "UNUSED(var)"
|
|
Annotate function parameters that are not used (but cannot be
removed for structural reasons), to prepare us to later compile
with -Wunused warning turned on.
* jk/unused-annotation:
is_path_owned_by_current_uid(): mark "report" parameter as unused
run-command: mark unused async callback parameters
mark unused read_tree_recursive() callback parameters
hashmap: mark unused callback parameters
config: mark unused callback parameters
streaming: mark unused virtual method parameters
transport: mark bundle transport_options as unused
refs: mark unused virtual method parameters
refs: mark unused reflog callback parameters
refs: mark unused each_ref_fn parameters
git-compat-util: add UNUSED macro
|
|
"git rev-list --verify-objects" ought to inspect the contents of
objects and notice corrupted ones, but it didn't when the commit
graph is in use, which has been corrected.
* jk/rev-list-verify-objects-fix:
rev-list: disable commit graph with --verify-objects
lookup_commit_in_graph(): use prepare_commit_graph() to check for graph
|
|
In 7e2619d8ff (list_objects_filter_options: plug leak of filter_spec
strings, 2022-09-08), we noted that the filter_spec string_list was
inconsistent in how it handled memory ownership of strings stored in the
list. The fix there was a bit of a band-aid to set the "strdup_strings"
variable right before adding anything.
That works OK, and it lets the users of the API continue to
zero-initialize the struct. But it makes the code a bit hard to follow
and accident-prone, as any other spots appending the filter_spec need to
think about whether to set the strdup_strings value, too (there's one
such spot in partial_clone_get_default_filter_spec(), which is probably
a possible memory leak).
So let's do that full cleanup now. We'll introduce a
LIST_OBJECTS_FILTER_INIT macro and matching function, and use them as
appropriate (though it is for the "_options" struct, this matches the
corresponding list_objects_filter_release() function).
This is harder than it seems! Many other structs, like
git_transport_data, embed the filter struct. So they need to initialize
it themselves even if the rest of the enclosing struct is OK with
zero-initialization. I found all of the relevant spots by grepping
manually for declarations of list_objects_filter_options. And then doing
so recursively for structs which embed it, and ones which embed those,
and so on.
I'm pretty sure I got everything, but there's no change that would alert
the compiler if any topics in flight added new declarations. To catch
this case, we now double-check in the parsing function that things were
initialized as expected and BUG() if appropriate.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the caller told us that they don't care about us checking the object
hash, then we're free to implement any optimizations that get us the
parsed value more quickly. An obvious one is to check the commit graph
before loading an object from disk. And in fact, both of the callers who
pass in this flag are already doing so before they call parse_object()!
So we can simplify those callers, as well as any possible future ones,
by moving the logic into parse_object().
There are two subtle things to note in the diff, but neither has any
impact in practice:
- it seems least-surprising here to do the graph lookup on the
git-replace'd oid, rather than the original. This is in theory a
change of behavior from the earlier code, as neither caller did a
replace lookup itself. But in practice it doesn't matter, as we
disable the commit graph entirely if there are any replace refs.
- the caller in get_reference() passes the skip_hash flag only if
revs->verify_objects isn't set, whereas it would look in the commit
graph unconditionally. In practice this should not matter as we
should disable the commit graph entirely when using verify_objects
(and that was done recently in another patch).
So this should be a pure cleanup with no behavior change.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Imagine we have a history with commit C pointing to a large blob B.
If a client asks us for C, we can generally serve both objects to them
without accessing the uncompressed contents of B. In upload-pack, we
figure out which commits we have and what the client has, and feed those
tips to pack-objects. In pack-objects, we traverse the commits and trees
(or use bitmaps!) to find the set of objects needed, but we never open
up B. When we serve it to the client, we can often pass the compressed
bytes directly from the on-disk packfile over the wire.
But if a client asks us directly for B, perhaps because they are doing
an on-demand fetch to fill in the missing blob of a partial clone, we
end up much slower. Upload-pack calls parse_object() on the oid we
receive, which opens up the object and re-checks its hash (even though
if it were a commit, we might skip this parse entirely in favor of the
commit graph!). And then we feed the oid directly to pack-objects, which
again calls parse_object() and opens the object. And then finally, when
we write out the result, we may send bytes straight from disk, but only
after having unnecessarily uncompressed and computed the sha1 of the
object twice!
This patch teaches both code paths to use the new SKIP_HASH_CHECK flag
for parse_object(). You can see the speed-up in p5600, which does a
blob:none clone followed by a checkout. The savings for git.git are
modest:
Test HEAD^ HEAD
----------------------------------------------------------------------
5600.3: checkout of result 2.23(4.19+0.24) 1.72(3.79+0.18) -22.9%
But the savings scale with the number of bytes. So on a repository like
linux.git with more files, we see more improvement (in both absolute and
relative numbers):
Test HEAD^ HEAD
----------------------------------------------------------------------------
5600.3: checkout of result 51.62(77.26+2.76) 34.86(61.41+2.63) -32.5%
And here's an even more extreme case. This is the android gradle-plugin
repository, whose tip checkout has ~3.7GB of files:
Test HEAD^ HEAD
--------------------------------------------------------------------------
5600.3: checkout of result 79.51(90.84+5.55) 40.28(51.88+5.67) -49.3%
Keep in mind that these timings are of the whole checkout operation. So
they count the client indexing the pack and actually writing out the
files. If we want to see just the server's view, we can hack up the
GIT_TRACE_PACKET output from those operations and replay it via
upload-pack. For the gradle example, that gives me:
Benchmark 1: GIT_PROTOCOL=version=2 git.old upload-pack ../gradle-plugin <input
Time (mean ± σ): 50.884 s ± 0.239 s [User: 51.450 s, System: 1.726 s]
Range (min … max): 50.608 s … 51.025 s 3 runs
Benchmark 2: GIT_PROTOCOL=version=2 git.new upload-pack ../gradle-plugin <input
Time (mean ± σ): 9.728 s ± 0.112 s [User: 10.466 s, System: 1.535 s]
Range (min … max): 9.618 s … 9.842 s 3 runs
Summary
'GIT_PROTOCOL=version=2 git.new upload-pack ../gradle-plugin <input' ran
5.23 ± 0.07 times faster than 'GIT_PROTOCOL=version=2 git.old upload-pack ../gradle-plugin <input'
So a server would see an 80% reduction in CPU serving the initial
checkout of a partial clone for this repository. Or possibly even more
depending on the packing; most of the time spent in the faster one were
objects we had to open during the write phase.
In both cases skipping the extra hashing on the server should be pretty
safe. The client doesn't trust the server anyway, so it will re-hash all
of the objects via index-pack. There is one thing to note, though: the
change in get_reference() affects not just pack-objects, but rev-list,
git-log, etc. We could use a flag to limit to index-pack here, but we
may already skip hash checks in this instance. For commits, we'd skip
anything we load via the commit-graph. And while before this commit we
would check a blob fed directly to rev-list on the command-line, we'd
skip checking that same blob if we found it by traversing a tree.
The exception for both is if --verify-objects is used. In that case,
we'll skip this optimization, and the new test makes sure we do this
correctly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since the point of --verify-objects is to actually load and checksum the
bytes of each object, optimizing out reads using the commit graph runs
contrary to our goal.
The most targeted way to implement this would be for the revision
traversal code to check revs->verify_objects and avoid using the commit
graph. But it's difficult to be sure we've hit all of the correct spots.
For instance, I started this patch by writing the first of the included
test cases, where the corrupted commit is directly on rev-list's command
line. And that is easy to fix by teaching get_reference() to check
revs->verify_objects before calling lookup_commit_in_graph().
But that doesn't cover the second test case: when we traverse to a
corrupted commit, we'd parse the parent in process_parents(). So we'd
need to check there, too. And it keeps going. In handle_commit() we
sometimes parses commits, too, though I couldn't figure out a way to
trigger it that did not already parse via get_reference() or tag
peeling. And try_to_simplify_commit() has its own parse call, and so on.
So it seems like the safest thing is to just disable the commit graph
for the whole process when we see the --verify-objects option. We can do
that either in builtin/rev-list.c, where we use the option, or in
revision.c, where we parse it. There are some subtleties:
- putting it in rev-list.c is less surprising in some ways, because
there we know we are just doing a single traversal. In a command
which does multiple traversals in a single process, it's rather
unexpected to globally disable the commit graph.
- putting it in revision.c is less surprising in some ways, because
the caller does not have to remember to disable the graph
themselves. But this is already tricky! The verify_objects flag in
rev_info doesn't do anything by itself. The caller has to provide an
object callback which does the right thing.
- for that reason, in practice nobody but rev-list uses this option in
the first place. So the distinction is probably not important either
way. Arguably it should just be an option of rev-list, and not the
general revision machinery; right now you can run "git log
--verify-objects", but it does not actually do anything useful.
- checking for a parsed revs.verify_objects flag in rev-list.c is too
late. By that time we've already passed the arguments to
setup_revisions(), which will have parsed the commits using the
graph.
So this commit disables the graph as soon as we see the option in
revision.c. That's a pretty broad hammer, but it does what we want, and
in practice nobody but rev-list is using this flag anyway.
The tests cover both the "tip" and "parent" cases. Obviously our hammer
hits them both in this case, but it's good to check both in case
somebody later tries the more focused approach.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As reported in [1] the "UNUSED(var)" macro introduced in
2174b8c75de (Merge branch 'jk/unused-annotation' into next,
2022-08-24) breaks coccinelle's parsing of our sources in files where
it occurs.
Let's instead partially go with the approach suggested in [2] of
making this not take an argument. As noted in [1] "coccinelle" will
ignore such tokens in argument lists that it doesn't know about, and
it's less of a surprise to syntax highlighters.
This undoes the "help us notice when a parameter marked as unused is
actually use" part of 9b240347543 (git-compat-util: add UNUSED macro,
2022-08-19), a subsequent commit will further tweak the macro to
implement a replacement for that functionality.
1. https://lore.kernel.org/git/220825.86ilmg4mil.gmgdl@evledraar.gmail.com/
2. https://lore.kernel.org/git/220819.868rnk54ju.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Hashmap comparison functions must conform to a particular callback
interface, but many don't use all of their parameters. Especially the
void cmp_data pointer, but some do not use keydata either (because they
can easily form a full struct to pass when doing lookups). Let's mark
these to make -Wunused-parameter happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Functions used with for_each_reflog_ent() need to conform to a
particular interface, but not every function needs all of the
parameters. Mark the unused ones to make -Wunused-parameter happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Functions used with for_each_ref(), etc, need to conform to the
each_ref_fn interface. But most of them don't need every parameter;
let's annotate the unused ones to quiet -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have long allowed users to run e.g.
git log --ancestry-path master..seen
which shows all commits which satisfy all three of these criteria:
* are an ancestor of seen
* are not an ancestor of master
* have master as an ancestor
This commit allows another variant:
git log --ancestry-path=$TOPIC master..seen
which shows all commits which satisfy all of these criteria:
* are an ancestor of seen
* are not an ancestor of master
* have $TOPIC in their ancestry-path
that last bullet can be defined as commits meeting any of these
criteria:
* are an ancestor of $TOPIC
* have $TOPIC as an ancestor
* are $TOPIC
This also allows multiple --ancestry-path arguments, which can be
used to find commits with any of the given topics in their ancestry
path.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Plug a bit more leaks in the revisions API.
* ab/plug-revisions-leak:
revisions API: don't leak memory on argv elements that need free()-ing
bisect.c: partially fix bisect_rev_setup() memory leak
log: refactor "rev.pending" code in cmd_show()
log: fix a memory leak in "git show <revision>..."
test-fast-rebase helper: use release_revisions() (again)
bisect.c: add missing "goto" for release_revisions()
|
|
The resolve-undo information in the index was not protected against
GC, which has been corrected.
source: <xmqq35f7kzad.fsf@gitster.g>
* jc/resolve-undo:
fsck: do not dereference NULL while checking resolve-undo data
revision: mark blobs needed for resolve-undo as reachable
|
|
"git cat-file" learned an option to use the mailmap when showing
commit and tag objects.
* sa/cat-file-mailmap:
cat-file: add mailmap support
ident: rename commit_rewrite_person() to apply_mailmap_to_header()
ident: move commit_rewrite_person() to ident.c
revision: improve commit_rewrite_person()
|
|
Add a "free_removed_argv_elements" member to "struct
setup_revision_opt", and use it to fix several memory leaks.
We have various memory leaks in APIs that take and munge "const
char **argv", e.g. parse_options(). Sometimes these APIs are given the
"argv" we get to the "main" function, in which case we don't leak
memory, but other times we're giving it the "v" member of a "struct
strvec" we created.
There's several potential ways to fix those sort of leaks, we could
add a "nodup" mode to "struct strvec", which would work for the cases
where we push constant strings to it. But that wouldn't work as soon
as we used strvec_pushf(), or otherwise needed to duplicate or create
a string for that "struct strvec".
Let's instead make it the responsibility of the revisions API. If it's
going to clobber elements of argv it can also free() them, which it
will now do if instructed to do so via "free_removed_argv_elements".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The resolve-undo information in the index was not protected against
GC, which has been corrected.
* jc/resolve-undo:
fsck: do not dereference NULL while checking resolve-undo data
revision: mark blobs needed for resolve-undo as reachable
|
|
commit_rewrite_person() takes a commit buffer and replaces the idents
in the header with their canonical versions using the mailmap mechanism.
The name "commit_rewrite_person()" is misleading as it doesn't convey
what kind of rewrite are we going to do to the buffer. It also doesn't
clearly mention that the function will limit itself to the header part
of the buffer. The new name, "apply_mailmap_to_header()", expresses the
functionality of the function pretty clearly.
We intend to use apply_mailmap_to_header() in git-cat-file to replace
idents in the headers of commit and tag object buffers. So, we will be
extending this function to take tag objects buffer as well and replace
idents on the tagger header using the mailmap mechanism.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: John Cai <johncai86@gmail.com>
Signed-off-by: Siddharth Asthana <siddharthasthana31@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
commit_rewrite_person() and rewrite_ident_line() are static functions
defined in revision.c.
Their usages are as follows:
- commit_rewrite_person() takes a commit buffer and replaces the author
and committer idents with their canonical versions using the mailmap
mechanism
- rewrite_ident_line() takes author/committer header lines from the
commit buffer and replaces the idents with their canonical versions
using the mailmap mechanism.
This patch moves commit_rewrite_person() and rewrite_ident_line() to
ident.c which contains many other functions related to idents like
split_ident_line(). By moving commit_rewrite_person() to ident.c, we
also intend to use it in git-cat-file to replace committer and author
idents from the headers to their canonical versions using the mailmap
mechanism. The function is moved as is for now to make it clear that
there are no other changes, but it will be renamed in a following
commit.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: John Cai <johncai86@gmail.com>
Signed-off-by: Siddharth Asthana <siddharthasthana31@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function, commit_rewrite_person(), is designed to find and replace
an ident string in the header part, and the way it avoids a random
occurrence of "author A U Thor <author@example.com" in the text is by
insisting "author" to appear at the beginning of line by passing
"\nauthor " as "what".
The implementation also doesn't make any effort to limit itself to the
commit header by locating the blank line that appears after the header
part and stopping the search there. Also, the interface forces the
caller to make multiple calls if it wants to rewrite idents on multiple
headers. It shouldn't be the case.
To support the existing caller better, update commit_rewrite_person()
to:
- Make a single pass in the input buffer to locate headers named
"author" and "committer" and replace idents on them.
- Stop at the end of the header, ensuring that nothing in the body of
the commit object is modified.
The return type of the function commit_rewrite_person() has also been
changed from int to void. This has been done because the caller of the
function doesn't do anything with the return value of the function.
By simplifying the interface of the commit_rewrite_person(), we also
intend to expose it as a public function. We will also be renaming the
function in a future commit to a different name which clearly tells that
the function replaces idents in the header of the commit buffer.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: John Cai <johncai86@gmail.com>
Helped-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Siddharth Asthana <siddharthasthana31@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The resolve-undo extension was added to the index in cfc5789a
(resolve-undo: record resolved conflicts in a new index extension
section, 2009-12-25). This extension records the blob object names
and their modes of conflicted paths when the path gets resolved
(e.g. with "git add"), to allow "undoing" the resolution with
"checkout -m path". These blob objects should be guarded from
garbage-collection while we have the resolve-undo information in the
index (otherwise unresolve operation may try to use a blob object
that has already been pruned away).
But the code called from mark_reachable_objects() for the index
forgets to do so. Teach add_index_objects_to_pending() helper to
also add objects referred to by the resolve-undo extension.
Also make matching changes to "fsck", which has code that is fairly
similar to the reachability stuff, but have parallel implementations
for all these stuff, which may (or may not) someday want to be unified.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Plug the memory leaks from the trickiest API of all, the revision
walker.
* ab/plug-leak-in-revisions: (27 commits)
revisions API: add a TODO for diff_free(&revs->diffopt)
revisions API: have release_revisions() release "topo_walk_info"
revisions API: have release_revisions() release "date_mode"
revisions API: call diff_free(&revs->pruning) in revisions_release()
revisions API: release "reflog_info" in release revisions()
revisions API: clear "boundary_commits" in release_revisions()
revisions API: have release_revisions() release "prune_data"
revisions API: have release_revisions() release "grep_filter"
revisions API: have release_revisions() release "filter"
revisions API: have release_revisions() release "cmdline"
revisions API: have release_revisions() release "mailmap"
revisions API: have release_revisions() release "commits"
revisions API users: use release_revisions() for "prune_data" users
revisions API users: use release_revisions() with UNLEAK()
revisions API users: use release_revisions() in builtin/log.c
revisions API users: use release_revisions() in http-push.c
revisions API users: add "goto cleanup" for release_revisions()
stash: always have the owner of "stash_info" free it
revisions API users: use release_revisions() needing REV_INFO_INIT
revision.[ch]: document and move code declared around "init"
...
|
|
Introduce and apply coccinelle rule to discourage an explicit
comparison between a pointer and NULL, and applies the clean-up to
the maintenance track.
* ep/maint-equals-null-cocci:
tree-wide: apply equals-null.cocci
tree-wide: apply equals-null.cocci
contrib/coccinnelle: add equals-null.cocci
|
|
* ep/maint-equals-null-cocci:
tree-wide: apply equals-null.cocci
contrib/coccinnelle: add equals-null.cocci
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "--since=<time>" option of "git log" limits the commits displayed by
the command by stopping the traversal once it sees a commit whose
timestamp is older than the given time and not digging further into its
parents.
This is OK in a history where a commit always has a newer timestamp than
any of its parents'. Once you see a commit older than the given <time>,
all ancestor commits of it are even older than the time anyway. It
poses, however, a problem when there is a commit with a wrong timestamp
that makes it appear older than its parents. Stopping traversal at the
"incorrectly old" commit will hide its ancestors that are newer than
that wrong commit and are newer than the cut-off time given with the
--since option. --max-age and --after being the synonyms to --since,
they share the same issue.
Add a new "--since-as-filter" option that is a variant of
"--since=<time>". Instead of stopping the traversal to hide an old
enough commit and its all ancestors, exclude commits with an old
timestamp from the output but still keep digging the history.
Without other traversal stopping options, this will force the command in
"git log" family to dig down the history to the root. It may be an
acceptable cost for a small project with short history and many commits
with screwy timestamps.
It is quite unlikely for us to add traversal stopper other than since,
so have this as a --since-as-filter option, rather than a separate
--as-filter, that would be probably more confusing.
Signed-off-by: Miklos Vajna <vmiklos@vmiklos.hu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a TODO comment indicating that we should release "diffopt" in
release_revisions(). In a preceding commit we started releasing the
"pruning" member of the same type, but handling "diffopt" will require
us to untangle the "no_free" conditions I added in e900d494dcf (diff:
add an API for deferred freeing, 2021-02-11).
Let's leave a TODO comment to that effect, and so that we don't forget
refactor code that was changed to use release_revisions() in earlier
commits to stop using the "diffopt" member after a call to
release_revisions(). This works currently, but would become a logic
error as soon as we started freeing "diffopt". Doing that change now
doesn't harm anything, and future-proofs us against a later change to
release_revisions().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor the existing reset_topo_walk() into a thin wrapper for a
release_revisions_topo_walk_info() + resetting the member to "NULL",
and call release_revisions_topo_walk_info() from release_revisions().
This fixes memory leaks that have been with us ever since
"topo_walk_info" was added to revision.[ch] in
f0d9cc4196a (revision.c: begin refactoring --topo-order logic,
2018-11-01).
Due to various other leaks this makes no tests pass in their entirety,
but e.g. before this running this on git.git:
./git -P log --pretty=tformat:"%P %H | %s" --parents --full-history --topo-order -3 -- README.md
Would report under SANITIZE=leak:
SUMMARY: LeakSanitizer: 531064 byte(s) leaked in 6 allocation(s).
Now we'll free all of that memory.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Extend the the release_revisions() function so that it frees the
"date_mode" in the "struct ref_info".
This uses the date_mode_release() function added in 974c919d36d (date
API: add and use a date_mode_release(), 2022-02-16). As that commit
notes "t7004-tag.sh" tests for the leaks that are being fixed
here. That test now fails "only" 44 tests, instead of the 46 it failed
before this change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Call diff_free() on the "pruning" member of "struct rev_info". Doing
so makes several tests pass under SANITIZE=leak.
This was also the last missing piece that allows us to remove the
UNLEAK() in "cmd_diff" and "cmd_diff_index", which allows us to use
those commands as a canary for general leaks in the revisions API. See
[1] for further rationale, and 886e1084d78 (builtin/: add UNLEAKs,
2017-10-01) for the commit that added the UNLEAK() there.
1. https://lore.kernel.org/git/220218.861r00ib86.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
