Age | Commit message (Collapse) | Author |
|
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The trace API currently rechecks the environment variable and reopens the
trace file on every API call. This has the ugly side effect that errors
(e.g. file cannot be opened, or the user specified a relative path) are
also reported on every call. Performance can be improved by about factor
three by remembering the environment state and keeping the file open.
Replace the 'const char *key' parameter in the API with a pointer to a
'struct trace_key' that bundles the environment variable name with
additional, trace-internal state. Change the call sites of these APIs to
use a static 'struct trace_key' instead of a string constant.
In trace.c::get_trace_fd(), save and reuse the file descriptor in 'struct
trace_key'.
Add a 'trace_disable()' API, so that packet_trace() can cleanly disable
tracing when it encounters packed data (instead of using unsetenv()).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before writing the shallow file, we stat() the existing file
to make sure it has not been updated since our operation
began. However, we do not do so under a lock, so there is a
possible race:
1. Process A takes the lock.
2. Process B calls check_shallow_file_for_update and finds
no update.
3. Process A commits the lockfile.
4. Process B takes the lock, then overwrite's process A's
changes.
We can fix this by doing our check while we hold the lock.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We sometimes write tempfiles of the form "shallow_XXXXXX"
during fetch/push operations with shallow repositories.
Under normal circumstances, we clean up the result when we
are done. However, we do no take steps to clean up after
ourselves when we exit due to die() or signal death.
This patch teaches the tempfile creation code to register
handlers to clean up after ourselves. To handle this, we
change the ownership semantics of the filename returned by
setup_temporary_shallow. It now keeps a copy of the filename
itself, and returns only a const pointer to it.
We can also do away with explicit tempfile removal in the
callers. They all exit not long after finishing with the
file, so they can rely on the auto-cleanup, simplifying the
code.
Note that we keep things simple and maintain only a single
filename to be cleaned. This is sufficient for the current
caller, but we future-proof it with a die("BUG").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we are about to write the shallow file, we check that
it has not changed since we last read it. Instead of
hand-rolling this, we can use stat_validity. This is built
around the index stat-check, so it is more robust than just
checking the mtime, as we do now (it uses the same check as
we do for index files).
The new code also handles the case of a shallow file
appearing unexpectedly. With the current code, two
simultaneous processes making us shallow (e.g., two "git
fetch --depth=1" running at the same time in a non-shallow
repository) can race to overwrite each other.
As a bonus, we also remove a race in determining the stat
information of what we read (we stat and then open, leaving
a race window; instead we should open and then fstat the
descriptor).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fetching from a shallow-cloned repository used to be forbidden,
primarily because the codepaths involved were not carefully vetted
and we did not bother supporting such usage. This attempts to allow
object transfer out of a shallow-cloned repository in a controlled
way (i.e. the receiver become a shallow repository with truncated
history).
* nd/shallow-clone: (31 commits)
t5537: fix incorrect expectation in test case 10
shallow: remove unused code
send-pack.c: mark a file-local function static
git-clone.txt: remove shallow clone limitations
prune: clean .git/shallow after pruning objects
clone: use git protocol for cloning shallow repo locally
send-pack: support pushing from a shallow clone via http
receive-pack: support pushing to a shallow clone via http
smart-http: support shallow fetch/clone
remote-curl: pass ref SHA-1 to fetch-pack as well
send-pack: support pushing to a shallow clone
receive-pack: allow pushes that update .git/shallow
connected.c: add new variant that runs with --shallow-file
add GIT_SHALLOW_FILE to propagate --shallow-file to subprocesses
receive/send-pack: support pushing from a shallow clone
receive-pack: reorder some code in unpack()
fetch: add --update-shallow to accept refs that update .git/shallow
upload-pack: make sure deepening preserves shallow roots
fetch: support fetching from a shallow repository
clone: support remote shallow repository
...
|
|
Commit 58babfff ("shallow.c: the 8 steps to select new commits for
.git/shallow", 05-12-2013) added a function to implement step 5 of
the quoted eight steps, namely 'remove_nonexistent_ours_in_pack()'.
This function implements an optional optimization step in the new
shallow commit selection algorithm. However, this function has no
callers. (The commented out call sites would need to change, in
order to provide information required by the function.)
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch teaches "prune" to remove shallow roots that are no longer
reachable from any refs (e.g. when the relevant refs are removed).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The basic 8 steps to update .git/shallow does not fully apply here
because the user may choose to accept just a few refs (while fetch
always accepts all refs). The steps are modified a bit.
1-6. same as before. After calling assign_shallow_commits_to_refs at
step 6, each shallow commit has a bitmap that marks all refs that
require it.
7. mark all "ours" shallow commits that are reachable from any
refs. We will need to do the original step 7 on them later.
8. go over all shallow commit bitmaps, mark refs that require new
shallow commits.
9. setup a strict temporary shallow file to plug all the holes, even
if it may cut some of our history short. This file is used by all
hooks. The hooks could use --shallow-file=$GIT_DIR/shallow to
overcome this and reach everything in current repo.
10. go over the new refs one by one. For each ref, do the reachability
test if it needs a shallow commit on the list from step 7. Remove
it if it's reachable from our refs. Gather all required shallow
commits, run check_everything_connected() with the new ref, then
install them to .git/shallow.
This mode is disabled by default and can be turned on with
receive.shallowupdate
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This may be needed when a hook is run after a new shallow pack is
received, but .git/shallow is not settled yet. A temporary shallow
file to plug all loose ends should be used instead. GIT_SHALLOW_FILE
is overriden by --shallow-file.
--shallow-file does not work in this case because the hook may spawn
many git subprocesses and the launch commands do not have
--shallow-file as it's a recent addition.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "fetch --depth=N" where N exceeds the longest chain of history in
the source repo, usually we just send an "unshallow" line to the
client so full history is obtained.
When the source repo is shallow we need to make sure to "unshallow"
the current shallow point _and_ "shallow" again when the commit
reaches its shallow bottom in the source repo.
This should fix both cases: large <N> and --unshallow.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Suppose a fetch or push is requested between two shallow repositories
(with no history deepening or shortening). A pack that contains
necessary objects is transferred over together with .git/shallow of
the sender. The receiver has to determine whether it needs to update
.git/shallow if new refs needs new shallow comits.
The rule here is avoid updating .git/shallow by default. But we don't
want to waste the received pack. If the pack contains two refs, one
needs new shallow commits installed in .git/shallow and one does not,
we keep the latter and reject/warn about the former.
Even if .git/shallow update is allowed, we only add shallow commits
strictly necessary for the former ref (remember the sender can send
more shallow commits than necessary) and pay attention not to
accidentally cut the receiver history short (no history shortening is
asked for)
So the steps to figure out what ref need what new shallow commits are:
1. Split the sender shallow commit list into "ours" and "theirs" list
by has_sha1_file. Those that exist in current repo in "ours", the
remaining in "theirs".
2. Check the receiver .git/shallow, remove from "ours" the ones that
also exist in .git/shallow.
3. Fetch the new pack. Either install or unpack it.
4. Do has_sha1_file on "theirs" list again. Drop the ones that fail
has_sha1_file. Obviously the new pack does not need them.
5. If the pack is kept, remove from "ours" the ones that do not exist
in the new pack.
6. Walk the new refs to answer the question "what shallow commits,
both ours and theirs, are required in .git/shallow in order to add
this ref?". Shallow commits not associated to any refs are removed
from their respective list.
7. (*) Check reachability (from the current refs) of all remaining
commits in "ours". Those reachable are removed. We do not want to
cut any part of our (reachable) history. We only check up
commits. True reachability test is done by
check_everything_connected() at the end as usual.
8. Combine the final "ours" and "theirs" and add them all to
.git/shallow. Install new refs. The case where some hook rejects
some refs on a push is explained in more detail in the push
patches.
Of these steps, #6 and #7 are expensive. Both require walking through
some commits, or in the worst case all commits. And we rather avoid
them in at least common case, where the transferred pack does not
contain any shallow commits that the sender advertises. Let's look at
each scenario:
1) the sender has longer history than the receiver
All shallow commits from the sender will be put into "theirs" list
at step 1 because none of them exists in current repo. In the
common case, "theirs" becomes empty at step 4 and exit early.
2) the sender has shorter history than the receiver
All shallow commits from the sender are likely in "ours" list at
step 1. In the common case, if the new pack is kept, we could empty
"ours" and exit early at step 5.
If the pack is not kept, we hit the expensive step 6 then exit
after "ours" is emptied. There'll be only a handful of objects to
walk in fast-forward case. If it's forced update, we may need to
walk to the bottom.
3) the sender has same .git/shallow as the receiver
This is similar to case 2 except that "ours" should be emptied at
step 2 and exit early.
A fetch after "clone --depth=X" is case 1. A fetch after "clone" (from
a shallow repo) is case 3. Luckily they're cheap for the common case.
A push from "clone --depth=X" falls into case 2, which is expensive.
Some more work may be done at the sender/client side to avoid more
work on the server side: if the transferred pack does not contain any
shallow commits, send-pack should not send any shallow commits to the
receive-pack, effectively turning it into a normal push and avoid all
steps.
This patch implements all steps except #3, already handled by
fetch-pack and receive-pack, #6 and #7, which has their own patch due
to their size.
(*) in previous versions step 7 was put before step 3. I reorder it so
that the common case that keeps the pack does not need to walk
commits at all. In future if we implement faster commit
reachability check (maybe with the help of pack bitmaps or commit
cache), step 7 could become cheap and be moved up before 6 again.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If either receive-pack or upload-pack is called on a shallow
repository, shallow commits (*) will be sent after the ref
advertisement (but before the packet flush), so that the receiver has
the full "shape" of the sender's commit graph. This will be needed for
the receiver to update its .git/shallow if necessary.
This breaks the protocol for all clients trying to push to a shallow
repo, or fetch from one. Which is basically the same end result as
today's "is_repository_shallow() && die()" in receive-pack and
upload-pack. New clients will be made aware of shallow upstream and
can make use of this information.
The sender must send all shallow commits that are sent in the
following pack. It may send more shallow commits than necessary.
upload-pack for example may choose to advertise no shallow commits if
it knows in advance that the pack it's going to send contains no
shallow commits. But upload-pack is the server, so we choose the
cheaper way, send full .git/shallow and let the client deal with it.
Smart HTTP is not affected by this patch. Shallow support on
smart-http comes later separately.
(*) A shallow commit is a commit that terminates the revision
walker. It is usually put in .git/shallow in order to keep the
revision walker from going out of bound because there is no
guarantee that objects behind this commit is available.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/robustify-parse-commit:
checkout: do not die when leaving broken detached HEAD
use parse_commit_or_die instead of custom message
use parse_commit_or_die instead of segfaulting
assume parse_commit checks for NULL commit
assume parse_commit checks commit->object.parsed
log_tree_diff: die when we fail to parse a commit
|
|
Many calls to parse_commit detect errors and die. In some
cases, the custom error messages are more useful than what
parse_commit_or_die could produce, because they give some
context, like which ref the commit came from. Some, however,
just say "invalid commit". Let's convert the latter to use
parse_commit_or_die; its message is slightly more informative,
and it makes the error more consistent throughout git.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function is like setup_alternate_shallow() except that it does
not lock $GIT_DIR/shallow. It is supposed to be used when a program
generates temporary shallow for use by another program, then throw
the shallow file away.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
for_each_commit_graft() goes through all graft points, and shallow
boundaries are just one special kind of grafting.
If $GIT_DIR/shallow and $GIT_DIR/info/grafts are both present,
write_shallow_commits() may catch both sets, accidentally turning
some graft points to shallow boundaries. Don't do that.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mk/upload-pack-off-by-one-dead-code-removal:
upload-pack: remove a piece of dead code
|
|
Commit 682c7d2 (upload-pack: fix off-by-one depth calculation in shallow
clone) introduced a new check in get_shallow_commits to decide when to
stop traversing the history and mark the current commit as a shallow
root.
With this new check in place, the old check can no longer be true, since
the first check always fires first. This commit removes that check,
making the code a bit more simple again.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
index-pack --strict looks up and follows parent commits. If shallow
information is not ready by the time index-pack is run, index-pack may
be led to non-existent objects. Make fetch-pack save shallow file to
disk before invoking index-pack.
git learns new global option --shallow-file to pass on the alternate
shallow file path. Undocumented (and not even support --shallow-file=
syntax) because it's unlikely to be used again elsewhere.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
get_shallow_commits() is used to determine the cut points at a given
depth (i.e. the number of commits in a chain that the user likes to
get). However we count current depth up to the commit "commit" but we
do the cutting at its parents (i.e. current depth + 1). This makes
upload-pack always return one commit more than requested. This patch
fixes it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mk/maint-parse-careful:
peel_onion: handle NULL
check return value from parse_commit() in various functions
parse_commit: don't fail, if object is NULL
revision.c: handle tag->tagged == NULL
reachable.c::process_tree/blob: check for NULL
process_tag: handle tag->tagged == NULL
check results of parse_commit in merge_bases
list-objects.c::process_tree/blob: check for NULL
reachable.c::add_one_tree: handle NULL from lookup_tree
mark_blob/tree_uninteresting: check for NULL
get_sha1_oneline: check return value of parse_object
read_object_with_reference: don't read beyond the buffer
|
|
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Tags should be considered when truncating the
commit list. The patch below fixes it, and fetches the right number of
commits for each tag. However the correct fix is probably to not fetch
historical tags at all.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Now, by saying "git fetch -depth <n> <repo>" you can deepen
a shallow repository.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
A shallow commit is a commit which has parents, which in turn are
"grafted away", i.e. the commit appears as if it were a root.
Since these shallow commits should not be edited by the user, but
only by core git, they are recorded in the file $GIT_DIR/shallow.
A repository containing shallow commits is called shallow.
The advantage of a shallow repository is that even if the upstream
contains lots of history, your local (shallow) repository needs not
occupy much disk space.
The disadvantage is that you might miss a merge base when pulling
some remote branch.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|