Age | Commit message (Collapse) | Author |
|
The streaming read interface from a loose object called
parse_sha1_header() but discarded its return value, without noticing
a potential error.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sb/plug-streaming-leak:
streaming.c: fix a memleak
|
|
When stream_blob_to_fd() opens an input stream with a filter, the
filter gets discarded upon calling close_istream() before the
function returns in the normal case. However, when we fail to open
the stream, we failed to discard the filter.
By discarding the filter in the failure case, give a consistent
life-time rule of the filter to the callers; otherwise the callers
need to conditionally discard the filter themselves, and this
function does not give enough hint for the caller to do so
correctly.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When stream-filter cannot be attached, it is expected to return NULL,
and we should close the stream we opened and signal an error by
returning NULL ourselves from this function.
However, we attempted to dereference that NULL pointer between the
point we detected the error and returned from the function.
Brought-to-attention-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ef/mingw-write:
mingw: remove mingw_write
prefer xwrite instead of write
|
|
Our xwrite wrapper already deals with a few potential hazards, and
are as such more robust. Prefer it instead of write to get the
robustness benefits everywhere.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Reviewed-and-improved-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This parameter is not used yet, but it will be used to tell
sha1_object_info_extended() if it should perform object
replacement or not.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If somebody wants to only know on-disk footprint of an object
without having to know its type or payload size, we can bypass a
lot of code to cheaply learn it.
* jk/cat-file-batch-optim:
Fix some sparse warnings
sha1_object_info_extended: pass object_info to helpers
sha1_object_info_extended: make type calculation optional
packed_object_info: make type lookup optional
packed_object_info: hoist delta type resolution to helper
sha1_loose_object_info: make type lookup optional
sha1_object_info_extended: rename "status" to "type"
cat-file: disable object/refname ambiguity check for batch mode
|
|
'st' is allocated via xmalloc a few lines before and passed to
the stream opening functions.
The xmalloc function is written in a way that either 'st' is allocated
valid memory or xmalloc already dies.
The function calls to open_istream_* do not change 'st', as the pointer is
passed by reference and not a pointer of a pointer.
Hence 'st' cannot be null at that part of the code.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Sparse issues some "Using plain integer as NULL pointer" warnings.
Each warning relates to the use of an '{0}' initialiser expression
in the declaration of an 'struct object_info'. The first field of
this structure has pointer type. Thus, in order to suppress these
warnings, we replace the initialiser expression with '{NULL}'.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Each caller of sha1_object_info_extended sets up an
object_info struct to tell the function which elements of
the object it wants to get. Until now, getting the type of
the object has always been required (and it is returned via
the return type rather than a pointer in object_info).
This can involve actually opening a loose object file to
determine its type, or following delta chains to determine a
packed file's base type. These effects produce a measurable
slow-down when doing a "cat-file --batch-check" that does
not include %(objecttype).
This patch adds a "typep" query to struct object_info, so
that it can be optionally queried just like size and
disk_size. As a result, the return type of the function is
no longer the object type, but rather 0/-1 for success/error.
As there are only three callers total, we just fix up each
caller rather than keep a compatibility wrapper:
1. The simpler sha1_object_info wrapper continues to
always ask for and return the type field.
2. The istream_source function wants to know the type, and
so always asks for it.
3. The cat-file batch code asks for the type only when
%(objecttype) is part of the format string.
On linux.git, the best-of-five for running:
$ git rev-list --objects --all >objects
$ time git cat-file --batch-check='%(objectsize:disk)'
on a fully packed repository goes from:
real 0m8.680s
user 0m8.160s
sys 0m0.512s
to:
real 0m7.205s
user 0m6.580s
sys 0m0.608s
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sha1_object_info_extended function expects the caller to
provide a "struct object_info" which contains pointers to
"query" items that will be filled in. The purpose of
providing pointers rather than storing the response directly
in the struct is so that callers can choose not to incur the
expense in finding particular fields that they do not care
about.
Right now the only query item is "sizep", and all callers
set it explicitly to choose whether or not to query it; they
can then leave the rest of the struct uninitialized.
However, as we add new query items, each caller will have to
be updated to explicitly turn off the new ones (by setting
them to NULL). Instead, let's teach each caller to
zero-initialize the struct, so that they do not have to
learn about each new query item added.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The read_istream_loose function loops on inflating a chunk of data
from an mmap'd loose object. We end the loop when we run out
of space in our output buffer, or if we see a zlib error.
We need to treat Z_BUF_ERROR specially, though, as it is not
fatal; it is just zlib's way of telling us that we need to
either feed it more input or give it more output space. It
is perfectly normal for us to hit this when we are at the
end of our buffer.
However, we may also get Z_BUF_ERROR because we have run out
of input. In a well-formed object, this should not happen,
because we have fed the whole mmap'd contents to zlib. But
if the object is truncated or corrupt, we will loop forever,
never giving zlib any more data, but continuing to ask it to
inflate.
We can fix this by considering it an error when zlib returns
Z_BUF_ERROR but we still have output space left (which means
it must want more input, which we know is a truncation
error). It would not be sufficient to just check whether
zlib had consumed all the input at the start of the loop, as
it might still want to generate output from what is in its
internal state.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The filter istream pulls data from an "upstream" stream,
running it through a filter function. However, we did not
properly notice when the upstream filter yielded an error,
and just returned what we had read. Instead, we should
propagate the error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We call read_istream, but never check its return value for
errors. This can lead to us looping infinitely, as we just
keep trying to write "-1" bytes (and we do not notice the
error, as we simply check that write_in_full reports the
same number of bytes we fed it, which of course is also -1).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is because all other places do "xx > big_file_threshold"
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow any kind of buffer to be fed to read_istream() without an explicit
cast by making it's buf argument a void pointer. It's about arbitrary
data, not only characters.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The static function in entry.c takes a cache entry and streams its blob
contents to a file in the working tree. Refactor the logic to a new API
function stream_blob_to_fd() that takes an object name and an open file
descriptor, so that it can be reused by other callers.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/streaming-filter:
streaming: free git_istream upon closing
|
|
Kirill Smelkov noticed that post-1.7.6 "git checkout"
started leaking tons of memory. The streaming_write_entry
function properly calls close_istream(), but that function
did not actually free() the allocated git_istream struct.
The git_istream struct is totally opaque to calling code,
and must be heap-allocated by open_istream. Therefore it's
not appropriate for callers to have to free it.
This patch makes close_istream() into "close and de-allocate
all associated resources". We could add a new "free_istream"
call, but there's not much point in letting callers inspect
the istream after close. And this patch's semantics make us
match fopen/fclose, which is well-known and understood.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/zlib-wrap:
zlib: allow feeding more than 4GB in one go
zlib: zlib can only process 4GB at a time
zlib: wrap deflateBound() too
zlib: wrap deflate side of the API
zlib: wrap inflateInit2 used to accept only for gzip format
zlib: wrap remaining calls to direct inflate/inflateEnd
zlib wrapper: refactor error message formatter
Conflicts:
sha1_file.c
|
|
Some filters may need to buffer the input and look-ahead inside it
to decide what to output, and they may consume more than zero bytes
of input and still not produce any output. After feeding all the
input, pass NULL as input as keep calling stream_filter() to let
such filters know there is no more input coming, and it is time for
them to produce the remaining output based on the buffered input.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This introduces an API to plug custom filters to an input stream.
The caller gets get_stream_filter("path") to obtain an appropriate
filter for the path, and then uses it when opening an input stream
via open_istream(). After that, the caller can read from the stream
with read_istream(), and close it with close_istream(), just like an
unfiltered stream.
This only adds a "null" filter that is a pass-thru filter, but later
changes can add LF-to-CRLF and other filters, and the callers of the
streaming API do not have to change.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Given an object name, use open_istream() to get a git_istream handle
that you can read_istream() from as if you are using read(2) to read
the contents of the object, and close it with close_istream() when
you are done.
Currently, we do not do anything fancy--it just calls read_sha1_file()
and keeps the contents in memory as a whole, and carve it out as you
request with read_istream().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|