| Age | Commit message (Collapse) | Author |
|---|
|
Streaming "open" functions need to conform to the same virtual function
interface, but not every implementation needs every parameter. Mark the
unused ones as such to appease -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make parse_loose_header() return error codes and data instead of
invoking die() by itself.
For now we'll move the relevant die() call to loose_object_info() and
read_loose_object() to keep this change smaller. In a subsequent
commit we'll make read_loose_object() return an error code instead of
dying. We should also address the "allow_unknown" case (should be
moved to builtin/cat-file.c), but for now I'll be leaving it.
For making parse_loose_header() not die() change its prototype to
accept a "struct object_info *" instead of the "unsigned long *sizep"
it accepted before. Its callers can now check the populated populated
"oi->typep".
Because of this we don't need to pass in the "unsigned int flags"
which we used for OBJECT_INFO_ALLOW_UNKNOWN_TYPE, we can instead do
that check in loose_object_info().
This also refactors some confusing control flow around the "status"
variable. In some cases we set it to the return value of "error()",
i.e. -1, and later checked if "status < 0" was true.
Since 93cff9a978e (sha1_loose_object_info: return error for corrupted
objects, 2017-04-01) the return value of loose_object_info() (then
named sha1_loose_object_info()) had been a "status" variable that be
any negative value, as we were expecting to return the "enum
object_type".
The only negative type happens to be OBJ_BAD, but the code still
assumed that more might be added. This was then used later in
e.g. c84a1f3ed4d (sha1_file: refactor read_object, 2017-06-21). Now
that parse_loose_header() will return 0 on success instead of the
type (which it'll stick into the "struct object_info") we don't need
to conflate these two cases in its callers.
Since parse_loose_header() doesn't need to return an arbitrary
"status" we only need to treat its "ret < 0" specially, but can
idiomatically overwrite it with our own error() return. This along
with having made unpack_loose_header() return an "enum
unpack_loose_header_result" in an earlier commit means that we can
move the previously nested if/else cases mostly into the "ULHR_OK"
branch of the "switch" statement.
We should be less silent if we reach that "status = -1" branch, which
happens if we've got trailing garbage in loose objects, see
f6371f92104 (sha1_file: add read_loose_object() function, 2017-01-13)
for a better way to handle it. For now let's punt on it, a subsequent
commit will address that edge case.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Split up the return code for "header too long" from the generic
negative return value unpack_loose_header() returns, and report via
error() if we exceed MAX_HEADER_LEN.
As a test added earlier in this series in t1006-cat-file.sh shows
we'll correctly emit zlib errors from zlib.c already in this case, so
we have no need to carry those return codes further down the
stack. Let's instead just return ULHR_TOO_LONG saying we ran into the
MAX_HEADER_LEN limit, or other negative values for "unable to unpack
<OID> header".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a preceding commit we changed and documented unpack_loose_header()
from its previous behavior of returning any negative value or zero, to
only -1 or 0.
Let's add an "enum unpack_loose_header_result" type and use it for
these return values, and have the compiler assert that we're
exhaustively covering all of them.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Combine the unpack_loose_short_header(),
unpack_loose_header_to_strbuf() and unpack_loose_header() functions
into one.
The unpack_loose_header_to_strbuf() function was added in
46f034483eb (sha1_file: support reading from a loose object of unknown
type, 2015-05-03).
Its code was mostly copy/pasted between it and both of
unpack_loose_header() and unpack_loose_short_header(). We now have a
single unpack_loose_header() function which accepts an optional
"struct strbuf *" instead.
I think the remaining unpack_loose_header() function could be further
simplified, we're carrying some complexity just to be able to emit a
garbage type longer than MAX_HEADER_LEN, we could alternatively just
say "we found a garbage type <first 32 bytes>..." instead. But let's
leave the current behavior in place for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make the parse_loose_header_extended() function public and remove the
parse_loose_header() wrapper. The only direct user of it outside of
object-file.c itself was in streaming.c, that caller can simply pass
the required "struct object-info *" instead.
This change is being done in preparation for teaching
read_loose_object() to accept a flag to pass to
parse_loose_header(). It isn't strictly necessary for that change, we
could simply use parse_loose_header_extended() there, but will leave
the API in a better end state.
It would be a better end-state to have already moved the declaration
of these functions to object-store.h to avoid the forward declaration
of "struct object_info" in cache.h, but let's leave that cleanup for
some other time.
1. https://lore.kernel.org/git/patch-v6-09.22-5b9278e7bb4-20210907T104559Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the definition of the structure around the open/close/read
functions introduced in 46bf043807c (streaming: a new API to read from
the object store, 2011-05-11) to instead populate "close" and "read"
members in the "struct git_istream".
This gets us rid of an extra pointer deference, and I think makes more
sense. The "close" and "read" functions are the primary interface to
the stream itself.
Let's also populate a "open" callback in the same struct. That's now
used by open_istream() after istream_source() decides what "open"
function should be used. This isn't needed to get rid of the
"stream_vtbl" variables, but makes sense for consistency.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the streaming interface to stop passing around the "struct
object_info" the open() functions.
As seen in 7ef2d9a2604 (streaming: read non-delta incrementally from a
pack, 2011-05-13) which introduced the "st->u.in_pack" assignments
being changed here only the open_istream_pack_non_delta() path need
these.
So let's instead do this when preparing the selected callback in the
istream_source() function. This might also allow the compiler to
reduce the lifetime of the "oi" variable, as we've moved it from
"git_istream()" to "istream_source()".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the {open,close,read}_method_decl() macros added in
46bf043807c (streaming: a new API to read from the object store,
2011-05-11) in favor of inlining the definition of the arguments of
these functions.
Since we'll end up using them via the "{open,close,read}_istream_fn"
types we don't gain anything in the way of compiler checking by using
these macros, and as of preceding commits we no longer need to declare
these argument lists twice. So declaring them at a distance just
serves to make the code less readable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the indirection of discovering a function pointer to use via an
enum and virtual table. This refactors code added in
46bf043807c (streaming: a new API to read from the object store,
2011-05-11).
We can instead simply return an "open_istream_fn" for use from the
"istream_source()" selector function directly. This allows us to get
rid of the "incore", "loose" and "pack_non_delta" enum
variables. We'll return the functions instead.
The "stream_error" variable in that enum can likewise go in favor of
returning NULL, which is what the open_istream() was doing when it got
that value anyway.
We can thus remove the entire enum, and the "open_istream_tbl" virtual
table that (indirectly) referenced it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change code added in 46bf043807c (streaming: a new API to read from
the object store, 2011-05-11) to avoid forward declarations of the
functions it uses. We can instead move this code to the bottom of the
file, and thus avoid the open_method_decl() calls.
Aside from the addition of the "static helpers[...]" comment being
added here, and the removal of the forward declarations this is a
move-only change.
The style of the added "static helpers[...]" comment isn't in line
with our usual coding style, but is consistent with several other
comments used in this file, so let's use that style consistently here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some callers of open_istream() at archive-tar.c and archive-zip.c are
capable of working on arbitrary repositories but the repo struct is not
passed down to open_istream(), which uses the_repository internally. For
now, that's not a problem since the said callers are only being called
with the_repository. But to be consistent and avoid future problems,
let's allow open_istream() to receive a struct repository and use that
instead of the_repository. This parameter addition will also be used in
a future patch to make sha1-file.c:check_object_signature() be able to
work on arbitrary repos.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* jk/loose-object-cache-oid:
prefer "hash mismatch" to "sha1 mismatch"
sha1-file: avoid "sha1 file" for generic use in messages
sha1-file: prefer "loose object file" to "sha1 file" in messages
sha1-file: drop has_sha1_file()
convert has_sha1_file() callers to has_object_file()
sha1-file: convert pass-through functions to object_id
sha1-file: modernize loose header/stream functions
sha1-file: modernize loose object file functions
http: use struct object_id instead of bare sha1
update comment references to sha1_object_info()
sha1-file: fix outdated sha1 comment references
|
|
The in-core repository instances are passed through more codepaths.
* sb/more-repo-in-api: (23 commits)
t/helper/test-repository: celebrate independence from the_repository
path.h: make REPO_GIT_PATH_FUNC repository agnostic
commit: prepare free_commit_buffer and release_commit_memory for any repo
commit-graph: convert remaining functions to handle any repo
submodule: don't add submodule as odb for push
submodule: use submodule repos for object lookup
pretty: prepare format_commit_message to handle arbitrary repositories
commit: prepare logmsg_reencode to handle arbitrary repositories
commit: prepare repo_unuse_commit_buffer to handle any repo
commit: prepare get_commit_buffer to handle any repo
commit-reach: prepare in_merge_bases[_many] to handle any repo
commit-reach: prepare get_merge_bases to handle any repo
commit-reach.c: allow get_merge_bases_many_0 to handle any repo
commit-reach.c: allow remove_redundant to handle any repo
commit-reach.c: allow merge_bases_many to handle any repo
commit-reach.c: allow paint_down_to_common to handle any repo
commit: allow parse_commit* to handle any repo
object: parse_object to honor its repository argument
object-store: prepare has_{sha1, object}_file to handle any repo
object-store: prepare read_object_file to deal with any repo
...
|
|
As with the open/map/close functions for loose objects that were
recently converted, the functions for parsing the loose object stream
use the name "sha1" and a bare "unsigned char *". Let's fix that so that
unpack_sha1_header() becomes unpack_loose_header(), etc.
These conversions are less clear-cut than the file access functions.
You could argue that the they are parsing Git's canonical object format
(i.e., "type size\0contents", over which we compute the hash), which is
not strictly tied to loose storage. But in practice these functions are
used only for loose objects, and using the term "loose_header" (instead
of "object_header") distinguishes it from the object header found in
packfiles (which contains the same information in a different format).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The loose object access code in sha1-file.c is some of the oldest in
Git, and could use some modernizing. It mostly uses "unsigned char *"
for object ids, which these days should be "struct object_id".
It also uses the term "sha1_file" in many functions, which is confusing.
The term "loose_objects" is much better. It clearly distinguishes
them from packed objects (which didn't even exist back when the name
"sha1_file" came into being). And it also distinguishes it from the
checksummed-file concept in csum-file.c (which until recently was
actually called "struct sha1file"!).
This patch converts the functions {open,close,map,stat}_sha1_file() into
open_loose_object(), etc, and switches their sha1 arguments for
object_id structs. Similarly, path functions like fill_sha1_path()
become fill_loose_path() and use object_ids.
The function sha1_loose_object_info() already says "loose", so we can
just drop the "sha1" (and teach it to use object_id).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
read_object_file_extended is not widely used, so migrate it all at once.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Twice now we have scratched our heads about why the loose streaming code
needs the protection added by 692f0bc7ae (avoid infinite loop in
read_istream_loose, 2013-03-25), but the similar code in its pack
counterpart does not.
The short answer is that use_pack() will die before it lets us run out
of bytes. Note that this could mean reading garbage (including the
trailing hash) from the packfile in some cases of corruption, but that's
OK. zlib will notice and complain (and if not, certainly the end result
will not match the object hash we expect).
Let's leave a comment this time to document our findings.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a repository argument to allow oid_object_info_extended callers
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a repository argument to allow callers of lookup_replace_object
to be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
lookup_replace_object is a low-level function that most users of the
object store do not need to use directly.
Move it to replace-object.h to avoid a dependency loop in an upcoming
change to its inline definition that will make use of repository.h.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactoring the internal global data structure to make it possible
to open multiple repositories, work with and then close them.
Rerolled by Duy on top of a separate preliminary clean-up topic.
The resulting structure of the topics looked very sensible.
* sb/object-store: (27 commits)
sha1_file: allow sha1_loose_object_info to handle arbitrary repositories
sha1_file: allow map_sha1_file to handle arbitrary repositories
sha1_file: allow map_sha1_file_1 to handle arbitrary repositories
sha1_file: allow open_sha1_file to handle arbitrary repositories
sha1_file: allow stat_sha1_file to handle arbitrary repositories
sha1_file: allow sha1_file_name to handle arbitrary repositories
sha1_file: add repository argument to sha1_loose_object_info
sha1_file: add repository argument to map_sha1_file
sha1_file: add repository argument to map_sha1_file_1
sha1_file: add repository argument to open_sha1_file
sha1_file: add repository argument to stat_sha1_file
sha1_file: add repository argument to sha1_file_name
sha1_file: allow prepare_alt_odb to handle arbitrary repositories
sha1_file: allow link_alt_odb_entries to handle arbitrary repositories
sha1_file: add repository argument to prepare_alt_odb
sha1_file: add repository argument to link_alt_odb_entries
sha1_file: add repository argument to read_info_alternates
sha1_file: add repository argument to link_alt_odb_entry
sha1_file: add raw_object_store argument to alt_odb_usable
pack: move approximate object count to object store
...
|
|
Add a repository argument to allow map_sha1_file callers to be more
specific about which repository to handle. This is a small mechanical
change; it doesn't change the implementation to handle repositories
other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
While at it, move the declaration to object-store.h, where it should
be easier to find.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert both the argument and the return value to be pointers to struct
object_id. Update the callers and their internals to deal with the new
type. Remove several temporaries which are no longer needed.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert read_sha1_file to take a pointer to struct object_id and rename
it read_object_file. Do the same for read_sha1_file_extended.
Convert one use in grep.c to use the new function without any other code
change, since the pointer being passed is a void pointer that is already
initialized with a pointer to struct object_id. Update the declaration
and definitions of the modified functions, and apply the following
semantic patch to convert the remaining callers:
@@
expression E1, E2, E3;
@@
- read_sha1_file(E1.hash, E2, E3)
+ read_object_file(&E1, E2, E3)
@@
expression E1, E2, E3;
@@
- read_sha1_file(E1->hash, E2, E3)
+ read_object_file(E1, E2, E3)
@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1.hash, E2, E3, E4)
+ read_object_file_extended(&E1, E2, E3, E4)
@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1->hash, E2, E3, E4)
+ read_object_file_extended(E1, E2, E3, E4)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the various open_istream variants to take a pointer to struct
object_id. Introduce a temporary, which will be removed later, to work
around the fact that lookup_replace_object still returns a pointer to
unsigned char.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert sha1_object_info and sha1_object_info_extended to take pointers
to struct object_id and rename them to use "oid" instead of "sha1" in
their names. Update the declaration and definition and apply the
following semantic patch, plus the standard object_id transforms:
@@
expression E1, E2;
@@
- sha1_object_info(E1.hash, E2)
+ oid_object_info(&E1, E2)
@@
expression E1, E2;
@@
- sha1_object_info(E1->hash, E2)
+ oid_object_info(E1, E2)
@@
expression E1, E2, E3;
@@
- sha1_object_info_extended(E1.hash, E2, E3)
+ oid_object_info_extended(&E1, E2, E3)
@@
expression E1, E2, E3;
@@
- sha1_object_info_extended(E1->hash, E2, E3)
+ oid_object_info_extended(E1, E2, E3)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the remaining caller of sha1_object_info_extended to use struct
object_id. Introduce temporaries, which will be removed later, since
there is a dependency loop between sha1_object_info_extended and
lookup_replace_object_extended. This allows us to convert the code in a
piecemeal fashion instead of all at once.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many codepaths did not diagnose write failures correctly when disks
go full, due to their misuse of write_in_full() helper function,
which have been corrected.
* jk/write-in-full-fix:
read_pack_header: handle signed/unsigned comparison in read result
config: flip return value of store_write_*()
notes-merge: use ssize_t for write_in_full() return value
pkt-line: check write_in_full() errors against "< 0"
convert less-trivial versions of "write_in_full() != len"
avoid "write_in_full(fd, buf, len) != len" pattern
get-tar-commit-id: check write_in_full() return against 0
config: avoid "write_in_full(fd, buf, len) < len" pattern
|
|
The prior commit converted many sites to check the return
value of write_in_full() for negativity, rather than a
mismatch with the input length. This patch covers similar
cases, but where the return value is stored in an
intermediate variable. These should get the same treatment,
but they need to be reviewed more carefully since it would
be a bug if the return value is stored in an unsigned type
(which indeed, it is in one of the cases).
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function open_packed_git() needs to be temporarily made global. Its
scope will be restored to static in a subsequent commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git pack-objects" in a repository with many packfiles used to
spend a lot of time looking for/at objects in them; the accesses to
the packfiles are now optimized by checking the most-recently-used
packfile first.
* jk/pack-objects-optim-mru:
pack-objects: use mru list when iterating over packs
pack-objects: break delta cycles before delta-search phase
sha1_file: make packed_object_info public
provide an initializer for "struct object_info"
|
|
Codepaths that read from an on-disk loose object were too loose in
validating what they are reading is a proper object file and
sometimes read past the data they read from the disk, which has
been corrected. H/t to Gustavo Grieco for reporting.
* jc/verify-loose-object-header:
unpack_sha1_header(): detect malformed object header
streaming: make sure to notice corrupt object
|
|
The streaming read interface from a loose object called
parse_sha1_header() but discarded its return value, without noticing
a potential error.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since all of its callers have been updated, modify stream_blob_to_fd to
take a struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An all-zero initializer is fine for this struct, but because
the first element is a pointer, call sites need to know to
use "NULL" instead of "0". Otherwise some static checkers
like "sparse" will complain; see d099b71 (Fix some sparse
warnings, 2013-07-18) for example. So let's provide an
initializer to make this easier to get right.
But let's also comment that memset() to zero is explicitly
OK[1]. One of the callers embeds object_info in another
struct which is initialized via memset (expand_data in
builtin/cat-file.c). Since our subset of C doesn't allow
assignment from a compound literal, handling this in any
other way is awkward, so we'd like to keep the ability to
initialize by memset(). By documenting this property, it
should make anybody who wants to change the initializer
think twice before doing so.
There's one other caller of interest. In parse_sha1_header(),
we did not initialize the struct fully in the first place.
This turned out not to be a bug because the sub-function it
calls does not look at any other fields except the ones we
did initialize. But that assumption might not hold in the
future, so it's a dangerous construct. This patch switches
it to initializing the whole struct, which protects us
against unexpected reads of the other fields.
[1] Obviously using memset() to initialize a pointer
violates the C standard, but we long ago decided that it
was an acceptable tradeoff in the real world.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sb/plug-streaming-leak:
streaming.c: fix a memleak
|
|
When stream_blob_to_fd() opens an input stream with a filter, the
filter gets discarded upon calling close_istream() before the
function returns in the normal case. However, when we fail to open
the stream, we failed to discard the filter.
By discarding the filter in the failure case, give a consistent
life-time rule of the filter to the callers; otherwise the callers
need to conditionally discard the filter themselves, and this
function does not give enough hint for the caller to do so
correctly.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When stream-filter cannot be attached, it is expected to return NULL,
and we should close the stream we opened and signal an error by
returning NULL ourselves from this function.
However, we attempted to dereference that NULL pointer between the
point we detected the error and returned from the function.
Brought-to-attention-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ef/mingw-write:
mingw: remove mingw_write
prefer xwrite instead of write
|
|
Our xwrite wrapper already deals with a few potential hazards, and
are as such more robust. Prefer it instead of write to get the
robustness benefits everywhere.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Reviewed-and-improved-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This parameter is not used yet, but it will be used to tell
sha1_object_info_extended() if it should perform object
replacement or not.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If somebody wants to only know on-disk footprint of an object
without having to know its type or payload size, we can bypass a
lot of code to cheaply learn it.
* jk/cat-file-batch-optim:
Fix some sparse warnings
sha1_object_info_extended: pass object_info to helpers
sha1_object_info_extended: make type calculation optional
packed_object_info: make type lookup optional
packed_object_info: hoist delta type resolution to helper
sha1_loose_object_info: make type lookup optional
sha1_object_info_extended: rename "status" to "type"
cat-file: disable object/refname ambiguity check for batch mode
|
|
'st' is allocated via xmalloc a few lines before and passed to
the stream opening functions.
The xmalloc function is written in a way that either 'st' is allocated
valid memory or xmalloc already dies.
The function calls to open_istream_* do not change 'st', as the pointer is
passed by reference and not a pointer of a pointer.
Hence 'st' cannot be null at that part of the code.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Sparse issues some "Using plain integer as NULL pointer" warnings.
Each warning relates to the use of an '{0}' initialiser expression
in the declaration of an 'struct object_info'. The first field of
this structure has pointer type. Thus, in order to suppress these
warnings, we replace the initialiser expression with '{NULL}'.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Each caller of sha1_object_info_extended sets up an
object_info struct to tell the function which elements of
the object it wants to get. Until now, getting the type of
the object has always been required (and it is returned via
the return type rather than a pointer in object_info).
This can involve actually opening a loose object file to
determine its type, or following delta chains to determine a
packed file's base type. These effects produce a measurable
slow-down when doing a "cat-file --batch-check" that does
not include %(objecttype).
This patch adds a "typep" query to struct object_info, so
that it can be optionally queried just like size and
disk_size. As a result, the return type of the function is
no longer the object type, but rather 0/-1 for success/error.
As there are only three callers total, we just fix up each
caller rather than keep a compatibility wrapper:
1. The simpler sha1_object_info wrapper continues to
always ask for and return the type field.
2. The istream_source function wants to know the type, and
so always asks for it.
3. The cat-file batch code asks for the type only when
%(objecttype) is part of the format string.
On linux.git, the best-of-five for running:
$ git rev-list --objects --all >objects
$ time git cat-file --batch-check='%(objectsize:disk)'
on a fully packed repository goes from:
real 0m8.680s
user 0m8.160s
sys 0m0.512s
to:
real 0m7.205s
user 0m6.580s
sys 0m0.608s
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sha1_object_info_extended function expects the caller to
provide a "struct object_info" which contains pointers to
"query" items that will be filled in. The purpose of
providing pointers rather than storing the response directly
in the struct is so that callers can choose not to incur the
expense in finding particular fields that they do not care
about.
Right now the only query item is "sizep", and all callers
set it explicitly to choose whether or not to query it; they
can then leave the rest of the struct uninitialized.
However, as we add new query items, each caller will have to
be updated to explicitly turn off the new ones (by setting
them to NULL). Instead, let's teach each caller to
zero-initialize the struct, so that they do not have to
learn about each new query item added.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The read_istream_loose function loops on inflating a chunk of data
from an mmap'd loose object. We end the loop when we run out
of space in our output buffer, or if we see a zlib error.
We need to treat Z_BUF_ERROR specially, though, as it is not
fatal; it is just zlib's way of telling us that we need to
either feed it more input or give it more output space. It
is perfectly normal for us to hit this when we are at the
end of our buffer.
However, we may also get Z_BUF_ERROR because we have run out
of input. In a well-formed object, this should not happen,
because we have fed the whole mmap'd contents to zlib. But
if the object is truncated or corrupt, we will loop forever,
never giving zlib any more data, but continuing to ask it to
inflate.
We can fix this by considering it an error when zlib returns
Z_BUF_ERROR but we still have output space left (which means
it must want more input, which we know is a truncation
error). It would not be sufficient to just check whether
zlib had consumed all the input at the start of the loop, as
it might still want to generate output from what is in its
internal state.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The filter istream pulls data from an "upstream" stream,
running it through a filter function. However, we did not
properly notice when the upstream filter yielded an error,
and just returned what we had read. Instead, we should
propagate the error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
