| Age | Commit message (Collapse) | Author |
|---|
|
The previous commit implemented a C version of the t0021/rot13-filter.pl
script. Let's use this new C helper to eliminate the PERL prereq from
various tests, and also remove the superseded Perl script.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This test sets the t0021/rot13-filter.pl script as a long-running
process filter for a git checkout command. It then expects the filter to
fail producing a specific error message at stderr. In the following
commits we are going to replace the script with a C test-tool helper,
but the test currently expects the error message in a Perl-specific
format. That is, when you call `die <msg>` in Perl, it emits
"<msg> at - line 1." In preparation for the conversion, let's avoid the
Perl-specific part and only grep for <msg> itself.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
At the end of `git checkout <pathspec>`, we get a message informing how
many entries were updated in the working tree. However, this number can
be inaccurate for two reasons:
1) Delayed entries currently get counted twice.
2) Failed entries are included in the count.
The first problem happens because the counter is first incremented
before inserting the entry in the delayed checkout queue, and once again
when finish_delayed_checkout() calls checkout_entry(). And the second
happens because the counter is incremented too early in
checkout_entry(), before the entry was in fact checked out. Fix that by
moving the count increment further down in the call stack and removing
the duplicate increment on delayed entries. Note that we have to keep
a per-entry reference for the counter (both on parallel checkout and
delayed checkout) because not all entries are always accumulated at the
same counter. See checkout_worktree(), at builtin/checkout.c for an
example.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
At the end of a `git checkout <pathspec>` operation, git reports how
many paths were checked out with a message like "Updated N paths from
the index". However, entries that end up on the delayed checkout queue
(as requested by a long-running process filter) get counted twice,
producing a wrong number in the final report. We will fix this bug in an
upcoming commit. For now, only document/demonstrate it with a
test_expect_failure.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Failures within `for` and `while` loops can go unnoticed if not detected
and signaled manually since the loop itself does not abort when a
contained command fails, nor will a failure necessarily be detected when
the loop finishes since the loop returns the exit code of the last
command it ran on the final iteration, which may not be the command
which failed. Therefore, detect and signal failures manually within
loops using the idiom `|| return 1` (or `|| exit 1` within subshells).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The top-level &&-chain checker built into t/test-lib.sh causes tests to
magically exit with code 117 if the &&-chain is broken. However, it has
the shortcoming that the magic does not work within `{...}` groups,
`(...)` subshells, `$(...)` substitutions, or within bodies of compound
statements, such as `if`, `for`, `while`, `case`, etc. `chainlint.sed`
partly fills in the gap by catching broken &&-chains in `(...)`
subshells, but bugs can still lurk behind broken &&-chains in the other
cases.
Fix broken &&-chains in `{...}` groups in order to reduce the number of
possible lurking bugs.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Take advantage of here-docs to create large blocks of text rather than
using a series of `echo` statements. Not only are here-docs a natural
fit for such a task, but there is less opportunity for a broken
&&-chain.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'Filtering contents...' progress report from delayed checkout is
displayed even when checkout and clone are invoked with --quiet or
--no-progress. Furthermore, it is displayed unconditionally, without
first checking whether stdout is a tty. Let's fix these issues and also
add some regression tests for the two code paths that currently use
delayed checkout: unpack_trees.c:check_updates() and
builtin/checkout.c:checkout_worktree().
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We had a code to diagnose and die cleanly when a required
clean/smudge filter is missing, but an assert before that
unnecessarily fired, hiding the end-user facing die() message.
* mt/cleanly-die-upon-missing-required-filter:
convert: fail gracefully upon missing clean cmd on required filter
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The gitattributes documentation mentions that either the clean cmd or
the smudge cmd can be left unspecified in a filter definition. However,
when the filter is marked as 'required', the absence of any one of these
two should be treated as an error. Git already fails under these
circumstances, but not always in a pleasant way: omitting a clean cmd in
a required filter triggers an assertion error which leaves the user with
a quite verbose message:
git: convert.c:1459: convert_to_git_filter_fd: Assertion "ca.drv->clean || ca.drv->process" failed.
This assertion is not really necessary, as the apply_filter() call below
it already performs the same check. And when this condition is not met,
the function returns 0, making the caller die() with a much nicer
message. (Also note that die()-ing here is the right behavior as
`would_convert_to_git_filter_fd() == true` is a precondition to use
convert_to_git_filter_fd(), and the former is only true when the filter
is required.) So remove the assertion and add two regression tests to
make sure that git fails nicely when either the smudge or clean command
is missing on a required filter.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-2.29:
Git 2.29.3
Git 2.28.1
Git 2.27.1
Git 2.26.3
Git 2.25.5
Git 2.24.4
Git 2.23.4
Git 2.22.5
Git 2.21.4
Git 2.20.5
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
|
|
* maint-2.26:
Git 2.26.3
Git 2.25.5
Git 2.24.4
Git 2.23.4
Git 2.22.5
Git 2.21.4
Git 2.20.5
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
|
|
* maint-2.25:
Git 2.25.5
Git 2.24.4
Git 2.23.4
Git 2.22.5
Git 2.21.4
Git 2.20.5
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
|
|
* maint-2.24:
Git 2.24.4
Git 2.23.4
Git 2.22.5
Git 2.21.4
Git 2.20.5
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
|
|
* maint-2.23:
Git 2.23.4
Git 2.22.5
Git 2.21.4
Git 2.20.5
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
|
|
* maint-2.20:
Git 2.20.5
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
|
|
* maint-2.19:
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
|
|
* maint-2.18:
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
|
|
* maint-2.17:
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
|
|
In the previous commit, we intercepted calls to `rmdir()` to invalidate
the lstat cache in the successful case, so that the lstat cache could
not have the idea that a directory exists where there is none.
The same situation can arise, of course, when a separate process is
spawned (most notably, this is the case in `submodule_move_head()`).
Obviously, we cannot know whether a directory was removed in that
process, therefore we must invalidate the lstat cache afterwards.
Note: in contrast to `lstat_cache_aware_rmdir()`, we invalidate the
lstat cache even in case of an error: the process might have removed a
directory and still have failed afterwards.
Co-authored-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
|
|
Before checking out a file, we have to confirm that all of its leading
components are real existing directories. And to reduce the number of
lstat() calls in this process, we cache the last leading path known to
contain only directories. However, when a path collision occurs (e.g.
when checking out case-sensitive files in case-insensitive file
systems), a cached path might have its file type changed on disk,
leaving the cache on an invalid state. Normally, this doesn't bring
any bad consequences as we usually check out files in index order, and
therefore, by the time the cached path becomes outdated, we no longer
need it anyway (because all files in that directory would have already
been written).
But, there are some users of the checkout machinery that do not always
follow the index order. In particular: checkout-index writes the paths
in the same order that they appear on the CLI (or stdin); and the
delayed checkout feature -- used when a long-running filter process
replies with "status=delayed" -- postpones the checkout of some entries,
thus modifying the checkout order.
When we have to check out an out-of-order entry and the lstat() cache is
invalid (due to a previous path collision), checkout_entry() may end up
using the invalid data and thrusting that the leading components are
real directories when, in reality, they are not. In the best case
scenario, where the directory was replaced by a regular file, the user
will get an error: "fatal: unable to create file 'foo/bar': Not a
directory". But if the directory was replaced by a symlink, checkout
could actually end up following the symlink and writing the file at a
wrong place, even outside the repository. Since delayed checkout is
affected by this bug, it could be used by an attacker to write
arbitrary files during the clone of a maliciously crafted repository.
Some candidate solutions considered were to disable the lstat() cache
during unordered checkouts or sort the entries before passing them to
the checkout machinery. But both ideas include some performance penalty
and they don't future-proof the code against new unordered use cases.
Instead, we now manually reset the lstat cache whenever we successfully
remove a directory. Note: We are not even checking whether the directory
was the same as the lstat cache points to because we might face a
scenario where the paths refer to the same location but differ due to
case folding, precomposed UTF-8 issues, or the presence of `..`
components in the path. Two regression tests, with case-collisions and
utf8-collisions, are also added for both checkout-index and delayed
checkout.
Note: to make the previously mentioned clone attack unfeasible, it would
be sufficient to reset the lstat cache only after the remove_subtree()
call inside checkout_entry(). This is the place where we would remove a
directory whose path collides with the path of another entry that we are
currently trying to check out (possibly a symlink). However, in the
interest of a thorough fix that does not leave Git open to
similar-but-not-identical attack vectors, we decided to intercept
all `rmdir()` calls in one fell swoop.
This addresses CVE-2021-21300.
Co-authored-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
|
|
Use only https links for lore.kernel.org.
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Carefully excluding t1309, which sees independent development elsewhere
at the time of writing, we transition above-mentioned tests to the
default branch name `main`. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -e 's/naster/nain/g' -- t[01]*.sh &&
git checkout HEAD -- t1309\*)
Note that t5533 contains a variation of the name `master` (`naster`)
that we rename here, too.
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 8de7eeb54b6 (compression: unify pack.compression configuration
parsing, 2016-11-15), we introduced identical copies of the `file_size`
helper into three test scripts, with the plan to eventually consolidate
them into a single copy.
Let's do that, and adjust the function name to adhere to the `test_*`
naming convention.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Check that we get the expected data when performing a merges or
generating archives. Note that we don't expect a ref for merges,
because we won't be checking out any particular ref, but instead a tree
of the merged data. For archives, however, we expect a ref as normal if
we have one.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Pass the commit, and if we have it, the ref to the filters when we
perform a checkout. This should only be the case when we invoke git
reset --hard; the metadata will be unused otherwise.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When checking out a commit, provide metadata to the filter process
including the ref we're using.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Provide commit metadata for checkout code paths that use unpack_trees
and friends. When we're checking out a commit, use the commit
information, but don't provide commit information if we're checking out
from the index, since there need not be any particular commit associated
with the index, and even if there is one, we can't know what it is.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We `cat` files, but don't inspect or grab the contents in any way.
Unlike in an earlier commit, there is no reason to suspect that these
files could be missing, so `cat`-ing them is just wasted effort.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc update for the mailing list archiving and nntp service.
* jk/lore-is-the-archive:
doc: replace public-inbox links with lore.kernel.org
doc: recommend lore.kernel.org over public-inbox.org
|
|
Since we're now recommending lore.kernel.org (and because the
public-inbox.org domain might eventually go away), let's update our
internal references to use it, too. That future-proofs our references,
and sets the example we want people to follow.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In t0021.15 one of the things we are checking is that the clean filter
is run when checking out empty-branch. The clean filter needs to be
run to make sure there are no modifications on the file system for the
test.r file, and thus it isn't dangerous to overwrite it.
However in the current test setup it is not always necessary to run
the clean filter, and thus the test sometimes fails, as debug.log
isn't written.
This happens when test.r has an older mtime than the index itself.
That mtime is also recorded as stat data for test.r in the index, and
based on the heuristic we're using for index entries, git correctly
assumes this file is up-to-date.
Usually this test succeeds because the mtime of test.r is the same as
the mtime of the index. In this case test.r is racily clean, so git
actually checks the contents, for which the clean filter is run.
Fix the test by updating the mtime of test.r, so git is forced to
check the contents of the file, and the clean filter is run as the
test expects.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is a bit ridiculous to spin up a full-blown Perl instance (especially
on Windows, where that means spinning up a full POSIX emulation layer,
AKA the MSYS2 runtime) just to tell how large a given file is.
So let's just use the test-tool to do that job instead.
This command will also be used over the next commits, to allow for
cutting out individual test cases' verbose log from the file generated
via --verbose-log.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix various places where the ordering was obviously wrong, meaning it
was easy to find with grep.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many more strings are prepared for l10n.
* nd/i18n: (23 commits)
transport-helper.c: mark more strings for translation
transport.c: mark more strings for translation
sha1-file.c: mark more strings for translation
sequencer.c: mark more strings for translation
replace-object.c: mark more strings for translation
refspec.c: mark more strings for translation
refs.c: mark more strings for translation
pkt-line.c: mark more strings for translation
object.c: mark more strings for translation
exec-cmd.c: mark more strings for translation
environment.c: mark more strings for translation
dir.c: mark more strings for translation
convert.c: mark more strings for translation
connect.c: mark more strings for translation
config.c: mark more strings for translation
commit-graph.c: mark more strings for translation
builtin/replace.c: mark more strings for translation
builtin/pack-objects.c: mark more strings for translation
builtin/grep.c: mark strings for translation
builtin/config.c: mark more strings for translation
...
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor, into a common function, the version and capability negotiation
done when invoking a long-running process as a clean or smudge filter.
This will be useful for other Git code that needs to interact similarly
with a long-running process.
As you can see in the change to t0021, this commit changes the error
message reported when the long-running process does not introduce itself
with the expected "server"-terminated line. Originally, the error
message reports that the filter "does not support filter protocol
version 2", differentiating between the old single-file filter protocol
and the new multi-file filter protocol - I have updated it to something
more generic and useful.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some `clean` / `smudge` filters may require a significant amount of
time to process a single blob (e.g. the Git LFS smudge filter might
perform network requests). During this process the Git checkout
operation is blocked and Git needs to wait until the filter is done to
continue with the checkout.
Teach the filter process protocol, introduced in edcc8581 ("convert: add
filter.<driver>.process option", 2016-10-16), to accept the status
"delayed" as response to a filter request. Upon this response Git
continues with the checkout operation. After the checkout operation Git
calls "finish_delayed_checkout" which queries the filter for remaining
blobs. If the filter is still working on the completion, then the filter
is expected to block. If the filter has completed all remaining blobs
then an empty response is expected.
Git has a multiple code paths that checkout a blob. Support delayed
checkouts only in `clone` (in unpack-trees.c) and `checkout` operations
for now. The optimization is most effective in these code paths as all
files of the tree are processed.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"rot13-filter.pl" always writes "OUT <size>" to the debug log at the end
of a response.
This works perfectly for the existing responses "abort", "error", and
"success". A new response "delayed", that will be introduced in a
subsequent patch, accepts the input without giving the filtered result
right away. At this point we cannot know the size of the response.
Therefore, we do not write "OUT <size>" for "delayed" responses.
To simplify the code we do not write "OUT <size>" for "abort" and
"error" responses either as their size is always zero.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "rot13-filter.pl" helper wrote its debug logs always to "rot13-filter.log".
Make this configurable by defining the log file as first parameter of
"rot13-filter.pl".
This is useful if "rot13-filter.pl" is configured multiple times similar to the
subsequent patch 'convert: add "status=delayed" to filter process protocol'.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The filter log files are modified on comparison. That might be
unexpected by the caller. It would be even undesirable if the caller
wants to reuse the original log files.
Address these issues by using temp files for modifications. This is
useful for the subsequent patch 'convert: add "status=delayed" to
filter process protocol'.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc update.
* ls/filter-process:
t0021: fix flaky test
docs: warn about possible '=' in clean/smudge filter process values
|
|
* ls/t0021-fixup:
t0021: minor filter process test cleanup
|
|
t0021.15 creates files, adds them to the index, and commits them. All
this usually happens in a test run within the same second and Git cannot
know if the files have been changed between `add` and `commit`. Thus,
Git has to run the clean filter in both operations. Sometimes these
invocations spread over two different seconds and Git can infer that the
files were not changed between `add` and `commit` based on their
modification timestamp. The test would fail as it expects the filter
invocation. Remove this expectation to make the test stable.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A pathname value in a clean/smudge filter process "key=value" pair can
contain the '=' character (introduced in edcc858). Make the user aware
of this issue in the docs, add a corresponding test case, and fix the
issue in filter process value parser of the example implementation in
contrib.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
