| Age | Commit message (Collapse) | Author |
|---|
|
"rebase -i" segfaulted when rearranging a sequence that has a
fix-up that applies another fix-up (which may or may not be a
fix-up of yet another step).
* js/rebase-autosquash-double-fixup-fix:
rebase --autosquash: fix a potential segfault
|
|
When rearranging the todo list so that the fixups/squashes are reordered
just after the commits they intend to fix up, we use two arrays to
maintain that list: `next` and `tail`.
The idea is that `next[i]`, if set to a non-negative value, contains the
index of the item that should be rearranged just after the `i`th item.
To avoid having to walk the entire `next` chain when appending another
fixup/squash, we also store the end of the `next` chain in `tail[i]`.
The logic we currently use to update these array items is based on the
assumption that given a fixup/squash item at index `i`, we just found
the index `i2` indicating the first item in that fixup chain.
However, as reported by Paul Ganssle, that need not be true: the special
form `fixup! <commit-hash>` is allowed to point to _another_ fixup
commit in the middle of the fixup chain.
Example:
* 0192a To fixup
* 02f12 fixup! To fixup
* 03763 fixup! To fixup
* 04ecb fixup! 02f12
Note how the fourth commit targets the second commit, which is already a
fixup that targets the first commit.
Previously, we would update `next` and `tail` under our assumption that
every `fixup!` commit would find the start of the `fixup!`/`squash!`
chain. This would lead to a segmentation fault because we would actually
end up with a `next[i]` pointing to a `fixup!` but the corresponding
`tail[i]` pointing nowhere, which would the lead to a segmentation
fault.
Let's fix this by _inserting_, rather than _appending_, the item. In
other words, if we make a given line successor of another line, we do
not simply forget any previously set successor of the latter, but make
it a successor of the former.
In the above example, at the point when we insert 04ecb just after
02f12, 03763 would already be recorded as a successor of 04ecb, and we
now "squeeze in" 04ecb.
To complete the idea, we now no longer assume that `next[i]` pointing to
a line means that `last[i]` points to a line, too. Instead, we extend
the concept of `last` to cover also partial `fixup!`/`squash!` chains,
i.e. chains starting in the middle of a larger such chain.
In the above example, after processing all lines, `last[0]`
(corresponding to 0192a) would point to 03763, which indeed is the end
of the overall `fixup!` chain, and `last[1]` (corresponding to 02f12)
would point to 04ecb (which is the last `fixup!` targeting 02f12, but it
has 03763 as successor, i.e. it is not the end of overall `fixup!`
chain).
Reported-by: Paul Ganssle <paul@ganssle.io>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We are using `test_must_fail test_auto_{fixup,squash}` which would
ensure that the function failed. However, this is a little ham-fisted as
there is no way of ensuring that the expected part of the function
actually fails.
Increase the granularity by accepting an optional `!` first argument
which will check that the rebase does not squash in any commits by
ensuring that there are still 4 commits. If `!` is not provided, the old
logic is run.
This patch may be better reviewed with `--ignore-all-space`.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix invocations of git commands so their exit codes are not lost
within non-assignment command substitutions.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In quite a few test cases, we were sloppy and used the abbreviation
`--force`, but we really should be precise in what we want to test.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When an interactive rebase was stopped at the end of a fixup/squash
chain, the user might have edited the commit manually before continuing
(with either `git rebase --skip` or `git rebase --continue`, it does not
really matter which).
We need to be very careful to wrap up the fixup/squash chain also in
this scenario: otherwise the next fixup/squash chain would try to pick
up where the previous one was left.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
|
|
The `git commit --squash` command can be used not only to amend commit
messages and changes, but also to record notes for an upcoming rebase.
For example, when the author information of a given commit is incorrect,
a user might call `git commit --allow-empty -m "Fix author" --squash
<commit>`, to remind them to fix that during the rebase. When the editor
would pop up, the user would simply delete the commit message to abort
the rebase at this stage, fix the author information, and continue with
`git rebase --skip`. (This is a real-world example from the rebase of
Git for Windows onto v2.19.0-rc1.)
However, there is a bug in `git rebase` that will cause the squash
message *not* to be forgotten in this case. It will therefore be reused
in the next fixup/squash chain (if any).
This patch adds a test case to demonstrate this breakage.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
|
|
This operation has quadratic complexity, which is especially painful
on Windows, where shell scripts are *already* slow (mainly due to the
overhead of the POSIX emulation layer).
Let's reimplement this with linear complexity (using a hash map to
match the commits' subject lines) for the common case; Sadly, the
fixup/squash feature's design neglected performance considerations,
allowing arbitrary prefixes (read: `fixup! hell` will match the
commit subject `hello world`), which means that we are stuck with
quadratic performance in the worst case.
The reimplemented logic also happens to fix a bug where commented-out
lines (representing empty patches) were dropped by the previous code.
While at it, clarify how the fixup/squash feature works in `git rebase
-i`'s man page.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `git commit --fixup` command unwraps wrapped onelines when
constructing the commit message, without wrapping the result.
We need to make sure that `git rebase --autosquash` keeps handling such
cases correctly, in particular since we are about to move the autosquash
handling into the rebase--helper.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An upcoming patch will move the todo list generation into the
rebase--helper. An early version of that patch regressed on an empty
rebase.instructionFormat value (the shell version could not discern
between an empty one and a non-existing one, but the C version used the
empty one as if that was intended to skip the oneline from the `pick
<hash>` lines).
Let's verify that this still works as before.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The GETTEXT_POISON=YesPlease compile-time testing option added in my
bb946bba76 ("i18n: add GETTEXT_POISON to simulate unfriendly
translator", 2011-02-22) has been slowly bitrotting as strings have
been marked for translation, and new tests have been added without
running it.
I brought this up on the list ("[BUG] test suite broken with
GETTEXT_POISON=YesPlease", [1]) asking whether this mode was useful at
all anymore. At least one person occasionally uses it, and Lars
Schneider offered to change one of the the Travis builds to run in
this mode, so fix up the failing ones.
My test setup runs most of the tests, with the notable exception of
skipping all the p4 tests, so it's possible that there's still some
lurking regressions I haven't fixed.
1. <CACBZZX62+acvi1dpkknadTL827mtCm_QesGSZ=6+UnyeMpg8+Q@mail.gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This new test case ensures that we handle commit messages that start
with fixup! or squash! followed by more than one space. While we do
not generate such messages when committing with --fixup/--squash, it
is perfectly legal for users to hand-craft their own fixup messages,
and we heed Postel's law by being lenient.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When rearranging the edit script, we happily mistake the comment
character for a command, and the command for a SHA-1. As a consequence,
when we move fixup! and squash! commits, our logic to skip lines with
already handled SHA-1s mistakenly skips anything but the first
commented-out pick line, too.
The upcoming rebase--helper patches will address this bug, therefore we
do not need to make the current autosquash code even more complex than
it already is, just to fix this bug.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A config option 'rebase.instructionFormat' can override the
default 'oneline' format of the rebase instruction list.
Since the list is parsed using the left, right or boundary mark plus
the sha1, they are prepended to the instruction format.
Signed-off-by: Michael Rappazzo <rappazzo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In rebase -i --autosquash, ignore all "fixup! " or "squash! " after the
first. This supports the case when a git commit --fixup/--squash referred
to an earlier fixup/squash instead of the original commit (whether
intentionally, as when the user expressly meant to note that the commit
fixes an earlier fixup; or inadvertently, as when the user meant to refer to
the original commit with :/msg; or out of laziness, as when the user could
remember how to refer to the fixup but not the original).
In the todo list, the full commit message is preserved, in case it provides
useful cues to the user. A test helper set_cat_todo_editor is introduced to
check this.
Helped-by: Thomas Rast <trast@inf.ethz.ch>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Andrew Pimlott <andrew@pimlott.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prefer:
test_line_count <OP> COUNT FILE
over:
test $(wc -l <FILE) <OP> COUNT
(or similar usages) in several tests.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* pn/commit-autosquash:
add tests of commit --squash
commit: --squash option for use with rebase --autosquash
add tests of commit --fixup
commit: --fixup option for use with rebase --autosquash
pretty.c: teach format_commit_message() to reencode the output
commit: helper methods to reduce redundant blocks of code
Conflicts:
Documentation/git-commit.txt
t/t3415-rebase-autosquash.sh
|
|
Support lines of the form "fixup! 7a235b" that specify an exact commit
in addition to the normal "squash! Old commit message" form.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current behvaior of --autosquash can duplicate fixup!/squash! lines
if they match multiple commits, and it can also apply them to commits
that come after them in the todo list. Even more oddly, a commit that
looks like "fixup! fixup!" will match itself and be duplicated in the
todo list.
Change the todo list rearranging to mark all commits as used as soon
as they are emitted, and to avoid emitting a fixup/squash commit if the
commit has already been marked as used.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
t7500: test expected behavior of commit --squash
t3415: test interaction of commit --squash with rebase --autosquash
t3900: test commit --squash with i18n encodings
Signed-off-by: Pat Notz <patnotz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
t7500: test expected behavior of commit --fixup
t3415: test interaction of commit --fixup with rebase --autosquash
t3900: test commit --fixup with i18n encodings
Signed-off-by: Pat Notz <patnotz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If you use this feature regularly you can now enable it by default. In
case the user wants to override this config on the commandline
--no-autosquash can be used to force disabling.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach a new option, --autosquash, to the interactive rebase.
When the commit log message begins with "!fixup ...", and there
is a commit whose title begins with the same ..., automatically
modify the todo list of rebase -i so that the commit marked for
squashing come right after the commit to be modified, and change
the action of the moved commit from pick to squash.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
