| Age | Commit message (Collapse) | Author |
|---|
|
This commit fixes a bug when parsing tags that have CRLF line endings, a
signature, and no body, like this (the "^M" are marking the CRs):
this is the subject^M
-----BEGIN PGP SIGNATURE-----^M
^M
...some stuff...^M
-----END PGP SIGNATURE-----^M
When trying to find the start of the body, we look for a blank line
separating the subject and body. In this case, there isn't one. But we
search for it using strstr(), which will find the blank line in the
signature.
In the non-CRLF code path, we check whether the line we found is past
the start of the signature, and if so, put the body pointer at the start
of the signature (effectively making the body empty). But the CRLF code
path doesn't catch the same case, and we end up with the body pointer in
the middle of the signature field. This has two visible problems:
- printing %(contents:subject) will show part of the signature, too,
since the subject length is computed as (body - subject)
- the length of the body is (sig - body), which makes it negative.
Asking for %(contents:body) causes us to cast this to a very large
size_t when we feed it to xmemdupz(), which then complains about
trying to allocate too much memory.
These are essentially the same bugs fixed in the previous commit, except
that they happen when there is a CRLF blank line in the signature,
rather than no blank line at all. Both are caused by the refactoring in
9f75ce3d8f (ref-filter: handle CRLF at end-of-line more gracefully,
2020-10-29).
We can fix this by doing the same "sigstart" check that we do in the
non-CRLF case. And rather than repeat ourselves, we can just use
short-circuiting OR to collapse both cases into a single conditional.
I.e., rather than:
if (strstr("\n\n"))
...found blank, check if it's in signature...
else if (strstr("\r\n\r\n"))
...found blank, check if it's in signature...
else
...no blank line found...
we can collapse this to:
if (strstr("\n\n")) ||
strstr("\r\n\r\n")))
...found blank, check if it's in signature...
else
...no blank line found...
The tests show the problem and the fix. Though it wasn't broken, I
included contents:signature here to make sure it still behaves as
expected, but note the shell hackery needed to make it work. A
less-clever option would be to skip using test_atom and just "append_cr
>expected" ourselves.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
When ref-filter is asked to show %(content:subject), etc, we end up in
find_subpos() to parse out the three major parts: the subject, the body,
and the signature (if any).
When searching for the blank line between the subject and body, if we
don't find anything, we try to treat the whole message as the subject,
with no body. But our idea of "the whole message" needs to take into
account the signature, too. Since 9f75ce3d8f (ref-filter: handle CRLF at
end-of-line more gracefully, 2020-10-29), the code instead goes all the
way to the end of the buffer, which produces confusing output.
Here's an example. If we have a tag message like this:
this is the subject
-----BEGIN SSH SIGNATURE-----
...some stuff...
-----END SSH SIGNATURE-----
then the current parser will put the start of the body at the end of the
whole buffer. This produces two buggy outcomes:
- since the subject length is computed as (body - subject), showing
%(contents:subject) will print both the subject and the signature,
rather than just the single line
- since the body length is computed as (sig - body), and the body now
starts _after_ the signature, we end up with a negative length!
Fortunately we never access out-of-bounds memory, because the
negative length is fed to xmemdupz(), which casts it to a size_t,
and xmalloc() bails trying to allocate an absurdly large value.
In theory it would be possible for somebody making a malicious tag
to wrap it around to a more reasonable value, but it would require a
tag on the order of 2^63 bytes. And even if they did, all they get
is an out of bounds string read. So the security implications are
probably not interesting.
We can fix both by correctly putting the start of the body at the same
index as the start of the signature (effectively making the body empty).
Note that this is a real issue with signatures generated with gpg.format
set to "ssh", which would look like the example above. In the new tests
here I use a hard-coded tag message, for a few reasons:
- regardless of what the ssh-signing code produces now or in the
future, we should be testing this particular case
- skipping the actual signature makes the tests simpler to write (and
allows them to run on more systems)
- t6300 has helpers for working with gpg signatures; for the purposes
of this bug, "BEGIN PGP" is just as good a demonstration, and this
simplifies the tests
Curiously, the same issue doesn't happen with real gpg signatures (and
there are even existing tests in t6300 with cover this). Those have a
blank line between the header and the content, like:
this is the subject
-----BEGIN PGP SIGNATURE-----
...some stuff...
-----END PGP SIGNATURE-----
Because we search for the subject/body separator line with a strstr(),
we find the blank line in the signature, even though it's outside of
what we'd consider the body. But that puts us unto a separate code path,
which realizes that we're now in the signature and adjusts the line back
to "sigstart". So this patch is basically just making the "no line found
at all" case match that. And note that "sigstart" is always defined (if
there is no signature, it points to the end of the buffer as you'd
expect).
Reported-by: Martin Englund <martin@englund.nu>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
Broken &&-chains in the test scripts have been corrected.
* es/test-chain-lint:
t6000-t9999: detect and signal failure within loop
t5000-t5999: detect and signal failure within loop
t4000-t4999: detect and signal failure within loop
t0000-t3999: detect and signal failure within loop
tests: simplify by dropping unnecessary `for` loops
tests: apply modern idiom for exiting loop upon failure
tests: apply modern idiom for signaling test failure
tests: fix broken &&-chains in `{...}` groups
tests: fix broken &&-chains in `$(...)` command substitutions
tests: fix broken &&-chains in compound statements
tests: use test_write_lines() to generate line-oriented output
tests: simplify construction of large blocks of text
t9107: use shell parameter expansion to avoid breaking &&-chain
t6300: make `%(raw:size) --shell` test more robust
t5516: drop unnecessary subshell and command invocation
t4202: clarify intent by creating expected content less cleverly
t1020: avoid aborting entire test script when one test fails
t1010: fix unnoticed failure on Windows
t/lib-pager: use sane_unset() to avoid breaking &&-chain
|
|
Failures within `for` and `while` loops can go unnoticed if not detected
and signaled manually since the loop itself does not abort when a
contained command fails, nor will a failure necessarily be detected when
the loop finishes since the loop returns the exit code of the last
command it ran on the final iteration, which may not be the command
which failed. Therefore, detect and signal failures manually within
loops using the idiom `|| return 1` (or `|| exit 1` within subshells).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This test populates its `expect` file solely by appending content but
fails to ensure that the file starts out empty. The test succeeds only
because no earlier test populated a file of the exact same name, however
this is an accident waiting to happen. Make the test more robust by
ensuring that it contains exactly the intended content.
While at it, simplify the implementation via a straightforward `sed`
application and by avoiding dropping out of the single-quote context
within the test body (thus eliminating a hard-to-digest combination of
apostrophes and backslashes).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A couple of test scripts have actually been adapted to accommodate for a
configurable default branch name, but they still overrode it via the
`GIT_TEST_*` variable. Let's drop that override where possible.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The for-each-ref family of commands invoke parsers immediately when
it sees each --sort=<atom> option, and die before even seeing the
other options on the command line when the <atom> is unrecognised.
Instead, accumulate them in a string list, and have them parsed into
a ref_sorting structure after the command line parsing is done. As
a consequence, "git branch --sort=bogus -h" used to fail to give the
brief help, which arguably may have been a feature, now does so,
which is more consistent with how other options work.
The patch is smaller than the actual extent of the "damage" to the
codebase, thanks to the fact that the original code consistently
used OPT_REF_SORT() macro to handle command line options. We only
needed to replace the variable used for the list, and implementation
of the callback function used in the macro.
The old rule was for the users of the API to:
- Declare ref_sorting and ref_sorting_tail variables;
- OPT_REF_SORT() macro will instantiate ref_sorting instance (which
may barf and die) and append it to the tail;
- Append to the tail each ref_sorting read from the configuration
by parsing in the config callback (which may barf and die);
- See if ref_sorting is null and use ref_sorting_default() instead.
Now the rule is not all that different but is simpler:
- Declare ref_sorting_options string list.
- OPT_REF_SORT() macro will append it to the string list;
- Append to the string list the sort key read from the
configuration;
- call ref_sorting_options() to turn the string list to ref_sorting
structure (which also deals with the default value).
As side effects, this change also cleans up a few issues:
- 95be717c (parse_opt_ref_sorting: always use with NONEG flag,
2019-03-20) muses that "git for-each-ref --no-sort" should simply
clear the sort keys accumulated so far; it now does.
- The implementation detail of "struct ref_sorting" and the helper
function parse_ref_sorting() can now be private to the ref-filter
API implementation.
- If you set branch.sort to a bogus value, the any "git branch"
invocation, not only the listing mode, would abort with the
original code; now it doesn't
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test fix.
* dd/t6300-wo-gpg-fix:
t6300: check for cat-file exit status code
t6300: don't run cat-file on non-existent object
|
|
In test_atom(), we're piping the output of cat-file to tail(1),
thus, losing its exit status.
Let's use a temporary file to preserve git exit status code.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In t6300, some tests are guarded behind some prerequisites.
Thus, objects created by those tests ain't available if those
prerequisites are unsatistified. Attempting to run "cat-file"
on those objects will run into failure.
In fact, running t6300 in an environment without gpg(1),
we'll see those warnings:
fatal: Not a valid object name refs/tags/signed-empty
fatal: Not a valid object name refs/tags/signed-short
fatal: Not a valid object name refs/tags/signed-long
Let's put those commands into the real tests, in order to:
* skip their execution if prerequisites aren't satistified.
* check their exit status code
The expected value for objects with type: commit needs to be
computed outside the test because we can't rely on "$3" there.
Furthermore, to prevent the accidental usage of that computed
expected value, BUG out on unknown object's type.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
%(rest) is a atom used for cat-file batch mode, which can split
the input lines at the first whitespace boundary, all characters
before that whitespace are considered to be the object name;
characters after that first run of whitespace (i.e., the "rest"
of the line) are output in place of the %(rest) atom.
In order to let "cat-file --batch=%(rest)" use the ref-filter
interface, add %(rest) atom for ref-filter.
Introduce the reject_atom() to reject the atom %(rest) for
"git for-each-ref", "git branch", "git tag" and "git verify-tag".
Reviewed-by: Jacob Keller <jacob.keller@gmail.com>
Suggected-by: Jacob Keller <jacob.keller@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Because the perl language can handle binary data correctly,
add the function perl_quote_buf_with_len(), which can specify
the length of the data and prevent the data from being truncated
at '\0' to help `--format="%(raw)"` support `--perl`.
Reviewed-by: Jacob Keller <jacob.keller@gmail.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add new formatting option `%(raw)`, which will print the raw
object data without any changes. It will help further to migrate
all cat-file formatting logic from cat-file to ref-filter.
The raw data of blob, tree objects may contain '\0', but most of
the logic in `ref-filter` depends on the output of the atom being
text (specifically, no embedded NULs in it).
E.g. `quote_formatting()` use `strbuf_addstr()` or `*._quote_buf()`
add the data to the buffer. The raw data of a tree object is
`100644 one\0...`, only the `100644 one` will be added to the buffer,
which is incorrect.
Therefore, we need to find a way to record the length of the
atom_value's member `s`. Although strbuf can already record the
string and its length, if we want to replace the type of atom_value's
member `s` with strbuf, many places in ref-filter that are filled
with dynamically allocated mermory in `v->s` are not easy to replace.
At the same time, we need to check if `v->s == NULL` in
populate_value(), and strbuf cannot easily distinguish NULL and empty
strings, but c-style "const char *" can do it. So add a new member in
`struct atom_value`: `s_size`, which can record raw object size, it
can help us add raw object data to the buffer or compare two buffers
which contain raw object data.
Note that `--format=%(raw)` cannot be used with `--python`, `--shell`,
`--tcl`, and `--perl` because if the binary raw data is passed to a
variable in such languages, these may not support arbitrary binary data
in their string variable type.
Reviewed-by: Jacob Keller <jacob.keller@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Hariom Verma <hariom18599@gmail.com>
Helped-by: Bagas Sanjaya <bagasdotme@gmail.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Felipe Contreras <felipe.contreras@gmail.com>
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Junio C Hamano <gitster@pobox.com>
Based-on-patch-by: Olga Telezhnaya <olyatelezhnaya@gmail.com>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test clean-up.
* ab/detox-gettext-tests:
tests: remove all uses of test_i18cmp
|
|
A NULL-dereference bug has been corrected in an error codepath in
"git for-each-ref", "git branch --list" etc.
* jk/ref-filter-segfault-fix:
ref-filter: fix NULL check for parse object failure
|
|
Finish the removal I started in 1108cea7f8e (tests: remove most uses
of test_i18ncmp, 2021-02-11). At that time the function wasn't removed
due to disruption with in-flight changes, remove the occurrences that
have landed since then.
As of writing this there are no test_i18ncmp uses between "master" and
"seen", so let's also remove the function to finally put it to rest.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After we run parse_object_buffer() to get an object's contents, we try
to check that the return value wasn't NULL. However, since our "struct
object" is a pointer-to-pointer, and we assign like:
*obj = parse_object_buffer(...);
it's not correct to check:
if (!obj)
That will always be true, since our double pointer will continue to
point to the single pointer (which is itself NULL). This is a regression
that was introduced by aa46a0da30 (ref-filter: use oid_object_info() to
get object, 2018-07-17); since that commit we'll segfault on a parse
failure, as we try to look at the NULL object pointer.
There are many ways a parse could fail, but most of them are hard to set
up in the tests (it's easy to make a bogus object, but update-ref will
refuse to point to it). The test here uses a tag which points to a wrong
object type. A parse of just the broken tag object will succeed, but
seeing both tag objects in the same process will lead to a parse error
(since we'll see the pointed-to object as both types).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now, ref-filter is using pretty.c logic for setting trailer options.
New to ref-filter:
:key=<K> - only show trailers with specified key.
:valueonly[=val] - only show the value part.
:separator=<SEP> - inserted between trailer lines.
:key_value_separator=<SEP> - inserted between key and value in trailer lines
Enhancement to existing options(now can take value and its optional):
:only[=val]
:unfold[=val]
'val' can be: true, on, yes or false, off, no.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a function to test trailer options. This will make tests look cleaner,
as well as will make it easier to add new tests for trailers in the future.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prepare tests not to be affected by the name of the default branch
"git init" creates.
* js/default-branch-name-tests-final-stretch: (28 commits)
tests: drop prereq `PREPARE_FOR_MAIN_BRANCH` where no longer needed
t99*: adjust the references to the default branch name "main"
tests(git-p4): transition to the default branch name `main`
t9[5-7]*: adjust the references to the default branch name "main"
t9[0-4]*: adjust the references to the default branch name "main"
t8*: adjust the references to the default branch name "main"
t7[5-9]*: adjust the references to the default branch name "main"
t7[0-4]*: adjust the references to the default branch name "main"
t6[4-9]*: adjust the references to the default branch name "main"
t64*: preemptively adjust alignment to prepare for `master` -> `main`
t6[0-3]*: adjust the references to the default branch name "main"
t5[6-9]*: adjust the references to the default branch name "main"
t55[4-9]*: adjust the references to the default branch name "main"
t55[23]*: adjust the references to the default branch name "main"
t551*: adjust the references to the default branch name "main"
t550*: adjust the references to the default branch name "main"
t5503: prepare aligned comment for replacing `master` with `main`
t5[0-4]*: adjust the references to the default branch name "main"
t5323: prepare centered comment for `master` -> `main`
t4*: adjust the references to the default branch name "main"
...
|
|
Our test suite currently only passes when `git init` uses the name
`master` for the initial branch. This would stop us from changing the
default branch name.
Let's adjust t6300 so that it does not rely on any specific default
branch name. This trick is done by (force-)renaming the initial branch
to the name `main` in the `setup` and the `:remotename and :remoteref`
test cases, and then replacing all mentions of `master` and `MASTER`
with `main` and `MAIN`, respectively.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "--format=" option to the "for-each-ref" command and friends
learned a few more tricks, e.g. the ":short" suffix that applies to
"objectname" now also can be used for "parent", "tree", etc.
* hv/ref-filter-misc:
ref-filter: add `sanitize` option for 'subject' atom
pretty: refactor `format_sanitized_subject()`
ref-filter: add `short` modifier to 'parent' atom
ref-filter: add `short` modifier to 'tree' atom
ref-filter: rename `objectname` related functions and fields
ref-filter: modify error messages in `grab_objectname()`
ref-filter: refactor `grab_objectname()`
ref-filter: support different email formats
|
|
The parser for "git for-each-ref --format=..." was too loose when
parsing the "%(trailers...)" atom, and forgot that "trailers" and
"trailers:<modifiers>" are the only two allowed forms, which has
been corrected.
* hv/ref-filter-trailers-atom-parsing-fix:
ref-filter: 'contents:trailers' show error if `:` is missing
t6300: unify %(trailers) and %(contents:trailers) tests
|
|
Currently, subject does not take any arguments. This commit introduce
`sanitize` formatting option to 'subject' atom.
`subject:sanitize` - print sanitized subject line, suitable for a filename.
e.g.
%(subject): "the subject line"
%(subject:sanitize): "the-subject-line"
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Sometimes while using 'parent' atom, user might want to see abbrev hash
instead of full 40 character hash.
Just like 'objectname', it might be convenient for users to have the
`:short` and `:short=<length>` option for printing 'parent' hash.
Let's introduce `short` option to 'parent' atom.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Sometimes while using 'tree' atom, user might want to see abbrev hash
instead of full 40 character hash.
Just like 'objectname', it might be convenient for users to have the
`:short` and `:short=<length>` option for printing 'tree' hash.
Let's introduce `short` option to 'tree' atom.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, ref-filter only supports printing email with angle brackets.
Let's add support for two more email options.
- trim : for email without angle brackets.
- localpart : for the part before the @ sign out of trimmed email
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'contents' atom does not show any error if used with 'trailers'
atom and colon is missing before trailers arguments.
e.g %(contents:trailersonly) works, while it shouldn't.
It is definitely not an expected behavior.
Let's fix this bug.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, there are different tests for testing %(trailers) and
%(contents:trailers) causing redundant copy.
Its time to get rid of duplicate code.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
b6839fda68 (ref-filter: add support for %(contents:size), 2020-07-16)
added a new format for ref-filter, and added a function to generate
tests for this new feature in t6300. Unfortunately, it tries to run
`test_expect_sucess' instead of `test_expect_success', and writes
$expect to `expected', but tries to read `expect'. Those two issues
were probably unnoticed because the script only printed errors, but did
not crash. This fixes these issues.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's useful and efficient to be able to get the size of the
contents directly without having to pipe through `wc -c`.
Also the result of the following:
`git for-each-ref --format='%(contents)' refs/heads/my-branch | wc -c`
is off by one as `git for-each-ref` appends a newline character
after the contents, which can be seen by comparing its output
with the output from `git cat-file`.
As with %(contents), %(contents:size) is silently ignored, if a
ref points to something other than a commit or a tag:
```
$ git update-ref refs/mytrees/first HEAD^{tree}
$ git for-each-ref --format='%(contents)' refs/mytrees/first
$ git for-each-ref --format='%(contents:size)' refs/mytrees/first
```
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Adding tests for refs pointing to tree and blob shows that
we care about testing both positive ("see, my shiny new toy
does work") and negative ("and it won't do nonsensical
things when given an input it is not designed to work with")
cases.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git branch" and other "for-each-ref" variants accepted multiple
--sort=<key> options in the increasing order of precedence, but it
had a few breakages around "--ignore-case" handling, and tie-breaking
with the refname, which have been fixed.
* jk/for-each-ref-multi-key-sort-fix:
ref-filter: apply fallback refname sort only after all user sorts
ref-filter: apply --ignore-case to all sorting keys
|
|
Commit 9e468334b4 (ref-filter: fallback on alphabetical comparison,
2015-10-30) taught ref-filter's sort to fallback to comparing refnames.
But it did it at the wrong level, overriding the comparison result for a
single "--sort" key from the user, rather than after all sort keys have
been exhausted.
This worked correctly for a single "--sort" option, but not for multiple
ones. We'd break any ties in the first key with the refname and never
evaluate the second key at all.
To make matters even more interesting, we only applied this fallback
sometimes! For a field like "taggeremail" which requires a string
comparison, we'd truly return the result of strcmp(), even if it was 0.
But for numerical "value" fields like "taggerdate", we did apply the
fallback. And that's why our multiple-sort test missed this: it uses
taggeremail as the main comparison.
So let's start by adding a much more rigorous test. We'll have a set of
commits expressing every combination of two tagger emails, dates, and
refnames. Then we can confirm that our sort is applied with the correct
precedence, and we'll be hitting both the string and value comparators.
That does show the bug, and the fix is simple: moving the fallback to
the outer compare_refs() function, after all ref_sorting keys have been
exhausted.
Note that in the outer function we don't have an "ignore_case" flag, as
it's part of each individual ref_sorting element. It's debatable what
such a fallback should do, since we didn't use the user's keys to match.
But until now we have been trying to respect that flag, so the
least-invasive thing is to try to continue to do so. Since all callers
in the current code either set the flag for all keys or for none, we can
just pull the flag from the first key. In a hypothetical world where the
user really can flip the case-insensitivity of keys separately, we may
want to extend the code to distinguish that case from a blanket
"--ignore-case".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All of the ref-filter users (for-each-ref, branch, and tag) take an
--ignore-case option which makes filtering and sorting case-insensitive.
However, this option was applied only to the first element of the
ref_sorting list. So:
git for-each-ref --ignore-case --sort=refname
would do what you expect, but:
git for-each-ref --ignore-case --sort=refname --sort=taggername
would sort the primary key (taggername) case-insensitively, but sort the
refname case-sensitively. We have two options here:
- teach callers to set ignore_case on the whole list
- replace the ref_sorting list with a struct that contains both the
list of sorting keys, as well as options that apply to _all_
keys
I went with the first one here, as it gives more flexibility if we later
want to let the users set the flag per-key (presumably through some
special syntax when defining the key; for now it's all or nothing
through --ignore-case).
The new test covers this by sorting on both tagger and subject
case-insensitively, which should compare "a" and "A" identically, but
still sort them before "b" and "B". We'll break ties by sorting on the
refname to give ourselves a stable output (this is actually supposed to
be done automatically, but there's another bug which will be fixed in
the next commit).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One of the git for-each-ref tests asks to sort by object ID. However,
when sorted, the order of the refs differs between SHA-1 and SHA-256.
Sort the expected output so that the test passes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"for-each-ref" and friends that shows refs did not protect themselves
against ancient tags that did not record tagger names when asked to
show "%(taggername)", which have been corrected.
* mp/for-each-ref-missing-name-or-email:
ref-filter: initialize empty name or email fields
|
|
Formatting $(taggername) on headerless tags such as v0.99 in Git
causes a SIGABRT with error "munmap_chunk(): invalid pointer",
because of an oversight in commit f0062d3b74 (ref-filter: free
item->value and item->value->s, 2018-10-19).
Signed-off-by: Mischa POSLAWSKY <git@shiar.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since cfe004a5a9 (ref-filter: limit traversal to prefix, 2017-05-22),
the ref-filter code has sought to limit the traversals to a prefix of
the given patterns.
That code stopped short of handling more than one pattern, because it
means invoking 'for_each_ref_in' multiple times. If we're not careful
about which patterns overlap, we will output the same refs multiple
times.
For instance, consider the set of patterns 'refs/heads/a/*',
'refs/heads/a/b/c', and 'refs/tags/v1.0.0'. If we naïvely ran:
for_each_ref_in("refs/heads/a/*", ...);
for_each_ref_in("refs/heads/a/b/c", ...);
for_each_ref_in("refs/tags/v1.0.0", ...);
we would see 'refs/heads/a/b/c' (and everything underneath it) twice.
Instead, we want to partition the patterns into disjoint sets, where we
know that no ref will be matched by any two patterns in different sets.
In the above, these are:
- {'refs/heads/a/*', 'refs/heads/a/b/c'}, and
- {'refs/tags/v1.0.0'}
Given one of these disjoint sets, what is a suitable pattern to pass to
'for_each_ref_in'? One approach is to compute the longest common prefix
over all elements in that disjoint set, and let the caller cull out the
refs they didn't want. Computing the longest prefix means that in most
cases, we won't match too many things the caller would like to ignore.
The longest common prefixes of the above are:
- {'refs/heads/a/*', 'refs/heads/a/b/c'} -> refs/heads/a/*
- {'refs/tags/v1.0.0'} -> refs/tags/v1.0.0
We instead invoke:
for_each_ref_in("refs/heads/a/*", ...);
for_each_ref_in("refs/tags/v1.0.0", ...);
Which provides us with the refs we were looking for with a minimal
amount of extra cruft, but never a duplicate of the ref we asked for.
Implemented here is an algorithm which accomplishes the above, which
works as follows:
1. Lexicographically sort the given list of patterns.
2. Initialize 'prefix' to the empty string, where our goal is to
build each element in the above set of longest common prefixes.
3. Consider each pattern in the given set, and emit 'prefix' if it
reaches the end of a pattern, or touches a wildcard character. The
end of a string is treated as if it precedes a wildcard. (Note that
there is some room for future work to detect that, e.g., 'a?b' and
'abc' are disjoint).
4. Otherwise, recurse on step (3) with the slice of the list
corresponding to our current prefix (i.e., the subset of patterns
that have our prefix as a literal string prefix.)
This algorithm is 'O(kn + n log(n))', where 'k' is max(len(pattern)) for
each pattern in the list, and 'n' is len(patterns).
By discovering this set of interesting patterns, we reduce the runtime
of multi-pattern 'git for-each-ref' (and other ref traversals) from
O(N) to O(n log(N)), where 'N' is the total number of packed references.
Running 'git for-each-ref refs/tags/a refs/tags/b' on a repository with
10,000,000 refs in 'refs/tags/huge-N', my best-of-five times drop from:
real 0m5.805s
user 0m5.188s
sys 0m0.468s
to:
real 0m0.001s
user 0m0.000s
sys 0m0.000s
On linux.git, the times to dig out two of the latest -rc tags drops from
0.002s to 0.001s, so the change on repositories with fewer tags is much
less noticeable.
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In ref-filter.c, when processing the atom %(push:track), the
ahead/behind values are computed using `stat_tracking_info` which refers
to the upstream branch.
Fix that by introducing a new flag `for_push` in `stat_tracking_info`
in remote.c, which does the same thing but for the push branch.
Update the few callers of `stat_tracking_info` to handle this flag. This
ensure that whenever we use this function in the future, we are careful
to specify is this should apply to the upstream or the push branch.
This bug was not detected in t/t6300-for-each-ref.sh because in the test
for push:track, both the upstream and the push branches were behind by 1
from the local branch. Change the test so that the upstream branch is
behind by 1 while the push branch is ahead by 1. This allows us to test
that %(push:track) refers to the correct branch.
This changes the expected value of some following tests (by introducing
new references), so update them too.
Signed-off-by: Damien Robert <damien.olivier.robert+git@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test new formatting option deltabase.
Signed-off-by: Olga Telezhnaia <olyatelezhnaya@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test new formatting atom.
Signed-off-by: Olga Telezhnaia <olyatelezhnaya@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git interpret-trailers" and its underlying machinery had a buggy
code that attempted to ignore patch text after commit log message,
which triggered in various codepaths that will always get the log
message alone and never get such an input.
* jk/trailer-fixes:
append_signoff: use size_t for string offsets
sequencer: ignore "---" divider when parsing trailers
pretty, ref-filter: format %(trailers) with no_divider option
interpret-trailers: allow suppressing "---" divider
interpret-trailers: tighten check for "---" patch boundary
trailer: pass process_trailer_opts to trailer_info_get()
trailer: use size_t for iterating trailer list
trailer: use size_t for string offsets
|
|
In both of these cases we know that we are feeding the
trailer-parsing code a pure commit message. We should tell
it so, which avoids false positives for a commit message
that contains a "---" line.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change various tests that use an idiom of the form:
>expect &&
test_cmp expect actual
To instead use:
test_must_be_empty actual
The test_must_be_empty() wrapper was introduced in ca8d148daf ("test:
test_must_be_empty helper", 2013-06-09). Many of these tests have been
added after that time. This was mostly found with, and manually pruned
from:
git grep '^\s+>.*expect.* &&$' t
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "--ignore-case" option of "git for-each-ref" (and its friends)
did not work correctly, which has been fixed.
* jk/for-each-ref-icase:
ref-filter: avoid backend filtering with --ignore-case
for-each-ref: consistently pass WM_IGNORECASE flag
t6300: add a test for --ignore-case
|
|
When for-each-ref is used with --ignore-case, we expect
match_name_as_path() to do a case-insensitive match. But
there's an extra layer of filtering that happens before we
even get there. Since commit cfe004a5a9 (ref-filter: limit
traversal to prefix, 2017-05-22), we feed the prefix to the
ref backend so that it can optimize the ref iteration.
There's no mechanism for us to tell the backend we're matching
case-insensitively. Nor is there likely to be one anytime soon,
since the packed backend relies on binary-searching the sorted list
of refs. Let's just punt on this case. The extra filtering is an
optimization that we simply can't do. We'll still give the correct
answer via the filtering in match_name_as_path().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --ignore-case option was added by 3bb16a8bf2 (tag,
branch, for-each-ref: add --ignore-case for sorting and
filtering, 2016-12-04), but it was never tested. And indeed,
it does not work due to multiple bugs (which will be fixed
in subsequent patches).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
