Age | Commit message (Collapse) | Author |
|
Reorders t/test-lib.sh so that we dot-source GIT-BUILD-OPTIONS that
records the shell and Perl the user told us to use with Git a lot
early, so that test-lib.sh script itself can use "$PERL_PATH" in
one of its early operations.
* jc/test-lib-source-build-options-early:
test-lib: reorder and include GIT-BUILD-OPTIONS a lot earlier
|
|
Finishing touches to the XDG support (new feature for 1.7.12) and
tests.
* mm/config-xdg:
t1306: check that XDG_CONFIG_HOME works
ignore: make sure we have an xdg path before using it
attr: make sure we have an xdg path before using it
test-lib.sh: unset XDG_CONFIG_HOME
|
|
Now that git respects XDG_CONFIG_HOME for some lookups, we
must be sure to cleanse the test environment. Otherwise, the
user's XDG_CONFIG_HOME could influence the test results.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This dot-sources GIT-BUILD-OPTIONS a lot earlier in test-lib.sh so
that its use of "perl" can use "$PERL_PATH" to choose the version of
Perl the user told us is suitable for our use.
This is iffy; I didn't check it very carefully, and I would not be
surprised if there are subtle breakages.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Most notably, t4031 creates a small shell script that invokes perl
and we want to use "$PERL_PATH" to name the version of Perl suitable
for our use, read from GIT-BUILD-OPTS. The test would fail when it
is directly run in t/ directory from the shell or "make" is run in t/
directory.
This problem was hidden from "make test" run in the top-level
directory, because its Makefile exports PERL_PATH.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A broken shell may not let us set an environment value to an arbitrary
value, interfering with some of the tests. Introduce a test prerequisite
so that we can skip some tests on such a platform.
By Zbigniew Jędrzejewski-Szmek
* zj/mksh-columns-breakage:
test-lib: skip test with COLUMNS=1 under mksh
|
|
mksh does not allow $COLUMNS to be set below 12. mksh(1) says that
$COLUMNS is "always set, defaults to 80, unless the value as reported
by stty(1) is non-zero and sane enough". This applies also to setting
it directly for one command:
$ COLUMNS=10 python -c 'import os; print os.environ["COLUMNS"]'
98
Add a test prerequisite by checking if we can set COLUMNS=1, to allow
us to skip tests that needs it.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
$COLUMNS must be unset to not interfere with the tests. The tests
already ignore the terminal size because output is redirected to a
file, but COLUMNS overrides terminal size detection and changes the
test output away from the standard 80.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Update draft release notes to 1.7.9.3 for the last time
http.proxy: also mention https_proxy and all_proxy
t0300: work around bug in dash 0.5.6
t5512 (ls-remote): modernize style
tests: fix spurious error when run directly with Solaris /usr/xpg4/bin/sh
|
|
If any test script is run directly with Solaris 10 /usr/xpg4/bin/sh or
/bin/ksh, it fails spuriously with a message like:
t0000-basic.sh[31]: unset: bad argument count
This happens because those shells bail out when encountering a call to
"unset" with no arguments, and such unset call could take place in
'test-lib.sh'. Fix that issue, and add a proper comment to ensure we
don't regress in this respect.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This introduces a performance testing framework under t/perf/. It
tries to be as close to the test-lib.sh infrastructure as possible,
and thus should be easy to get used to for git developers.
The following points were considered for the implementation:
1. You usually want to compare arbitrary revisions/build trees against
each other. They may not have the performance test under
consideration, or even the perf-lib.sh infrastructure.
To cope with this, the 'run' script lets you specify arbitrary
build dirs and revisions. It even automatically builds the revisions
if it doesn't have them at hand yet.
2. Usually you would not want to run all tests. It would take too
long anyway. The 'run' script lets you specify which tests to run;
or you can also do it manually. There is a Makefile for
discoverability and 'make clean', but it is not meant for
real-world use.
3. Creating test repos from scratch in every test is extremely
time-consuming, and shipping or downloading such large/weird repos
is out of the question.
We leave this decision to the user. Two different sizes of test
repos can be configured, and the scripts just copy one or more of
those (using hardlinks for the object store). By default it tries
to use the build tree's git.git repository.
This is fairly fast and versatile. Using a copy instead of a clone
preserves many properties that the user may want to test for, such
as lots of loose objects, unpacked refs, etc.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This just moves all the user-facing functions to a separate file and
sources that instead.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/tests-write-script:
t0300: use write_script helper
tests: add write_script helper function
|
|
Many of the scripts in the test suite write small helper
shell scripts to disk. It's best if these shell scripts
start with "#!$SHELL_PATH" rather than "#!/bin/sh", because
/bin/sh on some platforms is too buggy to be used.
However, it can be cumbersome to expand $SHELL_PATH, because
the usual recipe for writing a script is:
cat >foo.sh <<-\EOF
#!/bin/sh
echo my arguments are "$@"
EOF
To expand $SHELL_PATH, you have to either interpolate the
here-doc (which would require quoting "\$@"), or split the
creation into two commands (interpolating the $SHELL_PATH
line, but not the rest of the script). Let's provide a
helper function that makes that less syntactically painful.
While we're at it, this helper can also take care of the
"chmod +x" that typically comes after the creation of such a
script, saving the caller a line.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/pull-signed-tag:
merge: use editor by default in interactive sessions
Conflicts:
Documentation/merge-options.txt
|
|
Traditionally, a cleanly resolved merge was committed by "git merge" using
the auto-generated merge commit log message without invoking the editor.
After 5 years of use in the field, it turns out that people perform too
many unjustified merges of the upstream history into their topic branches.
These merges are not just useless, but they are often not explained well,
and making the end result unreadable when it gets time for merging their
history back to their upstream.
Earlier we added the "--edit" option to the command, so that people can
edit the log message to explain and justify their merge commits. Let's
take it one step further and spawn the editor by default when we are in an
interactive session (i.e. the standard input and the standard output are
pointing at the same tty device).
There may be existing scripts that leave the standard input and the
standard output of the "git merge" connected to whatever environment the
scripts were started, and such invocation might trigger the above
"interactive session" heuristics. GIT_MERGE_AUTOEDIT environment variable
can be set to "no" at the beginning of such scripts to use the historical
behaviour while the script runs.
Note that this backward compatibility is meant only for scripts, and we
deliberately do *not* support "merge.edit = yes/no/auto" configuration
option to allow people to keep the historical behaviour.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 781f76b15 (test-lib: redirect stdin of tests) you can't simply put a
"bash &&" into a test for debugging purposes anymore. Instead you'll have
to use "bash <&6 >&3 2>&4".
As that invocation is not that easy to remember add the test_pause
convenience function. It invokes "$SHELL_PATH" to provide a sane shell
for the user.
This function also checks if the -v flag is given and will error out if
that is not the case instead of letting the test hang until ^D is pressed.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/maint-do-not-feed-stdin-to-tests:
test-lib: redirect stdin of tests
|
|
* ab/enable-i18n:
i18n: add infrastructure for translating Git with gettext
Conflicts:
Makefile
|
|
We want to run tests in a predictable, sterile environment
so we can get repeatable results. They should take as
little input as possible from the environment outside the
test script. We already sanitize environment variables, but
leave stdin untouched. This means that scripts can
accidentally be impacted by content on stdin, or whether
stdin isatty().
Furthermore, scripts reading from stdin can be annoying to
outer loops which care about their stdin offset, like:
while read sha1; do
make test
done
A test which accidentally reads stdin would soak up all of
the rest of the input intended for the outer shell loop.
Let's redirect stdin from /dev/null, which solves both
of these problems. It won't detect tests accidentally
reading from stdin, but since doing so now gives a
deterministic result, we don't need to consider that an
error.
We'll also leave file descriptor 6 as a link to the original
stdin. Tests shouldn't need to look at this, but it can be
convenient for inserting interactive commands while
debugging tests (e.g., you could insert "bash <&6 >&3 2>&4"
to run interactive commands in the environment of the test
script).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The point of test_config is to simultaneously set a config
variable and register its cleanup handler, like:
test_config core.foo bar
However, it stupidly assumes that $1 contained the name of
the variable, which means it won't work for:
test_config --global core.foo bar
We could try to parse the command-line ourselves and figure
out which parts need to be fed to test_unconfig. But since
this is likely the most common variant, it's much simpler
and less error-prone to simply add a new function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the skeleton implementation of i18n in Git to one that can show
localized strings to users for our C, Shell and Perl programs using
either GNU libintl or the Solaris gettext implementation.
This new internationalization support is enabled by default. If
gettext isn't available, or if Git is compiled with
NO_GETTEXT=YesPlease, Git falls back on its current behavior of
showing interface messages in English. When using the autoconf script
we'll auto-detect if the gettext libraries are installed and act
appropriately.
This change is somewhat large because as well as adding a C, Shell and
Perl i18n interface we're adding a lot of tests for them, and for
those tests to work we need a skeleton PO file to actually test
translations. A minimal Icelandic translation is included for this
purpose. Icelandic includes multi-byte characters which makes it easy
to test various edge cases, and it's a language I happen to
understand.
The rest of the commit message goes into detail about various
sub-parts of this commit.
= Installation
Gettext .mo files will be installed and looked for in the standard
$(prefix)/share/locale path. GIT_TEXTDOMAINDIR can also be set to
override that, but that's only intended to be used to test Git itself.
= Perl
Perl code that's to be localized should use the new Git::I18n
module. It imports a __ function into the caller's package by default.
Instead of using the high level Locale::TextDomain interface I've
opted to use the low-level (equivalent to the C interface)
Locale::Messages module, which Locale::TextDomain itself uses.
Locale::TextDomain does a lot of redundant work we don't need, and
some of it would potentially introduce bugs. It tries to set the
$TEXTDOMAIN based on package of the caller, and has its own
hardcoded paths where it'll search for messages.
I found it easier just to completely avoid it rather than try to
circumvent its behavior. In any case, this is an issue wholly
internal Git::I18N. Its guts can be changed later if that's deemed
necessary.
See <AANLkTilYD_NyIZMyj9dHtVk-ylVBfvyxpCC7982LWnVd@mail.gmail.com> for
a further elaboration on this topic.
= Shell
Shell code that's to be localized should use the git-sh-i18n
library. It's basically just a wrapper for the system's gettext.sh.
If gettext.sh isn't available we'll fall back on gettext(1) if it's
available. The latter is available without the former on Solaris,
which has its own non-GNU gettext implementation. We also need to
emulate eval_gettext() there.
If neither are present we'll use a dumb printf(1) fall-through
wrapper.
= About libcharset.h and langinfo.h
We use libcharset to query the character set of the current locale if
it's available. I.e. we'll use it instead of nl_langinfo if
HAVE_LIBCHARSET_H is set.
The GNU gettext manual recommends using langinfo.h's
nl_langinfo(CODESET) to acquire the current character set, but on
systems that have libcharset.h's locale_charset() using the latter is
either saner, or the only option on those systems.
GNU and Solaris have a nl_langinfo(CODESET), FreeBSD can use either,
but MinGW and some others need to use libcharset.h's locale_charset()
instead.
=Credits
This patch is based on work by Jeff Epler <jepler@unpythonic.net> who
did the initial Makefile / C work, and a lot of comments from the Git
mailing list, including Jonathan Nieder, Jakub Narebski, Johannes
Sixt, Erik Faye-Lund, Peter Krefting, Junio C Hamano, Thomas Rast and
others.
[jc: squashed a small Makefile fix from Ramsay]
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* tr/mergetool-valgrind:
Symlink mergetools scriptlets into valgrind wrappers
|
|
Since bc7a96a (mergetool--lib: Refactor tools into separate files,
2011-08-18) the mergetools and difftools related tests fail under
--valgrind because the mergetools/* scriptlets are not in the exec
path.
For now, symlink the mergetools subdir into the t/valgrind/bin
directory as a whole, since it does not contain anything of interest
to the valgrind wrappers.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/color-and-pager:
want_color: automatically fallback to color.ui
diff: don't load color config in plumbing
config: refactor get_colorbool function
color: delay auto-color decision until point of use
git_config_colorbool: refactor stdout_is_tty handling
diff: refactor COLOR_DIFF from a flag into an int
setup_pager: set GIT_PAGER_IN_USE
t7006: use test_config helpers
test-lib: add helper functions for config
t7006: modernize calls to unset
Conflicts:
builtin/commit.c
parse-options.c
|
|
* rt/zlib-smaller-window:
test: consolidate definition of $LF
Tolerate zlib deflation with window size < 32Kb
|
|
There are a few common tasks when working with configuration
variables in tests; this patch aims to make them a little
easier to write and less error-prone.
When setting a variable, you should typically make sure to
clean it up after the test is finished, so as not to pollute
other tests. Like:
test_when_finished 'git config --unset foo.bar' &&
git config foo.bar baz
This patch lets you just write:
test_config foo.bar baz
When clearing a variable that does not exist, git-config
will report a specific non-zero error code. Meaning that
tests which call "git config --unset" often either rely on
the prior tests having actually set it, or must use
test_might_fail. With this patch, the previous:
test_might_fail git config --unset foo.bar
becomes:
test_unconfig foo.bar
Not only is this easier to type, but it is more robust; it
will correctly detect errors from git-config besides "key
was not set".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As we seem to need this variable that holds a single LF character
in many places, define it in test-lib.sh and let the test scripts
use it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In olden times, tests would quietly exit the script when they failed
at an inconvenient moment, which was a little disconcerting.
Therefore v0.99.5~24^2~4 (Trapping exit in tests, using return for
errors, 2005-08-10) switched to an idiom of using "return" instead,
wrapping evaluation of test code in a function to make that safe:
test_run_ () {
eval >&3 2>&4 "$1"
eval_ret="$?"
return 0
}
Years later, the implementation of test_when_finished (v1.7.1.1~95,
2010-05-02) and v1.7.2-rc2~1^2~13 (test-lib: output a newline before
"ok" under a TAP harness, 2010-06-24) took advantage of test_run_ as a
place to put code shared by all test assertion functions, without
paying attention to the function's former purpose:
test_run_ () {
...
eval >&3 2>&4 "$1"
eval_ret=$?
if should run cleanup
then
eval >&3 2>&4 "$test_cleanup"
fi
if TAP format requires a newline here
then
echo
fi
return 0
}
That means cleanup commands and the newline to put TAP output at
column 0 are skipped when tests use "return" to fail early. Fix it by
introducing a test_eval_ function to catch the "return", with a
comment explaining the new function's purpose for the next person who
might touch this code.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As v0.99.5~24^2~4 (Trapping exit in tests, using return for errors,
2005-08-10) explains, callers to test_run_ (such as test_expect_code)
used to check the result from eval and the return value separately so
tests that fail early could be distinguished from tests that completed
normally with successful (nonzero) status. Eventually tests that
succeed with nonzero status were phased out (see v1.7.4-rc0~65^2~19,
2010-10-03 and especially v1.5.5-rc0~271, 2008-02-01) but the weird
two-return-value calling convention lives on.
Let's get rid of it. The new rule: test_run_ succeeds (returns 0)
if and only if the test succeeded.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-1.7.5:
test: skip clean-up when running under --immediate mode
"branch -d" can remove more than one branches
|
|
Some tests try to be too careful about cleaning themselves up and
do
test_expect_success description '
set-up some test refs and/or configuration &&
test_when_finished "revert the above changes" &&
the real test
'
Which is nice to make sure that a potential failure would not have
unexpected interaction with the next test. This however interferes when
"the real test" fails and we want to see what is going on, by running the
test with --immediate mode and descending into its trash directory after
the test stops. The precondition to run the real test and cause it to fail
is all gone after the clean-up procedure defined by test_when_finished is
done.
Update test_run_ which is the workhorse of running a test script
called from test_expect_success and test_expect_failure, so that we do not
run clean-up script defined with test_when_finished when a test that is
expected to succeed fails under the --immediate mode.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Jeff King <peff@peff.net>
|
|
When we run tests under valgrind, we symlink anything
executable that starts with git-* or test-* into a special
valgrind bin directory, and then make that our
GIT_EXEC_PATH.
However, shell libraries like git-sh-setup do not have the
executable bit marked, and did not get symlinked. This
means that any test looking for shell libraries in our
exec-path would fail to find them, even though that is a
fine thing to do when testing against a regular git build
(or in a git install, for that matter).
t2300 demonstrated this problem. The fix is to symlink these
shell libraries directly into the valgrind directory.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ab/i18n-fixup: (24 commits)
i18n: use test_i18n{cmp,grep} in t7600, t7607, t7611 and t7811
i18n: use test_i18n{grep,cmp} in t7508
i18n: use test_i18ngrep in t7506
i18n: use test_i18ngrep and test_i18ncmp in t7502
i18n: use test_i18ngrep in t7501
i18n: use test_i18ncmp in t7500
i18n: use test_i18ngrep in t7201
i18n: use test_i18ncmp and test_i18ngrep in t7102 and t7110
i18n: use test_i18ncmp and test_i18ngrep in t5541, t6040, t6120, t7004, t7012 and t7060
i18n: use test_i18ncmp and test_i18ngrep in t3700, t4001 and t4014
i18n: use test_i18ncmp and test_i18ngrep in t3203, t3501 and t3507
i18n: use test_i18ngrep in t2020, t2204, t3030, and t3200
i18n: use test_i18ngrep in lib-httpd and t2019
i18n: do not overuse C_LOCALE_OUTPUT (grep)
i18n: use test_i18ncmp in t1200 and t2200
i18n: .git file is not a human readable message (t5601)
i18n: do not overuse C_LOCALE_OUTPUT
i18n: mark init-db messages for translation
i18n: mark checkout plural warning for translation
i18n: mark checkout --detach messages for translation
...
|
|
* mk/grep-pcre:
git-grep: Fix problems with recently added tests
git-grep: Update tests (mainly for -P)
Makefile: Pass USE_LIBPCRE down in GIT-BUILD-OPTIONS
git-grep: update tests now regexp type is "last one wins"
git-grep: do not die upon -F/-P when grep.extendedRegexp is set.
git-grep: Bail out when -P is used with -F or -E
grep: Add basic tests
configure: Check for libpcre
git-grep: Learn PCRE
grep: Extract compile_regexp_failed() from compile_regexp()
grep: Fix a typo in a comment
grep: Put calls to fixmatch() and regmatch() into patmatch()
contrib/completion: --line-number to git grep
Documentation: Add --line-number to git-grep synopsis
|
|
* jn/userdiff-perl-updates:
userdiff/perl: tighten BEGIN/END block pattern to reject here-doc delimiters
tests: make test_expect_code quieter on success
userdiff/perl: catch sub with brace on second line
userdiff/perl: match full line of POD headers
userdiff/perl: anchor "sub" and "package" patterns on the left
t4018 (funcname patterns): minor cleanups
t4018 (funcname patterns): make configuration easier to track
t4018 (funcname patterns): make .gitattributes state easier to track
|
|
A command exiting with the expected status is not particularly
notable.
While the indication of progress might be useful when tracking down
where in a test a failure has happened, the same applies to most other
test helpers, which are quiet about success, so this single helper's
output stands out in an unpleasant way. An alternative method for
showing progress information might to invent a --progress option that
runs tests with "set -x", or until that is available, to run tests
using commands like
prove -v -j2 --shuffle --exec='sh -x' t2202-add-addremove.sh
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/fix-diff-files-unmerged:
diff-files: show unmerged entries correctly
diff: remove often unused parameters from diff_unmerge()
diff.c: return filepair from diff_unmerge()
test: use $_z40 from test-lib
|
|
This modest patch adds simple tests for git grep -P/--perl-regexp and
its interoperation with -i and -w.
Tests are only enabled when prerequisite LIBPCRE is defined (it's
automatically set based on USE_LIBPCRE in test-lib.sh).
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/fix-diff-files-unmerged:
diff-files: show unmerged entries correctly
diff: remove often unused parameters from diff_unmerge()
diff.c: return filepair from diff_unmerge()
test: use $_z40 from test-lib
|
|
* ab/i18n-fixup: (24 commits)
i18n: use test_i18n{cmp,grep} in t7600, t7607, t7611 and t7811
i18n: use test_i18n{grep,cmp} in t7508
i18n: use test_i18ngrep in t7506
i18n: use test_i18ngrep and test_i18ncmp in t7502
i18n: use test_i18ngrep in t7501
i18n: use test_i18ncmp in t7500
i18n: use test_i18ngrep in t7201
i18n: use test_i18ncmp and test_i18ngrep in t7102 and t7110
i18n: use test_i18ncmp and test_i18ngrep in t5541, t6040, t6120, t7004, t7012 and t7060
i18n: use test_i18ncmp and test_i18ngrep in t3700, t4001 and t4014
i18n: use test_i18ncmp and test_i18ngrep in t3203, t3501 and t3507
i18n: use test_i18ngrep in t2020, t2204, t3030, and t3200
i18n: use test_i18ngrep in lib-httpd and t2019
i18n: do not overuse C_LOCALE_OUTPUT (grep)
i18n: use test_i18ncmp in t1200 and t2200
i18n: .git file is not a human readable message (t5601)
i18n: do not overuse C_LOCALE_OUTPUT
i18n: mark init-db messages for translation
i18n: mark checkout plural warning for translation
i18n: mark checkout --detach messages for translation
...
|
|
Apply parameter expansion. Also use here document to save
test results instead of appending each line with ">>".
Signed-off-by: Mathias Lafeldt <misfire@debugon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is no need to duplicate the definition of $_z40 and $_x40 that
test-lib.sh supplies the test scripts.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of skipping the whole test, introduce test_i18ngrep wrapper that
pretends a successful result under GETTEXT_POISON build.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is too coarse-grained way that led to artificial splitting of a
logically single test case into "do" and "check only without poison".
As the majority of check is done by comparing expected and actual output
stored in a file with test_cmp anyway, just introduce test_i18ncmp that
pretends the actual output matched the expected one when gettext-poison
is in effect.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
HOME must be set before calling git-init when creating test repositories
|
|
Otherwise the created test repositories will be affected by users ~/.gitconfig.
For example, setting core.logAllrefupdates in users config will make all
calls to "git config --unset core.logAllrefupdates" fail which will break
the first test which uses the statement and expects it to succeed.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In commit 95a1d12e9b9f ("tests: scrub environment of GIT_* variables") all
environment variables starting with "GIT_" were unset for the tests using
a perl script rather than unsetting them one by one. Only three exceptions
were made to make them work as before: "GIT_TRACE*", "GIT_DEBUG*" and
"GIT_USE_LOOKUP".
Unfortunately some environment variables used by the test framework itself
were not added to the exceptions and thus stopped working when given
before the make command instead of after it. Those are:
- GIT_NOTES_TIMING_TESTS
- GIT_PATCHID_TIMING_TESTS
- GIT_PROVE_OPTS
- GIT_REMOTE_SVN_TEST_BIG_FILES
- GIT_SKIP_TESTS
- GIT_TEST*
- GIT_VALGRIND_OPTIONS
I noticed that when skipping a test the way I was used to suddenly failed:
GIT_SKIP_TESTS='t1234' GIT_TEST_OPTS='--root=/dev/shm' make -j10 test
This should work according to t/README, but didn't anymore, so let's fix
that by adding them to the exception list. And to avoid having a long
regexp put the exceptions in a separate variable using nicer formatting.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jn/test-sanitize-git-env:
tests: scrub environment of GIT_* variables
config: drop support for GIT_CONFIG_NOGLOBAL
gitattributes: drop support for GIT_ATTR_NOGLOBAL
tests: suppress system gitattributes
tests: stop worrying about obsolete environment variables
|
|
Variables from the inherited environment that are meaningful to git
can break tests in undesirable ways. For example,
GIT_PAGER=more sh t5400-send-pack.sh -v -i
hangs. So unset all environment variables in the GIT_ namespace in
test-lib, with a few exceptions:
- GIT_TRACE* are useful for tracking down bugs exhibited by a failing
test;
- GIT_DEBUG* are GIT_TRACE variables by another name, practically
speaking. They should probably be tweaked to follow the
GIT_TRACE_foo scheme and use trace_printf machinery some time.
- GIT_USE_LOOKUP from v1.5.6-rc0~134^2~1 (sha1-lookup: more memory
efficient search in sorted list of SHA-1, 2007-12-29) is about
trying an alternate implementation strategy rather than changing
semantics and it can be useful to compare performance with and
without it set.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|