Age | Commit message (Collapse) | Author |
|
The test_must_fail function in test-lib.sh has been designed to
distinguish segmentation faults from controlled errors. But in the
current implementation this only works if a git command does not return a
small negative value, like -1, -2 or -3. But some git commands do.
Because any signal (like SIGSEGV) will result in an exit status
less than 193, this patch just adds a further check for the exit
status.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* dr/ceiling:
Eliminate an unnecessary chdir("..")
Add support for GIT_CEILING_DIRECTORIES
Fold test-absolute-path into test-path-utils
Implement normalize_absolute_path
Conflicts:
cache.h
setup.c
|
|
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sr/tests:
Hook up the result aggregation in the test makefile.
A simple script to parse the results from the testcases
Modify test-lib.sh to output stats to t/test-results/*
Conflicts:
t/test-lib.sh
|
|
* lw/perlish:
Git.pm: add test suite
t/test-lib.sh: add test_external and test_external_without_stderr
|
|
This is for running external test scripts in other programming
languages that provide continuous output about their tests. Using
test_expect_success (like "test_expect_success 'description' 'perl
test-script.pl'") doesn't suffice here because test_expect_success
eats stdout in non-verbose mode, which is not fixable without major
file descriptor trickery.
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a --long-tests option to test-lib.sh, which enables tests to
selectively run more exhaustive (longer running, potentially
brute-force) tests. Such exhaustive tests would only be useful if one
works on the specific module that is being tested -- for a general "cd
t/; make" to check whether everything is OK, such exhaustive tests
shouldn't be run by default since the longer it takes to run the
tests, the less often they are actually run.
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
...also in comments.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Only ignore whitespace errors in t/tNNNN-*.sh and the t/tNNNN
subdirectories. Other files (like test libraries) should still be
checked.
Also fix a whitespace error in t/test-lib.sh.
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This change is needed order to aggregate data on the test run later on.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Without this, some tests will fail because they compare command output
of subprocesses (such as git) with $PWD -- but subprocesses have the
physical path as their working directory, whereas $PWD contains the
symlinked path. This fixes it.
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make git recognize a new environment variable that prevents it from
chdir'ing up into specified directories when looking for a GIT_DIR.
Useful for avoiding slow network directories.
For example, I use git in an environment where homedirs are automounted
and "ls /home/nonexistent" takes about 9 seconds. Setting
GIT_CEILING_DIRS="/home" allows "git help -a" (for bash completion) and
"git symbolic-ref" (for my shell prompt) to run in a reasonable time.
Signed-off-by: David Reiss <dreiss@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Exit with error if cd into the "trash directory" failed (error
already reported, so just exit).
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to help prevent regressions in the future, rename the trash directory
for all tests to contain spaces. This patch also corrects two failures that
were caused or exposed by this change.
Signed-off-by: Bryan Donlan <bdonlan@fushizen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Bryan Donlan <bdonlan@fushizen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In particular, this function correctly handles cases where the pwd contains
spaces, quotes, and other troublesome metacharacters.
Signed-off-by: Bryan Donlan <bdonlan@fushizen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a git command is run under test_must_fail to make sure that
the argument parser catches bogus command line, it exits with 129.
We need to catch it as a valid "graceful error exit".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When your test creates an unwritable directory that test framework cannot
clean out by "rm -fr trash", later tests cannot start in a fresh state
they expect to. Detect this and error out early.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many scripts compare actual and expected output using
"diff -u". This is nicer than "cmp" because the output shows
how the two differ. However, not all versions of diff
understand -u, leading to unnecessary test failure.
This adds a test_cmp function to the test scripts and
switches all "diff -u" invocations to use it. The function
uses the contents of "$GIT_TEST_CMP" to compare its
arguments; the default is "diff -u".
On systems with a less-capable diff, you can do:
GIT_TEST_CMP=cmp make test
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
unquote_c_style: fix off-by-one.
test-lib: fix TERM to dumb for test repeatability
config.txt: refer to --upload-pack and --receive-pack instead of --exec
git-gui: Gracefully fall back to po2msg.sh if msgfmt --tcl fails
|
|
Dscho noticed that Term::ReadLine (used by send-email) colorized its
output for his TERM settings, inside t9001 tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we expect a git command to notice and signal errors, we
carelessly wrote in our tests:
test_expect_success 'reject bogus request' '
do something &&
do something else &&
! git command
'
but a non-zero exit could come from the "git command" segfaulting.
A new helper function "tset_must_fail" is introduced and it is
meant to be used to make sure the command gracefully fails (iow,
dying and exiting with non zero status is counted as a failure
to "gracefully fail"). The above example should be written as:
test_expect_success 'reject bogus request' '
do something &&
do something else &&
test_must_fail git command
'
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cb/http-test:
http-push: add regression tests
http-push: push <remote> :<branch> deletes remote branch
|
|
The top-level Makefile now creates a GIT-BUILD-OPTIONS file
which stores any options selected by the make process that
may be of use to further parts of the build process.
Specifically, we store the SHELL_PATH so that it can be used
by tests to construct shell scripts on the fly.
The format of the GIT-BUILD-OPTIONS file is Bourne shell,
and it is sourced by test-lib.sh; all tests can rely on just
having $SHELL_PATH correctly set in the environment.
The GIT-BUILD-OPTIONS file is written every time the
toplevel 'make' is invoked. Since the only users right now
are the test scripts, there's no drawback to updating its
timestamp. If something build-related depends on this, we
can do a trick similar to the one used by GIT-CFLAGS.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we expect a git command to notice and signal errors, we
carelessly wrote in our tests:
test_expect_success 'reject bogus request' '
do something &&
do something else &&
! git command
'
but a non-zero exit could come from the "git command" segfaulting.
A new helper function "tset_must_fail" is introduced and it is
meant to be used to make sure the command gracefully fails (iow,
dying and exiting with non zero status is counted as a failure
to "gracefully fail"). The above example should be written as:
test_expect_success 'reject bogus request' '
do something &&
do something else &&
test_must_fail git command
'
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
http-push tests require a web server with WebDAV support.
This commit introduces a HTTPD test library, which can be configured using
the following environment variables.
GIT_TEST_HTTPD enable HTTPD tests
LIB_HTTPD_PATH web server path
LIB_HTTPD_MODULE_PATH web server modules path
LIB_HTTPD_PORT listening port
LIB_HTTPD_DAV enable DAV
LIB_HTTPD_SVN enable SVN
LIB_HTTPD_SSL enable SSL
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, we set the GIT_CONFIG environment variable in
our tests so that only that file was read. However, setting
it to a static value is not correct, since we are not
necessarily always in the same directory; instead, we want
the usual git config file lookup to happen.
To do this, we stop setting GIT_CONFIG, which means that we
must now suppress the reading of the system-wide and user
configs.
This exposes an incorrect test in t1500, which is also
fixed (the incorrect test worked because we were failing to
read the core.bare value from the config file, since the
GIT_CONFIG variable was pointing us to the wrong file).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we have known breakages, we still said "passed all N
test(s)", which was a bit funny.
This rewords it to read "passed all remaining N test(s)" in such
a case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Originally, test_expect_failure was designed to be the opposite
of test_expect_success, but this was a bad decision. Most tests
run a series of commands that leads to the single command that
needs to be tested, like this:
test_expect_{success,failure} 'test title' '
setup1 &&
setup2 &&
setup3 &&
what is to be tested
'
And expecting a failure exit from the whole sequence misses the
point of writing tests. Your setup$N that are supposed to
succeed may have failed without even reaching what you are
trying to test. The only valid use of test_expect_failure is to
check a trivial single command that is expected to fail, which
is a minority in tests of Porcelain-ish commands.
This large-ish patch rewrites all uses of test_expect_failure to
use test_expect_success and rewrites the condition of what is
tested, like this:
test_expect_success 'test title' '
setup1 &&
setup2 &&
setup3 &&
! this command should fail
'
test_expect_failure is redefined to serve as a reminder that
that test *should* succeed but due to a known breakage in git it
currently does not pass. So if git-foo command should create a
file 'bar' but you discovered a bug that it doesn't, you can
write a test like this:
test_expect_failure 'git-foo should create bar' '
rm -f bar &&
git foo &&
test -f bar
'
This construct acts similar to test_expect_success, but instead
of reporting "ok/FAIL" like test_expect_success does, the
outcome is reported as "FIXED/still broken".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch removes a spurious "command not found" error
and actually makes the "Test script did not set test_description."
string follow the command line option "--no-color".
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
like when the output is redirected into a file in a cron job.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This shuts down the "* ok ##: `test description`" messages.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ei/worktree+filter:
filter-branch: always export GIT_DIR if it is set
setup_git_directory: fix segfault if repository is found in cwd
test GIT_WORK_TREE
extend rev-parse test for --is-inside-work-tree
Use new semantics of is_bare/inside_git_dir/inside_work_tree
introduce GIT_WORK_TREE to specify the work tree
test git rev-parse
rev-parse: introduce --is-bare-repository
rev-parse: document --is-inside-git-dir
|
|
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
setup_gdg is used as abbreviation for setup_git_directory_gently.
The work tree can be specified using the environment variable
GIT_WORK_TREE and the config option core.worktree (the environment
variable has precendence over the config option). Additionally
there is a command line option --work-tree which sets the
environment variable.
setup_gdg does the following now:
GIT_DIR unspecified
repository in .git directory
parent directory of the .git directory is used as work tree,
GIT_WORK_TREE is ignored
GIT_DIR unspecified
repository in cwd
GIT_DIR is set to cwd
see the cases with GIT_DIR specified what happens next and
also see the note below
GIT_DIR specified
GIT_WORK_TREE/core.worktree unspecified
cwd is used as work tree
GIT_DIR specified
GIT_WORK_TREE/core.worktree specified
the specified work tree is used
Note on the case where GIT_DIR is unspecified and repository is in cwd:
GIT_WORK_TREE is used but is_inside_git_dir is always true.
I did it this way because setup_gdg might be called multiple
times (e.g. when doing alias expansion) and in successive calls
setup_gdg should do the same thing every time.
Meaning of is_bare/is_inside_work_tree/is_inside_git_dir:
(1) is_bare_repository
A repository is bare if core.bare is true or core.bare is
unspecified and the name suggests it is bare (directory not
named .git). The bare option disables a few protective
checks which are useful with a working tree. Currently
this changes if a repository is bare:
updates of HEAD are allowed
git gc packs the refs
the reflog is disabled by default
(2) is_inside_work_tree
True if the cwd is inside the associated working tree (if there
is one), false otherwise.
(3) is_inside_git_dir
True if the cwd is inside the git directory, false otherwise.
Before this patch is_inside_git_dir was always true for bare
repositories.
When setup_gdg finds a repository git_config(git_default_config) is
always called. This ensure that is_bare_repository makes use of
core.bare and does not guess even though core.bare is specified.
inside_work_tree and inside_git_dir are set if setup_gdg finds a
repository. The is_inside_work_tree and is_inside_git_dir functions
will die if they are called before a successful call to setup_gdg.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some other programs get the user's email address from $EMAIL, so fall back to
that if we don't have a Git-specific email address.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
that exports CDPATH to the environment
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Make every test executable. Remove exec-attribute from included shell files,
they can't used standalone anyway.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
test-lib:
Make sure test-chmtime has been built before starting.
t4200-rerere:
Removed non-portable date dependency and avoid touch
Avoid "test -a" which isn't portable, either
lib-git-svn:
Use test-chmtime instead of Perl one-liner to poke
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This was done by setting $HOME to somewhere bogus. A better method is
to reuse $GIT_CONFIG, which was invented for ignoring the global
config file explicitely.
Technically, setting GIT_CONFIG=.git/config could be wrong, but it
passes all the tests, and we can keep the tests that way.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Its really nice to be able to run a test with -v and automatically
see the "debugging" dump from merge-recursive, especially if we
are actually trying to debug merge-recursive.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
While 'init-db' still is and probably will always remain a valid git
command for obvious backward compatibility reasons, it would be a good
idea to move shipped tools and docs to using 'init' instead.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The earlier test timestamp was too old; I forgot that the bare
unixtime integer had to be after Jan 1, 2000. This changes
test_tick to use the git-epoch timestamp.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Not that this reveals anything new, but I did test_tick shell
function in test-lib and found it rather cute and nice.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
In some environments, certain tests have no way of succeeding
due to platform limitation, such as lack of 'unzip' program, or
filesystem that do not allow arbitrary sequence of non-NUL bytes
as pathnames.
You should be able to say something like
$ cd t
$ GIT_SKIP_TESTS=t9200.8 t9200-git-cvsexport-commit.sh
and even:
$ GIT_SKIP_TESTS='t[0-4]??? t91?? t9200.8' make test
to omit such tests. The value of the environment variable is a
SP separated list of patterns that tells which tests to skip,
and either can match the "t[0-9]{4}" part to skip the whole
test, or t[0-9]{4} followed by ".$number" to say which
particular test to skip.
Note that some tests in the existing test suite rely on previous
test item, so you cannot arbitrarily disable one and expect the
remainder of test to check what the test originally was intended
to check.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
I don't think anybody running tests needs to know they're
running init-db and creating a repository for testing.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|