Age | Commit message (Collapse) | Author |
|
Test scripts have been updated to remove assumptions that are not
portable between Git for POSIX and Git for Windows, or to skip ones
with expectations that are not satisfiable on Git for Windows.
* js/mingw-tests: (21 commits)
gitignore: ignore generated test-fake-ssh executable
mingw: do not bother to test funny file names
mingw: skip a test in t9130 that cannot pass on Windows
mingw: handle the missing POSIXPERM prereq in t9124
mingw: avoid illegal filename in t9118
mingw: mark t9100's test cases with appropriate prereqs
t0008: avoid absolute path
mingw: work around pwd issues in the tests
mingw: fix t9700's assumption about directory separators
mingw: skip test in t1508 that fails due to path conversion
tests: turn off git-daemon tests if FIFOs are not available
mingw: disable mkfifo-based tests
mingw: accomodate t0060-path-utils for MSYS2
mingw: fix t5601-clone.sh
mingw: let lstat() fail with errno == ENOTDIR when appropriate
mingw: try to delete target directory before renaming
mingw: prepare the TMPDIR environment variable for shell scripts
mingw: factor out Windows specific environment setup
Git.pm: stop assuming that absolute paths start with a slash
mingw: do not trust MSYS2's MinGW gettext.sh
...
|
|
The emulated "yes" command used in our test scripts has been
tweaked not to spend too much time generating unnecessary output
that is not used, to help those who test on Windows where it would
not stop until it fills the pipe buffer due to lack of SIGPIPE.
* js/test-lib-windows-emulated-yes:
test-lib: limit the output of the yes utility
|
|
On Windows, there is no SIGPIPE. A consequence of this is that the
upstream process of a pipe does not notice the death of the downstream
process until the pipe buffer is full and writing more data returns an
error. This behavior is the reason for an annoying delay during the
execution of t7610-mergetool.sh: There are a number of test cases where
'yes' is invoked upstream. Since the utility is basically an endless
loop it runs, on Windows, until the pipe buffer is full. This does take
a few seconds.
The test suite has its own implementation of 'yes'. Modify it to produce
only a limited amount of output that is sufficient for the test suite.
The amount chosen should be sufficiently high for any test case, assuming
that future test cases will not exaggerate their demands of input from
an upstream 'yes' invocation.
[j6t: commit message]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The description for SANITY prerequisite the test suite uses has
been clarified both in the comment and in the implementation.
* jk/sanity:
test-lib: clarify and tighten SANITY
|
|
MSYS2 (the POSIX emulation layer used by Git for Windows' Bash) actually
has a working mkfifo. The only problem is that it is only emulating
named pipes through the MSYS2 runtime; The Win32 API has no idea about
named pipes, hence the Git executable cannot access those pipes either.
The symptom is that Git fails with a '<name>: No such file or directory'
because MSYS2 emulates named pipes through special-crafted '.lnk' files.
The solution is to tell the test suite explicitly that we cannot use
named pipes when we want to test on Windows.
This lets t4056-diff-order.sh, t9010-svn-fe.sh and t9300-fast-import.sh
pass.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
f400e51c (test-lib.sh: set prerequisite SANITY by testing what we
really need, 2015-01-27) improved the way SANITY prerequisite was
determined, but made the resulting code (incorrectly) imply that
SANITY is all about effects of permission bits of the containing
directory has on the files contained in it by the comment it added,
its log message and the actual tests.
State what SANITY is about more clearly in the comment, and test
that a file whose permission bits says should be unreadble truly
cannot be read.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Running tests with the "-x" option to make them verbose had some
unpleasant interactions with other features of the test suite.
* jk/test-with-x:
test-lib: disable trace when test is not verbose
test-lib: turn off "-x" tracing during chain-lint check
|
|
The "-x" test-script option turns on the shell's "-x"
tracing, which can help show why a particular test is
failing. Unfortunately, this can create false negatives in
some tests if they invoke a shell function with its stderr
redirected. t5512.10 is such a test, as it does:
test_must_fail git ls-remote refs*master >actual 2>&1 &&
test_cmp exp actual
The "actual" file gets the "-x" trace for the test_must_fail
function, which prevents it from matching the expected
output.
There's no way to avoid this without managing the
trace flag inside each sub-function, which isn't really a
workable solution. But unless you specifically care about
t5512.10, we can work around it by enabling tracing only for
the specific tests we want.
You can already do:
./t5512-ls-remote.sh -x --verbose-only=16
to see the trace only for a specific test. But that doesn't
_disable_ the tracing in the other tests; it just sends it
to /dev/null. However, there's no point in generating a
trace that the user won't see, so we can simply disable
tracing whenever it doesn't have a matching verbose flag.
The normal case of just "./t5512-ls-remote.sh -x" stays the
same, as "-x" already implies "--verbose" (and
"--verbose-only" overrides "--verbose", which is why this
works at all). And for our test, we need only check
$verbose, as maybe_setup_verbose will have already
set that flag based on the $verbose_only list).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that GIT_TEST_CHAIN_LINT is on by default, running:
./t0000-basic.sh -x --verbose-only=1
starts with:
expecting success:
find .git/objects -type f -print >should-be-empty &&
test_line_count = 0 should-be-empty
+ exit 117
error: last command exited with $?=117
+ find .git/objects -type f -print
+ test_line_count = 0 should-be-empty
+ test 3 != 3
+ wc -l
+ test 0 = 0
ok 1 - .git/objects should be empty after git init in an empty repo
This is confusing, as the "exit 117" line and the error line
(which is printed in red, no less!) are not part of the test
at all, but are rather in the separate chain-lint test_eval.
Let's unset the "trace" variable when eval-ing the chain
lint check, which avoids this.
Note that we cannot just do a one-shot variable like:
trace= test_eval ...
as the behavior of one-shot variables for function calls
is not portable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An ancient test framework enhancement to allow color was not
entirely correct; this makes it work even when tput needs to read
from the ~/.terminfo under the user's real HOME directory.
* rh/test-color-avoid-terminfo-in-original-home:
test-lib.sh: fix color support when tput needs ~/.terminfo
Revert "test-lib.sh: do tests for color support after changing HOME"
|
|
If tput needs ~/.terminfo for the current $TERM, then tput will
succeed before HOME is changed to $TRASH_DIRECTORY (causing color to
be set to 't') but fail afterward.
One possible way to fix this is to treat HOME like TERM: back up the
original value and temporarily restore it before say_color() runs
tput.
Instead, pre-compute and save the color control sequences before
changing either TERM or HOME. Use the saved control sequences in
say_color() rather than call tput each time. This avoids the need to
back up and restore the TERM and HOME variables, and it avoids the
overhead of a subshell and two invocations of tput per call to
say_color().
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit 102fc80d32094ad6598b17ab9d607516ee8edc4a.
There are two issues with that commit:
* It is buggy. In pseudocode, it is doing:
color is set || TERM != dumb && color works && color=t
when it should be doing:
color is set || { TERM != dumb && color works && color=t }
* It unnecessarily disables color when tput needs to read
~/.terminfo to get the control sequences.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Developer support to automatically detect broken &&-chain in the
test scripts is now turned on by default.
* jk/test-chain-lint:
test-lib: turn on GIT_TEST_CHAIN_LINT by default
t7502-commit.sh: fix a broken and-chain
|
|
Now that the feature has had time to prove itself, and any
topics in flight have had a chance to clean up any broken
&&-chains, we can flip this feature on by default. This
makes one less thing submitters need to configure or check
before sending their patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
People often forget to chain the commands in their test together
with &&, leaving a failure from an earlier command in the test go
unnoticed. The new GIT_TEST_CHAIN_LINT mechanism allows you to
catch such a mistake more easily.
* jk/test-chain-lint: (36 commits)
t9001: drop save_confirm helper
t0020: use test_* helpers instead of hand-rolled messages
t: simplify loop exit-code status variables
t: fix some trivial cases of ignored exit codes in loops
t7701: fix ignored exit code inside loop
t3305: fix ignored exit code inside loop
t0020: fix ignored exit code inside loops
perf-lib: fix ignored exit code inside loop
t6039: fix broken && chain
t9158, t9161: fix broken &&-chain in git-svn tests
t9104: fix test for following larger parents
t4104: drop hand-rolled error reporting
t0005: fix broken &&-chains
t7004: fix embedded single-quotes
t0050: appease --chain-lint
t9001: use test_when_finished
t4117: use modern test_* helpers
t6034: use modern test_* helpers
t1301: use modern test_* helpers
t0020: use modern test_* helpers
...
|
|
It's easy to miss an "&&"-chain in a test script, like:
test_expect_success 'check something important' '
cmd1 &&
cmd2
cmd3
'
The test harness will notice if cmd3 fails, but a failure of
cmd1 or cmd2 will go unnoticed, as their exit status is lost
after cmd3 runs.
The toy example above is easy to spot because the "cmds" are
all the same length, but real code is much more complicated.
It's also difficult to detect these situations by statically
analyzing the shell code with regexps (like the
check-non-portable-shell script does); there's too much
context required to know whether a &&-chain is appropriate
on a given line or not.
This patch instead lets the shell check each test by
sticking a command with a specific and unusual return code
at the top of each test, like:
(exit 117) &&
cmd1 &&
cmd2
cmd3
In a well-formed test, the non-zero exit from the first
command prevents any of the rest from being run, and the
test's exit code is 117. In a bad test (like the one above),
the 117 is lost, and cmd3 is run.
When we encounter a failure of this check, we abort the test
script entirely. For one thing, we have no clue which subset
of the commands in the test snippet were actually run.
Running further tests would be pointless, because we're now
in an unknown state. And two, this is not a "test failure"
in the traditional sense. The test script is buggy, not the
code it is testing. We should be able to fix these problems
in the script once, and not have them come back later as a
regression in git's code.
After checking a test snippet for --chain-lint, we do still
run the test itself. We could actually have a pure-lint
mode which just checks each test, but there are a few
reasons not to. One, because the tests are executing
arbitrary code, which could impact the later environment
(e.g., that could impact which set of tests we run at all).
And two, because a pure-lint mode would still be expensive
to run, because a significant amount of code runs outside of
the test_expect_* blocks. Instead, this option is designed
to be used as part of a normal test suite run, where it adds
very little overhead.
Turning on this option detects quite a few problems in
existing tests, which will be fixed in subsequent patches.
However, there are a number of places it cannot reach:
- it cannot find a failure to break out of loops on error,
like:
cmd1 &&
for i in a b c; do
cmd2 $i
done &&
cmd3
which will not notice failures of "cmd2 a" or "cmd b"
- it cannot find a missing &&-chain inside a block or
subfunction, like:
foo () {
cmd1
cmd2
}
foo &&
bar
which will not notice a failure of cmd1.
- it only checks tests that you run; every platform will
have some tests skipped due to missing prequisites,
so it's impossible to say from one run that the test
suite is free of broken &&-chains. However, all tests get
run by _somebody_, so eventually we will notice problems.
- it does not operate on test_when_finished or prerequisite
blocks. It could, but these tends to be much shorter and
less of a problem, so I punted on them in this patch.
This patch was inspired by an earlier patch by Jonathan
Nieder:
http://article.gmane.org/gmane.comp.version-control.git/235913
This implementation and all bugs are mine.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We use this to test http pushing with a restricted
commandline. Other scripts (like t5551, which does http
fetching) will want to use it, too.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If you run a test script like:
GIT_TRACE=1 ./t0061-run-command.sh
you may get test failures, because some tests capture and
check the stderr output from git commands (and with
GIT_TRACE set to 1, the trace output will be included
there).
When we see GIT_TRACE set like this, we print a warning to
the user. However, we can do even better than that by just
pointing it to descriptor 4, which all tests leave connected
to the test script's stderr. That's likely what the user
intended (and any scripts that do want to see GIT_TRACE
output will set GIT_TRACE themselves).
Not only does this avoid false negatives in the tests, but
it means the user will actually see trace output for git
calls that redirect their stderr (whereas before, it was
sometimes confusingly buried in a file).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Right now if a test script receives SIGINT (e.g., because a
test was hanging and the user hit ^C), the shell exits
immediately. This can be annoying if the test script did any
global setup, like starting apache or git-daemon, as it will
not have an opportunity to clean up after itself. A
subsequent run of the test won't be able to start its own
daemon, and will either fail or skip the tests.
Instead, let's trap SIGINT to make sure we do a clean
shutdown, and just chain it to a normal exit (which will
trigger any cleanup).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The tests that wanted to see that file becomes unreadable after
running "chmod a-r file", and the tests that wanted to make sure it
is not run as root, we used "can we write into the / directory?" as
a cheap substitute, but on some platforms that is not a good
heuristics. The tests and their prerequisites have been updated to
check what they really require.
* jk/sanity:
test-lib.sh: set prerequisite SANITY by testing what we really need
tests: correct misuses of POSIXPERM
t/lib-httpd: switch SANITY check for NOT_ROOT
|
|
The tests that wanted to see that file becomes unreadable after
running "chmod a-r file", and the tests that wanted to make sure it
is not run as root, we used "can we write into the / directory?" as
a cheap substitute, but on some platforms that is not a good
heuristics. The tests and their prerequisites have been updated to
check what they really require.
* jk/sanity:
test-lib.sh: set prerequisite SANITY by testing what we really need
tests: correct misuses of POSIXPERM
t/lib-httpd: switch SANITY check for NOT_ROOT
|
|
What we wanted out of the SANITY precondition is that the filesystem
behaves sensibly with permission bits settings.
- You should not be able to remove a file in a read-only directory,
- You should not be able to tell if a file in a directory exists if
the directory lacks read or execute permission bits.
We used to cheat by approximating that condition with "is the /
writable?" test and/or "are we running as root?" test. Neither test
is sufficient or appropriate in environments like Cygwin.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The SANITY prerequisite is really about whether the
filesystem will respect the permissions we set, and being
root is only one part of that. But the httpd tests really
just care about not being root, as they are trying to avoid
weirdness in apache (see a1a3011 for details).
Let's switch out SANITY for a new NOT_ROOT prerequisite,
which will let us tweak SANITY more freely.
We implement NOT_ROOT by checking `id -u`, which is in POSIX
and seems to be available even on MSYS. Note that we cannot
just call this "ROOT" and ask for "!ROOT". The possible
outcomes are:
1. we know we are root
2. we know we are not root
3. we could not tell, because `id` was not available
We should conservatively treat (3) as "does not have the
prerequisite", which means that a naive negation would not
work.
Helped-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If ncurses needs ~/.terminfo for the current $TERM, then tput will
succeed before changing HOME to $TRASH_DIRECTORY but fail afterward.
Move the tests that determine whether there is color support after
changing HOME so that color=t is set if and only if tput would succeed
when say_color() is run.
Note that color=t is now set after --no-color is processed, so the
condition to set color=t has changed: it is now set only if
color has not already been set to the empty string by --no-color.
This disables color support for those that need ~/.terminfo for
their TERM, but it's better than filling the screen with:
tput: unknown terminal "custom-terminal-name-here"
An alternative would be to symlink or copy the user's terminfo
database into $TRASH_DIRECTORY, but this is tricky due to the lack of
a standard name for the terminfo database (for example, instead of a
~/.terminfo directory, NetBSD uses a ~/.terminfo.cdb database file).
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
(see Documentation/CodingGuidelines)
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/test-asan:
t: support clang/gcc AddressSanitizer
|
|
* maint-2.1:
Git 2.1.4
Git 2.0.5
Git 1.9.5
Git 1.8.5.6
fsck: complain about NTFS ".git" aliases in trees
read-cache: optionally disallow NTFS .git variants
path: add is_ntfs_dotgit() helper
fsck: complain about HFS+ ".git" aliases in trees
read-cache: optionally disallow HFS+ .git variants
utf8: add is_hfs_dotgit() helper
fsck: notice .git case-insensitively
t1450: refactor ".", "..", and ".git" fsck tests
verify_dotfile(): reject .git case-insensitively
read-tree: add tests for confusing paths like ".." and ".git"
unpack-trees: propagate errors adding entries to the index
|
|
* maint-2.0:
Git 2.0.5
Git 1.9.5
Git 1.8.5.6
fsck: complain about NTFS ".git" aliases in trees
read-cache: optionally disallow NTFS .git variants
path: add is_ntfs_dotgit() helper
fsck: complain about HFS+ ".git" aliases in trees
read-cache: optionally disallow HFS+ .git variants
utf8: add is_hfs_dotgit() helper
fsck: notice .git case-insensitively
t1450: refactor ".", "..", and ".git" fsck tests
verify_dotfile(): reject .git case-insensitively
read-tree: add tests for confusing paths like ".." and ".git"
unpack-trees: propagate errors adding entries to the index
|
|
* maint-1.9:
Git 1.9.5
Git 1.8.5.6
fsck: complain about NTFS ".git" aliases in trees
read-cache: optionally disallow NTFS .git variants
path: add is_ntfs_dotgit() helper
fsck: complain about HFS+ ".git" aliases in trees
read-cache: optionally disallow HFS+ .git variants
utf8: add is_hfs_dotgit() helper
fsck: notice .git case-insensitively
t1450: refactor ".", "..", and ".git" fsck tests
verify_dotfile(): reject .git case-insensitively
read-tree: add tests for confusing paths like ".." and ".git"
unpack-trees: propagate errors adding entries to the index
|
|
* maint-1.8.5:
Git 1.8.5.6
fsck: complain about NTFS ".git" aliases in trees
read-cache: optionally disallow NTFS .git variants
path: add is_ntfs_dotgit() helper
fsck: complain about HFS+ ".git" aliases in trees
read-cache: optionally disallow HFS+ .git variants
utf8: add is_hfs_dotgit() helper
fsck: notice .git case-insensitively
t1450: refactor ".", "..", and ".git" fsck tests
verify_dotfile(): reject .git case-insensitively
read-tree: add tests for confusing paths like ".." and ".git"
unpack-trees: propagate errors adding entries to the index
|
|
The point of disallowing ".git" in the index is that we
would never want to accidentally overwrite files in the
repository directory. But this means we need to respect the
filesystem's idea of when two paths are equal. The prior
commit added a helper to make such a comparison for HFS+;
let's use it in verify_path.
We make this check optional for two reasons:
1. It restricts the set of allowable filenames, which is
unnecessary for people who are not on HFS+. In practice
this probably doesn't matter, though, as the restricted
names are rather obscure and almost certainly would
never come up in practice.
2. It has a minor performance penalty for every path we
insert into the index.
This patch ties the check to the core.protectHFS config
option. Though this is expected to be most useful on OS X,
we allow it to be set everywhere, as HFS+ may be mounted on
other platforms. The variable does default to on for OS X,
though.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When git is compiled with "-fsanitize=address" (using clang
or gcc >= 4.8), all invocations of git will check for buffer
overflows. This is similar to running with valgrind, except
that it is more thorough (because of the compiler support,
function-local buffers can be checked, too) and runs much
faster (making it much less painful to run the whole test
suite with the checks turned on).
Unlike valgrind, the magic happens at compile-time, so we
don't need the same infrastructure in the test suite that we
did to support --valgrind. But there are two things we can
help with:
1. On some platforms, the leak-detector is on by default,
and causes every invocation of "git init" (and thus
every test script) to fail. Since running git with
the leak detector is pointless, let's shut it off
automatically in the tests, unless the user has already
configured it.
2. When apache runs a CGI, it clears the environment of
unknown variables. This means that the $ASAN_OPTIONS
config doesn't make it to git-http-backend, and it
dies due to the leak detector. Let's mark the variable
as OK for apache to pass.
With these two changes, running
make CC=clang CFLAGS=-fsanitize=address test
works out of the box.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Usually running a test under "-v" makes it clear which
command is failing. However, sometimes it can be useful to
also see a complete trace of the shell commands being run in
the test. You can do so without any support from the test
suite by running "sh -x tXXXX-foo.sh". However, this
produces quite a large bit of output, as we see a trace of
the entire test suite.
This patch instead introduces a "-x" option to the test
scripts (i.e., "./tXXXX-foo.sh -x"). When enabled, this
turns on "set -x" only for the tests themselves. This can
still be a bit verbose, but should keep things to a more
manageable level. You can even use "--verbose-only" to see
the trace only for a specific test.
The implementation is a little invasive. We turn on the "set
-x" inside the "eval" of the test code. This lets the eval
itself avoid being reported in the trace (which would be
long, and redundant with the verbose listing we already
showed). And then after the eval runs, we do some trickery
with stderr to avoid showing the "set +x" to the user.
We also show traces for test_cleanup functions (since they
can impact the test outcome, too). However, we do avoid
running the noop ":" cleanup (the default if the test does
not use test_cleanup at all), as it creates unnecessary
noise in the "set -x" output.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow "git push" request to be signed, so that it can be verified and
audited, using the GPG signature of the person who pushed, that the
tips of branches at a public repository really point the commits
the pusher wanted to, without having to "trust" the server.
* jc/push-cert: (24 commits)
receive-pack::hmac_sha1(): copy the entire SHA-1 hash out
signed push: allow stale nonce in stateless mode
signed push: teach smart-HTTP to pass "git push --signed" around
signed push: fortify against replay attacks
signed push: add "pushee" header to push certificate
signed push: remove duplicated protocol info
send-pack: send feature request on push-cert packet
receive-pack: GPG-validate push certificates
push: the beginning of "git push --signed"
pack-protocol doc: typofix for PKT-LINE
gpg-interface: move parse_signature() to where it should be
gpg-interface: move parse_gpg_output() to where it should be
send-pack: clarify that cmds_sent is a boolean
send-pack: refactor inspecting and resetting status and sending commands
send-pack: rename "new_refs" to "need_pack_data"
receive-pack: factor out capability string generation
send-pack: factor out capability string generation
send-pack: always send capabilities
send-pack: refactor decision to send update per ref
send-pack: move REF_STATUS_REJECT_NODELETE logic a bit higher
...
|
|
* tb/crlf-tests:
MinGW: update tests to handle a native eol of crlf
Makefile: propagate NATIVE_CRLF to C
t0027: Tests for core.eol=native, eol=lf, eol=crlf
|
|
The "--signed" option received by "git push" is first passed to the
transport layer, which the native transport directly uses to notice
that a push certificate needs to be sent. When the transport-helper
is involved, however, the option needs to be told to the helper with
set_helper_option(), and the helper needs to take necessary action.
For the smart-HTTP helper, the "necessary action" involves spawning
the "git send-pack" subprocess with the "--signed" option.
Once the above all gets wired in, the smart-HTTP transport now can
use the push certificate mechanism to authenticate its pushes.
Add a test that is modeled after tests for the native transport in
t5534-push-signed.sh to t5541-http-push-smart.sh. Update the test
Apache configuration to pass GNUPGHOME environment variable through.
As PassEnv would trigger warnings for an environment variable that
is not set, export it from test-lib.sh set to a harmless value when
GnuPG is not being used in the tests.
Note that the added test is deliberately loose and does not check
the nonce in this step. This is because the stateless RPC mode is
inevitably flaky and a nonce that comes back in the actual push
processing is one issued by a different process; if the two
interactions with the server crossed a second boundary, the nonces
will not match and such a check will fail. A later patch in the
series will work around this shortcoming.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have been using NOT_{MINGW,CYGWIN} test prerequisites long
before Peff invented support for negated prerequisites e.g. !MINGW
and we still add more uses of the former. Convert them to the
latter to avoid confusion.
* jc/not-mingw-cygwin:
test prerequisites: enumerate with commas
test prerequisites: eradicate NOT_FOO
|
|
Some of the tests were written with the assumption that the native
eol would always be lf. After defining NATIVE_CRLF on MinGW, these
tests began failing. This change will update the tests to also
handle a native eol of crlf.
Signed-off-by: Brice Lambson <bricelam@live.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* kb/perf-trace:
api-trace.txt: add trace API documentation
progress: simplify performance measurement by using getnanotime()
wt-status: simplify performance measurement by using getnanotime()
git: add performance tracing for git's main() function to debug scripts
trace: add trace_performance facility to debug performance issues
trace: add high resolution timer function to debug performance issues
trace: add 'file:line' to all trace output
trace: move code around, in preparation to file:line output
trace: add current timestamp to all trace output
trace: disable additional trace output for unit tests
trace: add infrastructure to augment trace output with additional info
sha1_file: change GIT_TRACE_PACK_ACCESS logging to use trace API
Documentation/git.txt: improve documentation of 'GIT_TRACE*' variables
trace: improve trace performance
trace: remove redundant printf format attribute
trace: consistently name the format parameter
trace: move trace declarations from cache.h to new trace.h
|
|
Support for Back when bdccd3c1 (test-lib: allow negation of
prerequisites, 2012-11-14) introduced negated predicates
(e.g. "!MINGW,!CYGWIN"), we already had 5 test files that use
NOT_MINGW (and a few MINGW) as prerequisites.
Let's not add NOT_FOO and rewrite existing ones as !FOO for both
MINGW and CYGWIN.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some unit-tests use trace output to verify internal state, and unstable
output such as timestamps and line numbers are not useful there.
Disable additional trace output if GIT_TRACE_BARE is set.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* 'jc/test-lazy-prereq' (early part):
t3419: drop unnecessary NOT_EXPENSIVE pseudo-prerequisite
t3302: drop unnecessary NOT_EXPENSIVE pseudo-prerequisite
t3302: do not chdir around in the primary test process
t3302: coding style updates
test: turn USR_BIN_TIME into a lazy prerequisite
test: turn EXPENSIVE into a lazy prerequisite
|
|
Allow specifying only certain individual test pieces to be run
using a range notation (e.g. "t1234-test.sh --run='1-4 6 8 9-'").
* ib/test-selectively-run:
t0000-*.sh: fix the GIT_SKIP_TESTS sub-tests
test-lib: '--run' to run only specific tests
test-lib: tests skipped by GIT_SKIP_TESTS say so
test-lib: document short options in t/README
|
|
Two test scripts (t3302 and t3419) had copy & paste code to set
USR_BIN_TIME prerequisite. Use the test_lazy_prereq helper to define
them in the common t/test-lib.sh.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Two test scripts (t0021 and t5551) had copy & paste code to set
EXPENSIVE prerequisite. Use the test_lazy_prereq helper to define
them in the common t/test-lib.sh.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow better control of the set of tests that will be executed for a
single test suite. Mostly useful while debugging or developing as it
allows to focus on a specific test.
Signed-off-by: Ilya Bobyr <ilya.bobyr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We used to show "(missing )" next to tests skipped because they are
specified in GIT_SKIP_TESTS. Use "(GIT_SKIP_TESTS)" instead.
Plus tests that check basic GIT_SKIP_TESTS functions.
Signed-off-by: Ilya Bobyr <ilya.bobyr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Turning on this variable can be useful when debugging http
tests. It does break a few tests in t5541, but it is not
a variable that the user is likely to have enabled
accidentally.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/tests-cleanup:
t0001: drop subshells just for "cd"
t0001: drop useless subshells
t0001: use test_must_fail
t0001: use test_config_global
t0001: use test_path_is_*
t0001: make symlink reinit test more careful
t: prefer "git config --file" to GIT_CONFIG
t: prefer "git config --file" to GIT_CONFIG with test_must_fail
t: stop using GIT_CONFIG to cross repo boundaries
t: drop useless sane_unset GIT_* calls
t/test-lib: drop redundant unset of GIT_CONFIG
t/Makefile: stop setting GIT_CONFIG
|
|
* us/printf-not-echo:
test-lib.sh: do not "echo" caller-supplied strings
rebase -i: do not "echo" random user-supplied strings
|